Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 335 insertions, 0 deletions

diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
new file mode 100644
index 000000000..b2495fa80
--- /dev/null
+++ b/drivers/net/usb/lg-vl600.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ethernet interface part of the LG VL600 LTE modem (4G dongle)
+ *
+ * Copyright (C) 2011 Intel Corporation
+ * Author: Andrzej Zaborowski <balrogg@gmail.com>
+ */
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/module.h>
+
+/*
+ * The device has a CDC ACM port for modem control (it claims to be
+ * CDC ACM anyway) and a CDC Ethernet port for actual network data.
+ * It will however ignore data on both ports that is not encapsulated
+ * in a specific way, any data returned is also encapsulated the same
+ * way.  The headers don't seem to follow any popular standard.
+ *
+ * This driver adds and strips these headers from the ethernet frames
+ * sent/received from the CDC Ethernet port.  The proprietary header
+ * replaces the standard ethernet header in a packet so only actual
+ * ethernet frames are allowed.  The headers allow some form of
+ * multiplexing by using non standard values of the .h_proto field.
+ * Windows/Mac drivers do send a couple of such frames to the device
+ * during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
+ * seems to be) a flag in the .dummy_flags.  This doesn't seem necessary
+ * for modem operation but can possibly be used for GPS or other functions.
+ */
+
+struct vl600_frame_hdr {
+	__le32 len;
+	__le32 serial;
+	__le32 pkt_cnt;
+	__le32 dummy_flags;
+	__le32 dummy;
+	__le32 magic;
+} __attribute__((packed));
+
+struct vl600_pkt_hdr {
+	__le32 dummy[2];
+	__le32 len;
+	__be16 h_proto;
+} __attribute__((packed));
+
+struct vl600_state {
+	struct sk_buff *current_rx_buf;
+};
+
+static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	struct vl600_state *s = kzalloc(sizeof(struct vl600_state), GFP_KERNEL);
+
+	if (!s)
+		return -ENOMEM;
+
+	ret = usbnet_cdc_bind(dev, intf);
+	if (ret) {
+		kfree(s);
+		return ret;
+	}
+
+	dev->driver_priv = s;
+
+	/* ARP packets don't go through, but they're also of no use.  The
+	 * subnet has only two hosts anyway: us and the gateway / DHCP
+	 * server (probably simulated by modem firmware or network operator)
+	 * whose address changes every time we connect to the intarwebz and
+	 * who doesn't bother answering ARP requests either.  So hardware
+	 * addresses have no meaning, the destination and the source of every
+	 * packet depend only on whether it is on the IN or OUT endpoint.  */
+	dev->net->flags |= IFF_NOARP;
+	/* IPv6 NDP relies on multicast.  Enable it by default. */
+	dev->net->flags |= IFF_MULTICAST;
+
+	return ret;
+}
+
+static void vl600_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct vl600_state *s = dev->driver_priv;
+
+	dev_kfree_skb(s->current_rx_buf);
+	kfree(s);
+
+	return usbnet_cdc_unbind(dev, intf);
+}
+
+static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	struct ethhdr *ethhdr;
+	int packet_len, count;
+	struct sk_buff *buf = skb;
+	struct sk_buff *clone;
+	struct vl600_state *s = dev->driver_priv;
+
+	/* Frame lengths are generally 4B multiplies but every couple of
+	 * hours there's an odd number of bytes sized yet correct frame,
+	 * so don't require this.  */
+
+	/* Allow a packet (or multiple packets batched together) to be
+	 * split across many frames.  We don't allow a new batch to
+	 * begin in the same frame another one is ending however, and no
+	 * leading or trailing pad bytes.  */
+	if (s->current_rx_buf) {
+		frame = (struct vl600_frame_hdr *) s->current_rx_buf->data;
+		if (skb->len + s->current_rx_buf->len >
+				le32_to_cpup(&frame->len)) {
+			netif_err(dev, ifup, dev->net, "Fragment too long\n");
+			dev->net->stats.rx_length_errors++;
+			goto error;
+		}
+
+		buf = s->current_rx_buf;
+		skb_put_data(buf, skb->data, skb->len);
+	} else if (skb->len < 4) {
+		netif_err(dev, ifup, dev->net, "Frame too short\n");
+		dev->net->stats.rx_length_errors++;
+		goto error;
+	}
+
+	frame = (struct vl600_frame_hdr *) buf->data;
+	/* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+	 * otherwise we may run out of memory w/a bad packet */
+	if (ntohl(frame->magic) != 0x53544448 &&
+			ntohl(frame->magic) != 0x44544d48)
+		goto error;
+
+	if (buf->len < sizeof(*frame) ||
+			buf->len != le32_to_cpup(&frame->len)) {
+		/* Save this fragment for later assembly */
+		if (s->current_rx_buf)
+			return 0;
+
+		s->current_rx_buf = skb_copy_expand(skb, 0,
+				le32_to_cpup(&frame->len), GFP_ATOMIC);
+		if (!s->current_rx_buf)
+			dev->net->stats.rx_errors++;
+
+		return 0;
+	}
+
+	count = le32_to_cpup(&frame->pkt_cnt);
+
+	skb_pull(buf, sizeof(*frame));
+
+	while (count--) {
+		if (buf->len < sizeof(*packet)) {
+			netif_err(dev, ifup, dev->net, "Packet too short\n");
+			goto error;
+		}
+
+		packet = (struct vl600_pkt_hdr *) buf->data;
+		packet_len = sizeof(*packet) + le32_to_cpup(&packet->len);
+		if (packet_len > buf->len) {
+			netif_err(dev, ifup, dev->net,
+					"Bad packet length stored in header\n");
+			goto error;
+		}
+
+		/* Packet header is same size as the ethernet header
+		 * (sizeof(*packet) == sizeof(*ethhdr)), additionally
+		 * the h_proto field is in the same place so we just leave it
+		 * alone and fill in the remaining fields.
+		 */
+		ethhdr = (struct ethhdr *) skb->data;
+		if (be16_to_cpup(&ethhdr->h_proto) == ETH_P_ARP &&
+				buf->len > 0x26) {
+			/* Copy the addresses from packet contents */
+			memcpy(ethhdr->h_source,
+					&buf->data[sizeof(*ethhdr) + 0x8],
+					ETH_ALEN);
+			memcpy(ethhdr->h_dest,
+					&buf->data[sizeof(*ethhdr) + 0x12],
+					ETH_ALEN);
+		} else {
+			eth_zero_addr(ethhdr->h_source);
+			memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+			/* Inbound IPv6 packets have an IPv4 ethertype (0x800)
+			 * for some reason.  Peek at the L3 header to check
+			 * for IPv6 packets, and set the ethertype to IPv6
+			 * (0x86dd) so Linux can understand it.
+			 */
+			if ((buf->data[sizeof(*ethhdr)] & 0xf0) == 0x60)
+				ethhdr->h_proto = htons(ETH_P_IPV6);
+		}
+
+		if (count) {
+			/* Not the last packet in this batch */
+			clone = skb_clone(buf, GFP_ATOMIC);
+			if (!clone)
+				goto error;
+
+			skb_trim(clone, packet_len);
+			usbnet_skb_return(dev, clone);
+
+			skb_pull(buf, (packet_len + 3) & ~3);
+		} else {
+			skb_trim(buf, packet_len);
+
+			if (s->current_rx_buf) {
+				usbnet_skb_return(dev, buf);
+				s->current_rx_buf = NULL;
+				return 0;
+			}
+
+			return 1;
+		}
+	}
+
+error:
+	if (s->current_rx_buf) {
+		dev_kfree_skb_any(s->current_rx_buf);
+		s->current_rx_buf = NULL;
+	}
+	dev->net->stats.rx_errors++;
+	return 0;
+}
+
+static struct sk_buff *vl600_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *ret;
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	static uint32_t serial = 1;
+	int orig_len = skb->len - sizeof(struct ethhdr);
+	int full_len = (skb->len + sizeof(struct vl600_frame_hdr) + 3) & ~3;
+
+	frame = (struct vl600_frame_hdr *) skb->data;
+	if (skb->len > sizeof(*frame) && skb->len == le32_to_cpup(&frame->len))
+		return skb; /* Already encapsulated? */
+
+	if (skb->len < sizeof(struct ethhdr))
+		/* Drop, device can only deal with ethernet packets */
+		return NULL;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if (tailroom >= full_len - skb->len - sizeof(*frame) &&
+				headroom >= sizeof(*frame))
+			/* There's enough head and tail room */
+			goto encapsulate;
+
+		if (headroom + tailroom + skb->len >= full_len) {
+			/* There's enough total room, just readjust */
+			skb->data = memmove(skb->head + sizeof(*frame),
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto encapsulate;
+		}
+	}
+
+	/* Alloc a new skb with the required size */
+	ret = skb_copy_expand(skb, sizeof(struct vl600_frame_hdr), full_len -
+			skb->len - sizeof(struct vl600_frame_hdr), flags);
+	dev_kfree_skb_any(skb);
+	if (!ret)
+		return ret;
+	skb = ret;
+
+encapsulate:
+	/* Packet header is same size as ethernet packet header
+	 * (sizeof(*packet) == sizeof(struct ethhdr)), additionally the
+	 * h_proto field is in the same place so we just leave it alone and
+	 * overwrite the remaining fields.
+	 */
+	packet = (struct vl600_pkt_hdr *) skb->data;
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Since this modem only supports IPv4 and IPv6, just set all
+	 * frames to 0x0800 (ETH_P_IP)
+	 */
+	packet->h_proto = htons(ETH_P_IP);
+	memset(&packet->dummy, 0, sizeof(packet->dummy));
+	packet->len = cpu_to_le32(orig_len);
+
+	frame = skb_push(skb, sizeof(*frame));
+	memset(frame, 0, sizeof(*frame));
+	frame->len = cpu_to_le32(full_len);
+	frame->serial = cpu_to_le32(serial++);
+	frame->pkt_cnt = cpu_to_le32(1);
+
+	if (skb->len < full_len) /* Pad */
+		skb_put(skb, full_len - skb->len);
+
+	return skb;
+}
+
+static const struct driver_info	vl600_info = {
+	.description	= "LG VL600 modem",
+	.flags		= FLAG_RX_ASSEMBLE | FLAG_WWAN,
+	.bind		= vl600_bind,
+	.unbind		= vl600_unbind,
+	.status		= usbnet_cdc_status,
+	.rx_fixup	= vl600_rx_fixup,
+	.tx_fixup	= vl600_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+				USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+		.driver_info	= (unsigned long) &vl600_info,
+	},
+	{},	/* End */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver lg_vl600_driver = {
+	.name		= "lg-vl600",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(lg_vl600_driver);
+
+MODULE_AUTHOR("Anrzej Zaborowski");
+MODULE_DESCRIPTION("LG-VL600 modem's ethernet link");
+MODULE_LICENSE("GPL");