Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 440 insertions, 0 deletions

diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
new file mode 100644
index 000000000..8dd14d916
--- /dev/null
+++ b/drivers/net/wan/c101.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Moxa C101 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2000-2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * For information see <https://www.kernel.org/pub/linux/utils/net/hdlc/>
+ *
+ * Sources of information:
+ *    Hitachi HD64570 SCA User's Manual
+ *    Moxa C101 User's Manual
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hd64570.h"
+
+static const char *version = "Moxa C101 driver version: 1.15";
+static const char *devname = "C101";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define C101_PAGE 0x1D00
+#define C101_DTR 0x1E00
+#define C101_SCA 0x1F00
+#define C101_WINDOW_SIZE 0x2000
+#define C101_MAPPED_RAM_SIZE 0x4000
+
+#define RAM_SIZE (256 * 1024)
+#define TX_RING_BUFFERS 10
+#define RX_RING_BUFFERS ((RAM_SIZE - C101_WINDOW_SIZE) /		\
+			 (sizeof(pkt_desc) + HDLC_MAX_MRU) - TX_RING_BUFFERS)
+
+#define CLOCK_BASE 9830400	/* 9.8304 MHz */
+#define PAGE0_ALWAYS_MAPPED
+
+static char *hw;		/* pointer to hw=xxx command line string */
+
+typedef struct card_s {
+	struct net_device *dev;
+	spinlock_t lock;	/* TX lock */
+	u8 __iomem *win0base;	/* ISA window base address */
+	u32 phy_winbase;	/* ISA physical base address */
+	sync_serial_settings settings;
+	int rxpart;		/* partial frame received, next frame invalid*/
+	unsigned short encoding;
+	unsigned short parity;
+	u16 rx_ring_buffers;	/* number of buffers in a ring */
+	u16 tx_ring_buffers;
+	u16 buff_offset;	/* offset of first buffer of first channel */
+	u16 rxin;		/* rx ring buffer 'in' pointer */
+	u16 txin;		/* tx ring buffer 'in' and 'last' pointers */
+	u16 txlast;
+	u8 rxs, txs, tmc;	/* SCA registers */
+	u8 irq;			/* IRQ (3-15) */
+	u8 page;
+
+	struct card_s *next_card;
+} card_t;
+
+typedef card_t port_t;
+
+static card_t *first_card;
+static card_t **new_card = &first_card;
+
+#define sca_in(reg, card)	   readb((card)->win0base + C101_SCA + (reg))
+#define sca_out(value, reg, card)  writeb(value, (card)->win0base + C101_SCA + (reg))
+#define sca_inw(reg, card)	   readw((card)->win0base + C101_SCA + (reg))
+
+/* EDA address register must be set in EDAL, EDAH order - 8 bit ISA bus */
+#define sca_outw(value, reg, card) do { \
+	writeb(value & 0xFF, (card)->win0base + C101_SCA + (reg)); \
+	writeb((value >> 8) & 0xFF, (card)->win0base + C101_SCA + (reg + 1));\
+} while (0)
+
+#define port_to_card(port)	   (port)
+#define log_node(port)		   (0)
+#define phy_node(port)		   (0)
+#define winsize(card)		   (C101_WINDOW_SIZE)
+#define win0base(card)		   ((card)->win0base)
+#define winbase(card)		   ((card)->win0base + 0x2000)
+#define get_port(card, port)	   (card)
+static void sca_msci_intr(port_t *port);
+
+static inline u8 sca_get_page(card_t *card)
+{
+	return card->page;
+}
+
+static inline void openwin(card_t *card, u8 page)
+{
+	card->page = page;
+	writeb(page, card->win0base + C101_PAGE);
+}
+
+#include "hd64570.c"
+
+static inline void set_carrier(port_t *port)
+{
+	if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD))
+		netif_carrier_on(port_to_dev(port));
+	else
+		netif_carrier_off(port_to_dev(port));
+}
+
+static void sca_msci_intr(port_t *port)
+{
+	u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */
+
+	/* Reset MSCI TX underrun and CDCD (ignored) status bit */
+	sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port);
+
+	if (stat & ST1_UDRN) {
+		/* TX Underrun error detected */
+		port_to_dev(port)->stats.tx_errors++;
+		port_to_dev(port)->stats.tx_fifo_errors++;
+	}
+
+	stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */
+	/* Reset MSCI CDCD status bit - uses ch#2 DCD input */
+	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
+
+	if (stat & ST1_CDCD)
+		set_carrier(port);
+}
+
+static void c101_set_iface(port_t *port)
+{
+	u8 rxs = port->rxs & CLK_BRG_MASK;
+	u8 txs = port->txs & CLK_BRG_MASK;
+
+	switch (port->settings.clock_type) {
+	case CLOCK_INT:
+		rxs |= CLK_BRG_RX; /* TX clock */
+		txs |= CLK_RXCLK_TX; /* BRG output */
+		break;
+
+	case CLOCK_TXINT:
+		rxs |= CLK_LINE_RX; /* RXC input */
+		txs |= CLK_BRG_TX; /* BRG output */
+		break;
+
+	case CLOCK_TXFROMRX:
+		rxs |= CLK_LINE_RX; /* RXC input */
+		txs |= CLK_RXCLK_TX; /* RX clock */
+		break;
+
+	default:	/* EXTernal clock */
+		rxs |= CLK_LINE_RX; /* RXC input */
+		txs |= CLK_LINE_TX; /* TXC input */
+	}
+
+	port->rxs = rxs;
+	port->txs = txs;
+	sca_out(rxs, MSCI1_OFFSET + RXS, port);
+	sca_out(txs, MSCI1_OFFSET + TXS, port);
+	sca_set_port(port);
+}
+
+static int c101_open(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+	int result;
+
+	result = hdlc_open(dev);
+	if (result)
+		return result;
+
+	writeb(1, port->win0base + C101_DTR);
+	sca_out(0, MSCI1_OFFSET + CTL, port); /* RTS uses ch#2 output */
+	sca_open(dev);
+	/* DCD is connected to port 2 !@#$%^& - disable MSCI0 CDCD interrupt */
+	sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
+	sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
+
+	set_carrier(port);
+
+	/* enable MSCI1 CDCD interrupt */
+	sca_out(IE1_CDCD, MSCI1_OFFSET + IE1, port);
+	sca_out(IE0_RXINTA, MSCI1_OFFSET + IE0, port);
+	sca_out(0x48, IER0, port); /* TXINT #0 and RXINT #1 */
+	c101_set_iface(port);
+	return 0;
+}
+
+static int c101_close(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+
+	sca_close(dev);
+	writeb(0, port->win0base + C101_DTR);
+	sca_out(CTL_NORTS, MSCI1_OFFSET + CTL, port);
+	hdlc_close(dev);
+	return 0;
+}
+
+static int c101_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
+			       void __user *data, int cmd)
+{
+#ifdef DEBUG_RINGS
+	port_t *port = dev_to_port(dev);
+
+	if (cmd == SIOCDEVPRIVATE) {
+		sca_dump_rings(dev);
+		printk(KERN_DEBUG "MSCI1: ST: %02x %02x %02x %02x\n",
+		       sca_in(MSCI1_OFFSET + ST0, port),
+		       sca_in(MSCI1_OFFSET + ST1, port),
+		       sca_in(MSCI1_OFFSET + ST2, port),
+		       sca_in(MSCI1_OFFSET + ST3, port));
+		return 0;
+	}
+#endif
+
+	return -EOPNOTSUPP;
+}
+
+static int c101_ioctl(struct net_device *dev, struct if_settings *ifs)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifs->ifs_ifsu.sync;
+	port_t *port = dev_to_port(dev);
+
+	switch (ifs->type) {
+	case IF_GET_IFACE:
+		ifs->type = IF_IFACE_SYNC_SERIAL;
+		if (ifs->size < size) {
+			ifs->size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+		if (copy_to_user(line, &port->settings, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		if (new_line.clock_type != CLOCK_EXT &&
+		    new_line.clock_type != CLOCK_TXFROMRX &&
+		    new_line.clock_type != CLOCK_INT &&
+		    new_line.clock_type != CLOCK_TXINT)
+			return -EINVAL;	/* No such clock setting */
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		memcpy(&port->settings, &new_line, size); /* Update settings */
+		c101_set_iface(port);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifs);
+	}
+}
+
+static void c101_destroy_card(card_t *card)
+{
+	readb(card->win0base + C101_PAGE); /* Resets SCA? */
+
+	if (card->irq)
+		free_irq(card->irq, card);
+
+	if (card->win0base) {
+		iounmap(card->win0base);
+		release_mem_region(card->phy_winbase, C101_MAPPED_RAM_SIZE);
+	}
+
+	free_netdev(card->dev);
+
+	kfree(card);
+}
+
+static const struct net_device_ops c101_ops = {
+	.ndo_open       = c101_open,
+	.ndo_stop       = c101_close,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_siocwandev = c101_ioctl,
+	.ndo_siocdevprivate = c101_siocdevprivate,
+};
+
+static int __init c101_run(unsigned long irq, unsigned long winbase)
+{
+	struct net_device *dev;
+	hdlc_device *hdlc;
+	card_t *card;
+	int result;
+
+	if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
+		pr_err("invalid IRQ value\n");
+		return -ENODEV;
+	}
+
+	if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) != 0) {
+		pr_err("invalid RAM value\n");
+		return -ENODEV;
+	}
+
+	card = kzalloc(sizeof(card_t), GFP_KERNEL);
+	if (!card)
+		return -ENOBUFS;
+
+	card->dev = alloc_hdlcdev(card);
+	if (!card->dev) {
+		pr_err("unable to allocate memory\n");
+		kfree(card);
+		return -ENOBUFS;
+	}
+
+	if (request_irq(irq, sca_intr, 0, devname, card)) {
+		pr_err("could not allocate IRQ\n");
+		c101_destroy_card(card);
+		return -EBUSY;
+	}
+	card->irq = irq;
+
+	if (!request_mem_region(winbase, C101_MAPPED_RAM_SIZE, devname)) {
+		pr_err("could not request RAM window\n");
+		c101_destroy_card(card);
+		return -EBUSY;
+	}
+	card->phy_winbase = winbase;
+	card->win0base = ioremap(winbase, C101_MAPPED_RAM_SIZE);
+	if (!card->win0base) {
+		pr_err("could not map I/O address\n");
+		c101_destroy_card(card);
+		return -EFAULT;
+	}
+
+	card->tx_ring_buffers = TX_RING_BUFFERS;
+	card->rx_ring_buffers = RX_RING_BUFFERS;
+	card->buff_offset = C101_WINDOW_SIZE; /* Bytes 1D00-1FFF reserved */
+
+	readb(card->win0base + C101_PAGE); /* Resets SCA? */
+	udelay(100);
+	writeb(0, card->win0base + C101_PAGE);
+	writeb(0, card->win0base + C101_DTR); /* Power-up for RAM? */
+
+	sca_init(card, 0);
+
+	dev = port_to_dev(card);
+	hdlc = dev_to_hdlc(dev);
+
+	spin_lock_init(&card->lock);
+	dev->irq = irq;
+	dev->mem_start = winbase;
+	dev->mem_end = winbase + C101_MAPPED_RAM_SIZE - 1;
+	dev->tx_queue_len = 50;
+	dev->netdev_ops = &c101_ops;
+	hdlc->attach = sca_attach;
+	hdlc->xmit = sca_xmit;
+	card->settings.clock_type = CLOCK_EXT;
+
+	result = register_hdlc_device(dev);
+	if (result) {
+		pr_warn("unable to register hdlc device\n");
+		c101_destroy_card(card);
+		return result;
+	}
+
+	sca_init_port(card); /* Set up C101 memory */
+	set_carrier(card);
+
+	netdev_info(dev, "Moxa C101 on IRQ%u, using %u TX + %u RX packets rings\n",
+		    card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+
+	*new_card = card;
+	new_card = &card->next_card;
+	return 0;
+}
+
+static int __init c101_init(void)
+{
+	if (!hw) {
+#ifdef MODULE
+		pr_info("no card initialized\n");
+#endif
+		return -EINVAL;	/* no parameters specified, abort */
+	}
+
+	pr_info("%s\n", version);
+
+	do {
+		unsigned long irq, ram;
+
+		irq = simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		ram = simple_strtoul(hw, &hw, 0);
+
+		if (*hw == ':' || *hw == '\x0')
+			c101_run(irq, ram);
+
+		if (*hw == '\x0')
+			return first_card ? 0 : -EINVAL;
+	} while (*hw++ == ':');
+
+	pr_err("invalid hardware parameters\n");
+	return first_card ? 0 : -EINVAL;
+}
+
+static void __exit c101_cleanup(void)
+{
+	card_t *card = first_card;
+
+	while (card) {
+		card_t *ptr = card;
+
+		card = card->next_card;
+		unregister_hdlc_device(port_to_dev(ptr));
+		c101_destroy_card(ptr);
+	}
+}
+
+module_init(c101_init);
+module_exit(c101_cleanup);
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("Moxa C101 serial port driver");
+MODULE_LICENSE("GPL v2");
+module_param(hw, charp, 0444);
+MODULE_PARM_DESC(hw, "irq,ram:irq,...");