Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 2085 insertions, 0 deletions

diff --git a/drivers/nfc/pn544/Kconfig b/drivers/nfc/pn544/Kconfig
new file mode 100644
index 000000000..0fdc3108c
--- /dev/null
+++ b/drivers/nfc/pn544/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NFC_PN544
+	tristate
+	select CRC_CCITT
+	help
+	  NXP PN544 core driver.
+	  This is a driver based on the HCI NFC kernel layers and
+	  will thus not work with NXP libnfc library.
+
+config NFC_PN544_I2C
+	tristate "NXP PN544 device support (I2C)"
+	depends on NFC_HCI && I2C && NFC_SHDLC
+	select NFC_PN544
+	help
+	  This module adds support for the NXP pn544 i2c interface.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called pn544_i2c.
+	  Say N if unsure.
+
+config NFC_PN544_MEI
+	tristate "NXP PN544 device support (MEI)"
+	depends on NFC_HCI && NFC_MEI_PHY
+	select NFC_PN544
+	help
+	  This module adds support for the mei interface of adapters using
+	  NXP pn544 chipsets.  Select this if your pn544 chipset
+	  is handled by Intel's Management Engine Interface on your platform.
+
+	  If you choose to build a module, it'll be called pn544_mei.
+	  Say N if unsure.
diff --git a/drivers/nfc/pn544/Makefile b/drivers/nfc/pn544/Makefile
new file mode 100644
index 000000000..c013fd847
--- /dev/null
+++ b/drivers/nfc/pn544/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for PN544 HCI based NFC driver
+#
+
+pn544_i2c-objs  = i2c.o
+pn544_mei-objs  = mei.o
+
+obj-$(CONFIG_NFC_PN544)     += pn544.o
+obj-$(CONFIG_NFC_PN544_I2C) += pn544_i2c.o
+obj-$(CONFIG_NFC_PN544_MEI) += pn544_mei.o
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
new file mode 100644
index 000000000..9e754abcf
--- /dev/null
+++ b/drivers/nfc/pn544/i2c.c
@@ -0,0 +1,965 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C Link Layer for PN544 HCI based Driver
+ *
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+
+#include <asm/unaligned.h>
+
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+#include <net/nfc/nfc.h>
+
+#include "pn544.h"
+
+#define PN544_I2C_FRAME_HEADROOM 1
+#define PN544_I2C_FRAME_TAILROOM 2
+
+/* GPIO names */
+#define PN544_GPIO_NAME_IRQ "pn544_irq"
+#define PN544_GPIO_NAME_FW  "pn544_fw"
+#define PN544_GPIO_NAME_EN  "pn544_en"
+
+/* framing in HCI mode */
+#define PN544_HCI_I2C_LLC_LEN		1
+#define PN544_HCI_I2C_LLC_CRC		2
+#define PN544_HCI_I2C_LLC_LEN_CRC	(PN544_HCI_I2C_LLC_LEN + \
+					 PN544_HCI_I2C_LLC_CRC)
+#define PN544_HCI_I2C_LLC_MIN_SIZE	(1 + PN544_HCI_I2C_LLC_LEN_CRC)
+#define PN544_HCI_I2C_LLC_MAX_PAYLOAD	29
+#define PN544_HCI_I2C_LLC_MAX_SIZE	(PN544_HCI_I2C_LLC_LEN_CRC + 1 + \
+					 PN544_HCI_I2C_LLC_MAX_PAYLOAD)
+
+static const struct i2c_device_id pn544_hci_i2c_id_table[] = {
+	{"pn544", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
+
+static const struct acpi_device_id pn544_hci_i2c_acpi_match[] __maybe_unused = {
+	{"NXP5440", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match);
+
+#define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
+
+/*
+ * Exposed through the 4 most significant bytes
+ * from the HCI SW_VERSION first byte, a.k.a.
+ * SW RomLib.
+ */
+#define PN544_HW_VARIANT_C2 0xa
+#define PN544_HW_VARIANT_C3 0xb
+
+#define PN544_FW_CMD_RESET 0x01
+#define PN544_FW_CMD_WRITE 0x08
+#define PN544_FW_CMD_CHECK 0x06
+#define PN544_FW_CMD_SECURE_WRITE 0x0C
+#define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
+
+struct pn544_i2c_fw_frame_write {
+	u8 cmd;
+	u16 be_length;
+	u8 be_dest_addr[3];
+	u16 be_datalen;
+	u8 data[];
+} __packed;
+
+struct pn544_i2c_fw_frame_check {
+	u8 cmd;
+	u16 be_length;
+	u8 be_start_addr[3];
+	u16 be_datalen;
+	u16 be_crc;
+} __packed;
+
+struct pn544_i2c_fw_frame_response {
+	u8 status;
+	u16 be_length;
+} __packed;
+
+struct pn544_i2c_fw_blob {
+	u32 be_size;
+	u32 be_destaddr;
+	u8 data[];
+};
+
+struct pn544_i2c_fw_secure_frame {
+	u8 cmd;
+	u16 be_datalen;
+	u8 data[];
+} __packed;
+
+struct pn544_i2c_fw_secure_blob {
+	u64 header;
+	u8 data[];
+};
+
+#define PN544_FW_CMD_RESULT_TIMEOUT 0x01
+#define PN544_FW_CMD_RESULT_BAD_CRC 0x02
+#define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
+#define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
+#define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
+#define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
+#define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
+#define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
+#define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
+#define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
+#define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
+#define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
+#define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
+#define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
+
+#define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
+
+#define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7
+#define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE
+#define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8
+#define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
+					 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
+					 PN544_FW_WRITE_BUFFER_MAX_LEN)
+#define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
+#define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
+			PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
+#define PN544_FW_SECURE_FRAME_HEADER_LEN 3
+#define PN544_FW_SECURE_BLOB_HEADER_LEN 8
+
+#define FW_WORK_STATE_IDLE 1
+#define FW_WORK_STATE_START 2
+#define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
+#define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
+#define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
+
+struct pn544_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nfc_hci_dev *hdev;
+
+	struct gpio_desc *gpiod_en;
+	struct gpio_desc *gpiod_fw;
+
+	unsigned int en_polarity;
+
+	u8 hw_variant;
+
+	struct work_struct fw_work;
+	int fw_work_state;
+	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
+	const struct firmware *fw;
+	u32 fw_blob_dest_addr;
+	size_t fw_blob_size;
+	const u8 *fw_blob_data;
+	size_t fw_written;
+	size_t fw_size;
+
+	int fw_cmd_result;
+
+	int powered;
+	int run_mode;
+
+	int hard_fault;		/*
+				 * < 0 if hardware error occured (e.g. i2c err)
+				 * and prevents normal operation.
+				 */
+};
+
+#define I2C_DUMP_SKB(info, skb)					\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0);	\
+} while (0)
+
+static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
+{
+	int polarity, retry, ret;
+	static const char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
+	int count = sizeof(rset_cmd);
+
+	nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");
+
+	/* Disable fw download */
+	gpiod_set_value_cansleep(phy->gpiod_fw, 0);
+
+	for (polarity = 0; polarity < 2; polarity++) {
+		phy->en_polarity = polarity;
+		retry = 3;
+		while (retry--) {
+			/* power off */
+			gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+			usleep_range(10000, 15000);
+
+			/* power on */
+			gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
+			usleep_range(10000, 15000);
+
+			/* send reset */
+			dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n");
+			ret = i2c_master_send(phy->i2c_dev, rset_cmd, count);
+			if (ret == count) {
+				nfc_info(&phy->i2c_dev->dev,
+					 "nfc_en polarity : active %s\n",
+					 (polarity == 0 ? "low" : "high"));
+				goto out;
+			}
+		}
+	}
+
+	nfc_err(&phy->i2c_dev->dev,
+		"Could not detect nfc_en polarity, fallback to active high\n");
+
+out:
+	gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+	usleep_range(10000, 15000);
+}
+
+static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)
+{
+	gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0);
+	gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	phy->run_mode = run_mode;
+}
+
+static int pn544_hci_i2c_enable(void *phy_id)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+
+	pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE);
+
+	phy->powered = 1;
+
+	return 0;
+}
+
+static void pn544_hci_i2c_disable(void *phy_id)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+
+	gpiod_set_value_cansleep(phy->gpiod_fw, 0);
+	gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	phy->powered = 0;
+}
+
+static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb)
+{
+	u16 crc;
+	int len;
+
+	len = skb->len + 2;
+	*(u8 *)skb_push(skb, 1) = len;
+
+	crc = crc_ccitt(0xffff, skb->data, skb->len);
+	crc = ~crc;
+	skb_put_u8(skb, crc & 0xff);
+	skb_put_u8(skb, crc >> 8);
+}
+
+static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb)
+{
+	skb_pull(skb, PN544_I2C_FRAME_HEADROOM);
+	skb_trim(skb, PN544_I2C_FRAME_TAILROOM);
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct pn544_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	usleep_range(3000, 6000);
+
+	pn544_hci_i2c_add_len_crc(skb);
+
+	I2C_DUMP_SKB("i2c frame written", skb);
+
+	r = i2c_master_send(client, skb->data, skb->len);
+
+	if (r == -EREMOTEIO) {	/* Retry, chip was in standby */
+		usleep_range(6000, 10000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r >= 0) {
+		if (r != skb->len)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	pn544_hci_i2c_remove_len_crc(skb);
+
+	return r;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+	int len;
+	u16 crc;
+
+	len = buf[0] + 1;
+	crc = crc_ccitt(0xffff, buf, len - 2);
+	crc = ~crc;
+
+	if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
+		pr_err("CRC error 0x%x != 0x%x 0x%x\n",
+		       crc, buf[len - 1], buf[len - 2]);
+		pr_info("%s: BAD CRC\n", __func__);
+		print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+			       16, 2, buf, buflen, false);
+		return -EPERM;
+	}
+	return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1];
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, &len, 1);
+	if (r != 1) {
+		nfc_err(&client->dev, "cannot read len byte\n");
+		return -EREMOTEIO;
+	}
+
+	if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) ||
+	    (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) {
+		nfc_err(&client->dev, "invalid len byte\n");
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	*skb = alloc_skb(1 + len, GFP_KERNEL);
+	if (*skb == NULL) {
+		r = -ENOMEM;
+		goto flush;
+	}
+
+	skb_put_u8(*skb, len);
+
+	r = i2c_master_recv(client, skb_put(*skb, len), len);
+	if (r != len) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	I2C_DUMP_SKB("i2c frame read", *skb);
+
+	r = check_crc((*skb)->data, (*skb)->len);
+	if (r != 0) {
+		kfree_skb(*skb);
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	skb_pull(*skb, 1);
+	skb_trim(*skb, (*skb)->len - 2);
+
+	usleep_range(3000, 6000);
+
+	return 0;
+
+flush:
+	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+		r = -EREMOTEIO;
+
+	usleep_range(3000, 6000);
+
+	return r;
+}
+
+static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
+{
+	int r;
+	struct pn544_i2c_fw_frame_response response;
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, (char *) &response, sizeof(response));
+	if (r != sizeof(response)) {
+		nfc_err(&client->dev, "cannot read fw status\n");
+		return -EIO;
+	}
+
+	usleep_range(3000, 6000);
+
+	switch (response.status) {
+	case 0:
+		return 0;
+	case PN544_FW_CMD_RESULT_CHUNK_OK:
+		return response.status;
+	case PN544_FW_CMD_RESULT_TIMEOUT:
+		return -ETIMEDOUT;
+	case PN544_FW_CMD_RESULT_BAD_CRC:
+		return -ENODATA;
+	case PN544_FW_CMD_RESULT_ACCESS_DENIED:
+		return -EACCES;
+	case PN544_FW_CMD_RESULT_PROTOCOL_ERROR:
+		return -EPROTO;
+	case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
+		return -EINVAL;
+	case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
+		return -ENOTSUPP;
+	case PN544_FW_CMD_RESULT_INVALID_LENGTH:
+		return -EBADMSG;
+	case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
+		return -ENOKEY;
+	case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
+		return -EINVAL;
+	case PN544_FW_CMD_RESULT_MEMORY_ERROR:
+		return -ENOMEM;
+	case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
+		return -EACCES;
+	case PN544_FW_CMD_RESULT_WRITE_FAILED:
+	case PN544_FW_CMD_RESULT_CHUNK_ERROR:
+		return -EIO;
+	default:
+		return -EIO;
+	}
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. There are cases where we could loose the frame start synchronization.
+ * The frame format is len-data-crc, and corruption can occur anywhere while
+ * transiting on i2c bus, such that we could read an invalid len.
+ * In order to recover synchronization with the next frame, we must be sure
+ * to read the real amount of data without using the len byte. We do this by
+ * assuming the following:
+ * - the chip will always present only one single complete frame on the bus
+ *   before triggering the interrupt
+ * - the chip will not present a new frame until we have completely read
+ *   the previous one (or until we have handled the interrupt).
+ * The tricky case is when we read a corrupted len that is less than the real
+ * len. We must detect this here in order to determine that we need to flush
+ * the bus. This is the reason why we check the crc here.
+ */
+static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+	struct i2c_client *client;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	client = phy->i2c_dev;
+	dev_dbg(&client->dev, "IRQ\n");
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	if (phy->run_mode == PN544_FW_MODE) {
+		phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy);
+		schedule_work(&phy->fw_work);
+	} else {
+		r = pn544_hci_i2c_read(phy, &skb);
+		if (r == -EREMOTEIO) {
+			phy->hard_fault = r;
+
+			nfc_hci_recv_frame(phy->hdev, NULL);
+
+			return IRQ_HANDLED;
+		} else if ((r == -ENOMEM) || (r == -EBADMSG)) {
+			return IRQ_HANDLED;
+		}
+
+		nfc_hci_recv_frame(phy->hdev, skb);
+	}
+	return IRQ_HANDLED;
+}
+
+static const struct nfc_phy_ops i2c_phy_ops = {
+	.write = pn544_hci_i2c_write,
+	.enable = pn544_hci_i2c_enable,
+	.disable = pn544_hci_i2c_disable,
+};
+
+static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
+					u8 hw_variant)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+
+	pr_info("Starting Firmware Download (%s)\n", firmware_name);
+
+	strcpy(phy->firmware_name, firmware_name);
+
+	phy->hw_variant = hw_variant;
+	phy->fw_work_state = FW_WORK_STATE_START;
+
+	schedule_work(&phy->fw_work);
+
+	return 0;
+}
+
+static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy,
+					   int result)
+{
+	pr_info("Firmware Download Complete, result=%d\n", result);
+
+	pn544_hci_i2c_disable(phy);
+
+	phy->fw_work_state = FW_WORK_STATE_IDLE;
+
+	if (phy->fw) {
+		release_firmware(phy->fw);
+		phy->fw = NULL;
+	}
+
+	nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result);
+}
+
+static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr,
+				      const u8 *data, u16 datalen)
+{
+	u8 frame[PN544_FW_I2C_MAX_PAYLOAD];
+	struct pn544_i2c_fw_frame_write *framep;
+	u16 params_len;
+	int framelen;
+	int r;
+
+	if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN)
+		datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN;
+
+	framep = (struct pn544_i2c_fw_frame_write *) frame;
+
+	params_len = sizeof(framep->be_dest_addr) +
+		     sizeof(framep->be_datalen) + datalen;
+	framelen = params_len + sizeof(framep->cmd) +
+			     sizeof(framep->be_length);
+
+	framep->cmd = PN544_FW_CMD_WRITE;
+
+	put_unaligned_be16(params_len, &framep->be_length);
+
+	framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16;
+	framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8;
+	framep->be_dest_addr[2] = dest_addr & 0xff;
+
+	put_unaligned_be16(datalen, &framep->be_datalen);
+
+	memcpy(framep->data, data, datalen);
+
+	r = i2c_master_send(client, frame, framelen);
+
+	if (r == framelen)
+		return datalen;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+}
+
+static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr,
+				      const u8 *data, u16 datalen)
+{
+	struct pn544_i2c_fw_frame_check frame;
+	int r;
+	u16 crc;
+
+	/* calculate local crc for the data we want to check */
+	crc = crc_ccitt(0xffff, data, datalen);
+
+	frame.cmd = PN544_FW_CMD_CHECK;
+
+	put_unaligned_be16(sizeof(frame.be_start_addr) +
+			   sizeof(frame.be_datalen) + sizeof(frame.be_crc),
+			   &frame.be_length);
+
+	/* tell the chip the memory region to which our crc applies */
+	frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16;
+	frame.be_start_addr[1] = (start_addr & 0xff00) >> 8;
+	frame.be_start_addr[2] = start_addr & 0xff;
+
+	put_unaligned_be16(datalen, &frame.be_datalen);
+
+	/*
+	 * and give our local crc. Chip will calculate its own crc for the
+	 * region and compare with ours.
+	 */
+	put_unaligned_be16(crc, &frame.be_crc);
+
+	r = i2c_master_send(client, (const char *) &frame, sizeof(frame));
+
+	if (r == sizeof(frame))
+		return 0;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+}
+
+static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
+{
+	int r;
+
+	r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev,
+				       phy->fw_blob_dest_addr + phy->fw_written,
+				       phy->fw_blob_data + phy->fw_written,
+				       phy->fw_blob_size - phy->fw_written);
+	if (r < 0)
+		return r;
+
+	phy->fw_written += r;
+	phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER;
+
+	return 0;
+}
+
+static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
+					const u8 *data, u16 datalen)
+{
+	u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
+	struct pn544_i2c_fw_secure_frame *chunk;
+	int chunklen;
+	int r;
+
+	if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
+		datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
+
+	chunk = (struct pn544_i2c_fw_secure_frame *) buf;
+
+	chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
+
+	put_unaligned_be16(datalen, &chunk->be_datalen);
+
+	memcpy(chunk->data, data, datalen);
+
+	chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
+
+	r = i2c_master_send(phy->i2c_dev, buf, chunklen);
+
+	if (r == chunklen)
+		return datalen;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+
+}
+
+static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
+{
+	struct pn544_i2c_fw_secure_frame *framep;
+	int r;
+
+	framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
+	if (phy->fw_written == 0)
+		phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
+				+ PN544_FW_SECURE_FRAME_HEADER_LEN;
+
+	/* Only secure write command can be chunked*/
+	if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
+			framep->cmd != PN544_FW_CMD_SECURE_WRITE)
+		return -EINVAL;
+
+	/* The firmware also have other commands, we just send them directly */
+	if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
+		r = i2c_master_send(phy->i2c_dev,
+			(const char *) phy->fw_blob_data, phy->fw_blob_size);
+
+		if (r == phy->fw_blob_size)
+			goto exit;
+		else if (r < 0)
+			return r;
+		else
+			return -EIO;
+	}
+
+	r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
+				       phy->fw_blob_data + phy->fw_written,
+				       phy->fw_blob_size - phy->fw_written);
+	if (r < 0)
+		return r;
+
+exit:
+	phy->fw_written += r;
+	phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
+
+	/* SW reset command will not trig any response from PN544 */
+	if (framep->cmd == PN544_FW_CMD_RESET) {
+		pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
+		phy->fw_cmd_result = 0;
+		schedule_work(&phy->fw_work);
+	}
+
+	return 0;
+}
+
+static void pn544_hci_i2c_fw_work(struct work_struct *work)
+{
+	struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
+						fw_work);
+	int r;
+	struct pn544_i2c_fw_blob *blob;
+	struct pn544_i2c_fw_secure_blob *secure_blob;
+
+	switch (phy->fw_work_state) {
+	case FW_WORK_STATE_START:
+		pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
+
+		r = request_firmware(&phy->fw, phy->firmware_name,
+				     &phy->i2c_dev->dev);
+		if (r < 0)
+			goto exit_state_start;
+
+		phy->fw_written = 0;
+
+		switch (phy->hw_variant) {
+		case PN544_HW_VARIANT_C2:
+			blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
+			phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
+			phy->fw_blob_dest_addr = get_unaligned_be32(
+							&blob->be_destaddr);
+			phy->fw_blob_data = blob->data;
+
+			r = pn544_hci_i2c_fw_write_chunk(phy);
+			break;
+		case PN544_HW_VARIANT_C3:
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+								phy->fw->data;
+			phy->fw_blob_data = secure_blob->data;
+			phy->fw_size = phy->fw->size;
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			break;
+		default:
+			r = -ENOTSUPP;
+			break;
+		}
+
+exit_state_start:
+		if (r < 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	case FW_WORK_STATE_WAIT_WRITE_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_write_answer;
+
+		if (phy->fw_written == phy->fw_blob_size) {
+			r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev,
+						       phy->fw_blob_dest_addr,
+						       phy->fw_blob_data,
+						       phy->fw_blob_size);
+			if (r < 0)
+				goto exit_state_wait_write_answer;
+			phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER;
+			break;
+		}
+
+		r = pn544_hci_i2c_fw_write_chunk(phy);
+
+exit_state_wait_write_answer:
+		if (r < 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	case FW_WORK_STATE_WAIT_CHECK_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_check_answer;
+
+		blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data +
+		       phy->fw_blob_size);
+		phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
+		if (phy->fw_blob_size != 0) {
+			phy->fw_blob_dest_addr =
+					get_unaligned_be32(&blob->be_destaddr);
+			phy->fw_blob_data = blob->data;
+
+			phy->fw_written = 0;
+			r = pn544_hci_i2c_fw_write_chunk(phy);
+		}
+
+exit_state_wait_check_answer:
+		if (r < 0 || phy->fw_blob_size == 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_secure_write_answer;
+
+		if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			goto exit_state_wait_secure_write_answer;
+		}
+
+		if (phy->fw_written == phy->fw_blob_size) {
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+				(phy->fw_blob_data + phy->fw_blob_size);
+			phy->fw_size -= phy->fw_blob_size +
+				PN544_FW_SECURE_BLOB_HEADER_LEN;
+			if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
+					+ PN544_FW_SECURE_FRAME_HEADER_LEN) {
+				phy->fw_blob_data = secure_blob->data;
+
+				phy->fw_written = 0;
+				r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			}
+		}
+
+exit_state_wait_secure_write_answer:
+		if (r < 0 || phy->fw_size == 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
+static const struct acpi_gpio_params firmware_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_pn544_gpios[] = {
+	{ "enable-gpios", &enable_gpios, 1 },
+	{ "firmware-gpios", &firmware_gpios, 1 },
+	{ },
+};
+
+static int pn544_hci_i2c_probe(struct i2c_client *client,
+			       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct pn544_i2c_phy *phy;
+	int r = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work);
+	phy->fw_work_state = FW_WORK_STATE_IDLE;
+
+	phy->i2c_dev = client;
+	i2c_set_clientdata(client, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_pn544_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get EN GPIO */
+	phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_en)) {
+		nfc_err(dev, "Unable to get EN GPIO\n");
+		return PTR_ERR(phy->gpiod_en);
+	}
+
+	/* Get FW GPIO */
+	phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_fw)) {
+		nfc_err(dev, "Unable to get FW GPIO\n");
+		return PTR_ERR(phy->gpiod_fw);
+	}
+
+	pn544_hci_i2c_platform_init(phy);
+
+	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				      pn544_hci_i2c_irq_thread_fn,
+				      IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				      PN544_HCI_I2C_DRIVER_NAME, phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		return r;
+	}
+
+	r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+			    PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM,
+			    PN544_HCI_I2C_LLC_MAX_PAYLOAD,
+			    pn544_hci_i2c_fw_download, &phy->hdev);
+	if (r < 0)
+		return r;
+
+	return 0;
+}
+
+static void pn544_hci_i2c_remove(struct i2c_client *client)
+{
+	struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
+
+	cancel_work_sync(&phy->fw_work);
+	if (phy->fw_work_state != FW_WORK_STATE_IDLE)
+		pn544_hci_i2c_fw_work_complete(phy, -ENODEV);
+
+	pn544_hci_remove(phy->hdev);
+
+	if (phy->powered)
+		pn544_hci_i2c_disable(phy);
+}
+
+static const struct of_device_id of_pn544_i2c_match[] __maybe_unused = {
+	{ .compatible = "nxp,pn544-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pn544_i2c_match);
+
+static struct i2c_driver pn544_hci_i2c_driver = {
+	.driver = {
+		   .name = PN544_HCI_I2C_DRIVER_NAME,
+		   .of_match_table = of_match_ptr(of_pn544_i2c_match),
+		   .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match),
+		  },
+	.probe = pn544_hci_i2c_probe,
+	.id_table = pn544_hci_i2c_id_table,
+	.remove = pn544_hci_i2c_remove,
+};
+
+module_i2c_driver(pn544_hci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c
new file mode 100644
index 000000000..c493f2dbd
--- /dev/null
+++ b/drivers/nfc/pn544/mei.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * HCI based Driver for NXP pn544 NFC Chip
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "../mei_phy.h"
+#include "pn544.h"
+
+#define PN544_DRIVER_NAME "pn544"
+
+static int pn544_mei_probe(struct mei_cl_device *cldev,
+			       const struct mei_cl_device_id *id)
+{
+	struct nfc_mei_phy *phy;
+	int r;
+
+	phy = nfc_mei_phy_alloc(cldev);
+	if (!phy)
+		return -ENOMEM;
+
+	r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME,
+			    MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD,
+			    NULL, &phy->hdev);
+	if (r < 0) {
+		nfc_mei_phy_free(phy);
+
+		return r;
+	}
+
+	return 0;
+}
+
+static void pn544_mei_remove(struct mei_cl_device *cldev)
+{
+	struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+
+	pn544_hci_remove(phy->hdev);
+
+	nfc_mei_phy_free(phy);
+}
+
+static struct mei_cl_device_id pn544_mei_tbl[] = {
+	{ PN544_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY},
+
+	/* required last entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, pn544_mei_tbl);
+
+static struct mei_cl_driver pn544_driver = {
+	.id_table = pn544_mei_tbl,
+	.name = PN544_DRIVER_NAME,
+
+	.probe = pn544_mei_probe,
+	.remove = pn544_mei_remove,
+};
+
+module_mei_cl_driver(pn544_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c
new file mode 100644
index 000000000..32a61a185
--- /dev/null
+++ b/drivers/nfc/pn544/pn544.c
@@ -0,0 +1,984 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HCI based Driver for NXP PN544 NFC Chip
+ *
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+
+#include "pn544.h"
+
+/* Timing restrictions (ms) */
+#define PN544_HCI_RESETVEN_TIME		30
+
+enum pn544_state {
+	PN544_ST_COLD,
+	PN544_ST_FW_READY,
+	PN544_ST_READY,
+};
+
+#define FULL_VERSION_LEN 11
+
+/* Proprietary commands */
+#define PN544_WRITE		0x3f
+#define PN544_TEST_SWP		0x21
+
+/* Proprietary gates, events, commands and registers */
+
+/* NFC_HCI_RF_READER_A_GATE additional registers and commands */
+#define PN544_RF_READER_A_AUTO_ACTIVATION			0x10
+#define PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION		0x12
+#define PN544_MIFARE_CMD					0x21
+
+/* Commands that apply to all RF readers */
+#define PN544_RF_READER_CMD_PRESENCE_CHECK	0x30
+#define PN544_RF_READER_CMD_ACTIVATE_NEXT	0x32
+
+/* NFC_HCI_ID_MGMT_GATE additional registers */
+#define PN544_ID_MGMT_FULL_VERSION_SW		0x10
+
+#define PN544_RF_READER_ISO15693_GATE		0x12
+
+#define PN544_RF_READER_F_GATE			0x14
+#define PN544_FELICA_ID				0x04
+#define PN544_FELICA_RAW			0x20
+
+#define PN544_RF_READER_JEWEL_GATE		0x15
+#define PN544_JEWEL_RAW_CMD			0x23
+
+#define PN544_RF_READER_NFCIP1_INITIATOR_GATE	0x30
+#define PN544_RF_READER_NFCIP1_TARGET_GATE	0x31
+
+#define PN544_SYS_MGMT_GATE			0x90
+#define PN544_SYS_MGMT_INFO_NOTIFICATION	0x02
+
+#define PN544_POLLING_LOOP_MGMT_GATE		0x94
+#define PN544_DEP_MODE				0x01
+#define PN544_DEP_ATR_REQ			0x02
+#define PN544_DEP_ATR_RES			0x03
+#define PN544_DEP_MERGE				0x0D
+#define PN544_PL_RDPHASES			0x06
+#define PN544_PL_EMULATION			0x07
+#define PN544_PL_NFCT_DEACTIVATED		0x09
+
+#define PN544_SWP_MGMT_GATE			0xA0
+#define PN544_SWP_DEFAULT_MODE			0x01
+
+#define PN544_NFC_WI_MGMT_GATE			0xA1
+#define PN544_NFC_ESE_DEFAULT_MODE		0x01
+
+#define PN544_HCI_EVT_SND_DATA			0x01
+#define PN544_HCI_EVT_ACTIVATED			0x02
+#define PN544_HCI_EVT_DEACTIVATED		0x03
+#define PN544_HCI_EVT_RCV_DATA			0x04
+#define PN544_HCI_EVT_CONTINUE_MI		0x05
+#define PN544_HCI_EVT_SWITCH_MODE		0x03
+
+#define PN544_HCI_CMD_ATTREQUEST		0x12
+#define PN544_HCI_CMD_CONTINUE_ACTIVATION	0x13
+
+static const struct nfc_hci_gate pn544_gates[] = {
+	{NFC_HCI_ADMIN_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_LINK_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_SYS_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_SWP_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_POLLING_LOOP_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_NFC_WI_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_JEWEL_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_NFCIP1_INITIATOR_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_NFCIP1_TARGET_GATE, NFC_HCI_INVALID_PIPE}
+};
+
+/* Largest headroom needed for outgoing custom commands */
+#define PN544_CMDS_HEADROOM	2
+
+struct pn544_hci_info {
+	const struct nfc_phy_ops *phy_ops;
+	void *phy_id;
+
+	struct nfc_hci_dev *hdev;
+
+	enum pn544_state state;
+
+	struct mutex info_lock;
+
+	int async_cb_type;
+	data_exchange_cb_t async_cb;
+	void *async_cb_context;
+
+	fw_download_t fw_download;
+};
+
+static int pn544_hci_open(struct nfc_hci_dev *hdev)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+	int r = 0;
+
+	mutex_lock(&info->info_lock);
+
+	if (info->state != PN544_ST_COLD) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	r = info->phy_ops->enable(info->phy_id);
+
+	if (r == 0)
+		info->state = PN544_ST_READY;
+
+out:
+	mutex_unlock(&info->info_lock);
+	return r;
+}
+
+static void pn544_hci_close(struct nfc_hci_dev *hdev)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	mutex_lock(&info->info_lock);
+
+	if (info->state == PN544_ST_COLD)
+		goto out;
+
+	info->phy_ops->disable(info->phy_id);
+
+	info->state = PN544_ST_COLD;
+
+out:
+	mutex_unlock(&info->info_lock);
+}
+
+static int pn544_hci_ready(struct nfc_hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	static struct hw_config {
+		u8 adr[2];
+		u8 value;
+	} hw_config[] = {
+		{{0x9f, 0x9a}, 0x00},
+
+		{{0x98, 0x10}, 0xbc},
+
+		{{0x9e, 0x71}, 0x00},
+
+		{{0x98, 0x09}, 0x00},
+
+		{{0x9e, 0xb4}, 0x00},
+
+		{{0x9c, 0x01}, 0x08},
+
+		{{0x9e, 0xaa}, 0x01},
+
+		{{0x9b, 0xd1}, 0x17},
+		{{0x9b, 0xd2}, 0x58},
+		{{0x9b, 0xd3}, 0x10},
+		{{0x9b, 0xd4}, 0x47},
+		{{0x9b, 0xd5}, 0x0c},
+		{{0x9b, 0xd6}, 0x37},
+		{{0x9b, 0xdd}, 0x33},
+
+		{{0x9b, 0x84}, 0x00},
+		{{0x99, 0x81}, 0x79},
+		{{0x99, 0x31}, 0x79},
+
+		{{0x98, 0x00}, 0x3f},
+
+		{{0x9f, 0x09}, 0x02},
+
+		{{0x9f, 0x0a}, 0x05},
+
+		{{0x9e, 0xd1}, 0xa1},
+		{{0x99, 0x23}, 0x01},
+
+		{{0x9e, 0x74}, 0x00},
+		{{0x9e, 0x90}, 0x00},
+		{{0x9f, 0x28}, 0x10},
+
+		{{0x9f, 0x35}, 0x04},
+
+		{{0x9f, 0x36}, 0x11},
+
+		{{0x9c, 0x31}, 0x00},
+
+		{{0x9c, 0x32}, 0x00},
+
+		{{0x9c, 0x19}, 0x0a},
+
+		{{0x9c, 0x1a}, 0x0a},
+
+		{{0x9c, 0x0c}, 0x00},
+
+		{{0x9c, 0x0d}, 0x00},
+
+		{{0x9c, 0x12}, 0x00},
+
+		{{0x9c, 0x13}, 0x00},
+
+		{{0x98, 0xa2}, 0x09},
+
+		{{0x98, 0x93}, 0x00},
+
+		{{0x98, 0x7d}, 0x08},
+		{{0x98, 0x7e}, 0x00},
+		{{0x9f, 0xc8}, 0x00},
+	};
+	struct hw_config *p = hw_config;
+	int count = ARRAY_SIZE(hw_config);
+	struct sk_buff *res_skb;
+	u8 param[4];
+	int r;
+
+	param[0] = 0;
+	while (count--) {
+		param[1] = p->adr[0];
+		param[2] = p->adr[1];
+		param[3] = p->value;
+
+		r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_WRITE,
+				     param, 4, &res_skb);
+		if (r < 0)
+			return r;
+
+		if (res_skb->len != 1) {
+			kfree_skb(res_skb);
+			return -EPROTO;
+		}
+
+		if (res_skb->data[0] != p->value) {
+			kfree_skb(res_skb);
+			return -EIO;
+		}
+
+		kfree_skb(res_skb);
+
+		p++;
+	}
+
+	param[0] = NFC_HCI_UICC_HOST_ID;
+	r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE,
+			      NFC_HCI_ADMIN_WHITELIST, param, 1);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x3d;
+	r = nfc_hci_set_param(hdev, PN544_SYS_MGMT_GATE,
+			      PN544_SYS_MGMT_INFO_NOTIFICATION, param, 1);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x0;
+	r = nfc_hci_set_param(hdev, NFC_HCI_RF_READER_A_GATE,
+			      PN544_RF_READER_A_AUTO_ACTIVATION, param, 1);
+	if (r < 0)
+		return r;
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x1;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_NFCT_DEACTIVATED, param, 1);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x0;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_RDPHASES, param, 1);
+	if (r < 0)
+		return r;
+
+	r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE,
+			      PN544_ID_MGMT_FULL_VERSION_SW, &skb);
+	if (r < 0)
+		return r;
+
+	if (skb->len != FULL_VERSION_LEN) {
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ",
+		       DUMP_PREFIX_NONE, 16, 1,
+		       skb->data, FULL_VERSION_LEN, false);
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int pn544_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int pn544_hci_start_poll(struct nfc_hci_dev *hdev,
+				u32 im_protocols, u32 tm_protocols)
+{
+	u8 phases = 0;
+	int r;
+	u8 duration[2];
+	u8 activated;
+	u8 i_mode = 0x3f; /* Enable all supported modes */
+	u8 t_mode = 0x0f;
+	u8 t_merge = 0x01; /* Enable merge by default */
+
+	pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n",
+		__func__, im_protocols, tm_protocols);
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	if (r < 0)
+		return r;
+
+	duration[0] = 0x18;
+	duration[1] = 0x6a;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_EMULATION, duration, 2);
+	if (r < 0)
+		return r;
+
+	activated = 0;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_NFCT_DEACTIVATED, &activated, 1);
+	if (r < 0)
+		return r;
+
+	if (im_protocols & (NFC_PROTO_ISO14443_MASK | NFC_PROTO_MIFARE_MASK |
+			 NFC_PROTO_JEWEL_MASK))
+		phases |= 1;		/* Type A */
+	if (im_protocols & NFC_PROTO_FELICA_MASK) {
+		phases |= (1 << 2);	/* Type F 212 */
+		phases |= (1 << 3);	/* Type F 424 */
+	}
+
+	phases |= (1 << 5);		/* NFC active */
+
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_RDPHASES, &phases, 1);
+	if (r < 0)
+		return r;
+
+	if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) {
+		hdev->gb = nfc_get_local_general_bytes(hdev->ndev,
+							&hdev->gb_len);
+		pr_debug("generate local bytes %p\n", hdev->gb);
+		if (hdev->gb == NULL || hdev->gb_len == 0) {
+			im_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+			tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+		}
+	}
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_send_event(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				NFC_HCI_EVT_END_OPERATION, NULL, 0);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				PN544_DEP_MODE, &i_mode, 1);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				PN544_DEP_ATR_REQ, hdev->gb, hdev->gb_len);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_send_event(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+		if (r < 0)
+			nfc_hci_send_event(hdev,
+					PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+					NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	}
+
+	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+				PN544_DEP_MODE, &t_mode, 1);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+				PN544_DEP_ATR_RES, hdev->gb, hdev->gb_len);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+				PN544_DEP_MERGE, &t_merge, 1);
+		if (r < 0)
+			return r;
+	}
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+	if (r < 0)
+		nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+				   NFC_HCI_EVT_END_OPERATION, NULL, 0);
+
+	return r;
+}
+
+static int pn544_hci_dep_link_up(struct nfc_hci_dev *hdev,
+				struct nfc_target *target, u8 comm_mode,
+				u8 *gb, size_t gb_len)
+{
+	struct sk_buff *rgb_skb = NULL;
+	int r;
+
+	r = nfc_hci_get_param(hdev, target->hci_reader_gate,
+				PN544_DEP_ATR_RES, &rgb_skb);
+	if (r < 0)
+		return r;
+
+	if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+	print_hex_dump(KERN_DEBUG, "remote gb: ", DUMP_PREFIX_OFFSET,
+			16, 1, rgb_skb->data, rgb_skb->len, true);
+
+	r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data,
+						rgb_skb->len);
+
+	if (r == 0)
+		r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode,
+					NFC_RF_INITIATOR);
+exit:
+	kfree_skb(rgb_skb);
+	return r;
+}
+
+static int pn544_hci_dep_link_down(struct nfc_hci_dev *hdev)
+{
+
+	return nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+					NFC_HCI_EVT_END_OPERATION, NULL, 0);
+}
+
+static int pn544_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+				      struct nfc_target *target)
+{
+	switch (gate) {
+	case PN544_RF_READER_F_GATE:
+		target->supported_protocols = NFC_PROTO_FELICA_MASK;
+		break;
+	case PN544_RF_READER_JEWEL_GATE:
+		target->supported_protocols = NFC_PROTO_JEWEL_MASK;
+		target->sens_res = 0x0c00;
+		break;
+	case PN544_RF_READER_NFCIP1_INITIATOR_GATE:
+		target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		break;
+	default:
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int pn544_hci_complete_target_discovered(struct nfc_hci_dev *hdev,
+						u8 gate,
+						struct nfc_target *target)
+{
+	struct sk_buff *uid_skb;
+	int r = 0;
+
+	if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE)
+		return r;
+
+	if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_send_cmd(hdev,
+			PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+			PN544_HCI_CMD_CONTINUE_ACTIVATION, NULL, 0, NULL);
+		if (r < 0)
+			return r;
+
+		target->hci_reader_gate = PN544_RF_READER_NFCIP1_INITIATOR_GATE;
+	} else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+		if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
+		    target->nfcid1_len != 10)
+			return -EPROTO;
+
+		r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+				     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+				     target->nfcid1, target->nfcid1_len, NULL);
+	} else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) {
+		r = nfc_hci_get_param(hdev, PN544_RF_READER_F_GATE,
+				      PN544_FELICA_ID, &uid_skb);
+		if (r < 0)
+			return r;
+
+		if (uid_skb->len != 8) {
+			kfree_skb(uid_skb);
+			return -EPROTO;
+		}
+
+		/* Type F NFC-DEP IDm has prefix 0x01FE */
+		if ((uid_skb->data[0] == 0x01) && (uid_skb->data[1] == 0xfe)) {
+			kfree_skb(uid_skb);
+			r = nfc_hci_send_cmd(hdev,
+					PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+					PN544_HCI_CMD_CONTINUE_ACTIVATION,
+					NULL, 0, NULL);
+			if (r < 0)
+				return r;
+
+			target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+			target->hci_reader_gate =
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE;
+		} else {
+			r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
+					     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+					     uid_skb->data, uid_skb->len, NULL);
+			kfree_skb(uid_skb);
+		}
+	} else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) {
+		/*
+		 * TODO: maybe other ISO 14443 require some kind of continue
+		 * activation, but for now we've seen only this one below.
+		 */
+		if (target->sens_res == 0x4403)	/* Type 4 Mifare DESFire */
+			r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+			      PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION,
+			      NULL, 0, NULL);
+	}
+
+	return r;
+}
+
+#define PN544_CB_TYPE_READER_F 1
+
+static void pn544_hci_data_exchange_cb(void *context, struct sk_buff *skb,
+				       int err)
+{
+	struct pn544_hci_info *info = context;
+
+	switch (info->async_cb_type) {
+	case PN544_CB_TYPE_READER_F:
+		if (err == 0)
+			skb_pull(skb, 1);
+		info->async_cb(info->async_cb_context, skb, err);
+		break;
+	default:
+		if (err == 0)
+			kfree_skb(skb);
+		break;
+	}
+}
+
+#define MIFARE_CMD_AUTH_KEY_A	0x60
+#define MIFARE_CMD_AUTH_KEY_B	0x61
+#define MIFARE_CMD_HEADER	2
+#define MIFARE_UID_LEN		4
+#define MIFARE_KEY_LEN		6
+#define MIFARE_CMD_LEN		12
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ *    1: driver doesn't especially handle, please do standard processing
+ */
+static int pn544_hci_im_transceive(struct nfc_hci_dev *hdev,
+				   struct nfc_target *target,
+				   struct sk_buff *skb, data_exchange_cb_t cb,
+				   void *cb_context)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_info(DRIVER_DESC ": %s for gate=%d\n", __func__,
+		target->hci_reader_gate);
+
+	switch (target->hci_reader_gate) {
+	case NFC_HCI_RF_READER_A_GATE:
+		if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+			/*
+			 * It seems that pn544 is inverting key and UID for
+			 * MIFARE authentication commands.
+			 */
+			if (skb->len == MIFARE_CMD_LEN &&
+			    (skb->data[0] == MIFARE_CMD_AUTH_KEY_A ||
+			     skb->data[0] == MIFARE_CMD_AUTH_KEY_B)) {
+				u8 uid[MIFARE_UID_LEN];
+				u8 *data = skb->data + MIFARE_CMD_HEADER;
+
+				memcpy(uid, data + MIFARE_KEY_LEN,
+				       MIFARE_UID_LEN);
+				memmove(data + MIFARE_UID_LEN, data,
+					MIFARE_KEY_LEN);
+				memcpy(data, uid, MIFARE_UID_LEN);
+			}
+
+			return nfc_hci_send_cmd_async(hdev,
+						      target->hci_reader_gate,
+						      PN544_MIFARE_CMD,
+						      skb->data, skb->len,
+						      cb, cb_context);
+		} else
+			return 1;
+	case PN544_RF_READER_F_GATE:
+		*(u8 *)skb_push(skb, 1) = 0;
+		*(u8 *)skb_push(skb, 1) = 0;
+
+		info->async_cb_type = PN544_CB_TYPE_READER_F;
+		info->async_cb = cb;
+		info->async_cb_context = cb_context;
+
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      PN544_FELICA_RAW, skb->data,
+					      skb->len,
+					      pn544_hci_data_exchange_cb, info);
+	case PN544_RF_READER_JEWEL_GATE:
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      PN544_JEWEL_RAW_CMD, skb->data,
+					      skb->len, cb, cb_context);
+	case PN544_RF_READER_NFCIP1_INITIATOR_GATE:
+		*(u8 *)skb_push(skb, 1) = 0;
+
+		return nfc_hci_send_event(hdev, target->hci_reader_gate,
+					PN544_HCI_EVT_SND_DATA, skb->data,
+					skb->len);
+	default:
+		return 1;
+	}
+}
+
+static int pn544_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	int r;
+
+	/* Set default false for multiple information chaining */
+	*(u8 *)skb_push(skb, 1) = 0;
+
+	r = nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+			       PN544_HCI_EVT_SND_DATA, skb->data, skb->len);
+
+	kfree_skb(skb);
+
+	return r;
+}
+
+static int pn544_hci_check_presence(struct nfc_hci_dev *hdev,
+				   struct nfc_target *target)
+{
+	pr_debug("supported protocol %d\n", target->supported_protocols);
+	if (target->supported_protocols & (NFC_PROTO_ISO14443_MASK |
+					NFC_PROTO_ISO14443_B_MASK)) {
+		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+					PN544_RF_READER_CMD_PRESENCE_CHECK,
+					NULL, 0, NULL);
+	} else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+		if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
+		    target->nfcid1_len != 10)
+			return -EOPNOTSUPP;
+
+		return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+				     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+				     target->nfcid1, target->nfcid1_len, NULL);
+	} else if (target->supported_protocols & (NFC_PROTO_JEWEL_MASK |
+						NFC_PROTO_FELICA_MASK)) {
+		return -EOPNOTSUPP;
+	} else if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+					PN544_HCI_CMD_ATTREQUEST,
+					NULL, 0, NULL);
+	}
+
+	return 0;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event,
+				    struct sk_buff *skb)
+{
+	struct sk_buff *rgb_skb = NULL;
+	u8 gate = hdev->pipes[pipe].gate;
+	int r;
+
+	pr_debug("hci event %d\n", event);
+	switch (event) {
+	case PN544_HCI_EVT_ACTIVATED:
+		if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) {
+			r = nfc_hci_target_discovered(hdev, gate);
+		} else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) {
+			r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ,
+					      &rgb_skb);
+			if (r < 0)
+				goto exit;
+
+			r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK,
+					     NFC_COMM_PASSIVE, rgb_skb->data,
+					     rgb_skb->len);
+
+			kfree_skb(rgb_skb);
+		} else {
+			r = -EINVAL;
+		}
+		break;
+	case PN544_HCI_EVT_DEACTIVATED:
+		r = nfc_hci_send_event(hdev, gate, NFC_HCI_EVT_END_OPERATION,
+				       NULL, 0);
+		break;
+	case PN544_HCI_EVT_RCV_DATA:
+		if (skb->len < 2) {
+			r = -EPROTO;
+			goto exit;
+		}
+
+		if (skb->data[0] != 0) {
+			pr_debug("data0 %d\n", skb->data[0]);
+			r = -EPROTO;
+			goto exit;
+		}
+
+		skb_pull(skb, 2);
+		return nfc_tm_data_received(hdev->ndev, skb);
+	default:
+		return 1;
+	}
+
+exit:
+	kfree_skb(skb);
+
+	return r;
+}
+
+static int pn544_hci_fw_download(struct nfc_hci_dev *hdev,
+				 const char *firmware_name)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	if (info->fw_download == NULL)
+		return -ENOTSUPP;
+
+	return info->fw_download(info->phy_id, firmware_name, hdev->sw_romlib);
+}
+
+static int pn544_hci_discover_se(struct nfc_hci_dev *hdev)
+{
+	u32 se_idx = 0;
+	u8 ese_mode = 0x01; /* Default mode */
+	struct sk_buff *res_skb;
+	int r;
+
+	r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_TEST_SWP,
+			     NULL, 0, &res_skb);
+
+	if (r == 0) {
+		if (res_skb->len == 2 && res_skb->data[0] == 0x00)
+			nfc_add_se(hdev->ndev, se_idx++, NFC_SE_UICC);
+
+		kfree_skb(res_skb);
+	}
+
+	r = nfc_hci_send_event(hdev, PN544_NFC_WI_MGMT_GATE,
+				PN544_HCI_EVT_SWITCH_MODE,
+				&ese_mode, 1);
+	if (r == 0)
+		nfc_add_se(hdev->ndev, se_idx++, NFC_SE_EMBEDDED);
+
+	return !se_idx;
+}
+
+#define PN544_SE_MODE_OFF	0x00
+#define PN544_SE_MODE_ON	0x01
+static int pn544_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx)
+{
+	const struct nfc_se *se;
+	u8 enable = PN544_SE_MODE_ON;
+	static struct uicc_gatelist {
+		u8 head;
+		u8 adr[2];
+		u8 value;
+	} uicc_gatelist[] = {
+		{0x00, {0x9e, 0xd9}, 0x23},
+		{0x00, {0x9e, 0xda}, 0x21},
+		{0x00, {0x9e, 0xdb}, 0x22},
+		{0x00, {0x9e, 0xdc}, 0x24},
+	};
+	struct uicc_gatelist *p = uicc_gatelist;
+	int count = ARRAY_SIZE(uicc_gatelist);
+	struct sk_buff *res_skb;
+	int r;
+
+	se = nfc_find_se(hdev->ndev, se_idx);
+
+	switch (se->type) {
+	case NFC_SE_UICC:
+		while (count--) {
+			r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE,
+					PN544_WRITE, (u8 *)p, 4, &res_skb);
+			if (r < 0)
+				return r;
+
+			if (res_skb->len != 1) {
+				kfree_skb(res_skb);
+				return -EPROTO;
+			}
+
+			if (res_skb->data[0] != p->value) {
+				kfree_skb(res_skb);
+				return -EIO;
+			}
+
+			kfree_skb(res_skb);
+
+			p++;
+		}
+
+		return nfc_hci_set_param(hdev, PN544_SWP_MGMT_GATE,
+			      PN544_SWP_DEFAULT_MODE, &enable, 1);
+	case NFC_SE_EMBEDDED:
+		return nfc_hci_set_param(hdev, PN544_NFC_WI_MGMT_GATE,
+			      PN544_NFC_ESE_DEFAULT_MODE, &enable, 1);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int pn544_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx)
+{
+	const struct nfc_se *se;
+	u8 disable = PN544_SE_MODE_OFF;
+
+	se = nfc_find_se(hdev->ndev, se_idx);
+
+	switch (se->type) {
+	case NFC_SE_UICC:
+		return nfc_hci_set_param(hdev, PN544_SWP_MGMT_GATE,
+			      PN544_SWP_DEFAULT_MODE, &disable, 1);
+	case NFC_SE_EMBEDDED:
+		return nfc_hci_set_param(hdev, PN544_NFC_WI_MGMT_GATE,
+			      PN544_NFC_ESE_DEFAULT_MODE, &disable, 1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct nfc_hci_ops pn544_hci_ops = {
+	.open = pn544_hci_open,
+	.close = pn544_hci_close,
+	.hci_ready = pn544_hci_ready,
+	.xmit = pn544_hci_xmit,
+	.start_poll = pn544_hci_start_poll,
+	.dep_link_up = pn544_hci_dep_link_up,
+	.dep_link_down = pn544_hci_dep_link_down,
+	.target_from_gate = pn544_hci_target_from_gate,
+	.complete_target_discovered = pn544_hci_complete_target_discovered,
+	.im_transceive = pn544_hci_im_transceive,
+	.tm_send = pn544_hci_tm_send,
+	.check_presence = pn544_hci_check_presence,
+	.event_received = pn544_hci_event_received,
+	.fw_download = pn544_hci_fw_download,
+	.discover_se = pn544_hci_discover_se,
+	.enable_se = pn544_hci_enable_se,
+	.disable_se = pn544_hci_disable_se,
+};
+
+int pn544_hci_probe(void *phy_id, const struct nfc_phy_ops *phy_ops,
+		    char *llc_name, int phy_headroom, int phy_tailroom,
+		    int phy_payload, fw_download_t fw_download,
+		    struct nfc_hci_dev **hdev)
+{
+	struct pn544_hci_info *info;
+	u32 protocols;
+	struct nfc_hci_init_data init_data;
+	int r;
+
+	info = kzalloc(sizeof(struct pn544_hci_info), GFP_KERNEL);
+	if (!info) {
+		r = -ENOMEM;
+		goto err_info_alloc;
+	}
+
+	info->phy_ops = phy_ops;
+	info->phy_id = phy_id;
+	info->fw_download = fw_download;
+	info->state = PN544_ST_COLD;
+	mutex_init(&info->info_lock);
+
+	init_data.gate_count = ARRAY_SIZE(pn544_gates);
+
+	memcpy(init_data.gates, pn544_gates, sizeof(pn544_gates));
+
+	/*
+	 * TODO: Session id must include the driver name + some bus addr
+	 * persistent info to discriminate 2 identical chips
+	 */
+	strcpy(init_data.session_id, "ID544HCI");
+
+	protocols = NFC_PROTO_JEWEL_MASK |
+		    NFC_PROTO_MIFARE_MASK |
+		    NFC_PROTO_FELICA_MASK |
+		    NFC_PROTO_ISO14443_MASK |
+		    NFC_PROTO_ISO14443_B_MASK |
+		    NFC_PROTO_NFC_DEP_MASK;
+
+	info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0,
+					     protocols, llc_name,
+					     phy_headroom + PN544_CMDS_HEADROOM,
+					     phy_tailroom, phy_payload);
+	if (!info->hdev) {
+		pr_err("Cannot allocate nfc hdev\n");
+		r = -ENOMEM;
+		goto err_alloc_hdev;
+	}
+
+	nfc_hci_set_clientdata(info->hdev, info);
+
+	r = nfc_hci_register_device(info->hdev);
+	if (r)
+		goto err_regdev;
+
+	*hdev = info->hdev;
+
+	return 0;
+
+err_regdev:
+	nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+	kfree(info);
+
+err_info_alloc:
+	return r;
+}
+EXPORT_SYMBOL(pn544_hci_probe);
+
+void pn544_hci_remove(struct nfc_hci_dev *hdev)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	nfc_hci_unregister_device(hdev);
+	nfc_hci_free_device(hdev);
+	kfree(info);
+}
+EXPORT_SYMBOL(pn544_hci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/pn544.h b/drivers/nfc/pn544/pn544.h
new file mode 100644
index 000000000..c6fe3e11e
--- /dev/null
+++ b/drivers/nfc/pn544/pn544.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2011 - 2012  Intel Corporation. All rights reserved.
+ */
+
+#ifndef __LOCAL_PN544_H_
+#define __LOCAL_PN544_H_
+
+#include <net/nfc/hci.h>
+
+#define DRIVER_DESC "HCI NFC driver for PN544"
+
+#define PN544_HCI_MODE 0
+#define PN544_FW_MODE 1
+
+typedef int (*fw_download_t)(void *context, const char *firmware_name,
+				u8 hw_variant);
+
+int pn544_hci_probe(void *phy_id, const struct nfc_phy_ops *phy_ops,
+		    char *llc_name, int phy_headroom, int phy_tailroom,
+		    int phy_payload, fw_download_t fw_download,
+		    struct nfc_hci_dev **hdev);
+void pn544_hci_remove(struct nfc_hci_dev *hdev);
+
+#endif /* __LOCAL_PN544_H_ */