Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 470 insertions, 0 deletions

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
new file mode 100644
index 000000000..c1e893c8a
--- /dev/null
+++ b/drivers/nvmem/qfprom.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+/* Blow timer clock frequency in Mhz */
+#define QFPROM_BLOW_TIMER_OFFSET 0x03c
+
+/* Amount of time required to hold charge to blow fuse in micro-seconds */
+#define QFPROM_FUSE_BLOW_POLL_US	100
+#define QFPROM_FUSE_BLOW_TIMEOUT_US	10000
+
+#define QFPROM_BLOW_STATUS_OFFSET	0x048
+#define QFPROM_BLOW_STATUS_BUSY		0x1
+#define QFPROM_BLOW_STATUS_READY	0x0
+
+#define QFPROM_ACCEL_OFFSET		0x044
+
+#define QFPROM_VERSION_OFFSET		0x0
+#define QFPROM_MAJOR_VERSION_SHIFT	28
+#define QFPROM_MAJOR_VERSION_MASK	GENMASK(31, QFPROM_MAJOR_VERSION_SHIFT)
+#define QFPROM_MINOR_VERSION_SHIFT	16
+#define QFPROM_MINOR_VERSION_MASK	GENMASK(27, QFPROM_MINOR_VERSION_SHIFT)
+
+static bool read_raw_data;
+module_param(read_raw_data, bool, 0644);
+MODULE_PARM_DESC(read_raw_data, "Read raw instead of corrected data");
+
+/**
+ * struct qfprom_soc_data - config that varies from SoC to SoC.
+ *
+ * @accel_value:             Should contain qfprom accel value.
+ * @qfprom_blow_timer_value: The timer value of qfprom when doing efuse blow.
+ * @qfprom_blow_set_freq:    The frequency required to set when we start the
+ *                           fuse blowing.
+ * @qfprom_blow_uV:          LDO voltage to be set when doing efuse blow
+ */
+struct qfprom_soc_data {
+	u32 accel_value;
+	u32 qfprom_blow_timer_value;
+	u32 qfprom_blow_set_freq;
+	int qfprom_blow_uV;
+};
+
+/**
+ * struct qfprom_priv - structure holding qfprom attributes
+ *
+ * @qfpraw:       iomapped memory space for qfprom-efuse raw address space.
+ * @qfpconf:      iomapped memory space for qfprom-efuse configuration address
+ *                space.
+ * @qfpcorrected: iomapped memory space for qfprom corrected address space.
+ * @qfpsecurity:  iomapped memory space for qfprom security control space.
+ * @dev:          qfprom device structure.
+ * @secclk:       Clock supply.
+ * @vcc:          Regulator supply.
+ * @soc_data:     Data that for things that varies from SoC to SoC.
+ */
+struct qfprom_priv {
+	void __iomem *qfpraw;
+	void __iomem *qfpconf;
+	void __iomem *qfpcorrected;
+	void __iomem *qfpsecurity;
+	struct device *dev;
+	struct clk *secclk;
+	struct regulator *vcc;
+	const struct qfprom_soc_data *soc_data;
+};
+
+/**
+ * struct qfprom_touched_values - saved values to restore after blowing
+ *
+ * @clk_rate: The rate the clock was at before blowing.
+ * @accel_val: The value of the accel reg before blowing.
+ * @timer_val: The value of the timer before blowing.
+ */
+struct qfprom_touched_values {
+	unsigned long clk_rate;
+	u32 accel_val;
+	u32 timer_val;
+};
+
+/**
+ * struct qfprom_soc_compatible_data - Data matched against the SoC
+ * compatible string.
+ *
+ * @keepout: Array of keepout regions for this SoC.
+ * @nkeepout: Number of elements in the keepout array.
+ */
+struct qfprom_soc_compatible_data {
+	const struct nvmem_keepout *keepout;
+	unsigned int nkeepout;
+};
+
+static const struct nvmem_keepout sc7180_qfprom_keepout[] = {
+	{.start = 0x128, .end = 0x148},
+	{.start = 0x220, .end = 0x228}
+};
+
+static const struct qfprom_soc_compatible_data sc7180_qfprom = {
+	.keepout = sc7180_qfprom_keepout,
+	.nkeepout = ARRAY_SIZE(sc7180_qfprom_keepout)
+};
+
+static const struct nvmem_keepout sc7280_qfprom_keepout[] = {
+	{.start = 0x128, .end = 0x148},
+	{.start = 0x238, .end = 0x248}
+};
+
+static const struct qfprom_soc_compatible_data sc7280_qfprom = {
+	.keepout = sc7280_qfprom_keepout,
+	.nkeepout = ARRAY_SIZE(sc7280_qfprom_keepout)
+};
+
+/**
+ * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
+ * @priv: Our driver data.
+ * @old:  The data that was stashed from before fuse blowing.
+ *
+ * Resets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors but doesn't return an error code
+ * since there's not much we can do upon failure.
+ */
+static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
+					const struct qfprom_touched_values *old)
+{
+	int ret;
+
+	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+	dev_pm_genpd_set_performance_state(priv->dev, 0);
+	pm_runtime_put(priv->dev);
+
+	/*
+	 * This may be a shared rail and may be able to run at a lower rate
+	 * when we're not blowing fuses.  At the moment, the regulator framework
+	 * applies voltage constraints even on disabled rails, so remove our
+	 * constraints and allow the rail to be adjusted by other users.
+	 */
+	ret = regulator_set_voltage(priv->vcc, 0, INT_MAX);
+	if (ret)
+		dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
+
+	ret = regulator_disable(priv->vcc);
+	if (ret)
+		dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
+
+	ret = clk_set_rate(priv->secclk, old->clk_rate);
+	if (ret)
+		dev_warn(priv->dev,
+			 "Failed to set clock rate for disable (ignoring)\n");
+
+	clk_disable_unprepare(priv->secclk);
+}
+
+/**
+ * qfprom_enable_fuse_blowing() - Enable fuse blowing.
+ * @priv: Our driver data.
+ * @old:  We'll stash stuff here to use when disabling.
+ *
+ * Sets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors so caller doesn't need to.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
+				      struct qfprom_touched_values *old)
+{
+	int ret;
+	int qfprom_blow_uV = priv->soc_data->qfprom_blow_uV;
+
+	ret = clk_prepare_enable(priv->secclk);
+	if (ret) {
+		dev_err(priv->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	old->clk_rate = clk_get_rate(priv->secclk);
+	ret = clk_set_rate(priv->secclk, priv->soc_data->qfprom_blow_set_freq);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set clock rate for enable\n");
+		goto err_clk_prepared;
+	}
+
+	/*
+	 * Hardware requires a minimum voltage for fuse blowing.
+	 * This may be a shared rail so don't specify a maximum.
+	 * Regulator constraints will cap to the actual maximum.
+	 */
+	ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set %duV\n", qfprom_blow_uV);
+		goto err_clk_rate_set;
+	}
+
+	ret = regulator_enable(priv->vcc);
+	if (ret) {
+		dev_err(priv->dev, "Failed to enable regulator\n");
+		goto err_clk_rate_set;
+	}
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret < 0) {
+		dev_err(priv->dev, "Failed to enable power-domain\n");
+		goto err_reg_enable;
+	}
+	dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+
+	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
+	writel(priv->soc_data->qfprom_blow_timer_value,
+	       priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(priv->soc_data->accel_value,
+	       priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+	return 0;
+
+err_reg_enable:
+	regulator_disable(priv->vcc);
+err_clk_rate_set:
+	clk_set_rate(priv->secclk, old->clk_rate);
+err_clk_prepared:
+	clk_disable_unprepare(priv->secclk);
+	return ret;
+}
+
+/**
+ * qfprom_reg_write() - Write to fuses.
+ * @context: Our driver data.
+ * @reg:     The offset to write at.
+ * @_val:    Pointer to data to write.
+ * @bytes:   The number of bytes to write.
+ *
+ * Writes to fuses.  WARNING: THIS IS PERMANENT.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_reg_write(void *context, unsigned int reg, void *_val,
+			    size_t bytes)
+{
+	struct qfprom_priv *priv = context;
+	struct qfprom_touched_values old;
+	int words = bytes / 4;
+	u32 *value = _val;
+	u32 blow_status;
+	int ret;
+	int i;
+
+	dev_dbg(priv->dev,
+		"Writing to raw qfprom region : %#010x of size: %zu\n",
+		reg, bytes);
+
+	/*
+	 * The hardware only allows us to write word at a time, but we can
+	 * read byte at a time.  Until the nvmem framework allows a separate
+	 * word_size and stride for reading vs. writing, we'll enforce here.
+	 */
+	if (bytes % 4) {
+		dev_err(priv->dev,
+			"%zu is not an integral number of words\n", bytes);
+		return -EINVAL;
+	}
+	if (reg % 4) {
+		dev_err(priv->dev,
+			"Invalid offset: %#x.  Must be word aligned\n", reg);
+		return -EINVAL;
+	}
+
+	ret = qfprom_enable_fuse_blowing(priv, &old);
+	if (ret)
+		return ret;
+
+	ret = readl_relaxed_poll_timeout(
+		priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+		blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+		QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+	if (ret) {
+		dev_err(priv->dev,
+			"Timeout waiting for initial ready; aborting.\n");
+		goto exit_enabled_fuse_blowing;
+	}
+
+	for (i = 0; i < words; i++)
+		writel(value[i], priv->qfpraw + reg + (i * 4));
+
+	ret = readl_relaxed_poll_timeout(
+		priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+		blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+		QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+	/* Give an error, but not much we can do in this case */
+	if (ret)
+		dev_err(priv->dev, "Timeout waiting for finish.\n");
+
+exit_enabled_fuse_blowing:
+	qfprom_disable_fuse_blowing(priv, &old);
+
+	return ret;
+}
+
+static int qfprom_reg_read(void *context,
+			unsigned int reg, void *_val, size_t bytes)
+{
+	struct qfprom_priv *priv = context;
+	u8 *val = _val;
+	int i = 0, words = bytes;
+	void __iomem *base = priv->qfpcorrected;
+
+	if (read_raw_data && priv->qfpraw)
+		base = priv->qfpraw;
+
+	while (words--)
+		*val++ = readb(base + reg + i++);
+
+	return 0;
+}
+
+static void qfprom_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
+static const struct qfprom_soc_data qfprom_7_8_data = {
+	.accel_value = 0xD10,
+	.qfprom_blow_timer_value = 25,
+	.qfprom_blow_set_freq = 4800000,
+	.qfprom_blow_uV = 1800000,
+};
+
+static const struct qfprom_soc_data qfprom_7_15_data = {
+	.accel_value = 0xD08,
+	.qfprom_blow_timer_value = 24,
+	.qfprom_blow_set_freq = 4800000,
+	.qfprom_blow_uV = 1900000,
+};
+
+static int qfprom_probe(struct platform_device *pdev)
+{
+	struct nvmem_config econfig = {
+		.name = "qfprom",
+		.stride = 1,
+		.word_size = 1,
+		.id = NVMEM_DEVID_AUTO,
+		.reg_read = qfprom_reg_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	const struct qfprom_soc_compatible_data *soc_data;
+	struct qfprom_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* The corrected section is always provided */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->qfpcorrected = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->qfpcorrected))
+		return PTR_ERR(priv->qfpcorrected);
+
+	econfig.size = resource_size(res);
+	econfig.dev = dev;
+	econfig.priv = priv;
+
+	priv->dev = dev;
+	soc_data = device_get_match_data(dev);
+	if (soc_data) {
+		econfig.keepout = soc_data->keepout;
+		econfig.nkeepout = soc_data->nkeepout;
+	}
+
+	/*
+	 * If more than one region is provided then the OS has the ability
+	 * to write.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		u32 version;
+		int major_version, minor_version;
+
+		priv->qfpraw = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpraw))
+			return PTR_ERR(priv->qfpraw);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+		priv->qfpconf = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpconf))
+			return PTR_ERR(priv->qfpconf);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+		priv->qfpsecurity = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpsecurity))
+			return PTR_ERR(priv->qfpsecurity);
+
+		version = readl(priv->qfpsecurity + QFPROM_VERSION_OFFSET);
+		major_version = (version & QFPROM_MAJOR_VERSION_MASK) >>
+				QFPROM_MAJOR_VERSION_SHIFT;
+		minor_version = (version & QFPROM_MINOR_VERSION_MASK) >>
+				QFPROM_MINOR_VERSION_SHIFT;
+
+		if (major_version == 7 && minor_version == 8)
+			priv->soc_data = &qfprom_7_8_data;
+		else if (major_version == 7 && minor_version == 15)
+			priv->soc_data = &qfprom_7_15_data;
+
+		priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+		if (IS_ERR(priv->vcc))
+			return PTR_ERR(priv->vcc);
+
+		priv->secclk = devm_clk_get(dev, "core");
+		if (IS_ERR(priv->secclk)) {
+			ret = PTR_ERR(priv->secclk);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Error getting clock: %d\n", ret);
+			return ret;
+		}
+
+		/* Only enable writing if we have SoC data. */
+		if (priv->soc_data)
+			econfig.reg_write = qfprom_reg_write;
+	}
+
+	pm_runtime_enable(dev);
+	ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
+	if (ret)
+		return ret;
+
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id qfprom_of_match[] = {
+	{ .compatible = "qcom,qfprom",},
+	{ .compatible = "qcom,sc7180-qfprom", .data = &sc7180_qfprom},
+	{ .compatible = "qcom,sc7280-qfprom", .data = &sc7280_qfprom},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, qfprom_of_match);
+
+static struct platform_driver qfprom_driver = {
+	.probe = qfprom_probe,
+	.driver = {
+		.name = "qcom,qfprom",
+		.of_match_table = qfprom_of_match,
+	},
+};
+module_platform_driver(qfprom_driver);
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm QFPROM driver");
+MODULE_LICENSE("GPL v2");