Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 6396 insertions, 0 deletions

diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
new file mode 100644
index 000000000..788ac8df3
--- /dev/null
+++ b/drivers/pci/pcie/Kconfig
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# PCI Express Port Bus Configuration
+#
+config PCIEPORTBUS
+	bool "PCI Express Port Bus support"
+	help
+	  This enables PCI Express Port Bus support. Users can then enable
+	  support for Native Hot-Plug, Advanced Error Reporting, Power
+	  Management Events, and Downstream Port Containment.
+
+#
+# Include service Kconfig here
+#
+config HOTPLUG_PCI_PCIE
+	bool "PCI Express Hotplug driver"
+	depends on HOTPLUG_PCI && PCIEPORTBUS
+	help
+	  Say Y here if you have a motherboard that supports PCI Express Native
+	  Hotplug
+
+	  When in doubt, say N.
+
+config PCIEAER
+	bool "PCI Express Advanced Error Reporting support"
+	depends on PCIEPORTBUS
+	select RAS
+	help
+	  This enables PCI Express Root Port Advanced Error Reporting
+	  (AER) driver support. Error reporting messages sent to Root
+	  Port will be handled by PCI Express AER driver.
+
+config PCIEAER_INJECT
+	tristate "PCI Express error injection support"
+	depends on PCIEAER
+	select GENERIC_IRQ_INJECTION
+	help
+	  This enables PCI Express Root Port Advanced Error Reporting
+	  (AER) software error injector.
+
+	  Debugging AER code is quite difficult because it is hard
+	  to trigger various real hardware errors. Software-based
+	  error injection can fake almost all kinds of errors with the
+	  help of a user space helper tool aer-inject, which can be
+	  gotten from:
+	     https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
+
+#
+# PCI Express ECRC
+#
+config PCIE_ECRC
+	bool "PCI Express ECRC settings control"
+	depends on PCIEAER
+	help
+	  Used to override firmware/bios settings for PCI Express ECRC
+	  (transaction layer end-to-end CRC checking).
+
+	  When in doubt, say N.
+
+#
+# PCI Express ASPM
+#
+config PCIEASPM
+	bool "PCI Express ASPM control" if EXPERT
+	default y
+	help
+	  This enables OS control over PCI Express ASPM (Active State
+	  Power Management) and Clock Power Management. ASPM supports
+	  state L0/L0s/L1.
+
+	  ASPM is initially set up by the firmware. With this option enabled,
+	  Linux can modify this state in order to disable ASPM on known-bad
+	  hardware or configurations and enable it when known-safe.
+
+	  ASPM can be disabled or enabled at runtime via
+	  /sys/module/pcie_aspm/parameters/policy
+
+	  When in doubt, say Y.
+
+choice
+	prompt "Default ASPM policy"
+	default PCIEASPM_DEFAULT
+	depends on PCIEASPM
+
+config PCIEASPM_DEFAULT
+	bool "BIOS default"
+	depends on PCIEASPM
+	help
+	  Use the BIOS defaults for PCI Express ASPM.
+
+config PCIEASPM_POWERSAVE
+	bool "Powersave"
+	depends on PCIEASPM
+	help
+	  Enable PCI Express ASPM L0s and L1 where possible, even if the
+	  BIOS did not.
+
+config PCIEASPM_POWER_SUPERSAVE
+	bool "Power Supersave"
+	depends on PCIEASPM
+	help
+	  Same as PCIEASPM_POWERSAVE, except it also enables L1 substates where
+	  possible. This would result in higher power savings while staying in L1
+	  where the components support it.
+
+config PCIEASPM_PERFORMANCE
+	bool "Performance"
+	depends on PCIEASPM
+	help
+	  Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them.
+endchoice
+
+config PCIE_PME
+	def_bool y
+	depends on PCIEPORTBUS && PM
+
+config PCIE_DPC
+	bool "PCI Express Downstream Port Containment support"
+	depends on PCIEPORTBUS && PCIEAER
+	help
+	  This enables PCI Express Downstream Port Containment (DPC)
+	  driver support.  DPC events from Root and Downstream ports
+	  will be handled by the DPC driver.  If your system doesn't
+	  have this capability or you do not want to use this feature,
+	  it is safe to answer N.
+
+config PCIE_PTM
+	bool "PCI Express Precision Time Measurement support"
+	help
+	  This enables PCI Express Precision Time Measurement (PTM)
+	  support.
+
+	  This is only useful if you have devices that support PTM, but it
+	  is safe to enable even if you don't.
+
+config PCIE_EDR
+	bool "PCI Express Error Disconnect Recover support"
+	depends on PCIE_DPC && ACPI
+	help
+	  This option adds Error Disconnect Recover support as specified
+	  in the Downstream Port Containment Related Enhancements ECN to
+	  the PCI Firmware Specification r3.2.  Enable this if you want to
+	  support hybrid DPC model which uses both firmware and OS to
+	  implement DPC.
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
new file mode 100644
index 000000000..5783a2f79
--- /dev/null
+++ b/drivers/pci/pcie/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for PCI Express features and port driver
+
+pcieportdrv-y			:= portdrv_core.o portdrv_pci.o rcec.o
+
+obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
+
+obj-$(CONFIG_PCIEASPM)		+= aspm.o
+obj-$(CONFIG_PCIEAER)		+= aer.o err.o
+obj-$(CONFIG_PCIEAER_INJECT)	+= aer_inject.o
+obj-$(CONFIG_PCIE_PME)		+= pme.o
+obj-$(CONFIG_PCIE_DPC)		+= dpc.o
+obj-$(CONFIG_PCIE_PTM)		+= ptm.o
+obj-$(CONFIG_PCIE_EDR)		+= edr.o
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
new file mode 100644
index 000000000..e2d8a74f8
--- /dev/null
+++ b/drivers/pci/pcie/aer.c
@@ -0,0 +1,1466 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Implement the AER root port service driver. The driver registers an IRQ
+ * handler. When a root port triggers an AER interrupt, the IRQ handler
+ * collects root port status and schedules work.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ *	Tom Long Nguyen (tom.l.nguyen@intel.com)
+ *	Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ * (C) Copyright 2009 Hewlett-Packard Development Company, L.P.
+ *    Andrew Patterson <andrew.patterson@hp.com>
+ */
+
+#define pr_fmt(fmt) "AER: " fmt
+#define dev_fmt pr_fmt
+
+#include <linux/bitops.h>
+#include <linux/cper.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kfifo.h>
+#include <linux/slab.h>
+#include <acpi/apei.h>
+#include <ras/ras_event.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+#define AER_ERROR_SOURCES_MAX		128
+
+#define AER_MAX_TYPEOF_COR_ERRS		16	/* as per PCI_ERR_COR_STATUS */
+#define AER_MAX_TYPEOF_UNCOR_ERRS	27	/* as per PCI_ERR_UNCOR_STATUS*/
+
+struct aer_err_source {
+	unsigned int status;
+	unsigned int id;
+};
+
+struct aer_rpc {
+	struct pci_dev *rpd;		/* Root Port device */
+	DECLARE_KFIFO(aer_fifo, struct aer_err_source, AER_ERROR_SOURCES_MAX);
+};
+
+/* AER stats for the device */
+struct aer_stats {
+
+	/*
+	 * Fields for all AER capable devices. They indicate the errors
+	 * "as seen by this device". Note that this may mean that if an
+	 * end point is causing problems, the AER counters may increment
+	 * at its link partner (e.g. root port) because the errors will be
+	 * "seen" by the link partner and not the problematic end point
+	 * itself (which may report all counters as 0 as it never saw any
+	 * problems).
+	 */
+	/* Counters for different type of correctable errors */
+	u64 dev_cor_errs[AER_MAX_TYPEOF_COR_ERRS];
+	/* Counters for different type of fatal uncorrectable errors */
+	u64 dev_fatal_errs[AER_MAX_TYPEOF_UNCOR_ERRS];
+	/* Counters for different type of nonfatal uncorrectable errors */
+	u64 dev_nonfatal_errs[AER_MAX_TYPEOF_UNCOR_ERRS];
+	/* Total number of ERR_COR sent by this device */
+	u64 dev_total_cor_errs;
+	/* Total number of ERR_FATAL sent by this device */
+	u64 dev_total_fatal_errs;
+	/* Total number of ERR_NONFATAL sent by this device */
+	u64 dev_total_nonfatal_errs;
+
+	/*
+	 * Fields for Root ports & root complex event collectors only, these
+	 * indicate the total number of ERR_COR, ERR_FATAL, and ERR_NONFATAL
+	 * messages received by the root port / event collector, INCLUDING the
+	 * ones that are generated internally (by the rootport itself)
+	 */
+	u64 rootport_total_cor_errs;
+	u64 rootport_total_fatal_errs;
+	u64 rootport_total_nonfatal_errs;
+};
+
+#define AER_LOG_TLP_MASKS		(PCI_ERR_UNC_POISON_TLP|	\
+					PCI_ERR_UNC_ECRC|		\
+					PCI_ERR_UNC_UNSUP|		\
+					PCI_ERR_UNC_COMP_ABORT|		\
+					PCI_ERR_UNC_UNX_COMP|		\
+					PCI_ERR_UNC_MALF_TLP)
+
+#define SYSTEM_ERROR_INTR_ON_MESG_MASK	(PCI_EXP_RTCTL_SECEE|	\
+					PCI_EXP_RTCTL_SENFEE|	\
+					PCI_EXP_RTCTL_SEFEE)
+#define ROOT_PORT_INTR_ON_MESG_MASK	(PCI_ERR_ROOT_CMD_COR_EN|	\
+					PCI_ERR_ROOT_CMD_NONFATAL_EN|	\
+					PCI_ERR_ROOT_CMD_FATAL_EN)
+#define ERR_COR_ID(d)			(d & 0xffff)
+#define ERR_UNCOR_ID(d)			(d >> 16)
+
+#define AER_ERR_STATUS_MASK		(PCI_ERR_ROOT_UNCOR_RCV |	\
+					PCI_ERR_ROOT_COR_RCV |		\
+					PCI_ERR_ROOT_MULTI_COR_RCV |	\
+					PCI_ERR_ROOT_MULTI_UNCOR_RCV)
+
+static int pcie_aer_disable;
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
+
+void pci_no_aer(void)
+{
+	pcie_aer_disable = 1;
+}
+
+bool pci_aer_available(void)
+{
+	return !pcie_aer_disable && pci_msi_enabled();
+}
+
+#ifdef CONFIG_PCIE_ECRC
+
+#define ECRC_POLICY_DEFAULT 0		/* ECRC set by BIOS */
+#define ECRC_POLICY_OFF     1		/* ECRC off for performance */
+#define ECRC_POLICY_ON      2		/* ECRC on for data integrity */
+
+static int ecrc_policy = ECRC_POLICY_DEFAULT;
+
+static const char * const ecrc_policy_str[] = {
+	[ECRC_POLICY_DEFAULT] = "bios",
+	[ECRC_POLICY_OFF] = "off",
+	[ECRC_POLICY_ON] = "on"
+};
+
+/**
+ * enable_ecrc_checking - enable PCIe ECRC checking for a device
+ * @dev: the PCI device
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+static int enable_ecrc_checking(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	u32 reg32;
+
+	if (!aer)
+		return -ENODEV;
+
+	pci_read_config_dword(dev, aer + PCI_ERR_CAP, &reg32);
+	if (reg32 & PCI_ERR_CAP_ECRC_GENC)
+		reg32 |= PCI_ERR_CAP_ECRC_GENE;
+	if (reg32 & PCI_ERR_CAP_ECRC_CHKC)
+		reg32 |= PCI_ERR_CAP_ECRC_CHKE;
+	pci_write_config_dword(dev, aer + PCI_ERR_CAP, reg32);
+
+	return 0;
+}
+
+/**
+ * disable_ecrc_checking - disables PCIe ECRC checking for a device
+ * @dev: the PCI device
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+static int disable_ecrc_checking(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	u32 reg32;
+
+	if (!aer)
+		return -ENODEV;
+
+	pci_read_config_dword(dev, aer + PCI_ERR_CAP, &reg32);
+	reg32 &= ~(PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
+	pci_write_config_dword(dev, aer + PCI_ERR_CAP, reg32);
+
+	return 0;
+}
+
+/**
+ * pcie_set_ecrc_checking - set/unset PCIe ECRC checking for a device based on global policy
+ * @dev: the PCI device
+ */
+void pcie_set_ecrc_checking(struct pci_dev *dev)
+{
+	switch (ecrc_policy) {
+	case ECRC_POLICY_DEFAULT:
+		return;
+	case ECRC_POLICY_OFF:
+		disable_ecrc_checking(dev);
+		break;
+	case ECRC_POLICY_ON:
+		enable_ecrc_checking(dev);
+		break;
+	default:
+		return;
+	}
+}
+
+/**
+ * pcie_ecrc_get_policy - parse kernel command-line ecrc option
+ * @str: ECRC policy from kernel command line to use
+ */
+void pcie_ecrc_get_policy(char *str)
+{
+	int i;
+
+	i = match_string(ecrc_policy_str, ARRAY_SIZE(ecrc_policy_str), str);
+	if (i < 0)
+		return;
+
+	ecrc_policy = i;
+}
+#endif	/* CONFIG_PCIE_ECRC */
+
+#define	PCI_EXP_AER_FLAGS	(PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | \
+				 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE)
+
+int pcie_aer_is_native(struct pci_dev *dev)
+{
+	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+
+	if (!dev->aer_cap)
+		return 0;
+
+	return pcie_ports_native || host->native_aer;
+}
+
+int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+	int rc;
+
+	if (!pcie_aer_is_native(dev))
+		return -EIO;
+
+	rc = pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_AER_FLAGS);
+	return pcibios_err_to_errno(rc);
+}
+EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
+
+int pci_disable_pcie_error_reporting(struct pci_dev *dev)
+{
+	int rc;
+
+	if (!pcie_aer_is_native(dev))
+		return -EIO;
+
+	rc = pcie_capability_clear_word(dev, PCI_EXP_DEVCTL, PCI_EXP_AER_FLAGS);
+	return pcibios_err_to_errno(rc);
+}
+EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
+
+int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	u32 status, sev;
+
+	if (!pcie_aer_is_native(dev))
+		return -EIO;
+
+	/* Clear status bits for ERR_NONFATAL errors only */
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, &status);
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, &sev);
+	status &= ~sev;
+	if (status)
+		pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_aer_clear_nonfatal_status);
+
+void pci_aer_clear_fatal_status(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	u32 status, sev;
+
+	if (!pcie_aer_is_native(dev))
+		return;
+
+	/* Clear status bits for ERR_FATAL errors only */
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, &status);
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, &sev);
+	status &= sev;
+	if (status)
+		pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status);
+}
+
+/**
+ * pci_aer_raw_clear_status - Clear AER error registers.
+ * @dev: the PCI device
+ *
+ * Clearing AER error status registers unconditionally, regardless of
+ * whether they're owned by firmware or the OS.
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+int pci_aer_raw_clear_status(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	u32 status;
+	int port_type;
+
+	if (!aer)
+		return -EIO;
+
+	port_type = pci_pcie_type(dev);
+	if (port_type == PCI_EXP_TYPE_ROOT_PORT ||
+	    port_type == PCI_EXP_TYPE_RC_EC) {
+		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &status);
+		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, status);
+	}
+
+	pci_read_config_dword(dev, aer + PCI_ERR_COR_STATUS, &status);
+	pci_write_config_dword(dev, aer + PCI_ERR_COR_STATUS, status);
+
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, &status);
+	pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status);
+
+	return 0;
+}
+
+int pci_aer_clear_status(struct pci_dev *dev)
+{
+	if (!pcie_aer_is_native(dev))
+		return -EIO;
+
+	return pci_aer_raw_clear_status(dev);
+}
+
+void pci_save_aer_state(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	if (!aer)
+		return;
+
+	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_ERR);
+	if (!save_state)
+		return;
+
+	cap = &save_state->cap.data[0];
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, cap++);
+	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, cap++);
+	pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK, cap++);
+	pci_read_config_dword(dev, aer + PCI_ERR_CAP, cap++);
+	if (pcie_cap_has_rtctl(dev))
+		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, cap++);
+}
+
+void pci_restore_aer_state(struct pci_dev *dev)
+{
+	int aer = dev->aer_cap;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	if (!aer)
+		return;
+
+	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_ERR);
+	if (!save_state)
+		return;
+
+	cap = &save_state->cap.data[0];
+	pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, *cap++);
+	pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, *cap++);
+	pci_write_config_dword(dev, aer + PCI_ERR_COR_MASK, *cap++);
+	pci_write_config_dword(dev, aer + PCI_ERR_CAP, *cap++);
+	if (pcie_cap_has_rtctl(dev))
+		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, *cap++);
+}
+
+void pci_aer_init(struct pci_dev *dev)
+{
+	int n;
+
+	dev->aer_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!dev->aer_cap)
+		return;
+
+	dev->aer_stats = kzalloc(sizeof(struct aer_stats), GFP_KERNEL);
+
+	/*
+	 * We save/restore PCI_ERR_UNCOR_MASK, PCI_ERR_UNCOR_SEVER,
+	 * PCI_ERR_COR_MASK, and PCI_ERR_CAP.  Root and Root Complex Event
+	 * Collectors also implement PCI_ERR_ROOT_COMMAND (PCIe r5.0, sec
+	 * 7.8.4).
+	 */
+	n = pcie_cap_has_rtctl(dev) ? 5 : 4;
+	pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_ERR, sizeof(u32) * n);
+
+	pci_aer_clear_status(dev);
+
+	if (pci_aer_available())
+		pci_enable_pcie_error_reporting(dev);
+
+	pcie_set_ecrc_checking(dev);
+}
+
+void pci_aer_exit(struct pci_dev *dev)
+{
+	kfree(dev->aer_stats);
+	dev->aer_stats = NULL;
+}
+
+#define AER_AGENT_RECEIVER		0
+#define AER_AGENT_REQUESTER		1
+#define AER_AGENT_COMPLETER		2
+#define AER_AGENT_TRANSMITTER		3
+
+#define AER_AGENT_REQUESTER_MASK(t)	((t == AER_CORRECTABLE) ?	\
+	0 : (PCI_ERR_UNC_COMP_TIME|PCI_ERR_UNC_UNSUP))
+#define AER_AGENT_COMPLETER_MASK(t)	((t == AER_CORRECTABLE) ?	\
+	0 : PCI_ERR_UNC_COMP_ABORT)
+#define AER_AGENT_TRANSMITTER_MASK(t)	((t == AER_CORRECTABLE) ?	\
+	(PCI_ERR_COR_REP_ROLL|PCI_ERR_COR_REP_TIMER) : 0)
+
+#define AER_GET_AGENT(t, e)						\
+	((e & AER_AGENT_COMPLETER_MASK(t)) ? AER_AGENT_COMPLETER :	\
+	(e & AER_AGENT_REQUESTER_MASK(t)) ? AER_AGENT_REQUESTER :	\
+	(e & AER_AGENT_TRANSMITTER_MASK(t)) ? AER_AGENT_TRANSMITTER :	\
+	AER_AGENT_RECEIVER)
+
+#define AER_PHYSICAL_LAYER_ERROR	0
+#define AER_DATA_LINK_LAYER_ERROR	1
+#define AER_TRANSACTION_LAYER_ERROR	2
+
+#define AER_PHYSICAL_LAYER_ERROR_MASK(t) ((t == AER_CORRECTABLE) ?	\
+	PCI_ERR_COR_RCVR : 0)
+#define AER_DATA_LINK_LAYER_ERROR_MASK(t) ((t == AER_CORRECTABLE) ?	\
+	(PCI_ERR_COR_BAD_TLP|						\
+	PCI_ERR_COR_BAD_DLLP|						\
+	PCI_ERR_COR_REP_ROLL|						\
+	PCI_ERR_COR_REP_TIMER) : PCI_ERR_UNC_DLP)
+
+#define AER_GET_LAYER_ERROR(t, e)					\
+	((e & AER_PHYSICAL_LAYER_ERROR_MASK(t)) ? AER_PHYSICAL_LAYER_ERROR : \
+	(e & AER_DATA_LINK_LAYER_ERROR_MASK(t)) ? AER_DATA_LINK_LAYER_ERROR : \
+	AER_TRANSACTION_LAYER_ERROR)
+
+/*
+ * AER error strings
+ */
+static const char *aer_error_severity_string[] = {
+	"Uncorrected (Non-Fatal)",
+	"Uncorrected (Fatal)",
+	"Corrected"
+};
+
+static const char *aer_error_layer[] = {
+	"Physical Layer",
+	"Data Link Layer",
+	"Transaction Layer"
+};
+
+static const char *aer_correctable_error_string[] = {
+	"RxErr",			/* Bit Position 0	*/
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	"BadTLP",			/* Bit Position 6	*/
+	"BadDLLP",			/* Bit Position 7	*/
+	"Rollover",			/* Bit Position 8	*/
+	NULL,
+	NULL,
+	NULL,
+	"Timeout",			/* Bit Position 12	*/
+	"NonFatalErr",			/* Bit Position 13	*/
+	"CorrIntErr",			/* Bit Position 14	*/
+	"HeaderOF",			/* Bit Position 15	*/
+	NULL,				/* Bit Position 16	*/
+	NULL,				/* Bit Position 17	*/
+	NULL,				/* Bit Position 18	*/
+	NULL,				/* Bit Position 19	*/
+	NULL,				/* Bit Position 20	*/
+	NULL,				/* Bit Position 21	*/
+	NULL,				/* Bit Position 22	*/
+	NULL,				/* Bit Position 23	*/
+	NULL,				/* Bit Position 24	*/
+	NULL,				/* Bit Position 25	*/
+	NULL,				/* Bit Position 26	*/
+	NULL,				/* Bit Position 27	*/
+	NULL,				/* Bit Position 28	*/
+	NULL,				/* Bit Position 29	*/
+	NULL,				/* Bit Position 30	*/
+	NULL,				/* Bit Position 31	*/
+};
+
+static const char *aer_uncorrectable_error_string[] = {
+	"Undefined",			/* Bit Position 0	*/
+	NULL,
+	NULL,
+	NULL,
+	"DLP",				/* Bit Position 4	*/
+	"SDES",				/* Bit Position 5	*/
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	"TLP",				/* Bit Position 12	*/
+	"FCP",				/* Bit Position 13	*/
+	"CmpltTO",			/* Bit Position 14	*/
+	"CmpltAbrt",			/* Bit Position 15	*/
+	"UnxCmplt",			/* Bit Position 16	*/
+	"RxOF",				/* Bit Position 17	*/
+	"MalfTLP",			/* Bit Position 18	*/
+	"ECRC",				/* Bit Position 19	*/
+	"UnsupReq",			/* Bit Position 20	*/
+	"ACSViol",			/* Bit Position 21	*/
+	"UncorrIntErr",			/* Bit Position 22	*/
+	"BlockedTLP",			/* Bit Position 23	*/
+	"AtomicOpBlocked",		/* Bit Position 24	*/
+	"TLPBlockedErr",		/* Bit Position 25	*/
+	"PoisonTLPBlocked",		/* Bit Position 26	*/
+	NULL,				/* Bit Position 27	*/
+	NULL,				/* Bit Position 28	*/
+	NULL,				/* Bit Position 29	*/
+	NULL,				/* Bit Position 30	*/
+	NULL,				/* Bit Position 31	*/
+};
+
+static const char *aer_agent_string[] = {
+	"Receiver ID",
+	"Requester ID",
+	"Completer ID",
+	"Transmitter ID"
+};
+
+#define aer_stats_dev_attr(name, stats_array, strings_array,		\
+			   total_string, total_field)			\
+	static ssize_t							\
+	name##_show(struct device *dev, struct device_attribute *attr,	\
+		     char *buf)						\
+{									\
+	unsigned int i;							\
+	struct pci_dev *pdev = to_pci_dev(dev);				\
+	u64 *stats = pdev->aer_stats->stats_array;			\
+	size_t len = 0;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(pdev->aer_stats->stats_array); i++) {\
+		if (strings_array[i])					\
+			len += sysfs_emit_at(buf, len, "%s %llu\n",	\
+					     strings_array[i],		\
+					     stats[i]);			\
+		else if (stats[i])					\
+			len += sysfs_emit_at(buf, len,			\
+					     #stats_array "_bit[%d] %llu\n",\
+					     i, stats[i]);		\
+	}								\
+	len += sysfs_emit_at(buf, len, "TOTAL_%s %llu\n", total_string,	\
+			     pdev->aer_stats->total_field);		\
+	return len;							\
+}									\
+static DEVICE_ATTR_RO(name)
+
+aer_stats_dev_attr(aer_dev_correctable, dev_cor_errs,
+		   aer_correctable_error_string, "ERR_COR",
+		   dev_total_cor_errs);
+aer_stats_dev_attr(aer_dev_fatal, dev_fatal_errs,
+		   aer_uncorrectable_error_string, "ERR_FATAL",
+		   dev_total_fatal_errs);
+aer_stats_dev_attr(aer_dev_nonfatal, dev_nonfatal_errs,
+		   aer_uncorrectable_error_string, "ERR_NONFATAL",
+		   dev_total_nonfatal_errs);
+
+#define aer_stats_rootport_attr(name, field)				\
+	static ssize_t							\
+	name##_show(struct device *dev, struct device_attribute *attr,	\
+		     char *buf)						\
+{									\
+	struct pci_dev *pdev = to_pci_dev(dev);				\
+	return sysfs_emit(buf, "%llu\n", pdev->aer_stats->field);	\
+}									\
+static DEVICE_ATTR_RO(name)
+
+aer_stats_rootport_attr(aer_rootport_total_err_cor,
+			 rootport_total_cor_errs);
+aer_stats_rootport_attr(aer_rootport_total_err_fatal,
+			 rootport_total_fatal_errs);
+aer_stats_rootport_attr(aer_rootport_total_err_nonfatal,
+			 rootport_total_nonfatal_errs);
+
+static struct attribute *aer_stats_attrs[] __ro_after_init = {
+	&dev_attr_aer_dev_correctable.attr,
+	&dev_attr_aer_dev_fatal.attr,
+	&dev_attr_aer_dev_nonfatal.attr,
+	&dev_attr_aer_rootport_total_err_cor.attr,
+	&dev_attr_aer_rootport_total_err_fatal.attr,
+	&dev_attr_aer_rootport_total_err_nonfatal.attr,
+	NULL
+};
+
+static umode_t aer_stats_attrs_are_visible(struct kobject *kobj,
+					   struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (!pdev->aer_stats)
+		return 0;
+
+	if ((a == &dev_attr_aer_rootport_total_err_cor.attr ||
+	     a == &dev_attr_aer_rootport_total_err_fatal.attr ||
+	     a == &dev_attr_aer_rootport_total_err_nonfatal.attr) &&
+	    ((pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT) &&
+	     (pci_pcie_type(pdev) != PCI_EXP_TYPE_RC_EC)))
+		return 0;
+
+	return a->mode;
+}
+
+const struct attribute_group aer_stats_attr_group = {
+	.attrs  = aer_stats_attrs,
+	.is_visible = aer_stats_attrs_are_visible,
+};
+
+static void pci_dev_aer_stats_incr(struct pci_dev *pdev,
+				   struct aer_err_info *info)
+{
+	unsigned long status = info->status & ~info->mask;
+	int i, max = -1;
+	u64 *counter = NULL;
+	struct aer_stats *aer_stats = pdev->aer_stats;
+
+	if (!aer_stats)
+		return;
+
+	switch (info->severity) {
+	case AER_CORRECTABLE:
+		aer_stats->dev_total_cor_errs++;
+		counter = &aer_stats->dev_cor_errs[0];
+		max = AER_MAX_TYPEOF_COR_ERRS;
+		break;
+	case AER_NONFATAL:
+		aer_stats->dev_total_nonfatal_errs++;
+		counter = &aer_stats->dev_nonfatal_errs[0];
+		max = AER_MAX_TYPEOF_UNCOR_ERRS;
+		break;
+	case AER_FATAL:
+		aer_stats->dev_total_fatal_errs++;
+		counter = &aer_stats->dev_fatal_errs[0];
+		max = AER_MAX_TYPEOF_UNCOR_ERRS;
+		break;
+	}
+
+	for_each_set_bit(i, &status, max)
+		counter[i]++;
+}
+
+static void pci_rootport_aer_stats_incr(struct pci_dev *pdev,
+				 struct aer_err_source *e_src)
+{
+	struct aer_stats *aer_stats = pdev->aer_stats;
+
+	if (!aer_stats)
+		return;
+
+	if (e_src->status & PCI_ERR_ROOT_COR_RCV)
+		aer_stats->rootport_total_cor_errs++;
+
+	if (e_src->status & PCI_ERR_ROOT_UNCOR_RCV) {
+		if (e_src->status & PCI_ERR_ROOT_FATAL_RCV)
+			aer_stats->rootport_total_fatal_errs++;
+		else
+			aer_stats->rootport_total_nonfatal_errs++;
+	}
+}
+
+static void __print_tlp_header(struct pci_dev *dev,
+			       struct aer_header_log_regs *t)
+{
+	pci_err(dev, "  TLP Header: %08x %08x %08x %08x\n",
+		t->dw0, t->dw1, t->dw2, t->dw3);
+}
+
+static void __aer_print_error(struct pci_dev *dev,
+			      struct aer_err_info *info)
+{
+	const char **strings;
+	unsigned long status = info->status & ~info->mask;
+	const char *level, *errmsg;
+	int i;
+
+	if (info->severity == AER_CORRECTABLE) {
+		strings = aer_correctable_error_string;
+		level = KERN_WARNING;
+	} else {
+		strings = aer_uncorrectable_error_string;
+		level = KERN_ERR;
+	}
+
+	for_each_set_bit(i, &status, 32) {
+		errmsg = strings[i];
+		if (!errmsg)
+			errmsg = "Unknown Error Bit";
+
+		pci_printk(level, dev, "   [%2d] %-22s%s\n", i, errmsg,
+				info->first_error == i ? " (First)" : "");
+	}
+	pci_dev_aer_stats_incr(dev, info);
+}
+
+void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
+{
+	int layer, agent;
+	int id = ((dev->bus->number << 8) | dev->devfn);
+	const char *level;
+
+	if (!info->status) {
+		pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent ID)\n",
+			aer_error_severity_string[info->severity]);
+		goto out;
+	}
+
+	layer = AER_GET_LAYER_ERROR(info->severity, info->status);
+	agent = AER_GET_AGENT(info->severity, info->status);
+
+	level = (info->severity == AER_CORRECTABLE) ? KERN_WARNING : KERN_ERR;
+
+	pci_printk(level, dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
+		   aer_error_severity_string[info->severity],
+		   aer_error_layer[layer], aer_agent_string[agent]);
+
+	pci_printk(level, dev, "  device [%04x:%04x] error status/mask=%08x/%08x\n",
+		   dev->vendor, dev->device, info->status, info->mask);
+
+	__aer_print_error(dev, info);
+
+	if (info->tlp_header_valid)
+		__print_tlp_header(dev, &info->tlp);
+
+out:
+	if (info->id && info->error_dev_num > 1 && info->id == id)
+		pci_err(dev, "  Error of this Agent is reported first\n");
+
+	trace_aer_event(dev_name(&dev->dev), (info->status & ~info->mask),
+			info->severity, info->tlp_header_valid, &info->tlp);
+}
+
+static void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
+{
+	u8 bus = info->id >> 8;
+	u8 devfn = info->id & 0xff;
+
+	pci_info(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
+		 info->multi_error_valid ? "Multiple " : "",
+		 aer_error_severity_string[info->severity],
+		 pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
+		 PCI_FUNC(devfn));
+}
+
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+int cper_severity_to_aer(int cper_severity)
+{
+	switch (cper_severity) {
+	case CPER_SEV_RECOVERABLE:
+		return AER_NONFATAL;
+	case CPER_SEV_FATAL:
+		return AER_FATAL;
+	default:
+		return AER_CORRECTABLE;
+	}
+}
+EXPORT_SYMBOL_GPL(cper_severity_to_aer);
+
+void cper_print_aer(struct pci_dev *dev, int aer_severity,
+		    struct aer_capability_regs *aer)
+{
+	int layer, agent, tlp_header_valid = 0;
+	u32 status, mask;
+	struct aer_err_info info;
+
+	if (aer_severity == AER_CORRECTABLE) {
+		status = aer->cor_status;
+		mask = aer->cor_mask;
+	} else {
+		status = aer->uncor_status;
+		mask = aer->uncor_mask;
+		tlp_header_valid = status & AER_LOG_TLP_MASKS;
+	}
+
+	layer = AER_GET_LAYER_ERROR(aer_severity, status);
+	agent = AER_GET_AGENT(aer_severity, status);
+
+	memset(&info, 0, sizeof(info));
+	info.severity = aer_severity;
+	info.status = status;
+	info.mask = mask;
+	info.first_error = PCI_ERR_CAP_FEP(aer->cap_control);
+
+	pci_err(dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask);
+	__aer_print_error(dev, &info);
+	pci_err(dev, "aer_layer=%s, aer_agent=%s\n",
+		aer_error_layer[layer], aer_agent_string[agent]);
+
+	if (aer_severity != AER_CORRECTABLE)
+		pci_err(dev, "aer_uncor_severity: 0x%08x\n",
+			aer->uncor_severity);
+
+	if (tlp_header_valid)
+		__print_tlp_header(dev, &aer->header_log);
+
+	trace_aer_event(dev_name(&dev->dev), (status & ~mask),
+			aer_severity, tlp_header_valid, &aer->header_log);
+}
+#endif
+
+/**
+ * add_error_device - list device to be handled
+ * @e_info: pointer to error info
+ * @dev: pointer to pci_dev to be added
+ */
+static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
+{
+	if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
+		e_info->dev[e_info->error_dev_num] = pci_dev_get(dev);
+		e_info->error_dev_num++;
+		return 0;
+	}
+	return -ENOSPC;
+}
+
+/**
+ * is_error_source - check whether the device is source of reported error
+ * @dev: pointer to pci_dev to be checked
+ * @e_info: pointer to reported error info
+ */
+static bool is_error_source(struct pci_dev *dev, struct aer_err_info *e_info)
+{
+	int aer = dev->aer_cap;
+	u32 status, mask;
+	u16 reg16;
+
+	/*
+	 * When bus id is equal to 0, it might be a bad id
+	 * reported by root port.
+	 */
+	if ((PCI_BUS_NUM(e_info->id) != 0) &&
+	    !(dev->bus->bus_flags & PCI_BUS_FLAGS_NO_AERSID)) {
+		/* Device ID match? */
+		if (e_info->id == ((dev->bus->number << 8) | dev->devfn))
+			return true;
+
+		/* Continue id comparing if there is no multiple error */
+		if (!e_info->multi_error_valid)
+			return false;
+	}
+
+	/*
+	 * When either
+	 *      1) bus id is equal to 0. Some ports might lose the bus
+	 *              id of error source id;
+	 *      2) bus flag PCI_BUS_FLAGS_NO_AERSID is set
+	 *      3) There are multiple errors and prior ID comparing fails;
+	 * We check AER status registers to find possible reporter.
+	 */
+	if (atomic_read(&dev->enable_cnt) == 0)
+		return false;
+
+	/* Check if AER is enabled */
+	pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &reg16);
+	if (!(reg16 & PCI_EXP_AER_FLAGS))
+		return false;
+
+	if (!aer)
+		return false;
+
+	/* Check if error is recorded */
+	if (e_info->severity == AER_CORRECTABLE) {
+		pci_read_config_dword(dev, aer + PCI_ERR_COR_STATUS, &status);
+		pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK, &mask);
+	} else {
+		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, &status);
+		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, &mask);
+	}
+	if (status & ~mask)
+		return true;
+
+	return false;
+}
+
+static int find_device_iter(struct pci_dev *dev, void *data)
+{
+	struct aer_err_info *e_info = (struct aer_err_info *)data;
+
+	if (is_error_source(dev, e_info)) {
+		/* List this device */
+		if (add_error_device(e_info, dev)) {
+			/* We cannot handle more... Stop iteration */
+			/* TODO: Should print error message here? */
+			return 1;
+		}
+
+		/* If there is only a single error, stop iteration */
+		if (!e_info->multi_error_valid)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * find_source_device - search through device hierarchy for source device
+ * @parent: pointer to Root Port pci_dev data structure
+ * @e_info: including detailed error information such like id
+ *
+ * Return true if found.
+ *
+ * Invoked by DPC when error is detected at the Root Port.
+ * Caller of this function must set id, severity, and multi_error_valid of
+ * struct aer_err_info pointed by @e_info properly.  This function must fill
+ * e_info->error_dev_num and e_info->dev[], based on the given information.
+ */
+static bool find_source_device(struct pci_dev *parent,
+		struct aer_err_info *e_info)
+{
+	struct pci_dev *dev = parent;
+	int result;
+
+	/* Must reset in this function */
+	e_info->error_dev_num = 0;
+
+	/* Is Root Port an agent that sends error message? */
+	result = find_device_iter(dev, e_info);
+	if (result)
+		return true;
+
+	if (pci_pcie_type(parent) == PCI_EXP_TYPE_RC_EC)
+		pcie_walk_rcec(parent, find_device_iter, e_info);
+	else
+		pci_walk_bus(parent->subordinate, find_device_iter, e_info);
+
+	if (!e_info->error_dev_num) {
+		pci_info(parent, "can't find device of ID%04x\n", e_info->id);
+		return false;
+	}
+	return true;
+}
+
+/**
+ * handle_error_source - handle logging error into an event log
+ * @dev: pointer to pci_dev data structure of error source device
+ * @info: comprehensive error information
+ *
+ * Invoked when an error being detected by Root Port.
+ */
+static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
+{
+	int aer = dev->aer_cap;
+
+	if (info->severity == AER_CORRECTABLE) {
+		/*
+		 * Correctable error does not need software intervention.
+		 * No need to go through error recovery process.
+		 */
+		if (aer)
+			pci_write_config_dword(dev, aer + PCI_ERR_COR_STATUS,
+					info->status);
+		if (pcie_aer_is_native(dev))
+			pcie_clear_device_status(dev);
+	} else if (info->severity == AER_NONFATAL)
+		pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
+	else if (info->severity == AER_FATAL)
+		pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
+	pci_dev_put(dev);
+}
+
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+
+#define AER_RECOVER_RING_ORDER		4
+#define AER_RECOVER_RING_SIZE		(1 << AER_RECOVER_RING_ORDER)
+
+struct aer_recover_entry {
+	u8	bus;
+	u8	devfn;
+	u16	domain;
+	int	severity;
+	struct aer_capability_regs *regs;
+};
+
+static DEFINE_KFIFO(aer_recover_ring, struct aer_recover_entry,
+		    AER_RECOVER_RING_SIZE);
+
+static void aer_recover_work_func(struct work_struct *work)
+{
+	struct aer_recover_entry entry;
+	struct pci_dev *pdev;
+
+	while (kfifo_get(&aer_recover_ring, &entry)) {
+		pdev = pci_get_domain_bus_and_slot(entry.domain, entry.bus,
+						   entry.devfn);
+		if (!pdev) {
+			pr_err("no pci_dev for %04x:%02x:%02x.%x\n",
+			       entry.domain, entry.bus,
+			       PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn));
+			continue;
+		}
+		cper_print_aer(pdev, entry.severity, entry.regs);
+		if (entry.severity == AER_NONFATAL)
+			pcie_do_recovery(pdev, pci_channel_io_normal,
+					 aer_root_reset);
+		else if (entry.severity == AER_FATAL)
+			pcie_do_recovery(pdev, pci_channel_io_frozen,
+					 aer_root_reset);
+		pci_dev_put(pdev);
+	}
+}
+
+/*
+ * Mutual exclusion for writers of aer_recover_ring, reader side don't
+ * need lock, because there is only one reader and lock is not needed
+ * between reader and writer.
+ */
+static DEFINE_SPINLOCK(aer_recover_ring_lock);
+static DECLARE_WORK(aer_recover_work, aer_recover_work_func);
+
+void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
+		       int severity, struct aer_capability_regs *aer_regs)
+{
+	struct aer_recover_entry entry = {
+		.bus		= bus,
+		.devfn		= devfn,
+		.domain		= domain,
+		.severity	= severity,
+		.regs		= aer_regs,
+	};
+
+	if (kfifo_in_spinlocked(&aer_recover_ring, &entry, 1,
+				 &aer_recover_ring_lock))
+		schedule_work(&aer_recover_work);
+	else
+		pr_err("buffer overflow in recovery for %04x:%02x:%02x.%x\n",
+		       domain, bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
+}
+EXPORT_SYMBOL_GPL(aer_recover_queue);
+#endif
+
+/**
+ * aer_get_device_error_info - read error status from dev and store it to info
+ * @dev: pointer to the device expected to have a error record
+ * @info: pointer to structure to store the error record
+ *
+ * Return 1 on success, 0 on error.
+ *
+ * Note that @info is reused among all error devices. Clear fields properly.
+ */
+int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
+{
+	int type = pci_pcie_type(dev);
+	int aer = dev->aer_cap;
+	int temp;
+
+	/* Must reset in this function */
+	info->status = 0;
+	info->tlp_header_valid = 0;
+
+	/* The device might not support AER */
+	if (!aer)
+		return 0;
+
+	if (info->severity == AER_CORRECTABLE) {
+		pci_read_config_dword(dev, aer + PCI_ERR_COR_STATUS,
+			&info->status);
+		pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK,
+			&info->mask);
+		if (!(info->status & ~info->mask))
+			return 0;
+	} else if (type == PCI_EXP_TYPE_ROOT_PORT ||
+		   type == PCI_EXP_TYPE_RC_EC ||
+		   type == PCI_EXP_TYPE_DOWNSTREAM ||
+		   info->severity == AER_NONFATAL) {
+
+		/* Link is still healthy for IO reads */
+		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS,
+			&info->status);
+		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK,
+			&info->mask);
+		if (!(info->status & ~info->mask))
+			return 0;
+
+		/* Get First Error Pointer */
+		pci_read_config_dword(dev, aer + PCI_ERR_CAP, &temp);
+		info->first_error = PCI_ERR_CAP_FEP(temp);
+
+		if (info->status & AER_LOG_TLP_MASKS) {
+			info->tlp_header_valid = 1;
+			pci_read_config_dword(dev,
+				aer + PCI_ERR_HEADER_LOG, &info->tlp.dw0);
+			pci_read_config_dword(dev,
+				aer + PCI_ERR_HEADER_LOG + 4, &info->tlp.dw1);
+			pci_read_config_dword(dev,
+				aer + PCI_ERR_HEADER_LOG + 8, &info->tlp.dw2);
+			pci_read_config_dword(dev,
+				aer + PCI_ERR_HEADER_LOG + 12, &info->tlp.dw3);
+		}
+	}
+
+	return 1;
+}
+
+static inline void aer_process_err_devices(struct aer_err_info *e_info)
+{
+	int i;
+
+	/* Report all before handle them, not to lost records by reset etc. */
+	for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
+		if (aer_get_device_error_info(e_info->dev[i], e_info))
+			aer_print_error(e_info->dev[i], e_info);
+	}
+	for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
+		if (aer_get_device_error_info(e_info->dev[i], e_info))
+			handle_error_source(e_info->dev[i], e_info);
+	}
+}
+
+/**
+ * aer_isr_one_error - consume an error detected by root port
+ * @rpc: pointer to the root port which holds an error
+ * @e_src: pointer to an error source
+ */
+static void aer_isr_one_error(struct aer_rpc *rpc,
+		struct aer_err_source *e_src)
+{
+	struct pci_dev *pdev = rpc->rpd;
+	struct aer_err_info e_info;
+
+	pci_rootport_aer_stats_incr(pdev, e_src);
+
+	/*
+	 * There is a possibility that both correctable error and
+	 * uncorrectable error being logged. Report correctable error first.
+	 */
+	if (e_src->status & PCI_ERR_ROOT_COR_RCV) {
+		e_info.id = ERR_COR_ID(e_src->id);
+		e_info.severity = AER_CORRECTABLE;
+
+		if (e_src->status & PCI_ERR_ROOT_MULTI_COR_RCV)
+			e_info.multi_error_valid = 1;
+		else
+			e_info.multi_error_valid = 0;
+		aer_print_port_info(pdev, &e_info);
+
+		if (find_source_device(pdev, &e_info))
+			aer_process_err_devices(&e_info);
+	}
+
+	if (e_src->status & PCI_ERR_ROOT_UNCOR_RCV) {
+		e_info.id = ERR_UNCOR_ID(e_src->id);
+
+		if (e_src->status & PCI_ERR_ROOT_FATAL_RCV)
+			e_info.severity = AER_FATAL;
+		else
+			e_info.severity = AER_NONFATAL;
+
+		if (e_src->status & PCI_ERR_ROOT_MULTI_UNCOR_RCV)
+			e_info.multi_error_valid = 1;
+		else
+			e_info.multi_error_valid = 0;
+
+		aer_print_port_info(pdev, &e_info);
+
+		if (find_source_device(pdev, &e_info))
+			aer_process_err_devices(&e_info);
+	}
+}
+
+/**
+ * aer_isr - consume errors detected by root port
+ * @irq: IRQ assigned to Root Port
+ * @context: pointer to Root Port data structure
+ *
+ * Invoked, as DPC, when root port records new detected error
+ */
+static irqreturn_t aer_isr(int irq, void *context)
+{
+	struct pcie_device *dev = (struct pcie_device *)context;
+	struct aer_rpc *rpc = get_service_data(dev);
+	struct aer_err_source e_src;
+
+	if (kfifo_is_empty(&rpc->aer_fifo))
+		return IRQ_NONE;
+
+	while (kfifo_get(&rpc->aer_fifo, &e_src))
+		aer_isr_one_error(rpc, &e_src);
+	return IRQ_HANDLED;
+}
+
+/**
+ * aer_irq - Root Port's ISR
+ * @irq: IRQ assigned to Root Port
+ * @context: pointer to Root Port data structure
+ *
+ * Invoked when Root Port detects AER messages.
+ */
+static irqreturn_t aer_irq(int irq, void *context)
+{
+	struct pcie_device *pdev = (struct pcie_device *)context;
+	struct aer_rpc *rpc = get_service_data(pdev);
+	struct pci_dev *rp = rpc->rpd;
+	int aer = rp->aer_cap;
+	struct aer_err_source e_src = {};
+
+	pci_read_config_dword(rp, aer + PCI_ERR_ROOT_STATUS, &e_src.status);
+	if (!(e_src.status & AER_ERR_STATUS_MASK))
+		return IRQ_NONE;
+
+	pci_read_config_dword(rp, aer + PCI_ERR_ROOT_ERR_SRC, &e_src.id);
+	pci_write_config_dword(rp, aer + PCI_ERR_ROOT_STATUS, e_src.status);
+
+	if (!kfifo_put(&rpc->aer_fifo, e_src))
+		return IRQ_HANDLED;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int set_device_error_reporting(struct pci_dev *dev, void *data)
+{
+	bool enable = *((bool *)data);
+	int type = pci_pcie_type(dev);
+
+	if ((type == PCI_EXP_TYPE_ROOT_PORT) ||
+	    (type == PCI_EXP_TYPE_RC_EC) ||
+	    (type == PCI_EXP_TYPE_UPSTREAM) ||
+	    (type == PCI_EXP_TYPE_DOWNSTREAM)) {
+		if (enable)
+			pci_enable_pcie_error_reporting(dev);
+		else
+			pci_disable_pcie_error_reporting(dev);
+	}
+
+	return 0;
+}
+
+/**
+ * set_downstream_devices_error_reporting - enable/disable the error reporting  bits on the root port and its downstream ports.
+ * @dev: pointer to root port's pci_dev data structure
+ * @enable: true = enable error reporting, false = disable error reporting.
+ */
+static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+						   bool enable)
+{
+	set_device_error_reporting(dev, &enable);
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
+		pcie_walk_rcec(dev, set_device_error_reporting, &enable);
+	else if (dev->subordinate)
+		pci_walk_bus(dev->subordinate, set_device_error_reporting,
+			     &enable);
+
+}
+
+/**
+ * aer_enable_rootport - enable Root Port's interrupts when receiving messages
+ * @rpc: pointer to a Root Port data structure
+ *
+ * Invoked when PCIe bus loads AER service driver.
+ */
+static void aer_enable_rootport(struct aer_rpc *rpc)
+{
+	struct pci_dev *pdev = rpc->rpd;
+	int aer = pdev->aer_cap;
+	u16 reg16;
+	u32 reg32;
+
+	/* Clear PCIe Capability's Device Status */
+	pcie_capability_read_word(pdev, PCI_EXP_DEVSTA, &reg16);
+	pcie_capability_write_word(pdev, PCI_EXP_DEVSTA, reg16);
+
+	/* Disable system error generation in response to error messages */
+	pcie_capability_clear_word(pdev, PCI_EXP_RTCTL,
+				   SYSTEM_ERROR_INTR_ON_MESG_MASK);
+
+	/* Clear error status */
+	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_STATUS, &reg32);
+	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_STATUS, reg32);
+	pci_read_config_dword(pdev, aer + PCI_ERR_COR_STATUS, &reg32);
+	pci_write_config_dword(pdev, aer + PCI_ERR_COR_STATUS, reg32);
+	pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, &reg32);
+	pci_write_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, reg32);
+
+	/*
+	 * Enable error reporting for the root port device and downstream port
+	 * devices.
+	 */
+	set_downstream_devices_error_reporting(pdev, true);
+
+	/* Enable Root Port's interrupt in response to error messages */
+	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
+	reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
+	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+}
+
+/**
+ * aer_disable_rootport - disable Root Port's interrupts when receiving messages
+ * @rpc: pointer to a Root Port data structure
+ *
+ * Invoked when PCIe bus unloads AER service driver.
+ */
+static void aer_disable_rootport(struct aer_rpc *rpc)
+{
+	struct pci_dev *pdev = rpc->rpd;
+	int aer = pdev->aer_cap;
+	u32 reg32;
+
+	/*
+	 * Disable error reporting for the root port device and downstream port
+	 * devices.
+	 */
+	set_downstream_devices_error_reporting(pdev, false);
+
+	/* Disable Root's interrupt in response to error messages */
+	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
+	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
+	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+
+	/* Clear Root's error status reg */
+	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_STATUS, &reg32);
+	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_STATUS, reg32);
+}
+
+/**
+ * aer_remove - clean up resources
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Invoked when PCI Express bus unloads or AER probe fails.
+ */
+static void aer_remove(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc = get_service_data(dev);
+
+	aer_disable_rootport(rpc);
+}
+
+/**
+ * aer_probe - initialize resources
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Invoked when PCI Express bus loads AER service driver.
+ */
+static int aer_probe(struct pcie_device *dev)
+{
+	int status;
+	struct aer_rpc *rpc;
+	struct device *device = &dev->device;
+	struct pci_dev *port = dev->port;
+
+	BUILD_BUG_ON(ARRAY_SIZE(aer_correctable_error_string) <
+		     AER_MAX_TYPEOF_COR_ERRS);
+	BUILD_BUG_ON(ARRAY_SIZE(aer_uncorrectable_error_string) <
+		     AER_MAX_TYPEOF_UNCOR_ERRS);
+
+	/* Limit to Root Ports or Root Complex Event Collectors */
+	if ((pci_pcie_type(port) != PCI_EXP_TYPE_RC_EC) &&
+	    (pci_pcie_type(port) != PCI_EXP_TYPE_ROOT_PORT))
+		return -ENODEV;
+
+	rpc = devm_kzalloc(device, sizeof(struct aer_rpc), GFP_KERNEL);
+	if (!rpc)
+		return -ENOMEM;
+
+	rpc->rpd = port;
+	INIT_KFIFO(rpc->aer_fifo);
+	set_service_data(dev, rpc);
+
+	status = devm_request_threaded_irq(device, dev->irq, aer_irq, aer_isr,
+					   IRQF_SHARED, "aerdrv", dev);
+	if (status) {
+		pci_err(port, "request AER IRQ %d failed\n", dev->irq);
+		return status;
+	}
+
+	aer_enable_rootport(rpc);
+	pci_info(port, "enabled with IRQ %d\n", dev->irq);
+	return 0;
+}
+
+/**
+ * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
+ * @dev: pointer to Root Port, RCEC, or RCiEP
+ *
+ * Invoked by Port Bus driver when performing reset.
+ */
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
+{
+	int type = pci_pcie_type(dev);
+	struct pci_dev *root;
+	int aer;
+	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+	u32 reg32;
+	int rc;
+
+	/*
+	 * Only Root Ports and RCECs have AER Root Command and Root Status
+	 * registers.  If "dev" is an RCiEP, the relevant registers are in
+	 * the RCEC.
+	 */
+	if (type == PCI_EXP_TYPE_RC_END)
+		root = dev->rcec;
+	else
+		root = pcie_find_root_port(dev);
+
+	/*
+	 * If the platform retained control of AER, an RCiEP may not have
+	 * an RCEC visible to us, so dev->rcec ("root") may be NULL.  In
+	 * that case, firmware is responsible for these registers.
+	 */
+	aer = root ? root->aer_cap : 0;
+
+	if ((host->native_aer || pcie_ports_native) && aer) {
+		/* Disable Root's interrupt in response to error messages */
+		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
+		reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
+		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
+	}
+
+	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
+		rc = pcie_reset_flr(dev, PCI_RESET_DO_RESET);
+		if (!rc)
+			pci_info(dev, "has been reset\n");
+		else
+			pci_info(dev, "not reset (no FLR support: %d)\n", rc);
+	} else {
+		rc = pci_bus_error_reset(dev);
+		pci_info(dev, "%s Port link has been reset (%d)\n",
+			pci_is_root_bus(dev->bus) ? "Root" : "Downstream", rc);
+	}
+
+	if ((host->native_aer || pcie_ports_native) && aer) {
+		/* Clear Root Error Status */
+		pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
+		pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
+
+		/* Enable Root Port's interrupt in response to error messages */
+		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
+		reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
+		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
+	}
+
+	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
+}
+
+static struct pcie_port_service_driver aerdriver = {
+	.name		= "aer",
+	.port_type	= PCIE_ANY_PORT,
+	.service	= PCIE_PORT_SERVICE_AER,
+
+	.probe		= aer_probe,
+	.remove		= aer_remove,
+};
+
+/**
+ * pcie_aer_init - register AER root service driver
+ *
+ * Invoked when AER root service driver is loaded.
+ */
+int __init pcie_aer_init(void)
+{
+	if (!pci_aer_available())
+		return -ENXIO;
+	return pcie_port_service_register(&aerdriver);
+}
diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c
new file mode 100644
index 000000000..2dab275d2
--- /dev/null
+++ b/drivers/pci/pcie/aer_inject.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe AER software error injection support.
+ *
+ * Debugging PCIe AER code is quite difficult because it is hard to
+ * trigger various real hardware errors. Software based error
+ * injection can fake almost all kinds of errors with the help of a
+ * user space helper tool aer-inject, which can be gotten from:
+ *   https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
+ *
+ * Copyright 2009 Intel Corporation.
+ *     Huang Ying <ying.huang@intel.com>
+ */
+
+#define dev_fmt(fmt) "aer_inject: " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/stddef.h>
+#include <linux/device.h>
+
+#include "portdrv.h"
+
+/* Override the existing corrected and uncorrected error masks */
+static bool aer_mask_override;
+module_param(aer_mask_override, bool, 0);
+
+struct aer_error_inj {
+	u8 bus;
+	u8 dev;
+	u8 fn;
+	u32 uncor_status;
+	u32 cor_status;
+	u32 header_log0;
+	u32 header_log1;
+	u32 header_log2;
+	u32 header_log3;
+	u32 domain;
+};
+
+struct aer_error {
+	struct list_head list;
+	u32 domain;
+	unsigned int bus;
+	unsigned int devfn;
+	int pos_cap_err;
+
+	u32 uncor_status;
+	u32 cor_status;
+	u32 header_log0;
+	u32 header_log1;
+	u32 header_log2;
+	u32 header_log3;
+	u32 root_status;
+	u32 source_id;
+};
+
+struct pci_bus_ops {
+	struct list_head list;
+	struct pci_bus *bus;
+	struct pci_ops *ops;
+};
+
+static LIST_HEAD(einjected);
+
+static LIST_HEAD(pci_bus_ops_list);
+
+/* Protect einjected and pci_bus_ops_list */
+static DEFINE_SPINLOCK(inject_lock);
+
+static void aer_error_init(struct aer_error *err, u32 domain,
+			   unsigned int bus, unsigned int devfn,
+			   int pos_cap_err)
+{
+	INIT_LIST_HEAD(&err->list);
+	err->domain = domain;
+	err->bus = bus;
+	err->devfn = devfn;
+	err->pos_cap_err = pos_cap_err;
+}
+
+/* inject_lock must be held before calling */
+static struct aer_error *__find_aer_error(u32 domain, unsigned int bus,
+					  unsigned int devfn)
+{
+	struct aer_error *err;
+
+	list_for_each_entry(err, &einjected, list) {
+		if (domain == err->domain &&
+		    bus == err->bus &&
+		    devfn == err->devfn)
+			return err;
+	}
+	return NULL;
+}
+
+/* inject_lock must be held before calling */
+static struct aer_error *__find_aer_error_by_dev(struct pci_dev *dev)
+{
+	int domain = pci_domain_nr(dev->bus);
+	if (domain < 0)
+		return NULL;
+	return __find_aer_error(domain, dev->bus->number, dev->devfn);
+}
+
+/* inject_lock must be held before calling */
+static struct pci_ops *__find_pci_bus_ops(struct pci_bus *bus)
+{
+	struct pci_bus_ops *bus_ops;
+
+	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
+		if (bus_ops->bus == bus)
+			return bus_ops->ops;
+	}
+	return NULL;
+}
+
+static struct pci_bus_ops *pci_bus_ops_pop(void)
+{
+	unsigned long flags;
+	struct pci_bus_ops *bus_ops;
+
+	spin_lock_irqsave(&inject_lock, flags);
+	bus_ops = list_first_entry_or_null(&pci_bus_ops_list,
+					   struct pci_bus_ops, list);
+	if (bus_ops)
+		list_del(&bus_ops->list);
+	spin_unlock_irqrestore(&inject_lock, flags);
+	return bus_ops;
+}
+
+static u32 *find_pci_config_dword(struct aer_error *err, int where,
+				  int *prw1cs)
+{
+	int rw1cs = 0;
+	u32 *target = NULL;
+
+	if (err->pos_cap_err == -1)
+		return NULL;
+
+	switch (where - err->pos_cap_err) {
+	case PCI_ERR_UNCOR_STATUS:
+		target = &err->uncor_status;
+		rw1cs = 1;
+		break;
+	case PCI_ERR_COR_STATUS:
+		target = &err->cor_status;
+		rw1cs = 1;
+		break;
+	case PCI_ERR_HEADER_LOG:
+		target = &err->header_log0;
+		break;
+	case PCI_ERR_HEADER_LOG+4:
+		target = &err->header_log1;
+		break;
+	case PCI_ERR_HEADER_LOG+8:
+		target = &err->header_log2;
+		break;
+	case PCI_ERR_HEADER_LOG+12:
+		target = &err->header_log3;
+		break;
+	case PCI_ERR_ROOT_STATUS:
+		target = &err->root_status;
+		rw1cs = 1;
+		break;
+	case PCI_ERR_ROOT_ERR_SRC:
+		target = &err->source_id;
+		break;
+	}
+	if (prw1cs)
+		*prw1cs = rw1cs;
+	return target;
+}
+
+static int aer_inj_read(struct pci_bus *bus, unsigned int devfn, int where,
+			int size, u32 *val)
+{
+	struct pci_ops *ops, *my_ops;
+	int rv;
+
+	ops = __find_pci_bus_ops(bus);
+	if (!ops)
+		return -1;
+
+	my_ops = bus->ops;
+	bus->ops = ops;
+	rv = ops->read(bus, devfn, where, size, val);
+	bus->ops = my_ops;
+
+	return rv;
+}
+
+static int aer_inj_write(struct pci_bus *bus, unsigned int devfn, int where,
+			 int size, u32 val)
+{
+	struct pci_ops *ops, *my_ops;
+	int rv;
+
+	ops = __find_pci_bus_ops(bus);
+	if (!ops)
+		return -1;
+
+	my_ops = bus->ops;
+	bus->ops = ops;
+	rv = ops->write(bus, devfn, where, size, val);
+	bus->ops = my_ops;
+
+	return rv;
+}
+
+static int aer_inj_read_config(struct pci_bus *bus, unsigned int devfn,
+			       int where, int size, u32 *val)
+{
+	u32 *sim;
+	struct aer_error *err;
+	unsigned long flags;
+	int domain;
+	int rv;
+
+	spin_lock_irqsave(&inject_lock, flags);
+	if (size != sizeof(u32))
+		goto out;
+	domain = pci_domain_nr(bus);
+	if (domain < 0)
+		goto out;
+	err = __find_aer_error(domain, bus->number, devfn);
+	if (!err)
+		goto out;
+
+	sim = find_pci_config_dword(err, where, NULL);
+	if (sim) {
+		*val = *sim;
+		spin_unlock_irqrestore(&inject_lock, flags);
+		return 0;
+	}
+out:
+	rv = aer_inj_read(bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&inject_lock, flags);
+	return rv;
+}
+
+static int aer_inj_write_config(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 val)
+{
+	u32 *sim;
+	struct aer_error *err;
+	unsigned long flags;
+	int rw1cs;
+	int domain;
+	int rv;
+
+	spin_lock_irqsave(&inject_lock, flags);
+	if (size != sizeof(u32))
+		goto out;
+	domain = pci_domain_nr(bus);
+	if (domain < 0)
+		goto out;
+	err = __find_aer_error(domain, bus->number, devfn);
+	if (!err)
+		goto out;
+
+	sim = find_pci_config_dword(err, where, &rw1cs);
+	if (sim) {
+		if (rw1cs)
+			*sim ^= val;
+		else
+			*sim = val;
+		spin_unlock_irqrestore(&inject_lock, flags);
+		return 0;
+	}
+out:
+	rv = aer_inj_write(bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&inject_lock, flags);
+	return rv;
+}
+
+static struct pci_ops aer_inj_pci_ops = {
+	.read = aer_inj_read_config,
+	.write = aer_inj_write_config,
+};
+
+static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
+			     struct pci_bus *bus,
+			     struct pci_ops *ops)
+{
+	INIT_LIST_HEAD(&bus_ops->list);
+	bus_ops->bus = bus;
+	bus_ops->ops = ops;
+}
+
+static int pci_bus_set_aer_ops(struct pci_bus *bus)
+{
+	struct pci_ops *ops;
+	struct pci_bus_ops *bus_ops;
+	unsigned long flags;
+
+	bus_ops = kmalloc(sizeof(*bus_ops), GFP_KERNEL);
+	if (!bus_ops)
+		return -ENOMEM;
+	ops = pci_bus_set_ops(bus, &aer_inj_pci_ops);
+	spin_lock_irqsave(&inject_lock, flags);
+	if (ops == &aer_inj_pci_ops)
+		goto out;
+	pci_bus_ops_init(bus_ops, bus, ops);
+	list_add(&bus_ops->list, &pci_bus_ops_list);
+	bus_ops = NULL;
+out:
+	spin_unlock_irqrestore(&inject_lock, flags);
+	kfree(bus_ops);
+	return 0;
+}
+
+static int aer_inject(struct aer_error_inj *einj)
+{
+	struct aer_error *err, *rperr;
+	struct aer_error *err_alloc = NULL, *rperr_alloc = NULL;
+	struct pci_dev *dev, *rpdev;
+	struct pcie_device *edev;
+	struct device *device;
+	unsigned long flags;
+	unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
+	int pos_cap_err, rp_pos_cap_err;
+	u32 sever, cor_mask, uncor_mask, cor_mask_orig = 0, uncor_mask_orig = 0;
+	int ret = 0;
+
+	dev = pci_get_domain_bus_and_slot(einj->domain, einj->bus, devfn);
+	if (!dev)
+		return -ENODEV;
+	rpdev = pcie_find_root_port(dev);
+	/* If Root Port not found, try to find an RCEC */
+	if (!rpdev)
+		rpdev = dev->rcec;
+	if (!rpdev) {
+		pci_err(dev, "Neither Root Port nor RCEC found\n");
+		ret = -ENODEV;
+		goto out_put;
+	}
+
+	pos_cap_err = dev->aer_cap;
+	if (!pos_cap_err) {
+		pci_err(dev, "Device doesn't support AER\n");
+		ret = -EPROTONOSUPPORT;
+		goto out_put;
+	}
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask);
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+			      &uncor_mask);
+
+	rp_pos_cap_err = rpdev->aer_cap;
+	if (!rp_pos_cap_err) {
+		pci_err(rpdev, "Root port doesn't support AER\n");
+		ret = -EPROTONOSUPPORT;
+		goto out_put;
+	}
+
+	err_alloc =  kzalloc(sizeof(struct aer_error), GFP_KERNEL);
+	if (!err_alloc) {
+		ret = -ENOMEM;
+		goto out_put;
+	}
+	rperr_alloc =  kzalloc(sizeof(struct aer_error), GFP_KERNEL);
+	if (!rperr_alloc) {
+		ret = -ENOMEM;
+		goto out_put;
+	}
+
+	if (aer_mask_override) {
+		cor_mask_orig = cor_mask;
+		cor_mask &= !(einj->cor_status);
+		pci_write_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK,
+				       cor_mask);
+
+		uncor_mask_orig = uncor_mask;
+		uncor_mask &= !(einj->uncor_status);
+		pci_write_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+				       uncor_mask);
+	}
+
+	spin_lock_irqsave(&inject_lock, flags);
+
+	err = __find_aer_error_by_dev(dev);
+	if (!err) {
+		err = err_alloc;
+		err_alloc = NULL;
+		aer_error_init(err, einj->domain, einj->bus, devfn,
+			       pos_cap_err);
+		list_add(&err->list, &einjected);
+	}
+	err->uncor_status |= einj->uncor_status;
+	err->cor_status |= einj->cor_status;
+	err->header_log0 = einj->header_log0;
+	err->header_log1 = einj->header_log1;
+	err->header_log2 = einj->header_log2;
+	err->header_log3 = einj->header_log3;
+
+	if (!aer_mask_override && einj->cor_status &&
+	    !(einj->cor_status & ~cor_mask)) {
+		ret = -EINVAL;
+		pci_warn(dev, "The correctable error(s) is masked by device\n");
+		spin_unlock_irqrestore(&inject_lock, flags);
+		goto out_put;
+	}
+	if (!aer_mask_override && einj->uncor_status &&
+	    !(einj->uncor_status & ~uncor_mask)) {
+		ret = -EINVAL;
+		pci_warn(dev, "The uncorrectable error(s) is masked by device\n");
+		spin_unlock_irqrestore(&inject_lock, flags);
+		goto out_put;
+	}
+
+	rperr = __find_aer_error_by_dev(rpdev);
+	if (!rperr) {
+		rperr = rperr_alloc;
+		rperr_alloc = NULL;
+		aer_error_init(rperr, pci_domain_nr(rpdev->bus),
+			       rpdev->bus->number, rpdev->devfn,
+			       rp_pos_cap_err);
+		list_add(&rperr->list, &einjected);
+	}
+	if (einj->cor_status) {
+		if (rperr->root_status & PCI_ERR_ROOT_COR_RCV)
+			rperr->root_status |= PCI_ERR_ROOT_MULTI_COR_RCV;
+		else
+			rperr->root_status |= PCI_ERR_ROOT_COR_RCV;
+		rperr->source_id &= 0xffff0000;
+		rperr->source_id |= (einj->bus << 8) | devfn;
+	}
+	if (einj->uncor_status) {
+		if (rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV)
+			rperr->root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV;
+		if (sever & einj->uncor_status) {
+			rperr->root_status |= PCI_ERR_ROOT_FATAL_RCV;
+			if (!(rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV))
+				rperr->root_status |= PCI_ERR_ROOT_FIRST_FATAL;
+		} else
+			rperr->root_status |= PCI_ERR_ROOT_NONFATAL_RCV;
+		rperr->root_status |= PCI_ERR_ROOT_UNCOR_RCV;
+		rperr->source_id &= 0x0000ffff;
+		rperr->source_id |= ((einj->bus << 8) | devfn) << 16;
+	}
+	spin_unlock_irqrestore(&inject_lock, flags);
+
+	if (aer_mask_override) {
+		pci_write_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK,
+				       cor_mask_orig);
+		pci_write_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+				       uncor_mask_orig);
+	}
+
+	ret = pci_bus_set_aer_ops(dev->bus);
+	if (ret)
+		goto out_put;
+	ret = pci_bus_set_aer_ops(rpdev->bus);
+	if (ret)
+		goto out_put;
+
+	device = pcie_port_find_device(rpdev, PCIE_PORT_SERVICE_AER);
+	if (device) {
+		edev = to_pcie_device(device);
+		if (!get_service_data(edev)) {
+			pci_warn(edev->port, "AER service is not initialized\n");
+			ret = -EPROTONOSUPPORT;
+			goto out_put;
+		}
+		pci_info(edev->port, "Injecting errors %08x/%08x into device %s\n",
+			 einj->cor_status, einj->uncor_status, pci_name(dev));
+		ret = irq_inject_interrupt(edev->irq);
+	} else {
+		pci_err(rpdev, "AER device not found\n");
+		ret = -ENODEV;
+	}
+out_put:
+	kfree(err_alloc);
+	kfree(rperr_alloc);
+	pci_dev_put(dev);
+	return ret;
+}
+
+static ssize_t aer_inject_write(struct file *filp, const char __user *ubuf,
+				size_t usize, loff_t *off)
+{
+	struct aer_error_inj einj;
+	int ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (usize < offsetof(struct aer_error_inj, domain) ||
+	    usize > sizeof(einj))
+		return -EINVAL;
+
+	memset(&einj, 0, sizeof(einj));
+	if (copy_from_user(&einj, ubuf, usize))
+		return -EFAULT;
+
+	ret = aer_inject(&einj);
+	return ret ? ret : usize;
+}
+
+static const struct file_operations aer_inject_fops = {
+	.write = aer_inject_write,
+	.owner = THIS_MODULE,
+	.llseek = noop_llseek,
+};
+
+static struct miscdevice aer_inject_device = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "aer_inject",
+	.fops = &aer_inject_fops,
+};
+
+static int __init aer_inject_init(void)
+{
+	return misc_register(&aer_inject_device);
+}
+
+static void __exit aer_inject_exit(void)
+{
+	struct aer_error *err, *err_next;
+	unsigned long flags;
+	struct pci_bus_ops *bus_ops;
+
+	misc_deregister(&aer_inject_device);
+
+	while ((bus_ops = pci_bus_ops_pop())) {
+		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
+		kfree(bus_ops);
+	}
+
+	spin_lock_irqsave(&inject_lock, flags);
+	list_for_each_entry_safe(err, err_next, &einjected, list) {
+		list_del(&err->list);
+		kfree(err);
+	}
+	spin_unlock_irqrestore(&inject_lock, flags);
+}
+
+module_init(aer_inject_init);
+module_exit(aer_inject_exit);
+
+MODULE_DESCRIPTION("PCIe AER software error injector");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
new file mode 100644
index 000000000..25736d408
--- /dev/null
+++ b/drivers/pci/pcie/aspm.c
@@ -0,0 +1,1413 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Enable PCIe link L0s/L1 state and Clock Power Management
+ *
+ * Copyright (C) 2007 Intel
+ * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
+ * Copyright (C) Shaohua Li (shaohua.li@intel.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include "../pci.h"
+
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "pcie_aspm."
+
+/* Note: those are not register definitions */
+#define ASPM_STATE_L0S_UP	(1)	/* Upstream direction L0s state */
+#define ASPM_STATE_L0S_DW	(2)	/* Downstream direction L0s state */
+#define ASPM_STATE_L1		(4)	/* L1 state */
+#define ASPM_STATE_L1_1		(8)	/* ASPM L1.1 state */
+#define ASPM_STATE_L1_2		(0x10)	/* ASPM L1.2 state */
+#define ASPM_STATE_L1_1_PCIPM	(0x20)	/* PCI PM L1.1 state */
+#define ASPM_STATE_L1_2_PCIPM	(0x40)	/* PCI PM L1.2 state */
+#define ASPM_STATE_L1_SS_PCIPM	(ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
+#define ASPM_STATE_L1_2_MASK	(ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
+#define ASPM_STATE_L1SS		(ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
+				 ASPM_STATE_L1_2_MASK)
+#define ASPM_STATE_L0S		(ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
+#define ASPM_STATE_ALL		(ASPM_STATE_L0S | ASPM_STATE_L1 |	\
+				 ASPM_STATE_L1SS)
+
+struct pcie_link_state {
+	struct pci_dev *pdev;		/* Upstream component of the Link */
+	struct pci_dev *downstream;	/* Downstream component, function 0 */
+	struct pcie_link_state *root;	/* pointer to the root port link */
+	struct pcie_link_state *parent;	/* pointer to the parent Link state */
+	struct list_head sibling;	/* node in link_list */
+
+	/* ASPM state */
+	u32 aspm_support:7;		/* Supported ASPM state */
+	u32 aspm_enabled:7;		/* Enabled ASPM state */
+	u32 aspm_capable:7;		/* Capable ASPM state with latency */
+	u32 aspm_default:7;		/* Default ASPM state by BIOS */
+	u32 aspm_disable:7;		/* Disabled ASPM state */
+
+	/* Clock PM state */
+	u32 clkpm_capable:1;		/* Clock PM capable? */
+	u32 clkpm_enabled:1;		/* Current Clock PM state */
+	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
+	u32 clkpm_disable:1;		/* Clock PM disabled */
+};
+
+static int aspm_disabled, aspm_force;
+static bool aspm_support_enabled = true;
+static DEFINE_MUTEX(aspm_lock);
+static LIST_HEAD(link_list);
+
+#define POLICY_DEFAULT 0	/* BIOS default setting */
+#define POLICY_PERFORMANCE 1	/* high performance */
+#define POLICY_POWERSAVE 2	/* high power saving */
+#define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
+
+#ifdef CONFIG_PCIEASPM_PERFORMANCE
+static int aspm_policy = POLICY_PERFORMANCE;
+#elif defined CONFIG_PCIEASPM_POWERSAVE
+static int aspm_policy = POLICY_POWERSAVE;
+#elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
+static int aspm_policy = POLICY_POWER_SUPERSAVE;
+#else
+static int aspm_policy;
+#endif
+
+static const char *policy_str[] = {
+	[POLICY_DEFAULT] = "default",
+	[POLICY_PERFORMANCE] = "performance",
+	[POLICY_POWERSAVE] = "powersave",
+	[POLICY_POWER_SUPERSAVE] = "powersupersave"
+};
+
+#define LINK_RETRAIN_TIMEOUT HZ
+
+/*
+ * The L1 PM substate capability is only implemented in function 0 in a
+ * multi function device.
+ */
+static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
+{
+	struct pci_dev *child;
+
+	list_for_each_entry(child, &linkbus->devices, bus_list)
+		if (PCI_FUNC(child->devfn) == 0)
+			return child;
+	return NULL;
+}
+
+static int policy_to_aspm_state(struct pcie_link_state *link)
+{
+	switch (aspm_policy) {
+	case POLICY_PERFORMANCE:
+		/* Disable ASPM and Clock PM */
+		return 0;
+	case POLICY_POWERSAVE:
+		/* Enable ASPM L0s/L1 */
+		return (ASPM_STATE_L0S | ASPM_STATE_L1);
+	case POLICY_POWER_SUPERSAVE:
+		/* Enable Everything */
+		return ASPM_STATE_ALL;
+	case POLICY_DEFAULT:
+		return link->aspm_default;
+	}
+	return 0;
+}
+
+static int policy_to_clkpm_state(struct pcie_link_state *link)
+{
+	switch (aspm_policy) {
+	case POLICY_PERFORMANCE:
+		/* Disable ASPM and Clock PM */
+		return 0;
+	case POLICY_POWERSAVE:
+	case POLICY_POWER_SUPERSAVE:
+		/* Enable Clock PM */
+		return 1;
+	case POLICY_DEFAULT:
+		return link->clkpm_default;
+	}
+	return 0;
+}
+
+static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
+{
+	struct pci_dev *child;
+	struct pci_bus *linkbus = link->pdev->subordinate;
+	u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0;
+
+	list_for_each_entry(child, &linkbus->devices, bus_list)
+		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_CLKREQ_EN,
+						   val);
+	link->clkpm_enabled = !!enable;
+}
+
+static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
+{
+	/*
+	 * Don't enable Clock PM if the link is not Clock PM capable
+	 * or Clock PM is disabled
+	 */
+	if (!link->clkpm_capable || link->clkpm_disable)
+		enable = 0;
+	/* Need nothing if the specified equals to current state */
+	if (link->clkpm_enabled == enable)
+		return;
+	pcie_set_clkpm_nocheck(link, enable);
+}
+
+static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
+{
+	int capable = 1, enabled = 1;
+	u32 reg32;
+	u16 reg16;
+	struct pci_dev *child;
+	struct pci_bus *linkbus = link->pdev->subordinate;
+
+	/* All functions should have the same cap and state, take the worst */
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &reg32);
+		if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
+			capable = 0;
+			enabled = 0;
+			break;
+		}
+		pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
+		if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
+			enabled = 0;
+	}
+	link->clkpm_enabled = enabled;
+	link->clkpm_default = enabled;
+	link->clkpm_capable = capable;
+	link->clkpm_disable = blacklist ? 1 : 0;
+}
+
+static int pcie_wait_for_retrain(struct pci_dev *pdev)
+{
+	unsigned long end_jiffies;
+	u16 reg16;
+
+	/* Wait for Link Training to be cleared by hardware */
+	end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT;
+	do {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &reg16);
+		if (!(reg16 & PCI_EXP_LNKSTA_LT))
+			return 0;
+		msleep(1);
+	} while (time_before(jiffies, end_jiffies));
+
+	return -ETIMEDOUT;
+}
+
+static int pcie_retrain_link(struct pcie_link_state *link)
+{
+	struct pci_dev *parent = link->pdev;
+	int rc;
+	u16 reg16;
+
+	/*
+	 * Ensure the updated LNKCTL parameters are used during link
+	 * training by checking that there is no ongoing link training to
+	 * avoid LTSSM race as recommended in Implementation Note at the
+	 * end of PCIe r6.0.1 sec 7.5.3.7.
+	 */
+	rc = pcie_wait_for_retrain(parent);
+	if (rc)
+		return rc;
+
+	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
+	reg16 |= PCI_EXP_LNKCTL_RL;
+	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+	if (parent->clear_retrain_link) {
+		/*
+		 * Due to an erratum in some devices the Retrain Link bit
+		 * needs to be cleared again manually to allow the link
+		 * training to succeed.
+		 */
+		reg16 &= ~PCI_EXP_LNKCTL_RL;
+		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+	}
+
+	return pcie_wait_for_retrain(parent);
+}
+
+/*
+ * pcie_aspm_configure_common_clock: check if the 2 ends of a link
+ *   could use common clock. If they are, configure them to use the
+ *   common clock. That will reduce the ASPM state exit latency.
+ */
+static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
+{
+	int same_clock = 1;
+	u16 reg16, ccc, parent_old_ccc, child_old_ccc[8];
+	struct pci_dev *child, *parent = link->pdev;
+	struct pci_bus *linkbus = parent->subordinate;
+	/*
+	 * All functions of a slot should have the same Slot Clock
+	 * Configuration, so just check one function
+	 */
+	child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+	BUG_ON(!pci_is_pcie(child));
+
+	/* Check downstream component if bit Slot Clock Configuration is 1 */
+	pcie_capability_read_word(child, PCI_EXP_LNKSTA, &reg16);
+	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
+		same_clock = 0;
+
+	/* Check upstream component if bit Slot Clock Configuration is 1 */
+	pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
+	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
+		same_clock = 0;
+
+	/* Port might be already in common clock mode */
+	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
+	parent_old_ccc = reg16 & PCI_EXP_LNKCTL_CCC;
+	if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) {
+		bool consistent = true;
+
+		list_for_each_entry(child, &linkbus->devices, bus_list) {
+			pcie_capability_read_word(child, PCI_EXP_LNKCTL,
+						  &reg16);
+			if (!(reg16 & PCI_EXP_LNKCTL_CCC)) {
+				consistent = false;
+				break;
+			}
+		}
+		if (consistent)
+			return;
+		pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n");
+	}
+
+	ccc = same_clock ? PCI_EXP_LNKCTL_CCC : 0;
+	/* Configure downstream component, all functions */
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
+		child_old_ccc[PCI_FUNC(child->devfn)] = reg16 & PCI_EXP_LNKCTL_CCC;
+		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_CCC, ccc);
+	}
+
+	/* Configure upstream component */
+	pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
+					   PCI_EXP_LNKCTL_CCC, ccc);
+
+	if (pcie_retrain_link(link)) {
+
+		/* Training failed. Restore common clock configurations */
+		pci_err(parent, "ASPM: Could not configure common clock\n");
+		list_for_each_entry(child, &linkbus->devices, bus_list)
+			pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
+							   PCI_EXP_LNKCTL_CCC,
+							   child_old_ccc[PCI_FUNC(child->devfn)]);
+		pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_CCC, parent_old_ccc);
+	}
+}
+
+/* Convert L0s latency encoding to ns */
+static u32 calc_l0s_latency(u32 lnkcap)
+{
+	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12;
+
+	if (encoding == 0x7)
+		return (5 * 1000);	/* > 4us */
+	return (64 << encoding);
+}
+
+/* Convert L0s acceptable latency encoding to ns */
+static u32 calc_l0s_acceptable(u32 encoding)
+{
+	if (encoding == 0x7)
+		return -1U;
+	return (64 << encoding);
+}
+
+/* Convert L1 latency encoding to ns */
+static u32 calc_l1_latency(u32 lnkcap)
+{
+	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15;
+
+	if (encoding == 0x7)
+		return (65 * 1000);	/* > 64us */
+	return (1000 << encoding);
+}
+
+/* Convert L1 acceptable latency encoding to ns */
+static u32 calc_l1_acceptable(u32 encoding)
+{
+	if (encoding == 0x7)
+		return -1U;
+	return (1000 << encoding);
+}
+
+/* Convert L1SS T_pwr encoding to usec */
+static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val)
+{
+	switch (scale) {
+	case 0:
+		return val * 2;
+	case 1:
+		return val * 10;
+	case 2:
+		return val * 100;
+	}
+	pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale);
+	return 0;
+}
+
+/*
+ * Encode an LTR_L1.2_THRESHOLD value for the L1 PM Substates Control 1
+ * register.  Ports enter L1.2 when the most recent LTR value is greater
+ * than or equal to LTR_L1.2_THRESHOLD, so we round up to make sure we
+ * don't enter L1.2 too aggressively.
+ *
+ * See PCIe r6.0, sec 5.5.1, 6.18, 7.8.3.3.
+ */
+static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
+{
+	u64 threshold_ns = (u64) threshold_us * 1000;
+
+	/*
+	 * LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max
+	 * value of 0x3ff.
+	 */
+	if (threshold_ns <= 0x3ff * 1) {
+		*scale = 0;		/* Value times 1ns */
+		*value = threshold_ns;
+	} else if (threshold_ns <= 0x3ff * 32) {
+		*scale = 1;		/* Value times 32ns */
+		*value = roundup(threshold_ns, 32) / 32;
+	} else if (threshold_ns <= 0x3ff * 1024) {
+		*scale = 2;		/* Value times 1024ns */
+		*value = roundup(threshold_ns, 1024) / 1024;
+	} else if (threshold_ns <= 0x3ff * 32768) {
+		*scale = 3;		/* Value times 32768ns */
+		*value = roundup(threshold_ns, 32768) / 32768;
+	} else if (threshold_ns <= 0x3ff * 1048576) {
+		*scale = 4;		/* Value times 1048576ns */
+		*value = roundup(threshold_ns, 1048576) / 1048576;
+	} else if (threshold_ns <= 0x3ff * (u64) 33554432) {
+		*scale = 5;		/* Value times 33554432ns */
+		*value = roundup(threshold_ns, 33554432) / 33554432;
+	} else {
+		*scale = 5;
+		*value = 0x3ff;		/* Max representable value */
+	}
+}
+
+static void pcie_aspm_check_latency(struct pci_dev *endpoint)
+{
+	u32 latency, encoding, lnkcap_up, lnkcap_dw;
+	u32 l1_switch_latency = 0, latency_up_l0s;
+	u32 latency_up_l1, latency_dw_l0s, latency_dw_l1;
+	u32 acceptable_l0s, acceptable_l1;
+	struct pcie_link_state *link;
+
+	/* Device not in D0 doesn't need latency check */
+	if ((endpoint->current_state != PCI_D0) &&
+	    (endpoint->current_state != PCI_UNKNOWN))
+		return;
+
+	link = endpoint->bus->self->link_state;
+
+	/* Calculate endpoint L0s acceptable latency */
+	encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L0S) >> 6;
+	acceptable_l0s = calc_l0s_acceptable(encoding);
+
+	/* Calculate endpoint L1 acceptable latency */
+	encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L1) >> 9;
+	acceptable_l1 = calc_l1_acceptable(encoding);
+
+	while (link) {
+		struct pci_dev *dev = pci_function_0(link->pdev->subordinate);
+
+		/* Read direction exit latencies */
+		pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP,
+					   &lnkcap_up);
+		pcie_capability_read_dword(dev, PCI_EXP_LNKCAP,
+					   &lnkcap_dw);
+		latency_up_l0s = calc_l0s_latency(lnkcap_up);
+		latency_up_l1 = calc_l1_latency(lnkcap_up);
+		latency_dw_l0s = calc_l0s_latency(lnkcap_dw);
+		latency_dw_l1 = calc_l1_latency(lnkcap_dw);
+
+		/* Check upstream direction L0s latency */
+		if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
+		    (latency_up_l0s > acceptable_l0s))
+			link->aspm_capable &= ~ASPM_STATE_L0S_UP;
+
+		/* Check downstream direction L0s latency */
+		if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
+		    (latency_dw_l0s > acceptable_l0s))
+			link->aspm_capable &= ~ASPM_STATE_L0S_DW;
+		/*
+		 * Check L1 latency.
+		 * Every switch on the path to root complex need 1
+		 * more microsecond for L1. Spec doesn't mention L0s.
+		 *
+		 * The exit latencies for L1 substates are not advertised
+		 * by a device.  Since the spec also doesn't mention a way
+		 * to determine max latencies introduced by enabling L1
+		 * substates on the components, it is not clear how to do
+		 * a L1 substate exit latency check.  We assume that the
+		 * L1 exit latencies advertised by a device include L1
+		 * substate latencies (and hence do not do any check).
+		 */
+		latency = max_t(u32, latency_up_l1, latency_dw_l1);
+		if ((link->aspm_capable & ASPM_STATE_L1) &&
+		    (latency + l1_switch_latency > acceptable_l1))
+			link->aspm_capable &= ~ASPM_STATE_L1;
+		l1_switch_latency += 1000;
+
+		link = link->parent;
+	}
+}
+
+static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
+				    u32 clear, u32 set)
+{
+	u32 val;
+
+	pci_read_config_dword(pdev, pos, &val);
+	val &= ~clear;
+	val |= set;
+	pci_write_config_dword(pdev, pos, val);
+}
+
+/* Calculate L1.2 PM substate timing parameters */
+static void aspm_calc_l1ss_info(struct pcie_link_state *link,
+				u32 parent_l1ss_cap, u32 child_l1ss_cap)
+{
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
+	u32 val1, val2, scale1, scale2;
+	u32 t_common_mode, t_power_on, l1_2_threshold, scale, value;
+	u32 ctl1 = 0, ctl2 = 0;
+	u32 pctl1, pctl2, cctl1, cctl2;
+	u32 pl1_2_enables, cl1_2_enables;
+
+	if (!(link->aspm_support & ASPM_STATE_L1_2_MASK))
+		return;
+
+	/* Choose the greater of the two Port Common_Mode_Restore_Times */
+	val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
+	val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
+	t_common_mode = max(val1, val2);
+
+	/* Choose the greater of the two Port T_POWER_ON times */
+	val1   = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
+	scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
+	val2   = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
+	scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
+
+	if (calc_l1ss_pwron(parent, scale1, val1) >
+	    calc_l1ss_pwron(child, scale2, val2)) {
+		ctl2 |= scale1 | (val1 << 3);
+		t_power_on = calc_l1ss_pwron(parent, scale1, val1);
+	} else {
+		ctl2 |= scale2 | (val2 << 3);
+		t_power_on = calc_l1ss_pwron(child, scale2, val2);
+	}
+
+	/*
+	 * Set LTR_L1.2_THRESHOLD to the time required to transition the
+	 * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if
+	 * downstream devices report (via LTR) that they can tolerate at
+	 * least that much latency.
+	 *
+	 * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and
+	 * Table 5-11.  T(POWER_OFF) is at most 2us and T(L1.2) is at
+	 * least 4us.
+	 */
+	l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
+	encode_l12_threshold(l1_2_threshold, &scale, &value);
+	ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
+
+	/* Some broken devices only support dword access to L1 SS */
+	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
+	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2);
+	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1);
+	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2);
+
+	if (ctl1 == pctl1 && ctl1 == cctl1 &&
+	    ctl2 == pctl2 && ctl2 == cctl2)
+		return;
+
+	/* Disable L1.2 while updating.  See PCIe r5.0, sec 5.5.4, 7.8.3.3 */
+	pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK;
+	cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK;
+
+	if (pl1_2_enables || cl1_2_enables) {
+		pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
+					PCI_L1SS_CTL1_L1_2_MASK, 0);
+		pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
+					PCI_L1SS_CTL1_L1_2_MASK, 0);
+	}
+
+	/* Program T_POWER_ON times in both ports */
+	pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2);
+	pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2);
+
+	/* Program Common_Mode_Restore_Time in upstream device */
+	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1);
+
+	/* Program LTR_L1.2_THRESHOLD time in both ports */
+	pci_clear_and_set_dword(parent,	parent->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
+				PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
+	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
+				PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
+
+	if (pl1_2_enables || cl1_2_enables) {
+		pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0,
+					pl1_2_enables);
+		pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 0,
+					cl1_2_enables);
+	}
+}
+
+static void aspm_l1ss_init(struct pcie_link_state *link)
+{
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
+	u32 parent_l1ss_cap, child_l1ss_cap;
+	u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0;
+
+	if (!parent->l1ss || !child->l1ss)
+		return;
+
+	/* Setup L1 substate */
+	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP,
+			      &parent_l1ss_cap);
+	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP,
+			      &child_l1ss_cap);
+
+	if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
+		parent_l1ss_cap = 0;
+	if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
+		child_l1ss_cap = 0;
+
+	/*
+	 * If we don't have LTR for the entire path from the Root Complex
+	 * to this device, we can't use ASPM L1.2 because it relies on the
+	 * LTR_L1.2_THRESHOLD.  See PCIe r4.0, secs 5.5.4, 6.18.
+	 */
+	if (!child->ltr_path)
+		child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2;
+
+	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
+		link->aspm_support |= ASPM_STATE_L1_1;
+	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
+		link->aspm_support |= ASPM_STATE_L1_2;
+	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
+		link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
+	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
+		link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
+
+	if (parent_l1ss_cap)
+		pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
+				      &parent_l1ss_ctl1);
+	if (child_l1ss_cap)
+		pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1,
+				      &child_l1ss_ctl1);
+
+	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
+		link->aspm_enabled |= ASPM_STATE_L1_1;
+	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
+		link->aspm_enabled |= ASPM_STATE_L1_2;
+	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
+		link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
+	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
+		link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
+
+	if (link->aspm_support & ASPM_STATE_L1SS)
+		aspm_calc_l1ss_info(link, parent_l1ss_cap, child_l1ss_cap);
+}
+
+static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
+{
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
+	u32 parent_lnkcap, child_lnkcap;
+	u16 parent_lnkctl, child_lnkctl;
+	struct pci_bus *linkbus = parent->subordinate;
+
+	if (blacklist) {
+		/* Set enabled/disable so that we will disable ASPM later */
+		link->aspm_enabled = ASPM_STATE_ALL;
+		link->aspm_disable = ASPM_STATE_ALL;
+		return;
+	}
+
+	/*
+	 * If ASPM not supported, don't mess with the clocks and link,
+	 * bail out now.
+	 */
+	pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
+	pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
+	if (!(parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPMS))
+		return;
+
+	/* Configure common clock before checking latencies */
+	pcie_aspm_configure_common_clock(link);
+
+	/*
+	 * Re-read upstream/downstream components' register state after
+	 * clock configuration.  L0s & L1 exit latencies in the otherwise
+	 * read-only Link Capabilities may change depending on common clock
+	 * configuration (PCIe r5.0, sec 7.5.3.6).
+	 */
+	pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
+	pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
+	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl);
+	pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl);
+
+	/*
+	 * Setup L0s state
+	 *
+	 * Note that we must not enable L0s in either direction on a
+	 * given link unless components on both sides of the link each
+	 * support L0s.
+	 */
+	if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)
+		link->aspm_support |= ASPM_STATE_L0S;
+
+	if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
+		link->aspm_enabled |= ASPM_STATE_L0S_UP;
+	if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
+		link->aspm_enabled |= ASPM_STATE_L0S_DW;
+
+	/* Setup L1 state */
+	if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1)
+		link->aspm_support |= ASPM_STATE_L1;
+
+	if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1)
+		link->aspm_enabled |= ASPM_STATE_L1;
+
+	aspm_l1ss_init(link);
+
+	/* Save default state */
+	link->aspm_default = link->aspm_enabled;
+
+	/* Setup initial capable state. Will be updated later */
+	link->aspm_capable = link->aspm_support;
+
+	/* Get and check endpoint acceptable latencies */
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
+		    pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
+			continue;
+
+		pcie_aspm_check_latency(child);
+	}
+}
+
+/* Configure the ASPM L1 substates */
+static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
+{
+	u32 val, enable_req;
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
+
+	enable_req = (link->aspm_enabled ^ state) & state;
+
+	/*
+	 * Here are the rules specified in the PCIe spec for enabling L1SS:
+	 * - When enabling L1.x, enable bit at parent first, then at child
+	 * - When disabling L1.x, disable bit at child first, then at parent
+	 * - When enabling ASPM L1.x, need to disable L1
+	 *   (at child followed by parent).
+	 * - The ASPM/PCIPM L1.2 must be disabled while programming timing
+	 *   parameters
+	 *
+	 * To keep it simple, disable all L1SS bits first, and later enable
+	 * what is needed.
+	 */
+
+	/* Disable all L1 substates */
+	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_L1SS_MASK, 0);
+	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_L1SS_MASK, 0);
+	/*
+	 * If needed, disable L1, and it gets enabled later
+	 * in pcie_config_aspm_link().
+	 */
+	if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
+		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_ASPM_L1, 0);
+		pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_ASPM_L1, 0);
+	}
+
+	val = 0;
+	if (state & ASPM_STATE_L1_1)
+		val |= PCI_L1SS_CTL1_ASPM_L1_1;
+	if (state & ASPM_STATE_L1_2)
+		val |= PCI_L1SS_CTL1_ASPM_L1_2;
+	if (state & ASPM_STATE_L1_1_PCIPM)
+		val |= PCI_L1SS_CTL1_PCIPM_L1_1;
+	if (state & ASPM_STATE_L1_2_PCIPM)
+		val |= PCI_L1SS_CTL1_PCIPM_L1_2;
+
+	/* Enable what we need to enable */
+	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_L1SS_MASK, val);
+	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_L1SS_MASK, val);
+}
+
+static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
+{
+	pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
+					   PCI_EXP_LNKCTL_ASPMC, val);
+}
+
+static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
+{
+	u32 upstream = 0, dwstream = 0;
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
+	struct pci_bus *linkbus = parent->subordinate;
+
+	/* Enable only the states that were not explicitly disabled */
+	state &= (link->aspm_capable & ~link->aspm_disable);
+
+	/* Can't enable any substates if L1 is not enabled */
+	if (!(state & ASPM_STATE_L1))
+		state &= ~ASPM_STATE_L1SS;
+
+	/* Spec says both ports must be in D0 before enabling PCI PM substates*/
+	if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
+		state &= ~ASPM_STATE_L1_SS_PCIPM;
+		state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
+	}
+
+	/* Nothing to do if the link is already in the requested state */
+	if (link->aspm_enabled == state)
+		return;
+	/* Convert ASPM state to upstream/downstream ASPM register state */
+	if (state & ASPM_STATE_L0S_UP)
+		dwstream |= PCI_EXP_LNKCTL_ASPM_L0S;
+	if (state & ASPM_STATE_L0S_DW)
+		upstream |= PCI_EXP_LNKCTL_ASPM_L0S;
+	if (state & ASPM_STATE_L1) {
+		upstream |= PCI_EXP_LNKCTL_ASPM_L1;
+		dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
+	}
+
+	if (link->aspm_capable & ASPM_STATE_L1SS)
+		pcie_config_aspm_l1ss(link, state);
+
+	/*
+	 * Spec 2.0 suggests all functions should be configured the
+	 * same setting for ASPM. Enabling ASPM L1 should be done in
+	 * upstream component first and then downstream, and vice
+	 * versa for disabling ASPM L1. Spec doesn't mention L0S.
+	 */
+	if (state & ASPM_STATE_L1)
+		pcie_config_aspm_dev(parent, upstream);
+	list_for_each_entry(child, &linkbus->devices, bus_list)
+		pcie_config_aspm_dev(child, dwstream);
+	if (!(state & ASPM_STATE_L1))
+		pcie_config_aspm_dev(parent, upstream);
+
+	link->aspm_enabled = state;
+}
+
+static void pcie_config_aspm_path(struct pcie_link_state *link)
+{
+	while (link) {
+		pcie_config_aspm_link(link, policy_to_aspm_state(link));
+		link = link->parent;
+	}
+}
+
+static void free_link_state(struct pcie_link_state *link)
+{
+	link->pdev->link_state = NULL;
+	kfree(link);
+}
+
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+	struct pci_dev *child;
+	u32 reg32;
+
+	/*
+	 * Some functions in a slot might not all be PCIe functions,
+	 * very strange. Disable ASPM for the whole slot
+	 */
+	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
+		if (!pci_is_pcie(child))
+			return -EINVAL;
+
+		/*
+		 * If ASPM is disabled then we're not going to change
+		 * the BIOS state. It's safe to continue even if it's a
+		 * pre-1.1 device
+		 */
+
+		if (aspm_disabled)
+			continue;
+
+		/*
+		 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
+		 * RBER bit to determine if a function is 1.1 version device
+		 */
+		pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
+		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
+			pci_info(child, "disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link;
+
+	link = kzalloc(sizeof(*link), GFP_KERNEL);
+	if (!link)
+		return NULL;
+
+	INIT_LIST_HEAD(&link->sibling);
+	link->pdev = pdev;
+	link->downstream = pci_function_0(pdev->subordinate);
+
+	/*
+	 * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe
+	 * hierarchies.  Note that some PCIe host implementations omit
+	 * the root ports entirely, in which case a downstream port on
+	 * a switch may become the root of the link state chain for all
+	 * its subordinate endpoints.
+	 */
+	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
+	    pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE ||
+	    !pdev->bus->parent->self) {
+		link->root = link;
+	} else {
+		struct pcie_link_state *parent;
+
+		parent = pdev->bus->parent->self->link_state;
+		if (!parent) {
+			kfree(link);
+			return NULL;
+		}
+
+		link->parent = parent;
+		link->root = link->parent->root;
+	}
+
+	list_add(&link->sibling, &link_list);
+	pdev->link_state = link;
+	return link;
+}
+
+static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev)
+{
+	struct pci_dev *child;
+
+	list_for_each_entry(child, &pdev->subordinate->devices, bus_list)
+		sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group);
+}
+
+/*
+ * pcie_aspm_init_link_state: Initiate PCI express link state.
+ * It is called after the pcie and its children devices are scanned.
+ * @pdev: the root port or switch downstream port
+ */
+void pcie_aspm_init_link_state(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link;
+	int blacklist = !!pcie_aspm_sanity_check(pdev);
+
+	if (!aspm_support_enabled)
+		return;
+
+	if (pdev->link_state)
+		return;
+
+	/*
+	 * We allocate pcie_link_state for the component on the upstream
+	 * end of a Link, so there's nothing to do unless this device is
+	 * downstream port.
+	 */
+	if (!pcie_downstream_port(pdev))
+		return;
+
+	/* VIA has a strange chipset, root port is under a bridge */
+	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
+	    pdev->bus->self)
+		return;
+
+	down_read(&pci_bus_sem);
+	if (list_empty(&pdev->subordinate->devices))
+		goto out;
+
+	mutex_lock(&aspm_lock);
+	link = alloc_pcie_link_state(pdev);
+	if (!link)
+		goto unlock;
+	/*
+	 * Setup initial ASPM state. Note that we need to configure
+	 * upstream links also because capable state of them can be
+	 * update through pcie_aspm_cap_init().
+	 */
+	pcie_aspm_cap_init(link, blacklist);
+
+	/* Setup initial Clock PM state */
+	pcie_clkpm_cap_init(link, blacklist);
+
+	/*
+	 * At this stage drivers haven't had an opportunity to change the
+	 * link policy setting. Enabling ASPM on broken hardware can cripple
+	 * it even before the driver has had a chance to disable ASPM, so
+	 * default to a safe level right now. If we're enabling ASPM beyond
+	 * the BIOS's expectation, we'll do so once pci_enable_device() is
+	 * called.
+	 */
+	if (aspm_policy != POLICY_POWERSAVE &&
+	    aspm_policy != POLICY_POWER_SUPERSAVE) {
+		pcie_config_aspm_path(link);
+		pcie_set_clkpm(link, policy_to_clkpm_state(link));
+	}
+
+	pcie_aspm_update_sysfs_visibility(pdev);
+
+unlock:
+	mutex_unlock(&aspm_lock);
+out:
+	up_read(&pci_bus_sem);
+}
+
+/* Recheck latencies and update aspm_capable for links under the root */
+static void pcie_update_aspm_capable(struct pcie_link_state *root)
+{
+	struct pcie_link_state *link;
+	BUG_ON(root->parent);
+	list_for_each_entry(link, &link_list, sibling) {
+		if (link->root != root)
+			continue;
+		link->aspm_capable = link->aspm_support;
+	}
+	list_for_each_entry(link, &link_list, sibling) {
+		struct pci_dev *child;
+		struct pci_bus *linkbus = link->pdev->subordinate;
+		if (link->root != root)
+			continue;
+		list_for_each_entry(child, &linkbus->devices, bus_list) {
+			if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) &&
+			    (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END))
+				continue;
+			pcie_aspm_check_latency(child);
+		}
+	}
+}
+
+/* @pdev: the endpoint device */
+void pcie_aspm_exit_link_state(struct pci_dev *pdev)
+{
+	struct pci_dev *parent = pdev->bus->self;
+	struct pcie_link_state *link, *root, *parent_link;
+
+	if (!parent || !parent->link_state)
+		return;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+
+	link = parent->link_state;
+	root = link->root;
+	parent_link = link->parent;
+
+	/*
+	 * link->downstream is a pointer to the pci_dev of function 0.  If
+	 * we remove that function, the pci_dev is about to be deallocated,
+	 * so we can't use link->downstream again.  Free the link state to
+	 * avoid this.
+	 *
+	 * If we're removing a non-0 function, it's possible we could
+	 * retain the link state, but PCIe r6.0, sec 7.5.3.7, recommends
+	 * programming the same ASPM Control value for all functions of
+	 * multi-function devices, so disable ASPM for all of them.
+	 */
+	pcie_config_aspm_link(link, 0);
+	list_del(&link->sibling);
+	free_link_state(link);
+
+	/* Recheck latencies and configure upstream links */
+	if (parent_link) {
+		pcie_update_aspm_capable(root);
+		pcie_config_aspm_path(parent_link);
+	}
+
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+}
+
+/* @pdev: the root port or switch downstream port */
+void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link = pdev->link_state;
+
+	if (aspm_disabled || !link)
+		return;
+	/*
+	 * Devices changed PM state, we should recheck if latency
+	 * meets all functions' requirement
+	 */
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+	pcie_update_aspm_capable(link->root);
+	pcie_config_aspm_path(link);
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+}
+
+void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link = pdev->link_state;
+
+	if (aspm_disabled || !link)
+		return;
+
+	if (aspm_policy != POLICY_POWERSAVE &&
+	    aspm_policy != POLICY_POWER_SUPERSAVE)
+		return;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+	pcie_config_aspm_path(link);
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+}
+
+static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
+{
+	struct pci_dev *bridge;
+
+	if (!pci_is_pcie(pdev))
+		return NULL;
+
+	bridge = pci_upstream_bridge(pdev);
+	if (!bridge || !pci_is_pcie(bridge))
+		return NULL;
+
+	return bridge->link_state;
+}
+
+static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
+{
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+
+	if (!link)
+		return -EINVAL;
+	/*
+	 * A driver requested that ASPM be disabled on this device, but
+	 * if we don't have permission to manage ASPM (e.g., on ACPI
+	 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
+	 * the _OSC method), we can't honor that request.  Windows has
+	 * a similar mechanism using "PciASPMOptOut", which is also
+	 * ignored in this situation.
+	 */
+	if (aspm_disabled) {
+		pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n");
+		return -EPERM;
+	}
+
+	if (sem)
+		down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+	if (state & PCIE_LINK_STATE_L0S)
+		link->aspm_disable |= ASPM_STATE_L0S;
+	if (state & PCIE_LINK_STATE_L1)
+		/* L1 PM substates require L1 */
+		link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
+	if (state & PCIE_LINK_STATE_L1_1)
+		link->aspm_disable |= ASPM_STATE_L1_1;
+	if (state & PCIE_LINK_STATE_L1_2)
+		link->aspm_disable |= ASPM_STATE_L1_2;
+	if (state & PCIE_LINK_STATE_L1_1_PCIPM)
+		link->aspm_disable |= ASPM_STATE_L1_1_PCIPM;
+	if (state & PCIE_LINK_STATE_L1_2_PCIPM)
+		link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
+	pcie_config_aspm_link(link, policy_to_aspm_state(link));
+
+	if (state & PCIE_LINK_STATE_CLKPM)
+		link->clkpm_disable = 1;
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
+	mutex_unlock(&aspm_lock);
+	if (sem)
+		up_read(&pci_bus_sem);
+
+	return 0;
+}
+
+int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
+{
+	return __pci_disable_link_state(pdev, state, false);
+}
+EXPORT_SYMBOL(pci_disable_link_state_locked);
+
+/**
+ * pci_disable_link_state - Disable device's link state, so the link will
+ * never enter specific states.  Note that if the BIOS didn't grant ASPM
+ * control to the OS, this does nothing because we can't touch the LNKCTL
+ * register. Returns 0 or a negative errno.
+ *
+ * @pdev: PCI device
+ * @state: ASPM link state to disable
+ */
+int pci_disable_link_state(struct pci_dev *pdev, int state)
+{
+	return __pci_disable_link_state(pdev, state, true);
+}
+EXPORT_SYMBOL(pci_disable_link_state);
+
+static int pcie_aspm_set_policy(const char *val,
+				const struct kernel_param *kp)
+{
+	int i;
+	struct pcie_link_state *link;
+
+	if (aspm_disabled)
+		return -EPERM;
+	i = sysfs_match_string(policy_str, val);
+	if (i < 0)
+		return i;
+	if (i == aspm_policy)
+		return 0;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+	aspm_policy = i;
+	list_for_each_entry(link, &link_list, sibling) {
+		pcie_config_aspm_link(link, policy_to_aspm_state(link));
+		pcie_set_clkpm(link, policy_to_clkpm_state(link));
+	}
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+	return 0;
+}
+
+static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
+{
+	int i, cnt = 0;
+	for (i = 0; i < ARRAY_SIZE(policy_str); i++)
+		if (i == aspm_policy)
+			cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
+		else
+			cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
+	cnt += sprintf(buffer + cnt, "\n");
+	return cnt;
+}
+
+module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
+	NULL, 0644);
+
+/**
+ * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device.
+ * @pdev: Target device.
+ *
+ * Relies on the upstream bridge's link_state being valid.  The link_state
+ * is deallocated only when the last child of the bridge (i.e., @pdev or a
+ * sibling) is removed, and the caller should be holding a reference to
+ * @pdev, so this should be safe.
+ */
+bool pcie_aspm_enabled(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+
+	if (!link)
+		return false;
+
+	return link->aspm_enabled;
+}
+EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
+
+static ssize_t aspm_attr_show_common(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf, u8 state)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+
+	return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0);
+}
+
+static ssize_t aspm_attr_store_common(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t len, u8 state)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+	bool state_enable;
+
+	if (kstrtobool(buf, &state_enable) < 0)
+		return -EINVAL;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+
+	if (state_enable) {
+		link->aspm_disable &= ~state;
+		/* need to enable L1 for substates */
+		if (state & ASPM_STATE_L1SS)
+			link->aspm_disable &= ~ASPM_STATE_L1;
+	} else {
+		link->aspm_disable |= state;
+		if (state & ASPM_STATE_L1)
+			link->aspm_disable |= ASPM_STATE_L1SS;
+	}
+
+	pcie_config_aspm_link(link, policy_to_aspm_state(link));
+
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+
+	return len;
+}
+
+#define ASPM_ATTR(_f, _s)						\
+static ssize_t _f##_show(struct device *dev,				\
+			 struct device_attribute *attr, char *buf)	\
+{ return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); }	\
+									\
+static ssize_t _f##_store(struct device *dev,				\
+			  struct device_attribute *attr,		\
+			  const char *buf, size_t len)			\
+{ return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); }
+
+ASPM_ATTR(l0s_aspm, L0S)
+ASPM_ATTR(l1_aspm, L1)
+ASPM_ATTR(l1_1_aspm, L1_1)
+ASPM_ATTR(l1_2_aspm, L1_2)
+ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM)
+ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM)
+
+static ssize_t clkpm_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+
+	return sysfs_emit(buf, "%d\n", link->clkpm_enabled);
+}
+
+static ssize_t clkpm_store(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t len)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+	bool state_enable;
+
+	if (kstrtobool(buf, &state_enable) < 0)
+		return -EINVAL;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+
+	link->clkpm_disable = !state_enable;
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
+
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+
+	return len;
+}
+
+static DEVICE_ATTR_RW(clkpm);
+static DEVICE_ATTR_RW(l0s_aspm);
+static DEVICE_ATTR_RW(l1_aspm);
+static DEVICE_ATTR_RW(l1_1_aspm);
+static DEVICE_ATTR_RW(l1_2_aspm);
+static DEVICE_ATTR_RW(l1_1_pcipm);
+static DEVICE_ATTR_RW(l1_2_pcipm);
+
+static struct attribute *aspm_ctrl_attrs[] = {
+	&dev_attr_clkpm.attr,
+	&dev_attr_l0s_aspm.attr,
+	&dev_attr_l1_aspm.attr,
+	&dev_attr_l1_1_aspm.attr,
+	&dev_attr_l1_2_aspm.attr,
+	&dev_attr_l1_1_pcipm.attr,
+	&dev_attr_l1_2_pcipm.attr,
+	NULL
+};
+
+static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj,
+					   struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
+	static const u8 aspm_state_map[] = {
+		ASPM_STATE_L0S,
+		ASPM_STATE_L1,
+		ASPM_STATE_L1_1,
+		ASPM_STATE_L1_2,
+		ASPM_STATE_L1_1_PCIPM,
+		ASPM_STATE_L1_2_PCIPM,
+	};
+
+	if (aspm_disabled || !link)
+		return 0;
+
+	if (n == 0)
+		return link->clkpm_capable ? a->mode : 0;
+
+	return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0;
+}
+
+const struct attribute_group aspm_ctrl_attr_group = {
+	.name = "link",
+	.attrs = aspm_ctrl_attrs,
+	.is_visible = aspm_ctrl_attrs_are_visible,
+};
+
+static int __init pcie_aspm_disable(char *str)
+{
+	if (!strcmp(str, "off")) {
+		aspm_policy = POLICY_DEFAULT;
+		aspm_disabled = 1;
+		aspm_support_enabled = false;
+		printk(KERN_INFO "PCIe ASPM is disabled\n");
+	} else if (!strcmp(str, "force")) {
+		aspm_force = 1;
+		printk(KERN_INFO "PCIe ASPM is forcibly enabled\n");
+	}
+	return 1;
+}
+
+__setup("pcie_aspm=", pcie_aspm_disable);
+
+void pcie_no_aspm(void)
+{
+	/*
+	 * Disabling ASPM is intended to prevent the kernel from modifying
+	 * existing hardware state, not to clear existing state. To that end:
+	 * (a) set policy to POLICY_DEFAULT in order to avoid changing state
+	 * (b) prevent userspace from changing policy
+	 */
+	if (!aspm_force) {
+		aspm_policy = POLICY_DEFAULT;
+		aspm_disabled = 1;
+	}
+}
+
+bool pcie_aspm_support_enabled(void)
+{
+	return aspm_support_enabled;
+}
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
new file mode 100644
index 000000000..a5d7c69b7
--- /dev/null
+++ b/drivers/pci/pcie/dpc.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Express Downstream Port Containment services driver
+ * Author: Keith Busch <keith.busch@intel.com>
+ *
+ * Copyright (C) 2016 Intel Corp.
+ */
+
+#define dev_fmt(fmt) "DPC: " fmt
+
+#include <linux/aer.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include "portdrv.h"
+#include "../pci.h"
+
+static const char * const rp_pio_error_string[] = {
+	"Configuration Request received UR Completion",	 /* Bit Position 0  */
+	"Configuration Request received CA Completion",	 /* Bit Position 1  */
+	"Configuration Request Completion Timeout",	 /* Bit Position 2  */
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	"I/O Request received UR Completion",		 /* Bit Position 8  */
+	"I/O Request received CA Completion",		 /* Bit Position 9  */
+	"I/O Request Completion Timeout",		 /* Bit Position 10 */
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	"Memory Request received UR Completion",	 /* Bit Position 16 */
+	"Memory Request received CA Completion",	 /* Bit Position 17 */
+	"Memory Request Completion Timeout",		 /* Bit Position 18 */
+};
+
+void pci_save_dpc_state(struct pci_dev *dev)
+{
+	struct pci_cap_saved_state *save_state;
+	u16 *cap;
+
+	if (!pci_is_pcie(dev))
+		return;
+
+	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
+	if (!save_state)
+		return;
+
+	cap = (u16 *)&save_state->cap.data[0];
+	pci_read_config_word(dev, dev->dpc_cap + PCI_EXP_DPC_CTL, cap);
+}
+
+void pci_restore_dpc_state(struct pci_dev *dev)
+{
+	struct pci_cap_saved_state *save_state;
+	u16 *cap;
+
+	if (!pci_is_pcie(dev))
+		return;
+
+	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
+	if (!save_state)
+		return;
+
+	cap = (u16 *)&save_state->cap.data[0];
+	pci_write_config_word(dev, dev->dpc_cap + PCI_EXP_DPC_CTL, *cap);
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(dpc_completed_waitqueue);
+
+#ifdef CONFIG_HOTPLUG_PCI_PCIE
+static bool dpc_completed(struct pci_dev *pdev)
+{
+	u16 status;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
+	if ((!PCI_POSSIBLE_ERROR(status)) && (status & PCI_EXP_DPC_STATUS_TRIGGER))
+		return false;
+
+	if (test_bit(PCI_DPC_RECOVERING, &pdev->priv_flags))
+		return false;
+
+	return true;
+}
+
+/**
+ * pci_dpc_recovered - whether DPC triggered and has recovered successfully
+ * @pdev: PCI device
+ *
+ * Return true if DPC was triggered for @pdev and has recovered successfully.
+ * Wait for recovery if it hasn't completed yet.  Called from the PCIe hotplug
+ * driver to recognize and ignore Link Down/Up events caused by DPC.
+ */
+bool pci_dpc_recovered(struct pci_dev *pdev)
+{
+	struct pci_host_bridge *host;
+
+	if (!pdev->dpc_cap)
+		return false;
+
+	/*
+	 * Synchronization between hotplug and DPC is not supported
+	 * if DPC is owned by firmware and EDR is not enabled.
+	 */
+	host = pci_find_host_bridge(pdev->bus);
+	if (!host->native_dpc && !IS_ENABLED(CONFIG_PCIE_EDR))
+		return false;
+
+	/*
+	 * Need a timeout in case DPC never completes due to failure of
+	 * dpc_wait_rp_inactive().  The spec doesn't mandate a time limit,
+	 * but reports indicate that DPC completes within 4 seconds.
+	 */
+	wait_event_timeout(dpc_completed_waitqueue, dpc_completed(pdev),
+			   msecs_to_jiffies(4000));
+
+	return test_and_clear_bit(PCI_DPC_RECOVERED, &pdev->priv_flags);
+}
+#endif /* CONFIG_HOTPLUG_PCI_PCIE */
+
+static int dpc_wait_rp_inactive(struct pci_dev *pdev)
+{
+	unsigned long timeout = jiffies + HZ;
+	u16 cap = pdev->dpc_cap, status;
+
+	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+	while (status & PCI_EXP_DPC_RP_BUSY &&
+					!time_after(jiffies, timeout)) {
+		msleep(10);
+		pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+	}
+	if (status & PCI_EXP_DPC_RP_BUSY) {
+		pci_warn(pdev, "root port still busy\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
+{
+	pci_ers_result_t ret;
+	u16 cap;
+
+	set_bit(PCI_DPC_RECOVERING, &pdev->priv_flags);
+
+	/*
+	 * DPC disables the Link automatically in hardware, so it has
+	 * already been reset by the time we get here.
+	 */
+	cap = pdev->dpc_cap;
+
+	/*
+	 * Wait until the Link is inactive, then clear DPC Trigger Status
+	 * to allow the Port to leave DPC.
+	 */
+	if (!pcie_wait_for_link(pdev, false))
+		pci_info(pdev, "Data Link Layer Link Active not cleared in 1000 msec\n");
+
+	if (pdev->dpc_rp_extensions && dpc_wait_rp_inactive(pdev)) {
+		clear_bit(PCI_DPC_RECOVERED, &pdev->priv_flags);
+		ret = PCI_ERS_RESULT_DISCONNECT;
+		goto out;
+	}
+
+	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
+			      PCI_EXP_DPC_STATUS_TRIGGER);
+
+	if (pci_bridge_wait_for_secondary_bus(pdev, "DPC",
+					      PCIE_RESET_READY_POLL_MS)) {
+		clear_bit(PCI_DPC_RECOVERED, &pdev->priv_flags);
+		ret = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		set_bit(PCI_DPC_RECOVERED, &pdev->priv_flags);
+		ret = PCI_ERS_RESULT_RECOVERED;
+	}
+out:
+	clear_bit(PCI_DPC_RECOVERING, &pdev->priv_flags);
+	wake_up_all(&dpc_completed_waitqueue);
+	return ret;
+}
+
+static void dpc_process_rp_pio_error(struct pci_dev *pdev)
+{
+	u16 cap = pdev->dpc_cap, dpc_status, first_error;
+	u32 status, mask, sev, syserr, exc, dw0, dw1, dw2, dw3, log, prefix;
+	int i;
+
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, &status);
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_MASK, &mask);
+	pci_err(pdev, "rp_pio_status: %#010x, rp_pio_mask: %#010x\n",
+		status, mask);
+
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SEVERITY, &sev);
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SYSERROR, &syserr);
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_EXCEPTION, &exc);
+	pci_err(pdev, "RP PIO severity=%#010x, syserror=%#010x, exception=%#010x\n",
+		sev, syserr, exc);
+
+	/* Get First Error Pointer */
+	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &dpc_status);
+	first_error = (dpc_status & 0x1f00) >> 8;
+
+	for (i = 0; i < ARRAY_SIZE(rp_pio_error_string); i++) {
+		if ((status & ~mask) & (1 << i))
+			pci_err(pdev, "[%2d] %s%s\n", i, rp_pio_error_string[i],
+				first_error == i ? " (First)" : "");
+	}
+
+	if (pdev->dpc_rp_log_size < 4)
+		goto clear_status;
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG,
+			      &dw0);
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG + 4,
+			      &dw1);
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG + 8,
+			      &dw2);
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG + 12,
+			      &dw3);
+	pci_err(pdev, "TLP Header: %#010x %#010x %#010x %#010x\n",
+		dw0, dw1, dw2, dw3);
+
+	if (pdev->dpc_rp_log_size < 5)
+		goto clear_status;
+	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG, &log);
+	pci_err(pdev, "RP PIO ImpSpec Log %#010x\n", log);
+
+	for (i = 0; i < pdev->dpc_rp_log_size - 5; i++) {
+		pci_read_config_dword(pdev,
+			cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
+		pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
+	}
+ clear_status:
+	pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status);
+}
+
+static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
+					  struct aer_err_info *info)
+{
+	int pos = dev->aer_cap;
+	u32 status, mask, sev;
+
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask);
+	status &= ~mask;
+	if (!status)
+		return 0;
+
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
+	status &= sev;
+	if (status)
+		info->severity = AER_FATAL;
+	else
+		info->severity = AER_NONFATAL;
+
+	return 1;
+}
+
+void dpc_process_error(struct pci_dev *pdev)
+{
+	u16 cap = pdev->dpc_cap, status, source, reason, ext_reason;
+	struct aer_err_info info;
+
+	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+	pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
+
+	pci_info(pdev, "containment event, status:%#06x source:%#06x\n",
+		 status, source);
+
+	reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN) >> 1;
+	ext_reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT) >> 5;
+	pci_warn(pdev, "%s detected\n",
+		 (reason == 0) ? "unmasked uncorrectable error" :
+		 (reason == 1) ? "ERR_NONFATAL" :
+		 (reason == 2) ? "ERR_FATAL" :
+		 (ext_reason == 0) ? "RP PIO error" :
+		 (ext_reason == 1) ? "software trigger" :
+				     "reserved error");
+
+	/* show RP PIO error detail information */
+	if (pdev->dpc_rp_extensions && reason == 3 && ext_reason == 0)
+		dpc_process_rp_pio_error(pdev);
+	else if (reason == 0 &&
+		 dpc_get_aer_uncorrect_severity(pdev, &info) &&
+		 aer_get_device_error_info(pdev, &info)) {
+		aer_print_error(pdev, &info);
+		pci_aer_clear_nonfatal_status(pdev);
+		pci_aer_clear_fatal_status(pdev);
+	}
+}
+
+static irqreturn_t dpc_handler(int irq, void *context)
+{
+	struct pci_dev *pdev = context;
+
+	dpc_process_error(pdev);
+
+	/* We configure DPC so it only triggers on ERR_FATAL */
+	pcie_do_recovery(pdev, pci_channel_io_frozen, dpc_reset_link);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dpc_irq(int irq, void *context)
+{
+	struct pci_dev *pdev = context;
+	u16 cap = pdev->dpc_cap, status;
+
+	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+
+	if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || PCI_POSSIBLE_ERROR(status))
+		return IRQ_NONE;
+
+	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
+			      PCI_EXP_DPC_STATUS_INTERRUPT);
+	if (status & PCI_EXP_DPC_STATUS_TRIGGER)
+		return IRQ_WAKE_THREAD;
+	return IRQ_HANDLED;
+}
+
+void pci_dpc_init(struct pci_dev *pdev)
+{
+	u16 cap;
+
+	pdev->dpc_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
+	if (!pdev->dpc_cap)
+		return;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CAP, &cap);
+	if (!(cap & PCI_EXP_DPC_CAP_RP_EXT))
+		return;
+
+	pdev->dpc_rp_extensions = true;
+
+	/* Quirks may set dpc_rp_log_size if device or firmware is buggy */
+	if (!pdev->dpc_rp_log_size) {
+		pdev->dpc_rp_log_size =
+			(cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
+		if (pdev->dpc_rp_log_size < 4 || pdev->dpc_rp_log_size > 9) {
+			pci_err(pdev, "RP PIO log size %u is invalid\n",
+				pdev->dpc_rp_log_size);
+			pdev->dpc_rp_log_size = 0;
+		}
+	}
+}
+
+#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
+static int dpc_probe(struct pcie_device *dev)
+{
+	struct pci_dev *pdev = dev->port;
+	struct device *device = &dev->device;
+	int status;
+	u16 ctl, cap;
+
+	if (!pcie_aer_is_native(pdev) && !pcie_ports_dpc_native)
+		return -ENOTSUPP;
+
+	status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
+					   dpc_handler, IRQF_SHARED,
+					   "pcie-dpc", pdev);
+	if (status) {
+		pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
+			 status);
+		return status;
+	}
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CAP, &cap);
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
+
+	ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+	pci_info(pdev, "enabled with IRQ %d\n", dev->irq);
+
+	pci_info(pdev, "error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
+		 cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
+		 FLAG(cap, PCI_EXP_DPC_CAP_POISONED_TLP),
+		 FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), pdev->dpc_rp_log_size,
+		 FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
+
+	pci_add_ext_cap_save_buffer(pdev, PCI_EXT_CAP_ID_DPC, sizeof(u16));
+	return status;
+}
+
+static void dpc_remove(struct pcie_device *dev)
+{
+	struct pci_dev *pdev = dev->port;
+	u16 ctl;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
+	ctl &= ~(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+}
+
+static struct pcie_port_service_driver dpcdriver = {
+	.name		= "dpc",
+	.port_type	= PCIE_ANY_PORT,
+	.service	= PCIE_PORT_SERVICE_DPC,
+	.probe		= dpc_probe,
+	.remove		= dpc_remove,
+};
+
+int __init pcie_dpc_init(void)
+{
+	return pcie_port_service_register(&dpcdriver);
+}
diff --git a/drivers/pci/pcie/edr.c b/drivers/pci/pcie/edr.c
new file mode 100644
index 000000000..87734e4c3
--- /dev/null
+++ b/drivers/pci/pcie/edr.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Error Disconnect Recover support
+ * Author: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
+ *
+ * Copyright (C) 2020 Intel Corp.
+ */
+
+#define dev_fmt(fmt) "EDR: " fmt
+
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+
+#include "portdrv.h"
+#include "../pci.h"
+
+#define EDR_PORT_DPC_ENABLE_DSM		0x0C
+#define EDR_PORT_LOCATE_DSM		0x0D
+#define EDR_OST_SUCCESS			0x80
+#define EDR_OST_FAILED			0x81
+
+/*
+ * _DSM wrapper function to enable/disable DPC
+ * @pdev   : PCI device structure
+ *
+ * returns 0 on success or errno on failure.
+ */
+static int acpi_enable_dpc(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	union acpi_object *obj, argv4, req;
+	int status = 0;
+
+	/*
+	 * Behavior when calling unsupported _DSM functions is undefined,
+	 * so check whether EDR_PORT_DPC_ENABLE_DSM is supported.
+	 */
+	if (!acpi_check_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+			    1ULL << EDR_PORT_DPC_ENABLE_DSM))
+		return 0;
+
+	req.type = ACPI_TYPE_INTEGER;
+	req.integer.value = 1;
+
+	argv4.type = ACPI_TYPE_PACKAGE;
+	argv4.package.count = 1;
+	argv4.package.elements = &req;
+
+	/*
+	 * Per Downstream Port Containment Related Enhancements ECN to PCI
+	 * Firmware Specification r3.2, sec 4.6.12, EDR_PORT_DPC_ENABLE_DSM is
+	 * optional.  Return success if it's not implemented.
+	 */
+	obj = acpi_evaluate_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+				EDR_PORT_DPC_ENABLE_DSM, &argv4);
+	if (!obj)
+		return 0;
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		pci_err(pdev, FW_BUG "Enable DPC _DSM returned non integer\n");
+		status = -EIO;
+	}
+
+	if (obj->integer.value != 1) {
+		pci_err(pdev, "Enable DPC _DSM failed to enable DPC\n");
+		status = -EIO;
+	}
+
+	ACPI_FREE(obj);
+
+	return status;
+}
+
+/*
+ * _DSM wrapper function to locate DPC port
+ * @pdev   : Device which received EDR event
+ *
+ * Returns pci_dev or NULL.  Caller is responsible for dropping a reference
+ * on the returned pci_dev with pci_dev_put().
+ */
+static struct pci_dev *acpi_dpc_port_get(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	union acpi_object *obj;
+	u16 port;
+
+	/*
+	 * Behavior when calling unsupported _DSM functions is undefined,
+	 * so check whether EDR_PORT_DPC_ENABLE_DSM is supported.
+	 */
+	if (!acpi_check_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+			    1ULL << EDR_PORT_LOCATE_DSM))
+		return pci_dev_get(pdev);
+
+	obj = acpi_evaluate_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+				EDR_PORT_LOCATE_DSM, NULL);
+	if (!obj)
+		return pci_dev_get(pdev);
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_FREE(obj);
+		pci_err(pdev, FW_BUG "Locate Port _DSM returned non integer\n");
+		return NULL;
+	}
+
+	/*
+	 * Firmware returns DPC port BDF details in following format:
+	 *	15:8 = bus
+	 *	 7:3 = device
+	 *	 2:0 = function
+	 */
+	port = obj->integer.value;
+
+	ACPI_FREE(obj);
+
+	return pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+					   PCI_BUS_NUM(port), port & 0xff);
+}
+
+/*
+ * _OST wrapper function to let firmware know the status of EDR event
+ * @pdev   : Device used to send _OST
+ * @edev   : Device which experienced EDR event
+ * @status : Status of EDR event
+ */
+static int acpi_send_edr_status(struct pci_dev *pdev, struct pci_dev *edev,
+				u16 status)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	u32 ost_status;
+
+	pci_dbg(pdev, "Status for %s: %#x\n", pci_name(edev), status);
+
+	ost_status = PCI_DEVID(edev->bus->number, edev->devfn) << 16;
+	ost_status |= status;
+
+	status = acpi_evaluate_ost(adev->handle, ACPI_NOTIFY_DISCONNECT_RECOVER,
+				   ost_status, NULL);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void edr_handle_event(acpi_handle handle, u32 event, void *data)
+{
+	struct pci_dev *pdev = data, *edev;
+	pci_ers_result_t estate = PCI_ERS_RESULT_DISCONNECT;
+	u16 status;
+
+	if (event != ACPI_NOTIFY_DISCONNECT_RECOVER)
+		return;
+
+	pci_info(pdev, "EDR event received\n");
+
+	/* Locate the port which issued EDR event */
+	edev = acpi_dpc_port_get(pdev);
+	if (!edev) {
+		pci_err(pdev, "Firmware failed to locate DPC port\n");
+		return;
+	}
+
+	pci_dbg(pdev, "Reported EDR dev: %s\n", pci_name(edev));
+
+	/* If port does not support DPC, just send the OST */
+	if (!edev->dpc_cap) {
+		pci_err(edev, FW_BUG "This device doesn't support DPC\n");
+		goto send_ost;
+	}
+
+	/* Check if there is a valid DPC trigger */
+	pci_read_config_word(edev, edev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
+	if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
+		pci_err(edev, "Invalid DPC trigger %#010x\n", status);
+		goto send_ost;
+	}
+
+	dpc_process_error(edev);
+	pci_aer_raw_clear_status(edev);
+
+	/*
+	 * Irrespective of whether the DPC event is triggered by ERR_FATAL
+	 * or ERR_NONFATAL, since the link is already down, use the FATAL
+	 * error recovery path for both cases.
+	 */
+	estate = pcie_do_recovery(edev, pci_channel_io_frozen, dpc_reset_link);
+
+send_ost:
+
+	/*
+	 * If recovery is successful, send _OST(0xF, BDF << 16 | 0x80)
+	 * to firmware. If not successful, send _OST(0xF, BDF << 16 | 0x81).
+	 */
+	if (estate == PCI_ERS_RESULT_RECOVERED) {
+		pci_dbg(edev, "DPC port successfully recovered\n");
+		pcie_clear_device_status(edev);
+		acpi_send_edr_status(pdev, edev, EDR_OST_SUCCESS);
+	} else {
+		pci_dbg(edev, "DPC port recovery failed\n");
+		acpi_send_edr_status(pdev, edev, EDR_OST_FAILED);
+	}
+
+	pci_dev_put(edev);
+}
+
+void pci_acpi_add_edr_notifier(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	acpi_status status;
+
+	if (!adev) {
+		pci_dbg(pdev, "No valid ACPI node, skipping EDR init\n");
+		return;
+	}
+
+	status = acpi_install_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+					     edr_handle_event, pdev);
+	if (ACPI_FAILURE(status)) {
+		pci_err(pdev, "Failed to install notify handler\n");
+		return;
+	}
+
+	if (acpi_enable_dpc(pdev))
+		acpi_remove_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+					   edr_handle_event);
+	else
+		pci_dbg(pdev, "Notify handler installed\n");
+}
+
+void pci_acpi_remove_edr_notifier(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+
+	if (!adev)
+		return;
+
+	acpi_remove_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+				   edr_handle_event);
+	pci_dbg(pdev, "Notify handler removed\n");
+}
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
new file mode 100644
index 000000000..59c90d04a
--- /dev/null
+++ b/drivers/pci/pcie/err.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file implements the error recovery as a core part of PCIe error
+ * reporting. When a PCIe error is delivered, an error message will be
+ * collected and printed to console, then, an error recovery procedure
+ * will be executed by following the PCI error recovery rules.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ *	Tom Long Nguyen (tom.l.nguyen@intel.com)
+ *	Zhang Yanmin (yanmin.zhang@intel.com)
+ */
+
+#define dev_fmt(fmt) "AER: " fmt
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/aer.h>
+#include "portdrv.h"
+#include "../pci.h"
+
+static pci_ers_result_t merge_result(enum pci_ers_result orig,
+				  enum pci_ers_result new)
+{
+	if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
+		return PCI_ERS_RESULT_NO_AER_DRIVER;
+
+	if (new == PCI_ERS_RESULT_NONE)
+		return orig;
+
+	switch (orig) {
+	case PCI_ERS_RESULT_CAN_RECOVER:
+	case PCI_ERS_RESULT_RECOVERED:
+		orig = new;
+		break;
+	case PCI_ERS_RESULT_DISCONNECT:
+		if (new == PCI_ERS_RESULT_NEED_RESET)
+			orig = PCI_ERS_RESULT_NEED_RESET;
+		break;
+	default:
+		break;
+	}
+
+	return orig;
+}
+
+static int report_error_detected(struct pci_dev *dev,
+				 pci_channel_state_t state,
+				 enum pci_ers_result *result)
+{
+	struct pci_driver *pdrv;
+	pci_ers_result_t vote;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	pdrv = dev->driver;
+	if (pci_dev_is_disconnected(dev)) {
+		vote = PCI_ERS_RESULT_DISCONNECT;
+	} else if (!pci_dev_set_io_state(dev, state)) {
+		pci_info(dev, "can't recover (state transition %u -> %u invalid)\n",
+			dev->error_state, state);
+		vote = PCI_ERS_RESULT_NONE;
+	} else if (!pdrv || !pdrv->err_handler ||
+		   !pdrv->err_handler->error_detected) {
+		/*
+		 * If any device in the subtree does not have an error_detected
+		 * callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
+		 * error callbacks of "any" device in the subtree, and will
+		 * exit in the disconnected error state.
+		 */
+		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
+			pci_info(dev, "can't recover (no error_detected callback)\n");
+		} else {
+			vote = PCI_ERS_RESULT_NONE;
+		}
+	} else {
+		err_handler = pdrv->err_handler;
+		vote = err_handler->error_detected(dev, state);
+	}
+	pci_uevent_ers(dev, vote);
+	*result = merge_result(*result, vote);
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static int report_frozen_detected(struct pci_dev *dev, void *data)
+{
+	return report_error_detected(dev, pci_channel_io_frozen, data);
+}
+
+static int report_normal_detected(struct pci_dev *dev, void *data)
+{
+	return report_error_detected(dev, pci_channel_io_normal, data);
+}
+
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
+{
+	struct pci_driver *pdrv;
+	pci_ers_result_t vote, *result = data;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	pdrv = dev->driver;
+	if (!pdrv ||
+		!pdrv->err_handler ||
+		!pdrv->err_handler->mmio_enabled)
+		goto out;
+
+	err_handler = pdrv->err_handler;
+	vote = err_handler->mmio_enabled(dev);
+	*result = merge_result(*result, vote);
+out:
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static int report_slot_reset(struct pci_dev *dev, void *data)
+{
+	struct pci_driver *pdrv;
+	pci_ers_result_t vote, *result = data;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	pdrv = dev->driver;
+	if (!pdrv ||
+		!pdrv->err_handler ||
+		!pdrv->err_handler->slot_reset)
+		goto out;
+
+	err_handler = pdrv->err_handler;
+	vote = err_handler->slot_reset(dev);
+	*result = merge_result(*result, vote);
+out:
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static int report_resume(struct pci_dev *dev, void *data)
+{
+	struct pci_driver *pdrv;
+	const struct pci_error_handlers *err_handler;
+
+	device_lock(&dev->dev);
+	pdrv = dev->driver;
+	if (!pci_dev_set_io_state(dev, pci_channel_io_normal) ||
+		!pdrv ||
+		!pdrv->err_handler ||
+		!pdrv->err_handler->resume)
+		goto out;
+
+	err_handler = pdrv->err_handler;
+	err_handler->resume(dev);
+out:
+	pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+/**
+ * pci_walk_bridge - walk bridges potentially AER affected
+ * @bridge:	bridge which may be a Port, an RCEC, or an RCiEP
+ * @cb:		callback to be called for each device found
+ * @userdata:	arbitrary pointer to be passed to callback
+ *
+ * If the device provided is a bridge, walk the subordinate bus, including
+ * any bridged devices on buses under this bus.  Call the provided callback
+ * on each device found.
+ *
+ * If the device provided has no subordinate bus, e.g., an RCEC or RCiEP,
+ * call the callback on the device itself.
+ */
+static void pci_walk_bridge(struct pci_dev *bridge,
+			    int (*cb)(struct pci_dev *, void *),
+			    void *userdata)
+{
+	if (bridge->subordinate)
+		pci_walk_bus(bridge->subordinate, cb, userdata);
+	else
+		cb(bridge, userdata);
+}
+
+pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
+		pci_channel_state_t state,
+		pci_ers_result_t (*reset_subordinates)(struct pci_dev *pdev))
+{
+	int type = pci_pcie_type(dev);
+	struct pci_dev *bridge;
+	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
+	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+
+	/*
+	 * If the error was detected by a Root Port, Downstream Port, RCEC,
+	 * or RCiEP, recovery runs on the device itself.  For Ports, that
+	 * also includes any subordinate devices.
+	 *
+	 * If it was detected by another device (Endpoint, etc), recovery
+	 * runs on the device and anything else under the same Port, i.e.,
+	 * everything under "bridge".
+	 */
+	if (type == PCI_EXP_TYPE_ROOT_PORT ||
+	    type == PCI_EXP_TYPE_DOWNSTREAM ||
+	    type == PCI_EXP_TYPE_RC_EC ||
+	    type == PCI_EXP_TYPE_RC_END)
+		bridge = dev;
+	else
+		bridge = pci_upstream_bridge(dev);
+
+	pci_dbg(bridge, "broadcast error_detected message\n");
+	if (state == pci_channel_io_frozen) {
+		pci_walk_bridge(bridge, report_frozen_detected, &status);
+		if (reset_subordinates(bridge) != PCI_ERS_RESULT_RECOVERED) {
+			pci_warn(bridge, "subordinate device reset failed\n");
+			goto failed;
+		}
+	} else {
+		pci_walk_bridge(bridge, report_normal_detected, &status);
+	}
+
+	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
+		status = PCI_ERS_RESULT_RECOVERED;
+		pci_dbg(bridge, "broadcast mmio_enabled message\n");
+		pci_walk_bridge(bridge, report_mmio_enabled, &status);
+	}
+
+	if (status == PCI_ERS_RESULT_NEED_RESET) {
+		/*
+		 * TODO: Should call platform-specific
+		 * functions to reset slot before calling
+		 * drivers' slot_reset callbacks?
+		 */
+		status = PCI_ERS_RESULT_RECOVERED;
+		pci_dbg(bridge, "broadcast slot_reset message\n");
+		pci_walk_bridge(bridge, report_slot_reset, &status);
+	}
+
+	if (status != PCI_ERS_RESULT_RECOVERED)
+		goto failed;
+
+	pci_dbg(bridge, "broadcast resume message\n");
+	pci_walk_bridge(bridge, report_resume, &status);
+
+	/*
+	 * If we have native control of AER, clear error status in the device
+	 * that detected the error.  If the platform retained control of AER,
+	 * it is responsible for clearing this status.  In that case, the
+	 * signaling device may not even be visible to the OS.
+	 */
+	if (host->native_aer || pcie_ports_native) {
+		pcie_clear_device_status(dev);
+		pci_aer_clear_nonfatal_status(dev);
+	}
+	pci_info(bridge, "device recovery successful\n");
+	return status;
+
+failed:
+	pci_uevent_ers(bridge, PCI_ERS_RESULT_DISCONNECT);
+
+	/* TODO: Should kernel panic here? */
+	pci_info(bridge, "device recovery failed\n");
+
+	return status;
+}
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
new file mode 100644
index 000000000..ef8ce436e
--- /dev/null
+++ b/drivers/pci/pcie/pme.c
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe Native PME support
+ *
+ * Copyright (C) 2007 - 2009 Intel Corp
+ * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ */
+
+#define dev_fmt(fmt) "PME: " fmt
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+/*
+ * If this switch is set, MSI will not be used for PCIe PME signaling.  This
+ * causes the PCIe port driver to use INTx interrupts only, but it turns out
+ * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
+ * wake-up from system sleep states.
+ */
+bool pcie_pme_msi_disabled;
+
+static int __init pcie_pme_setup(char *str)
+{
+	if (!strncmp(str, "nomsi", 5))
+		pcie_pme_msi_disabled = true;
+
+	return 1;
+}
+__setup("pcie_pme=", pcie_pme_setup);
+
+struct pcie_pme_service_data {
+	spinlock_t lock;
+	struct pcie_device *srv;
+	struct work_struct work;
+	bool noirq; /* If set, keep the PME interrupt disabled. */
+};
+
+/**
+ * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
+ * @dev: PCIe root port or event collector.
+ * @enable: Enable or disable the interrupt.
+ */
+void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+{
+	if (enable)
+		pcie_capability_set_word(dev, PCI_EXP_RTCTL,
+					 PCI_EXP_RTCTL_PMEIE);
+	else
+		pcie_capability_clear_word(dev, PCI_EXP_RTCTL,
+					   PCI_EXP_RTCTL_PMEIE);
+}
+
+/**
+ * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
+ * @bus: PCI bus to scan.
+ *
+ * Scan given PCI bus and all buses under it for devices asserting PME#.
+ */
+static bool pcie_pme_walk_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	bool ret = false;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		/* Skip PCIe devices in case we started from a root port. */
+		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+			if (dev->pme_poll)
+				dev->pme_poll = false;
+
+			pci_wakeup_event(dev);
+			pm_request_resume(&dev->dev);
+			ret = true;
+		}
+
+		if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
+			ret = true;
+	}
+
+	return ret;
+}
+
+/**
+ * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
+ * @bus: Secondary bus of the bridge.
+ * @devfn: Device/function number to check.
+ *
+ * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
+ * PCIe PME message.  In such that case the bridge should use the Requester ID
+ * of device/function number 0 on its secondary bus.
+ */
+static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
+{
+	struct pci_dev *dev;
+	bool found = false;
+
+	if (devfn)
+		return false;
+
+	dev = pci_dev_get(bus->self);
+	if (!dev)
+		return false;
+
+	if (pci_is_pcie(dev) && pci_pcie_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE) {
+		down_read(&pci_bus_sem);
+		if (pcie_pme_walk_bus(bus))
+			found = true;
+		up_read(&pci_bus_sem);
+	}
+
+	pci_dev_put(dev);
+	return found;
+}
+
+/**
+ * pcie_pme_handle_request - Find device that generated PME and handle it.
+ * @port: Root port or event collector that generated the PME interrupt.
+ * @req_id: PCIe Requester ID of the device that generated the PME.
+ */
+static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
+{
+	u8 busnr = req_id >> 8, devfn = req_id & 0xff;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	bool found = false;
+
+	/* First, check if the PME is from the root port itself. */
+	if (port->devfn == devfn && port->bus->number == busnr) {
+		if (port->pme_poll)
+			port->pme_poll = false;
+
+		if (pci_check_pme_status(port)) {
+			pm_request_resume(&port->dev);
+			found = true;
+		} else {
+			/*
+			 * Apparently, the root port generated the PME on behalf
+			 * of a non-PCIe device downstream.  If this is done by
+			 * a root port, the Requester ID field in its status
+			 * register may contain either the root port's, or the
+			 * source device's information (PCI Express Base
+			 * Specification, Rev. 2.0, Section 6.1.9).
+			 */
+			down_read(&pci_bus_sem);
+			found = pcie_pme_walk_bus(port->subordinate);
+			up_read(&pci_bus_sem);
+		}
+		goto out;
+	}
+
+	/* Second, find the bus the source device is on. */
+	bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
+	if (!bus)
+		goto out;
+
+	/* Next, check if the PME is from a PCIe-PCI bridge. */
+	found = pcie_pme_from_pci_bridge(bus, devfn);
+	if (found)
+		goto out;
+
+	/* Finally, try to find the PME source on the bus. */
+	down_read(&pci_bus_sem);
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_get(dev);
+		if (dev->devfn == devfn) {
+			found = true;
+			break;
+		}
+		pci_dev_put(dev);
+	}
+	up_read(&pci_bus_sem);
+
+	if (found) {
+		/* The device is there, but we have to check its PME status. */
+		found = pci_check_pme_status(dev);
+		if (found) {
+			if (dev->pme_poll)
+				dev->pme_poll = false;
+
+			pci_wakeup_event(dev);
+			pm_request_resume(&dev->dev);
+		}
+		pci_dev_put(dev);
+	} else if (devfn) {
+		/*
+		 * The device is not there, but we can still try to recover by
+		 * assuming that the PME was reported by a PCIe-PCI bridge that
+		 * used devfn different from zero.
+		 */
+		pci_info(port, "interrupt generated for non-existent device %02x:%02x.%d\n",
+			 busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
+		found = pcie_pme_from_pci_bridge(bus, 0);
+	}
+
+ out:
+	if (!found)
+		pci_info(port, "Spurious native interrupt!\n");
+}
+
+/**
+ * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
+ * @work: Work structure giving access to service data.
+ */
+static void pcie_pme_work_fn(struct work_struct *work)
+{
+	struct pcie_pme_service_data *data =
+			container_of(work, struct pcie_pme_service_data, work);
+	struct pci_dev *port = data->srv->port;
+	u32 rtsta;
+
+	spin_lock_irq(&data->lock);
+
+	for (;;) {
+		if (data->noirq)
+			break;
+
+		pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
+		if (PCI_POSSIBLE_ERROR(rtsta))
+			break;
+
+		if (rtsta & PCI_EXP_RTSTA_PME) {
+			/*
+			 * Clear PME status of the port.  If there are other
+			 * pending PMEs, the status will be set again.
+			 */
+			pcie_clear_root_pme_status(port);
+
+			spin_unlock_irq(&data->lock);
+			pcie_pme_handle_request(port, rtsta & 0xffff);
+			spin_lock_irq(&data->lock);
+
+			continue;
+		}
+
+		/* No need to loop if there are no more PMEs pending. */
+		if (!(rtsta & PCI_EXP_RTSTA_PENDING))
+			break;
+
+		spin_unlock_irq(&data->lock);
+		cpu_relax();
+		spin_lock_irq(&data->lock);
+	}
+
+	if (!data->noirq)
+		pcie_pme_interrupt_enable(port, true);
+
+	spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
+ * @irq: Interrupt vector.
+ * @context: Interrupt context pointer.
+ */
+static irqreturn_t pcie_pme_irq(int irq, void *context)
+{
+	struct pci_dev *port;
+	struct pcie_pme_service_data *data;
+	u32 rtsta;
+	unsigned long flags;
+
+	port = ((struct pcie_device *)context)->port;
+	data = get_service_data((struct pcie_device *)context);
+
+	spin_lock_irqsave(&data->lock, flags);
+	pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
+
+	if (PCI_POSSIBLE_ERROR(rtsta) || !(rtsta & PCI_EXP_RTSTA_PME)) {
+		spin_unlock_irqrestore(&data->lock, flags);
+		return IRQ_NONE;
+	}
+
+	pcie_pme_interrupt_enable(port, false);
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	/* We don't use pm_wq, because it's freezable. */
+	schedule_work(&data->work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * pcie_pme_can_wakeup - Set the wakeup capability flag.
+ * @dev: PCI device to handle.
+ * @ign: Ignored.
+ */
+static int pcie_pme_can_wakeup(struct pci_dev *dev, void *ign)
+{
+	device_set_wakeup_capable(&dev->dev, true);
+	return 0;
+}
+
+/**
+ * pcie_pme_mark_devices - Set the wakeup flag for devices below a port.
+ * @port: PCIe root port or event collector to handle.
+ *
+ * For each device below given root port, including the port itself (or for each
+ * root complex integrated endpoint if @port is a root complex event collector)
+ * set the flag indicating that it can signal run-time wake-up events.
+ */
+static void pcie_pme_mark_devices(struct pci_dev *port)
+{
+	pcie_pme_can_wakeup(port, NULL);
+
+	if (pci_pcie_type(port) == PCI_EXP_TYPE_RC_EC)
+		pcie_walk_rcec(port, pcie_pme_can_wakeup, NULL);
+	else if (port->subordinate)
+		pci_walk_bus(port->subordinate, pcie_pme_can_wakeup, NULL);
+}
+
+/**
+ * pcie_pme_probe - Initialize PCIe PME service for given root port.
+ * @srv: PCIe service to initialize.
+ */
+static int pcie_pme_probe(struct pcie_device *srv)
+{
+	struct pci_dev *port = srv->port;
+	struct pcie_pme_service_data *data;
+	int type = pci_pcie_type(port);
+	int ret;
+
+	/* Limit to Root Ports or Root Complex Event Collectors */
+	if (type != PCI_EXP_TYPE_RC_EC &&
+	    type != PCI_EXP_TYPE_ROOT_PORT)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+	INIT_WORK(&data->work, pcie_pme_work_fn);
+	data->srv = srv;
+	set_service_data(srv, data);
+
+	pcie_pme_interrupt_enable(port, false);
+	pcie_clear_root_pme_status(port);
+
+	ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
+	if (ret) {
+		kfree(data);
+		return ret;
+	}
+
+	pci_info(port, "Signaling with IRQ %d\n", srv->irq);
+
+	pcie_pme_mark_devices(port);
+	pcie_pme_interrupt_enable(port, true);
+	return 0;
+}
+
+static bool pcie_pme_check_wakeup(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	if (!bus)
+		return false;
+
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		if (device_may_wakeup(&dev->dev)
+		    || pcie_pme_check_wakeup(dev->subordinate))
+			return true;
+
+	return false;
+}
+
+static void pcie_pme_disable_interrupt(struct pci_dev *port,
+				       struct pcie_pme_service_data *data)
+{
+	spin_lock_irq(&data->lock);
+	pcie_pme_interrupt_enable(port, false);
+	pcie_clear_root_pme_status(port);
+	data->noirq = true;
+	spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_suspend - Suspend PCIe PME service device.
+ * @srv: PCIe service device to suspend.
+ */
+static int pcie_pme_suspend(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+	struct pci_dev *port = srv->port;
+	bool wakeup;
+	int ret;
+
+	if (device_may_wakeup(&port->dev)) {
+		wakeup = true;
+	} else {
+		down_read(&pci_bus_sem);
+		wakeup = pcie_pme_check_wakeup(port->subordinate);
+		up_read(&pci_bus_sem);
+	}
+	if (wakeup) {
+		ret = enable_irq_wake(srv->irq);
+		if (!ret)
+			return 0;
+	}
+
+	pcie_pme_disable_interrupt(port, data);
+
+	synchronize_irq(srv->irq);
+
+	return 0;
+}
+
+/**
+ * pcie_pme_resume - Resume PCIe PME service device.
+ * @srv: PCIe service device to resume.
+ */
+static int pcie_pme_resume(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+
+	spin_lock_irq(&data->lock);
+	if (data->noirq) {
+		struct pci_dev *port = srv->port;
+
+		pcie_clear_root_pme_status(port);
+		pcie_pme_interrupt_enable(port, true);
+		data->noirq = false;
+	} else {
+		disable_irq_wake(srv->irq);
+	}
+	spin_unlock_irq(&data->lock);
+
+	return 0;
+}
+
+/**
+ * pcie_pme_remove - Prepare PCIe PME service device for removal.
+ * @srv: PCIe service device to remove.
+ */
+static void pcie_pme_remove(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+
+	pcie_pme_disable_interrupt(srv->port, data);
+	free_irq(srv->irq, srv);
+	cancel_work_sync(&data->work);
+	kfree(data);
+}
+
+static struct pcie_port_service_driver pcie_pme_driver = {
+	.name		= "pcie_pme",
+	.port_type	= PCIE_ANY_PORT,
+	.service	= PCIE_PORT_SERVICE_PME,
+
+	.probe		= pcie_pme_probe,
+	.suspend	= pcie_pme_suspend,
+	.resume		= pcie_pme_resume,
+	.remove		= pcie_pme_remove,
+};
+
+/**
+ * pcie_pme_init - Register the PCIe PME service driver.
+ */
+int __init pcie_pme_init(void)
+{
+	return pcie_port_service_register(&pcie_pme_driver);
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
new file mode 100644
index 000000000..0ef4bf5f8
--- /dev/null
+++ b/drivers/pci/pcie/portdrv.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Purpose:	PCI Express Port Bus Driver's Internal Data Structures
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PORTDRV_H_
+#define _PORTDRV_H_
+
+#include <linux/compiler.h>
+
+/* Service Type */
+#define PCIE_PORT_SERVICE_PME_SHIFT	0	/* Power Management Event */
+#define PCIE_PORT_SERVICE_PME		(1 << PCIE_PORT_SERVICE_PME_SHIFT)
+#define PCIE_PORT_SERVICE_AER_SHIFT	1	/* Advanced Error Reporting */
+#define PCIE_PORT_SERVICE_AER		(1 << PCIE_PORT_SERVICE_AER_SHIFT)
+#define PCIE_PORT_SERVICE_HP_SHIFT	2	/* Native Hotplug */
+#define PCIE_PORT_SERVICE_HP		(1 << PCIE_PORT_SERVICE_HP_SHIFT)
+#define PCIE_PORT_SERVICE_DPC_SHIFT	3	/* Downstream Port Containment */
+#define PCIE_PORT_SERVICE_DPC		(1 << PCIE_PORT_SERVICE_DPC_SHIFT)
+#define PCIE_PORT_SERVICE_BWNOTIF_SHIFT	4	/* Bandwidth notification */
+#define PCIE_PORT_SERVICE_BWNOTIF	(1 << PCIE_PORT_SERVICE_BWNOTIF_SHIFT)
+
+#define PCIE_PORT_DEVICE_MAXSERVICES   5
+
+extern bool pcie_ports_dpc_native;
+
+#ifdef CONFIG_PCIEAER
+int pcie_aer_init(void);
+int pcie_aer_is_native(struct pci_dev *dev);
+#else
+static inline int pcie_aer_init(void) { return 0; }
+static inline int pcie_aer_is_native(struct pci_dev *dev) { return 0; }
+#endif
+
+#ifdef CONFIG_HOTPLUG_PCI_PCIE
+int pcie_hp_init(void);
+#else
+static inline int pcie_hp_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_PCIE_PME
+int pcie_pme_init(void);
+#else
+static inline int pcie_pme_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_PCIE_DPC
+int pcie_dpc_init(void);
+#else
+static inline int pcie_dpc_init(void) { return 0; }
+#endif
+
+/* Port Type */
+#define PCIE_ANY_PORT			(~0)
+
+struct pcie_device {
+	int		irq;	    /* Service IRQ/MSI/MSI-X Vector */
+	struct pci_dev *port;	    /* Root/Upstream/Downstream Port */
+	u32		service;    /* Port service this device represents */
+	void		*priv_data; /* Service Private Data */
+	struct device	device;     /* Generic Device Interface */
+};
+#define to_pcie_device(d) container_of(d, struct pcie_device, device)
+
+static inline void set_service_data(struct pcie_device *dev, void *data)
+{
+	dev->priv_data = data;
+}
+
+static inline void *get_service_data(struct pcie_device *dev)
+{
+	return dev->priv_data;
+}
+
+struct pcie_port_service_driver {
+	const char *name;
+	int (*probe)(struct pcie_device *dev);
+	void (*remove)(struct pcie_device *dev);
+	int (*suspend)(struct pcie_device *dev);
+	int (*resume_noirq)(struct pcie_device *dev);
+	int (*resume)(struct pcie_device *dev);
+	int (*runtime_suspend)(struct pcie_device *dev);
+	int (*runtime_resume)(struct pcie_device *dev);
+
+	int (*slot_reset)(struct pcie_device *dev);
+
+	int port_type;  /* Type of the port this driver can handle */
+	u32 service;    /* Port service this device represents */
+
+	struct device_driver driver;
+};
+#define to_service_driver(d) \
+	container_of(d, struct pcie_port_service_driver, driver)
+
+int pcie_port_service_register(struct pcie_port_service_driver *new);
+void pcie_port_service_unregister(struct pcie_port_service_driver *new);
+
+/*
+ * The PCIe Capability Interrupt Message Number (PCIe r3.1, sec 7.8.2) must
+ * be one of the first 32 MSI-X entries.  Per PCI r3.0, sec 6.8.3.1, MSI
+ * supports a maximum of 32 vectors per function.
+ */
+#define PCIE_PORT_MAX_MSI_ENTRIES	32
+
+#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
+
+extern struct bus_type pcie_port_bus_type;
+int pcie_port_device_register(struct pci_dev *dev);
+int pcie_port_device_iter(struct device *dev, void *data);
+#ifdef CONFIG_PM
+int pcie_port_device_suspend(struct device *dev);
+int pcie_port_device_resume_noirq(struct device *dev);
+int pcie_port_device_resume(struct device *dev);
+int pcie_port_device_runtime_suspend(struct device *dev);
+int pcie_port_device_runtime_resume(struct device *dev);
+#endif
+void pcie_port_device_remove(struct pci_dev *dev);
+
+struct pci_dev;
+
+#ifdef CONFIG_PCIE_PME
+extern bool pcie_pme_msi_disabled;
+
+static inline void pcie_pme_disable_msi(void)
+{
+	pcie_pme_msi_disabled = true;
+}
+
+static inline bool pcie_pme_no_msi(void)
+{
+	return pcie_pme_msi_disabled;
+}
+
+void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable);
+#else /* !CONFIG_PCIE_PME */
+static inline void pcie_pme_disable_msi(void) {}
+static inline bool pcie_pme_no_msi(void) { return false; }
+static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
+#endif /* !CONFIG_PCIE_PME */
+
+struct device *pcie_port_find_device(struct pci_dev *dev, u32 service);
+#endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
new file mode 100644
index 000000000..1ac7fec47
--- /dev/null
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Purpose:	PCI Express Port Bus Driver's Core Functions
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/aer.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+struct portdrv_service_data {
+	struct pcie_port_service_driver *drv;
+	struct device *dev;
+	u32 service;
+};
+
+/**
+ * release_pcie_device - free PCI Express port service device structure
+ * @dev: Port service device to release
+ *
+ * Invoked automatically when device is being removed in response to
+ * device_unregister(dev).  Release all resources being claimed.
+ */
+static void release_pcie_device(struct device *dev)
+{
+	kfree(to_pcie_device(dev));
+}
+
+/*
+ * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if
+ * services are enabled in "mask".  Return the number of MSI/MSI-X vectors
+ * required to accommodate the largest Message Number.
+ */
+static int pcie_message_numbers(struct pci_dev *dev, int mask,
+				u32 *pme, u32 *aer, u32 *dpc)
+{
+	u32 nvec = 0, pos;
+	u16 reg16;
+
+	/*
+	 * The Interrupt Message Number indicates which vector is used, i.e.,
+	 * the MSI-X table entry or the MSI offset between the base Message
+	 * Data and the generated interrupt message.  See PCIe r3.1, sec
+	 * 7.8.2, 7.10.10, 7.31.2.
+	 */
+
+	if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP |
+		    PCIE_PORT_SERVICE_BWNOTIF)) {
+		pcie_capability_read_word(dev, PCI_EXP_FLAGS, &reg16);
+		*pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
+		nvec = *pme + 1;
+	}
+
+#ifdef CONFIG_PCIEAER
+	if (mask & PCIE_PORT_SERVICE_AER) {
+		u32 reg32;
+
+		pos = dev->aer_cap;
+		if (pos) {
+			pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS,
+					      &reg32);
+			*aer = (reg32 & PCI_ERR_ROOT_AER_IRQ) >> 27;
+			nvec = max(nvec, *aer + 1);
+		}
+	}
+#endif
+
+	if (mask & PCIE_PORT_SERVICE_DPC) {
+		pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
+		if (pos) {
+			pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP,
+					     &reg16);
+			*dpc = reg16 & PCI_EXP_DPC_IRQ;
+			nvec = max(nvec, *dpc + 1);
+		}
+	}
+
+	return nvec;
+}
+
+/**
+ * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode
+ * for given port
+ * @dev: PCI Express port to handle
+ * @irqs: Array of interrupt vectors to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: 0 on success, error code on failure
+ */
+static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
+{
+	int nr_entries, nvec, pcie_irq;
+	u32 pme = 0, aer = 0, dpc = 0;
+
+	/* Allocate the maximum possible number of MSI/MSI-X vectors */
+	nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES,
+			PCI_IRQ_MSIX | PCI_IRQ_MSI);
+	if (nr_entries < 0)
+		return nr_entries;
+
+	/* See how many and which Interrupt Message Numbers we actually use */
+	nvec = pcie_message_numbers(dev, mask, &pme, &aer, &dpc);
+	if (nvec > nr_entries) {
+		pci_free_irq_vectors(dev);
+		return -EIO;
+	}
+
+	/*
+	 * If we allocated more than we need, free them and reallocate fewer.
+	 *
+	 * Reallocating may change the specific vectors we get, so
+	 * pci_irq_vector() must be done *after* the reallocation.
+	 *
+	 * If we're using MSI, hardware is *allowed* to change the Interrupt
+	 * Message Numbers when we free and reallocate the vectors, but we
+	 * assume it won't because we allocate enough vectors for the
+	 * biggest Message Number we found.
+	 */
+	if (nvec != nr_entries) {
+		pci_free_irq_vectors(dev);
+
+		nr_entries = pci_alloc_irq_vectors(dev, nvec, nvec,
+				PCI_IRQ_MSIX | PCI_IRQ_MSI);
+		if (nr_entries < 0)
+			return nr_entries;
+	}
+
+	/* PME, hotplug and bandwidth notification share an MSI/MSI-X vector */
+	if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP |
+		    PCIE_PORT_SERVICE_BWNOTIF)) {
+		pcie_irq = pci_irq_vector(dev, pme);
+		irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pcie_irq;
+		irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pcie_irq;
+		irqs[PCIE_PORT_SERVICE_BWNOTIF_SHIFT] = pcie_irq;
+	}
+
+	if (mask & PCIE_PORT_SERVICE_AER)
+		irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, aer);
+
+	if (mask & PCIE_PORT_SERVICE_DPC)
+		irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, dpc);
+
+	return 0;
+}
+
+/**
+ * pcie_init_service_irqs - initialize irqs for PCI Express port services
+ * @dev: PCI Express port to handle
+ * @irqs: Array of irqs to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: Interrupt mode associated with the port
+ */
+static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
+{
+	int ret, i;
+
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+		irqs[i] = -1;
+
+	/*
+	 * If we support PME but can't use MSI/MSI-X for it, we have to
+	 * fall back to INTx or other interrupts, e.g., a system shared
+	 * interrupt.
+	 */
+	if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi())
+		goto legacy_irq;
+
+	/* Try to use MSI-X or MSI if supported */
+	if (pcie_port_enable_irq_vec(dev, irqs, mask) == 0)
+		return 0;
+
+legacy_irq:
+	/* fall back to legacy IRQ */
+	ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+	if (ret < 0)
+		return -ENODEV;
+
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+		irqs[i] = pci_irq_vector(dev, 0);
+
+	return 0;
+}
+
+/**
+ * get_port_device_capability - discover capabilities of a PCI Express port
+ * @dev: PCI Express port to examine
+ *
+ * The capabilities are read from the port's PCI Express configuration registers
+ * as described in PCI Express Base Specification 1.0a sections 7.8.2, 7.8.9 and
+ * 7.9 - 7.11.
+ *
+ * Return value: Bitmask of discovered port capabilities
+ */
+static int get_port_device_capability(struct pci_dev *dev)
+{
+	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+	int services = 0;
+
+	if (dev->is_hotplug_bridge &&
+	    (pcie_ports_native || host->native_pcie_hotplug)) {
+		services |= PCIE_PORT_SERVICE_HP;
+
+		/*
+		 * Disable hot-plug interrupts in case they have been enabled
+		 * by the BIOS and the hot-plug service driver is not loaded.
+		 */
+		pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
+			  PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
+	}
+
+#ifdef CONFIG_PCIEAER
+	if (dev->aer_cap && pci_aer_available() &&
+	    (pcie_ports_native || host->native_aer))
+		services |= PCIE_PORT_SERVICE_AER;
+#endif
+
+	/* Root Ports and Root Complex Event Collectors may generate PMEs */
+	if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	     pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC) &&
+	    (pcie_ports_native || host->native_pme)) {
+		services |= PCIE_PORT_SERVICE_PME;
+
+		/*
+		 * Disable PME interrupt on this port in case it's been enabled
+		 * by the BIOS (the PME service driver will enable it when
+		 * necessary).
+		 */
+		pcie_pme_interrupt_enable(dev, false);
+	}
+
+	/*
+	 * With dpc-native, allow Linux to use DPC even if it doesn't have
+	 * permission to use AER.
+	 */
+	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
+	    pci_aer_available() &&
+	    (pcie_ports_dpc_native || (services & PCIE_PORT_SERVICE_AER)))
+		services |= PCIE_PORT_SERVICE_DPC;
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
+	    pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
+		u32 linkcap;
+
+		pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &linkcap);
+		if (linkcap & PCI_EXP_LNKCAP_LBNC)
+			services |= PCIE_PORT_SERVICE_BWNOTIF;
+	}
+
+	return services;
+}
+
+/**
+ * pcie_device_init - allocate and initialize PCI Express port service device
+ * @pdev: PCI Express port to associate the service device with
+ * @service: Type of service to associate with the service device
+ * @irq: Interrupt vector to associate with the service device
+ */
+static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
+{
+	int retval;
+	struct pcie_device *pcie;
+	struct device *device;
+
+	pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+	pcie->port = pdev;
+	pcie->irq = irq;
+	pcie->service = service;
+
+	/* Initialize generic device interface */
+	device = &pcie->device;
+	device->bus = &pcie_port_bus_type;
+	device->release = release_pcie_device;	/* callback to free pcie dev */
+	dev_set_name(device, "%s:pcie%03x",
+		     pci_name(pdev),
+		     get_descriptor_id(pci_pcie_type(pdev), service));
+	device->parent = &pdev->dev;
+	device_enable_async_suspend(device);
+
+	retval = device_register(device);
+	if (retval) {
+		put_device(device);
+		return retval;
+	}
+
+	pm_runtime_no_callbacks(device);
+
+	return 0;
+}
+
+/**
+ * pcie_port_device_register - register PCI Express port
+ * @dev: PCI Express port to register
+ *
+ * Allocate the port extension structure and register services associated with
+ * the port.
+ */
+int pcie_port_device_register(struct pci_dev *dev)
+{
+	int status, capabilities, i, nr_service;
+	int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
+
+	/* Enable PCI Express port device */
+	status = pci_enable_device(dev);
+	if (status)
+		return status;
+
+	/* Get and check PCI Express port services */
+	capabilities = get_port_device_capability(dev);
+	if (!capabilities)
+		return 0;
+
+	pci_set_master(dev);
+	/*
+	 * Initialize service irqs. Don't use service devices that
+	 * require interrupts if there is no way to generate them.
+	 * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
+	 * that can be used in the absence of irqs.  Allow them to determine
+	 * if that is to be used.
+	 */
+	status = pcie_init_service_irqs(dev, irqs, capabilities);
+	if (status) {
+		capabilities &= PCIE_PORT_SERVICE_HP;
+		if (!capabilities)
+			goto error_disable;
+	}
+
+	/* Allocate child services if any */
+	status = -ENODEV;
+	nr_service = 0;
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+		int service = 1 << i;
+		if (!(capabilities & service))
+			continue;
+		if (!pcie_device_init(dev, service, irqs[i]))
+			nr_service++;
+	}
+	if (!nr_service)
+		goto error_cleanup_irqs;
+
+	return 0;
+
+error_cleanup_irqs:
+	pci_free_irq_vectors(dev);
+error_disable:
+	pci_disable_device(dev);
+	return status;
+}
+
+typedef int (*pcie_callback_t)(struct pcie_device *);
+
+int pcie_port_device_iter(struct device *dev, void *data)
+{
+	struct pcie_port_service_driver *service_driver;
+	size_t offset = *(size_t *)data;
+	pcie_callback_t cb;
+
+	if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
+		service_driver = to_service_driver(dev->driver);
+		cb = *(pcie_callback_t *)((void *)service_driver + offset);
+		if (cb)
+			return cb(to_pcie_device(dev));
+	}
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * pcie_port_device_suspend - suspend port services associated with a PCIe port
+ * @dev: PCI Express port to handle
+ */
+int pcie_port_device_suspend(struct device *dev)
+{
+	size_t off = offsetof(struct pcie_port_service_driver, suspend);
+	return device_for_each_child(dev, &off, pcie_port_device_iter);
+}
+
+int pcie_port_device_resume_noirq(struct device *dev)
+{
+	size_t off = offsetof(struct pcie_port_service_driver, resume_noirq);
+	return device_for_each_child(dev, &off, pcie_port_device_iter);
+}
+
+/**
+ * pcie_port_device_resume - resume port services associated with a PCIe port
+ * @dev: PCI Express port to handle
+ */
+int pcie_port_device_resume(struct device *dev)
+{
+	size_t off = offsetof(struct pcie_port_service_driver, resume);
+	return device_for_each_child(dev, &off, pcie_port_device_iter);
+}
+
+/**
+ * pcie_port_device_runtime_suspend - runtime suspend port services
+ * @dev: PCI Express port to handle
+ */
+int pcie_port_device_runtime_suspend(struct device *dev)
+{
+	size_t off = offsetof(struct pcie_port_service_driver, runtime_suspend);
+	return device_for_each_child(dev, &off, pcie_port_device_iter);
+}
+
+/**
+ * pcie_port_device_runtime_resume - runtime resume port services
+ * @dev: PCI Express port to handle
+ */
+int pcie_port_device_runtime_resume(struct device *dev)
+{
+	size_t off = offsetof(struct pcie_port_service_driver, runtime_resume);
+	return device_for_each_child(dev, &off, pcie_port_device_iter);
+}
+#endif /* PM */
+
+static int remove_iter(struct device *dev, void *data)
+{
+	if (dev->bus == &pcie_port_bus_type)
+		device_unregister(dev);
+	return 0;
+}
+
+static int find_service_iter(struct device *device, void *data)
+{
+	struct pcie_port_service_driver *service_driver;
+	struct portdrv_service_data *pdrvs;
+	u32 service;
+
+	pdrvs = (struct portdrv_service_data *) data;
+	service = pdrvs->service;
+
+	if (device->bus == &pcie_port_bus_type && device->driver) {
+		service_driver = to_service_driver(device->driver);
+		if (service_driver->service == service) {
+			pdrvs->drv = service_driver;
+			pdrvs->dev = device;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * pcie_port_find_device - find the struct device
+ * @dev: PCI Express port the service is associated with
+ * @service: For the service to find
+ *
+ * Find the struct device associated with given service on a pci_dev
+ */
+struct device *pcie_port_find_device(struct pci_dev *dev,
+				      u32 service)
+{
+	struct device *device;
+	struct portdrv_service_data pdrvs;
+
+	pdrvs.dev = NULL;
+	pdrvs.service = service;
+	device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
+
+	device = pdrvs.dev;
+	return device;
+}
+EXPORT_SYMBOL_GPL(pcie_port_find_device);
+
+/**
+ * pcie_port_device_remove - unregister PCI Express port service devices
+ * @dev: PCI Express port the service devices to unregister are associated with
+ *
+ * Remove PCI Express port service devices associated with given port and
+ * disable MSI-X or MSI for the port.
+ */
+void pcie_port_device_remove(struct pci_dev *dev)
+{
+	device_for_each_child(&dev->dev, NULL, remove_iter);
+	pci_free_irq_vectors(dev);
+	pci_disable_device(dev);
+}
+
+/**
+ * pcie_port_probe_service - probe driver for given PCI Express port service
+ * @dev: PCI Express port service device to probe against
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * whenever match is found between the driver and a port service device.
+ */
+static int pcie_port_probe_service(struct device *dev)
+{
+	struct pcie_device *pciedev;
+	struct pcie_port_service_driver *driver;
+	int status;
+
+	if (!dev || !dev->driver)
+		return -ENODEV;
+
+	driver = to_service_driver(dev->driver);
+	if (!driver || !driver->probe)
+		return -ENODEV;
+
+	pciedev = to_pcie_device(dev);
+	status = driver->probe(pciedev);
+	if (status)
+		return status;
+
+	get_device(dev);
+	return 0;
+}
+
+/**
+ * pcie_port_remove_service - detach driver from given PCI Express port service
+ * @dev: PCI Express port service device to handle
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * when device_unregister() is called for the port service device associated
+ * with the driver.
+ */
+static int pcie_port_remove_service(struct device *dev)
+{
+	struct pcie_device *pciedev;
+	struct pcie_port_service_driver *driver;
+
+	if (!dev || !dev->driver)
+		return 0;
+
+	pciedev = to_pcie_device(dev);
+	driver = to_service_driver(dev->driver);
+	if (driver && driver->remove) {
+		driver->remove(pciedev);
+		put_device(dev);
+	}
+	return 0;
+}
+
+/**
+ * pcie_port_shutdown_service - shut down given PCI Express port service
+ * @dev: PCI Express port service device to handle
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * when device_shutdown() is called for the port service device associated
+ * with the driver.
+ */
+static void pcie_port_shutdown_service(struct device *dev) {}
+
+/**
+ * pcie_port_service_register - register PCI Express port service driver
+ * @new: PCI Express port service driver to register
+ */
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+{
+	if (pcie_ports_disabled)
+		return -ENODEV;
+
+	new->driver.name = new->name;
+	new->driver.bus = &pcie_port_bus_type;
+	new->driver.probe = pcie_port_probe_service;
+	new->driver.remove = pcie_port_remove_service;
+	new->driver.shutdown = pcie_port_shutdown_service;
+
+	return driver_register(&new->driver);
+}
+EXPORT_SYMBOL(pcie_port_service_register);
+
+/**
+ * pcie_port_service_unregister - unregister PCI Express port service driver
+ * @drv: PCI Express port service driver to unregister
+ */
+void pcie_port_service_unregister(struct pcie_port_service_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(pcie_port_service_unregister);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
new file mode 100644
index 000000000..7f8788a97
--- /dev/null
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Purpose:	PCI Express Port Bus Driver
+ * Author:	Tom Nguyen <tom.l.nguyen@intel.com>
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/init.h>
+#include <linux/aer.h>
+#include <linux/dmi.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+/* If this switch is set, PCIe port native services should not be enabled. */
+bool pcie_ports_disabled;
+
+/*
+ * If the user specified "pcie_ports=native", use the PCIe services regardless
+ * of whether the platform has given us permission.  On ACPI systems, this
+ * means we ignore _OSC.
+ */
+bool pcie_ports_native;
+
+/*
+ * If the user specified "pcie_ports=dpc-native", use the Linux DPC PCIe
+ * service even if the platform hasn't given us permission.
+ */
+bool pcie_ports_dpc_native;
+
+static int __init pcie_port_setup(char *str)
+{
+	if (!strncmp(str, "compat", 6))
+		pcie_ports_disabled = true;
+	else if (!strncmp(str, "native", 6))
+		pcie_ports_native = true;
+	else if (!strncmp(str, "dpc-native", 10))
+		pcie_ports_dpc_native = true;
+
+	return 1;
+}
+__setup("pcie_ports=", pcie_port_setup);
+
+/* global data */
+
+#ifdef CONFIG_PM
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+	if (!to_pci_dev(dev)->bridge_d3)
+		return -EBUSY;
+
+	return pcie_port_device_runtime_suspend(dev);
+}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+	/*
+	 * Assume the PCI core has set bridge_d3 whenever it thinks the port
+	 * should be good to go to D3.  Everything else, including moving
+	 * the port to D3, is handled by the PCI core.
+	 */
+	return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
+static const struct dev_pm_ops pcie_portdrv_pm_ops = {
+	.suspend	= pcie_port_device_suspend,
+	.resume_noirq	= pcie_port_device_resume_noirq,
+	.resume		= pcie_port_device_resume,
+	.freeze		= pcie_port_device_suspend,
+	.thaw		= pcie_port_device_resume,
+	.poweroff	= pcie_port_device_suspend,
+	.restore_noirq	= pcie_port_device_resume_noirq,
+	.restore	= pcie_port_device_resume,
+	.runtime_suspend = pcie_port_runtime_suspend,
+	.runtime_resume	= pcie_port_device_runtime_resume,
+	.runtime_idle	= pcie_port_runtime_idle,
+};
+
+#define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
+
+#else /* !PM */
+
+#define PCIE_PORTDRV_PM_OPS	NULL
+#endif /* !PM */
+
+/*
+ * pcie_portdrv_probe - Probe PCI-Express port devices
+ * @dev: PCI-Express port device being probed
+ *
+ * If detected invokes the pcie_port_device_register() method for
+ * this port device.
+ *
+ */
+static int pcie_portdrv_probe(struct pci_dev *dev,
+					const struct pci_device_id *id)
+{
+	int type = pci_pcie_type(dev);
+	int status;
+
+	if (!pci_is_pcie(dev) ||
+	    ((type != PCI_EXP_TYPE_ROOT_PORT) &&
+	     (type != PCI_EXP_TYPE_UPSTREAM) &&
+	     (type != PCI_EXP_TYPE_DOWNSTREAM) &&
+	     (type != PCI_EXP_TYPE_RC_EC)))
+		return -ENODEV;
+
+	if (type == PCI_EXP_TYPE_RC_EC)
+		pcie_link_rcec(dev);
+
+	status = pcie_port_device_register(dev);
+	if (status)
+		return status;
+
+	pci_save_state(dev);
+
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE |
+					   DPM_FLAG_SMART_SUSPEND);
+
+	if (pci_bridge_d3_possible(dev)) {
+		/*
+		 * Keep the port resumed 100ms to make sure things like
+		 * config space accesses from userspace (lspci) will not
+		 * cause the port to repeatedly suspend and resume.
+		 */
+		pm_runtime_set_autosuspend_delay(&dev->dev, 100);
+		pm_runtime_use_autosuspend(&dev->dev);
+		pm_runtime_mark_last_busy(&dev->dev);
+		pm_runtime_put_autosuspend(&dev->dev);
+		pm_runtime_allow(&dev->dev);
+	}
+
+	return 0;
+}
+
+static void pcie_portdrv_remove(struct pci_dev *dev)
+{
+	if (pci_bridge_d3_possible(dev)) {
+		pm_runtime_forbid(&dev->dev);
+		pm_runtime_get_noresume(&dev->dev);
+		pm_runtime_dont_use_autosuspend(&dev->dev);
+	}
+
+	pcie_port_device_remove(dev);
+}
+
+static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
+					pci_channel_state_t error)
+{
+	if (error == pci_channel_io_frozen)
+		return PCI_ERS_RESULT_NEED_RESET;
+	return PCI_ERS_RESULT_CAN_RECOVER;
+}
+
+static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
+{
+	size_t off = offsetof(struct pcie_port_service_driver, slot_reset);
+	device_for_each_child(&dev->dev, &off, pcie_port_device_iter);
+
+	pci_restore_state(dev);
+	pci_save_state(dev);
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev)
+{
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/*
+ * LINUX Device Driver Model
+ */
+static const struct pci_device_id port_pci_ids[] = {
+	/* handle any PCI-Express port */
+	{ PCI_DEVICE_CLASS(PCI_CLASS_BRIDGE_PCI_NORMAL, ~0) },
+	/* subtractive decode PCI-to-PCI bridge, class type is 060401h */
+	{ PCI_DEVICE_CLASS(PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE, ~0) },
+	/* handle any Root Complex Event Collector */
+	{ PCI_DEVICE_CLASS(((PCI_CLASS_SYSTEM_RCEC << 8) | 0x00), ~0) },
+	{ },
+};
+
+static const struct pci_error_handlers pcie_portdrv_err_handler = {
+	.error_detected = pcie_portdrv_error_detected,
+	.slot_reset = pcie_portdrv_slot_reset,
+	.mmio_enabled = pcie_portdrv_mmio_enabled,
+};
+
+static struct pci_driver pcie_portdriver = {
+	.name		= "pcieport",
+	.id_table	= &port_pci_ids[0],
+
+	.probe		= pcie_portdrv_probe,
+	.remove		= pcie_portdrv_remove,
+	.shutdown	= pcie_portdrv_remove,
+
+	.err_handler	= &pcie_portdrv_err_handler,
+
+	.driver_managed_dma = true,
+
+	.driver.pm	= PCIE_PORTDRV_PM_OPS,
+};
+
+static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
+{
+	pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
+		  d->ident);
+	pcie_pme_disable_msi();
+	return 0;
+}
+
+static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
+	/*
+	 * Boxes that should not use MSI for PCIe PME signaling.
+	 */
+	{
+	 .callback = dmi_pcie_pme_disable_msi,
+	 .ident = "MSI Wind U-100",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR,
+				"MICRO-STAR INTERNATIONAL CO., LTD"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
+		     },
+	 },
+	 {}
+};
+
+static void __init pcie_init_services(void)
+{
+	pcie_aer_init();
+	pcie_pme_init();
+	pcie_dpc_init();
+	pcie_hp_init();
+}
+
+static int __init pcie_portdrv_init(void)
+{
+	if (pcie_ports_disabled)
+		return -EACCES;
+
+	pcie_init_services();
+	dmi_check_system(pcie_portdrv_dmi_table);
+
+	return pci_register_driver(&pcie_portdriver);
+}
+device_initcall(pcie_portdrv_init);
diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
new file mode 100644
index 000000000..b4e5f5534
--- /dev/null
+++ b/drivers/pci/pcie/ptm.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Express Precision Time Measurement
+ * Copyright (c) 2016, Intel Corporation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include "../pci.h"
+
+/*
+ * If the next upstream device supports PTM, return it; otherwise return
+ * NULL.  PTM Messages are local, so both link partners must support it.
+ */
+static struct pci_dev *pci_upstream_ptm(struct pci_dev *dev)
+{
+	struct pci_dev *ups = pci_upstream_bridge(dev);
+
+	/*
+	 * Switch Downstream Ports are not permitted to have a PTM
+	 * capability; their PTM behavior is controlled by the Upstream
+	 * Port (PCIe r5.0, sec 7.9.16), so if the upstream bridge is a
+	 * Switch Downstream Port, look up one more level.
+	 */
+	if (ups && pci_pcie_type(ups) == PCI_EXP_TYPE_DOWNSTREAM)
+		ups = pci_upstream_bridge(ups);
+
+	if (ups && ups->ptm_cap)
+		return ups;
+
+	return NULL;
+}
+
+/*
+ * Find the PTM Capability (if present) and extract the information we need
+ * to use it.
+ */
+void pci_ptm_init(struct pci_dev *dev)
+{
+	u16 ptm;
+	u32 cap;
+	struct pci_dev *ups;
+
+	if (!pci_is_pcie(dev))
+		return;
+
+	ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
+	if (!ptm)
+		return;
+
+	dev->ptm_cap = ptm;
+	pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_PTM, sizeof(u32));
+
+	pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
+	dev->ptm_granularity = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
+
+	/*
+	 * Per the spec recommendation (PCIe r6.0, sec 7.9.15.3), select the
+	 * furthest upstream Time Source as the PTM Root.  For Endpoints,
+	 * "the Effective Granularity is the maximum Local Clock Granularity
+	 * reported by the PTM Root and all intervening PTM Time Sources."
+	 */
+	ups = pci_upstream_ptm(dev);
+	if (ups) {
+		if (ups->ptm_granularity == 0)
+			dev->ptm_granularity = 0;
+		else if (ups->ptm_granularity > dev->ptm_granularity)
+			dev->ptm_granularity = ups->ptm_granularity;
+	} else if (cap & PCI_PTM_CAP_ROOT) {
+		dev->ptm_root = 1;
+	} else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
+
+		/*
+		 * Per sec 7.9.15.3, this should be the Local Clock
+		 * Granularity of the associated Time Source.  But it
+		 * doesn't say how to find that Time Source.
+		 */
+		dev->ptm_granularity = 0;
+	}
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	    pci_pcie_type(dev) == PCI_EXP_TYPE_UPSTREAM)
+		pci_enable_ptm(dev, NULL);
+}
+
+void pci_save_ptm_state(struct pci_dev *dev)
+{
+	u16 ptm = dev->ptm_cap;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	if (!ptm)
+		return;
+
+	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_PTM);
+	if (!save_state)
+		return;
+
+	cap = (u32 *)&save_state->cap.data[0];
+	pci_read_config_dword(dev, ptm + PCI_PTM_CTRL, cap);
+}
+
+void pci_restore_ptm_state(struct pci_dev *dev)
+{
+	u16 ptm = dev->ptm_cap;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	if (!ptm)
+		return;
+
+	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_PTM);
+	if (!save_state)
+		return;
+
+	cap = (u32 *)&save_state->cap.data[0];
+	pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, *cap);
+}
+
+/* Enable PTM in the Control register if possible */
+static int __pci_enable_ptm(struct pci_dev *dev)
+{
+	u16 ptm = dev->ptm_cap;
+	struct pci_dev *ups;
+	u32 ctrl;
+
+	if (!ptm)
+		return -EINVAL;
+
+	/*
+	 * A device uses local PTM Messages to request time information
+	 * from a PTM Root that's farther upstream.  Every device along the
+	 * path must support PTM and have it enabled so it can handle the
+	 * messages.  Therefore, if this device is not a PTM Root, the
+	 * upstream link partner must have PTM enabled before we can enable
+	 * PTM.
+	 */
+	if (!dev->ptm_root) {
+		ups = pci_upstream_ptm(dev);
+		if (!ups || !ups->ptm_enabled)
+			return -EINVAL;
+	}
+
+	pci_read_config_dword(dev, ptm + PCI_PTM_CTRL, &ctrl);
+
+	ctrl |= PCI_PTM_CTRL_ENABLE;
+	ctrl &= ~PCI_PTM_GRANULARITY_MASK;
+	ctrl |= dev->ptm_granularity << 8;
+	if (dev->ptm_root)
+		ctrl |= PCI_PTM_CTRL_ROOT;
+
+	pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
+	return 0;
+}
+
+/**
+ * pci_enable_ptm() - Enable Precision Time Measurement
+ * @dev: PCI device
+ * @granularity: pointer to return granularity
+ *
+ * Enable Precision Time Measurement for @dev.  If successful and
+ * @granularity is non-NULL, return the Effective Granularity.
+ *
+ * Return: zero if successful, or -EINVAL if @dev lacks a PTM Capability or
+ * is not a PTM Root and lacks an upstream path of PTM-enabled devices.
+ */
+int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
+{
+	int rc;
+	char clock_desc[8];
+
+	rc = __pci_enable_ptm(dev);
+	if (rc)
+		return rc;
+
+	dev->ptm_enabled = 1;
+
+	if (granularity)
+		*granularity = dev->ptm_granularity;
+
+	switch (dev->ptm_granularity) {
+	case 0:
+		snprintf(clock_desc, sizeof(clock_desc), "unknown");
+		break;
+	case 255:
+		snprintf(clock_desc, sizeof(clock_desc), ">254ns");
+		break;
+	default:
+		snprintf(clock_desc, sizeof(clock_desc), "%uns",
+			 dev->ptm_granularity);
+		break;
+	}
+	pci_info(dev, "PTM enabled%s, %s granularity\n",
+		 dev->ptm_root ? " (root)" : "", clock_desc);
+
+	return 0;
+}
+EXPORT_SYMBOL(pci_enable_ptm);
+
+static void __pci_disable_ptm(struct pci_dev *dev)
+{
+	u16 ptm = dev->ptm_cap;
+	u32 ctrl;
+
+	if (!ptm)
+		return;
+
+	pci_read_config_dword(dev, ptm + PCI_PTM_CTRL, &ctrl);
+	ctrl &= ~(PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT);
+	pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
+}
+
+/**
+ * pci_disable_ptm() - Disable Precision Time Measurement
+ * @dev: PCI device
+ *
+ * Disable Precision Time Measurement for @dev.
+ */
+void pci_disable_ptm(struct pci_dev *dev)
+{
+	if (dev->ptm_enabled) {
+		__pci_disable_ptm(dev);
+		dev->ptm_enabled = 0;
+	}
+}
+EXPORT_SYMBOL(pci_disable_ptm);
+
+/*
+ * Disable PTM, but preserve dev->ptm_enabled so we silently re-enable it on
+ * resume if necessary.
+ */
+void pci_suspend_ptm(struct pci_dev *dev)
+{
+	if (dev->ptm_enabled)
+		__pci_disable_ptm(dev);
+}
+
+/* If PTM was enabled before suspend, re-enable it when resuming */
+void pci_resume_ptm(struct pci_dev *dev)
+{
+	if (dev->ptm_enabled)
+		__pci_enable_ptm(dev);
+}
+
+bool pcie_ptm_enabled(struct pci_dev *dev)
+{
+	if (!dev)
+		return false;
+
+	return dev->ptm_enabled;
+}
+EXPORT_SYMBOL(pcie_ptm_enabled);
diff --git a/drivers/pci/pcie/rcec.c b/drivers/pci/pcie/rcec.c
new file mode 100644
index 000000000..d0bcd141a
--- /dev/null
+++ b/drivers/pci/pcie/rcec.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Root Complex Event Collector Support
+ *
+ * Authors:
+ *  Sean V Kelley <sean.v.kelley@intel.com>
+ *  Qiuxu Zhuo <qiuxu.zhuo@intel.com>
+ *
+ * Copyright (C) 2020 Intel Corp.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+
+#include "../pci.h"
+
+struct walk_rcec_data {
+	struct pci_dev *rcec;
+	int (*user_callback)(struct pci_dev *dev, void *data);
+	void *user_data;
+};
+
+static bool rcec_assoc_rciep(struct pci_dev *rcec, struct pci_dev *rciep)
+{
+	unsigned long bitmap = rcec->rcec_ea->bitmap;
+	unsigned int devn;
+
+	/* An RCiEP found on a different bus in range */
+	if (rcec->bus->number != rciep->bus->number)
+		return true;
+
+	/* Same bus, so check bitmap */
+	for_each_set_bit(devn, &bitmap, 32)
+		if (devn == PCI_SLOT(rciep->devfn))
+			return true;
+
+	return false;
+}
+
+static int link_rcec_helper(struct pci_dev *dev, void *data)
+{
+	struct walk_rcec_data *rcec_data = data;
+	struct pci_dev *rcec = rcec_data->rcec;
+
+	if ((pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) &&
+	    rcec_assoc_rciep(rcec, dev)) {
+		dev->rcec = rcec;
+		pci_dbg(dev, "PME & error events signaled via %s\n",
+			pci_name(rcec));
+	}
+
+	return 0;
+}
+
+static int walk_rcec_helper(struct pci_dev *dev, void *data)
+{
+	struct walk_rcec_data *rcec_data = data;
+	struct pci_dev *rcec = rcec_data->rcec;
+
+	if ((pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) &&
+	    rcec_assoc_rciep(rcec, dev))
+		rcec_data->user_callback(dev, rcec_data->user_data);
+
+	return 0;
+}
+
+static void walk_rcec(int (*cb)(struct pci_dev *dev, void *data),
+		      void *userdata)
+{
+	struct walk_rcec_data *rcec_data = userdata;
+	struct pci_dev *rcec = rcec_data->rcec;
+	u8 nextbusn, lastbusn;
+	struct pci_bus *bus;
+	unsigned int bnr;
+
+	if (!rcec->rcec_ea)
+		return;
+
+	/* Walk own bus for bitmap based association */
+	pci_walk_bus(rcec->bus, cb, rcec_data);
+
+	nextbusn = rcec->rcec_ea->nextbusn;
+	lastbusn = rcec->rcec_ea->lastbusn;
+
+	/* All RCiEP devices are on the same bus as the RCEC */
+	if (nextbusn == 0xff && lastbusn == 0x00)
+		return;
+
+	for (bnr = nextbusn; bnr <= lastbusn; bnr++) {
+		/* No association indicated (PCIe 5.0-1, 7.9.10.3) */
+		if (bnr == rcec->bus->number)
+			continue;
+
+		bus = pci_find_bus(pci_domain_nr(rcec->bus), bnr);
+		if (!bus)
+			continue;
+
+		/* Find RCiEP devices on the given bus ranges */
+		pci_walk_bus(bus, cb, rcec_data);
+	}
+}
+
+/**
+ * pcie_link_rcec - Link RCiEP devices associated with RCEC.
+ * @rcec: RCEC whose RCiEP devices should be linked.
+ *
+ * Link the given RCEC to each RCiEP device found.
+ */
+void pcie_link_rcec(struct pci_dev *rcec)
+{
+	struct walk_rcec_data rcec_data;
+
+	if (!rcec->rcec_ea)
+		return;
+
+	rcec_data.rcec = rcec;
+	rcec_data.user_callback = NULL;
+	rcec_data.user_data = NULL;
+
+	walk_rcec(link_rcec_helper, &rcec_data);
+}
+
+/**
+ * pcie_walk_rcec - Walk RCiEP devices associating with RCEC and call callback.
+ * @rcec:	RCEC whose RCiEP devices should be walked
+ * @cb:		Callback to be called for each RCiEP device found
+ * @userdata:	Arbitrary pointer to be passed to callback
+ *
+ * Walk the given RCEC. Call the callback on each RCiEP found.
+ *
+ * If @cb returns anything other than 0, break out.
+ */
+void pcie_walk_rcec(struct pci_dev *rcec, int (*cb)(struct pci_dev *, void *),
+		    void *userdata)
+{
+	struct walk_rcec_data rcec_data;
+
+	if (!rcec->rcec_ea)
+		return;
+
+	rcec_data.rcec = rcec;
+	rcec_data.user_callback = cb;
+	rcec_data.user_data = userdata;
+
+	walk_rcec(walk_rcec_helper, &rcec_data);
+}
+
+void pci_rcec_init(struct pci_dev *dev)
+{
+	struct rcec_ea *rcec_ea;
+	u32 rcec, hdr, busn;
+	u8 ver;
+
+	/* Only for Root Complex Event Collectors */
+	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC)
+		return;
+
+	rcec = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_RCEC);
+	if (!rcec)
+		return;
+
+	rcec_ea = kzalloc(sizeof(*rcec_ea), GFP_KERNEL);
+	if (!rcec_ea)
+		return;
+
+	pci_read_config_dword(dev, rcec + PCI_RCEC_RCIEP_BITMAP,
+			      &rcec_ea->bitmap);
+
+	/* Check whether RCEC BUSN register is present */
+	pci_read_config_dword(dev, rcec, &hdr);
+	ver = PCI_EXT_CAP_VER(hdr);
+	if (ver >= PCI_RCEC_BUSN_REG_VER) {
+		pci_read_config_dword(dev, rcec + PCI_RCEC_BUSN, &busn);
+		rcec_ea->nextbusn = PCI_RCEC_BUSN_NEXT(busn);
+		rcec_ea->lastbusn = PCI_RCEC_BUSN_LAST(busn);
+	} else {
+		/* Avoid later ver check by setting nextbusn */
+		rcec_ea->nextbusn = 0xff;
+		rcec_ea->lastbusn = 0x00;
+	}
+
+	dev->rcec_ea = rcec_ea;
+}
+
+void pci_rcec_exit(struct pci_dev *dev)
+{
+	kfree(dev->rcec_ea);
+	dev->rcec_ea = NULL;
+}