Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 301 insertions, 0 deletions

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
new file mode 100644
index 000000000..db17c3448
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Meson GXL and GXM USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* bits [31:27] are read-only */
+#define U2P_R0							0x0
+	#define U2P_R0_BYPASS_SEL				BIT(0)
+	#define U2P_R0_BYPASS_DM_EN				BIT(1)
+	#define U2P_R0_BYPASS_DP_EN				BIT(2)
+	#define U2P_R0_TXBITSTUFF_ENH				BIT(3)
+	#define U2P_R0_TXBITSTUFF_EN				BIT(4)
+	#define U2P_R0_DM_PULLDOWN				BIT(5)
+	#define U2P_R0_DP_PULLDOWN				BIT(6)
+	#define U2P_R0_DP_VBUS_VLD_EXT_SEL			BIT(7)
+	#define U2P_R0_DP_VBUS_VLD_EXT				BIT(8)
+	#define U2P_R0_ADP_PRB_EN				BIT(9)
+	#define U2P_R0_ADP_DISCHARGE				BIT(10)
+	#define U2P_R0_ADP_CHARGE				BIT(11)
+	#define U2P_R0_DRV_VBUS					BIT(12)
+	#define U2P_R0_ID_PULLUP				BIT(13)
+	#define U2P_R0_LOOPBACK_EN_B				BIT(14)
+	#define U2P_R0_OTG_DISABLE				BIT(15)
+	#define U2P_R0_COMMON_ONN				BIT(16)
+	#define U2P_R0_FSEL_MASK				GENMASK(19, 17)
+	#define U2P_R0_REF_CLK_SEL_MASK				GENMASK(21, 20)
+	#define U2P_R0_POWER_ON_RESET				BIT(22)
+	#define U2P_R0_V_ATE_TEST_EN_B_MASK			GENMASK(24, 23)
+	#define U2P_R0_ID_SET_ID_DQ				BIT(25)
+	#define U2P_R0_ATE_RESET				BIT(26)
+	#define U2P_R0_FSV_MINUS				BIT(27)
+	#define U2P_R0_FSV_PLUS					BIT(28)
+	#define U2P_R0_BYPASS_DM_DATA				BIT(29)
+	#define U2P_R0_BYPASS_DP_DATA				BIT(30)
+
+#define U2P_R1							0x4
+	#define U2P_R1_BURN_IN_TEST				BIT(0)
+	#define U2P_R1_ACA_ENABLE				BIT(1)
+	#define U2P_R1_DCD_ENABLE				BIT(2)
+	#define U2P_R1_VDAT_SRC_EN_B				BIT(3)
+	#define U2P_R1_VDAT_DET_EN_B				BIT(4)
+	#define U2P_R1_CHARGES_SEL				BIT(5)
+	#define U2P_R1_TX_PREEMP_PULSE_TUNE			BIT(6)
+	#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK			GENMASK(8, 7)
+	#define U2P_R1_TX_RES_TUNE_MASK				GENMASK(10, 9)
+	#define U2P_R1_TX_RISE_TUNE_MASK			GENMASK(12, 11)
+	#define U2P_R1_TX_VREF_TUNE_MASK			GENMASK(16, 13)
+	#define U2P_R1_TX_FSLS_TUNE_MASK			GENMASK(20, 17)
+	#define U2P_R1_TX_HSXV_TUNE_MASK			GENMASK(22, 21)
+	#define U2P_R1_OTG_TUNE_MASK				GENMASK(25, 23)
+	#define U2P_R1_SQRX_TUNE_MASK				GENMASK(28, 26)
+	#define U2P_R1_COMP_DIS_TUNE_MASK			GENMASK(31, 29)
+
+/* bits [31:14] are read-only */
+#define U2P_R2							0x8
+	#define U2P_R2_TESTDATA_IN_MASK				GENMASK(7, 0)
+	#define U2P_R2_TESTADDR_MASK				GENMASK(11, 8)
+	#define U2P_R2_TESTDATA_OUT_SEL				BIT(12)
+	#define U2P_R2_TESTCLK					BIT(13)
+	#define U2P_R2_TESTDATA_OUT_MASK			GENMASK(17, 14)
+	#define U2P_R2_ACA_PIN_RANGE_C				BIT(18)
+	#define U2P_R2_ACA_PIN_RANGE_B				BIT(19)
+	#define U2P_R2_ACA_PIN_RANGE_A				BIT(20)
+	#define U2P_R2_ACA_PIN_GND				BIT(21)
+	#define U2P_R2_ACA_PIN_FLOAT				BIT(22)
+	#define U2P_R2_CHARGE_DETECT				BIT(23)
+	#define U2P_R2_DEVICE_SESSION_VALID			BIT(24)
+	#define U2P_R2_ADP_PROBE				BIT(25)
+	#define U2P_R2_ADP_SENSE				BIT(26)
+	#define U2P_R2_SESSION_END				BIT(27)
+	#define U2P_R2_VBUS_VALID				BIT(28)
+	#define U2P_R2_B_VALID					BIT(29)
+	#define U2P_R2_A_VALID					BIT(30)
+	#define U2P_R2_ID_DIG					BIT(31)
+
+#define U2P_R3							0xc
+
+#define RESET_COMPLETE_TIME				500
+
+struct phy_meson_gxl_usb2_priv {
+	struct regmap		*regmap;
+	enum phy_mode		mode;
+	int			is_enabled;
+	struct clk		*clk;
+	struct reset_control	*reset;
+};
+
+static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = U2P_R3,
+};
+
+static int phy_meson_gxl_usb2_init(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		reset_control_rearm(priv->reset);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_exit(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(priv->clk);
+	reset_control_rearm(priv->reset);
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_reset(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->is_enabled) {
+		/* reset the PHY and wait until settings are stabilized */
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+				   U2P_R0_POWER_ON_RESET);
+		udelay(RESET_COMPLETE_TIME);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+				   0);
+		udelay(RESET_COMPLETE_TIME);
+	}
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
+				       enum phy_mode mode, int submode)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+	case PHY_MODE_USB_OTG:
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
+				   U2P_R0_DM_PULLDOWN);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
+				   U2P_R0_DP_PULLDOWN);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+				   U2P_R0_ID_PULLUP);
+		break;
+
+	case PHY_MODE_USB_DEVICE:
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
+				   0);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
+				   0);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+				   U2P_R0_ID_PULLUP);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	phy_meson_gxl_usb2_reset(phy);
+
+	priv->mode = mode;
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_power_off(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	priv->is_enabled = 0;
+
+	/* power off the PHY by putting it into reset mode */
+	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+			   U2P_R0_POWER_ON_RESET);
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_power_on(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	priv->is_enabled = 1;
+
+	/* power on the PHY by taking it out of reset mode */
+	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);
+
+	ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
+	if (ret) {
+		phy_meson_gxl_usb2_power_off(phy);
+
+		dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n",
+			priv->mode);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct phy_ops phy_meson_gxl_usb2_ops = {
+	.init		= phy_meson_gxl_usb2_init,
+	.exit		= phy_meson_gxl_usb2_exit,
+	.power_on	= phy_meson_gxl_usb2_power_on,
+	.power_off	= phy_meson_gxl_usb2_power_off,
+	.set_mode	= phy_meson_gxl_usb2_set_mode,
+	.reset		= phy_meson_gxl_usb2_reset,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy_meson_gxl_usb2_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* start in host mode */
+	priv->mode = PHY_MODE_USB_HOST;
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_meson_gxl_usb2_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk = devm_clk_get_optional(dev, "phy");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+
+		return ret;
+	}
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_gxl_usb2_of_match[] = {
+	{ .compatible = "amlogic,meson-gxl-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match);
+
+static struct platform_driver phy_meson_gxl_usb2_driver = {
+	.probe	= phy_meson_gxl_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-gxl-usb2",
+		.of_match_table	= phy_meson_gxl_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson_gxl_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver");
+MODULE_LICENSE("GPL v2");