diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/phy/broadcom | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | drivers/phy/broadcom/Kconfig | 117 | ||||
-rw-r--r-- | drivers/phy/broadcom/Makefile | 15 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-cygnus-pcie.c | 209 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-kona-usb2.c | 145 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns-usb2.c | 165 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns-usb3.c | 247 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns2-pcie.c | 89 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 417 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-sr-pcie.c | 302 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm-sr-usb.c | 338 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-bcm63xx-usbh.c | 457 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-sata.c | 860 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 436 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.c | 1055 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.h | 162 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb.c | 682 |
16 files changed, 5696 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig new file mode 100644 index 000000000..1d89a2fd9 --- /dev/null +++ b/drivers/phy/broadcom/Kconfig @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for Broadcom platforms +# +menu "PHY drivers for Broadcom platforms" + +config PHY_BCM63XX_USBH + tristate "BCM63xx USBH PHY driver" + depends on BMIPS_GENERIC || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the BCM63xx USBH PHY driver. + If unsure, say N. + +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + +config PHY_BCM_SR_USB + tristate "Broadcom Stingray USB PHY driver" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Stingray USB PHY + driver. It supports all versions of Superspeed and + Highspeed PHYs. + If unsure, say N. + +config BCM_KONA_USB2_PHY + tristate "Broadcom Kona USB2 PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the Broadcom Kona USB 2.0 PHY. + +config PHY_BCM_NS_USB2 + tristate "Broadcom Northstar USB 2.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 2.0 PHY connected to the USB + controller on Northstar family. + +config PHY_BCM_NS_USB3 + tristate "Broadcom Northstar USB 3.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + depends on MDIO_BUS + select GENERIC_PHY + help + Enable this to support Broadcom USB 3.0 PHY connected to the USB + controller on Northstar family. + +config PHY_NS2_PCIE + tristate "Broadcom Northstar2 PCIe PHY driver" + depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS) + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Northstar2 PCIe PHY. + If unsure, say N. + +config PHY_NS2_USB_DRD + tristate "Broadcom Northstar2 USB DRD PHY support" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + select EXTCON + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Northstar2 USB DRD PHY. + This driver initializes the PHY in either HOST or DEVICE mode. + The host or device configuration is read from device tree. + + If unsure, say N. + +config PHY_BRCM_SATA + tristate "Broadcom SATA PHY driver" + depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \ + ARCH_BCMBCA || COMPILE_TEST + depends on OF + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom SATA PHY. + If unsure, say N. + +config PHY_BRCM_USB + tristate "Broadcom STB USB PHY driver" + depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST + depends on OF + select GENERIC_PHY + select SOC_BRCMSTB if ARCH_BRCMSTB + default ARCH_BCMBCA || ARCH_BRCMSTB + help + Enable this to support the Broadcom STB USB PHY. + This driver is required by the USB XHCI, EHCI and OHCI + drivers. + If unsure, say N. + +config PHY_BCM_SR_PCIE + tristate "Broadcom Stingray PCIe PHY driver" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + select MFD_SYSCON + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Stingray PCIe PHY + If unsure, say N. + +endmenu diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile new file mode 100644 index 000000000..7024127f8 --- /dev/null +++ b/drivers/phy/broadcom/Makefile @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_BCM63XX_USBH) += phy-bcm63xx-usbh.o +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o +obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o +obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o +obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o +obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o +obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o +obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o + +phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o phy-brcm-usb-init-synopsys.o + +obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o +obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o diff --git a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c new file mode 100644 index 000000000..cc29b08e4 --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015 Broadcom Corporation + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define PCIE_CFG_OFFSET 0x00 +#define PCIE1_PHY_IDDQ_SHIFT 10 +#define PCIE0_PHY_IDDQ_SHIFT 2 + +enum cygnus_pcie_phy_id { + CYGNUS_PHY_PCIE0 = 0, + CYGNUS_PHY_PCIE1, + MAX_NUM_PHYS, +}; + +struct cygnus_pcie_phy_core; + +/** + * struct cygnus_pcie_phy - Cygnus PCIe PHY device + * @core: pointer to the Cygnus PCIe PHY core control + * @id: internal ID to identify the Cygnus PCIe PHY + * @phy: pointer to the kernel PHY device + */ +struct cygnus_pcie_phy { + struct cygnus_pcie_phy_core *core; + enum cygnus_pcie_phy_id id; + struct phy *phy; +}; + +/** + * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control + * @dev: pointer to device + * @base: base register + * @lock: mutex to protect access to individual PHYs + * @phys: pointer to Cygnus PHY device + */ +struct cygnus_pcie_phy_core { + struct device *dev; + void __iomem *base; + struct mutex lock; + struct cygnus_pcie_phy phys[MAX_NUM_PHYS]; +}; + +static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable) +{ + struct cygnus_pcie_phy_core *core = phy->core; + unsigned shift; + u32 val; + + mutex_lock(&core->lock); + + switch (phy->id) { + case CYGNUS_PHY_PCIE0: + shift = PCIE0_PHY_IDDQ_SHIFT; + break; + + case CYGNUS_PHY_PCIE1: + shift = PCIE1_PHY_IDDQ_SHIFT; + break; + + default: + mutex_unlock(&core->lock); + dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id); + return -EINVAL; + } + + if (enable) { + val = readl(core->base + PCIE_CFG_OFFSET); + val &= ~BIT(shift); + writel(val, core->base + PCIE_CFG_OFFSET); + /* + * Wait 50 ms for the PCIe Serdes to stabilize after the analog + * front end is brought up + */ + msleep(50); + } else { + val = readl(core->base + PCIE_CFG_OFFSET); + val |= BIT(shift); + writel(val, core->base + PCIE_CFG_OFFSET); + } + + mutex_unlock(&core->lock); + dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id, + enable ? "enabled" : "disabled"); + return 0; +} + +static int cygnus_pcie_phy_power_on(struct phy *p) +{ + struct cygnus_pcie_phy *phy = phy_get_drvdata(p); + + return cygnus_pcie_power_config(phy, true); +} + +static int cygnus_pcie_phy_power_off(struct phy *p) +{ + struct cygnus_pcie_phy *phy = phy_get_drvdata(p); + + return cygnus_pcie_power_config(phy, false); +} + +static const struct phy_ops cygnus_pcie_phy_ops = { + .power_on = cygnus_pcie_phy_power_on, + .power_off = cygnus_pcie_phy_power_off, + .owner = THIS_MODULE, +}; + +static int cygnus_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node, *child; + struct cygnus_pcie_phy_core *core; + struct phy_provider *provider; + unsigned cnt = 0; + int ret; + + if (of_get_child_count(node) == 0) { + dev_err(dev, "PHY no child node\n"); + return -ENODEV; + } + + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; + + core->dev = dev; + + core->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(core->base)) + return PTR_ERR(core->base); + + mutex_init(&core->lock); + + for_each_available_child_of_node(node, child) { + unsigned int id; + struct cygnus_pcie_phy *p; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property for %pOFn\n", + child); + ret = -EINVAL; + goto put_child; + } + + if (id >= MAX_NUM_PHYS) { + dev_err(dev, "invalid PHY id: %u\n", id); + ret = -EINVAL; + goto put_child; + } + + if (core->phys[id].phy) { + dev_err(dev, "duplicated PHY id: %u\n", id); + ret = -EINVAL; + goto put_child; + } + + p = &core->phys[id]; + p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops); + if (IS_ERR(p->phy)) { + dev_err(dev, "failed to create PHY\n"); + ret = PTR_ERR(p->phy); + goto put_child; + } + + p->core = core; + p->id = id; + phy_set_drvdata(p->phy, p); + cnt++; + } + + dev_set_drvdata(dev, core); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt); + + return 0; +put_child: + of_node_put(child); + return ret; +} + +static const struct of_device_id cygnus_pcie_phy_match_table[] = { + { .compatible = "brcm,cygnus-pcie-phy" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table); + +static struct platform_driver cygnus_pcie_phy_driver = { + .driver = { + .name = "cygnus-pcie-phy", + .of_match_table = cygnus_pcie_phy_match_table, + }, + .probe = cygnus_pcie_phy_probe, +}; +module_platform_driver(cygnus_pcie_phy_driver); + +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/broadcom/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c new file mode 100644 index 000000000..e9cc5f2cb --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-kona-usb2.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * phy-bcm-kona-usb2.c - Broadcom Kona USB2 Phy Driver + * + * Copyright (C) 2013 Linaro Limited + * Matt Porter <mporter@linaro.org> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define OTGCTL (0) +#define OTGCTL_OTGSTAT2 BIT(31) +#define OTGCTL_OTGSTAT1 BIT(30) +#define OTGCTL_PRST_N_SW BIT(11) +#define OTGCTL_HRESET_N BIT(10) +#define OTGCTL_UTMI_LINE_STATE1 BIT(9) +#define OTGCTL_UTMI_LINE_STATE0 BIT(8) + +#define P1CTL (8) +#define P1CTL_SOFT_RESET BIT(1) +#define P1CTL_NON_DRIVING BIT(0) + +struct bcm_kona_usb { + void __iomem *regs; +}; + +static void bcm_kona_usb_phy_power(struct bcm_kona_usb *phy, int on) +{ + u32 val; + + val = readl(phy->regs + OTGCTL); + if (on) { + /* Configure and power PHY */ + val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 | + OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0); + val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N; + } else { + val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N); + } + writel(val, phy->regs + OTGCTL); +} + +static int bcm_kona_usb_phy_init(struct phy *gphy) +{ + struct bcm_kona_usb *phy = phy_get_drvdata(gphy); + u32 val; + + /* Soft reset PHY */ + val = readl(phy->regs + P1CTL); + val &= ~P1CTL_NON_DRIVING; + val |= P1CTL_SOFT_RESET; + writel(val, phy->regs + P1CTL); + writel(val & ~P1CTL_SOFT_RESET, phy->regs + P1CTL); + /* Reset needs to be asserted for 2ms */ + mdelay(2); + writel(val | P1CTL_SOFT_RESET, phy->regs + P1CTL); + + return 0; +} + +static int bcm_kona_usb_phy_power_on(struct phy *gphy) +{ + struct bcm_kona_usb *phy = phy_get_drvdata(gphy); + + bcm_kona_usb_phy_power(phy, 1); + + return 0; +} + +static int bcm_kona_usb_phy_power_off(struct phy *gphy) +{ + struct bcm_kona_usb *phy = phy_get_drvdata(gphy); + + bcm_kona_usb_phy_power(phy, 0); + + return 0; +} + +static const struct phy_ops ops = { + .init = bcm_kona_usb_phy_init, + .power_on = bcm_kona_usb_phy_power_on, + .power_off = bcm_kona_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int bcm_kona_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm_kona_usb *phy; + struct phy *gphy; + struct phy_provider *phy_provider; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return PTR_ERR(phy->regs); + + platform_set_drvdata(pdev, phy); + + gphy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(gphy)) + return PTR_ERR(gphy); + + /* The Kona PHY supports an 8-bit wide UTMI interface */ + phy_set_bus_width(gphy, 8); + + phy_set_drvdata(gphy, phy); + + phy_provider = devm_of_phy_provider_register(dev, + of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id bcm_kona_usb2_dt_ids[] = { + { .compatible = "brcm,kona-usb2-phy" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, bcm_kona_usb2_dt_ids); + +static struct platform_driver bcm_kona_usb2_driver = { + .probe = bcm_kona_usb2_probe, + .driver = { + .name = "bcm-kona-usb2", + .of_match_table = bcm_kona_usb2_dt_ids, + }, +}; + +module_platform_driver(bcm_kona_usb2_driver); + +MODULE_ALIAS("platform:bcm-kona-usb2"); +MODULE_AUTHOR("Matt Porter <mporter@linaro.org>"); +MODULE_DESCRIPTION("BCM Kona USB 2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c new file mode 100644 index 000000000..6a36e187d --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Broadcom Northstar USB 2.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> + */ + +#include <linux/bcma/bcma.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +struct bcm_ns_usb2 { + struct device *dev; + struct clk *ref_clk; + struct phy *phy; + struct regmap *clkset; + void __iomem *base; + + /* Deprecated binding */ + void __iomem *dmu; +}; + +static int bcm_ns_usb2_phy_init(struct phy *phy) +{ + struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy); + struct device *dev = usb2->dev; + u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv; + int err = 0; + + err = clk_prepare_enable(usb2->ref_clk); + if (err < 0) { + dev_err(dev, "Failed to prepare ref clock: %d\n", err); + goto err_out; + } + + ref_clk_rate = clk_get_rate(usb2->ref_clk); + if (!ref_clk_rate) { + dev_err(dev, "Failed to get ref clock rate\n"); + err = -EINVAL; + goto err_clk_off; + } + + if (usb2->base) + usb2ctl = readl(usb2->base); + else + usb2ctl = readl(usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL); + + if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) { + usb_pll_pdiv = usb2ctl; + usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK; + usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT; + } else { + usb_pll_pdiv = 1 << 3; + } + + /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */ + usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate; + + /* Unlock DMU PLL settings with some magic value */ + if (usb2->clkset) + regmap_write(usb2->clkset, 0, 0x0000ea68); + else + writel(0x0000ea68, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY); + + /* Write USB 2.0 PLL control setting */ + usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK; + usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT; + if (usb2->base) + writel(usb2ctl, usb2->base); + else + writel(usb2ctl, usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL); + + /* Lock DMU PLL settings */ + if (usb2->clkset) + regmap_write(usb2->clkset, 0, 0x00000000); + else + writel(0x00000000, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY); + +err_clk_off: + clk_disable_unprepare(usb2->ref_clk); +err_out: + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb2_phy_init, + .owner = THIS_MODULE, +}; + +static int bcm_ns_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm_ns_usb2 *usb2; + struct phy_provider *phy_provider; + + usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL); + if (!usb2) + return -ENOMEM; + usb2->dev = dev; + + if (of_find_property(dev->of_node, "brcm,syscon-clkset", NULL)) { + usb2->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(usb2->base)) { + dev_err(dev, "Failed to map control reg\n"); + return PTR_ERR(usb2->base); + } + + usb2->clkset = syscon_regmap_lookup_by_phandle(dev->of_node, + "brcm,syscon-clkset"); + if (IS_ERR(usb2->clkset)) { + dev_err(dev, "Failed to lookup clkset regmap\n"); + return PTR_ERR(usb2->clkset); + } + } else { + usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu"); + if (IS_ERR(usb2->dmu)) { + dev_err(dev, "Failed to map DMU regs\n"); + return PTR_ERR(usb2->dmu); + } + + dev_warn(dev, "using deprecated DT binding\n"); + } + + usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk"); + if (IS_ERR(usb2->ref_clk)) { + dev_err_probe(dev, PTR_ERR(usb2->ref_clk), "failed to get ref clk\n"); + return PTR_ERR(usb2->ref_clk); + } + + usb2->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb2->phy)) + return PTR_ERR(usb2->phy); + + phy_set_drvdata(usb2->phy, usb2); + platform_set_drvdata(pdev, usb2); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id bcm_ns_usb2_id_table[] = { + { .compatible = "brcm,ns-usb2-phy", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table); + +static struct platform_driver bcm_ns_usb2_driver = { + .probe = bcm_ns_usb2_probe, + .driver = { + .name = "bcm_ns_usb2", + .of_match_table = bcm_ns_usb2_id_table, + }, +}; +module_platform_driver(bcm_ns_usb2_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c new file mode 100644 index 000000000..bbfad209c --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Broadcom Northstar USB 3.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> + * Copyright (C) 2016 Broadcom + * + * All magic values used for initialization (and related comments) were obtained + * from Broadcom's SDK: + * Copyright (c) Broadcom Corp, 2012 + */ + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iopoll.h> +#include <linux/mdio.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/slab.h> + +#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f +#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000 +#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040 +#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060 + +/* Registers of PLL30 block */ +#define BCM_NS_USB3_PLL_CONTROL 0x01 +#define BCM_NS_USB3_PLLA_CONTROL0 0x0a +#define BCM_NS_USB3_PLLA_CONTROL1 0x0b + +/* Registers of TX PMD block */ +#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01 + +/* Registers of PIPE block */ +#define BCM_NS_USB3_LFPS_CMP 0x02 +#define BCM_NS_USB3_LFPS_DEGLITCH 0x03 + +enum bcm_ns_family { + BCM_NS_UNKNOWN, + BCM_NS_AX, + BCM_NS_BX, +}; + +struct bcm_ns_usb3 { + struct device *dev; + enum bcm_ns_family family; + void __iomem *dmp; + struct mdio_device *mdiodev; + struct phy *phy; +}; + +static const struct of_device_id bcm_ns_usb3_id_table[] = { + { + .compatible = "brcm,ns-ax-usb3-phy", + .data = (int *)BCM_NS_AX, + }, + { + .compatible = "brcm,ns-bx-usb3-phy", + .data = (int *)BCM_NS_BX, + }, + {}, +}; + +static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value); + +static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* USB3 PLL Block */ + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); + if (err < 0) + return err; + + /* Assert Ana_Pllseq start */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000); + + /* Assert CML Divider ratio to 26 */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); + + /* Asserting PLL Reset */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000); + + /* Deaaserting PLL Reset */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + /* PLL frequency monitor enable */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000); + + /* PIPE Block */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PIPE_BLOCK); + + /* CMPMAX & CMPMINTH setting */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d); + + /* DEGLITCH MIN & MAX setting */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302); + + /* TXPMD block */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); + + /* Enabling SSC */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* PLL30 block */ + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); + if (err < 0) + return err; + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0); + + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c); + + /* Enable SSC */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); + + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3); + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + return 0; +} + +static int bcm_ns_usb3_phy_init(struct phy *phy) +{ + struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); + int err; + + /* Perform USB3 system soft reset */ + writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); + + switch (usb3->family) { + case BCM_NS_AX: + err = bcm_ns_usb3_phy_init_ns_ax(usb3); + break; + case BCM_NS_BX: + err = bcm_ns_usb3_phy_init_ns_bx(usb3); + break; + default: + WARN_ON(1); + err = -ENOTSUPP; + } + + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb3_phy_init, + .owner = THIS_MODULE, +}; + +/************************************************** + * MDIO driver code + **************************************************/ + +static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) +{ + struct mdio_device *mdiodev = usb3->mdiodev; + + return mdiodev_write(mdiodev, reg, value); +} + +static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + const struct of_device_id *of_id; + struct phy_provider *phy_provider; + struct device_node *syscon_np; + struct bcm_ns_usb3 *usb3; + struct resource res; + int err; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + usb3->mdiodev = mdiodev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0); + err = of_address_to_resource(syscon_np, 0, &res); + of_node_put(syscon_np); + if (err) + return err; + + usb3->dmp = devm_ioremap_resource(dev, &res); + if (IS_ERR(usb3->dmp)) + return PTR_ERR(usb3->dmp); + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct mdio_driver bcm_ns_usb3_mdio_driver = { + .mdiodrv = { + .driver = { + .name = "bcm_ns_mdio_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, + }, + .probe = bcm_ns_usb3_mdio_probe, +}; + +mdio_module_driver(bcm_ns_usb3_mdio_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); diff --git a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c new file mode 100644 index 000000000..2eaa41f8f --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2016 Broadcom + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/of_mdio.h> +#include <linux/mdio.h> +#include <linux/phy.h> +#include <linux/phy/phy.h> + +#define BLK_ADDR_REG_OFFSET 0x1f +#define PLL_AFE1_100MHZ_BLK 0x2100 +#define PLL_CLK_AMP_OFFSET 0x03 +#define PLL_CLK_AMP_2P05V 0x2b18 + +static int ns2_pci_phy_init(struct phy *p) +{ + struct mdio_device *mdiodev = phy_get_drvdata(p); + int rc; + + /* select the AFE 100MHz block page */ + rc = mdiodev_write(mdiodev, BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK); + if (rc) + goto err; + + /* set the 100 MHz reference clock amplitude to 2.05 v */ + rc = mdiodev_write(mdiodev, PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V); + if (rc) + goto err; + + return 0; + +err: + dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc); + return rc; +} + +static const struct phy_ops ns2_pci_phy_ops = { + .init = ns2_pci_phy_init, + .owner = THIS_MODULE, +}; + +static int ns2_pci_phy_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + struct phy_provider *provider; + struct phy *phy; + + phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Phy\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, mdiodev); + + provider = devm_of_phy_provider_register(&phy->dev, + of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register Phy provider\n"); + return PTR_ERR(provider); + } + + dev_info(dev, "%s PHY registered\n", dev_name(dev)); + + return 0; +} + +static const struct of_device_id ns2_pci_phy_of_match[] = { + { .compatible = "brcm,ns2-pcie-phy", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ns2_pci_phy_of_match); + +static struct mdio_driver ns2_pci_phy_driver = { + .mdiodrv = { + .driver = { + .name = "phy-bcm-ns2-pci", + .of_match_table = ns2_pci_phy_of_match, + }, + }, + .probe = ns2_pci_phy_probe, +}; +mdio_module_driver(ns2_pci_phy_driver); + +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom Northstar2 PCI Phy driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:phy-bcm-ns2-pci"); diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c new file mode 100644 index 000000000..36ad02c33 --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2017 Broadcom + +#include <linux/delay.h> +#include <linux/extcon-provider.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/irq.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define ICFG_DRD_AFE 0x0 +#define ICFG_MISC_STAT 0x18 +#define ICFG_DRD_P0CTL 0x1C +#define ICFG_STRAP_CTRL 0x20 +#define ICFG_FSM_CTRL 0x24 + +#define ICFG_DEV_BIT BIT(2) +#define IDM_RST_BIT BIT(0) +#define AFE_CORERDY_VDDC BIT(18) +#define PHY_PLL_RESETB BIT(15) +#define PHY_RESETB BIT(14) +#define PHY_PLL_LOCK BIT(0) + +#define DRD_DEV_MODE BIT(20) +#define OHCI_OVRCUR_POL BIT(11) +#define ICFG_OFF_MODE BIT(6) +#define PLL_LOCK_RETRY 1000 + +#define EVT_DEVICE 0 +#define EVT_HOST 1 + +#define DRD_HOST_MODE (BIT(2) | BIT(3)) +#define DRD_DEVICE_MODE (BIT(4) | BIT(5)) +#define DRD_HOST_VAL 0x803 +#define DRD_DEV_VAL 0x807 +#define GPIO_DELAY 20 + +struct ns2_phy_data; +struct ns2_phy_driver { + void __iomem *icfgdrd_regs; + void __iomem *idmdrd_rst_ctrl; + void __iomem *crmu_usb2_ctrl; + void __iomem *usb2h_strap_reg; + struct ns2_phy_data *data; + struct extcon_dev *edev; + struct gpio_desc *vbus_gpiod; + struct gpio_desc *id_gpiod; + int id_irq; + int vbus_irq; + unsigned long debounce_jiffies; + struct delayed_work wq_extcon; +}; + +struct ns2_phy_data { + struct ns2_phy_driver *driver; + struct phy *phy; + int new_state; +}; + +static const unsigned int usb_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static inline int pll_lock_stat(u32 usb_reg, int reg_mask, + struct ns2_phy_driver *driver) +{ + u32 val; + + return readl_poll_timeout_atomic(driver->icfgdrd_regs + usb_reg, + val, (val & reg_mask), 1, + PLL_LOCK_RETRY); +} + +static int ns2_drd_phy_init(struct phy *phy) +{ + struct ns2_phy_data *data = phy_get_drvdata(phy); + struct ns2_phy_driver *driver = data->driver; + u32 val; + + val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); + + if (data->new_state == EVT_HOST) { + val &= ~DRD_DEVICE_MODE; + val |= DRD_HOST_MODE; + } else { + val &= ~DRD_HOST_MODE; + val |= DRD_DEVICE_MODE; + } + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + return 0; +} + +static int ns2_drd_phy_poweroff(struct phy *phy) +{ + struct ns2_phy_data *data = phy_get_drvdata(phy); + struct ns2_phy_driver *driver = data->driver; + u32 val; + + val = readl(driver->crmu_usb2_ctrl); + val &= ~AFE_CORERDY_VDDC; + writel(val, driver->crmu_usb2_ctrl); + + val = readl(driver->crmu_usb2_ctrl); + val &= ~DRD_DEV_MODE; + writel(val, driver->crmu_usb2_ctrl); + + /* Disable Host and Device Mode */ + val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); + val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE | ICFG_OFF_MODE); + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + return 0; +} + +static int ns2_drd_phy_poweron(struct phy *phy) +{ + struct ns2_phy_data *data = phy_get_drvdata(phy); + struct ns2_phy_driver *driver = data->driver; + u32 extcon_event = data->new_state; + int ret; + u32 val; + + if (extcon_event == EVT_DEVICE) { + writel(DRD_DEV_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + + val = readl(driver->idmdrd_rst_ctrl); + val &= ~IDM_RST_BIT; + writel(val, driver->idmdrd_rst_ctrl); + + val = readl(driver->crmu_usb2_ctrl); + val |= (AFE_CORERDY_VDDC | DRD_DEV_MODE); + writel(val, driver->crmu_usb2_ctrl); + + /* Bring PHY and PHY_PLL out of Reset */ + val = readl(driver->crmu_usb2_ctrl); + val |= (PHY_PLL_RESETB | PHY_RESETB); + writel(val, driver->crmu_usb2_ctrl); + + ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver); + if (ret < 0) { + dev_err(&phy->dev, "Phy PLL lock failed\n"); + return ret; + } + } else { + writel(DRD_HOST_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + + val = readl(driver->crmu_usb2_ctrl); + val |= AFE_CORERDY_VDDC; + writel(val, driver->crmu_usb2_ctrl); + + ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver); + if (ret < 0) { + dev_err(&phy->dev, "Phy PLL lock failed\n"); + return ret; + } + + val = readl(driver->idmdrd_rst_ctrl); + val &= ~IDM_RST_BIT; + writel(val, driver->idmdrd_rst_ctrl); + + /* port over current Polarity */ + val = readl(driver->usb2h_strap_reg); + val |= OHCI_OVRCUR_POL; + writel(val, driver->usb2h_strap_reg); + } + + return 0; +} + +static void connect_change(struct ns2_phy_driver *driver) +{ + u32 extcon_event; + u32 val; + + extcon_event = driver->data->new_state; + val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); + + switch (extcon_event) { + case EVT_DEVICE: + val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE); + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = (val & ~DRD_HOST_MODE) | DRD_DEVICE_MODE; + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL); + val |= ICFG_DEV_BIT; + writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + break; + + case EVT_HOST: + val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE); + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = (val & ~DRD_DEVICE_MODE) | DRD_HOST_MODE; + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = readl(driver->usb2h_strap_reg); + val |= OHCI_OVRCUR_POL; + writel(val, driver->usb2h_strap_reg); + + val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL); + val &= ~ICFG_DEV_BIT; + writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + break; + + default: + pr_err("Invalid extcon event\n"); + break; + } +} + +static void extcon_work(struct work_struct *work) +{ + struct ns2_phy_driver *driver; + int vbus; + int id; + + driver = container_of(to_delayed_work(work), + struct ns2_phy_driver, wq_extcon); + + id = gpiod_get_value_cansleep(driver->id_gpiod); + vbus = gpiod_get_value_cansleep(driver->vbus_gpiod); + + if (!id && vbus) { /* Host connected */ + extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, true); + pr_debug("Host cable connected\n"); + driver->data->new_state = EVT_HOST; + connect_change(driver); + } else if (id && !vbus) { /* Disconnected */ + extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(driver->edev, EXTCON_USB, false); + pr_debug("Cable disconnected\n"); + } else if (id && vbus) { /* Device connected */ + extcon_set_state_sync(driver->edev, EXTCON_USB, true); + pr_debug("Device cable connected\n"); + driver->data->new_state = EVT_DEVICE; + connect_change(driver); + } +} + +static irqreturn_t gpio_irq_handler(int irq, void *dev_id) +{ + struct ns2_phy_driver *driver = dev_id; + + queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, + driver->debounce_jiffies); + + return IRQ_HANDLED; +} + +static const struct phy_ops ops = { + .init = ns2_drd_phy_init, + .power_on = ns2_drd_phy_poweron, + .power_off = ns2_drd_phy_poweroff, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ns2_drd_phy_dt_ids[] = { + { .compatible = "brcm,ns2-drd-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, ns2_drd_phy_dt_ids); + +static int ns2_drd_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct ns2_phy_driver *driver; + struct ns2_phy_data *data; + int ret; + u32 val; + + driver = devm_kzalloc(dev, sizeof(struct ns2_phy_driver), + GFP_KERNEL); + if (!driver) + return -ENOMEM; + + driver->data = devm_kzalloc(dev, sizeof(struct ns2_phy_data), + GFP_KERNEL); + if (!driver->data) + return -ENOMEM; + + driver->icfgdrd_regs = devm_platform_ioremap_resource_byname(pdev, "icfg"); + if (IS_ERR(driver->icfgdrd_regs)) + return PTR_ERR(driver->icfgdrd_regs); + + driver->idmdrd_rst_ctrl = devm_platform_ioremap_resource_byname(pdev, "rst-ctrl"); + if (IS_ERR(driver->idmdrd_rst_ctrl)) + return PTR_ERR(driver->idmdrd_rst_ctrl); + + driver->crmu_usb2_ctrl = devm_platform_ioremap_resource_byname(pdev, "crmu-ctrl"); + if (IS_ERR(driver->crmu_usb2_ctrl)) + return PTR_ERR(driver->crmu_usb2_ctrl); + + driver->usb2h_strap_reg = devm_platform_ioremap_resource_byname(pdev, "usb2-strap"); + if (IS_ERR(driver->usb2h_strap_reg)) + return PTR_ERR(driver->usb2h_strap_reg); + + /* create extcon */ + driver->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN); + if (IS_ERR(driver->id_gpiod)) { + dev_err(dev, "failed to get ID GPIO\n"); + return PTR_ERR(driver->id_gpiod); + } + driver->vbus_gpiod = devm_gpiod_get(&pdev->dev, "vbus", GPIOD_IN); + if (IS_ERR(driver->vbus_gpiod)) { + dev_err(dev, "failed to get VBUS GPIO\n"); + return PTR_ERR(driver->vbus_gpiod); + } + + driver->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); + if (IS_ERR(driver->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, driver->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + ret = gpiod_set_debounce(driver->id_gpiod, GPIO_DELAY * 1000); + if (ret < 0) + driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY); + + INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work); + + driver->id_irq = gpiod_to_irq(driver->id_gpiod); + if (driver->id_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + return driver->id_irq; + } + + driver->vbus_irq = gpiod_to_irq(driver->vbus_gpiod); + if (driver->vbus_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + return driver->vbus_irq; + } + + ret = devm_request_irq(dev, driver->id_irq, gpio_irq_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "usb_id", driver); + if (ret < 0) { + dev_err(dev, "failed to request handler for ID IRQ\n"); + return ret; + } + + ret = devm_request_irq(dev, driver->vbus_irq, gpio_irq_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "usb_vbus", driver); + if (ret < 0) { + dev_err(dev, "failed to request handler for VBUS IRQ\n"); + return ret; + } + + dev_set_drvdata(dev, driver); + + /* Shutdown all ports. They can be powered up as required */ + val = readl(driver->crmu_usb2_ctrl); + val &= ~(AFE_CORERDY_VDDC | PHY_RESETB); + writel(val, driver->crmu_usb2_ctrl); + + data = driver->data; + data->phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(data->phy)) { + dev_err(dev, "Failed to create usb drd phy\n"); + return PTR_ERR(data->phy); + } + + data->driver = driver; + phy_set_drvdata(data->phy, data); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "Failed to register as phy provider\n"); + return PTR_ERR(phy_provider); + } + + platform_set_drvdata(pdev, driver); + + dev_info(dev, "Registered NS2 DRD Phy device\n"); + queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, + driver->debounce_jiffies); + + return 0; +} + +static struct platform_driver ns2_drd_phy_driver = { + .probe = ns2_drd_phy_probe, + .driver = { + .name = "bcm-ns2-usbphy", + .of_match_table = of_match_ptr(ns2_drd_phy_dt_ids), + }, +}; +module_platform_driver(ns2_drd_phy_driver); + +MODULE_ALIAS("platform:bcm-ns2-drd-phy"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom NS2 USB2 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c new file mode 100644 index 000000000..8a4aadf16 --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Broadcom + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* we have up to 8 PAXB based RC. The 9th one is always PAXC */ +#define SR_NR_PCIE_PHYS 9 +#define SR_PAXC_PHY_IDX (SR_NR_PCIE_PHYS - 1) + +#define PCIE_PIPEMUX_CFG_OFFSET 0x10c +#define PCIE_PIPEMUX_SELECT_STRAP 0xf + +#define CDRU_STRAP_DATA_LSW_OFFSET 0x5c +#define PCIE_PIPEMUX_SHIFT 19 +#define PCIE_PIPEMUX_MASK 0xf + +#define MHB_MEM_PW_PAXC_OFFSET 0x1c0 +#define MHB_PWR_ARR_POWERON 0x8 +#define MHB_PWR_ARR_POWEROK 0x4 +#define MHB_PWR_POWERON 0x2 +#define MHB_PWR_POWEROK 0x1 +#define MHB_PWR_STATUS_MASK (MHB_PWR_ARR_POWERON | \ + MHB_PWR_ARR_POWEROK | \ + MHB_PWR_POWERON | \ + MHB_PWR_POWEROK) + +struct sr_pcie_phy_core; + +/** + * struct sr_pcie_phy - Stingray PCIe PHY + * + * @core: pointer to the Stingray PCIe PHY core control + * @index: PHY index + * @phy: pointer to the kernel PHY device + */ +struct sr_pcie_phy { + struct sr_pcie_phy_core *core; + unsigned int index; + struct phy *phy; +}; + +/** + * struct sr_pcie_phy_core - Stingray PCIe PHY core control + * + * @dev: pointer to device + * @base: base register of PCIe SS + * @cdru: regmap to the CDRU device + * @mhb: regmap to the MHB device + * @pipemux: pipemuex strap + * @phys: array of PCIe PHYs + */ +struct sr_pcie_phy_core { + struct device *dev; + void __iomem *base; + struct regmap *cdru; + struct regmap *mhb; + u32 pipemux; + struct sr_pcie_phy phys[SR_NR_PCIE_PHYS]; +}; + +/* + * PCIe PIPEMUX lookup table + * + * Each array index represents a PIPEMUX strap setting + * The array element represents a bitmap where a set bit means the PCIe + * core and associated serdes has been enabled as RC and is available for use + */ +static const u8 pipemux_table[] = { + /* PIPEMUX = 0, EP 1x16 */ + 0x00, + /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */ + 0x80, + /* PIPEMUX = 2, EP 4x4 */ + 0x00, + /* PIPEMUX = 3, RC 2x8, cores 0, 7 */ + 0x81, + /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */ + 0xc3, + /* PIPEMUX = 5, RC 8x2, all 8 cores */ + 0xff, + /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */ + 0xcd, + /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */ + 0xfd, + /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */ + 0xf0, + /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */ + 0xc0, + /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */ + 0x42, + /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */ + 0x3c, + /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */ + 0xfc, + /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */ + 0x4c, +}; + +/* + * Return true if the strap setting is valid + */ +static bool pipemux_strap_is_valid(u32 pipemux) +{ + return !!(pipemux < ARRAY_SIZE(pipemux_table)); +} + +/* + * Read the PCIe PIPEMUX from strap + */ +static u32 pipemux_strap_read(struct sr_pcie_phy_core *core) +{ + u32 pipemux; + + /* + * Read PIPEMUX configuration register to determine the pipemux setting + * + * In the case when the value indicates using HW strap, fall back to + * use HW strap + */ + pipemux = readl(core->base + PCIE_PIPEMUX_CFG_OFFSET); + pipemux &= PCIE_PIPEMUX_MASK; + if (pipemux == PCIE_PIPEMUX_SELECT_STRAP) { + regmap_read(core->cdru, CDRU_STRAP_DATA_LSW_OFFSET, &pipemux); + pipemux >>= PCIE_PIPEMUX_SHIFT; + pipemux &= PCIE_PIPEMUX_MASK; + } + + return pipemux; +} + +/* + * Given a PIPEMUX strap and PCIe core index, this function returns true if the + * PCIe core needs to be enabled + */ +static bool pcie_core_is_for_rc(struct sr_pcie_phy *phy) +{ + struct sr_pcie_phy_core *core = phy->core; + unsigned int core_idx = phy->index; + + return !!((pipemux_table[core->pipemux] >> core_idx) & 0x1); +} + +static int sr_pcie_phy_init(struct phy *p) +{ + struct sr_pcie_phy *phy = phy_get_drvdata(p); + + /* + * Check whether this PHY is for root complex or not. If yes, return + * zero so the host driver can proceed to enumeration. If not, return + * an error and that will force the host driver to bail out + */ + if (pcie_core_is_for_rc(phy)) + return 0; + + return -ENODEV; +} + +static int sr_paxc_phy_init(struct phy *p) +{ + struct sr_pcie_phy *phy = phy_get_drvdata(p); + struct sr_pcie_phy_core *core = phy->core; + unsigned int core_idx = phy->index; + u32 val; + + if (core_idx != SR_PAXC_PHY_IDX) + return -EINVAL; + + regmap_read(core->mhb, MHB_MEM_PW_PAXC_OFFSET, &val); + if ((val & MHB_PWR_STATUS_MASK) != MHB_PWR_STATUS_MASK) { + dev_err(core->dev, "PAXC is not powered up\n"); + return -ENODEV; + } + + return 0; +} + +static const struct phy_ops sr_pcie_phy_ops = { + .init = sr_pcie_phy_init, + .owner = THIS_MODULE, +}; + +static const struct phy_ops sr_paxc_phy_ops = { + .init = sr_paxc_phy_init, + .owner = THIS_MODULE, +}; + +static struct phy *sr_pcie_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct sr_pcie_phy_core *core; + int phy_idx; + + core = dev_get_drvdata(dev); + if (!core) + return ERR_PTR(-EINVAL); + + phy_idx = args->args[0]; + + if (WARN_ON(phy_idx >= SR_NR_PCIE_PHYS)) + return ERR_PTR(-ENODEV); + + return core->phys[phy_idx].phy; +} + +static int sr_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct sr_pcie_phy_core *core; + struct phy_provider *provider; + unsigned int phy_idx = 0; + + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; + + core->dev = dev; + core->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(core->base)) + return PTR_ERR(core->base); + + core->cdru = syscon_regmap_lookup_by_phandle(node, "brcm,sr-cdru"); + if (IS_ERR(core->cdru)) { + dev_err(core->dev, "unable to find CDRU device\n"); + return PTR_ERR(core->cdru); + } + + core->mhb = syscon_regmap_lookup_by_phandle(node, "brcm,sr-mhb"); + if (IS_ERR(core->mhb)) { + dev_err(core->dev, "unable to find MHB device\n"); + return PTR_ERR(core->mhb); + } + + /* read the PCIe PIPEMUX strap setting */ + core->pipemux = pipemux_strap_read(core); + if (!pipemux_strap_is_valid(core->pipemux)) { + dev_err(core->dev, "invalid PCIe PIPEMUX strap %u\n", + core->pipemux); + return -EIO; + } + + for (phy_idx = 0; phy_idx < SR_NR_PCIE_PHYS; phy_idx++) { + struct sr_pcie_phy *p = &core->phys[phy_idx]; + const struct phy_ops *ops; + + if (phy_idx == SR_PAXC_PHY_IDX) + ops = &sr_paxc_phy_ops; + else + ops = &sr_pcie_phy_ops; + + p->phy = devm_phy_create(dev, NULL, ops); + if (IS_ERR(p->phy)) { + dev_err(dev, "failed to create PCIe PHY\n"); + return PTR_ERR(p->phy); + } + + p->core = core; + p->index = phy_idx; + phy_set_drvdata(p->phy, p); + } + + dev_set_drvdata(dev, core); + + provider = devm_of_phy_provider_register(dev, sr_pcie_phy_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_info(dev, "Stingray PCIe PHY driver initialized\n"); + + return 0; +} + +static const struct of_device_id sr_pcie_phy_match_table[] = { + { .compatible = "brcm,sr-pcie-phy" }, + { } +}; +MODULE_DEVICE_TABLE(of, sr_pcie_phy_match_table); + +static struct platform_driver sr_pcie_phy_driver = { + .driver = { + .name = "sr-pcie-phy", + .of_match_table = sr_pcie_phy_match_table, + }, + .probe = sr_pcie_phy_probe, +}; +module_platform_driver(sr_pcie_phy_driver); + +MODULE_AUTHOR("Ray Jui <ray.jui@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Stingray PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c new file mode 100644 index 000000000..0002da3b5 --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Broadcom + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +enum bcm_usb_phy_version { + BCM_SR_USB_COMBO_PHY, + BCM_SR_USB_HS_PHY, +}; + +enum bcm_usb_phy_reg { + PLL_CTRL, + PHY_CTRL, + PHY_PLL_CTRL, +}; + +/* USB PHY registers */ + +static const u8 bcm_usb_combo_phy_ss[] = { + [PLL_CTRL] = 0x18, + [PHY_CTRL] = 0x14, +}; + +static const u8 bcm_usb_combo_phy_hs[] = { + [PLL_CTRL] = 0x0c, + [PHY_CTRL] = 0x10, +}; + +static const u8 bcm_usb_hs_phy[] = { + [PLL_CTRL] = 0x8, + [PHY_CTRL] = 0xc, +}; + +enum pll_ctrl_bits { + PLL_RESETB, + SSPLL_SUSPEND_EN, + PLL_SEQ_START, + PLL_LOCK, +}; + +static const u8 u3pll_ctrl[] = { + [PLL_RESETB] = 0, + [SSPLL_SUSPEND_EN] = 1, + [PLL_SEQ_START] = 2, + [PLL_LOCK] = 3, +}; + +#define HSPLL_PDIV_MASK 0xF +#define HSPLL_PDIV_VAL 0x1 + +static const u8 u2pll_ctrl[] = { + [PLL_RESETB] = 5, + [PLL_LOCK] = 6, +}; + +enum bcm_usb_phy_ctrl_bits { + CORERDY, + PHY_RESETB, + PHY_PCTL, +}; + +#define PHY_PCTL_MASK 0xffff +#define SSPHY_PCTL_VAL 0x0006 + +static const u8 u3phy_ctrl[] = { + [PHY_RESETB] = 1, + [PHY_PCTL] = 2, +}; + +static const u8 u2phy_ctrl[] = { + [CORERDY] = 0, + [PHY_RESETB] = 5, + [PHY_PCTL] = 6, +}; + +struct bcm_usb_phy_cfg { + uint32_t type; + uint32_t version; + void __iomem *regs; + struct phy *phy; + const u8 *offset; +}; + +#define PLL_LOCK_RETRY_COUNT 1000 + +enum bcm_usb_phy_type { + USB_HS_PHY, + USB_SS_PHY, +}; + +#define NUM_BCM_SR_USB_COMBO_PHYS 2 + +static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear) +{ + writel(readl(addr) & ~clear, addr); +} + +static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set) +{ + writel(readl(addr) | set, addr); +} + +static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit) +{ + u32 data; + int ret; + + ret = readl_poll_timeout_atomic(addr, data, (data & bit), 1, + PLL_LOCK_RETRY_COUNT); + if (ret) + pr_err("%s: FAIL\n", __func__); + + return ret; +} + +static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg) +{ + int ret = 0; + void __iomem *regs = phy_cfg->regs; + const u8 *offset; + u32 rd_data; + + offset = phy_cfg->offset; + + /* Set pctl with mode and soft reset */ + rd_data = readl(regs + offset[PHY_CTRL]); + rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]); + rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]); + writel(rd_data, regs + offset[PHY_CTRL]); + + bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[SSPLL_SUSPEND_EN])); + bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[PLL_SEQ_START])); + bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[PLL_RESETB])); + + /* Maximum timeout for PLL reset done */ + msleep(30); + + ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[PLL_LOCK])); + + return ret; +} + +static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg) +{ + int ret = 0; + void __iomem *regs = phy_cfg->regs; + const u8 *offset; + + offset = phy_cfg->offset; + + bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_RESETB])); + bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_RESETB])); + + ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_LOCK])); + + return ret; +} + +static int bcm_usb_phy_reset(struct phy *phy) +{ + struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy); + void __iomem *regs = phy_cfg->regs; + const u8 *offset; + + offset = phy_cfg->offset; + + if (phy_cfg->type == USB_HS_PHY) { + bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL], + BIT(u2phy_ctrl[CORERDY])); + bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], + BIT(u2phy_ctrl[CORERDY])); + } + + return 0; +} + +static int bcm_usb_phy_init(struct phy *phy) +{ + struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy); + int ret = -EINVAL; + + if (phy_cfg->type == USB_SS_PHY) + ret = bcm_usb_ss_phy_init(phy_cfg); + else if (phy_cfg->type == USB_HS_PHY) + ret = bcm_usb_hs_phy_init(phy_cfg); + + return ret; +} + +static const struct phy_ops sr_phy_ops = { + .init = bcm_usb_phy_init, + .reset = bcm_usb_phy_reset, + .owner = THIS_MODULE, +}; + +static struct phy *bcm_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct bcm_usb_phy_cfg *phy_cfg; + int phy_idx; + + phy_cfg = dev_get_drvdata(dev); + if (!phy_cfg) + return ERR_PTR(-EINVAL); + + if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) { + phy_idx = args->args[0]; + + if (WARN_ON(phy_idx > 1)) + return ERR_PTR(-ENODEV); + + return phy_cfg[phy_idx].phy; + } else + return phy_cfg->phy; +} + +static int bcm_usb_phy_create(struct device *dev, struct device_node *node, + void __iomem *regs, uint32_t version) +{ + struct bcm_usb_phy_cfg *phy_cfg; + int idx; + + if (version == BCM_SR_USB_COMBO_PHY) { + phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS * + sizeof(struct bcm_usb_phy_cfg), + GFP_KERNEL); + if (!phy_cfg) + return -ENOMEM; + + for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) { + phy_cfg[idx].regs = regs; + phy_cfg[idx].version = version; + if (idx == 0) { + phy_cfg[idx].offset = bcm_usb_combo_phy_hs; + phy_cfg[idx].type = USB_HS_PHY; + } else { + phy_cfg[idx].offset = bcm_usb_combo_phy_ss; + phy_cfg[idx].type = USB_SS_PHY; + } + phy_cfg[idx].phy = devm_phy_create(dev, node, + &sr_phy_ops); + if (IS_ERR(phy_cfg[idx].phy)) + return PTR_ERR(phy_cfg[idx].phy); + + phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]); + } + } else if (version == BCM_SR_USB_HS_PHY) { + phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg), + GFP_KERNEL); + if (!phy_cfg) + return -ENOMEM; + + phy_cfg->regs = regs; + phy_cfg->version = version; + phy_cfg->offset = bcm_usb_hs_phy; + phy_cfg->type = USB_HS_PHY; + phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops); + if (IS_ERR(phy_cfg->phy)) + return PTR_ERR(phy_cfg->phy); + + phy_set_drvdata(phy_cfg->phy, phy_cfg); + } else + return -ENODEV; + + dev_set_drvdata(dev, phy_cfg); + + return 0; +} + +static const struct of_device_id bcm_usb_phy_of_match[] = { + { + .compatible = "brcm,sr-usb-combo-phy", + .data = (void *)BCM_SR_USB_COMBO_PHY, + }, + { + .compatible = "brcm,sr-usb-hs-phy", + .data = (void *)BCM_SR_USB_HS_PHY, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match); + +static int bcm_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node; + const struct of_device_id *of_id; + void __iomem *regs; + int ret; + enum bcm_usb_phy_version version; + struct phy_provider *phy_provider; + + regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + of_id = of_match_node(bcm_usb_phy_of_match, dn); + if (of_id) + version = (enum bcm_usb_phy_version)of_id->data; + else + return -ENODEV; + + ret = bcm_usb_phy_create(dev, dn, regs, version); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver bcm_usb_phy_driver = { + .driver = { + .name = "phy-bcm-sr-usb", + .of_match_table = bcm_usb_phy_of_match, + }, + .probe = bcm_usb_phy_probe, +}; +module_platform_driver(bcm_usb_phy_driver); + +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom stingray USB Phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c new file mode 100644 index 000000000..6c05ba8b0 --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BCM6328 USBH PHY Controller Driver + * + * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2015 Simon Arlott + * + * Derived from bcm963xx_4.12L.06B_consumer/kernel/linux/arch/mips/bcm963xx/setup.c: + * Copyright (C) 2002 Broadcom Corporation + * + * Derived from OpenWrt patches: + * Copyright (C) 2013 Jonas Gorski <jonas.gorski@gmail.com> + * Copyright (C) 2013 Florian Fainelli <f.fainelli@gmail.com> + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/reset.h> + +/* USBH control register offsets */ +enum usbh_regs { + USBH_BRT_CONTROL1 = 0, + USBH_BRT_CONTROL2, + USBH_BRT_STATUS1, + USBH_BRT_STATUS2, + USBH_UTMI_CONTROL1, +#define USBH_UC1_DEV_MODE_SEL BIT(0) + USBH_TEST_PORT_CONTROL, + USBH_PLL_CONTROL1, +#define USBH_PLLC_REFCLKSEL_SHIFT 0 +#define USBH_PLLC_REFCLKSEL_MASK (0x3 << USBH_PLLC_REFCLKSEL_SHIFT) +#define USBH_PLLC_CLKSEL_SHIFT 2 +#define USBH_PLLC_CLKSEL_MASK (0x3 << USBH_PLLC_CLKSEL_MASK) +#define USBH_PLLC_XTAL_PWRDWNB BIT(4) +#define USBH_PLLC_PLL_PWRDWNB BIT(5) +#define USBH_PLLC_PLL_CALEN BIT(6) +#define USBH_PLLC_PHYPLL_BYP BIT(7) +#define USBH_PLLC_PLL_RESET BIT(8) +#define USBH_PLLC_PLL_IDDQ_PWRDN BIT(9) +#define USBH_PLLC_PLL_PWRDN_DELAY BIT(10) +#define USBH_6318_PLLC_PLL_SUSPEND_EN BIT(27) +#define USBH_6318_PLLC_PHYPLL_BYP BIT(29) +#define USBH_6318_PLLC_PLL_RESET BIT(30) +#define USBH_6318_PLLC_PLL_IDDQ_PWRDN BIT(31) + USBH_SWAP_CONTROL, +#define USBH_SC_OHCI_DATA_SWAP BIT(0) +#define USBH_SC_OHCI_ENDIAN_SWAP BIT(1) +#define USBH_SC_OHCI_LOGICAL_ADDR_EN BIT(2) +#define USBH_SC_EHCI_DATA_SWAP BIT(3) +#define USBH_SC_EHCI_ENDIAN_SWAP BIT(4) +#define USBH_SC_EHCI_LOGICAL_ADDR_EN BIT(5) +#define USBH_SC_USB_DEVICE_SEL BIT(6) + USBH_GENERIC_CONTROL, +#define USBH_GC_PLL_SUSPEND_EN BIT(1) + USBH_FRAME_ADJUST_VALUE, + USBH_SETUP, +#define USBH_S_IOC BIT(4) +#define USBH_S_IPP BIT(5) + USBH_MDIO, + USBH_MDIO32, + USBH_USB_SIM_CONTROL, +#define USBH_USC_LADDR_SEL BIT(5) + + __USBH_ENUM_SIZE +}; + +struct bcm63xx_usbh_phy_variant { + /* Registers */ + long regs[__USBH_ENUM_SIZE]; + + /* PLLC bits to set/clear for power on */ + u32 power_pllc_clr; + u32 power_pllc_set; + + /* Setup bits to set/clear for power on */ + u32 setup_clr; + u32 setup_set; + + /* Swap Control bits to set */ + u32 swapctl_dev_set; + + /* Test Port Control value to set if non-zero */ + u32 tpc_val; + + /* USB Sim Control bits to set */ + u32 usc_set; + + /* UTMI Control 1 bits to set */ + u32 utmictl1_dev_set; +}; + +struct bcm63xx_usbh_phy { + void __iomem *base; + struct clk *usbh_clk; + struct clk *usb_ref_clk; + struct reset_control *reset; + const struct bcm63xx_usbh_phy_variant *variant; + bool device_mode; +}; + +static const struct bcm63xx_usbh_phy_variant usbh_bcm6318 = { + .regs = { + [USBH_BRT_CONTROL1] = -1, + [USBH_BRT_CONTROL2] = -1, + [USBH_BRT_STATUS1] = -1, + [USBH_BRT_STATUS2] = -1, + [USBH_UTMI_CONTROL1] = 0x2c, + [USBH_TEST_PORT_CONTROL] = 0x1c, + [USBH_PLL_CONTROL1] = 0x04, + [USBH_SWAP_CONTROL] = 0x0c, + [USBH_GENERIC_CONTROL] = -1, + [USBH_FRAME_ADJUST_VALUE] = 0x08, + [USBH_SETUP] = 0x00, + [USBH_MDIO] = 0x14, + [USBH_MDIO32] = 0x18, + [USBH_USB_SIM_CONTROL] = 0x20, + }, + .power_pllc_clr = USBH_6318_PLLC_PLL_IDDQ_PWRDN, + .power_pllc_set = USBH_6318_PLLC_PLL_SUSPEND_EN, + .setup_set = USBH_S_IOC, + .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL, + .usc_set = USBH_USC_LADDR_SEL, + .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL, +}; + +static const struct bcm63xx_usbh_phy_variant usbh_bcm6328 = { + .regs = { + [USBH_BRT_CONTROL1] = 0x00, + [USBH_BRT_CONTROL2] = 0x04, + [USBH_BRT_STATUS1] = 0x08, + [USBH_BRT_STATUS2] = 0x0c, + [USBH_UTMI_CONTROL1] = 0x10, + [USBH_TEST_PORT_CONTROL] = 0x14, + [USBH_PLL_CONTROL1] = 0x18, + [USBH_SWAP_CONTROL] = 0x1c, + [USBH_GENERIC_CONTROL] = 0x20, + [USBH_FRAME_ADJUST_VALUE] = 0x24, + [USBH_SETUP] = 0x28, + [USBH_MDIO] = 0x2c, + [USBH_MDIO32] = 0x30, + [USBH_USB_SIM_CONTROL] = 0x34, + }, + .setup_set = USBH_S_IOC, + .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL, + .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL, +}; + +static const struct bcm63xx_usbh_phy_variant usbh_bcm6358 = { + .regs = { + [USBH_BRT_CONTROL1] = -1, + [USBH_BRT_CONTROL2] = -1, + [USBH_BRT_STATUS1] = -1, + [USBH_BRT_STATUS2] = -1, + [USBH_UTMI_CONTROL1] = -1, + [USBH_TEST_PORT_CONTROL] = 0x24, + [USBH_PLL_CONTROL1] = -1, + [USBH_SWAP_CONTROL] = 0x00, + [USBH_GENERIC_CONTROL] = -1, + [USBH_FRAME_ADJUST_VALUE] = -1, + [USBH_SETUP] = -1, + [USBH_MDIO] = -1, + [USBH_MDIO32] = -1, + [USBH_USB_SIM_CONTROL] = -1, + }, + /* + * The magic value comes for the original vendor BSP + * and is needed for USB to work. Datasheet does not + * help, so the magic value is used as-is. + */ + .tpc_val = 0x1c0020, +}; + +static const struct bcm63xx_usbh_phy_variant usbh_bcm6368 = { + .regs = { + [USBH_BRT_CONTROL1] = 0x00, + [USBH_BRT_CONTROL2] = 0x04, + [USBH_BRT_STATUS1] = 0x08, + [USBH_BRT_STATUS2] = 0x0c, + [USBH_UTMI_CONTROL1] = 0x10, + [USBH_TEST_PORT_CONTROL] = 0x14, + [USBH_PLL_CONTROL1] = 0x18, + [USBH_SWAP_CONTROL] = 0x1c, + [USBH_GENERIC_CONTROL] = -1, + [USBH_FRAME_ADJUST_VALUE] = 0x24, + [USBH_SETUP] = 0x28, + [USBH_MDIO] = 0x2c, + [USBH_MDIO32] = 0x30, + [USBH_USB_SIM_CONTROL] = 0x34, + }, + .power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY, + .setup_set = USBH_S_IOC, + .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL, + .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL, +}; + +static const struct bcm63xx_usbh_phy_variant usbh_bcm63268 = { + .regs = { + [USBH_BRT_CONTROL1] = 0x00, + [USBH_BRT_CONTROL2] = 0x04, + [USBH_BRT_STATUS1] = 0x08, + [USBH_BRT_STATUS2] = 0x0c, + [USBH_UTMI_CONTROL1] = 0x10, + [USBH_TEST_PORT_CONTROL] = 0x14, + [USBH_PLL_CONTROL1] = 0x18, + [USBH_SWAP_CONTROL] = 0x1c, + [USBH_GENERIC_CONTROL] = 0x20, + [USBH_FRAME_ADJUST_VALUE] = 0x24, + [USBH_SETUP] = 0x28, + [USBH_MDIO] = 0x2c, + [USBH_MDIO32] = 0x30, + [USBH_USB_SIM_CONTROL] = 0x34, + }, + .power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY, + .setup_clr = USBH_S_IPP, + .setup_set = USBH_S_IOC, + .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL, + .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL, +}; + +static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg) +{ + return (usbh->variant->regs[reg] >= 0); +} + +static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg) +{ + return __raw_readl(usbh->base + usbh->variant->regs[reg]); +} + +static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg, + u32 value) +{ + __raw_writel(value, usbh->base + usbh->variant->regs[reg]); +} + +static int bcm63xx_usbh_phy_init(struct phy *phy) +{ + struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy); + int ret; + + ret = clk_prepare_enable(usbh->usbh_clk); + if (ret) { + dev_err(&phy->dev, "unable to enable usbh clock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(usbh->usb_ref_clk); + if (ret) { + dev_err(&phy->dev, "unable to enable usb_ref clock: %d\n", ret); + clk_disable_unprepare(usbh->usbh_clk); + return ret; + } + + ret = reset_control_reset(usbh->reset); + if (ret) { + dev_err(&phy->dev, "unable to reset device: %d\n", ret); + clk_disable_unprepare(usbh->usb_ref_clk); + clk_disable_unprepare(usbh->usbh_clk); + return ret; + } + + /* Configure to work in native CPU endian */ + if (usbh_has_reg(usbh, USBH_SWAP_CONTROL)) { + u32 val = usbh_readl(usbh, USBH_SWAP_CONTROL); + + val |= USBH_SC_EHCI_DATA_SWAP; + val &= ~USBH_SC_EHCI_ENDIAN_SWAP; + + val |= USBH_SC_OHCI_DATA_SWAP; + val &= ~USBH_SC_OHCI_ENDIAN_SWAP; + + if (usbh->device_mode && usbh->variant->swapctl_dev_set) + val |= usbh->variant->swapctl_dev_set; + + usbh_writel(usbh, USBH_SWAP_CONTROL, val); + } + + if (usbh_has_reg(usbh, USBH_SETUP)) { + u32 val = usbh_readl(usbh, USBH_SETUP); + + val |= usbh->variant->setup_set; + val &= ~usbh->variant->setup_clr; + + usbh_writel(usbh, USBH_SETUP, val); + } + + if (usbh_has_reg(usbh, USBH_USB_SIM_CONTROL)) { + u32 val = usbh_readl(usbh, USBH_USB_SIM_CONTROL); + + val |= usbh->variant->usc_set; + + usbh_writel(usbh, USBH_USB_SIM_CONTROL, val); + } + + if (usbh->variant->tpc_val && + usbh_has_reg(usbh, USBH_TEST_PORT_CONTROL)) + usbh_writel(usbh, USBH_TEST_PORT_CONTROL, + usbh->variant->tpc_val); + + if (usbh->device_mode && + usbh_has_reg(usbh, USBH_UTMI_CONTROL1) && + usbh->variant->utmictl1_dev_set) { + u32 val = usbh_readl(usbh, USBH_UTMI_CONTROL1); + + val |= usbh->variant->utmictl1_dev_set; + + usbh_writel(usbh, USBH_UTMI_CONTROL1, val); + } + + return 0; +} + +static int bcm63xx_usbh_phy_power_on(struct phy *phy) +{ + struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy); + + if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) { + u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1); + + val |= usbh->variant->power_pllc_set; + val &= ~usbh->variant->power_pllc_clr; + + usbh_writel(usbh, USBH_PLL_CONTROL1, val); + } + + return 0; +} + +static int bcm63xx_usbh_phy_power_off(struct phy *phy) +{ + struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy); + + if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) { + u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1); + + val &= ~usbh->variant->power_pllc_set; + val |= usbh->variant->power_pllc_clr; + + usbh_writel(usbh, USBH_PLL_CONTROL1, val); + } + + return 0; +} + +static int bcm63xx_usbh_phy_exit(struct phy *phy) +{ + struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy); + + clk_disable_unprepare(usbh->usbh_clk); + clk_disable_unprepare(usbh->usb_ref_clk); + + return 0; +} + +static const struct phy_ops bcm63xx_usbh_phy_ops = { + .exit = bcm63xx_usbh_phy_exit, + .init = bcm63xx_usbh_phy_init, + .power_off = bcm63xx_usbh_phy_power_off, + .power_on = bcm63xx_usbh_phy_power_on, + .owner = THIS_MODULE, +}; + +static struct phy *bcm63xx_usbh_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct bcm63xx_usbh_phy *usbh = dev_get_drvdata(dev); + + usbh->device_mode = !!args->args[0]; + + return of_phy_simple_xlate(dev, args); +} + +static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm63xx_usbh_phy *usbh; + const struct bcm63xx_usbh_phy_variant *variant; + struct phy *phy; + struct phy_provider *phy_provider; + + usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL); + if (!usbh) + return -ENOMEM; + + variant = device_get_match_data(dev); + if (!variant) + return -EINVAL; + usbh->variant = variant; + + usbh->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(usbh->base)) + return PTR_ERR(usbh->base); + + usbh->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(usbh->reset)) { + if (PTR_ERR(usbh->reset) != -EPROBE_DEFER) + dev_err(dev, "failed to get reset\n"); + return PTR_ERR(usbh->reset); + } + + usbh->usbh_clk = devm_clk_get_optional(dev, "usbh"); + if (IS_ERR(usbh->usbh_clk)) + return PTR_ERR(usbh->usbh_clk); + + usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref"); + if (IS_ERR(usbh->usb_ref_clk)) + return PTR_ERR(usbh->usb_ref_clk); + + phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + platform_set_drvdata(pdev, usbh); + phy_set_drvdata(phy, usbh); + + phy_provider = devm_of_phy_provider_register(dev, + bcm63xx_usbh_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(phy_provider); + } + + dev_dbg(dev, "Registered BCM63xx USB PHY driver\n"); + + return 0; +} + +static const struct of_device_id bcm63xx_usbh_phy_ids[] __initconst = { + { .compatible = "brcm,bcm6318-usbh-phy", .data = &usbh_bcm6318 }, + { .compatible = "brcm,bcm6328-usbh-phy", .data = &usbh_bcm6328 }, + { .compatible = "brcm,bcm6358-usbh-phy", .data = &usbh_bcm6358 }, + { .compatible = "brcm,bcm6362-usbh-phy", .data = &usbh_bcm6368 }, + { .compatible = "brcm,bcm6368-usbh-phy", .data = &usbh_bcm6368 }, + { .compatible = "brcm,bcm63268-usbh-phy", .data = &usbh_bcm63268 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bcm63xx_usbh_phy_ids); + +static struct platform_driver bcm63xx_usbh_phy_driver __refdata = { + .driver = { + .name = "bcm63xx-usbh-phy", + .of_match_table = bcm63xx_usbh_phy_ids, + }, + .probe = bcm63xx_usbh_phy_probe, +}; +module_platform_driver(bcm63xx_usbh_phy_driver); + +MODULE_DESCRIPTION("BCM63xx USBH PHY driver"); +MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>"); +MODULE_AUTHOR("Simon Arlott"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c new file mode 100644 index 000000000..769c707d9 --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -0,0 +1,860 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Broadcom SATA3 AHCI Controller PHY Driver + * + * Copyright (C) 2016 Broadcom + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define SATA_PCB_BANK_OFFSET 0x23c +#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4) + +#define MAX_PORTS 2 + +/* Register offset between PHYs in PCB space */ +#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000 + +/* The older SATA PHY registers duplicated per port registers within the map, + * rather than having a separate map per port. + */ +#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10 + +/* Register offset between PHYs in PHY control space */ +#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 + +enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_16NM, + BRCM_SATA_PHY_STB_28NM, + BRCM_SATA_PHY_STB_40NM, + BRCM_SATA_PHY_IPROC_NS2, + BRCM_SATA_PHY_IPROC_NSP, + BRCM_SATA_PHY_IPROC_SR, + BRCM_SATA_PHY_DSL_28NM, +}; + +enum brcm_sata_phy_rxaeq_mode { + RXAEQ_MODE_OFF = 0, + RXAEQ_MODE_AUTO, + RXAEQ_MODE_MANUAL, +}; + +static enum brcm_sata_phy_rxaeq_mode rxaeq_to_val(const char *m) +{ + if (!strcmp(m, "auto")) + return RXAEQ_MODE_AUTO; + else if (!strcmp(m, "manual")) + return RXAEQ_MODE_MANUAL; + else + return RXAEQ_MODE_OFF; +} + +struct brcm_sata_port { + int portnum; + struct phy *phy; + struct brcm_sata_phy *phy_priv; + bool ssc_en; + enum brcm_sata_phy_rxaeq_mode rxaeq_mode; + u32 rxaeq_val; + u32 tx_amplitude_val; +}; + +struct brcm_sata_phy { + struct device *dev; + void __iomem *phy_base; + void __iomem *ctrl_base; + enum brcm_sata_phy_version version; + + struct brcm_sata_port phys[MAX_PORTS]; +}; + +enum sata_phy_regs { + BLOCK0_REG_BANK = 0x000, + BLOCK0_XGXSSTATUS = 0x81, + BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12), + BLOCK0_SPARE = 0x8d, + BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1, + + BLOCK1_REG_BANK = 0x10, + BLOCK1_TEST_TX = 0x83, + BLOCK1_TEST_TX_AMP_SHIFT = 12, + + PLL_REG_BANK_0 = 0x050, + PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, + PLLCONTROL_0_FREQ_DET_RESTART = BIT(13), + PLLCONTROL_0_FREQ_MONITOR = BIT(12), + PLLCONTROL_0_SEQ_START = BIT(15), + PLL_CAP_CHARGE_TIME = 0x83, + PLL_VCO_CAL_THRESH = 0x84, + PLL_CAP_CONTROL = 0x85, + PLL_FREQ_DET_TIME = 0x86, + PLL_ACTRL2 = 0x8b, + PLL_ACTRL2_SELDIV_MASK = 0x1f, + PLL_ACTRL2_SELDIV_SHIFT = 9, + PLL_ACTRL6 = 0x86, + + PLL1_REG_BANK = 0x060, + PLL1_ACTRL2 = 0x82, + PLL1_ACTRL3 = 0x83, + PLL1_ACTRL4 = 0x84, + PLL1_ACTRL5 = 0x85, + PLL1_ACTRL6 = 0x86, + PLL1_ACTRL7 = 0x87, + PLL1_ACTRL8 = 0x88, + + TX_REG_BANK = 0x070, + TX_ACTRL0 = 0x80, + TX_ACTRL0_TXPOL_FLIP = BIT(6), + TX_ACTRL5 = 0x85, + TX_ACTRL5_SSC_EN = BIT(11), + + AEQRX_REG_BANK_0 = 0xd0, + AEQ_CONTROL1 = 0x81, + AEQ_CONTROL1_ENABLE = BIT(2), + AEQ_CONTROL1_FREEZE = BIT(3), + AEQ_FRC_EQ = 0x83, + AEQ_FRC_EQ_FORCE = BIT(0), + AEQ_FRC_EQ_FORCE_VAL = BIT(1), + AEQ_RFZ_FRC_VAL = BIT(8), + AEQRX_REG_BANK_1 = 0xe0, + AEQRX_SLCAL0_CTRL0 = 0x82, + AEQRX_SLCAL1_CTRL0 = 0x86, + + OOB_REG_BANK = 0x150, + OOB1_REG_BANK = 0x160, + OOB_CTRL1 = 0x80, + OOB_CTRL1_BURST_MAX_MASK = 0xf, + OOB_CTRL1_BURST_MAX_SHIFT = 12, + OOB_CTRL1_BURST_MIN_MASK = 0xf, + OOB_CTRL1_BURST_MIN_SHIFT = 8, + OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4, + OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0, + OOB_CTRL2 = 0x81, + OOB_CTRL2_SEL_ENA_SHIFT = 15, + OOB_CTRL2_SEL_ENA_RC_SHIFT = 14, + OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8, + OOB_CTRL2_BURST_CNT_MASK = 0x3, + OOB_CTRL2_BURST_CNT_SHIFT = 6, + OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0, + + TXPMD_REG_BANK = 0x1a0, + TXPMD_CONTROL1 = 0x81, + TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), + TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1), + TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82, + TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83, + TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff, + TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84, + TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, + + RXPMD_REG_BANK = 0x1c0, + RXPMD_RX_CDR_CONTROL1 = 0x81, + RXPMD_RX_PPM_VAL_MASK = 0x1ff, + RXPMD_RXPMD_EN_FRC = BIT(12), + RXPMD_RXPMD_EN_FRC_VAL = BIT(13), + RXPMD_RX_CDR_CDR_PROP_BW = 0x82, + RXPMD_G_CDR_PROP_BW_MASK = 0x7, + RXPMD_G1_CDR_PROP_BW_SHIFT = 0, + RXPMD_G2_CDR_PROP_BW_SHIFT = 3, + RXPMD_G3_CDR_PROB_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, + RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, + RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, + RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, + RXPMD_MON_CORRECT_EN = BIT(8), + RXPMD_MON_MARGIN_VAL_MASK = 0xff, +}; + +enum sata_phy_ctrl_regs { + PHY_CTRL_1 = 0x0, + PHY_CTRL_1_RESET = BIT(0), +}; + +static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 size = 0; + + switch (priv->version) { + case BRCM_SATA_PHY_IPROC_NS2: + size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE; + break; + default: + dev_err(priv->dev, "invalid phy version\n"); + break; + } + + return priv->ctrl_base + (port->portnum * size); +} + +static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank, + u32 ofs, u32 msk, u32 value) +{ + struct brcm_sata_phy *priv = port->phy_priv; + void __iomem *pcb_base = priv->phy_base; + u32 tmp; + + if (priv->version == BRCM_SATA_PHY_STB_40NM) + bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); + else + pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); + + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); + tmp = (tmp & msk) | value; + writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs) +{ + struct brcm_sata_phy *priv = port->phy_priv; + void __iomem *pcb_base = priv->phy_base; + + if (priv->version == BRCM_SATA_PHY_STB_40NM) + bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); + else + pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); + + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +/* These defaults were characterized by H/W group */ +#define STB_FMIN_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_SSC 0x83 + +static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 tmp; + + /* override the TX spread spectrum setting */ + tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); + + /* set fixed min freq */ + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, + ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, + STB_FMIN_VAL_DEFAULT); + + /* set fixed max freq depending on SSC config */ + if (port->ssc_en) { + dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum); + tmp = STB_FMAX_VAL_SSC; + } else { + tmp = STB_FMAX_VAL_DEFAULT; + } + + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, + ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); +} + +#define AEQ_FRC_EQ_VAL_SHIFT 2 +#define AEQ_FRC_EQ_VAL_MASK 0x3f + +static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port) +{ + u32 tmp = 0, reg = 0; + + switch (port->rxaeq_mode) { + case RXAEQ_MODE_OFF: + return 0; + + case RXAEQ_MODE_AUTO: + reg = AEQ_CONTROL1; + tmp = AEQ_CONTROL1_ENABLE | AEQ_CONTROL1_FREEZE; + break; + + case RXAEQ_MODE_MANUAL: + reg = AEQ_FRC_EQ; + tmp = AEQ_FRC_EQ_FORCE | AEQ_FRC_EQ_FORCE_VAL; + if (port->rxaeq_val > AEQ_FRC_EQ_VAL_MASK) + return -EINVAL; + tmp |= port->rxaeq_val << AEQ_FRC_EQ_VAL_SHIFT; + break; + } + + brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, reg, ~tmp, tmp); + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, reg, ~tmp, tmp); + + return 0; +} + +static int brcm_stb_sata_init(struct brcm_sata_port *port) +{ + brcm_stb_sata_ssc_init(port); + + return brcm_stb_sata_rxaeq_init(port); +} + +static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) +{ + u32 tmp, value; + + /* Reduce CP tail current to 1/16th of its default value */ + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + + /* Turn off CP tail current boost */ + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + + /* Set a specific AEQ equalizer value */ + tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; + brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + ~(tmp | AEQ_RFZ_FRC_VAL | + AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), + tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); + + /* Set RX PPM val center frequency */ + if (port->ssc_en) + value = 0x52; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + ~RXPMD_RX_PPM_VAL_MASK, value); + + /* Set proportional loop bandwith Gen1/2/3 */ + tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; + if (port->ssc_en) + value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; + else + value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + value); + + /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ + tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + ~tmp, value); + + /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ + tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + ~tmp, value); + + /* Set no guard band and clamp CDR */ + tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; + if (port->ssc_en) + value = 0x51; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, RXPMD_MON_CORRECT_EN | value); + + tmp = GENMASK(15, 12); + switch (port->tx_amplitude_val) { + case 400: + value = BIT(12) | BIT(13); + break; + case 500: + value = BIT(13); + break; + case 600: + value = BIT(12); + break; + case 800: + value = 0; + break; + default: + value = tmp; + break; + } + + if (value != tmp) + brcm_sata_phy_wr(port, BLOCK1_REG_BANK, BLOCK1_TEST_TX, ~tmp, + value); + + /* Turn on/off SSC */ + brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + port->ssc_en ? TX_ACTRL5_SSC_EN : 0); + + return 0; +} + +static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) +{ + return brcm_stb_sata_16nm_ssc_init(port); +} + +/* NS2 SATA PLL1 defaults were characterized by H/W group */ +#define NS2_PLL1_ACTRL2_MAGIC 0x1df8 +#define NS2_PLL1_ACTRL3_MAGIC 0x2b00 +#define NS2_PLL1_ACTRL4_MAGIC 0x8824 + +static int brcm_ns2_sata_init(struct brcm_sata_port *port) +{ + int try; + unsigned int val; + void __iomem *ctrl_base = brcm_sata_ctrl_base(port); + struct device *dev = port->phy_priv->dev; + + /* Configure OOB control */ + val = 0x0; + val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = 0x0; + val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + /* Configure PHY PLL register bank 1 */ + val = NS2_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = NS2_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = NS2_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY BLOCK0 register bank */ + /* Set oob_clk_sel to refclk/2 */ + brcm_sata_phy_wr(port, BLOCK0_REG_BANK, BLOCK0_SPARE, + ~BLOCK0_SPARE_OOB_CLK_SEL_MASK, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2); + + /* Strobe PHY reset using PHY control register */ + writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1); + mdelay(1); + writel(0x0, ctrl_base + PHY_CTRL_1); + mdelay(1); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + while (try) { + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +static int brcm_nsp_sata_init(struct brcm_sata_port *port) +{ + struct device *dev = port->phy_priv->dev; + unsigned int oob_bank; + unsigned int val, try; + + /* Configure OOB control */ + if (port->portnum == 0) + oob_bank = OOB_REG_BANK; + else if (port->portnum == 1) + oob_bank = OOB1_REG_BANK; + else + return -EINVAL; + + val = 0x0; + val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, oob_bank, OOB_CTRL1, 0x0, val); + + val = 0x0; + val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, oob_bank, OOB_CTRL2, 0x0, val); + + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL2, + ~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT), + 0x0c << PLL_ACTRL2_SELDIV_SHIFT); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CONTROL, + 0xff0, 0x4f0); + + val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR; + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, val); + val = PLLCONTROL_0_SEQ_START; + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, 0); + mdelay(10); + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, val); + + /* Wait for pll_seq_done bit */ + try = 50; + while (--try) { + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +/* SR PHY PLL0 registers */ +#define SR_PLL0_ACTRL6_MAGIC 0xa + +/* SR PHY PLL1 registers */ +#define SR_PLL1_ACTRL2_MAGIC 0x32 +#define SR_PLL1_ACTRL3_MAGIC 0x2 +#define SR_PLL1_ACTRL4_MAGIC 0x3e8 + +static int brcm_sr_sata_init(struct brcm_sata_port *port) +{ + struct device *dev = port->phy_priv->dev; + unsigned int val, try; + + /* Configure PHY PLL register bank 1 */ + val = SR_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = SR_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = SR_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY PLL register bank 0 */ + val = SR_PLL0_ACTRL6_MAGIC; + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + do { + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } while (try); + + if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + /* Invert Tx polarity */ + brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL0, + ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP); + + /* Configure OOB control to handle 100MHz reference clock */ + val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) | + (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) | + (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) | + (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT)); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) | + (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) | + (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT)); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + return 0; +} + +static int brcm_dsl_sata_init(struct brcm_sata_port *port) +{ + struct device *dev = port->phy_priv->dev; + unsigned int try; + u32 tmp; + + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873); + + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + 0, 0x3089); + usleep_range(1000, 2000); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + 0, 0x3088); + usleep_range(1000, 2000); + + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0, + 0, 0x3000); + + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0, + 0, 0x3000); + usleep_range(1000, 2000); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64); + usleep_range(1000, 2000); + + /* Acquire PLL lock */ + try = 50; + while (try) { + tmp = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } + + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +static int brcm_sata_phy_init(struct phy *phy) +{ + int rc; + struct brcm_sata_port *port = phy_get_drvdata(phy); + + switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_16NM: + rc = brcm_stb_sata_16nm_init(port); + break; + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_STB_40NM: + rc = brcm_stb_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_NS2: + rc = brcm_ns2_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_NSP: + rc = brcm_nsp_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_SR: + rc = brcm_sr_sata_init(port); + break; + case BRCM_SATA_PHY_DSL_28NM: + rc = brcm_dsl_sata_init(port); + break; + default: + rc = -ENODEV; + } + + return rc; +} + +static void brcm_stb_sata_calibrate(struct brcm_sata_port *port) +{ + u32 tmp = BIT(8); + + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, tmp); +} + +static int brcm_sata_phy_calibrate(struct phy *phy) +{ + struct brcm_sata_port *port = phy_get_drvdata(phy); + int rc = -EOPNOTSUPP; + + switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_STB_40NM: + brcm_stb_sata_calibrate(port); + rc = 0; + break; + default: + break; + } + + return rc; +} + +static const struct phy_ops phy_ops = { + .init = brcm_sata_phy_init, + .calibrate = brcm_sata_phy_calibrate, + .owner = THIS_MODULE, +}; + +static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7216-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_16NM }, + { .compatible = "brcm,bcm7445-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_28NM }, + { .compatible = "brcm,bcm7425-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_40NM }, + { .compatible = "brcm,iproc-ns2-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, + { .compatible = "brcm,iproc-nsp-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NSP }, + { .compatible = "brcm,iproc-sr-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_SR }, + { .compatible = "brcm,bcm63138-sata-phy", + .data = (void *)BRCM_SATA_PHY_DSL_28NM }, + {}, +}; +MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); + +static int brcm_sata_phy_probe(struct platform_device *pdev) +{ + const char *rxaeq_mode; + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node, *child; + const struct of_device_id *of_id; + struct brcm_sata_phy *priv; + struct phy_provider *provider; + int ret, count = 0; + + if (of_get_child_count(dn) == 0) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + dev_set_drvdata(dev, priv); + priv->dev = dev; + + priv->phy_base = devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(priv->phy_base)) + return PTR_ERR(priv->phy_base); + + of_id = of_match_node(brcm_sata_phy_of_match, dn); + if (of_id) + priv->version = (enum brcm_sata_phy_version)of_id->data; + else + priv->version = BRCM_SATA_PHY_STB_28NM; + + if (priv->version == BRCM_SATA_PHY_IPROC_NS2) { + priv->ctrl_base = devm_platform_ioremap_resource_byname(pdev, "phy-ctrl"); + if (IS_ERR(priv->ctrl_base)) + return PTR_ERR(priv->ctrl_base); + } + + for_each_available_child_of_node(dn, child) { + unsigned int id; + struct brcm_sata_port *port; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property in node %pOFn\n", + child); + ret = -EINVAL; + goto put_child; + } + + if (id >= MAX_PORTS) { + dev_err(dev, "invalid reg: %u\n", id); + ret = -EINVAL; + goto put_child; + } + if (priv->phys[id].phy) { + dev_err(dev, "already registered port %u\n", id); + ret = -EINVAL; + goto put_child; + } + + port = &priv->phys[id]; + port->portnum = id; + port->phy_priv = priv; + port->phy = devm_phy_create(dev, child, &phy_ops); + port->rxaeq_mode = RXAEQ_MODE_OFF; + if (!of_property_read_string(child, "brcm,rxaeq-mode", + &rxaeq_mode)) + port->rxaeq_mode = rxaeq_to_val(rxaeq_mode); + if (port->rxaeq_mode == RXAEQ_MODE_MANUAL) + of_property_read_u32(child, "brcm,rxaeq-value", + &port->rxaeq_val); + + of_property_read_u32(child, "brcm,tx-amplitude-millivolt", + &port->tx_amplitude_val); + + port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); + if (IS_ERR(port->phy)) { + dev_err(dev, "failed to create PHY\n"); + ret = PTR_ERR(port->phy); + goto put_child; + } + + phy_set_drvdata(port->phy, port); + count++; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "could not register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_info(dev, "registered %d port(s)\n", count); + + return 0; +put_child: + of_node_put(child); + return ret; +} + +static struct platform_driver brcm_sata_phy_driver = { + .probe = brcm_sata_phy_probe, + .driver = { + .of_match_table = brcm_sata_phy_of_match, + .name = "brcm-sata-phy", + } +}; +module_platform_driver(brcm_sata_phy_driver); + +MODULE_DESCRIPTION("Broadcom SATA PHY driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marc Carino"); +MODULE_AUTHOR("Brian Norris"); +MODULE_ALIAS("platform:phy-brcm-sata"); diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c new file mode 100644 index 000000000..3b374b37b --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -0,0 +1,436 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Broadcom */ + +/* + * This module contains USB PHY initialization for power up and S3 resume + * for newer Synopsys based USB hardware first used on the bcm7216. + */ + +#include <linux/delay.h> +#include <linux/io.h> + +#include <linux/soc/brcmstb/brcmstb.h> +#include "phy-brcm-usb-init.h" + +#define PHY_LOCK_TIMEOUT_MS 200 + +/* Register definitions for syscon piarbctl registers */ +#define PIARBCTL_CAM 0x00 +#define PIARBCTL_SPLITTER 0x04 +#define PIARBCTL_MISC 0x08 +#define PIARBCTL_MISC_SECURE_MASK 0x80000000 +#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 +#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 +#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 +#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 +#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 +#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 +#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f + +#define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ + PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ + PIARBCTL_MISC_USB_PRIORITY_MASK | \ + PIARBCTL_MISC_USB_MEM_PAGE_MASK) + +/* Register definitions for the USB CTRL block */ +#define USB_CTRL_SETUP 0x00 +#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 +#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 +#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 +#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 +#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 +#define USB_CTRL_SETUP_IPP_MASK 0x00000020 +#define USB_CTRL_SETUP_IOC_MASK 0x00000010 +#define USB_CTRL_USB_PM 0x04 +#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 +#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 +#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 +#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 +#define USB_CTRL_USB_PM_XHC_PME_EN_MASK 0x00000010 +#define USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK 0x00000008 +#define USB_CTRL_USB_PM_STATUS 0x08 +#define USB_CTRL_USB_DEVICE_CTL1 0x10 +#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 +#define USB_CTRL_TEST_PORT_CTL 0x30 +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e +#define USB_CTRL_TP_DIAG1 0x34 +#define USB_CTLR_TP_DIAG1_wake_MASK 0x00000002 +#define USB_CTRL_CTLR_CSHCR 0x50 +#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK 0x00040000 + +/* Register definitions for the USB_PHY block in 7211b0 */ +#define USB_PHY_PLL_CTL 0x00 +#define USB_PHY_PLL_CTL_PLL_RESETB_MASK 0x40000000 +#define USB_PHY_PLL_LDO_CTL 0x08 +#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 +#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK 0x00000002 +#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK 0x00000001 +#define USB_PHY_UTMI_CTL_1 0x04 +#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 +#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c +#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 +#define USB_PHY_IDDQ 0x1c +#define USB_PHY_IDDQ_phy_iddq_MASK 0x00000001 +#define USB_PHY_STATUS 0x20 +#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +/* Register definitions for the MDIO registers in the DWC2 block of + * the 7211b0. + * NOTE: The PHY's MDIO registers are only accessible through the + * legacy DesignWare USB controller even though it's not being used. + */ +#define USB_GMDIOCSR 0 +#define USB_GMDIOGEN 4 + +/* Register definitions for the BDC EC block in 7211b0 */ +#define BDC_EC_AXIRDA 0x0c +#define BDC_EC_AXIRDA_RTS_MASK 0xf0000000 +#define BDC_EC_AXIRDA_RTS_SHIFT 28 + + +static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x59020000 | (addr << 18) | data, + usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; +} + +static uint16_t __maybe_unused usb_mdio_read_7211b0( + struct brcm_usb_init_params *params, uint8_t addr) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; +} + +static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) +{ + /* select bank */ + usb_mdio_write_7211b0(params, 0x1f, 0x80a0); + + /* Set the eye */ + usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); +} + +static void xhci_soft_reset(struct brcm_usb_init_params *params, + int on_off) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Assert reset */ + if (on_off) + USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB); + /* De-assert reset */ + else + USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); +} + +static void usb_init_ipp(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + + pr_debug("%s\n", __func__); + + orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + if (params->ipp != 2) + /* override ipp strap pin (if it exits) */ + reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL)); + + /* Override the default OC and PP polarity */ + reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); + if (params->ioc) + reg |= USB_CTRL_MASK(SETUP, IOC); + if (params->ipp == 1) + reg |= USB_CTRL_MASK(SETUP, IPP); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + /* + * If we're changing IPP, make sure power is off long enough + * to turn off any connected devices. + */ + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) + msleep(50); +} + +static void syscon_piarbctl_init(struct regmap *rmap) +{ + /* Switch from legacy USB OTG controller to new STB USB controller */ + regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, + PIARBCTL_MISC_USB_SELECT_MASK | + PIARBCTL_MISC_USB_4G_SDRAM_MASK); +} + +static void usb_init_common(struct brcm_usb_init_params *params) +{ + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= params->mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + switch (params->mode) { + case USB_CTLR_MODE_HOST: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + default: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + } +} + +static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params, + bool enable) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en); + else + USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en); +} + +static void usb_wake_enable_7216(struct brcm_usb_init_params *params, + bool enable) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, USB_PM, XHC_PME_EN); + else + USB_CTRL_UNSET(ctrl, USB_PM, XHC_PME_EN); +} + +static void usb_init_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + + usb_wake_enable_7211b0(params, false); + if (!params->wake_enabled) { + + /* undo possible suspend settings */ + brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + + /* temporarily enable FSM so PHY comes up properly */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + } + + /* Init the PHY */ + reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK | + USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK | + USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ + while (timeout_ms-- > 0) { + reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); + if (reg & USB_PHY_STATUS_pll_lock_MASK) + break; + usleep_range(1000, 2000); + } + + /* Set the PHY_MODE */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; + reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + usb_init_common(params); + + /* + * The BDC controller will get occasional failures with + * the default "Read Transaction Size" of 6 (1024 bytes). + * Set it to 4 (256 bytes). + */ + if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) { + reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA); + reg &= ~BDC_EC_AXIRDA_RTS_MASK; + reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT); + brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA); + } + + /* + * Disable FSM, otherwise the PHY will auto suspend when no + * device is connected and will be reset on resume. + */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + usb2_eye_fix_7211b0(params); +} + +static void usb_init_common_7216(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + USB_CTRL_UNSET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN); + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + + usb_wake_enable_7216(params, false); + usb_init_common(params); +} + +static void usb_init_xhci(struct brcm_usb_init_params *params) +{ + pr_debug("%s\n", __func__); + + xhci_soft_reset(params, 0); +} + +static void usb_uninit_common_7216(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + if (params->wake_enabled) { + /* Switch to using slower clock during suspend to save power */ + USB_CTRL_SET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN); + usb_wake_enable_7216(params, true); + } else { + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + } +} + +static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (params->wake_enabled) { + USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN); + usb_wake_enable_7211b0(params, true); + } else { + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK, + usb_phy + USB_PHY_IDDQ); + } + +} + +static void usb_uninit_xhci(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + if (!params->wake_enabled) + xhci_soft_reset(params, 1); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + return reg; +} + +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +} + +static const struct brcm_usb_init_ops bcm7216_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7216, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_7216, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +static const struct brcm_usb_init_ops bcm7211b0_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_7211b0, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7216"; + params->ops = &bcm7216_ops; +} + +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; +} diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c new file mode 100644 index 000000000..dddcbd3cd --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -0,0 +1,1055 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions + * + * Copyright (C) 2014-2017 Broadcom + */ + +/* + * This module contains USB PHY initialization for power up and S3 resume + */ + +#include <linux/delay.h> +#include <linux/io.h> + +#include <linux/soc/brcmstb/brcmstb.h> +#include "phy-brcm-usb-init.h" + +#define PHY_PORTS 2 +#define PHY_PORT_SELECT_0 0 +#define PHY_PORT_SELECT_1 0x1000 + +/* Register definitions for the USB CTRL block */ +#define USB_CTRL_SETUP 0x00 +#define USB_CTRL_SETUP_IOC_MASK 0x00000010 +#define USB_CTRL_SETUP_IPP_MASK 0x00000020 +#define USB_CTRL_SETUP_BABO_MASK 0x00000001 +#define USB_CTRL_SETUP_FNHW_MASK 0x00000002 +#define USB_CTRL_SETUP_FNBO_MASK 0x00000004 +#define USB_CTRL_SETUP_WABO_MASK 0x00000008 +#define USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK 0x00002000 /* option */ +#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 /* option */ +#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 /* option */ +#define USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK 0X00020000 /* option */ +#define USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK 0x00010000 /* option */ +#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 /* option */ +#define USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK 0x04000000 /* option */ +#define USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK 0x08000000 /* opt */ +#define USB_CTRL_SETUP_OC3_DISABLE_MASK 0xc0000000 /* option */ +#define USB_CTRL_PLL_CTL 0x04 +#define USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK 0x08000000 +#define USB_CTRL_PLL_CTL_PLL_RESETB_MASK 0x40000000 +#define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ +#define USB_CTRL_EBRIDGE 0x0c +#define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ +#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK 0x00000f80 /* option */ +#define USB_CTRL_OBRIDGE 0x10 +#define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 +#define USB_CTRL_MDIO 0x14 +#define USB_CTRL_MDIO2 0x18 +#define USB_CTRL_UTMI_CTL_1 0x2c +#define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 +#define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK 0x08000000 +#define USB_CTRL_USB_PM 0x34 +#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 /* option */ +#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 /* option */ +#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK 0x40000000 /* option */ +#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 /* option */ +#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 /* option */ +#define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK 0x30000000 /* option */ +#define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK 0x00300000 /* option */ +#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK 0x00000001 +#define USB_CTRL_USB_PM_STATUS 0x38 +#define USB_CTRL_USB30_CTL1 0x60 +#define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK 0x00000010 +#define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK 0x00010000 +#define USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK 0x00020000 /* option */ +#define USB_CTRL_USB30_CTL1_USB3_IOC_MASK 0x10000000 /* option */ +#define USB_CTRL_USB30_CTL1_USB3_IPP_MASK 0x20000000 /* option */ +#define USB_CTRL_USB30_PCTL 0x70 +#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK 0x00000002 +#define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK 0x00008000 +#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK 0x00020000 +#define USB_CTRL_USB_DEVICE_CTL1 0x90 +#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 /* option */ + +/* Register definitions for the XHCI EC block */ +#define USB_XHCI_EC_IRAADR 0x658 +#define USB_XHCI_EC_IRADAT 0x65c + +enum brcm_family_type { + BRCM_FAMILY_3390A0, + BRCM_FAMILY_4908, + BRCM_FAMILY_7250B0, + BRCM_FAMILY_7271A0, + BRCM_FAMILY_7364A0, + BRCM_FAMILY_7366C0, + BRCM_FAMILY_74371A0, + BRCM_FAMILY_7439B0, + BRCM_FAMILY_7445D0, + BRCM_FAMILY_7260A0, + BRCM_FAMILY_7278A0, + BRCM_FAMILY_COUNT, +}; + +#define USB_BRCM_FAMILY(chip) \ + [BRCM_FAMILY_##chip] = __stringify(chip) + +static const char *family_names[BRCM_FAMILY_COUNT] = { + USB_BRCM_FAMILY(3390A0), + USB_BRCM_FAMILY(4908), + USB_BRCM_FAMILY(7250B0), + USB_BRCM_FAMILY(7271A0), + USB_BRCM_FAMILY(7364A0), + USB_BRCM_FAMILY(7366C0), + USB_BRCM_FAMILY(74371A0), + USB_BRCM_FAMILY(7439B0), + USB_BRCM_FAMILY(7445D0), + USB_BRCM_FAMILY(7260A0), + USB_BRCM_FAMILY(7278A0), +}; + +enum { + USB_CTRL_SETUP_SCB1_EN_SELECTOR, + USB_CTRL_SETUP_SCB2_EN_SELECTOR, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR, + USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR, + USB_CTRL_SETUP_OC3_DISABLE_SELECTOR, + USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR, + USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR, + USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR, + USB_CTRL_USB_PM_USB_PWRDN_SELECTOR, + USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR, + USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR, + USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR, + USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR, + USB_CTRL_USB_PM_SOFT_RESET_SELECTOR, + USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR, + USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR, + USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR, + USB_CTRL_SETUP_ENDIAN_SELECTOR, + USB_CTRL_SELECTOR_COUNT, +}; + +#define USB_CTRL_MASK_FAMILY(params, reg, field) \ + (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) + +#define USB_CTRL_SET_FAMILY(params, reg, field) \ + usb_ctrl_set_family(params, USB_CTRL_##reg, \ + USB_CTRL_##reg##_##field##_SELECTOR) +#define USB_CTRL_UNSET_FAMILY(params, reg, field) \ + usb_ctrl_unset_family(params, USB_CTRL_##reg, \ + USB_CTRL_##reg##_##field##_SELECTOR) + +#define MDIO_USB2 0 +#define MDIO_USB3 BIT(31) + +#define USB_CTRL_SETUP_ENDIAN_BITS ( \ + USB_CTRL_MASK(SETUP, BABO) | \ + USB_CTRL_MASK(SETUP, FNHW) | \ + USB_CTRL_MASK(SETUP, FNBO) | \ + USB_CTRL_MASK(SETUP, WABO)) + +#ifdef __LITTLE_ENDIAN +#define ENDIAN_SETTINGS ( \ + USB_CTRL_MASK(SETUP, BABO) | \ + USB_CTRL_MASK(SETUP, FNHW)) +#else +#define ENDIAN_SETTINGS ( \ + USB_CTRL_MASK(SETUP, FNHW) | \ + USB_CTRL_MASK(SETUP, FNBO) | \ + USB_CTRL_MASK(SETUP, WABO)) +#endif + +struct id_to_type { + u32 id; + int type; +}; + +static const struct id_to_type id_to_type_table[] = { + { 0x33900000, BRCM_FAMILY_3390A0 }, + { 0x72500010, BRCM_FAMILY_7250B0 }, + { 0x72600000, BRCM_FAMILY_7260A0 }, + { 0x72550000, BRCM_FAMILY_7260A0 }, + { 0x72680000, BRCM_FAMILY_7271A0 }, + { 0x72710000, BRCM_FAMILY_7271A0 }, + { 0x73640000, BRCM_FAMILY_7364A0 }, + { 0x73660020, BRCM_FAMILY_7366C0 }, + { 0x07437100, BRCM_FAMILY_74371A0 }, + { 0x74390010, BRCM_FAMILY_7439B0 }, + { 0x74450030, BRCM_FAMILY_7445D0 }, + { 0x72780000, BRCM_FAMILY_7278A0 }, + { 0, BRCM_FAMILY_7271A0 }, /* default */ +}; + +static const u32 +usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { + /* 3390B0 */ + [BRCM_FAMILY_3390A0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, + USB_CTRL_SETUP_OC3_DISABLE_MASK, + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 4908 */ + [BRCM_FAMILY_4908] = { + 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ + 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ + 0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ + 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */ + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK */ + 0, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7250b0 */ + [BRCM_FAMILY_7250B0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ + USB_CTRL_SETUP_OC3_DISABLE_MASK, + USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, + 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7271a0 */ + [BRCM_FAMILY_7271A0] = { + 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ + 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, + USB_CTRL_SETUP_OC3_DISABLE_MASK, + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, + USB_CTRL_USB_PM_SOFT_RESET_MASK, + USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, + USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, + USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7364a0 */ + [BRCM_FAMILY_7364A0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ + USB_CTRL_SETUP_OC3_DISABLE_MASK, + USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, + 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7366c0 */ + [BRCM_FAMILY_7366C0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ + USB_CTRL_SETUP_OC3_DISABLE_MASK, + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 74371A0 */ + [BRCM_FAMILY_74371A0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, + 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ + 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */ + USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ + USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB30_CTL1_USB3_IOC_MASK, + USB_CTRL_USB30_CTL1_USB3_IPP_MASK, + 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */ + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7439B0 */ + [BRCM_FAMILY_7439B0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, + USB_CTRL_SETUP_OC3_DISABLE_MASK, + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7445d0 */ + [BRCM_FAMILY_7445D0] = { + USB_CTRL_SETUP_SCB1_EN_MASK, + USB_CTRL_SETUP_SCB2_EN_MASK, + USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, + 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ + USB_CTRL_SETUP_OC3_DISABLE_MASK, + USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, + 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ + USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ + 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7260a0 */ + [BRCM_FAMILY_7260A0] = { + 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ + 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ + USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, + USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, + USB_CTRL_SETUP_OC3_DISABLE_MASK, + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, + USB_CTRL_USB_PM_SOFT_RESET_MASK, + USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, + USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, + USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, + ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ + }, + /* 7278a0 */ + [BRCM_FAMILY_7278A0] = { + 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ + 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ + 0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */ + USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, + USB_CTRL_SETUP_OC3_DISABLE_MASK, + 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ + USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, + USB_CTRL_USB_PM_USB_PWRDN_MASK, + 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ + 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ + USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, + USB_CTRL_USB_PM_SOFT_RESET_MASK, + 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ + 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ + 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */ + 0, /* USB_CTRL_SETUP ENDIAN bits */ + }, +}; + +static inline +void usb_ctrl_unset_family(struct brcm_usb_init_params *params, + u32 reg_offset, u32 field) +{ + u32 mask; + + mask = params->usb_reg_bits_map[field]; + brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); +}; + +static inline +void usb_ctrl_set_family(struct brcm_usb_init_params *params, + u32 reg_offset, u32 field) +{ + u32 mask; + + mask = params->usb_reg_bits_map[field]; + brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); +}; + +static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) +{ + u32 data; + + data = (reg << 16) | mode; + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data |= (1 << 24); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data &= ~(1 << 24); + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); + + return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; +} + +static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, + u32 val, int mode) +{ + u32 data; + + data = (reg << 16) | val | mode; + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data |= (1 << 25); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data &= ~(1 << 25); + + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); +} + +static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base) +{ + /* first disable FSM but also leave it that way */ + /* to allow normal suspend/resume */ + USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN); + USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1); + + /* reset USB 2.0 PLL */ + USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB); + /* PLL reset period */ + udelay(1); + USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB); + /* Give PLL enough time to lock */ + usleep_range(1000, 2000); +} + +static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base) +{ + /* Increase USB 2.0 TX level to meet spec requirement */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2); + brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2); +} + +static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base) +{ + /* Set correct window for PLL lock detect */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3); +} + +static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base) +{ + u32 val; + + /* Re-enable USB 3.0 pipe reset */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); + val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200; + brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3); +} + +static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base) +{ + u32 val, ofs; + int ii; + + ofs = 0; + for (ii = 0; ii < PHY_PORTS; ++ii) { + /* Set correct default for sigdet */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs), + MDIO_USB3); + val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3); + val = (val & ~0x800f) | 0x800d; + brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3); + ofs = PHY_PORT_SELECT_1; + } +} + +static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base) +{ + u32 val, ofs; + int ii; + + ofs = 0; + for (ii = 0; ii < PHY_PORTS; ++ii) { + /* Set correct default for SKIP align */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs), + MDIO_USB3); + val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200; + brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); + ofs = PHY_PORT_SELECT_1; + } +} + +static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base) +{ + u32 val, ofs; + int ii; + + ofs = 0; + for (ii = 0; ii < PHY_PORTS; ++ii) { + /* Let EQ freeze after TSEQ */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs), + MDIO_USB3); + val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3); + val &= ~0x0008; + brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); + ofs = PHY_PORT_SELECT_1; + } +} + +static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) +{ + u32 ofs; + int ii; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; + + /* + * On newer B53 based SoC's, the reference clock for the + * 3.0 PLL has been changed from 50MHz to 54MHz so the + * PLL needs to be reprogrammed. + * See SWLINUX-4006. + * + * On the 7364C0, the reference clock for the + * 3.0 PLL has been changed from 50MHz to 54MHz to + * work around a MOCA issue. + * See SWLINUX-4169. + */ + switch (params->selected_family) { + case BRCM_FAMILY_3390A0: + case BRCM_FAMILY_4908: + case BRCM_FAMILY_7250B0: + case BRCM_FAMILY_7366C0: + case BRCM_FAMILY_74371A0: + case BRCM_FAMILY_7439B0: + case BRCM_FAMILY_7445D0: + case BRCM_FAMILY_7260A0: + return; + case BRCM_FAMILY_7364A0: + if (BRCM_REV(params->family_id) < 0x20) + return; + break; + } + + /* set USB 3.0 PLL to accept 54Mhz reference clock */ + USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); + + brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3); + + /* both ports */ + ofs = 0; + for (ii = 0; ii < PHY_PORTS; ++ii) { + brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs), + MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs), + MDIO_USB3); + brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3); + ofs = PHY_PORT_SELECT_1; + } + + /* restart PLL sequence */ + USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); + /* Give PLL enough time to lock */ + usleep_range(1000, 2000); +} + +static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) +{ + u32 val; + + /* Enable USB 3.0 TX spread spectrum */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3); + val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; + brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); + + /* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers, + * which should have been adequate. However, due to a bug in the + * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26). + */ + brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3); + val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; + brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); +} + +static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; + + brcmusb_usb3_pll_fix(ctrl_base); + brcmusb_usb3_pll_54mhz(params); + brcmusb_usb3_ssc_enable(ctrl_base); + brcmusb_usb3_enable_pipe_reset(ctrl_base); + brcmusb_usb3_enable_sigdet(ctrl_base); + brcmusb_usb3_enable_skip_align(ctrl_base); + brcmusb_usb3_unfreeze_aeq(ctrl_base); +} + +static void brcmusb_memc_fix(struct brcm_usb_init_params *params) +{ + u32 prid; + + if (params->selected_family != BRCM_FAMILY_7445D0) + return; + /* + * This is a workaround for HW7445-1869 where a DMA write ends up + * doing a read pre-fetch after the end of the DMA buffer. This + * causes a problem when the DMA buffer is at the end of physical + * memory, causing the pre-fetch read to access non-existent memory, + * and the chip bondout has MEMC2 disabled. When the pre-fetch read + * tries to use the disabled MEMC2, it hangs the bus. The workaround + * is to disable MEMC2 access in the usb controller which avoids + * the hang. + */ + + prid = params->product_id & 0xfffff000; + switch (prid) { + case 0x72520000: + case 0x74480000: + case 0x74490000: + case 0x07252000: + case 0x07448000: + case 0x07449000: + USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN); + } +} + +static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) +{ + void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; + u32 val; + + if (params->family_id != 0x74371000 || !xhci_ec_base) + return; + brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); + val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + + /* set cfg_pick_ss_lock */ + val |= (1 << 27); + brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + + /* Reset USB 3.0 PHY for workaround to take effect */ + USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); +} + +static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, + int on_off) +{ + /* Assert reset */ + if (on_off) { + if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) + USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); + else + USB_CTRL_UNSET_FAMILY(params, + USB30_CTL1, XHC_SOFT_RESETB); + } else { /* De-assert reset */ + if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) + USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); + else + USB_CTRL_SET_FAMILY(params, USB30_CTL1, + XHC_SOFT_RESETB); + } +} + +/* + * Return the best map table family. The order is: + * - exact match of chip and major rev + * - exact match of chip and closest older major rev + * - default chip/rev. + * NOTE: The minor rev is always ignored. + */ +static enum brcm_family_type get_family_type( + struct brcm_usb_init_params *params) +{ + int last_type = -1; + u32 last_family = 0; + u32 family_no_major; + unsigned int x; + u32 family; + + family = params->family_id & 0xfffffff0; + family_no_major = params->family_id & 0xffffff00; + for (x = 0; id_to_type_table[x].id; x++) { + if (family == id_to_type_table[x].id) + return id_to_type_table[x].type; + if (family_no_major == (id_to_type_table[x].id & 0xffffff00)) + if (family > id_to_type_table[x].id && + last_family < id_to_type_table[x].id) { + last_family = id_to_type_table[x].id; + last_type = id_to_type_table[x].type; + } + } + + /* If no match, return the default family */ + if (last_type == -1) + return id_to_type_table[x].type; + return last_type; +} + +static void usb_init_ipp(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + + /* Starting with the 7445d0, there are no longer separate 3.0 + * versions of IOC and IPP. + */ + if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) { + if (params->ioc) + USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC); + if (params->ipp == 1) + USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); + } + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + orig_reg = reg; + if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) + /* Never use the strap, it's going away. */ + reg &= ~(USB_CTRL_MASK_FAMILY(params, + SETUP, + STRAP_CC_DRD_MODE_ENABLE_SEL)); + if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) + /* override ipp strap pin (if it exits) */ + if (params->ipp != 2) + reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, + STRAP_IPP_SEL)); + + /* Override the default OC and PP polarity */ + reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); + if (params->ioc) + reg |= USB_CTRL_MASK(SETUP, IOC); + if (params->ipp == 1) + reg |= USB_CTRL_MASK(SETUP, IPP); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + /* + * If we're changing IPP, make sure power is off long enough + * to turn off any connected devices. + */ + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) + msleep(50); +} + +static void usb_wake_enable(struct brcm_usb_init_params *params, + bool enable) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); + else + USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); +} + +static void usb_init_common(struct brcm_usb_init_params *params) +{ + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Clear any pending wake conditions */ + usb_wake_enable(params, false); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); + + /* Take USB out of power down */ + if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { + USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + } + + if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) { + USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + } + + if (params->selected_family != BRCM_FAMILY_74371A0 && + (BRCM_ID(params->family_id) != 0x7364)) + /* + * HW7439-637: 7439a0 and its derivatives do not have large + * enough descriptor storage for this. + */ + USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN); + + /* Block auto PLL suspend by USB2 PHY (Sasi) */ + USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + if (params->selected_family == BRCM_FAMILY_7364A0) + /* Suppress overcurrent indication from USB30 ports for A0 */ + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); + + brcmusb_usb_phy_ldo_fix(ctrl); + brcmusb_usb2_eye_fix(ctrl); + + /* + * Make sure the second and third memory controller + * interfaces are enabled if they exist. + */ + if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN)) + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); + if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + brcmusb_memc_fix(params); + + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + reg |= params->mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { + switch (params->mode) { + case USB_CTLR_MODE_HOST: + USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); + break; + default: + USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); + USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); + break; + } + } + if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) { + if (params->mode == USB_CTLR_MODE_TYPEC_PD) + USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE); + else + USB_CTRL_UNSET_FAMILY(params, SETUP, + CC_DRD_MODE_ENABLE); + } +} + +static void usb_init_eohci(struct brcm_usb_init_params *params) +{ + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) + USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); + + if (params->selected_family == BRCM_FAMILY_7366C0) + /* + * Don't enable this so the memory controller doesn't read + * into memory holes. NOTE: This bit is low true on 7366C0. + */ + USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); + + /* Setup the endian bits */ + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + if (params->selected_family == BRCM_FAMILY_7271A0) + /* Enable LS keep alive fix for certain keyboards */ + USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); + + if (params->family_id == 0x72550000) { + /* + * Make the burst size 512 bytes to fix a hardware bug + * on the 7255a0. See HW7255-24. + */ + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); + reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); + reg |= 0x800; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); + } +} + +static void usb_init_xhci(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + + if (BRCM_ID(params->family_id) == 0x7366) { + /* + * The PHY3_SOFT_RESETB bits default to the wrong state. + */ + USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB); + USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1); + } + + /* + * Kick start USB3 PHY + * Make sure it's low to insure a rising edge. + */ + USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); + USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); + + brcmusb_usb3_phy_workarounds(params); + brcmusb_xhci_soft_reset(params, 0); + brcmusb_usb3_otp_fix(params); +} + +static void usb_uninit_common(struct brcm_usb_init_params *params) +{ + if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) + USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); + + if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) + USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); + if (params->wake_enabled) + usb_wake_enable(params, true); +} + +static void usb_uninit_eohci(struct brcm_usb_init_params *params) +{ +} + +static void usb_uninit_xhci(struct brcm_usb_init_params *params) +{ + brcmusb_xhci_soft_reset(params, 1); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, + PHY3_IDDQ_OVERRIDE); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + } + return reg; +} + +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } +} + +static const struct brcm_usb_init_ops bcm7445_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, + .init_eohci = usb_init_eohci, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_eohci = usb_uninit_eohci, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params) +{ + int fam; + + fam = BRCM_FAMILY_4908; + params->selected_family = fam; + params->usb_reg_bits_map = + &usb_reg_bits_map_table[fam][0]; + params->family_name = family_names[fam]; + params->ops = &bcm7445_ops; +} + +void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) +{ + int fam; + + pr_debug("%s\n", __func__); + + fam = get_family_type(params); + params->selected_family = fam; + params->usb_reg_bits_map = + &usb_reg_bits_map_table[fam][0]; + params->family_name = family_names[fam]; + params->ops = &bcm7445_ops; +} diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h new file mode 100644 index 000000000..3236e9498 --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb-init.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-2017 Broadcom + */ + +#ifndef _USB_BRCM_COMMON_INIT_H +#define _USB_BRCM_COMMON_INIT_H + +#include <linux/regmap.h> + +#define USB_CTLR_MODE_HOST 0 +#define USB_CTLR_MODE_DEVICE 1 +#define USB_CTLR_MODE_DRD 2 +#define USB_CTLR_MODE_TYPEC_PD 3 + +enum brcmusb_reg_sel { + BRCM_REGS_CTRL = 0, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + BRCM_REGS_BDC_EC, + BRCM_REGS_MAX +}; + +#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) +#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) +#define USB_CTRL_MASK(reg, field) \ + USB_CTRL_##reg##_##field##_MASK +#define USB_CTRL_SET(base, reg, field) \ + brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \ + USB_CTRL_##reg##_##field##_MASK) +#define USB_CTRL_UNSET(base, reg, field) \ + brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \ + USB_CTRL_##reg##_##field##_MASK) + +struct brcm_usb_init_params; + +struct brcm_usb_init_ops { + void (*init_ipp)(struct brcm_usb_init_params *params); + void (*init_common)(struct brcm_usb_init_params *params); + void (*init_eohci)(struct brcm_usb_init_params *params); + void (*init_xhci)(struct brcm_usb_init_params *params); + void (*uninit_common)(struct brcm_usb_init_params *params); + void (*uninit_eohci)(struct brcm_usb_init_params *params); + void (*uninit_xhci)(struct brcm_usb_init_params *params); + int (*get_dual_select)(struct brcm_usb_init_params *params); + void (*set_dual_select)(struct brcm_usb_init_params *params, int mode); +}; + +struct brcm_usb_init_params { + void __iomem *regs[BRCM_REGS_MAX]; + int ioc; + int ipp; + int mode; + u32 family_id; + u32 product_id; + int selected_family; + const char *family_name; + const u32 *usb_reg_bits_map; + const struct brcm_usb_init_ops *ops; + struct regmap *syscon_piarbctl; + bool wake_enabled; +}; + +void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params); + +static inline u32 brcm_usb_readl(void __iomem *addr) +{ + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(addr); + else + return readl_relaxed(addr); +} + +static inline void brcm_usb_writel(u32 val, void __iomem *addr) +{ + /* See brcmnand_readl() comments */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, addr); + else + writel_relaxed(val, addr); +} + +static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask) +{ + brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg); +}; + +static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask) +{ + brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg); +}; + +static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_ipp) + ini->ops->init_ipp(ini); +} + +static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_common) + ini->ops->init_common(ini); +} + +static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_eohci) + ini->ops->init_eohci(ini); +} + +static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_xhci) + ini->ops->init_xhci(ini); +} + +static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_common) + ini->ops->uninit_common(ini); +} + +static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_eohci) + ini->ops->uninit_eohci(ini); +} + +static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_xhci) + ini->ops->uninit_xhci(ini); +} + +static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini) +{ + if (ini->ops->get_dual_select) + return ini->ops->get_dual_select(ini); + return 0; +} + +static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini, + int mode) +{ + if (ini->ops->set_dual_select) + ini->ops->set_dual_select(ini, mode); +} + +#endif /* _USB_BRCM_COMMON_INIT_H */ diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c new file mode 100644 index 000000000..7a4c328ba --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -0,0 +1,682 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * phy-brcm-usb.c - Broadcom USB Phy Driver + * + * Copyright (C) 2015-2017 Broadcom + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/soc/brcmstb/brcmstb.h> +#include <dt-bindings/phy/phy.h> +#include <linux/mfd/syscon.h> +#include <linux/suspend.h> + +#include "phy-brcm-usb-init.h" + +static DEFINE_MUTEX(sysfs_lock); + +enum brcm_usb_phy_id { + BRCM_USB_PHY_2_0 = 0, + BRCM_USB_PHY_3_0, + BRCM_USB_PHY_ID_MAX +}; + +struct value_to_name_map { + int value; + const char *name; +}; + +struct match_chip_info { + void (*init_func)(struct brcm_usb_init_params *params); + u8 required_regs[BRCM_REGS_MAX + 1]; + u8 optional_reg; +}; + +static const struct value_to_name_map brcm_dr_mode_to_name[] = { + { USB_CTLR_MODE_HOST, "host" }, + { USB_CTLR_MODE_DEVICE, "peripheral" }, + { USB_CTLR_MODE_DRD, "drd" }, + { USB_CTLR_MODE_TYPEC_PD, "typec-pd" } +}; + +static const struct value_to_name_map brcm_dual_mode_to_name[] = { + { 0, "host" }, + { 1, "device" }, + { 2, "auto" }, +}; + +struct brcm_usb_phy { + struct phy *phy; + unsigned int id; + bool inited; +}; + +struct brcm_usb_phy_data { + struct brcm_usb_init_params ini; + bool has_eohci; + bool has_xhci; + struct clk *usb_20_clk; + struct clk *usb_30_clk; + struct clk *suspend_clk; + struct mutex mutex; /* serialize phy init */ + int init_count; + int wake_irq; + struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; + struct notifier_block pm_notifier; + bool pm_active; +}; + +static s8 *node_reg_names[BRCM_REGS_MAX] = { + "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" +}; + +static int brcm_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct brcm_usb_phy_data *priv = + container_of(notifier, struct brcm_usb_phy_data, pm_notifier); + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + priv->pm_active = true; + break; + case PM_POST_RESTORE: + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + priv->pm_active = false; + break; + } + return NOTIFY_DONE; +} + +static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) +{ + struct device *dev = dev_id; + + pm_wakeup_event(dev, 0); + + return IRQ_HANDLED; +} + +static int brcm_usb_phy_init(struct phy *gphy) +{ + struct brcm_usb_phy *phy = phy_get_drvdata(gphy); + struct brcm_usb_phy_data *priv = + container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); + + if (priv->pm_active) + return 0; + + /* + * Use a lock to make sure a second caller waits until + * the base phy is inited before using it. + */ + mutex_lock(&priv->mutex); + if (priv->init_count++ == 0) { + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); + clk_prepare_enable(priv->suspend_clk); + brcm_usb_init_common(&priv->ini); + } + mutex_unlock(&priv->mutex); + if (phy->id == BRCM_USB_PHY_2_0) + brcm_usb_init_eohci(&priv->ini); + else if (phy->id == BRCM_USB_PHY_3_0) + brcm_usb_init_xhci(&priv->ini); + phy->inited = true; + dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id, + priv->init_count); + + return 0; +} + +static int brcm_usb_phy_exit(struct phy *gphy) +{ + struct brcm_usb_phy *phy = phy_get_drvdata(gphy); + struct brcm_usb_phy_data *priv = + container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); + + if (priv->pm_active) + return 0; + + dev_dbg(&gphy->dev, "EXIT\n"); + if (phy->id == BRCM_USB_PHY_2_0) + brcm_usb_uninit_eohci(&priv->ini); + if (phy->id == BRCM_USB_PHY_3_0) + brcm_usb_uninit_xhci(&priv->ini); + + /* If both xhci and eohci are gone, reset everything else */ + mutex_lock(&priv->mutex); + if (--priv->init_count == 0) { + brcm_usb_uninit_common(&priv->ini); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); + clk_disable_unprepare(priv->suspend_clk); + } + mutex_unlock(&priv->mutex); + phy->inited = false; + return 0; +} + +static const struct phy_ops brcm_usb_phy_ops = { + .init = brcm_usb_phy_init, + .exit = brcm_usb_phy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *brcm_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct brcm_usb_phy_data *data = dev_get_drvdata(dev); + + /* + * values 0 and 1 are for backward compatibility with + * device tree nodes from older bootloaders. + */ + switch (args->args[0]) { + case 0: + case PHY_TYPE_USB2: + if (data->phys[BRCM_USB_PHY_2_0].phy) + return data->phys[BRCM_USB_PHY_2_0].phy; + dev_warn(dev, "Error, 2.0 Phy not found\n"); + break; + case 1: + case PHY_TYPE_USB3: + if (data->phys[BRCM_USB_PHY_3_0].phy) + return data->phys[BRCM_USB_PHY_3_0].phy; + dev_warn(dev, "Error, 3.0 Phy not found\n"); + break; + } + return ERR_PTR(-ENODEV); +} + +static int name_to_value(const struct value_to_name_map *table, int count, + const char *name, int *value) +{ + int x; + + *value = 0; + for (x = 0; x < count; x++) { + if (sysfs_streq(name, table[x].name)) { + *value = x; + return 0; + } + } + return -EINVAL; +} + +static const char *value_to_name(const struct value_to_name_map *table, int count, + int value) +{ + if (value >= count) + return "unknown"; + return table[value].name; +} + +static ssize_t dr_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", + value_to_name(&brcm_dr_mode_to_name[0], + ARRAY_SIZE(brcm_dr_mode_to_name), + priv->ini.mode)); +} +static DEVICE_ATTR_RO(dr_mode); + +static ssize_t dual_select_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + int value; + int res; + + mutex_lock(&sysfs_lock); + res = name_to_value(&brcm_dual_mode_to_name[0], + ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value); + if (!res) { + brcm_usb_set_dual_select(&priv->ini, value); + res = len; + } + mutex_unlock(&sysfs_lock); + return res; +} + +static ssize_t dual_select_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + int value; + + mutex_lock(&sysfs_lock); + value = brcm_usb_get_dual_select(&priv->ini); + mutex_unlock(&sysfs_lock); + return sprintf(buf, "%s\n", + value_to_name(&brcm_dual_mode_to_name[0], + ARRAY_SIZE(brcm_dual_mode_to_name), + value)); +} +static DEVICE_ATTR_RW(dual_select); + +static struct attribute *brcm_usb_phy_attrs[] = { + &dev_attr_dr_mode.attr, + &dev_attr_dual_select.attr, + NULL +}; + +static const struct attribute_group brcm_usb_phy_group = { + .attrs = brcm_usb_phy_attrs, +}; + +static const struct match_chip_info chip_info_4908 = { + .init_func = &brcm_usb_dvr_init_4908, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + -1, + }, +}; + +static const struct match_chip_info chip_info_7216 = { + .init_func = &brcm_usb_dvr_init_7216, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + -1, + }, +}; + +static const struct match_chip_info chip_info_7211b0 = { + .init_func = &brcm_usb_dvr_init_7211b0, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + -1, + }, + .optional_reg = BRCM_REGS_BDC_EC, +}; + +static const struct match_chip_info chip_info_7445 = { + .init_func = &brcm_usb_dvr_init_7445, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + -1, + }, +}; + +static const struct of_device_id brcm_usb_dt_ids[] = { + { + .compatible = "brcm,bcm4908-usb-phy", + .data = &chip_info_4908, + }, + { + .compatible = "brcm,bcm7216-usb-phy", + .data = &chip_info_7216, + }, + { + .compatible = "brcm,bcm7211-usb-phy", + .data = &chip_info_7211b0, + }, + { + .compatible = "brcm,brcmstb-usb-phy", + .data = &chip_info_7445, + }, + { /* sentinel */ } +}; + +static int brcm_usb_get_regs(struct platform_device *pdev, + enum brcmusb_reg_sel regs, + struct brcm_usb_init_params *ini, + bool optional) +{ + struct resource *res; + + /* Older DT nodes have ctrl and optional xhci_ec by index only */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + node_reg_names[regs]); + if (res == NULL) { + if (regs == BRCM_REGS_CTRL) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + } else if (regs == BRCM_REGS_XHCI_EC) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + /* XHCI_EC registers are optional */ + if (res == NULL) + return 0; + } + if (res == NULL) { + if (optional) { + dev_dbg(&pdev->dev, + "Optional reg %s not found\n", + node_reg_names[regs]); + return 0; + } + dev_err(&pdev->dev, "can't get %s base addr\n", + node_reg_names[regs]); + return 1; + } + } + ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ini->regs[regs])) { + dev_err(&pdev->dev, "can't map %s register space\n", + node_reg_names[regs]); + return 1; + } + return 0; +} + +static int brcm_usb_phy_dvr_init(struct platform_device *pdev, + struct brcm_usb_phy_data *priv, + struct device_node *dn) +{ + struct device *dev = &pdev->dev; + struct phy *gphy = NULL; + int err; + + priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); + if (IS_ERR(priv->usb_20_clk)) { + if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "Clock not found in Device Tree\n"); + priv->usb_20_clk = NULL; + } + err = clk_prepare_enable(priv->usb_20_clk); + if (err) + return err; + + if (priv->has_eohci) { + gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops); + if (IS_ERR(gphy)) { + dev_err(dev, "failed to create EHCI/OHCI PHY\n"); + return PTR_ERR(gphy); + } + priv->phys[BRCM_USB_PHY_2_0].phy = gphy; + priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0; + phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]); + } + + if (priv->has_xhci) { + gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops); + if (IS_ERR(gphy)) { + dev_err(dev, "failed to create XHCI PHY\n"); + return PTR_ERR(gphy); + } + priv->phys[BRCM_USB_PHY_3_0].phy = gphy; + priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0; + phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]); + + priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3"); + if (IS_ERR(priv->usb_30_clk)) { + if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, + "USB3.0 clock not found in Device Tree\n"); + priv->usb_30_clk = NULL; + } + err = clk_prepare_enable(priv->usb_30_clk); + if (err) + return err; + } + + priv->suspend_clk = clk_get(dev, "usb0_freerun"); + if (IS_ERR(priv->suspend_clk)) { + if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(dev, "Suspend Clock not found in Device Tree\n"); + priv->suspend_clk = NULL; + } + + priv->wake_irq = platform_get_irq_byname_optional(pdev, "wake"); + if (priv->wake_irq < 0) + priv->wake_irq = platform_get_irq_byname_optional(pdev, "wakeup"); + if (priv->wake_irq >= 0) { + err = devm_request_irq(dev, priv->wake_irq, + brcm_usb_phy_wake_isr, 0, + dev_name(dev), dev); + if (err < 0) + return err; + device_set_wakeup_capable(dev, 1); + } else { + dev_info(dev, + "Wake interrupt missing, system wake not supported\n"); + } + + return 0; +} + +static int brcm_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct brcm_usb_phy_data *priv; + struct phy_provider *phy_provider; + struct device_node *dn = pdev->dev.of_node; + int err; + const char *mode; + const struct match_chip_info *info; + struct regmap *rmap; + int x; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + priv->ini.family_id = brcmstb_get_family_id(); + priv->ini.product_id = brcmstb_get_product_id(); + + info = of_device_get_match_data(&pdev->dev); + if (!info) + return -ENOENT; + + info->init_func(&priv->ini); + + dev_dbg(dev, "Best mapping table is for %s\n", + priv->ini.family_name); + + of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); + of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); + + priv->ini.mode = USB_CTLR_MODE_HOST; + err = of_property_read_string(dn, "dr_mode", &mode); + if (err == 0) { + name_to_value(&brcm_dr_mode_to_name[0], + ARRAY_SIZE(brcm_dr_mode_to_name), + mode, &priv->ini.mode); + } + if (of_property_read_bool(dn, "brcm,has-xhci")) + priv->has_xhci = true; + if (of_property_read_bool(dn, "brcm,has-eohci")) + priv->has_eohci = true; + + for (x = 0; x < BRCM_REGS_MAX; x++) { + if (info->required_regs[x] >= BRCM_REGS_MAX) + break; + + err = brcm_usb_get_regs(pdev, info->required_regs[x], + &priv->ini, false); + if (err) + return -EINVAL; + } + if (info->optional_reg) { + err = brcm_usb_get_regs(pdev, info->optional_reg, + &priv->ini, true); + if (err) + return -EINVAL; + } + + err = brcm_usb_phy_dvr_init(pdev, priv, dn); + if (err) + return err; + + priv->pm_notifier.notifier_call = brcm_pm_notifier; + register_pm_notifier(&priv->pm_notifier); + + mutex_init(&priv->mutex); + + /* make sure invert settings are correct */ + brcm_usb_init_ipp(&priv->ini); + + /* + * Create sysfs entries for mode. + * Remove "dual_select" attribute if not in dual mode + */ + if (priv->ini.mode != USB_CTLR_MODE_DRD) + brcm_usb_phy_attrs[1] = NULL; + err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group); + if (err) + dev_warn(dev, "Error creating sysfs attributes\n"); + + /* Get piarbctl syscon if it exists */ + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "syscon-piarbctl"); + if (IS_ERR(rmap)) + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "brcm,syscon-piarbctl"); + if (!IS_ERR(rmap)) + priv->ini.syscon_piarbctl = rmap; + + /* start with everything off */ + if (priv->has_xhci) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->has_eohci) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); + + phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int brcm_usb_phy_remove(struct platform_device *pdev) +{ + struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev); + + sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); + unregister_pm_notifier(&priv->pm_notifier); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int brcm_usb_phy_suspend(struct device *dev) +{ + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + + if (priv->init_count) { + dev_dbg(dev, "SUSPEND\n"); + priv->ini.wake_enabled = device_may_wakeup(dev); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); + + /* + * Handle the clocks unless needed for wake. This has + * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks + * and newer XHCI->2.0-clks/3.0-clks. + */ + + if (!priv->ini.wake_enabled) { + if (priv->phys[BRCM_USB_PHY_3_0].inited) + clk_disable_unprepare(priv->usb_30_clk); + if (priv->phys[BRCM_USB_PHY_2_0].inited || + !priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); + } + if (priv->wake_irq >= 0) + enable_irq_wake(priv->wake_irq); + } + return 0; +} + +static int brcm_usb_phy_resume(struct device *dev) +{ + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + + if (!priv->ini.wake_enabled) { + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); + } + brcm_usb_init_ipp(&priv->ini); + + /* + * Initialize anything that was previously initialized. + * Uninitialize anything that wasn't previously initialized. + */ + if (priv->init_count) { + dev_dbg(dev, "RESUME\n"); + if (priv->wake_irq >= 0) + disable_irq_wake(priv->wake_irq); + brcm_usb_init_common(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) { + brcm_usb_init_eohci(&priv->ini); + } else if (priv->has_eohci) { + brcm_usb_uninit_eohci(&priv->ini); + clk_disable_unprepare(priv->usb_20_clk); + } + if (priv->phys[BRCM_USB_PHY_3_0].inited) { + brcm_usb_init_xhci(&priv->ini); + } else if (priv->has_xhci) { + brcm_usb_uninit_xhci(&priv->ini); + clk_disable_unprepare(priv->usb_30_clk); + if (!priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); + } + } else { + if (priv->has_xhci) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->has_eohci) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); + } + priv->ini.wake_enabled = false; + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops brcm_usb_phy_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume) +}; + +MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); + +static struct platform_driver brcm_usb_driver = { + .probe = brcm_usb_phy_probe, + .remove = brcm_usb_phy_remove, + .driver = { + .name = "brcmstb-usb-phy", + .pm = &brcm_usb_phy_pm_ops, + .of_match_table = brcm_usb_dt_ids, + }, +}; + +module_platform_driver(brcm_usb_driver); + +MODULE_ALIAS("platform:brcmstb-usb-phy"); +MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>"); +MODULE_DESCRIPTION("BRCM USB PHY driver"); +MODULE_LICENSE("GPL v2"); |