Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 644 insertions, 0 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
new file mode 100644
index 000000000..d0319bee0
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL0		(0x3c)
+#define SLEEPM					BIT(0)
+#define OPMODE_MASK				GENMASK(4, 3)
+#define OPMODE_NORMAL				(0x00)
+#define OPMODE_NONDRIVING			BIT(3)
+#define TERMSEL					BIT(5)
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL1		(0x40)
+#define XCVRSEL					BIT(0)
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL5		(0x50)
+#define POR					BIT(1)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)
+#define SIDDQ					BIT(2)
+#define RETENABLEN				BIT(3)
+#define FSEL_MASK				GENMASK(6, 4)
+#define FSEL_DEFAULT				(0x3 << 4)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1	(0x58)
+#define VBUSVLDEXTSEL0				BIT(4)
+#define PLLBTUNE				BIT(5)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2	(0x5c)
+#define VREGBYPASS				BIT(0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL1		(0x60)
+#define VBUSVLDEXT0				BIT(0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL2		(0x64)
+#define USB2_AUTO_RESUME			BIT(0)
+#define USB2_SUSPEND_N				BIT(2)
+#define USB2_SUSPEND_N_SEL			BIT(3)
+
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0		(0x6c)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1		(0x70)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2		(0x74)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3		(0x78)
+#define PARAM_OVRD_MASK				0xFF
+
+#define USB2_PHY_USB_PHY_CFG0			(0x94)
+#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN	BIT(0)
+#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN		BIT(1)
+
+#define USB2_PHY_USB_PHY_REFCLK_CTRL		(0xa0)
+#define REFCLK_SEL_MASK				GENMASK(1, 0)
+#define REFCLK_SEL_DEFAULT			(0x2 << 0)
+
+#define HS_DISCONNECT_MASK			GENMASK(2, 0)
+#define SQUELCH_DETECTOR_MASK			GENMASK(7, 5)
+
+#define HS_AMPLITUDE_MASK			GENMASK(3, 0)
+#define PREEMPHASIS_DURATION_MASK		BIT(5)
+#define PREEMPHASIS_AMPLITUDE_MASK		GENMASK(7, 6)
+
+#define HS_RISE_FALL_MASK			GENMASK(1, 0)
+#define HS_CROSSOVER_VOLTAGE_MASK		GENMASK(3, 2)
+#define HS_OUTPUT_IMPEDANCE_MASK		GENMASK(5, 4)
+
+#define LS_FS_OUTPUT_IMPEDANCE_MASK		GENMASK(3, 0)
+
+static const char * const qcom_snps_hsphy_vreg_names[] = {
+	"vdda-pll", "vdda33", "vdda18",
+};
+
+#define SNPS_HS_NUM_VREGS		ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
+
+struct override_param {
+	s32	value;
+	u8	reg_val;
+};
+
+struct override_param_map {
+	const char *prop_name;
+	const struct override_param *param_table;
+	u8 table_size;
+	u8 reg_offset;
+	u8 param_mask;
+};
+
+struct phy_override_seq {
+	bool	need_update;
+	u8	offset;
+	u8	value;
+	u8	mask;
+};
+
+#define NUM_HSPHY_TUNING_PARAMS	(9)
+
+/**
+ * struct qcom_snps_hsphy - snps hs phy attributes
+ *
+ * @dev: device structure
+ *
+ * @phy: generic phy
+ * @base: iomapped memory space for snps hs phy
+ *
+ * @num_clks: number of clocks
+ * @clks: array of clocks
+ * @phy_reset: phy reset control
+ * @vregs: regulator supplies bulk data
+ * @phy_initialized: if PHY has been initialized correctly
+ * @mode: contains the current mode the PHY is in
+ * @update_seq_cfg: tuning parameters for phy init
+ */
+struct qcom_snps_hsphy {
+	struct device *dev;
+
+	struct phy *phy;
+	void __iomem *base;
+
+	int num_clks;
+	struct clk_bulk_data *clks;
+	struct reset_control *phy_reset;
+	struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
+
+	bool phy_initialized;
+	enum phy_mode mode;
+	struct phy_override_seq update_seq_cfg[NUM_HSPHY_TUNING_PARAMS];
+};
+
+static int qcom_snps_hsphy_clk_init(struct qcom_snps_hsphy *hsphy)
+{
+	struct device *dev = hsphy->dev;
+
+	hsphy->num_clks = 2;
+	hsphy->clks = devm_kcalloc(dev, hsphy->num_clks, sizeof(*hsphy->clks), GFP_KERNEL);
+	if (!hsphy->clks)
+		return -ENOMEM;
+
+	/*
+	 * TODO: Currently no device tree instantiation of the PHY is using the clock.
+	 * This needs to be fixed in order for this code to be able to use devm_clk_bulk_get().
+	 */
+	hsphy->clks[0].id = "cfg_ahb";
+	hsphy->clks[0].clk = devm_clk_get_optional(dev, "cfg_ahb");
+	if (IS_ERR(hsphy->clks[0].clk))
+		return dev_err_probe(dev, PTR_ERR(hsphy->clks[0].clk),
+				     "failed to get cfg_ahb clk\n");
+
+	hsphy->clks[1].id = "ref";
+	hsphy->clks[1].clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(hsphy->clks[1].clk))
+		return dev_err_probe(dev, PTR_ERR(hsphy->clks[1].clk),
+				     "failed to get ref clk\n");
+
+	return 0;
+}
+
+static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
+						u32 mask, u32 val)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~mask;
+	reg |= val & mask;
+	writel_relaxed(reg, base + offset);
+
+	/* Ensure above write is completed */
+	readl_relaxed(base + offset);
+}
+
+static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
+{
+	dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n");
+
+	if (hsphy->mode == PHY_MODE_USB_HOST) {
+		/* Enable auto-resume to meet remote wakeup timing */
+		qcom_snps_hsphy_write_mask(hsphy->base,
+					   USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+					   USB2_AUTO_RESUME,
+					   USB2_AUTO_RESUME);
+		usleep_range(500, 1000);
+		qcom_snps_hsphy_write_mask(hsphy->base,
+					   USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+					   0, USB2_AUTO_RESUME);
+	}
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
+{
+	dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
+
+	return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
+{
+	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+	if (!hsphy->phy_initialized)
+		return 0;
+
+	return qcom_snps_hsphy_suspend(hsphy);
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
+{
+	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+	if (!hsphy->phy_initialized)
+		return 0;
+
+	return qcom_snps_hsphy_resume(hsphy);
+}
+
+static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
+				    int submode)
+{
+	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+
+	hsphy->mode = mode;
+	return 0;
+}
+
+static const struct override_param hs_disconnect_sc7280[] = {
+	{ -272, 0 },
+	{ 0, 1 },
+	{ 317, 2 },
+	{ 630, 3 },
+	{ 973, 4 },
+	{ 1332, 5 },
+	{ 1743, 6 },
+	{ 2156, 7 },
+};
+
+static const struct override_param squelch_det_threshold_sc7280[] = {
+	{ -2090, 7 },
+	{ -1560, 6 },
+	{ -1030, 5 },
+	{ -530, 4 },
+	{ 0, 3 },
+	{ 530, 2 },
+	{ 1060, 1 },
+	{ 1590, 0 },
+};
+
+static const struct override_param hs_amplitude_sc7280[] = {
+	{ -660, 0 },
+	{ -440, 1 },
+	{ -220, 2 },
+	{ 0, 3 },
+	{ 230, 4 },
+	{ 440, 5 },
+	{ 650, 6 },
+	{ 890, 7 },
+	{ 1110, 8 },
+	{ 1330, 9 },
+	{ 1560, 10 },
+	{ 1780, 11 },
+	{ 2000, 12 },
+	{ 2220, 13 },
+	{ 2430, 14 },
+	{ 2670, 15 },
+};
+
+static const struct override_param preemphasis_duration_sc7280[] = {
+	{ 10000, 1 },
+	{ 20000, 0 },
+};
+
+static const struct override_param preemphasis_amplitude_sc7280[] = {
+	{ 10000, 1 },
+	{ 20000, 2 },
+	{ 30000, 3 },
+	{ 40000, 0 },
+};
+
+static const struct override_param hs_rise_fall_time_sc7280[] = {
+	{ -4100, 3 },
+	{ 0, 2 },
+	{ 2810, 1 },
+	{ 5430, 0 },
+};
+
+static const struct override_param hs_crossover_voltage_sc7280[] = {
+	{ -31000, 1 },
+	{ 0, 3 },
+	{ 28000, 2 },
+};
+
+static const struct override_param hs_output_impedance_sc7280[] = {
+	{ -2300000, 3 },
+	{ 0, 2 },
+	{ 2600000, 1 },
+	{ 6100000, 0 },
+};
+
+static const struct override_param ls_fs_output_impedance_sc7280[] = {
+	{ -1053, 15 },
+	{ -557, 7 },
+	{ 0, 3 },
+	{ 612, 1 },
+	{ 1310, 0 },
+};
+
+static const struct override_param_map sc7280_snps_7nm_phy[] = {
+	{
+		"qcom,hs-disconnect-bp",
+		hs_disconnect_sc7280,
+		ARRAY_SIZE(hs_disconnect_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
+		HS_DISCONNECT_MASK
+	},
+	{
+		"qcom,squelch-detector-bp",
+		squelch_det_threshold_sc7280,
+		ARRAY_SIZE(squelch_det_threshold_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
+		SQUELCH_DETECTOR_MASK
+	},
+	{
+		"qcom,hs-amplitude-bp",
+		hs_amplitude_sc7280,
+		ARRAY_SIZE(hs_amplitude_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+		HS_AMPLITUDE_MASK
+	},
+	{
+		"qcom,pre-emphasis-duration-bp",
+		preemphasis_duration_sc7280,
+		ARRAY_SIZE(preemphasis_duration_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+		PREEMPHASIS_DURATION_MASK,
+	},
+	{
+		"qcom,pre-emphasis-amplitude-bp",
+		preemphasis_amplitude_sc7280,
+		ARRAY_SIZE(preemphasis_amplitude_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+		PREEMPHASIS_AMPLITUDE_MASK,
+	},
+	{
+		"qcom,hs-rise-fall-time-bp",
+		hs_rise_fall_time_sc7280,
+		ARRAY_SIZE(hs_rise_fall_time_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
+		HS_RISE_FALL_MASK
+	},
+	{
+		"qcom,hs-crossover-voltage-microvolt",
+		hs_crossover_voltage_sc7280,
+		ARRAY_SIZE(hs_crossover_voltage_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
+		HS_CROSSOVER_VOLTAGE_MASK
+	},
+	{
+		"qcom,hs-output-impedance-micro-ohms",
+		hs_output_impedance_sc7280,
+		ARRAY_SIZE(hs_output_impedance_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
+		HS_OUTPUT_IMPEDANCE_MASK,
+	},
+	{
+		"qcom,ls-fs-output-impedance-bp",
+		ls_fs_output_impedance_sc7280,
+		ARRAY_SIZE(ls_fs_output_impedance_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3,
+		LS_FS_OUTPUT_IMPEDANCE_MASK,
+	},
+	{},
+};
+
+static int qcom_snps_hsphy_init(struct phy *phy)
+{
+	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+	int ret, i;
+
+	dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(hsphy->num_clks, hsphy->clks);
+	if (ret) {
+		dev_err(&phy->dev, "failed to enable clocks, %d\n", ret);
+		goto poweroff_phy;
+	}
+
+	ret = reset_control_assert(hsphy->phy_reset);
+	if (ret) {
+		dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
+		goto disable_clks;
+	}
+
+	usleep_range(100, 150);
+
+	ret = reset_control_deassert(hsphy->phy_reset);
+	if (ret) {
+		dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
+		goto disable_clks;
+	}
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
+					UTMI_PHY_CMN_CTRL_OVERRIDE_EN,
+					UTMI_PHY_CMN_CTRL_OVERRIDE_EN);
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
+							POR, POR);
+	qcom_snps_hsphy_write_mask(hsphy->base,
+					USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,
+					FSEL_MASK, 0);
+	qcom_snps_hsphy_write_mask(hsphy->base,
+					USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
+					PLLBTUNE, PLLBTUNE);
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL,
+					REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK);
+	qcom_snps_hsphy_write_mask(hsphy->base,
+					USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
+					VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
+					VBUSVLDEXT0, VBUSVLDEXT0);
+
+	for (i = 0; i < ARRAY_SIZE(hsphy->update_seq_cfg); i++) {
+		if (hsphy->update_seq_cfg[i].need_update)
+			qcom_snps_hsphy_write_mask(hsphy->base,
+					hsphy->update_seq_cfg[i].offset,
+					hsphy->update_seq_cfg[i].mask,
+					hsphy->update_seq_cfg[i].value);
+	}
+
+	qcom_snps_hsphy_write_mask(hsphy->base,
+					USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
+					VREGBYPASS, VREGBYPASS);
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+					USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
+					USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0,
+					SLEEPM, SLEEPM);
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,
+				   SIDDQ, 0);
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
+					POR, 0);
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+					USB2_SUSPEND_N_SEL, 0);
+
+	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
+					UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
+
+	hsphy->phy_initialized = true;
+
+	return 0;
+
+disable_clks:
+	clk_bulk_disable_unprepare(hsphy->num_clks, hsphy->clks);
+poweroff_phy:
+	regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
+
+	return ret;
+}
+
+static int qcom_snps_hsphy_exit(struct phy *phy)
+{
+	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+
+	reset_control_assert(hsphy->phy_reset);
+	clk_bulk_disable_unprepare(hsphy->num_clks, hsphy->clks);
+	regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
+	hsphy->phy_initialized = false;
+
+	return 0;
+}
+
+static const struct phy_ops qcom_snps_hsphy_gen_ops = {
+	.init		= qcom_snps_hsphy_init,
+	.exit		= qcom_snps_hsphy_exit,
+	.set_mode	= qcom_snps_hsphy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
+	{ .compatible	= "qcom,sm8150-usb-hs-phy", },
+	{ .compatible	= "qcom,usb-snps-hs-5nm-phy", },
+	{
+		.compatible	= "qcom,usb-snps-hs-7nm-phy",
+		.data		= &sc7280_snps_7nm_phy,
+	},
+	{ .compatible	= "qcom,usb-snps-femto-v2-phy",	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
+
+static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
+	SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
+			   qcom_snps_hsphy_runtime_resume, NULL)
+};
+
+static void qcom_snps_hsphy_override_param_update_val(
+			const struct override_param_map map,
+			s32 dt_val, struct phy_override_seq *seq_entry)
+{
+	int i;
+
+	/*
+	 * Param table for each param is in increasing order
+	 * of dt values. We need to iterate over the list to
+	 * select the entry that matches the dt value and pick
+	 * up the corresponding register value.
+	 */
+	for (i = 0; i < map.table_size - 1; i++) {
+		if (map.param_table[i].value == dt_val)
+			break;
+	}
+
+	seq_entry->need_update = true;
+	seq_entry->offset = map.reg_offset;
+	seq_entry->mask = map.param_mask;
+	seq_entry->value = map.param_table[i].reg_val << __ffs(map.param_mask);
+}
+
+static void qcom_snps_hsphy_read_override_param_seq(struct device *dev)
+{
+	struct device_node *node = dev->of_node;
+	s32 val;
+	int ret, i;
+	struct qcom_snps_hsphy *hsphy;
+	const struct override_param_map *cfg = of_device_get_match_data(dev);
+
+	if (!cfg)
+		return;
+
+	hsphy = dev_get_drvdata(dev);
+
+	for (i = 0; cfg[i].prop_name != NULL; i++) {
+		ret = of_property_read_s32(node, cfg[i].prop_name, &val);
+		if (ret)
+			continue;
+
+		qcom_snps_hsphy_override_param_update_val(cfg[i], val,
+					&hsphy->update_seq_cfg[i]);
+		dev_dbg(&hsphy->phy->dev, "Read param: %s dt_val: %d reg_val: 0x%x\n",
+			cfg[i].prop_name, val, hsphy->update_seq_cfg[i].value);
+
+	}
+}
+
+static int qcom_snps_hsphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_snps_hsphy *hsphy;
+	struct phy_provider *phy_provider;
+	struct phy *generic_phy;
+	int ret, i;
+	int num;
+
+	hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL);
+	if (!hsphy)
+		return -ENOMEM;
+
+	hsphy->dev = dev;
+
+	hsphy->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hsphy->base))
+		return PTR_ERR(hsphy->base);
+
+	ret = qcom_snps_hsphy_clk_init(hsphy);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to initialize clocks\n");
+
+	hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(hsphy->phy_reset)) {
+		dev_err(dev, "failed to get phy core reset\n");
+		return PTR_ERR(hsphy->phy_reset);
+	}
+
+	num = ARRAY_SIZE(hsphy->vregs);
+	for (i = 0; i < num; i++)
+		hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i];
+
+	ret = devm_regulator_bulk_get(dev, num, hsphy->vregs);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to get regulator supplies\n");
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
+	generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
+	if (IS_ERR(generic_phy)) {
+		ret = PTR_ERR(generic_phy);
+		dev_err(dev, "failed to create phy, %d\n", ret);
+		return ret;
+	}
+	hsphy->phy = generic_phy;
+
+	dev_set_drvdata(dev, hsphy);
+	phy_set_drvdata(generic_phy, hsphy);
+	qcom_snps_hsphy_read_override_param_seq(dev);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (!IS_ERR(phy_provider))
+		dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
+	else
+		pm_runtime_disable(dev);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver qcom_snps_hsphy_driver = {
+	.probe		= qcom_snps_hsphy_probe,
+	.driver = {
+		.name	= "qcom-snps-hs-femto-v2-phy",
+		.pm = &qcom_snps_hsphy_pm_ops,
+		.of_match_table = qcom_snps_hsphy_of_match_table,
+	},
+};
+
+module_platform_driver(qcom_snps_hsphy_driver);
+
+MODULE_DESCRIPTION("Qualcomm SNPS FEMTO USB HS PHY V2 driver");
+MODULE_LICENSE("GPL v2");