diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/pinctrl/Kconfig | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | drivers/pinctrl/Kconfig | 544 |
1 files changed, 544 insertions, 0 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig new file mode 100644 index 000000000..f71fefff4 --- /dev/null +++ b/drivers/pinctrl/Kconfig @@ -0,0 +1,544 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# PINCTRL infrastructure and drivers +# + +menuconfig PINCTRL + bool "Pin controllers" + +if PINCTRL + +config GENERIC_PINCTRL_GROUPS + bool + +config PINMUX + bool "Support pin multiplexing controllers" if COMPILE_TEST + +config GENERIC_PINMUX_FUNCTIONS + bool + select PINMUX + +config PINCONF + bool "Support pin configuration controllers" if COMPILE_TEST + +config GENERIC_PINCONF + bool + select PINCONF + +config DEBUG_PINCTRL + bool "Debug PINCTRL calls" + depends on DEBUG_KERNEL + help + Say Y here to add some extra checks and diagnostics to PINCTRL calls. + +config PINCTRL_AMD + bool "AMD GPIO pin control" + depends on HAS_IOMEM + depends on ACPI || COMPILE_TEST + select GPIOLIB + select GPIOLIB_IRQCHIP + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + The driver for memory mapped GPIO functionality on AMD platforms + (x86 or arm). Most of the pins are usually muxed to some other + functionality by firmware, so only a small amount is available + for GPIO use. + + Requires ACPI/FDT device enumeration code to set up a platform + device. + +config PINCTRL_APPLE_GPIO + tristate "Apple SoC GPIO pin controller driver" + depends on ARCH_APPLE + select PINMUX + select GPIOLIB + select GPIOLIB_IRQCHIP + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select OF_GPIO + help + This is the driver for the GPIO controller found on Apple ARM SoCs, + including M1. + + This driver can also be built as a module. If so, the module + will be called pinctrl-apple-gpio. + +config PINCTRL_ARTPEC6 + bool "Axis ARTPEC-6 pin controller driver" + depends on MACH_ARTPEC6 + select PINMUX + select GENERIC_PINCONF + help + This is the driver for the Axis ARTPEC-6 pin controller. This driver + supports pin function multiplexing as well as pin bias and drive + strength configuration. Device tree integration instructions can be + found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt + +config PINCTRL_AS3722 + tristate "Pinctrl and GPIO driver for ams AS3722 PMIC" + depends on MFD_AS3722 && GPIOLIB + select PINMUX + select GENERIC_PINCONF + help + AS3722 device supports the configuration of GPIO pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the GPIO pins of AS3722 devices. It also + supports the GPIO functionality through gpiolib. + +config PINCTRL_AT91 + bool "AT91 pinctrl driver" + depends on OF + depends on ARCH_AT91 + select PINMUX + select PINCONF + select GPIOLIB + select OF_GPIO + select GPIOLIB_IRQCHIP + help + Say Y here to enable the at91 pinctrl driver + +config PINCTRL_AT91PIO4 + bool "AT91 PIO4 pinctrl driver" + depends on OF + depends on HAS_IOMEM + depends on ARCH_AT91 || COMPILE_TEST + select PINMUX + select GENERIC_PINCONF + select GPIOLIB + select GPIOLIB_IRQCHIP + select OF_GPIO + help + Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4 + controller available on sama5d2 SoC. + +config PINCTRL_AXP209 + tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support" + depends on MFD_AXP20X + depends on OF + select PINMUX + select GENERIC_PINCONF + select GPIOLIB + help + AXP PMICs provides multiple GPIOs that can be muxed for different + functions. This driver bundles a pinctrl driver to select the function + muxing and a GPIO driver to handle the GPIO when the GPIO function is + selected. + Say Y to enable pinctrl and GPIO support for the AXP209 PMIC. + +config PINCTRL_BM1880 + bool "Bitmain BM1880 Pinctrl driver" + depends on OF && (ARCH_BITMAIN || COMPILE_TEST) + default ARCH_BITMAIN + select PINMUX + help + Pinctrl driver for Bitmain BM1880 SoC. + +config PINCTRL_CY8C95X0 + tristate "Cypress CY8C95X0 I2C pinctrl and GPIO driver" + depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP + select PINMUX + select PINCONF + select GENERIC_PINCONF + select REGMAP_I2C + help + Support for 20/40/60 pin Cypress Cy8C95x0 pinctrl/gpio I2C expander. + This driver can also be built as a module. If so, the module will be + called pinctrl-cy8c95x0. + +config PINCTRL_DA850_PUPD + tristate "TI DA850/OMAP-L138/AM18XX pull-up and pull-down groups" + depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST) + select PINCONF + select GENERIC_PINCONF + help + Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control + pull-up and pull-down pin groups. + +config PINCTRL_DA9062 + tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support" + depends on MFD_DA9062 + select GPIOLIB + help + The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for + different functions. This driver bundles a pinctrl driver to select the + function muxing and a GPIO driver to handle the GPIO when the GPIO + function is selected. + + Say Y to enable pinctrl and GPIO support for the DA9062 PMIC. + +config PINCTRL_DIGICOLOR + bool + depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST) + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_EQUILIBRIUM + tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC" + depends on OF && HAS_IOMEM + depends on X86 || COMPILE_TEST + select PINMUX + select PINCONF + select GPIOLIB + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + help + Equilibrium driver is a pinctrl and GPIO driver for Intel Lightning + Mountain network processor SoC that supports both the GPIO and pin + control frameworks. It provides interfaces to setup pin muxing, assign + desired pin functions, configure GPIO attributes for LGM SoC pins. + Pin muxing and pin config settings are retrieved from device tree. + +config PINCTRL_GEMINI + bool + depends on ARCH_GEMINI + default ARCH_GEMINI + select PINMUX + select GENERIC_PINCONF + select MFD_SYSCON + +config PINCTRL_INGENIC + bool "Pinctrl driver for the Ingenic JZ47xx SoCs" + default MACH_INGENIC + depends on OF + depends on MIPS || COMPILE_TEST + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIOLIB_IRQCHIP + select REGMAP_MMIO + +config PINCTRL_K210 + bool "Pinctrl driver for the Canaan Kendryte K210 SoC" + depends on RISCV && SOC_CANAAN && OF + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select REGMAP_MMIO + default SOC_CANAAN + help + Add support for the Canaan Kendryte K210 RISC-V SOC Field + Programmable IO Array (FPIOA) controller. + +config PINCTRL_KEEMBAY + tristate "Pinctrl driver for Intel Keem Bay SoC" + depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) + depends on HAS_IOMEM + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIOLIB_IRQCHIP + select GPIO_GENERIC + help + This selects pin control driver for the Intel Keem Bay SoC. + It provides pin config functions such as pull-up, pull-down, + interrupt, drive strength, sec lock, Schmitt trigger, slew + rate control and direction control. This module will be + called as pinctrl-keembay. + +config PINCTRL_LANTIQ + bool + depends on LANTIQ + select PINMUX + select PINCONF + +config PINCTRL_FALCON + bool + depends on SOC_FALCON + depends on PINCTRL_LANTIQ + +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + +config PINCTRL_LPC18XX + bool "NXP LPC18XX/43XX SCU pinctrl driver" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + default ARCH_LPC18XX + select PINMUX + select GENERIC_PINCONF + help + Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU). + +config PINCTRL_MAX77620 + tristate "MAX77620/MAX20024 Pincontrol support" + depends on MFD_MAX77620 && OF + select PINMUX + select GENERIC_PINCONF + help + Say Y here to enable Pin control support for Maxim MAX77620 PMIC. + This PMIC has 8 GPIO pins that work as GPIO as well as special + function in alternate mode. This driver also configure push-pull, + open drain, FPS slots etc. + +config PINCTRL_MCP23S08_I2C + tristate + select REGMAP_I2C + +config PINCTRL_MCP23S08_SPI + tristate + select REGMAP_SPI + +config PINCTRL_MCP23S08 + tristate "Microchip MCP23xxx I/O expander" + depends on SPI_MASTER || I2C + select GPIOLIB + select GPIOLIB_IRQCHIP + select GENERIC_PINCONF + select PINCTRL_MCP23S08_I2C if I2C + select PINCTRL_MCP23S08_SPI if SPI_MASTER + help + SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 / + MCP23008 / MCP23017 / MCP23018 I/O expanders. + This provides a GPIO interface supporting inputs and outputs and a + corresponding interrupt-controller. + +config PINCTRL_MICROCHIP_SGPIO + tristate "Pinctrl driver for Microsemi/Microchip Serial GPIO" + depends on OF + depends on HAS_IOMEM + select GPIOLIB + select GPIOLIB_IRQCHIP + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select OF_GPIO + help + Support for the serial GPIO interface used on Microsemi and + Microchip SoCs. By using a serial interface, the SIO + controller significantly extends the number of available + GPIOs with a minimum number of additional pins on the + device. The primary purpose of the SIO controller is to + connect control signals from SFP modules and to act as an + LED controller. + + If compiled as a module, the module name will be + pinctrl-microchip-sgpio. + +config PINCTRL_OCELOT + tristate "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs" + depends on OF + depends on HAS_IOMEM + select GPIOLIB + select GPIOLIB_IRQCHIP + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select OF_GPIO + select REGMAP_MMIO + help + Support for the internal GPIO interfaces on Microsemi Ocelot and + Jaguar2 SoCs. + + If conpiled as a module, the module name will be pinctrl-ocelot. + +config PINCTRL_OXNAS + bool + depends on OF + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select GPIOLIB_IRQCHIP + select MFD_SYSCON + +config PINCTRL_PALMAS + tristate "Pinctrl driver for the PALMAS Series MFD devices" + depends on OF && MFD_PALMAS + select PINMUX + select GENERIC_PINCONF + help + Palmas device supports the configuration of pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the Palmas series devices like + TPS65913, TPS80036 etc. + +config PINCTRL_PIC32 + bool "Microchip PIC32 pin controller driver" + depends on OF + depends on MACH_PIC32 + select PINMUX + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + select OF_GPIO + help + This is the pin controller and gpio driver for Microchip PIC32 + microcontrollers. This option is selected automatically when specific + machine and arch are selected to build. + +config PINCTRL_PIC32MZDA + def_bool y if PIC32MZDA + select PINCTRL_PIC32 + +config PINCTRL_PISTACHIO + bool "IMG Pistachio SoC pinctrl driver" + depends on OF && (MIPS || COMPILE_TEST) + depends on GPIOLIB + select PINMUX + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + select OF_GPIO + help + This support pinctrl and GPIO driver for IMG Pistachio SoC. + +config PINCTRL_RK805 + tristate "Pinctrl and GPIO driver for RK805 PMIC" + depends on MFD_RK808 + select GPIOLIB + select PINMUX + select GENERIC_PINCONF + help + This selects the pinctrl driver for RK805. + +config PINCTRL_ROCKCHIP + tristate "Rockchip gpio and pinctrl driver" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on OF + select GPIOLIB + select PINMUX + select GENERIC_PINCONF + select GENERIC_IRQ_CHIP + select MFD_SYSCON + select OF_GPIO + default ARCH_ROCKCHIP + help + This support pinctrl and GPIO driver for Rockchip SoCs. + +config PINCTRL_SINGLE + tristate "One-register-per-pin type device tree based pinctrl driver" + depends on OF + depends on HAS_IOMEM + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + help + This selects the device tree based generic pinctrl driver. + +config PINCTRL_ST + bool + depends on OF + select PINMUX + select PINCONF + select GPIOLIB_IRQCHIP + +config PINCTRL_STMFX + tristate "STMicroelectronics STMFX GPIO expander pinctrl driver" + depends on I2C + depends on OF_GPIO + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + select MFD_STMFX + help + Driver for STMicroelectronics Multi-Function eXpander (STMFX) + GPIO expander. + This provides a GPIO interface supporting inputs and outputs, + and configuring push-pull, open-drain, and can also be used as + interrupt-controller. + +config PINCTRL_SX150X + bool "Semtech SX150x I2C GPIO expander pinctrl driver" + depends on I2C=y + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select GPIOLIB_IRQCHIP + select REGMAP + help + Say Y here to provide support for Semtech SX150x-series I2C + GPIO expanders as pinctrl module. + Compatible models include: + - 8 bits: sx1508q, sx1502q + - 16 bits: sx1509q, sx1506q + +config PINCTRL_TB10X + bool + depends on OF && ARC_PLAT_TB10X + select GPIOLIB + +config PINCTRL_THUNDERBAY + tristate "Generic pinctrl and GPIO driver for Intel Thunder Bay SoC" + depends on ARCH_THUNDERBAY || (ARM64 && COMPILE_TEST) + depends on HAS_IOMEM + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIOLIB_IRQCHIP + select GPIO_GENERIC + help + This selects pin control driver for the Intel Thunder Bay SoC. + It provides pin config functions such as pull-up, pull-down, + interrupt, drive strength, sec lock, Schmitt trigger, slew + rate control and direction control. This module will be + called as pinctrl-thunderbay. + +config PINCTRL_ZYNQ + bool "Pinctrl driver for Xilinx Zynq" + depends on ARCH_ZYNQ + select PINMUX + select GENERIC_PINCONF + help + This selects the pinctrl driver for Xilinx Zynq. + +config PINCTRL_ZYNQMP + tristate "Pinctrl driver for Xilinx ZynqMP" + depends on ZYNQMP_FIRMWARE + select PINMUX + select GENERIC_PINCONF + default ZYNQMP_FIRMWARE + help + This selects the pinctrl driver for Xilinx ZynqMP platform. + This driver will query the pin information from the firmware + and allow configuring the pins. + Configuration can include the mux function to select on those + pin(s)/group(s), and various pin configuration parameters + such as pull-up, slew rate, etc. + This driver can also be built as a module. If so, the module + will be called pinctrl-zynqmp. + +source "drivers/pinctrl/actions/Kconfig" +source "drivers/pinctrl/aspeed/Kconfig" +source "drivers/pinctrl/bcm/Kconfig" +source "drivers/pinctrl/berlin/Kconfig" +source "drivers/pinctrl/cirrus/Kconfig" +source "drivers/pinctrl/freescale/Kconfig" +source "drivers/pinctrl/intel/Kconfig" +source "drivers/pinctrl/mediatek/Kconfig" +source "drivers/pinctrl/meson/Kconfig" +source "drivers/pinctrl/mvebu/Kconfig" +source "drivers/pinctrl/nomadik/Kconfig" +source "drivers/pinctrl/nuvoton/Kconfig" +source "drivers/pinctrl/pxa/Kconfig" +source "drivers/pinctrl/qcom/Kconfig" +source "drivers/pinctrl/ralink/Kconfig" +source "drivers/pinctrl/renesas/Kconfig" +source "drivers/pinctrl/samsung/Kconfig" +source "drivers/pinctrl/spear/Kconfig" +source "drivers/pinctrl/sprd/Kconfig" +source "drivers/pinctrl/starfive/Kconfig" +source "drivers/pinctrl/stm32/Kconfig" +source "drivers/pinctrl/sunplus/Kconfig" +source "drivers/pinctrl/sunxi/Kconfig" +source "drivers/pinctrl/tegra/Kconfig" +source "drivers/pinctrl/ti/Kconfig" +source "drivers/pinctrl/uniphier/Kconfig" +source "drivers/pinctrl/visconti/Kconfig" +source "drivers/pinctrl/vt8500/Kconfig" + +endif |