Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c
new file mode 100644
index 000000000..3de024e3c
--- /dev/null
+++ b/drivers/power/reset/brcm-kona-reset.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Broadcom
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET	0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET	4
+
+#define RSTMGR_WR_PASSWORD		0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT	8
+#define RSTMGR_WR_ACCESS_ENABLE		1
+
+static void __iomem *kona_reset_base;
+
+static int kona_reset_handler(struct notifier_block *this,
+				unsigned long mode, void *cmd)
+{
+	/*
+	 * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+	 * register. To write to that register we must first write the password
+	 * and the enable bit in the write access enable register.
+	 */
+	writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+		RSTMGR_WR_ACCESS_ENABLE,
+		kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET);
+	writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block kona_reset_nb = {
+	.notifier_call = kona_reset_handler,
+	.priority = 128,
+};
+
+static int kona_reset_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	kona_reset_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kona_reset_base))
+		return PTR_ERR(kona_reset_base);
+
+	return register_restart_handler(&kona_reset_nb);
+}
+
+static const struct of_device_id of_match[] = {
+	{ .compatible = "brcm,bcm21664-resetmgr" },
+	{},
+};
+
+static struct platform_driver bcm_kona_reset_driver = {
+	.probe = kona_reset_probe,
+	.driver = {
+		.name = "brcm-kona-reset",
+		.of_match_table = of_match,
+	},
+};
+
+builtin_platform_driver(bcm_kona_reset_driver);