Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3263 insertions, 0 deletions

diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
new file mode 100644
index 000000000..71ce28eed
--- /dev/null
+++ b/drivers/power/supply/ab8500_fg.c
@@ -0,0 +1,3263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson AB 2012
+ *
+ * Main and Back-up battery management driver.
+ *
+ * Note: Backup battery management is required in case of Li-Ion battery and not
+ * for capacitive battery. HREF boards have capacitive battery and hence backup
+ * battery management is not used and the supported code is available in this
+ * driver.
+ *
+ * Author:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/component.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/time64.h>
+#include <linux/of.h>
+#include <linux/completion.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/iio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/fixp-arith.h>
+
+#include "ab8500-bm.h"
+
+#define FG_LSB_IN_MA			1627
+#define QLSB_NANO_AMP_HOURS_X10		1071
+#define INS_CURR_TIMEOUT		(3 * HZ)
+
+#define SEC_TO_SAMPLE(S)		(S * 4)
+
+#define NBR_AVG_SAMPLES			20
+#define WAIT_FOR_INST_CURRENT_MAX	70
+/* Currents higher than -500mA (dissipating) will make compensation unstable */
+#define IGNORE_VBAT_HIGHCUR		-500000
+
+#define LOW_BAT_CHECK_INTERVAL		(HZ / 16) /* 62.5 ms */
+
+#define VALID_CAPACITY_SEC		(45 * 60) /* 45 minutes */
+#define BATT_OK_MIN			2360 /* mV */
+#define BATT_OK_INCREMENT		50 /* mV */
+#define BATT_OK_MAX_NR_INCREMENTS	0xE
+
+/* FG constants */
+#define BATT_OVV			0x01
+
+/**
+ * struct ab8500_fg_interrupts - ab8500 fg interrupts
+ * @name:	name of the interrupt
+ * @isr		function pointer to the isr
+ */
+struct ab8500_fg_interrupts {
+	char *name;
+	irqreturn_t (*isr)(int irq, void *data);
+};
+
+enum ab8500_fg_discharge_state {
+	AB8500_FG_DISCHARGE_INIT,
+	AB8500_FG_DISCHARGE_INITMEASURING,
+	AB8500_FG_DISCHARGE_INIT_RECOVERY,
+	AB8500_FG_DISCHARGE_RECOVERY,
+	AB8500_FG_DISCHARGE_READOUT_INIT,
+	AB8500_FG_DISCHARGE_READOUT,
+	AB8500_FG_DISCHARGE_WAKEUP,
+};
+
+static char *discharge_state[] = {
+	"DISCHARGE_INIT",
+	"DISCHARGE_INITMEASURING",
+	"DISCHARGE_INIT_RECOVERY",
+	"DISCHARGE_RECOVERY",
+	"DISCHARGE_READOUT_INIT",
+	"DISCHARGE_READOUT",
+	"DISCHARGE_WAKEUP",
+};
+
+enum ab8500_fg_charge_state {
+	AB8500_FG_CHARGE_INIT,
+	AB8500_FG_CHARGE_READOUT,
+};
+
+static char *charge_state[] = {
+	"CHARGE_INIT",
+	"CHARGE_READOUT",
+};
+
+enum ab8500_fg_calibration_state {
+	AB8500_FG_CALIB_INIT,
+	AB8500_FG_CALIB_WAIT,
+	AB8500_FG_CALIB_END,
+};
+
+struct ab8500_fg_avg_cap {
+	int avg;
+	int samples[NBR_AVG_SAMPLES];
+	time64_t time_stamps[NBR_AVG_SAMPLES];
+	int pos;
+	int nbr_samples;
+	int sum;
+};
+
+struct ab8500_fg_cap_scaling {
+	bool enable;
+	int cap_to_scale[2];
+	int disable_cap_level;
+	int scaled_cap;
+};
+
+struct ab8500_fg_battery_capacity {
+	int max_mah_design;
+	int max_mah;
+	int mah;
+	int permille;
+	int level;
+	int prev_mah;
+	int prev_percent;
+	int prev_level;
+	int user_mah;
+	struct ab8500_fg_cap_scaling cap_scale;
+};
+
+struct ab8500_fg_flags {
+	bool fg_enabled;
+	bool conv_done;
+	bool charging;
+	bool fully_charged;
+	bool force_full;
+	bool low_bat_delay;
+	bool low_bat;
+	bool bat_ovv;
+	bool batt_unknown;
+	bool calibrate;
+	bool user_cap;
+	bool batt_id_received;
+};
+
+struct inst_curr_result_list {
+	struct list_head list;
+	int *result;
+};
+
+/**
+ * struct ab8500_fg - ab8500 FG device information
+ * @dev:		Pointer to the structure device
+ * @node:		a list of AB8500 FGs, hence prepared for reentrance
+ * @irq			holds the CCEOC interrupt number
+ * @vbat_uv:		Battery voltage in uV
+ * @vbat_nom_uv:	Nominal battery voltage in uV
+ * @inst_curr_ua:	Instantenous battery current in uA
+ * @avg_curr_ua:	Average battery current in uA
+ * @bat_temp		battery temperature
+ * @fg_samples:		Number of samples used in the FG accumulation
+ * @accu_charge:	Accumulated charge from the last conversion
+ * @recovery_cnt:	Counter for recovery mode
+ * @high_curr_cnt:	Counter for high current mode
+ * @init_cnt:		Counter for init mode
+ * @low_bat_cnt		Counter for number of consecutive low battery measures
+ * @nbr_cceoc_irq_cnt	Counter for number of CCEOC irqs received since enabled
+ * @recovery_needed:	Indicate if recovery is needed
+ * @high_curr_mode:	Indicate if we're in high current mode
+ * @init_capacity:	Indicate if initial capacity measuring should be done
+ * @turn_off_fg:	True if fg was off before current measurement
+ * @calib_state		State during offset calibration
+ * @discharge_state:	Current discharge state
+ * @charge_state:	Current charge state
+ * @ab8500_fg_started	Completion struct used for the instant current start
+ * @ab8500_fg_complete	Completion struct used for the instant current reading
+ * @flags:		Structure for information about events triggered
+ * @bat_cap:		Structure for battery capacity specific parameters
+ * @avg_cap:		Average capacity filter
+ * @parent:		Pointer to the struct ab8500
+ * @main_bat_v:		ADC channel for the main battery voltage
+ * @bm:           	Platform specific battery management information
+ * @fg_psy:		Structure that holds the FG specific battery properties
+ * @fg_wq:		Work queue for running the FG algorithm
+ * @fg_periodic_work:	Work to run the FG algorithm periodically
+ * @fg_low_bat_work:	Work to check low bat condition
+ * @fg_reinit_work	Work used to reset and reinitialise the FG algorithm
+ * @fg_work:		Work to run the FG algorithm instantly
+ * @fg_acc_cur_work:	Work to read the FG accumulator
+ * @fg_check_hw_failure_work:	Work for checking HW state
+ * @cc_lock:		Mutex for locking the CC
+ * @fg_kobject:		Structure of type kobject
+ */
+struct ab8500_fg {
+	struct device *dev;
+	struct list_head node;
+	int irq;
+	int vbat_uv;
+	int vbat_nom_uv;
+	int inst_curr_ua;
+	int avg_curr_ua;
+	int bat_temp;
+	int fg_samples;
+	int accu_charge;
+	int recovery_cnt;
+	int high_curr_cnt;
+	int init_cnt;
+	int low_bat_cnt;
+	int nbr_cceoc_irq_cnt;
+	u32 line_impedance_uohm;
+	bool recovery_needed;
+	bool high_curr_mode;
+	bool init_capacity;
+	bool turn_off_fg;
+	enum ab8500_fg_calibration_state calib_state;
+	enum ab8500_fg_discharge_state discharge_state;
+	enum ab8500_fg_charge_state charge_state;
+	struct completion ab8500_fg_started;
+	struct completion ab8500_fg_complete;
+	struct ab8500_fg_flags flags;
+	struct ab8500_fg_battery_capacity bat_cap;
+	struct ab8500_fg_avg_cap avg_cap;
+	struct ab8500 *parent;
+	struct iio_channel *main_bat_v;
+	struct ab8500_bm_data *bm;
+	struct power_supply *fg_psy;
+	struct workqueue_struct *fg_wq;
+	struct delayed_work fg_periodic_work;
+	struct delayed_work fg_low_bat_work;
+	struct delayed_work fg_reinit_work;
+	struct work_struct fg_work;
+	struct work_struct fg_acc_cur_work;
+	struct delayed_work fg_check_hw_failure_work;
+	struct mutex cc_lock;
+	struct kobject fg_kobject;
+};
+static LIST_HEAD(ab8500_fg_list);
+
+/**
+ * ab8500_fg_get() - returns a reference to the primary AB8500 fuel gauge
+ * (i.e. the first fuel gauge in the instance list)
+ */
+struct ab8500_fg *ab8500_fg_get(void)
+{
+	return list_first_entry_or_null(&ab8500_fg_list, struct ab8500_fg,
+					node);
+}
+
+/* Main battery properties */
+static enum power_supply_property ab8500_fg_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+};
+
+/*
+ * This array maps the raw hex value to lowbat voltage used by the AB8500
+ * Values taken from the UM0836, in microvolts.
+ */
+static int ab8500_fg_lowbat_voltage_map[] = {
+	2300000,
+	2325000,
+	2350000,
+	2375000,
+	2400000,
+	2425000,
+	2450000,
+	2475000,
+	2500000,
+	2525000,
+	2550000,
+	2575000,
+	2600000,
+	2625000,
+	2650000,
+	2675000,
+	2700000,
+	2725000,
+	2750000,
+	2775000,
+	2800000,
+	2825000,
+	2850000,
+	2875000,
+	2900000,
+	2925000,
+	2950000,
+	2975000,
+	3000000,
+	3025000,
+	3050000,
+	3075000,
+	3100000,
+	3125000,
+	3150000,
+	3175000,
+	3200000,
+	3225000,
+	3250000,
+	3275000,
+	3300000,
+	3325000,
+	3350000,
+	3375000,
+	3400000,
+	3425000,
+	3450000,
+	3475000,
+	3500000,
+	3525000,
+	3550000,
+	3575000,
+	3600000,
+	3625000,
+	3650000,
+	3675000,
+	3700000,
+	3725000,
+	3750000,
+	3775000,
+	3800000,
+	3825000,
+	3850000,
+	3850000,
+};
+
+static u8 ab8500_volt_to_regval(int voltage_uv)
+{
+	int i;
+
+	if (voltage_uv < ab8500_fg_lowbat_voltage_map[0])
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) {
+		if (voltage_uv < ab8500_fg_lowbat_voltage_map[i])
+			return (u8) i - 1;
+	}
+
+	/* If not captured above, return index of last element */
+	return (u8) ARRAY_SIZE(ab8500_fg_lowbat_voltage_map) - 1;
+}
+
+/**
+ * ab8500_fg_is_low_curr() - Low or high current mode
+ * @di:		pointer to the ab8500_fg structure
+ * @curr_ua:	the current to base or our decision on in microampere
+ *
+ * Low current mode if the current consumption is below a certain threshold
+ */
+static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr_ua)
+{
+	/*
+	 * We want to know if we're in low current mode
+	 */
+	if (curr_ua > -di->bm->fg_params->high_curr_threshold_ua)
+		return true;
+	else
+		return false;
+}
+
+/**
+ * ab8500_fg_add_cap_sample() - Add capacity to average filter
+ * @di:		pointer to the ab8500_fg structure
+ * @sample:	the capacity in mAh to add to the filter
+ *
+ * A capacity is added to the filter and a new mean capacity is calculated and
+ * returned
+ */
+static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
+{
+	time64_t now = ktime_get_boottime_seconds();
+	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+	do {
+		avg->sum += sample - avg->samples[avg->pos];
+		avg->samples[avg->pos] = sample;
+		avg->time_stamps[avg->pos] = now;
+		avg->pos++;
+
+		if (avg->pos == NBR_AVG_SAMPLES)
+			avg->pos = 0;
+
+		if (avg->nbr_samples < NBR_AVG_SAMPLES)
+			avg->nbr_samples++;
+
+		/*
+		 * Check the time stamp for each sample. If too old,
+		 * replace with latest sample
+		 */
+	} while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+
+	avg->avg = avg->sum / avg->nbr_samples;
+
+	return avg->avg;
+}
+
+/**
+ * ab8500_fg_clear_cap_samples() - Clear average filter
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * The capacity filter is reset to zero.
+ */
+static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
+{
+	int i;
+	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+	avg->pos = 0;
+	avg->nbr_samples = 0;
+	avg->sum = 0;
+	avg->avg = 0;
+
+	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
+		avg->samples[i] = 0;
+		avg->time_stamps[i] = 0;
+	}
+}
+
+/**
+ * ab8500_fg_fill_cap_sample() - Fill average filter
+ * @di:		pointer to the ab8500_fg structure
+ * @sample:	the capacity in mAh to fill the filter with
+ *
+ * The capacity filter is filled with a capacity in mAh
+ */
+static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
+{
+	int i;
+	time64_t now;
+	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+	now = ktime_get_boottime_seconds();
+
+	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
+		avg->samples[i] = sample;
+		avg->time_stamps[i] = now;
+	}
+
+	avg->pos = 0;
+	avg->nbr_samples = NBR_AVG_SAMPLES;
+	avg->sum = sample * NBR_AVG_SAMPLES;
+	avg->avg = sample;
+}
+
+/**
+ * ab8500_fg_coulomb_counter() - enable coulomb counter
+ * @di:		pointer to the ab8500_fg structure
+ * @enable:	enable/disable
+ *
+ * Enable/Disable coulomb counter.
+ * On failure returns negative value.
+ */
+static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable)
+{
+	int ret = 0;
+	mutex_lock(&di->cc_lock);
+	if (enable) {
+		/* To be able to reprogram the number of samples, we have to
+		 * first stop the CC and then enable it again */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG, 0x00);
+		if (ret)
+			goto cc_err;
+
+		/* Program the samples */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
+			di->fg_samples);
+		if (ret)
+			goto cc_err;
+
+		/* Start the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG,
+			(CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
+		if (ret)
+			goto cc_err;
+
+		di->flags.fg_enabled = true;
+	} else {
+		/* Clear any pending read requests */
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			(RESET_ACCU | READ_REQ), 0);
+		if (ret)
+			goto cc_err;
+
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU_CTRL, 0);
+		if (ret)
+			goto cc_err;
+
+		/* Stop the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG, 0);
+		if (ret)
+			goto cc_err;
+
+		di->flags.fg_enabled = false;
+
+	}
+	dev_dbg(di->dev, " CC enabled: %d Samples: %d\n",
+		enable, di->fg_samples);
+
+	mutex_unlock(&di->cc_lock);
+
+	return ret;
+cc_err:
+	dev_err(di->dev, "%s Enabling coulomb counter failed\n", __func__);
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_start() - start battery instantaneous current
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns 0 or error code
+ * Note: This is part "one" and has to be called before
+ * ab8500_fg_inst_curr_finalize()
+ */
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+{
+	u8 reg_val;
+	int ret;
+
+	mutex_lock(&di->cc_lock);
+
+	di->nbr_cceoc_irq_cnt = 0;
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8500_RTC_CC_CONF_REG, &reg_val);
+	if (ret < 0)
+		goto fail;
+
+	if (!(reg_val & CC_PWR_UP_ENA)) {
+		dev_dbg(di->dev, "%s Enable FG\n", __func__);
+		di->turn_off_fg = true;
+
+		/* Program the samples */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
+			SEC_TO_SAMPLE(10));
+		if (ret)
+			goto fail;
+
+		/* Start the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG,
+			(CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
+		if (ret)
+			goto fail;
+	} else {
+		di->turn_off_fg = false;
+	}
+
+	/* Return and WFI */
+	reinit_completion(&di->ab8500_fg_started);
+	reinit_completion(&di->ab8500_fg_complete);
+	enable_irq(di->irq);
+
+	/* Note: cc_lock is still locked */
+	return 0;
+fail:
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_started() - check if fg conversion has started
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion started, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di)
+{
+	return completion_done(&di->ab8500_fg_started);
+}
+
+/**
+ * ab8500_fg_inst_curr_done() - check if fg conversion is done
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion done, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
+{
+	return completion_done(&di->ab8500_fg_complete);
+}
+
+/**
+ * ab8500_fg_inst_curr_finalize() - battery instantaneous current
+ * @di:         pointer to the ab8500_fg structure
+ * @curr_ua:	battery instantenous current in microampere (on success)
+ *
+ * Returns 0 or an error code
+ * Note: This is part "two" and has to be called at earliest 250 ms
+ * after ab8500_fg_inst_curr_start()
+ */
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *curr_ua)
+{
+	u8 low, high;
+	int val;
+	int ret;
+	unsigned long timeout;
+
+	if (!completion_done(&di->ab8500_fg_complete)) {
+		timeout = wait_for_completion_timeout(
+			&di->ab8500_fg_complete,
+			INS_CURR_TIMEOUT);
+		dev_dbg(di->dev, "Finalize time: %d ms\n",
+			jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
+		if (!timeout) {
+			ret = -ETIME;
+			disable_irq(di->irq);
+			di->nbr_cceoc_irq_cnt = 0;
+			dev_err(di->dev, "completion timed out [%d]\n",
+				__LINE__);
+			goto fail;
+		}
+	}
+
+	disable_irq(di->irq);
+	di->nbr_cceoc_irq_cnt = 0;
+
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			READ_REQ, READ_REQ);
+
+	/* 100uS between read request and read is needed */
+	usleep_range(100, 100);
+
+	/* Read CC Sample conversion value Low and high */
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_SMPL_CNVL_REG,  &low);
+	if (ret < 0)
+		goto fail;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_SMPL_CNVH_REG,  &high);
+	if (ret < 0)
+		goto fail;
+
+	/*
+	 * negative value for Discharging
+	 * convert 2's complement into decimal
+	 */
+	if (high & 0x10)
+		val = (low | (high << 8) | 0xFFFFE000);
+	else
+		val = (low | (high << 8));
+
+	/*
+	 * Convert to unit value in mA
+	 * Full scale input voltage is
+	 * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542.000 uA
+	 * Given a 250ms conversion cycle time the LSB corresponds
+	 * to 107.1 nAh. Convert to current by dividing by the conversion
+	 * time in hours (250ms = 1 / (3600 * 4)h)
+	 * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+	 */
+	val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / di->bm->fg_res;
+
+	if (di->turn_off_fg) {
+		dev_dbg(di->dev, "%s Disable FG\n", __func__);
+
+		/* Clear any pending read requests */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
+		if (ret)
+			goto fail;
+
+		/* Stop the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG, 0);
+		if (ret)
+			goto fail;
+	}
+	mutex_unlock(&di->cc_lock);
+	*curr_ua = val;
+
+	return 0;
+fail:
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_blocking() - battery instantaneous current
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns battery instantenous current in microampere (on success)
+ * else error code
+ */
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
+{
+	int ret;
+	unsigned long timeout;
+	int curr_ua = 0;
+
+	ret = ab8500_fg_inst_curr_start(di);
+	if (ret) {
+		dev_err(di->dev, "Failed to initialize fg_inst\n");
+		return 0;
+	}
+
+	/* Wait for CC to actually start */
+	if (!completion_done(&di->ab8500_fg_started)) {
+		timeout = wait_for_completion_timeout(
+			&di->ab8500_fg_started,
+			INS_CURR_TIMEOUT);
+		dev_dbg(di->dev, "Start time: %d ms\n",
+			jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
+		if (!timeout) {
+			ret = -ETIME;
+			dev_err(di->dev, "completion timed out [%d]\n",
+				__LINE__);
+			goto fail;
+		}
+	}
+
+	ret = ab8500_fg_inst_curr_finalize(di, &curr_ua);
+	if (ret) {
+		dev_err(di->dev, "Failed to finalize fg_inst\n");
+		return 0;
+	}
+
+	dev_dbg(di->dev, "%s instant current: %d uA", __func__, curr_ua);
+	return curr_ua;
+fail:
+	disable_irq(di->irq);
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_acc_cur_work() - average battery current
+ * @work:	pointer to the work_struct structure
+ *
+ * Updated the average battery current obtained from the
+ * coulomb counter.
+ */
+static void ab8500_fg_acc_cur_work(struct work_struct *work)
+{
+	int val;
+	int ret;
+	u8 low, med, high;
+
+	struct ab8500_fg *di = container_of(work,
+		struct ab8500_fg, fg_acc_cur_work);
+
+	mutex_lock(&di->cc_lock);
+	ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_CTRL, RD_NCONV_ACCU_REQ);
+	if (ret)
+		goto exit;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_LOW,  &low);
+	if (ret < 0)
+		goto exit;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_MED,  &med);
+	if (ret < 0)
+		goto exit;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_HIGH, &high);
+	if (ret < 0)
+		goto exit;
+
+	/* Check for sign bit in case of negative value, 2's complement */
+	if (high & 0x10)
+		val = (low | (med << 8) | (high << 16) | 0xFFE00000);
+	else
+		val = (low | (med << 8) | (high << 16));
+
+	/*
+	 * Convert to uAh
+	 * Given a 250ms conversion cycle time the LSB corresponds
+	 * to 112.9 nAh.
+	 * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+	 */
+	di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
+		(100 * di->bm->fg_res);
+
+	/*
+	 * Convert to unit value in uA
+	 * by dividing by the conversion
+	 * time in hours (= samples / (3600 * 4)h)
+	 */
+	di->avg_curr_ua = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
+		(di->bm->fg_res * (di->fg_samples / 4));
+
+	di->flags.conv_done = true;
+
+	mutex_unlock(&di->cc_lock);
+
+	queue_work(di->fg_wq, &di->fg_work);
+
+	dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
+				di->bm->fg_res, di->fg_samples, val, di->accu_charge);
+	return;
+exit:
+	dev_err(di->dev,
+		"Failed to read or write gas gauge registers\n");
+	mutex_unlock(&di->cc_lock);
+	queue_work(di->fg_wq, &di->fg_work);
+}
+
+/**
+ * ab8500_fg_bat_voltage() - get battery voltage
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Returns battery voltage in microvolts (on success) else error code
+ */
+static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
+{
+	int vbat, ret;
+	static int prev;
+
+	ret = iio_read_channel_processed(di->main_bat_v, &vbat);
+	if (ret < 0) {
+		dev_err(di->dev,
+			"%s ADC conversion failed, using previous value\n",
+			__func__);
+		return prev;
+	}
+
+	/* IIO returns millivolts but we want microvolts */
+	vbat *= 1000;
+	prev = vbat;
+	return vbat;
+}
+
+/**
+ * ab8500_fg_volt_to_capacity() - Voltage based capacity
+ * @di:		pointer to the ab8500_fg structure
+ * @voltage_uv:	The voltage to convert to a capacity in microvolt
+ *
+ * Returns battery capacity in per mille based on voltage
+ */
+static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage_uv)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+
+	/* Multiply by 10 because the capacity is tracked in per mille */
+	return power_supply_batinfo_ocv2cap(bi, voltage_uv, di->bat_temp) *  10;
+}
+
+/**
+ * ab8500_fg_uncomp_volt_to_capacity() - Uncompensated voltage based capacity
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Returns battery capacity based on battery voltage that is not compensated
+ * for the voltage drop due to the load
+ */
+static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
+{
+	di->vbat_uv = ab8500_fg_bat_voltage(di);
+	return ab8500_fg_volt_to_capacity(di, di->vbat_uv);
+}
+
+/**
+ * ab8500_fg_battery_resistance() - Returns the battery inner resistance
+ * @di:		pointer to the ab8500_fg structure
+ * @vbat_uncomp_uv: Uncompensated VBAT voltage
+ *
+ * Returns battery inner resistance added with the fuel gauge resistor value
+ * to get the total resistance in the whole link from gnd to bat+ node
+ * in milliohm.
+ */
+static int ab8500_fg_battery_resistance(struct ab8500_fg *di, int vbat_uncomp_uv)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+	int resistance_percent = 0;
+	int resistance;
+
+	/*
+	 * Determine the resistance at this voltage. First try VBAT-to-Ri else
+	 * just infer it from the surrounding temperature, if nothing works just
+	 * use the internal resistance.
+	 */
+	if (power_supply_supports_vbat2ri(bi)) {
+		resistance = power_supply_vbat2ri(bi, vbat_uncomp_uv, di->flags.charging);
+		/* Convert to milliohm */
+		resistance = resistance / 1000;
+	} else if (power_supply_supports_temp2ri(bi)) {
+		resistance_percent = power_supply_temp2resist_simple(bi->resist_table,
+								     bi->resist_table_size,
+								     di->bat_temp / 10);
+		/* Convert to milliohm */
+		resistance = bi->factory_internal_resistance_uohm / 1000;
+		resistance = resistance * resistance_percent / 100;
+	} else {
+		/* Last fallback */
+		resistance = bi->factory_internal_resistance_uohm / 1000;
+	}
+
+	/* Compensate for line impedance */
+	resistance += (di->line_impedance_uohm / 1000);
+
+	dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
+	    " fg resistance %d, total: %d (mOhm)\n",
+		__func__, di->bat_temp, resistance, di->bm->fg_res / 10,
+		(di->bm->fg_res / 10) + resistance);
+
+	/* fg_res variable is in 0.1mOhm */
+	resistance += di->bm->fg_res / 10;
+
+	return resistance;
+}
+
+/**
+ * ab8500_load_comp_fg_bat_voltage() - get load compensated battery voltage
+ * @di:		pointer to the ab8500_fg structure
+ * @always:	always return a voltage, also uncompensated
+ *
+ * Returns compensated battery voltage (on success) else error code.
+ * If always is specified, we always return a voltage but it may be
+ * uncompensated.
+ */
+static int ab8500_load_comp_fg_bat_voltage(struct ab8500_fg *di, bool always)
+{
+	int i = 0;
+	int vbat_uv = 0;
+	int rcomp;
+
+	/* Average the instant current to get a stable current measurement */
+	ab8500_fg_inst_curr_start(di);
+
+	do {
+		vbat_uv += ab8500_fg_bat_voltage(di);
+		i++;
+		usleep_range(5000, 6000);
+	} while (!ab8500_fg_inst_curr_done(di) &&
+		 i <= WAIT_FOR_INST_CURRENT_MAX);
+
+	if (i > WAIT_FOR_INST_CURRENT_MAX) {
+		dev_err(di->dev,
+			"TIMEOUT: return uncompensated measurement of VBAT\n");
+		di->vbat_uv = vbat_uv / i;
+		return di->vbat_uv;
+	}
+
+	ab8500_fg_inst_curr_finalize(di, &di->inst_curr_ua);
+
+	/*
+	 * If there is too high current dissipation, the compensation cannot be
+	 * trusted so return an error unless we must return something here, as
+	 * enforced by the "always" parameter.
+	 */
+	if (!always && di->inst_curr_ua < IGNORE_VBAT_HIGHCUR)
+		return -EINVAL;
+
+	vbat_uv = vbat_uv / i;
+
+	/* Next we apply voltage compensation from internal resistance */
+	rcomp = ab8500_fg_battery_resistance(di, vbat_uv);
+	vbat_uv = vbat_uv - (di->inst_curr_ua * rcomp) / 1000;
+
+	/* Always keep this state at latest measurement */
+	di->vbat_uv = vbat_uv;
+
+	return vbat_uv;
+}
+
+/**
+ * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Returns battery capacity based on battery voltage that is load compensated
+ * for the voltage drop
+ */
+static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di)
+{
+	int vbat_comp_uv;
+
+	vbat_comp_uv = ab8500_load_comp_fg_bat_voltage(di, true);
+
+	return ab8500_fg_volt_to_capacity(di, vbat_comp_uv);
+}
+
+/**
+ * ab8500_fg_convert_mah_to_permille() - Capacity in mAh to permille
+ * @di:		pointer to the ab8500_fg structure
+ * @cap_mah:	capacity in mAh
+ *
+ * Converts capacity in mAh to capacity in permille
+ */
+static int ab8500_fg_convert_mah_to_permille(struct ab8500_fg *di, int cap_mah)
+{
+	return (cap_mah * 1000) / di->bat_cap.max_mah_design;
+}
+
+/**
+ * ab8500_fg_convert_permille_to_mah() - Capacity in permille to mAh
+ * @di:		pointer to the ab8500_fg structure
+ * @cap_pm:	capacity in permille
+ *
+ * Converts capacity in permille to capacity in mAh
+ */
+static int ab8500_fg_convert_permille_to_mah(struct ab8500_fg *di, int cap_pm)
+{
+	return cap_pm * di->bat_cap.max_mah_design / 1000;
+}
+
+/**
+ * ab8500_fg_convert_mah_to_uwh() - Capacity in mAh to uWh
+ * @di:		pointer to the ab8500_fg structure
+ * @cap_mah:	capacity in mAh
+ *
+ * Converts capacity in mAh to capacity in uWh
+ */
+static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah)
+{
+	u64 div_res;
+	u32 div_rem;
+
+	/*
+	 * Capacity is in milli ampere hours (10^-3)Ah
+	 * Nominal voltage is in microvolts (10^-6)V
+	 * divide by 1000000 after multiplication to get to mWh
+	 */
+	div_res = ((u64) cap_mah) * ((u64) di->vbat_nom_uv);
+	div_rem = do_div(div_res, 1000000);
+
+	/* Make sure to round upwards if necessary */
+	if (div_rem >= 1000000 / 2)
+		div_res++;
+
+	return (int) div_res;
+}
+
+/**
+ * ab8500_fg_calc_cap_charging() - Calculate remaining capacity while charging
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on previous calculated capcity and the FG
+ * accumulator register value. The filter is filled with this capacity
+ */
+static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di)
+{
+	dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
+		__func__,
+		di->bat_cap.mah,
+		di->accu_charge);
+
+	/* Capacity should not be less than 0 */
+	if (di->bat_cap.mah + di->accu_charge > 0)
+		di->bat_cap.mah += di->accu_charge;
+	else
+		di->bat_cap.mah = 0;
+	/*
+	 * We force capacity to 100% once when the algorithm
+	 * reports that it's full.
+	 */
+	if (di->bat_cap.mah >= di->bat_cap.max_mah_design ||
+		di->flags.force_full) {
+		di->bat_cap.mah = di->bat_cap.max_mah_design;
+	}
+
+	ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+	di->bat_cap.permille =
+		ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+
+	/* We need to update battery voltage and inst current when charging */
+	di->vbat_uv = ab8500_fg_bat_voltage(di);
+	di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
+
+	return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on the load compensated battery voltage.
+ * This value is added to the filter and a new mean value is calculated and
+ * returned.
+ */
+static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di)
+{
+	int permille, mah;
+
+	permille = ab8500_fg_load_comp_volt_to_capacity(di);
+
+	mah = ab8500_fg_convert_permille_to_mah(di, permille);
+
+	di->bat_cap.mah = ab8500_fg_add_cap_sample(di, mah);
+	di->bat_cap.permille =
+		ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+
+	return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_calc_cap_discharge_fg() - Capacity in discharge with FG
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on previous calculated capcity and the FG
+ * accumulator register value. This value is added to the filter and a
+ * new mean value is calculated and returned.
+ */
+static int ab8500_fg_calc_cap_discharge_fg(struct ab8500_fg *di)
+{
+	int permille_volt, permille;
+
+	dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
+		__func__,
+		di->bat_cap.mah,
+		di->accu_charge);
+
+	/* Capacity should not be less than 0 */
+	if (di->bat_cap.mah + di->accu_charge > 0)
+		di->bat_cap.mah += di->accu_charge;
+	else
+		di->bat_cap.mah = 0;
+
+	if (di->bat_cap.mah >= di->bat_cap.max_mah_design)
+		di->bat_cap.mah = di->bat_cap.max_mah_design;
+
+	/*
+	 * Check against voltage based capacity. It can not be lower
+	 * than what the uncompensated voltage says
+	 */
+	permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+	permille_volt = ab8500_fg_uncomp_volt_to_capacity(di);
+
+	if (permille < permille_volt) {
+		di->bat_cap.permille = permille_volt;
+		di->bat_cap.mah = ab8500_fg_convert_permille_to_mah(di,
+			di->bat_cap.permille);
+
+		dev_dbg(di->dev, "%s voltage based: perm %d perm_volt %d\n",
+			__func__,
+			permille,
+			permille_volt);
+
+		ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+	} else {
+		ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+		di->bat_cap.permille =
+			ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+	}
+
+	return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_capacity_level() - Get the battery capacity level
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Get the battery capacity level based on the capacity in percent
+ */
+static int ab8500_fg_capacity_level(struct ab8500_fg *di)
+{
+	int ret, percent;
+
+	percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
+
+	if (percent <= di->bm->cap_levels->critical ||
+		di->flags.low_bat)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+	else if (percent <= di->bm->cap_levels->low)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+	else if (percent <= di->bm->cap_levels->normal)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	else if (percent <= di->bm->cap_levels->high)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+	else
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+
+	return ret;
+}
+
+/**
+ * ab8500_fg_calculate_scaled_capacity() - Capacity scaling
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Calculates the capacity to be shown to upper layers. Scales the capacity
+ * to have 100% as a reference from the actual capacity upon removal of charger
+ * when charging is in maintenance mode.
+ */
+static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di)
+{
+	struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+	int capacity = di->bat_cap.prev_percent;
+
+	if (!cs->enable)
+		return capacity;
+
+	/*
+	 * As long as we are in fully charge mode scale the capacity
+	 * to show 100%.
+	 */
+	if (di->flags.fully_charged) {
+		cs->cap_to_scale[0] = 100;
+		cs->cap_to_scale[1] =
+			max(capacity, di->bm->fg_params->maint_thres);
+		dev_dbg(di->dev, "Scale cap with %d/%d\n",
+			 cs->cap_to_scale[0], cs->cap_to_scale[1]);
+	}
+
+	/* Calculates the scaled capacity. */
+	if ((cs->cap_to_scale[0] != cs->cap_to_scale[1])
+					&& (cs->cap_to_scale[1] > 0))
+		capacity = min(100,
+				 DIV_ROUND_CLOSEST(di->bat_cap.prev_percent *
+						 cs->cap_to_scale[0],
+						 cs->cap_to_scale[1]));
+
+	if (di->flags.charging) {
+		if (capacity < cs->disable_cap_level) {
+			cs->disable_cap_level = capacity;
+			dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n",
+				cs->disable_cap_level);
+		} else if (!di->flags.fully_charged) {
+			if (di->bat_cap.prev_percent >=
+			    cs->disable_cap_level) {
+				dev_dbg(di->dev, "Disabling scaled capacity\n");
+				cs->enable = false;
+				capacity = di->bat_cap.prev_percent;
+			} else {
+				dev_dbg(di->dev,
+					"Waiting in cap to level %d%%\n",
+					cs->disable_cap_level);
+				capacity = cs->disable_cap_level;
+			}
+		}
+	}
+
+	return capacity;
+}
+
+/**
+ * ab8500_fg_update_cap_scalers() - Capacity scaling
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * To be called when state change from charge<->discharge to update
+ * the capacity scalers.
+ */
+static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di)
+{
+	struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+
+	if (!cs->enable)
+		return;
+	if (di->flags.charging) {
+		di->bat_cap.cap_scale.disable_cap_level =
+			di->bat_cap.cap_scale.scaled_cap;
+		dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n",
+				di->bat_cap.cap_scale.disable_cap_level);
+	} else {
+		if (cs->scaled_cap != 100) {
+			cs->cap_to_scale[0] = cs->scaled_cap;
+			cs->cap_to_scale[1] = di->bat_cap.prev_percent;
+		} else {
+			cs->cap_to_scale[0] = 100;
+			cs->cap_to_scale[1] =
+				max(di->bat_cap.prev_percent,
+				    di->bm->fg_params->maint_thres);
+		}
+
+		dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n",
+				cs->cap_to_scale[0], cs->cap_to_scale[1]);
+	}
+}
+
+/**
+ * ab8500_fg_check_capacity_limits() - Check if capacity has changed
+ * @di:		pointer to the ab8500_fg structure
+ * @init:	capacity is allowed to go up in init mode
+ *
+ * Check if capacity or capacity limit has changed and notify the system
+ * about it using the power_supply framework
+ */
+static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
+{
+	bool changed = false;
+	int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
+
+	di->bat_cap.level = ab8500_fg_capacity_level(di);
+
+	if (di->bat_cap.level != di->bat_cap.prev_level) {
+		/*
+		 * We do not allow reported capacity level to go up
+		 * unless we're charging or if we're in init
+		 */
+		if (!(!di->flags.charging && di->bat_cap.level >
+			di->bat_cap.prev_level) || init) {
+			dev_dbg(di->dev, "level changed from %d to %d\n",
+				di->bat_cap.prev_level,
+				di->bat_cap.level);
+			di->bat_cap.prev_level = di->bat_cap.level;
+			changed = true;
+		} else {
+			dev_dbg(di->dev, "level not allowed to go up "
+				"since no charger is connected: %d to %d\n",
+				di->bat_cap.prev_level,
+				di->bat_cap.level);
+		}
+	}
+
+	/*
+	 * If we have received the LOW_BAT IRQ, set capacity to 0 to initiate
+	 * shutdown
+	 */
+	if (di->flags.low_bat) {
+		dev_dbg(di->dev, "Battery low, set capacity to 0\n");
+		di->bat_cap.prev_percent = 0;
+		di->bat_cap.permille = 0;
+		percent = 0;
+		di->bat_cap.prev_mah = 0;
+		di->bat_cap.mah = 0;
+		changed = true;
+	} else if (di->flags.fully_charged) {
+		/*
+		 * We report 100% if algorithm reported fully charged
+		 * and show 100% during maintenance charging (scaling).
+		 */
+		if (di->flags.force_full) {
+			di->bat_cap.prev_percent = percent;
+			di->bat_cap.prev_mah = di->bat_cap.mah;
+
+			changed = true;
+
+			if (!di->bat_cap.cap_scale.enable &&
+						di->bm->capacity_scaling) {
+				di->bat_cap.cap_scale.enable = true;
+				di->bat_cap.cap_scale.cap_to_scale[0] = 100;
+				di->bat_cap.cap_scale.cap_to_scale[1] =
+						di->bat_cap.prev_percent;
+				di->bat_cap.cap_scale.disable_cap_level = 100;
+			}
+		} else if (di->bat_cap.prev_percent != percent) {
+			dev_dbg(di->dev,
+				"battery reported full "
+				"but capacity dropping: %d\n",
+				percent);
+			di->bat_cap.prev_percent = percent;
+			di->bat_cap.prev_mah = di->bat_cap.mah;
+
+			changed = true;
+		}
+	} else if (di->bat_cap.prev_percent != percent) {
+		if (percent == 0) {
+			/*
+			 * We will not report 0% unless we've got
+			 * the LOW_BAT IRQ, no matter what the FG
+			 * algorithm says.
+			 */
+			di->bat_cap.prev_percent = 1;
+			percent = 1;
+
+			changed = true;
+		} else if (!(!di->flags.charging &&
+			percent > di->bat_cap.prev_percent) || init) {
+			/*
+			 * We do not allow reported capacity to go up
+			 * unless we're charging or if we're in init
+			 */
+			dev_dbg(di->dev,
+				"capacity changed from %d to %d (%d)\n",
+				di->bat_cap.prev_percent,
+				percent,
+				di->bat_cap.permille);
+			di->bat_cap.prev_percent = percent;
+			di->bat_cap.prev_mah = di->bat_cap.mah;
+
+			changed = true;
+		} else {
+			dev_dbg(di->dev, "capacity not allowed to go up since "
+				"no charger is connected: %d to %d (%d)\n",
+				di->bat_cap.prev_percent,
+				percent,
+				di->bat_cap.permille);
+		}
+	}
+
+	if (changed) {
+		if (di->bm->capacity_scaling) {
+			di->bat_cap.cap_scale.scaled_cap =
+				ab8500_fg_calculate_scaled_capacity(di);
+
+			dev_info(di->dev, "capacity=%d (%d)\n",
+				di->bat_cap.prev_percent,
+				di->bat_cap.cap_scale.scaled_cap);
+		}
+		power_supply_changed(di->fg_psy);
+		if (di->flags.fully_charged && di->flags.force_full) {
+			dev_dbg(di->dev, "Battery full, notifying.\n");
+			di->flags.force_full = false;
+			sysfs_notify(&di->fg_kobject, NULL, "charge_full");
+		}
+		sysfs_notify(&di->fg_kobject, NULL, "charge_now");
+	}
+}
+
+static void ab8500_fg_charge_state_to(struct ab8500_fg *di,
+	enum ab8500_fg_charge_state new_state)
+{
+	dev_dbg(di->dev, "Charge state from %d [%s] to %d [%s]\n",
+		di->charge_state,
+		charge_state[di->charge_state],
+		new_state,
+		charge_state[new_state]);
+
+	di->charge_state = new_state;
+}
+
+static void ab8500_fg_discharge_state_to(struct ab8500_fg *di,
+	enum ab8500_fg_discharge_state new_state)
+{
+	dev_dbg(di->dev, "Discharge state from %d [%s] to %d [%s]\n",
+		di->discharge_state,
+		discharge_state[di->discharge_state],
+		new_state,
+		discharge_state[new_state]);
+
+	di->discharge_state = new_state;
+}
+
+/**
+ * ab8500_fg_algorithm_charging() - FG algorithm for when charging
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Battery capacity calculation state machine for when we're charging
+ */
+static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
+{
+	/*
+	 * If we change to discharge mode
+	 * we should start with recovery
+	 */
+	if (di->discharge_state != AB8500_FG_DISCHARGE_INIT_RECOVERY)
+		ab8500_fg_discharge_state_to(di,
+			AB8500_FG_DISCHARGE_INIT_RECOVERY);
+
+	switch (di->charge_state) {
+	case AB8500_FG_CHARGE_INIT:
+		di->fg_samples = SEC_TO_SAMPLE(
+			di->bm->fg_params->accu_charging);
+
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
+
+		break;
+
+	case AB8500_FG_CHARGE_READOUT:
+		/*
+		 * Read the FG and calculate the new capacity
+		 */
+		mutex_lock(&di->cc_lock);
+		if (!di->flags.conv_done && !di->flags.force_full) {
+			/* Wasn't the CC IRQ that got us here */
+			mutex_unlock(&di->cc_lock);
+			dev_dbg(di->dev, "%s CC conv not done\n",
+				__func__);
+
+			break;
+		}
+		di->flags.conv_done = false;
+		mutex_unlock(&di->cc_lock);
+
+		ab8500_fg_calc_cap_charging(di);
+
+		break;
+
+	default:
+		break;
+	}
+
+	/* Check capacity limits */
+	ab8500_fg_check_capacity_limits(di, false);
+}
+
+static void force_capacity(struct ab8500_fg *di)
+{
+	int cap;
+
+	ab8500_fg_clear_cap_samples(di);
+	cap = di->bat_cap.user_mah;
+	if (cap > di->bat_cap.max_mah_design) {
+		dev_dbg(di->dev, "Remaining cap %d can't be bigger than total"
+			" %d\n", cap, di->bat_cap.max_mah_design);
+		cap = di->bat_cap.max_mah_design;
+	}
+	ab8500_fg_fill_cap_sample(di, di->bat_cap.user_mah);
+	di->bat_cap.permille = ab8500_fg_convert_mah_to_permille(di, cap);
+	di->bat_cap.mah = cap;
+	ab8500_fg_check_capacity_limits(di, true);
+}
+
+static bool check_sysfs_capacity(struct ab8500_fg *di)
+{
+	int cap, lower, upper;
+	int cap_permille;
+
+	cap = di->bat_cap.user_mah;
+
+	cap_permille = ab8500_fg_convert_mah_to_permille(di,
+		di->bat_cap.user_mah);
+
+	lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
+	upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
+
+	if (lower < 0)
+		lower = 0;
+	/* 1000 is permille, -> 100 percent */
+	if (upper > 1000)
+		upper = 1000;
+
+	dev_dbg(di->dev, "Capacity limits:"
+		" (Lower: %d User: %d Upper: %d) [user: %d, was: %d]\n",
+		lower, cap_permille, upper, cap, di->bat_cap.mah);
+
+	/* If within limits, use the saved capacity and exit estimation...*/
+	if (cap_permille > lower && cap_permille < upper) {
+		dev_dbg(di->dev, "OK! Using users cap %d uAh now\n", cap);
+		force_capacity(di);
+		return true;
+	}
+	dev_dbg(di->dev, "Capacity from user out of limits, ignoring");
+	return false;
+}
+
+/**
+ * ab8500_fg_algorithm_discharging() - FG algorithm for when discharging
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Battery capacity calculation state machine for when we're discharging
+ */
+static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
+{
+	int sleep_time;
+
+	/* If we change to charge mode we should start with init */
+	if (di->charge_state != AB8500_FG_CHARGE_INIT)
+		ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+
+	switch (di->discharge_state) {
+	case AB8500_FG_DISCHARGE_INIT:
+		/* We use the FG IRQ to work on */
+		di->init_cnt = 0;
+		di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_discharge_state_to(di,
+			AB8500_FG_DISCHARGE_INITMEASURING);
+
+		fallthrough;
+	case AB8500_FG_DISCHARGE_INITMEASURING:
+		/*
+		 * Discard a number of samples during startup.
+		 * After that, use compensated voltage for a few
+		 * samples to get an initial capacity.
+		 * Then go to READOUT
+		 */
+		sleep_time = di->bm->fg_params->init_timer;
+
+		/* Discard the first [x] seconds */
+		if (di->init_cnt > di->bm->fg_params->init_discard_time) {
+			ab8500_fg_calc_cap_discharge_voltage(di);
+
+			ab8500_fg_check_capacity_limits(di, true);
+		}
+
+		di->init_cnt += sleep_time;
+		if (di->init_cnt > di->bm->fg_params->init_total_time)
+			ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT_INIT);
+
+		break;
+
+	case AB8500_FG_DISCHARGE_INIT_RECOVERY:
+		di->recovery_cnt = 0;
+		di->recovery_needed = true;
+		ab8500_fg_discharge_state_to(di,
+			AB8500_FG_DISCHARGE_RECOVERY);
+
+		fallthrough;
+
+	case AB8500_FG_DISCHARGE_RECOVERY:
+		sleep_time = di->bm->fg_params->recovery_sleep_timer;
+
+		/*
+		 * We should check the power consumption
+		 * If low, go to READOUT (after x min) or
+		 * RECOVERY_SLEEP if time left.
+		 * If high, go to READOUT
+		 */
+		di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
+
+		if (ab8500_fg_is_low_curr(di, di->inst_curr_ua)) {
+			if (di->recovery_cnt >
+				di->bm->fg_params->recovery_total_time) {
+				di->fg_samples = SEC_TO_SAMPLE(
+					di->bm->fg_params->accu_high_curr);
+				ab8500_fg_coulomb_counter(di, true);
+				ab8500_fg_discharge_state_to(di,
+					AB8500_FG_DISCHARGE_READOUT);
+				di->recovery_needed = false;
+			} else {
+				queue_delayed_work(di->fg_wq,
+					&di->fg_periodic_work,
+					sleep_time * HZ);
+			}
+			di->recovery_cnt += sleep_time;
+		} else {
+			di->fg_samples = SEC_TO_SAMPLE(
+				di->bm->fg_params->accu_high_curr);
+			ab8500_fg_coulomb_counter(di, true);
+			ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT);
+		}
+		break;
+
+	case AB8500_FG_DISCHARGE_READOUT_INIT:
+		di->fg_samples = SEC_TO_SAMPLE(
+			di->bm->fg_params->accu_high_curr);
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT);
+		break;
+
+	case AB8500_FG_DISCHARGE_READOUT:
+		di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
+
+		if (ab8500_fg_is_low_curr(di, di->inst_curr_ua)) {
+			/* Detect mode change */
+			if (di->high_curr_mode) {
+				di->high_curr_mode = false;
+				di->high_curr_cnt = 0;
+			}
+
+			if (di->recovery_needed) {
+				ab8500_fg_discharge_state_to(di,
+					AB8500_FG_DISCHARGE_INIT_RECOVERY);
+
+				queue_delayed_work(di->fg_wq,
+					&di->fg_periodic_work, 0);
+
+				break;
+			}
+
+			ab8500_fg_calc_cap_discharge_voltage(di);
+		} else {
+			mutex_lock(&di->cc_lock);
+			if (!di->flags.conv_done) {
+				/* Wasn't the CC IRQ that got us here */
+				mutex_unlock(&di->cc_lock);
+				dev_dbg(di->dev, "%s CC conv not done\n",
+					__func__);
+
+				break;
+			}
+			di->flags.conv_done = false;
+			mutex_unlock(&di->cc_lock);
+
+			/* Detect mode change */
+			if (!di->high_curr_mode) {
+				di->high_curr_mode = true;
+				di->high_curr_cnt = 0;
+			}
+
+			di->high_curr_cnt +=
+				di->bm->fg_params->accu_high_curr;
+			if (di->high_curr_cnt >
+				di->bm->fg_params->high_curr_time)
+				di->recovery_needed = true;
+
+			ab8500_fg_calc_cap_discharge_fg(di);
+		}
+
+		ab8500_fg_check_capacity_limits(di, false);
+
+		break;
+
+	case AB8500_FG_DISCHARGE_WAKEUP:
+		ab8500_fg_calc_cap_discharge_voltage(di);
+
+		di->fg_samples = SEC_TO_SAMPLE(
+			di->bm->fg_params->accu_high_curr);
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT);
+
+		ab8500_fg_check_capacity_limits(di, false);
+
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * ab8500_fg_algorithm_calibrate() - Internal columb counter offset calibration
+ * @di:		pointer to the ab8500_fg structure
+ *
+ */
+static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di)
+{
+	int ret;
+
+	switch (di->calib_state) {
+	case AB8500_FG_CALIB_INIT:
+		dev_dbg(di->dev, "Calibration ongoing...\n");
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			CC_INT_CAL_N_AVG_MASK, CC_INT_CAL_SAMPLES_8);
+		if (ret < 0)
+			goto err;
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			CC_INTAVGOFFSET_ENA, CC_INTAVGOFFSET_ENA);
+		if (ret < 0)
+			goto err;
+		di->calib_state = AB8500_FG_CALIB_WAIT;
+		break;
+	case AB8500_FG_CALIB_END:
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			CC_MUXOFFSET, CC_MUXOFFSET);
+		if (ret < 0)
+			goto err;
+		di->flags.calibrate = false;
+		dev_dbg(di->dev, "Calibration done...\n");
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+		break;
+	case AB8500_FG_CALIB_WAIT:
+		dev_dbg(di->dev, "Calibration WFI\n");
+		break;
+	default:
+		break;
+	}
+	return;
+err:
+	/* Something went wrong, don't calibrate then */
+	dev_err(di->dev, "failed to calibrate the CC\n");
+	di->flags.calibrate = false;
+	di->calib_state = AB8500_FG_CALIB_INIT;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+}
+
+/**
+ * ab8500_fg_algorithm() - Entry point for the FG algorithm
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Entry point for the battery capacity calculation state machine
+ */
+static void ab8500_fg_algorithm(struct ab8500_fg *di)
+{
+	if (di->flags.calibrate)
+		ab8500_fg_algorithm_calibrate(di);
+	else {
+		if (di->flags.charging)
+			ab8500_fg_algorithm_charging(di);
+		else
+			ab8500_fg_algorithm_discharging(di);
+	}
+
+	dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d "
+		"%d %d %d %d %d %d %d\n",
+		di->bat_cap.max_mah_design,
+		di->bat_cap.max_mah,
+		di->bat_cap.mah,
+		di->bat_cap.permille,
+		di->bat_cap.level,
+		di->bat_cap.prev_mah,
+		di->bat_cap.prev_percent,
+		di->bat_cap.prev_level,
+		di->vbat_uv,
+		di->inst_curr_ua,
+		di->avg_curr_ua,
+		di->accu_charge,
+		di->flags.charging,
+		di->charge_state,
+		di->discharge_state,
+		di->high_curr_mode,
+		di->recovery_needed);
+}
+
+/**
+ * ab8500_fg_periodic_work() - Run the FG state machine periodically
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for periodic work
+ */
+static void ab8500_fg_periodic_work(struct work_struct *work)
+{
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_periodic_work.work);
+
+	if (di->init_capacity) {
+		/* Get an initial capacity calculation */
+		ab8500_fg_calc_cap_discharge_voltage(di);
+		ab8500_fg_check_capacity_limits(di, true);
+		di->init_capacity = false;
+
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	} else if (di->flags.user_cap) {
+		if (check_sysfs_capacity(di)) {
+			ab8500_fg_check_capacity_limits(di, true);
+			if (di->flags.charging)
+				ab8500_fg_charge_state_to(di,
+					AB8500_FG_CHARGE_INIT);
+			else
+				ab8500_fg_discharge_state_to(di,
+					AB8500_FG_DISCHARGE_READOUT_INIT);
+		}
+		di->flags.user_cap = false;
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	} else
+		ab8500_fg_algorithm(di);
+
+}
+
+/**
+ * ab8500_fg_check_hw_failure_work() - Check OVV_BAT condition
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the OVV_BAT condition
+ */
+static void ab8500_fg_check_hw_failure_work(struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_check_hw_failure_work.work);
+
+	/*
+	 * If we have had a battery over-voltage situation,
+	 * check ovv-bit to see if it should be reset.
+	 */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_STAT_REG,
+		&reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	if ((reg_value & BATT_OVV) == BATT_OVV) {
+		if (!di->flags.bat_ovv) {
+			dev_dbg(di->dev, "Battery OVV\n");
+			di->flags.bat_ovv = true;
+			power_supply_changed(di->fg_psy);
+		}
+		/* Not yet recovered from ovv, reschedule this test */
+		queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
+				   HZ);
+		} else {
+			dev_dbg(di->dev, "Battery recovered from OVV\n");
+			di->flags.bat_ovv = false;
+			power_supply_changed(di->fg_psy);
+	}
+}
+
+/**
+ * ab8500_fg_low_bat_work() - Check LOW_BAT condition
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the LOW_BAT condition
+ */
+static void ab8500_fg_low_bat_work(struct work_struct *work)
+{
+	int vbat_uv;
+
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_low_bat_work.work);
+
+	vbat_uv = ab8500_fg_bat_voltage(di);
+
+	/* Check if LOW_BAT still fulfilled */
+	if (vbat_uv < di->bm->fg_params->lowbat_threshold_uv) {
+		/* Is it time to shut down? */
+		if (di->low_bat_cnt < 1) {
+			di->flags.low_bat = true;
+			dev_warn(di->dev, "Shut down pending...\n");
+		} else {
+			/*
+			* Else we need to re-schedule this check to be able to detect
+			* if the voltage increases again during charging or
+			* due to decreasing load.
+			*/
+			di->low_bat_cnt--;
+			dev_warn(di->dev, "Battery voltage still LOW\n");
+			queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+				round_jiffies(LOW_BAT_CHECK_INTERVAL));
+		}
+	} else {
+		di->flags.low_bat_delay = false;
+		di->low_bat_cnt = 10;
+		dev_warn(di->dev, "Battery voltage OK again\n");
+	}
+
+	/* This is needed to dispatch LOW_BAT */
+	ab8500_fg_check_capacity_limits(di, false);
+}
+
+/**
+ * ab8500_fg_battok_calc - calculate the bit pattern corresponding
+ * to the target voltage.
+ * @di:       pointer to the ab8500_fg structure
+ * @target:   target voltage
+ *
+ * Returns bit pattern closest to the target voltage
+ * valid return values are 0-14. (0-BATT_OK_MAX_NR_INCREMENTS)
+ */
+
+static int ab8500_fg_battok_calc(struct ab8500_fg *di, int target)
+{
+	if (target > BATT_OK_MIN +
+		(BATT_OK_INCREMENT * BATT_OK_MAX_NR_INCREMENTS))
+		return BATT_OK_MAX_NR_INCREMENTS;
+	if (target < BATT_OK_MIN)
+		return 0;
+	return (target - BATT_OK_MIN) / BATT_OK_INCREMENT;
+}
+
+/**
+ * ab8500_fg_battok_init_hw_register - init battok levels
+ * @di:       pointer to the ab8500_fg structure
+ *
+ */
+
+static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di)
+{
+	int selected;
+	int sel0;
+	int sel1;
+	int cbp_sel0;
+	int cbp_sel1;
+	int ret;
+	int new_val;
+
+	sel0 = di->bm->fg_params->battok_falling_th_sel0;
+	sel1 = di->bm->fg_params->battok_raising_th_sel1;
+
+	cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
+	cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
+
+	selected = BATT_OK_MIN + cbp_sel0 * BATT_OK_INCREMENT;
+
+	if (selected != sel0)
+		dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
+			sel0, selected, cbp_sel0);
+
+	selected = BATT_OK_MIN + cbp_sel1 * BATT_OK_INCREMENT;
+
+	if (selected != sel1)
+		dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
+			sel1, selected, cbp_sel1);
+
+	new_val = cbp_sel0 | (cbp_sel1 << 4);
+
+	dev_dbg(di->dev, "using: %x %d %d\n", new_val, cbp_sel0, cbp_sel1);
+	ret = abx500_set_register_interruptible(di->dev, AB8500_SYS_CTRL2_BLOCK,
+		AB8500_BATT_OK_REG, new_val);
+	return ret;
+}
+
+/**
+ * ab8500_fg_instant_work() - Run the FG state machine instantly
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for instant work
+ */
+static void ab8500_fg_instant_work(struct work_struct *work)
+{
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_work);
+
+	ab8500_fg_algorithm(di);
+}
+
+/**
+ * ab8500_fg_cc_data_end_handler() - end of data conversion isr.
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+	if (!di->nbr_cceoc_irq_cnt) {
+		di->nbr_cceoc_irq_cnt++;
+		complete(&di->ab8500_fg_started);
+	} else {
+		di->nbr_cceoc_irq_cnt = 0;
+		complete(&di->ab8500_fg_complete);
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_cc_int_calib_handler () - end of calibration isr.
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_int_calib_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+	di->calib_state = AB8500_FG_CALIB_END;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_cc_convend_handler() - isr to get battery avg current.
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_convend_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+
+	queue_work(di->fg_wq, &di->fg_acc_cur_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_batt_ovv_handler() - Battery OVV occured
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+
+	dev_dbg(di->dev, "Battery OVV\n");
+
+	/* Schedule a new HW failure check */
+	queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_lowbatf_handler() - Battery voltage is below LOW threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+
+	/* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */
+	if (!di->flags.low_bat_delay) {
+		dev_warn(di->dev, "Battery voltage is below LOW threshold\n");
+		di->flags.low_bat_delay = true;
+		/*
+		 * Start a timer to check LOW_BAT again after some time
+		 * This is done to avoid shutdown on single voltage dips
+		 */
+		queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+			round_jiffies(LOW_BAT_CHECK_INTERVAL));
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_get_property() - get the fg properties
+ * @psy:	pointer to the power_supply structure
+ * @psp:	pointer to the power_supply_property structure
+ * @val:	pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * fg properties by reading the sysfs files.
+ * voltage_now:		battery voltage
+ * current_now:		battery instant current
+ * current_avg:		battery average current
+ * charge_full_design:	capacity where battery is considered full
+ * charge_now:		battery capacity in nAh
+ * capacity:		capacity in percent
+ * capacity_level:	capacity level
+ *
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_fg_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	/*
+	 * If battery is identified as unknown and charging of unknown
+	 * batteries is disabled, we always report 100% capacity and
+	 * capacity level UNKNOWN, since we can't calculate
+	 * remaining capacity
+	 */
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (di->flags.bat_ovv)
+			val->intval = BATT_OVV_VALUE;
+		else
+			val->intval = di->vbat_uv;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = di->inst_curr_ua;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = di->avg_curr_ua;
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		val->intval = ab8500_fg_convert_mah_to_uwh(di,
+				di->bat_cap.max_mah_design);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+		val->intval = ab8500_fg_convert_mah_to_uwh(di,
+				di->bat_cap.max_mah);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = ab8500_fg_convert_mah_to_uwh(di,
+					di->bat_cap.max_mah);
+		else
+			val->intval = ab8500_fg_convert_mah_to_uwh(di,
+					di->bat_cap.prev_mah);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = di->bat_cap.max_mah_design;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = di->bat_cap.max_mah;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = di->bat_cap.max_mah;
+		else
+			val->intval = di->bat_cap.prev_mah;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = 100;
+		else
+			val->intval = di->bat_cap.prev_percent;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		else
+			val->intval = di->bat_cap.prev_level;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext = dev_get_drvdata(dev);
+	const char **supplicants = (const char **)ext->supplied_to;
+	struct ab8500_fg *di;
+	struct power_supply_battery_info *bi;
+	union power_supply_propval ret;
+	int j;
+
+	psy = (struct power_supply *)data;
+	di = power_supply_get_drvdata(psy);
+	bi = di->bm->bi;
+
+	/*
+	 * For all psy where the name of your driver
+	 * appears in any supplied_to
+	 */
+	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+	if (j < 0)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->desc->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->desc->properties[j];
+
+		if (power_supply_get_property(ext, prop, &ret))
+			continue;
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_STATUS:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				switch (ret.intval) {
+				case POWER_SUPPLY_STATUS_UNKNOWN:
+				case POWER_SUPPLY_STATUS_DISCHARGING:
+				case POWER_SUPPLY_STATUS_NOT_CHARGING:
+					if (!di->flags.charging)
+						break;
+					di->flags.charging = false;
+					di->flags.fully_charged = false;
+					if (di->bm->capacity_scaling)
+						ab8500_fg_update_cap_scalers(di);
+					queue_work(di->fg_wq, &di->fg_work);
+					break;
+				case POWER_SUPPLY_STATUS_FULL:
+					if (di->flags.fully_charged)
+						break;
+					di->flags.fully_charged = true;
+					di->flags.force_full = true;
+					/* Save current capacity as maximum */
+					di->bat_cap.max_mah = di->bat_cap.mah;
+					queue_work(di->fg_wq, &di->fg_work);
+					break;
+				case POWER_SUPPLY_STATUS_CHARGING:
+					if (di->flags.charging &&
+						!di->flags.fully_charged)
+						break;
+					di->flags.charging = true;
+					di->flags.fully_charged = false;
+					if (di->bm->capacity_scaling)
+						ab8500_fg_update_cap_scalers(di);
+					queue_work(di->fg_wq, &di->fg_work);
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+		case POWER_SUPPLY_PROP_TECHNOLOGY:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				if (!di->flags.batt_id_received &&
+				    (bi && (bi->technology !=
+					    POWER_SUPPLY_TECHNOLOGY_UNKNOWN))) {
+					di->flags.batt_id_received = true;
+
+					di->bat_cap.max_mah_design =
+						di->bm->bi->charge_full_design_uah;
+
+					di->bat_cap.max_mah =
+						di->bat_cap.max_mah_design;
+
+					di->vbat_nom_uv =
+						di->bm->bi->voltage_max_design_uv;
+				}
+
+				if (ret.intval)
+					di->flags.batt_unknown = false;
+				else
+					di->flags.batt_unknown = true;
+				break;
+			default:
+				break;
+			}
+			break;
+		case POWER_SUPPLY_PROP_TEMP:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				if (di->flags.batt_id_received)
+					di->bat_temp = ret.intval;
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_fg_init_hw_registers() - Set up FG related registers
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Set up battery OVV, low battery voltage registers
+ */
+static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
+{
+	int ret;
+
+	/*
+	 * Set VBAT OVV (overvoltage) threshold to 4.75V (typ) this is what
+	 * the hardware supports, nothing else can be configured in hardware.
+	 * See this as an "outer limit" where the charger will certainly
+	 * shut down. Other (lower) overvoltage levels need to be implemented
+	 * in software.
+	 */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_CHARGER,
+		AB8500_BATT_OVV,
+		BATT_OVV_TH_4P75,
+		BATT_OVV_TH_4P75);
+	if (ret) {
+		dev_err(di->dev, "failed to set BATT_OVV\n");
+		goto out;
+	}
+
+	/* Enable VBAT OVV detection */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_CHARGER,
+		AB8500_BATT_OVV,
+		BATT_OVV_ENA,
+		BATT_OVV_ENA);
+	if (ret) {
+		dev_err(di->dev, "failed to enable BATT_OVV\n");
+		goto out;
+	}
+
+	/* Low Battery Voltage */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_LOW_BAT_REG,
+		ab8500_volt_to_regval(
+			di->bm->fg_params->lowbat_threshold_uv) << 1 |
+		LOW_BAT_ENABLE);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		goto out;
+	}
+
+	/* Battery OK threshold */
+	ret = ab8500_fg_battok_init_hw_register(di);
+	if (ret) {
+		dev_err(di->dev, "BattOk init write failed.\n");
+		goto out;
+	}
+
+	if (is_ab8505(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
+			goto out;
+		}
+	}
+out:
+	return ret;
+}
+
+/**
+ * ab8500_fg_external_power_changed() - callback for power supply changes
+ * @psy:       pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void ab8500_fg_external_power_changed(struct power_supply *psy)
+{
+	class_for_each_device(power_supply_class, NULL, psy,
+			      ab8500_fg_get_ext_psy_data);
+}
+
+/**
+ * ab8500_fg_reinit_work() - work to reset the FG algorithm
+ * @work:	pointer to the work_struct structure
+ *
+ * Used to reset the current battery capacity to be able to
+ * retrigger a new voltage base capacity calculation. For
+ * test and verification purpose.
+ */
+static void ab8500_fg_reinit_work(struct work_struct *work)
+{
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_reinit_work.work);
+
+	if (!di->flags.calibrate) {
+		dev_dbg(di->dev, "Resetting FG state machine to init.\n");
+		ab8500_fg_clear_cap_samples(di);
+		ab8500_fg_calc_cap_discharge_voltage(di);
+		ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+		ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+	} else {
+		dev_err(di->dev, "Residual offset calibration ongoing "
+			"retrying..\n");
+		/* Wait one second until next try*/
+		queue_delayed_work(di->fg_wq, &di->fg_reinit_work,
+			round_jiffies(1));
+	}
+}
+
+/* Exposure to the sysfs interface */
+
+struct ab8500_fg_sysfs_entry {
+	struct attribute attr;
+	ssize_t (*show)(struct ab8500_fg *, char *);
+	ssize_t (*store)(struct ab8500_fg *, const char *, size_t);
+};
+
+static ssize_t charge_full_show(struct ab8500_fg *di, char *buf)
+{
+	return sprintf(buf, "%d\n", di->bat_cap.max_mah);
+}
+
+static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
+				 size_t count)
+{
+	unsigned long charge_full;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &charge_full);
+	if (ret)
+		return ret;
+
+	di->bat_cap.max_mah = (int) charge_full;
+	return count;
+}
+
+static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
+{
+	return sprintf(buf, "%d\n", di->bat_cap.prev_mah);
+}
+
+static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
+				 size_t count)
+{
+	unsigned long charge_now;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &charge_now);
+	if (ret)
+		return ret;
+
+	di->bat_cap.user_mah = (int) charge_now;
+	di->flags.user_cap = true;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	return count;
+}
+
+static struct ab8500_fg_sysfs_entry charge_full_attr =
+	__ATTR(charge_full, 0644, charge_full_show, charge_full_store);
+
+static struct ab8500_fg_sysfs_entry charge_now_attr =
+	__ATTR(charge_now, 0644, charge_now_show, charge_now_store);
+
+static ssize_t
+ab8500_fg_show(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+	struct ab8500_fg_sysfs_entry *entry;
+	struct ab8500_fg *di;
+
+	entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
+	di = container_of(kobj, struct ab8500_fg, fg_kobject);
+
+	if (!entry->show)
+		return -EIO;
+
+	return entry->show(di, buf);
+}
+static ssize_t
+ab8500_fg_store(struct kobject *kobj, struct attribute *attr, const char *buf,
+		size_t count)
+{
+	struct ab8500_fg_sysfs_entry *entry;
+	struct ab8500_fg *di;
+
+	entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
+	di = container_of(kobj, struct ab8500_fg, fg_kobject);
+
+	if (!entry->store)
+		return -EIO;
+
+	return entry->store(di, buf, count);
+}
+
+static const struct sysfs_ops ab8500_fg_sysfs_ops = {
+	.show = ab8500_fg_show,
+	.store = ab8500_fg_store,
+};
+
+static struct attribute *ab8500_fg_attrs[] = {
+	&charge_full_attr.attr,
+	&charge_now_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ab8500_fg);
+
+static struct kobj_type ab8500_fg_ktype = {
+	.sysfs_ops = &ab8500_fg_sysfs_ops,
+	.default_groups = ab8500_fg_groups,
+};
+
+/**
+ * ab8500_fg_sysfs_exit() - de-init of sysfs entry
+ * @di:                pointer to the struct ab8500_chargalg
+ *
+ * This function removes the entry in sysfs.
+ */
+static void ab8500_fg_sysfs_exit(struct ab8500_fg *di)
+{
+	kobject_del(&di->fg_kobject);
+}
+
+/**
+ * ab8500_fg_sysfs_init() - init of sysfs entry
+ * @di:                pointer to the struct ab8500_chargalg
+ *
+ * This function adds an entry in sysfs.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
+{
+	int ret = 0;
+
+	ret = kobject_init_and_add(&di->fg_kobject,
+		&ab8500_fg_ktype,
+		NULL, "battery");
+	if (ret < 0) {
+		kobject_put(&di->fg_kobject);
+		dev_err(di->dev, "failed to create sysfs entry\n");
+	}
+
+	return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_FLAG_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x7F) {
+		dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_maxtime_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_MAX_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+
+}
+
+static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x7F) {
+		dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_restart_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_restart_write(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0xF) {
+		dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
+
+fail:
+	return count;
+
+}
+
+static ssize_t ab8505_powercut_timer_read(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
+						    struct device_attribute *attr,
+						    char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4);
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_read(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+	if (ret < 0)
+		goto fail;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_write(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x1) {
+		dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_flag_read(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG,  &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_read(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_DEBOUNCE_REG,  &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_write(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x7) {
+		dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
+						  struct device_attribute *attr,
+						  char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5));
+
+fail:
+	return ret;
+}
+
+static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
+	__ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write),
+	__ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write),
+	__ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_restart_read, ab8505_powercut_restart_write),
+	__ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL),
+	__ATTR(powercut_restart_counter, S_IRUGO,
+		ab8505_powercut_restart_counter_read, NULL),
+	__ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_read, ab8505_powercut_write),
+	__ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL),
+	__ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_debounce_read, ab8505_powercut_debounce_write),
+	__ATTR(powercut_enable_status, S_IRUGO,
+		ab8505_powercut_enable_status_read, NULL),
+};
+
+static int ab8500_fg_sysfs_psy_create_attrs(struct ab8500_fg *di)
+{
+	unsigned int i;
+
+	if (is_ab8505(di->parent)) {
+		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+			if (device_create_file(&di->fg_psy->dev,
+					       &ab8505_fg_sysfs_psy_attrs[i]))
+				goto sysfs_psy_create_attrs_failed_ab8505;
+	}
+	return 0;
+sysfs_psy_create_attrs_failed_ab8505:
+	dev_err(&di->fg_psy->dev, "Failed creating sysfs psy attrs for ab8505.\n");
+	while (i--)
+		device_remove_file(&di->fg_psy->dev,
+				   &ab8505_fg_sysfs_psy_attrs[i]);
+
+	return -EIO;
+}
+
+static void ab8500_fg_sysfs_psy_remove_attrs(struct ab8500_fg *di)
+{
+	unsigned int i;
+
+	if (is_ab8505(di->parent)) {
+		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+			(void)device_remove_file(&di->fg_psy->dev,
+						 &ab8505_fg_sysfs_psy_attrs[i]);
+	}
+}
+
+/* Exposure to the sysfs interface <<END>> */
+
+static int __maybe_unused ab8500_fg_resume(struct device *dev)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	/*
+	 * Change state if we're not charging. If we're charging we will wake
+	 * up on the FG IRQ
+	 */
+	if (!di->flags.charging) {
+		ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_WAKEUP);
+		queue_work(di->fg_wq, &di->fg_work);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused ab8500_fg_suspend(struct device *dev)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	flush_delayed_work(&di->fg_periodic_work);
+	flush_work(&di->fg_work);
+	flush_work(&di->fg_acc_cur_work);
+	flush_delayed_work(&di->fg_reinit_work);
+	flush_delayed_work(&di->fg_low_bat_work);
+	flush_delayed_work(&di->fg_check_hw_failure_work);
+
+	/*
+	 * If the FG is enabled we will disable it before going to suspend
+	 * only if we're not charging
+	 */
+	if (di->flags.fg_enabled && !di->flags.charging)
+		ab8500_fg_coulomb_counter(di, false);
+
+	return 0;
+}
+
+/* ab8500 fg driver interrupts and their respective isr */
+static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
+	{"NCONV_ACCU", ab8500_fg_cc_convend_handler},
+	{"BATT_OVV", ab8500_fg_batt_ovv_handler},
+	{"LOW_BAT_F", ab8500_fg_lowbatf_handler},
+	{"CC_INT_CALIB", ab8500_fg_cc_int_calib_handler},
+	{"CCEOC", ab8500_fg_cc_data_end_handler},
+};
+
+static char *supply_interface[] = {
+	"ab8500_chargalg",
+	"ab8500_usb",
+};
+
+static const struct power_supply_desc ab8500_fg_desc = {
+	.name			= "ab8500_fg",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= ab8500_fg_props,
+	.num_properties		= ARRAY_SIZE(ab8500_fg_props),
+	.get_property		= ab8500_fg_get_property,
+	.external_power_changed	= ab8500_fg_external_power_changed,
+};
+
+static int ab8500_fg_bind(struct device *dev, struct device *master,
+			  void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	di->bat_cap.max_mah_design = di->bm->bi->charge_full_design_uah;
+	di->bat_cap.max_mah = di->bat_cap.max_mah_design;
+	di->vbat_nom_uv = di->bm->bi->voltage_max_design_uv;
+
+	/* Start the coulomb counter */
+	ab8500_fg_coulomb_counter(di, true);
+	/* Run the FG algorithm */
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+	return 0;
+}
+
+static void ab8500_fg_unbind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+	int ret;
+
+	/* Disable coulomb counter */
+	ret = ab8500_fg_coulomb_counter(di, false);
+	if (ret)
+		dev_err(dev, "failed to disable coulomb counter\n");
+
+	flush_workqueue(di->fg_wq);
+}
+
+static const struct component_ops ab8500_fg_component_ops = {
+	.bind = ab8500_fg_bind,
+	.unbind = ab8500_fg_unbind,
+};
+
+static int ab8500_fg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct power_supply_config psy_cfg = {};
+	struct ab8500_fg *di;
+	int i, irq;
+	int ret = 0;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->bm = &ab8500_bm_data;
+
+	mutex_init(&di->cc_lock);
+
+	/* get parent data */
+	di->dev = dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+
+	di->main_bat_v = devm_iio_channel_get(dev, "main_bat_v");
+	if (IS_ERR(di->main_bat_v)) {
+		ret = dev_err_probe(dev, PTR_ERR(di->main_bat_v),
+				    "failed to get main battery ADC channel\n");
+		return ret;
+	}
+
+	if (!of_property_read_u32(dev->of_node, "line-impedance-micro-ohms",
+				  &di->line_impedance_uohm))
+		dev_info(dev, "line impedance: %u uOhm\n",
+			 di->line_impedance_uohm);
+
+	psy_cfg.supplied_to = supply_interface;
+	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	psy_cfg.drv_data = di;
+
+	di->init_capacity = true;
+
+	ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+	ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
+
+	/* Create a work queue for running the FG algorithm */
+	di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
+	if (di->fg_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Init work for running the fg algorithm instantly */
+	INIT_WORK(&di->fg_work, ab8500_fg_instant_work);
+
+	/* Init work for getting the battery accumulated current */
+	INIT_WORK(&di->fg_acc_cur_work, ab8500_fg_acc_cur_work);
+
+	/* Init work for reinitialising the fg algorithm */
+	INIT_DEFERRABLE_WORK(&di->fg_reinit_work,
+		ab8500_fg_reinit_work);
+
+	/* Work delayed Queue to run the state machine */
+	INIT_DEFERRABLE_WORK(&di->fg_periodic_work,
+		ab8500_fg_periodic_work);
+
+	/* Work to check low battery condition */
+	INIT_DEFERRABLE_WORK(&di->fg_low_bat_work,
+		ab8500_fg_low_bat_work);
+
+	/* Init work for HW failure check */
+	INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work,
+		ab8500_fg_check_hw_failure_work);
+
+	/* Reset battery low voltage flag */
+	di->flags.low_bat = false;
+
+	/* Initialize low battery counter */
+	di->low_bat_cnt = 10;
+
+	/* Initialize OVV, and other registers */
+	ret = ab8500_fg_init_hw_registers(di);
+	if (ret) {
+		dev_err(dev, "failed to initialize registers\n");
+		destroy_workqueue(di->fg_wq);
+		return ret;
+	}
+
+	/* Consider battery unknown until we're informed otherwise */
+	di->flags.batt_unknown = true;
+	di->flags.batt_id_received = false;
+
+	/* Register FG power supply class */
+	di->fg_psy = devm_power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
+	if (IS_ERR(di->fg_psy)) {
+		dev_err(dev, "failed to register FG psy\n");
+		destroy_workqueue(di->fg_wq);
+		return PTR_ERR(di->fg_psy);
+	}
+
+	di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
+
+	/*
+	 * Initialize completion used to notify completion and start
+	 * of inst current
+	 */
+	init_completion(&di->ab8500_fg_started);
+	init_completion(&di->ab8500_fg_complete);
+
+	/* Register primary interrupt handlers */
+	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
+		if (irq < 0) {
+			destroy_workqueue(di->fg_wq);
+			return irq;
+		}
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+				  ab8500_fg_irq[i].isr,
+				  IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+				  ab8500_fg_irq[i].name, di);
+
+		if (ret != 0) {
+			dev_err(dev, "failed to request %s IRQ %d: %d\n",
+				ab8500_fg_irq[i].name, irq, ret);
+			destroy_workqueue(di->fg_wq);
+			return ret;
+		}
+		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
+			ab8500_fg_irq[i].name, irq, ret);
+	}
+
+	di->irq = platform_get_irq_byname(pdev, "CCEOC");
+	disable_irq(di->irq);
+	di->nbr_cceoc_irq_cnt = 0;
+
+	platform_set_drvdata(pdev, di);
+
+	ret = ab8500_fg_sysfs_init(di);
+	if (ret) {
+		dev_err(dev, "failed to create sysfs entry\n");
+		destroy_workqueue(di->fg_wq);
+		return ret;
+	}
+
+	ret = ab8500_fg_sysfs_psy_create_attrs(di);
+	if (ret) {
+		dev_err(dev, "failed to create FG psy\n");
+		ab8500_fg_sysfs_exit(di);
+		destroy_workqueue(di->fg_wq);
+		return ret;
+	}
+
+	/* Calibrate the fg first time */
+	di->flags.calibrate = true;
+	di->calib_state = AB8500_FG_CALIB_INIT;
+
+	/* Use room temp as default value until we get an update from driver. */
+	di->bat_temp = 210;
+
+	list_add_tail(&di->node, &ab8500_fg_list);
+
+	return component_add(dev, &ab8500_fg_component_ops);
+}
+
+static int ab8500_fg_remove(struct platform_device *pdev)
+{
+	struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+	destroy_workqueue(di->fg_wq);
+	component_del(&pdev->dev, &ab8500_fg_component_ops);
+	list_del(&di->node);
+	ab8500_fg_sysfs_exit(di);
+	ab8500_fg_sysfs_psy_remove_attrs(di);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_fg_pm_ops, ab8500_fg_suspend, ab8500_fg_resume);
+
+static const struct of_device_id ab8500_fg_match[] = {
+	{ .compatible = "stericsson,ab8500-fg", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ab8500_fg_match);
+
+struct platform_driver ab8500_fg_driver = {
+	.probe = ab8500_fg_probe,
+	.remove = ab8500_fg_remove,
+	.driver = {
+		.name = "ab8500-fg",
+		.of_match_table = ab8500_fg_match,
+		.pm = &ab8500_fg_pm_ops,
+	},
+};
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:ab8500-fg");
+MODULE_DESCRIPTION("AB8500 Fuel Gauge driver");