Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 529 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
new file mode 100644
index 000000000..f59bb81f2
--- /dev/null
+++ b/drivers/rtc/rtc-fm3130.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
+ *
+ *  Copyright (C) 2008 Sergey Lapin
+ *  Based on ds1307 driver by James Chapman and David Brownell
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+#define FM3130_RTC_CONTROL	(0x0)
+#define FM3130_CAL_CONTROL	(0x1)
+#define FM3130_RTC_SECONDS	(0x2)
+#define FM3130_RTC_MINUTES	(0x3)
+#define FM3130_RTC_HOURS	(0x4)
+#define FM3130_RTC_DAY		(0x5)
+#define FM3130_RTC_DATE		(0x6)
+#define FM3130_RTC_MONTHS	(0x7)
+#define FM3130_RTC_YEARS	(0x8)
+
+#define FM3130_ALARM_SECONDS	(0x9)
+#define FM3130_ALARM_MINUTES	(0xa)
+#define FM3130_ALARM_HOURS	(0xb)
+#define FM3130_ALARM_DATE	(0xc)
+#define FM3130_ALARM_MONTHS	(0xd)
+#define FM3130_ALARM_WP_CONTROL	(0xe)
+
+#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
+#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
+#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
+#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
+#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
+#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
+#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
+#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
+#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
+
+#define FM3130_CLOCK_REGS 7
+#define FM3130_ALARM_REGS 5
+
+struct fm3130 {
+	u8			reg_addr_time;
+	u8			reg_addr_alarm;
+	u8			regs[15];
+	struct i2c_msg		msg[4];
+	struct i2c_client	*client;
+	struct rtc_device	*rtc;
+	int			alarm_valid;
+	int			data_valid;
+};
+static const struct i2c_device_id fm3130_id[] = {
+	{ "fm3130", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fm3130_id);
+
+#define FM3130_MODE_NORMAL		0
+#define FM3130_MODE_WRITE		1
+#define FM3130_MODE_READ		2
+
+static void fm3130_rtc_mode(struct device *dev, int mode)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+	switch (mode) {
+	case FM3130_MODE_NORMAL:
+		fm3130->regs[FM3130_RTC_CONTROL] &=
+			~(FM3130_RTC_CONTROL_BIT_WRITE |
+			FM3130_RTC_CONTROL_BIT_READ);
+		break;
+	case FM3130_MODE_WRITE:
+		fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
+		break;
+	case FM3130_MODE_READ:
+		fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
+		break;
+	default:
+		dev_dbg(dev, "invalid mode %d\n", mode);
+		break;
+	}
+
+	i2c_smbus_write_byte_data(fm3130->client,
+		 FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
+}
+
+static int fm3130_get_time(struct device *dev, struct rtc_time *t)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int		tmp;
+
+	if (!fm3130->data_valid) {
+		/* We have invalid data in RTC, probably due
+		to battery faults or other problems. Return EIO
+		for now, it will allow us to set data later instead
+		of error during probing which disables device */
+		return -EIO;
+	}
+	fm3130_rtc_mode(dev, FM3130_MODE_READ);
+
+	/* read the RTC date and time registers all at once */
+	tmp = i2c_transfer(fm3130->client->adapter, fm3130->msg, 2);
+	if (tmp != 2) {
+		dev_err(dev, "%s error %d\n", "read", tmp);
+		return -EIO;
+	}
+
+	fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+	dev_dbg(dev, "%s: %15ph\n", "read", fm3130->regs);
+
+	t->tm_sec = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+	t->tm_min = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+	tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
+	t->tm_hour = bcd2bin(tmp);
+	t->tm_wday = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
+	t->tm_mday = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+	tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
+	t->tm_mon = bcd2bin(tmp) - 1;
+
+	/* assume 20YY not 19YY, and ignore CF bit */
+	t->tm_year = bcd2bin(fm3130->regs[FM3130_RTC_YEARS]) + 100;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", t->tm_sec, t->tm_min,
+		t->tm_hour, t->tm_mday,
+		t->tm_mon, t->tm_year, t->tm_wday);
+
+	return 0;
+}
+
+
+static int fm3130_set_time(struct device *dev, struct rtc_time *t)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int		tmp, i;
+	u8		*buf = fm3130->regs;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", t->tm_sec, t->tm_min,
+		t->tm_hour, t->tm_mday,
+		t->tm_mon, t->tm_year, t->tm_wday);
+
+	/* first register addr */
+	buf[FM3130_RTC_SECONDS] = bin2bcd(t->tm_sec);
+	buf[FM3130_RTC_MINUTES] = bin2bcd(t->tm_min);
+	buf[FM3130_RTC_HOURS] = bin2bcd(t->tm_hour);
+	buf[FM3130_RTC_DAY] = bin2bcd(t->tm_wday + 1);
+	buf[FM3130_RTC_DATE] = bin2bcd(t->tm_mday);
+	buf[FM3130_RTC_MONTHS] = bin2bcd(t->tm_mon + 1);
+
+	/* assume 20YY not 19YY */
+	tmp = t->tm_year - 100;
+	buf[FM3130_RTC_YEARS] = bin2bcd(tmp);
+
+	dev_dbg(dev, "%s: %15ph\n", "write", buf);
+
+	fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
+
+	/* Writing time registers, we don't support multibyte transfers */
+	for (i = 0; i < FM3130_CLOCK_REGS; i++) {
+		i2c_smbus_write_byte_data(fm3130->client,
+					FM3130_RTC_SECONDS + i,
+					fm3130->regs[FM3130_RTC_SECONDS + i]);
+	}
+
+	fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+	/* We assume here that data are valid once written */
+	if (!fm3130->data_valid)
+		fm3130->data_valid = 1;
+	return 0;
+}
+
+static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int tmp;
+	struct rtc_time *tm = &alrm->time;
+
+	if (!fm3130->alarm_valid) {
+		/*
+		 * We have invalid alarm in RTC, probably due to battery faults
+		 * or other problems. Return EIO for now, it will allow us to
+		 * set alarm value later instead of error during probing which
+		 * disables device
+		 */
+		return -EIO;
+	}
+
+	/* read the RTC alarm registers all at once */
+	tmp = i2c_transfer(fm3130->client->adapter, &fm3130->msg[2], 2);
+	if (tmp != 2) {
+		dev_err(dev, "%s error %d\n", "read", tmp);
+		return -EIO;
+	}
+	dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
+			fm3130->regs[FM3130_ALARM_SECONDS],
+			fm3130->regs[FM3130_ALARM_MINUTES],
+			fm3130->regs[FM3130_ALARM_HOURS],
+			fm3130->regs[FM3130_ALARM_DATE],
+			fm3130->regs[FM3130_ALARM_MONTHS]);
+
+	tm->tm_sec	= bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
+	tm->tm_min	= bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
+	tm->tm_hour	= bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
+	tm->tm_mday	= bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
+	tm->tm_mon	= bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+
+	if (tm->tm_mon > 0)
+		tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read alarm", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* check if alarm enabled */
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+	if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) &&
+		(~fm3130->regs[FM3130_RTC_CONTROL] &
+			FM3130_RTC_CONTROL_BIT_CAL)) {
+		alrm->enabled = 1;
+	}
+
+	return 0;
+}
+
+static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	int i;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write alarm", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	fm3130->regs[FM3130_ALARM_SECONDS] =
+		(tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_MINUTES] =
+		(tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_HOURS] =
+		(tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_DATE] =
+		(tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_MONTHS] =
+		(tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80;
+
+	dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
+			fm3130->regs[FM3130_ALARM_SECONDS],
+			fm3130->regs[FM3130_ALARM_MINUTES],
+			fm3130->regs[FM3130_ALARM_HOURS],
+			fm3130->regs[FM3130_ALARM_DATE],
+			fm3130->regs[FM3130_ALARM_MONTHS]);
+	/* Writing time registers, we don't support multibyte transfers */
+	for (i = 0; i < FM3130_ALARM_REGS; i++) {
+		i2c_smbus_write_byte_data(fm3130->client,
+					FM3130_ALARM_SECONDS + i,
+					fm3130->regs[FM3130_ALARM_SECONDS + i]);
+	}
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+	/* enable or disable alarm */
+	if (alrm->enabled) {
+		i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+			(fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL)) |
+					FM3130_RTC_CONTROL_BIT_AEN);
+	} else {
+		i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL) &
+					~(FM3130_RTC_CONTROL_BIT_AEN));
+	}
+
+	/* We assume here that data is valid once written */
+	if (!fm3130->alarm_valid)
+		fm3130->alarm_valid = 1;
+
+	return 0;
+}
+
+static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+	dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n",
+		enabled, fm3130->regs[FM3130_RTC_CONTROL]);
+
+	switch (enabled) {
+	case 0:		/* alarm off */
+		ret = i2c_smbus_write_byte_data(fm3130->client,
+			FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL) &
+					~(FM3130_RTC_CONTROL_BIT_AEN));
+		break;
+	case 1:		/* alarm on */
+		ret = i2c_smbus_write_byte_data(fm3130->client,
+			FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL)) |
+					FM3130_RTC_CONTROL_BIT_AEN);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops fm3130_rtc_ops = {
+	.read_time	= fm3130_get_time,
+	.set_time	= fm3130_set_time,
+	.read_alarm	= fm3130_read_alarm,
+	.set_alarm	= fm3130_set_alarm,
+	.alarm_irq_enable = fm3130_alarm_irq_enable,
+};
+
+static struct i2c_driver fm3130_driver;
+
+static int fm3130_probe(struct i2c_client *client)
+{
+	struct fm3130		*fm3130;
+	int			err = -ENODEV;
+	int			tmp;
+	struct i2c_adapter	*adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter,
+			I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -EIO;
+
+	fm3130 = devm_kzalloc(&client->dev, sizeof(struct fm3130), GFP_KERNEL);
+
+	if (!fm3130)
+		return -ENOMEM;
+
+	fm3130->client = client;
+	i2c_set_clientdata(client, fm3130);
+	fm3130->reg_addr_time = FM3130_RTC_SECONDS;
+	fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
+
+	/* Messages to read time */
+	fm3130->msg[0].addr = client->addr;
+	fm3130->msg[0].flags = 0;
+	fm3130->msg[0].len = 1;
+	fm3130->msg[0].buf = &fm3130->reg_addr_time;
+
+	fm3130->msg[1].addr = client->addr;
+	fm3130->msg[1].flags = I2C_M_RD;
+	fm3130->msg[1].len = FM3130_CLOCK_REGS;
+	fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
+
+	/* Messages to read alarm */
+	fm3130->msg[2].addr = client->addr;
+	fm3130->msg[2].flags = 0;
+	fm3130->msg[2].len = 1;
+	fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
+
+	fm3130->msg[3].addr = client->addr;
+	fm3130->msg[3].flags = I2C_M_RD;
+	fm3130->msg[3].len = FM3130_ALARM_REGS;
+	fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+
+	fm3130->alarm_valid = 0;
+	fm3130->data_valid = 0;
+
+	tmp = i2c_transfer(adapter, fm3130->msg, 4);
+	if (tmp != 4) {
+		dev_dbg(&client->dev, "read error %d\n", tmp);
+		err = -EIO;
+		goto exit_free;
+	}
+
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
+	fm3130->regs[FM3130_CAL_CONTROL] =
+		i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
+
+	/* Disabling calibration mode */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL));
+		dev_warn(&client->dev, "Disabling calibration mode!\n");
+	}
+
+	/* Disabling read and write modes */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
+	    fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_READ |
+					FM3130_RTC_CONTROL_BIT_WRITE));
+		dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+	}
+
+	/* oscillator off?  turn it on, so clock can tick. */
+	if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
+		i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
+			fm3130->regs[FM3130_CAL_CONTROL] &
+				~(FM3130_CAL_CONTROL_BIT_nOSCEN));
+
+	/* low battery?  clear flag, and warn */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_LB));
+		dev_warn(&client->dev, "Low battery!\n");
+	}
+
+	/* check if Power On Reset bit is set */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~FM3130_RTC_CONTROL_BIT_POR);
+		dev_dbg(&client->dev, "POR bit is set\n");
+	}
+	/* ACS is controlled by alarm */
+	i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
+
+	/* alarm registers sanity check */
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+	if (tmp > 59)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+	if (tmp > 59)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+	if (tmp > 23)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+	if (tmp == 0 || tmp > 31)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+	if (tmp == 0 || tmp > 12)
+		goto bad_alarm;
+
+	fm3130->alarm_valid = 1;
+
+bad_alarm:
+
+	/* clock registers sanity chek */
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+	if (tmp > 59)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+	if (tmp > 59)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+	if (tmp > 23)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7);
+	if (tmp == 0 || tmp > 7)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+	if (tmp == 0 || tmp > 31)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+	if (tmp == 0 || tmp > 12)
+		goto bad_clock;
+
+	fm3130->data_valid = 1;
+
+bad_clock:
+
+	if (!fm3130->data_valid || !fm3130->alarm_valid)
+		dev_dbg(&client->dev, "%s: %15ph\n", "bogus registers",
+			fm3130->regs);
+
+	/* We won't bail out here because we just got invalid data.
+	   Time setting from u-boot doesn't work anyway */
+	fm3130->rtc = devm_rtc_device_register(&client->dev, client->name,
+				&fm3130_rtc_ops, THIS_MODULE);
+	if (IS_ERR(fm3130->rtc)) {
+		err = PTR_ERR(fm3130->rtc);
+		dev_err(&client->dev,
+			"unable to register the class device\n");
+		goto exit_free;
+	}
+	return 0;
+exit_free:
+	return err;
+}
+
+static struct i2c_driver fm3130_driver = {
+	.driver = {
+		.name	= "rtc-fm3130",
+	},
+	.probe_new	= fm3130_probe,
+	.id_table	= fm3130_id,
+};
+
+module_i2c_driver(fm3130_driver);
+
+MODULE_DESCRIPTION("RTC driver for FM3130");
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_LICENSE("GPL");
+