diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/scsi/qla1280.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | drivers/scsi/qla1280.c | 4388 |
1 files changed, 4388 insertions, 0 deletions
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c new file mode 100644 index 000000000..1e7f4d138 --- /dev/null +++ b/drivers/scsi/qla1280.c @@ -0,0 +1,4388 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/****************************************************************************** +* QLOGIC LINUX SOFTWARE +* +* QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver +* Copyright (C) 2000 Qlogic Corporation (www.qlogic.com) +* Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc. +* Copyright (C) 2003-2004 Christoph Hellwig +* +******************************************************************************/ +#define QLA1280_VERSION "3.27.1" +/***************************************************************************** + Revision History: + Rev 3.27.1, February 8, 2010, Michael Reed + - Retain firmware image for error recovery. + Rev 3.27, February 10, 2009, Michael Reed + - General code cleanup. + - Improve error recovery. + Rev 3.26, January 16, 2006 Jes Sorensen + - Ditch all < 2.6 support + Rev 3.25.1, February 10, 2005 Christoph Hellwig + - use pci_map_single to map non-S/G requests + - remove qla1280_proc_info + Rev 3.25, September 28, 2004, Christoph Hellwig + - add support for ISP1020/1040 + - don't include "scsi.h" anymore for 2.6.x + Rev 3.24.4 June 7, 2004 Christoph Hellwig + - restructure firmware loading, cleanup initialization code + - prepare support for ISP1020/1040 chips + Rev 3.24.3 January 19, 2004, Jes Sorensen + - Handle PCI DMA mask settings correctly + - Correct order of error handling in probe_one, free_irq should not + be called if request_irq failed + Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez + - Big endian fixes (James) + - Remove bogus IOCB content on zero data transfer commands (Andrew) + Rev 3.24.1 January 5, 2004, Jes Sorensen + - Initialize completion queue to avoid OOPS on probe + - Handle interrupts during mailbox testing + Rev 3.24 November 17, 2003, Christoph Hellwig + - use struct list_head for completion queue + - avoid old Scsi_FOO typedefs + - cleanup 2.4 compat glue a bit + - use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h" + - make initialization for memory mapped vs port I/O more similar + - remove broken pci config space manipulation + - kill more cruft + - this is an almost perfect 2.6 scsi driver now! ;) + Rev 3.23.39 December 17, 2003, Jes Sorensen + - Delete completion queue from srb if mailbox command failed to + to avoid qla1280_done completeting qla1280_error_action's + obsolete context + - Reduce arguments for qla1280_done + Rev 3.23.38 October 18, 2003, Christoph Hellwig + - Convert to new-style hotplugable driver for 2.6 + - Fix missing scsi_unregister/scsi_host_put on HBA removal + - Kill some more cruft + Rev 3.23.37 October 1, 2003, Jes Sorensen + - Make MMIO depend on CONFIG_X86_VISWS instead of yet another + random CONFIG option + - Clean up locking in probe path + Rev 3.23.36 October 1, 2003, Christoph Hellwig + - queuecommand only ever receives new commands - clear flags + - Reintegrate lost fixes from Linux 2.5 + Rev 3.23.35 August 14, 2003, Jes Sorensen + - Build against 2.6 + Rev 3.23.34 July 23, 2003, Jes Sorensen + - Remove pointless TRUE/FALSE macros + - Clean up vchan handling + Rev 3.23.33 July 3, 2003, Jes Sorensen + - Don't define register access macros before define determining MMIO. + This just happened to work out on ia64 but not elsewhere. + - Don't try and read from the card while it is in reset as + it won't respond and causes an MCA + Rev 3.23.32 June 23, 2003, Jes Sorensen + - Basic support for boot time arguments + Rev 3.23.31 June 8, 2003, Jes Sorensen + - Reduce boot time messages + Rev 3.23.30 June 6, 2003, Jes Sorensen + - Do not enable sync/wide/ppr before it has been determined + that the target device actually supports it + - Enable DMA arbitration for multi channel controllers + Rev 3.23.29 June 3, 2003, Jes Sorensen + - Port to 2.5.69 + Rev 3.23.28 June 3, 2003, Jes Sorensen + - Eliminate duplicate marker commands on bus resets + - Handle outstanding commands appropriately on bus/device resets + Rev 3.23.27 May 28, 2003, Jes Sorensen + - Remove bogus input queue code, let the Linux SCSI layer do the work + - Clean up NVRAM handling, only read it once from the card + - Add a number of missing default nvram parameters + Rev 3.23.26 Beta May 28, 2003, Jes Sorensen + - Use completion queue for mailbox commands instead of busy wait + Rev 3.23.25 Beta May 27, 2003, James Bottomley + - Migrate to use new error handling code + Rev 3.23.24 Beta May 21, 2003, James Bottomley + - Big endian support + - Cleanup data direction code + Rev 3.23.23 Beta May 12, 2003, Jes Sorensen + - Switch to using MMIO instead of PIO + Rev 3.23.22 Beta April 15, 2003, Jes Sorensen + - Fix PCI parity problem with 12160 during reset. + Rev 3.23.21 Beta April 14, 2003, Jes Sorensen + - Use pci_map_page()/pci_unmap_page() instead of map_single version. + Rev 3.23.20 Beta April 9, 2003, Jes Sorensen + - Remove < 2.4.x support + - Introduce HOST_LOCK to make the spin lock changes portable. + - Remove a bunch of idiotic and unnecessary typedef's + - Kill all leftovers of target-mode support which never worked anyway + Rev 3.23.19 Beta April 11, 2002, Linus Torvalds + - Do qla1280_pci_config() before calling request_irq() and + request_region() + - Use pci_dma_hi32() to handle upper word of DMA addresses instead + of large shifts + - Hand correct arguments to free_irq() in case of failure + Rev 3.23.18 Beta April 11, 2002, Jes Sorensen + - Run source through Lindent and clean up the output + Rev 3.23.17 Beta April 11, 2002, Jes Sorensen + - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32 + Rev 3.23.16 Beta March 19, 2002, Jes Sorensen + - Rely on mailbox commands generating interrupts - do not + run qla1280_isr() from ql1280_mailbox_command() + - Remove device_reg_t + - Integrate ql12160_set_target_parameters() with 1280 version + - Make qla1280_setup() non static + - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request + sent to the card - this command pauses the firmware!!! + Rev 3.23.15 Beta March 19, 2002, Jes Sorensen + - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions + - Remove a pile of pointless and confusing (srb_t **) and + (scsi_lu_t *) typecasts + - Explicit mark that we do not use the new error handling (for now) + - Remove scsi_qla_host_t and use 'struct' instead + - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled, + pci_64bit_slot flags which weren't used for anything anyway + - Grab host->host_lock while calling qla1280_isr() from abort() + - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we + do not need to save/restore flags in the interrupt handler + - Enable interrupts early (before any mailbox access) in preparation + for cleaning up the mailbox handling + Rev 3.23.14 Beta March 14, 2002, Jes Sorensen + - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace + it with proper use of dprintk(). + - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take + a debug level argument to determine if data is to be printed + - Add KERN_* info to printk() + Rev 3.23.13 Beta March 14, 2002, Jes Sorensen + - Significant cosmetic cleanups + - Change debug code to use dprintk() and remove #if mess + Rev 3.23.12 Beta March 13, 2002, Jes Sorensen + - More cosmetic cleanups, fix places treating return as function + - use cpu_relax() in qla1280_debounce_register() + Rev 3.23.11 Beta March 13, 2002, Jes Sorensen + - Make it compile under 2.5.5 + Rev 3.23.10 Beta October 1, 2001, Jes Sorensen + - Do no typecast short * to long * in QL1280BoardTbl, this + broke miserably on big endian boxes + Rev 3.23.9 Beta September 30, 2001, Jes Sorensen + - Remove pre 2.2 hack for checking for reentrance in interrupt handler + - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32 + unsigned int to match the types from struct scsi_cmnd + Rev 3.23.8 Beta September 29, 2001, Jes Sorensen + - Remove bogus timer_t typedef from qla1280.h + - Remove obsolete pre 2.2 PCI setup code, use proper #define's + for PCI_ values, call pci_set_master() + - Fix memleak of qla1280_buffer on module unload + - Only compile module parsing code #ifdef MODULE - should be + changed to use individual MODULE_PARM's later + - Remove dummy_buffer that was never modified nor printed + - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove + #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls + - Remove \r from print statements, this is Linux, not DOS + - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK} + dummy macros + - Remove C++ compile hack in header file as Linux driver are not + supposed to be compiled as C++ + - Kill MS_64BITS macro as it makes the code more readable + - Remove unnecessary flags.in_interrupts bit + Rev 3.23.7 Beta August 20, 2001, Jes Sorensen + - Dont' check for set flags on q->q_flag one by one in qla1280_next() + - Check whether the interrupt was generated by the QLA1280 before + doing any processing + - qla1280_status_entry(): Only zero out part of sense_buffer that + is not being copied into + - Remove more superflouous typecasts + - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy() + Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel + - Don't walk the entire list in qla1280_putq_t() just to directly + grab the pointer to the last element afterwards + Rev 3.23.5 Beta August 9, 2001, Jes Sorensen + - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver + Rev 3.23.4 Beta August 8, 2001, Jes Sorensen + - Set dev->max_sectors to 1024 + Rev 3.23.3 Beta August 6, 2001, Jes Sorensen + - Provide compat macros for pci_enable_device(), pci_find_subsys() + and scsi_set_pci_device() + - Call scsi_set_pci_device() for all devices + - Reduce size of kernel version dependent device probe code + - Move duplicate probe/init code to separate function + - Handle error if qla1280_mem_alloc() fails + - Kill OFFSET() macro and use Linux's PCI definitions instead + - Kill private structure defining PCI config space (struct config_reg) + - Only allocate I/O port region if not in MMIO mode + - Remove duplicate (unused) sanity check of sife of srb_t + Rev 3.23.2 Beta August 6, 2001, Jes Sorensen + - Change home-brew memset() implementations to use memset() + - Remove all references to COMTRACE() - accessing a PC's COM2 serial + port directly is not legal under Linux. + Rev 3.23.1 Beta April 24, 2001, Jes Sorensen + - Remove pre 2.2 kernel support + - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat) + - Fix MMIO access to use readl/writel instead of directly + dereferencing pointers + - Nuke MSDOS debugging code + - Change true/false data types to int from uint8_t + - Use int for counters instead of uint8_t etc. + - Clean up size & byte order conversion macro usage + Rev 3.23 Beta January 11, 2001 BN Qlogic + - Added check of device_id when handling non + QLA12160s during detect(). + Rev 3.22 Beta January 5, 2001 BN Qlogic + - Changed queue_task() to schedule_task() + for kernels 2.4.0 and higher. + Note: 2.4.0-testxx kernels released prior to + the actual 2.4.0 kernel release on January 2001 + will get compile/link errors with schedule_task(). + Please update your kernel to released 2.4.0 level, + or comment lines in this file flagged with 3.22 + to resolve compile/link error of schedule_task(). + - Added -DCONFIG_SMP in addition to -D__SMP__ + in Makefile for 2.4.0 builds of driver as module. + Rev 3.21 Beta January 4, 2001 BN Qlogic + - Changed criteria of 64/32 Bit mode of HBA + operation according to BITS_PER_LONG rather + than HBA's NVRAM setting of >4Gig memory bit; + so that the HBA auto-configures without the need + to setup each system individually. + Rev 3.20 Beta December 5, 2000 BN Qlogic + - Added priority handling to IA-64 onboard SCSI + ISP12160 chip for kernels greater than 2.3.18. + - Added irqrestore for qla1280_intr_handler. + - Enabled /proc/scsi/qla1280 interface. + - Clear /proc/scsi/qla1280 counters in detect(). + Rev 3.19 Beta October 13, 2000 BN Qlogic + - Declare driver_template for new kernel + (2.4.0 and greater) scsi initialization scheme. + - Update /proc/scsi entry for 2.3.18 kernels and + above as qla1280 + Rev 3.18 Beta October 10, 2000 BN Qlogic + - Changed scan order of adapters to map + the QLA12160 followed by the QLA1280. + Rev 3.17 Beta September 18, 2000 BN Qlogic + - Removed warnings for 32 bit 2.4.x compiles + - Corrected declared size for request and response + DMA addresses that are kept in each ha + Rev. 3.16 Beta August 25, 2000 BN Qlogic + - Corrected 64 bit addressing issue on IA-64 + where the upper 32 bits were not properly + passed to the RISC engine. + Rev. 3.15 Beta August 22, 2000 BN Qlogic + - Modified qla1280_setup_chip to properly load + ISP firmware for greater that 4 Gig memory on IA-64 + Rev. 3.14 Beta August 16, 2000 BN Qlogic + - Added setting of dma_mask to full 64 bit + if flags.enable_64bit_addressing is set in NVRAM + Rev. 3.13 Beta August 16, 2000 BN Qlogic + - Use new PCI DMA mapping APIs for 2.4.x kernel + Rev. 3.12 July 18, 2000 Redhat & BN Qlogic + - Added check of pci_enable_device to detect() for 2.3.x + - Use pci_resource_start() instead of + pdev->resource[0].start in detect() for 2.3.x + - Updated driver version + Rev. 3.11 July 14, 2000 BN Qlogic + - Updated SCSI Firmware to following versions: + qla1x80: 8.13.08 + qla1x160: 10.04.08 + - Updated driver version to 3.11 + Rev. 3.10 June 23, 2000 BN Qlogic + - Added filtering of AMI SubSys Vendor ID devices + Rev. 3.9 + - DEBUG_QLA1280 undefined and new version BN Qlogic + Rev. 3.08b May 9, 2000 MD Dell + - Added logic to check against AMI subsystem vendor ID + Rev. 3.08 May 4, 2000 DG Qlogic + - Added logic to check for PCI subsystem ID. + Rev. 3.07 Apr 24, 2000 DG & BN Qlogic + - Updated SCSI Firmware to following versions: + qla12160: 10.01.19 + qla1280: 8.09.00 + Rev. 3.06 Apr 12, 2000 DG & BN Qlogic + - Internal revision; not released + Rev. 3.05 Mar 28, 2000 DG & BN Qlogic + - Edit correction for virt_to_bus and PROC. + Rev. 3.04 Mar 28, 2000 DG & BN Qlogic + - Merge changes from ia64 port. + Rev. 3.03 Mar 28, 2000 BN Qlogic + - Increase version to reflect new code drop with compile fix + of issue with inclusion of linux/spinlock for 2.3 kernels + Rev. 3.02 Mar 15, 2000 BN Qlogic + - Merge qla1280_proc_info from 2.10 code base + Rev. 3.01 Feb 10, 2000 BN Qlogic + - Corrected code to compile on a 2.2.x kernel. + Rev. 3.00 Jan 17, 2000 DG Qlogic + - Added 64-bit support. + Rev. 2.07 Nov 9, 1999 DG Qlogic + - Added new routine to set target parameters for ISP12160. + Rev. 2.06 Sept 10, 1999 DG Qlogic + - Added support for ISP12160 Ultra 3 chip. + Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont + - Modified code to remove errors generated when compiling with + Cygnus IA64 Compiler. + - Changed conversion of pointers to unsigned longs instead of integers. + - Changed type of I/O port variables from uint32_t to unsigned long. + - Modified OFFSET macro to work with 64-bit as well as 32-bit. + - Changed sprintf and printk format specifiers for pointers to %p. + - Changed some int to long type casts where needed in sprintf & printk. + - Added l modifiers to sprintf and printk format specifiers for longs. + - Removed unused local variables. + Rev. 1.20 June 8, 1999 DG, Qlogic + Changes to support RedHat release 6.0 (kernel 2.2.5). + - Added SCSI exclusive access lock (io_request_lock) when accessing + the adapter. + - Added changes for the new LINUX interface template. Some new error + handling routines have been added to the template, but for now we + will use the old ones. + - Initial Beta Release. +*****************************************************************************/ + + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/pci_ids.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/firmware.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <asm/processor.h> +#include <asm/types.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + + +/* + * Compile time Options: + * 0 - Disable and 1 - Enable + */ +#define DEBUG_QLA1280_INTR 0 +#define DEBUG_PRINT_NVRAM 0 +#define DEBUG_QLA1280 0 + +#define MEMORY_MAPPED_IO 1 + +#include "qla1280.h" + +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT +#define QLA_64BIT_PTR 1 +#endif + +#define NVRAM_DELAY() udelay(500) /* 2 microseconds */ + +#define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020) +#define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \ + ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240) +#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \ + ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160) + + +static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *); +static void qla1280_remove_one(struct pci_dev *); + +/* + * QLogic Driver Support Function Prototypes. + */ +static void qla1280_done(struct scsi_qla_host *); +static int qla1280_get_token(char *); +static int qla1280_setup(char *s) __init; + +/* + * QLogic ISP1280 Hardware Support Function Prototypes. + */ +static int qla1280_load_firmware(struct scsi_qla_host *); +static int qla1280_init_rings(struct scsi_qla_host *); +static int qla1280_nvram_config(struct scsi_qla_host *); +static int qla1280_mailbox_command(struct scsi_qla_host *, + uint8_t, uint16_t *); +static int qla1280_bus_reset(struct scsi_qla_host *, int); +static int qla1280_device_reset(struct scsi_qla_host *, int, int); +static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int); +static int qla1280_abort_isp(struct scsi_qla_host *); +#ifdef QLA_64BIT_PTR +static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *); +#else +static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *); +#endif +static void qla1280_nv_write(struct scsi_qla_host *, uint16_t); +static void qla1280_poll(struct scsi_qla_host *); +static void qla1280_reset_adapter(struct scsi_qla_host *); +static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8); +static void qla1280_isp_cmd(struct scsi_qla_host *); +static void qla1280_isr(struct scsi_qla_host *, struct list_head *); +static void qla1280_rst_aen(struct scsi_qla_host *); +static void qla1280_status_entry(struct scsi_qla_host *, struct response *, + struct list_head *); +static void qla1280_error_entry(struct scsi_qla_host *, struct response *, + struct list_head *); +static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t); +static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t); +static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *); +static request_t *qla1280_req_pkt(struct scsi_qla_host *); +static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *, + unsigned int); +static void qla1280_get_target_parameters(struct scsi_qla_host *, + struct scsi_device *); +static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int); + + +static struct qla_driver_setup driver_setup; + +/* + * convert scsi data direction to request_t control flags + */ +static inline uint16_t +qla1280_data_direction(struct scsi_cmnd *cmnd) +{ + switch(cmnd->sc_data_direction) { + case DMA_FROM_DEVICE: + return BIT_5; + case DMA_TO_DEVICE: + return BIT_6; + case DMA_BIDIRECTIONAL: + return BIT_5 | BIT_6; + /* + * We could BUG() on default here if one of the four cases aren't + * met, but then again if we receive something like that from the + * SCSI layer we have more serious problems. This shuts up GCC. + */ + case DMA_NONE: + default: + return 0; + } +} + +#if DEBUG_QLA1280 +static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd); +static void __qla1280_dump_buffer(char *, int); +#endif + + +/* + * insmod needs to find the variable and make it point to something + */ +#ifdef MODULE +static char *qla1280; + +/* insmod qla1280 options=verbose" */ +module_param(qla1280, charp, 0); +#else +__setup("qla1280=", qla1280_setup); +#endif + + +#define CMD_CDBLEN(Cmnd) Cmnd->cmd_len +#define CMD_CDBP(Cmnd) Cmnd->cmnd +#define CMD_SNSP(Cmnd) Cmnd->sense_buffer +#define CMD_SNSLEN(Cmnd) SCSI_SENSE_BUFFERSIZE +#define CMD_RESULT(Cmnd) Cmnd->result +#define CMD_HANDLE(Cmnd) Cmnd->host_scribble + +#define CMD_HOST(Cmnd) Cmnd->device->host +#define SCSI_BUS_32(Cmnd) Cmnd->device->channel +#define SCSI_TCN_32(Cmnd) Cmnd->device->id +#define SCSI_LUN_32(Cmnd) Cmnd->device->lun + + +/*****************************************/ +/* ISP Boards supported by this driver */ +/*****************************************/ + +struct qla_boards { + char *name; /* Board ID String */ + int numPorts; /* Number of SCSI ports */ + int fw_index; /* index into qla1280_fw_tbl for firmware */ +}; + +/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */ +static struct pci_device_id qla1280_pci_tbl[] = { + {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + {0,} +}; +MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl); + +static DEFINE_MUTEX(qla1280_firmware_mutex); + +struct qla_fw { + char *fwname; + const struct firmware *fw; +}; + +#define QL_NUM_FW_IMAGES 3 + +static struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = { + {"qlogic/1040.bin", NULL}, /* image 0 */ + {"qlogic/1280.bin", NULL}, /* image 1 */ + {"qlogic/12160.bin", NULL}, /* image 2 */ +}; + +/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */ +static struct qla_boards ql1280_board_tbl[] = { + {.name = "QLA12160", .numPorts = 2, .fw_index = 2}, + {.name = "QLA1040" , .numPorts = 1, .fw_index = 0}, + {.name = "QLA1080" , .numPorts = 1, .fw_index = 1}, + {.name = "QLA1240" , .numPorts = 2, .fw_index = 1}, + {.name = "QLA1280" , .numPorts = 2, .fw_index = 1}, + {.name = "QLA10160", .numPorts = 1, .fw_index = 2}, + {.name = " ", .numPorts = 0, .fw_index = -1}, +}; + +static int qla1280_verbose = 1; + +#if DEBUG_QLA1280 +static int ql_debug_level = 1; +#define dprintk(level, format, a...) \ + do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0) +#define qla1280_dump_buffer(level, buf, size) \ + if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size) +#define qla1280_print_scsi_cmd(level, cmd) \ + if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd) +#else +#define ql_debug_level 0 +#define dprintk(level, format, a...) do{}while(0) +#define qla1280_dump_buffer(a, b, c) do{}while(0) +#define qla1280_print_scsi_cmd(a, b) do{}while(0) +#endif + +#define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x); +#define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x); +#define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x); +#define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x); + + +static int qla1280_read_nvram(struct scsi_qla_host *ha) +{ + uint16_t *wptr; + uint8_t chksum; + int cnt, i; + struct nvram *nv; + + ENTER("qla1280_read_nvram"); + + if (driver_setup.no_nvram) + return 1; + + printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no); + + wptr = (uint16_t *)&ha->nvram; + nv = &ha->nvram; + chksum = 0; + for (cnt = 0; cnt < 3; cnt++) { + *wptr = qla1280_get_nvram_word(ha, cnt); + chksum += *wptr & 0xff; + chksum += (*wptr >> 8) & 0xff; + wptr++; + } + + if (nv->id0 != 'I' || nv->id1 != 'S' || + nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) { + dprintk(2, "Invalid nvram ID or version!\n"); + chksum = 1; + } else { + for (; cnt < sizeof(struct nvram); cnt++) { + *wptr = qla1280_get_nvram_word(ha, cnt); + chksum += *wptr & 0xff; + chksum += (*wptr >> 8) & 0xff; + wptr++; + } + } + + dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x" + " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3, + nv->version); + + + if (chksum) { + if (!driver_setup.no_nvram) + printk(KERN_WARNING "scsi(%ld): Unable to identify or " + "validate NVRAM checksum, using default " + "settings\n", ha->host_no); + ha->nvram_valid = 0; + } else + ha->nvram_valid = 1; + + /* The firmware interface is, um, interesting, in that the + * actual firmware image on the chip is little endian, thus, + * the process of taking that image to the CPU would end up + * little endian. However, the firmware interface requires it + * to be read a word (two bytes) at a time. + * + * The net result of this would be that the word (and + * doubleword) quantities in the firmware would be correct, but + * the bytes would be pairwise reversed. Since most of the + * firmware quantities are, in fact, bytes, we do an extra + * le16_to_cpu() in the firmware read routine. + * + * The upshot of all this is that the bytes in the firmware + * are in the correct places, but the 16 and 32 bit quantities + * are still in little endian format. We fix that up below by + * doing extra reverses on them */ + nv->isp_parameter = cpu_to_le16(nv->isp_parameter); + nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w); + for(i = 0; i < MAX_BUSES; i++) { + nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout); + nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth); + } + dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n"); + LEAVE("qla1280_read_nvram"); + + return chksum; +} + +/************************************************************************** + * qla1280_info + * Return a string describing the driver. + **************************************************************************/ +static const char * +qla1280_info(struct Scsi_Host *host) +{ + static char qla1280_scsi_name_buffer[125]; + char *bp; + struct scsi_qla_host *ha; + struct qla_boards *bdp; + + bp = &qla1280_scsi_name_buffer[0]; + ha = (struct scsi_qla_host *)host->hostdata; + bdp = &ql1280_board_tbl[ha->devnum]; + memset(bp, 0, sizeof(qla1280_scsi_name_buffer)); + + sprintf (bp, + "QLogic %s PCI to SCSI Host Adapter\n" + " Firmware version: %2d.%02d.%02d, Driver version %s", + &bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3, + QLA1280_VERSION); + return bp; +} + +/************************************************************************** + * qla1280_queuecommand + * Queue a command to the controller. + * + * Note: + * The mid-level driver tries to ensures that queuecommand never gets invoked + * concurrently with itself or the interrupt handler (although the + * interrupt handler may call this routine as part of request-completion + * handling). Unfortunately, it sometimes calls the scheduler in interrupt + * context which is a big NO! NO!. + **************************************************************************/ +static int qla1280_queuecommand_lck(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; + struct srb *sp = scsi_cmd_priv(cmd); + int status; + + sp->cmd = cmd; + sp->flags = 0; + sp->wait = NULL; + CMD_HANDLE(cmd) = (unsigned char *)NULL; + + qla1280_print_scsi_cmd(5, cmd); + +#ifdef QLA_64BIT_PTR + /* + * Using 64 bit commands if the PCI bridge doesn't support it is a + * bit wasteful, however this should really only happen if one's + * PCI controller is completely broken, like the BCM1250. For + * sane hardware this is not an issue. + */ + status = qla1280_64bit_start_scsi(ha, sp); +#else + status = qla1280_32bit_start_scsi(ha, sp); +#endif + return status; +} + +static DEF_SCSI_QCMD(qla1280_queuecommand) + +enum action { + ABORT_COMMAND, + DEVICE_RESET, + BUS_RESET, + ADAPTER_RESET, +}; + + +static void qla1280_mailbox_timeout(struct timer_list *t) +{ + struct scsi_qla_host *ha = from_timer(ha, t, mailbox_timer); + struct device_reg __iomem *reg; + reg = ha->iobase; + + ha->mailbox_out[0] = RD_REG_WORD(®->mailbox0); + printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, " + "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0], + RD_REG_WORD(®->ictrl), RD_REG_WORD(®->istatus)); + complete(ha->mailbox_wait); +} + +static int +_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp, + struct completion *wait) +{ + int status = FAILED; + struct scsi_cmnd *cmd = sp->cmd; + + spin_unlock_irq(ha->host->host_lock); + wait_for_completion_timeout(wait, 4*HZ); + spin_lock_irq(ha->host->host_lock); + sp->wait = NULL; + if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) { + status = SUCCESS; + scsi_done(cmd); + } + return status; +} + +static int +qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp) +{ + DECLARE_COMPLETION_ONSTACK(wait); + + sp->wait = &wait; + return _qla1280_wait_for_single_command(ha, sp, &wait); +} + +static int +qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target) +{ + int cnt; + int status; + struct srb *sp; + struct scsi_cmnd *cmd; + + status = SUCCESS; + + /* + * Wait for all commands with the designated bus/target + * to be completed by the firmware + */ + for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + sp = ha->outstanding_cmds[cnt]; + if (sp) { + cmd = sp->cmd; + + if (bus >= 0 && SCSI_BUS_32(cmd) != bus) + continue; + if (target >= 0 && SCSI_TCN_32(cmd) != target) + continue; + + status = qla1280_wait_for_single_command(ha, sp); + if (status == FAILED) + break; + } + } + return status; +} + +/************************************************************************** + * qla1280_error_action + * The function will attempt to perform a specified error action and + * wait for the results (or time out). + * + * Input: + * cmd = Linux SCSI command packet of the command that cause the + * bus reset. + * action = error action to take (see action_t) + * + * Returns: + * SUCCESS or FAILED + * + **************************************************************************/ +static int +qla1280_error_action(struct scsi_cmnd *cmd, enum action action) +{ + struct scsi_qla_host *ha; + int bus, target, lun; + struct srb *sp; + int i, found; + int result=FAILED; + int wait_for_bus=-1; + int wait_for_target = -1; + DECLARE_COMPLETION_ONSTACK(wait); + + ENTER("qla1280_error_action"); + + ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata); + sp = scsi_cmd_priv(cmd); + bus = SCSI_BUS_32(cmd); + target = SCSI_TCN_32(cmd); + lun = SCSI_LUN_32(cmd); + + dprintk(4, "error_action %i, istatus 0x%04x\n", action, + RD_REG_WORD(&ha->iobase->istatus)); + + dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n", + RD_REG_WORD(&ha->iobase->host_cmd), + RD_REG_WORD(&ha->iobase->ictrl), jiffies); + + if (qla1280_verbose) + printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, " + "Handle=0x%p, action=0x%x\n", + ha->host_no, cmd, CMD_HANDLE(cmd), action); + + /* + * Check to see if we have the command in the outstanding_cmds[] + * array. If not then it must have completed before this error + * action was initiated. If the error_action isn't ABORT_COMMAND + * then the driver must proceed with the requested action. + */ + found = -1; + for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) { + if (sp == ha->outstanding_cmds[i]) { + found = i; + sp->wait = &wait; /* we'll wait for it to complete */ + break; + } + } + + if (found < 0) { /* driver doesn't have command */ + result = SUCCESS; + if (qla1280_verbose) { + printk(KERN_INFO + "scsi(%ld:%d:%d:%d): specified command has " + "already completed.\n", ha->host_no, bus, + target, lun); + } + } + + switch (action) { + + case ABORT_COMMAND: + dprintk(1, "qla1280: RISC aborting command\n"); + /* + * The abort might fail due to race when the host_lock + * is released to issue the abort. As such, we + * don't bother to check the return status. + */ + if (found >= 0) + qla1280_abort_command(ha, sp, found); + break; + + case DEVICE_RESET: + if (qla1280_verbose) + printk(KERN_INFO + "scsi(%ld:%d:%d:%d): Queueing device reset " + "command.\n", ha->host_no, bus, target, lun); + if (qla1280_device_reset(ha, bus, target) == 0) { + /* issued device reset, set wait conditions */ + wait_for_bus = bus; + wait_for_target = target; + } + break; + + case BUS_RESET: + if (qla1280_verbose) + printk(KERN_INFO "qla1280(%ld:%d): Issued bus " + "reset.\n", ha->host_no, bus); + if (qla1280_bus_reset(ha, bus) == 0) { + /* issued bus reset, set wait conditions */ + wait_for_bus = bus; + } + break; + + case ADAPTER_RESET: + default: + if (qla1280_verbose) { + printk(KERN_INFO + "scsi(%ld): Issued ADAPTER RESET\n", + ha->host_no); + printk(KERN_INFO "scsi(%ld): I/O processing will " + "continue automatically\n", ha->host_no); + } + ha->flags.reset_active = 1; + + if (qla1280_abort_isp(ha) != 0) { /* it's dead */ + result = FAILED; + } + + ha->flags.reset_active = 0; + } + + /* + * At this point, the host_lock has been released and retaken + * by the issuance of the mailbox command. + * Wait for the command passed in by the mid-layer if it + * was found by the driver. It might have been returned + * between eh recovery steps, hence the check of the "found" + * variable. + */ + + if (found >= 0) + result = _qla1280_wait_for_single_command(ha, sp, &wait); + + if (action == ABORT_COMMAND && result != SUCCESS) { + printk(KERN_WARNING + "scsi(%li:%i:%i:%i): " + "Unable to abort command!\n", + ha->host_no, bus, target, lun); + } + + /* + * If the command passed in by the mid-layer has been + * returned by the board, then wait for any additional + * commands which are supposed to complete based upon + * the error action. + * + * All commands are unconditionally returned during a + * call to qla1280_abort_isp(), ADAPTER_RESET. No need + * to wait for them. + */ + if (result == SUCCESS && wait_for_bus >= 0) { + result = qla1280_wait_for_pending_commands(ha, + wait_for_bus, wait_for_target); + } + + dprintk(1, "RESET returning %d\n", result); + + LEAVE("qla1280_error_action"); + return result; +} + +/************************************************************************** + * qla1280_abort + * Abort the specified SCSI command(s). + **************************************************************************/ +static int +qla1280_eh_abort(struct scsi_cmnd * cmd) +{ + int rc; + + spin_lock_irq(cmd->device->host->host_lock); + rc = qla1280_error_action(cmd, ABORT_COMMAND); + spin_unlock_irq(cmd->device->host->host_lock); + + return rc; +} + +/************************************************************************** + * qla1280_device_reset + * Reset the specified SCSI device + **************************************************************************/ +static int +qla1280_eh_device_reset(struct scsi_cmnd *cmd) +{ + int rc; + + spin_lock_irq(cmd->device->host->host_lock); + rc = qla1280_error_action(cmd, DEVICE_RESET); + spin_unlock_irq(cmd->device->host->host_lock); + + return rc; +} + +/************************************************************************** + * qla1280_bus_reset + * Reset the specified bus. + **************************************************************************/ +static int +qla1280_eh_bus_reset(struct scsi_cmnd *cmd) +{ + int rc; + + spin_lock_irq(cmd->device->host->host_lock); + rc = qla1280_error_action(cmd, BUS_RESET); + spin_unlock_irq(cmd->device->host->host_lock); + + return rc; +} + +/************************************************************************** + * qla1280_adapter_reset + * Reset the specified adapter (both channels) + **************************************************************************/ +static int +qla1280_eh_adapter_reset(struct scsi_cmnd *cmd) +{ + int rc; + + spin_lock_irq(cmd->device->host->host_lock); + rc = qla1280_error_action(cmd, ADAPTER_RESET); + spin_unlock_irq(cmd->device->host->host_lock); + + return rc; +} + +static int +qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + int heads, sectors, cylinders; + + heads = 64; + sectors = 32; + cylinders = (unsigned long)capacity / (heads * sectors); + if (cylinders > 1024) { + heads = 255; + sectors = 63; + cylinders = (unsigned long)capacity / (heads * sectors); + /* if (cylinders > 1023) + cylinders = 1023; */ + } + + geom[0] = heads; + geom[1] = sectors; + geom[2] = cylinders; + + return 0; +} + + +/* disable risc and host interrupts */ +static inline void +qla1280_disable_intrs(struct scsi_qla_host *ha) +{ + WRT_REG_WORD(&ha->iobase->ictrl, 0); + RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */ +} + +/* enable risc and host interrupts */ +static inline void +qla1280_enable_intrs(struct scsi_qla_host *ha) +{ + WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC)); + RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */ +} + +/************************************************************************** + * qla1280_intr_handler + * Handles the H/W interrupt + **************************************************************************/ +static irqreturn_t +qla1280_intr_handler(int irq, void *dev_id) +{ + struct scsi_qla_host *ha; + struct device_reg __iomem *reg; + u16 data; + int handled = 0; + + ENTER_INTR ("qla1280_intr_handler"); + ha = (struct scsi_qla_host *)dev_id; + + spin_lock(ha->host->host_lock); + + ha->isr_count++; + reg = ha->iobase; + + qla1280_disable_intrs(ha); + + data = qla1280_debounce_register(®->istatus); + /* Check for pending interrupts. */ + if (data & RISC_INT) { + qla1280_isr(ha, &ha->done_q); + handled = 1; + } + if (!list_empty(&ha->done_q)) + qla1280_done(ha); + + spin_unlock(ha->host->host_lock); + + qla1280_enable_intrs(ha); + + LEAVE_INTR("qla1280_intr_handler"); + return IRQ_RETVAL(handled); +} + + +static int +qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target) +{ + uint8_t mr; + uint16_t mb[MAILBOX_REGISTER_COUNT]; + struct nvram *nv; + int status, lun; + + nv = &ha->nvram; + + mr = BIT_3 | BIT_2 | BIT_1 | BIT_0; + + /* Set Target Parameters. */ + mb[0] = MBC_SET_TARGET_PARAMETERS; + mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); + mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8; + mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9; + mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10; + mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11; + mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12; + mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13; + mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14; + mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15; + + if (IS_ISP1x160(ha)) { + mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5; + mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8); + mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) | + nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width; + mr |= BIT_6; + } else { + mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8); + } + mb[3] |= nv->bus[bus].target[target].sync_period; + + status = qla1280_mailbox_command(ha, mr, mb); + + /* Set Device Queue Parameters. */ + for (lun = 0; lun < MAX_LUNS; lun++) { + mb[0] = MBC_SET_DEVICE_QUEUE; + mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); + mb[1] |= lun; + mb[2] = nv->bus[bus].max_queue_depth; + mb[3] = nv->bus[bus].target[target].execution_throttle; + status |= qla1280_mailbox_command(ha, 0x0f, mb); + } + + if (status) + printk(KERN_WARNING "scsi(%ld:%i:%i): " + "qla1280_set_target_parameters() failed\n", + ha->host_no, bus, target); + return status; +} + + +/************************************************************************** + * qla1280_slave_configure + * + * Description: + * Determines the queue depth for a given device. There are two ways + * a queue depth can be obtained for a tagged queueing device. One + * way is the default queue depth which is determined by whether + * If it is defined, then it is used + * as the default queue depth. Otherwise, we use either 4 or 8 as the + * default queue depth (dependent on the number of hardware SCBs). + **************************************************************************/ +static int +qla1280_slave_configure(struct scsi_device *device) +{ + struct scsi_qla_host *ha; + int default_depth = 3; + int bus = device->channel; + int target = device->id; + int status = 0; + struct nvram *nv; + unsigned long flags; + + ha = (struct scsi_qla_host *)device->host->hostdata; + nv = &ha->nvram; + + if (qla1280_check_for_dead_scsi_bus(ha, bus)) + return 1; + + if (device->tagged_supported && + (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) { + scsi_change_queue_depth(device, ha->bus_settings[bus].hiwat); + } else { + scsi_change_queue_depth(device, default_depth); + } + + nv->bus[bus].target[target].parameter.enable_sync = device->sdtr; + nv->bus[bus].target[target].parameter.enable_wide = device->wdtr; + nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr; + + if (driver_setup.no_sync || + (driver_setup.sync_mask && + (~driver_setup.sync_mask & (1 << target)))) + nv->bus[bus].target[target].parameter.enable_sync = 0; + if (driver_setup.no_wide || + (driver_setup.wide_mask && + (~driver_setup.wide_mask & (1 << target)))) + nv->bus[bus].target[target].parameter.enable_wide = 0; + if (IS_ISP1x160(ha)) { + if (driver_setup.no_ppr || + (driver_setup.ppr_mask && + (~driver_setup.ppr_mask & (1 << target)))) + nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0; + } + + spin_lock_irqsave(ha->host->host_lock, flags); + if (nv->bus[bus].target[target].parameter.enable_sync) + status = qla1280_set_target_parameters(ha, bus, target); + qla1280_get_target_parameters(ha, device); + spin_unlock_irqrestore(ha->host->host_lock, flags); + return status; +} + + +/* + * qla1280_done + * Process completed commands. + * + * Input: + * ha = adapter block pointer. + */ +static void +qla1280_done(struct scsi_qla_host *ha) +{ + struct srb *sp; + struct list_head *done_q; + int bus, target; + struct scsi_cmnd *cmd; + + ENTER("qla1280_done"); + + done_q = &ha->done_q; + + while (!list_empty(done_q)) { + sp = list_entry(done_q->next, struct srb, list); + + list_del(&sp->list); + + cmd = sp->cmd; + bus = SCSI_BUS_32(cmd); + target = SCSI_TCN_32(cmd); + + switch ((CMD_RESULT(cmd) >> 16)) { + case DID_RESET: + /* Issue marker command. */ + if (!ha->flags.abort_isp_active) + qla1280_marker(ha, bus, target, 0, MK_SYNC_ID); + break; + case DID_ABORT: + sp->flags &= ~SRB_ABORT_PENDING; + sp->flags |= SRB_ABORTED; + break; + default: + break; + } + + /* Release memory used for this I/O */ + scsi_dma_unmap(cmd); + + /* Call the mid-level driver interrupt handler */ + ha->actthreads--; + + if (sp->wait == NULL) + scsi_done(cmd); + else + complete(sp->wait); + } + LEAVE("qla1280_done"); +} + +/* + * Translates a ISP error to a Linux SCSI error + */ +static int +qla1280_return_status(struct response * sts, struct scsi_cmnd *cp) +{ + int host_status = DID_ERROR; + uint16_t comp_status = le16_to_cpu(sts->comp_status); + uint16_t state_flags = le16_to_cpu(sts->state_flags); + uint32_t residual_length = le32_to_cpu(sts->residual_length); + uint16_t scsi_status = le16_to_cpu(sts->scsi_status); +#if DEBUG_QLA1280_INTR + static char *reason[] = { + "DID_OK", + "DID_NO_CONNECT", + "DID_BUS_BUSY", + "DID_TIME_OUT", + "DID_BAD_TARGET", + "DID_ABORT", + "DID_PARITY", + "DID_ERROR", + "DID_RESET", + "DID_BAD_INTR" + }; +#endif /* DEBUG_QLA1280_INTR */ + + ENTER("qla1280_return_status"); + +#if DEBUG_QLA1280_INTR + /* + dprintk(1, "qla1280_return_status: compl status = 0x%04x\n", + comp_status); + */ +#endif + + switch (comp_status) { + case CS_COMPLETE: + host_status = DID_OK; + break; + + case CS_INCOMPLETE: + if (!(state_flags & SF_GOT_BUS)) + host_status = DID_NO_CONNECT; + else if (!(state_flags & SF_GOT_TARGET)) + host_status = DID_BAD_TARGET; + else if (!(state_flags & SF_SENT_CDB)) + host_status = DID_ERROR; + else if (!(state_flags & SF_TRANSFERRED_DATA)) + host_status = DID_ERROR; + else if (!(state_flags & SF_GOT_STATUS)) + host_status = DID_ERROR; + else if (!(state_flags & SF_GOT_SENSE)) + host_status = DID_ERROR; + break; + + case CS_RESET: + host_status = DID_RESET; + break; + + case CS_ABORTED: + host_status = DID_ABORT; + break; + + case CS_TIMEOUT: + host_status = DID_TIME_OUT; + break; + + case CS_DATA_OVERRUN: + dprintk(2, "Data overrun 0x%x\n", residual_length); + dprintk(2, "qla1280_return_status: response packet data\n"); + qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE); + host_status = DID_ERROR; + break; + + case CS_DATA_UNDERRUN: + if ((scsi_bufflen(cp) - residual_length) < + cp->underflow) { + printk(KERN_WARNING + "scsi: Underflow detected - retrying " + "command.\n"); + host_status = DID_ERROR; + } else { + scsi_set_resid(cp, residual_length); + host_status = DID_OK; + } + break; + + default: + host_status = DID_ERROR; + break; + } + +#if DEBUG_QLA1280_INTR + dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n", + reason[host_status], scsi_status); +#endif + + LEAVE("qla1280_return_status"); + + return (scsi_status & 0xff) | (host_status << 16); +} + +/****************************************************************************/ +/* QLogic ISP1280 Hardware Support Functions. */ +/****************************************************************************/ + +/* + * qla1280_initialize_adapter + * Initialize board. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * 0 = success + */ +static int +qla1280_initialize_adapter(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg; + int status; + int bus; + unsigned long flags; + + ENTER("qla1280_initialize_adapter"); + + /* Clear adapter flags. */ + ha->flags.online = 0; + ha->flags.disable_host_adapter = 0; + ha->flags.reset_active = 0; + ha->flags.abort_isp_active = 0; + + /* TODO: implement support for the 1040 nvram format */ + if (IS_ISP1040(ha)) + driver_setup.no_nvram = 1; + + dprintk(1, "Configure PCI space for adapter...\n"); + + reg = ha->iobase; + + /* Insure mailbox registers are free. */ + WRT_REG_WORD(®->semaphore, 0); + WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT); + WRT_REG_WORD(®->host_cmd, HC_CLR_HOST_INT); + RD_REG_WORD(®->host_cmd); + + if (qla1280_read_nvram(ha)) { + dprintk(2, "qla1280_initialize_adapter: failed to read " + "NVRAM\n"); + } + + /* + * It's necessary to grab the spin here as qla1280_mailbox_command + * needs to be able to drop the lock unconditionally to wait + * for completion. + */ + spin_lock_irqsave(ha->host->host_lock, flags); + + status = qla1280_load_firmware(ha); + if (status) { + printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n", + ha->host_no); + goto out; + } + + /* Setup adapter based on NVRAM parameters. */ + dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no); + qla1280_nvram_config(ha); + + if (ha->flags.disable_host_adapter) { + status = 1; + goto out; + } + + status = qla1280_init_rings(ha); + if (status) + goto out; + + /* Issue SCSI reset, if we can't reset twice then bus is dead */ + for (bus = 0; bus < ha->ports; bus++) { + if (!ha->bus_settings[bus].disable_scsi_reset && + qla1280_bus_reset(ha, bus) && + qla1280_bus_reset(ha, bus)) + ha->bus_settings[bus].scsi_bus_dead = 1; + } + + ha->flags.online = 1; + out: + spin_unlock_irqrestore(ha->host->host_lock, flags); + + if (status) + dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n"); + + LEAVE("qla1280_initialize_adapter"); + return status; +} + +/* + * qla1280_request_firmware + * Acquire firmware for chip. Retain in memory + * for error recovery. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * Pointer to firmware image or an error code + * cast to pointer via ERR_PTR(). + */ +static const struct firmware * +qla1280_request_firmware(struct scsi_qla_host *ha) +{ + const struct firmware *fw; + int err; + int index; + char *fwname; + + spin_unlock_irq(ha->host->host_lock); + mutex_lock(&qla1280_firmware_mutex); + + index = ql1280_board_tbl[ha->devnum].fw_index; + fw = qla1280_fw_tbl[index].fw; + if (fw) + goto out; + + fwname = qla1280_fw_tbl[index].fwname; + err = request_firmware(&fw, fwname, &ha->pdev->dev); + + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fwname, err); + fw = ERR_PTR(err); + goto unlock; + } + if ((fw->size % 2) || (fw->size < 6)) { + printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n", + fw->size, fwname); + release_firmware(fw); + fw = ERR_PTR(-EINVAL); + goto unlock; + } + + qla1280_fw_tbl[index].fw = fw; + + out: + ha->fwver1 = fw->data[0]; + ha->fwver2 = fw->data[1]; + ha->fwver3 = fw->data[2]; + unlock: + mutex_unlock(&qla1280_firmware_mutex); + spin_lock_irq(ha->host->host_lock); + return fw; +} + +/* + * Chip diagnostics + * Test chip for proper operation. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * 0 = success. + */ +static int +qla1280_chip_diag(struct scsi_qla_host *ha) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + struct device_reg __iomem *reg = ha->iobase; + int status = 0; + int cnt; + uint16_t data; + dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", ®->id_l); + + dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no); + + /* Soft reset chip and wait for it to finish. */ + WRT_REG_WORD(®->ictrl, ISP_RESET); + + /* + * We can't do a traditional PCI write flush here by reading + * back the register. The card will not respond once the reset + * is in action and we end up with a machine check exception + * instead. Nothing to do but wait and hope for the best. + * A portable pci_write_flush(pdev) call would be very useful here. + */ + udelay(20); + data = qla1280_debounce_register(®->ictrl); + /* + * Yet another QLogic gem ;-( + */ + for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) { + udelay(5); + data = RD_REG_WORD(®->ictrl); + } + + if (!cnt) + goto fail; + + /* Reset register cleared by chip reset. */ + dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n"); + + WRT_REG_WORD(®->cfg_1, 0); + + /* Reset RISC and disable BIOS which + allows RISC to execute out of RAM. */ + WRT_REG_WORD(®->host_cmd, HC_RESET_RISC | + HC_RELEASE_RISC | HC_DISABLE_BIOS); + + RD_REG_WORD(®->id_l); /* Flush PCI write */ + data = qla1280_debounce_register(®->mailbox0); + + /* + * I *LOVE* this code! + */ + for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) { + udelay(5); + data = RD_REG_WORD(®->mailbox0); + } + + if (!cnt) + goto fail; + + /* Check product ID of chip */ + dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n"); + + if (RD_REG_WORD(®->mailbox1) != PROD_ID_1 || + (RD_REG_WORD(®->mailbox2) != PROD_ID_2 && + RD_REG_WORD(®->mailbox2) != PROD_ID_2a) || + RD_REG_WORD(®->mailbox3) != PROD_ID_3 || + RD_REG_WORD(®->mailbox4) != PROD_ID_4) { + printk(KERN_INFO "qla1280: Wrong product ID = " + "0x%x,0x%x,0x%x,0x%x\n", + RD_REG_WORD(®->mailbox1), + RD_REG_WORD(®->mailbox2), + RD_REG_WORD(®->mailbox3), + RD_REG_WORD(®->mailbox4)); + goto fail; + } + + /* + * Enable ints early!!! + */ + qla1280_enable_intrs(ha); + + dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n"); + /* Wrap Incoming Mailboxes Test. */ + mb[0] = MBC_MAILBOX_REGISTER_TEST; + mb[1] = 0xAAAA; + mb[2] = 0x5555; + mb[3] = 0xAA55; + mb[4] = 0x55AA; + mb[5] = 0xA5A5; + mb[6] = 0x5A5A; + mb[7] = 0x2525; + + status = qla1280_mailbox_command(ha, 0xff, mb); + if (status) + goto fail; + + if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 || + mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A || + mb[7] != 0x2525) { + printk(KERN_INFO "qla1280: Failed mbox check\n"); + goto fail; + } + + dprintk(3, "qla1280_chip_diag: exiting normally\n"); + return 0; + fail: + dprintk(2, "qla1280_chip_diag: **** FAILED ****\n"); + return status; +} + +static int +qla1280_load_firmware_pio(struct scsi_qla_host *ha) +{ + /* enter with host_lock acquired */ + + const struct firmware *fw; + const __le16 *fw_data; + uint16_t risc_address, risc_code_size; + uint16_t mb[MAILBOX_REGISTER_COUNT], i; + int err = 0; + + fw = qla1280_request_firmware(ha); + if (IS_ERR(fw)) + return PTR_ERR(fw); + + fw_data = (const __le16 *)&fw->data[0]; + ha->fwstart = __le16_to_cpu(fw_data[2]); + + /* Load RISC code. */ + risc_address = ha->fwstart; + fw_data = (const __le16 *)&fw->data[6]; + risc_code_size = (fw->size - 6) / 2; + + for (i = 0; i < risc_code_size; i++) { + mb[0] = MBC_WRITE_RAM_WORD; + mb[1] = risc_address + i; + mb[2] = __le16_to_cpu(fw_data[i]); + + err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb); + if (err) { + printk(KERN_ERR "scsi(%li): Failed to load firmware\n", + ha->host_no); + break; + } + } + + return err; +} + +#ifdef QLA_64BIT_PTR +#define LOAD_CMD MBC_LOAD_RAM_A64_ROM +#define DUMP_CMD MBC_DUMP_RAM_A64_ROM +#define CMD_ARGS (BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0) +#else +#define LOAD_CMD MBC_LOAD_RAM +#define DUMP_CMD MBC_DUMP_RAM +#define CMD_ARGS (BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0) +#endif + +#define DUMP_IT_BACK 0 /* for debug of RISC loading */ +static int +qla1280_load_firmware_dma(struct scsi_qla_host *ha) +{ + /* enter with host_lock acquired */ + const struct firmware *fw; + const __le16 *fw_data; + uint16_t risc_address, risc_code_size; + uint16_t mb[MAILBOX_REGISTER_COUNT], cnt; + int err = 0, num, i; +#if DUMP_IT_BACK + uint8_t *sp, *tbuf; + dma_addr_t p_tbuf; + + tbuf = dma_alloc_coherent(&ha->pdev->dev, 8000, &p_tbuf, GFP_KERNEL); + if (!tbuf) + return -ENOMEM; +#endif + + fw = qla1280_request_firmware(ha); + if (IS_ERR(fw)) + return PTR_ERR(fw); + + fw_data = (const __le16 *)&fw->data[0]; + ha->fwstart = __le16_to_cpu(fw_data[2]); + + /* Load RISC code. */ + risc_address = ha->fwstart; + fw_data = (const __le16 *)&fw->data[6]; + risc_code_size = (fw->size - 6) / 2; + + dprintk(1, "%s: DMA RISC code (%i) words\n", + __func__, risc_code_size); + + num = 0; + while (risc_code_size > 0) { + int warn __attribute__((unused)) = 0; + + cnt = 2000 >> 1; + + if (cnt > risc_code_size) + cnt = risc_code_size; + + dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p)," + "%d,%d(0x%x)\n", + fw_data, cnt, num, risc_address); + for(i = 0; i < cnt; i++) + ((__le16 *)ha->request_ring)[i] = fw_data[i]; + + mb[0] = LOAD_CMD; + mb[1] = risc_address; + mb[4] = cnt; + mb[3] = ha->request_dma & 0xffff; + mb[2] = (ha->request_dma >> 16) & 0xffff; + mb[7] = upper_32_bits(ha->request_dma) & 0xffff; + mb[6] = upper_32_bits(ha->request_dma) >> 16; + dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n", + __func__, mb[0], + (void *)(long)ha->request_dma, + mb[6], mb[7], mb[2], mb[3]); + err = qla1280_mailbox_command(ha, CMD_ARGS, mb); + if (err) { + printk(KERN_ERR "scsi(%li): Failed to load partial " + "segment of f\n", ha->host_no); + goto out; + } + +#if DUMP_IT_BACK + mb[0] = DUMP_CMD; + mb[1] = risc_address; + mb[4] = cnt; + mb[3] = p_tbuf & 0xffff; + mb[2] = (p_tbuf >> 16) & 0xffff; + mb[7] = upper_32_bits(p_tbuf) & 0xffff; + mb[6] = upper_32_bits(p_tbuf) >> 16; + + err = qla1280_mailbox_command(ha, CMD_ARGS, mb); + if (err) { + printk(KERN_ERR + "Failed to dump partial segment of f/w\n"); + goto out; + } + sp = (uint8_t *)ha->request_ring; + for (i = 0; i < (cnt << 1); i++) { + if (tbuf[i] != sp[i] && warn++ < 10) { + printk(KERN_ERR "%s: FW compare error @ " + "byte(0x%x) loop#=%x\n", + __func__, i, num); + printk(KERN_ERR "%s: FWbyte=%x " + "FWfromChip=%x\n", + __func__, sp[i], tbuf[i]); + /*break; */ + } + } +#endif + risc_address += cnt; + risc_code_size = risc_code_size - cnt; + fw_data = fw_data + cnt; + num++; + } + + out: +#if DUMP_IT_BACK + dma_free_coherent(&ha->pdev->dev, 8000, tbuf, p_tbuf); +#endif + return err; +} + +static int +qla1280_start_firmware(struct scsi_qla_host *ha) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + int err; + + dprintk(1, "%s: Verifying checksum of loaded RISC code.\n", + __func__); + + /* Verify checksum of loaded RISC code. */ + mb[0] = MBC_VERIFY_CHECKSUM; + /* mb[1] = ql12_risc_code_addr01; */ + mb[1] = ha->fwstart; + err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); + if (err) { + printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no); + return err; + } + + /* Start firmware execution. */ + dprintk(1, "%s: start firmware running.\n", __func__); + mb[0] = MBC_EXECUTE_FIRMWARE; + mb[1] = ha->fwstart; + err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); + if (err) { + printk(KERN_ERR "scsi(%li): Failed to start firmware\n", + ha->host_no); + } + + return err; +} + +static int +qla1280_load_firmware(struct scsi_qla_host *ha) +{ + /* enter with host_lock taken */ + int err; + + err = qla1280_chip_diag(ha); + if (err) + goto out; + if (IS_ISP1040(ha)) + err = qla1280_load_firmware_pio(ha); + else + err = qla1280_load_firmware_dma(ha); + if (err) + goto out; + err = qla1280_start_firmware(ha); + out: + return err; +} + +/* + * Initialize rings + * + * Input: + * ha = adapter block pointer. + * ha->request_ring = request ring virtual address + * ha->response_ring = response ring virtual address + * ha->request_dma = request ring physical address + * ha->response_dma = response ring physical address + * + * Returns: + * 0 = success. + */ +static int +qla1280_init_rings(struct scsi_qla_host *ha) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + int status = 0; + + ENTER("qla1280_init_rings"); + + /* Clear outstanding commands array. */ + memset(ha->outstanding_cmds, 0, + sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS); + + /* Initialize request queue. */ + ha->request_ring_ptr = ha->request_ring; + ha->req_ring_index = 0; + ha->req_q_cnt = REQUEST_ENTRY_CNT; + /* mb[0] = MBC_INIT_REQUEST_QUEUE; */ + mb[0] = MBC_INIT_REQUEST_QUEUE_A64; + mb[1] = REQUEST_ENTRY_CNT; + mb[3] = ha->request_dma & 0xffff; + mb[2] = (ha->request_dma >> 16) & 0xffff; + mb[4] = 0; + mb[7] = upper_32_bits(ha->request_dma) & 0xffff; + mb[6] = upper_32_bits(ha->request_dma) >> 16; + if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 | + BIT_3 | BIT_2 | BIT_1 | BIT_0, + &mb[0]))) { + /* Initialize response queue. */ + ha->response_ring_ptr = ha->response_ring; + ha->rsp_ring_index = 0; + /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */ + mb[0] = MBC_INIT_RESPONSE_QUEUE_A64; + mb[1] = RESPONSE_ENTRY_CNT; + mb[3] = ha->response_dma & 0xffff; + mb[2] = (ha->response_dma >> 16) & 0xffff; + mb[5] = 0; + mb[7] = upper_32_bits(ha->response_dma) & 0xffff; + mb[6] = upper_32_bits(ha->response_dma) >> 16; + status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 | + BIT_3 | BIT_2 | BIT_1 | BIT_0, + &mb[0]); + } + + if (status) + dprintk(2, "qla1280_init_rings: **** FAILED ****\n"); + + LEAVE("qla1280_init_rings"); + return status; +} + +static void +qla1280_print_settings(struct nvram *nv) +{ + dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n", + nv->bus[0].config_1.initiator_id); + dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n", + nv->bus[1].config_1.initiator_id); + + dprintk(1, "qla1280 : bus reset delay[0]=%d\n", + nv->bus[0].bus_reset_delay); + dprintk(1, "qla1280 : bus reset delay[1]=%d\n", + nv->bus[1].bus_reset_delay); + + dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count); + dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay); + dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count); + dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay); + + dprintk(1, "qla1280 : async data setup time[0]=%d\n", + nv->bus[0].config_2.async_data_setup_time); + dprintk(1, "qla1280 : async data setup time[1]=%d\n", + nv->bus[1].config_2.async_data_setup_time); + + dprintk(1, "qla1280 : req/ack active negation[0]=%d\n", + nv->bus[0].config_2.req_ack_active_negation); + dprintk(1, "qla1280 : req/ack active negation[1]=%d\n", + nv->bus[1].config_2.req_ack_active_negation); + + dprintk(1, "qla1280 : data line active negation[0]=%d\n", + nv->bus[0].config_2.data_line_active_negation); + dprintk(1, "qla1280 : data line active negation[1]=%d\n", + nv->bus[1].config_2.data_line_active_negation); + + dprintk(1, "qla1280 : disable loading risc code=%d\n", + nv->cntr_flags_1.disable_loading_risc_code); + + dprintk(1, "qla1280 : enable 64bit addressing=%d\n", + nv->cntr_flags_1.enable_64bit_addressing); + + dprintk(1, "qla1280 : selection timeout limit[0]=%d\n", + nv->bus[0].selection_timeout); + dprintk(1, "qla1280 : selection timeout limit[1]=%d\n", + nv->bus[1].selection_timeout); + + dprintk(1, "qla1280 : max queue depth[0]=%d\n", + nv->bus[0].max_queue_depth); + dprintk(1, "qla1280 : max queue depth[1]=%d\n", + nv->bus[1].max_queue_depth); +} + +static void +qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target) +{ + struct nvram *nv = &ha->nvram; + + nv->bus[bus].target[target].parameter.renegotiate_on_error = 1; + nv->bus[bus].target[target].parameter.auto_request_sense = 1; + nv->bus[bus].target[target].parameter.tag_queuing = 1; + nv->bus[bus].target[target].parameter.enable_sync = 1; +#if 1 /* Some SCSI Processors do not seem to like this */ + nv->bus[bus].target[target].parameter.enable_wide = 1; +#endif + nv->bus[bus].target[target].execution_throttle = + nv->bus[bus].max_queue_depth - 1; + nv->bus[bus].target[target].parameter.parity_checking = 1; + nv->bus[bus].target[target].parameter.disconnect_allowed = 1; + + if (IS_ISP1x160(ha)) { + nv->bus[bus].target[target].flags.flags1x160.device_enable = 1; + nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e; + nv->bus[bus].target[target].sync_period = 9; + nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1; + nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2; + nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1; + } else { + nv->bus[bus].target[target].flags.flags1x80.device_enable = 1; + nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12; + nv->bus[bus].target[target].sync_period = 10; + } +} + +static void +qla1280_set_defaults(struct scsi_qla_host *ha) +{ + struct nvram *nv = &ha->nvram; + int bus, target; + + dprintk(1, "Using defaults for NVRAM: \n"); + memset(nv, 0, sizeof(struct nvram)); + + /* nv->cntr_flags_1.disable_loading_risc_code = 1; */ + nv->firmware_feature.f.enable_fast_posting = 1; + nv->firmware_feature.f.disable_synchronous_backoff = 1; + nv->termination.scsi_bus_0_control = 3; + nv->termination.scsi_bus_1_control = 3; + nv->termination.auto_term_support = 1; + + /* + * Set default FIFO magic - What appropriate values would be here + * is unknown. This is what I have found testing with 12160s. + * + * Now, I would love the magic decoder ring for this one, the + * header file provided by QLogic seems to be bogus or incomplete + * at best. + */ + nv->isp_config.burst_enable = 1; + if (IS_ISP1040(ha)) + nv->isp_config.fifo_threshold |= 3; + else + nv->isp_config.fifo_threshold |= 4; + + if (IS_ISP1x160(ha)) + nv->isp_parameter = 0x01; /* fast memory enable */ + + for (bus = 0; bus < MAX_BUSES; bus++) { + nv->bus[bus].config_1.initiator_id = 7; + nv->bus[bus].config_2.req_ack_active_negation = 1; + nv->bus[bus].config_2.data_line_active_negation = 1; + nv->bus[bus].selection_timeout = 250; + nv->bus[bus].max_queue_depth = 32; + + if (IS_ISP1040(ha)) { + nv->bus[bus].bus_reset_delay = 3; + nv->bus[bus].config_2.async_data_setup_time = 6; + nv->bus[bus].retry_delay = 1; + } else { + nv->bus[bus].bus_reset_delay = 5; + nv->bus[bus].config_2.async_data_setup_time = 8; + } + + for (target = 0; target < MAX_TARGETS; target++) + qla1280_set_target_defaults(ha, bus, target); + } +} + +static int +qla1280_config_target(struct scsi_qla_host *ha, int bus, int target) +{ + struct nvram *nv = &ha->nvram; + uint16_t mb[MAILBOX_REGISTER_COUNT]; + int status, lun; + uint16_t flag; + + /* Set Target Parameters. */ + mb[0] = MBC_SET_TARGET_PARAMETERS; + mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); + + /* + * Do not enable sync and ppr for the initial INQUIRY run. We + * enable this later if we determine the target actually + * supports it. + */ + mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE + | TP_WIDE | TP_PARITY | TP_DISCONNECT); + + if (IS_ISP1x160(ha)) + mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8; + else + mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8; + mb[3] |= nv->bus[bus].target[target].sync_period; + status = qla1280_mailbox_command(ha, 0x0f, mb); + + /* Save Tag queuing enable flag. */ + flag = (BIT_0 << target); + if (nv->bus[bus].target[target].parameter.tag_queuing) + ha->bus_settings[bus].qtag_enables |= flag; + + /* Save Device enable flag. */ + if (IS_ISP1x160(ha)) { + if (nv->bus[bus].target[target].flags.flags1x160.device_enable) + ha->bus_settings[bus].device_enables |= flag; + ha->bus_settings[bus].lun_disables |= 0; + } else { + if (nv->bus[bus].target[target].flags.flags1x80.device_enable) + ha->bus_settings[bus].device_enables |= flag; + /* Save LUN disable flag. */ + if (nv->bus[bus].target[target].flags.flags1x80.lun_disable) + ha->bus_settings[bus].lun_disables |= flag; + } + + /* Set Device Queue Parameters. */ + for (lun = 0; lun < MAX_LUNS; lun++) { + mb[0] = MBC_SET_DEVICE_QUEUE; + mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); + mb[1] |= lun; + mb[2] = nv->bus[bus].max_queue_depth; + mb[3] = nv->bus[bus].target[target].execution_throttle; + status |= qla1280_mailbox_command(ha, 0x0f, mb); + } + + return status; +} + +static int +qla1280_config_bus(struct scsi_qla_host *ha, int bus) +{ + struct nvram *nv = &ha->nvram; + uint16_t mb[MAILBOX_REGISTER_COUNT]; + int target, status; + + /* SCSI Reset Disable. */ + ha->bus_settings[bus].disable_scsi_reset = + nv->bus[bus].config_1.scsi_reset_disable; + + /* Initiator ID. */ + ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id; + mb[0] = MBC_SET_INITIATOR_ID; + mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 : + ha->bus_settings[bus].id; + status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); + + /* Reset Delay. */ + ha->bus_settings[bus].bus_reset_delay = + nv->bus[bus].bus_reset_delay; + + /* Command queue depth per device. */ + ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1; + + /* Set target parameters. */ + for (target = 0; target < MAX_TARGETS; target++) + status |= qla1280_config_target(ha, bus, target); + + return status; +} + +static int +qla1280_nvram_config(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg = ha->iobase; + struct nvram *nv = &ha->nvram; + int bus, target, status = 0; + uint16_t mb[MAILBOX_REGISTER_COUNT]; + + ENTER("qla1280_nvram_config"); + + if (ha->nvram_valid) { + /* Always force AUTO sense for LINUX SCSI */ + for (bus = 0; bus < MAX_BUSES; bus++) + for (target = 0; target < MAX_TARGETS; target++) { + nv->bus[bus].target[target].parameter. + auto_request_sense = 1; + } + } else { + qla1280_set_defaults(ha); + } + + qla1280_print_settings(nv); + + /* Disable RISC load of firmware. */ + ha->flags.disable_risc_code_load = + nv->cntr_flags_1.disable_loading_risc_code; + + if (IS_ISP1040(ha)) { + uint16_t hwrev, cfg1, cdma_conf; + + hwrev = RD_REG_WORD(®->cfg_0) & ISP_CFG0_HWMSK; + + cfg1 = RD_REG_WORD(®->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6); + cdma_conf = RD_REG_WORD(®->cdma_cfg); + + /* Busted fifo, says mjacob. */ + if (hwrev != ISP_CFG0_1040A) + cfg1 |= nv->isp_config.fifo_threshold << 4; + + cfg1 |= nv->isp_config.burst_enable << 2; + WRT_REG_WORD(®->cfg_1, cfg1); + + WRT_REG_WORD(®->cdma_cfg, cdma_conf | CDMA_CONF_BENAB); + WRT_REG_WORD(®->ddma_cfg, cdma_conf | DDMA_CONF_BENAB); + } else { + uint16_t cfg1, term; + + /* Set ISP hardware DMA burst */ + cfg1 = nv->isp_config.fifo_threshold << 4; + cfg1 |= nv->isp_config.burst_enable << 2; + /* Enable DMA arbitration on dual channel controllers */ + if (ha->ports > 1) + cfg1 |= BIT_13; + WRT_REG_WORD(®->cfg_1, cfg1); + + /* Set SCSI termination. */ + WRT_REG_WORD(®->gpio_enable, + BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0); + term = nv->termination.scsi_bus_1_control; + term |= nv->termination.scsi_bus_0_control << 2; + term |= nv->termination.auto_term_support << 7; + RD_REG_WORD(®->id_l); /* Flush PCI write */ + WRT_REG_WORD(®->gpio_data, term); + } + RD_REG_WORD(®->id_l); /* Flush PCI write */ + + /* ISP parameter word. */ + mb[0] = MBC_SET_SYSTEM_PARAMETER; + mb[1] = nv->isp_parameter; + status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); + + if (IS_ISP1x40(ha)) { + /* clock rate - for qla1240 and older, only */ + mb[0] = MBC_SET_CLOCK_RATE; + mb[1] = 40; + status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); + } + + /* Firmware feature word. */ + mb[0] = MBC_SET_FIRMWARE_FEATURES; + mb[1] = nv->firmware_feature.f.enable_fast_posting; + mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1; + mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5; + status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); + + /* Retry count and delay. */ + mb[0] = MBC_SET_RETRY_COUNT; + mb[1] = nv->bus[0].retry_count; + mb[2] = nv->bus[0].retry_delay; + mb[6] = nv->bus[1].retry_count; + mb[7] = nv->bus[1].retry_delay; + status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 | + BIT_1 | BIT_0, &mb[0]); + + /* ASYNC data setup time. */ + mb[0] = MBC_SET_ASYNC_DATA_SETUP; + mb[1] = nv->bus[0].config_2.async_data_setup_time; + mb[2] = nv->bus[1].config_2.async_data_setup_time; + status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]); + + /* Active negation states. */ + mb[0] = MBC_SET_ACTIVE_NEGATION; + mb[1] = 0; + if (nv->bus[0].config_2.req_ack_active_negation) + mb[1] |= BIT_5; + if (nv->bus[0].config_2.data_line_active_negation) + mb[1] |= BIT_4; + mb[2] = 0; + if (nv->bus[1].config_2.req_ack_active_negation) + mb[2] |= BIT_5; + if (nv->bus[1].config_2.data_line_active_negation) + mb[2] |= BIT_4; + status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb); + + mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY; + mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */ + status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); + + /* thingy */ + mb[0] = MBC_SET_PCI_CONTROL; + mb[1] = BIT_1; /* Data DMA Channel Burst Enable */ + mb[2] = BIT_1; /* Command DMA Channel Burst Enable */ + status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb); + + mb[0] = MBC_SET_TAG_AGE_LIMIT; + mb[1] = 8; + status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); + + /* Selection timeout. */ + mb[0] = MBC_SET_SELECTION_TIMEOUT; + mb[1] = nv->bus[0].selection_timeout; + mb[2] = nv->bus[1].selection_timeout; + status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb); + + for (bus = 0; bus < ha->ports; bus++) + status |= qla1280_config_bus(ha, bus); + + if (status) + dprintk(2, "qla1280_nvram_config: **** FAILED ****\n"); + + LEAVE("qla1280_nvram_config"); + return status; +} + +/* + * Get NVRAM data word + * Calculates word position in NVRAM and calls request routine to + * get the word from NVRAM. + * + * Input: + * ha = adapter block pointer. + * address = NVRAM word address. + * + * Returns: + * data word. + */ +static uint16_t +qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address) +{ + uint32_t nv_cmd; + uint16_t data; + + nv_cmd = address << 16; + nv_cmd |= NV_READ_OP; + + data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd)); + + dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = " + "0x%x", data); + + return data; +} + +/* + * NVRAM request + * Sends read command to NVRAM and gets data from NVRAM. + * + * Input: + * ha = adapter block pointer. + * nv_cmd = Bit 26 = start bit + * Bit 25, 24 = opcode + * Bit 23-16 = address + * Bit 15-0 = write data + * + * Returns: + * data word. + */ +static uint16_t +qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd) +{ + struct device_reg __iomem *reg = ha->iobase; + int cnt; + uint16_t data = 0; + uint16_t reg_data; + + /* Send command to NVRAM. */ + + nv_cmd <<= 5; + for (cnt = 0; cnt < 11; cnt++) { + if (nv_cmd & BIT_31) + qla1280_nv_write(ha, NV_DATA_OUT); + else + qla1280_nv_write(ha, 0); + nv_cmd <<= 1; + } + + /* Read data from NVRAM. */ + + for (cnt = 0; cnt < 16; cnt++) { + WRT_REG_WORD(®->nvram, (NV_SELECT | NV_CLOCK)); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + NVRAM_DELAY(); + data <<= 1; + reg_data = RD_REG_WORD(®->nvram); + if (reg_data & NV_DATA_IN) + data |= BIT_0; + WRT_REG_WORD(®->nvram, NV_SELECT); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + NVRAM_DELAY(); + } + + /* Deselect chip. */ + + WRT_REG_WORD(®->nvram, NV_DESELECT); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + NVRAM_DELAY(); + + return data; +} + +static void +qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data) +{ + struct device_reg __iomem *reg = ha->iobase; + + WRT_REG_WORD(®->nvram, data | NV_SELECT); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + NVRAM_DELAY(); + WRT_REG_WORD(®->nvram, data | NV_SELECT | NV_CLOCK); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + NVRAM_DELAY(); + WRT_REG_WORD(®->nvram, data | NV_SELECT); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + NVRAM_DELAY(); +} + +/* + * Mailbox Command + * Issue mailbox command and waits for completion. + * + * Input: + * ha = adapter block pointer. + * mr = mailbox registers to load. + * mb = data pointer for mailbox registers. + * + * Output: + * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data. + * + * Returns: + * 0 = success + */ +static int +qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb) +{ + struct device_reg __iomem *reg = ha->iobase; + int status = 0; + int cnt; + uint16_t *optr, *iptr; + uint16_t __iomem *mptr; + DECLARE_COMPLETION_ONSTACK(wait); + + ENTER("qla1280_mailbox_command"); + + if (ha->mailbox_wait) { + printk(KERN_ERR "Warning mailbox wait already in use!\n"); + } + ha->mailbox_wait = &wait; + + /* + * We really should start out by verifying that the mailbox is + * available before starting sending the command data + */ + /* Load mailbox registers. */ + mptr = (uint16_t __iomem *) ®->mailbox0; + iptr = mb; + for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) { + if (mr & BIT_0) { + WRT_REG_WORD(mptr, (*iptr)); + } + + mr >>= 1; + mptr++; + iptr++; + } + + /* Issue set host interrupt command. */ + + /* set up a timer just in case we're really jammed */ + timer_setup(&ha->mailbox_timer, qla1280_mailbox_timeout, 0); + mod_timer(&ha->mailbox_timer, jiffies + 20 * HZ); + + spin_unlock_irq(ha->host->host_lock); + WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT); + qla1280_debounce_register(®->istatus); + + wait_for_completion(&wait); + del_timer_sync(&ha->mailbox_timer); + + spin_lock_irq(ha->host->host_lock); + + ha->mailbox_wait = NULL; + + /* Check for mailbox command timeout. */ + if (ha->mailbox_out[0] != MBS_CMD_CMP) { + printk(KERN_WARNING "qla1280_mailbox_command: Command failed, " + "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = " + "0x%04x\n", + mb[0], ha->mailbox_out[0], RD_REG_WORD(®->istatus)); + printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n", + RD_REG_WORD(®->mailbox0), RD_REG_WORD(®->mailbox1), + RD_REG_WORD(®->mailbox2), RD_REG_WORD(®->mailbox3)); + printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n", + RD_REG_WORD(®->mailbox4), RD_REG_WORD(®->mailbox5), + RD_REG_WORD(®->mailbox6), RD_REG_WORD(®->mailbox7)); + status = 1; + } + + /* Load return mailbox registers. */ + optr = mb; + iptr = (uint16_t *) &ha->mailbox_out[0]; + mr = MAILBOX_REGISTER_COUNT; + memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t)); + + if (ha->flags.reset_marker) + qla1280_rst_aen(ha); + + if (status) + dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = " + "0x%x ****\n", mb[0]); + + LEAVE("qla1280_mailbox_command"); + return status; +} + +/* + * qla1280_poll + * Polls ISP for interrupts. + * + * Input: + * ha = adapter block pointer. + */ +static void +qla1280_poll(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg = ha->iobase; + uint16_t data; + LIST_HEAD(done_q); + + /* ENTER("qla1280_poll"); */ + + /* Check for pending interrupts. */ + data = RD_REG_WORD(®->istatus); + if (data & RISC_INT) + qla1280_isr(ha, &done_q); + + if (!ha->mailbox_wait) { + if (ha->flags.reset_marker) + qla1280_rst_aen(ha); + } + + if (!list_empty(&done_q)) + qla1280_done(ha); + + /* LEAVE("qla1280_poll"); */ +} + +/* + * qla1280_bus_reset + * Issue SCSI bus reset. + * + * Input: + * ha = adapter block pointer. + * bus = SCSI bus number. + * + * Returns: + * 0 = success + */ +static int +qla1280_bus_reset(struct scsi_qla_host *ha, int bus) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + uint16_t reset_delay; + int status; + + dprintk(3, "qla1280_bus_reset: entered\n"); + + if (qla1280_verbose) + printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n", + ha->host_no, bus); + + reset_delay = ha->bus_settings[bus].bus_reset_delay; + mb[0] = MBC_BUS_RESET; + mb[1] = reset_delay; + mb[2] = (uint16_t) bus; + status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]); + + if (status) { + if (ha->bus_settings[bus].failed_reset_count > 2) + ha->bus_settings[bus].scsi_bus_dead = 1; + ha->bus_settings[bus].failed_reset_count++; + } else { + spin_unlock_irq(ha->host->host_lock); + ssleep(reset_delay); + spin_lock_irq(ha->host->host_lock); + + ha->bus_settings[bus].scsi_bus_dead = 0; + ha->bus_settings[bus].failed_reset_count = 0; + ha->bus_settings[bus].reset_marker = 0; + /* Issue marker command. */ + qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL); + } + + /* + * We should probably call qla1280_set_target_parameters() + * here as well for all devices on the bus. + */ + + if (status) + dprintk(2, "qla1280_bus_reset: **** FAILED ****\n"); + else + dprintk(3, "qla1280_bus_reset: exiting normally\n"); + + return status; +} + +/* + * qla1280_device_reset + * Issue bus device reset message to the target. + * + * Input: + * ha = adapter block pointer. + * bus = SCSI BUS number. + * target = SCSI ID. + * + * Returns: + * 0 = success + */ +static int +qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + int status; + + ENTER("qla1280_device_reset"); + + mb[0] = MBC_ABORT_TARGET; + mb[1] = (bus ? (target | BIT_7) : target) << 8; + mb[2] = 1; + status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]); + + /* Issue marker command. */ + qla1280_marker(ha, bus, target, 0, MK_SYNC_ID); + + if (status) + dprintk(2, "qla1280_device_reset: **** FAILED ****\n"); + + LEAVE("qla1280_device_reset"); + return status; +} + +/* + * qla1280_abort_command + * Abort command aborts a specified IOCB. + * + * Input: + * ha = adapter block pointer. + * sp = SB structure pointer. + * + * Returns: + * 0 = success + */ +static int +qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + unsigned int bus, target, lun; + int status; + + ENTER("qla1280_abort_command"); + + bus = SCSI_BUS_32(sp->cmd); + target = SCSI_TCN_32(sp->cmd); + lun = SCSI_LUN_32(sp->cmd); + + sp->flags |= SRB_ABORT_PENDING; + + mb[0] = MBC_ABORT_COMMAND; + mb[1] = (bus ? target | BIT_7 : target) << 8 | lun; + mb[2] = handle >> 16; + mb[3] = handle & 0xffff; + status = qla1280_mailbox_command(ha, 0x0f, &mb[0]); + + if (status) { + dprintk(2, "qla1280_abort_command: **** FAILED ****\n"); + sp->flags &= ~SRB_ABORT_PENDING; + } + + + LEAVE("qla1280_abort_command"); + return status; +} + +/* + * qla1280_reset_adapter + * Reset adapter. + * + * Input: + * ha = adapter block pointer. + */ +static void +qla1280_reset_adapter(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg = ha->iobase; + + ENTER("qla1280_reset_adapter"); + + /* Disable ISP chip */ + ha->flags.online = 0; + WRT_REG_WORD(®->ictrl, ISP_RESET); + WRT_REG_WORD(®->host_cmd, + HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS); + RD_REG_WORD(®->id_l); /* Flush PCI write */ + + LEAVE("qla1280_reset_adapter"); +} + +/* + * Issue marker command. + * Function issues marker IOCB. + * + * Input: + * ha = adapter block pointer. + * bus = SCSI BUS number + * id = SCSI ID + * lun = SCSI LUN + * type = marker modifier + */ +static void +qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type) +{ + struct mrk_entry *pkt; + + ENTER("qla1280_marker"); + + /* Get request packet. */ + if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) { + pkt->entry_type = MARKER_TYPE; + pkt->lun = (uint8_t) lun; + pkt->target = (uint8_t) (bus ? (id | BIT_7) : id); + pkt->modifier = type; + pkt->entry_status = 0; + + /* Issue command to ISP */ + qla1280_isp_cmd(ha); + } + + LEAVE("qla1280_marker"); +} + + +/* + * qla1280_64bit_start_scsi + * The start SCSI is responsible for building request packets on + * request ring and modifying ISP input pointer. + * + * Input: + * ha = adapter block pointer. + * sp = SB structure pointer. + * + * Returns: + * 0 = success, was able to issue command. + */ +#ifdef QLA_64BIT_PTR +static int +qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) +{ + struct device_reg __iomem *reg = ha->iobase; + struct scsi_cmnd *cmd = sp->cmd; + cmd_a64_entry_t *pkt; + __le32 *dword_ptr; + dma_addr_t dma_handle; + int status = 0; + int cnt; + int req_cnt; + int seg_cnt; + u8 dir; + + ENTER("qla1280_64bit_start_scsi:"); + + /* Calculate number of entries and segments required. */ + req_cnt = 1; + seg_cnt = scsi_dma_map(cmd); + if (seg_cnt > 0) { + if (seg_cnt > 2) { + req_cnt += (seg_cnt - 2) / 5; + if ((seg_cnt - 2) % 5) + req_cnt++; + } + } else if (seg_cnt < 0) { + status = 1; + goto out; + } + + if ((req_cnt + 2) >= ha->req_q_cnt) { + /* Calculate number of free request entries. */ + cnt = RD_REG_WORD(®->mailbox4); + if (ha->req_ring_index < cnt) + ha->req_q_cnt = cnt - ha->req_ring_index; + else + ha->req_q_cnt = + REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); + } + + dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n", + ha->req_q_cnt, seg_cnt); + + /* If room for request in request ring. */ + if ((req_cnt + 2) >= ha->req_q_cnt) { + status = SCSI_MLQUEUE_HOST_BUSY; + dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt=" + "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt, + req_cnt); + goto out; + } + + /* Check for room in outstanding command list. */ + for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && + ha->outstanding_cmds[cnt] != NULL; cnt++); + + if (cnt >= MAX_OUTSTANDING_COMMANDS) { + status = SCSI_MLQUEUE_HOST_BUSY; + dprintk(2, "qla1280_start_scsi: NO ROOM IN " + "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt); + goto out; + } + + ha->outstanding_cmds[cnt] = sp; + ha->req_q_cnt -= req_cnt; + CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1); + + dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp, + cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd)); + dprintk(2, " bus %i, target %i, lun %i\n", + SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); + qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE); + + /* + * Build command packet. + */ + pkt = (cmd_a64_entry_t *) ha->request_ring_ptr; + + pkt->entry_type = COMMAND_A64_TYPE; + pkt->entry_count = (uint8_t) req_cnt; + pkt->sys_define = (uint8_t) ha->req_ring_index; + pkt->entry_status = 0; + pkt->handle = cpu_to_le32(cnt); + + /* Zero out remaining portion of packet. */ + memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8)); + + /* Set ISP command timeout. */ + pkt->timeout = cpu_to_le16(scsi_cmd_to_rq(cmd)->timeout / HZ); + + /* Set device target ID and LUN */ + pkt->lun = SCSI_LUN_32(cmd); + pkt->target = SCSI_BUS_32(cmd) ? + (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd); + + /* Enable simple tag queuing if device supports it. */ + if (cmd->device->simple_tags) + pkt->control_flags |= cpu_to_le16(BIT_3); + + /* Load SCSI command packet. */ + pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd)); + memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd)); + /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */ + + /* Set transfer direction. */ + dir = qla1280_data_direction(cmd); + pkt->control_flags |= cpu_to_le16(dir); + + /* Set total data segment count. */ + pkt->dseg_count = cpu_to_le16(seg_cnt); + + /* + * Load data segments. + */ + if (seg_cnt) { /* If data transfer. */ + struct scatterlist *sg, *s; + int remseg = seg_cnt; + + sg = scsi_sglist(cmd); + + /* Setup packet address segment pointer. */ + dword_ptr = (u32 *)&pkt->dseg_0_address; + + /* Load command entry data segments. */ + for_each_sg(sg, s, seg_cnt, cnt) { + if (cnt == 2) + break; + + dma_handle = sg_dma_address(s); + *dword_ptr++ = + cpu_to_le32(lower_32_bits(dma_handle)); + *dword_ptr++ = + cpu_to_le32(upper_32_bits(dma_handle)); + *dword_ptr++ = cpu_to_le32(sg_dma_len(s)); + dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n", + cpu_to_le32(upper_32_bits(dma_handle)), + cpu_to_le32(lower_32_bits(dma_handle)), + cpu_to_le32(sg_dma_len(sg_next(s)))); + remseg--; + } + dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather " + "command packet data - b %i, t %i, l %i \n", + SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), + SCSI_LUN_32(cmd)); + qla1280_dump_buffer(5, (char *)pkt, + REQUEST_ENTRY_SIZE); + + /* + * Build continuation packets. + */ + dprintk(3, "S/G Building Continuation...seg_cnt=0x%x " + "remains\n", seg_cnt); + + while (remseg > 0) { + /* Update sg start */ + sg = s; + /* Adjust ring index. */ + ha->req_ring_index++; + if (ha->req_ring_index == REQUEST_ENTRY_CNT) { + ha->req_ring_index = 0; + ha->request_ring_ptr = + ha->request_ring; + } else + ha->request_ring_ptr++; + + pkt = (cmd_a64_entry_t *)ha->request_ring_ptr; + + /* Zero out packet. */ + memset(pkt, 0, REQUEST_ENTRY_SIZE); + + /* Load packet defaults. */ + ((struct cont_a64_entry *) pkt)->entry_type = + CONTINUE_A64_TYPE; + ((struct cont_a64_entry *) pkt)->entry_count = 1; + ((struct cont_a64_entry *) pkt)->sys_define = + (uint8_t)ha->req_ring_index; + /* Setup packet address segment pointer. */ + dword_ptr = + (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address; + + /* Load continuation entry data segments. */ + for_each_sg(sg, s, remseg, cnt) { + if (cnt == 5) + break; + dma_handle = sg_dma_address(s); + *dword_ptr++ = + cpu_to_le32(lower_32_bits(dma_handle)); + *dword_ptr++ = + cpu_to_le32(upper_32_bits(dma_handle)); + *dword_ptr++ = + cpu_to_le32(sg_dma_len(s)); + dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n", + cpu_to_le32(upper_32_bits(dma_handle)), + cpu_to_le32(lower_32_bits(dma_handle)), + cpu_to_le32(sg_dma_len(s))); + } + remseg -= cnt; + dprintk(5, "qla1280_64bit_start_scsi: " + "continuation packet data - b %i, t " + "%i, l %i \n", SCSI_BUS_32(cmd), + SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); + qla1280_dump_buffer(5, (char *)pkt, + REQUEST_ENTRY_SIZE); + } + } else { /* No data transfer */ + dprintk(5, "qla1280_64bit_start_scsi: No data, command " + "packet data - b %i, t %i, l %i \n", + SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); + qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); + } + /* Adjust ring index. */ + ha->req_ring_index++; + if (ha->req_ring_index == REQUEST_ENTRY_CNT) { + ha->req_ring_index = 0; + ha->request_ring_ptr = ha->request_ring; + } else + ha->request_ring_ptr++; + + /* Set chip new ring index. */ + dprintk(2, + "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n"); + sp->flags |= SRB_SENT; + ha->actthreads++; + WRT_REG_WORD(®->mailbox4, ha->req_ring_index); + + out: + if (status) + dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n"); + else + dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n"); + + return status; +} +#else /* !QLA_64BIT_PTR */ + +/* + * qla1280_32bit_start_scsi + * The start SCSI is responsible for building request packets on + * request ring and modifying ISP input pointer. + * + * The Qlogic firmware interface allows every queue slot to have a SCSI + * command and up to 4 scatter/gather (SG) entries. If we need more + * than 4 SG entries, then continuation entries are used that can + * hold another 7 entries each. The start routine determines if there + * is eought empty slots then build the combination of requests to + * fulfill the OS request. + * + * Input: + * ha = adapter block pointer. + * sp = SCSI Request Block structure pointer. + * + * Returns: + * 0 = success, was able to issue command. + */ +static int +qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) +{ + struct device_reg __iomem *reg = ha->iobase; + struct scsi_cmnd *cmd = sp->cmd; + struct cmd_entry *pkt; + __le32 *dword_ptr; + int status = 0; + int cnt; + int req_cnt; + int seg_cnt; + u8 dir; + + ENTER("qla1280_32bit_start_scsi"); + + dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp, + cmd->cmnd[0]); + + /* Calculate number of entries and segments required. */ + req_cnt = 1; + seg_cnt = scsi_dma_map(cmd); + if (seg_cnt) { + /* + * if greater than four sg entries then we need to allocate + * continuation entries + */ + if (seg_cnt > 4) { + req_cnt += (seg_cnt - 4) / 7; + if ((seg_cnt - 4) % 7) + req_cnt++; + } + dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n", + cmd, seg_cnt, req_cnt); + } else if (seg_cnt < 0) { + status = 1; + goto out; + } + + if ((req_cnt + 2) >= ha->req_q_cnt) { + /* Calculate number of free request entries. */ + cnt = RD_REG_WORD(®->mailbox4); + if (ha->req_ring_index < cnt) + ha->req_q_cnt = cnt - ha->req_ring_index; + else + ha->req_q_cnt = + REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); + } + + dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n", + ha->req_q_cnt, seg_cnt); + /* If room for request in request ring. */ + if ((req_cnt + 2) >= ha->req_q_cnt) { + status = SCSI_MLQUEUE_HOST_BUSY; + dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, " + "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index, + ha->req_q_cnt, req_cnt); + goto out; + } + + /* Check for empty slot in outstanding command list. */ + for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && + ha->outstanding_cmds[cnt]; cnt++); + + if (cnt >= MAX_OUTSTANDING_COMMANDS) { + status = SCSI_MLQUEUE_HOST_BUSY; + dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING " + "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt); + goto out; + } + + CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1); + ha->outstanding_cmds[cnt] = sp; + ha->req_q_cnt -= req_cnt; + + /* + * Build command packet. + */ + pkt = (struct cmd_entry *) ha->request_ring_ptr; + + pkt->entry_type = COMMAND_TYPE; + pkt->entry_count = (uint8_t) req_cnt; + pkt->sys_define = (uint8_t) ha->req_ring_index; + pkt->entry_status = 0; + pkt->handle = cpu_to_le32(cnt); + + /* Zero out remaining portion of packet. */ + memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8)); + + /* Set ISP command timeout. */ + pkt->timeout = cpu_to_le16(scsi_cmd_to_rq(cmd)->timeout / HZ); + + /* Set device target ID and LUN */ + pkt->lun = SCSI_LUN_32(cmd); + pkt->target = SCSI_BUS_32(cmd) ? + (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd); + + /* Enable simple tag queuing if device supports it. */ + if (cmd->device->simple_tags) + pkt->control_flags |= cpu_to_le16(BIT_3); + + /* Load SCSI command packet. */ + pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd)); + memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd)); + + /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */ + /* Set transfer direction. */ + dir = qla1280_data_direction(cmd); + pkt->control_flags |= cpu_to_le16(dir); + + /* Set total data segment count. */ + pkt->dseg_count = cpu_to_le16(seg_cnt); + + /* + * Load data segments. + */ + if (seg_cnt) { + struct scatterlist *sg, *s; + int remseg = seg_cnt; + + sg = scsi_sglist(cmd); + + /* Setup packet address segment pointer. */ + dword_ptr = &pkt->dseg_0_address; + + dprintk(3, "Building S/G data segments..\n"); + qla1280_dump_buffer(1, (char *)sg, 4 * 16); + + /* Load command entry data segments. */ + for_each_sg(sg, s, seg_cnt, cnt) { + if (cnt == 4) + break; + *dword_ptr++ = + cpu_to_le32(lower_32_bits(sg_dma_address(s))); + *dword_ptr++ = cpu_to_le32(sg_dma_len(s)); + dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n", + (lower_32_bits(sg_dma_address(s))), + (sg_dma_len(s))); + remseg--; + } + /* + * Build continuation packets. + */ + dprintk(3, "S/G Building Continuation" + "...seg_cnt=0x%x remains\n", seg_cnt); + while (remseg > 0) { + /* Continue from end point */ + sg = s; + /* Adjust ring index. */ + ha->req_ring_index++; + if (ha->req_ring_index == REQUEST_ENTRY_CNT) { + ha->req_ring_index = 0; + ha->request_ring_ptr = + ha->request_ring; + } else + ha->request_ring_ptr++; + + pkt = (struct cmd_entry *)ha->request_ring_ptr; + + /* Zero out packet. */ + memset(pkt, 0, REQUEST_ENTRY_SIZE); + + /* Load packet defaults. */ + ((struct cont_entry *) pkt)-> + entry_type = CONTINUE_TYPE; + ((struct cont_entry *) pkt)->entry_count = 1; + + ((struct cont_entry *) pkt)->sys_define = + (uint8_t) ha->req_ring_index; + + /* Setup packet address segment pointer. */ + dword_ptr = + &((struct cont_entry *) pkt)->dseg_0_address; + + /* Load continuation entry data segments. */ + for_each_sg(sg, s, remseg, cnt) { + if (cnt == 7) + break; + *dword_ptr++ = + cpu_to_le32(lower_32_bits(sg_dma_address(s))); + *dword_ptr++ = + cpu_to_le32(sg_dma_len(s)); + dprintk(1, + "S/G Segment Cont. phys_addr=0x%x, " + "len=0x%x\n", + cpu_to_le32(lower_32_bits(sg_dma_address(s))), + cpu_to_le32(sg_dma_len(s))); + } + remseg -= cnt; + dprintk(5, "qla1280_32bit_start_scsi: " + "continuation packet data - " + "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd), + SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); + qla1280_dump_buffer(5, (char *)pkt, + REQUEST_ENTRY_SIZE); + } + } else { /* No data transfer at all */ + dprintk(5, "qla1280_32bit_start_scsi: No data, command " + "packet data - \n"); + qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); + } + dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n"); + qla1280_dump_buffer(5, (char *)ha->request_ring_ptr, + REQUEST_ENTRY_SIZE); + + /* Adjust ring index. */ + ha->req_ring_index++; + if (ha->req_ring_index == REQUEST_ENTRY_CNT) { + ha->req_ring_index = 0; + ha->request_ring_ptr = ha->request_ring; + } else + ha->request_ring_ptr++; + + /* Set chip new ring index. */ + dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC " + "for pending command\n"); + sp->flags |= SRB_SENT; + ha->actthreads++; + WRT_REG_WORD(®->mailbox4, ha->req_ring_index); + +out: + if (status) + dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n"); + + LEAVE("qla1280_32bit_start_scsi"); + + return status; +} +#endif + +/* + * qla1280_req_pkt + * Function is responsible for locking ring and + * getting a zeroed out request packet. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * 0 = failed to get slot. + */ +static request_t * +qla1280_req_pkt(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg = ha->iobase; + request_t *pkt = NULL; + int cnt; + uint32_t timer; + + ENTER("qla1280_req_pkt"); + + /* + * This can be called from interrupt context, damn it!!! + */ + /* Wait for 30 seconds for slot. */ + for (timer = 15000000; timer; timer--) { + if (ha->req_q_cnt > 0) { + /* Calculate number of free request entries. */ + cnt = RD_REG_WORD(®->mailbox4); + if (ha->req_ring_index < cnt) + ha->req_q_cnt = cnt - ha->req_ring_index; + else + ha->req_q_cnt = + REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); + } + + /* Found empty request ring slot? */ + if (ha->req_q_cnt > 0) { + ha->req_q_cnt--; + pkt = ha->request_ring_ptr; + + /* Zero out packet. */ + memset(pkt, 0, REQUEST_ENTRY_SIZE); + + /* + * How can this be right when we have a ring + * size of 512??? + */ + /* Set system defined field. */ + pkt->sys_define = (uint8_t) ha->req_ring_index; + + /* Set entry count. */ + pkt->entry_count = 1; + + break; + } + + udelay(2); /* 10 */ + + /* Check for pending interrupts. */ + qla1280_poll(ha); + } + + if (!pkt) + dprintk(2, "qla1280_req_pkt: **** FAILED ****\n"); + else + dprintk(3, "qla1280_req_pkt: exiting normally\n"); + + return pkt; +} + +/* + * qla1280_isp_cmd + * Function is responsible for modifying ISP input pointer. + * Releases ring lock. + * + * Input: + * ha = adapter block pointer. + */ +static void +qla1280_isp_cmd(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg = ha->iobase; + + ENTER("qla1280_isp_cmd"); + + dprintk(5, "qla1280_isp_cmd: IOCB data:\n"); + qla1280_dump_buffer(5, (char *)ha->request_ring_ptr, + REQUEST_ENTRY_SIZE); + + /* Adjust ring index. */ + ha->req_ring_index++; + if (ha->req_ring_index == REQUEST_ENTRY_CNT) { + ha->req_ring_index = 0; + ha->request_ring_ptr = ha->request_ring; + } else + ha->request_ring_ptr++; + + /* + * Update request index to mailbox4 (Request Queue In). + */ + WRT_REG_WORD(®->mailbox4, ha->req_ring_index); + + LEAVE("qla1280_isp_cmd"); +} + +/****************************************************************************/ +/* Interrupt Service Routine. */ +/****************************************************************************/ + +/**************************************************************************** + * qla1280_isr + * Calls I/O done on command completion. + * + * Input: + * ha = adapter block pointer. + * done_q = done queue. + ****************************************************************************/ +static void +qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q) +{ + struct device_reg __iomem *reg = ha->iobase; + struct response *pkt; + struct srb *sp = NULL; + uint16_t mailbox[MAILBOX_REGISTER_COUNT]; + uint16_t *wptr; + uint32_t index; + u16 istatus; + + ENTER("qla1280_isr"); + + istatus = RD_REG_WORD(®->istatus); + if (!(istatus & (RISC_INT | PCI_INT))) + return; + + /* Save mailbox register 5 */ + mailbox[5] = RD_REG_WORD(®->mailbox5); + + /* Check for mailbox interrupt. */ + + mailbox[0] = RD_REG_WORD_dmasync(®->semaphore); + + if (mailbox[0] & BIT_0) { + /* Get mailbox data. */ + /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */ + + wptr = &mailbox[0]; + *wptr++ = RD_REG_WORD(®->mailbox0); + *wptr++ = RD_REG_WORD(®->mailbox1); + *wptr = RD_REG_WORD(®->mailbox2); + if (mailbox[0] != MBA_SCSI_COMPLETION) { + wptr++; + *wptr++ = RD_REG_WORD(®->mailbox3); + *wptr++ = RD_REG_WORD(®->mailbox4); + wptr++; + *wptr++ = RD_REG_WORD(®->mailbox6); + *wptr = RD_REG_WORD(®->mailbox7); + } + + /* Release mailbox registers. */ + + WRT_REG_WORD(®->semaphore, 0); + WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT); + + dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x", + mailbox[0]); + + /* Handle asynchronous event */ + switch (mailbox[0]) { + case MBA_SCSI_COMPLETION: /* Response completion */ + dprintk(5, "qla1280_isr: mailbox SCSI response " + "completion\n"); + + if (ha->flags.online) { + /* Get outstanding command index. */ + index = mailbox[2] << 16 | mailbox[1]; + + /* Validate handle. */ + if (index < MAX_OUTSTANDING_COMMANDS) + sp = ha->outstanding_cmds[index]; + else + sp = NULL; + + if (sp) { + /* Free outstanding command slot. */ + ha->outstanding_cmds[index] = NULL; + + /* Save ISP completion status */ + CMD_RESULT(sp->cmd) = 0; + CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE; + + /* Place block on done queue */ + list_add_tail(&sp->list, done_q); + } else { + /* + * If we get here we have a real problem! + */ + printk(KERN_WARNING + "qla1280: ISP invalid handle\n"); + } + } + break; + + case MBA_BUS_RESET: /* SCSI Bus Reset */ + ha->flags.reset_marker = 1; + index = mailbox[6] & BIT_0; + ha->bus_settings[index].reset_marker = 1; + + printk(KERN_DEBUG "qla1280_isr(): index %i " + "asynchronous BUS_RESET\n", index); + break; + + case MBA_SYSTEM_ERR: /* System Error */ + printk(KERN_WARNING + "qla1280: ISP System Error - mbx1=%xh, mbx2=" + "%xh, mbx3=%xh\n", mailbox[1], mailbox[2], + mailbox[3]); + break; + + case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */ + printk(KERN_WARNING + "qla1280: ISP Request Transfer Error\n"); + break; + + case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */ + printk(KERN_WARNING + "qla1280: ISP Response Transfer Error\n"); + break; + + case MBA_WAKEUP_THRES: /* Request Queue Wake-up */ + dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n"); + break; + + case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */ + dprintk(2, + "qla1280_isr: asynchronous TIMEOUT_RESET\n"); + break; + + case MBA_DEVICE_RESET: /* Bus Device Reset */ + printk(KERN_INFO "qla1280_isr(): asynchronous " + "BUS_DEVICE_RESET\n"); + + ha->flags.reset_marker = 1; + index = mailbox[6] & BIT_0; + ha->bus_settings[index].reset_marker = 1; + break; + + case MBA_BUS_MODE_CHANGE: + dprintk(2, + "qla1280_isr: asynchronous BUS_MODE_CHANGE\n"); + break; + + default: + /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */ + if (mailbox[0] < MBA_ASYNC_EVENT) { + wptr = &mailbox[0]; + memcpy((uint16_t *) ha->mailbox_out, wptr, + MAILBOX_REGISTER_COUNT * + sizeof(uint16_t)); + + if(ha->mailbox_wait != NULL) + complete(ha->mailbox_wait); + } + break; + } + } else { + WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT); + } + + /* + * We will receive interrupts during mailbox testing prior to + * the card being marked online, hence the double check. + */ + if (!(ha->flags.online && !ha->mailbox_wait)) { + dprintk(2, "qla1280_isr: Response pointer Error\n"); + goto out; + } + + if (mailbox[5] >= RESPONSE_ENTRY_CNT) + goto out; + + while (ha->rsp_ring_index != mailbox[5]) { + pkt = ha->response_ring_ptr; + + dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]" + " = 0x%x\n", ha->rsp_ring_index, mailbox[5]); + dprintk(5,"qla1280_isr: response packet data\n"); + qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE); + + if (pkt->entry_type == STATUS_TYPE) { + if ((le16_to_cpu(pkt->scsi_status) & 0xff) + || pkt->comp_status || pkt->entry_status) { + dprintk(2, "qla1280_isr: ha->rsp_ring_index = " + "0x%x mailbox[5] = 0x%x, comp_status " + "= 0x%x, scsi_status = 0x%x\n", + ha->rsp_ring_index, mailbox[5], + le16_to_cpu(pkt->comp_status), + le16_to_cpu(pkt->scsi_status)); + } + } else { + dprintk(2, "qla1280_isr: ha->rsp_ring_index = " + "0x%x, mailbox[5] = 0x%x\n", + ha->rsp_ring_index, mailbox[5]); + dprintk(2, "qla1280_isr: response packet data\n"); + qla1280_dump_buffer(2, (char *)pkt, + RESPONSE_ENTRY_SIZE); + } + + if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) { + dprintk(2, "status: Cmd %p, handle %i\n", + ha->outstanding_cmds[pkt->handle]->cmd, + pkt->handle); + if (pkt->entry_type == STATUS_TYPE) + qla1280_status_entry(ha, pkt, done_q); + else + qla1280_error_entry(ha, pkt, done_q); + /* Adjust ring index. */ + ha->rsp_ring_index++; + if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) { + ha->rsp_ring_index = 0; + ha->response_ring_ptr = ha->response_ring; + } else + ha->response_ring_ptr++; + WRT_REG_WORD(®->mailbox5, ha->rsp_ring_index); + } + } + + out: + LEAVE("qla1280_isr"); +} + +/* + * qla1280_rst_aen + * Processes asynchronous reset. + * + * Input: + * ha = adapter block pointer. + */ +static void +qla1280_rst_aen(struct scsi_qla_host *ha) +{ + uint8_t bus; + + ENTER("qla1280_rst_aen"); + + if (ha->flags.online && !ha->flags.reset_active && + !ha->flags.abort_isp_active) { + ha->flags.reset_active = 1; + while (ha->flags.reset_marker) { + /* Issue marker command. */ + ha->flags.reset_marker = 0; + for (bus = 0; bus < ha->ports && + !ha->flags.reset_marker; bus++) { + if (ha->bus_settings[bus].reset_marker) { + ha->bus_settings[bus].reset_marker = 0; + qla1280_marker(ha, bus, 0, 0, + MK_SYNC_ALL); + } + } + } + } + + LEAVE("qla1280_rst_aen"); +} + + +/* + * qla1280_status_entry + * Processes received ISP status entry. + * + * Input: + * ha = adapter block pointer. + * pkt = entry pointer. + * done_q = done queue. + */ +static void +qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt, + struct list_head *done_q) +{ + int sense_sz; + struct srb *sp; + struct scsi_cmnd *cmd; + uint32_t handle = le32_to_cpu(pkt->handle); + uint16_t scsi_status = le16_to_cpu(pkt->scsi_status); + uint16_t comp_status = le16_to_cpu(pkt->comp_status); + + ENTER("qla1280_status_entry"); + + /* Validate handle. */ + if (handle < MAX_OUTSTANDING_COMMANDS) + sp = ha->outstanding_cmds[handle]; + else + sp = NULL; + + if (!sp) { + printk(KERN_WARNING "qla1280: Status Entry invalid handle\n"); + goto out; + } + + /* Free outstanding command slot. */ + ha->outstanding_cmds[handle] = NULL; + + cmd = sp->cmd; + + if (comp_status || scsi_status) { + dprintk(3, "scsi: comp_status = 0x%x, scsi_status = " + "0x%x, handle = 0x%x\n", comp_status, + scsi_status, handle); + } + + /* Target busy or queue full */ + if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL || + (scsi_status & 0xFF) == SAM_STAT_BUSY) { + CMD_RESULT(cmd) = scsi_status & 0xff; + } else { + + /* Save ISP completion status */ + CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd); + + if (scsi_status & SAM_STAT_CHECK_CONDITION) { + if (comp_status != CS_ARS_FAILED) { + uint16_t req_sense_length = + le16_to_cpu(pkt->req_sense_length); + if (req_sense_length < CMD_SNSLEN(cmd)) + sense_sz = req_sense_length; + else + /* + * scsi_cmnd->sense_buffer is + * 64 bytes, why only copy 63? + * This looks wrong! /Jes + */ + sense_sz = CMD_SNSLEN(cmd) - 1; + + memcpy(cmd->sense_buffer, + &pkt->req_sense_data, sense_sz); + } else + sense_sz = 0; + memset(cmd->sense_buffer + sense_sz, 0, + SCSI_SENSE_BUFFERSIZE - sense_sz); + + dprintk(2, "qla1280_status_entry: Check " + "condition Sense data, b %i, t %i, " + "l %i\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), + SCSI_LUN_32(cmd)); + if (sense_sz) + qla1280_dump_buffer(2, + (char *)cmd->sense_buffer, + sense_sz); + } + } + + CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE; + + /* Place command on done queue. */ + list_add_tail(&sp->list, done_q); + out: + LEAVE("qla1280_status_entry"); +} + +/* + * qla1280_error_entry + * Processes error entry. + * + * Input: + * ha = adapter block pointer. + * pkt = entry pointer. + * done_q = done queue. + */ +static void +qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt, + struct list_head *done_q) +{ + struct srb *sp; + uint32_t handle = le32_to_cpu(pkt->handle); + + ENTER("qla1280_error_entry"); + + if (pkt->entry_status & BIT_3) + dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n"); + else if (pkt->entry_status & BIT_2) + dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n"); + else if (pkt->entry_status & BIT_1) + dprintk(2, "qla1280_error_entry: FULL flag error\n"); + else + dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n"); + + /* Validate handle. */ + if (handle < MAX_OUTSTANDING_COMMANDS) + sp = ha->outstanding_cmds[handle]; + else + sp = NULL; + + if (sp) { + /* Free outstanding command slot. */ + ha->outstanding_cmds[handle] = NULL; + + /* Bad payload or header */ + if (pkt->entry_status & (BIT_3 + BIT_2)) { + /* Bad payload or header, set error status. */ + /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */ + CMD_RESULT(sp->cmd) = DID_ERROR << 16; + } else if (pkt->entry_status & BIT_1) { /* FULL flag */ + CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16; + } else { + /* Set error status. */ + CMD_RESULT(sp->cmd) = DID_ERROR << 16; + } + + CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE; + + /* Place command on done queue. */ + list_add_tail(&sp->list, done_q); + } +#ifdef QLA_64BIT_PTR + else if (pkt->entry_type == COMMAND_A64_TYPE) { + printk(KERN_WARNING "!qla1280: Error Entry invalid handle"); + } +#endif + + LEAVE("qla1280_error_entry"); +} + +/* + * qla1280_abort_isp + * Resets ISP and aborts all outstanding commands. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * 0 = success + */ +static int +qla1280_abort_isp(struct scsi_qla_host *ha) +{ + struct device_reg __iomem *reg = ha->iobase; + struct srb *sp; + int status = 0; + int cnt; + int bus; + + ENTER("qla1280_abort_isp"); + + if (ha->flags.abort_isp_active || !ha->flags.online) + goto out; + + ha->flags.abort_isp_active = 1; + + /* Disable ISP interrupts. */ + qla1280_disable_intrs(ha); + WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC); + RD_REG_WORD(®->id_l); + + printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n", + ha->host_no); + /* Dequeue all commands in outstanding command list. */ + for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + struct scsi_cmnd *cmd; + sp = ha->outstanding_cmds[cnt]; + if (sp) { + cmd = sp->cmd; + CMD_RESULT(cmd) = DID_RESET << 16; + CMD_HANDLE(cmd) = COMPLETED_HANDLE; + ha->outstanding_cmds[cnt] = NULL; + list_add_tail(&sp->list, &ha->done_q); + } + } + + qla1280_done(ha); + + status = qla1280_load_firmware(ha); + if (status) + goto out; + + /* Setup adapter based on NVRAM parameters. */ + qla1280_nvram_config (ha); + + status = qla1280_init_rings(ha); + if (status) + goto out; + + /* Issue SCSI reset. */ + for (bus = 0; bus < ha->ports; bus++) + qla1280_bus_reset(ha, bus); + + ha->flags.abort_isp_active = 0; + out: + if (status) { + printk(KERN_WARNING + "qla1280: ISP error recovery failed, board disabled"); + qla1280_reset_adapter(ha); + dprintk(2, "qla1280_abort_isp: **** FAILED ****\n"); + } + + LEAVE("qla1280_abort_isp"); + return status; +} + + +/* + * qla1280_debounce_register + * Debounce register. + * + * Input: + * port = register address. + * + * Returns: + * register value. + */ +static u16 +qla1280_debounce_register(volatile u16 __iomem * addr) +{ + volatile u16 ret; + volatile u16 ret2; + + ret = RD_REG_WORD(addr); + ret2 = RD_REG_WORD(addr); + + if (ret == ret2) + return ret; + + do { + cpu_relax(); + ret = RD_REG_WORD(addr); + ret2 = RD_REG_WORD(addr); + } while (ret != ret2); + + return ret; +} + + +/************************************************************************ + * qla1280_check_for_dead_scsi_bus * + * * + * This routine checks for a dead SCSI bus * + ************************************************************************/ +#define SET_SXP_BANK 0x0100 +#define SCSI_PHASE_INVALID 0x87FF +static int +qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus) +{ + uint16_t config_reg, scsi_control; + struct device_reg __iomem *reg = ha->iobase; + + if (ha->bus_settings[bus].scsi_bus_dead) { + WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC); + config_reg = RD_REG_WORD(®->cfg_1); + WRT_REG_WORD(®->cfg_1, SET_SXP_BANK); + scsi_control = RD_REG_WORD(®->scsiControlPins); + WRT_REG_WORD(®->cfg_1, config_reg); + WRT_REG_WORD(®->host_cmd, HC_RELEASE_RISC); + + if (scsi_control == SCSI_PHASE_INVALID) { + ha->bus_settings[bus].scsi_bus_dead = 1; + return 1; /* bus is dead */ + } else { + ha->bus_settings[bus].scsi_bus_dead = 0; + ha->bus_settings[bus].failed_reset_count = 0; + } + } + return 0; /* bus is not dead */ +} + +static void +qla1280_get_target_parameters(struct scsi_qla_host *ha, + struct scsi_device *device) +{ + uint16_t mb[MAILBOX_REGISTER_COUNT]; + int bus, target, lun; + + bus = device->channel; + target = device->id; + lun = device->lun; + + + mb[0] = MBC_GET_TARGET_PARAMETERS; + mb[1] = (uint16_t) (bus ? target | BIT_7 : target); + mb[1] <<= 8; + qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0, + &mb[0]); + + printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun); + + if (mb[3] != 0) { + printk(KERN_CONT " Sync: period %d, offset %d", + (mb[3] & 0xff), (mb[3] >> 8)); + if (mb[2] & BIT_13) + printk(KERN_CONT ", Wide"); + if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2) + printk(KERN_CONT ", DT"); + } else + printk(KERN_CONT " Async"); + + if (device->simple_tags) + printk(KERN_CONT ", Tagged queuing: depth %d", device->queue_depth); + printk(KERN_CONT "\n"); +} + + +#if DEBUG_QLA1280 +static void +__qla1280_dump_buffer(char *b, int size) +{ + int cnt; + u8 c; + + printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah " + "Bh Ch Dh Eh Fh\n"); + printk(KERN_DEBUG "---------------------------------------------" + "------------------\n"); + + for (cnt = 0; cnt < size;) { + c = *b++; + + printk("0x%02x", c); + cnt++; + if (!(cnt % 16)) + printk("\n"); + else + printk(" "); + } + if (cnt % 16) + printk("\n"); +} + +/************************************************************************** + * ql1280_print_scsi_cmd + * + **************************************************************************/ +static void +__qla1280_print_scsi_cmd(struct scsi_cmnd *cmd) +{ + struct scsi_qla_host *ha; + struct Scsi_Host *host = CMD_HOST(cmd); + struct srb *sp; + /* struct scatterlist *sg; */ + + int i; + ha = (struct scsi_qla_host *)host->hostdata; + + sp = scsi_cmd_priv(cmd); + printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd)); + printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n", + SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd), + CMD_CDBLEN(cmd)); + printk(" CDB = "); + for (i = 0; i < cmd->cmd_len; i++) { + printk("0x%02x ", cmd->cmnd[i]); + } + printk(" seg_cnt =%d\n", scsi_sg_count(cmd)); + printk(" request buffer=0x%p, request buffer len=0x%x\n", + scsi_sglist(cmd), scsi_bufflen(cmd)); + /* if (cmd->use_sg) + { + sg = (struct scatterlist *) cmd->request_buffer; + printk(" SG buffer: \n"); + qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist))); + } */ + printk(" tag=%d, transfersize=0x%x \n", + scsi_cmd_to_rq(cmd)->tag, cmd->transfersize); + printk(" underflow size = 0x%x, direction=0x%x\n", + cmd->underflow, cmd->sc_data_direction); +} + +/************************************************************************** + * ql1280_dump_device + * + **************************************************************************/ +static void +ql1280_dump_device(struct scsi_qla_host *ha) +{ + + struct scsi_cmnd *cp; + struct srb *sp; + int i; + + printk(KERN_DEBUG "Outstanding Commands on controller:\n"); + + for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) { + if ((sp = ha->outstanding_cmds[i]) == NULL) + continue; + if ((cp = sp->cmd) == NULL) + continue; + qla1280_print_scsi_cmd(1, cp); + } +} +#endif + + +enum tokens { + TOKEN_NVRAM, + TOKEN_SYNC, + TOKEN_WIDE, + TOKEN_PPR, + TOKEN_VERBOSE, + TOKEN_DEBUG, +}; + +struct setup_tokens { + char *token; + int val; +}; + +static struct setup_tokens setup_token[] __initdata = +{ + { "nvram", TOKEN_NVRAM }, + { "sync", TOKEN_SYNC }, + { "wide", TOKEN_WIDE }, + { "ppr", TOKEN_PPR }, + { "verbose", TOKEN_VERBOSE }, + { "debug", TOKEN_DEBUG }, +}; + + +/************************************************************************** + * qla1280_setup + * + * Handle boot parameters. This really needs to be changed so one + * can specify per adapter parameters. + **************************************************************************/ +static int __init +qla1280_setup(char *s) +{ + char *cp, *ptr; + unsigned long val; + + cp = s; + + while (cp && (ptr = strchr(cp, ':'))) { + ptr++; + if (!strcmp(ptr, "yes")) { + val = 0x10000; + ptr += 3; + } else if (!strcmp(ptr, "no")) { + val = 0; + ptr += 2; + } else + val = simple_strtoul(ptr, &ptr, 0); + + switch (qla1280_get_token(cp)) { + case TOKEN_NVRAM: + if (!val) + driver_setup.no_nvram = 1; + break; + case TOKEN_SYNC: + if (!val) + driver_setup.no_sync = 1; + else if (val != 0x10000) + driver_setup.sync_mask = val; + break; + case TOKEN_WIDE: + if (!val) + driver_setup.no_wide = 1; + else if (val != 0x10000) + driver_setup.wide_mask = val; + break; + case TOKEN_PPR: + if (!val) + driver_setup.no_ppr = 1; + else if (val != 0x10000) + driver_setup.ppr_mask = val; + break; + case TOKEN_VERBOSE: + qla1280_verbose = val; + break; + default: + printk(KERN_INFO "qla1280: unknown boot option %s\n", + cp); + } + + cp = strchr(ptr, ';'); + if (cp) + cp++; + else { + break; + } + } + return 1; +} + + +static int __init +qla1280_get_token(char *str) +{ + char *sep; + long ret = -1; + int i; + + sep = strchr(str, ':'); + + if (sep) { + for (i = 0; i < ARRAY_SIZE(setup_token); i++) { + if (!strncmp(setup_token[i].token, str, (sep - str))) { + ret = setup_token[i].val; + break; + } + } + } + + return ret; +} + + +static struct scsi_host_template qla1280_driver_template = { + .module = THIS_MODULE, + .proc_name = "qla1280", + .name = "Qlogic ISP 1280/12160", + .info = qla1280_info, + .slave_configure = qla1280_slave_configure, + .queuecommand = qla1280_queuecommand, + .eh_abort_handler = qla1280_eh_abort, + .eh_device_reset_handler= qla1280_eh_device_reset, + .eh_bus_reset_handler = qla1280_eh_bus_reset, + .eh_host_reset_handler = qla1280_eh_adapter_reset, + .bios_param = qla1280_biosparam, + .can_queue = MAX_OUTSTANDING_COMMANDS, + .this_id = -1, + .sg_tablesize = SG_ALL, + .cmd_size = sizeof(struct srb), +}; + + +static int +qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int devnum = id->driver_data; + struct qla_boards *bdp = &ql1280_board_tbl[devnum]; + struct Scsi_Host *host; + struct scsi_qla_host *ha; + int error = -ENODEV; + + /* Bypass all AMI SUBSYS VENDOR IDs */ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) { + printk(KERN_INFO + "qla1280: Skipping AMI SubSys Vendor ID Chip\n"); + goto error; + } + + printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n", + bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn)); + + if (pci_enable_device(pdev)) { + printk(KERN_WARNING + "qla1280: Failed to enabled pci device, aborting.\n"); + goto error; + } + + pci_set_master(pdev); + + error = -ENOMEM; + host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha)); + if (!host) { + printk(KERN_WARNING + "qla1280: Failed to register host, aborting.\n"); + goto error_disable_device; + } + + ha = (struct scsi_qla_host *)host->hostdata; + memset(ha, 0, sizeof(struct scsi_qla_host)); + + ha->pdev = pdev; + ha->devnum = devnum; /* specifies microcode load address */ + +#ifdef QLA_64BIT_PTR + if (dma_set_mask_and_coherent(&ha->pdev->dev, DMA_BIT_MASK(64))) { + if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) { + printk(KERN_WARNING "scsi(%li): Unable to set a " + "suitable DMA mask - aborting\n", ha->host_no); + error = -ENODEV; + goto error_put_host; + } + } else + dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n", + ha->host_no); +#else + if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) { + printk(KERN_WARNING "scsi(%li): Unable to set a " + "suitable DMA mask - aborting\n", ha->host_no); + error = -ENODEV; + goto error_put_host; + } +#endif + + ha->request_ring = dma_alloc_coherent(&ha->pdev->dev, + ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)), + &ha->request_dma, GFP_KERNEL); + if (!ha->request_ring) { + printk(KERN_INFO "qla1280: Failed to get request memory\n"); + goto error_put_host; + } + + ha->response_ring = dma_alloc_coherent(&ha->pdev->dev, + ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)), + &ha->response_dma, GFP_KERNEL); + if (!ha->response_ring) { + printk(KERN_INFO "qla1280: Failed to get response memory\n"); + goto error_free_request_ring; + } + + ha->ports = bdp->numPorts; + + ha->host = host; + ha->host_no = host->host_no; + + host->irq = pdev->irq; + host->max_channel = bdp->numPorts - 1; + host->max_lun = MAX_LUNS - 1; + host->max_id = MAX_TARGETS; + host->max_sectors = 1024; + host->unique_id = host->host_no; + + error = -ENODEV; + +#if MEMORY_MAPPED_IO + ha->mmpbase = pci_ioremap_bar(ha->pdev, 1); + if (!ha->mmpbase) { + printk(KERN_INFO "qla1280: Unable to map I/O memory\n"); + goto error_free_response_ring; + } + + host->base = (unsigned long)ha->mmpbase; + ha->iobase = (struct device_reg __iomem *)ha->mmpbase; +#else + host->io_port = pci_resource_start(ha->pdev, 0); + if (!request_region(host->io_port, 0xff, "qla1280")) { + printk(KERN_INFO "qla1280: Failed to reserve i/o region " + "0x%04lx-0x%04lx - already in use\n", + host->io_port, host->io_port + 0xff); + goto error_free_response_ring; + } + + ha->iobase = (struct device_reg *)host->io_port; +#endif + + INIT_LIST_HEAD(&ha->done_q); + + /* Disable ISP interrupts. */ + qla1280_disable_intrs(ha); + + if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED, + "qla1280", ha)) { + printk("qla1280 : Failed to reserve interrupt %d already " + "in use\n", pdev->irq); + goto error_release_region; + } + + /* load the F/W, read paramaters, and init the H/W */ + if (qla1280_initialize_adapter(ha)) { + printk(KERN_INFO "qla1x160: Failed to initialize adapter\n"); + goto error_free_irq; + } + + /* set our host ID (need to do something about our two IDs) */ + host->this_id = ha->bus_settings[0].id; + + pci_set_drvdata(pdev, host); + + error = scsi_add_host(host, &pdev->dev); + if (error) + goto error_disable_adapter; + scsi_scan_host(host); + + return 0; + + error_disable_adapter: + qla1280_disable_intrs(ha); + error_free_irq: + free_irq(pdev->irq, ha); + error_release_region: +#if MEMORY_MAPPED_IO + iounmap(ha->mmpbase); +#else + release_region(host->io_port, 0xff); +#endif + error_free_response_ring: + dma_free_coherent(&ha->pdev->dev, + ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)), + ha->response_ring, ha->response_dma); + error_free_request_ring: + dma_free_coherent(&ha->pdev->dev, + ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)), + ha->request_ring, ha->request_dma); + error_put_host: + scsi_host_put(host); + error_disable_device: + pci_disable_device(pdev); + error: + return error; +} + + +static void +qla1280_remove_one(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; + + scsi_remove_host(host); + + qla1280_disable_intrs(ha); + + free_irq(pdev->irq, ha); + +#if MEMORY_MAPPED_IO + iounmap(ha->mmpbase); +#else + release_region(host->io_port, 0xff); +#endif + + dma_free_coherent(&ha->pdev->dev, + ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))), + ha->request_ring, ha->request_dma); + dma_free_coherent(&ha->pdev->dev, + ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))), + ha->response_ring, ha->response_dma); + + pci_disable_device(pdev); + + scsi_host_put(host); +} + +static struct pci_driver qla1280_pci_driver = { + .name = "qla1280", + .id_table = qla1280_pci_tbl, + .probe = qla1280_probe_one, + .remove = qla1280_remove_one, +}; + +static int __init +qla1280_init(void) +{ +#ifdef MODULE + /* + * If we are called as a module, the qla1280 pointer may not be null + * and it would point to our bootup string, just like on the lilo + * command line. IF not NULL, then process this config string with + * qla1280_setup + * + * Boot time Options + * To add options at boot time add a line to your lilo.conf file like: + * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}" + * which will result in the first four devices on the first two + * controllers being set to a tagged queue depth of 32. + */ + if (qla1280) + qla1280_setup(qla1280); +#endif + + return pci_register_driver(&qla1280_pci_driver); +} + +static void __exit +qla1280_exit(void) +{ + int i; + + pci_unregister_driver(&qla1280_pci_driver); + /* release any allocated firmware images */ + for (i = 0; i < QL_NUM_FW_IMAGES; i++) { + release_firmware(qla1280_fw_tbl[i].fw); + qla1280_fw_tbl[i].fw = NULL; + } +} + +module_init(qla1280_init); +module_exit(qla1280_exit); + +MODULE_AUTHOR("Qlogic & Jes Sorensen"); +MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("qlogic/1040.bin"); +MODULE_FIRMWARE("qlogic/1280.bin"); +MODULE_FIRMWARE("qlogic/12160.bin"); +MODULE_VERSION(QLA1280_VERSION); |