Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1265 insertions, 0 deletions

diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
new file mode 100644
index 000000000..301bc09c8
--- /dev/null
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -0,0 +1,1265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c)  2003-2013 QLogic Corporation
+ */
+
+#include <scsi/iscsi_if.h>
+#include "ql4_def.h"
+#include "ql4_glbl.h"
+#include "ql4_dbg.h"
+#include "ql4_inline.h"
+
+static void ql4xxx_set_mac_number(struct scsi_qla_host *ha)
+{
+	uint32_t value;
+	unsigned long flags;
+
+	/* Get the function number */
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	value = readw(&ha->reg->ctrl_status);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	switch (value & ISP_CONTROL_FN_MASK) {
+	case ISP_CONTROL_FN0_SCSI:
+		ha->mac_index = 1;
+		break;
+	case ISP_CONTROL_FN1_SCSI:
+		ha->mac_index = 3;
+		break;
+	default:
+		DEBUG2(printk("scsi%ld: %s: Invalid function number, "
+			      "ispControlStatus = 0x%x\n", ha->host_no,
+			      __func__, value));
+		break;
+	}
+	DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__,
+		      ha->mac_index));
+}
+
+/**
+ * qla4xxx_free_ddb - deallocate ddb
+ * @ha: pointer to host adapter structure.
+ * @ddb_entry: pointer to device database entry
+ *
+ * This routine marks a DDB entry INVALID
+ **/
+void qla4xxx_free_ddb(struct scsi_qla_host *ha,
+    struct ddb_entry *ddb_entry)
+{
+	/* Remove device pointer from index mapping arrays */
+	ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] =
+		(struct ddb_entry *) INVALID_ENTRY;
+	ha->tot_ddbs--;
+}
+
+/**
+ * qla4xxx_init_response_q_entries() - Initializes response queue entries.
+ * @ha: HA context
+ *
+ * Beginning of request ring has initialization control block already built
+ * by nvram config routine.
+ **/
+static void qla4xxx_init_response_q_entries(struct scsi_qla_host *ha)
+{
+	uint16_t cnt;
+	struct response *pkt;
+
+	pkt = (struct response *)ha->response_ptr;
+	for (cnt = 0; cnt < RESPONSE_QUEUE_DEPTH; cnt++) {
+		pkt->signature = RESPONSE_PROCESSED;
+		pkt++;
+	}
+}
+
+/**
+ * qla4xxx_init_rings - initialize hw queues
+ * @ha: pointer to host adapter structure.
+ *
+ * This routine initializes the internal queues for the specified adapter.
+ * The QLA4010 requires us to restart the queues at index 0.
+ * The QLA4000 doesn't care, so just default to QLA4010's requirement.
+ **/
+int qla4xxx_init_rings(struct scsi_qla_host *ha)
+{
+	unsigned long flags = 0;
+	int i;
+
+	/* Initialize request queue. */
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	ha->request_out = 0;
+	ha->request_in = 0;
+	ha->request_ptr = &ha->request_ring[ha->request_in];
+	ha->req_q_count = REQUEST_QUEUE_DEPTH;
+
+	/* Initialize response queue. */
+	ha->response_in = 0;
+	ha->response_out = 0;
+	ha->response_ptr = &ha->response_ring[ha->response_out];
+
+	if (is_qla8022(ha)) {
+		writel(0,
+		    (unsigned long  __iomem *)&ha->qla4_82xx_reg->req_q_out);
+		writel(0,
+		    (unsigned long  __iomem *)&ha->qla4_82xx_reg->rsp_q_in);
+		writel(0,
+		    (unsigned long  __iomem *)&ha->qla4_82xx_reg->rsp_q_out);
+	} else if (is_qla8032(ha) || is_qla8042(ha)) {
+		writel(0,
+		       (unsigned long __iomem *)&ha->qla4_83xx_reg->req_q_in);
+		writel(0,
+		       (unsigned long __iomem *)&ha->qla4_83xx_reg->rsp_q_in);
+		writel(0,
+		       (unsigned long __iomem *)&ha->qla4_83xx_reg->rsp_q_out);
+	} else {
+		/*
+		 * Initialize DMA Shadow registers.  The firmware is really
+		 * supposed to take care of this, but on some uniprocessor
+		 * systems, the shadow registers aren't cleared-- causing
+		 * the interrupt_handler to think there are responses to be
+		 * processed when there aren't.
+		 */
+		ha->shadow_regs->req_q_out = cpu_to_le32(0);
+		ha->shadow_regs->rsp_q_in = cpu_to_le32(0);
+		wmb();
+
+		writel(0, &ha->reg->req_q_in);
+		writel(0, &ha->reg->rsp_q_out);
+		readl(&ha->reg->rsp_q_out);
+	}
+
+	qla4xxx_init_response_q_entries(ha);
+
+	/* Initialize mailbox active array */
+	for (i = 0; i < MAX_MRB; i++)
+		ha->active_mrb_array[i] = NULL;
+
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	return QLA_SUCCESS;
+}
+
+/**
+ * qla4xxx_get_sys_info - validate adapter MAC address(es)
+ * @ha: pointer to host adapter structure.
+ *
+ **/
+int qla4xxx_get_sys_info(struct scsi_qla_host *ha)
+{
+	struct flash_sys_info *sys_info;
+	dma_addr_t sys_info_dma;
+	int status = QLA_ERROR;
+
+	sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
+				      &sys_info_dma, GFP_KERNEL);
+	if (sys_info == NULL) {
+		DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
+			      ha->host_no, __func__));
+
+		goto exit_get_sys_info_no_free;
+	}
+
+	/* Get flash sys info */
+	if (qla4xxx_get_flash(ha, sys_info_dma, FLASH_OFFSET_SYS_INFO,
+			      sizeof(*sys_info)) != QLA_SUCCESS) {
+		DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO "
+			      "failed\n", ha->host_no, __func__));
+
+		goto exit_get_sys_info;
+	}
+
+	/* Save M.A.C. address & serial_number */
+	memcpy(ha->my_mac, &sys_info->physAddr[0].address[0],
+	       min(sizeof(ha->my_mac),
+		   sizeof(sys_info->physAddr[0].address)));
+	memcpy(ha->serial_number, &sys_info->acSerialNumber,
+	       min(sizeof(ha->serial_number),
+		   sizeof(sys_info->acSerialNumber)));
+
+	status = QLA_SUCCESS;
+
+exit_get_sys_info:
+	dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info,
+			  sys_info_dma);
+
+exit_get_sys_info_no_free:
+	return status;
+}
+
+/**
+ * qla4xxx_init_local_data - initialize adapter specific local data
+ * @ha: pointer to host adapter structure.
+ *
+ **/
+static void qla4xxx_init_local_data(struct scsi_qla_host *ha)
+{
+	/* Initialize aen queue */
+	ha->aen_q_count = MAX_AEN_ENTRIES;
+}
+
+static uint8_t
+qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha)
+{
+	uint8_t ipv4_wait = 0;
+	uint8_t ipv6_wait = 0;
+	int8_t ip_address[IPv6_ADDR_LEN] = {0} ;
+
+	/* If both IPv4 & IPv6 are enabled, possibly only one
+	 * IP address may be acquired, so check to see if we
+	 * need to wait for another */
+	if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) {
+		if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) &&
+		    ((ha->addl_fw_state &
+				    FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) {
+			ipv4_wait = 1;
+		}
+		if (((ha->ip_config.ipv6_addl_options &
+		      IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) &&
+		    ((ha->ip_config.ipv6_link_local_state ==
+		      IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ip_config.ipv6_addr0_state ==
+		      IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ip_config.ipv6_addr1_state ==
+		      IP_ADDRSTATE_ACQUIRING))) {
+
+			ipv6_wait = 1;
+
+			if ((ha->ip_config.ipv6_link_local_state ==
+			     IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ip_config.ipv6_addr0_state ==
+			     IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ip_config.ipv6_addr1_state ==
+			     IP_ADDRSTATE_PREFERRED)) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "Preferred IP configured."
+					      " Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if (memcmp(&ha->ip_config.ipv6_default_router_addr,
+				   ip_address, IPv6_ADDR_LEN) == 0) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "No Router configured. "
+					      "Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if ((ha->ip_config.ipv6_default_router_state ==
+			     IPV6_RTRSTATE_MANUAL) &&
+			    (ha->ip_config.ipv6_link_local_state ==
+			     IP_ADDRSTATE_TENTATIVE) &&
+			    (memcmp(&ha->ip_config.ipv6_link_local_addr,
+			     &ha->ip_config.ipv6_default_router_addr, 4) ==
+			     0)) {
+				DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
+					"IP configured. Don't wait!\n",
+					ha->host_no, __func__));
+				ipv6_wait = 0;
+			}
+		}
+		if (ipv4_wait || ipv6_wait) {
+			DEBUG2(printk("scsi%ld: %s: Wait for additional "
+				      "IP(s) \"", ha->host_no, __func__));
+			if (ipv4_wait)
+				DEBUG2(printk("IPv4 "));
+			if (ha->ip_config.ipv6_link_local_state ==
+			    IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6LinkLocal "));
+			if (ha->ip_config.ipv6_addr0_state ==
+			    IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr0 "));
+			if (ha->ip_config.ipv6_addr1_state ==
+			    IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr1 "));
+			DEBUG2(printk("\"\n"));
+		}
+	}
+
+	return ipv4_wait|ipv6_wait;
+}
+
+static int qla4_80xx_is_minidump_dma_capable(struct scsi_qla_host *ha,
+		struct qla4_8xxx_minidump_template_hdr *md_hdr)
+{
+	int offset = (is_qla8022(ha)) ? QLA8022_TEMPLATE_CAP_OFFSET :
+					QLA83XX_TEMPLATE_CAP_OFFSET;
+	int rval = 1;
+	uint32_t *cap_offset;
+
+	cap_offset = (uint32_t *)((char *)md_hdr + offset);
+
+	if (!(le32_to_cpu(*cap_offset) & BIT_0)) {
+		ql4_printk(KERN_INFO, ha, "PEX DMA Not supported %d\n",
+			   *cap_offset);
+		rval = 0;
+	}
+
+	return rval;
+}
+
+/**
+ * qla4xxx_alloc_fw_dump - Allocate memory for minidump data.
+ * @ha: pointer to host adapter structure.
+ **/
+void qla4xxx_alloc_fw_dump(struct scsi_qla_host *ha)
+{
+	int status;
+	uint32_t capture_debug_level;
+	int hdr_entry_bit, k;
+	void *md_tmp;
+	dma_addr_t md_tmp_dma;
+	struct qla4_8xxx_minidump_template_hdr *md_hdr;
+	int dma_capable;
+
+	if (ha->fw_dump) {
+		ql4_printk(KERN_WARNING, ha,
+			   "Firmware dump previously allocated.\n");
+		return;
+	}
+
+	status = qla4xxx_req_template_size(ha);
+	if (status != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi%ld: Failed to get template size\n",
+			   ha->host_no);
+		return;
+	}
+
+	clear_bit(AF_82XX_FW_DUMPED, &ha->flags);
+
+	/* Allocate memory for saving the template */
+	md_tmp = dma_alloc_coherent(&ha->pdev->dev, ha->fw_dump_tmplt_size,
+				    &md_tmp_dma, GFP_KERNEL);
+	if (!md_tmp) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi%ld: Failed to allocate DMA memory\n",
+			   ha->host_no);
+		return;
+	}
+
+	/* Request template */
+	status =  qla4xxx_get_minidump_template(ha, md_tmp_dma);
+	if (status != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi%ld: Failed to get minidump template\n",
+			   ha->host_no);
+		goto alloc_cleanup;
+	}
+
+	md_hdr = (struct qla4_8xxx_minidump_template_hdr *)md_tmp;
+
+	dma_capable = qla4_80xx_is_minidump_dma_capable(ha, md_hdr);
+
+	capture_debug_level = md_hdr->capture_debug_level;
+
+	/* Get capture mask based on module loadtime setting. */
+	if ((ql4xmdcapmask >= 0x3 && ql4xmdcapmask <= 0x7F) ||
+	    (ql4xmdcapmask == 0xFF && dma_capable))  {
+		ha->fw_dump_capture_mask = ql4xmdcapmask;
+	} else {
+		if (ql4xmdcapmask == 0xFF)
+			ql4_printk(KERN_INFO, ha, "Falling back to default capture mask, as PEX DMA is not supported\n");
+		ha->fw_dump_capture_mask = capture_debug_level;
+	}
+
+	md_hdr->driver_capture_mask = ha->fw_dump_capture_mask;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Minimum num of entries = %d\n",
+			  md_hdr->num_of_entries));
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Dump template size  = %d\n",
+			  ha->fw_dump_tmplt_size));
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Selected Capture mask =0x%x\n",
+			  ha->fw_dump_capture_mask));
+
+	/* Calculate fw_dump_size */
+	for (hdr_entry_bit = 0x2, k = 1; (hdr_entry_bit & 0xFF);
+	     hdr_entry_bit <<= 1, k++) {
+		if (hdr_entry_bit & ha->fw_dump_capture_mask)
+			ha->fw_dump_size += md_hdr->capture_size_array[k];
+	}
+
+	/* Total firmware dump size including command header */
+	ha->fw_dump_size += ha->fw_dump_tmplt_size;
+	ha->fw_dump = vmalloc(ha->fw_dump_size);
+	if (!ha->fw_dump)
+		goto alloc_cleanup;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "Minidump Template Size = 0x%x KB\n",
+			  ha->fw_dump_tmplt_size));
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "Total Minidump size = 0x%x KB\n", ha->fw_dump_size));
+
+	memcpy(ha->fw_dump, md_tmp, ha->fw_dump_tmplt_size);
+	ha->fw_dump_tmplt_hdr = ha->fw_dump;
+
+alloc_cleanup:
+	dma_free_coherent(&ha->pdev->dev, ha->fw_dump_tmplt_size,
+			  md_tmp, md_tmp_dma);
+}
+
+static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
+{
+	uint32_t timeout_count;
+	int ready = 0;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Waiting for Firmware Ready..\n"));
+	for (timeout_count = ADAPTER_INIT_TOV; timeout_count > 0;
+	     timeout_count--) {
+		if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
+			qla4xxx_get_dhcp_ip_address(ha);
+
+		/* Get firmware state. */
+		if (qla4xxx_get_firmware_state(ha) != QLA_SUCCESS) {
+			DEBUG2(printk("scsi%ld: %s: unable to get firmware "
+				      "state\n", ha->host_no, __func__));
+			break;
+		}
+
+		if (ha->firmware_state & FW_STATE_ERROR) {
+			DEBUG2(printk("scsi%ld: %s: an unrecoverable error has"
+				      " occurred\n", ha->host_no, __func__));
+			break;
+
+		}
+		if (ha->firmware_state & FW_STATE_CONFIG_WAIT) {
+			/*
+			 * The firmware has not yet been issued an Initialize
+			 * Firmware command, so issue it now.
+			 */
+			if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR)
+				break;
+
+			/* Go back and test for ready state - no wait. */
+			continue;
+		}
+
+		if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      "AUTOCONNECT in progress\n",
+				      ha->host_no, __func__));
+		}
+
+		if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      " CONFIGURING IP\n",
+				      ha->host_no, __func__));
+			/*
+			 * Check for link state after 15 secs and if link is
+			 * still DOWN then, cable is unplugged. Ignore "DHCP
+			 * in Progress/CONFIGURING IP" bit to check if firmware
+			 * is in ready state or not after 15 secs.
+			 * This is applicable for both 2.x & 3.x firmware
+			 */
+			if (timeout_count <= (ADAPTER_INIT_TOV - 15)) {
+				if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s:"
+						  " LINK UP (Cable plugged)\n",
+						  ha->host_no, __func__));
+				} else if (ha->firmware_state &
+					  (FW_STATE_CONFIGURING_IP |
+							     FW_STATE_READY)) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+						"LINK DOWN (Cable unplugged)\n",
+						ha->host_no, __func__));
+					ha->firmware_state = FW_STATE_READY;
+				}
+			}
+		}
+
+		if (ha->firmware_state == FW_STATE_READY) {
+			/* If DHCP IP Addr is available, retrieve it now. */
+			if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR,
+								&ha->dpc_flags))
+				qla4xxx_get_dhcp_ip_address(ha);
+
+			if (!qla4xxx_wait_for_ip_config(ha) ||
+							timeout_count == 1) {
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+				    "Firmware Ready..\n"));
+				/* The firmware is ready to process SCSI
+				   commands. */
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+					"scsi%ld: %s: MEDIA TYPE"
+					" - %s\n", ha->host_no,
+					__func__, (ha->addl_fw_state &
+					FW_ADDSTATE_OPTICAL_MEDIA)
+					!= 0 ? "OPTICAL" : "COPPER"));
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+					"scsi%ld: %s: DHCPv4 STATE"
+					" Enabled %s\n", ha->host_no,
+					 __func__, (ha->addl_fw_state &
+					 FW_ADDSTATE_DHCPv4_ENABLED) != 0 ?
+					"YES" : "NO"));
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+					"scsi%ld: %s: LINK %s\n",
+					ha->host_no, __func__,
+					(ha->addl_fw_state &
+					 FW_ADDSTATE_LINK_UP) != 0 ?
+					"UP" : "DOWN"));
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+					"scsi%ld: %s: iSNS Service "
+					"Started %s\n",
+					ha->host_no, __func__,
+					(ha->addl_fw_state &
+					 FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ?
+					"YES" : "NO"));
+
+				ready = 1;
+				break;
+			}
+		}
+		DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
+			      "seconds expired= %d\n", ha->host_no, __func__,
+			      ha->firmware_state, ha->addl_fw_state,
+			      timeout_count));
+		if (is_qla4032(ha) &&
+			!(ha->addl_fw_state & FW_ADDSTATE_LINK_UP) &&
+			(timeout_count < ADAPTER_INIT_TOV - 5)) {
+			break;
+		}
+
+		msleep(1000);
+	}			/* end of for */
+
+	if (timeout_count <= 0)
+		DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
+			      ha->host_no, __func__));
+
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "
+			      "it's waiting to configure an IP address\n",
+			       ha->host_no, __func__));
+		ready = 1;
+	} else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but "
+			      "auto-discovery still in process\n",
+			       ha->host_no, __func__));
+		ready = 1;
+	}
+
+	return ready;
+}
+
+/**
+ * qla4xxx_init_firmware - initializes the firmware.
+ * @ha: pointer to host adapter structure.
+ *
+ **/
+static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
+{
+	int status = QLA_ERROR;
+
+	if (is_aer_supported(ha) &&
+	    test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
+		return status;
+
+	/* For 82xx, stop firmware before initializing because if BIOS
+	 * has previously initialized firmware, then driver's initialize
+	 * firmware will fail. */
+	if (is_qla80XX(ha))
+		qla4_8xxx_stop_firmware(ha);
+
+	ql4_printk(KERN_INFO, ha, "Initializing firmware..\n");
+	if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) {
+		DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
+			      "control block\n", ha->host_no, __func__));
+		return status;
+	}
+
+	if (!qla4xxx_fw_ready(ha))
+		return status;
+
+	if (is_qla80XX(ha) && !test_bit(AF_INIT_DONE, &ha->flags))
+		qla4xxx_alloc_fw_dump(ha);
+
+	return qla4xxx_get_firmware_status(ha);
+}
+
+static void qla4xxx_set_model_info(struct scsi_qla_host *ha)
+{
+	uint16_t board_id_string[8];
+	int i;
+	int size = sizeof(ha->nvram->isp4022.boardIdStr);
+	int offset = offsetof(struct eeprom_data, isp4022.boardIdStr) / 2;
+
+	for (i = 0; i < (size / 2) ; i++) {
+		board_id_string[i] = rd_nvram_word(ha, offset);
+		offset += 1;
+	}
+
+	memcpy(ha->model_name, board_id_string, size);
+}
+
+static int qla4xxx_config_nvram(struct scsi_qla_host *ha)
+{
+	unsigned long flags;
+	union external_hw_config_reg extHwConfig;
+
+	DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no,
+		      __func__));
+	if (ql4xxx_lock_flash(ha) != QLA_SUCCESS)
+		return QLA_ERROR;
+	if (ql4xxx_lock_nvram(ha) != QLA_SUCCESS) {
+		ql4xxx_unlock_flash(ha);
+		return QLA_ERROR;
+	}
+
+	/* Get EEPRom Parameters from NVRAM and validate */
+	ql4_printk(KERN_INFO, ha, "Configuring NVRAM ...\n");
+	if (qla4xxx_is_nvram_configuration_valid(ha) == QLA_SUCCESS) {
+		spin_lock_irqsave(&ha->hardware_lock, flags);
+		extHwConfig.Asuint32_t =
+			rd_nvram_word(ha, eeprom_ext_hw_conf_offset(ha));
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	} else {
+		ql4_printk(KERN_WARNING, ha,
+		    "scsi%ld: %s: EEProm checksum invalid.  "
+		    "Please update your EEPROM\n", ha->host_no,
+		    __func__);
+
+		/* Attempt to set defaults */
+		if (is_qla4010(ha))
+			extHwConfig.Asuint32_t = 0x1912;
+		else if (is_qla4022(ha) | is_qla4032(ha))
+			extHwConfig.Asuint32_t = 0x0023;
+		else
+			return QLA_ERROR;
+	}
+
+	if (is_qla4022(ha) || is_qla4032(ha))
+		qla4xxx_set_model_info(ha);
+	else
+		strcpy(ha->model_name, "QLA4010");
+
+	DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",
+		     ha->host_no, __func__, extHwConfig.Asuint32_t));
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	writel((0xFFFF << 16) | extHwConfig.Asuint32_t, isp_ext_hw_conf(ha));
+	readl(isp_ext_hw_conf(ha));
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	ql4xxx_unlock_nvram(ha);
+	ql4xxx_unlock_flash(ha);
+
+	return QLA_SUCCESS;
+}
+
+/**
+ * qla4_8xxx_pci_config() - Setup ISP82xx PCI configuration registers.
+ * @ha: HA context
+ */
+void qla4_8xxx_pci_config(struct scsi_qla_host *ha)
+{
+	pci_set_master(ha->pdev);
+}
+
+void qla4xxx_pci_config(struct scsi_qla_host *ha)
+{
+	uint16_t w;
+	int status;
+
+	ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n");
+
+	pci_set_master(ha->pdev);
+	status = pci_set_mwi(ha->pdev);
+	if (status)
+		ql4_printk(KERN_WARNING, ha, "Failed to set MWI\n");
+
+	/*
+	 * We want to respect framework's setting of PCI configuration space
+	 * command register and also want to make sure that all bits of
+	 * interest to us are properly set in command register.
+	 */
+	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
+	w |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	w &= ~PCI_COMMAND_INTX_DISABLE;
+	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+}
+
+static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
+{
+	int status = QLA_ERROR;
+	unsigned long max_wait_time;
+	unsigned long flags;
+	uint32_t mbox_status;
+
+	ql4_printk(KERN_INFO, ha, "Starting firmware ...\n");
+
+	/*
+	 * Start firmware from flash ROM
+	 *
+	 * WORKAROUND: Stuff a non-constant value that the firmware can
+	 * use as a seed for a random number generator in MB7 prior to
+	 * setting BOOT_ENABLE.	 Fixes problem where the TCP
+	 * connections use the same TCP ports after each reboot,
+	 * causing some connections to not get re-established.
+	 */
+	DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n",
+		     ha->host_no, __func__));
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	writel(jiffies, &ha->reg->mailbox[7]);
+	if (is_qla4022(ha) | is_qla4032(ha))
+		writel(set_rmask(NVR_WRITE_ENABLE),
+		       &ha->reg->u1.isp4022.nvram);
+
+        writel(2, &ha->reg->mailbox[6]);
+        readl(&ha->reg->mailbox[6]);
+
+	writel(set_rmask(CSR_BOOT_ENABLE), &ha->reg->ctrl_status);
+	readl(&ha->reg->ctrl_status);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	/* Wait for firmware to come UP. */
+	DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for "
+		      "boot firmware to complete...\n",
+		      ha->host_no, __func__, FIRMWARE_UP_TOV));
+	max_wait_time = jiffies + (FIRMWARE_UP_TOV * HZ);
+	do {
+		uint32_t ctrl_status;
+
+		spin_lock_irqsave(&ha->hardware_lock, flags);
+		ctrl_status = readw(&ha->reg->ctrl_status);
+		mbox_status = readw(&ha->reg->mailbox[0]);
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+		if (ctrl_status & set_rmask(CSR_SCSI_PROCESSOR_INTR))
+			break;
+		if (mbox_status == MBOX_STS_COMMAND_COMPLETE)
+			break;
+
+		DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "
+		    "firmware to complete... ctrl_sts=0x%x, remaining=%ld\n",
+		    ha->host_no, __func__, ctrl_status, max_wait_time));
+
+		msleep_interruptible(250);
+	} while (!time_after_eq(jiffies, max_wait_time));
+
+	if (mbox_status == MBOX_STS_COMMAND_COMPLETE) {
+		DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n",
+			     ha->host_no, __func__));
+
+		spin_lock_irqsave(&ha->hardware_lock, flags);
+		writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
+		       &ha->reg->ctrl_status);
+		readl(&ha->reg->ctrl_status);
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+		status = QLA_SUCCESS;
+	} else {
+		printk(KERN_INFO "scsi%ld: %s: Boot firmware failed "
+		       "-  mbox status 0x%x\n", ha->host_no, __func__,
+		       mbox_status);
+		status = QLA_ERROR;
+	}
+	return status;
+}
+
+int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a)
+{
+#define QL4_LOCK_DRVR_WAIT	60
+#define QL4_LOCK_DRVR_SLEEP	1
+
+	int drvr_wait = QL4_LOCK_DRVR_WAIT;
+	while (drvr_wait) {
+		if (ql4xxx_lock_drvr(a) == 0) {
+			ssleep(QL4_LOCK_DRVR_SLEEP);
+			DEBUG2(printk("scsi%ld: %s: Waiting for "
+				      "Global Init Semaphore(%d)...\n",
+				      a->host_no,
+				      __func__, drvr_wait));
+			drvr_wait -= QL4_LOCK_DRVR_SLEEP;
+		} else {
+			DEBUG2(printk("scsi%ld: %s: Global Init Semaphore "
+				      "acquired\n", a->host_no, __func__));
+			return QLA_SUCCESS;
+		}
+	}
+	return QLA_ERROR;
+}
+
+/**
+ * qla4xxx_start_firmware - starts qla4xxx firmware
+ * @ha: Pointer to host adapter structure.
+ *
+ * This routine performs the necessary steps to start the firmware for
+ * the QLA4010 adapter.
+ **/
+int qla4xxx_start_firmware(struct scsi_qla_host *ha)
+{
+	unsigned long flags = 0;
+	uint32_t mbox_status;
+	int status = QLA_ERROR;
+	int soft_reset = 1;
+	int config_chip = 0;
+
+	if (is_qla4022(ha) | is_qla4032(ha))
+		ql4xxx_set_mac_number(ha);
+
+	if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
+		return QLA_ERROR;
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+
+	DEBUG2(printk("scsi%ld: %s: port_ctrl	= 0x%08X\n", ha->host_no,
+		      __func__, readw(isp_port_ctrl(ha))));
+	DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no,
+		     __func__, readw(isp_port_status(ha))));
+
+	/* Is Hardware already initialized? */
+	if ((readw(isp_port_ctrl(ha)) & 0x8000) != 0) {
+		DEBUG(printk("scsi%ld: %s: Hardware has already been "
+			     "initialized\n", ha->host_no, __func__));
+
+		/* Receive firmware boot acknowledgement */
+		mbox_status = readw(&ha->reg->mailbox[0]);
+
+		DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= "
+			      "0x%x\n", ha->host_no, __func__, mbox_status));
+
+		/* Is firmware already booted? */
+		if (mbox_status == 0) {
+			/* F/W not running, must be config by net driver */
+			config_chip = 1;
+			soft_reset = 0;
+		} else {
+			writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
+			       &ha->reg->ctrl_status);
+			readl(&ha->reg->ctrl_status);
+			writel(set_rmask(CSR_SCSI_COMPLETION_INTR),
+			       &ha->reg->ctrl_status);
+			readl(&ha->reg->ctrl_status);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
+			if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) {
+				DEBUG2(printk("scsi%ld: %s: Get firmware "
+					      "state -- state = 0x%x\n",
+					      ha->host_no,
+					      __func__, ha->firmware_state));
+				/* F/W is running */
+				if (ha->firmware_state &
+				    FW_STATE_CONFIG_WAIT) {
+					DEBUG2(printk("scsi%ld: %s: Firmware "
+						      "in known state -- "
+						      "config and "
+						      "boot, state = 0x%x\n",
+						      ha->host_no, __func__,
+						      ha->firmware_state));
+					config_chip = 1;
+					soft_reset = 0;
+				}
+			} else {
+				DEBUG2(printk("scsi%ld: %s: Firmware in "
+					      "unknown state -- resetting,"
+					      " state = "
+					      "0x%x\n", ha->host_no, __func__,
+					      ha->firmware_state));
+			}
+			spin_lock_irqsave(&ha->hardware_lock, flags);
+		}
+	} else {
+		DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been "
+			     "started - resetting\n", ha->host_no, __func__));
+	}
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ",
+		     ha->host_no, __func__, soft_reset, config_chip));
+	if (soft_reset) {
+		DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no,
+			     __func__));
+		status = qla4xxx_soft_reset(ha);	/* NOTE: acquires drvr
+							 * lock again, but ok */
+		if (status == QLA_ERROR) {
+			DEBUG(printk("scsi%d: %s: Soft Reset failed!\n",
+				     ha->host_no, __func__));
+			ql4xxx_unlock_drvr(ha);
+			return QLA_ERROR;
+		}
+		config_chip = 1;
+
+		/* Reset clears the semaphore, so acquire again */
+		if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
+			return QLA_ERROR;
+	}
+
+	if (config_chip) {
+		if ((status = qla4xxx_config_nvram(ha)) == QLA_SUCCESS)
+			status = qla4xxx_start_firmware_from_flash(ha);
+	}
+
+	ql4xxx_unlock_drvr(ha);
+	if (status == QLA_SUCCESS) {
+		if (test_and_clear_bit(AF_GET_CRASH_RECORD, &ha->flags))
+			qla4xxx_get_crash_record(ha);
+
+		qla4xxx_init_rings(ha);
+	} else {
+		DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n",
+			     ha->host_no, __func__));
+	}
+	return status;
+}
+/**
+ * qla4xxx_free_ddb_index - Free DDBs reserved by firmware
+ * @ha: pointer to adapter structure
+ *
+ * Since firmware is not running in autoconnect mode the DDB indices should
+ * be freed so that when login happens from user space there are free DDB
+ * indices available.
+ **/
+void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
+{
+	int max_ddbs;
+	int ret;
+	uint32_t idx = 0, next_idx = 0;
+	uint32_t state = 0, conn_err = 0;
+
+	max_ddbs =  is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
+				     MAX_DEV_DB_ENTRIES;
+
+	for (idx = 0; idx < max_ddbs; idx = next_idx) {
+		ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL,
+					      &next_idx, &state, &conn_err,
+						NULL, NULL);
+		if (ret == QLA_ERROR) {
+			next_idx++;
+			continue;
+		}
+		if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
+		    state == DDB_DS_SESSION_FAILED) {
+			DEBUG2(ql4_printk(KERN_INFO, ha,
+					  "Freeing DDB index = 0x%x\n", idx));
+			ret = qla4xxx_clear_ddb_entry(ha, idx);
+			if (ret == QLA_ERROR)
+				ql4_printk(KERN_ERR, ha,
+					   "Unable to clear DDB index = "
+					   "0x%x\n", idx);
+		}
+		if (next_idx == 0)
+			break;
+	}
+}
+
+/**
+ * qla4xxx_initialize_adapter - initiailizes hba
+ * @ha: Pointer to host adapter structure.
+ * @is_reset: Is this init path or reset path
+ *
+ * This routine parforms all of the steps necessary to initialize the adapter.
+ *
+ **/
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset)
+{
+	int status = QLA_ERROR;
+
+	ha->eeprom_cmd_data = 0;
+
+	ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n");
+	ha->isp_ops->pci_config(ha);
+
+	ha->isp_ops->disable_intrs(ha);
+
+	/* Initialize the Host adapter request/response queues and firmware */
+	if (ha->isp_ops->start_firmware(ha) == QLA_ERROR)
+		goto exit_init_hba;
+
+	/*
+	 * For ISP83XX, mailbox and IOCB interrupts are enabled separately.
+	 * Mailbox interrupts must be enabled prior to issuing any mailbox
+	 * command in order to prevent the possibility of losing interrupts
+	 * while switching from polling to interrupt mode. IOCB interrupts are
+	 * enabled via isp_ops->enable_intrs.
+	 */
+	if (is_qla8032(ha) || is_qla8042(ha))
+		qla4_83xx_enable_mbox_intrs(ha);
+
+	if (qla4xxx_about_firmware(ha) == QLA_ERROR)
+		goto exit_init_hba;
+
+	if (ha->isp_ops->get_sys_info(ha) == QLA_ERROR)
+		goto exit_init_hba;
+
+	qla4xxx_init_local_data(ha);
+
+	status = qla4xxx_init_firmware(ha);
+	if (status == QLA_ERROR)
+		goto exit_init_hba;
+
+	if (is_reset == RESET_ADAPTER)
+		qla4xxx_build_ddb_list(ha, is_reset);
+
+	set_bit(AF_ONLINE, &ha->flags);
+
+exit_init_hba:
+	DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
+	    status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
+	return status;
+}
+
+int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+		       struct ddb_entry *ddb_entry, uint32_t state)
+{
+	uint32_t old_fw_ddb_device_state;
+	int status = QLA_ERROR;
+
+	old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: DDB - old state = 0x%x, new state = 0x%x for "
+			  "index [%d]\n", __func__,
+			  ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+
+	ddb_entry->fw_ddb_device_state = state;
+
+	switch (old_fw_ddb_device_state) {
+	case DDB_DS_LOGIN_IN_PROCESS:
+		switch (state) {
+		case DDB_DS_SESSION_ACTIVE:
+		case DDB_DS_DISCOVERY:
+			qla4xxx_update_session_conn_param(ha, ddb_entry);
+			ddb_entry->unblock_sess(ddb_entry->sess);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_SESSION_FAILED:
+		case DDB_DS_NO_CONNECTION_ACTIVE:
+			iscsi_conn_login_event(ddb_entry->conn,
+					       ISCSI_CONN_STATE_FREE);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	case DDB_DS_SESSION_ACTIVE:
+	case DDB_DS_DISCOVERY:
+		switch (state) {
+		case DDB_DS_SESSION_FAILED:
+			/*
+			 * iscsi_session failure  will cause userspace to
+			 * stop the connection which in turn would block the
+			 * iscsi_session and start relogin
+			 */
+			iscsi_session_failure(ddb_entry->sess->dd_data,
+					      ISCSI_ERR_CONN_FAILED);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_NO_CONNECTION_ACTIVE:
+			clear_bit(fw_ddb_index, ha->ddb_idx_map);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	case DDB_DS_SESSION_FAILED:
+		switch (state) {
+		case DDB_DS_SESSION_ACTIVE:
+		case DDB_DS_DISCOVERY:
+			ddb_entry->unblock_sess(ddb_entry->sess);
+			qla4xxx_update_session_conn_param(ha, ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_SESSION_FAILED:
+			iscsi_session_failure(ddb_entry->sess->dd_data,
+					      ISCSI_ERR_CONN_FAILED);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	default:
+		DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+				__func__));
+		break;
+	}
+	return status;
+}
+
+void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry)
+{
+	/*
+	 * This triggers a relogin.  After the relogin_timer
+	 * expires, the relogin gets scheduled.  We must wait a
+	 * minimum amount of time since receiving an 0x8014 AEN
+	 * with failed device_state or a logout response before
+	 * we can issue another relogin.
+	 *
+	 * Firmware pads this timeout: (time2wait +1).
+	 * Driver retry to login should be longer than F/W.
+	 * Otherwise F/W will fail
+	 * set_ddb() mbx cmd with 0x4005 since it still
+	 * counting down its time2wait.
+	 */
+	atomic_set(&ddb_entry->relogin_timer, 0);
+	atomic_set(&ddb_entry->retry_relogin_timer,
+		   ddb_entry->default_time2wait + 4);
+
+}
+
+int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+			     struct ddb_entry *ddb_entry, uint32_t state)
+{
+	uint32_t old_fw_ddb_device_state;
+	int status = QLA_ERROR;
+
+	old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: DDB - old state = 0x%x, new state = 0x%x for "
+			  "index [%d]\n", __func__,
+			  ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+
+	ddb_entry->fw_ddb_device_state = state;
+
+	switch (old_fw_ddb_device_state) {
+	case DDB_DS_LOGIN_IN_PROCESS:
+	case DDB_DS_NO_CONNECTION_ACTIVE:
+		switch (state) {
+		case DDB_DS_SESSION_ACTIVE:
+			ddb_entry->unblock_sess(ddb_entry->sess);
+			qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_SESSION_FAILED:
+			iscsi_block_session(ddb_entry->sess);
+			if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+				qla4xxx_arm_relogin_timer(ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	case DDB_DS_SESSION_ACTIVE:
+		switch (state) {
+		case DDB_DS_SESSION_FAILED:
+			iscsi_block_session(ddb_entry->sess);
+			if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+				qla4xxx_arm_relogin_timer(ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	case DDB_DS_SESSION_FAILED:
+		switch (state) {
+		case DDB_DS_SESSION_ACTIVE:
+			ddb_entry->unblock_sess(ddb_entry->sess);
+			qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_SESSION_FAILED:
+			if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+				qla4xxx_arm_relogin_timer(ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	default:
+		DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+				  __func__));
+		break;
+	}
+	return status;
+}
+
+/**
+ * qla4xxx_process_ddb_changed - process ddb state change
+ * @ha: Pointer to host adapter structure.
+ * @fw_ddb_index: Firmware's device database index
+ * @state: Device state
+ * @conn_err: Unused
+ *
+ * This routine processes a Decive Database Changed AEN Event.
+ **/
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
+				uint32_t fw_ddb_index,
+				uint32_t state, uint32_t conn_err)
+{
+	struct ddb_entry *ddb_entry;
+
+	/* check for out of range index */
+	if (fw_ddb_index >= MAX_DDB_ENTRIES)
+		goto exit_ddb_event;
+
+	/* Get the corresponging ddb entry */
+	ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
+	/* Device does not currently exist in our database. */
+	if (ddb_entry == NULL) {
+		ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
+			   __func__, fw_ddb_index);
+
+		if (state == DDB_DS_NO_CONNECTION_ACTIVE)
+			clear_bit(fw_ddb_index, ha->ddb_idx_map);
+
+		goto exit_ddb_event;
+	}
+
+	ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state);
+
+exit_ddb_event:
+	return QLA_ERROR;
+}
+
+/**
+ * qla4xxx_login_flash_ddb - Login to target (DDB)
+ * @cls_session: Pointer to the session to login
+ *
+ * This routine logins to the target.
+ * Issues setddb and conn open mbx
+ **/
+void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *sess;
+	struct ddb_entry *ddb_entry;
+	struct scsi_qla_host *ha;
+	struct dev_db_entry *fw_ddb_entry = NULL;
+	dma_addr_t fw_ddb_dma;
+	uint32_t mbx_sts = 0;
+	int ret;
+
+	sess = cls_session->dd_data;
+	ddb_entry = sess->dd_data;
+	ha =  ddb_entry->ha;
+
+	if (!test_bit(AF_LINK_UP, &ha->flags))
+		return;
+
+	if (ddb_entry->ddb_type != FLASH_DDB) {
+		DEBUG2(ql4_printk(KERN_INFO, ha,
+				  "Skipping login to non FLASH DB"));
+		goto exit_login;
+	}
+
+	fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
+				      &fw_ddb_dma);
+	if (fw_ddb_entry == NULL) {
+		DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
+		goto exit_login;
+	}
+
+	if (ddb_entry->fw_ddb_index == INVALID_ENTRY) {
+		ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index);
+		if (ret == QLA_ERROR)
+			goto exit_login;
+
+		ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
+		ha->tot_ddbs++;
+	}
+
+	memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry,
+	       sizeof(struct dev_db_entry));
+	ddb_entry->sess->target_id = ddb_entry->fw_ddb_index;
+
+	ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
+				    fw_ddb_dma, &mbx_sts);
+	if (ret == QLA_ERROR) {
+		DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n"));
+		goto exit_login;
+	}
+
+	ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS;
+	ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index);
+	if (ret == QLA_ERROR) {
+		ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
+			   sess->targetname);
+		goto exit_login;
+	}
+
+exit_login:
+	if (fw_ddb_entry)
+		dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+}
+