Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 813 insertions, 0 deletions

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
new file mode 100644
index 000000000..7e05b48db
--- /dev/null
+++ b/drivers/spi/atmel-quadspi.c
@@ -0,0 +1,813 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Atmel QSPI Controller
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ * Copyright (C) 2018 Cryptera A/S
+ *
+ * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com>
+ * Author: Piotr Bugalski <bugalski.piotr@gmail.com>
+ *
+ * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi-mem.h>
+
+/* QSPI register offsets */
+#define QSPI_CR      0x0000  /* Control Register */
+#define QSPI_MR      0x0004  /* Mode Register */
+#define QSPI_RD      0x0008  /* Receive Data Register */
+#define QSPI_TD      0x000c  /* Transmit Data Register */
+#define QSPI_SR      0x0010  /* Status Register */
+#define QSPI_IER     0x0014  /* Interrupt Enable Register */
+#define QSPI_IDR     0x0018  /* Interrupt Disable Register */
+#define QSPI_IMR     0x001c  /* Interrupt Mask Register */
+#define QSPI_SCR     0x0020  /* Serial Clock Register */
+
+#define QSPI_IAR     0x0030  /* Instruction Address Register */
+#define QSPI_ICR     0x0034  /* Instruction Code Register */
+#define QSPI_WICR    0x0034  /* Write Instruction Code Register */
+#define QSPI_IFR     0x0038  /* Instruction Frame Register */
+#define QSPI_RICR    0x003C  /* Read Instruction Code Register */
+
+#define QSPI_SMR     0x0040  /* Scrambling Mode Register */
+#define QSPI_SKR     0x0044  /* Scrambling Key Register */
+
+#define QSPI_WPMR    0x00E4  /* Write Protection Mode Register */
+#define QSPI_WPSR    0x00E8  /* Write Protection Status Register */
+
+#define QSPI_VERSION 0x00FC  /* Version Register */
+
+
+/* Bitfields in QSPI_CR (Control Register) */
+#define QSPI_CR_QSPIEN                  BIT(0)
+#define QSPI_CR_QSPIDIS                 BIT(1)
+#define QSPI_CR_SWRST                   BIT(7)
+#define QSPI_CR_LASTXFER                BIT(24)
+
+/* Bitfields in QSPI_MR (Mode Register) */
+#define QSPI_MR_SMM                     BIT(0)
+#define QSPI_MR_LLB                     BIT(1)
+#define QSPI_MR_WDRBT                   BIT(2)
+#define QSPI_MR_SMRM                    BIT(3)
+#define QSPI_MR_CSMODE_MASK             GENMASK(5, 4)
+#define QSPI_MR_CSMODE_NOT_RELOADED     (0 << 4)
+#define QSPI_MR_CSMODE_LASTXFER         (1 << 4)
+#define QSPI_MR_CSMODE_SYSTEMATICALLY   (2 << 4)
+#define QSPI_MR_NBBITS_MASK             GENMASK(11, 8)
+#define QSPI_MR_NBBITS(n)               ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK)
+#define QSPI_MR_DLYBCT_MASK             GENMASK(23, 16)
+#define QSPI_MR_DLYBCT(n)               (((n) << 16) & QSPI_MR_DLYBCT_MASK)
+#define QSPI_MR_DLYCS_MASK              GENMASK(31, 24)
+#define QSPI_MR_DLYCS(n)                (((n) << 24) & QSPI_MR_DLYCS_MASK)
+
+/* Bitfields in QSPI_SR/QSPI_IER/QSPI_IDR/QSPI_IMR  */
+#define QSPI_SR_RDRF                    BIT(0)
+#define QSPI_SR_TDRE                    BIT(1)
+#define QSPI_SR_TXEMPTY                 BIT(2)
+#define QSPI_SR_OVRES                   BIT(3)
+#define QSPI_SR_CSR                     BIT(8)
+#define QSPI_SR_CSS                     BIT(9)
+#define QSPI_SR_INSTRE                  BIT(10)
+#define QSPI_SR_QSPIENS                 BIT(24)
+
+#define QSPI_SR_CMD_COMPLETED	(QSPI_SR_INSTRE | QSPI_SR_CSR)
+
+/* Bitfields in QSPI_SCR (Serial Clock Register) */
+#define QSPI_SCR_CPOL                   BIT(0)
+#define QSPI_SCR_CPHA                   BIT(1)
+#define QSPI_SCR_SCBR_MASK              GENMASK(15, 8)
+#define QSPI_SCR_SCBR(n)                (((n) << 8) & QSPI_SCR_SCBR_MASK)
+#define QSPI_SCR_DLYBS_MASK             GENMASK(23, 16)
+#define QSPI_SCR_DLYBS(n)               (((n) << 16) & QSPI_SCR_DLYBS_MASK)
+
+/* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */
+#define QSPI_ICR_INST_MASK              GENMASK(7, 0)
+#define QSPI_ICR_INST(inst)             (((inst) << 0) & QSPI_ICR_INST_MASK)
+#define QSPI_ICR_OPT_MASK               GENMASK(23, 16)
+#define QSPI_ICR_OPT(opt)               (((opt) << 16) & QSPI_ICR_OPT_MASK)
+
+/* Bitfields in QSPI_IFR (Instruction Frame Register) */
+#define QSPI_IFR_WIDTH_MASK             GENMASK(2, 0)
+#define QSPI_IFR_WIDTH_SINGLE_BIT_SPI   (0 << 0)
+#define QSPI_IFR_WIDTH_DUAL_OUTPUT      (1 << 0)
+#define QSPI_IFR_WIDTH_QUAD_OUTPUT      (2 << 0)
+#define QSPI_IFR_WIDTH_DUAL_IO          (3 << 0)
+#define QSPI_IFR_WIDTH_QUAD_IO          (4 << 0)
+#define QSPI_IFR_WIDTH_DUAL_CMD         (5 << 0)
+#define QSPI_IFR_WIDTH_QUAD_CMD         (6 << 0)
+#define QSPI_IFR_INSTEN                 BIT(4)
+#define QSPI_IFR_ADDREN                 BIT(5)
+#define QSPI_IFR_OPTEN                  BIT(6)
+#define QSPI_IFR_DATAEN                 BIT(7)
+#define QSPI_IFR_OPTL_MASK              GENMASK(9, 8)
+#define QSPI_IFR_OPTL_1BIT              (0 << 8)
+#define QSPI_IFR_OPTL_2BIT              (1 << 8)
+#define QSPI_IFR_OPTL_4BIT              (2 << 8)
+#define QSPI_IFR_OPTL_8BIT              (3 << 8)
+#define QSPI_IFR_ADDRL                  BIT(10)
+#define QSPI_IFR_TFRTYP_MEM		BIT(12)
+#define QSPI_IFR_SAMA5D2_WRITE_TRSFR	BIT(13)
+#define QSPI_IFR_CRM                    BIT(14)
+#define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
+#define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
+#define QSPI_IFR_APBTFRTYP_READ		BIT(24)	/* Defined in SAM9X60 */
+
+/* Bitfields in QSPI_SMR (Scrambling Mode Register) */
+#define QSPI_SMR_SCREN                  BIT(0)
+#define QSPI_SMR_RVDIS                  BIT(1)
+
+/* Bitfields in QSPI_WPMR (Write Protection Mode Register) */
+#define QSPI_WPMR_WPEN                  BIT(0)
+#define QSPI_WPMR_WPKEY_MASK            GENMASK(31, 8)
+#define QSPI_WPMR_WPKEY(wpkey)          (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK)
+
+/* Bitfields in QSPI_WPSR (Write Protection Status Register) */
+#define QSPI_WPSR_WPVS                  BIT(0)
+#define QSPI_WPSR_WPVSRC_MASK           GENMASK(15, 8)
+#define QSPI_WPSR_WPVSRC(src)           (((src) << 8) & QSPI_WPSR_WPVSRC)
+
+struct atmel_qspi_caps {
+	bool has_qspick;
+	bool has_ricr;
+};
+
+struct atmel_qspi {
+	void __iomem		*regs;
+	void __iomem		*mem;
+	struct clk		*pclk;
+	struct clk		*qspick;
+	struct platform_device	*pdev;
+	const struct atmel_qspi_caps *caps;
+	resource_size_t		mmap_size;
+	u32			pending;
+	u32			mr;
+	u32			scr;
+	struct completion	cmd_completion;
+};
+
+struct atmel_qspi_mode {
+	u8 cmd_buswidth;
+	u8 addr_buswidth;
+	u8 data_buswidth;
+	u32 config;
+};
+
+static const struct atmel_qspi_mode atmel_qspi_modes[] = {
+	{ 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
+	{ 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
+	{ 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
+	{ 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO },
+	{ 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO },
+	{ 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD },
+	{ 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD },
+};
+
+#ifdef VERBOSE_DEBUG
+static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz)
+{
+	switch (offset) {
+	case QSPI_CR:
+		return "CR";
+	case QSPI_MR:
+		return "MR";
+	case QSPI_RD:
+		return "MR";
+	case QSPI_TD:
+		return "TD";
+	case QSPI_SR:
+		return "SR";
+	case QSPI_IER:
+		return "IER";
+	case QSPI_IDR:
+		return "IDR";
+	case QSPI_IMR:
+		return "IMR";
+	case QSPI_SCR:
+		return "SCR";
+	case QSPI_IAR:
+		return "IAR";
+	case QSPI_ICR:
+		return "ICR/WICR";
+	case QSPI_IFR:
+		return "IFR";
+	case QSPI_RICR:
+		return "RICR";
+	case QSPI_SMR:
+		return "SMR";
+	case QSPI_SKR:
+		return "SKR";
+	case QSPI_WPMR:
+		return "WPMR";
+	case QSPI_WPSR:
+		return "WPSR";
+	case QSPI_VERSION:
+		return "VERSION";
+	default:
+		snprintf(tmp, sz, "0x%02x", offset);
+		break;
+	}
+
+	return tmp;
+}
+#endif /* VERBOSE_DEBUG */
+
+static u32 atmel_qspi_read(struct atmel_qspi *aq, u32 offset)
+{
+	u32 value = readl_relaxed(aq->regs + offset);
+
+#ifdef VERBOSE_DEBUG
+	char tmp[8];
+
+	dev_vdbg(&aq->pdev->dev, "read 0x%08x from %s\n", value,
+		 atmel_qspi_reg_name(offset, tmp, sizeof(tmp)));
+#endif /* VERBOSE_DEBUG */
+
+	return value;
+}
+
+static void atmel_qspi_write(u32 value, struct atmel_qspi *aq, u32 offset)
+{
+#ifdef VERBOSE_DEBUG
+	char tmp[8];
+
+	dev_vdbg(&aq->pdev->dev, "write 0x%08x into %s\n", value,
+		 atmel_qspi_reg_name(offset, tmp, sizeof(tmp)));
+#endif /* VERBOSE_DEBUG */
+
+	writel_relaxed(value, aq->regs + offset);
+}
+
+static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op,
+					    const struct atmel_qspi_mode *mode)
+{
+	if (op->cmd.buswidth != mode->cmd_buswidth)
+		return false;
+
+	if (op->addr.nbytes && op->addr.buswidth != mode->addr_buswidth)
+		return false;
+
+	if (op->data.nbytes && op->data.buswidth != mode->data_buswidth)
+		return false;
+
+	return true;
+}
+
+static int atmel_qspi_find_mode(const struct spi_mem_op *op)
+{
+	u32 i;
+
+	for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++)
+		if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i]))
+			return i;
+
+	return -ENOTSUPP;
+}
+
+static bool atmel_qspi_supports_op(struct spi_mem *mem,
+				   const struct spi_mem_op *op)
+{
+	if (!spi_mem_default_supports_op(mem, op))
+		return false;
+
+	if (atmel_qspi_find_mode(op) < 0)
+		return false;
+
+	/* special case not supported by hardware */
+	if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth &&
+	    op->dummy.nbytes == 0)
+		return false;
+
+	return true;
+}
+
+static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
+			      const struct spi_mem_op *op, u32 *offset)
+{
+	u32 iar, icr, ifr;
+	u32 dummy_cycles = 0;
+	int mode;
+
+	iar = 0;
+	icr = QSPI_ICR_INST(op->cmd.opcode);
+	ifr = QSPI_IFR_INSTEN;
+
+	mode = atmel_qspi_find_mode(op);
+	if (mode < 0)
+		return mode;
+	ifr |= atmel_qspi_modes[mode].config;
+
+	if (op->dummy.nbytes)
+		dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
+
+	/*
+	 * The controller allows 24 and 32-bit addressing while NAND-flash
+	 * requires 16-bit long. Handling 8-bit long addresses is done using
+	 * the option field. For the 16-bit addresses, the workaround depends
+	 * of the number of requested dummy bits. If there are 8 or more dummy
+	 * cycles, the address is shifted and sent with the first dummy byte.
+	 * Otherwise opcode is disabled and the first byte of the address
+	 * contains the command opcode (works only if the opcode and address
+	 * use the same buswidth). The limitation is when the 16-bit address is
+	 * used without enough dummy cycles and the opcode is using a different
+	 * buswidth than the address.
+	 */
+	if (op->addr.buswidth) {
+		switch (op->addr.nbytes) {
+		case 0:
+			break;
+		case 1:
+			ifr |= QSPI_IFR_OPTEN | QSPI_IFR_OPTL_8BIT;
+			icr |= QSPI_ICR_OPT(op->addr.val & 0xff);
+			break;
+		case 2:
+			if (dummy_cycles < 8 / op->addr.buswidth) {
+				ifr &= ~QSPI_IFR_INSTEN;
+				ifr |= QSPI_IFR_ADDREN;
+				iar = (op->cmd.opcode << 16) |
+					(op->addr.val & 0xffff);
+			} else {
+				ifr |= QSPI_IFR_ADDREN;
+				iar = (op->addr.val << 8) & 0xffffff;
+				dummy_cycles -= 8 / op->addr.buswidth;
+			}
+			break;
+		case 3:
+			ifr |= QSPI_IFR_ADDREN;
+			iar = op->addr.val & 0xffffff;
+			break;
+		case 4:
+			ifr |= QSPI_IFR_ADDREN | QSPI_IFR_ADDRL;
+			iar = op->addr.val & 0x7ffffff;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	}
+
+	/* offset of the data access in the QSPI memory space */
+	*offset = iar;
+
+	/* Set number of dummy cycles */
+	if (dummy_cycles)
+		ifr |= QSPI_IFR_NBDUM(dummy_cycles);
+
+	/* Set data enable and data transfer type. */
+	if (op->data.nbytes) {
+		ifr |= QSPI_IFR_DATAEN;
+
+		if (op->addr.nbytes)
+			ifr |= QSPI_IFR_TFRTYP_MEM;
+	}
+
+	/*
+	 * If the QSPI controller is set in regular SPI mode, set it in
+	 * Serial Memory Mode (SMM).
+	 */
+	if (aq->mr != QSPI_MR_SMM) {
+		atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR);
+		aq->mr = QSPI_MR_SMM;
+	}
+
+	/* Clear pending interrupts */
+	(void)atmel_qspi_read(aq, QSPI_SR);
+
+	/* Set QSPI Instruction Frame registers. */
+	if (op->addr.nbytes && !op->data.nbytes)
+		atmel_qspi_write(iar, aq, QSPI_IAR);
+
+	if (aq->caps->has_ricr) {
+		if (op->data.dir == SPI_MEM_DATA_IN)
+			atmel_qspi_write(icr, aq, QSPI_RICR);
+		else
+			atmel_qspi_write(icr, aq, QSPI_WICR);
+	} else {
+		if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT)
+			ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
+
+		atmel_qspi_write(icr, aq, QSPI_ICR);
+	}
+
+	atmel_qspi_write(ifr, aq, QSPI_IFR);
+
+	return 0;
+}
+
+static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
+	u32 sr, offset;
+	int err;
+
+	/*
+	 * Check if the address exceeds the MMIO window size. An improvement
+	 * would be to add support for regular SPI mode and fall back to it
+	 * when the flash memories overrun the controller's memory space.
+	 */
+	if (op->addr.val + op->data.nbytes > aq->mmap_size)
+		return -ENOTSUPP;
+
+	err = pm_runtime_resume_and_get(&aq->pdev->dev);
+	if (err < 0)
+		return err;
+
+	err = atmel_qspi_set_cfg(aq, op, &offset);
+	if (err)
+		goto pm_runtime_put;
+
+	/* Skip to the final steps if there is no data */
+	if (op->data.nbytes) {
+		/* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */
+		(void)atmel_qspi_read(aq, QSPI_IFR);
+
+		/* Send/Receive data */
+		if (op->data.dir == SPI_MEM_DATA_IN)
+			memcpy_fromio(op->data.buf.in, aq->mem + offset,
+				      op->data.nbytes);
+		else
+			memcpy_toio(aq->mem + offset, op->data.buf.out,
+				    op->data.nbytes);
+
+		/* Release the chip-select */
+		atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR);
+	}
+
+	/* Poll INSTRuction End status */
+	sr = atmel_qspi_read(aq, QSPI_SR);
+	if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
+		goto pm_runtime_put;
+
+	/* Wait for INSTRuction End interrupt */
+	reinit_completion(&aq->cmd_completion);
+	aq->pending = sr & QSPI_SR_CMD_COMPLETED;
+	atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IER);
+	if (!wait_for_completion_timeout(&aq->cmd_completion,
+					 msecs_to_jiffies(1000)))
+		err = -ETIMEDOUT;
+	atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IDR);
+
+pm_runtime_put:
+	pm_runtime_mark_last_busy(&aq->pdev->dev);
+	pm_runtime_put_autosuspend(&aq->pdev->dev);
+	return err;
+}
+
+static const char *atmel_qspi_get_name(struct spi_mem *spimem)
+{
+	return dev_name(spimem->spi->dev.parent);
+}
+
+static const struct spi_controller_mem_ops atmel_qspi_mem_ops = {
+	.supports_op = atmel_qspi_supports_op,
+	.exec_op = atmel_qspi_exec_op,
+	.get_name = atmel_qspi_get_name
+};
+
+static int atmel_qspi_setup(struct spi_device *spi)
+{
+	struct spi_controller *ctrl = spi->master;
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+	unsigned long src_rate;
+	u32 scbr;
+	int ret;
+
+	if (ctrl->busy)
+		return -EBUSY;
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	src_rate = clk_get_rate(aq->pclk);
+	if (!src_rate)
+		return -EINVAL;
+
+	/* Compute the QSPI baudrate */
+	scbr = DIV_ROUND_UP(src_rate, spi->max_speed_hz);
+	if (scbr > 0)
+		scbr--;
+
+	ret = pm_runtime_resume_and_get(ctrl->dev.parent);
+	if (ret < 0)
+		return ret;
+
+	aq->scr = QSPI_SCR_SCBR(scbr);
+	atmel_qspi_write(aq->scr, aq, QSPI_SCR);
+
+	pm_runtime_mark_last_busy(ctrl->dev.parent);
+	pm_runtime_put_autosuspend(ctrl->dev.parent);
+
+	return 0;
+}
+
+static void atmel_qspi_init(struct atmel_qspi *aq)
+{
+	/* Reset the QSPI controller */
+	atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR);
+
+	/* Set the QSPI controller by default in Serial Memory Mode */
+	atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR);
+	aq->mr = QSPI_MR_SMM;
+
+	/* Enable the QSPI controller */
+	atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR);
+}
+
+static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
+{
+	struct atmel_qspi *aq = dev_id;
+	u32 status, mask, pending;
+
+	status = atmel_qspi_read(aq, QSPI_SR);
+	mask = atmel_qspi_read(aq, QSPI_IMR);
+	pending = status & mask;
+
+	if (!pending)
+		return IRQ_NONE;
+
+	aq->pending |= pending;
+	if ((aq->pending & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
+		complete(&aq->cmd_completion);
+
+	return IRQ_HANDLED;
+}
+
+static int atmel_qspi_probe(struct platform_device *pdev)
+{
+	struct spi_controller *ctrl;
+	struct atmel_qspi *aq;
+	struct resource *res;
+	int irq, err = 0;
+
+	ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*aq));
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
+	ctrl->setup = atmel_qspi_setup;
+	ctrl->bus_num = -1;
+	ctrl->mem_ops = &atmel_qspi_mem_ops;
+	ctrl->num_chipselect = 1;
+	ctrl->dev.of_node = pdev->dev.of_node;
+	platform_set_drvdata(pdev, ctrl);
+
+	aq = spi_controller_get_devdata(ctrl);
+
+	init_completion(&aq->cmd_completion);
+	aq->pdev = pdev;
+
+	/* Map the registers */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base");
+	aq->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(aq->regs)) {
+		dev_err(&pdev->dev, "missing registers\n");
+		return PTR_ERR(aq->regs);
+	}
+
+	/* Map the AHB memory */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mmap");
+	aq->mem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(aq->mem)) {
+		dev_err(&pdev->dev, "missing AHB memory\n");
+		return PTR_ERR(aq->mem);
+	}
+
+	aq->mmap_size = resource_size(res);
+
+	/* Get the peripheral clock */
+	aq->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(aq->pclk))
+		aq->pclk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(aq->pclk)) {
+		dev_err(&pdev->dev, "missing peripheral clock\n");
+		return PTR_ERR(aq->pclk);
+	}
+
+	/* Enable the peripheral clock */
+	err = clk_prepare_enable(aq->pclk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
+		return err;
+	}
+
+	aq->caps = of_device_get_match_data(&pdev->dev);
+	if (!aq->caps) {
+		dev_err(&pdev->dev, "Could not retrieve QSPI caps\n");
+		err = -EINVAL;
+		goto disable_pclk;
+	}
+
+	if (aq->caps->has_qspick) {
+		/* Get the QSPI system clock */
+		aq->qspick = devm_clk_get(&pdev->dev, "qspick");
+		if (IS_ERR(aq->qspick)) {
+			dev_err(&pdev->dev, "missing system clock\n");
+			err = PTR_ERR(aq->qspick);
+			goto disable_pclk;
+		}
+
+		/* Enable the QSPI system clock */
+		err = clk_prepare_enable(aq->qspick);
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to enable the QSPI system clock\n");
+			goto disable_pclk;
+		}
+	}
+
+	/* Request the IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = irq;
+		goto disable_qspick;
+	}
+	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
+			       0, dev_name(&pdev->dev), aq);
+	if (err)
+		goto disable_qspick;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+
+	atmel_qspi_init(aq);
+
+	err = spi_register_controller(ctrl);
+	if (err) {
+		pm_runtime_put_noidle(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_set_suspended(&pdev->dev);
+		pm_runtime_dont_use_autosuspend(&pdev->dev);
+		goto disable_qspick;
+	}
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	return 0;
+
+disable_qspick:
+	clk_disable_unprepare(aq->qspick);
+disable_pclk:
+	clk_disable_unprepare(aq->pclk);
+
+	return err;
+}
+
+static int atmel_qspi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctrl = platform_get_drvdata(pdev);
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+	int ret;
+
+	spi_unregister_controller(ctrl);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret >= 0) {
+		atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+		clk_disable(aq->qspick);
+		clk_disable(aq->pclk);
+	} else {
+		/*
+		 * atmel_qspi_runtime_{suspend,resume} just disable and enable
+		 * the two clks respectively. So after resume failed these are
+		 * off, and we skip hardware access and disabling these clks again.
+		 */
+		dev_warn(&pdev->dev, "Failed to resume device on remove\n");
+	}
+
+	clk_unprepare(aq->qspick);
+	clk_unprepare(aq->pclk);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused atmel_qspi_suspend(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_force_suspend(dev);
+
+	clk_unprepare(aq->qspick);
+	clk_unprepare(aq->pclk);
+
+	return 0;
+}
+
+static int __maybe_unused atmel_qspi_resume(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+	int ret;
+
+	clk_prepare(aq->pclk);
+	clk_prepare(aq->qspick);
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret < 0)
+		return ret;
+
+	atmel_qspi_init(aq);
+
+	atmel_qspi_write(aq->scr, aq, QSPI_SCR);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static int __maybe_unused atmel_qspi_runtime_suspend(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+
+	clk_disable(aq->qspick);
+	clk_disable(aq->pclk);
+
+	return 0;
+}
+
+static int __maybe_unused atmel_qspi_runtime_resume(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
+	int ret;
+
+	ret = clk_enable(aq->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(aq->qspick);
+	if (ret)
+		clk_disable(aq->pclk);
+
+	return ret;
+}
+
+static const struct dev_pm_ops __maybe_unused atmel_qspi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(atmel_qspi_suspend, atmel_qspi_resume)
+	SET_RUNTIME_PM_OPS(atmel_qspi_runtime_suspend,
+			   atmel_qspi_runtime_resume, NULL)
+};
+
+static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {};
+
+static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = {
+	.has_qspick = true,
+	.has_ricr = true,
+};
+
+static const struct of_device_id atmel_qspi_dt_ids[] = {
+	{
+		.compatible = "atmel,sama5d2-qspi",
+		.data = &atmel_sama5d2_qspi_caps,
+	},
+	{
+		.compatible = "microchip,sam9x60-qspi",
+		.data = &atmel_sam9x60_qspi_caps,
+	},
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_qspi_dt_ids);
+
+static struct platform_driver atmel_qspi_driver = {
+	.driver = {
+		.name	= "atmel_qspi",
+		.of_match_table	= atmel_qspi_dt_ids,
+		.pm	= pm_ptr(&atmel_qspi_pm_ops),
+	},
+	.probe		= atmel_qspi_probe,
+	.remove		= atmel_qspi_remove,
+};
+module_platform_driver(atmel_qspi_driver);
+
+MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@atmel.com>");
+MODULE_AUTHOR("Piotr Bugalski <bugalski.piotr@gmail.com");
+MODULE_DESCRIPTION("Atmel QSPI Controller driver");
+MODULE_LICENSE("GPL v2");