diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/staging/media/omap4iss/iss_csiphy.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/staging/media/omap4iss/iss_csiphy.c')
-rw-r--r-- | drivers/staging/media/omap4iss/iss_csiphy.c | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/drivers/staging/media/omap4iss/iss_csiphy.c b/drivers/staging/media/omap4iss/iss_csiphy.c new file mode 100644 index 000000000..96f2ce045 --- /dev/null +++ b/drivers/staging/media/omap4iss/iss_csiphy.c @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * TI OMAP4 ISS V4L2 Driver - CSI PHY module + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Author: Sergio Aguirre <sergio.a.aguirre@gmail.com> + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/regmap.h> + +#include "../../../../arch/arm/mach-omap2/control.h" + +#include "iss.h" +#include "iss_regs.h" +#include "iss_csiphy.h" + +/* + * csiphy_lanes_config - Configuration of CSIPHY lanes. + * + * Updates HW configuration. + * Called with phy->mutex taken. + */ +static void csiphy_lanes_config(struct iss_csiphy *phy) +{ + unsigned int i; + u32 reg; + + reg = iss_reg_read(phy->iss, phy->cfg_regs, CSI2_COMPLEXIO_CFG); + + for (i = 0; i < phy->max_data_lanes; i++) { + reg &= ~(CSI2_COMPLEXIO_CFG_DATA_POL(i + 1) | + CSI2_COMPLEXIO_CFG_DATA_POSITION_MASK(i + 1)); + reg |= (phy->lanes.data[i].pol ? + CSI2_COMPLEXIO_CFG_DATA_POL(i + 1) : 0); + reg |= (phy->lanes.data[i].pos << + CSI2_COMPLEXIO_CFG_DATA_POSITION_SHIFT(i + 1)); + } + + reg &= ~(CSI2_COMPLEXIO_CFG_CLOCK_POL | + CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK); + reg |= phy->lanes.clk.pol ? CSI2_COMPLEXIO_CFG_CLOCK_POL : 0; + reg |= phy->lanes.clk.pos << CSI2_COMPLEXIO_CFG_CLOCK_POSITION_SHIFT; + + iss_reg_write(phy->iss, phy->cfg_regs, CSI2_COMPLEXIO_CFG, reg); +} + +/* + * csiphy_set_power + * @power: Power state to be set. + * + * Returns 0 if successful, or -EBUSY if the retry count is exceeded. + */ +static int csiphy_set_power(struct iss_csiphy *phy, u32 power) +{ + u32 reg; + u8 retry_count; + + iss_reg_update(phy->iss, phy->cfg_regs, CSI2_COMPLEXIO_CFG, + CSI2_COMPLEXIO_CFG_PWD_CMD_MASK, + power | CSI2_COMPLEXIO_CFG_PWR_AUTO); + + retry_count = 0; + do { + udelay(1); + reg = iss_reg_read(phy->iss, phy->cfg_regs, CSI2_COMPLEXIO_CFG) + & CSI2_COMPLEXIO_CFG_PWD_STATUS_MASK; + + if (reg != power >> 2) + retry_count++; + + } while ((reg != power >> 2) && (retry_count < 250)); + + if (retry_count == 250) { + dev_err(phy->iss->dev, "CSI2 CIO set power failed!\n"); + return -EBUSY; + } + + return 0; +} + +/* + * csiphy_dphy_config - Configure CSI2 D-PHY parameters. + * + * Called with phy->mutex taken. + */ +static void csiphy_dphy_config(struct iss_csiphy *phy) +{ + u32 reg; + + /* Set up REGISTER0 */ + reg = phy->dphy.ths_term << REGISTER0_THS_TERM_SHIFT; + reg |= phy->dphy.ths_settle << REGISTER0_THS_SETTLE_SHIFT; + + iss_reg_write(phy->iss, phy->phy_regs, REGISTER0, reg); + + /* Set up REGISTER1 */ + reg = phy->dphy.tclk_term << REGISTER1_TCLK_TERM_SHIFT; + reg |= phy->dphy.tclk_miss << REGISTER1_CTRLCLK_DIV_FACTOR_SHIFT; + reg |= phy->dphy.tclk_settle << REGISTER1_TCLK_SETTLE_SHIFT; + reg |= 0xb8 << REGISTER1_DPHY_HS_SYNC_PATTERN_SHIFT; + + iss_reg_write(phy->iss, phy->phy_regs, REGISTER1, reg); +} + +/* + * TCLK values are OK at their reset values + */ +#define TCLK_TERM 0 +#define TCLK_MISS 1 +#define TCLK_SETTLE 14 + +int omap4iss_csiphy_config(struct iss_device *iss, + struct v4l2_subdev *csi2_subdev) +{ + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(csi2_subdev); + struct iss_pipeline *pipe = to_iss_pipeline(&csi2_subdev->entity); + struct iss_v4l2_subdevs_group *subdevs = pipe->external->host_priv; + struct iss_csiphy_dphy_cfg csi2phy; + int csi2_ddrclk_khz; + struct iss_csiphy_lanes_cfg *lanes; + unsigned int used_lanes = 0; + u32 cam_rx_ctrl; + unsigned int i; + + lanes = &subdevs->bus.csi2.lanecfg; + + /* + * SCM.CONTROL_CAMERA_RX + * - bit [31] : CSIPHY2 lane 2 enable (4460+ only) + * - bit [30:29] : CSIPHY2 per-lane enable (1 to 0) + * - bit [28:24] : CSIPHY1 per-lane enable (4 to 0) + * - bit [21] : CSIPHY2 CTRLCLK enable + * - bit [20:19] : CSIPHY2 config: 00 d-phy, 01/10 ccp2 + * - bit [18] : CSIPHY1 CTRLCLK enable + * - bit [17:16] : CSIPHY1 config: 00 d-phy, 01/10 ccp2 + */ + /* + * TODO: When implementing DT support specify the CONTROL_CAMERA_RX + * register offset in the syscon property instead of hardcoding it. + */ + regmap_read(iss->syscon, 0x68, &cam_rx_ctrl); + + if (subdevs->interface == ISS_INTERFACE_CSI2A_PHY1) { + cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI21_LANEENABLE_MASK | + OMAP4_CAMERARX_CSI21_CAMMODE_MASK); + /* NOTE: Leave CSIPHY1 config to 0x0: D-PHY mode */ + /* Enable all lanes for now */ + cam_rx_ctrl |= + 0x1f << OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT; + /* Enable CTRLCLK */ + cam_rx_ctrl |= OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK; + } + + if (subdevs->interface == ISS_INTERFACE_CSI2B_PHY2) { + cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI22_LANEENABLE_MASK | + OMAP4_CAMERARX_CSI22_CAMMODE_MASK); + /* NOTE: Leave CSIPHY2 config to 0x0: D-PHY mode */ + /* Enable all lanes for now */ + cam_rx_ctrl |= + 0x3 << OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT; + /* Enable CTRLCLK */ + cam_rx_ctrl |= OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK; + } + + regmap_write(iss->syscon, 0x68, cam_rx_ctrl); + + /* Reset used lane count */ + csi2->phy->used_data_lanes = 0; + + /* Clock and data lanes verification */ + for (i = 0; i < csi2->phy->max_data_lanes; i++) { + if (lanes->data[i].pos == 0) + continue; + + if (lanes->data[i].pol > 1 || + lanes->data[i].pos > (csi2->phy->max_data_lanes + 1)) + return -EINVAL; + + if (used_lanes & (1 << lanes->data[i].pos)) + return -EINVAL; + + used_lanes |= 1 << lanes->data[i].pos; + csi2->phy->used_data_lanes++; + } + + if (lanes->clk.pol > 1 || + lanes->clk.pos > (csi2->phy->max_data_lanes + 1)) + return -EINVAL; + + if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos)) + return -EINVAL; + + csi2_ddrclk_khz = pipe->external_rate / 1000 + / (2 * csi2->phy->used_data_lanes) + * pipe->external_bpp; + + /* + * THS_TERM: Programmed value = ceil(12.5 ns/DDRClk period) - 1. + * THS_SETTLE: Programmed value = ceil(90 ns/DDRClk period) + 3. + */ + csi2phy.ths_term = DIV_ROUND_UP(25 * csi2_ddrclk_khz, 2000000) - 1; + csi2phy.ths_settle = DIV_ROUND_UP(90 * csi2_ddrclk_khz, 1000000) + 3; + csi2phy.tclk_term = TCLK_TERM; + csi2phy.tclk_miss = TCLK_MISS; + csi2phy.tclk_settle = TCLK_SETTLE; + + mutex_lock(&csi2->phy->mutex); + csi2->phy->dphy = csi2phy; + csi2->phy->lanes = *lanes; + mutex_unlock(&csi2->phy->mutex); + + return 0; +} + +int omap4iss_csiphy_acquire(struct iss_csiphy *phy) +{ + int rval; + + mutex_lock(&phy->mutex); + + rval = omap4iss_csi2_reset(phy->csi2); + if (rval) + goto done; + + csiphy_dphy_config(phy); + csiphy_lanes_config(phy); + + rval = csiphy_set_power(phy, CSI2_COMPLEXIO_CFG_PWD_CMD_ON); + if (rval) + goto done; + + phy->phy_in_use = 1; + +done: + mutex_unlock(&phy->mutex); + return rval; +} + +void omap4iss_csiphy_release(struct iss_csiphy *phy) +{ + mutex_lock(&phy->mutex); + if (phy->phy_in_use) { + csiphy_set_power(phy, CSI2_COMPLEXIO_CFG_PWD_CMD_OFF); + phy->phy_in_use = 0; + } + mutex_unlock(&phy->mutex); +} + +/* + * omap4iss_csiphy_init - Initialize the CSI PHY frontends + */ +int omap4iss_csiphy_init(struct iss_device *iss) +{ + struct iss_csiphy *phy1 = &iss->csiphy1; + struct iss_csiphy *phy2 = &iss->csiphy2; + + phy1->iss = iss; + phy1->csi2 = &iss->csi2a; + phy1->max_data_lanes = ISS_CSIPHY1_NUM_DATA_LANES; + phy1->used_data_lanes = 0; + phy1->cfg_regs = OMAP4_ISS_MEM_CSI2_A_REGS1; + phy1->phy_regs = OMAP4_ISS_MEM_CAMERARX_CORE1; + mutex_init(&phy1->mutex); + + phy2->iss = iss; + phy2->csi2 = &iss->csi2b; + phy2->max_data_lanes = ISS_CSIPHY2_NUM_DATA_LANES; + phy2->used_data_lanes = 0; + phy2->cfg_regs = OMAP4_ISS_MEM_CSI2_B_REGS1; + phy2->phy_regs = OMAP4_ISS_MEM_CAMERARX_CORE2; + mutex_init(&phy2->mutex); + + return 0; +} |