diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/thermal/qcom/qcom-spmi-adc-tm5.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/thermal/qcom/qcom-spmi-adc-tm5.c')
-rw-r--r-- | drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 1081 |
1 files changed, 1081 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c new file mode 100644 index 000000000..1b2c43eab --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c @@ -0,0 +1,1081 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Linaro Limited + * + * Based on original driver: + * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved. + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/iio/adc/qcom-vadc-common.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include <asm-generic/unaligned.h> + +#include "../thermal_hwmon.h" + +/* + * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each + * channel is programmed to use one of ADC channels for voltage comparison. + * Voltages are programmed using ADC codes, so we have to convert temp to + * voltage and then to ADC code value. + * + * Configuration of TM channels must match configuration of corresponding ADC + * channels. + */ + +#define ADC5_MAX_CHANNEL 0xc0 +#define ADC_TM5_NUM_CHANNELS 8 + +#define ADC_TM5_STATUS_LOW 0x0a + +#define ADC_TM5_STATUS_HIGH 0x0b + +#define ADC_TM5_NUM_BTM 0x0f + +#define ADC_TM5_ADC_DIG_PARAM 0x42 + +#define ADC_TM5_FAST_AVG_CTL (ADC_TM5_ADC_DIG_PARAM + 1) +#define ADC_TM5_FAST_AVG_EN BIT(7) + +#define ADC_TM5_MEAS_INTERVAL_CTL (ADC_TM5_ADC_DIG_PARAM + 2) +#define ADC_TM5_TIMER1 3 /* 3.9ms */ + +#define ADC_TM5_MEAS_INTERVAL_CTL2 (ADC_TM5_ADC_DIG_PARAM + 3) +#define ADC_TM5_MEAS_INTERVAL_CTL2_MASK 0xf0 +#define ADC_TM5_TIMER2 10 /* 1 second */ +#define ADC_TM5_MEAS_INTERVAL_CTL3_MASK 0xf +#define ADC_TM5_TIMER3 4 /* 4 second */ + +#define ADC_TM_EN_CTL1 0x46 +#define ADC_TM_EN BIT(7) +#define ADC_TM_CONV_REQ 0x47 +#define ADC_TM_CONV_REQ_EN BIT(7) + +#define ADC_TM5_M_CHAN_BASE 0x60 + +#define ADC_TM5_M_ADC_CH_SEL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 0) +#define ADC_TM5_M_LOW_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 1) +#define ADC_TM5_M_LOW_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 2) +#define ADC_TM5_M_HIGH_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 3) +#define ADC_TM5_M_HIGH_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 4) +#define ADC_TM5_M_MEAS_INTERVAL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 5) +#define ADC_TM5_M_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 6) +#define ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK 0xf +#define ADC_TM5_M_CTL_CAL_SEL_MASK 0x30 +#define ADC_TM5_M_CTL_CAL_VAL 0x40 +#define ADC_TM5_M_EN(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 7) +#define ADC_TM5_M_MEAS_EN BIT(7) +#define ADC_TM5_M_HIGH_THR_INT_EN BIT(1) +#define ADC_TM5_M_LOW_THR_INT_EN BIT(0) + +#define ADC_TM_GEN2_STATUS1 0x08 +#define ADC_TM_GEN2_STATUS_LOW_SET 0x09 +#define ADC_TM_GEN2_STATUS_LOW_CLR 0x0a +#define ADC_TM_GEN2_STATUS_HIGH_SET 0x0b +#define ADC_TM_GEN2_STATUS_HIGH_CLR 0x0c + +#define ADC_TM_GEN2_CFG_HS_SET 0x0d +#define ADC_TM_GEN2_CFG_HS_FLAG BIT(0) +#define ADC_TM_GEN2_CFG_HS_CLR 0x0e + +#define ADC_TM_GEN2_SID 0x40 + +#define ADC_TM_GEN2_CH_CTL 0x41 +#define ADC_TM_GEN2_TM_CH_SEL GENMASK(7, 5) +#define ADC_TM_GEN2_MEAS_INT_SEL GENMASK(3, 2) + +#define ADC_TM_GEN2_ADC_DIG_PARAM 0x42 +#define ADC_TM_GEN2_CTL_CAL_SEL GENMASK(5, 4) +#define ADC_TM_GEN2_CTL_DEC_RATIO_MASK GENMASK(3, 2) + +#define ADC_TM_GEN2_FAST_AVG_CTL 0x43 +#define ADC_TM_GEN2_FAST_AVG_EN BIT(7) + +#define ADC_TM_GEN2_ADC_CH_SEL_CTL 0x44 + +#define ADC_TM_GEN2_DELAY_CTL 0x45 +#define ADC_TM_GEN2_HW_SETTLE_DELAY GENMASK(3, 0) + +#define ADC_TM_GEN2_EN_CTL1 0x46 +#define ADC_TM_GEN2_EN BIT(7) + +#define ADC_TM_GEN2_CONV_REQ 0x47 +#define ADC_TM_GEN2_CONV_REQ_EN BIT(7) + +#define ADC_TM_GEN2_LOW_THR0 0x49 +#define ADC_TM_GEN2_LOW_THR1 0x4a +#define ADC_TM_GEN2_HIGH_THR0 0x4b +#define ADC_TM_GEN2_HIGH_THR1 0x4c +#define ADC_TM_GEN2_LOWER_MASK(n) ((n) & GENMASK(7, 0)) +#define ADC_TM_GEN2_UPPER_MASK(n) (((n) & GENMASK(15, 8)) >> 8) + +#define ADC_TM_GEN2_MEAS_IRQ_EN 0x4d +#define ADC_TM_GEN2_MEAS_EN BIT(7) +#define ADC_TM5_GEN2_HIGH_THR_INT_EN BIT(1) +#define ADC_TM5_GEN2_LOW_THR_INT_EN BIT(0) + +#define ADC_TM_GEN2_MEAS_INT_LSB 0x50 +#define ADC_TM_GEN2_MEAS_INT_MSB 0x51 +#define ADC_TM_GEN2_MEAS_INT_MODE 0x52 + +#define ADC_TM_GEN2_Mn_DATA0(n) ((n * 2) + 0xa0) +#define ADC_TM_GEN2_Mn_DATA1(n) ((n * 2) + 0xa1) +#define ADC_TM_GEN2_DATA_SHIFT 8 + +enum adc5_timer_select { + ADC5_TIMER_SEL_1 = 0, + ADC5_TIMER_SEL_2, + ADC5_TIMER_SEL_3, + ADC5_TIMER_SEL_NONE, +}; + +enum adc5_gen { + ADC_TM5, + ADC_TM_HC, + ADC_TM5_GEN2, + ADC_TM5_MAX +}; + +enum adc_tm5_cal_method { + ADC_TM5_NO_CAL = 0, + ADC_TM5_RATIOMETRIC_CAL, + ADC_TM5_ABSOLUTE_CAL +}; + +enum adc_tm_gen2_time_select { + MEAS_INT_50MS = 0, + MEAS_INT_100MS, + MEAS_INT_1S, + MEAS_INT_SET, + MEAS_INT_NONE, +}; + +struct adc_tm5_chip; +struct adc_tm5_channel; + +struct adc_tm5_data { + const u32 full_scale_code_volt; + unsigned int *decimation; + unsigned int *hw_settle; + int (*disable_channel)(struct adc_tm5_channel *channel); + int (*configure)(struct adc_tm5_channel *channel, int low, int high); + irqreturn_t (*isr)(int irq, void *data); + int (*init)(struct adc_tm5_chip *chip); + char *irq_name; + int gen; +}; + +/** + * struct adc_tm5_channel - ADC Thermal Monitoring channel data. + * @channel: channel number. + * @adc_channel: corresponding ADC channel number. + * @cal_method: calibration method. + * @prescale: channel scaling performed on the input signal. + * @hw_settle_time: the time between AMUX being configured and the + * start of conversion. + * @decimation: sampling rate supported for the channel. + * @avg_samples: ability to provide single result from the ADC + * that is an average of multiple measurements. + * @high_thr_en: channel upper voltage threshold enable state. + * @low_thr_en: channel lower voltage threshold enable state. + * @meas_en: recurring measurement enable state + * @iio: IIO channel instance used by this channel. + * @chip: ADC TM chip instance. + * @tzd: thermal zone device used by this channel. + */ +struct adc_tm5_channel { + unsigned int channel; + unsigned int adc_channel; + enum adc_tm5_cal_method cal_method; + unsigned int prescale; + unsigned int hw_settle_time; + unsigned int decimation; /* For Gen2 ADC_TM */ + unsigned int avg_samples; /* For Gen2 ADC_TM */ + bool high_thr_en; /* For Gen2 ADC_TM */ + bool low_thr_en; /* For Gen2 ADC_TM */ + bool meas_en; /* For Gen2 ADC_TM */ + struct iio_channel *iio; + struct adc_tm5_chip *chip; + struct thermal_zone_device *tzd; +}; + +/** + * struct adc_tm5_chip - ADC Thermal Monitoring properties + * @regmap: SPMI ADC5 Thermal Monitoring peripheral register map field. + * @dev: SPMI ADC5 device. + * @data: software configuration data. + * @channels: array of ADC TM channel data. + * @nchannels: amount of channels defined/allocated + * @decimation: sampling rate supported for the channel. + * Applies to all channels, used only on Gen1 ADC_TM. + * @avg_samples: ability to provide single result from the ADC + * that is an average of multiple measurements. Applies to all + * channels, used only on Gen1 ADC_TM. + * @base: base address of TM registers. + * @adc_mutex_lock: ADC_TM mutex lock, used only on Gen2 ADC_TM. + * It is used to ensure only one ADC channel configuration + * is done at a time using the shared set of configuration + * registers. + */ +struct adc_tm5_chip { + struct regmap *regmap; + struct device *dev; + const struct adc_tm5_data *data; + struct adc_tm5_channel *channels; + unsigned int nchannels; + unsigned int decimation; + unsigned int avg_samples; + u16 base; + struct mutex adc_mutex_lock; +}; + +static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len) +{ + return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len); +} + +static int adc_tm5_write(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len) +{ + return regmap_bulk_write(adc_tm->regmap, adc_tm->base + offset, data, len); +} + +static int adc_tm5_reg_update(struct adc_tm5_chip *adc_tm, u16 offset, u8 mask, u8 val) +{ + return regmap_write_bits(adc_tm->regmap, adc_tm->base + offset, mask, val); +} + +static irqreturn_t adc_tm5_isr(int irq, void *data) +{ + struct adc_tm5_chip *chip = data; + u8 status_low, status_high, ctl; + int ret, i; + + ret = adc_tm5_read(chip, ADC_TM5_STATUS_LOW, &status_low, sizeof(status_low)); + if (unlikely(ret)) { + dev_err(chip->dev, "read status low failed: %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_read(chip, ADC_TM5_STATUS_HIGH, &status_high, sizeof(status_high)); + if (unlikely(ret)) { + dev_err(chip->dev, "read status high failed: %d\n", ret); + return IRQ_HANDLED; + } + + for (i = 0; i < chip->nchannels; i++) { + bool upper_set = false, lower_set = false; + unsigned int ch = chip->channels[i].channel; + + /* No TZD, we warned at the boot time */ + if (!chip->channels[i].tzd) + continue; + + ret = adc_tm5_read(chip, ADC_TM5_M_EN(ch), &ctl, sizeof(ctl)); + if (unlikely(ret)) { + dev_err(chip->dev, "ctl read failed: %d, channel %d\n", ret, i); + continue; + } + + if (!(ctl & ADC_TM5_M_MEAS_EN)) + continue; + + lower_set = (status_low & BIT(ch)) && + (ctl & ADC_TM5_M_LOW_THR_INT_EN); + + upper_set = (status_high & BIT(ch)) && + (ctl & ADC_TM5_M_HIGH_THR_INT_EN); + + if (upper_set || lower_set) + thermal_zone_device_update(chip->channels[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } + + return IRQ_HANDLED; +} + +static irqreturn_t adc_tm5_gen2_isr(int irq, void *data) +{ + struct adc_tm5_chip *chip = data; + u8 status_low, status_high; + int ret, i; + + ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low)); + if (ret) { + dev_err(chip->dev, "read status_low failed: %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high)); + if (ret) { + dev_err(chip->dev, "read status_high failed: %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low)); + if (ret < 0) { + dev_err(chip->dev, "clear status low failed with %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high)); + if (ret < 0) { + dev_err(chip->dev, "clear status high failed with %d\n", ret); + return IRQ_HANDLED; + } + + for (i = 0; i < chip->nchannels; i++) { + bool upper_set = false, lower_set = false; + unsigned int ch = chip->channels[i].channel; + + /* No TZD, we warned at the boot time */ + if (!chip->channels[i].tzd) + continue; + + if (!chip->channels[i].meas_en) + continue; + + lower_set = (status_low & BIT(ch)) && + (chip->channels[i].low_thr_en); + + upper_set = (status_high & BIT(ch)) && + (chip->channels[i].high_thr_en); + + if (upper_set || lower_set) + thermal_zone_device_update(chip->channels[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } + + return IRQ_HANDLED; +} + +static int adc_tm5_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct adc_tm5_channel *channel = tz->devdata; + int ret; + + if (!channel || !channel->iio) + return -EINVAL; + + ret = iio_read_channel_processed(channel->iio, temp); + if (ret < 0) + return ret; + + if (ret != IIO_VAL_INT) + return -EINVAL; + + return 0; +} + +static int adc_tm5_disable_channel(struct adc_tm5_channel *channel) +{ + struct adc_tm5_chip *chip = channel->chip; + unsigned int reg = ADC_TM5_M_EN(channel->channel); + + return adc_tm5_reg_update(chip, reg, + ADC_TM5_M_MEAS_EN | + ADC_TM5_M_HIGH_THR_INT_EN | + ADC_TM5_M_LOW_THR_INT_EN, + 0); +} + +#define ADC_TM_GEN2_POLL_DELAY_MIN_US 100 +#define ADC_TM_GEN2_POLL_DELAY_MAX_US 110 +#define ADC_TM_GEN2_POLL_RETRY_COUNT 3 + +static int32_t adc_tm5_gen2_conv_req(struct adc_tm5_chip *chip) +{ + int ret; + u8 data; + unsigned int count; + + data = ADC_TM_GEN2_EN; + ret = adc_tm5_write(chip, ADC_TM_GEN2_EN_CTL1, &data, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm enable failed with %d\n", ret); + return ret; + } + + data = ADC_TM_GEN2_CFG_HS_FLAG; + ret = adc_tm5_write(chip, ADC_TM_GEN2_CFG_HS_SET, &data, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm handshake failed with %d\n", ret); + return ret; + } + + data = ADC_TM_GEN2_CONV_REQ_EN; + ret = adc_tm5_write(chip, ADC_TM_GEN2_CONV_REQ, &data, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm request conversion failed with %d\n", ret); + return ret; + } + + /* + * SW sets a handshake bit and waits for PBS to clear it + * before the next conversion request can be queued. + */ + + for (count = 0; count < ADC_TM_GEN2_POLL_RETRY_COUNT; count++) { + ret = adc_tm5_read(chip, ADC_TM_GEN2_CFG_HS_SET, &data, sizeof(data)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm read failed with %d\n", ret); + return ret; + } + + if (!(data & ADC_TM_GEN2_CFG_HS_FLAG)) + return ret; + usleep_range(ADC_TM_GEN2_POLL_DELAY_MIN_US, + ADC_TM_GEN2_POLL_DELAY_MAX_US); + } + + dev_err(chip->dev, "adc-tm conversion request handshake timed out\n"); + + return -ETIMEDOUT; +} + +static int adc_tm5_gen2_disable_channel(struct adc_tm5_channel *channel) +{ + struct adc_tm5_chip *chip = channel->chip; + int ret; + u8 val; + + mutex_lock(&chip->adc_mutex_lock); + + channel->meas_en = false; + channel->high_thr_en = false; + channel->low_thr_en = false; + + ret = adc_tm5_read(chip, ADC_TM_GEN2_CH_CTL, &val, sizeof(val)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm block read failed with %d\n", ret); + goto disable_fail; + } + + val &= ~ADC_TM_GEN2_TM_CH_SEL; + val |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel); + + ret = adc_tm5_write(chip, ADC_TM_GEN2_CH_CTL, &val, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm channel disable failed with %d\n", ret); + goto disable_fail; + } + + val = 0; + ret = adc_tm5_write(chip, ADC_TM_GEN2_MEAS_IRQ_EN, &val, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm interrupt disable failed with %d\n", ret); + goto disable_fail; + } + + + ret = adc_tm5_gen2_conv_req(channel->chip); + if (ret < 0) + dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret); + +disable_fail: + mutex_unlock(&chip->adc_mutex_lock); + return ret; +} + +static int adc_tm5_enable(struct adc_tm5_chip *chip) +{ + int ret; + u8 data; + + data = ADC_TM_EN; + ret = adc_tm5_write(chip, ADC_TM_EN_CTL1, &data, sizeof(data)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm enable failed\n"); + return ret; + } + + data = ADC_TM_CONV_REQ_EN; + ret = adc_tm5_write(chip, ADC_TM_CONV_REQ, &data, sizeof(data)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm request conversion failed\n"); + return ret; + } + + return 0; +} + +static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high) +{ + struct adc_tm5_chip *chip = channel->chip; + u8 buf[8]; + u16 reg = ADC_TM5_M_ADC_CH_SEL_CTL(channel->channel); + int ret; + + ret = adc_tm5_read(chip, reg, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "channel %d params read failed: %d\n", channel->channel, ret); + return ret; + } + + buf[0] = channel->adc_channel; + + /* High temperature corresponds to low voltage threshold */ + if (high != INT_MAX) { + u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale, + chip->data->full_scale_code_volt, high); + + put_unaligned_le16(adc_code, &buf[1]); + buf[7] |= ADC_TM5_M_LOW_THR_INT_EN; + } else { + buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN; + } + + /* Low temperature corresponds to high voltage threshold */ + if (low != -INT_MAX) { + u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale, + chip->data->full_scale_code_volt, low); + + put_unaligned_le16(adc_code, &buf[3]); + buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN; + } else { + buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN; + } + + buf[5] = ADC5_TIMER_SEL_2; + + /* Set calibration select, hw_settle delay */ + buf[6] &= ~ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK; + buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK, channel->hw_settle_time); + buf[6] &= ~ADC_TM5_M_CTL_CAL_SEL_MASK; + buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_CAL_SEL_MASK, channel->cal_method); + + buf[7] |= ADC_TM5_M_MEAS_EN; + + ret = adc_tm5_write(chip, reg, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret); + return ret; + } + + return adc_tm5_enable(chip); +} + +static int adc_tm5_gen2_configure(struct adc_tm5_channel *channel, int low, int high) +{ + struct adc_tm5_chip *chip = channel->chip; + int ret; + u8 buf[14]; + u16 adc_code; + + mutex_lock(&chip->adc_mutex_lock); + + channel->meas_en = true; + + ret = adc_tm5_read(chip, ADC_TM_GEN2_SID, buf, sizeof(buf)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm block read failed with %d\n", ret); + goto config_fail; + } + + /* Set SID from virtual channel number */ + buf[0] = channel->adc_channel >> 8; + + /* Set TM channel number used and measurement interval */ + buf[1] &= ~ADC_TM_GEN2_TM_CH_SEL; + buf[1] |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel); + buf[1] &= ~ADC_TM_GEN2_MEAS_INT_SEL; + buf[1] |= FIELD_PREP(ADC_TM_GEN2_MEAS_INT_SEL, MEAS_INT_1S); + + buf[2] &= ~ADC_TM_GEN2_CTL_DEC_RATIO_MASK; + buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_DEC_RATIO_MASK, channel->decimation); + buf[2] &= ~ADC_TM_GEN2_CTL_CAL_SEL; + buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_CAL_SEL, channel->cal_method); + + buf[3] = channel->avg_samples | ADC_TM_GEN2_FAST_AVG_EN; + + buf[4] = channel->adc_channel & 0xff; + + buf[5] = channel->hw_settle_time & ADC_TM_GEN2_HW_SETTLE_DELAY; + + /* High temperature corresponds to low voltage threshold */ + if (high != INT_MAX) { + channel->low_thr_en = true; + adc_code = qcom_adc_tm5_gen2_temp_res_scale(high); + put_unaligned_le16(adc_code, &buf[9]); + } else { + channel->low_thr_en = false; + } + + /* Low temperature corresponds to high voltage threshold */ + if (low != -INT_MAX) { + channel->high_thr_en = true; + adc_code = qcom_adc_tm5_gen2_temp_res_scale(low); + put_unaligned_le16(adc_code, &buf[11]); + } else { + channel->high_thr_en = false; + } + + buf[13] = ADC_TM_GEN2_MEAS_EN; + if (channel->high_thr_en) + buf[13] |= ADC_TM5_GEN2_HIGH_THR_INT_EN; + if (channel->low_thr_en) + buf[13] |= ADC_TM5_GEN2_LOW_THR_INT_EN; + + ret = adc_tm5_write(chip, ADC_TM_GEN2_SID, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret); + goto config_fail; + } + + ret = adc_tm5_gen2_conv_req(channel->chip); + if (ret < 0) + dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret); + +config_fail: + mutex_unlock(&chip->adc_mutex_lock); + return ret; +} + +static int adc_tm5_set_trips(struct thermal_zone_device *tz, int low, int high) +{ + struct adc_tm5_channel *channel = tz->devdata; + struct adc_tm5_chip *chip; + int ret; + + if (!channel) + return -EINVAL; + + chip = channel->chip; + dev_dbg(chip->dev, "%d:low(mdegC):%d, high(mdegC):%d\n", + channel->channel, low, high); + + if (high == INT_MAX && low <= -INT_MAX) + ret = chip->data->disable_channel(channel); + else + ret = chip->data->configure(channel, low, high); + + return ret; +} + +static const struct thermal_zone_device_ops adc_tm5_thermal_ops = { + .get_temp = adc_tm5_get_temp, + .set_trips = adc_tm5_set_trips, +}; + +static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm) +{ + unsigned int i; + struct thermal_zone_device *tzd; + + for (i = 0; i < adc_tm->nchannels; i++) { + adc_tm->channels[i].chip = adc_tm; + tzd = devm_thermal_of_zone_register(adc_tm->dev, + adc_tm->channels[i].channel, + &adc_tm->channels[i], + &adc_tm5_thermal_ops); + if (IS_ERR(tzd)) { + if (PTR_ERR(tzd) == -ENODEV) { + dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n", + adc_tm->channels[i].channel); + continue; + } + + dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n", + adc_tm->channels[i].channel, PTR_ERR(tzd)); + return PTR_ERR(tzd); + } + adc_tm->channels[i].tzd = tzd; + if (devm_thermal_add_hwmon_sysfs(tzd)) + dev_warn(adc_tm->dev, + "Failed to add hwmon sysfs attributes\n"); + } + + return 0; +} + +static int adc_tm_hc_init(struct adc_tm5_chip *chip) +{ + unsigned int i; + u8 buf[2]; + int ret; + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= ADC_TM5_NUM_CHANNELS) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + buf[0] = chip->decimation; + buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN; + + ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf)); + if (ret) + dev_err(chip->dev, "block write failed: %d\n", ret); + + return ret; +} + +static int adc_tm5_init(struct adc_tm5_chip *chip) +{ + u8 buf[4], channels_available; + int ret; + unsigned int i; + + ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM, + &channels_available, sizeof(channels_available)); + if (ret) { + dev_err(chip->dev, "read failed for BTM channels\n"); + return ret; + } + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= channels_available) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + buf[0] = chip->decimation; + buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN; + buf[2] = ADC_TM5_TIMER1; + buf[3] = FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL2_MASK, ADC_TM5_TIMER2) | + FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL3_MASK, ADC_TM5_TIMER3); + + ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "block write failed: %d\n", ret); + return ret; + } + + return ret; +} + +static int adc_tm5_gen2_init(struct adc_tm5_chip *chip) +{ + u8 channels_available; + int ret; + unsigned int i; + + ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM, + &channels_available, sizeof(channels_available)); + if (ret) { + dev_err(chip->dev, "read failed for BTM channels\n"); + return ret; + } + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= channels_available) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + mutex_init(&chip->adc_mutex_lock); + + return ret; +} + +static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm, + struct adc_tm5_channel *channel, + struct device_node *node) +{ + const char *name = node->name; + u32 chan, value, adc_channel, varr[2]; + int ret; + struct device *dev = adc_tm->dev; + struct of_phandle_args args; + + ret = of_property_read_u32(node, "reg", &chan); + if (ret) { + dev_err(dev, "%s: invalid channel number %d\n", name, ret); + return ret; + } + + if (chan >= ADC_TM5_NUM_CHANNELS) { + dev_err(dev, "%s: channel number too big: %d\n", name, chan); + return -EINVAL; + } + + channel->channel = chan; + + /* + * We are tied to PMIC's ADC controller, which always use single + * argument for channel number. So don't bother parsing + * #io-channel-cells, just enforce cell_count = 1. + */ + ret = of_parse_phandle_with_fixed_args(node, "io-channels", 1, 0, &args); + if (ret < 0) { + dev_err(dev, "%s: error parsing ADC channel number %d: %d\n", name, chan, ret); + return ret; + } + of_node_put(args.np); + + if (args.args_count != 1) { + dev_err(dev, "%s: invalid args count for ADC channel %d\n", name, chan); + return -EINVAL; + } + + adc_channel = args.args[0]; + if (adc_tm->data->gen == ADC_TM5_GEN2) + adc_channel &= 0xff; + + if (adc_channel >= ADC5_MAX_CHANNEL) { + dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan); + return -EINVAL; + } + channel->adc_channel = args.args[0]; + + channel->iio = devm_fwnode_iio_channel_get_by_name(adc_tm->dev, + of_fwnode_handle(node), NULL); + if (IS_ERR(channel->iio)) { + ret = PTR_ERR(channel->iio); + if (ret != -EPROBE_DEFER) + dev_err(dev, "%s: error getting channel: %d\n", name, ret); + return ret; + } + + ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2); + if (!ret) { + ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]); + if (ret < 0) { + dev_err(dev, "%s: invalid pre-scaling <%d %d>\n", + name, varr[0], varr[1]); + return ret; + } + channel->prescale = ret; + } else { + /* 1:1 prescale is index 0 */ + channel->prescale = 0; + } + + ret = of_property_read_u32(node, "qcom,hw-settle-time-us", &value); + if (!ret) { + ret = qcom_adc5_hw_settle_time_from_dt(value, adc_tm->data->hw_settle); + if (ret < 0) { + dev_err(dev, "%s invalid hw-settle-time-us %d us\n", + name, value); + return ret; + } + channel->hw_settle_time = ret; + } else { + channel->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; + } + + if (of_property_read_bool(node, "qcom,ratiometric")) + channel->cal_method = ADC_TM5_RATIOMETRIC_CAL; + else + channel->cal_method = ADC_TM5_ABSOLUTE_CAL; + + if (adc_tm->data->gen == ADC_TM5_GEN2) { + ret = of_property_read_u32(node, "qcom,decimation", &value); + if (!ret) { + ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation); + if (ret < 0) { + dev_err(dev, "invalid decimation %d\n", value); + return ret; + } + channel->decimation = ret; + } else { + channel->decimation = ADC5_DECIMATION_DEFAULT; + } + + ret = of_property_read_u32(node, "qcom,avg-samples", &value); + if (!ret) { + ret = qcom_adc5_avg_samples_from_dt(value); + if (ret < 0) { + dev_err(dev, "invalid avg-samples %d\n", value); + return ret; + } + channel->avg_samples = ret; + } else { + channel->avg_samples = VADC_DEF_AVG_SAMPLES; + } + } + + return 0; +} + +static const struct adc_tm5_data adc_tm5_data_pmic = { + .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 250, 420, 840 }, + .hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 8000, 16000, 32000, + 64000, 128000 }, + .disable_channel = adc_tm5_disable_channel, + .configure = adc_tm5_configure, + .isr = adc_tm5_isr, + .init = adc_tm5_init, + .irq_name = "pm-adc-tm5", + .gen = ADC_TM5, +}; + +static const struct adc_tm5_data adc_tm_hc_data_pmic = { + .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 256, 512, 1024 }, + .hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 6000, 8000, 10000 }, + .disable_channel = adc_tm5_disable_channel, + .configure = adc_tm5_configure, + .isr = adc_tm5_isr, + .init = adc_tm_hc_init, + .irq_name = "pm-adc-tm5", + .gen = ADC_TM_HC, +}; + +static const struct adc_tm5_data adc_tm5_gen2_data_pmic = { + .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 85, 340, 1360 }, + .hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 8000, 16000, 32000, + 64000, 128000 }, + .disable_channel = adc_tm5_gen2_disable_channel, + .configure = adc_tm5_gen2_configure, + .isr = adc_tm5_gen2_isr, + .init = adc_tm5_gen2_init, + .irq_name = "pm-adc-tm5-gen2", + .gen = ADC_TM5_GEN2, +}; + +static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node) +{ + struct adc_tm5_channel *channels; + struct device_node *child; + u32 value; + int ret; + struct device *dev = adc_tm->dev; + + adc_tm->nchannels = of_get_available_child_count(node); + if (!adc_tm->nchannels) + return -EINVAL; + + adc_tm->channels = devm_kcalloc(dev, adc_tm->nchannels, + sizeof(*adc_tm->channels), GFP_KERNEL); + if (!adc_tm->channels) + return -ENOMEM; + + channels = adc_tm->channels; + + adc_tm->data = of_device_get_match_data(dev); + if (!adc_tm->data) + adc_tm->data = &adc_tm5_data_pmic; + + ret = of_property_read_u32(node, "qcom,decimation", &value); + if (!ret) { + ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation); + if (ret < 0) { + dev_err(dev, "invalid decimation %d\n", value); + return ret; + } + adc_tm->decimation = ret; + } else { + adc_tm->decimation = ADC5_DECIMATION_DEFAULT; + } + + ret = of_property_read_u32(node, "qcom,avg-samples", &value); + if (!ret) { + ret = qcom_adc5_avg_samples_from_dt(value); + if (ret < 0) { + dev_err(dev, "invalid avg-samples %d\n", value); + return ret; + } + adc_tm->avg_samples = ret; + } else { + adc_tm->avg_samples = VADC_DEF_AVG_SAMPLES; + } + + for_each_available_child_of_node(node, child) { + ret = adc_tm5_get_dt_channel_data(adc_tm, channels, child); + if (ret) { + of_node_put(child); + return ret; + } + + channels++; + } + + return 0; +} + +static int adc_tm5_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct adc_tm5_chip *adc_tm; + struct regmap *regmap; + int ret, irq; + u32 reg; + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) + return -ENODEV; + + ret = of_property_read_u32(node, "reg", ®); + if (ret) + return ret; + + adc_tm = devm_kzalloc(&pdev->dev, sizeof(*adc_tm), GFP_KERNEL); + if (!adc_tm) + return -ENOMEM; + + adc_tm->regmap = regmap; + adc_tm->dev = dev; + adc_tm->base = reg; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = adc_tm5_get_dt_data(adc_tm, node); + if (ret) { + dev_err(dev, "get dt data failed: %d\n", ret); + return ret; + } + + ret = adc_tm->data->init(adc_tm); + if (ret) { + dev_err(dev, "adc-tm init failed\n"); + return ret; + } + + ret = adc_tm5_register_tzd(adc_tm); + if (ret) { + dev_err(dev, "tzd register failed\n"); + return ret; + } + + return devm_request_threaded_irq(dev, irq, NULL, adc_tm->data->isr, + IRQF_ONESHOT, adc_tm->data->irq_name, adc_tm); +} + +static const struct of_device_id adc_tm5_match_table[] = { + { + .compatible = "qcom,spmi-adc-tm5", + .data = &adc_tm5_data_pmic, + }, + { + .compatible = "qcom,spmi-adc-tm-hc", + .data = &adc_tm_hc_data_pmic, + }, + { + .compatible = "qcom,spmi-adc-tm5-gen2", + .data = &adc_tm5_gen2_data_pmic, + }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_tm5_match_table); + +static struct platform_driver adc_tm5_driver = { + .driver = { + .name = "qcom-spmi-adc-tm5", + .of_match_table = adc_tm5_match_table, + }, + .probe = adc_tm5_probe, +}; +module_platform_driver(adc_tm5_driver); + +MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver"); +MODULE_LICENSE("GPL v2"); |