Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

131 files changed, 46194 insertions, 0 deletions

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
new file mode 100644
index 000000000..e052dae61
--- /dev/null
+++ b/drivers/thermal/Kconfig
@@ -0,0 +1,507 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Generic thermal drivers configuration
+#
+
+menuconfig THERMAL
+	bool "Thermal drivers"
+	help
+	  Thermal drivers offer a generic mechanism for
+	  thermal management. Usually it's made up of one or more thermal
+	  zones and cooling devices.
+	  Each thermal zone contains its own temperature, trip points,
+	  and cooling devices.
+	  All platforms with ACPI or Open Firmware thermal support can use
+	  this driver.
+	  If you want this support, you should say Y here.
+
+if THERMAL
+
+config THERMAL_NETLINK
+	bool "Thermal netlink management"
+	depends on NET
+	help
+	  The thermal framework has a netlink interface to do thermal
+	  zones discovery, temperature readings and events such as
+	  trip point crossed, cooling device update or governor
+	  change. It is recommended to enable the feature.
+
+config THERMAL_STATISTICS
+	bool "Thermal state transition statistics"
+	help
+	  Export thermal state transition statistics information through sysfs.
+
+	  If in doubt, say N.
+
+config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
+	int "Emergency poweroff delay in milli-seconds"
+	default 0
+	help
+	  Thermal subsystem will issue a graceful shutdown when
+	  critical temperatures are reached using orderly_poweroff(). In
+	  case of failure of an orderly_poweroff(), the thermal emergency
+	  poweroff kicks in after a delay has elapsed and shuts down the system.
+	  This config is number of milliseconds to delay before emergency
+	  poweroff kicks in. Similarly to the critical trip point,
+	  the delay should be carefully profiled so as to give adequate
+	  time for orderly_poweroff() to finish on regular execution.
+	  If set to 0 emergency poweroff will not be supported.
+
+	  In doubt, leave as 0.
+
+config THERMAL_HWMON
+	bool
+	prompt "Expose thermal sensors as hwmon device"
+	depends on HWMON=y || HWMON=THERMAL
+	default y
+	help
+	  In case a sensor is registered with the thermal
+	  framework, this option will also register it
+	  as a hwmon. The sensor will then have the common
+	  hwmon sysfs interface.
+
+	  Say 'Y' here if you want all thermal sensors to
+	  have hwmon sysfs interface too.
+
+config THERMAL_OF
+	bool
+	prompt "APIs to parse thermal data out of device tree"
+	depends on OF
+	default y
+	help
+	  This options provides helpers to add the support to
+	  read and parse thermal data definitions out of the
+	  device tree blob.
+
+	  Say 'Y' here if you need to build thermal infrastructure
+	  based on device tree.
+
+config THERMAL_WRITABLE_TRIPS
+	bool "Enable writable trip points"
+	help
+	  This option allows the system integrator to choose whether
+	  trip temperatures can be changed from userspace. The
+	  writable trips need to be specified when setting up the
+	  thermal zone but the choice here takes precedence.
+
+	  Say 'Y' here if you would like to allow userspace tools to
+	  change trip temperatures.
+
+choice
+	prompt "Default Thermal governor"
+	default THERMAL_DEFAULT_GOV_STEP_WISE
+	help
+	  This option sets which thermal governor shall be loaded at
+	  startup. If in doubt, select 'step_wise'.
+
+config THERMAL_DEFAULT_GOV_STEP_WISE
+	bool "step_wise"
+	select THERMAL_GOV_STEP_WISE
+	help
+	  Use the step_wise governor as default. This throttles the
+	  devices one step at a time.
+
+config THERMAL_DEFAULT_GOV_FAIR_SHARE
+	bool "fair_share"
+	select THERMAL_GOV_FAIR_SHARE
+	help
+	  Use the fair_share governor as default. This throttles the
+	  devices based on their 'contribution' to a zone. The
+	  contribution should be provided through platform data.
+
+config THERMAL_DEFAULT_GOV_USER_SPACE
+	bool "user_space"
+	select THERMAL_GOV_USER_SPACE
+	help
+	  The Userspace governor allows to get trip point crossed
+	  notification from the kernel via uevents. It is recommended
+	  to use the netlink interface instead which gives richer
+	  information about the thermal framework events.
+
+config THERMAL_DEFAULT_GOV_POWER_ALLOCATOR
+	bool "power_allocator"
+	depends on THERMAL_GOV_POWER_ALLOCATOR
+	help
+	  Select this if you want to control temperature based on
+	  system and device power allocation. This governor can only
+	  operate on cooling devices that implement the power API.
+
+endchoice
+
+config THERMAL_GOV_FAIR_SHARE
+	bool "Fair-share thermal governor"
+	help
+	  Enable this to manage platform thermals using fair-share governor.
+
+config THERMAL_GOV_STEP_WISE
+	bool "Step_wise thermal governor"
+	help
+	  Enable this to manage platform thermals using a simple linear
+	  governor.
+
+config THERMAL_GOV_BANG_BANG
+	bool "Bang Bang thermal governor"
+	default n
+	help
+	  Enable this to manage platform thermals using bang bang governor.
+
+	  Say 'Y' here if you want to use two point temperature regulation
+	  used for fans without throttling.  Some fan drivers depend on this
+	  governor to be enabled (e.g. acerhdf).
+
+config THERMAL_GOV_USER_SPACE
+	bool "User_space thermal governor"
+	help
+	  Enable this to let the user space manage the platform thermals.
+
+config THERMAL_GOV_POWER_ALLOCATOR
+	bool "Power allocator thermal governor"
+	depends on ENERGY_MODEL
+	help
+	  Enable this to manage platform thermals by dynamically
+	  allocating and limiting power to devices.
+
+config CPU_THERMAL
+	bool "Generic cpu cooling support"
+	depends on THERMAL_OF
+	help
+	  Enable the CPU cooling features. If the system has no active
+	  cooling device available, this option allows to use the CPU
+	  as a cooling device.
+
+if CPU_THERMAL
+
+config CPU_FREQ_THERMAL
+	bool "CPU frequency cooling device"
+	depends on CPU_FREQ
+	default y
+	help
+	  This implements the generic cpu cooling mechanism through frequency
+	  reduction. An ACPI version of this already exists
+	  (drivers/acpi/processor_thermal.c).
+	  This will be useful for platforms using the generic thermal interface
+	  and not the ACPI interface.
+
+config CPU_IDLE_THERMAL
+	bool "CPU idle cooling device"
+	depends on IDLE_INJECT
+	help
+	  This implements the CPU cooling mechanism through
+	  idle injection. This will throttle the CPU by injecting
+	  idle cycle.
+endif
+
+config DEVFREQ_THERMAL
+	bool "Generic device cooling support"
+	depends on PM_DEVFREQ
+	depends on PM_OPP
+	help
+	  This implements the generic devfreq cooling mechanism through
+	  frequency reduction for devices using devfreq.
+
+	  This will throttle the device by limiting the maximum allowed DVFS
+	  frequency corresponding to the cooling level.
+
+	  In order to use the power extensions of the cooling device,
+	  devfreq should use the simple_ondemand governor.
+
+	  If you want this support, you should say Y here.
+
+config THERMAL_EMULATION
+	bool "Thermal emulation mode support"
+	help
+	  Enable this option to make a emul_temp sysfs node in thermal zone
+	  directory to support temperature emulation. With emulation sysfs node,
+	  user can manually input temperature and test the different trip
+	  threshold behaviour for simulation purpose.
+
+	  WARNING: Be careful while enabling this option on production systems,
+	  because userland can easily disable the thermal policy by simply
+	  flooding this sysfs node with low temperature values.
+
+config THERMAL_MMIO
+	tristate "Generic Thermal MMIO driver"
+	depends on OF
+	depends on HAS_IOMEM
+	help
+	  This option enables the generic thermal MMIO driver that will use
+	  memory-mapped reads to get the temperature.  Any HW/System that
+	  allows temperature reading by a single memory-mapped reading, be it
+	  register or shared memory, is a potential candidate to work with this
+	  driver.
+
+config HISI_THERMAL
+	tristate "Hisilicon thermal driver"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	default y
+	help
+	  Enable this to plug hisilicon's thermal sensor driver into the Linux
+	  thermal framework. cpufreq is used as the cooling device to throttle
+	  CPUs when the passive trip is crossed.
+
+config IMX_THERMAL
+	tristate "Temperature sensor driver for Freescale i.MX SoCs"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on NVMEM || !NVMEM
+	depends on MFD_SYSCON
+	depends on OF
+	help
+	  Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
+	  It supports one critical trip point and one passive trip point.  The
+	  cpufreq is used as the cooling device to throttle CPUs when the
+	  passive trip is crossed.
+
+config IMX_SC_THERMAL
+	tristate "Temperature sensor driver for NXP i.MX SoCs with System Controller"
+	depends on IMX_SCU
+	depends on OF
+	help
+	  Support for Temperature Monitor (TEMPMON) found on NXP i.MX SoCs with
+	  system controller inside, Linux kernel has to communicate with system
+	  controller via MU (message unit) IPC to get temperature from thermal
+	  sensor. It supports one critical trip point and one
+	  passive trip point for each thermal sensor.
+
+config IMX8MM_THERMAL
+	tristate "Temperature sensor driver for Freescale i.MX8MM SoC"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on OF
+	help
+	  Support for Thermal Monitoring Unit (TMU) found on Freescale i.MX8MM SoC.
+	  It supports one critical trip point and one passive trip point. The
+	  cpufreq is used as the cooling device to throttle CPUs when the passive
+	  trip is crossed.
+
+config K3_THERMAL
+	tristate "Texas Instruments K3 thermal support"
+	depends on ARCH_K3 || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  K3 SoC family. The current chip supported is:
+	  - AM654
+
+	  This includes temperature reading functionality.
+
+config MAX77620_THERMAL
+	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
+	depends on MFD_MAX77620
+	depends on OF
+	help
+	  Support for die junction temperature warning alarm for Maxim
+	  Semiconductor PMIC MAX77620 device. Device generates two alarm
+	  interrupts when PMIC die temperature cross the threshold of
+	  120 degC and 140 degC.
+
+config QORIQ_THERMAL
+	tristate "QorIQ Thermal Monitoring Unit"
+	depends on THERMAL_OF && HAS_IOMEM
+	depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || (ARCH_MXC && ARM64) || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms.
+	  It supports one critical trip point and one passive trip point. The
+	  cpufreq is used as the cooling device to throttle CPUs when the
+	  passive trip is crossed.
+
+config SPEAR_THERMAL
+	tristate "SPEAr thermal sensor driver"
+	depends on PLAT_SPEAR || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the SPEAr thermal sensor driver into the Linux
+	  thermal framework.
+
+config SUN8I_THERMAL
+	tristate "Allwinner sun8i thermal driver"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on NVMEM
+	depends on OF
+	depends on RESET_CONTROLLER
+	help
+	  Support for the sun8i thermal sensor driver into the Linux thermal
+	  framework.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun8i-thermal.
+
+config ROCKCHIP_THERMAL
+	tristate "Rockchip thermal driver"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on RESET_CONTROLLER
+	depends on HAS_IOMEM
+	help
+	  Rockchip thermal driver provides support for Temperature sensor
+	  ADC (TS-ADC) found on Rockchip SoCs. It supports one critical
+	  trip point. Cpufreq is used as the cooling device and will throttle
+	  CPUs when the Temperature crosses the passive trip point.
+
+config RCAR_THERMAL
+	tristate "Renesas R-Car thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Enable this to plug the R-Car thermal sensor driver into the Linux
+	  thermal framework.
+
+config RCAR_GEN3_THERMAL
+	tristate "Renesas R-Car Gen3 and RZ/G2 thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the R-Car Gen3 or RZ/G2 thermal sensor driver into
+	  the Linux thermal framework.
+
+config RZG2L_THERMAL
+	tristate "Renesas RZ/G2L thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the RZ/G2L thermal sensor driver into the Linux
+	  thermal framework.
+
+config KIRKWOOD_THERMAL
+	tristate "Temperature sensor on Marvell Kirkwood SoCs"
+	depends on MACH_KIRKWOOD || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Support for the Kirkwood thermal sensor driver into the Linux thermal
+	  framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
+
+config DOVE_THERMAL
+	tristate "Temperature sensor on Marvell Dove SoCs"
+	depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Support for the Dove thermal sensor driver in the Linux thermal
+	  framework.
+
+config DB8500_THERMAL
+	tristate "DB8500 thermal management"
+	depends on MFD_DB8500_PRCMU && OF
+	default y
+	help
+	  Adds DB8500 thermal management implementation according to the thermal
+	  management framework. A thermal zone with several trip points will be
+	  created. Cooling devices can be bound to the trip points to cool this
+	  thermal zone if trip points reached.
+
+config ARMADA_THERMAL
+	tristate "Marvell EBU Armada SoCs thermal management"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this option if you want to have support for thermal management
+	  controller present in Marvell EBU Armada SoCs (370,375,XP,38x,7K,8K).
+
+config DA9062_THERMAL
+	tristate "DA9062/DA9061 Dialog Semiconductor thermal driver"
+	depends on MFD_DA9062 || COMPILE_TEST
+	depends on OF
+	help
+	  Enable this for the Dialog Semiconductor thermal sensor driver.
+	  This will report PMIC junction over-temperature for one thermal trip
+	  zone.
+	  Compatible with the DA9062 and DA9061 PMICs.
+
+config MTK_THERMAL
+	tristate "Temperature sensor driver for mediatek SoCs"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on NVMEM || NVMEM=n
+	depends on RESET_CONTROLLER
+	default y
+	help
+	  Enable this option if you want to have support for thermal management
+	  controller present in Mediatek SoCs
+
+config AMLOGIC_THERMAL
+	tristate "Amlogic Thermal Support"
+	default ARCH_MESON
+	depends on OF && ARCH_MESON
+	help
+	  If you say yes here you get support for Amlogic Thermal
+	  for G12 SoC Family.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called amlogic_thermal.
+
+menu "Intel thermal drivers"
+depends on X86 || X86_INTEL_QUARK || COMPILE_TEST
+source "drivers/thermal/intel/Kconfig"
+endmenu
+
+menu "Broadcom thermal drivers"
+depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM_IPROC || \
+		COMPILE_TEST
+source "drivers/thermal/broadcom/Kconfig"
+endmenu
+
+menu "Texas Instruments thermal drivers"
+depends on ARCH_HAS_BANDGAP || COMPILE_TEST
+depends on HAS_IOMEM
+source "drivers/thermal/ti-soc-thermal/Kconfig"
+endmenu
+
+menu "Samsung thermal drivers"
+depends on ARCH_EXYNOS || COMPILE_TEST
+source "drivers/thermal/samsung/Kconfig"
+endmenu
+
+menu "STMicroelectronics thermal drivers"
+depends on (ARCH_STI || ARCH_STM32) && OF
+source "drivers/thermal/st/Kconfig"
+endmenu
+
+source "drivers/thermal/tegra/Kconfig"
+
+config GENERIC_ADC_THERMAL
+	tristate "Generic ADC based thermal sensor"
+	depends on IIO
+	help
+	  This enabled a thermal sysfs driver for the temperature sensor
+	  which is connected to the General Purpose ADC. The ADC channel
+	  is read via IIO framework and the channel information is provided
+	  to this driver. This driver reports the temperature by reading ADC
+	  channel and converts it to temperature based on lookup table.
+
+menu "Qualcomm thermal drivers"
+depends on (ARCH_QCOM && OF) || COMPILE_TEST
+source "drivers/thermal/qcom/Kconfig"
+endmenu
+
+config UNIPHIER_THERMAL
+	tristate "Socionext UniPhier thermal driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on THERMAL_OF && MFD_SYSCON
+	help
+	  Enable this to plug in UniPhier on-chip PVT thermal driver into the
+	  thermal framework. The driver supports CPU thermal zone temperature
+	  reporting and a couple of trip points.
+
+config SPRD_THERMAL
+	tristate "Temperature sensor on Spreadtrum SoCs"
+	depends on ARCH_SPRD || COMPILE_TEST
+	help
+	  Support for the Spreadtrum thermal sensor driver in the Linux thermal
+	  framework.
+
+config KHADAS_MCU_FAN_THERMAL
+	tristate "Khadas MCU controller FAN cooling support"
+	depends on OF
+	depends on MFD_KHADAS_MCU
+	select MFD_CORE
+	select REGMAP
+	help
+	  If you say yes here you get support for the FAN controlled
+	  by the Microcontroller found on the Khadas VIM boards.
+
+endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
new file mode 100644
index 000000000..2506c6c8c
--- /dev/null
+++ b/drivers/thermal/Makefile
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for sensor chip drivers.
+#
+
+obj-$(CONFIG_THERMAL)		+= thermal_sys.o
+thermal_sys-y			+= thermal_core.o thermal_sysfs.o \
+					thermal_helpers.o
+
+# netlink interface to manage the thermal framework
+thermal_sys-$(CONFIG_THERMAL_NETLINK)		+= thermal_netlink.o
+
+# interface to/from other layers providing sensors
+thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
+thermal_sys-$(CONFIG_THERMAL_OF)		+= thermal_of.o
+
+# governors
+thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE)	+= gov_fair_share.o
+thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG)	+= gov_bang_bang.o
+thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE)	+= gov_step_wise.o
+thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE)	+= gov_user_space.o
+thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR)	+= gov_power_allocator.o
+
+# cpufreq cooling
+thermal_sys-$(CONFIG_CPU_FREQ_THERMAL)	+= cpufreq_cooling.o
+thermal_sys-$(CONFIG_CPU_IDLE_THERMAL)	+= cpuidle_cooling.o
+
+# devfreq cooling
+thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
+
+obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o k3_j72xx_bandgap.o
+# platform thermal drivers
+obj-y				+= broadcom/
+obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
+obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
+obj-$(CONFIG_SUN8I_THERMAL)     += sun8i_thermal.o
+obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
+obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
+obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
+obj-$(CONFIG_RZG2L_THERMAL)	+= rzg2l_thermal.o
+obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
+obj-y				+= samsung/
+obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
+obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
+obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
+obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
+obj-$(CONFIG_IMX_SC_THERMAL)	+= imx_sc_thermal.o
+obj-$(CONFIG_IMX8MM_THERMAL)	+= imx8mm_thermal.o
+obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
+obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
+obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
+obj-y				+= intel/
+obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
+obj-y				+= st/
+obj-y				+= qcom/
+obj-y				+= tegra/
+obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
+obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
+obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
+obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
+obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
+obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
+obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
new file mode 100644
index 000000000..d30cb791e
--- /dev/null
+++ b/drivers/thermal/amlogic_thermal.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Thermal Sensor Driver
+ *
+ * Copyright (C) 2017 Huan Biao <huan.biao@amlogic.com>
+ * Copyright (C) 2019 Guillaume La Roque <glaroque@baylibre.com>
+ *
+ * Register value to celsius temperature formulas:
+ *	Read_Val	    m * U
+ * U = ---------, Uptat = ---------
+ *	2^16		  1 + n * U
+ *
+ * Temperature = A * ( Uptat + u_efuse / 2^16 )- B
+ *
+ *  A B m n : calibration parameters
+ *  u_efuse : fused calibration value, it's a signed 16 bits value
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+#include "thermal_hwmon.h"
+
+#define TSENSOR_CFG_REG1			0x4
+	#define TSENSOR_CFG_REG1_RSET_VBG	BIT(12)
+	#define TSENSOR_CFG_REG1_RSET_ADC	BIT(11)
+	#define TSENSOR_CFG_REG1_VCM_EN		BIT(10)
+	#define TSENSOR_CFG_REG1_VBG_EN		BIT(9)
+	#define TSENSOR_CFG_REG1_OUT_CTL	BIT(6)
+	#define TSENSOR_CFG_REG1_FILTER_EN	BIT(5)
+	#define TSENSOR_CFG_REG1_DEM_EN		BIT(3)
+	#define TSENSOR_CFG_REG1_CH_SEL		GENMASK(1, 0)
+	#define TSENSOR_CFG_REG1_ENABLE		\
+		(TSENSOR_CFG_REG1_FILTER_EN |	\
+		 TSENSOR_CFG_REG1_VCM_EN |	\
+		 TSENSOR_CFG_REG1_VBG_EN |	\
+		 TSENSOR_CFG_REG1_DEM_EN |	\
+		 TSENSOR_CFG_REG1_CH_SEL)
+
+#define TSENSOR_STAT0			0x40
+
+#define TSENSOR_STAT9			0x64
+
+#define TSENSOR_READ_TEMP_MASK		GENMASK(15, 0)
+#define TSENSOR_TEMP_MASK		GENMASK(11, 0)
+
+#define TSENSOR_TRIM_SIGN_MASK		BIT(15)
+#define TSENSOR_TRIM_TEMP_MASK		GENMASK(14, 0)
+#define TSENSOR_TRIM_VERSION_MASK	GENMASK(31, 24)
+
+#define TSENSOR_TRIM_VERSION(_version)	\
+	FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version)
+
+#define TSENSOR_TRIM_CALIB_VALID_MASK	(GENMASK(3, 2) | BIT(7))
+
+#define TSENSOR_CALIB_OFFSET	1
+#define TSENSOR_CALIB_SHIFT	4
+
+/**
+ * struct amlogic_thermal_soc_calib_data
+ * @A: calibration parameters
+ * @B: calibration parameters
+ * @m: calibration parameters
+ * @n: calibration parameters
+ *
+ * This structure is required for configuration of amlogic thermal driver.
+ */
+struct amlogic_thermal_soc_calib_data {
+	int A;
+	int B;
+	int m;
+	int n;
+};
+
+/**
+ * struct amlogic_thermal_data
+ * @u_efuse_off: register offset to read fused calibration value
+ * @calibration_parameters: calibration parameters structure pointer
+ * @regmap_config: regmap config for the device
+ * This structure is required for configuration of amlogic thermal driver.
+ */
+struct amlogic_thermal_data {
+	int u_efuse_off;
+	const struct amlogic_thermal_soc_calib_data *calibration_parameters;
+	const struct regmap_config *regmap_config;
+};
+
+struct amlogic_thermal {
+	struct platform_device *pdev;
+	const struct amlogic_thermal_data *data;
+	struct regmap *regmap;
+	struct regmap *sec_ao_map;
+	struct clk *clk;
+	struct thermal_zone_device *tzd;
+	u32 trim_info;
+};
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree milliCelsius.
+ */
+static int amlogic_thermal_code_to_millicelsius(struct amlogic_thermal *pdata,
+						int temp_code)
+{
+	const struct amlogic_thermal_soc_calib_data *param =
+					pdata->data->calibration_parameters;
+	int temp;
+	s64 factor, Uptat, uefuse;
+
+	uefuse = pdata->trim_info & TSENSOR_TRIM_SIGN_MASK ?
+			     ~(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK) + 1 :
+			     (pdata->trim_info & TSENSOR_TRIM_TEMP_MASK);
+
+	factor = param->n * temp_code;
+	factor = div_s64(factor, 100);
+
+	Uptat = temp_code * param->m;
+	Uptat = div_s64(Uptat, 100);
+	Uptat = Uptat * BIT(16);
+	Uptat = div_s64(Uptat, BIT(16) + factor);
+
+	temp = (Uptat + uefuse) * param->A;
+	temp = div_s64(temp, BIT(16));
+	temp = (temp - param->B) * 100;
+
+	return temp;
+}
+
+static int amlogic_thermal_initialize(struct amlogic_thermal *pdata)
+{
+	int ret = 0;
+	int ver;
+
+	regmap_read(pdata->sec_ao_map, pdata->data->u_efuse_off,
+		    &pdata->trim_info);
+
+	ver = TSENSOR_TRIM_VERSION(pdata->trim_info);
+
+	if ((ver & TSENSOR_TRIM_CALIB_VALID_MASK) == 0) {
+		ret = -EINVAL;
+		dev_err(&pdata->pdev->dev,
+			"tsensor thermal calibration not supported: 0x%x!\n",
+			ver);
+	}
+
+	return ret;
+}
+
+static int amlogic_thermal_enable(struct amlogic_thermal *data)
+{
+	int ret;
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
+			   TSENSOR_CFG_REG1_ENABLE, TSENSOR_CFG_REG1_ENABLE);
+
+	return 0;
+}
+
+static int amlogic_thermal_disable(struct amlogic_thermal *data)
+{
+	regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
+			   TSENSOR_CFG_REG1_ENABLE, 0);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int amlogic_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	unsigned int tval;
+	struct amlogic_thermal *pdata = tz->devdata;
+
+	if (!pdata)
+		return -EINVAL;
+
+	regmap_read(pdata->regmap, TSENSOR_STAT0, &tval);
+	*temp =
+	   amlogic_thermal_code_to_millicelsius(pdata,
+						tval & TSENSOR_READ_TEMP_MASK);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops amlogic_thermal_ops = {
+	.get_temp	= amlogic_thermal_get_temp,
+};
+
+static const struct regmap_config amlogic_thermal_regmap_config_g12a = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = TSENSOR_STAT9,
+};
+
+static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = {
+	.A = 9411,
+	.B = 3159,
+	.m = 424,
+	.n = 324,
+};
+
+static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = {
+	.u_efuse_off = 0x128,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
+static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
+	.u_efuse_off = 0xf0,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
+static const struct of_device_id of_amlogic_thermal_match[] = {
+	{
+		.compatible = "amlogic,g12a-ddr-thermal",
+		.data = &amlogic_thermal_g12a_ddr_param,
+	},
+	{
+		.compatible = "amlogic,g12a-cpu-thermal",
+		.data = &amlogic_thermal_g12a_cpu_param,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
+
+static int amlogic_thermal_probe(struct platform_device *pdev)
+{
+	struct amlogic_thermal *pdata;
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	int ret;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->data = of_device_get_match_data(dev);
+	pdata->pdev = pdev;
+	platform_set_drvdata(pdev, pdata);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	pdata->regmap = devm_regmap_init_mmio(dev, base,
+					      pdata->data->regmap_config);
+	if (IS_ERR(pdata->regmap))
+		return PTR_ERR(pdata->regmap);
+
+	pdata->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pdata->clk)) {
+		if (PTR_ERR(pdata->clk) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(pdata->clk);
+	}
+
+	pdata->sec_ao_map = syscon_regmap_lookup_by_phandle
+		(pdev->dev.of_node, "amlogic,ao-secure");
+	if (IS_ERR(pdata->sec_ao_map)) {
+		dev_err(dev, "syscon regmap lookup failed.\n");
+		return PTR_ERR(pdata->sec_ao_map);
+	}
+
+	pdata->tzd = devm_thermal_of_zone_register(&pdev->dev,
+						   0,
+						   pdata,
+						   &amlogic_thermal_ops);
+	if (IS_ERR(pdata->tzd)) {
+		ret = PTR_ERR(pdata->tzd);
+		dev_err(dev, "Failed to register tsensor: %d\n", ret);
+		return ret;
+	}
+
+	if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+		dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
+
+	ret = amlogic_thermal_initialize(pdata);
+	if (ret)
+		return ret;
+
+	ret = amlogic_thermal_enable(pdata);
+
+	return ret;
+}
+
+static int amlogic_thermal_remove(struct platform_device *pdev)
+{
+	struct amlogic_thermal *data = platform_get_drvdata(pdev);
+
+	return amlogic_thermal_disable(data);
+}
+
+static int __maybe_unused amlogic_thermal_suspend(struct device *dev)
+{
+	struct amlogic_thermal *data = dev_get_drvdata(dev);
+
+	return amlogic_thermal_disable(data);
+}
+
+static int __maybe_unused amlogic_thermal_resume(struct device *dev)
+{
+	struct amlogic_thermal *data = dev_get_drvdata(dev);
+
+	return amlogic_thermal_enable(data);
+}
+
+static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
+			 amlogic_thermal_suspend, amlogic_thermal_resume);
+
+static struct platform_driver amlogic_thermal_driver = {
+	.driver = {
+		.name		= "amlogic_thermal",
+		.pm		= &amlogic_thermal_pm_ops,
+		.of_match_table = of_amlogic_thermal_match,
+	},
+	.probe	= amlogic_thermal_probe,
+	.remove	= amlogic_thermal_remove,
+};
+
+module_platform_driver(amlogic_thermal_driver);
+
+MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
new file mode 100644
index 000000000..52d63b399
--- /dev/null
+++ b/drivers/thermal/armada_thermal.c
@@ -0,0 +1,980 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell EBU Armada SoCs thermal sensor driver
+ *
+ * Copyright (C) 2013 Marvell
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+
+#include "thermal_core.h"
+
+/* Thermal Manager Control and Status Register */
+#define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
+#define PMU_TM_DISABLE_OFFS		0
+#define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS)
+#define PMU_TDC0_REF_CAL_CNT_OFFS	11
+#define PMU_TDC0_REF_CAL_CNT_MASK	(0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
+#define PMU_TDC0_OTF_CAL_MASK		(0x1 << 30)
+#define PMU_TDC0_START_CAL_MASK		(0x1 << 25)
+
+#define A375_UNIT_CONTROL_SHIFT		27
+#define A375_UNIT_CONTROL_MASK		0x7
+#define A375_READOUT_INVERT		BIT(15)
+#define A375_HW_RESETn			BIT(8)
+
+/* Errata fields */
+#define CONTROL0_TSEN_TC_TRIM_MASK	0x7
+#define CONTROL0_TSEN_TC_TRIM_VAL	0x3
+
+#define CONTROL0_TSEN_START		BIT(0)
+#define CONTROL0_TSEN_RESET		BIT(1)
+#define CONTROL0_TSEN_ENABLE		BIT(2)
+#define CONTROL0_TSEN_AVG_BYPASS	BIT(6)
+#define CONTROL0_TSEN_CHAN_SHIFT	13
+#define CONTROL0_TSEN_CHAN_MASK		0xF
+#define CONTROL0_TSEN_OSR_SHIFT		24
+#define CONTROL0_TSEN_OSR_MAX		0x3
+#define CONTROL0_TSEN_MODE_SHIFT	30
+#define CONTROL0_TSEN_MODE_EXTERNAL	0x2
+#define CONTROL0_TSEN_MODE_MASK		0x3
+
+#define CONTROL1_TSEN_AVG_MASK		0x7
+#define CONTROL1_EXT_TSEN_SW_RESET	BIT(7)
+#define CONTROL1_EXT_TSEN_HW_RESETn	BIT(8)
+#define CONTROL1_TSEN_INT_EN		BIT(25)
+#define CONTROL1_TSEN_SELECT_OFF	21
+#define CONTROL1_TSEN_SELECT_MASK	0x3
+
+#define STATUS_POLL_PERIOD_US		1000
+#define STATUS_POLL_TIMEOUT_US		100000
+#define OVERHEAT_INT_POLL_DELAY_MS	1000
+
+struct armada_thermal_data;
+
+/* Marvell EBU Thermal Sensor Dev Structure */
+struct armada_thermal_priv {
+	struct device *dev;
+	struct regmap *syscon;
+	char zone_name[THERMAL_NAME_LENGTH];
+	/* serialize temperature reads/updates */
+	struct mutex update_lock;
+	struct armada_thermal_data *data;
+	struct thermal_zone_device *overheat_sensor;
+	int interrupt_source;
+	int current_channel;
+	long current_threshold;
+	long current_hysteresis;
+};
+
+struct armada_thermal_data {
+	/* Initialize the thermal IC */
+	void (*init)(struct platform_device *pdev,
+		     struct armada_thermal_priv *priv);
+
+	/* Formula coeficients: temp = (b - m * reg) / div */
+	s64 coef_b;
+	s64 coef_m;
+	u32 coef_div;
+	bool inverted;
+	bool signed_sample;
+
+	/* Register shift and mask to access the sensor temperature */
+	unsigned int temp_shift;
+	unsigned int temp_mask;
+	unsigned int thresh_shift;
+	unsigned int hyst_shift;
+	unsigned int hyst_mask;
+	u32 is_valid_bit;
+
+	/* Syscon access */
+	unsigned int syscon_control0_off;
+	unsigned int syscon_control1_off;
+	unsigned int syscon_status_off;
+	unsigned int dfx_irq_cause_off;
+	unsigned int dfx_irq_mask_off;
+	unsigned int dfx_overheat_irq;
+	unsigned int dfx_server_irq_mask_off;
+	unsigned int dfx_server_irq_en;
+
+	/* One sensor is in the thermal IC, the others are in the CPUs if any */
+	unsigned int cpu_nr;
+};
+
+struct armada_drvdata {
+	enum drvtype {
+		LEGACY,
+		SYSCON
+	} type;
+	union {
+		struct armada_thermal_priv *priv;
+		struct thermal_zone_device *tz;
+	} data;
+};
+
+/*
+ * struct armada_thermal_sensor - hold the information of one thermal sensor
+ * @thermal: pointer to the local private structure
+ * @tzd: pointer to the thermal zone device
+ * @id: identifier of the thermal sensor
+ */
+struct armada_thermal_sensor {
+	struct armada_thermal_priv *priv;
+	int id;
+};
+
+static void armadaxp_init(struct platform_device *pdev,
+			  struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg |= PMU_TDC0_OTF_CAL_MASK;
+
+	/* Reference calibration value */
+	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+	reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+
+	/* Reset the sensor */
+	reg |= PMU_TDC0_SW_RST_MASK;
+
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
+	reg &= ~PMU_TDC0_SW_RST_MASK;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
+	/* Enable the sensor */
+	regmap_read(priv->syscon, data->syscon_status_off, &reg);
+	reg &= ~PMU_TM_DISABLE_MASK;
+	regmap_write(priv->syscon, data->syscon_status_off, reg);
+}
+
+static void armada370_init(struct platform_device *pdev,
+			   struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg |= PMU_TDC0_OTF_CAL_MASK;
+
+	/* Reference calibration value */
+	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+	reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+
+	/* Reset the sensor */
+	reg &= ~PMU_TDC0_START_CAL_MASK;
+
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
+	msleep(10);
+}
+
+static void armada375_init(struct platform_device *pdev,
+			   struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
+	reg &= ~A375_READOUT_INVERT;
+	reg &= ~A375_HW_RESETn;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
+	msleep(20);
+
+	reg |= A375_HW_RESETn;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
+	msleep(50);
+}
+
+static int armada_wait_sensor_validity(struct armada_thermal_priv *priv)
+{
+	u32 reg;
+
+	return regmap_read_poll_timeout(priv->syscon,
+					priv->data->syscon_status_off, reg,
+					reg & priv->data->is_valid_bit,
+					STATUS_POLL_PERIOD_US,
+					STATUS_POLL_TIMEOUT_US);
+}
+
+static void armada380_init(struct platform_device *pdev,
+			   struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	/* Disable the HW/SW reset */
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg |= CONTROL1_EXT_TSEN_HW_RESETn;
+	reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
+	/* Set Tsen Tc Trim to correct default value (errata #132698) */
+	regmap_read(priv->syscon, data->syscon_control0_off, &reg);
+	reg &= ~CONTROL0_TSEN_TC_TRIM_MASK;
+	reg |= CONTROL0_TSEN_TC_TRIM_VAL;
+	regmap_write(priv->syscon, data->syscon_control0_off, reg);
+}
+
+static void armada_ap806_init(struct platform_device *pdev,
+			      struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	regmap_read(priv->syscon, data->syscon_control0_off, &reg);
+	reg &= ~CONTROL0_TSEN_RESET;
+	reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE;
+
+	/* Sample every ~2ms */
+	reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
+
+	/* Enable average (2 samples by default) */
+	reg &= ~CONTROL0_TSEN_AVG_BYPASS;
+
+	regmap_write(priv->syscon, data->syscon_control0_off, reg);
+}
+
+static void armada_cp110_init(struct platform_device *pdev,
+			      struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	armada380_init(pdev, priv);
+
+	/* Sample every ~2ms */
+	regmap_read(priv->syscon, data->syscon_control0_off, &reg);
+	reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
+	regmap_write(priv->syscon, data->syscon_control0_off, reg);
+
+	/* Average the output value over 2^1 = 2 samples */
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg &= ~CONTROL1_TSEN_AVG_MASK;
+	reg |= 1;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+}
+
+static bool armada_is_valid(struct armada_thermal_priv *priv)
+{
+	u32 reg;
+
+	if (!priv->data->is_valid_bit)
+		return true;
+
+	regmap_read(priv->syscon, priv->data->syscon_status_off, &reg);
+
+	return reg & priv->data->is_valid_bit;
+}
+
+static void armada_enable_overheat_interrupt(struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	/* Clear DFX temperature IRQ cause */
+	regmap_read(priv->syscon, data->dfx_irq_cause_off, &reg);
+
+	/* Enable DFX Temperature IRQ */
+	regmap_read(priv->syscon, data->dfx_irq_mask_off, &reg);
+	reg |= data->dfx_overheat_irq;
+	regmap_write(priv->syscon, data->dfx_irq_mask_off, reg);
+
+	/* Enable DFX server IRQ */
+	regmap_read(priv->syscon, data->dfx_server_irq_mask_off, &reg);
+	reg |= data->dfx_server_irq_en;
+	regmap_write(priv->syscon, data->dfx_server_irq_mask_off, reg);
+
+	/* Enable overheat interrupt */
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg |= CONTROL1_TSEN_INT_EN;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+}
+
+static void __maybe_unused
+armada_disable_overheat_interrupt(struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg &= ~CONTROL1_TSEN_INT_EN;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+}
+
+/* There is currently no board with more than one sensor per channel */
+static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 ctrl0;
+
+	if (channel < 0 || channel > priv->data->cpu_nr)
+		return -EINVAL;
+
+	if (priv->current_channel == channel)
+		return 0;
+
+	/* Stop the measurements */
+	regmap_read(priv->syscon, data->syscon_control0_off, &ctrl0);
+	ctrl0 &= ~CONTROL0_TSEN_START;
+	regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+
+	/* Reset the mode, internal sensor will be automatically selected */
+	ctrl0 &= ~(CONTROL0_TSEN_MODE_MASK << CONTROL0_TSEN_MODE_SHIFT);
+
+	/* Other channels are external and should be selected accordingly */
+	if (channel) {
+		/* Change the mode to external */
+		ctrl0 |= CONTROL0_TSEN_MODE_EXTERNAL <<
+			 CONTROL0_TSEN_MODE_SHIFT;
+		/* Select the sensor */
+		ctrl0 &= ~(CONTROL0_TSEN_CHAN_MASK << CONTROL0_TSEN_CHAN_SHIFT);
+		ctrl0 |= (channel - 1) << CONTROL0_TSEN_CHAN_SHIFT;
+	}
+
+	/* Actually set the mode/channel */
+	regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+	priv->current_channel = channel;
+
+	/* Re-start the measurements */
+	ctrl0 |= CONTROL0_TSEN_START;
+	regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+
+	/*
+	 * The IP has a latency of ~15ms, so after updating the selected source,
+	 * we must absolutely wait for the sensor validity bit to ensure we read
+	 * actual data.
+	 */
+	if (armada_wait_sensor_validity(priv)) {
+		dev_err(priv->dev,
+			"Temperature sensor reading not valid\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int armada_read_sensor(struct armada_thermal_priv *priv, int *temp)
+{
+	u32 reg, div;
+	s64 sample, b, m;
+
+	regmap_read(priv->syscon, priv->data->syscon_status_off, &reg);
+	reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
+	if (priv->data->signed_sample)
+		/* The most significant bit is the sign bit */
+		sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1);
+	else
+		sample = reg;
+
+	/* Get formula coeficients */
+	b = priv->data->coef_b;
+	m = priv->data->coef_m;
+	div = priv->data->coef_div;
+
+	if (priv->data->inverted)
+		*temp = div_s64((m * sample) - b, div);
+	else
+		*temp = div_s64(b - (m * sample), div);
+
+	return 0;
+}
+
+static int armada_get_temp_legacy(struct thermal_zone_device *thermal,
+				  int *temp)
+{
+	struct armada_thermal_priv *priv = thermal->devdata;
+	int ret;
+
+	/* Valid check */
+	if (!armada_is_valid(priv)) {
+		dev_err(priv->dev,
+			"Temperature sensor reading not valid\n");
+		return -EIO;
+	}
+
+	/* Do the actual reading */
+	ret = armada_read_sensor(priv, temp);
+
+	return ret;
+}
+
+static struct thermal_zone_device_ops legacy_ops = {
+	.get_temp = armada_get_temp_legacy,
+};
+
+static int armada_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct armada_thermal_sensor *sensor = tz->devdata;
+	struct armada_thermal_priv *priv = sensor->priv;
+	int ret;
+
+	mutex_lock(&priv->update_lock);
+
+	/* Select the desired channel */
+	ret = armada_select_channel(priv, sensor->id);
+	if (ret)
+		goto unlock_mutex;
+
+	/* Do the actual reading */
+	ret = armada_read_sensor(priv, temp);
+	if (ret)
+		goto unlock_mutex;
+
+	/*
+	 * Select back the interrupt source channel from which a potential
+	 * critical trip point has been set.
+	 */
+	ret = armada_select_channel(priv, priv->interrupt_source);
+
+unlock_mutex:
+	mutex_unlock(&priv->update_lock);
+
+	return ret;
+}
+
+static const struct thermal_zone_device_ops of_ops = {
+	.get_temp = armada_get_temp,
+};
+
+static unsigned int armada_mc_to_reg_temp(struct armada_thermal_data *data,
+					  unsigned int temp_mc)
+{
+	s64 b = data->coef_b;
+	s64 m = data->coef_m;
+	s64 div = data->coef_div;
+	unsigned int sample;
+
+	if (data->inverted)
+		sample = div_s64(((temp_mc * div) + b), m);
+	else
+		sample = div_s64((b - (temp_mc * div)), m);
+
+	return sample & data->temp_mask;
+}
+
+/*
+ * The documentation states:
+ * high/low watermark = threshold +/- 0.4761 * 2^(hysteresis + 2)
+ * which is the mathematical derivation for:
+ * 0x0 <=> 1.9°C, 0x1 <=> 3.8°C, 0x2 <=> 7.6°C, 0x3 <=> 15.2°C
+ */
+static unsigned int hyst_levels_mc[] = {1900, 3800, 7600, 15200};
+
+static unsigned int armada_mc_to_reg_hyst(struct armada_thermal_data *data,
+					  unsigned int hyst_mc)
+{
+	int i;
+
+	/*
+	 * We will always take the smallest possible hysteresis to avoid risking
+	 * the hardware integrity by enlarging the threshold by +8°C in the
+	 * worst case.
+	 */
+	for (i = ARRAY_SIZE(hyst_levels_mc) - 1; i > 0; i--)
+		if (hyst_mc >= hyst_levels_mc[i])
+			break;
+
+	return i & data->hyst_mask;
+}
+
+static void armada_set_overheat_thresholds(struct armada_thermal_priv *priv,
+					   int thresh_mc, int hyst_mc)
+{
+	struct armada_thermal_data *data = priv->data;
+	unsigned int threshold = armada_mc_to_reg_temp(data, thresh_mc);
+	unsigned int hysteresis = armada_mc_to_reg_hyst(data, hyst_mc);
+	u32 ctrl1;
+
+	regmap_read(priv->syscon, data->syscon_control1_off, &ctrl1);
+
+	/* Set Threshold */
+	if (thresh_mc >= 0) {
+		ctrl1 &= ~(data->temp_mask << data->thresh_shift);
+		ctrl1 |= threshold << data->thresh_shift;
+		priv->current_threshold = thresh_mc;
+	}
+
+	/* Set Hysteresis */
+	if (hyst_mc >= 0) {
+		ctrl1 &= ~(data->hyst_mask << data->hyst_shift);
+		ctrl1 |= hysteresis << data->hyst_shift;
+		priv->current_hysteresis = hyst_mc;
+	}
+
+	regmap_write(priv->syscon, data->syscon_control1_off, ctrl1);
+}
+
+static irqreturn_t armada_overheat_isr(int irq, void *blob)
+{
+	/*
+	 * Disable the IRQ and continue in thread context (thermal core
+	 * notification and temperature monitoring).
+	 */
+	disable_irq_nosync(irq);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t armada_overheat_isr_thread(int irq, void *blob)
+{
+	struct armada_thermal_priv *priv = blob;
+	int low_threshold = priv->current_threshold - priv->current_hysteresis;
+	int temperature;
+	u32 dummy;
+	int ret;
+
+	/* Notify the core in thread context */
+	thermal_zone_device_update(priv->overheat_sensor,
+				   THERMAL_EVENT_UNSPECIFIED);
+
+	/*
+	 * The overheat interrupt must be cleared by reading the DFX interrupt
+	 * cause _after_ the temperature has fallen down to the low threshold.
+	 * Otherwise future interrupts might not be served.
+	 */
+	do {
+		msleep(OVERHEAT_INT_POLL_DELAY_MS);
+		mutex_lock(&priv->update_lock);
+		ret = armada_read_sensor(priv, &temperature);
+		mutex_unlock(&priv->update_lock);
+		if (ret)
+			goto enable_irq;
+	} while (temperature >= low_threshold);
+
+	regmap_read(priv->syscon, priv->data->dfx_irq_cause_off, &dummy);
+
+	/* Notify the thermal core that the temperature is acceptable again */
+	thermal_zone_device_update(priv->overheat_sensor,
+				   THERMAL_EVENT_UNSPECIFIED);
+
+enable_irq:
+	enable_irq(irq);
+
+	return IRQ_HANDLED;
+}
+
+static const struct armada_thermal_data armadaxp_data = {
+	.init = armadaxp_init,
+	.temp_shift = 10,
+	.temp_mask = 0x1ff,
+	.coef_b = 3153000000ULL,
+	.coef_m = 10000000ULL,
+	.coef_div = 13825,
+	.syscon_status_off = 0xb0,
+	.syscon_control1_off = 0x2d0,
+};
+
+static const struct armada_thermal_data armada370_data = {
+	.init = armada370_init,
+	.is_valid_bit = BIT(9),
+	.temp_shift = 10,
+	.temp_mask = 0x1ff,
+	.coef_b = 3153000000ULL,
+	.coef_m = 10000000ULL,
+	.coef_div = 13825,
+	.syscon_status_off = 0x0,
+	.syscon_control1_off = 0x4,
+};
+
+static const struct armada_thermal_data armada375_data = {
+	.init = armada375_init,
+	.is_valid_bit = BIT(10),
+	.temp_shift = 0,
+	.temp_mask = 0x1ff,
+	.coef_b = 3171900000ULL,
+	.coef_m = 10000000ULL,
+	.coef_div = 13616,
+	.syscon_status_off = 0x78,
+	.syscon_control0_off = 0x7c,
+	.syscon_control1_off = 0x80,
+};
+
+static const struct armada_thermal_data armada380_data = {
+	.init = armada380_init,
+	.is_valid_bit = BIT(10),
+	.temp_shift = 0,
+	.temp_mask = 0x3ff,
+	.coef_b = 1172499100ULL,
+	.coef_m = 2000096ULL,
+	.coef_div = 4201,
+	.inverted = true,
+	.syscon_control0_off = 0x70,
+	.syscon_control1_off = 0x74,
+	.syscon_status_off = 0x78,
+};
+
+static const struct armada_thermal_data armada_ap806_data = {
+	.init = armada_ap806_init,
+	.is_valid_bit = BIT(16),
+	.temp_shift = 0,
+	.temp_mask = 0x3ff,
+	.thresh_shift = 3,
+	.hyst_shift = 19,
+	.hyst_mask = 0x3,
+	.coef_b = -150000LL,
+	.coef_m = 423ULL,
+	.coef_div = 1,
+	.inverted = true,
+	.signed_sample = true,
+	.syscon_control0_off = 0x84,
+	.syscon_control1_off = 0x88,
+	.syscon_status_off = 0x8C,
+	.dfx_irq_cause_off = 0x108,
+	.dfx_irq_mask_off = 0x10C,
+	.dfx_overheat_irq = BIT(22),
+	.dfx_server_irq_mask_off = 0x104,
+	.dfx_server_irq_en = BIT(1),
+	.cpu_nr = 4,
+};
+
+static const struct armada_thermal_data armada_cp110_data = {
+	.init = armada_cp110_init,
+	.is_valid_bit = BIT(10),
+	.temp_shift = 0,
+	.temp_mask = 0x3ff,
+	.thresh_shift = 16,
+	.hyst_shift = 26,
+	.hyst_mask = 0x3,
+	.coef_b = 1172499100ULL,
+	.coef_m = 2000096ULL,
+	.coef_div = 4201,
+	.inverted = true,
+	.syscon_control0_off = 0x70,
+	.syscon_control1_off = 0x74,
+	.syscon_status_off = 0x78,
+	.dfx_irq_cause_off = 0x108,
+	.dfx_irq_mask_off = 0x10C,
+	.dfx_overheat_irq = BIT(20),
+	.dfx_server_irq_mask_off = 0x104,
+	.dfx_server_irq_en = BIT(1),
+};
+
+static const struct of_device_id armada_thermal_id_table[] = {
+	{
+		.compatible = "marvell,armadaxp-thermal",
+		.data       = &armadaxp_data,
+	},
+	{
+		.compatible = "marvell,armada370-thermal",
+		.data       = &armada370_data,
+	},
+	{
+		.compatible = "marvell,armada375-thermal",
+		.data       = &armada375_data,
+	},
+	{
+		.compatible = "marvell,armada380-thermal",
+		.data       = &armada380_data,
+	},
+	{
+		.compatible = "marvell,armada-ap806-thermal",
+		.data       = &armada_ap806_data,
+	},
+	{
+		.compatible = "marvell,armada-cp110-thermal",
+		.data       = &armada_cp110_data,
+	},
+	{
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
+
+static const struct regmap_config armada_thermal_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+};
+
+static int armada_thermal_probe_legacy(struct platform_device *pdev,
+				       struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	struct resource *res;
+	void __iomem *base;
+
+	/* First memory region points towards the status register */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/*
+	 * Fix up from the old individual DT register specification to
+	 * cover all the registers.  We do this by adjusting the ioremap()
+	 * result, which should be fine as ioremap() deals with pages.
+	 * However, validate that we do not cross a page boundary while
+	 * making this adjustment.
+	 */
+	if (((unsigned long)base & ~PAGE_MASK) < data->syscon_status_off)
+		return -EINVAL;
+	base -= data->syscon_status_off;
+
+	priv->syscon = devm_regmap_init_mmio(&pdev->dev, base,
+					     &armada_thermal_regmap_config);
+	return PTR_ERR_OR_ZERO(priv->syscon);
+}
+
+static int armada_thermal_probe_syscon(struct platform_device *pdev,
+				       struct armada_thermal_priv *priv)
+{
+	priv->syscon = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	return PTR_ERR_OR_ZERO(priv->syscon);
+}
+
+static void armada_set_sane_name(struct platform_device *pdev,
+				 struct armada_thermal_priv *priv)
+{
+	const char *name = dev_name(&pdev->dev);
+	char *insane_char;
+
+	if (strlen(name) > THERMAL_NAME_LENGTH) {
+		/*
+		 * When inside a system controller, the device name has the
+		 * form: f06f8000.system-controller:ap-thermal so stripping
+		 * after the ':' should give us a shorter but meaningful name.
+		 */
+		name = strrchr(name, ':');
+		if (!name)
+			name = "armada_thermal";
+		else
+			name++;
+	}
+
+	/* Save the name locally */
+	strncpy(priv->zone_name, name, THERMAL_NAME_LENGTH - 1);
+	priv->zone_name[THERMAL_NAME_LENGTH - 1] = '\0';
+
+	/* Then check there are no '-' or hwmon core will complain */
+	do {
+		insane_char = strpbrk(priv->zone_name, "-");
+		if (insane_char)
+			*insane_char = '_';
+	} while (insane_char);
+}
+
+/*
+ * The IP can manage to trigger interrupts on overheat situation from all the
+ * sensors. However, the interrupt source changes along with the last selected
+ * source (ie. the last read sensor), which is an inconsistent behavior. Avoid
+ * possible glitches by always selecting back only one channel (arbitrarily: the
+ * first in the DT which has a critical trip point). We also disable sensor
+ * switch during overheat situations.
+ */
+static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
+					 struct thermal_zone_device *tz,
+					 int sensor_id)
+{
+	/* Retrieve the critical trip point to enable the overheat interrupt */
+	const struct thermal_trip *trips = of_thermal_get_trip_points(tz);
+	int ret;
+	int i;
+
+	if (!trips)
+		return -EINVAL;
+
+	for (i = 0; i < of_thermal_get_ntrips(tz); i++)
+		if (trips[i].type == THERMAL_TRIP_CRITICAL)
+			break;
+
+	if (i == of_thermal_get_ntrips(tz))
+		return -EINVAL;
+
+	ret = armada_select_channel(priv, sensor_id);
+	if (ret)
+		return ret;
+
+	armada_set_overheat_thresholds(priv,
+				       trips[i].temperature,
+				       trips[i].hysteresis);
+	priv->overheat_sensor = tz;
+	priv->interrupt_source = sensor_id;
+
+	armada_enable_overheat_interrupt(priv);
+
+	return 0;
+}
+
+static int armada_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *tz;
+	struct armada_thermal_sensor *sensor;
+	struct armada_drvdata *drvdata;
+	const struct of_device_id *match;
+	struct armada_thermal_priv *priv;
+	int sensor_id, irq;
+	int ret;
+
+	match = of_match_device(armada_thermal_id_table, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->data = (struct armada_thermal_data *)match->data;
+
+	mutex_init(&priv->update_lock);
+
+	/*
+	 * Legacy DT bindings only described "control1" register (also referred
+	 * as "control MSB" on old documentation). Then, bindings moved to cover
+	 * "control0/control LSB" and "control1/control MSB" registers within
+	 * the same resource, which was then of size 8 instead of 4.
+	 *
+	 * The logic of defining sporadic registers is broken. For instance, it
+	 * blocked the addition of the overheat interrupt feature that needed
+	 * another resource somewhere else in the same memory area. One solution
+	 * is to define an overall system controller and put the thermal node
+	 * into it, which requires the use of regmaps across all the driver.
+	 */
+	if (IS_ERR(syscon_node_to_regmap(pdev->dev.parent->of_node))) {
+		/* Ensure device name is correct for the thermal core */
+		armada_set_sane_name(pdev, priv);
+
+		ret = armada_thermal_probe_legacy(pdev, priv);
+		if (ret)
+			return ret;
+
+		priv->data->init(pdev, priv);
+
+		/* Wait the sensors to be valid */
+		armada_wait_sensor_validity(priv);
+
+		tz = thermal_zone_device_register(priv->zone_name, 0, 0, priv,
+						  &legacy_ops, NULL, 0, 0);
+		if (IS_ERR(tz)) {
+			dev_err(&pdev->dev,
+				"Failed to register thermal zone device\n");
+			return PTR_ERR(tz);
+		}
+
+		ret = thermal_zone_device_enable(tz);
+		if (ret) {
+			thermal_zone_device_unregister(tz);
+			return ret;
+		}
+
+		drvdata->type = LEGACY;
+		drvdata->data.tz = tz;
+		platform_set_drvdata(pdev, drvdata);
+
+		return 0;
+	}
+
+	ret = armada_thermal_probe_syscon(pdev, priv);
+	if (ret)
+		return ret;
+
+	priv->current_channel = -1;
+	priv->data->init(pdev, priv);
+	drvdata->type = SYSCON;
+	drvdata->data.priv = priv;
+	platform_set_drvdata(pdev, drvdata);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq == -EPROBE_DEFER)
+		return irq;
+
+	/* The overheat interrupt feature is not mandatory */
+	if (irq > 0) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq,
+						armada_overheat_isr,
+						armada_overheat_isr_thread,
+						0, NULL, priv);
+		if (ret) {
+			dev_err(&pdev->dev, "Cannot request threaded IRQ %d\n",
+				irq);
+			return ret;
+		}
+	}
+
+	/*
+	 * There is one channel for the IC and one per CPU (if any), each
+	 * channel has one sensor.
+	 */
+	for (sensor_id = 0; sensor_id <= priv->data->cpu_nr; sensor_id++) {
+		sensor = devm_kzalloc(&pdev->dev,
+				      sizeof(struct armada_thermal_sensor),
+				      GFP_KERNEL);
+		if (!sensor)
+			return -ENOMEM;
+
+		/* Register the sensor */
+		sensor->priv = priv;
+		sensor->id = sensor_id;
+		tz = devm_thermal_of_zone_register(&pdev->dev,
+						   sensor->id, sensor,
+						   &of_ops);
+		if (IS_ERR(tz)) {
+			dev_info(&pdev->dev, "Thermal sensor %d unavailable\n",
+				 sensor_id);
+			devm_kfree(&pdev->dev, sensor);
+			continue;
+		}
+
+		/*
+		 * The first channel that has a critical trip point registered
+		 * in the DT will serve as interrupt source. Others possible
+		 * critical trip points will simply be ignored by the driver.
+		 */
+		if (irq > 0 && !priv->overheat_sensor)
+			armada_configure_overheat_int(priv, tz, sensor->id);
+	}
+
+	/* Just complain if no overheat interrupt was set up */
+	if (!priv->overheat_sensor)
+		dev_warn(&pdev->dev, "Overheat interrupt not available\n");
+
+	return 0;
+}
+
+static int armada_thermal_exit(struct platform_device *pdev)
+{
+	struct armada_drvdata *drvdata = platform_get_drvdata(pdev);
+
+	if (drvdata->type == LEGACY)
+		thermal_zone_device_unregister(drvdata->data.tz);
+
+	return 0;
+}
+
+static struct platform_driver armada_thermal_driver = {
+	.probe = armada_thermal_probe,
+	.remove = armada_thermal_exit,
+	.driver = {
+		.name = "armada_thermal",
+		.of_match_table = armada_thermal_id_table,
+	},
+};
+
+module_platform_driver(armada_thermal_driver);
+
+MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell EBU Armada SoCs thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
new file mode 100644
index 000000000..061f1db6e
--- /dev/null
+++ b/drivers/thermal/broadcom/Kconfig
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config BCM2711_THERMAL
+	tristate "Broadcom AVS RO thermal sensor driver"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on THERMAL_OF && MFD_SYSCON
+	help
+	  Support for thermal sensors on Broadcom BCM2711 SoCs.
+
+config BCM2835_THERMAL
+	tristate "Thermal sensors on bcm2835 SoC"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on THERMAL_OF
+	help
+	  Support for thermal sensors on Broadcom bcm2835 SoCs.
+
+config BRCMSTB_THERMAL
+	tristate "Broadcom STB AVS TMON thermal driver"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  Enable this driver if you have a Broadcom STB SoC and would like
+	  thermal framework support.
+
+config BCM_NS_THERMAL
+	tristate "Northstar thermal driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default y if ARCH_BCM_IPROC
+	help
+	  Support for the Northstar and Northstar Plus family of SoCs (e.g.
+	  BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+	  Management Unit) block with a thermal sensor that allows checking CPU
+	  temperature.
+
+config BCM_SR_THERMAL
+	tristate "Stingray thermal driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
+	help
+	  Support for the Stingray family of SoCs. Its different blocks like
+	  iHost, CRMU and NITRO has thermal sensor that allows checking its
+	  temperature.
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
new file mode 100644
index 000000000..c917b243d
--- /dev/null
+++ b/drivers/thermal/broadcom/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM2711_THERMAL)		+= bcm2711_thermal.o
+obj-$(CONFIG_BCM2835_THERMAL)		+= bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL)		+= brcmstb_thermal.o
+obj-$(CONFIG_BCM_NS_THERMAL)		+= ns-thermal.o
+obj-$(CONFIG_BCM_SR_THERMAL)		+= sr-thermal.o
diff --git a/drivers/thermal/broadcom/bcm2711_thermal.c b/drivers/thermal/broadcom/bcm2711_thermal.c
new file mode 100644
index 000000000..1f8651d15
--- /dev/null
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Broadcom AVS RO thermal sensor driver
+ *
+ * based on brcmstb_thermal
+ *
+ * Copyright (C) 2020 Stefan Wahren
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "../thermal_hwmon.h"
+
+#define AVS_RO_TEMP_STATUS		0x200
+#define AVS_RO_TEMP_STATUS_VALID_MSK	(BIT(16) | BIT(10))
+#define AVS_RO_TEMP_STATUS_DATA_MSK	GENMASK(9, 0)
+
+struct bcm2711_thermal_priv {
+	struct regmap *regmap;
+	struct thermal_zone_device *thermal;
+};
+
+static int bcm2711_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct bcm2711_thermal_priv *priv = tz->devdata;
+	int slope = thermal_zone_get_slope(tz);
+	int offset = thermal_zone_get_offset(tz);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, AVS_RO_TEMP_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & AVS_RO_TEMP_STATUS_VALID_MSK))
+		return -EIO;
+
+	val &= AVS_RO_TEMP_STATUS_DATA_MSK;
+
+	/* Convert a HW code to a temperature reading (millidegree celsius) */
+	*temp = slope * val + offset;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops bcm2711_thermal_of_ops = {
+	.get_temp	= bcm2711_get_temp,
+};
+
+static const struct of_device_id bcm2711_thermal_id_table[] = {
+	{ .compatible = "brcm,bcm2711-thermal" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2711_thermal_id_table);
+
+static int bcm2711_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal;
+	struct bcm2711_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct device_node *parent;
+	struct regmap *regmap;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* get regmap from syscon node */
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "failed to get regmap: %d\n", ret);
+		return ret;
+	}
+	priv->regmap = regmap;
+
+	thermal = devm_thermal_of_zone_register(dev, 0, priv,
+						&bcm2711_thermal_of_ops);
+	if (IS_ERR(thermal)) {
+		ret = PTR_ERR(thermal);
+		dev_err(dev, "could not register sensor: %d\n", ret);
+		return ret;
+	}
+
+	priv->thermal = thermal;
+
+	thermal->tzp->no_hwmon = false;
+	return thermal_add_hwmon_sysfs(thermal);
+}
+
+static struct platform_driver bcm2711_thermal_driver = {
+	.probe = bcm2711_thermal_probe,
+	.driver = {
+		.name = "bcm2711_thermal",
+		.of_match_table = bcm2711_thermal_id_table,
+	},
+};
+module_platform_driver(bcm2711_thermal_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefan Wahren");
+MODULE_DESCRIPTION("Broadcom AVS RO thermal sensor driver");
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
new file mode 100644
index 000000000..2c67841a1
--- /dev/null
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Broadcom BCM2835 SoC temperature sensor
+ *
+ * Copyright (C) 2016 Martin Sperl
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "../thermal_hwmon.h"
+
+#define BCM2835_TS_TSENSCTL			0x00
+#define BCM2835_TS_TSENSSTAT			0x04
+
+#define BCM2835_TS_TSENSCTL_PRWDW		BIT(0)
+#define BCM2835_TS_TSENSCTL_RSTB		BIT(1)
+
+/*
+ * bandgap reference voltage in 6 mV increments
+ * 000b = 1178 mV, 001b = 1184 mV, ... 111b = 1220 mV
+ */
+#define BCM2835_TS_TSENSCTL_CTRL_BITS		3
+#define BCM2835_TS_TSENSCTL_CTRL_SHIFT		2
+#define BCM2835_TS_TSENSCTL_CTRL_MASK		    \
+	GENMASK(BCM2835_TS_TSENSCTL_CTRL_BITS +     \
+		BCM2835_TS_TSENSCTL_CTRL_SHIFT - 1, \
+		BCM2835_TS_TSENSCTL_CTRL_SHIFT)
+#define BCM2835_TS_TSENSCTL_CTRL_DEFAULT	1
+#define BCM2835_TS_TSENSCTL_EN_INT		BIT(5)
+#define BCM2835_TS_TSENSCTL_DIRECT		BIT(6)
+#define BCM2835_TS_TSENSCTL_CLR_INT		BIT(7)
+#define BCM2835_TS_TSENSCTL_THOLD_SHIFT		8
+#define BCM2835_TS_TSENSCTL_THOLD_BITS		10
+#define BCM2835_TS_TSENSCTL_THOLD_MASK		     \
+	GENMASK(BCM2835_TS_TSENSCTL_THOLD_BITS +     \
+		BCM2835_TS_TSENSCTL_THOLD_SHIFT - 1, \
+		BCM2835_TS_TSENSCTL_THOLD_SHIFT)
+/*
+ * time how long the block to be asserted in reset
+ * which based on a clock counter (TSENS clock assumed)
+ */
+#define BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT	18
+#define BCM2835_TS_TSENSCTL_RSTDELAY_BITS	8
+#define BCM2835_TS_TSENSCTL_REGULEN		BIT(26)
+
+#define BCM2835_TS_TSENSSTAT_DATA_BITS		10
+#define BCM2835_TS_TSENSSTAT_DATA_SHIFT		0
+#define BCM2835_TS_TSENSSTAT_DATA_MASK		     \
+	GENMASK(BCM2835_TS_TSENSSTAT_DATA_BITS +     \
+		BCM2835_TS_TSENSSTAT_DATA_SHIFT - 1, \
+		BCM2835_TS_TSENSSTAT_DATA_SHIFT)
+#define BCM2835_TS_TSENSSTAT_VALID		BIT(10)
+#define BCM2835_TS_TSENSSTAT_INTERRUPT		BIT(11)
+
+struct bcm2835_thermal_data {
+	struct thermal_zone_device *tz;
+	void __iomem *regs;
+	struct clk *clk;
+	struct dentry *debugfsdir;
+};
+
+static int bcm2835_thermal_adc2temp(u32 adc, int offset, int slope)
+{
+	return offset + slope * adc;
+}
+
+static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
+{
+	temp -= offset;
+	temp /= slope;
+
+	if (temp < 0)
+		temp = 0;
+	if (temp >= BIT(BCM2835_TS_TSENSSTAT_DATA_BITS))
+		temp = BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1;
+
+	return temp;
+}
+
+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct bcm2835_thermal_data *data = tz->devdata;
+	u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT);
+
+	if (!(val & BCM2835_TS_TSENSSTAT_VALID))
+		return -EIO;
+
+	val &= BCM2835_TS_TSENSSTAT_DATA_MASK;
+
+	*temp = bcm2835_thermal_adc2temp(
+		val,
+		thermal_zone_get_offset(data->tz),
+		thermal_zone_get_slope(data->tz));
+
+	return 0;
+}
+
+static const struct debugfs_reg32 bcm2835_thermal_regs[] = {
+	{
+		.name = "ctl",
+		.offset = 0
+	},
+	{
+		.name = "stat",
+		.offset = 4
+	}
+};
+
+static void bcm2835_thermal_debugfs(struct platform_device *pdev)
+{
+	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
+	struct debugfs_regset32 *regset;
+
+	data->debugfsdir = debugfs_create_dir("bcm2835_thermal", NULL);
+
+	regset = devm_kzalloc(&pdev->dev, sizeof(*regset), GFP_KERNEL);
+	if (!regset)
+		return;
+
+	regset->regs = bcm2835_thermal_regs;
+	regset->nregs = ARRAY_SIZE(bcm2835_thermal_regs);
+	regset->base = data->regs;
+
+	debugfs_create_regset32("regset", 0444, data->debugfsdir, regset);
+}
+
+static const struct thermal_zone_device_ops bcm2835_thermal_ops = {
+	.get_temp = bcm2835_thermal_get_temp,
+};
+
+/*
+ * Note: as per Raspberry Foundation FAQ
+ * (https://www.raspberrypi.org/help/faqs/#performanceOperatingTemperature)
+ * the recommended temperature range for the SoC -40C to +85C
+ * so the trip limit is set to 80C.
+ * this applies to all the BCM283X SoC
+ */
+
+static const struct of_device_id bcm2835_thermal_of_match_table[] = {
+	{
+		.compatible = "brcm,bcm2835-thermal",
+	},
+	{
+		.compatible = "brcm,bcm2836-thermal",
+	},
+	{
+		.compatible = "brcm,bcm2837-thermal",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table);
+
+static int bcm2835_thermal_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct thermal_zone_device *tz;
+	struct bcm2835_thermal_data *data;
+	struct resource *res;
+	int err = 0;
+	u32 val;
+	unsigned long rate;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	match = of_match_device(bcm2835_thermal_of_match_table,
+				&pdev->dev);
+	if (!match)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->regs)) {
+		err = PTR_ERR(data->regs);
+		return err;
+	}
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk)) {
+		err = PTR_ERR(data->clk);
+		if (err != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get clk: %d\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(data->clk);
+	if (err)
+		return err;
+
+	rate = clk_get_rate(data->clk);
+	if ((rate < 1920000) || (rate > 5000000))
+		dev_warn(&pdev->dev,
+			 "Clock %pCn running at %lu Hz is outside of the recommended range: 1.92 to 5MHz\n",
+			 data->clk, rate);
+
+	/* register of thermal sensor and get info from DT */
+	tz = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+					   &bcm2835_thermal_ops);
+	if (IS_ERR(tz)) {
+		err = PTR_ERR(tz);
+		dev_err(&pdev->dev,
+			"Failed to register the thermal device: %d\n",
+			err);
+		goto err_clk;
+	}
+
+	/*
+	 * right now the FW does set up the HW-block, so we are not
+	 * touching the configuration registers.
+	 * But if the HW is not enabled, then set it up
+	 * using "sane" values used by the firmware right now.
+	 */
+	val = readl(data->regs + BCM2835_TS_TSENSCTL);
+	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
+		int trip_temp, offset, slope;
+
+		slope = thermal_zone_get_slope(tz);
+		offset = thermal_zone_get_offset(tz);
+		/*
+		 * For now we deal only with critical, otherwise
+		 * would need to iterate
+		 */
+		err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Not able to read trip_temp: %d\n",
+				err);
+			goto err_tz;
+		}
+
+		/* set bandgap reference voltage and enable voltage regulator */
+		val = (BCM2835_TS_TSENSCTL_CTRL_DEFAULT <<
+		       BCM2835_TS_TSENSCTL_CTRL_SHIFT) |
+		      BCM2835_TS_TSENSCTL_REGULEN;
+
+		/* use the recommended reset duration */
+		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
+
+		/*  trip_adc value from info */
+		val |= bcm2835_thermal_temp2adc(trip_temp,
+						offset,
+						slope)
+			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
+
+		/* write the value back to the register as 2 steps */
+		writel(val, data->regs + BCM2835_TS_TSENSCTL);
+		val |= BCM2835_TS_TSENSCTL_RSTB;
+		writel(val, data->regs + BCM2835_TS_TSENSCTL);
+	}
+
+	data->tz = tz;
+
+	platform_set_drvdata(pdev, data);
+
+	/*
+	 * Thermal_zone doesn't enable hwmon as default,
+	 * enable it here
+	 */
+	tz->tzp->no_hwmon = false;
+	err = thermal_add_hwmon_sysfs(tz);
+	if (err)
+		goto err_tz;
+
+	bcm2835_thermal_debugfs(pdev);
+
+	return 0;
+err_tz:
+	thermal_of_zone_unregister(tz);
+err_clk:
+	clk_disable_unprepare(data->clk);
+
+	return err;
+}
+
+static int bcm2835_thermal_remove(struct platform_device *pdev)
+{
+	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tz = data->tz;
+
+	debugfs_remove_recursive(data->debugfsdir);
+	thermal_of_zone_unregister(tz);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static struct platform_driver bcm2835_thermal_driver = {
+	.probe = bcm2835_thermal_probe,
+	.remove = bcm2835_thermal_remove,
+	.driver = {
+		.name = "bcm2835_thermal",
+		.of_match_table = bcm2835_thermal_of_match_table,
+	},
+};
+module_platform_driver(bcm2835_thermal_driver);
+
+MODULE_AUTHOR("Martin Sperl");
+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 000000000..c79c6cfdd
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ */
+
+#define DRV_NAME	"brcmstb_thermal"
+
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS			0x00
+ #define AVS_TMON_STATUS_valid_msk	BIT(11)
+ #define AVS_TMON_STATUS_data_msk	GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift	1
+
+#define AVS_TMON_EN_OVERTEMP_RESET	0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk	BIT(0)
+
+#define AVS_TMON_RESET_THRESH		0x08
+ #define AVS_TMON_RESET_THRESH_msk	GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift	1
+
+#define AVS_TMON_INT_IDLE_TIME		0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS	0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high	BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low	BIT(0)
+
+#define AVS_TMON_INT_THRESH		0x18
+ #define AVS_TMON_INT_THRESH_high_msk	GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift	17
+ #define AVS_TMON_INT_THRESH_low_msk	GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift	1
+
+#define AVS_TMON_TEMP_INT_CODE		0x1c
+#define AVS_TMON_TP_TEST_ENABLE		0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE		487
+#define AVS_TMON_TEMP_OFFSET		410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX		0x3ff
+#define AVS_TMON_TEMP_MIN		-88161
+#define AVS_TMON_TEMP_MASK		AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+	TMON_TRIP_TYPE_LOW = 0,
+	TMON_TRIP_TYPE_HIGH,
+	TMON_TRIP_TYPE_RESET,
+	TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+	/* HW bit to enable the trip */
+	u32 enable_offs;
+	u32 enable_mask;
+
+	/* HW field to read the trip temperature */
+	u32 reg_offs;
+	u32 reg_msk;
+	int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+	/* Trips when temperature is below threshold */
+	[TMON_TRIP_TYPE_LOW] = {
+		.enable_offs	= AVS_TMON_EN_TEMP_INT_SRCS,
+		.enable_mask	= AVS_TMON_EN_TEMP_INT_SRCS_low,
+		.reg_offs	= AVS_TMON_INT_THRESH,
+		.reg_msk	= AVS_TMON_INT_THRESH_low_msk,
+		.reg_shift	= AVS_TMON_INT_THRESH_low_shift,
+	},
+	/* Trips when temperature is above threshold */
+	[TMON_TRIP_TYPE_HIGH] = {
+		.enable_offs	= AVS_TMON_EN_TEMP_INT_SRCS,
+		.enable_mask	= AVS_TMON_EN_TEMP_INT_SRCS_high,
+		.reg_offs	= AVS_TMON_INT_THRESH,
+		.reg_msk	= AVS_TMON_INT_THRESH_high_msk,
+		.reg_shift	= AVS_TMON_INT_THRESH_high_shift,
+	},
+	/* Automatically resets chip when above threshold */
+	[TMON_TRIP_TYPE_RESET] = {
+		.enable_offs	= AVS_TMON_EN_OVERTEMP_RESET,
+		.enable_mask	= AVS_TMON_EN_OVERTEMP_RESET_msk,
+		.reg_offs	= AVS_TMON_RESET_THRESH,
+		.reg_msk	= AVS_TMON_RESET_THRESH_msk,
+		.reg_shift	= AVS_TMON_RESET_THRESH_shift,
+	},
+};
+
+struct brcmstb_thermal_params {
+	unsigned int offset;
+	unsigned int mult;
+	const struct thermal_zone_device_ops *of_ops;
+};
+
+struct brcmstb_thermal_priv {
+	void __iomem *tmon_base;
+	struct device *dev;
+	struct thermal_zone_device *thermal;
+	/* Process specific thermal parameters used for calculations */
+	const struct brcmstb_thermal_params *temp_params;
+};
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct brcmstb_thermal_priv *priv,
+					u32 code)
+{
+	int offset = priv->temp_params->offset;
+	int mult = priv->temp_params->mult;
+
+	return (offset - (int)((code & AVS_TMON_TEMP_MASK) * mult));
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
+					int temp, bool low)
+{
+	int offset = priv->temp_params->offset;
+	int mult = priv->temp_params->mult;
+
+	if (temp < AVS_TMON_TEMP_MIN)
+		return AVS_TMON_TEMP_MAX;	/* Maximum code value */
+
+	if (temp >= offset)
+		return 0;	/* Minimum code value */
+
+	if (low)
+		return (u32)(DIV_ROUND_UP(offset - temp, mult));
+	else
+		return (u32)((offset - temp) / mult);
+}
+
+static int brcmstb_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct brcmstb_thermal_priv *priv = tz->devdata;
+	u32 val;
+	long t;
+
+	val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+	if (!(val & AVS_TMON_STATUS_valid_msk)) {
+		dev_err(priv->dev, "reading not valid\n");
+		return -EIO;
+	}
+
+	val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+	t = avs_tmon_code_to_temp(priv, val);
+	if (t < 0)
+		*temp = 0;
+	else
+		*temp = t;
+
+	return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+				 enum avs_tmon_trip_type type, int en)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+	dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+	if (en)
+		val |= trip->enable_mask;
+	else
+		val &= ~trip->enable_mask;
+
+	__raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+				  enum avs_tmon_trip_type type)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+	val &= trip->reg_msk;
+	val >>= trip->reg_shift;
+
+	return avs_tmon_code_to_temp(priv, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+				   enum avs_tmon_trip_type type,
+				   int temp)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val, orig;
+
+	dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+	/* round toward low temp for the low interrupt */
+	val = avs_tmon_temp_to_code(priv, temp,
+				    type == TMON_TRIP_TYPE_LOW);
+
+	val <<= trip->reg_shift;
+	val &= trip->reg_msk;
+
+	orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+	orig &= ~trip->reg_msk;
+	orig |= val;
+	__raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+	u32 val;
+
+	val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+	return avs_tmon_code_to_temp(priv, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+	struct brcmstb_thermal_priv *priv = data;
+	int low, high, intr;
+
+	low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+	high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+	intr = avs_tmon_get_intr_temp(priv);
+
+	dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+			low, intr, high);
+
+	/* Disable high-temp until next threshold shift */
+	if (intr >= high)
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+	/* Disable low-temp until next threshold shift */
+	if (intr <= low)
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+	/*
+	 * Notify using the interrupt temperature, in case the temperature
+	 * changes before it can next be read out
+	 */
+	thermal_zone_device_update(priv->thermal, intr);
+
+	return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct brcmstb_thermal_priv *priv = tz->devdata;
+
+	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+	/*
+	 * Disable low-temp if "low" is too small. As per thermal framework
+	 * API, we use -INT_MAX rather than INT_MIN.
+	 */
+	if (low <= -INT_MAX) {
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+	} else {
+		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+	}
+
+	/* Disable high-temp if "high" is too big. */
+	if (high == INT_MAX) {
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+	} else {
+		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+	}
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops brcmstb_16nm_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+};
+
+static const struct brcmstb_thermal_params brcmstb_16nm_params = {
+	.offset	= 457829,
+	.mult	= 557,
+	.of_ops	= &brcmstb_16nm_of_ops,
+};
+
+static const struct thermal_zone_device_ops brcmstb_28nm_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+	.set_trips	= brcmstb_set_trips,
+};
+
+static const struct brcmstb_thermal_params brcmstb_28nm_params = {
+	.offset	= 410040,
+	.mult	= 487,
+	.of_ops	= &brcmstb_28nm_of_ops,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+	{ .compatible = "brcm,avs-tmon-bcm7216", .data = &brcmstb_16nm_params },
+	{ .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+	const struct thermal_zone_device_ops *of_ops;
+	struct thermal_zone_device *thermal;
+	struct brcmstb_thermal_priv *priv;
+	struct resource *res;
+	int irq, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->temp_params = of_device_get_match_data(&pdev->dev);
+	if (!priv->temp_params)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->tmon_base))
+		return PTR_ERR(priv->tmon_base);
+
+	priv->dev = &pdev->dev;
+	platform_set_drvdata(pdev, priv);
+	of_ops = priv->temp_params->of_ops;
+
+	thermal = devm_thermal_of_zone_register(&pdev->dev, 0, priv,
+						of_ops);
+	if (IS_ERR(thermal)) {
+		ret = PTR_ERR(thermal);
+		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+		return ret;
+	}
+
+	priv->thermal = thermal;
+
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq >= 0) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						brcmstb_tmon_irq_thread,
+						IRQF_ONESHOT,
+						DRV_NAME, priv);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
+			return ret;
+		}
+	}
+
+	dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+	return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+	.probe = brcmstb_thermal_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = brcmstb_thermal_id_table,
+	},
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c
new file mode 100644
index 000000000..07a8a3f49
--- /dev/null
+++ b/drivers/thermal/broadcom/ns-thermal.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define PVTMON_CONTROL0					0x00
+#define PVTMON_CONTROL0_SEL_MASK			0x0000000e
+#define PVTMON_CONTROL0_SEL_TEMP_MONITOR		0x00000000
+#define PVTMON_CONTROL0_SEL_TEST_MODE			0x0000000e
+#define PVTMON_STATUS					0x08
+
+static int ns_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	void __iomem *pvtmon = tz->devdata;
+	int offset = thermal_zone_get_offset(tz);
+	int slope = thermal_zone_get_slope(tz);
+	u32 val;
+
+	val = readl(pvtmon + PVTMON_CONTROL0);
+	if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) {
+		/* Clear current mode selection */
+		val &= ~PVTMON_CONTROL0_SEL_MASK;
+
+		/* Set temp monitor mode (it's the default actually) */
+		val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR;
+
+		writel(val, pvtmon + PVTMON_CONTROL0);
+	}
+
+	val = readl(pvtmon + PVTMON_STATUS);
+	*temp = slope * val + offset;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops ns_thermal_ops = {
+	.get_temp = ns_thermal_get_temp,
+};
+
+static int ns_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct thermal_zone_device *tz;
+	void __iomem *pvtmon;
+
+	pvtmon = of_iomap(dev_of_node(dev), 0);
+	if (WARN_ON(!pvtmon))
+		return -ENOENT;
+
+	tz = devm_thermal_of_zone_register(dev, 0,
+					   pvtmon,
+					   &ns_thermal_ops);
+	if (IS_ERR(tz)) {
+		iounmap(pvtmon);
+		return PTR_ERR(tz);
+	}
+
+	platform_set_drvdata(pdev, pvtmon);
+
+	return 0;
+}
+
+static int ns_thermal_remove(struct platform_device *pdev)
+{
+	void __iomem *pvtmon = platform_get_drvdata(pdev);
+
+	iounmap(pvtmon);
+
+	return 0;
+}
+
+static const struct of_device_id ns_thermal_of_match[] = {
+	{ .compatible = "brcm,ns-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ns_thermal_of_match);
+
+static struct platform_driver ns_thermal_driver = {
+	.probe		= ns_thermal_probe,
+	.remove		= ns_thermal_remove,
+	.driver = {
+		.name = "ns-thermal",
+		.of_match_table = ns_thermal_of_match,
+	},
+};
+module_platform_driver(ns_thermal_driver);
+
+MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>");
+MODULE_DESCRIPTION("Northstar thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
new file mode 100644
index 000000000..2b9350254
--- /dev/null
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Broadcom
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+/*
+ * In stingray thermal IO memory,
+ * Total Number of available TMONs MASK is at offset 0
+ * temperature registers BASE is at 4 byte offset.
+ * Each TMON temperature register size is 4.
+ */
+#define SR_TMON_TEMP_BASE(id)   ((id) * 0x4)
+
+#define SR_TMON_MAX_LIST        6
+
+struct sr_tmon {
+	unsigned int crit_temp;
+	unsigned int tmon_id;
+	struct sr_thermal *priv;
+};
+
+struct sr_thermal {
+	void __iomem *regs;
+	unsigned int max_crit_temp;
+	struct sr_tmon tmon[SR_TMON_MAX_LIST];
+};
+
+static int sr_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct sr_tmon *tmon = tz->devdata;
+	struct sr_thermal *sr_thermal = tmon->priv;
+
+	*temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops sr_tz_ops = {
+	.get_temp = sr_get_temp,
+};
+
+static int sr_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct thermal_zone_device *tz;
+	struct sr_thermal *sr_thermal;
+	struct sr_tmon *tmon;
+	struct resource *res;
+	u32 sr_tmon_list = 0;
+	unsigned int i;
+	int ret;
+
+	sr_thermal = devm_kzalloc(dev, sizeof(*sr_thermal), GFP_KERNEL);
+	if (!sr_thermal)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start,
+							 resource_size(res),
+							 MEMREMAP_WB);
+	if (IS_ERR(sr_thermal->regs)) {
+		dev_err(dev, "failed to get io address\n");
+		return PTR_ERR(sr_thermal->regs);
+	}
+
+	ret = device_property_read_u32(dev, "brcm,tmon-mask", &sr_tmon_list);
+	if (ret)
+		return ret;
+
+	tmon = sr_thermal->tmon;
+	for (i = 0; i < SR_TMON_MAX_LIST; i++, tmon++) {
+		if (!(sr_tmon_list & BIT(i)))
+			continue;
+
+		/* Flush temperature registers */
+		writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
+		tmon->tmon_id = i;
+		tmon->priv = sr_thermal;
+		tz = devm_thermal_of_zone_register(dev, i, tmon,
+						   &sr_tz_ops);
+		if (IS_ERR(tz))
+			return PTR_ERR(tz);
+
+		dev_dbg(dev, "thermal sensor %d registered\n", i);
+	}
+	platform_set_drvdata(pdev, sr_thermal);
+
+	return 0;
+}
+
+static const struct of_device_id sr_thermal_of_match[] = {
+	{ .compatible = "brcm,sr-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sr_thermal_of_match);
+
+static struct platform_driver sr_thermal_driver = {
+	.probe		= sr_thermal_probe,
+	.driver = {
+		.name = "sr-thermal",
+		.of_match_table = sr_thermal_of_match,
+	},
+};
+module_platform_driver(sr_thermal_driver);
+
+MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
+MODULE_DESCRIPTION("Stingray thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
new file mode 100644
index 000000000..9f8b438fc
--- /dev/null
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -0,0 +1,672 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/drivers/thermal/cpufreq_cooling.c
+ *
+ *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
+ *
+ *  Copyright (C) 2012-2018 Linaro Limited.
+ *
+ *  Authors:	Amit Daniel <amit.kachhap@linaro.org>
+ *		Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ */
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+#include <linux/device.h>
+#include <linux/energy_model.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_qos.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include <trace/events/thermal.h>
+
+/*
+ * Cooling state <-> CPUFreq frequency
+ *
+ * Cooling states are translated to frequencies throughout this driver and this
+ * is the relation between them.
+ *
+ * Highest cooling state corresponds to lowest possible frequency.
+ *
+ * i.e.
+ *	level 0 --> 1st Max Freq
+ *	level 1 --> 2nd Max Freq
+ *	...
+ */
+
+/**
+ * struct time_in_idle - Idle time stats
+ * @time: previous reading of the absolute time that this cpu was idle
+ * @timestamp: wall time of the last invocation of get_cpu_idle_time_us()
+ */
+struct time_in_idle {
+	u64 time;
+	u64 timestamp;
+};
+
+/**
+ * struct cpufreq_cooling_device - data for cooling device with cpufreq
+ * @last_load: load measured by the latest call to cpufreq_get_requested_power()
+ * @cpufreq_state: integer value representing the current state of cpufreq
+ *	cooling	devices.
+ * @max_level: maximum cooling level. One less than total number of valid
+ *	cpufreq frequencies.
+ * @em: Reference on the Energy Model of the device
+ * @cdev: thermal_cooling_device pointer to keep track of the
+ *	registered cooling device.
+ * @policy: cpufreq policy.
+ * @cooling_ops: cpufreq callbacks to thermal cooling device ops
+ * @idle_time: idle time stats
+ * @qos_req: PM QoS contraint to apply
+ *
+ * This structure is required for keeping information of each registered
+ * cpufreq_cooling_device.
+ */
+struct cpufreq_cooling_device {
+	u32 last_load;
+	unsigned int cpufreq_state;
+	unsigned int max_level;
+	struct em_perf_domain *em;
+	struct cpufreq_policy *policy;
+	struct thermal_cooling_device_ops cooling_ops;
+#ifndef CONFIG_SMP
+	struct time_in_idle *idle_time;
+#endif
+	struct freq_qos_request qos_req;
+};
+
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
+/**
+ * get_level: Find the level for a particular frequency
+ * @cpufreq_cdev: cpufreq_cdev for which the property is required
+ * @freq: Frequency
+ *
+ * Return: level corresponding to the frequency.
+ */
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
+			       unsigned int freq)
+{
+	int i;
+
+	for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) {
+		if (freq > cpufreq_cdev->em->table[i].frequency)
+			break;
+	}
+
+	return cpufreq_cdev->max_level - i - 1;
+}
+
+static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_cdev,
+			     u32 freq)
+{
+	unsigned long power_mw;
+	int i;
+
+	for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) {
+		if (freq > cpufreq_cdev->em->table[i].frequency)
+			break;
+	}
+
+	power_mw = cpufreq_cdev->em->table[i + 1].power;
+	power_mw /= MICROWATT_PER_MILLIWATT;
+
+	return power_mw;
+}
+
+static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev,
+			     u32 power)
+{
+	unsigned long em_power_mw;
+	int i;
+
+	for (i = cpufreq_cdev->max_level; i > 0; i--) {
+		/* Convert EM power to milli-Watts to make safe comparison */
+		em_power_mw = cpufreq_cdev->em->table[i].power;
+		em_power_mw /= MICROWATT_PER_MILLIWATT;
+		if (power >= em_power_mw)
+			break;
+	}
+
+	return cpufreq_cdev->em->table[i].frequency;
+}
+
+/**
+ * get_load() - get load for a cpu
+ * @cpufreq_cdev: struct cpufreq_cooling_device for the cpu
+ * @cpu: cpu number
+ * @cpu_idx: index of the cpu in time_in_idle array
+ *
+ * Return: The average load of cpu @cpu in percentage since this
+ * function was last called.
+ */
+#ifdef CONFIG_SMP
+static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu,
+		    int cpu_idx)
+{
+	unsigned long util = sched_cpu_util(cpu);
+
+	return (util * 100) / arch_scale_cpu_capacity(cpu);
+}
+#else /* !CONFIG_SMP */
+static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu,
+		    int cpu_idx)
+{
+	u32 load;
+	u64 now, now_idle, delta_time, delta_idle;
+	struct time_in_idle *idle_time = &cpufreq_cdev->idle_time[cpu_idx];
+
+	now_idle = get_cpu_idle_time(cpu, &now, 0);
+	delta_idle = now_idle - idle_time->time;
+	delta_time = now - idle_time->timestamp;
+
+	if (delta_time <= delta_idle)
+		load = 0;
+	else
+		load = div64_u64(100 * (delta_time - delta_idle), delta_time);
+
+	idle_time->time = now_idle;
+	idle_time->timestamp = now;
+
+	return load;
+}
+#endif /* CONFIG_SMP */
+
+/**
+ * get_dynamic_power() - calculate the dynamic power
+ * @cpufreq_cdev:	&cpufreq_cooling_device for this cdev
+ * @freq:	current frequency
+ *
+ * Return: the dynamic power consumed by the cpus described by
+ * @cpufreq_cdev.
+ */
+static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev,
+			     unsigned long freq)
+{
+	u32 raw_cpu_power;
+
+	raw_cpu_power = cpu_freq_to_power(cpufreq_cdev, freq);
+	return (raw_cpu_power * cpufreq_cdev->last_load) / 100;
+}
+
+/**
+ * cpufreq_get_requested_power() - get the current power
+ * @cdev:	&thermal_cooling_device pointer
+ * @power:	pointer in which to store the resulting power
+ *
+ * Calculate the current power consumption of the cpus in milliwatts
+ * and store it in @power.  This function should actually calculate
+ * the requested power, but it's hard to get the frequency that
+ * cpufreq would have assigned if there were no thermal limits.
+ * Instead, we calculate the current power on the assumption that the
+ * immediate future will look like the immediate past.
+ *
+ * We use the current frequency and the average load since this
+ * function was last called.  In reality, there could have been
+ * multiple opps since this function was last called and that affects
+ * the load calculation.  While it's not perfectly accurate, this
+ * simplification is good enough and works.  REVISIT this, as more
+ * complex code may be needed if experiments show that it's not
+ * accurate enough.
+ *
+ * Return: 0 on success, this function doesn't fail.
+ */
+static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
+				       u32 *power)
+{
+	unsigned long freq;
+	int i = 0, cpu;
+	u32 total_load = 0;
+	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+	struct cpufreq_policy *policy = cpufreq_cdev->policy;
+
+	freq = cpufreq_quick_get(policy->cpu);
+
+	for_each_cpu(cpu, policy->related_cpus) {
+		u32 load;
+
+		if (cpu_online(cpu))
+			load = get_load(cpufreq_cdev, cpu, i);
+		else
+			load = 0;
+
+		total_load += load;
+	}
+
+	cpufreq_cdev->last_load = total_load;
+
+	*power = get_dynamic_power(cpufreq_cdev, freq);
+
+	trace_thermal_power_cpu_get_power_simple(policy->cpu, *power);
+
+	return 0;
+}
+
+/**
+ * cpufreq_state2power() - convert a cpu cdev state to power consumed
+ * @cdev:	&thermal_cooling_device pointer
+ * @state:	cooling device state to be converted
+ * @power:	pointer in which to store the resulting power
+ *
+ * Convert cooling device state @state into power consumption in
+ * milliwatts assuming 100% load.  Store the calculated power in
+ * @power.
+ *
+ * Return: 0 on success, -EINVAL if the cooling device state is bigger
+ * than maximum allowed.
+ */
+static int cpufreq_state2power(struct thermal_cooling_device *cdev,
+			       unsigned long state, u32 *power)
+{
+	unsigned int freq, num_cpus, idx;
+	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+	/* Request state should be less than max_level */
+	if (state > cpufreq_cdev->max_level)
+		return -EINVAL;
+
+	num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus);
+
+	idx = cpufreq_cdev->max_level - state;
+	freq = cpufreq_cdev->em->table[idx].frequency;
+	*power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus;
+
+	return 0;
+}
+
+/**
+ * cpufreq_power2state() - convert power to a cooling device state
+ * @cdev:	&thermal_cooling_device pointer
+ * @power:	power in milliwatts to be converted
+ * @state:	pointer in which to store the resulting state
+ *
+ * Calculate a cooling device state for the cpus described by @cdev
+ * that would allow them to consume at most @power mW and store it in
+ * @state.  Note that this calculation depends on external factors
+ * such as the CPUs load.  Calling this function with the same power
+ * as input can yield different cooling device states depending on those
+ * external factors.
+ *
+ * Return: 0 on success, this function doesn't fail.
+ */
+static int cpufreq_power2state(struct thermal_cooling_device *cdev,
+			       u32 power, unsigned long *state)
+{
+	unsigned int target_freq;
+	u32 last_load, normalised_power;
+	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+	struct cpufreq_policy *policy = cpufreq_cdev->policy;
+
+	last_load = cpufreq_cdev->last_load ?: 1;
+	normalised_power = (power * 100) / last_load;
+	target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power);
+
+	*state = get_level(cpufreq_cdev, target_freq);
+	trace_thermal_power_cpu_limit(policy->related_cpus, target_freq, *state,
+				      power);
+	return 0;
+}
+
+static inline bool em_is_sane(struct cpufreq_cooling_device *cpufreq_cdev,
+			      struct em_perf_domain *em) {
+	struct cpufreq_policy *policy;
+	unsigned int nr_levels;
+
+	if (!em || em_is_artificial(em))
+		return false;
+
+	policy = cpufreq_cdev->policy;
+	if (!cpumask_equal(policy->related_cpus, em_span_cpus(em))) {
+		pr_err("The span of pd %*pbl is misaligned with cpufreq policy %*pbl\n",
+			cpumask_pr_args(em_span_cpus(em)),
+			cpumask_pr_args(policy->related_cpus));
+		return false;
+	}
+
+	nr_levels = cpufreq_cdev->max_level + 1;
+	if (em_pd_nr_perf_states(em) != nr_levels) {
+		pr_err("The number of performance states in pd %*pbl (%u) doesn't match the number of cooling levels (%u)\n",
+			cpumask_pr_args(em_span_cpus(em)),
+			em_pd_nr_perf_states(em), nr_levels);
+		return false;
+	}
+
+	return true;
+}
+#endif /* CONFIG_THERMAL_GOV_POWER_ALLOCATOR */
+
+#ifdef CONFIG_SMP
+static inline int allocate_idle_time(struct cpufreq_cooling_device *cpufreq_cdev)
+{
+	return 0;
+}
+
+static inline void free_idle_time(struct cpufreq_cooling_device *cpufreq_cdev)
+{
+}
+#else
+static int allocate_idle_time(struct cpufreq_cooling_device *cpufreq_cdev)
+{
+	unsigned int num_cpus = cpumask_weight(cpufreq_cdev->policy->related_cpus);
+
+	cpufreq_cdev->idle_time = kcalloc(num_cpus,
+					  sizeof(*cpufreq_cdev->idle_time),
+					  GFP_KERNEL);
+	if (!cpufreq_cdev->idle_time)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void free_idle_time(struct cpufreq_cooling_device *cpufreq_cdev)
+{
+	kfree(cpufreq_cdev->idle_time);
+	cpufreq_cdev->idle_time = NULL;
+}
+#endif /* CONFIG_SMP */
+
+static unsigned int get_state_freq(struct cpufreq_cooling_device *cpufreq_cdev,
+				   unsigned long state)
+{
+	struct cpufreq_policy *policy;
+	unsigned long idx;
+
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
+	/* Use the Energy Model table if available */
+	if (cpufreq_cdev->em) {
+		idx = cpufreq_cdev->max_level - state;
+		return cpufreq_cdev->em->table[idx].frequency;
+	}
+#endif
+
+	/* Otherwise, fallback on the CPUFreq table */
+	policy = cpufreq_cdev->policy;
+	if (policy->freq_table_sorted == CPUFREQ_TABLE_SORTED_ASCENDING)
+		idx = cpufreq_cdev->max_level - state;
+	else
+		idx = state;
+
+	return policy->freq_table[idx].frequency;
+}
+
+/* cpufreq cooling device callback functions are defined below */
+
+/**
+ * cpufreq_get_max_state - callback function to get the max cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the max cooling state.
+ *
+ * Callback for the thermal cooling device to return the cpufreq
+ * max cooling state.
+ *
+ * Return: 0 on success, this function doesn't fail.
+ */
+static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+	*state = cpufreq_cdev->max_level;
+	return 0;
+}
+
+/**
+ * cpufreq_get_cur_state - callback function to get the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the current cooling state.
+ *
+ * Callback for the thermal cooling device to return the cpufreq
+ * current cooling state.
+ *
+ * Return: 0 on success, this function doesn't fail.
+ */
+static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+	*state = cpufreq_cdev->cpufreq_state;
+
+	return 0;
+}
+
+/**
+ * cpufreq_set_cur_state - callback function to set the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: set this variable to the current cooling state.
+ *
+ * Callback for the thermal cooling device to change the cpufreq
+ * current cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long state)
+{
+	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+	struct cpumask *cpus;
+	unsigned int frequency;
+	int ret;
+
+	/* Request state should be less than max_level */
+	if (state > cpufreq_cdev->max_level)
+		return -EINVAL;
+
+	/* Check if the old cooling action is same as new cooling action */
+	if (cpufreq_cdev->cpufreq_state == state)
+		return 0;
+
+	frequency = get_state_freq(cpufreq_cdev, state);
+
+	ret = freq_qos_update_request(&cpufreq_cdev->qos_req, frequency);
+	if (ret >= 0) {
+		cpufreq_cdev->cpufreq_state = state;
+		cpus = cpufreq_cdev->policy->related_cpus;
+		arch_update_thermal_pressure(cpus, frequency);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/**
+ * __cpufreq_cooling_register - helper function to create cpufreq cooling device
+ * @np: a valid struct device_node to the cooling device tree node
+ * @policy: cpufreq policy
+ * Normally this should be same as cpufreq policy->related_cpus.
+ * @em: Energy Model of the cpufreq policy
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "cpufreq-%s". This API can support multiple instances of cpufreq
+ * cooling devices. It also gives the opportunity to link the cooling device
+ * with a device tree node, in order to bind it via the thermal DT code.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+static struct thermal_cooling_device *
+__cpufreq_cooling_register(struct device_node *np,
+			struct cpufreq_policy *policy,
+			struct em_perf_domain *em)
+{
+	struct thermal_cooling_device *cdev;
+	struct cpufreq_cooling_device *cpufreq_cdev;
+	unsigned int i;
+	struct device *dev;
+	int ret;
+	struct thermal_cooling_device_ops *cooling_ops;
+	char *name;
+
+	if (IS_ERR_OR_NULL(policy)) {
+		pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy);
+		return ERR_PTR(-EINVAL);
+	}
+
+	dev = get_cpu_device(policy->cpu);
+	if (unlikely(!dev)) {
+		pr_warn("No cpu device for cpu %d\n", policy->cpu);
+		return ERR_PTR(-ENODEV);
+	}
+
+	i = cpufreq_table_count_valid_entries(policy);
+	if (!i) {
+		pr_debug("%s: CPUFreq table not found or has no valid entries\n",
+			 __func__);
+		return ERR_PTR(-ENODEV);
+	}
+
+	cpufreq_cdev = kzalloc(sizeof(*cpufreq_cdev), GFP_KERNEL);
+	if (!cpufreq_cdev)
+		return ERR_PTR(-ENOMEM);
+
+	cpufreq_cdev->policy = policy;
+
+	ret = allocate_idle_time(cpufreq_cdev);
+	if (ret) {
+		cdev = ERR_PTR(ret);
+		goto free_cdev;
+	}
+
+	/* max_level is an index, not a counter */
+	cpufreq_cdev->max_level = i - 1;
+
+	cooling_ops = &cpufreq_cdev->cooling_ops;
+	cooling_ops->get_max_state = cpufreq_get_max_state;
+	cooling_ops->get_cur_state = cpufreq_get_cur_state;
+	cooling_ops->set_cur_state = cpufreq_set_cur_state;
+
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
+	if (em_is_sane(cpufreq_cdev, em)) {
+		cpufreq_cdev->em = em;
+		cooling_ops->get_requested_power = cpufreq_get_requested_power;
+		cooling_ops->state2power = cpufreq_state2power;
+		cooling_ops->power2state = cpufreq_power2state;
+	} else
+#endif
+	if (policy->freq_table_sorted == CPUFREQ_TABLE_UNSORTED) {
+		pr_err("%s: unsorted frequency tables are not supported\n",
+		       __func__);
+		cdev = ERR_PTR(-EINVAL);
+		goto free_idle_time;
+	}
+
+	ret = freq_qos_add_request(&policy->constraints,
+				   &cpufreq_cdev->qos_req, FREQ_QOS_MAX,
+				   get_state_freq(cpufreq_cdev, 0));
+	if (ret < 0) {
+		pr_err("%s: Failed to add freq constraint (%d)\n", __func__,
+		       ret);
+		cdev = ERR_PTR(ret);
+		goto free_idle_time;
+	}
+
+	cdev = ERR_PTR(-ENOMEM);
+	name = kasprintf(GFP_KERNEL, "cpufreq-%s", dev_name(dev));
+	if (!name)
+		goto remove_qos_req;
+
+	cdev = thermal_of_cooling_device_register(np, name, cpufreq_cdev,
+						  cooling_ops);
+	kfree(name);
+
+	if (IS_ERR(cdev))
+		goto remove_qos_req;
+
+	return cdev;
+
+remove_qos_req:
+	freq_qos_remove_request(&cpufreq_cdev->qos_req);
+free_idle_time:
+	free_idle_time(cpufreq_cdev);
+free_cdev:
+	kfree(cpufreq_cdev);
+	return cdev;
+}
+
+/**
+ * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @policy: cpufreq policy
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "cpufreq-%s". This API can support multiple instances of cpufreq cooling
+ * devices.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+cpufreq_cooling_register(struct cpufreq_policy *policy)
+{
+	return __cpufreq_cooling_register(NULL, policy, NULL);
+}
+EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
+
+/**
+ * of_cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @policy: cpufreq policy
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "cpufreq-%s". This API can support multiple instances of cpufreq cooling
+ * devices. Using this API, the cpufreq cooling device will be linked to the
+ * device tree node provided.
+ *
+ * Using this function, the cooling device will implement the power
+ * extensions by using the Energy Model (if present).  The cpus must have
+ * registered their OPPs using the OPP library.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * and NULL on failure.
+ */
+struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct cpufreq_policy *policy)
+{
+	struct device_node *np = of_get_cpu_node(policy->cpu, NULL);
+	struct thermal_cooling_device *cdev = NULL;
+
+	if (!np) {
+		pr_err("cpufreq_cooling: OF node not available for cpu%d\n",
+		       policy->cpu);
+		return NULL;
+	}
+
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		struct em_perf_domain *em = em_cpu_get(policy->cpu);
+
+		cdev = __cpufreq_cooling_register(np, policy, em);
+		if (IS_ERR(cdev)) {
+			pr_err("cpufreq_cooling: cpu%d failed to register as cooling device: %ld\n",
+			       policy->cpu, PTR_ERR(cdev));
+			cdev = NULL;
+		}
+	}
+
+	of_node_put(np);
+	return cdev;
+}
+EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
+
+/**
+ * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
+ * @cdev: thermal cooling device pointer.
+ *
+ * This interface function unregisters the "cpufreq-%x" cooling device.
+ */
+void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+{
+	struct cpufreq_cooling_device *cpufreq_cdev;
+
+	if (!cdev)
+		return;
+
+	cpufreq_cdev = cdev->devdata;
+
+	thermal_cooling_device_unregister(cdev);
+	freq_qos_remove_request(&cpufreq_cdev->qos_req);
+	free_idle_time(cpufreq_cdev);
+	kfree(cpufreq_cdev);
+}
+EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);
diff --git a/drivers/thermal/cpuidle_cooling.c b/drivers/thermal/cpuidle_cooling.c
new file mode 100644
index 000000000..4f41102e8
--- /dev/null
+++ b/drivers/thermal/cpuidle_cooling.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2019 Linaro Limited.
+ *
+ *  Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ */
+#define pr_fmt(fmt) "cpuidle cooling: " fmt
+
+#include <linux/cpu_cooling.h>
+#include <linux/cpuidle.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/idle_inject.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+/**
+ * struct cpuidle_cooling_device - data for the idle cooling device
+ * @ii_dev: an atomic to keep track of the last task exiting the idle cycle
+ * @state: a normalized integer giving the state of the cooling device
+ */
+struct cpuidle_cooling_device {
+	struct idle_inject_device *ii_dev;
+	unsigned long state;
+};
+
+/**
+ * cpuidle_cooling_runtime - Running time computation
+ * @idle_duration_us: CPU idle time to inject in microseconds
+ * @state: a percentile based number
+ *
+ * The running duration is computed from the idle injection duration
+ * which is fixed. If we reach 100% of idle injection ratio, that
+ * means the running duration is zero. If we have a 50% ratio
+ * injection, that means we have equal duration for idle and for
+ * running duration.
+ *
+ * The formula is deduced as follows:
+ *
+ *  running = idle x ((100 / ratio) - 1)
+ *
+ * For precision purpose for integer math, we use the following:
+ *
+ *  running = (idle x 100) / ratio - idle
+ *
+ * For example, if we have an injected duration of 50%, then we end up
+ * with 10ms of idle injection and 10ms of running duration.
+ *
+ * Return: An unsigned int for a usec based runtime duration.
+ */
+static unsigned int cpuidle_cooling_runtime(unsigned int idle_duration_us,
+					    unsigned long state)
+{
+	if (!state)
+		return 0;
+
+	return ((idle_duration_us * 100) / state) - idle_duration_us;
+}
+
+/**
+ * cpuidle_cooling_get_max_state - Get the maximum state
+ * @cdev  : the thermal cooling device
+ * @state : a pointer to the state variable to be filled
+ *
+ * The function always returns 100 as the injection ratio. It is
+ * percentile based for consistency accross different platforms.
+ *
+ * Return: The function can not fail, it is always zero
+ */
+static int cpuidle_cooling_get_max_state(struct thermal_cooling_device *cdev,
+					 unsigned long *state)
+{
+	/*
+	 * Depending on the configuration or the hardware, the running
+	 * cycle and the idle cycle could be different. We want to
+	 * unify that to an 0..100 interval, so the set state
+	 * interface will be the same whatever the platform is.
+	 *
+	 * The state 100% will make the cluster 100% ... idle. A 0%
+	 * injection ratio means no idle injection at all and 50%
+	 * means for 10ms of idle injection, we have 10ms of running
+	 * time.
+	 */
+	*state = 100;
+
+	return 0;
+}
+
+/**
+ * cpuidle_cooling_get_cur_state - Get the current cooling state
+ * @cdev: the thermal cooling device
+ * @state: a pointer to the state
+ *
+ * The function just copies  the state value from the private thermal
+ * cooling device structure, the mapping is 1 <-> 1.
+ *
+ * Return: The function can not fail, it is always zero
+ */
+static int cpuidle_cooling_get_cur_state(struct thermal_cooling_device *cdev,
+					 unsigned long *state)
+{
+	struct cpuidle_cooling_device *idle_cdev = cdev->devdata;
+
+	*state = idle_cdev->state;
+
+	return 0;
+}
+
+/**
+ * cpuidle_cooling_set_cur_state - Set the current cooling state
+ * @cdev: the thermal cooling device
+ * @state: the target state
+ *
+ * The function checks first if we are initiating the mitigation which
+ * in turn wakes up all the idle injection tasks belonging to the idle
+ * cooling device. In any case, it updates the internal state for the
+ * cooling device.
+ *
+ * Return: The function can not fail, it is always zero
+ */
+static int cpuidle_cooling_set_cur_state(struct thermal_cooling_device *cdev,
+					 unsigned long state)
+{
+	struct cpuidle_cooling_device *idle_cdev = cdev->devdata;
+	struct idle_inject_device *ii_dev = idle_cdev->ii_dev;
+	unsigned long current_state = idle_cdev->state;
+	unsigned int runtime_us, idle_duration_us;
+
+	idle_cdev->state = state;
+
+	idle_inject_get_duration(ii_dev, &runtime_us, &idle_duration_us);
+
+	runtime_us = cpuidle_cooling_runtime(idle_duration_us, state);
+
+	idle_inject_set_duration(ii_dev, runtime_us, idle_duration_us);
+
+	if (current_state == 0 && state > 0) {
+		idle_inject_start(ii_dev);
+	} else if (current_state > 0 && !state)  {
+		idle_inject_stop(ii_dev);
+	}
+
+	return 0;
+}
+
+/**
+ * cpuidle_cooling_ops - thermal cooling device ops
+ */
+static struct thermal_cooling_device_ops cpuidle_cooling_ops = {
+	.get_max_state = cpuidle_cooling_get_max_state,
+	.get_cur_state = cpuidle_cooling_get_cur_state,
+	.set_cur_state = cpuidle_cooling_set_cur_state,
+};
+
+/**
+ * __cpuidle_cooling_register: register the cooling device
+ * @drv: a cpuidle driver structure pointer
+ * @np: a device node structure pointer used for the thermal binding
+ *
+ * This function is in charge of allocating the cpuidle cooling device
+ * structure, the idle injection, initialize them and register the
+ * cooling device to the thermal framework.
+ *
+ * Return: zero on success, a negative value returned by one of the
+ * underlying subsystem in case of error
+ */
+static int __cpuidle_cooling_register(struct device_node *np,
+				      struct cpuidle_driver *drv)
+{
+	struct idle_inject_device *ii_dev;
+	struct cpuidle_cooling_device *idle_cdev;
+	struct thermal_cooling_device *cdev;
+	struct device *dev;
+	unsigned int idle_duration_us = TICK_USEC;
+	unsigned int latency_us = UINT_MAX;
+	char *name;
+	int ret;
+
+	idle_cdev = kzalloc(sizeof(*idle_cdev), GFP_KERNEL);
+	if (!idle_cdev) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ii_dev = idle_inject_register(drv->cpumask);
+	if (!ii_dev) {
+		ret = -EINVAL;
+		goto out_kfree;
+	}
+
+	of_property_read_u32(np, "duration-us", &idle_duration_us);
+	of_property_read_u32(np, "exit-latency-us", &latency_us);
+
+	idle_inject_set_duration(ii_dev, TICK_USEC, idle_duration_us);
+	idle_inject_set_latency(ii_dev, latency_us);
+
+	idle_cdev->ii_dev = ii_dev;
+
+	dev = get_cpu_device(cpumask_first(drv->cpumask));
+
+	name = kasprintf(GFP_KERNEL, "idle-%s", dev_name(dev));
+	if (!name) {
+		ret = -ENOMEM;
+		goto out_unregister;
+	}
+
+	cdev = thermal_of_cooling_device_register(np, name, idle_cdev,
+						  &cpuidle_cooling_ops);
+	if (IS_ERR(cdev)) {
+		ret = PTR_ERR(cdev);
+		goto out_kfree_name;
+	}
+
+	pr_debug("%s: Idle injection set with idle duration=%u, latency=%u\n",
+		 name, idle_duration_us, latency_us);
+
+	kfree(name);
+
+	return 0;
+
+out_kfree_name:
+	kfree(name);
+out_unregister:
+	idle_inject_unregister(ii_dev);
+out_kfree:
+	kfree(idle_cdev);
+out:
+	return ret;
+}
+
+/**
+ * cpuidle_cooling_register - Idle cooling device initialization function
+ * @drv: a cpuidle driver structure pointer
+ *
+ * This function is in charge of creating a cooling device per cpuidle
+ * driver and register it to the thermal framework.
+ *
+ * Return: zero on success, or negative value corresponding to the
+ * error detected in the underlying subsystems.
+ */
+void cpuidle_cooling_register(struct cpuidle_driver *drv)
+{
+	struct device_node *cooling_node;
+	struct device_node *cpu_node;
+	int cpu, ret;
+
+	for_each_cpu(cpu, drv->cpumask) {
+
+		cpu_node = of_cpu_device_node_get(cpu);
+
+		cooling_node = of_get_child_by_name(cpu_node, "thermal-idle");
+
+		of_node_put(cpu_node);
+
+		if (!cooling_node) {
+			pr_debug("'thermal-idle' node not found for cpu%d\n", cpu);
+			continue;
+		}
+
+		ret = __cpuidle_cooling_register(cooling_node, drv);
+
+		of_node_put(cooling_node);
+
+		if (ret) {
+			pr_err("Failed to register the cpuidle cooling device" \
+			       "for cpu%d: %d\n", cpu, ret);
+			break;
+		}
+	}
+}
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
new file mode 100644
index 000000000..7dcfde7a9
--- /dev/null
+++ b/drivers/thermal/da9062-thermal.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Thermal device driver for DA9062 and DA9061
+ * Copyright (C) 2017  Dialog Semiconductor
+ */
+
+/* When over-temperature is reached, an interrupt from the device will be
+ * triggered. Following this event the interrupt will be disabled and
+ * periodic transmission of uevents (HOT trip point) should define the
+ * first level of temperature supervision. It is expected that any final
+ * implementation of the thermal driver will include a .notify() function
+ * to implement these uevents to userspace.
+ *
+ * These uevents are intended to indicate non-invasive temperature control
+ * of the system, where the necessary measures for cooling are the
+ * responsibility of the host software. Once the temperature falls again,
+ * the IRQ is re-enabled so the start of a new over-temperature event can
+ * be detected without constant software monitoring.
+ */
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+/* Minimum, maximum and default polling millisecond periods are provided
+ * here as an example. It is expected that any final implementation to also
+ * include a modification of these settings to match the required
+ * application.
+ */
+#define DA9062_DEFAULT_POLLING_MS_PERIOD	3000
+#define DA9062_MAX_POLLING_MS_PERIOD		10000
+#define DA9062_MIN_POLLING_MS_PERIOD		1000
+
+#define DA9062_MILLI_CELSIUS(t)			((t) * 1000)
+
+struct da9062_thermal_config {
+	const char *name;
+};
+
+struct da9062_thermal {
+	struct da9062 *hw;
+	struct delayed_work work;
+	struct thermal_zone_device *zone;
+	struct mutex lock; /* protection for da9062_thermal temperature */
+	int temperature;
+	int irq;
+	const struct da9062_thermal_config *config;
+	struct device *dev;
+};
+
+static void da9062_thermal_poll_on(struct work_struct *work)
+{
+	struct da9062_thermal *thermal = container_of(work,
+						struct da9062_thermal,
+						work.work);
+	unsigned long delay;
+	unsigned int val;
+	int ret;
+
+	/* clear E_TEMP */
+	ret = regmap_write(thermal->hw->regmap,
+			   DA9062AA_EVENT_B,
+			   DA9062AA_E_TEMP_MASK);
+	if (ret < 0) {
+		dev_err(thermal->dev,
+			"Cannot clear the TJUNC temperature status\n");
+		goto err_enable_irq;
+	}
+
+	/* Now read E_TEMP again: it is acting like a status bit.
+	 * If over-temperature, then this status will be true.
+	 * If not over-temperature, this status will be false.
+	 */
+	ret = regmap_read(thermal->hw->regmap,
+			  DA9062AA_EVENT_B,
+			  &val);
+	if (ret < 0) {
+		dev_err(thermal->dev,
+			"Cannot check the TJUNC temperature status\n");
+		goto err_enable_irq;
+	}
+
+	if (val & DA9062AA_E_TEMP_MASK) {
+		mutex_lock(&thermal->lock);
+		thermal->temperature = DA9062_MILLI_CELSIUS(125);
+		mutex_unlock(&thermal->lock);
+		thermal_zone_device_update(thermal->zone,
+					   THERMAL_EVENT_UNSPECIFIED);
+
+		delay = thermal->zone->passive_delay_jiffies;
+		queue_delayed_work(system_freezable_wq, &thermal->work, delay);
+		return;
+	}
+
+	mutex_lock(&thermal->lock);
+	thermal->temperature = DA9062_MILLI_CELSIUS(0);
+	mutex_unlock(&thermal->lock);
+	thermal_zone_device_update(thermal->zone,
+				   THERMAL_EVENT_UNSPECIFIED);
+
+err_enable_irq:
+	enable_irq(thermal->irq);
+}
+
+static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
+{
+	struct da9062_thermal *thermal = data;
+
+	disable_irq_nosync(thermal->irq);
+	queue_delayed_work(system_freezable_wq, &thermal->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
+					int trip,
+					enum thermal_trip_type *type)
+{
+	struct da9062_thermal *thermal = z->devdata;
+
+	switch (trip) {
+	case 0:
+		*type = THERMAL_TRIP_HOT;
+		break;
+	default:
+		dev_err(thermal->dev,
+			"Driver does not support more than 1 trip-wire\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
+					int trip,
+					int *temp)
+{
+	struct da9062_thermal *thermal = z->devdata;
+
+	switch (trip) {
+	case 0:
+		*temp = DA9062_MILLI_CELSIUS(125);
+		break;
+	default:
+		dev_err(thermal->dev,
+			"Driver does not support more than 1 trip-wire\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int da9062_thermal_get_temp(struct thermal_zone_device *z,
+				   int *temp)
+{
+	struct da9062_thermal *thermal = z->devdata;
+
+	mutex_lock(&thermal->lock);
+	*temp = thermal->temperature;
+	mutex_unlock(&thermal->lock);
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops da9062_thermal_ops = {
+	.get_temp	= da9062_thermal_get_temp,
+	.get_trip_type	= da9062_thermal_get_trip_type,
+	.get_trip_temp	= da9062_thermal_get_trip_temp,
+};
+
+static const struct da9062_thermal_config da9062_config = {
+	.name = "da9062-thermal",
+};
+
+static const struct of_device_id da9062_compatible_reg_id_table[] = {
+	{ .compatible = "dlg,da9062-thermal", .data = &da9062_config },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, da9062_compatible_reg_id_table);
+
+static int da9062_thermal_probe(struct platform_device *pdev)
+{
+	struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
+	struct da9062_thermal *thermal;
+	unsigned int pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD;
+	const struct of_device_id *match;
+	int ret = 0;
+
+	match = of_match_node(da9062_compatible_reg_id_table,
+			      pdev->dev.of_node);
+	if (!match)
+		return -ENXIO;
+
+	if (pdev->dev.of_node) {
+		if (!of_property_read_u32(pdev->dev.of_node,
+					  "polling-delay-passive",
+					  &pp_tmp)) {
+			if (pp_tmp < DA9062_MIN_POLLING_MS_PERIOD ||
+			    pp_tmp > DA9062_MAX_POLLING_MS_PERIOD) {
+				dev_warn(&pdev->dev,
+					 "Out-of-range polling period %d ms\n",
+					 pp_tmp);
+				pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD;
+			}
+		}
+	}
+
+	thermal = devm_kzalloc(&pdev->dev, sizeof(struct da9062_thermal),
+			       GFP_KERNEL);
+	if (!thermal) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	thermal->config = match->data;
+	thermal->hw = chip;
+	thermal->dev = &pdev->dev;
+
+	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
+	mutex_init(&thermal->lock);
+
+	thermal->zone = thermal_zone_device_register(thermal->config->name,
+					1, 0, thermal,
+					&da9062_thermal_ops, NULL, pp_tmp,
+					0);
+	if (IS_ERR(thermal->zone)) {
+		dev_err(&pdev->dev, "Cannot register thermal zone device\n");
+		ret = PTR_ERR(thermal->zone);
+		goto err;
+	}
+	ret = thermal_zone_device_enable(thermal->zone);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable thermal zone device\n");
+		goto err_zone;
+	}
+
+	dev_dbg(&pdev->dev,
+		"TJUNC temperature polling period set at %d ms\n",
+		jiffies_to_msecs(thermal->zone->passive_delay_jiffies));
+
+	ret = platform_get_irq_byname(pdev, "THERMAL");
+	if (ret < 0)
+		goto err_zone;
+
+	thermal->irq = ret;
+
+	ret = request_threaded_irq(thermal->irq, NULL,
+				   da9062_thermal_irq_handler,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   "THERMAL", thermal);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to request thermal device IRQ.\n");
+		goto err_zone;
+	}
+
+	platform_set_drvdata(pdev, thermal);
+	return 0;
+
+err_zone:
+	thermal_zone_device_unregister(thermal->zone);
+err:
+	return ret;
+}
+
+static int da9062_thermal_remove(struct platform_device *pdev)
+{
+	struct	da9062_thermal *thermal = platform_get_drvdata(pdev);
+
+	free_irq(thermal->irq, thermal);
+	cancel_delayed_work_sync(&thermal->work);
+	thermal_zone_device_unregister(thermal->zone);
+	return 0;
+}
+
+static struct platform_driver da9062_thermal_driver = {
+	.probe	= da9062_thermal_probe,
+	.remove	= da9062_thermal_remove,
+	.driver	= {
+		.name	= "da9062-thermal",
+		.of_match_table = da9062_compatible_reg_id_table,
+	},
+};
+
+module_platform_driver(da9062_thermal_driver);
+
+MODULE_AUTHOR("Steve Twiss");
+MODULE_DESCRIPTION("Thermal TJUNC device driver for Dialog DA9062 and DA9061");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9062-thermal");
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
new file mode 100644
index 000000000..cb10e2806
--- /dev/null
+++ b/drivers/thermal/db8500_thermal.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * db8500_thermal.c - DB8500 Thermal Management Implementation
+ *
+ * Copyright (C) 2012 ST-Ericsson
+ * Copyright (C) 2012-2019 Linaro Ltd.
+ *
+ * Authors: Hongbo Zhang, Linus Walleij
+ */
+
+#include <linux/cpu_cooling.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define PRCMU_DEFAULT_MEASURE_TIME	0xFFF
+#define PRCMU_DEFAULT_LOW_TEMP		0
+
+/**
+ * db8500_thermal_points - the interpolation points that trigger
+ * interrupts
+ */
+static const unsigned long db8500_thermal_points[] = {
+	15000,
+	20000,
+	25000,
+	30000,
+	35000,
+	40000,
+	45000,
+	50000,
+	55000,
+	60000,
+	65000,
+	70000,
+	75000,
+	80000,
+	/*
+	 * This is where things start to get really bad for the
+	 * SoC and the thermal zones should be set up to trigger
+	 * critical temperature at 85000 mC so we don't get above
+	 * this point.
+	 */
+	85000,
+	90000,
+	95000,
+	100000,
+};
+
+struct db8500_thermal_zone {
+	struct thermal_zone_device *tz;
+	unsigned long interpolated_temp;
+	unsigned int cur_index;
+};
+
+/* Callback to get current temperature */
+static int db8500_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct db8500_thermal_zone *th = tz->devdata;
+
+	/*
+	 * TODO: There is no PRCMU interface to get temperature data currently,
+	 * so a pseudo temperature is returned , it works for thermal framework
+	 * and this will be fixed when the PRCMU interface is available.
+	 */
+	*temp = th->interpolated_temp;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops thdev_ops = {
+	.get_temp = db8500_thermal_get_temp,
+};
+
+static void db8500_thermal_update_config(struct db8500_thermal_zone *th,
+					 unsigned int idx,
+					 unsigned long next_low,
+					 unsigned long next_high)
+{
+	prcmu_stop_temp_sense();
+
+	th->cur_index = idx;
+	th->interpolated_temp = (next_low + next_high)/2;
+
+	/*
+	 * The PRCMU accept absolute temperatures in celsius so divide
+	 * down the millicelsius with 1000
+	 */
+	prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000));
+	prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
+}
+
+static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data)
+{
+	struct db8500_thermal_zone *th = irq_data;
+	unsigned int idx = th->cur_index;
+	unsigned long next_low, next_high;
+
+	if (idx == 0)
+		/* Meaningless for thermal management, ignoring it */
+		return IRQ_HANDLED;
+
+	if (idx == 1) {
+		next_high = db8500_thermal_points[0];
+		next_low = PRCMU_DEFAULT_LOW_TEMP;
+	} else {
+		next_high = db8500_thermal_points[idx - 1];
+		next_low = db8500_thermal_points[idx - 2];
+	}
+	idx -= 1;
+
+	db8500_thermal_update_config(th, idx, next_low, next_high);
+	dev_dbg(&th->tz->device,
+		"PRCMU set max %ld, min %ld\n", next_high, next_low);
+
+	thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data)
+{
+	struct db8500_thermal_zone *th = irq_data;
+	unsigned int idx = th->cur_index;
+	unsigned long next_low, next_high;
+	int num_points = ARRAY_SIZE(db8500_thermal_points);
+
+	if (idx < num_points - 1) {
+		next_high = db8500_thermal_points[idx+1];
+		next_low = db8500_thermal_points[idx];
+		idx += 1;
+
+		db8500_thermal_update_config(th, idx, next_low, next_high);
+
+		dev_dbg(&th->tz->device,
+			"PRCMU set max %ld, min %ld\n", next_high, next_low);
+	} else if (idx == num_points - 1)
+		/* So we roof out 1 degree over the max point */
+		th->interpolated_temp = db8500_thermal_points[idx] + 1;
+
+	thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static int db8500_thermal_probe(struct platform_device *pdev)
+{
+	struct db8500_thermal_zone *th = NULL;
+	struct device *dev = &pdev->dev;
+	int low_irq, high_irq, ret = 0;
+
+	th = devm_kzalloc(dev, sizeof(*th), GFP_KERNEL);
+	if (!th)
+		return -ENOMEM;
+
+	low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
+	if (low_irq < 0)
+		return low_irq;
+
+	ret = devm_request_threaded_irq(dev, low_irq, NULL,
+		prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		"dbx500_temp_low", th);
+	if (ret < 0) {
+		dev_err(dev, "failed to allocate temp low irq\n");
+		return ret;
+	}
+
+	high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");
+	if (high_irq < 0)
+		return high_irq;
+
+	ret = devm_request_threaded_irq(dev, high_irq, NULL,
+		prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		"dbx500_temp_high", th);
+	if (ret < 0) {
+		dev_err(dev, "failed to allocate temp high irq\n");
+		return ret;
+	}
+
+	/* register of thermal sensor and get info from DT */
+	th->tz = devm_thermal_of_zone_register(dev, 0, th, &thdev_ops);
+	if (IS_ERR(th->tz)) {
+		dev_err(dev, "register thermal zone sensor failed\n");
+		return PTR_ERR(th->tz);
+	}
+	dev_info(dev, "thermal zone sensor registered\n");
+
+	/* Start measuring at the lowest point */
+	db8500_thermal_update_config(th, 0, PRCMU_DEFAULT_LOW_TEMP,
+				     db8500_thermal_points[0]);
+
+	platform_set_drvdata(pdev, th);
+
+	return 0;
+}
+
+static int db8500_thermal_suspend(struct platform_device *pdev,
+		pm_message_t state)
+{
+	prcmu_stop_temp_sense();
+
+	return 0;
+}
+
+static int db8500_thermal_resume(struct platform_device *pdev)
+{
+	struct db8500_thermal_zone *th = platform_get_drvdata(pdev);
+
+	/* Resume and start measuring at the lowest point */
+	db8500_thermal_update_config(th, 0, PRCMU_DEFAULT_LOW_TEMP,
+				     db8500_thermal_points[0]);
+
+	return 0;
+}
+
+static const struct of_device_id db8500_thermal_match[] = {
+	{ .compatible = "stericsson,db8500-thermal" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, db8500_thermal_match);
+
+static struct platform_driver db8500_thermal_driver = {
+	.driver = {
+		.name = "db8500-thermal",
+		.of_match_table = of_match_ptr(db8500_thermal_match),
+	},
+	.probe = db8500_thermal_probe,
+	.suspend = db8500_thermal_suspend,
+	.resume = db8500_thermal_resume,
+};
+
+module_platform_driver(db8500_thermal_driver);
+
+MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
+MODULE_DESCRIPTION("DB8500 thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
new file mode 100644
index 000000000..24b474925
--- /dev/null
+++ b/drivers/thermal/devfreq_cooling.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * devfreq_cooling: Thermal cooling device implementation for devices using
+ *                  devfreq
+ *
+ * Copyright (C) 2014-2015 ARM Limited
+ *
+ * TODO:
+ *    - If OPPs are added or removed after devfreq cooling has
+ *      registered, the devfreq cooling won't react to it.
+ */
+
+#include <linux/devfreq.h>
+#include <linux/devfreq_cooling.h>
+#include <linux/energy_model.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_qos.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include <trace/events/thermal.h>
+
+#define SCALE_ERROR_MITIGATION	100
+
+/**
+ * struct devfreq_cooling_device - Devfreq cooling device
+ *		devfreq_cooling_device registered.
+ * @cdev:	Pointer to associated thermal cooling device.
+ * @cooling_ops: devfreq callbacks to thermal cooling device ops
+ * @devfreq:	Pointer to associated devfreq device.
+ * @cooling_state:	Current cooling state.
+ * @freq_table:	Pointer to a table with the frequencies sorted in descending
+ *		order.  You can index the table by cooling device state
+ * @max_state:	It is the last index, that is, one less than the number of the
+ *		OPPs
+ * @power_ops:	Pointer to devfreq_cooling_power, a more precised model.
+ * @res_util:	Resource utilization scaling factor for the power.
+ *		It is multiplied by 100 to minimize the error. It is used
+ *		for estimation of the power budget instead of using
+ *		'utilization' (which is	'busy_time' / 'total_time').
+ *		The 'res_util' range is from 100 to power * 100	for the
+ *		corresponding 'state'.
+ * @capped_state:	index to cooling state with in dynamic power budget
+ * @req_max_freq:	PM QoS request for limiting the maximum frequency
+ *			of the devfreq device.
+ * @em_pd:		Energy Model for the associated Devfreq device
+ */
+struct devfreq_cooling_device {
+	struct thermal_cooling_device *cdev;
+	struct thermal_cooling_device_ops cooling_ops;
+	struct devfreq *devfreq;
+	unsigned long cooling_state;
+	u32 *freq_table;
+	size_t max_state;
+	struct devfreq_cooling_power *power_ops;
+	u32 res_util;
+	int capped_state;
+	struct dev_pm_qos_request req_max_freq;
+	struct em_perf_domain *em_pd;
+};
+
+static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
+					 unsigned long *state)
+{
+	struct devfreq_cooling_device *dfc = cdev->devdata;
+
+	*state = dfc->max_state;
+
+	return 0;
+}
+
+static int devfreq_cooling_get_cur_state(struct thermal_cooling_device *cdev,
+					 unsigned long *state)
+{
+	struct devfreq_cooling_device *dfc = cdev->devdata;
+
+	*state = dfc->cooling_state;
+
+	return 0;
+}
+
+static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
+					 unsigned long state)
+{
+	struct devfreq_cooling_device *dfc = cdev->devdata;
+	struct devfreq *df = dfc->devfreq;
+	struct device *dev = df->dev.parent;
+	unsigned long freq;
+	int perf_idx;
+
+	if (state == dfc->cooling_state)
+		return 0;
+
+	dev_dbg(dev, "Setting cooling state %lu\n", state);
+
+	if (state > dfc->max_state)
+		return -EINVAL;
+
+	if (dfc->em_pd) {
+		perf_idx = dfc->max_state - state;
+		freq = dfc->em_pd->table[perf_idx].frequency * 1000;
+	} else {
+		freq = dfc->freq_table[state];
+	}
+
+	dev_pm_qos_update_request(&dfc->req_max_freq,
+				  DIV_ROUND_UP(freq, HZ_PER_KHZ));
+
+	dfc->cooling_state = state;
+
+	return 0;
+}
+
+/**
+ * get_perf_idx() - get the performance index corresponding to a frequency
+ * @em_pd:	Pointer to device's Energy Model
+ * @freq:	frequency in kHz
+ *
+ * Return: the performance index associated with the @freq, or
+ * -EINVAL if it wasn't found.
+ */
+static int get_perf_idx(struct em_perf_domain *em_pd, unsigned long freq)
+{
+	int i;
+
+	for (i = 0; i < em_pd->nr_perf_states; i++) {
+		if (em_pd->table[i].frequency == freq)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long get_voltage(struct devfreq *df, unsigned long freq)
+{
+	struct device *dev = df->dev.parent;
+	unsigned long voltage;
+	struct dev_pm_opp *opp;
+
+	opp = dev_pm_opp_find_freq_exact(dev, freq, true);
+	if (PTR_ERR(opp) == -ERANGE)
+		opp = dev_pm_opp_find_freq_exact(dev, freq, false);
+
+	if (IS_ERR(opp)) {
+		dev_err_ratelimited(dev, "Failed to find OPP for frequency %lu: %ld\n",
+				    freq, PTR_ERR(opp));
+		return 0;
+	}
+
+	voltage = dev_pm_opp_get_voltage(opp) / 1000; /* mV */
+	dev_pm_opp_put(opp);
+
+	if (voltage == 0) {
+		dev_err_ratelimited(dev,
+				    "Failed to get voltage for frequency %lu\n",
+				    freq);
+	}
+
+	return voltage;
+}
+
+static void _normalize_load(struct devfreq_dev_status *status)
+{
+	if (status->total_time > 0xfffff) {
+		status->total_time >>= 10;
+		status->busy_time >>= 10;
+	}
+
+	status->busy_time <<= 10;
+	status->busy_time /= status->total_time ? : 1;
+
+	status->busy_time = status->busy_time ? : 1;
+	status->total_time = 1024;
+}
+
+static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cdev,
+					       u32 *power)
+{
+	struct devfreq_cooling_device *dfc = cdev->devdata;
+	struct devfreq *df = dfc->devfreq;
+	struct devfreq_dev_status status;
+	unsigned long state;
+	unsigned long freq;
+	unsigned long voltage;
+	int res, perf_idx;
+
+	mutex_lock(&df->lock);
+	status = df->last_status;
+	mutex_unlock(&df->lock);
+
+	freq = status.current_frequency;
+
+	if (dfc->power_ops && dfc->power_ops->get_real_power) {
+		voltage = get_voltage(df, freq);
+		if (voltage == 0) {
+			res = -EINVAL;
+			goto fail;
+		}
+
+		res = dfc->power_ops->get_real_power(df, power, freq, voltage);
+		if (!res) {
+			state = dfc->capped_state;
+
+			/* Convert EM power into milli-Watts first */
+			dfc->res_util = dfc->em_pd->table[state].power;
+			dfc->res_util /= MICROWATT_PER_MILLIWATT;
+
+			dfc->res_util *= SCALE_ERROR_MITIGATION;
+
+			if (*power > 1)
+				dfc->res_util /= *power;
+		} else {
+			goto fail;
+		}
+	} else {
+		/* Energy Model frequencies are in kHz */
+		perf_idx = get_perf_idx(dfc->em_pd, freq / 1000);
+		if (perf_idx < 0) {
+			res = -EAGAIN;
+			goto fail;
+		}
+
+		_normalize_load(&status);
+
+		/* Convert EM power into milli-Watts first */
+		*power = dfc->em_pd->table[perf_idx].power;
+		*power /= MICROWATT_PER_MILLIWATT;
+		/* Scale power for utilization */
+		*power *= status.busy_time;
+		*power >>= 10;
+	}
+
+	trace_thermal_power_devfreq_get_power(cdev, &status, freq, *power);
+
+	return 0;
+fail:
+	/* It is safe to set max in this case */
+	dfc->res_util = SCALE_ERROR_MITIGATION;
+	return res;
+}
+
+static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev,
+				       unsigned long state, u32 *power)
+{
+	struct devfreq_cooling_device *dfc = cdev->devdata;
+	int perf_idx;
+
+	if (state > dfc->max_state)
+		return -EINVAL;
+
+	perf_idx = dfc->max_state - state;
+	*power = dfc->em_pd->table[perf_idx].power;
+	*power /= MICROWATT_PER_MILLIWATT;
+
+	return 0;
+}
+
+static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
+				       u32 power, unsigned long *state)
+{
+	struct devfreq_cooling_device *dfc = cdev->devdata;
+	struct devfreq *df = dfc->devfreq;
+	struct devfreq_dev_status status;
+	unsigned long freq, em_power_mw;
+	s32 est_power;
+	int i;
+
+	mutex_lock(&df->lock);
+	status = df->last_status;
+	mutex_unlock(&df->lock);
+
+	freq = status.current_frequency;
+
+	if (dfc->power_ops && dfc->power_ops->get_real_power) {
+		/* Scale for resource utilization */
+		est_power = power * dfc->res_util;
+		est_power /= SCALE_ERROR_MITIGATION;
+	} else {
+		/* Scale dynamic power for utilization */
+		_normalize_load(&status);
+		est_power = power << 10;
+		est_power /= status.busy_time;
+	}
+
+	/*
+	 * Find the first cooling state that is within the power
+	 * budget. The EM power table is sorted ascending.
+	 */
+	for (i = dfc->max_state; i > 0; i--) {
+		/* Convert EM power to milli-Watts to make safe comparison */
+		em_power_mw = dfc->em_pd->table[i].power;
+		em_power_mw /= MICROWATT_PER_MILLIWATT;
+		if (est_power >= em_power_mw)
+			break;
+	}
+
+	*state = dfc->max_state - i;
+	dfc->capped_state = *state;
+
+	trace_thermal_power_devfreq_limit(cdev, freq, *state, power);
+	return 0;
+}
+
+/**
+ * devfreq_cooling_gen_tables() - Generate frequency table.
+ * @dfc:	Pointer to devfreq cooling device.
+ * @num_opps:	Number of OPPs
+ *
+ * Generate frequency table which holds the frequencies in descending
+ * order. That way its indexed by cooling device state. This is for
+ * compatibility with drivers which do not register Energy Model.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc,
+				      int num_opps)
+{
+	struct devfreq *df = dfc->devfreq;
+	struct device *dev = df->dev.parent;
+	unsigned long freq;
+	int i;
+
+	dfc->freq_table = kcalloc(num_opps, sizeof(*dfc->freq_table),
+			     GFP_KERNEL);
+	if (!dfc->freq_table)
+		return -ENOMEM;
+
+	for (i = 0, freq = ULONG_MAX; i < num_opps; i++, freq--) {
+		struct dev_pm_opp *opp;
+
+		opp = dev_pm_opp_find_freq_floor(dev, &freq);
+		if (IS_ERR(opp)) {
+			kfree(dfc->freq_table);
+			return PTR_ERR(opp);
+		}
+
+		dev_pm_opp_put(opp);
+		dfc->freq_table[i] = freq;
+	}
+
+	return 0;
+}
+
+/**
+ * of_devfreq_cooling_register_power() - Register devfreq cooling device,
+ *                                      with OF and power information.
+ * @np:	Pointer to OF device_node.
+ * @df:	Pointer to devfreq device.
+ * @dfc_power:	Pointer to devfreq_cooling_power.
+ *
+ * Register a devfreq cooling device.  The available OPPs must be
+ * registered on the device.
+ *
+ * If @dfc_power is provided, the cooling device is registered with the
+ * power extensions.  For the power extensions to work correctly,
+ * devfreq should use the simple_ondemand governor, other governors
+ * are not currently supported.
+ */
+struct thermal_cooling_device *
+of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
+				  struct devfreq_cooling_power *dfc_power)
+{
+	struct thermal_cooling_device *cdev;
+	struct device *dev = df->dev.parent;
+	struct devfreq_cooling_device *dfc;
+	struct em_perf_domain *em;
+	struct thermal_cooling_device_ops *ops;
+	char *name;
+	int err, num_opps;
+
+
+	dfc = kzalloc(sizeof(*dfc), GFP_KERNEL);
+	if (!dfc)
+		return ERR_PTR(-ENOMEM);
+
+	dfc->devfreq = df;
+
+	ops = &dfc->cooling_ops;
+	ops->get_max_state = devfreq_cooling_get_max_state;
+	ops->get_cur_state = devfreq_cooling_get_cur_state;
+	ops->set_cur_state = devfreq_cooling_set_cur_state;
+
+	em = em_pd_get(dev);
+	if (em && !em_is_artificial(em)) {
+		dfc->em_pd = em;
+		ops->get_requested_power =
+			devfreq_cooling_get_requested_power;
+		ops->state2power = devfreq_cooling_state2power;
+		ops->power2state = devfreq_cooling_power2state;
+
+		dfc->power_ops = dfc_power;
+
+		num_opps = em_pd_nr_perf_states(dfc->em_pd);
+	} else {
+		/* Backward compatibility for drivers which do not use IPA */
+		dev_dbg(dev, "missing proper EM for cooling device\n");
+
+		num_opps = dev_pm_opp_get_opp_count(dev);
+
+		err = devfreq_cooling_gen_tables(dfc, num_opps);
+		if (err)
+			goto free_dfc;
+	}
+
+	if (num_opps <= 0) {
+		err = -EINVAL;
+		goto free_dfc;
+	}
+
+	/* max_state is an index, not a counter */
+	dfc->max_state = num_opps - 1;
+
+	err = dev_pm_qos_add_request(dev, &dfc->req_max_freq,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
+	if (err < 0)
+		goto free_table;
+
+	err = -ENOMEM;
+	name = kasprintf(GFP_KERNEL, "devfreq-%s", dev_name(dev));
+	if (!name)
+		goto remove_qos_req;
+
+	cdev = thermal_of_cooling_device_register(np, name, dfc, ops);
+	kfree(name);
+
+	if (IS_ERR(cdev)) {
+		err = PTR_ERR(cdev);
+		dev_err(dev,
+			"Failed to register devfreq cooling device (%d)\n",
+			err);
+		goto remove_qos_req;
+	}
+
+	dfc->cdev = cdev;
+
+	return cdev;
+
+remove_qos_req:
+	dev_pm_qos_remove_request(&dfc->req_max_freq);
+free_table:
+	kfree(dfc->freq_table);
+free_dfc:
+	kfree(dfc);
+
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(of_devfreq_cooling_register_power);
+
+/**
+ * of_devfreq_cooling_register() - Register devfreq cooling device,
+ *                                with OF information.
+ * @np: Pointer to OF device_node.
+ * @df: Pointer to devfreq device.
+ */
+struct thermal_cooling_device *
+of_devfreq_cooling_register(struct device_node *np, struct devfreq *df)
+{
+	return of_devfreq_cooling_register_power(np, df, NULL);
+}
+EXPORT_SYMBOL_GPL(of_devfreq_cooling_register);
+
+/**
+ * devfreq_cooling_register() - Register devfreq cooling device.
+ * @df: Pointer to devfreq device.
+ */
+struct thermal_cooling_device *devfreq_cooling_register(struct devfreq *df)
+{
+	return of_devfreq_cooling_register(NULL, df);
+}
+EXPORT_SYMBOL_GPL(devfreq_cooling_register);
+
+/**
+ * devfreq_cooling_em_register() - Register devfreq cooling device with
+ *		power information and automatically register Energy Model (EM)
+ * @df:		Pointer to devfreq device.
+ * @dfc_power:	Pointer to devfreq_cooling_power.
+ *
+ * Register a devfreq cooling device and automatically register EM. The
+ * available OPPs must be registered for the device.
+ *
+ * If @dfc_power is provided, the cooling device is registered with the
+ * power extensions. It is using the simple Energy Model which requires
+ * "dynamic-power-coefficient" a devicetree property. To not break drivers
+ * which miss that DT property, the function won't bail out when the EM
+ * registration failed. The cooling device will be registered if everything
+ * else is OK.
+ */
+struct thermal_cooling_device *
+devfreq_cooling_em_register(struct devfreq *df,
+			    struct devfreq_cooling_power *dfc_power)
+{
+	struct thermal_cooling_device *cdev;
+	struct device *dev;
+	int ret;
+
+	if (IS_ERR_OR_NULL(df))
+		return ERR_PTR(-EINVAL);
+
+	dev = df->dev.parent;
+
+	ret = dev_pm_opp_of_register_em(dev, NULL);
+	if (ret)
+		dev_dbg(dev, "Unable to register EM for devfreq cooling device (%d)\n",
+			ret);
+
+	cdev = of_devfreq_cooling_register_power(dev->of_node, df, dfc_power);
+
+	if (IS_ERR_OR_NULL(cdev))
+		em_dev_unregister_perf_domain(dev);
+
+	return cdev;
+}
+EXPORT_SYMBOL_GPL(devfreq_cooling_em_register);
+
+/**
+ * devfreq_cooling_unregister() - Unregister devfreq cooling device.
+ * @cdev: Pointer to devfreq cooling device to unregister.
+ *
+ * Unregisters devfreq cooling device and related Energy Model if it was
+ * present.
+ */
+void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
+{
+	struct devfreq_cooling_device *dfc;
+	struct device *dev;
+
+	if (IS_ERR_OR_NULL(cdev))
+		return;
+
+	dfc = cdev->devdata;
+	dev = dfc->devfreq->dev.parent;
+
+	thermal_cooling_device_unregister(dfc->cdev);
+	dev_pm_qos_remove_request(&dfc->req_max_freq);
+
+	em_dev_unregister_perf_domain(dev);
+
+	kfree(dfc->freq_table);
+	kfree(dfc);
+}
+EXPORT_SYMBOL_GPL(devfreq_cooling_unregister);
diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
new file mode 100644
index 000000000..73182eb94
--- /dev/null
+++ b/drivers/thermal/dove_thermal.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Dove thermal sensor driver
+ *
+ * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define DOVE_THERMAL_TEMP_OFFSET	1
+#define DOVE_THERMAL_TEMP_MASK		0x1FF
+
+/* Dove Thermal Manager Control and Status Register */
+#define PMU_TM_DISABLE_OFFS		0
+#define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS)
+
+/* Dove Theraml Diode Control 0 Register */
+#define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
+#define PMU_TDC0_SEL_VCAL_OFFS		5
+#define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS)
+#define PMU_TDC0_REF_CAL_CNT_OFFS	11
+#define PMU_TDC0_REF_CAL_CNT_MASK	(0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
+#define PMU_TDC0_AVG_NUM_OFFS		25
+#define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS)
+
+/* Dove Thermal Diode Control 1 Register */
+#define PMU_TEMP_DIOD_CTRL1_REG		0x04
+#define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10)
+
+/* Dove Thermal Sensor Dev Structure */
+struct dove_thermal_priv {
+	void __iomem *sensor;
+	void __iomem *control;
+};
+
+static int dove_init_sensor(const struct dove_thermal_priv *priv)
+{
+	u32 reg;
+	u32 i;
+
+	/* Configure the Diode Control Register #0 */
+	reg = readl_relaxed(priv->control);
+
+	/* Use average of 2 */
+	reg &= ~PMU_TDC0_AVG_NUM_MASK;
+	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
+
+	/* Reference calibration value */
+	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+
+	/* Set the high level reference for calibration */
+	reg &= ~PMU_TDC0_SEL_VCAL_MASK;
+	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
+	writel(reg, priv->control);
+
+	/* Reset the sensor */
+	reg = readl_relaxed(priv->control);
+	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
+	writel(reg, priv->control);
+
+	/* Enable the sensor */
+	reg = readl_relaxed(priv->sensor);
+	reg &= ~PMU_TM_DISABLE_MASK;
+	writel(reg, priv->sensor);
+
+	/* Poll the sensor for the first reading */
+	for (i = 0; i < 1000000; i++) {
+		reg = readl_relaxed(priv->sensor);
+		if (reg & DOVE_THERMAL_TEMP_MASK)
+			break;
+	}
+
+	if (i == 1000000)
+		return -EIO;
+
+	return 0;
+}
+
+static int dove_get_temp(struct thermal_zone_device *thermal,
+			  int *temp)
+{
+	unsigned long reg;
+	struct dove_thermal_priv *priv = thermal->devdata;
+
+	/* Valid check */
+	reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
+	if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) {
+		dev_err(&thermal->device,
+			"Temperature sensor reading not valid\n");
+		return -EIO;
+	}
+
+	/*
+	 * Calculate temperature. According to Marvell internal
+	 * documentation the formula for this is:
+	 * Celsius = (322-reg)/1.3625
+	 */
+	reg = readl_relaxed(priv->sensor);
+	reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
+	*temp = ((3220000000UL - (10000000UL * reg)) / 13625);
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+	.get_temp = dove_get_temp,
+};
+
+static const struct of_device_id dove_thermal_id_table[] = {
+	{ .compatible = "marvell,dove-thermal" },
+	{}
+};
+
+static int dove_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal = NULL;
+	struct dove_thermal_priv *priv;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->sensor))
+		return PTR_ERR(priv->sensor);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	priv->control = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->control))
+		return PTR_ERR(priv->control);
+
+	ret = dove_init_sensor(priv);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize sensor\n");
+		return ret;
+	}
+
+	thermal = thermal_zone_device_register("dove_thermal", 0, 0,
+					       priv, &ops, NULL, 0, 0);
+	if (IS_ERR(thermal)) {
+		dev_err(&pdev->dev,
+			"Failed to register thermal zone device\n");
+		return PTR_ERR(thermal);
+	}
+
+	ret = thermal_zone_device_enable(thermal);
+	if (ret) {
+		thermal_zone_device_unregister(thermal);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, thermal);
+
+	return 0;
+}
+
+static int dove_thermal_exit(struct platform_device *pdev)
+{
+	struct thermal_zone_device *dove_thermal =
+		platform_get_drvdata(pdev);
+
+	thermal_zone_device_unregister(dove_thermal);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
+
+static struct platform_driver dove_thermal_driver = {
+	.probe = dove_thermal_probe,
+	.remove = dove_thermal_exit,
+	.driver = {
+		.name = "dove_thermal",
+		.of_match_table = dove_thermal_id_table,
+	},
+};
+
+module_platform_driver(dove_thermal_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("Dove thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c
new file mode 100644
index 000000000..a08bbe33b
--- /dev/null
+++ b/drivers/thermal/gov_bang_bang.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  gov_bang_bang.c - A simple thermal throttling governor using hysteresis
+ *
+ *  Copyright (C) 2014 Peter Kaestle <peter@piie.net>
+ *
+ *  Based on step_wise.c with following Copyrights:
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ */
+
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
+{
+	int trip_temp, trip_hyst;
+	struct thermal_instance *instance;
+
+	tz->ops->get_trip_temp(tz, trip, &trip_temp);
+
+	if (!tz->ops->get_trip_hyst) {
+		pr_warn_once("Undefined get_trip_hyst for thermal zone %s - "
+				"running with default hysteresis zero\n", tz->type);
+		trip_hyst = 0;
+	} else
+		tz->ops->get_trip_hyst(tz, trip, &trip_hyst);
+
+	dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n",
+				trip, trip_temp, tz->temperature,
+				trip_hyst);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip)
+			continue;
+
+		/* in case fan is in initial state, switch the fan off */
+		if (instance->target == THERMAL_NO_TARGET)
+			instance->target = 0;
+
+		/* in case fan is neither on nor off set the fan to active */
+		if (instance->target != 0 && instance->target != 1) {
+			pr_warn("Thermal instance %s controlled by bang-bang has unexpected state: %ld\n",
+					instance->name, instance->target);
+			instance->target = 1;
+		}
+
+		/*
+		 * enable fan when temperature exceeds trip_temp and disable
+		 * the fan in case it falls below trip_temp minus hysteresis
+		 */
+		if (instance->target == 0 && tz->temperature >= trip_temp)
+			instance->target = 1;
+		else if (instance->target == 1 &&
+				tz->temperature <= trip_temp - trip_hyst)
+			instance->target = 0;
+
+		dev_dbg(&instance->cdev->device, "target=%d\n",
+					(int)instance->target);
+
+		mutex_lock(&instance->cdev->lock);
+		instance->cdev->updated = false; /* cdev needs update */
+		mutex_unlock(&instance->cdev->lock);
+	}
+}
+
+/**
+ * bang_bang_control - controls devices associated with the given zone
+ * @tz: thermal_zone_device
+ * @trip: the trip point
+ *
+ * Regulation Logic: a two point regulation, deliver cooling state depending
+ * on the previous state shown in this diagram:
+ *
+ *                Fan:   OFF    ON
+ *
+ *                              |
+ *                              |
+ *          trip_temp:    +---->+
+ *                        |     |        ^
+ *                        |     |        |
+ *                        |     |   Temperature
+ * (trip_temp - hyst):    +<----+
+ *                        |
+ *                        |
+ *                        |
+ *
+ *   * If the fan is not running and temperature exceeds trip_temp, the fan
+ *     gets turned on.
+ *   * In case the fan is running, temperature must fall below
+ *     (trip_temp - hyst) so that the fan gets turned off again.
+ *
+ */
+static int bang_bang_control(struct thermal_zone_device *tz, int trip)
+{
+	struct thermal_instance *instance;
+
+	lockdep_assert_held(&tz->lock);
+
+	thermal_zone_trip_update(tz, trip);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node)
+		thermal_cdev_update(instance->cdev);
+
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_bang_bang = {
+	.name		= "bang_bang",
+	.throttle	= bang_bang_control,
+};
+THERMAL_GOVERNOR_DECLARE(thermal_gov_bang_bang);
diff --git a/drivers/thermal/gov_fair_share.c b/drivers/thermal/gov_fair_share.c
new file mode 100644
index 000000000..1cfeac16e
--- /dev/null
+++ b/drivers/thermal/gov_fair_share.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  fair_share.c - A simple weight based Thermal governor
+ *
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/thermal.h>
+#include <trace/events/thermal.h>
+
+#include "thermal_core.h"
+
+/**
+ * get_trip_level: - obtains the current trip level for a zone
+ * @tz:		thermal zone device
+ */
+static int get_trip_level(struct thermal_zone_device *tz)
+{
+	int count = 0;
+	int trip_temp;
+	enum thermal_trip_type trip_type;
+
+	if (tz->num_trips == 0 || !tz->ops->get_trip_temp)
+		return 0;
+
+	for (count = 0; count < tz->num_trips; count++) {
+		tz->ops->get_trip_temp(tz, count, &trip_temp);
+		if (tz->temperature < trip_temp)
+			break;
+	}
+
+	/*
+	 * count > 0 only if temperature is greater than first trip
+	 * point, in which case, trip_point = count - 1
+	 */
+	if (count > 0) {
+		tz->ops->get_trip_type(tz, count - 1, &trip_type);
+		trace_thermal_zone_trip(tz, count - 1, trip_type);
+	}
+
+	return count;
+}
+
+static long get_target_state(struct thermal_zone_device *tz,
+		struct thermal_cooling_device *cdev, int percentage, int level)
+{
+	return (long)(percentage * level * cdev->max_state) / (100 * tz->num_trips);
+}
+
+/**
+ * fair_share_throttle - throttles devices associated with the given zone
+ * @tz: thermal_zone_device
+ * @trip: trip point index
+ *
+ * Throttling Logic: This uses three parameters to calculate the new
+ * throttle state of the cooling devices associated with the given zone.
+ *
+ * Parameters used for Throttling:
+ * P1. max_state: Maximum throttle state exposed by the cooling device.
+ * P2. percentage[i]/100:
+ *	How 'effective' the 'i'th device is, in cooling the given zone.
+ * P3. cur_trip_level/max_no_of_trips:
+ *	This describes the extent to which the devices should be throttled.
+ *	We do not want to throttle too much when we trip a lower temperature,
+ *	whereas the throttling is at full swing if we trip critical levels.
+ *	(Heavily assumes the trip points are in ascending order)
+ * new_state of cooling device = P3 * P2 * P1
+ */
+static int fair_share_throttle(struct thermal_zone_device *tz, int trip)
+{
+	struct thermal_instance *instance;
+	int total_weight = 0;
+	int total_instance = 0;
+	int cur_trip_level = get_trip_level(tz);
+
+	lockdep_assert_held(&tz->lock);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip)
+			continue;
+
+		total_weight += instance->weight;
+		total_instance++;
+	}
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		int percentage;
+		struct thermal_cooling_device *cdev = instance->cdev;
+
+		if (instance->trip != trip)
+			continue;
+
+		if (!total_weight)
+			percentage = 100 / total_instance;
+		else
+			percentage = (instance->weight * 100) / total_weight;
+
+		instance->target = get_target_state(tz, cdev, percentage,
+						    cur_trip_level);
+
+		mutex_lock(&cdev->lock);
+		__thermal_cdev_update(cdev);
+		mutex_unlock(&cdev->lock);
+	}
+
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_fair_share = {
+	.name		= "fair_share",
+	.throttle	= fair_share_throttle,
+};
+THERMAL_GOVERNOR_DECLARE(thermal_gov_fair_share);
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
new file mode 100644
index 000000000..2d1aeaba3
--- /dev/null
+++ b/drivers/thermal/gov_power_allocator.c
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * A power allocator to manage temperature
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ */
+
+#define pr_fmt(fmt) "Power allocator: " fmt
+
+#include <linux/rculist.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/thermal_power_allocator.h>
+
+#include "thermal_core.h"
+
+#define INVALID_TRIP -1
+
+#define FRAC_BITS 10
+#define int_to_frac(x) ((x) << FRAC_BITS)
+#define frac_to_int(x) ((x) >> FRAC_BITS)
+
+/**
+ * mul_frac() - multiply two fixed-point numbers
+ * @x:	first multiplicand
+ * @y:	second multiplicand
+ *
+ * Return: the result of multiplying two fixed-point numbers.  The
+ * result is also a fixed-point number.
+ */
+static inline s64 mul_frac(s64 x, s64 y)
+{
+	return (x * y) >> FRAC_BITS;
+}
+
+/**
+ * div_frac() - divide two fixed-point numbers
+ * @x:	the dividend
+ * @y:	the divisor
+ *
+ * Return: the result of dividing two fixed-point numbers.  The
+ * result is also a fixed-point number.
+ */
+static inline s64 div_frac(s64 x, s64 y)
+{
+	return div_s64(x << FRAC_BITS, y);
+}
+
+/**
+ * struct power_allocator_params - parameters for the power allocator governor
+ * @allocated_tzp:	whether we have allocated tzp for this thermal zone and
+ *			it needs to be freed on unbind
+ * @err_integral:	accumulated error in the PID controller.
+ * @prev_err:	error in the previous iteration of the PID controller.
+ *		Used to calculate the derivative term.
+ * @trip_switch_on:	first passive trip point of the thermal zone.  The
+ *			governor switches on when this trip point is crossed.
+ *			If the thermal zone only has one passive trip point,
+ *			@trip_switch_on should be INVALID_TRIP.
+ * @trip_max_desired_temperature:	last passive trip point of the thermal
+ *					zone.  The temperature we are
+ *					controlling for.
+ * @sustainable_power:	Sustainable power (heat) that this thermal zone can
+ *			dissipate
+ */
+struct power_allocator_params {
+	bool allocated_tzp;
+	s64 err_integral;
+	s32 prev_err;
+	int trip_switch_on;
+	int trip_max_desired_temperature;
+	u32 sustainable_power;
+};
+
+/**
+ * estimate_sustainable_power() - Estimate the sustainable power of a thermal zone
+ * @tz: thermal zone we are operating in
+ *
+ * For thermal zones that don't provide a sustainable_power in their
+ * thermal_zone_params, estimate one.  Calculate it using the minimum
+ * power of all the cooling devices as that gives a valid value that
+ * can give some degree of functionality.  For optimal performance of
+ * this governor, provide a sustainable_power in the thermal zone's
+ * thermal_zone_params.
+ */
+static u32 estimate_sustainable_power(struct thermal_zone_device *tz)
+{
+	u32 sustainable_power = 0;
+	struct thermal_instance *instance;
+	struct power_allocator_params *params = tz->governor_data;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		struct thermal_cooling_device *cdev = instance->cdev;
+		u32 min_power;
+
+		if (instance->trip != params->trip_max_desired_temperature)
+			continue;
+
+		if (!cdev_is_power_actor(cdev))
+			continue;
+
+		if (cdev->ops->state2power(cdev, instance->upper, &min_power))
+			continue;
+
+		sustainable_power += min_power;
+	}
+
+	return sustainable_power;
+}
+
+/**
+ * estimate_pid_constants() - Estimate the constants for the PID controller
+ * @tz:		thermal zone for which to estimate the constants
+ * @sustainable_power:	sustainable power for the thermal zone
+ * @trip_switch_on:	trip point number for the switch on temperature
+ * @control_temp:	target temperature for the power allocator governor
+ *
+ * This function is used to update the estimation of the PID
+ * controller constants in struct thermal_zone_parameters.
+ */
+static void estimate_pid_constants(struct thermal_zone_device *tz,
+				   u32 sustainable_power, int trip_switch_on,
+				   int control_temp)
+{
+	int ret;
+	int switch_on_temp;
+	u32 temperature_threshold;
+	s32 k_i;
+
+	ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp);
+	if (ret)
+		switch_on_temp = 0;
+
+	temperature_threshold = control_temp - switch_on_temp;
+	/*
+	 * estimate_pid_constants() tries to find appropriate default
+	 * values for thermal zones that don't provide them. If a
+	 * system integrator has configured a thermal zone with two
+	 * passive trip points at the same temperature, that person
+	 * hasn't put any effort to set up the thermal zone properly
+	 * so just give up.
+	 */
+	if (!temperature_threshold)
+		return;
+
+	tz->tzp->k_po = int_to_frac(sustainable_power) /
+		temperature_threshold;
+
+	tz->tzp->k_pu = int_to_frac(2 * sustainable_power) /
+		temperature_threshold;
+
+	k_i = tz->tzp->k_pu / 10;
+	tz->tzp->k_i = k_i > 0 ? k_i : 1;
+
+	/*
+	 * The default for k_d and integral_cutoff is 0, so we can
+	 * leave them as they are.
+	 */
+}
+
+/**
+ * get_sustainable_power() - Get the right sustainable power
+ * @tz:		thermal zone for which to estimate the constants
+ * @params:	parameters for the power allocator governor
+ * @control_temp:	target temperature for the power allocator governor
+ *
+ * This function is used for getting the proper sustainable power value based
+ * on variables which might be updated by the user sysfs interface. If that
+ * happen the new value is going to be estimated and updated. It is also used
+ * after thermal zone binding, where the initial values where set to 0.
+ */
+static u32 get_sustainable_power(struct thermal_zone_device *tz,
+				 struct power_allocator_params *params,
+				 int control_temp)
+{
+	u32 sustainable_power;
+
+	if (!tz->tzp->sustainable_power)
+		sustainable_power = estimate_sustainable_power(tz);
+	else
+		sustainable_power = tz->tzp->sustainable_power;
+
+	/* Check if it's init value 0 or there was update via sysfs */
+	if (sustainable_power != params->sustainable_power) {
+		estimate_pid_constants(tz, sustainable_power,
+				       params->trip_switch_on, control_temp);
+
+		/* Do the estimation only once and make available in sysfs */
+		tz->tzp->sustainable_power = sustainable_power;
+		params->sustainable_power = sustainable_power;
+	}
+
+	return sustainable_power;
+}
+
+/**
+ * pid_controller() - PID controller
+ * @tz:	thermal zone we are operating in
+ * @control_temp:	the target temperature in millicelsius
+ * @max_allocatable_power:	maximum allocatable power for this thermal zone
+ *
+ * This PID controller increases the available power budget so that the
+ * temperature of the thermal zone gets as close as possible to
+ * @control_temp and limits the power if it exceeds it.  k_po is the
+ * proportional term when we are overshooting, k_pu is the
+ * proportional term when we are undershooting.  integral_cutoff is a
+ * threshold below which we stop accumulating the error.  The
+ * accumulated error is only valid if the requested power will make
+ * the system warmer.  If the system is mostly idle, there's no point
+ * in accumulating positive error.
+ *
+ * Return: The power budget for the next period.
+ */
+static u32 pid_controller(struct thermal_zone_device *tz,
+			  int control_temp,
+			  u32 max_allocatable_power)
+{
+	s64 p, i, d, power_range;
+	s32 err, max_power_frac;
+	u32 sustainable_power;
+	struct power_allocator_params *params = tz->governor_data;
+
+	max_power_frac = int_to_frac(max_allocatable_power);
+
+	sustainable_power = get_sustainable_power(tz, params, control_temp);
+
+	err = control_temp - tz->temperature;
+	err = int_to_frac(err);
+
+	/* Calculate the proportional term */
+	p = mul_frac(err < 0 ? tz->tzp->k_po : tz->tzp->k_pu, err);
+
+	/*
+	 * Calculate the integral term
+	 *
+	 * if the error is less than cut off allow integration (but
+	 * the integral is limited to max power)
+	 */
+	i = mul_frac(tz->tzp->k_i, params->err_integral);
+
+	if (err < int_to_frac(tz->tzp->integral_cutoff)) {
+		s64 i_next = i + mul_frac(tz->tzp->k_i, err);
+
+		if (abs(i_next) < max_power_frac) {
+			i = i_next;
+			params->err_integral += err;
+		}
+	}
+
+	/*
+	 * Calculate the derivative term
+	 *
+	 * We do err - prev_err, so with a positive k_d, a decreasing
+	 * error (i.e. driving closer to the line) results in less
+	 * power being applied, slowing down the controller)
+	 */
+	d = mul_frac(tz->tzp->k_d, err - params->prev_err);
+	d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
+	params->prev_err = err;
+
+	power_range = p + i + d;
+
+	/* feed-forward the known sustainable dissipatable power */
+	power_range = sustainable_power + frac_to_int(power_range);
+
+	power_range = clamp(power_range, (s64)0, (s64)max_allocatable_power);
+
+	trace_thermal_power_allocator_pid(tz, frac_to_int(err),
+					  frac_to_int(params->err_integral),
+					  frac_to_int(p), frac_to_int(i),
+					  frac_to_int(d), power_range);
+
+	return power_range;
+}
+
+/**
+ * power_actor_set_power() - limit the maximum power a cooling device consumes
+ * @cdev:	pointer to &thermal_cooling_device
+ * @instance:	thermal instance to update
+ * @power:	the power in milliwatts
+ *
+ * Set the cooling device to consume at most @power milliwatts. The limit is
+ * expected to be a cap at the maximum power consumption.
+ *
+ * Return: 0 on success, -EINVAL if the cooling device does not
+ * implement the power actor API or -E* for other failures.
+ */
+static int
+power_actor_set_power(struct thermal_cooling_device *cdev,
+		      struct thermal_instance *instance, u32 power)
+{
+	unsigned long state;
+	int ret;
+
+	ret = cdev->ops->power2state(cdev, power, &state);
+	if (ret)
+		return ret;
+
+	instance->target = clamp_val(state, instance->lower, instance->upper);
+	mutex_lock(&cdev->lock);
+	__thermal_cdev_update(cdev);
+	mutex_unlock(&cdev->lock);
+
+	return 0;
+}
+
+/**
+ * divvy_up_power() - divvy the allocated power between the actors
+ * @req_power:	each actor's requested power
+ * @max_power:	each actor's maximum available power
+ * @num_actors:	size of the @req_power, @max_power and @granted_power's array
+ * @total_req_power: sum of @req_power
+ * @power_range:	total allocated power
+ * @granted_power:	output array: each actor's granted power
+ * @extra_actor_power:	an appropriately sized array to be used in the
+ *			function as temporary storage of the extra power given
+ *			to the actors
+ *
+ * This function divides the total allocated power (@power_range)
+ * fairly between the actors.  It first tries to give each actor a
+ * share of the @power_range according to how much power it requested
+ * compared to the rest of the actors.  For example, if only one actor
+ * requests power, then it receives all the @power_range.  If
+ * three actors each requests 1mW, each receives a third of the
+ * @power_range.
+ *
+ * If any actor received more than their maximum power, then that
+ * surplus is re-divvied among the actors based on how far they are
+ * from their respective maximums.
+ *
+ * Granted power for each actor is written to @granted_power, which
+ * should've been allocated by the calling function.
+ */
+static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors,
+			   u32 total_req_power, u32 power_range,
+			   u32 *granted_power, u32 *extra_actor_power)
+{
+	u32 extra_power, capped_extra_power;
+	int i;
+
+	/*
+	 * Prevent division by 0 if none of the actors request power.
+	 */
+	if (!total_req_power)
+		total_req_power = 1;
+
+	capped_extra_power = 0;
+	extra_power = 0;
+	for (i = 0; i < num_actors; i++) {
+		u64 req_range = (u64)req_power[i] * power_range;
+
+		granted_power[i] = DIV_ROUND_CLOSEST_ULL(req_range,
+							 total_req_power);
+
+		if (granted_power[i] > max_power[i]) {
+			extra_power += granted_power[i] - max_power[i];
+			granted_power[i] = max_power[i];
+		}
+
+		extra_actor_power[i] = max_power[i] - granted_power[i];
+		capped_extra_power += extra_actor_power[i];
+	}
+
+	if (!extra_power)
+		return;
+
+	/*
+	 * Re-divvy the reclaimed extra among actors based on
+	 * how far they are from the max
+	 */
+	extra_power = min(extra_power, capped_extra_power);
+	if (capped_extra_power > 0)
+		for (i = 0; i < num_actors; i++) {
+			u64 extra_range = (u64)extra_actor_power[i] * extra_power;
+			granted_power[i] += DIV_ROUND_CLOSEST_ULL(extra_range,
+							 capped_extra_power);
+		}
+}
+
+static int allocate_power(struct thermal_zone_device *tz,
+			  int control_temp)
+{
+	struct thermal_instance *instance;
+	struct power_allocator_params *params = tz->governor_data;
+	u32 *req_power, *max_power, *granted_power, *extra_actor_power;
+	u32 *weighted_req_power;
+	u32 total_req_power, max_allocatable_power, total_weighted_req_power;
+	u32 total_granted_power, power_range;
+	int i, num_actors, total_weight, ret = 0;
+	int trip_max_desired_temperature = params->trip_max_desired_temperature;
+
+	num_actors = 0;
+	total_weight = 0;
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if ((instance->trip == trip_max_desired_temperature) &&
+		    cdev_is_power_actor(instance->cdev)) {
+			num_actors++;
+			total_weight += instance->weight;
+		}
+	}
+
+	if (!num_actors)
+		return -ENODEV;
+
+	/*
+	 * We need to allocate five arrays of the same size:
+	 * req_power, max_power, granted_power, extra_actor_power and
+	 * weighted_req_power.  They are going to be needed until this
+	 * function returns.  Allocate them all in one go to simplify
+	 * the allocation and deallocation logic.
+	 */
+	BUILD_BUG_ON(sizeof(*req_power) != sizeof(*max_power));
+	BUILD_BUG_ON(sizeof(*req_power) != sizeof(*granted_power));
+	BUILD_BUG_ON(sizeof(*req_power) != sizeof(*extra_actor_power));
+	BUILD_BUG_ON(sizeof(*req_power) != sizeof(*weighted_req_power));
+	req_power = kcalloc(num_actors * 5, sizeof(*req_power), GFP_KERNEL);
+	if (!req_power)
+		return -ENOMEM;
+
+	max_power = &req_power[num_actors];
+	granted_power = &req_power[2 * num_actors];
+	extra_actor_power = &req_power[3 * num_actors];
+	weighted_req_power = &req_power[4 * num_actors];
+
+	i = 0;
+	total_weighted_req_power = 0;
+	total_req_power = 0;
+	max_allocatable_power = 0;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		int weight;
+		struct thermal_cooling_device *cdev = instance->cdev;
+
+		if (instance->trip != trip_max_desired_temperature)
+			continue;
+
+		if (!cdev_is_power_actor(cdev))
+			continue;
+
+		if (cdev->ops->get_requested_power(cdev, &req_power[i]))
+			continue;
+
+		if (!total_weight)
+			weight = 1 << FRAC_BITS;
+		else
+			weight = instance->weight;
+
+		weighted_req_power[i] = frac_to_int(weight * req_power[i]);
+
+		if (cdev->ops->state2power(cdev, instance->lower,
+					   &max_power[i]))
+			continue;
+
+		total_req_power += req_power[i];
+		max_allocatable_power += max_power[i];
+		total_weighted_req_power += weighted_req_power[i];
+
+		i++;
+	}
+
+	power_range = pid_controller(tz, control_temp, max_allocatable_power);
+
+	divvy_up_power(weighted_req_power, max_power, num_actors,
+		       total_weighted_req_power, power_range, granted_power,
+		       extra_actor_power);
+
+	total_granted_power = 0;
+	i = 0;
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip_max_desired_temperature)
+			continue;
+
+		if (!cdev_is_power_actor(instance->cdev))
+			continue;
+
+		power_actor_set_power(instance->cdev, instance,
+				      granted_power[i]);
+		total_granted_power += granted_power[i];
+
+		i++;
+	}
+
+	trace_thermal_power_allocator(tz, req_power, total_req_power,
+				      granted_power, total_granted_power,
+				      num_actors, power_range,
+				      max_allocatable_power, tz->temperature,
+				      control_temp - tz->temperature);
+
+	kfree(req_power);
+
+	return ret;
+}
+
+/**
+ * get_governor_trips() - get the number of the two trip points that are key for this governor
+ * @tz:	thermal zone to operate on
+ * @params:	pointer to private data for this governor
+ *
+ * The power allocator governor works optimally with two trips points:
+ * a "switch on" trip point and a "maximum desired temperature".  These
+ * are defined as the first and last passive trip points.
+ *
+ * If there is only one trip point, then that's considered to be the
+ * "maximum desired temperature" trip point and the governor is always
+ * on.  If there are no passive or active trip points, then the
+ * governor won't do anything.  In fact, its throttle function
+ * won't be called at all.
+ */
+static void get_governor_trips(struct thermal_zone_device *tz,
+			       struct power_allocator_params *params)
+{
+	int i, last_active, last_passive;
+	bool found_first_passive;
+
+	found_first_passive = false;
+	last_active = INVALID_TRIP;
+	last_passive = INVALID_TRIP;
+
+	for (i = 0; i < tz->num_trips; i++) {
+		enum thermal_trip_type type;
+		int ret;
+
+		ret = tz->ops->get_trip_type(tz, i, &type);
+		if (ret) {
+			dev_warn(&tz->device,
+				 "Failed to get trip point %d type: %d\n", i,
+				 ret);
+			continue;
+		}
+
+		if (type == THERMAL_TRIP_PASSIVE) {
+			if (!found_first_passive) {
+				params->trip_switch_on = i;
+				found_first_passive = true;
+			} else  {
+				last_passive = i;
+			}
+		} else if (type == THERMAL_TRIP_ACTIVE) {
+			last_active = i;
+		} else {
+			break;
+		}
+	}
+
+	if (last_passive != INVALID_TRIP) {
+		params->trip_max_desired_temperature = last_passive;
+	} else if (found_first_passive) {
+		params->trip_max_desired_temperature = params->trip_switch_on;
+		params->trip_switch_on = INVALID_TRIP;
+	} else {
+		params->trip_switch_on = INVALID_TRIP;
+		params->trip_max_desired_temperature = last_active;
+	}
+}
+
+static void reset_pid_controller(struct power_allocator_params *params)
+{
+	params->err_integral = 0;
+	params->prev_err = 0;
+}
+
+static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
+{
+	struct thermal_instance *instance;
+	struct power_allocator_params *params = tz->governor_data;
+	u32 req_power;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		struct thermal_cooling_device *cdev = instance->cdev;
+
+		if ((instance->trip != params->trip_max_desired_temperature) ||
+		    (!cdev_is_power_actor(instance->cdev)))
+			continue;
+
+		instance->target = 0;
+		mutex_lock(&instance->cdev->lock);
+		/*
+		 * Call for updating the cooling devices local stats and avoid
+		 * periods of dozen of seconds when those have not been
+		 * maintained.
+		 */
+		cdev->ops->get_requested_power(cdev, &req_power);
+
+		if (update)
+			__thermal_cdev_update(instance->cdev);
+
+		mutex_unlock(&instance->cdev->lock);
+	}
+}
+
+/**
+ * check_power_actors() - Check all cooling devices and warn when they are
+ *			not power actors
+ * @tz:		thermal zone to operate on
+ *
+ * Check all cooling devices in the @tz and warn every time they are missing
+ * power actor API. The warning should help to investigate the issue, which
+ * could be e.g. lack of Energy Model for a given device.
+ *
+ * Return: 0 on success, -EINVAL if any cooling device does not implement
+ * the power actor API.
+ */
+static int check_power_actors(struct thermal_zone_device *tz)
+{
+	struct thermal_instance *instance;
+	int ret = 0;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (!cdev_is_power_actor(instance->cdev)) {
+			dev_warn(&tz->device, "power_allocator: %s is not a power actor\n",
+				 instance->cdev->type);
+			ret = -EINVAL;
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * power_allocator_bind() - bind the power_allocator governor to a thermal zone
+ * @tz:	thermal zone to bind it to
+ *
+ * Initialize the PID controller parameters and bind it to the thermal
+ * zone.
+ *
+ * Return: 0 on success, or -ENOMEM if we ran out of memory, or -EINVAL
+ * when there are unsupported cooling devices in the @tz.
+ */
+static int power_allocator_bind(struct thermal_zone_device *tz)
+{
+	int ret;
+	struct power_allocator_params *params;
+	int control_temp;
+
+	ret = check_power_actors(tz);
+	if (ret)
+		return ret;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	if (!tz->tzp) {
+		tz->tzp = kzalloc(sizeof(*tz->tzp), GFP_KERNEL);
+		if (!tz->tzp) {
+			ret = -ENOMEM;
+			goto free_params;
+		}
+
+		params->allocated_tzp = true;
+	}
+
+	if (!tz->tzp->sustainable_power)
+		dev_warn(&tz->device, "power_allocator: sustainable_power will be estimated\n");
+
+	get_governor_trips(tz, params);
+
+	if (tz->num_trips > 0) {
+		ret = tz->ops->get_trip_temp(tz,
+					params->trip_max_desired_temperature,
+					&control_temp);
+		if (!ret)
+			estimate_pid_constants(tz, tz->tzp->sustainable_power,
+					       params->trip_switch_on,
+					       control_temp);
+	}
+
+	reset_pid_controller(params);
+
+	tz->governor_data = params;
+
+	return 0;
+
+free_params:
+	kfree(params);
+
+	return ret;
+}
+
+static void power_allocator_unbind(struct thermal_zone_device *tz)
+{
+	struct power_allocator_params *params = tz->governor_data;
+
+	dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
+
+	if (params->allocated_tzp) {
+		kfree(tz->tzp);
+		tz->tzp = NULL;
+	}
+
+	kfree(tz->governor_data);
+	tz->governor_data = NULL;
+}
+
+static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
+{
+	int ret;
+	int switch_on_temp, control_temp;
+	struct power_allocator_params *params = tz->governor_data;
+	bool update;
+
+	lockdep_assert_held(&tz->lock);
+
+	/*
+	 * We get called for every trip point but we only need to do
+	 * our calculations once
+	 */
+	if (trip != params->trip_max_desired_temperature)
+		return 0;
+
+	ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
+				     &switch_on_temp);
+	if (!ret && (tz->temperature < switch_on_temp)) {
+		update = (tz->last_temperature >= switch_on_temp);
+		tz->passive = 0;
+		reset_pid_controller(params);
+		allow_maximum_power(tz, update);
+		return 0;
+	}
+
+	tz->passive = 1;
+
+	ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature,
+				&control_temp);
+	if (ret) {
+		dev_warn(&tz->device,
+			 "Failed to get the maximum desired temperature: %d\n",
+			 ret);
+		return ret;
+	}
+
+	return allocate_power(tz, control_temp);
+}
+
+static struct thermal_governor thermal_gov_power_allocator = {
+	.name		= "power_allocator",
+	.bind_to_tz	= power_allocator_bind,
+	.unbind_from_tz	= power_allocator_unbind,
+	.throttle	= power_allocator_throttle,
+};
+THERMAL_GOVERNOR_DECLARE(thermal_gov_power_allocator);
diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
new file mode 100644
index 000000000..cdd3354bc
--- /dev/null
+++ b/drivers/thermal/gov_step_wise.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  step_wise.c - A step-by-step Thermal throttling governor
+ *
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/thermal.h>
+#include <linux/minmax.h>
+#include <trace/events/thermal.h>
+
+#include "thermal_core.h"
+
+/*
+ * If the temperature is higher than a trip point,
+ *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
+ *       state for this trip point
+ *    b. if the trend is THERMAL_TREND_DROPPING, do nothing
+ *    c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
+ *       for this trip point
+ *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
+ *       for this trip point
+ * If the temperature is lower than a trip point,
+ *    a. if the trend is THERMAL_TREND_RAISING, do nothing
+ *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
+ *       state for this trip point, if the cooling state already
+ *       equals lower limit, deactivate the thermal instance
+ *    c. if the trend is THERMAL_TREND_RAISE_FULL, do nothing
+ *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit,
+ *       if the cooling state already equals lower limit,
+ *       deactivate the thermal instance
+ */
+static unsigned long get_target_state(struct thermal_instance *instance,
+				enum thermal_trend trend, bool throttle)
+{
+	struct thermal_cooling_device *cdev = instance->cdev;
+	unsigned long cur_state;
+	unsigned long next_target;
+
+	/*
+	 * We keep this instance the way it is by default.
+	 * Otherwise, we use the current state of the
+	 * cdev in use to determine the next_target.
+	 */
+	cdev->ops->get_cur_state(cdev, &cur_state);
+	next_target = instance->target;
+	dev_dbg(&cdev->device, "cur_state=%ld\n", cur_state);
+
+	if (!instance->initialized) {
+		if (throttle) {
+			next_target = clamp((cur_state + 1), instance->lower, instance->upper);
+		} else {
+			next_target = THERMAL_NO_TARGET;
+		}
+
+		return next_target;
+	}
+
+	switch (trend) {
+	case THERMAL_TREND_RAISING:
+		if (throttle) {
+			next_target = clamp((cur_state + 1), instance->lower, instance->upper);
+		}
+		break;
+	case THERMAL_TREND_DROPPING:
+		if (cur_state <= instance->lower) {
+			if (!throttle)
+				next_target = THERMAL_NO_TARGET;
+		} else {
+			if (!throttle) {
+				next_target = clamp((cur_state - 1), instance->lower, instance->upper);
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	return next_target;
+}
+
+static void update_passive_instance(struct thermal_zone_device *tz,
+				enum thermal_trip_type type, int value)
+{
+	/*
+	 * If value is +1, activate a passive instance.
+	 * If value is -1, deactivate a passive instance.
+	 */
+	if (type == THERMAL_TRIP_PASSIVE)
+		tz->passive += value;
+}
+
+static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
+{
+	int trip_temp;
+	enum thermal_trip_type trip_type;
+	enum thermal_trend trend;
+	struct thermal_instance *instance;
+	bool throttle = false;
+	int old_target;
+
+	tz->ops->get_trip_temp(tz, trip, &trip_temp);
+	tz->ops->get_trip_type(tz, trip, &trip_type);
+
+	trend = get_tz_trend(tz, trip);
+
+	if (tz->temperature >= trip_temp) {
+		throttle = true;
+		trace_thermal_zone_trip(tz, trip, trip_type);
+	}
+
+	dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n",
+				trip, trip_type, trip_temp, trend, throttle);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip)
+			continue;
+
+		old_target = instance->target;
+		instance->target = get_target_state(instance, trend, throttle);
+		dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n",
+					old_target, (int)instance->target);
+
+		if (instance->initialized && old_target == instance->target)
+			continue;
+
+		/* Activate a passive thermal instance */
+		if (old_target == THERMAL_NO_TARGET &&
+			instance->target != THERMAL_NO_TARGET)
+			update_passive_instance(tz, trip_type, 1);
+		/* Deactivate a passive thermal instance */
+		else if (old_target != THERMAL_NO_TARGET &&
+			instance->target == THERMAL_NO_TARGET)
+			update_passive_instance(tz, trip_type, -1);
+
+		instance->initialized = true;
+		mutex_lock(&instance->cdev->lock);
+		instance->cdev->updated = false; /* cdev needs update */
+		mutex_unlock(&instance->cdev->lock);
+	}
+}
+
+/**
+ * step_wise_throttle - throttles devices associated with the given zone
+ * @tz: thermal_zone_device
+ * @trip: trip point index
+ *
+ * Throttling Logic: This uses the trend of the thermal zone to throttle.
+ * If the thermal zone is 'heating up' this throttles all the cooling
+ * devices associated with the zone and its particular trip point, by one
+ * step. If the zone is 'cooling down' it brings back the performance of
+ * the devices by one step.
+ */
+static int step_wise_throttle(struct thermal_zone_device *tz, int trip)
+{
+	struct thermal_instance *instance;
+
+	lockdep_assert_held(&tz->lock);
+
+	thermal_zone_trip_update(tz, trip);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node)
+		thermal_cdev_update(instance->cdev);
+
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_step_wise = {
+	.name		= "step_wise",
+	.throttle	= step_wise_throttle,
+};
+THERMAL_GOVERNOR_DECLARE(thermal_gov_step_wise);
diff --git a/drivers/thermal/gov_user_space.c b/drivers/thermal/gov_user_space.c
new file mode 100644
index 000000000..8bc1c22aa
--- /dev/null
+++ b/drivers/thermal/gov_user_space.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  user_space.c - A simple user space Thermal events notifier
+ *
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+static int user_space_bind(struct thermal_zone_device *tz)
+{
+	pr_info_once("Consider using thermal netlink events interface\n");
+
+	return 0;
+}
+
+/**
+ * notify_user_space - Notifies user space about thermal events
+ * @tz: thermal_zone_device
+ * @trip: trip point index
+ *
+ * This function notifies the user space through UEvents.
+ */
+static int notify_user_space(struct thermal_zone_device *tz, int trip)
+{
+	char *thermal_prop[5];
+	int i;
+
+	lockdep_assert_held(&tz->lock);
+
+	thermal_prop[0] = kasprintf(GFP_KERNEL, "NAME=%s", tz->type);
+	thermal_prop[1] = kasprintf(GFP_KERNEL, "TEMP=%d", tz->temperature);
+	thermal_prop[2] = kasprintf(GFP_KERNEL, "TRIP=%d", trip);
+	thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", tz->notify_event);
+	thermal_prop[4] = NULL;
+	kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, thermal_prop);
+	for (i = 0; i < 4; ++i)
+		kfree(thermal_prop[i]);
+
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_user_space = {
+	.name		= "user_space",
+	.throttle	= notify_user_space,
+	.bind_to_tz	= user_space_bind,
+};
+THERMAL_GOVERNOR_DECLARE(thermal_gov_user_space);
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
new file mode 100644
index 000000000..15af90f5c
--- /dev/null
+++ b/drivers/thermal/hisi_thermal.c
@@ -0,0 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon thermal sensor driver
+ *
+ * Copyright (c) 2014-2015 HiSilicon Limited.
+ * Copyright (c) 2014-2015 Linaro Limited.
+ *
+ * Xinwei Kong <kong.kongxinwei@hisilicon.com>
+ * Leo Yan <leo.yan@linaro.org>
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+
+#include "thermal_core.h"
+
+#define HI6220_TEMP0_LAG			(0x0)
+#define HI6220_TEMP0_TH				(0x4)
+#define HI6220_TEMP0_RST_TH			(0x8)
+#define HI6220_TEMP0_CFG			(0xC)
+#define HI6220_TEMP0_CFG_SS_MSK			(0xF000)
+#define HI6220_TEMP0_CFG_HDAK_MSK		(0x30)
+#define HI6220_TEMP0_EN				(0x10)
+#define HI6220_TEMP0_INT_EN			(0x14)
+#define HI6220_TEMP0_INT_CLR			(0x18)
+#define HI6220_TEMP0_RST_MSK			(0x1C)
+#define HI6220_TEMP0_VALUE			(0x28)
+
+#define HI3660_OFFSET(chan)		((chan) * 0x40)
+#define HI3660_TEMP(chan)		(HI3660_OFFSET(chan) + 0x1C)
+#define HI3660_TH(chan)			(HI3660_OFFSET(chan) + 0x20)
+#define HI3660_LAG(chan)		(HI3660_OFFSET(chan) + 0x28)
+#define HI3660_INT_EN(chan)		(HI3660_OFFSET(chan) + 0x2C)
+#define HI3660_INT_CLR(chan)		(HI3660_OFFSET(chan) + 0x30)
+
+#define HI6220_TEMP_BASE			(-60000)
+#define HI6220_TEMP_RESET			(100000)
+#define HI6220_TEMP_STEP			(785)
+#define HI6220_TEMP_LAG				(3500)
+
+#define HI3660_TEMP_BASE		(-63780)
+#define HI3660_TEMP_STEP		(205)
+#define HI3660_TEMP_LAG			(4000)
+
+#define HI6220_CLUSTER0_SENSOR		2
+#define HI6220_CLUSTER1_SENSOR		1
+
+#define HI3660_LITTLE_SENSOR		0
+#define HI3660_BIG_SENSOR		1
+#define HI3660_G3D_SENSOR		2
+#define HI3660_MODEM_SENSOR		3
+
+struct hisi_thermal_data;
+
+struct hisi_thermal_sensor {
+	struct hisi_thermal_data *data;
+	struct thermal_zone_device *tzd;
+	const char *irq_name;
+	uint32_t id;
+	uint32_t thres_temp;
+};
+
+struct hisi_thermal_ops {
+	int (*get_temp)(struct hisi_thermal_sensor *sensor);
+	int (*enable_sensor)(struct hisi_thermal_sensor *sensor);
+	int (*disable_sensor)(struct hisi_thermal_sensor *sensor);
+	int (*irq_handler)(struct hisi_thermal_sensor *sensor);
+	int (*probe)(struct hisi_thermal_data *data);
+};
+
+struct hisi_thermal_data {
+	const struct hisi_thermal_ops *ops;
+	struct hisi_thermal_sensor *sensor;
+	struct platform_device *pdev;
+	struct clk *clk;
+	void __iomem *regs;
+	int nr_sensors;
+};
+
+/*
+ * The temperature computation on the tsensor is as follow:
+ *	Unit: millidegree Celsius
+ *	Step: 200/255 (0.7843)
+ *	Temperature base: -60°C
+ *
+ * The register is programmed in temperature steps, every step is 785
+ * millidegree and begins at -60 000 m°C
+ *
+ * The temperature from the steps:
+ *
+ *	Temp = TempBase + (steps x 785)
+ *
+ * and the steps from the temperature:
+ *
+ *	steps = (Temp - TempBase) / 785
+ *
+ */
+static inline int hi6220_thermal_step_to_temp(int step)
+{
+	return HI6220_TEMP_BASE + (step * HI6220_TEMP_STEP);
+}
+
+static inline int hi6220_thermal_temp_to_step(int temp)
+{
+	return DIV_ROUND_UP(temp - HI6220_TEMP_BASE, HI6220_TEMP_STEP);
+}
+
+/*
+ * for Hi3660,
+ *	Step: 189/922 (0.205)
+ *	Temperature base: -63.780°C
+ *
+ * The register is programmed in temperature steps, every step is 205
+ * millidegree and begins at -63 780 m°C
+ */
+static inline int hi3660_thermal_step_to_temp(int step)
+{
+	return HI3660_TEMP_BASE + step * HI3660_TEMP_STEP;
+}
+
+static inline int hi3660_thermal_temp_to_step(int temp)
+{
+	return DIV_ROUND_UP(temp - HI3660_TEMP_BASE, HI3660_TEMP_STEP);
+}
+
+/*
+ * The lag register contains 5 bits encoding the temperature in steps.
+ *
+ * Each time the temperature crosses the threshold boundary, an
+ * interrupt is raised. It could be when the temperature is going
+ * above the threshold or below. However, if the temperature is
+ * fluctuating around this value due to the load, we can receive
+ * several interrupts which may not desired.
+ *
+ * We can setup a temperature representing the delta between the
+ * threshold and the current temperature when the temperature is
+ * decreasing.
+ *
+ * For instance: the lag register is 5°C, the threshold is 65°C, when
+ * the temperature reaches 65°C an interrupt is raised and when the
+ * temperature decrease to 65°C - 5°C another interrupt is raised.
+ *
+ * A very short lag can lead to an interrupt storm, a long lag
+ * increase the latency to react to the temperature changes.  In our
+ * case, that is not really a problem as we are polling the
+ * temperature.
+ *
+ * [0:4] : lag register
+ *
+ * The temperature is coded in steps, cf. HI6220_TEMP_STEP.
+ *
+ * Min : 0x00 :  0.0 °C
+ * Max : 0x1F : 24.3 °C
+ *
+ * The 'value' parameter is in milliCelsius.
+ */
+static inline void hi6220_thermal_set_lag(void __iomem *addr, int value)
+{
+	writel(DIV_ROUND_UP(value, HI6220_TEMP_STEP) & 0x1F,
+			addr + HI6220_TEMP0_LAG);
+}
+
+static inline void hi6220_thermal_alarm_clear(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_INT_CLR);
+}
+
+static inline void hi6220_thermal_alarm_enable(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_INT_EN);
+}
+
+static inline void hi6220_thermal_alarm_set(void __iomem *addr, int temp)
+{
+	writel(hi6220_thermal_temp_to_step(temp) | 0x0FFFFFF00,
+	       addr + HI6220_TEMP0_TH);
+}
+
+static inline void hi6220_thermal_reset_set(void __iomem *addr, int temp)
+{
+	writel(hi6220_thermal_temp_to_step(temp), addr + HI6220_TEMP0_RST_TH);
+}
+
+static inline void hi6220_thermal_reset_enable(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_RST_MSK);
+}
+
+static inline void hi6220_thermal_enable(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_EN);
+}
+
+static inline int hi6220_thermal_get_temperature(void __iomem *addr)
+{
+	return hi6220_thermal_step_to_temp(readl(addr + HI6220_TEMP0_VALUE));
+}
+
+/*
+ * [0:6] lag register
+ *
+ * The temperature is coded in steps, cf. HI3660_TEMP_STEP.
+ *
+ * Min : 0x00 :  0.0 °C
+ * Max : 0x7F : 26.0 °C
+ *
+ */
+static inline void hi3660_thermal_set_lag(void __iomem *addr,
+					  int id, int value)
+{
+	writel(DIV_ROUND_UP(value, HI3660_TEMP_STEP) & 0x7F,
+			addr + HI3660_LAG(id));
+}
+
+static inline void hi3660_thermal_alarm_clear(void __iomem *addr,
+					      int id, int value)
+{
+	writel(value, addr + HI3660_INT_CLR(id));
+}
+
+static inline void hi3660_thermal_alarm_enable(void __iomem *addr,
+					       int id, int value)
+{
+	writel(value, addr + HI3660_INT_EN(id));
+}
+
+static inline void hi3660_thermal_alarm_set(void __iomem *addr,
+					    int id, int value)
+{
+	writel(value, addr + HI3660_TH(id));
+}
+
+static inline int hi3660_thermal_get_temperature(void __iomem *addr, int id)
+{
+	return hi3660_thermal_step_to_temp(readl(addr + HI3660_TEMP(id)));
+}
+
+/*
+ * Temperature configuration register - Sensor selection
+ *
+ * Bits [19:12]
+ *
+ * 0x0: local sensor (default)
+ * 0x1: remote sensor 1 (ACPU cluster 1)
+ * 0x2: remote sensor 2 (ACPU cluster 0)
+ * 0x3: remote sensor 3 (G3D)
+ */
+static inline void hi6220_thermal_sensor_select(void __iomem *addr, int sensor)
+{
+	writel((readl(addr + HI6220_TEMP0_CFG) & ~HI6220_TEMP0_CFG_SS_MSK) |
+	       (sensor << 12), addr + HI6220_TEMP0_CFG);
+}
+
+/*
+ * Temperature configuration register - Hdak conversion polling interval
+ *
+ * Bits [5:4]
+ *
+ * 0x0 :   0.768 ms
+ * 0x1 :   6.144 ms
+ * 0x2 :  49.152 ms
+ * 0x3 : 393.216 ms
+ */
+static inline void hi6220_thermal_hdak_set(void __iomem *addr, int value)
+{
+	writel((readl(addr + HI6220_TEMP0_CFG) & ~HI6220_TEMP0_CFG_HDAK_MSK) |
+	       (value << 4), addr + HI6220_TEMP0_CFG);
+}
+
+static int hi6220_thermal_irq_handler(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+
+	hi6220_thermal_alarm_clear(data->regs, 1);
+	return 0;
+}
+
+static int hi3660_thermal_irq_handler(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+
+	hi3660_thermal_alarm_clear(data->regs, sensor->id, 1);
+	return 0;
+}
+
+static int hi6220_thermal_get_temp(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+
+	return hi6220_thermal_get_temperature(data->regs);
+}
+
+static int hi3660_thermal_get_temp(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+
+	return hi3660_thermal_get_temperature(data->regs, sensor->id);
+}
+
+static int hi6220_thermal_disable_sensor(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+
+	/* disable sensor module */
+	hi6220_thermal_enable(data->regs, 0);
+	hi6220_thermal_alarm_enable(data->regs, 0);
+	hi6220_thermal_reset_enable(data->regs, 0);
+
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int hi3660_thermal_disable_sensor(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+
+	/* disable sensor module */
+	hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
+	return 0;
+}
+
+static int hi6220_thermal_enable_sensor(struct hisi_thermal_sensor *sensor)
+{
+	struct hisi_thermal_data *data = sensor->data;
+	int ret;
+
+	/* enable clock for tsensor */
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	/* disable module firstly */
+	hi6220_thermal_reset_enable(data->regs, 0);
+	hi6220_thermal_enable(data->regs, 0);
+
+	/* select sensor id */
+	hi6220_thermal_sensor_select(data->regs, sensor->id);
+
+	/* setting the hdak time */
+	hi6220_thermal_hdak_set(data->regs, 0);
+
+	/* setting lag value between current temp and the threshold */
+	hi6220_thermal_set_lag(data->regs, HI6220_TEMP_LAG);
+
+	/* enable for interrupt */
+	hi6220_thermal_alarm_set(data->regs, sensor->thres_temp);
+
+	hi6220_thermal_reset_set(data->regs, HI6220_TEMP_RESET);
+
+	/* enable module */
+	hi6220_thermal_reset_enable(data->regs, 1);
+	hi6220_thermal_enable(data->regs, 1);
+
+	hi6220_thermal_alarm_clear(data->regs, 0);
+	hi6220_thermal_alarm_enable(data->regs, 1);
+
+	return 0;
+}
+
+static int hi3660_thermal_enable_sensor(struct hisi_thermal_sensor *sensor)
+{
+	unsigned int value;
+	struct hisi_thermal_data *data = sensor->data;
+
+	/* disable interrupt */
+	hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
+
+	/* setting lag value between current temp and the threshold */
+	hi3660_thermal_set_lag(data->regs, sensor->id, HI3660_TEMP_LAG);
+
+	/* set interrupt threshold */
+	value = hi3660_thermal_temp_to_step(sensor->thres_temp);
+	hi3660_thermal_alarm_set(data->regs, sensor->id, value);
+
+	/* enable interrupt */
+	hi3660_thermal_alarm_clear(data->regs, sensor->id, 1);
+	hi3660_thermal_alarm_enable(data->regs, sensor->id, 1);
+
+	return 0;
+}
+
+static int hi6220_thermal_probe(struct hisi_thermal_data *data)
+{
+	struct platform_device *pdev = data->pdev;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	data->clk = devm_clk_get(dev, "thermal_clk");
+	if (IS_ERR(data->clk)) {
+		ret = PTR_ERR(data->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get thermal clk: %d\n", ret);
+		return ret;
+	}
+
+	data->sensor = devm_kzalloc(dev, sizeof(*data->sensor), GFP_KERNEL);
+	if (!data->sensor)
+		return -ENOMEM;
+
+	data->sensor[0].id = HI6220_CLUSTER0_SENSOR;
+	data->sensor[0].irq_name = "tsensor_intr";
+	data->sensor[0].data = data;
+	data->nr_sensors = 1;
+
+	return 0;
+}
+
+static int hi3660_thermal_probe(struct hisi_thermal_data *data)
+{
+	struct platform_device *pdev = data->pdev;
+	struct device *dev = &pdev->dev;
+
+	data->nr_sensors = 1;
+
+	data->sensor = devm_kzalloc(dev, sizeof(*data->sensor) *
+				    data->nr_sensors, GFP_KERNEL);
+	if (!data->sensor)
+		return -ENOMEM;
+
+	data->sensor[0].id = HI3660_BIG_SENSOR;
+	data->sensor[0].irq_name = "tsensor_a73";
+	data->sensor[0].data = data;
+
+	return 0;
+}
+
+static int hisi_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct hisi_thermal_sensor *sensor = tz->devdata;
+	struct hisi_thermal_data *data = sensor->data;
+
+	*temp = data->ops->get_temp(sensor);
+
+	dev_dbg(&data->pdev->dev, "tzd=%p, id=%d, temp=%d, thres=%d\n",
+		sensor->tzd, sensor->id, *temp, sensor->thres_temp);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops hisi_of_thermal_ops = {
+	.get_temp = hisi_thermal_get_temp,
+};
+
+static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
+{
+	struct hisi_thermal_sensor *sensor = dev;
+	struct hisi_thermal_data *data = sensor->data;
+	int temp = 0;
+
+	data->ops->irq_handler(sensor);
+
+	temp = data->ops->get_temp(sensor);
+
+	if (temp >= sensor->thres_temp) {
+		dev_crit(&data->pdev->dev,
+			 "sensor <%d> THERMAL ALARM: %d > %d\n",
+			 sensor->id, temp, sensor->thres_temp);
+
+		thermal_zone_device_update(sensor->tzd,
+					   THERMAL_EVENT_UNSPECIFIED);
+
+	} else {
+		dev_crit(&data->pdev->dev,
+			 "sensor <%d> THERMAL ALARM stopped: %d < %d\n",
+			 sensor->id, temp, sensor->thres_temp);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int hisi_thermal_register_sensor(struct platform_device *pdev,
+					struct hisi_thermal_sensor *sensor)
+{
+	int ret, i;
+	const struct thermal_trip *trip;
+
+	sensor->tzd = devm_thermal_of_zone_register(&pdev->dev,
+						    sensor->id, sensor,
+						    &hisi_of_thermal_ops);
+	if (IS_ERR(sensor->tzd)) {
+		ret = PTR_ERR(sensor->tzd);
+		sensor->tzd = NULL;
+		dev_err(&pdev->dev, "failed to register sensor id %d: %d\n",
+			sensor->id, ret);
+		return ret;
+	}
+
+	trip = of_thermal_get_trip_points(sensor->tzd);
+
+	for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) {
+		if (trip[i].type == THERMAL_TRIP_PASSIVE) {
+			sensor->thres_temp = trip[i].temperature;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static const struct hisi_thermal_ops hi6220_ops = {
+	.get_temp	= hi6220_thermal_get_temp,
+	.enable_sensor	= hi6220_thermal_enable_sensor,
+	.disable_sensor	= hi6220_thermal_disable_sensor,
+	.irq_handler	= hi6220_thermal_irq_handler,
+	.probe		= hi6220_thermal_probe,
+};
+
+static const struct hisi_thermal_ops hi3660_ops = {
+	.get_temp	= hi3660_thermal_get_temp,
+	.enable_sensor	= hi3660_thermal_enable_sensor,
+	.disable_sensor	= hi3660_thermal_disable_sensor,
+	.irq_handler	= hi3660_thermal_irq_handler,
+	.probe		= hi3660_thermal_probe,
+};
+
+static const struct of_device_id of_hisi_thermal_match[] = {
+	{
+		.compatible = "hisilicon,tsensor",
+		.data = &hi6220_ops,
+	},
+	{
+		.compatible = "hisilicon,hi3660-tsensor",
+		.data = &hi3660_ops,
+	},
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
+
+static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
+				       bool on)
+{
+	struct thermal_zone_device *tzd = sensor->tzd;
+
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
+}
+
+static int hisi_thermal_probe(struct platform_device *pdev)
+{
+	struct hisi_thermal_data *data;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int i, ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->pdev = pdev;
+	platform_set_drvdata(pdev, data);
+	data->ops = of_device_get_match_data(dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(data->regs))
+		return PTR_ERR(data->regs);
+
+	ret = data->ops->probe(data);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < data->nr_sensors; i++) {
+		struct hisi_thermal_sensor *sensor = &data->sensor[i];
+
+		ret = hisi_thermal_register_sensor(pdev, sensor);
+		if (ret) {
+			dev_err(dev, "failed to register thermal sensor: %d\n",
+				ret);
+			return ret;
+		}
+
+		ret = platform_get_irq(pdev, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = devm_request_threaded_irq(dev, ret, NULL,
+						hisi_thermal_alarm_irq_thread,
+						IRQF_ONESHOT, sensor->irq_name,
+						sensor);
+		if (ret < 0) {
+			dev_err(dev, "Failed to request alarm irq: %d\n", ret);
+			return ret;
+		}
+
+		ret = data->ops->enable_sensor(sensor);
+		if (ret) {
+			dev_err(dev, "Failed to setup the sensor: %d\n", ret);
+			return ret;
+		}
+
+		hisi_thermal_toggle_sensor(sensor, true);
+	}
+
+	return 0;
+}
+
+static int hisi_thermal_remove(struct platform_device *pdev)
+{
+	struct hisi_thermal_data *data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < data->nr_sensors; i++) {
+		struct hisi_thermal_sensor *sensor = &data->sensor[i];
+
+		hisi_thermal_toggle_sensor(sensor, false);
+		data->ops->disable_sensor(sensor);
+	}
+
+	return 0;
+}
+
+static int hisi_thermal_suspend(struct device *dev)
+{
+	struct hisi_thermal_data *data = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < data->nr_sensors; i++)
+		data->ops->disable_sensor(&data->sensor[i]);
+
+	return 0;
+}
+
+static int hisi_thermal_resume(struct device *dev)
+{
+	struct hisi_thermal_data *data = dev_get_drvdata(dev);
+	int i, ret = 0;
+
+	for (i = 0; i < data->nr_sensors; i++)
+		ret |= data->ops->enable_sensor(&data->sensor[i]);
+
+	return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(hisi_thermal_pm_ops,
+			 hisi_thermal_suspend, hisi_thermal_resume);
+
+static struct platform_driver hisi_thermal_driver = {
+	.driver = {
+		.name		= "hisi_thermal",
+		.pm		= pm_sleep_ptr(&hisi_thermal_pm_ops),
+		.of_match_table = of_hisi_thermal_match,
+	},
+	.probe	= hisi_thermal_probe,
+	.remove	= hisi_thermal_remove,
+};
+
+module_platform_driver(hisi_thermal_driver);
+
+MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei@hisilicon.com>");
+MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
+MODULE_DESCRIPTION("HiSilicon thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
new file mode 100644
index 000000000..258d988b2
--- /dev/null
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 NXP.
+ *
+ * Author: Anson Huang <Anson.Huang@nxp.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define TER			0x0	/* TMU enable */
+#define TPS			0x4
+#define TRITSR			0x20	/* TMU immediate temp */
+
+#define TER_ADC_PD		BIT(30)
+#define TER_EN			BIT(31)
+#define TRITSR_TEMP0_VAL_MASK	0xff
+#define TRITSR_TEMP1_VAL_MASK	0xff0000
+
+#define PROBE_SEL_ALL		GENMASK(31, 30)
+
+#define probe_status_offset(x)	(30 + x)
+#define SIGN_BIT		BIT(7)
+#define TEMP_VAL_MASK		GENMASK(6, 0)
+
+#define VER1_TEMP_LOW_LIMIT	10000
+#define VER2_TEMP_LOW_LIMIT	-40000
+#define VER2_TEMP_HIGH_LIMIT	125000
+
+#define TMU_VER1		0x1
+#define TMU_VER2		0x2
+
+struct thermal_soc_data {
+	u32 num_sensors;
+	u32 version;
+	int (*get_temp)(void *, int *);
+};
+
+struct tmu_sensor {
+	struct imx8mm_tmu *priv;
+	u32 hw_id;
+	struct thermal_zone_device *tzd;
+};
+
+struct imx8mm_tmu {
+	void __iomem *base;
+	struct clk *clk;
+	const struct thermal_soc_data *socdata;
+	struct tmu_sensor sensors[];
+};
+
+static int imx8mm_tmu_get_temp(void *data, int *temp)
+{
+	struct tmu_sensor *sensor = data;
+	struct imx8mm_tmu *tmu = sensor->priv;
+	u32 val;
+
+	val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
+
+	/*
+	 * Do not validate against the V bit (bit 31) due to errata
+	 * ERR051272: TMU: Bit 31 of registers TMU_TSCR/TMU_TRITSR/TMU_TRATSR invalid
+	 */
+
+	*temp = val * 1000;
+	if (*temp < VER1_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int imx8mp_tmu_get_temp(void *data, int *temp)
+{
+	struct tmu_sensor *sensor = data;
+	struct imx8mm_tmu *tmu = sensor->priv;
+	unsigned long val;
+	bool ready;
+
+	val = readl_relaxed(tmu->base + TRITSR);
+	ready = test_bit(probe_status_offset(sensor->hw_id), &val);
+	if (!ready)
+		return -EAGAIN;
+
+	val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
+	      FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
+	if (val & SIGN_BIT) /* negative */
+		val = (~(val & TEMP_VAL_MASK) + 1);
+
+	*temp = val * 1000;
+	if (*temp < VER2_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct tmu_sensor *sensor = tz->devdata;
+	struct imx8mm_tmu *tmu = sensor->priv;
+
+	return tmu->socdata->get_temp(sensor, temp);
+}
+
+static const struct thermal_zone_device_ops tmu_tz_ops = {
+	.get_temp = tmu_get_temp,
+};
+
+static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(tmu->base + TER);
+	val = enable ? (val | TER_EN) : (val & ~TER_EN);
+	if (tmu->socdata->version == TMU_VER2)
+		val = enable ? (val & ~TER_ADC_PD) : (val | TER_ADC_PD);
+	writel_relaxed(val, tmu->base + TER);
+}
+
+static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu)
+{
+	u32 val;
+
+	val = readl_relaxed(tmu->base + TPS);
+	val |= PROBE_SEL_ALL;
+	writel_relaxed(val, tmu->base + TPS);
+}
+
+static int imx8mm_tmu_probe(struct platform_device *pdev)
+{
+	const struct thermal_soc_data *data;
+	struct imx8mm_tmu *tmu;
+	int ret;
+	int i;
+
+	data = of_device_get_match_data(&pdev->dev);
+
+	tmu = devm_kzalloc(&pdev->dev, struct_size(tmu, sensors,
+			   data->num_sensors), GFP_KERNEL);
+	if (!tmu)
+		return -ENOMEM;
+
+	tmu->socdata = data;
+
+	tmu->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tmu->base))
+		return PTR_ERR(tmu->base);
+
+	tmu->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tmu->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(tmu->clk),
+				     "failed to get tmu clock\n");
+
+	ret = clk_prepare_enable(tmu->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret);
+		return ret;
+	}
+
+	/* disable the monitor during initialization */
+	imx8mm_tmu_enable(tmu, false);
+
+	for (i = 0; i < data->num_sensors; i++) {
+		tmu->sensors[i].priv = tmu;
+		tmu->sensors[i].tzd =
+			devm_thermal_of_zone_register(&pdev->dev, i,
+						      &tmu->sensors[i],
+						      &tmu_tz_ops);
+		if (IS_ERR(tmu->sensors[i].tzd)) {
+			ret = PTR_ERR(tmu->sensors[i].tzd);
+			dev_err(&pdev->dev,
+				"failed to register thermal zone sensor[%d]: %d\n",
+				i, ret);
+			goto disable_clk;
+		}
+		tmu->sensors[i].hw_id = i;
+	}
+
+	platform_set_drvdata(pdev, tmu);
+
+	/* enable all the probes for V2 TMU */
+	if (tmu->socdata->version == TMU_VER2)
+		imx8mm_tmu_probe_sel_all(tmu);
+
+	/* enable the monitor */
+	imx8mm_tmu_enable(tmu, true);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(tmu->clk);
+	return ret;
+}
+
+static int imx8mm_tmu_remove(struct platform_device *pdev)
+{
+	struct imx8mm_tmu *tmu = platform_get_drvdata(pdev);
+
+	/* disable TMU */
+	imx8mm_tmu_enable(tmu, false);
+
+	clk_disable_unprepare(tmu->clk);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct thermal_soc_data imx8mm_tmu_data = {
+	.num_sensors = 1,
+	.version = TMU_VER1,
+	.get_temp = imx8mm_tmu_get_temp,
+};
+
+static struct thermal_soc_data imx8mp_tmu_data = {
+	.num_sensors = 2,
+	.version = TMU_VER2,
+	.get_temp = imx8mp_tmu_get_temp,
+};
+
+static const struct of_device_id imx8mm_tmu_table[] = {
+	{ .compatible = "fsl,imx8mm-tmu", .data = &imx8mm_tmu_data, },
+	{ .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8mm_tmu_table);
+
+static struct platform_driver imx8mm_tmu = {
+	.driver = {
+		.name	= "i.mx8mm_thermal",
+		.of_match_table = imx8mm_tmu_table,
+	},
+	.probe = imx8mm_tmu_probe,
+	.remove = imx8mm_tmu_remove,
+};
+module_platform_driver(imx8mm_tmu);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
new file mode 100644
index 000000000..dfadb0358
--- /dev/null
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP.
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/err.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+#include "thermal_hwmon.h"
+
+#define IMX_SC_MISC_FUNC_GET_TEMP	13
+
+static struct imx_sc_ipc *thermal_ipc_handle;
+
+struct imx_sc_sensor {
+	struct thermal_zone_device *tzd;
+	u32 resource_id;
+};
+
+struct req_get_temp {
+	u16 resource_id;
+	u8 type;
+} __packed __aligned(4);
+
+struct resp_get_temp {
+	s16 celsius;
+	s8 tenths;
+} __packed __aligned(4);
+
+struct imx_sc_msg_misc_get_temp {
+	struct imx_sc_rpc_msg hdr;
+	union {
+		struct req_get_temp req;
+		struct resp_get_temp resp;
+	} data;
+} __packed __aligned(4);
+
+static int imx_sc_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct imx_sc_msg_misc_get_temp msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	struct imx_sc_sensor *sensor = tz->devdata;
+	int ret;
+
+	msg.data.req.resource_id = sensor->resource_id;
+	msg.data.req.type = IMX_SC_C_TEMP;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
+	hdr->size = 2;
+
+	ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
+	if (ret) {
+		dev_err(&sensor->tzd->device, "read temp sensor %d failed, ret %d\n",
+			sensor->resource_id, ret);
+		return ret;
+	}
+
+	*temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops imx_sc_thermal_ops = {
+	.get_temp = imx_sc_thermal_get_temp,
+};
+
+static int imx_sc_thermal_probe(struct platform_device *pdev)
+{
+	struct imx_sc_sensor *sensor;
+	const int *resource_id;
+	int i, ret;
+
+	ret = imx_scu_get_handle(&thermal_ipc_handle);
+	if (ret)
+		return ret;
+
+	resource_id = of_device_get_match_data(&pdev->dev);
+	if (!resource_id)
+		return -EINVAL;
+
+	for (i = 0; resource_id[i] >= 0; i++) {
+
+		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+		if (!sensor)
+			return -ENOMEM;
+
+		sensor->resource_id = resource_id[i];
+
+		sensor->tzd = devm_thermal_of_zone_register(&pdev->dev, sensor->resource_id,
+							    sensor, &imx_sc_thermal_ops);
+		if (IS_ERR(sensor->tzd)) {
+			/*
+			 * Save the error value before freeing the
+			 * sensor pointer, otherwise we endup with a
+			 * use-after-free error
+			 */
+			ret = PTR_ERR(sensor->tzd);
+
+			devm_kfree(&pdev->dev, sensor);
+
+			/*
+			 * The thermal framework notifies us there is
+			 * no thermal zone description for such a
+			 * sensor id
+			 */
+			if (ret == -ENODEV)
+				continue;
+
+			dev_err(&pdev->dev, "failed to register thermal zone\n");
+			return ret;
+		}
+
+		if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
+			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
+	}
+
+	return 0;
+}
+
+static const int imx_sc_sensors[] = { IMX_SC_R_SYSTEM, IMX_SC_R_PMIC_0, -1 };
+
+static const struct of_device_id imx_sc_thermal_table[] = {
+	{ .compatible = "fsl,imx-sc-thermal", .data =  imx_sc_sensors },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
+
+static struct platform_driver imx_sc_thermal_driver = {
+		.probe = imx_sc_thermal_probe,
+		.driver = {
+			.name = "imx-sc-thermal",
+			.of_match_table = imx_sc_thermal_table,
+		},
+};
+module_platform_driver(imx_sc_thermal_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("Thermal driver for NXP i.MX SoCs with system controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
new file mode 100644
index 000000000..16663373b
--- /dev/null
+++ b/drivers/thermal/imx_thermal.c
@@ -0,0 +1,936 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/pm_runtime.h>
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+#define REG_TOG		0xc
+
+/* i.MX6 specific */
+#define IMX6_MISC0				0x0150
+#define IMX6_MISC0_REFTOP_SELBIASOFF		(1 << 3)
+#define IMX6_MISC1				0x0160
+#define IMX6_MISC1_IRQ_TEMPHIGH			(1 << 29)
+/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */
+#define IMX6_MISC1_IRQ_TEMPLOW			(1 << 28)
+#define IMX6_MISC1_IRQ_TEMPPANIC		(1 << 27)
+
+#define IMX6_TEMPSENSE0				0x0180
+#define IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT	20
+#define IMX6_TEMPSENSE0_ALARM_VALUE_MASK	(0xfff << 20)
+#define IMX6_TEMPSENSE0_TEMP_CNT_SHIFT		8
+#define IMX6_TEMPSENSE0_TEMP_CNT_MASK		(0xfff << 8)
+#define IMX6_TEMPSENSE0_FINISHED		(1 << 2)
+#define IMX6_TEMPSENSE0_MEASURE_TEMP		(1 << 1)
+#define IMX6_TEMPSENSE0_POWER_DOWN		(1 << 0)
+
+#define IMX6_TEMPSENSE1				0x0190
+#define IMX6_TEMPSENSE1_MEASURE_FREQ		0xffff
+#define IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT	0
+
+#define OCOTP_MEM0			0x0480
+#define OCOTP_ANA1			0x04e0
+
+/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
+#define IMX6_TEMPSENSE2				0x0290
+#define IMX6_TEMPSENSE2_LOW_VALUE_SHIFT		0
+#define IMX6_TEMPSENSE2_LOW_VALUE_MASK		0xfff
+#define IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT	16
+#define IMX6_TEMPSENSE2_PANIC_VALUE_MASK	0xfff0000
+
+/* i.MX7 specific */
+#define IMX7_ANADIG_DIGPROG			0x800
+#define IMX7_TEMPSENSE0				0x300
+#define IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT	18
+#define IMX7_TEMPSENSE0_PANIC_ALARM_MASK	(0x1ff << 18)
+#define IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT	9
+#define IMX7_TEMPSENSE0_HIGH_ALARM_MASK		(0x1ff << 9)
+#define IMX7_TEMPSENSE0_LOW_ALARM_SHIFT		0
+#define IMX7_TEMPSENSE0_LOW_ALARM_MASK		0x1ff
+
+#define IMX7_TEMPSENSE1				0x310
+#define IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT	16
+#define IMX7_TEMPSENSE1_MEASURE_FREQ_MASK	(0xffff << 16)
+#define IMX7_TEMPSENSE1_FINISHED		(1 << 11)
+#define IMX7_TEMPSENSE1_MEASURE_TEMP		(1 << 10)
+#define IMX7_TEMPSENSE1_POWER_DOWN		(1 << 9)
+#define IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT	0
+#define IMX7_TEMPSENSE1_TEMP_VALUE_MASK		0x1ff
+
+/* The driver supports 1 passive trip point and 1 critical trip point */
+enum imx_thermal_trip {
+	IMX_TRIP_PASSIVE,
+	IMX_TRIP_CRITICAL,
+	IMX_TRIP_NUM,
+};
+
+#define IMX_POLLING_DELAY		2000 /* millisecond */
+#define IMX_PASSIVE_DELAY		1000
+
+#define TEMPMON_IMX6Q			1
+#define TEMPMON_IMX6SX			2
+#define TEMPMON_IMX7D			3
+
+struct thermal_soc_data {
+	u32 version;
+
+	u32 sensor_ctrl;
+	u32 power_down_mask;
+	u32 measure_temp_mask;
+
+	u32 measure_freq_ctrl;
+	u32 measure_freq_mask;
+	u32 measure_freq_shift;
+
+	u32 temp_data;
+	u32 temp_value_mask;
+	u32 temp_value_shift;
+	u32 temp_valid_mask;
+
+	u32 panic_alarm_ctrl;
+	u32 panic_alarm_mask;
+	u32 panic_alarm_shift;
+
+	u32 high_alarm_ctrl;
+	u32 high_alarm_mask;
+	u32 high_alarm_shift;
+
+	u32 low_alarm_ctrl;
+	u32 low_alarm_mask;
+	u32 low_alarm_shift;
+};
+
+static struct thermal_soc_data thermal_imx6q_data = {
+	.version = TEMPMON_IMX6Q,
+
+	.sensor_ctrl = IMX6_TEMPSENSE0,
+	.power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN,
+	.measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP,
+
+	.measure_freq_ctrl = IMX6_TEMPSENSE1,
+	.measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT,
+	.measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ,
+
+	.temp_data = IMX6_TEMPSENSE0,
+	.temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK,
+	.temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT,
+	.temp_valid_mask = IMX6_TEMPSENSE0_FINISHED,
+
+	.high_alarm_ctrl = IMX6_TEMPSENSE0,
+	.high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK,
+	.high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT,
+};
+
+static struct thermal_soc_data thermal_imx6sx_data = {
+	.version = TEMPMON_IMX6SX,
+
+	.sensor_ctrl = IMX6_TEMPSENSE0,
+	.power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN,
+	.measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP,
+
+	.measure_freq_ctrl = IMX6_TEMPSENSE1,
+	.measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT,
+	.measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ,
+
+	.temp_data = IMX6_TEMPSENSE0,
+	.temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK,
+	.temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT,
+	.temp_valid_mask = IMX6_TEMPSENSE0_FINISHED,
+
+	.high_alarm_ctrl = IMX6_TEMPSENSE0,
+	.high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK,
+	.high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT,
+
+	.panic_alarm_ctrl = IMX6_TEMPSENSE2,
+	.panic_alarm_mask = IMX6_TEMPSENSE2_PANIC_VALUE_MASK,
+	.panic_alarm_shift = IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT,
+
+	.low_alarm_ctrl = IMX6_TEMPSENSE2,
+	.low_alarm_mask = IMX6_TEMPSENSE2_LOW_VALUE_MASK,
+	.low_alarm_shift = IMX6_TEMPSENSE2_LOW_VALUE_SHIFT,
+};
+
+static struct thermal_soc_data thermal_imx7d_data = {
+	.version = TEMPMON_IMX7D,
+
+	.sensor_ctrl = IMX7_TEMPSENSE1,
+	.power_down_mask = IMX7_TEMPSENSE1_POWER_DOWN,
+	.measure_temp_mask = IMX7_TEMPSENSE1_MEASURE_TEMP,
+
+	.measure_freq_ctrl = IMX7_TEMPSENSE1,
+	.measure_freq_shift = IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT,
+	.measure_freq_mask = IMX7_TEMPSENSE1_MEASURE_FREQ_MASK,
+
+	.temp_data = IMX7_TEMPSENSE1,
+	.temp_value_mask = IMX7_TEMPSENSE1_TEMP_VALUE_MASK,
+	.temp_value_shift = IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT,
+	.temp_valid_mask = IMX7_TEMPSENSE1_FINISHED,
+
+	.panic_alarm_ctrl = IMX7_TEMPSENSE1,
+	.panic_alarm_mask = IMX7_TEMPSENSE0_PANIC_ALARM_MASK,
+	.panic_alarm_shift = IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT,
+
+	.high_alarm_ctrl = IMX7_TEMPSENSE0,
+	.high_alarm_mask = IMX7_TEMPSENSE0_HIGH_ALARM_MASK,
+	.high_alarm_shift = IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT,
+
+	.low_alarm_ctrl = IMX7_TEMPSENSE0,
+	.low_alarm_mask = IMX7_TEMPSENSE0_LOW_ALARM_MASK,
+	.low_alarm_shift = IMX7_TEMPSENSE0_LOW_ALARM_SHIFT,
+};
+
+struct imx_thermal_data {
+	struct device *dev;
+	struct cpufreq_policy *policy;
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+	struct regmap *tempmon;
+	u32 c1, c2; /* See formula in imx_init_calib() */
+	int temp_passive;
+	int temp_critical;
+	int temp_max;
+	int alarm_temp;
+	int last_temp;
+	bool irq_enabled;
+	int irq;
+	struct clk *thermal_clk;
+	const struct thermal_soc_data *socdata;
+	const char *temp_grade;
+};
+
+static void imx_set_panic_temp(struct imx_thermal_data *data,
+			       int panic_temp)
+{
+	const struct thermal_soc_data *soc_data = data->socdata;
+	struct regmap *map = data->tempmon;
+	int critical_value;
+
+	critical_value = (data->c2 - panic_temp) / data->c1;
+
+	regmap_write(map, soc_data->panic_alarm_ctrl + REG_CLR,
+		     soc_data->panic_alarm_mask);
+	regmap_write(map, soc_data->panic_alarm_ctrl + REG_SET,
+		     critical_value << soc_data->panic_alarm_shift);
+}
+
+static void imx_set_alarm_temp(struct imx_thermal_data *data,
+			       int alarm_temp)
+{
+	struct regmap *map = data->tempmon;
+	const struct thermal_soc_data *soc_data = data->socdata;
+	int alarm_value;
+
+	data->alarm_temp = alarm_temp;
+
+	if (data->socdata->version == TEMPMON_IMX7D)
+		alarm_value = alarm_temp / 1000 + data->c1 - 25;
+	else
+		alarm_value = (data->c2 - alarm_temp) / data->c1;
+
+	regmap_write(map, soc_data->high_alarm_ctrl + REG_CLR,
+		     soc_data->high_alarm_mask);
+	regmap_write(map, soc_data->high_alarm_ctrl + REG_SET,
+		     alarm_value << soc_data->high_alarm_shift);
+}
+
+static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct imx_thermal_data *data = tz->devdata;
+	const struct thermal_soc_data *soc_data = data->socdata;
+	struct regmap *map = data->tempmon;
+	unsigned int n_meas;
+	u32 val;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(data->dev);
+	if (ret < 0)
+		return ret;
+
+	regmap_read(map, soc_data->temp_data, &val);
+
+	if ((val & soc_data->temp_valid_mask) == 0) {
+		dev_dbg(&tz->device, "temp measurement never finished\n");
+		return -EAGAIN;
+	}
+
+	n_meas = (val & soc_data->temp_value_mask)
+		>> soc_data->temp_value_shift;
+
+	/* See imx_init_calib() for formula derivation */
+	if (data->socdata->version == TEMPMON_IMX7D)
+		*temp = (n_meas - data->c1 + 25) * 1000;
+	else
+		*temp = data->c2 - n_meas * data->c1;
+
+	/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
+	if (data->socdata->version == TEMPMON_IMX6Q) {
+		if (data->alarm_temp == data->temp_passive &&
+			*temp >= data->temp_passive)
+			imx_set_alarm_temp(data, data->temp_critical);
+		if (data->alarm_temp == data->temp_critical &&
+			*temp < data->temp_passive) {
+			imx_set_alarm_temp(data, data->temp_passive);
+			dev_dbg(&tz->device, "thermal alarm off: T < %d\n",
+				data->alarm_temp / 1000);
+		}
+	}
+
+	if (*temp != data->last_temp) {
+		dev_dbg(&tz->device, "millicelsius: %d\n", *temp);
+		data->last_temp = *temp;
+	}
+
+	/* Reenable alarm IRQ if temperature below alarm temperature */
+	if (!data->irq_enabled && *temp < data->alarm_temp) {
+		data->irq_enabled = true;
+		enable_irq(data->irq);
+	}
+
+	pm_runtime_put(data->dev);
+
+	return 0;
+}
+
+static int imx_change_mode(struct thermal_zone_device *tz,
+			   enum thermal_device_mode mode)
+{
+	struct imx_thermal_data *data = tz->devdata;
+
+	if (mode == THERMAL_DEVICE_ENABLED) {
+		pm_runtime_get(data->dev);
+
+		if (!data->irq_enabled) {
+			data->irq_enabled = true;
+			enable_irq(data->irq);
+		}
+	} else {
+		pm_runtime_put(data->dev);
+
+		if (data->irq_enabled) {
+			disable_irq(data->irq);
+			data->irq_enabled = false;
+		}
+	}
+
+	return 0;
+}
+
+static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
+			     enum thermal_trip_type *type)
+{
+	*type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
+					     THERMAL_TRIP_CRITICAL;
+	return 0;
+}
+
+static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct imx_thermal_data *data = tz->devdata;
+
+	*temp = data->temp_critical;
+	return 0;
+}
+
+static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
+			     int *temp)
+{
+	struct imx_thermal_data *data = tz->devdata;
+
+	*temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive :
+					     data->temp_critical;
+	return 0;
+}
+
+static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
+			     int temp)
+{
+	struct imx_thermal_data *data = tz->devdata;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(data->dev);
+	if (ret < 0)
+		return ret;
+
+	/* do not allow changing critical threshold */
+	if (trip == IMX_TRIP_CRITICAL)
+		return -EPERM;
+
+	/* do not allow passive to be set higher than critical */
+	if (temp < 0 || temp > data->temp_critical)
+		return -EINVAL;
+
+	data->temp_passive = temp;
+
+	imx_set_alarm_temp(data, temp);
+
+	pm_runtime_put(data->dev);
+
+	return 0;
+}
+
+static int imx_bind(struct thermal_zone_device *tz,
+		    struct thermal_cooling_device *cdev)
+{
+	int ret;
+
+	ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev,
+					       THERMAL_NO_LIMIT,
+					       THERMAL_NO_LIMIT,
+					       THERMAL_WEIGHT_DEFAULT);
+	if (ret) {
+		dev_err(&tz->device,
+			"binding zone %s with cdev %s failed:%d\n",
+			tz->type, cdev->type, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx_unbind(struct thermal_zone_device *tz,
+		      struct thermal_cooling_device *cdev)
+{
+	int ret;
+
+	ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev);
+	if (ret) {
+		dev_err(&tz->device,
+			"unbinding zone %s with cdev %s failed:%d\n",
+			tz->type, cdev->type, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops imx_tz_ops = {
+	.bind = imx_bind,
+	.unbind = imx_unbind,
+	.get_temp = imx_get_temp,
+	.change_mode = imx_change_mode,
+	.get_trip_type = imx_get_trip_type,
+	.get_trip_temp = imx_get_trip_temp,
+	.get_crit_temp = imx_get_crit_temp,
+	.set_trip_temp = imx_set_trip_temp,
+};
+
+static int imx_init_calib(struct platform_device *pdev, u32 ocotp_ana1)
+{
+	struct imx_thermal_data *data = platform_get_drvdata(pdev);
+	int n1;
+	u64 temp64;
+
+	if (ocotp_ana1 == 0 || ocotp_ana1 == ~0) {
+		dev_err(&pdev->dev, "invalid sensor calibration data\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * On i.MX7D, we only use the calibration data at 25C to get the temp,
+	 * Tmeas = ( Nmeas - n1) + 25; n1 is the fuse value for 25C.
+	 */
+	if (data->socdata->version == TEMPMON_IMX7D) {
+		data->c1 = (ocotp_ana1 >> 9) & 0x1ff;
+		return 0;
+	}
+
+	/*
+	 * The sensor is calibrated at 25 °C (aka T1) and the value measured
+	 * (aka N1) at this temperature is provided in bits [31:20] in the
+	 * i.MX's OCOTP value ANA1.
+	 * To find the actual temperature T, the following formula has to be used
+	 * when reading value n from the sensor:
+	 *
+	 * T = T1 + (N - N1) / (0.4148468 - 0.0015423 * N1) °C + 3.580661 °C
+	 *   = [T1' - N1 / (0.4148468 - 0.0015423 * N1) °C] + N / (0.4148468 - 0.0015423 * N1) °C
+	 *   = [T1' + N1 / (0.0015423 * N1 - 0.4148468) °C] - N / (0.0015423 * N1 - 0.4148468) °C
+	 *   = c2 - c1 * N
+	 *
+	 * with
+	 *
+	 *  T1' = 28.580661 °C
+	 *   c1 = 1 / (0.0015423 * N1 - 0.4297157) °C
+	 *   c2 = T1' + N1 / (0.0015423 * N1 - 0.4148468) °C
+	 *      = T1' + N1 * c1
+	 */
+	n1 = ocotp_ana1 >> 20;
+
+	temp64 = 10000000; /* use 10^7 as fixed point constant for values in formula */
+	temp64 *= 1000; /* to get result in °mC */
+	do_div(temp64, 15423 * n1 - 4148468);
+	data->c1 = temp64;
+	data->c2 = n1 * data->c1 + 28581;
+
+	return 0;
+}
+
+static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
+{
+	struct imx_thermal_data *data = platform_get_drvdata(pdev);
+
+	/* The maximum die temp is specified by the Temperature Grade */
+	switch ((ocotp_mem0 >> 6) & 0x3) {
+	case 0: /* Commercial (0 to 95 °C) */
+		data->temp_grade = "Commercial";
+		data->temp_max = 95000;
+		break;
+	case 1: /* Extended Commercial (-20 °C to 105 °C) */
+		data->temp_grade = "Extended Commercial";
+		data->temp_max = 105000;
+		break;
+	case 2: /* Industrial (-40 °C to 105 °C) */
+		data->temp_grade = "Industrial";
+		data->temp_max = 105000;
+		break;
+	case 3: /* Automotive (-40 °C to 125 °C) */
+		data->temp_grade = "Automotive";
+		data->temp_max = 125000;
+		break;
+	}
+
+	/*
+	 * Set the critical trip point at 5 °C under max
+	 * Set the passive trip point at 10 °C under max (changeable via sysfs)
+	 */
+	data->temp_critical = data->temp_max - (1000 * 5);
+	data->temp_passive = data->temp_max - (1000 * 10);
+}
+
+static int imx_init_from_tempmon_data(struct platform_device *pdev)
+{
+	struct regmap *map;
+	int ret;
+	u32 val;
+
+	map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+					      "fsl,tempmon-data");
+	if (IS_ERR(map)) {
+		ret = PTR_ERR(map);
+		dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(map, OCOTP_ANA1, &val);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+		return ret;
+	}
+	ret = imx_init_calib(pdev, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(map, OCOTP_MEM0, &val);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+		return ret;
+	}
+	imx_init_temp_grade(pdev, val);
+
+	return 0;
+}
+
+static int imx_init_from_nvmem_cells(struct platform_device *pdev)
+{
+	int ret;
+	u32 val;
+
+	ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val);
+	if (ret)
+		return ret;
+
+	ret = imx_init_calib(pdev, val);
+	if (ret)
+		return ret;
+
+	ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val);
+	if (ret)
+		return ret;
+	imx_init_temp_grade(pdev, val);
+
+	return 0;
+}
+
+static irqreturn_t imx_thermal_alarm_irq(int irq, void *dev)
+{
+	struct imx_thermal_data *data = dev;
+
+	disable_irq_nosync(irq);
+	data->irq_enabled = false;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev)
+{
+	struct imx_thermal_data *data = dev;
+
+	dev_dbg(&data->tz->device, "THERMAL ALARM: T > %d\n",
+		data->alarm_temp / 1000);
+
+	thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id of_imx_thermal_match[] = {
+	{ .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, },
+	{ .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, },
+	{ .compatible = "fsl,imx7d-tempmon", .data = &thermal_imx7d_data, },
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Create cooling device in case no #cooling-cells property is available in
+ * CPU node
+ */
+static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
+{
+	struct device_node *np;
+	int ret = 0;
+
+	data->policy = cpufreq_cpu_get(0);
+	if (!data->policy) {
+		pr_debug("%s: CPUFreq policy not found\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	np = of_get_cpu_node(data->policy->cpu, NULL);
+
+	if (!np || !of_find_property(np, "#cooling-cells", NULL)) {
+		data->cdev = cpufreq_cooling_register(data->policy);
+		if (IS_ERR(data->cdev)) {
+			ret = PTR_ERR(data->cdev);
+			cpufreq_cpu_put(data->policy);
+		}
+	}
+
+	of_node_put(np);
+
+	return ret;
+}
+
+static void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data)
+{
+	cpufreq_cooling_unregister(data->cdev);
+	cpufreq_cpu_put(data->policy);
+}
+
+#else
+
+static inline int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
+{
+	return 0;
+}
+
+static inline void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data)
+{
+}
+#endif
+
+static int imx_thermal_probe(struct platform_device *pdev)
+{
+	struct imx_thermal_data *data;
+	struct regmap *map;
+	int measure_freq;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = &pdev->dev;
+
+	map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
+	if (IS_ERR(map)) {
+		ret = PTR_ERR(map);
+		dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret);
+		return ret;
+	}
+	data->tempmon = map;
+
+	data->socdata = of_device_get_match_data(&pdev->dev);
+	if (!data->socdata) {
+		dev_err(&pdev->dev, "no device match found\n");
+		return -ENODEV;
+	}
+
+	/* make sure the IRQ flag is clear before enabling irq on i.MX6SX */
+	if (data->socdata->version == TEMPMON_IMX6SX) {
+		regmap_write(map, IMX6_MISC1 + REG_CLR,
+			IMX6_MISC1_IRQ_TEMPHIGH | IMX6_MISC1_IRQ_TEMPLOW
+			| IMX6_MISC1_IRQ_TEMPPANIC);
+		/*
+		 * reset value of LOW ALARM is incorrect, set it to lowest
+		 * value to avoid false trigger of low alarm.
+		 */
+		regmap_write(map, data->socdata->low_alarm_ctrl + REG_SET,
+			     data->socdata->low_alarm_mask);
+	}
+
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0)
+		return data->irq;
+
+	platform_set_drvdata(pdev, data);
+
+	if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
+		ret = imx_init_from_nvmem_cells(pdev);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+					     "failed to init from nvmem\n");
+	} else {
+		ret = imx_init_from_tempmon_data(pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to init from fsl,tempmon-data\n");
+			return ret;
+		}
+	}
+
+	/* Make sure sensor is in known good state for measurements */
+	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+		     data->socdata->power_down_mask);
+	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+		     data->socdata->measure_temp_mask);
+	regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
+		     data->socdata->measure_freq_mask);
+	if (data->socdata->version != TEMPMON_IMX7D)
+		regmap_write(map, IMX6_MISC0 + REG_SET,
+			IMX6_MISC0_REFTOP_SELBIASOFF);
+	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+		     data->socdata->power_down_mask);
+
+	ret = imx_thermal_register_legacy_cooling(data);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to register cpufreq cooling device\n");
+
+	data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->thermal_clk)) {
+		ret = PTR_ERR(data->thermal_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to get thermal clk: %d\n", ret);
+		goto legacy_cleanup;
+	}
+
+	/*
+	 * Thermal sensor needs clk on to get correct value, normally
+	 * we should enable its clk before taking measurement and disable
+	 * clk after measurement is done, but if alarm function is enabled,
+	 * hardware will auto measure the temperature periodically, so we
+	 * need to keep the clk always on for alarm function.
+	 */
+	ret = clk_prepare_enable(data->thermal_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+		goto legacy_cleanup;
+	}
+
+	data->tz = thermal_zone_device_register("imx_thermal_zone",
+						IMX_TRIP_NUM,
+						BIT(IMX_TRIP_PASSIVE), data,
+						&imx_tz_ops, NULL,
+						IMX_PASSIVE_DELAY,
+						IMX_POLLING_DELAY);
+	if (IS_ERR(data->tz)) {
+		ret = PTR_ERR(data->tz);
+		dev_err(&pdev->dev,
+			"failed to register thermal zone device %d\n", ret);
+		goto clk_disable;
+	}
+
+	dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
+		 " critical:%dC passive:%dC\n", data->temp_grade,
+		 data->temp_max / 1000, data->temp_critical / 1000,
+		 data->temp_passive / 1000);
+
+	/* Enable measurements at ~ 10 Hz */
+	regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
+		     data->socdata->measure_freq_mask);
+	measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
+	regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
+		     measure_freq << data->socdata->measure_freq_shift);
+	imx_set_alarm_temp(data, data->temp_passive);
+
+	if (data->socdata->version == TEMPMON_IMX6SX)
+		imx_set_panic_temp(data, data->temp_critical);
+
+	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+		     data->socdata->power_down_mask);
+	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+		     data->socdata->measure_temp_mask);
+	/* After power up, we need a delay before first access can be done. */
+	usleep_range(20, 50);
+
+	/* the core was configured and enabled just before */
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(data->dev);
+
+	ret = pm_runtime_resume_and_get(data->dev);
+	if (ret < 0)
+		goto disable_runtime_pm;
+
+	data->irq_enabled = true;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		goto thermal_zone_unregister;
+
+	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
+			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
+			0, "imx_thermal", data);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
+		goto thermal_zone_unregister;
+	}
+
+	pm_runtime_put(data->dev);
+
+	return 0;
+
+thermal_zone_unregister:
+	thermal_zone_device_unregister(data->tz);
+disable_runtime_pm:
+	pm_runtime_put_noidle(data->dev);
+	pm_runtime_disable(data->dev);
+clk_disable:
+	clk_disable_unprepare(data->thermal_clk);
+legacy_cleanup:
+	imx_thermal_unregister_legacy_cooling(data);
+
+	return ret;
+}
+
+static int imx_thermal_remove(struct platform_device *pdev)
+{
+	struct imx_thermal_data *data = platform_get_drvdata(pdev);
+
+	pm_runtime_put_noidle(data->dev);
+	pm_runtime_disable(data->dev);
+
+	thermal_zone_device_unregister(data->tz);
+	imx_thermal_unregister_legacy_cooling(data);
+
+	return 0;
+}
+
+static int __maybe_unused imx_thermal_suspend(struct device *dev)
+{
+	struct imx_thermal_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	/*
+	 * Need to disable thermal sensor, otherwise, when thermal core
+	 * try to get temperature before thermal sensor resume, a wrong
+	 * temperature will be read as the thermal sensor is powered
+	 * down. This is done in change_mode() operation called from
+	 * thermal_zone_device_disable()
+	 */
+	ret = thermal_zone_device_disable(data->tz);
+	if (ret)
+		return ret;
+
+	return pm_runtime_force_suspend(data->dev);
+}
+
+static int __maybe_unused imx_thermal_resume(struct device *dev)
+{
+	struct imx_thermal_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_force_resume(data->dev);
+	if (ret)
+		return ret;
+	/* Enabled thermal sensor after resume */
+	return thermal_zone_device_enable(data->tz);
+}
+
+static int __maybe_unused imx_thermal_runtime_suspend(struct device *dev)
+{
+	struct imx_thermal_data *data = dev_get_drvdata(dev);
+	const struct thermal_soc_data *socdata = data->socdata;
+	struct regmap *map = data->tempmon;
+	int ret;
+
+	ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
+			   socdata->measure_temp_mask);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
+			   socdata->power_down_mask);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(data->thermal_clk);
+
+	return 0;
+}
+
+static int __maybe_unused imx_thermal_runtime_resume(struct device *dev)
+{
+	struct imx_thermal_data *data = dev_get_drvdata(dev);
+	const struct thermal_soc_data *socdata = data->socdata;
+	struct regmap *map = data->tempmon;
+	int ret;
+
+	ret = clk_prepare_enable(data->thermal_clk);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
+			   socdata->power_down_mask);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
+			   socdata->measure_temp_mask);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to the temp sensor designers, it may require up to ~17us
+	 * to complete a measurement.
+	 */
+	usleep_range(20, 50);
+
+	return 0;
+}
+
+static const struct dev_pm_ops imx_thermal_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(imx_thermal_suspend, imx_thermal_resume)
+	SET_RUNTIME_PM_OPS(imx_thermal_runtime_suspend,
+			   imx_thermal_runtime_resume, NULL)
+};
+
+static struct platform_driver imx_thermal = {
+	.driver = {
+		.name	= "imx_thermal",
+		.pm	= &imx_thermal_pm_ops,
+		.of_match_table = of_imx_thermal_match,
+	},
+	.probe		= imx_thermal_probe,
+	.remove		= imx_thermal_remove,
+};
+module_platform_driver(imx_thermal);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-thermal");
diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
new file mode 100644
index 000000000..e3cfad10d
--- /dev/null
+++ b/drivers/thermal/intel/Kconfig
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config INTEL_POWERCLAMP
+	tristate "Intel PowerClamp idle injection driver"
+	depends on X86
+	depends on CPU_SUP_INTEL
+	help
+	  Enable this to enable Intel PowerClamp idle injection driver. This
+	  enforce idle time which results in more package C-state residency. The
+	  user interface is exposed via generic thermal framework.
+
+config X86_THERMAL_VECTOR
+	def_bool y
+	depends on X86 && CPU_SUP_INTEL && X86_LOCAL_APIC
+
+config X86_PKG_TEMP_THERMAL
+	tristate "X86 package temperature thermal driver"
+	depends on X86_THERMAL_VECTOR
+	select THERMAL_GOV_USER_SPACE
+	select THERMAL_WRITABLE_TRIPS
+	default m
+	help
+	  Enable this to register CPU digital sensor for package temperature as
+	  thermal zone. Each package will have its own thermal zone. There are
+	  two trip points which can be set by user to get notifications via thermal
+	  notification methods.
+
+config INTEL_SOC_DTS_IOSF_CORE
+	tristate
+	depends on X86 && PCI
+	select IOSF_MBI
+	help
+	  This is becoming a common feature for Intel SoCs to expose the additional
+	  digital temperature sensors (DTSs) using side band interface (IOSF). This
+	  implements the common set of helper functions to register, get temperature
+	  and get/set thresholds on DTSs.
+
+config INTEL_SOC_DTS_THERMAL
+	tristate "Intel SoCs DTS thermal driver"
+	depends on X86 && PCI && ACPI
+	select INTEL_SOC_DTS_IOSF_CORE
+	select THERMAL_WRITABLE_TRIPS
+	help
+	  Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
+	  temperature sensor (DTS). These SoCs have two additional DTSs in
+	  addition to DTSs on CPU cores. Each DTS will be registered as a
+	  thermal zone. There are two trip points. One of the trip point can
+	  be set by user mode programs to get notifications via Linux thermal
+	  notification methods.The other trip is a critical trip point, which
+	  was set by the driver based on the TJ MAX temperature.
+
+config INTEL_QUARK_DTS_THERMAL
+	tristate "Intel Quark DTS thermal driver"
+	depends on X86_INTEL_QUARK
+	help
+	  Enable this to register Intel Quark SoC (e.g. X1000) platform digital
+	  temperature sensor (DTS). For X1000 SoC, it has one on-die DTS.
+	  The DTS will be registered as a thermal zone. There are two trip points:
+	  hot & critical. The critical trip point default value is set by
+	  underlying BIOS/Firmware.
+
+menu "ACPI INT340X thermal drivers"
+source "drivers/thermal/intel/int340x_thermal/Kconfig"
+endmenu
+
+config INTEL_BXT_PMIC_THERMAL
+	tristate "Intel Broxton PMIC thermal driver"
+	depends on X86 && INTEL_SOC_PMIC_BXTWC
+	select REGMAP
+	help
+	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
+	  system temperature measurements and alerts.
+	  This driver is used for monitoring the ADC channels of PMIC and handles
+	  the alert trip point interrupts and notifies the thermal framework with
+	  the trip point and temperature details of the zone.
+
+config INTEL_PCH_THERMAL
+	tristate "Intel PCH Thermal Reporting Driver"
+	depends on X86 && PCI
+	help
+	  Enable this to support thermal reporting on certain intel PCHs.
+	  Thermal reporting device will provide temperature reading,
+	  programmable trip points and other information.
+
+config INTEL_TCC_COOLING
+	tristate "Intel TCC offset cooling Driver"
+	depends on X86
+	help
+	  Enable this to support system cooling by adjusting the effective TCC
+	  activation temperature via the TCC Offset register, which is widely
+	  supported on modern Intel platforms.
+	  Note that, on different platforms, the behavior might be different
+	  on how fast the setting takes effect, and how much the CPU frequency
+	  is reduced.
+
+config INTEL_MENLOW
+	tristate "Thermal Management driver for Intel menlow platform"
+	depends on ACPI_THERMAL
+	help
+	  ACPI thermal management enhancement driver on
+	  Intel Menlow platform.
+
+	  If unsure, say N.
+
+config INTEL_HFI_THERMAL
+	bool "Intel Hardware Feedback Interface"
+	depends on NET
+	depends on CPU_SUP_INTEL
+	depends on X86_THERMAL_VECTOR
+	select THERMAL_NETLINK
+	help
+	  Select this option to enable the Hardware Feedback Interface. If
+	  selected, hardware provides guidance to the operating system on
+	  the performance and energy efficiency capabilities of each CPU.
+	  These capabilities may change as a result of changes in the operating
+	  conditions of the system such power and thermal limits. If selected,
+	  the kernel relays updates in CPUs' capabilities to userspace.
diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile
new file mode 100644
index 000000000..9a8d8054f
--- /dev/null
+++ b/drivers/thermal/intel/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for various Intel thermal drivers.
+
+obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
+obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
+obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE)	+= intel_soc_dts_iosf.o
+obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
+obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL)	+= intel_quark_dts_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)  += int340x_thermal/
+obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
+obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o
+obj-$(CONFIG_INTEL_TCC_COOLING)	+= intel_tcc_cooling.o
+obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
+obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
+obj-$(CONFIG_INTEL_HFI_THERMAL) += intel_hfi.o
diff --git a/drivers/thermal/intel/int340x_thermal/Kconfig b/drivers/thermal/intel/int340x_thermal/Kconfig
new file mode 100644
index 000000000..5d046de96
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/Kconfig
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# ACPI INT340x thermal drivers configuration
+#
+
+config INT340X_THERMAL
+	tristate "ACPI INT340X thermal drivers"
+	depends on X86_64 && ACPI && PCI
+	select THERMAL_GOV_USER_SPACE
+	select ACPI_THERMAL_REL
+	select ACPI_FAN
+	select INTEL_SOC_DTS_IOSF_CORE
+	select PROC_THERMAL_MMIO_RAPL if POWERCAP
+	help
+	  Newer laptops and tablets that use ACPI may have thermal sensors and
+	  other devices with thermal control capabilities outside the core
+	  CPU/SOC, for thermal safety reasons.
+	  They are exposed for the OS to use via the INT3400 ACPI device object
+	  as the master, and INT3401~INT340B ACPI device objects as the slaves.
+	  Enable this to expose the temperature information and cooling ability
+	  from these objects to userspace via the normal thermal framework.
+	  This means that a wide range of applications and GUI widgets can show
+	  the information to the user or use this information for making
+	  decisions. For example, the Intel Thermal Daemon can use this
+	  information to allow the user to select his laptop to run without
+	  turning on the fans.
+
+config ACPI_THERMAL_REL
+	tristate
+	depends on ACPI
+
+if INT340X_THERMAL
+
+config INT3406_THERMAL
+	tristate "ACPI INT3406 display thermal driver"
+	depends on ACPI_VIDEO
+	help
+	  The display thermal device represents the LED/LCD display panel
+	  that may or may not include touch support. The main function of
+	  the display thermal device is to allow control of the display
+	  brightness in order to address a thermal condition or to reduce
+	  power consumed by display device.
+
+config PROC_THERMAL_MMIO_RAPL
+	tristate
+	select INTEL_RAPL_CORE
+endif
diff --git a/drivers/thermal/intel/int340x_thermal/Makefile b/drivers/thermal/intel/int340x_thermal/Makefile
new file mode 100644
index 000000000..4e852ce4a
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_INT340X_THERMAL)	+= int3400_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= int340x_thermal_zone.o
+obj-$(CONFIG_INT340X_THERMAL)	+= int3402_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= int3403_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device.o
+obj-$(CONFIG_INT340X_THERMAL)	+= int3401_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device_pci_legacy.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device_pci.o
+obj-$(CONFIG_PROC_THERMAL_MMIO_RAPL) += processor_thermal_rapl.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_rfim.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_mbox.o
+obj-$(CONFIG_INT3406_THERMAL)	+= int3406_thermal.o
+obj-$(CONFIG_ACPI_THERMAL_REL)	+= acpi_thermal_rel.o
diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
new file mode 100644
index 000000000..01b80331e
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* acpi_thermal_rel.c driver for exporting ACPI thermal relationship
+ *
+ * Copyright (c) 2014 Intel Corp
+ */
+
+/*
+ * Two functionalities included:
+ * 1. Export _TRT, _ART, via misc device interface to the userspace.
+ * 2. Provide parsing result to kernel drivers
+ *
+ */
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include "acpi_thermal_rel.h"
+
+static acpi_handle acpi_thermal_rel_handle;
+static DEFINE_SPINLOCK(acpi_thermal_rel_chrdev_lock);
+static int acpi_thermal_rel_chrdev_count;	/* #times opened */
+static int acpi_thermal_rel_chrdev_exclu;	/* already open exclusive? */
+
+static int acpi_thermal_rel_open(struct inode *inode, struct file *file)
+{
+	spin_lock(&acpi_thermal_rel_chrdev_lock);
+	if (acpi_thermal_rel_chrdev_exclu ||
+	    (acpi_thermal_rel_chrdev_count && (file->f_flags & O_EXCL))) {
+		spin_unlock(&acpi_thermal_rel_chrdev_lock);
+		return -EBUSY;
+	}
+
+	if (file->f_flags & O_EXCL)
+		acpi_thermal_rel_chrdev_exclu = 1;
+	acpi_thermal_rel_chrdev_count++;
+
+	spin_unlock(&acpi_thermal_rel_chrdev_lock);
+
+	return nonseekable_open(inode, file);
+}
+
+static int acpi_thermal_rel_release(struct inode *inode, struct file *file)
+{
+	spin_lock(&acpi_thermal_rel_chrdev_lock);
+	acpi_thermal_rel_chrdev_count--;
+	acpi_thermal_rel_chrdev_exclu = 0;
+	spin_unlock(&acpi_thermal_rel_chrdev_lock);
+
+	return 0;
+}
+
+/**
+ * acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling
+ *
+ * @handle: ACPI handle of the device contains _TRT
+ * @trt_count: the number of valid entries resulted from parsing _TRT
+ * @trtp: pointer to pointer of array of _TRT entries in parsing result
+ * @create_dev: whether to create platform devices for target and source
+ *
+ */
+int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
+		bool create_dev)
+{
+	acpi_status status;
+	int result = 0;
+	int i;
+	int nr_bad_entries = 0;
+	struct trt *trts;
+	union acpi_object *p;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer element = { 0, NULL };
+	struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" };
+
+	status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	p = buffer.pointer;
+	if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+		pr_err("Invalid _TRT data\n");
+		result = -EFAULT;
+		goto end;
+	}
+
+	*trt_count = p->package.count;
+	trts = kcalloc(*trt_count, sizeof(struct trt), GFP_KERNEL);
+	if (!trts) {
+		result = -ENOMEM;
+		goto end;
+	}
+
+	for (i = 0; i < *trt_count; i++) {
+		struct trt *trt = &trts[i - nr_bad_entries];
+
+		element.length = sizeof(struct trt);
+		element.pointer = trt;
+
+		status = acpi_extract_package(&(p->package.elements[i]),
+					      &trt_format, &element);
+		if (ACPI_FAILURE(status)) {
+			nr_bad_entries++;
+			pr_warn("_TRT package %d is invalid, ignored\n", i);
+			continue;
+		}
+		if (!create_dev)
+			continue;
+
+		if (!acpi_fetch_acpi_dev(trt->source))
+			pr_warn("Failed to get source ACPI device\n");
+
+		if (!acpi_fetch_acpi_dev(trt->target))
+			pr_warn("Failed to get target ACPI device\n");
+	}
+
+	result = 0;
+
+	*trtp = trts;
+	/* don't count bad entries */
+	*trt_count -= nr_bad_entries;
+end:
+	kfree(buffer.pointer);
+	return result;
+}
+EXPORT_SYMBOL(acpi_parse_trt);
+
+/**
+ * acpi_parse_art - Parse Active Relationship Table _ART
+ *
+ * @handle: ACPI handle of the device contains _ART
+ * @art_count: the number of valid entries resulted from parsing _ART
+ * @artp: pointer to pointer of array of art entries in parsing result
+ * @create_dev: whether to create platform devices for target and source
+ *
+ */
+int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
+		bool create_dev)
+{
+	acpi_status status;
+	int result = 0;
+	int i;
+	int nr_bad_entries = 0;
+	struct art *arts;
+	union acpi_object *p;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer element = { 0, NULL };
+	struct acpi_buffer art_format =	{
+		sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" };
+
+	status = acpi_evaluate_object(handle, "_ART", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	p = buffer.pointer;
+	if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+		pr_err("Invalid _ART data\n");
+		result = -EFAULT;
+		goto end;
+	}
+
+	/* ignore p->package.elements[0], as this is _ART Revision field */
+	*art_count = p->package.count - 1;
+	arts = kcalloc(*art_count, sizeof(struct art), GFP_KERNEL);
+	if (!arts) {
+		result = -ENOMEM;
+		goto end;
+	}
+
+	for (i = 0; i < *art_count; i++) {
+		struct art *art = &arts[i - nr_bad_entries];
+
+		element.length = sizeof(struct art);
+		element.pointer = art;
+
+		status = acpi_extract_package(&(p->package.elements[i + 1]),
+					      &art_format, &element);
+		if (ACPI_FAILURE(status)) {
+			pr_warn("_ART package %d is invalid, ignored", i);
+			nr_bad_entries++;
+			continue;
+		}
+		if (!create_dev)
+			continue;
+
+		if (!acpi_fetch_acpi_dev(art->source))
+			pr_warn("Failed to get source ACPI device\n");
+
+		if (!acpi_fetch_acpi_dev(art->target))
+			pr_warn("Failed to get target ACPI device\n");
+	}
+
+	*artp = arts;
+	/* don't count bad entries */
+	*art_count -= nr_bad_entries;
+end:
+	kfree(buffer.pointer);
+	return result;
+}
+EXPORT_SYMBOL(acpi_parse_art);
+
+
+/* get device name from acpi handle */
+static void get_single_name(acpi_handle handle, char *name)
+{
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER};
+
+	if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)))
+		pr_warn("Failed to get device name from acpi handle\n");
+	else {
+		memcpy(name, buffer.pointer, ACPI_NAMESEG_SIZE);
+		kfree(buffer.pointer);
+	}
+}
+
+static int fill_art(char __user *ubuf)
+{
+	int i;
+	int ret;
+	int count;
+	int art_len;
+	struct art *arts = NULL;
+	union art_object *art_user;
+
+	ret = acpi_parse_art(acpi_thermal_rel_handle, &count, &arts, false);
+	if (ret)
+		goto free_art;
+	art_len = count * sizeof(union art_object);
+	art_user = kzalloc(art_len, GFP_KERNEL);
+	if (!art_user) {
+		ret = -ENOMEM;
+		goto free_art;
+	}
+	/* now fill in user art data */
+	for (i = 0; i < count; i++) {
+		/* userspace art needs device name instead of acpi reference */
+		get_single_name(arts[i].source, art_user[i].source_device);
+		get_single_name(arts[i].target, art_user[i].target_device);
+		/* copy the rest int data in addition to source and target */
+		BUILD_BUG_ON(sizeof(art_user[i].data) !=
+			     sizeof(u64) * (ACPI_NR_ART_ELEMENTS - 2));
+		memcpy(&art_user[i].data, &arts[i].data, sizeof(art_user[i].data));
+	}
+
+	if (copy_to_user(ubuf, art_user, art_len))
+		ret = -EFAULT;
+	kfree(art_user);
+free_art:
+	kfree(arts);
+	return ret;
+}
+
+static int fill_trt(char __user *ubuf)
+{
+	int i;
+	int ret;
+	int count;
+	int trt_len;
+	struct trt *trts = NULL;
+	union trt_object *trt_user;
+
+	ret = acpi_parse_trt(acpi_thermal_rel_handle, &count, &trts, false);
+	if (ret)
+		goto free_trt;
+	trt_len = count * sizeof(union trt_object);
+	trt_user = kzalloc(trt_len, GFP_KERNEL);
+	if (!trt_user) {
+		ret = -ENOMEM;
+		goto free_trt;
+	}
+	/* now fill in user trt data */
+	for (i = 0; i < count; i++) {
+		/* userspace trt needs device name instead of acpi reference */
+		get_single_name(trts[i].source, trt_user[i].source_device);
+		get_single_name(trts[i].target, trt_user[i].target_device);
+		trt_user[i].sample_period = trts[i].sample_period;
+		trt_user[i].influence = trts[i].influence;
+	}
+
+	if (copy_to_user(ubuf, trt_user, trt_len))
+		ret = -EFAULT;
+	kfree(trt_user);
+free_trt:
+	kfree(trts);
+	return ret;
+}
+
+static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
+				   unsigned long __arg)
+{
+	int ret = 0;
+	unsigned long length = 0;
+	int count = 0;
+	char __user *arg = (void __user *)__arg;
+	struct trt *trts = NULL;
+	struct art *arts = NULL;
+
+	switch (cmd) {
+	case ACPI_THERMAL_GET_TRT_COUNT:
+		ret = acpi_parse_trt(acpi_thermal_rel_handle, &count,
+				&trts, false);
+		kfree(trts);
+		if (!ret)
+			return put_user(count, (unsigned long __user *)__arg);
+		return ret;
+	case ACPI_THERMAL_GET_TRT_LEN:
+		ret = acpi_parse_trt(acpi_thermal_rel_handle, &count,
+				&trts, false);
+		kfree(trts);
+		length = count * sizeof(union trt_object);
+		if (!ret)
+			return put_user(length, (unsigned long __user *)__arg);
+		return ret;
+	case ACPI_THERMAL_GET_TRT:
+		return fill_trt(arg);
+	case ACPI_THERMAL_GET_ART_COUNT:
+		ret = acpi_parse_art(acpi_thermal_rel_handle, &count,
+				&arts, false);
+		kfree(arts);
+		if (!ret)
+			return put_user(count, (unsigned long __user *)__arg);
+		return ret;
+	case ACPI_THERMAL_GET_ART_LEN:
+		ret = acpi_parse_art(acpi_thermal_rel_handle, &count,
+				&arts, false);
+		kfree(arts);
+		length = count * sizeof(union art_object);
+		if (!ret)
+			return put_user(length, (unsigned long __user *)__arg);
+		return ret;
+
+	case ACPI_THERMAL_GET_ART:
+		return fill_art(arg);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations acpi_thermal_rel_fops = {
+	.owner		= THIS_MODULE,
+	.open		= acpi_thermal_rel_open,
+	.release	= acpi_thermal_rel_release,
+	.unlocked_ioctl	= acpi_thermal_rel_ioctl,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice acpi_thermal_rel_misc_device = {
+	.minor	= MISC_DYNAMIC_MINOR,
+	"acpi_thermal_rel",
+	&acpi_thermal_rel_fops
+};
+
+int acpi_thermal_rel_misc_device_add(acpi_handle handle)
+{
+	acpi_thermal_rel_handle = handle;
+
+	return misc_register(&acpi_thermal_rel_misc_device);
+}
+EXPORT_SYMBOL(acpi_thermal_rel_misc_device_add);
+
+int acpi_thermal_rel_misc_device_remove(acpi_handle handle)
+{
+	misc_deregister(&acpi_thermal_rel_misc_device);
+
+	return 0;
+}
+EXPORT_SYMBOL(acpi_thermal_rel_misc_device_remove);
+
+MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>");
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com");
+MODULE_DESCRIPTION("Intel acpi thermal rel misc dev driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h
new file mode 100644
index 000000000..78d942477
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ACPI_ACPI_THERMAL_H
+#define __ACPI_ACPI_THERMAL_H
+
+#include <asm/ioctl.h>
+
+#define ACPI_THERMAL_MAGIC 's'
+
+#define ACPI_THERMAL_GET_TRT_LEN _IOR(ACPI_THERMAL_MAGIC, 1, unsigned long)
+#define ACPI_THERMAL_GET_ART_LEN _IOR(ACPI_THERMAL_MAGIC, 2, unsigned long)
+#define ACPI_THERMAL_GET_TRT_COUNT _IOR(ACPI_THERMAL_MAGIC, 3, unsigned long)
+#define ACPI_THERMAL_GET_ART_COUNT _IOR(ACPI_THERMAL_MAGIC, 4, unsigned long)
+
+#define ACPI_THERMAL_GET_TRT	_IOR(ACPI_THERMAL_MAGIC, 5, unsigned long)
+#define ACPI_THERMAL_GET_ART	_IOR(ACPI_THERMAL_MAGIC, 6, unsigned long)
+
+struct art {
+	acpi_handle source;
+	acpi_handle target;
+	struct_group(data,
+		u64 weight;
+		u64 ac0_max;
+		u64 ac1_max;
+		u64 ac2_max;
+		u64 ac3_max;
+		u64 ac4_max;
+		u64 ac5_max;
+		u64 ac6_max;
+		u64 ac7_max;
+		u64 ac8_max;
+		u64 ac9_max;
+	);
+} __packed;
+
+struct trt {
+	acpi_handle source;
+	acpi_handle target;
+	u64 influence;
+	u64 sample_period;
+	u64 reserved1;
+	u64 reserved2;
+	u64 reserved3;
+	u64 reserved4;
+} __packed;
+
+#define ACPI_NR_ART_ELEMENTS 13
+/* for usrspace */
+union art_object {
+	struct {
+		char source_device[8]; /* ACPI single name */
+		char target_device[8]; /* ACPI single name */
+		struct_group(data,
+			u64 weight;
+			u64 ac0_max_level;
+			u64 ac1_max_level;
+			u64 ac2_max_level;
+			u64 ac3_max_level;
+			u64 ac4_max_level;
+			u64 ac5_max_level;
+			u64 ac6_max_level;
+			u64 ac7_max_level;
+			u64 ac8_max_level;
+			u64 ac9_max_level;
+		);
+	};
+	u64 __data[ACPI_NR_ART_ELEMENTS];
+};
+
+union trt_object {
+	struct {
+		char source_device[8]; /* ACPI single name */
+		char target_device[8]; /* ACPI single name */
+		u64 influence;
+		u64 sample_period;
+		u64 reserved[4];
+	};
+	u64 __data[8];
+};
+
+#ifdef __KERNEL__
+int acpi_thermal_rel_misc_device_add(acpi_handle handle);
+int acpi_thermal_rel_misc_device_remove(acpi_handle handle);
+int acpi_parse_art(acpi_handle handle, int *art_count, struct art **arts,
+		bool create_dev);
+int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trts,
+		bool create_dev);
+#endif
+
+#endif /* __ACPI_ACPI_THERMAL_H */
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
new file mode 100644
index 000000000..db8a6f636
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -0,0 +1,686 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3400 thermal driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Zhang Rui <rui.zhang@intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include "acpi_thermal_rel.h"
+
+#define INT3400_THERMAL_TABLE_CHANGED 0x83
+#define INT3400_ODVP_CHANGED 0x88
+#define INT3400_KEEP_ALIVE 0xA0
+
+enum int3400_thermal_uuid {
+	INT3400_THERMAL_ACTIVE = 0,
+	INT3400_THERMAL_PASSIVE_1,
+	INT3400_THERMAL_CRITICAL,
+	INT3400_THERMAL_ADAPTIVE_PERFORMANCE,
+	INT3400_THERMAL_EMERGENCY_CALL_MODE,
+	INT3400_THERMAL_PASSIVE_2,
+	INT3400_THERMAL_POWER_BOSS,
+	INT3400_THERMAL_VIRTUAL_SENSOR,
+	INT3400_THERMAL_COOLING_MODE,
+	INT3400_THERMAL_HARDWARE_DUTY_CYCLING,
+	INT3400_THERMAL_MAXIMUM_UUID,
+};
+
+static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {
+	"3A95C389-E4B8-4629-A526-C52C88626BAE",
+	"42A441D6-AE6A-462b-A84B-4A8CE79027D3",
+	"97C68AE7-15FA-499c-B8C9-5DA81D606E0A",
+	"63BE270F-1C11-48FD-A6F7-3AF253FF3E2D",
+	"5349962F-71E6-431D-9AE8-0A635B710AEE",
+	"9E04115A-AE87-4D1C-9500-0F3E340BFE75",
+	"F5A35014-C209-46A4-993A-EB56DE7530A1",
+	"6ED722A7-9240-48A5-B479-31EEF723D7CF",
+	"16CAF1B7-DD38-40ED-B1C1-1B8A1913D531",
+	"BE84BABF-C4D4-403D-B495-3128FD44dAC1",
+};
+
+struct odvp_attr;
+
+struct int3400_thermal_priv {
+	struct acpi_device *adev;
+	struct platform_device *pdev;
+	struct thermal_zone_device *thermal;
+	int art_count;
+	struct art *arts;
+	int trt_count;
+	struct trt *trts;
+	u32 uuid_bitmap;
+	int rel_misc_dev_res;
+	int current_uuid_index;
+	char *data_vault;
+	int odvp_count;
+	int *odvp;
+	u32 os_uuid_mask;
+	struct odvp_attr *odvp_attrs;
+};
+
+static int evaluate_odvp(struct int3400_thermal_priv *priv);
+
+struct odvp_attr {
+	int odvp;
+	struct int3400_thermal_priv *priv;
+	struct device_attribute attr;
+};
+
+static ssize_t data_vault_read(struct file *file, struct kobject *kobj,
+	     struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	memcpy(buf, attr->private + off, count);
+	return count;
+}
+
+static BIN_ATTR_RO(data_vault, 0);
+
+static struct bin_attribute *data_attributes[] = {
+	&bin_attr_data_vault,
+	NULL,
+};
+
+static ssize_t imok_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
+	acpi_status status;
+	int input, ret;
+
+	ret = kstrtouint(buf, 10, &input);
+	if (ret)
+		return ret;
+	status = acpi_execute_simple_method(priv->adev->handle, "IMOK", input);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return count;
+}
+
+static DEVICE_ATTR_WO(imok);
+
+static struct attribute *imok_attr[] = {
+	&dev_attr_imok.attr,
+	NULL
+};
+
+static const struct attribute_group imok_attribute_group = {
+	.attrs = imok_attr,
+};
+
+static const struct attribute_group data_attribute_group = {
+	.bin_attrs = data_attributes,
+};
+
+static ssize_t available_uuids_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
+	int i;
+	int length = 0;
+
+	if (!priv->uuid_bitmap)
+		return sprintf(buf, "UNKNOWN\n");
+
+	for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; i++) {
+		if (priv->uuid_bitmap & (1 << i))
+			length += scnprintf(&buf[length],
+					    PAGE_SIZE - length,
+					    "%s\n",
+					    int3400_thermal_uuids[i]);
+	}
+
+	return length;
+}
+
+static ssize_t current_uuid_show(struct device *dev,
+				 struct device_attribute *devattr, char *buf)
+{
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
+	int i, length = 0;
+
+	if (priv->current_uuid_index > 0)
+		return sprintf(buf, "%s\n",
+			       int3400_thermal_uuids[priv->current_uuid_index]);
+
+	for (i = 0; i <= INT3400_THERMAL_CRITICAL; i++) {
+		if (priv->os_uuid_mask & BIT(i))
+			length += scnprintf(&buf[length],
+					    PAGE_SIZE - length,
+					    "%s\n",
+					    int3400_thermal_uuids[i]);
+	}
+
+	if (length)
+		return length;
+
+	return sprintf(buf, "INVALID\n");
+}
+
+static int int3400_thermal_run_osc(acpi_handle handle, char *uuid_str, int *enable)
+{
+	u32 ret, buf[2];
+	acpi_status status;
+	int result = 0;
+	struct acpi_osc_context context = {
+		.uuid_str = uuid_str,
+		.rev = 1,
+		.cap.length = 8,
+		.cap.pointer = buf,
+	};
+
+	buf[OSC_QUERY_DWORD] = 0;
+	buf[OSC_SUPPORT_DWORD] = *enable;
+
+	status = acpi_run_osc(handle, &context);
+	if (ACPI_SUCCESS(status)) {
+		ret = *((u32 *)(context.ret.pointer + 4));
+		if (ret != *enable)
+			result = -EPERM;
+
+		kfree(context.ret.pointer);
+	} else
+		result = -EPERM;
+
+	return result;
+}
+
+static int set_os_uuid_mask(struct int3400_thermal_priv *priv, u32 mask)
+{
+	int cap = 0;
+
+	/*
+	 * Capability bits:
+	 * Bit 0: set to 1 to indicate DPTF is active
+	 * Bi1 1: set to 1 to active cooling is supported by user space daemon
+	 * Bit 2: set to 1 to passive cooling is supported by user space daemon
+	 * Bit 3: set to 1 to critical trip is handled by user space daemon
+	 */
+	if (mask)
+		cap = (priv->os_uuid_mask << 1) | 0x01;
+
+	return int3400_thermal_run_osc(priv->adev->handle,
+				       "b23ba85d-c8b7-3542-88de-8de2ffcfd698",
+				       &cap);
+}
+
+static ssize_t current_uuid_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
+	int ret, i;
+
+	for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; ++i) {
+		if (!strncmp(buf, int3400_thermal_uuids[i],
+			     sizeof(int3400_thermal_uuids[i]) - 1)) {
+			/*
+			 * If we have a list of supported UUIDs, make sure
+			 * this one is supported.
+			 */
+			if (priv->uuid_bitmap & BIT(i)) {
+				priv->current_uuid_index = i;
+				return count;
+			}
+
+			/*
+			 * There is support of only 3 policies via the new
+			 * _OSC to inform OS capability:
+			 * INT3400_THERMAL_ACTIVE
+			 * INT3400_THERMAL_PASSIVE_1
+			 * INT3400_THERMAL_CRITICAL
+			 */
+
+			if (i > INT3400_THERMAL_CRITICAL)
+				return -EINVAL;
+
+			priv->os_uuid_mask |= BIT(i);
+
+			break;
+		}
+	}
+
+	if (priv->os_uuid_mask) {
+		ret = set_os_uuid_mask(priv, priv->os_uuid_mask);
+		if (ret)
+			return ret;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(current_uuid);
+static DEVICE_ATTR_RO(available_uuids);
+static struct attribute *uuid_attrs[] = {
+	&dev_attr_available_uuids.attr,
+	&dev_attr_current_uuid.attr,
+	NULL
+};
+
+static const struct attribute_group uuid_attribute_group = {
+	.attrs = uuid_attrs,
+	.name = "uuids"
+};
+
+static int int3400_thermal_get_uuids(struct int3400_thermal_priv *priv)
+{
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *obja, *objb;
+	int i, j;
+	int result = 0;
+	acpi_status status;
+
+	status = acpi_evaluate_object(priv->adev->handle, "IDSP", NULL, &buf);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	obja = (union acpi_object *)buf.pointer;
+	if (obja->type != ACPI_TYPE_PACKAGE) {
+		result = -EINVAL;
+		goto end;
+	}
+
+	for (i = 0; i < obja->package.count; i++) {
+		objb = &obja->package.elements[i];
+		if (objb->type != ACPI_TYPE_BUFFER) {
+			result = -EINVAL;
+			goto end;
+		}
+
+		/* UUID must be 16 bytes */
+		if (objb->buffer.length != 16) {
+			result = -EINVAL;
+			goto end;
+		}
+
+		for (j = 0; j < INT3400_THERMAL_MAXIMUM_UUID; j++) {
+			guid_t guid;
+
+			guid_parse(int3400_thermal_uuids[j], &guid);
+			if (guid_equal((guid_t *)objb->buffer.pointer, &guid)) {
+				priv->uuid_bitmap |= (1 << j);
+				break;
+			}
+		}
+	}
+
+end:
+	kfree(buf.pointer);
+	return result;
+}
+
+static ssize_t odvp_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct odvp_attr *odvp_attr;
+
+	odvp_attr = container_of(attr, struct odvp_attr, attr);
+
+	return sprintf(buf, "%d\n", odvp_attr->priv->odvp[odvp_attr->odvp]);
+}
+
+static void cleanup_odvp(struct int3400_thermal_priv *priv)
+{
+	int i;
+
+	if (priv->odvp_attrs) {
+		for (i = 0; i < priv->odvp_count; i++) {
+			sysfs_remove_file(&priv->pdev->dev.kobj,
+					  &priv->odvp_attrs[i].attr.attr);
+			kfree(priv->odvp_attrs[i].attr.attr.name);
+		}
+		kfree(priv->odvp_attrs);
+	}
+	kfree(priv->odvp);
+	priv->odvp_count = 0;
+}
+
+static int evaluate_odvp(struct int3400_thermal_priv *priv)
+{
+	struct acpi_buffer odvp = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj = NULL;
+	acpi_status status;
+	int i, ret;
+
+	status = acpi_evaluate_object(priv->adev->handle, "ODVP", NULL, &odvp);
+	if (ACPI_FAILURE(status)) {
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+	obj = odvp.pointer;
+	if (obj->type != ACPI_TYPE_PACKAGE) {
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+	if (priv->odvp == NULL) {
+		priv->odvp_count = obj->package.count;
+		priv->odvp = kmalloc_array(priv->odvp_count, sizeof(int),
+				     GFP_KERNEL);
+		if (!priv->odvp) {
+			ret = -ENOMEM;
+			goto out_err;
+		}
+	}
+
+	if (priv->odvp_attrs == NULL) {
+		priv->odvp_attrs = kcalloc(priv->odvp_count,
+					   sizeof(struct odvp_attr),
+					   GFP_KERNEL);
+		if (!priv->odvp_attrs) {
+			ret = -ENOMEM;
+			goto out_err;
+		}
+		for (i = 0; i < priv->odvp_count; i++) {
+			struct odvp_attr *odvp = &priv->odvp_attrs[i];
+
+			sysfs_attr_init(&odvp->attr.attr);
+			odvp->priv = priv;
+			odvp->odvp = i;
+			odvp->attr.attr.name = kasprintf(GFP_KERNEL,
+							 "odvp%d", i);
+
+			if (!odvp->attr.attr.name) {
+				ret = -ENOMEM;
+				goto out_err;
+			}
+			odvp->attr.attr.mode = 0444;
+			odvp->attr.show = odvp_show;
+			odvp->attr.store = NULL;
+			ret = sysfs_create_file(&priv->pdev->dev.kobj,
+						&odvp->attr.attr);
+			if (ret)
+				goto out_err;
+		}
+	}
+
+	for (i = 0; i < obj->package.count; i++) {
+		if (obj->package.elements[i].type == ACPI_TYPE_INTEGER)
+			priv->odvp[i] = obj->package.elements[i].integer.value;
+	}
+
+	kfree(obj);
+	return 0;
+
+out_err:
+	cleanup_odvp(priv);
+	kfree(obj);
+	return ret;
+}
+
+static void int3400_notify(acpi_handle handle,
+			u32 event,
+			void *data)
+{
+	struct int3400_thermal_priv *priv = data;
+	char *thermal_prop[5];
+	int therm_event;
+
+	if (!priv)
+		return;
+
+	switch (event) {
+	case INT3400_THERMAL_TABLE_CHANGED:
+		therm_event = THERMAL_TABLE_CHANGED;
+		break;
+	case INT3400_KEEP_ALIVE:
+		therm_event = THERMAL_EVENT_KEEP_ALIVE;
+		break;
+	case INT3400_ODVP_CHANGED:
+		evaluate_odvp(priv);
+		therm_event = THERMAL_DEVICE_POWER_CAPABILITY_CHANGED;
+		break;
+	default:
+		/* Ignore unknown notification codes sent to INT3400 device */
+		return;
+	}
+
+	thermal_prop[0] = kasprintf(GFP_KERNEL, "NAME=%s", priv->thermal->type);
+	thermal_prop[1] = kasprintf(GFP_KERNEL, "TEMP=%d", priv->thermal->temperature);
+	thermal_prop[2] = kasprintf(GFP_KERNEL, "TRIP=");
+	thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", therm_event);
+	thermal_prop[4] = NULL;
+	kobject_uevent_env(&priv->thermal->device.kobj, KOBJ_CHANGE, thermal_prop);
+	kfree(thermal_prop[0]);
+	kfree(thermal_prop[1]);
+	kfree(thermal_prop[2]);
+	kfree(thermal_prop[3]);
+}
+
+static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
+			int *temp)
+{
+	*temp = 20 * 1000; /* faked temp sensor with 20C */
+	return 0;
+}
+
+static int int3400_thermal_change_mode(struct thermal_zone_device *thermal,
+				       enum thermal_device_mode mode)
+{
+	struct int3400_thermal_priv *priv = thermal->devdata;
+	int result = 0;
+
+	if (!priv)
+		return -EINVAL;
+
+	if (mode != thermal->mode) {
+		int enabled;
+
+		enabled = mode == THERMAL_DEVICE_ENABLED;
+
+		if (priv->os_uuid_mask) {
+			if (!enabled) {
+				priv->os_uuid_mask = 0;
+				result = set_os_uuid_mask(priv, priv->os_uuid_mask);
+			}
+			goto eval_odvp;
+		}
+
+		if (priv->current_uuid_index < 0 ||
+		    priv->current_uuid_index >= INT3400_THERMAL_MAXIMUM_UUID)
+			return -EINVAL;
+
+		result = int3400_thermal_run_osc(priv->adev->handle,
+						 int3400_thermal_uuids[priv->current_uuid_index],
+						 &enabled);
+	}
+
+eval_odvp:
+	evaluate_odvp(priv);
+
+	return result;
+}
+
+static struct thermal_zone_device_ops int3400_thermal_ops = {
+	.get_temp = int3400_thermal_get_temp,
+	.change_mode = int3400_thermal_change_mode,
+};
+
+static struct thermal_zone_params int3400_thermal_params = {
+	.governor_name = "user_space",
+	.no_hwmon = true,
+};
+
+static void int3400_setup_gddv(struct int3400_thermal_priv *priv)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	acpi_status status;
+
+	status = acpi_evaluate_object(priv->adev->handle, "GDDV", NULL,
+				      &buffer);
+	if (ACPI_FAILURE(status) || !buffer.length)
+		return;
+
+	obj = buffer.pointer;
+	if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 1
+	    || obj->package.elements[0].type != ACPI_TYPE_BUFFER)
+		goto out_free;
+
+	priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer,
+				   obj->package.elements[0].buffer.length,
+				   GFP_KERNEL);
+	if (ZERO_OR_NULL_PTR(priv->data_vault))
+		goto out_free;
+
+	bin_attr_data_vault.private = priv->data_vault;
+	bin_attr_data_vault.size = obj->package.elements[0].buffer.length;
+out_free:
+	kfree(buffer.pointer);
+}
+
+static int int3400_thermal_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	struct int3400_thermal_priv *priv;
+	int result;
+
+	if (!adev)
+		return -ENODEV;
+
+	priv = kzalloc(sizeof(struct int3400_thermal_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pdev = pdev;
+	priv->adev = adev;
+
+	result = int3400_thermal_get_uuids(priv);
+
+	/* Missing IDSP isn't fatal */
+	if (result && result != -ENODEV)
+		goto free_priv;
+
+	priv->current_uuid_index = -1;
+
+	result = acpi_parse_art(priv->adev->handle, &priv->art_count,
+				&priv->arts, true);
+	if (result)
+		dev_dbg(&pdev->dev, "_ART table parsing error\n");
+
+	result = acpi_parse_trt(priv->adev->handle, &priv->trt_count,
+				&priv->trts, true);
+	if (result)
+		dev_dbg(&pdev->dev, "_TRT table parsing error\n");
+
+	platform_set_drvdata(pdev, priv);
+
+	int3400_setup_gddv(priv);
+
+	evaluate_odvp(priv);
+
+	priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0,
+						priv, &int3400_thermal_ops,
+						&int3400_thermal_params, 0, 0);
+	if (IS_ERR(priv->thermal)) {
+		result = PTR_ERR(priv->thermal);
+		goto free_art_trt;
+	}
+
+	priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add(
+							priv->adev->handle);
+
+	result = sysfs_create_group(&pdev->dev.kobj, &uuid_attribute_group);
+	if (result)
+		goto free_rel_misc;
+
+	if (acpi_has_method(priv->adev->handle, "IMOK")) {
+		result = sysfs_create_group(&pdev->dev.kobj, &imok_attribute_group);
+		if (result)
+			goto free_imok;
+	}
+
+	if (!ZERO_OR_NULL_PTR(priv->data_vault)) {
+		result = sysfs_create_group(&pdev->dev.kobj,
+					    &data_attribute_group);
+		if (result)
+			goto free_uuid;
+	}
+
+	result = acpi_install_notify_handler(
+			priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify,
+			(void *)priv);
+	if (result)
+		goto free_sysfs;
+
+	return 0;
+
+free_sysfs:
+	cleanup_odvp(priv);
+	if (!ZERO_OR_NULL_PTR(priv->data_vault)) {
+		sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group);
+		kfree(priv->data_vault);
+	}
+free_uuid:
+	sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
+free_imok:
+	sysfs_remove_group(&pdev->dev.kobj, &imok_attribute_group);
+free_rel_misc:
+	if (!priv->rel_misc_dev_res)
+		acpi_thermal_rel_misc_device_remove(priv->adev->handle);
+	thermal_zone_device_unregister(priv->thermal);
+free_art_trt:
+	kfree(priv->trts);
+	kfree(priv->arts);
+free_priv:
+	kfree(priv);
+	return result;
+}
+
+static int int3400_thermal_remove(struct platform_device *pdev)
+{
+	struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+
+	acpi_remove_notify_handler(
+			priv->adev->handle, ACPI_DEVICE_NOTIFY,
+			int3400_notify);
+
+	cleanup_odvp(priv);
+
+	if (!priv->rel_misc_dev_res)
+		acpi_thermal_rel_misc_device_remove(priv->adev->handle);
+
+	if (!ZERO_OR_NULL_PTR(priv->data_vault))
+		sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group);
+	sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
+	sysfs_remove_group(&pdev->dev.kobj, &imok_attribute_group);
+	thermal_zone_device_unregister(priv->thermal);
+	kfree(priv->data_vault);
+	kfree(priv->trts);
+	kfree(priv->arts);
+	kfree(priv);
+	return 0;
+}
+
+static const struct acpi_device_id int3400_thermal_match[] = {
+	{"INT3400", 0},
+	{"INTC1040", 0},
+	{"INTC1041", 0},
+	{"INTC1042", 0},
+	{"INTC10A0", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3400_thermal_match);
+
+static struct platform_driver int3400_thermal_driver = {
+	.probe = int3400_thermal_probe,
+	.remove = int3400_thermal_remove,
+	.driver = {
+		   .name = "int3400 thermal",
+		   .acpi_match_table = ACPI_PTR(int3400_thermal_match),
+		   },
+};
+
+module_platform_driver(int3400_thermal_driver);
+
+MODULE_DESCRIPTION("INT3400 Thermal driver");
+MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/intel/int340x_thermal/int3401_thermal.c b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
new file mode 100644
index 000000000..217786fba
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3401 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+
+static const struct acpi_device_id int3401_device_ids[] = {
+	{"INT3401", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static int int3401_add(struct platform_device *pdev)
+{
+	struct proc_thermal_device *proc_priv;
+	int ret;
+
+	proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+	if (!proc_priv)
+		return -ENOMEM;
+
+	ret = proc_thermal_add(&pdev->dev, proc_priv);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, proc_priv);
+
+	return ret;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+	proc_thermal_remove(platform_get_drvdata(pdev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int int3401_thermal_suspend(struct device *dev)
+{
+	return proc_thermal_suspend(dev);
+}
+static int int3401_thermal_resume(struct device *dev)
+{
+	return proc_thermal_resume(dev);
+}
+#else
+#define int3401_thermal_suspend NULL
+#define int3401_thermal_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(int3401_proc_thermal_pm, int3401_thermal_suspend,
+			 int3401_thermal_resume);
+
+static struct platform_driver int3401_driver = {
+	.probe = int3401_add,
+	.remove = int3401_remove,
+	.driver = {
+		.name = "int3401 thermal",
+		.acpi_match_table = int3401_device_ids,
+		.pm = &int3401_proc_thermal_pm,
+	},
+};
+
+static int __init proc_thermal_init(void)
+{
+	return platform_driver_register(&int3401_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+	platform_driver_unregister(&int3401_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/int3402_thermal.c b/drivers/thermal/intel/int340x_thermal/int3402_thermal.c
new file mode 100644
index 000000000..43fa351e2
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3402_thermal.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3402 thermal driver for memory temperature reporting
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Aaron Lu <aaron.lu@intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include "int340x_thermal_zone.h"
+
+#define INT3402_PERF_CHANGED_EVENT	0x80
+#define INT3402_THERMAL_EVENT		0x90
+
+struct int3402_thermal_data {
+	acpi_handle *handle;
+	struct int34x_thermal_zone *int340x_zone;
+};
+
+static void int3402_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct int3402_thermal_data *priv = data;
+
+	if (!priv)
+		return;
+
+	switch (event) {
+	case INT3402_PERF_CHANGED_EVENT:
+		break;
+	case INT3402_THERMAL_EVENT:
+		int340x_thermal_zone_device_update(priv->int340x_zone,
+						   THERMAL_TRIP_VIOLATED);
+		break;
+	default:
+		break;
+	}
+}
+
+static int int3402_thermal_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	struct int3402_thermal_data *d;
+	int ret;
+
+	if (!acpi_has_method(adev->handle, "_TMP"))
+		return -ENODEV;
+
+	d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	d->int340x_zone = int340x_thermal_zone_add(adev, NULL);
+	if (IS_ERR(d->int340x_zone))
+		return PTR_ERR(d->int340x_zone);
+
+	ret = acpi_install_notify_handler(adev->handle,
+					  ACPI_DEVICE_NOTIFY,
+					  int3402_notify,
+					  d);
+	if (ret) {
+		int340x_thermal_zone_remove(d->int340x_zone);
+		return ret;
+	}
+
+	d->handle = adev->handle;
+	platform_set_drvdata(pdev, d);
+
+	return 0;
+}
+
+static int int3402_thermal_remove(struct platform_device *pdev)
+{
+	struct int3402_thermal_data *d = platform_get_drvdata(pdev);
+
+	acpi_remove_notify_handler(d->handle,
+				   ACPI_DEVICE_NOTIFY, int3402_notify);
+	int340x_thermal_zone_remove(d->int340x_zone);
+
+	return 0;
+}
+
+static const struct acpi_device_id int3402_thermal_match[] = {
+	{"INT3402", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3402_thermal_match);
+
+static struct platform_driver int3402_thermal_driver = {
+	.probe = int3402_thermal_probe,
+	.remove = int3402_thermal_remove,
+	.driver = {
+		   .name = "int3402 thermal",
+		   .acpi_match_table = int3402_thermal_match,
+		   },
+};
+
+module_platform_driver(int3402_thermal_driver);
+
+MODULE_DESCRIPTION("INT3402 Thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c
new file mode 100644
index 000000000..71d084c4c
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI INT3403 thermal driver
+ * Copyright (c) 2013, Intel Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include "int340x_thermal_zone.h"
+
+#define INT3403_TYPE_SENSOR		0x03
+#define INT3403_TYPE_CHARGER		0x0B
+#define INT3403_TYPE_BATTERY		0x0C
+#define INT3403_PERF_CHANGED_EVENT	0x80
+#define INT3403_PERF_TRIP_POINT_CHANGED	0x81
+#define INT3403_THERMAL_EVENT		0x90
+
+/* Preserved structure for future expandbility */
+struct int3403_sensor {
+	struct int34x_thermal_zone *int340x_zone;
+};
+
+struct int3403_performance_state {
+	u64 performance;
+	u64 power;
+	u64 latency;
+	u64 linear;
+	u64 control;
+	u64 raw_performace;
+	char *raw_unit;
+	int reserved;
+};
+
+struct int3403_cdev {
+	struct thermal_cooling_device *cdev;
+	unsigned long max_state;
+};
+
+struct int3403_priv {
+	struct platform_device *pdev;
+	struct acpi_device *adev;
+	unsigned long long type;
+	void *priv;
+};
+
+static void int3403_notify(acpi_handle handle,
+		u32 event, void *data)
+{
+	struct int3403_priv *priv = data;
+	struct int3403_sensor *obj;
+
+	if (!priv)
+		return;
+
+	obj = priv->priv;
+	if (priv->type != INT3403_TYPE_SENSOR || !obj)
+		return;
+
+	switch (event) {
+	case INT3403_PERF_CHANGED_EVENT:
+		break;
+	case INT3403_THERMAL_EVENT:
+		int340x_thermal_zone_device_update(obj->int340x_zone,
+						   THERMAL_TRIP_VIOLATED);
+		break;
+	case INT3403_PERF_TRIP_POINT_CHANGED:
+		int340x_thermal_read_trips(obj->int340x_zone);
+		int340x_thermal_zone_device_update(obj->int340x_zone,
+						   THERMAL_TRIP_CHANGED);
+		break;
+	default:
+		dev_dbg(&priv->pdev->dev, "Unsupported event [0x%x]\n", event);
+		break;
+	}
+}
+
+static int int3403_sensor_add(struct int3403_priv *priv)
+{
+	int result = 0;
+	struct int3403_sensor *obj;
+
+	obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	priv->priv = obj;
+
+	obj->int340x_zone = int340x_thermal_zone_add(priv->adev, NULL);
+	if (IS_ERR(obj->int340x_zone))
+		return PTR_ERR(obj->int340x_zone);
+
+	result = acpi_install_notify_handler(priv->adev->handle,
+			ACPI_DEVICE_NOTIFY, int3403_notify,
+			(void *)priv);
+	if (result)
+		goto err_free_obj;
+
+	return 0;
+
+ err_free_obj:
+	int340x_thermal_zone_remove(obj->int340x_zone);
+	return result;
+}
+
+static int int3403_sensor_remove(struct int3403_priv *priv)
+{
+	struct int3403_sensor *obj = priv->priv;
+
+	acpi_remove_notify_handler(priv->adev->handle,
+				   ACPI_DEVICE_NOTIFY, int3403_notify);
+	int340x_thermal_zone_remove(obj->int340x_zone);
+
+	return 0;
+}
+
+/* INT3403 Cooling devices */
+static int int3403_get_max_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	struct int3403_priv *priv = cdev->devdata;
+	struct int3403_cdev *obj = priv->priv;
+
+	*state = obj->max_state;
+	return 0;
+}
+
+static int int3403_get_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	struct int3403_priv *priv = cdev->devdata;
+	unsigned long long level;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(priv->adev->handle, "PPPC", NULL, &level);
+	if (ACPI_SUCCESS(status)) {
+		*state = level;
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int
+int3403_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+{
+	struct int3403_priv *priv = cdev->devdata;
+	acpi_status status;
+
+	status = acpi_execute_simple_method(priv->adev->handle, "SPPC", state);
+	if (ACPI_SUCCESS(status))
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static const struct thermal_cooling_device_ops int3403_cooling_ops = {
+	.get_max_state = int3403_get_max_state,
+	.get_cur_state = int3403_get_cur_state,
+	.set_cur_state = int3403_set_cur_state,
+};
+
+static int int3403_cdev_add(struct int3403_priv *priv)
+{
+	int result = 0;
+	acpi_status status;
+	struct int3403_cdev *obj;
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *p;
+
+	obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	status = acpi_evaluate_object(priv->adev->handle, "PPSS", NULL, &buf);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	p = buf.pointer;
+	if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+		pr_warn("Invalid PPSS data\n");
+		kfree(buf.pointer);
+		return -EFAULT;
+	}
+
+	priv->priv = obj;
+	obj->max_state = p->package.count - 1;
+	obj->cdev =
+		thermal_cooling_device_register(acpi_device_bid(priv->adev),
+				priv, &int3403_cooling_ops);
+	if (IS_ERR(obj->cdev))
+		result = PTR_ERR(obj->cdev);
+
+	kfree(buf.pointer);
+	/* TODO: add ACPI notification support */
+
+	return result;
+}
+
+static int int3403_cdev_remove(struct int3403_priv *priv)
+{
+	struct int3403_cdev *obj = priv->priv;
+
+	thermal_cooling_device_unregister(obj->cdev);
+	return 0;
+}
+
+static int int3403_add(struct platform_device *pdev)
+{
+	struct int3403_priv *priv;
+	int result = 0;
+	unsigned long long tmp;
+	acpi_status status;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct int3403_priv),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pdev = pdev;
+	priv->adev = ACPI_COMPANION(&(pdev->dev));
+	if (!priv->adev) {
+		result = -EINVAL;
+		goto err;
+	}
+
+
+	status = acpi_evaluate_integer(priv->adev->handle, "_TMP",
+				       NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
+				       NULL, &priv->type);
+		if (ACPI_FAILURE(status)) {
+			result = -EINVAL;
+			goto err;
+		}
+	} else {
+		priv->type = INT3403_TYPE_SENSOR;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	switch (priv->type) {
+	case INT3403_TYPE_SENSOR:
+		result = int3403_sensor_add(priv);
+		break;
+	case INT3403_TYPE_CHARGER:
+	case INT3403_TYPE_BATTERY:
+		result = int3403_cdev_add(priv);
+		break;
+	default:
+		result = -EINVAL;
+	}
+
+	if (result)
+		goto err;
+	return result;
+
+err:
+	return result;
+}
+
+static int int3403_remove(struct platform_device *pdev)
+{
+	struct int3403_priv *priv = platform_get_drvdata(pdev);
+
+	switch (priv->type) {
+	case INT3403_TYPE_SENSOR:
+		int3403_sensor_remove(priv);
+		break;
+	case INT3403_TYPE_CHARGER:
+	case INT3403_TYPE_BATTERY:
+		int3403_cdev_remove(priv);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static const struct acpi_device_id int3403_device_ids[] = {
+	{"INT3403", 0},
+	{"INTC1043", 0},
+	{"INTC1046", 0},
+	{"INTC1062", 0},
+	{"INTC10A1", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3403_device_ids);
+
+static struct platform_driver int3403_driver = {
+	.probe = int3403_add,
+	.remove = int3403_remove,
+	.driver = {
+		.name = "int3403 thermal",
+		.acpi_match_table = int3403_device_ids,
+	},
+};
+
+module_platform_driver(int3403_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ACPI INT3403 thermal driver");
diff --git a/drivers/thermal/intel/int340x_thermal/int3406_thermal.c b/drivers/thermal/intel/int340x_thermal/int3406_thermal.c
new file mode 100644
index 000000000..f5e42fc2a
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3406_thermal.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3406 thermal driver for display participant device
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Authors: Aaron Lu <aaron.lu@intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/backlight.h>
+#include <linux/thermal.h>
+#include <acpi/video.h>
+
+#define INT3406_BRIGHTNESS_LIMITS_CHANGED	0x80
+
+struct int3406_thermal_data {
+	int upper_limit;
+	int lower_limit;
+	acpi_handle handle;
+	struct acpi_video_device_brightness *br;
+	struct backlight_device *raw_bd;
+	struct thermal_cooling_device *cooling_dev;
+};
+
+/*
+ * According to the ACPI spec,
+ * "Each brightness level is represented by a number between 0 and 100,
+ * and can be thought of as a percentage. For example, 50 can be 50%
+ * power consumption or 50% brightness, as defined by the OEM."
+ *
+ * As int3406 device uses this value to communicate with the native
+ * graphics driver, we make the assumption that it represents
+ * the percentage of brightness only
+ */
+#define ACPI_TO_RAW(v, d) (d->raw_bd->props.max_brightness * v / 100)
+#define RAW_TO_ACPI(v, d) (v * 100 / d->raw_bd->props.max_brightness)
+
+static int
+int3406_thermal_get_max_state(struct thermal_cooling_device *cooling_dev,
+			      unsigned long *state)
+{
+	struct int3406_thermal_data *d = cooling_dev->devdata;
+
+	*state = d->upper_limit - d->lower_limit;
+	return 0;
+}
+
+static int
+int3406_thermal_set_cur_state(struct thermal_cooling_device *cooling_dev,
+			      unsigned long state)
+{
+	struct int3406_thermal_data *d = cooling_dev->devdata;
+	int acpi_level, raw_level;
+
+	if (state > d->upper_limit - d->lower_limit)
+		return -EINVAL;
+
+	acpi_level = d->br->levels[d->upper_limit - state];
+
+	raw_level = ACPI_TO_RAW(acpi_level, d);
+
+	return backlight_device_set_brightness(d->raw_bd, raw_level);
+}
+
+static int
+int3406_thermal_get_cur_state(struct thermal_cooling_device *cooling_dev,
+			      unsigned long *state)
+{
+	struct int3406_thermal_data *d = cooling_dev->devdata;
+	int acpi_level;
+	int index;
+
+	acpi_level = RAW_TO_ACPI(d->raw_bd->props.brightness, d);
+
+	/*
+	 * There is no 1:1 mapping between the firmware interface level
+	 * with the raw interface level, we will have to find one that is
+	 * right above it.
+	 */
+	for (index = d->lower_limit; index < d->upper_limit; index++) {
+		if (acpi_level <= d->br->levels[index])
+			break;
+	}
+
+	*state = d->upper_limit - index;
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops video_cooling_ops = {
+	.get_max_state = int3406_thermal_get_max_state,
+	.get_cur_state = int3406_thermal_get_cur_state,
+	.set_cur_state = int3406_thermal_set_cur_state,
+};
+
+static int int3406_thermal_get_index(int *array, int nr, int value)
+{
+	int i;
+
+	for (i = 2; i < nr; i++) {
+		if (array[i] == value)
+			break;
+	}
+	return i == nr ? -ENOENT : i;
+}
+
+static void int3406_thermal_get_limit(struct int3406_thermal_data *d)
+{
+	acpi_status status;
+	unsigned long long lower_limit, upper_limit;
+
+	status = acpi_evaluate_integer(d->handle, "DDDL", NULL, &lower_limit);
+	if (ACPI_SUCCESS(status))
+		d->lower_limit = int3406_thermal_get_index(d->br->levels,
+					d->br->count, lower_limit);
+
+	status = acpi_evaluate_integer(d->handle, "DDPC", NULL, &upper_limit);
+	if (ACPI_SUCCESS(status))
+		d->upper_limit = int3406_thermal_get_index(d->br->levels,
+					d->br->count, upper_limit);
+
+	/* lower_limit and upper_limit should be always set */
+	d->lower_limit = d->lower_limit > 0 ? d->lower_limit : 2;
+	d->upper_limit = d->upper_limit > 0 ? d->upper_limit : d->br->count - 1;
+}
+
+static void int3406_notify(acpi_handle handle, u32 event, void *data)
+{
+	if (event == INT3406_BRIGHTNESS_LIMITS_CHANGED)
+		int3406_thermal_get_limit(data);
+}
+
+static int int3406_thermal_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	struct int3406_thermal_data *d;
+	struct backlight_device *bd;
+	int ret;
+
+	if (!ACPI_HANDLE(&pdev->dev))
+		return -ENODEV;
+
+	d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+	d->handle = ACPI_HANDLE(&pdev->dev);
+
+	bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+	if (!bd)
+		return -ENODEV;
+	d->raw_bd = bd;
+
+	ret = acpi_video_get_levels(ACPI_COMPANION(&pdev->dev), &d->br, NULL);
+	if (ret)
+		return ret;
+
+	int3406_thermal_get_limit(d);
+
+	d->cooling_dev = thermal_cooling_device_register(acpi_device_bid(adev),
+							 d, &video_cooling_ops);
+	if (IS_ERR(d->cooling_dev))
+		goto err;
+
+	ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY,
+					  int3406_notify, d);
+	if (ret)
+		goto err_cdev;
+
+	platform_set_drvdata(pdev, d);
+
+	return 0;
+
+err_cdev:
+	thermal_cooling_device_unregister(d->cooling_dev);
+err:
+	kfree(d->br);
+	return -ENODEV;
+}
+
+static int int3406_thermal_remove(struct platform_device *pdev)
+{
+	struct int3406_thermal_data *d = platform_get_drvdata(pdev);
+
+	thermal_cooling_device_unregister(d->cooling_dev);
+	kfree(d->br);
+	return 0;
+}
+
+static const struct acpi_device_id int3406_thermal_match[] = {
+	{"INT3406", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3406_thermal_match);
+
+static struct platform_driver int3406_thermal_driver = {
+	.probe = int3406_thermal_probe,
+	.remove = int3406_thermal_remove,
+	.driver = {
+		   .name = "int3406 thermal",
+		   .acpi_match_table = int3406_thermal_match,
+		   },
+};
+
+module_platform_driver(int3406_thermal_driver);
+
+MODULE_DESCRIPTION("INT3406 Thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
new file mode 100644
index 000000000..0a4eaa307
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * int340x_thermal_zone.c
+ * Copyright (c) 2015, Intel Corporation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+#include "int340x_thermal_zone.h"
+
+static int int340x_thermal_get_zone_temp(struct thermal_zone_device *zone,
+					 int *temp)
+{
+	struct int34x_thermal_zone *d = zone->devdata;
+	unsigned long long tmp;
+	acpi_status status;
+
+	if (d->override_ops && d->override_ops->get_temp)
+		return d->override_ops->get_temp(zone, temp);
+
+	status = acpi_evaluate_integer(d->adev->handle, "_TMP", NULL, &tmp);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	if (d->lpat_table) {
+		int conv_temp;
+
+		conv_temp = acpi_lpat_raw_to_temp(d->lpat_table, (int)tmp);
+		if (conv_temp < 0)
+			return conv_temp;
+
+		*temp = (unsigned long)conv_temp * 10;
+	} else
+		/* _TMP returns the temperature in tenths of degrees Kelvin */
+		*temp = deci_kelvin_to_millicelsius(tmp);
+
+	return 0;
+}
+
+static int int340x_thermal_get_trip_temp(struct thermal_zone_device *zone,
+					 int trip, int *temp)
+{
+	struct int34x_thermal_zone *d = zone->devdata;
+	int i, ret = 0;
+
+	if (d->override_ops && d->override_ops->get_trip_temp)
+		return d->override_ops->get_trip_temp(zone, trip, temp);
+
+	mutex_lock(&d->trip_mutex);
+
+	if (trip < d->aux_trip_nr)
+		*temp = d->aux_trips[trip];
+	else if (trip == d->crt_trip_id)
+		*temp = d->crt_temp;
+	else if (trip == d->psv_trip_id)
+		*temp = d->psv_temp;
+	else if (trip == d->hot_trip_id)
+		*temp = d->hot_temp;
+	else {
+		for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) {
+			if (d->act_trips[i].valid &&
+			    d->act_trips[i].id == trip) {
+				*temp = d->act_trips[i].temp;
+				break;
+			}
+		}
+		if (i == INT340X_THERMAL_MAX_ACT_TRIP_COUNT)
+			ret = -EINVAL;
+	}
+
+	mutex_unlock(&d->trip_mutex);
+
+	return ret;
+}
+
+static int int340x_thermal_get_trip_type(struct thermal_zone_device *zone,
+					 int trip,
+					 enum thermal_trip_type *type)
+{
+	struct int34x_thermal_zone *d = zone->devdata;
+	int i, ret = 0;
+
+	if (d->override_ops && d->override_ops->get_trip_type)
+		return d->override_ops->get_trip_type(zone, trip, type);
+
+	mutex_lock(&d->trip_mutex);
+
+	if (trip < d->aux_trip_nr)
+		*type = THERMAL_TRIP_PASSIVE;
+	else if (trip == d->crt_trip_id)
+		*type = THERMAL_TRIP_CRITICAL;
+	else if (trip == d->hot_trip_id)
+		*type = THERMAL_TRIP_HOT;
+	else if (trip == d->psv_trip_id)
+		*type = THERMAL_TRIP_PASSIVE;
+	else {
+		for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) {
+			if (d->act_trips[i].valid &&
+			    d->act_trips[i].id == trip) {
+				*type = THERMAL_TRIP_ACTIVE;
+				break;
+			}
+		}
+		if (i == INT340X_THERMAL_MAX_ACT_TRIP_COUNT)
+			ret = -EINVAL;
+	}
+
+	mutex_unlock(&d->trip_mutex);
+
+	return ret;
+}
+
+static int int340x_thermal_set_trip_temp(struct thermal_zone_device *zone,
+				      int trip, int temp)
+{
+	struct int34x_thermal_zone *d = zone->devdata;
+	acpi_status status;
+	char name[10];
+
+	if (d->override_ops && d->override_ops->set_trip_temp)
+		return d->override_ops->set_trip_temp(zone, trip, temp);
+
+	snprintf(name, sizeof(name), "PAT%d", trip);
+	status = acpi_execute_simple_method(d->adev->handle, name,
+			millicelsius_to_deci_kelvin(temp));
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	d->aux_trips[trip] = temp;
+
+	return 0;
+}
+
+
+static int int340x_thermal_get_trip_hyst(struct thermal_zone_device *zone,
+		int trip, int *temp)
+{
+	struct int34x_thermal_zone *d = zone->devdata;
+	acpi_status status;
+	unsigned long long hyst;
+
+	if (d->override_ops && d->override_ops->get_trip_hyst)
+		return d->override_ops->get_trip_hyst(zone, trip, temp);
+
+	status = acpi_evaluate_integer(d->adev->handle, "GTSH", NULL, &hyst);
+	if (ACPI_FAILURE(status))
+		*temp = 0;
+	else
+		*temp = hyst * 100;
+
+	return 0;
+}
+
+static void int340x_thermal_critical(struct thermal_zone_device *zone)
+{
+	dev_dbg(&zone->device, "%s: critical temperature reached\n", zone->type);
+}
+
+static struct thermal_zone_device_ops int340x_thermal_zone_ops = {
+	.get_temp       = int340x_thermal_get_zone_temp,
+	.get_trip_temp	= int340x_thermal_get_trip_temp,
+	.get_trip_type	= int340x_thermal_get_trip_type,
+	.set_trip_temp	= int340x_thermal_set_trip_temp,
+	.get_trip_hyst =  int340x_thermal_get_trip_hyst,
+	.critical	= int340x_thermal_critical,
+};
+
+static int int340x_thermal_get_trip_config(acpi_handle handle, char *name,
+				      int *temp)
+{
+	unsigned long long r;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(handle, name, NULL, &r);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	*temp = deci_kelvin_to_millicelsius(r);
+
+	return 0;
+}
+
+int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone)
+{
+	int trip_cnt = int34x_zone->aux_trip_nr;
+	int i;
+
+	mutex_lock(&int34x_zone->trip_mutex);
+
+	int34x_zone->crt_trip_id = -1;
+	if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_CRT",
+					     &int34x_zone->crt_temp))
+		int34x_zone->crt_trip_id = trip_cnt++;
+
+	int34x_zone->hot_trip_id = -1;
+	if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_HOT",
+					     &int34x_zone->hot_temp))
+		int34x_zone->hot_trip_id = trip_cnt++;
+
+	int34x_zone->psv_trip_id = -1;
+	if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_PSV",
+					     &int34x_zone->psv_temp))
+		int34x_zone->psv_trip_id = trip_cnt++;
+
+	for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) {
+		char name[5] = { '_', 'A', 'C', '0' + i, '\0' };
+
+		if (int340x_thermal_get_trip_config(int34x_zone->adev->handle,
+					name,
+					&int34x_zone->act_trips[i].temp))
+			break;
+
+		int34x_zone->act_trips[i].id = trip_cnt++;
+		int34x_zone->act_trips[i].valid = true;
+	}
+
+	mutex_unlock(&int34x_zone->trip_mutex);
+
+	return trip_cnt;
+}
+EXPORT_SYMBOL_GPL(int340x_thermal_read_trips);
+
+static struct thermal_zone_params int340x_thermal_params = {
+	.governor_name = "user_space",
+	.no_hwmon = true,
+};
+
+struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
+				struct thermal_zone_device_ops *override_ops)
+{
+	struct int34x_thermal_zone *int34x_thermal_zone;
+	acpi_status status;
+	unsigned long long trip_cnt;
+	int trip_mask = 0;
+	int ret;
+
+	int34x_thermal_zone = kzalloc(sizeof(*int34x_thermal_zone),
+				      GFP_KERNEL);
+	if (!int34x_thermal_zone)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&int34x_thermal_zone->trip_mutex);
+
+	int34x_thermal_zone->adev = adev;
+	int34x_thermal_zone->override_ops = override_ops;
+
+	status = acpi_evaluate_integer(adev->handle, "PATC", NULL, &trip_cnt);
+	if (ACPI_FAILURE(status))
+		trip_cnt = 0;
+	else {
+		int i;
+
+		int34x_thermal_zone->aux_trips =
+			kcalloc(trip_cnt,
+				sizeof(*int34x_thermal_zone->aux_trips),
+				GFP_KERNEL);
+		if (!int34x_thermal_zone->aux_trips) {
+			ret = -ENOMEM;
+			goto err_trip_alloc;
+		}
+		trip_mask = BIT(trip_cnt) - 1;
+		int34x_thermal_zone->aux_trip_nr = trip_cnt;
+		for (i = 0; i < trip_cnt; ++i)
+			int34x_thermal_zone->aux_trips[i] = THERMAL_TEMP_INVALID;
+	}
+
+	trip_cnt = int340x_thermal_read_trips(int34x_thermal_zone);
+
+	int34x_thermal_zone->lpat_table = acpi_lpat_get_conversion_table(
+								adev->handle);
+
+	int34x_thermal_zone->zone = thermal_zone_device_register(
+						acpi_device_bid(adev),
+						trip_cnt,
+						trip_mask, int34x_thermal_zone,
+						&int340x_thermal_zone_ops,
+						&int340x_thermal_params,
+						0, 0);
+	if (IS_ERR(int34x_thermal_zone->zone)) {
+		ret = PTR_ERR(int34x_thermal_zone->zone);
+		goto err_thermal_zone;
+	}
+	ret = thermal_zone_device_enable(int34x_thermal_zone->zone);
+	if (ret)
+		goto err_enable;
+
+	return int34x_thermal_zone;
+
+err_enable:
+	thermal_zone_device_unregister(int34x_thermal_zone->zone);
+err_thermal_zone:
+	acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table);
+	kfree(int34x_thermal_zone->aux_trips);
+err_trip_alloc:
+	mutex_destroy(&int34x_thermal_zone->trip_mutex);
+	kfree(int34x_thermal_zone);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(int340x_thermal_zone_add);
+
+void int340x_thermal_zone_remove(struct int34x_thermal_zone
+				 *int34x_thermal_zone)
+{
+	thermal_zone_device_unregister(int34x_thermal_zone->zone);
+	acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table);
+	kfree(int34x_thermal_zone->aux_trips);
+	mutex_destroy(&int34x_thermal_zone->trip_mutex);
+	kfree(int34x_thermal_zone);
+}
+EXPORT_SYMBOL_GPL(int340x_thermal_zone_remove);
+
+MODULE_AUTHOR("Aaron Lu <aaron.lu@intel.com>");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Intel INT340x common thermal zone handler");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h
new file mode 100644
index 000000000..8f9872afd
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * int340x_thermal_zone.h
+ * Copyright (c) 2015, Intel Corporation.
+ */
+
+#ifndef __INT340X_THERMAL_ZONE_H__
+#define __INT340X_THERMAL_ZONE_H__
+
+#include <acpi/acpi_lpat.h>
+
+#define INT340X_THERMAL_MAX_ACT_TRIP_COUNT	10
+
+struct active_trip {
+	int temp;
+	int id;
+	bool valid;
+};
+
+struct int34x_thermal_zone {
+	struct acpi_device *adev;
+	struct active_trip act_trips[INT340X_THERMAL_MAX_ACT_TRIP_COUNT];
+	unsigned long *aux_trips;
+	int aux_trip_nr;
+	int psv_temp;
+	int psv_trip_id;
+	int crt_temp;
+	int crt_trip_id;
+	int hot_temp;
+	int hot_trip_id;
+	struct thermal_zone_device *zone;
+	struct thermal_zone_device_ops *override_ops;
+	void *priv_data;
+	struct acpi_lpat_conversion_table *lpat_table;
+	struct mutex trip_mutex;
+};
+
+struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *,
+				struct thermal_zone_device_ops *override_ops);
+void int340x_thermal_zone_remove(struct int34x_thermal_zone *);
+int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone);
+
+static inline void int340x_thermal_zone_set_priv_data(
+			struct int34x_thermal_zone *tzone, void *priv_data)
+{
+	tzone->priv_data = priv_data;
+}
+
+static inline void *int340x_thermal_zone_get_priv_data(
+			struct int34x_thermal_zone *tzone)
+{
+	return tzone->priv_data;
+}
+
+static inline void int340x_thermal_zone_device_update(
+					struct int34x_thermal_zone *tzone,
+					enum thermal_notify_event event)
+{
+	thermal_zone_device_update(tzone->zone, event);
+}
+
+#endif
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
new file mode 100644
index 000000000..a8d98f1bd
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * processor_thermal_device.c
+ * Copyright (c) 2014, Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+#include "../intel_soc_dts_iosf.h"
+
+#define DRV_NAME "proc_thermal"
+
+#define POWER_LIMIT_SHOW(index, suffix) \
+static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
+					struct device_attribute *attr, \
+					char *buf) \
+{ \
+	struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \
+	\
+	return sprintf(buf, "%lu\n",\
+	(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
+}
+
+POWER_LIMIT_SHOW(0, min_uw)
+POWER_LIMIT_SHOW(0, max_uw)
+POWER_LIMIT_SHOW(0, step_uw)
+POWER_LIMIT_SHOW(0, tmin_us)
+POWER_LIMIT_SHOW(0, tmax_us)
+
+POWER_LIMIT_SHOW(1, min_uw)
+POWER_LIMIT_SHOW(1, max_uw)
+POWER_LIMIT_SHOW(1, step_uw)
+POWER_LIMIT_SHOW(1, tmin_us)
+POWER_LIMIT_SHOW(1, tmax_us)
+
+static DEVICE_ATTR_RO(power_limit_0_min_uw);
+static DEVICE_ATTR_RO(power_limit_0_max_uw);
+static DEVICE_ATTR_RO(power_limit_0_step_uw);
+static DEVICE_ATTR_RO(power_limit_0_tmin_us);
+static DEVICE_ATTR_RO(power_limit_0_tmax_us);
+
+static DEVICE_ATTR_RO(power_limit_1_min_uw);
+static DEVICE_ATTR_RO(power_limit_1_max_uw);
+static DEVICE_ATTR_RO(power_limit_1_step_uw);
+static DEVICE_ATTR_RO(power_limit_1_tmin_us);
+static DEVICE_ATTR_RO(power_limit_1_tmax_us);
+
+static struct attribute *power_limit_attrs[] = {
+	&dev_attr_power_limit_0_min_uw.attr,
+	&dev_attr_power_limit_1_min_uw.attr,
+	&dev_attr_power_limit_0_max_uw.attr,
+	&dev_attr_power_limit_1_max_uw.attr,
+	&dev_attr_power_limit_0_step_uw.attr,
+	&dev_attr_power_limit_1_step_uw.attr,
+	&dev_attr_power_limit_0_tmin_us.attr,
+	&dev_attr_power_limit_1_tmin_us.attr,
+	&dev_attr_power_limit_0_tmax_us.attr,
+	&dev_attr_power_limit_1_tmax_us.attr,
+	NULL
+};
+
+static const struct attribute_group power_limit_attribute_group = {
+	.attrs = power_limit_attrs,
+	.name = "power_limits"
+};
+
+static int tcc_get_offset(void)
+{
+	u64 val;
+	int err;
+
+	err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
+	if (err)
+		return err;
+
+	return (val >> 24) & 0x3f;
+}
+
+static ssize_t tcc_offset_degree_celsius_show(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	int tcc;
+
+	tcc = tcc_get_offset();
+	if (tcc < 0)
+		return tcc;
+
+	return sprintf(buf, "%d\n", tcc);
+}
+
+static int tcc_offset_update(unsigned int tcc)
+{
+	u64 val;
+	int err;
+
+	if (tcc > 63)
+		return -EINVAL;
+
+	err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
+	if (err)
+		return err;
+
+	if (val & BIT(31))
+		return -EPERM;
+
+	val &= ~GENMASK_ULL(29, 24);
+	val |= (tcc & 0x3f) << 24;
+
+	err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	unsigned int tcc;
+	u64 val;
+	int err;
+
+	err = rdmsrl_safe(MSR_PLATFORM_INFO, &val);
+	if (err)
+		return err;
+
+	if (!(val & BIT(30)))
+		return -EACCES;
+
+	if (kstrtouint(buf, 0, &tcc))
+		return -EINVAL;
+
+	err = tcc_offset_update(tcc);
+	if (err)
+		return err;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(tcc_offset_degree_celsius);
+
+static int stored_tjmax; /* since it is fixed, we can have local storage */
+
+static int get_tjmax(void)
+{
+	u32 eax, edx;
+	u32 val;
+	int err;
+
+	err = rdmsr_safe(MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
+	if (err)
+		return err;
+
+	val = (eax >> 16) & 0xff;
+	if (val)
+		return val;
+
+	return -EINVAL;
+}
+
+static int read_temp_msr(int *temp)
+{
+	int cpu;
+	u32 eax, edx;
+	int err;
+	unsigned long curr_temp_off = 0;
+
+	*temp = 0;
+
+	for_each_online_cpu(cpu) {
+		err = rdmsr_safe_on_cpu(cpu, MSR_IA32_THERM_STATUS, &eax,
+					&edx);
+		if (err)
+			goto err_ret;
+		else {
+			if (eax & 0x80000000) {
+				curr_temp_off = (eax >> 16) & 0x7f;
+				if (!*temp || curr_temp_off < *temp)
+					*temp = curr_temp_off;
+			} else {
+				err = -EINVAL;
+				goto err_ret;
+			}
+		}
+	}
+
+	return 0;
+err_ret:
+	return err;
+}
+
+static int proc_thermal_get_zone_temp(struct thermal_zone_device *zone,
+					 int *temp)
+{
+	int ret;
+
+	ret = read_temp_msr(temp);
+	if (!ret)
+		*temp = (stored_tjmax - *temp) * 1000;
+
+	return ret;
+}
+
+static struct thermal_zone_device_ops proc_thermal_local_ops = {
+	.get_temp       = proc_thermal_get_zone_temp,
+};
+
+static int proc_thermal_read_ppcc(struct proc_thermal_device *proc_priv)
+{
+	int i;
+	acpi_status status;
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *elements, *ppcc;
+	union acpi_object *p;
+	int ret = 0;
+
+	status = acpi_evaluate_object(proc_priv->adev->handle, "PPCC",
+				      NULL, &buf);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	p = buf.pointer;
+	if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+		dev_err(proc_priv->dev, "Invalid PPCC data\n");
+		ret = -EFAULT;
+		goto free_buffer;
+	}
+
+	if (!p->package.count) {
+		dev_err(proc_priv->dev, "Invalid PPCC package size\n");
+		ret = -EFAULT;
+		goto free_buffer;
+	}
+
+	for (i = 0; i < min((int)p->package.count - 1, 2); ++i) {
+		elements = &(p->package.elements[i+1]);
+		if (elements->type != ACPI_TYPE_PACKAGE ||
+		    elements->package.count != 6) {
+			ret = -EFAULT;
+			goto free_buffer;
+		}
+		ppcc = elements->package.elements;
+		proc_priv->power_limits[i].index = ppcc[0].integer.value;
+		proc_priv->power_limits[i].min_uw = ppcc[1].integer.value;
+		proc_priv->power_limits[i].max_uw = ppcc[2].integer.value;
+		proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value;
+		proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value;
+		proc_priv->power_limits[i].step_uw = ppcc[5].integer.value;
+	}
+
+free_buffer:
+	kfree(buf.pointer);
+
+	return ret;
+}
+
+#define PROC_POWER_CAPABILITY_CHANGED	0x83
+static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct proc_thermal_device *proc_priv = data;
+
+	if (!proc_priv)
+		return;
+
+	switch (event) {
+	case PROC_POWER_CAPABILITY_CHANGED:
+		proc_thermal_read_ppcc(proc_priv);
+		int340x_thermal_zone_device_update(proc_priv->int340x_zone,
+				THERMAL_DEVICE_POWER_CAPABILITY_CHANGED);
+		break;
+	default:
+		dev_dbg(proc_priv->dev, "Unsupported event [0x%x]\n", event);
+		break;
+	}
+}
+
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
+{
+	struct acpi_device *adev;
+	acpi_status status;
+	unsigned long long tmp;
+	struct thermal_zone_device_ops *ops = NULL;
+	int ret;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENODEV;
+
+	proc_priv->dev = dev;
+	proc_priv->adev = adev;
+
+	ret = proc_thermal_read_ppcc(proc_priv);
+	if (ret)
+		return ret;
+
+	status = acpi_evaluate_integer(adev->handle, "_TMP", NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		/* there is no _TMP method, add local method */
+		stored_tjmax = get_tjmax();
+		if (stored_tjmax > 0)
+			ops = &proc_thermal_local_ops;
+	}
+
+	proc_priv->int340x_zone = int340x_thermal_zone_add(adev, ops);
+	if (IS_ERR(proc_priv->int340x_zone)) {
+		return PTR_ERR(proc_priv->int340x_zone);
+	} else
+		ret = 0;
+
+	ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY,
+					  proc_thermal_notify,
+					  (void *)proc_priv);
+	if (ret)
+		goto remove_zone;
+
+	ret = sysfs_create_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+	if (ret)
+		goto remove_notify;
+
+	ret = sysfs_create_group(&dev->kobj, &power_limit_attribute_group);
+	if (ret) {
+		sysfs_remove_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+		goto remove_notify;
+	}
+
+	return 0;
+
+remove_notify:
+	acpi_remove_notify_handler(adev->handle,
+				    ACPI_DEVICE_NOTIFY, proc_thermal_notify);
+remove_zone:
+	int340x_thermal_zone_remove(proc_priv->int340x_zone);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_add);
+
+void proc_thermal_remove(struct proc_thermal_device *proc_priv)
+{
+	acpi_remove_notify_handler(proc_priv->adev->handle,
+				   ACPI_DEVICE_NOTIFY, proc_thermal_notify);
+	int340x_thermal_zone_remove(proc_priv->int340x_zone);
+	sysfs_remove_file(&proc_priv->dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+	sysfs_remove_group(&proc_priv->dev->kobj,
+			   &power_limit_attribute_group);
+}
+EXPORT_SYMBOL_GPL(proc_thermal_remove);
+
+static int tcc_offset_save = -1;
+
+int proc_thermal_suspend(struct device *dev)
+{
+	tcc_offset_save = tcc_get_offset();
+	if (tcc_offset_save < 0)
+		dev_warn(dev, "failed to save offset (%d)\n", tcc_offset_save);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_suspend);
+
+int proc_thermal_resume(struct device *dev)
+{
+	struct proc_thermal_device *proc_dev;
+
+	proc_dev = dev_get_drvdata(dev);
+	proc_thermal_read_ppcc(proc_dev);
+
+	/* Do not update if saving failed */
+	if (tcc_offset_save >= 0)
+		tcc_offset_update(tcc_offset_save);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_resume);
+
+#define MCHBAR 0
+
+static int proc_thermal_set_mmio_base(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
+{
+	int ret;
+
+	ret = pcim_iomap_regions(pdev, 1 << MCHBAR, DRV_NAME);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
+		return -ENOMEM;
+	}
+
+	proc_priv->mmio_base = pcim_iomap_table(pdev)[MCHBAR];
+
+	return 0;
+}
+
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+			  struct proc_thermal_device *proc_priv,
+			  kernel_ulong_t feature_mask)
+{
+	int ret;
+
+	proc_priv->mmio_feature_mask = feature_mask;
+
+	if (feature_mask) {
+		ret = proc_thermal_set_mmio_base(pdev, proc_priv);
+		if (ret)
+			return ret;
+	}
+
+	if (feature_mask & PROC_THERMAL_FEATURE_RAPL) {
+		ret = proc_thermal_rapl_add(pdev, proc_priv);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add RAPL MMIO interface\n");
+			return ret;
+		}
+	}
+
+	if (feature_mask & PROC_THERMAL_FEATURE_FIVR ||
+	    feature_mask & PROC_THERMAL_FEATURE_DVFS) {
+		ret = proc_thermal_rfim_add(pdev, proc_priv);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add RFIM interface\n");
+			goto err_rem_rapl;
+		}
+	}
+
+	if (feature_mask & PROC_THERMAL_FEATURE_MBOX) {
+		ret = proc_thermal_mbox_add(pdev, proc_priv);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add MBOX interface\n");
+			goto err_rem_rfim;
+		}
+	}
+
+	return 0;
+
+err_rem_rfim:
+	proc_thermal_rfim_remove(pdev);
+err_rem_rapl:
+	proc_thermal_rapl_remove();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_mmio_add);
+
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
+{
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_RAPL)
+		proc_thermal_rapl_remove();
+
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR ||
+	    proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS)
+		proc_thermal_rfim_remove(pdev);
+
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_MBOX)
+		proc_thermal_mbox_remove(pdev);
+}
+EXPORT_SYMBOL_GPL(proc_thermal_mmio_remove);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
new file mode 100644
index 000000000..7d52fcff4
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * processor_thermal_device.h
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#ifndef __PROCESSOR_THERMAL_DEVICE_H__
+#define __PROCESSOR_THERMAL_DEVICE_H__
+
+#include <linux/intel_rapl.h>
+
+#define PCI_DEVICE_ID_INTEL_ADL_THERMAL	0x461d
+#define PCI_DEVICE_ID_INTEL_BDW_THERMAL	0x1603
+#define PCI_DEVICE_ID_INTEL_BSW_THERMAL	0x22DC
+
+#define PCI_DEVICE_ID_INTEL_BXT0_THERMAL	0x0A8C
+#define PCI_DEVICE_ID_INTEL_BXT1_THERMAL	0x1A8C
+#define PCI_DEVICE_ID_INTEL_BXTX_THERMAL	0x4A8C
+#define PCI_DEVICE_ID_INTEL_BXTP_THERMAL	0x5A8C
+
+#define PCI_DEVICE_ID_INTEL_CNL_THERMAL	0x5a03
+#define PCI_DEVICE_ID_INTEL_CFL_THERMAL	0x3E83
+#define PCI_DEVICE_ID_INTEL_GLK_THERMAL	0x318C
+#define PCI_DEVICE_ID_INTEL_HSB_THERMAL	0x0A03
+#define PCI_DEVICE_ID_INTEL_ICL_THERMAL	0x8a03
+#define PCI_DEVICE_ID_INTEL_JSL_THERMAL	0x4E03
+#define PCI_DEVICE_ID_INTEL_MTLP_THERMAL	0x7D03
+#define PCI_DEVICE_ID_INTEL_RPL_THERMAL	0xA71D
+#define PCI_DEVICE_ID_INTEL_SKL_THERMAL	0x1903
+#define PCI_DEVICE_ID_INTEL_TGL_THERMAL	0x9A03
+
+struct power_config {
+	u32	index;
+	u32	min_uw;
+	u32	max_uw;
+	u32	tmin_us;
+	u32	tmax_us;
+	u32	step_uw;
+};
+
+struct proc_thermal_device {
+	struct device *dev;
+	struct acpi_device *adev;
+	struct power_config power_limits[2];
+	struct int34x_thermal_zone *int340x_zone;
+	struct intel_soc_dts_sensors *soc_dts;
+	u32 mmio_feature_mask;
+	void __iomem *mmio_base;
+	void *priv_data;
+};
+
+struct rapl_mmio_regs {
+	u64 reg_unit;
+	u64 regs[RAPL_DOMAIN_MAX][RAPL_DOMAIN_REG_MAX];
+	int limits[RAPL_DOMAIN_MAX];
+};
+
+#define PROC_THERMAL_FEATURE_NONE	0x00
+#define PROC_THERMAL_FEATURE_RAPL	0x01
+#define PROC_THERMAL_FEATURE_FIVR	0x02
+#define PROC_THERMAL_FEATURE_DVFS	0x04
+#define PROC_THERMAL_FEATURE_MBOX	0x08
+
+#if IS_ENABLED(CONFIG_PROC_THERMAL_MMIO_RAPL)
+int proc_thermal_rapl_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
+void proc_thermal_rapl_remove(void);
+#else
+static int __maybe_unused proc_thermal_rapl_add(struct pci_dev *pdev,
+						struct proc_thermal_device *proc_priv)
+{
+	return 0;
+}
+
+static void __maybe_unused proc_thermal_rapl_remove(void)
+{
+}
+#endif
+
+int proc_thermal_rfim_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
+void proc_thermal_rfim_remove(struct pci_dev *pdev);
+
+int proc_thermal_mbox_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
+void proc_thermal_mbox_remove(struct pci_dev *pdev);
+
+int processor_thermal_send_mbox_read_cmd(struct pci_dev *pdev, u16 id, u64 *resp);
+int processor_thermal_send_mbox_write_cmd(struct pci_dev *pdev, u16 id, u32 data);
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *priv);
+void proc_thermal_remove(struct proc_thermal_device *proc_priv);
+int proc_thermal_suspend(struct device *dev);
+int proc_thermal_resume(struct device *dev);
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+			  struct proc_thermal_device *proc_priv,
+			  kernel_ulong_t feature_mask);
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
+#endif
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
new file mode 100644
index 000000000..bf1b1cdfa
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Processor thermal device for newer processors
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+
+#define DRV_NAME "proc_thermal_pci"
+
+struct proc_thermal_pci {
+	struct pci_dev *pdev;
+	struct proc_thermal_device *proc_priv;
+	struct thermal_zone_device *tzone;
+	struct delayed_work work;
+	int stored_thres;
+	int no_legacy;
+};
+
+enum proc_thermal_mmio_type {
+	PROC_THERMAL_MMIO_TJMAX,
+	PROC_THERMAL_MMIO_PP0_TEMP,
+	PROC_THERMAL_MMIO_PP1_TEMP,
+	PROC_THERMAL_MMIO_PKG_TEMP,
+	PROC_THERMAL_MMIO_THRES_0,
+	PROC_THERMAL_MMIO_THRES_1,
+	PROC_THERMAL_MMIO_INT_ENABLE_0,
+	PROC_THERMAL_MMIO_INT_ENABLE_1,
+	PROC_THERMAL_MMIO_INT_STATUS_0,
+	PROC_THERMAL_MMIO_INT_STATUS_1,
+	PROC_THERMAL_MMIO_MAX
+};
+
+struct proc_thermal_mmio_info {
+	enum proc_thermal_mmio_type mmio_type;
+	u64	mmio_addr;
+	u64	shift;
+	u64	mask;
+};
+
+static struct proc_thermal_mmio_info proc_thermal_mmio_info[] = {
+	{ PROC_THERMAL_MMIO_TJMAX, 0x599c, 16, 0xff },
+	{ PROC_THERMAL_MMIO_PP0_TEMP, 0x597c, 0, 0xff },
+	{ PROC_THERMAL_MMIO_PP1_TEMP, 0x5980, 0, 0xff },
+	{ PROC_THERMAL_MMIO_PKG_TEMP, 0x5978, 0, 0xff },
+	{ PROC_THERMAL_MMIO_THRES_0, 0x5820, 8, 0x7F },
+	{ PROC_THERMAL_MMIO_THRES_1, 0x5820, 16, 0x7F },
+	{ PROC_THERMAL_MMIO_INT_ENABLE_0, 0x5820, 15, 0x01 },
+	{ PROC_THERMAL_MMIO_INT_ENABLE_1, 0x5820, 23, 0x01 },
+	{ PROC_THERMAL_MMIO_INT_STATUS_0, 0x7200, 6, 0x01 },
+	{ PROC_THERMAL_MMIO_INT_STATUS_1, 0x7200, 8, 0x01 },
+};
+
+#define B0D4_THERMAL_NOTIFY_DELAY	1000
+static int notify_delay_ms = B0D4_THERMAL_NOTIFY_DELAY;
+
+static void proc_thermal_mmio_read(struct proc_thermal_pci *pci_info,
+				    enum proc_thermal_mmio_type type,
+				    u32 *value)
+{
+	*value = ioread32(((u8 __iomem *)pci_info->proc_priv->mmio_base +
+				proc_thermal_mmio_info[type].mmio_addr));
+	*value >>= proc_thermal_mmio_info[type].shift;
+	*value &= proc_thermal_mmio_info[type].mask;
+}
+
+static void proc_thermal_mmio_write(struct proc_thermal_pci *pci_info,
+				     enum proc_thermal_mmio_type type,
+				     u32 value)
+{
+	u32 current_val;
+	u32 mask;
+
+	current_val = ioread32(((u8 __iomem *)pci_info->proc_priv->mmio_base +
+				proc_thermal_mmio_info[type].mmio_addr));
+	mask = proc_thermal_mmio_info[type].mask << proc_thermal_mmio_info[type].shift;
+	current_val &= ~mask;
+
+	value &= proc_thermal_mmio_info[type].mask;
+	value <<= proc_thermal_mmio_info[type].shift;
+
+	current_val |= value;
+	iowrite32(current_val, ((u8 __iomem *)pci_info->proc_priv->mmio_base +
+				proc_thermal_mmio_info[type].mmio_addr));
+}
+
+/*
+ * To avoid sending two many messages to user space, we have 1 second delay.
+ * On interrupt we are disabling interrupt and enabling after 1 second.
+ * This workload function is delayed by 1 second.
+ */
+static void proc_thermal_threshold_work_fn(struct work_struct *work)
+{
+	struct delayed_work *delayed_work = to_delayed_work(work);
+	struct proc_thermal_pci *pci_info = container_of(delayed_work,
+						struct proc_thermal_pci, work);
+	struct thermal_zone_device *tzone = pci_info->tzone;
+
+	if (tzone)
+		thermal_zone_device_update(tzone, THERMAL_TRIP_VIOLATED);
+
+	/* Enable interrupt flag */
+	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1);
+}
+
+static void pkg_thermal_schedule_work(struct delayed_work *work)
+{
+	unsigned long ms = msecs_to_jiffies(notify_delay_ms);
+
+	schedule_delayed_work(work, ms);
+}
+
+static irqreturn_t proc_thermal_irq_handler(int irq, void *devid)
+{
+	struct proc_thermal_pci *pci_info = devid;
+	u32 status;
+
+	proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_INT_STATUS_0, &status);
+
+	/* Disable enable interrupt flag */
+	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
+	pci_write_config_byte(pci_info->pdev, 0xdc, 0x01);
+
+	pkg_thermal_schedule_work(&pci_info->work);
+
+	return IRQ_HANDLED;
+}
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp)
+{
+	struct proc_thermal_pci *pci_info = tzd->devdata;
+	u32 _temp;
+
+	proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_PKG_TEMP, &_temp);
+	*temp = (unsigned long)_temp * 1000;
+
+	return 0;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzd,
+			     int trip, int *temp)
+{
+	struct proc_thermal_pci *pci_info = tzd->devdata;
+	u32 _temp;
+
+	proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_THRES_0, &_temp);
+	if (!_temp) {
+		*temp = THERMAL_TEMP_INVALID;
+	} else {
+		int tjmax;
+
+		proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_TJMAX, &tjmax);
+		_temp = tjmax - _temp;
+		*temp = (unsigned long)_temp * 1000;
+	}
+
+	return 0;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *tzd, int trip,
+			      enum thermal_trip_type *type)
+{
+	*type = THERMAL_TRIP_PASSIVE;
+
+	return 0;
+}
+
+static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp)
+{
+	struct proc_thermal_pci *pci_info = tzd->devdata;
+	int tjmax, _temp;
+
+	if (temp <= 0) {
+		cancel_delayed_work_sync(&pci_info->work);
+		proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
+		proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0);
+		thermal_zone_device_disable(tzd);
+		pci_info->stored_thres = 0;
+		return 0;
+	}
+
+	proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_TJMAX, &tjmax);
+	_temp = tjmax - (temp / 1000);
+	if (_temp < 0)
+		return -EINVAL;
+
+	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, _temp);
+	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1);
+
+	thermal_zone_device_enable(tzd);
+	pci_info->stored_thres = temp;
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+	.get_temp = sys_get_curr_temp,
+	.get_trip_temp = sys_get_trip_temp,
+	.get_trip_type = sys_get_trip_type,
+	.set_trip_temp	= sys_set_trip_temp,
+};
+
+static struct thermal_zone_params tzone_params = {
+	.governor_name = "user_space",
+	.no_hwmon = true,
+};
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct proc_thermal_device *proc_priv;
+	struct proc_thermal_pci *pci_info;
+	int irq_flag = 0, irq, ret;
+
+	proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+	if (!proc_priv)
+		return -ENOMEM;
+
+	pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
+	if (!pci_info)
+		return -ENOMEM;
+
+	pci_info->pdev = pdev;
+	ret = pcim_enable_device(pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "error: could not enable device\n");
+		return ret;
+	}
+
+	pci_set_master(pdev);
+
+	INIT_DELAYED_WORK(&pci_info->work, proc_thermal_threshold_work_fn);
+
+	ret = proc_thermal_add(&pdev->dev, proc_priv);
+	if (ret) {
+		dev_err(&pdev->dev, "error: proc_thermal_add, will continue\n");
+		pci_info->no_legacy = 1;
+	}
+
+	proc_priv->priv_data = pci_info;
+	pci_info->proc_priv = proc_priv;
+	pci_set_drvdata(pdev, proc_priv);
+
+	ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
+	if (ret)
+		goto err_ret_thermal;
+
+	pci_info->tzone = thermal_zone_device_register("TCPU_PCI", 1, 1, pci_info,
+							&tzone_ops,
+							&tzone_params, 0, 0);
+	if (IS_ERR(pci_info->tzone)) {
+		ret = PTR_ERR(pci_info->tzone);
+		goto err_ret_mmio;
+	}
+
+	/* request and enable interrupt */
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to allocate vectors!\n");
+		goto err_ret_tzone;
+	}
+	if (!pdev->msi_enabled && !pdev->msix_enabled)
+		irq_flag = IRQF_SHARED;
+
+	irq =  pci_irq_vector(pdev, 0);
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
+					proc_thermal_irq_handler, NULL,
+					irq_flag, KBUILD_MODNAME, pci_info);
+	if (ret) {
+		dev_err(&pdev->dev, "Request IRQ %d failed\n", pdev->irq);
+		goto err_free_vectors;
+	}
+
+	return 0;
+
+err_free_vectors:
+	pci_free_irq_vectors(pdev);
+err_ret_tzone:
+	thermal_zone_device_unregister(pci_info->tzone);
+err_ret_mmio:
+	proc_thermal_mmio_remove(pdev, proc_priv);
+err_ret_thermal:
+	if (!pci_info->no_legacy)
+		proc_thermal_remove(proc_priv);
+	pci_disable_device(pdev);
+
+	return ret;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+	struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+	struct proc_thermal_pci *pci_info = proc_priv->priv_data;
+
+	cancel_delayed_work_sync(&pci_info->work);
+
+	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0);
+	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
+
+	devm_free_irq(&pdev->dev, pdev->irq, pci_info);
+	pci_free_irq_vectors(pdev);
+
+	thermal_zone_device_unregister(pci_info->tzone);
+	proc_thermal_mmio_remove(pdev, pci_info->proc_priv);
+	if (!pci_info->no_legacy)
+		proc_thermal_remove(proc_priv);
+	pci_disable_device(pdev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct proc_thermal_device *proc_priv;
+	struct proc_thermal_pci *pci_info;
+
+	proc_priv = pci_get_drvdata(pdev);
+	pci_info = proc_priv->priv_data;
+
+	if (!pci_info->no_legacy)
+		return proc_thermal_suspend(dev);
+
+	return 0;
+}
+static int proc_thermal_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct proc_thermal_device *proc_priv;
+	struct proc_thermal_pci *pci_info;
+
+	proc_priv = pci_get_drvdata(pdev);
+	pci_info = proc_priv->priv_data;
+
+	if (pci_info->stored_thres) {
+		proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0,
+					 pci_info->stored_thres / 1000);
+		proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1);
+	}
+
+	if (!pci_info->no_legacy)
+		return proc_thermal_resume(dev);
+
+	return 0;
+}
+#else
+#define proc_thermal_pci_suspend NULL
+#define proc_thermal_pci_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
+			 proc_thermal_pci_resume);
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+	{ PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
+	{ PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
+	{ PCI_DEVICE_DATA(INTEL, RPL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+	.name		= DRV_NAME,
+	.probe		= proc_thermal_pci_probe,
+	.remove	= proc_thermal_pci_remove,
+	.id_table	= proc_thermal_pci_ids,
+	.driver.pm	= &proc_thermal_pci_pm,
+};
+
+module_pci_driver(proc_thermal_pci_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
new file mode 100644
index 000000000..09e032f82
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * B0D4 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+#include "../intel_soc_dts_iosf.h"
+
+#define DRV_NAME "proc_thermal"
+
+static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
+{
+	struct proc_thermal_device *proc_priv;
+	struct pci_dev *pdev = devid;
+
+	proc_priv = pci_get_drvdata(pdev);
+
+	intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
+
+	return IRQ_HANDLED;
+}
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	struct proc_thermal_device *proc_priv;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "error: could not enable device\n");
+		return ret;
+	}
+
+	proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+	if (!proc_priv)
+		return -ENOMEM;
+
+	ret = proc_thermal_add(&pdev->dev, proc_priv);
+	if (ret)
+		return ret;
+
+	pci_set_drvdata(pdev, proc_priv);
+
+	if (pdev->device == PCI_DEVICE_ID_INTEL_BSW_THERMAL) {
+		/*
+		 * Enumerate additional DTS sensors available via IOSF.
+		 * But we are not treating as a failure condition, if
+		 * there are no aux DTSs enabled or fails. This driver
+		 * already exposes sensors, which can be accessed via
+		 * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
+		 */
+		proc_priv->soc_dts = intel_soc_dts_iosf_init(
+					INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
+
+		if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
+			ret = pci_enable_msi(pdev);
+			if (!ret) {
+				ret = request_threaded_irq(pdev->irq, NULL,
+						proc_thermal_pci_msi_irq,
+						IRQF_ONESHOT, "proc_thermal",
+						pdev);
+				if (ret) {
+					intel_soc_dts_iosf_exit(
+							proc_priv->soc_dts);
+					pci_disable_msi(pdev);
+					proc_priv->soc_dts = NULL;
+				}
+			}
+		} else
+			dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
+	} else {
+
+	}
+
+	ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
+	if (ret) {
+		proc_thermal_remove(proc_priv);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+	struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+
+	if (proc_priv->soc_dts) {
+		intel_soc_dts_iosf_exit(proc_priv->soc_dts);
+		if (pdev->irq) {
+			free_irq(pdev->irq, pdev);
+			pci_disable_msi(pdev);
+		}
+	}
+
+	proc_thermal_mmio_remove(pdev, proc_priv);
+	proc_thermal_remove(proc_priv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_suspend(struct device *dev)
+{
+	return proc_thermal_suspend(dev);
+}
+static int proc_thermal_pci_resume(struct device *dev)
+{
+	return proc_thermal_resume(dev);
+}
+#else
+#define proc_thermal_pci_suspend NULL
+#define proc_thermal_pci_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
+			 proc_thermal_pci_resume);
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+	{ PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BSW_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXT0_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXT1_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXTX_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXTP_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, CNL_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, CFL_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, GLK_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, HSB_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, ICL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+	{ PCI_DEVICE_DATA(INTEL, JSL_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, SKL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+	{ PCI_DEVICE_DATA(INTEL, TGL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_MBOX) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+	.name		= DRV_NAME,
+	.probe		= proc_thermal_pci_probe,
+	.remove		= proc_thermal_pci_remove,
+	.id_table	= proc_thermal_pci_ids,
+	.driver.pm	= &proc_thermal_pci_pm,
+};
+
+module_pci_driver(proc_thermal_pci_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
new file mode 100644
index 000000000..0b89a4340
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * processor thermal device mailbox driver for Workload type hints
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include "processor_thermal_device.h"
+
+#define MBOX_CMD_WORKLOAD_TYPE_READ	0x0E
+#define MBOX_CMD_WORKLOAD_TYPE_WRITE	0x0F
+
+#define MBOX_OFFSET_DATA		0x5810
+#define MBOX_OFFSET_INTERFACE		0x5818
+
+#define MBOX_BUSY_BIT			31
+#define MBOX_RETRY_COUNT		100
+
+#define MBOX_DATA_BIT_VALID		31
+#define MBOX_DATA_BIT_AC_DC		30
+
+static DEFINE_MUTEX(mbox_lock);
+
+static int wait_for_mbox_ready(struct proc_thermal_device *proc_priv)
+{
+	u32 retries, data;
+	int ret;
+
+	/* Poll for rb bit == 0 */
+	retries = MBOX_RETRY_COUNT;
+	do {
+		data = readl(proc_priv->mmio_base + MBOX_OFFSET_INTERFACE);
+		if (data & BIT_ULL(MBOX_BUSY_BIT)) {
+			ret = -EBUSY;
+			continue;
+		}
+		ret = 0;
+		break;
+	} while (--retries);
+
+	return ret;
+}
+
+static int send_mbox_write_cmd(struct pci_dev *pdev, u16 id, u32 data)
+{
+	struct proc_thermal_device *proc_priv;
+	u32 reg_data;
+	int ret;
+
+	proc_priv = pci_get_drvdata(pdev);
+
+	mutex_lock(&mbox_lock);
+
+	ret = wait_for_mbox_ready(proc_priv);
+	if (ret)
+		goto unlock_mbox;
+
+	writel(data, (proc_priv->mmio_base + MBOX_OFFSET_DATA));
+	/* Write command register */
+	reg_data = BIT_ULL(MBOX_BUSY_BIT) | id;
+	writel(reg_data, (proc_priv->mmio_base + MBOX_OFFSET_INTERFACE));
+
+	ret = wait_for_mbox_ready(proc_priv);
+
+unlock_mbox:
+	mutex_unlock(&mbox_lock);
+	return ret;
+}
+
+static int send_mbox_read_cmd(struct pci_dev *pdev, u16 id, u64 *resp)
+{
+	struct proc_thermal_device *proc_priv;
+	u32 reg_data;
+	int ret;
+
+	proc_priv = pci_get_drvdata(pdev);
+
+	mutex_lock(&mbox_lock);
+
+	ret = wait_for_mbox_ready(proc_priv);
+	if (ret)
+		goto unlock_mbox;
+
+	/* Write command register */
+	reg_data = BIT_ULL(MBOX_BUSY_BIT) | id;
+	writel(reg_data, (proc_priv->mmio_base + MBOX_OFFSET_INTERFACE));
+
+	ret = wait_for_mbox_ready(proc_priv);
+	if (ret)
+		goto unlock_mbox;
+
+	if (id == MBOX_CMD_WORKLOAD_TYPE_READ)
+		*resp = readl(proc_priv->mmio_base + MBOX_OFFSET_DATA);
+	else
+		*resp = readq(proc_priv->mmio_base + MBOX_OFFSET_DATA);
+
+unlock_mbox:
+	mutex_unlock(&mbox_lock);
+	return ret;
+}
+
+int processor_thermal_send_mbox_read_cmd(struct pci_dev *pdev, u16 id, u64 *resp)
+{
+	return send_mbox_read_cmd(pdev, id, resp);
+}
+EXPORT_SYMBOL_NS_GPL(processor_thermal_send_mbox_read_cmd, INT340X_THERMAL);
+
+int processor_thermal_send_mbox_write_cmd(struct pci_dev *pdev, u16 id, u32 data)
+{
+	return send_mbox_write_cmd(pdev, id, data);
+}
+EXPORT_SYMBOL_NS_GPL(processor_thermal_send_mbox_write_cmd, INT340X_THERMAL);
+
+/* List of workload types */
+static const char * const workload_types[] = {
+	"none",
+	"idle",
+	"semi_active",
+	"bursty",
+	"sustained",
+	"battery_life",
+	NULL
+};
+
+static ssize_t workload_available_types_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	int i = 0;
+	int ret = 0;
+
+	while (workload_types[i] != NULL)
+		ret += sprintf(&buf[ret], "%s ", workload_types[i++]);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+static DEVICE_ATTR_RO(workload_available_types);
+
+static ssize_t workload_type_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	char str_preference[15];
+	u32 data = 0;
+	ssize_t ret;
+
+	ret = sscanf(buf, "%14s", str_preference);
+	if (ret != 1)
+		return -EINVAL;
+
+	ret = match_string(workload_types, -1, str_preference);
+	if (ret < 0)
+		return ret;
+
+	ret &= 0xff;
+
+	if (ret)
+		data = BIT(MBOX_DATA_BIT_VALID) | BIT(MBOX_DATA_BIT_AC_DC);
+
+	data |= ret;
+
+	ret = send_mbox_write_cmd(pdev, MBOX_CMD_WORKLOAD_TYPE_WRITE, data);
+	if (ret)
+		return false;
+
+	return count;
+}
+
+static ssize_t workload_type_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	u64 cmd_resp;
+	int ret;
+
+	ret = send_mbox_read_cmd(pdev, MBOX_CMD_WORKLOAD_TYPE_READ, &cmd_resp);
+	if (ret)
+		return false;
+
+	cmd_resp &= 0xff;
+
+	if (cmd_resp > ARRAY_SIZE(workload_types) - 1)
+		return -EINVAL;
+
+	return sprintf(buf, "%s\n", workload_types[cmd_resp]);
+}
+
+static DEVICE_ATTR_RW(workload_type);
+
+static struct attribute *workload_req_attrs[] = {
+	&dev_attr_workload_available_types.attr,
+	&dev_attr_workload_type.attr,
+	NULL
+};
+
+static const struct attribute_group workload_req_attribute_group = {
+	.attrs = workload_req_attrs,
+	.name = "workload_request"
+};
+
+static bool workload_req_created;
+
+int proc_thermal_mbox_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
+{
+	u64 cmd_resp;
+	int ret;
+
+	/* Check if there is a mailbox support, if fails return success */
+	ret = send_mbox_read_cmd(pdev, MBOX_CMD_WORKLOAD_TYPE_READ, &cmd_resp);
+	if (ret)
+		return 0;
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &workload_req_attribute_group);
+	if (ret)
+		return ret;
+
+	workload_req_created = true;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_mbox_add);
+
+void proc_thermal_mbox_remove(struct pci_dev *pdev)
+{
+	if (workload_req_created)
+		sysfs_remove_group(&pdev->dev.kobj, &workload_req_attribute_group);
+
+	workload_req_created = false;
+
+}
+EXPORT_SYMBOL_GPL(proc_thermal_mbox_remove);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rapl.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rapl.c
new file mode 100644
index 000000000..a205221ec
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rapl.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * processor thermal device RFIM control
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "processor_thermal_device.h"
+
+static struct rapl_if_priv rapl_mmio_priv;
+
+static const struct rapl_mmio_regs rapl_mmio_default = {
+	.reg_unit = 0x5938,
+	.regs[RAPL_DOMAIN_PACKAGE] = { 0x59a0, 0x593c, 0x58f0, 0, 0x5930},
+	.regs[RAPL_DOMAIN_DRAM] = { 0x58e0, 0x58e8, 0x58ec, 0, 0},
+	.limits[RAPL_DOMAIN_PACKAGE] = 2,
+	.limits[RAPL_DOMAIN_DRAM] = 2,
+};
+
+static int rapl_mmio_cpu_online(unsigned int cpu)
+{
+	struct rapl_package *rp;
+
+	/* mmio rapl supports package 0 only for now */
+	if (topology_physical_package_id(cpu))
+		return 0;
+
+	rp = rapl_find_package_domain(cpu, &rapl_mmio_priv);
+	if (!rp) {
+		rp = rapl_add_package(cpu, &rapl_mmio_priv);
+		if (IS_ERR(rp))
+			return PTR_ERR(rp);
+	}
+	cpumask_set_cpu(cpu, &rp->cpumask);
+	return 0;
+}
+
+static int rapl_mmio_cpu_down_prep(unsigned int cpu)
+{
+	struct rapl_package *rp;
+	int lead_cpu;
+
+	rp = rapl_find_package_domain(cpu, &rapl_mmio_priv);
+	if (!rp)
+		return 0;
+
+	cpumask_clear_cpu(cpu, &rp->cpumask);
+	lead_cpu = cpumask_first(&rp->cpumask);
+	if (lead_cpu >= nr_cpu_ids)
+		rapl_remove_package(rp);
+	else if (rp->lead_cpu == cpu)
+		rp->lead_cpu = lead_cpu;
+	return 0;
+}
+
+static int rapl_mmio_read_raw(int cpu, struct reg_action *ra)
+{
+	if (!ra->reg)
+		return -EINVAL;
+
+	ra->value = readq((void __iomem *)ra->reg);
+	ra->value &= ra->mask;
+	return 0;
+}
+
+static int rapl_mmio_write_raw(int cpu, struct reg_action *ra)
+{
+	u64 val;
+
+	if (!ra->reg)
+		return -EINVAL;
+
+	val = readq((void __iomem *)ra->reg);
+	val &= ~ra->mask;
+	val |= ra->value;
+	writeq(val, (void __iomem *)ra->reg);
+	return 0;
+}
+
+int proc_thermal_rapl_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
+{
+	const struct rapl_mmio_regs *rapl_regs = &rapl_mmio_default;
+	enum rapl_domain_reg_id reg;
+	enum rapl_domain_type domain;
+	int ret;
+
+	if (!rapl_regs)
+		return 0;
+
+	for (domain = RAPL_DOMAIN_PACKAGE; domain < RAPL_DOMAIN_MAX; domain++) {
+		for (reg = RAPL_DOMAIN_REG_LIMIT; reg < RAPL_DOMAIN_REG_MAX; reg++)
+			if (rapl_regs->regs[domain][reg])
+				rapl_mmio_priv.regs[domain][reg] =
+						(u64)proc_priv->mmio_base +
+						rapl_regs->regs[domain][reg];
+		rapl_mmio_priv.limits[domain] = rapl_regs->limits[domain];
+	}
+	rapl_mmio_priv.reg_unit = (u64)proc_priv->mmio_base + rapl_regs->reg_unit;
+
+	rapl_mmio_priv.read_raw = rapl_mmio_read_raw;
+	rapl_mmio_priv.write_raw = rapl_mmio_write_raw;
+
+	rapl_mmio_priv.control_type = powercap_register_control_type(NULL, "intel-rapl-mmio", NULL);
+	if (IS_ERR(rapl_mmio_priv.control_type)) {
+		pr_debug("failed to register powercap control_type.\n");
+		return PTR_ERR(rapl_mmio_priv.control_type);
+	}
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powercap/rapl:online",
+				rapl_mmio_cpu_online, rapl_mmio_cpu_down_prep);
+	if (ret < 0) {
+		powercap_unregister_control_type(rapl_mmio_priv.control_type);
+		rapl_mmio_priv.control_type = NULL;
+		return ret;
+	}
+	rapl_mmio_priv.pcap_rapl_online = ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_rapl_add);
+
+void proc_thermal_rapl_remove(void)
+{
+	if (IS_ERR_OR_NULL(rapl_mmio_priv.control_type))
+		return;
+
+	cpuhp_remove_state(rapl_mmio_priv.pcap_rapl_online);
+	powercap_unregister_control_type(rapl_mmio_priv.control_type);
+}
+EXPORT_SYMBOL_GPL(proc_thermal_rapl_remove);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
new file mode 100644
index 000000000..92ed1213f
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * processor thermal device RFIM control
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "processor_thermal_device.h"
+
+MODULE_IMPORT_NS(INT340X_THERMAL);
+
+struct mmio_reg {
+	int read_only;
+	u32 offset;
+	int bits;
+	u16 mask;
+	u16 shift;
+};
+
+/* These will represent sysfs attribute names */
+static const char * const fivr_strings[] = {
+	"vco_ref_code_lo",
+	"vco_ref_code_hi",
+	"spread_spectrum_pct",
+	"spread_spectrum_clk_enable",
+	"rfi_vco_ref_code",
+	"fivr_fffc_rev",
+	NULL
+};
+
+static const struct mmio_reg tgl_fivr_mmio_regs[] = {
+	{ 0, 0x5A18, 3, 0x7, 11}, /* vco_ref_code_lo */
+	{ 0, 0x5A18, 8, 0xFF, 16}, /* vco_ref_code_hi */
+	{ 0, 0x5A08, 8, 0xFF, 0}, /* spread_spectrum_pct */
+	{ 0, 0x5A08, 1, 0x1, 8}, /* spread_spectrum_clk_enable */
+	{ 1, 0x5A10, 12, 0xFFF, 0}, /* rfi_vco_ref_code */
+	{ 1, 0x5A14, 2, 0x3, 1}, /* fivr_fffc_rev */
+};
+
+/* These will represent sysfs attribute names */
+static const char * const dvfs_strings[] = {
+	"rfi_restriction_run_busy",
+	"rfi_restriction_err_code",
+	"rfi_restriction_data_rate",
+	"rfi_restriction_data_rate_base",
+	"ddr_data_rate_point_0",
+	"ddr_data_rate_point_1",
+	"ddr_data_rate_point_2",
+	"ddr_data_rate_point_3",
+	"rfi_disable",
+	NULL
+};
+
+static const struct mmio_reg adl_dvfs_mmio_regs[] = {
+	{ 0, 0x5A38, 1, 0x1, 31}, /* rfi_restriction_run_busy */
+	{ 0, 0x5A38, 7, 0x7F, 24}, /* rfi_restriction_err_code */
+	{ 0, 0x5A38, 8, 0xFF, 16}, /* rfi_restriction_data_rate */
+	{ 0, 0x5A38, 16, 0xFFFF, 0}, /* rfi_restriction_data_rate_base */
+	{ 0, 0x5A30, 10, 0x3FF, 0}, /* ddr_data_rate_point_0 */
+	{ 0, 0x5A30, 10, 0x3FF, 10}, /* ddr_data_rate_point_1 */
+	{ 0, 0x5A30, 10, 0x3FF, 20}, /* ddr_data_rate_point_2 */
+	{ 0, 0x5A30, 10, 0x3FF, 30}, /* ddr_data_rate_point_3 */
+	{ 0, 0x5A40, 1, 0x1, 0}, /* rfi_disable */
+};
+
+#define RFIM_SHOW(suffix, table)\
+static ssize_t suffix##_show(struct device *dev,\
+			      struct device_attribute *attr,\
+			      char *buf)\
+{\
+	struct proc_thermal_device *proc_priv;\
+	struct pci_dev *pdev = to_pci_dev(dev);\
+	const struct mmio_reg *mmio_regs;\
+	const char **match_strs;\
+	u32 reg_val;\
+	int ret;\
+\
+	proc_priv = pci_get_drvdata(pdev);\
+	if (table) {\
+		match_strs = (const char **)dvfs_strings;\
+		mmio_regs = adl_dvfs_mmio_regs;\
+	} else { \
+		match_strs = (const char **)fivr_strings;\
+		mmio_regs = tgl_fivr_mmio_regs;\
+	} \
+	\
+	ret = match_string(match_strs, -1, attr->attr.name);\
+	if (ret < 0)\
+		return ret;\
+	reg_val = readl((void __iomem *) (proc_priv->mmio_base + mmio_regs[ret].offset));\
+	ret = (reg_val >> mmio_regs[ret].shift) & mmio_regs[ret].mask;\
+	return sprintf(buf, "%u\n", ret);\
+}
+
+#define RFIM_STORE(suffix, table)\
+static ssize_t suffix##_store(struct device *dev,\
+			       struct device_attribute *attr,\
+			       const char *buf, size_t count)\
+{\
+	struct proc_thermal_device *proc_priv;\
+	struct pci_dev *pdev = to_pci_dev(dev);\
+	unsigned int input;\
+	const char **match_strs;\
+	const struct mmio_reg *mmio_regs;\
+	int ret, err;\
+	u32 reg_val;\
+	u32 mask;\
+\
+	proc_priv = pci_get_drvdata(pdev);\
+	if (table) {\
+		match_strs = (const char **)dvfs_strings;\
+		mmio_regs = adl_dvfs_mmio_regs;\
+	} else { \
+		match_strs = (const char **)fivr_strings;\
+		mmio_regs = tgl_fivr_mmio_regs;\
+	} \
+	\
+	ret = match_string(match_strs, -1, attr->attr.name);\
+	if (ret < 0)\
+		return ret;\
+	if (mmio_regs[ret].read_only)\
+		return -EPERM;\
+	err = kstrtouint(buf, 10, &input);\
+	if (err)\
+		return err;\
+	mask = GENMASK(mmio_regs[ret].shift + mmio_regs[ret].bits - 1, mmio_regs[ret].shift);\
+	reg_val = readl((void __iomem *) (proc_priv->mmio_base + mmio_regs[ret].offset));\
+	reg_val &= ~mask;\
+	reg_val |= (input << mmio_regs[ret].shift);\
+	writel(reg_val, (void __iomem *) (proc_priv->mmio_base + mmio_regs[ret].offset));\
+	return count;\
+}
+
+RFIM_SHOW(vco_ref_code_lo, 0)
+RFIM_SHOW(vco_ref_code_hi, 0)
+RFIM_SHOW(spread_spectrum_pct, 0)
+RFIM_SHOW(spread_spectrum_clk_enable, 0)
+RFIM_SHOW(rfi_vco_ref_code, 0)
+RFIM_SHOW(fivr_fffc_rev, 0)
+
+RFIM_STORE(vco_ref_code_lo, 0)
+RFIM_STORE(vco_ref_code_hi, 0)
+RFIM_STORE(spread_spectrum_pct, 0)
+RFIM_STORE(spread_spectrum_clk_enable, 0)
+RFIM_STORE(rfi_vco_ref_code, 0)
+RFIM_STORE(fivr_fffc_rev, 0)
+
+static DEVICE_ATTR_RW(vco_ref_code_lo);
+static DEVICE_ATTR_RW(vco_ref_code_hi);
+static DEVICE_ATTR_RW(spread_spectrum_pct);
+static DEVICE_ATTR_RW(spread_spectrum_clk_enable);
+static DEVICE_ATTR_RW(rfi_vco_ref_code);
+static DEVICE_ATTR_RW(fivr_fffc_rev);
+
+static struct attribute *fivr_attrs[] = {
+	&dev_attr_vco_ref_code_lo.attr,
+	&dev_attr_vco_ref_code_hi.attr,
+	&dev_attr_spread_spectrum_pct.attr,
+	&dev_attr_spread_spectrum_clk_enable.attr,
+	&dev_attr_rfi_vco_ref_code.attr,
+	&dev_attr_fivr_fffc_rev.attr,
+	NULL
+};
+
+static const struct attribute_group fivr_attribute_group = {
+	.attrs = fivr_attrs,
+	.name = "fivr"
+};
+
+RFIM_SHOW(rfi_restriction_run_busy, 1)
+RFIM_SHOW(rfi_restriction_err_code, 1)
+RFIM_SHOW(rfi_restriction_data_rate, 1)
+RFIM_SHOW(rfi_restriction_data_rate_base, 1)
+RFIM_SHOW(ddr_data_rate_point_0, 1)
+RFIM_SHOW(ddr_data_rate_point_1, 1)
+RFIM_SHOW(ddr_data_rate_point_2, 1)
+RFIM_SHOW(ddr_data_rate_point_3, 1)
+RFIM_SHOW(rfi_disable, 1)
+
+RFIM_STORE(rfi_restriction_run_busy, 1)
+RFIM_STORE(rfi_restriction_err_code, 1)
+RFIM_STORE(rfi_restriction_data_rate, 1)
+RFIM_STORE(rfi_restriction_data_rate_base, 1)
+RFIM_STORE(rfi_disable, 1)
+
+static DEVICE_ATTR_RW(rfi_restriction_run_busy);
+static DEVICE_ATTR_RW(rfi_restriction_err_code);
+static DEVICE_ATTR_RW(rfi_restriction_data_rate);
+static DEVICE_ATTR_RW(rfi_restriction_data_rate_base);
+static DEVICE_ATTR_RO(ddr_data_rate_point_0);
+static DEVICE_ATTR_RO(ddr_data_rate_point_1);
+static DEVICE_ATTR_RO(ddr_data_rate_point_2);
+static DEVICE_ATTR_RO(ddr_data_rate_point_3);
+static DEVICE_ATTR_RW(rfi_disable);
+
+static ssize_t rfi_restriction_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	u16 id = 0x0008;
+	u32 input;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &input);
+	if (ret)
+		return ret;
+
+	ret = processor_thermal_send_mbox_write_cmd(to_pci_dev(dev), id, input);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t rfi_restriction_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	u16 id = 0x0007;
+	u64 resp;
+	int ret;
+
+	ret = processor_thermal_send_mbox_read_cmd(to_pci_dev(dev), id, &resp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%llu\n", resp);
+}
+
+static ssize_t ddr_data_rate_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	u16 id = 0x0107;
+	u64 resp;
+	int ret;
+
+	ret = processor_thermal_send_mbox_read_cmd(to_pci_dev(dev), id, &resp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%llu\n", resp);
+}
+
+static DEVICE_ATTR_RW(rfi_restriction);
+static DEVICE_ATTR_RO(ddr_data_rate);
+
+static struct attribute *dvfs_attrs[] = {
+	&dev_attr_rfi_restriction_run_busy.attr,
+	&dev_attr_rfi_restriction_err_code.attr,
+	&dev_attr_rfi_restriction_data_rate.attr,
+	&dev_attr_rfi_restriction_data_rate_base.attr,
+	&dev_attr_ddr_data_rate_point_0.attr,
+	&dev_attr_ddr_data_rate_point_1.attr,
+	&dev_attr_ddr_data_rate_point_2.attr,
+	&dev_attr_ddr_data_rate_point_3.attr,
+	&dev_attr_rfi_disable.attr,
+	&dev_attr_ddr_data_rate.attr,
+	&dev_attr_rfi_restriction.attr,
+	NULL
+};
+
+static const struct attribute_group dvfs_attribute_group = {
+	.attrs = dvfs_attrs,
+	.name = "dvfs"
+};
+
+int proc_thermal_rfim_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
+{
+	int ret;
+
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR) {
+		ret = sysfs_create_group(&pdev->dev.kobj, &fivr_attribute_group);
+		if (ret)
+			return ret;
+	}
+
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS) {
+		ret = sysfs_create_group(&pdev->dev.kobj, &dvfs_attribute_group);
+		if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR) {
+			sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_rfim_add);
+
+void proc_thermal_rfim_remove(struct pci_dev *pdev)
+{
+	struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR)
+		sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
+
+	if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS)
+		sysfs_remove_group(&pdev->dev.kobj, &dvfs_attribute_group);
+}
+EXPORT_SYMBOL_GPL(proc_thermal_rfim_remove);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/intel_bxt_pmic_thermal.c b/drivers/thermal/intel/intel_bxt_pmic_thermal.c
new file mode 100644
index 000000000..6312c6ba0
--- /dev/null
+++ b/drivers/thermal/intel/intel_bxt_pmic_thermal.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Broxton PMIC thermal driver
+ *
+ * Copyright (C) 2016 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+#define BXTWC_THRM0IRQ		0x4E04
+#define BXTWC_THRM1IRQ		0x4E05
+#define BXTWC_THRM2IRQ		0x4E06
+#define BXTWC_MTHRM0IRQ		0x4E12
+#define BXTWC_MTHRM1IRQ		0x4E13
+#define BXTWC_MTHRM2IRQ		0x4E14
+#define BXTWC_STHRM0IRQ		0x4F19
+#define BXTWC_STHRM1IRQ		0x4F1A
+#define BXTWC_STHRM2IRQ		0x4F1B
+
+struct trip_config_map {
+	u16 irq_reg;
+	u16 irq_en;
+	u16 evt_stat;
+	u8 irq_mask;
+	u8 irq_en_mask;
+	u8 evt_mask;
+	u8 trip_num;
+};
+
+struct thermal_irq_map {
+	char handle[20];
+	int num_trips;
+	const struct trip_config_map *trip_config;
+};
+
+struct pmic_thermal_data {
+	const struct thermal_irq_map *maps;
+	int num_maps;
+};
+
+static const struct trip_config_map bxtwc_str0_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x01,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x01,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x01,
+		.trip_num = 0
+	},
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x10,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x10,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x10,
+		.trip_num = 1
+	}
+};
+
+static const struct trip_config_map bxtwc_str1_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x02,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x02,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x02,
+		.trip_num = 0
+	},
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x20,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x20,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x20,
+		.trip_num = 1
+	},
+};
+
+static const struct trip_config_map bxtwc_str2_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x04,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x04,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x04,
+		.trip_num = 0
+	},
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x40,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x40,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x40,
+		.trip_num = 1
+	},
+};
+
+static const struct trip_config_map bxtwc_str3_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM2IRQ,
+		.irq_mask = 0x10,
+		.irq_en = BXTWC_MTHRM2IRQ,
+		.irq_en_mask = 0x10,
+		.evt_stat = BXTWC_STHRM2IRQ,
+		.evt_mask = 0x10,
+		.trip_num = 0
+	},
+};
+
+static const struct thermal_irq_map bxtwc_thermal_irq_map[] = {
+	{
+		.handle = "STR0",
+		.trip_config = bxtwc_str0_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str0_trip_config),
+	},
+	{
+		.handle = "STR1",
+		.trip_config = bxtwc_str1_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str1_trip_config),
+	},
+	{
+		.handle = "STR2",
+		.trip_config = bxtwc_str2_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str2_trip_config),
+	},
+	{
+		.handle = "STR3",
+		.trip_config = bxtwc_str3_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str3_trip_config),
+	},
+};
+
+static const struct pmic_thermal_data bxtwc_thermal_data = {
+	.maps = bxtwc_thermal_irq_map,
+	.num_maps = ARRAY_SIZE(bxtwc_thermal_irq_map),
+};
+
+static irqreturn_t pmic_thermal_irq_handler(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct thermal_zone_device *tzd;
+	struct pmic_thermal_data *td;
+	struct intel_soc_pmic *pmic;
+	struct regmap *regmap;
+	u8 reg_val, mask, irq_stat;
+	u16 reg, evt_stat_reg;
+	int i, j, ret;
+
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	regmap = pmic->regmap;
+	td = (struct pmic_thermal_data *)
+		platform_get_device_id(pdev)->driver_data;
+
+	/* Resolve thermal irqs */
+	for (i = 0; i < td->num_maps; i++) {
+		for (j = 0; j < td->maps[i].num_trips; j++) {
+			reg = td->maps[i].trip_config[j].irq_reg;
+			mask = td->maps[i].trip_config[j].irq_mask;
+			/*
+			 * Read the irq register to resolve whether the
+			 * interrupt was triggered for this sensor
+			 */
+			if (regmap_read(regmap, reg, &ret))
+				return IRQ_HANDLED;
+
+			reg_val = (u8)ret;
+			irq_stat = ((u8)ret & mask);
+
+			if (!irq_stat)
+				continue;
+
+			/*
+			 * Read the status register to find out what
+			 * event occurred i.e a high or a low
+			 */
+			evt_stat_reg = td->maps[i].trip_config[j].evt_stat;
+			if (regmap_read(regmap, evt_stat_reg, &ret))
+				return IRQ_HANDLED;
+
+			tzd = thermal_zone_get_zone_by_name(td->maps[i].handle);
+			if (!IS_ERR(tzd))
+				thermal_zone_device_update(tzd,
+						THERMAL_EVENT_UNSPECIFIED);
+
+			/* Clear the appropriate irq */
+			regmap_write(regmap, reg, reg_val & mask);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int pmic_thermal_probe(struct platform_device *pdev)
+{
+	struct regmap_irq_chip_data *regmap_irq_chip;
+	struct pmic_thermal_data *thermal_data;
+	int ret, irq, virq, i, j, pmic_irq_count;
+	struct intel_soc_pmic *pmic;
+	struct regmap *regmap;
+	struct device *dev;
+	u16 reg;
+	u8 mask;
+
+	dev = &pdev->dev;
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	if (!pmic) {
+		dev_err(dev, "Failed to get struct intel_soc_pmic pointer\n");
+		return -ENODEV;
+	}
+
+	thermal_data = (struct pmic_thermal_data *)
+				platform_get_device_id(pdev)->driver_data;
+	if (!thermal_data) {
+		dev_err(dev, "No thermal data initialized!!\n");
+		return -ENODEV;
+	}
+
+	regmap = pmic->regmap;
+	regmap_irq_chip = pmic->irq_chip_data;
+
+	pmic_irq_count = 0;
+	while ((irq = platform_get_irq(pdev, pmic_irq_count)) != -ENXIO) {
+		virq = regmap_irq_get_virq(regmap_irq_chip, irq);
+		if (virq < 0) {
+			dev_err(dev, "failed to get virq by irq %d\n", irq);
+			return virq;
+		}
+
+		ret = devm_request_threaded_irq(&pdev->dev, virq,
+				NULL, pmic_thermal_irq_handler,
+				IRQF_ONESHOT, "pmic_thermal", pdev);
+
+		if (ret) {
+			dev_err(dev, "request irq(%d) failed: %d\n", virq, ret);
+			return ret;
+		}
+		pmic_irq_count++;
+	}
+
+	/* Enable thermal interrupts */
+	for (i = 0; i < thermal_data->num_maps; i++) {
+		for (j = 0; j < thermal_data->maps[i].num_trips; j++) {
+			reg = thermal_data->maps[i].trip_config[j].irq_en;
+			mask = thermal_data->maps[i].trip_config[j].irq_en_mask;
+			ret = regmap_update_bits(regmap, reg, mask, 0x00);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id pmic_thermal_id_table[] = {
+	{
+		.name = "bxt_wcove_thermal",
+		.driver_data = (kernel_ulong_t)&bxtwc_thermal_data,
+	},
+	{},
+};
+
+static struct platform_driver pmic_thermal_driver = {
+	.probe = pmic_thermal_probe,
+	.driver = {
+		.name = "pmic_thermal",
+	},
+	.id_table = pmic_thermal_id_table,
+};
+
+MODULE_DEVICE_TABLE(platform, pmic_thermal_id_table);
+module_platform_driver(pmic_thermal_driver);
+
+MODULE_AUTHOR("Yegnesh S Iyer <yegnesh.s.iyer@intel.com>");
+MODULE_DESCRIPTION("Intel Broxton PMIC Thermal Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/intel_hfi.c b/drivers/thermal/intel/intel_hfi.c
new file mode 100644
index 000000000..750dab3f2
--- /dev/null
+++ b/drivers/thermal/intel/intel_hfi.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hardware Feedback Interface Driver
+ *
+ * Copyright (c) 2021, Intel Corporation.
+ *
+ * Authors: Aubrey Li <aubrey.li@linux.intel.com>
+ *          Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
+ *
+ *
+ * The Hardware Feedback Interface provides a performance and energy efficiency
+ * capability information for each CPU in the system. Depending on the processor
+ * model, hardware may periodically update these capabilities as a result of
+ * changes in the operating conditions (e.g., power limits or thermal
+ * constraints). On other processor models, there is a single HFI update
+ * at boot.
+ *
+ * This file provides functionality to process HFI updates and relay these
+ * updates to userspace.
+ */
+
+#define pr_fmt(fmt)  "intel-hfi: " fmt
+
+#include <linux/bitops.h>
+#include <linux/cpufeature.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/math.h>
+#include <linux/mutex.h>
+#include <linux/percpu-defs.h>
+#include <linux/printk.h>
+#include <linux/processor.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/suspend.h>
+#include <linux/string.h>
+#include <linux/syscore_ops.h>
+#include <linux/topology.h>
+#include <linux/workqueue.h>
+
+#include <asm/msr.h>
+
+#include "../thermal_core.h"
+#include "intel_hfi.h"
+
+#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | \
+				     BIT(9) | BIT(11) | BIT(26))
+
+/* Hardware Feedback Interface MSR configuration bits */
+#define HW_FEEDBACK_PTR_VALID_BIT		BIT(0)
+#define HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT	BIT(0)
+
+/* CPUID detection and enumeration definitions for HFI */
+
+#define CPUID_HFI_LEAF 6
+
+union hfi_capabilities {
+	struct {
+		u8	performance:1;
+		u8	energy_efficiency:1;
+		u8	__reserved:6;
+	} split;
+	u8 bits;
+};
+
+union cpuid6_edx {
+	struct {
+		union hfi_capabilities	capabilities;
+		u32			table_pages:4;
+		u32			__reserved:4;
+		s32			index:16;
+	} split;
+	u32 full;
+};
+
+/**
+ * struct hfi_cpu_data - HFI capabilities per CPU
+ * @perf_cap:		Performance capability
+ * @ee_cap:		Energy efficiency capability
+ *
+ * Capabilities of a logical processor in the HFI table. These capabilities are
+ * unitless.
+ */
+struct hfi_cpu_data {
+	u8	perf_cap;
+	u8	ee_cap;
+} __packed;
+
+/**
+ * struct hfi_hdr - Header of the HFI table
+ * @perf_updated:	Hardware updated performance capabilities
+ * @ee_updated:		Hardware updated energy efficiency capabilities
+ *
+ * Properties of the data in an HFI table.
+ */
+struct hfi_hdr {
+	u8	perf_updated;
+	u8	ee_updated;
+} __packed;
+
+/**
+ * struct hfi_instance - Representation of an HFI instance (i.e., a table)
+ * @local_table:	Base of the local copy of the HFI table
+ * @timestamp:		Timestamp of the last update of the local table.
+ *			Located at the base of the local table.
+ * @hdr:		Base address of the header of the local table
+ * @data:		Base address of the data of the local table
+ * @cpus:		CPUs represented in this HFI table instance
+ * @hw_table:		Pointer to the HFI table of this instance
+ * @update_work:	Delayed work to process HFI updates
+ * @table_lock:		Lock to protect acceses to the table of this instance
+ * @event_lock:		Lock to process HFI interrupts
+ *
+ * A set of parameters to parse and navigate a specific HFI table.
+ */
+struct hfi_instance {
+	union {
+		void			*local_table;
+		u64			*timestamp;
+	};
+	void			*hdr;
+	void			*data;
+	cpumask_var_t		cpus;
+	void			*hw_table;
+	struct delayed_work	update_work;
+	raw_spinlock_t		table_lock;
+	raw_spinlock_t		event_lock;
+};
+
+/**
+ * struct hfi_features - Supported HFI features
+ * @nr_table_pages:	Size of the HFI table in 4KB pages
+ * @cpu_stride:		Stride size to locate the capability data of a logical
+ *			processor within the table (i.e., row stride)
+ * @hdr_size:		Size of the table header
+ *
+ * Parameters and supported features that are common to all HFI instances
+ */
+struct hfi_features {
+	unsigned int	nr_table_pages;
+	unsigned int	cpu_stride;
+	unsigned int	hdr_size;
+};
+
+/**
+ * struct hfi_cpu_info - Per-CPU attributes to consume HFI data
+ * @index:		Row of this CPU in its HFI table
+ * @hfi_instance:	Attributes of the HFI table to which this CPU belongs
+ *
+ * Parameters to link a logical processor to an HFI table and a row within it.
+ */
+struct hfi_cpu_info {
+	s16			index;
+	struct hfi_instance	*hfi_instance;
+};
+
+static DEFINE_PER_CPU(struct hfi_cpu_info, hfi_cpu_info) = { .index = -1 };
+
+static int max_hfi_instances;
+static struct hfi_instance *hfi_instances;
+
+static struct hfi_features hfi_features;
+static DEFINE_MUTEX(hfi_instance_lock);
+
+static struct workqueue_struct *hfi_updates_wq;
+#define HFI_UPDATE_INTERVAL		HZ
+#define HFI_MAX_THERM_NOTIFY_COUNT	16
+
+static void get_hfi_caps(struct hfi_instance *hfi_instance,
+			 struct thermal_genl_cpu_caps *cpu_caps)
+{
+	int cpu, i = 0;
+
+	raw_spin_lock_irq(&hfi_instance->table_lock);
+	for_each_cpu(cpu, hfi_instance->cpus) {
+		struct hfi_cpu_data *caps;
+		s16 index;
+
+		index = per_cpu(hfi_cpu_info, cpu).index;
+		caps = hfi_instance->data + index * hfi_features.cpu_stride;
+		cpu_caps[i].cpu = cpu;
+
+		/*
+		 * Scale performance and energy efficiency to
+		 * the [0, 1023] interval that thermal netlink uses.
+		 */
+		cpu_caps[i].performance = caps->perf_cap << 2;
+		cpu_caps[i].efficiency = caps->ee_cap << 2;
+
+		++i;
+	}
+	raw_spin_unlock_irq(&hfi_instance->table_lock);
+}
+
+/*
+ * Call update_capabilities() when there are changes in the HFI table.
+ */
+static void update_capabilities(struct hfi_instance *hfi_instance)
+{
+	struct thermal_genl_cpu_caps *cpu_caps;
+	int i = 0, cpu_count;
+
+	/* CPUs may come online/offline while processing an HFI update. */
+	mutex_lock(&hfi_instance_lock);
+
+	cpu_count = cpumask_weight(hfi_instance->cpus);
+
+	/* No CPUs to report in this hfi_instance. */
+	if (!cpu_count)
+		goto out;
+
+	cpu_caps = kcalloc(cpu_count, sizeof(*cpu_caps), GFP_KERNEL);
+	if (!cpu_caps)
+		goto out;
+
+	get_hfi_caps(hfi_instance, cpu_caps);
+
+	if (cpu_count < HFI_MAX_THERM_NOTIFY_COUNT)
+		goto last_cmd;
+
+	/* Process complete chunks of HFI_MAX_THERM_NOTIFY_COUNT capabilities. */
+	for (i = 0;
+	     (i + HFI_MAX_THERM_NOTIFY_COUNT) <= cpu_count;
+	     i += HFI_MAX_THERM_NOTIFY_COUNT)
+		thermal_genl_cpu_capability_event(HFI_MAX_THERM_NOTIFY_COUNT,
+						  &cpu_caps[i]);
+
+	cpu_count = cpu_count - i;
+
+last_cmd:
+	/* Process the remaining capabilities if any. */
+	if (cpu_count)
+		thermal_genl_cpu_capability_event(cpu_count, &cpu_caps[i]);
+
+	kfree(cpu_caps);
+out:
+	mutex_unlock(&hfi_instance_lock);
+}
+
+static void hfi_update_work_fn(struct work_struct *work)
+{
+	struct hfi_instance *hfi_instance;
+
+	hfi_instance = container_of(to_delayed_work(work), struct hfi_instance,
+				    update_work);
+
+	update_capabilities(hfi_instance);
+}
+
+void intel_hfi_process_event(__u64 pkg_therm_status_msr_val)
+{
+	struct hfi_instance *hfi_instance;
+	int cpu = smp_processor_id();
+	struct hfi_cpu_info *info;
+	u64 new_timestamp;
+
+	if (!pkg_therm_status_msr_val)
+		return;
+
+	info = &per_cpu(hfi_cpu_info, cpu);
+	if (!info)
+		return;
+
+	/*
+	 * A CPU is linked to its HFI instance before the thermal vector in the
+	 * local APIC is unmasked. Hence, info->hfi_instance cannot be NULL
+	 * when receiving an HFI event.
+	 */
+	hfi_instance = info->hfi_instance;
+	if (unlikely(!hfi_instance)) {
+		pr_debug("Received event on CPU %d but instance was null", cpu);
+		return;
+	}
+
+	/*
+	 * On most systems, all CPUs in the package receive a package-level
+	 * thermal interrupt when there is an HFI update. It is sufficient to
+	 * let a single CPU to acknowledge the update and queue work to
+	 * process it. The remaining CPUs can resume their work.
+	 */
+	if (!raw_spin_trylock(&hfi_instance->event_lock))
+		return;
+
+	/* Skip duplicated updates. */
+	new_timestamp = *(u64 *)hfi_instance->hw_table;
+	if (*hfi_instance->timestamp == new_timestamp) {
+		raw_spin_unlock(&hfi_instance->event_lock);
+		return;
+	}
+
+	raw_spin_lock(&hfi_instance->table_lock);
+
+	/*
+	 * Copy the updated table into our local copy. This includes the new
+	 * timestamp.
+	 */
+	memcpy(hfi_instance->local_table, hfi_instance->hw_table,
+	       hfi_features.nr_table_pages << PAGE_SHIFT);
+
+	raw_spin_unlock(&hfi_instance->table_lock);
+	raw_spin_unlock(&hfi_instance->event_lock);
+
+	/*
+	 * Let hardware know that we are done reading the HFI table and it is
+	 * free to update it again.
+	 */
+	pkg_therm_status_msr_val &= THERM_STATUS_CLEAR_PKG_MASK &
+				    ~PACKAGE_THERM_STATUS_HFI_UPDATED;
+	wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, pkg_therm_status_msr_val);
+
+	queue_delayed_work(hfi_updates_wq, &hfi_instance->update_work,
+			   HFI_UPDATE_INTERVAL);
+}
+
+static void init_hfi_cpu_index(struct hfi_cpu_info *info)
+{
+	union cpuid6_edx edx;
+
+	/* Do not re-read @cpu's index if it has already been initialized. */
+	if (info->index > -1)
+		return;
+
+	edx.full = cpuid_edx(CPUID_HFI_LEAF);
+	info->index = edx.split.index;
+}
+
+/*
+ * The format of the HFI table depends on the number of capabilities that the
+ * hardware supports. Keep a data structure to navigate the table.
+ */
+static void init_hfi_instance(struct hfi_instance *hfi_instance)
+{
+	/* The HFI header is below the time-stamp. */
+	hfi_instance->hdr = hfi_instance->local_table +
+			    sizeof(*hfi_instance->timestamp);
+
+	/* The HFI data starts below the header. */
+	hfi_instance->data = hfi_instance->hdr + hfi_features.hdr_size;
+}
+
+/* Caller must hold hfi_instance_lock. */
+static void hfi_enable(void)
+{
+	u64 msr_val;
+
+	rdmsrl(MSR_IA32_HW_FEEDBACK_CONFIG, msr_val);
+	msr_val |= HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT;
+	wrmsrl(MSR_IA32_HW_FEEDBACK_CONFIG, msr_val);
+}
+
+static void hfi_set_hw_table(struct hfi_instance *hfi_instance)
+{
+	phys_addr_t hw_table_pa;
+	u64 msr_val;
+
+	hw_table_pa = virt_to_phys(hfi_instance->hw_table);
+	msr_val = hw_table_pa | HW_FEEDBACK_PTR_VALID_BIT;
+	wrmsrl(MSR_IA32_HW_FEEDBACK_PTR, msr_val);
+}
+
+/* Caller must hold hfi_instance_lock. */
+static void hfi_disable(void)
+{
+	u64 msr_val;
+	int i;
+
+	rdmsrl(MSR_IA32_HW_FEEDBACK_CONFIG, msr_val);
+	msr_val &= ~HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT;
+	wrmsrl(MSR_IA32_HW_FEEDBACK_CONFIG, msr_val);
+
+	/*
+	 * Wait for hardware to acknowledge the disabling of HFI. Some
+	 * processors may not do it. Wait for ~2ms. This is a reasonable
+	 * time for hardware to complete any pending actions on the HFI
+	 * memory.
+	 */
+	for (i = 0; i < 2000; i++) {
+		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
+		if (msr_val & PACKAGE_THERM_STATUS_HFI_UPDATED)
+			break;
+
+		udelay(1);
+		cpu_relax();
+	}
+}
+
+/**
+ * intel_hfi_online() - Enable HFI on @cpu
+ * @cpu:	CPU in which the HFI will be enabled
+ *
+ * Enable the HFI to be used in @cpu. The HFI is enabled at the die/package
+ * level. The first CPU in the die/package to come online does the full HFI
+ * initialization. Subsequent CPUs will just link themselves to the HFI
+ * instance of their die/package.
+ *
+ * This function is called before enabling the thermal vector in the local APIC
+ * in order to ensure that @cpu has an associated HFI instance when it receives
+ * an HFI event.
+ */
+void intel_hfi_online(unsigned int cpu)
+{
+	struct hfi_instance *hfi_instance;
+	struct hfi_cpu_info *info;
+	u16 die_id;
+
+	/* Nothing to do if hfi_instances are missing. */
+	if (!hfi_instances)
+		return;
+
+	/*
+	 * Link @cpu to the HFI instance of its package/die. It does not
+	 * matter whether the instance has been initialized.
+	 */
+	info = &per_cpu(hfi_cpu_info, cpu);
+	die_id = topology_logical_die_id(cpu);
+	hfi_instance = info->hfi_instance;
+	if (!hfi_instance) {
+		if (die_id < 0 || die_id >= max_hfi_instances)
+			return;
+
+		hfi_instance = &hfi_instances[die_id];
+		info->hfi_instance = hfi_instance;
+	}
+
+	init_hfi_cpu_index(info);
+
+	/*
+	 * Now check if the HFI instance of the package/die of @cpu has been
+	 * initialized (by checking its header). In such case, all we have to
+	 * do is to add @cpu to this instance's cpumask.
+	 */
+	mutex_lock(&hfi_instance_lock);
+	if (hfi_instance->hdr) {
+		cpumask_set_cpu(cpu, hfi_instance->cpus);
+		goto unlock;
+	}
+
+	/*
+	 * Hardware is programmed with the physical address of the first page
+	 * frame of the table. Hence, the allocated memory must be page-aligned.
+	 *
+	 * Some processors do not forget the initial address of the HFI table
+	 * even after having been reprogrammed. Keep using the same pages. Do
+	 * not free them.
+	 */
+	hfi_instance->hw_table = alloc_pages_exact(hfi_features.nr_table_pages,
+						   GFP_KERNEL | __GFP_ZERO);
+	if (!hfi_instance->hw_table)
+		goto unlock;
+
+	/*
+	 * Allocate memory to keep a local copy of the table that
+	 * hardware generates.
+	 */
+	hfi_instance->local_table = kzalloc(hfi_features.nr_table_pages << PAGE_SHIFT,
+					    GFP_KERNEL);
+	if (!hfi_instance->local_table)
+		goto free_hw_table;
+
+	init_hfi_instance(hfi_instance);
+
+	INIT_DELAYED_WORK(&hfi_instance->update_work, hfi_update_work_fn);
+	raw_spin_lock_init(&hfi_instance->table_lock);
+	raw_spin_lock_init(&hfi_instance->event_lock);
+
+	cpumask_set_cpu(cpu, hfi_instance->cpus);
+
+	hfi_set_hw_table(hfi_instance);
+	hfi_enable();
+
+unlock:
+	mutex_unlock(&hfi_instance_lock);
+	return;
+
+free_hw_table:
+	free_pages_exact(hfi_instance->hw_table, hfi_features.nr_table_pages);
+	goto unlock;
+}
+
+/**
+ * intel_hfi_offline() - Disable HFI on @cpu
+ * @cpu:	CPU in which the HFI will be disabled
+ *
+ * Remove @cpu from those covered by its HFI instance.
+ *
+ * On some processors, hardware remembers previous programming settings even
+ * after being reprogrammed. Thus, keep HFI enabled even if all CPUs in the
+ * die/package of @cpu are offline. See note in intel_hfi_online().
+ */
+void intel_hfi_offline(unsigned int cpu)
+{
+	struct hfi_cpu_info *info = &per_cpu(hfi_cpu_info, cpu);
+	struct hfi_instance *hfi_instance;
+
+	/*
+	 * Check if @cpu as an associated, initialized (i.e., with a non-NULL
+	 * header). Also, HFI instances are only initialized if X86_FEATURE_HFI
+	 * is present.
+	 */
+	hfi_instance = info->hfi_instance;
+	if (!hfi_instance)
+		return;
+
+	if (!hfi_instance->hdr)
+		return;
+
+	mutex_lock(&hfi_instance_lock);
+	cpumask_clear_cpu(cpu, hfi_instance->cpus);
+
+	if (!cpumask_weight(hfi_instance->cpus))
+		hfi_disable();
+
+	mutex_unlock(&hfi_instance_lock);
+}
+
+static __init int hfi_parse_features(void)
+{
+	unsigned int nr_capabilities;
+	union cpuid6_edx edx;
+
+	if (!boot_cpu_has(X86_FEATURE_HFI))
+		return -ENODEV;
+
+	/*
+	 * If we are here we know that CPUID_HFI_LEAF exists. Parse the
+	 * supported capabilities and the size of the HFI table.
+	 */
+	edx.full = cpuid_edx(CPUID_HFI_LEAF);
+
+	if (!edx.split.capabilities.split.performance) {
+		pr_debug("Performance reporting not supported! Not using HFI\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * The number of supported capabilities determines the number of
+	 * columns in the HFI table. Exclude the reserved bits.
+	 */
+	edx.split.capabilities.split.__reserved = 0;
+	nr_capabilities = hweight8(edx.split.capabilities.bits);
+
+	/* The number of 4KB pages required by the table */
+	hfi_features.nr_table_pages = edx.split.table_pages + 1;
+
+	/*
+	 * The header contains change indications for each supported feature.
+	 * The size of the table header is rounded up to be a multiple of 8
+	 * bytes.
+	 */
+	hfi_features.hdr_size = DIV_ROUND_UP(nr_capabilities, 8) * 8;
+
+	/*
+	 * Data of each logical processor is also rounded up to be a multiple
+	 * of 8 bytes.
+	 */
+	hfi_features.cpu_stride = DIV_ROUND_UP(nr_capabilities, 8) * 8;
+
+	return 0;
+}
+
+static void hfi_do_enable(void)
+{
+	/* This code runs only on the boot CPU. */
+	struct hfi_cpu_info *info = &per_cpu(hfi_cpu_info, 0);
+	struct hfi_instance *hfi_instance = info->hfi_instance;
+
+	/* No locking needed. There is no concurrency with CPU online. */
+	hfi_set_hw_table(hfi_instance);
+	hfi_enable();
+}
+
+static int hfi_do_disable(void)
+{
+	/* No locking needed. There is no concurrency with CPU offline. */
+	hfi_disable();
+
+	return 0;
+}
+
+static struct syscore_ops hfi_pm_ops = {
+	.resume = hfi_do_enable,
+	.suspend = hfi_do_disable,
+};
+
+void __init intel_hfi_init(void)
+{
+	struct hfi_instance *hfi_instance;
+	int i, j;
+
+	if (hfi_parse_features())
+		return;
+
+	/* There is one HFI instance per die/package. */
+	max_hfi_instances = topology_max_packages() *
+			    topology_max_die_per_package();
+
+	/*
+	 * This allocation may fail. CPU hotplug callbacks must check
+	 * for a null pointer.
+	 */
+	hfi_instances = kcalloc(max_hfi_instances, sizeof(*hfi_instances),
+				GFP_KERNEL);
+	if (!hfi_instances)
+		return;
+
+	for (i = 0; i < max_hfi_instances; i++) {
+		hfi_instance = &hfi_instances[i];
+		if (!zalloc_cpumask_var(&hfi_instance->cpus, GFP_KERNEL))
+			goto err_nomem;
+	}
+
+	hfi_updates_wq = create_singlethread_workqueue("hfi-updates");
+	if (!hfi_updates_wq)
+		goto err_nomem;
+
+	register_syscore_ops(&hfi_pm_ops);
+
+	return;
+
+err_nomem:
+	for (j = 0; j < i; ++j) {
+		hfi_instance = &hfi_instances[j];
+		free_cpumask_var(hfi_instance->cpus);
+	}
+
+	kfree(hfi_instances);
+	hfi_instances = NULL;
+}
diff --git a/drivers/thermal/intel/intel_hfi.h b/drivers/thermal/intel/intel_hfi.h
new file mode 100644
index 000000000..325aa78b7
--- /dev/null
+++ b/drivers/thermal/intel/intel_hfi.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _INTEL_HFI_H
+#define _INTEL_HFI_H
+
+#if defined(CONFIG_INTEL_HFI_THERMAL)
+void __init intel_hfi_init(void);
+void intel_hfi_online(unsigned int cpu);
+void intel_hfi_offline(unsigned int cpu);
+void intel_hfi_process_event(__u64 pkg_therm_status_msr_val);
+#else
+static inline void intel_hfi_init(void) { }
+static inline void intel_hfi_online(unsigned int cpu) { }
+static inline void intel_hfi_offline(unsigned int cpu) { }
+static inline void intel_hfi_process_event(__u64 pkg_therm_status_msr_val) { }
+#endif /* CONFIG_INTEL_HFI_THERMAL */
+
+#endif /* _INTEL_HFI_H */
diff --git a/drivers/thermal/intel/intel_menlow.c b/drivers/thermal/intel/intel_menlow.c
new file mode 100644
index 000000000..101d7e791
--- /dev/null
+++ b/drivers/thermal/intel/intel_menlow.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Intel menlow Driver for thermal management extension
+ *
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *
+ *  This driver creates the sys I/F for programming the sensors.
+ *  It also implements the driver for intel menlow memory controller (hardware
+ *  id is INT0002) which makes use of the platform specific ACPI methods
+ *  to get/set bandwidth.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+MODULE_AUTHOR("Thomas Sujith");
+MODULE_AUTHOR("Zhang Rui");
+MODULE_DESCRIPTION("Intel Menlow platform specific driver");
+MODULE_LICENSE("GPL v2");
+
+/*
+ * Memory controller device control
+ */
+
+#define MEMORY_GET_BANDWIDTH "GTHS"
+#define MEMORY_SET_BANDWIDTH "STHS"
+#define MEMORY_ARG_CUR_BANDWIDTH 1
+#define MEMORY_ARG_MAX_BANDWIDTH 0
+
+static void intel_menlow_unregister_sensor(void);
+
+/*
+ * GTHS returning 'n' would mean that [0,n-1] states are supported
+ * In that case max_cstate would be n-1
+ * GTHS returning '0' would mean that no bandwidth control states are supported
+ */
+static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev,
+				    unsigned long *max_state)
+{
+	struct acpi_device *device = cdev->devdata;
+	acpi_handle handle = device->handle;
+	unsigned long long value;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status = AE_OK;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = MEMORY_ARG_MAX_BANDWIDTH;
+	status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
+				       &arg_list, &value);
+	if (ACPI_FAILURE(status))
+		return -EFAULT;
+
+	if (!value)
+		return -EINVAL;
+
+	*max_state = value - 1;
+	return 0;
+}
+
+static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev,
+				    unsigned long *value)
+{
+	struct acpi_device *device = cdev->devdata;
+	acpi_handle handle = device->handle;
+	unsigned long long result;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status = AE_OK;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = MEMORY_ARG_CUR_BANDWIDTH;
+	status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
+				       &arg_list, &result);
+	if (ACPI_FAILURE(status))
+		return -EFAULT;
+
+	*value = result;
+	return 0;
+}
+
+static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
+				    unsigned long state)
+{
+	struct acpi_device *device = cdev->devdata;
+	acpi_handle handle = device->handle;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status;
+	unsigned long long temp;
+	unsigned long max_state;
+
+	if (memory_get_max_bandwidth(cdev, &max_state))
+		return -EFAULT;
+
+	if (state > max_state)
+		return -EINVAL;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = state;
+
+	status =
+	    acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
+				  &temp);
+
+	pr_info("Bandwidth value was %ld: status is %d\n", state, status);
+	if (ACPI_FAILURE(status))
+		return -EFAULT;
+
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops memory_cooling_ops = {
+	.get_max_state = memory_get_max_bandwidth,
+	.get_cur_state = memory_get_cur_bandwidth,
+	.set_cur_state = memory_set_cur_bandwidth,
+};
+
+/*
+ * Memory Device Management
+ */
+static int intel_menlow_memory_add(struct acpi_device *device)
+{
+	int result = -ENODEV;
+	struct thermal_cooling_device *cdev;
+
+	if (!device)
+		return -EINVAL;
+
+	if (!acpi_has_method(device->handle, MEMORY_GET_BANDWIDTH))
+		goto end;
+
+	if (!acpi_has_method(device->handle, MEMORY_SET_BANDWIDTH))
+		goto end;
+
+	cdev = thermal_cooling_device_register("Memory controller", device,
+					       &memory_cooling_ops);
+	if (IS_ERR(cdev)) {
+		result = PTR_ERR(cdev);
+		goto end;
+	}
+
+	device->driver_data = cdev;
+	result = sysfs_create_link(&device->dev.kobj,
+				&cdev->device.kobj, "thermal_cooling");
+	if (result)
+		goto unregister;
+
+	result = sysfs_create_link(&cdev->device.kobj,
+				&device->dev.kobj, "device");
+	if (result) {
+		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+		goto unregister;
+	}
+
+ end:
+	return result;
+
+ unregister:
+	thermal_cooling_device_unregister(cdev);
+	return result;
+
+}
+
+static int intel_menlow_memory_remove(struct acpi_device *device)
+{
+	struct thermal_cooling_device *cdev;
+
+	if (!device)
+		return -EINVAL;
+
+	cdev = acpi_driver_data(device);
+	if (!cdev)
+		return -EINVAL;
+
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+	sysfs_remove_link(&cdev->device.kobj, "device");
+	thermal_cooling_device_unregister(cdev);
+
+	return 0;
+}
+
+static const struct acpi_device_id intel_menlow_memory_ids[] = {
+	{"INT0002", 0},
+	{"", 0},
+};
+
+static struct acpi_driver intel_menlow_memory_driver = {
+	.name = "intel_menlow_thermal_control",
+	.ids = intel_menlow_memory_ids,
+	.ops = {
+		.add = intel_menlow_memory_add,
+		.remove = intel_menlow_memory_remove,
+		},
+};
+
+/*
+ * Sensor control on menlow platform
+ */
+
+#define THERMAL_AUX0 0
+#define THERMAL_AUX1 1
+#define GET_AUX0 "GAX0"
+#define GET_AUX1 "GAX1"
+#define SET_AUX0 "SAX0"
+#define SET_AUX1 "SAX1"
+
+struct intel_menlow_attribute {
+	struct device_attribute attr;
+	struct device *device;
+	acpi_handle handle;
+	struct list_head node;
+};
+
+static LIST_HEAD(intel_menlow_attr_list);
+static DEFINE_MUTEX(intel_menlow_attr_lock);
+
+/*
+ * sensor_get_auxtrip - get the current auxtrip value from sensor
+ * @name: Thermalzone name
+ * @auxtype : AUX0/AUX1
+ * @buf: syfs buffer
+ */
+static int sensor_get_auxtrip(acpi_handle handle, int index,
+							unsigned long long *value)
+{
+	acpi_status status;
+
+	if ((index != 0 && index != 1) || !value)
+		return -EINVAL;
+
+	status = acpi_evaluate_integer(handle, index ? GET_AUX1 : GET_AUX0,
+				       NULL, value);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * sensor_set_auxtrip - set the new auxtrip value to sensor
+ * @name: Thermalzone name
+ * @auxtype : AUX0/AUX1
+ * @buf: syfs buffer
+ */
+static int sensor_set_auxtrip(acpi_handle handle, int index, int value)
+{
+	acpi_status status;
+	union acpi_object arg = {
+		ACPI_TYPE_INTEGER
+	};
+	struct acpi_object_list args = {
+		1, &arg
+	};
+	unsigned long long temp;
+
+	if (index != 0 && index != 1)
+		return -EINVAL;
+
+	status = acpi_evaluate_integer(handle, index ? GET_AUX0 : GET_AUX1,
+				       NULL, &temp);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+	if ((index && value < temp) || (!index && value > temp))
+		return -EINVAL;
+
+	arg.integer.value = value;
+	status = acpi_evaluate_integer(handle, index ? SET_AUX1 : SET_AUX0,
+				       &args, &temp);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	/* do we need to check the return value of SAX0/SAX1 ? */
+
+	return 0;
+}
+
+#define to_intel_menlow_attr(_attr)	\
+	container_of(_attr, struct intel_menlow_attribute, attr)
+
+static ssize_t aux_show(struct device *dev, struct device_attribute *dev_attr,
+			char *buf, int idx)
+{
+	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+	unsigned long long value;
+	int result;
+
+	result = sensor_get_auxtrip(attr->handle, idx, &value);
+	if (result)
+		return result;
+
+	return sprintf(buf, "%lu", deci_kelvin_to_celsius(value));
+}
+
+static ssize_t aux0_show(struct device *dev,
+			 struct device_attribute *dev_attr, char *buf)
+{
+	return aux_show(dev, dev_attr, buf, 0);
+}
+
+static ssize_t aux1_show(struct device *dev,
+			 struct device_attribute *dev_attr, char *buf)
+{
+	return aux_show(dev, dev_attr, buf, 1);
+}
+
+static ssize_t aux_store(struct device *dev, struct device_attribute *dev_attr,
+			 const char *buf, size_t count, int idx)
+{
+	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+	int value;
+	int result;
+
+	/*Sanity check; should be a positive integer */
+	if (!sscanf(buf, "%d", &value))
+		return -EINVAL;
+
+	if (value < 0)
+		return -EINVAL;
+
+	result = sensor_set_auxtrip(attr->handle, idx,
+				    celsius_to_deci_kelvin(value));
+	return result ? result : count;
+}
+
+static ssize_t aux0_store(struct device *dev,
+			  struct device_attribute *dev_attr,
+			  const char *buf, size_t count)
+{
+	return aux_store(dev, dev_attr, buf, count, 0);
+}
+
+static ssize_t aux1_store(struct device *dev,
+			  struct device_attribute *dev_attr,
+			  const char *buf, size_t count)
+{
+	return aux_store(dev, dev_attr, buf, count, 1);
+}
+
+/* BIOS can enable/disable the thermal user application in dabney platform */
+#define BIOS_ENABLED "\\_TZ.GSTS"
+static ssize_t bios_enabled_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	acpi_status status;
+	unsigned long long bios_enabled;
+
+	status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &bios_enabled);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	return sprintf(buf, "%s\n", bios_enabled ? "enabled" : "disabled");
+}
+
+static int intel_menlow_add_one_attribute(char *name, umode_t mode, void *show,
+					  void *store, struct device *dev,
+					  acpi_handle handle)
+{
+	struct intel_menlow_attribute *attr;
+	int result;
+
+	attr = kzalloc(sizeof(struct intel_menlow_attribute), GFP_KERNEL);
+	if (!attr)
+		return -ENOMEM;
+
+	sysfs_attr_init(&attr->attr.attr); /* That is consistent naming :D */
+	attr->attr.attr.name = name;
+	attr->attr.attr.mode = mode;
+	attr->attr.show = show;
+	attr->attr.store = store;
+	attr->device = dev;
+	attr->handle = handle;
+
+	result = device_create_file(dev, &attr->attr);
+	if (result) {
+		kfree(attr);
+		return result;
+	}
+
+	mutex_lock(&intel_menlow_attr_lock);
+	list_add_tail(&attr->node, &intel_menlow_attr_list);
+	mutex_unlock(&intel_menlow_attr_lock);
+
+	return 0;
+}
+
+static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
+						void *context, void **rv)
+{
+	acpi_status status;
+	acpi_handle dummy;
+	struct thermal_zone_device *thermal;
+	int result;
+
+	result = acpi_bus_get_private_data(handle, (void **)&thermal);
+	if (result)
+		return 0;
+
+	/* _TZ must have the AUX0/1 methods */
+	status = acpi_get_handle(handle, GET_AUX0, &dummy);
+	if (ACPI_FAILURE(status))
+		return (status == AE_NOT_FOUND) ? AE_OK : status;
+
+	status = acpi_get_handle(handle, SET_AUX0, &dummy);
+	if (ACPI_FAILURE(status))
+		return (status == AE_NOT_FOUND) ? AE_OK : status;
+
+	result = intel_menlow_add_one_attribute("aux0", 0644,
+						aux0_show, aux0_store,
+						&thermal->device, handle);
+	if (result)
+		return AE_ERROR;
+
+	status = acpi_get_handle(handle, GET_AUX1, &dummy);
+	if (ACPI_FAILURE(status))
+		goto aux1_not_found;
+
+	status = acpi_get_handle(handle, SET_AUX1, &dummy);
+	if (ACPI_FAILURE(status))
+		goto aux1_not_found;
+
+	result = intel_menlow_add_one_attribute("aux1", 0644,
+						aux1_show, aux1_store,
+						&thermal->device, handle);
+	if (result) {
+		intel_menlow_unregister_sensor();
+		return AE_ERROR;
+	}
+
+	/*
+	 * create the "dabney_enabled" attribute which means the user app
+	 * should be loaded or not
+	 */
+
+	result = intel_menlow_add_one_attribute("bios_enabled", 0444,
+						bios_enabled_show, NULL,
+						&thermal->device, handle);
+	if (result) {
+		intel_menlow_unregister_sensor();
+		return AE_ERROR;
+	}
+
+	return AE_OK;
+
+ aux1_not_found:
+	if (status == AE_NOT_FOUND)
+		return AE_OK;
+
+	intel_menlow_unregister_sensor();
+	return status;
+}
+
+static void intel_menlow_unregister_sensor(void)
+{
+	struct intel_menlow_attribute *pos, *next;
+
+	mutex_lock(&intel_menlow_attr_lock);
+	list_for_each_entry_safe(pos, next, &intel_menlow_attr_list, node) {
+		list_del(&pos->node);
+		device_remove_file(pos->device, &pos->attr);
+		kfree(pos);
+	}
+	mutex_unlock(&intel_menlow_attr_lock);
+
+	return;
+}
+
+static int __init intel_menlow_module_init(void)
+{
+	int result = -ENODEV;
+	acpi_status status;
+	unsigned long long enable;
+
+	if (acpi_disabled)
+		return result;
+
+	/* Looking for the \_TZ.GSTS method */
+	status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &enable);
+	if (ACPI_FAILURE(status) || !enable)
+		return -ENODEV;
+
+	/* Looking for ACPI device MEM0 with hardware id INT0002 */
+	result = acpi_bus_register_driver(&intel_menlow_memory_driver);
+	if (result)
+		return result;
+
+	/* Looking for sensors in each ACPI thermal zone */
+	status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
+				     ACPI_UINT32_MAX,
+				     intel_menlow_register_sensor, NULL, NULL, NULL);
+	if (ACPI_FAILURE(status)) {
+		acpi_bus_unregister_driver(&intel_menlow_memory_driver);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit intel_menlow_module_exit(void)
+{
+	acpi_bus_unregister_driver(&intel_menlow_memory_driver);
+	intel_menlow_unregister_sensor();
+}
+
+module_init(intel_menlow_module_init);
+module_exit(intel_menlow_module_exit);
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
new file mode 100644
index 000000000..9e27f430e
--- /dev/null
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* intel_pch_thermal.c - Intel PCH Thermal driver
+ *
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * Authors:
+ *     Tushar Dave <tushar.n.dave@intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+/* Intel PCH thermal Device IDs */
+#define PCH_THERMAL_DID_HSW_1	0x9C24 /* Haswell PCH */
+#define PCH_THERMAL_DID_HSW_2	0x8C24 /* Haswell PCH */
+#define PCH_THERMAL_DID_WPT	0x9CA4 /* Wildcat Point */
+#define PCH_THERMAL_DID_SKL	0x9D31 /* Skylake PCH */
+#define PCH_THERMAL_DID_SKL_H	0xA131 /* Skylake PCH 100 series */
+#define PCH_THERMAL_DID_CNL	0x9Df9 /* CNL PCH */
+#define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
+#define PCH_THERMAL_DID_CNL_LP	0x02F9 /* CNL-LP PCH */
+#define PCH_THERMAL_DID_CML_H	0X06F9 /* CML-H PCH */
+#define PCH_THERMAL_DID_LWB	0xA1B1 /* Lewisburg PCH */
+#define PCH_THERMAL_DID_WBG	0x8D24 /* Wellsburg PCH */
+
+/* Wildcat Point-LP  PCH Thermal registers */
+#define WPT_TEMP	0x0000	/* Temperature */
+#define WPT_TSC	0x04	/* Thermal Sensor Control */
+#define WPT_TSS	0x06	/* Thermal Sensor Status */
+#define WPT_TSEL	0x08	/* Thermal Sensor Enable and Lock */
+#define WPT_TSREL	0x0A	/* Thermal Sensor Report Enable and Lock */
+#define WPT_TSMIC	0x0C	/* Thermal Sensor SMI Control */
+#define WPT_CTT	0x0010	/* Catastrophic Trip Point */
+#define WPT_TSPM	0x001C	/* Thermal Sensor Power Management */
+#define WPT_TAHV	0x0014	/* Thermal Alert High Value */
+#define WPT_TALV	0x0018	/* Thermal Alert Low Value */
+#define WPT_TL		0x00000040	/* Throttle Value */
+#define WPT_PHL	0x0060	/* PCH Hot Level */
+#define WPT_PHLC	0x62	/* PHL Control */
+#define WPT_TAS	0x80	/* Thermal Alert Status */
+#define WPT_TSPIEN	0x82	/* PCI Interrupt Event Enables */
+#define WPT_TSGPEN	0x84	/* General Purpose Event Enables */
+
+/*  Wildcat Point-LP  PCH Thermal Register bit definitions */
+#define WPT_TEMP_TSR	0x01ff	/* Temp TS Reading */
+#define WPT_TSC_CPDE	0x01	/* Catastrophic Power-Down Enable */
+#define WPT_TSS_TSDSS	0x10	/* Thermal Sensor Dynamic Shutdown Status */
+#define WPT_TSS_GPES	0x08	/* GPE status */
+#define WPT_TSEL_ETS	0x01    /* Enable TS */
+#define WPT_TSEL_PLDB	0x80	/* TSEL Policy Lock-Down Bit */
+#define WPT_TL_TOL	0x000001FF	/* T0 Level */
+#define WPT_TL_T1L	0x1ff00000	/* T1 Level */
+#define WPT_TL_TTEN	0x20000000	/* TT Enable */
+
+/* Resolution of 1/2 degree C and an offset of -50C */
+#define PCH_TEMP_OFFSET	(-50)
+#define GET_WPT_TEMP(x)	((x) * MILLIDEGREE_PER_DEGREE / 2 + WPT_TEMP_OFFSET)
+#define WPT_TEMP_OFFSET	(PCH_TEMP_OFFSET * MILLIDEGREE_PER_DEGREE)
+#define GET_PCH_TEMP(x)	(((x) / 2) + PCH_TEMP_OFFSET)
+
+/* Amount of time for each cooling delay, 100ms by default for now */
+static unsigned int delay_timeout = 100;
+module_param(delay_timeout, int, 0644);
+MODULE_PARM_DESC(delay_timeout, "amount of time delay for each iteration.");
+
+/* Number of iterations for cooling delay, 600 counts by default for now */
+static unsigned int delay_cnt = 600;
+module_param(delay_cnt, int, 0644);
+MODULE_PARM_DESC(delay_cnt, "total number of iterations for time delay.");
+
+static char driver_name[] = "Intel PCH thermal driver";
+
+struct pch_thermal_device {
+	void __iomem *hw_base;
+	const struct pch_dev_ops *ops;
+	struct pci_dev *pdev;
+	struct thermal_zone_device *tzd;
+	int crt_trip_id;
+	unsigned long crt_temp;
+	int hot_trip_id;
+	unsigned long hot_temp;
+	int psv_trip_id;
+	unsigned long psv_temp;
+	bool bios_enabled;
+};
+
+#ifdef CONFIG_ACPI
+
+/*
+ * On some platforms, there is a companion ACPI device, which adds
+ * passive trip temperature using _PSV method. There is no specific
+ * passive temperature setting in MMIO interface of this PCI device.
+ */
+static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
+				      int *nr_trips)
+{
+	struct acpi_device *adev;
+
+	ptd->psv_trip_id = -1;
+
+	adev = ACPI_COMPANION(&ptd->pdev->dev);
+	if (adev) {
+		unsigned long long r;
+		acpi_status status;
+
+		status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
+					       &r);
+		if (ACPI_SUCCESS(status)) {
+			unsigned long trip_temp;
+
+			trip_temp = deci_kelvin_to_millicelsius(r);
+			if (trip_temp) {
+				ptd->psv_temp = trip_temp;
+				ptd->psv_trip_id = *nr_trips;
+				++(*nr_trips);
+			}
+		}
+	}
+}
+#else
+static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
+				      int *nr_trips)
+{
+	ptd->psv_trip_id = -1;
+
+}
+#endif
+
+static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
+{
+	u8 tsel;
+	u16 trip_temp;
+
+	*nr_trips = 0;
+
+	/* Check if BIOS has already enabled thermal sensor */
+	if (WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL)) {
+		ptd->bios_enabled = true;
+		goto read_trips;
+	}
+
+	tsel = readb(ptd->hw_base + WPT_TSEL);
+	/*
+	 * When TSEL's Policy Lock-Down bit is 1, TSEL become RO.
+	 * If so, thermal sensor cannot enable. Bail out.
+	 */
+	if (tsel & WPT_TSEL_PLDB) {
+		dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
+		return -ENODEV;
+	}
+
+	writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
+	if (!(WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL))) {
+		dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
+		return -ENODEV;
+	}
+
+read_trips:
+	ptd->crt_trip_id = -1;
+	trip_temp = readw(ptd->hw_base + WPT_CTT);
+	trip_temp &= 0x1FF;
+	if (trip_temp) {
+		ptd->crt_temp = GET_WPT_TEMP(trip_temp);
+		ptd->crt_trip_id = 0;
+		++(*nr_trips);
+	}
+
+	ptd->hot_trip_id = -1;
+	trip_temp = readw(ptd->hw_base + WPT_PHL);
+	trip_temp &= 0x1FF;
+	if (trip_temp) {
+		ptd->hot_temp = GET_WPT_TEMP(trip_temp);
+		ptd->hot_trip_id = *nr_trips;
+		++(*nr_trips);
+	}
+
+	pch_wpt_add_acpi_psv_trip(ptd, nr_trips);
+
+	return 0;
+}
+
+static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp)
+{
+	*temp = GET_WPT_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP));
+
+	return 0;
+}
+
+/* Cool the PCH when it's overheat in .suspend_noirq phase */
+static int pch_wpt_suspend(struct pch_thermal_device *ptd)
+{
+	u8 tsel;
+	int pch_delay_cnt = 0;
+	u16 pch_thr_temp, pch_cur_temp;
+
+	/* Shutdown the thermal sensor if it is not enabled by BIOS */
+	if (!ptd->bios_enabled) {
+		tsel = readb(ptd->hw_base + WPT_TSEL);
+		writeb(tsel & 0xFE, ptd->hw_base + WPT_TSEL);
+		return 0;
+	}
+
+	/* Do not check temperature if it is not s2idle */
+	if (pm_suspend_via_firmware())
+		return 0;
+
+	/* Get the PCH temperature threshold value */
+	pch_thr_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TSPM));
+
+	/* Get the PCH current temperature value */
+	pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP));
+
+	/*
+	 * If current PCH temperature is higher than configured PCH threshold
+	 * value, run some delay loop with sleep to let the current temperature
+	 * go down below the threshold value which helps to allow system enter
+	 * lower power S0ix suspend state. Even after delay loop if PCH current
+	 * temperature stays above threshold, notify the warning message
+	 * which helps to indentify the reason why S0ix entry was rejected.
+	 */
+	while (pch_delay_cnt < delay_cnt) {
+		if (pch_cur_temp < pch_thr_temp)
+			break;
+
+		if (pm_wakeup_pending()) {
+			dev_warn(&ptd->pdev->dev, "Wakeup event detected, abort cooling\n");
+			return 0;
+		}
+
+		pch_delay_cnt++;
+		dev_dbg(&ptd->pdev->dev,
+			"CPU-PCH current temp [%dC] higher than the threshold temp [%dC], sleep %d times for %d ms duration\n",
+			pch_cur_temp, pch_thr_temp, pch_delay_cnt, delay_timeout);
+		msleep(delay_timeout);
+		/* Read the PCH current temperature for next cycle. */
+		pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP));
+	}
+
+	if (pch_cur_temp >= pch_thr_temp)
+		dev_warn(&ptd->pdev->dev,
+			"CPU-PCH is hot [%dC] after %d ms delay. S0ix might fail\n",
+			pch_cur_temp, pch_delay_cnt * delay_timeout);
+	else {
+		if (pch_delay_cnt)
+			dev_info(&ptd->pdev->dev,
+				"CPU-PCH is cool [%dC] after %d ms delay\n",
+				pch_cur_temp, pch_delay_cnt * delay_timeout);
+		else
+			dev_info(&ptd->pdev->dev,
+				"CPU-PCH is cool [%dC]\n",
+				pch_cur_temp);
+	}
+
+	return 0;
+}
+
+static int pch_wpt_resume(struct pch_thermal_device *ptd)
+{
+	u8 tsel;
+
+	if (ptd->bios_enabled)
+		return 0;
+
+	tsel = readb(ptd->hw_base + WPT_TSEL);
+
+	writeb(tsel | WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
+
+	return 0;
+}
+
+struct pch_dev_ops {
+	int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips);
+	int (*get_temp)(struct pch_thermal_device *ptd, int *temp);
+	int (*suspend)(struct pch_thermal_device *ptd);
+	int (*resume)(struct pch_thermal_device *ptd);
+};
+
+
+/* dev ops for Wildcat Point */
+static const struct pch_dev_ops pch_dev_ops_wpt = {
+	.hw_init = pch_wpt_init,
+	.get_temp = pch_wpt_get_temp,
+	.suspend = pch_wpt_suspend,
+	.resume = pch_wpt_resume,
+};
+
+static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
+{
+	struct pch_thermal_device *ptd = tzd->devdata;
+
+	return	ptd->ops->get_temp(ptd, temp);
+}
+
+static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
+			     enum thermal_trip_type *type)
+{
+	struct pch_thermal_device *ptd = tzd->devdata;
+
+	if (ptd->crt_trip_id == trip)
+		*type = THERMAL_TRIP_CRITICAL;
+	else if (ptd->hot_trip_id == trip)
+		*type = THERMAL_TRIP_HOT;
+	else if (ptd->psv_trip_id == trip)
+		*type = THERMAL_TRIP_PASSIVE;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp)
+{
+	struct pch_thermal_device *ptd = tzd->devdata;
+
+	if (ptd->crt_trip_id == trip)
+		*temp = ptd->crt_temp;
+	else if (ptd->hot_trip_id == trip)
+		*temp = ptd->hot_temp;
+	else if (ptd->psv_trip_id == trip)
+		*temp = ptd->psv_temp;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static void pch_critical(struct thermal_zone_device *tzd)
+{
+	dev_dbg(&tzd->device, "%s: critical temperature reached\n", tzd->type);
+}
+
+static struct thermal_zone_device_ops tzd_ops = {
+	.get_temp = pch_thermal_get_temp,
+	.get_trip_type = pch_get_trip_type,
+	.get_trip_temp = pch_get_trip_temp,
+	.critical = pch_critical,
+};
+
+enum board_ids {
+	board_hsw,
+	board_wpt,
+	board_skl,
+	board_cnl,
+	board_cml,
+	board_lwb,
+	board_wbg,
+};
+
+static const struct board_info {
+	const char *name;
+	const struct pch_dev_ops *ops;
+} board_info[] = {
+	[board_hsw] = {
+		.name = "pch_haswell",
+		.ops = &pch_dev_ops_wpt,
+	},
+	[board_wpt] = {
+		.name = "pch_wildcat_point",
+		.ops = &pch_dev_ops_wpt,
+	},
+	[board_skl] = {
+		.name = "pch_skylake",
+		.ops = &pch_dev_ops_wpt,
+	},
+	[board_cnl] = {
+		.name = "pch_cannonlake",
+		.ops = &pch_dev_ops_wpt,
+	},
+	[board_cml] = {
+		.name = "pch_cometlake",
+		.ops = &pch_dev_ops_wpt,
+	},
+	[board_lwb] = {
+		.name = "pch_lewisburg",
+		.ops = &pch_dev_ops_wpt,
+	},
+	[board_wbg] = {
+		.name = "pch_wellsburg",
+		.ops = &pch_dev_ops_wpt,
+	},
+};
+
+static int intel_pch_thermal_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *id)
+{
+	enum board_ids board_id = id->driver_data;
+	const struct board_info *bi = &board_info[board_id];
+	struct pch_thermal_device *ptd;
+	int err;
+	int nr_trips;
+
+	ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL);
+	if (!ptd)
+		return -ENOMEM;
+
+	ptd->ops = bi->ops;
+
+	pci_set_drvdata(pdev, ptd);
+	ptd->pdev = pdev;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable pci device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, driver_name);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request pci region\n");
+		goto error_disable;
+	}
+
+	ptd->hw_base = pci_ioremap_bar(pdev, 0);
+	if (!ptd->hw_base) {
+		err = -ENOMEM;
+		dev_err(&pdev->dev, "failed to map mem base\n");
+		goto error_release;
+	}
+
+	err = ptd->ops->hw_init(ptd, &nr_trips);
+	if (err)
+		goto error_cleanup;
+
+	ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd,
+						&tzd_ops, NULL, 0, 0);
+	if (IS_ERR(ptd->tzd)) {
+		dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
+			bi->name);
+		err = PTR_ERR(ptd->tzd);
+		goto error_cleanup;
+	}
+	err = thermal_zone_device_enable(ptd->tzd);
+	if (err)
+		goto err_unregister;
+
+	return 0;
+
+err_unregister:
+	thermal_zone_device_unregister(ptd->tzd);
+error_cleanup:
+	iounmap(ptd->hw_base);
+error_release:
+	pci_release_regions(pdev);
+error_disable:
+	pci_disable_device(pdev);
+	dev_err(&pdev->dev, "pci device failed to probe\n");
+	return err;
+}
+
+static void intel_pch_thermal_remove(struct pci_dev *pdev)
+{
+	struct pch_thermal_device *ptd = pci_get_drvdata(pdev);
+
+	thermal_zone_device_unregister(ptd->tzd);
+	iounmap(ptd->hw_base);
+	pci_set_drvdata(pdev, NULL);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static int intel_pch_thermal_suspend_noirq(struct device *device)
+{
+	struct pch_thermal_device *ptd = dev_get_drvdata(device);
+
+	return ptd->ops->suspend(ptd);
+}
+
+static int intel_pch_thermal_resume(struct device *device)
+{
+	struct pch_thermal_device *ptd = dev_get_drvdata(device);
+
+	return ptd->ops->resume(ptd);
+}
+
+static const struct pci_device_id intel_pch_thermal_id[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1),
+		.driver_data = board_hsw, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2),
+		.driver_data = board_hsw, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT),
+		.driver_data = board_wpt, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL),
+		.driver_data = board_skl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H),
+		.driver_data = board_skl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL),
+		.driver_data = board_cnl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H),
+		.driver_data = board_cnl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_LP),
+		.driver_data = board_cnl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
+		.driver_data = board_cml, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB),
+		.driver_data = board_lwb, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WBG),
+		.driver_data = board_wbg, },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
+
+static const struct dev_pm_ops intel_pch_pm_ops = {
+	.suspend_noirq = intel_pch_thermal_suspend_noirq,
+	.resume = intel_pch_thermal_resume,
+};
+
+static struct pci_driver intel_pch_thermal_driver = {
+	.name		= "intel_pch_thermal",
+	.id_table	= intel_pch_thermal_id,
+	.probe		= intel_pch_thermal_probe,
+	.remove		= intel_pch_thermal_remove,
+	.driver.pm	= &intel_pch_pm_ops,
+};
+
+module_pci_driver(intel_pch_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel PCH Thermal driver");
diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
new file mode 100644
index 000000000..2f4cbfdf2
--- /dev/null
+++ b/drivers/thermal/intel/intel_powerclamp.c
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * intel_powerclamp.c - package c-state idle injection
+ *
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * Authors:
+ *     Arjan van de Ven <arjan@linux.intel.com>
+ *     Jacob Pan <jacob.jun.pan@linux.intel.com>
+ *
+ *	TODO:
+ *           1. better handle wakeup from external interrupts, currently a fixed
+ *              compensation is added to clamping duration when excessive amount
+ *              of wakeups are observed during idle time. the reason is that in
+ *              case of external interrupts without need for ack, clamping down
+ *              cpu in non-irq context does not reduce irq. for majority of the
+ *              cases, clamping down cpu does help reduce irq as well, we should
+ *              be able to differentiate the two cases and give a quantitative
+ *              solution for the irqs that we can control. perhaps based on
+ *              get_cpu_iowait_time_us()
+ *
+ *	     2. synchronization with other hw blocks
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/cpu.h>
+#include <linux/thermal.h>
+#include <linux/slab.h>
+#include <linux/tick.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/sched/rt.h>
+#include <uapi/linux/sched/types.h>
+
+#include <asm/nmi.h>
+#include <asm/msr.h>
+#include <asm/mwait.h>
+#include <asm/cpu_device_id.h>
+#include <asm/hardirq.h>
+
+#define MAX_TARGET_RATIO (50U)
+/* For each undisturbed clamping period (no extra wake ups during idle time),
+ * we increment the confidence counter for the given target ratio.
+ * CONFIDENCE_OK defines the level where runtime calibration results are
+ * valid.
+ */
+#define CONFIDENCE_OK (3)
+/* Default idle injection duration, driver adjust sleep time to meet target
+ * idle ratio. Similar to frequency modulation.
+ */
+#define DEFAULT_DURATION_JIFFIES (6)
+
+static unsigned int target_mwait;
+static struct dentry *debug_dir;
+static bool poll_pkg_cstate_enable;
+
+/* user selected target */
+static unsigned int set_target_ratio;
+static unsigned int current_ratio;
+static bool should_skip;
+
+static unsigned int control_cpu; /* The cpu assigned to collect stat and update
+				  * control parameters. default to BSP but BSP
+				  * can be offlined.
+				  */
+static bool clamping;
+
+struct powerclamp_worker_data {
+	struct kthread_worker *worker;
+	struct kthread_work balancing_work;
+	struct kthread_delayed_work idle_injection_work;
+	unsigned int cpu;
+	unsigned int count;
+	unsigned int guard;
+	unsigned int window_size_now;
+	unsigned int target_ratio;
+	unsigned int duration_jiffies;
+	bool clamping;
+};
+
+static struct powerclamp_worker_data __percpu *worker_data;
+static struct thermal_cooling_device *cooling_dev;
+static unsigned long *cpu_clamping_mask;  /* bit map for tracking per cpu
+					   * clamping kthread worker
+					   */
+
+static unsigned int duration;
+static unsigned int pkg_cstate_ratio_cur;
+static unsigned int window_size;
+
+static int duration_set(const char *arg, const struct kernel_param *kp)
+{
+	int ret = 0;
+	unsigned long new_duration;
+
+	ret = kstrtoul(arg, 10, &new_duration);
+	if (ret)
+		goto exit;
+	if (new_duration > 25 || new_duration < 6) {
+		pr_err("Out of recommended range %lu, between 6-25ms\n",
+			new_duration);
+		ret = -EINVAL;
+	}
+
+	duration = clamp(new_duration, 6ul, 25ul);
+	smp_mb();
+
+exit:
+
+	return ret;
+}
+
+static const struct kernel_param_ops duration_ops = {
+	.set = duration_set,
+	.get = param_get_int,
+};
+
+
+module_param_cb(duration, &duration_ops, &duration, 0644);
+MODULE_PARM_DESC(duration, "forced idle time for each attempt in msec.");
+
+struct powerclamp_calibration_data {
+	unsigned long confidence;  /* used for calibration, basically a counter
+				    * gets incremented each time a clamping
+				    * period is completed without extra wakeups
+				    * once that counter is reached given level,
+				    * compensation is deemed usable.
+				    */
+	unsigned long steady_comp; /* steady state compensation used when
+				    * no extra wakeups occurred.
+				    */
+	unsigned long dynamic_comp; /* compensate excessive wakeup from idle
+				     * mostly from external interrupts.
+				     */
+};
+
+static struct powerclamp_calibration_data cal_data[MAX_TARGET_RATIO];
+
+static int window_size_set(const char *arg, const struct kernel_param *kp)
+{
+	int ret = 0;
+	unsigned long new_window_size;
+
+	ret = kstrtoul(arg, 10, &new_window_size);
+	if (ret)
+		goto exit_win;
+	if (new_window_size > 10 || new_window_size < 2) {
+		pr_err("Out of recommended window size %lu, between 2-10\n",
+			new_window_size);
+		ret = -EINVAL;
+	}
+
+	window_size = clamp(new_window_size, 2ul, 10ul);
+	smp_mb();
+
+exit_win:
+
+	return ret;
+}
+
+static const struct kernel_param_ops window_size_ops = {
+	.set = window_size_set,
+	.get = param_get_int,
+};
+
+module_param_cb(window_size, &window_size_ops, &window_size, 0644);
+MODULE_PARM_DESC(window_size, "sliding window in number of clamping cycles\n"
+	"\tpowerclamp controls idle ratio within this window. larger\n"
+	"\twindow size results in slower response time but more smooth\n"
+	"\tclamping results. default to 2.");
+
+static void find_target_mwait(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+	unsigned int highest_cstate = 0;
+	unsigned int highest_subcstate = 0;
+	int i;
+
+	if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
+		return;
+
+	cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+	if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+	    !(ecx & CPUID5_ECX_INTERRUPT_BREAK))
+		return;
+
+	edx >>= MWAIT_SUBSTATE_SIZE;
+	for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
+		if (edx & MWAIT_SUBSTATE_MASK) {
+			highest_cstate = i;
+			highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
+		}
+	}
+	target_mwait = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
+		(highest_subcstate - 1);
+
+}
+
+struct pkg_cstate_info {
+	bool skip;
+	int msr_index;
+	int cstate_id;
+};
+
+#define PKG_CSTATE_INIT(id) {				\
+		.msr_index = MSR_PKG_C##id##_RESIDENCY, \
+		.cstate_id = id				\
+			}
+
+static struct pkg_cstate_info pkg_cstates[] = {
+	PKG_CSTATE_INIT(2),
+	PKG_CSTATE_INIT(3),
+	PKG_CSTATE_INIT(6),
+	PKG_CSTATE_INIT(7),
+	PKG_CSTATE_INIT(8),
+	PKG_CSTATE_INIT(9),
+	PKG_CSTATE_INIT(10),
+	{NULL},
+};
+
+static bool has_pkg_state_counter(void)
+{
+	u64 val;
+	struct pkg_cstate_info *info = pkg_cstates;
+
+	/* check if any one of the counter msrs exists */
+	while (info->msr_index) {
+		if (!rdmsrl_safe(info->msr_index, &val))
+			return true;
+		info++;
+	}
+
+	return false;
+}
+
+static u64 pkg_state_counter(void)
+{
+	u64 val;
+	u64 count = 0;
+	struct pkg_cstate_info *info = pkg_cstates;
+
+	while (info->msr_index) {
+		if (!info->skip) {
+			if (!rdmsrl_safe(info->msr_index, &val))
+				count += val;
+			else
+				info->skip = true;
+		}
+		info++;
+	}
+
+	return count;
+}
+
+static unsigned int get_compensation(int ratio)
+{
+	unsigned int comp = 0;
+
+	if (!poll_pkg_cstate_enable)
+		return 0;
+
+	/* we only use compensation if all adjacent ones are good */
+	if (ratio == 1 &&
+		cal_data[ratio].confidence >= CONFIDENCE_OK &&
+		cal_data[ratio + 1].confidence >= CONFIDENCE_OK &&
+		cal_data[ratio + 2].confidence >= CONFIDENCE_OK) {
+		comp = (cal_data[ratio].steady_comp +
+			cal_data[ratio + 1].steady_comp +
+			cal_data[ratio + 2].steady_comp) / 3;
+	} else if (ratio == MAX_TARGET_RATIO - 1 &&
+		cal_data[ratio].confidence >= CONFIDENCE_OK &&
+		cal_data[ratio - 1].confidence >= CONFIDENCE_OK &&
+		cal_data[ratio - 2].confidence >= CONFIDENCE_OK) {
+		comp = (cal_data[ratio].steady_comp +
+			cal_data[ratio - 1].steady_comp +
+			cal_data[ratio - 2].steady_comp) / 3;
+	} else if (cal_data[ratio].confidence >= CONFIDENCE_OK &&
+		cal_data[ratio - 1].confidence >= CONFIDENCE_OK &&
+		cal_data[ratio + 1].confidence >= CONFIDENCE_OK) {
+		comp = (cal_data[ratio].steady_comp +
+			cal_data[ratio - 1].steady_comp +
+			cal_data[ratio + 1].steady_comp) / 3;
+	}
+
+	/* do not exceed limit */
+	if (comp + ratio >= MAX_TARGET_RATIO)
+		comp = MAX_TARGET_RATIO - ratio - 1;
+
+	return comp;
+}
+
+static void adjust_compensation(int target_ratio, unsigned int win)
+{
+	int delta;
+	struct powerclamp_calibration_data *d = &cal_data[target_ratio];
+
+	/*
+	 * adjust compensations if confidence level has not been reached.
+	 */
+	if (d->confidence >= CONFIDENCE_OK)
+		return;
+
+	delta = set_target_ratio - current_ratio;
+	/* filter out bad data */
+	if (delta >= 0 && delta <= (1+target_ratio/10)) {
+		if (d->steady_comp)
+			d->steady_comp =
+				roundup(delta+d->steady_comp, 2)/2;
+		else
+			d->steady_comp = delta;
+		d->confidence++;
+	}
+}
+
+static bool powerclamp_adjust_controls(unsigned int target_ratio,
+				unsigned int guard, unsigned int win)
+{
+	static u64 msr_last, tsc_last;
+	u64 msr_now, tsc_now;
+	u64 val64;
+
+	/* check result for the last window */
+	msr_now = pkg_state_counter();
+	tsc_now = rdtsc();
+
+	/* calculate pkg cstate vs tsc ratio */
+	if (!msr_last || !tsc_last)
+		current_ratio = 1;
+	else if (tsc_now-tsc_last) {
+		val64 = 100*(msr_now-msr_last);
+		do_div(val64, (tsc_now-tsc_last));
+		current_ratio = val64;
+	}
+
+	/* update record */
+	msr_last = msr_now;
+	tsc_last = tsc_now;
+
+	adjust_compensation(target_ratio, win);
+
+	/* if we are above target+guard, skip */
+	return set_target_ratio + guard <= current_ratio;
+}
+
+static void clamp_balancing_func(struct kthread_work *work)
+{
+	struct powerclamp_worker_data *w_data;
+	int sleeptime;
+	unsigned long target_jiffies;
+	unsigned int compensated_ratio;
+	int interval; /* jiffies to sleep for each attempt */
+
+	w_data = container_of(work, struct powerclamp_worker_data,
+			      balancing_work);
+
+	/*
+	 * make sure user selected ratio does not take effect until
+	 * the next round. adjust target_ratio if user has changed
+	 * target such that we can converge quickly.
+	 */
+	w_data->target_ratio = READ_ONCE(set_target_ratio);
+	w_data->guard = 1 + w_data->target_ratio / 20;
+	w_data->window_size_now = window_size;
+	w_data->duration_jiffies = msecs_to_jiffies(duration);
+	w_data->count++;
+
+	/*
+	 * systems may have different ability to enter package level
+	 * c-states, thus we need to compensate the injected idle ratio
+	 * to achieve the actual target reported by the HW.
+	 */
+	compensated_ratio = w_data->target_ratio +
+		get_compensation(w_data->target_ratio);
+	if (compensated_ratio <= 0)
+		compensated_ratio = 1;
+	interval = w_data->duration_jiffies * 100 / compensated_ratio;
+
+	/* align idle time */
+	target_jiffies = roundup(jiffies, interval);
+	sleeptime = target_jiffies - jiffies;
+	if (sleeptime <= 0)
+		sleeptime = 1;
+
+	if (clamping && w_data->clamping && cpu_online(w_data->cpu))
+		kthread_queue_delayed_work(w_data->worker,
+					   &w_data->idle_injection_work,
+					   sleeptime);
+}
+
+static void clamp_idle_injection_func(struct kthread_work *work)
+{
+	struct powerclamp_worker_data *w_data;
+
+	w_data = container_of(work, struct powerclamp_worker_data,
+			      idle_injection_work.work);
+
+	/*
+	 * only elected controlling cpu can collect stats and update
+	 * control parameters.
+	 */
+	if (w_data->cpu == control_cpu &&
+	    !(w_data->count % w_data->window_size_now)) {
+		should_skip =
+			powerclamp_adjust_controls(w_data->target_ratio,
+						   w_data->guard,
+						   w_data->window_size_now);
+		smp_mb();
+	}
+
+	if (should_skip)
+		goto balance;
+
+	play_idle(jiffies_to_usecs(w_data->duration_jiffies));
+
+balance:
+	if (clamping && w_data->clamping && cpu_online(w_data->cpu))
+		kthread_queue_work(w_data->worker, &w_data->balancing_work);
+}
+
+/*
+ * 1 HZ polling while clamping is active, useful for userspace
+ * to monitor actual idle ratio.
+ */
+static void poll_pkg_cstate(struct work_struct *dummy);
+static DECLARE_DELAYED_WORK(poll_pkg_cstate_work, poll_pkg_cstate);
+static void poll_pkg_cstate(struct work_struct *dummy)
+{
+	static u64 msr_last;
+	static u64 tsc_last;
+
+	u64 msr_now;
+	u64 tsc_now;
+	u64 val64;
+
+	msr_now = pkg_state_counter();
+	tsc_now = rdtsc();
+
+	/* calculate pkg cstate vs tsc ratio */
+	if (!msr_last || !tsc_last)
+		pkg_cstate_ratio_cur = 1;
+	else {
+		if (tsc_now - tsc_last) {
+			val64 = 100 * (msr_now - msr_last);
+			do_div(val64, (tsc_now - tsc_last));
+			pkg_cstate_ratio_cur = val64;
+		}
+	}
+
+	/* update record */
+	msr_last = msr_now;
+	tsc_last = tsc_now;
+
+	if (true == clamping)
+		schedule_delayed_work(&poll_pkg_cstate_work, HZ);
+}
+
+static void start_power_clamp_worker(unsigned long cpu)
+{
+	struct powerclamp_worker_data *w_data = per_cpu_ptr(worker_data, cpu);
+	struct kthread_worker *worker;
+
+	worker = kthread_create_worker_on_cpu(cpu, 0, "kidle_inj/%ld", cpu);
+	if (IS_ERR(worker))
+		return;
+
+	w_data->worker = worker;
+	w_data->count = 0;
+	w_data->cpu = cpu;
+	w_data->clamping = true;
+	set_bit(cpu, cpu_clamping_mask);
+	sched_set_fifo(worker->task);
+	kthread_init_work(&w_data->balancing_work, clamp_balancing_func);
+	kthread_init_delayed_work(&w_data->idle_injection_work,
+				  clamp_idle_injection_func);
+	kthread_queue_work(w_data->worker, &w_data->balancing_work);
+}
+
+static void stop_power_clamp_worker(unsigned long cpu)
+{
+	struct powerclamp_worker_data *w_data = per_cpu_ptr(worker_data, cpu);
+
+	if (!w_data->worker)
+		return;
+
+	w_data->clamping = false;
+	/*
+	 * Make sure that all works that get queued after this point see
+	 * the clamping disabled. The counter part is not needed because
+	 * there is an implicit memory barrier when the queued work
+	 * is proceed.
+	 */
+	smp_wmb();
+	kthread_cancel_work_sync(&w_data->balancing_work);
+	kthread_cancel_delayed_work_sync(&w_data->idle_injection_work);
+	/*
+	 * The balancing work still might be queued here because
+	 * the handling of the "clapming" variable, cancel, and queue
+	 * operations are not synchronized via a lock. But it is not
+	 * a big deal. The balancing work is fast and destroy kthread
+	 * will wait for it.
+	 */
+	clear_bit(w_data->cpu, cpu_clamping_mask);
+	kthread_destroy_worker(w_data->worker);
+
+	w_data->worker = NULL;
+}
+
+static int start_power_clamp(void)
+{
+	unsigned long cpu;
+
+	set_target_ratio = clamp(set_target_ratio, 0U, MAX_TARGET_RATIO - 1);
+	/* prevent cpu hotplug */
+	cpus_read_lock();
+
+	/* prefer BSP */
+	control_cpu = cpumask_first(cpu_online_mask);
+
+	clamping = true;
+	if (poll_pkg_cstate_enable)
+		schedule_delayed_work(&poll_pkg_cstate_work, 0);
+
+	/* start one kthread worker per online cpu */
+	for_each_online_cpu(cpu) {
+		start_power_clamp_worker(cpu);
+	}
+	cpus_read_unlock();
+
+	return 0;
+}
+
+static void end_power_clamp(void)
+{
+	int i;
+
+	/*
+	 * Block requeuing in all the kthread workers. They will flush and
+	 * stop faster.
+	 */
+	clamping = false;
+	for_each_set_bit(i, cpu_clamping_mask, num_possible_cpus()) {
+		pr_debug("clamping worker for cpu %d alive, destroy\n", i);
+		stop_power_clamp_worker(i);
+	}
+}
+
+static int powerclamp_cpu_online(unsigned int cpu)
+{
+	if (clamping == false)
+		return 0;
+	start_power_clamp_worker(cpu);
+	/* prefer BSP as controlling CPU */
+	if (cpu == 0) {
+		control_cpu = 0;
+		smp_mb();
+	}
+	return 0;
+}
+
+static int powerclamp_cpu_predown(unsigned int cpu)
+{
+	if (clamping == false)
+		return 0;
+
+	stop_power_clamp_worker(cpu);
+	if (cpu != control_cpu)
+		return 0;
+
+	control_cpu = cpumask_first(cpu_online_mask);
+	if (control_cpu == cpu)
+		control_cpu = cpumask_next(cpu, cpu_online_mask);
+	smp_mb();
+	return 0;
+}
+
+static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	*state = MAX_TARGET_RATIO;
+
+	return 0;
+}
+
+static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	if (clamping) {
+		if (poll_pkg_cstate_enable)
+			*state = pkg_cstate_ratio_cur;
+		else
+			*state = set_target_ratio;
+	} else {
+		/* to save power, do not poll idle ratio while not clamping */
+		*state = -1; /* indicates invalid state */
+	}
+
+	return 0;
+}
+
+static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long new_target_ratio)
+{
+	int ret = 0;
+
+	new_target_ratio = clamp(new_target_ratio, 0UL,
+				(unsigned long) (MAX_TARGET_RATIO-1));
+	if (set_target_ratio == 0 && new_target_ratio > 0) {
+		pr_info("Start idle injection to reduce power\n");
+		set_target_ratio = new_target_ratio;
+		ret = start_power_clamp();
+		goto exit_set;
+	} else	if (set_target_ratio > 0 && new_target_ratio == 0) {
+		pr_info("Stop forced idle injection\n");
+		end_power_clamp();
+		set_target_ratio = 0;
+	} else	/* adjust currently running */ {
+		set_target_ratio = new_target_ratio;
+		/* make new set_target_ratio visible to other cpus */
+		smp_mb();
+	}
+
+exit_set:
+	return ret;
+}
+
+/* bind to generic thermal layer as cooling device*/
+static const struct thermal_cooling_device_ops powerclamp_cooling_ops = {
+	.get_max_state = powerclamp_get_max_state,
+	.get_cur_state = powerclamp_get_cur_state,
+	.set_cur_state = powerclamp_set_cur_state,
+};
+
+static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = {
+	X86_MATCH_VENDOR_FEATURE(INTEL, X86_FEATURE_MWAIT, NULL),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
+
+static int __init powerclamp_probe(void)
+{
+
+	if (!x86_match_cpu(intel_powerclamp_ids)) {
+		pr_err("CPU does not support MWAIT\n");
+		return -ENODEV;
+	}
+
+	/* The goal for idle time alignment is to achieve package cstate. */
+	if (!has_pkg_state_counter()) {
+		pr_info("No package C-state available\n");
+		return -ENODEV;
+	}
+
+	/* find the deepest mwait value */
+	find_target_mwait();
+
+	return 0;
+}
+
+static int powerclamp_debug_show(struct seq_file *m, void *unused)
+{
+	int i = 0;
+
+	seq_printf(m, "controlling cpu: %d\n", control_cpu);
+	seq_printf(m, "pct confidence steady dynamic (compensation)\n");
+	for (i = 0; i < MAX_TARGET_RATIO; i++) {
+		seq_printf(m, "%d\t%lu\t%lu\t%lu\n",
+			i,
+			cal_data[i].confidence,
+			cal_data[i].steady_comp,
+			cal_data[i].dynamic_comp);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(powerclamp_debug);
+
+static inline void powerclamp_create_debug_files(void)
+{
+	debug_dir = debugfs_create_dir("intel_powerclamp", NULL);
+
+	debugfs_create_file("powerclamp_calib", S_IRUGO, debug_dir, cal_data,
+			    &powerclamp_debug_fops);
+}
+
+static enum cpuhp_state hp_state;
+
+static int __init powerclamp_init(void)
+{
+	int retval;
+
+	cpu_clamping_mask = bitmap_zalloc(num_possible_cpus(), GFP_KERNEL);
+	if (!cpu_clamping_mask)
+		return -ENOMEM;
+
+	/* probe cpu features and ids here */
+	retval = powerclamp_probe();
+	if (retval)
+		goto exit_free;
+
+	/* set default limit, maybe adjusted during runtime based on feedback */
+	window_size = 2;
+	retval = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+					   "thermal/intel_powerclamp:online",
+					   powerclamp_cpu_online,
+					   powerclamp_cpu_predown);
+	if (retval < 0)
+		goto exit_free;
+
+	hp_state = retval;
+
+	worker_data = alloc_percpu(struct powerclamp_worker_data);
+	if (!worker_data) {
+		retval = -ENOMEM;
+		goto exit_unregister;
+	}
+
+	if (topology_max_packages() == 1 && topology_max_die_per_package() == 1)
+		poll_pkg_cstate_enable = true;
+
+	cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL,
+						&powerclamp_cooling_ops);
+	if (IS_ERR(cooling_dev)) {
+		retval = -ENODEV;
+		goto exit_free_thread;
+	}
+
+	if (!duration)
+		duration = jiffies_to_msecs(DEFAULT_DURATION_JIFFIES);
+
+	powerclamp_create_debug_files();
+
+	return 0;
+
+exit_free_thread:
+	free_percpu(worker_data);
+exit_unregister:
+	cpuhp_remove_state_nocalls(hp_state);
+exit_free:
+	bitmap_free(cpu_clamping_mask);
+	return retval;
+}
+module_init(powerclamp_init);
+
+static void __exit powerclamp_exit(void)
+{
+	end_power_clamp();
+	cpuhp_remove_state_nocalls(hp_state);
+	free_percpu(worker_data);
+	thermal_cooling_device_unregister(cooling_dev);
+	bitmap_free(cpu_clamping_mask);
+
+	cancel_delayed_work_sync(&poll_pkg_cstate_work);
+	debugfs_remove_recursive(debug_dir);
+}
+module_exit(powerclamp_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
+MODULE_DESCRIPTION("Package Level C-state Idle Injection for Intel CPUs");
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
new file mode 100644
index 000000000..b43fbd5ea
--- /dev/null
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
@@ -0,0 +1,438 @@
+/*
+ * intel_quark_dts_thermal.c
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * Contact Information:
+ *  Ong Boon Leong <boon.leong.ong@intel.com>
+ *  Intel Malaysia, Penang
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Quark DTS thermal driver is implemented by referencing
+ * intel_soc_dts_thermal.c.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/thermal.h>
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+
+/* DTS reset is programmed via QRK_MBI_UNIT_SOC */
+#define QRK_DTS_REG_OFFSET_RESET	0x34
+#define QRK_DTS_RESET_BIT		BIT(0)
+
+/* DTS enable is programmed via QRK_MBI_UNIT_RMU */
+#define QRK_DTS_REG_OFFSET_ENABLE	0xB0
+#define QRK_DTS_ENABLE_BIT		BIT(15)
+
+/* Temperature Register is read via QRK_MBI_UNIT_RMU */
+#define QRK_DTS_REG_OFFSET_TEMP		0xB1
+#define QRK_DTS_MASK_TEMP		0xFF
+#define QRK_DTS_OFFSET_TEMP		0
+#define QRK_DTS_OFFSET_REL_TEMP		16
+#define QRK_DTS_TEMP_BASE		50
+
+/* Programmable Trip Point Register is configured via QRK_MBI_UNIT_RMU */
+#define QRK_DTS_REG_OFFSET_PTPS		0xB2
+#define QRK_DTS_MASK_TP_THRES		0xFF
+#define QRK_DTS_SHIFT_TP		8
+#define QRK_DTS_ID_TP_CRITICAL		0
+#define QRK_DTS_SAFE_TP_THRES		105
+
+/* Thermal Sensor Register Lock */
+#define QRK_DTS_REG_OFFSET_LOCK		0x71
+#define QRK_DTS_LOCK_BIT		BIT(5)
+
+/* Quark DTS has 2 trip points: hot & catastrophic */
+#define QRK_MAX_DTS_TRIPS	2
+/* If DTS not locked, all trip points are configurable */
+#define QRK_DTS_WR_MASK_SET	0x3
+/* If DTS locked, all trip points are not configurable */
+#define QRK_DTS_WR_MASK_CLR	0
+
+#define DEFAULT_POLL_DELAY	2000
+
+struct soc_sensor_entry {
+	bool locked;
+	u32 store_ptps;
+	u32 store_dts_enable;
+	struct thermal_zone_device *tzone;
+};
+
+static struct soc_sensor_entry *soc_dts;
+
+static int polling_delay = DEFAULT_POLL_DELAY;
+module_param(polling_delay, int, 0644);
+MODULE_PARM_DESC(polling_delay,
+	"Polling interval for checking trip points (in milliseconds)");
+
+static DEFINE_MUTEX(dts_update_mutex);
+
+static int soc_dts_enable(struct thermal_zone_device *tzd)
+{
+	u32 out;
+	struct soc_sensor_entry *aux_entry = tzd->devdata;
+	int ret;
+
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_ENABLE, &out);
+	if (ret)
+		return ret;
+
+	if (out & QRK_DTS_ENABLE_BIT)
+		return 0;
+
+	if (!aux_entry->locked) {
+		out |= QRK_DTS_ENABLE_BIT;
+		ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				     QRK_DTS_REG_OFFSET_ENABLE, out);
+		if (ret)
+			return ret;
+	} else {
+		pr_info("DTS is locked. Cannot enable DTS\n");
+		ret = -EPERM;
+	}
+
+	return ret;
+}
+
+static int soc_dts_disable(struct thermal_zone_device *tzd)
+{
+	u32 out;
+	struct soc_sensor_entry *aux_entry = tzd->devdata;
+	int ret;
+
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_ENABLE, &out);
+	if (ret)
+		return ret;
+
+	if (!(out & QRK_DTS_ENABLE_BIT))
+		return 0;
+
+	if (!aux_entry->locked) {
+		out &= ~QRK_DTS_ENABLE_BIT;
+		ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				     QRK_DTS_REG_OFFSET_ENABLE, out);
+
+		if (ret)
+			return ret;
+	} else {
+		pr_info("DTS is locked. Cannot disable DTS\n");
+		ret = -EPERM;
+	}
+
+	return ret;
+}
+
+static int _get_trip_temp(int trip, int *temp)
+{
+	int status;
+	u32 out;
+
+	mutex_lock(&dts_update_mutex);
+	status = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			       QRK_DTS_REG_OFFSET_PTPS, &out);
+	mutex_unlock(&dts_update_mutex);
+
+	if (status)
+		return status;
+
+	/*
+	 * Thermal Sensor Programmable Trip Point Register has 8-bit
+	 * fields for critical (catastrophic) and hot set trip point
+	 * thresholds. The threshold value is always offset by its
+	 * temperature base (50 degree Celsius).
+	 */
+	*temp = (out >> (trip * QRK_DTS_SHIFT_TP)) & QRK_DTS_MASK_TP_THRES;
+	*temp -= QRK_DTS_TEMP_BASE;
+
+	return 0;
+}
+
+static inline int sys_get_trip_temp(struct thermal_zone_device *tzd,
+				int trip, int *temp)
+{
+	return _get_trip_temp(trip, temp);
+}
+
+static inline int sys_get_crit_temp(struct thermal_zone_device *tzd, int *temp)
+{
+	return _get_trip_temp(QRK_DTS_ID_TP_CRITICAL, temp);
+}
+
+static int update_trip_temp(struct soc_sensor_entry *aux_entry,
+				int trip, int temp)
+{
+	u32 out;
+	u32 temp_out;
+	u32 store_ptps;
+	int ret;
+
+	mutex_lock(&dts_update_mutex);
+	if (aux_entry->locked) {
+		ret = -EPERM;
+		goto failed;
+	}
+
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_PTPS, &store_ptps);
+	if (ret)
+		goto failed;
+
+	/*
+	 * Protection against unsafe trip point thresdhold value.
+	 * As Quark X1000 data-sheet does not provide any recommendation
+	 * regarding the safe trip point threshold value to use, we choose
+	 * the safe value according to the threshold value set by UEFI BIOS.
+	 */
+	if (temp > QRK_DTS_SAFE_TP_THRES)
+		temp = QRK_DTS_SAFE_TP_THRES;
+
+	/*
+	 * Thermal Sensor Programmable Trip Point Register has 8-bit
+	 * fields for critical (catastrophic) and hot set trip point
+	 * thresholds. The threshold value is always offset by its
+	 * temperature base (50 degree Celsius).
+	 */
+	temp_out = temp + QRK_DTS_TEMP_BASE;
+	out = (store_ptps & ~(QRK_DTS_MASK_TP_THRES <<
+		(trip * QRK_DTS_SHIFT_TP)));
+	out |= (temp_out & QRK_DTS_MASK_TP_THRES) <<
+		(trip * QRK_DTS_SHIFT_TP);
+
+	ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+			     QRK_DTS_REG_OFFSET_PTPS, out);
+
+failed:
+	mutex_unlock(&dts_update_mutex);
+	return ret;
+}
+
+static inline int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
+				int temp)
+{
+	return update_trip_temp(tzd->devdata, trip, temp);
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *thermal,
+		int trip, enum thermal_trip_type *type)
+{
+	if (trip)
+		*type = THERMAL_TRIP_HOT;
+	else
+		*type = THERMAL_TRIP_CRITICAL;
+
+	return 0;
+}
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzd,
+				int *temp)
+{
+	u32 out;
+	int ret;
+
+	mutex_lock(&dts_update_mutex);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_TEMP, &out);
+	mutex_unlock(&dts_update_mutex);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Thermal Sensor Temperature Register has 8-bit field
+	 * for temperature value (offset by temperature base
+	 * 50 degree Celsius).
+	 */
+	out = (out >> QRK_DTS_OFFSET_TEMP) & QRK_DTS_MASK_TEMP;
+	*temp = out - QRK_DTS_TEMP_BASE;
+
+	return 0;
+}
+
+static int sys_change_mode(struct thermal_zone_device *tzd,
+			   enum thermal_device_mode mode)
+{
+	int ret;
+
+	mutex_lock(&dts_update_mutex);
+	if (mode == THERMAL_DEVICE_ENABLED)
+		ret = soc_dts_enable(tzd);
+	else
+		ret = soc_dts_disable(tzd);
+	mutex_unlock(&dts_update_mutex);
+
+	return ret;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+	.get_temp = sys_get_curr_temp,
+	.get_trip_temp = sys_get_trip_temp,
+	.get_trip_type = sys_get_trip_type,
+	.set_trip_temp = sys_set_trip_temp,
+	.get_crit_temp = sys_get_crit_temp,
+	.change_mode = sys_change_mode,
+};
+
+static void free_soc_dts(struct soc_sensor_entry *aux_entry)
+{
+	if (aux_entry) {
+		if (!aux_entry->locked) {
+			mutex_lock(&dts_update_mutex);
+			iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				       QRK_DTS_REG_OFFSET_ENABLE,
+				       aux_entry->store_dts_enable);
+
+			iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				       QRK_DTS_REG_OFFSET_PTPS,
+				       aux_entry->store_ptps);
+			mutex_unlock(&dts_update_mutex);
+		}
+		thermal_zone_device_unregister(aux_entry->tzone);
+		kfree(aux_entry);
+	}
+}
+
+static struct soc_sensor_entry *alloc_soc_dts(void)
+{
+	struct soc_sensor_entry *aux_entry;
+	int err;
+	u32 out;
+	int wr_mask;
+
+	aux_entry = kzalloc(sizeof(*aux_entry), GFP_KERNEL);
+	if (!aux_entry) {
+		err = -ENOMEM;
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* Check if DTS register is locked */
+	err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_LOCK, &out);
+	if (err)
+		goto err_ret;
+
+	if (out & QRK_DTS_LOCK_BIT) {
+		aux_entry->locked = true;
+		wr_mask = QRK_DTS_WR_MASK_CLR;
+	} else {
+		aux_entry->locked = false;
+		wr_mask = QRK_DTS_WR_MASK_SET;
+	}
+
+	/* Store DTS default state if DTS registers are not locked */
+	if (!aux_entry->locked) {
+		/* Store DTS default enable for restore on exit */
+		err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+				    QRK_DTS_REG_OFFSET_ENABLE,
+				    &aux_entry->store_dts_enable);
+		if (err)
+			goto err_ret;
+
+		/* Store DTS default PTPS register for restore on exit */
+		err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+				    QRK_DTS_REG_OFFSET_PTPS,
+				    &aux_entry->store_ptps);
+		if (err)
+			goto err_ret;
+	}
+
+	aux_entry->tzone = thermal_zone_device_register("quark_dts",
+			QRK_MAX_DTS_TRIPS,
+			wr_mask,
+			aux_entry, &tzone_ops, NULL, 0, polling_delay);
+	if (IS_ERR(aux_entry->tzone)) {
+		err = PTR_ERR(aux_entry->tzone);
+		goto err_ret;
+	}
+
+	err = thermal_zone_device_enable(aux_entry->tzone);
+	if (err)
+		goto err_aux_status;
+
+	return aux_entry;
+
+err_aux_status:
+	thermal_zone_device_unregister(aux_entry->tzone);
+err_ret:
+	kfree(aux_entry);
+	return ERR_PTR(err);
+}
+
+static const struct x86_cpu_id qrk_thermal_ids[] __initconst  = {
+	X86_MATCH_VENDOR_FAM_MODEL(INTEL, 5, INTEL_FAM5_QUARK_X1000, NULL),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, qrk_thermal_ids);
+
+static int __init intel_quark_thermal_init(void)
+{
+	if (!x86_match_cpu(qrk_thermal_ids) || !iosf_mbi_available())
+		return -ENODEV;
+
+	soc_dts = alloc_soc_dts();
+	if (IS_ERR(soc_dts))
+		return PTR_ERR(soc_dts);
+
+	return 0;
+}
+
+static void __exit intel_quark_thermal_exit(void)
+{
+	free_soc_dts(soc_dts);
+}
+
+module_init(intel_quark_thermal_init)
+module_exit(intel_quark_thermal_exit)
+
+MODULE_DESCRIPTION("Intel Quark DTS Thermal Driver");
+MODULE_AUTHOR("Ong Boon Leong <boon.leong.ong@intel.com>");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
new file mode 100644
index 000000000..8651ff1ab
--- /dev/null
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * intel_soc_dts_iosf.c
+ * Copyright (c) 2015, Intel Corporation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <asm/iosf_mbi.h>
+#include "intel_soc_dts_iosf.h"
+
+#define SOC_DTS_OFFSET_ENABLE		0xB0
+#define SOC_DTS_OFFSET_TEMP		0xB1
+
+#define SOC_DTS_OFFSET_PTPS		0xB2
+#define SOC_DTS_OFFSET_PTTS		0xB3
+#define SOC_DTS_OFFSET_PTTSS		0xB4
+#define SOC_DTS_OFFSET_PTMC		0x80
+#define SOC_DTS_TE_AUX0			0xB5
+#define SOC_DTS_TE_AUX1			0xB6
+
+#define SOC_DTS_AUX0_ENABLE_BIT		BIT(0)
+#define SOC_DTS_AUX1_ENABLE_BIT		BIT(1)
+#define SOC_DTS_CPU_MODULE0_ENABLE_BIT	BIT(16)
+#define SOC_DTS_CPU_MODULE1_ENABLE_BIT	BIT(17)
+#define SOC_DTS_TE_SCI_ENABLE		BIT(9)
+#define SOC_DTS_TE_SMI_ENABLE		BIT(10)
+#define SOC_DTS_TE_MSI_ENABLE		BIT(11)
+#define SOC_DTS_TE_APICA_ENABLE		BIT(14)
+#define SOC_DTS_PTMC_APIC_DEASSERT_BIT	BIT(4)
+
+/* DTS encoding for TJ MAX temperature */
+#define SOC_DTS_TJMAX_ENCODING		0x7F
+
+/* Only 2 out of 4 is allowed for OSPM */
+#define SOC_MAX_DTS_TRIPS		2
+
+/* Mask for two trips in status bits */
+#define SOC_DTS_TRIP_MASK		0x03
+
+/* DTS0 and DTS 1 */
+#define SOC_MAX_DTS_SENSORS		2
+
+static int get_tj_max(u32 *tj_max)
+{
+	u32 eax, edx;
+	u32 val;
+	int err;
+
+	err = rdmsr_safe(MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
+	if (err)
+		goto err_ret;
+	else {
+		val = (eax >> 16) & 0xff;
+		if (val)
+			*tj_max = val * 1000;
+		else {
+			err = -EINVAL;
+			goto err_ret;
+		}
+	}
+
+	return 0;
+err_ret:
+	*tj_max = 0;
+
+	return err;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzd, int trip,
+			     int *temp)
+{
+	int status;
+	u32 out;
+	struct intel_soc_dts_sensor_entry *dts;
+	struct intel_soc_dts_sensors *sensors;
+
+	dts = tzd->devdata;
+	sensors = dts->sensors;
+	mutex_lock(&sensors->dts_update_lock);
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_OFFSET_PTPS, &out);
+	mutex_unlock(&sensors->dts_update_lock);
+	if (status)
+		return status;
+
+	out = (out >> (trip * 8)) & SOC_DTS_TJMAX_ENCODING;
+	if (!out)
+		*temp = 0;
+	else
+		*temp = sensors->tj_max - out * 1000;
+
+	return 0;
+}
+
+static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
+			    int thres_index, int temp,
+			    enum thermal_trip_type trip_type)
+{
+	int status;
+	u32 temp_out;
+	u32 out;
+	unsigned long update_ptps;
+	u32 store_ptps;
+	u32 store_ptmc;
+	u32 store_te_out;
+	u32 te_out;
+	u32 int_enable_bit = SOC_DTS_TE_APICA_ENABLE;
+	struct intel_soc_dts_sensors *sensors = dts->sensors;
+
+	if (sensors->intr_type == INTEL_SOC_DTS_INTERRUPT_MSI)
+		int_enable_bit |= SOC_DTS_TE_MSI_ENABLE;
+
+	temp_out = (sensors->tj_max - temp) / 1000;
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_OFFSET_PTPS, &store_ptps);
+	if (status)
+		return status;
+
+	update_ptps = store_ptps;
+	bitmap_set_value8(&update_ptps, temp_out & 0xFF, thres_index * 8);
+	out = update_ptps;
+
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+				SOC_DTS_OFFSET_PTPS, out);
+	if (status)
+		return status;
+
+	pr_debug("update_trip_temp PTPS = %x\n", out);
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_OFFSET_PTMC, &out);
+	if (status)
+		goto err_restore_ptps;
+
+	store_ptmc = out;
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_TE_AUX0 + thres_index,
+			       &te_out);
+	if (status)
+		goto err_restore_ptmc;
+
+	store_te_out = te_out;
+	/* Enable for CPU module 0 and module 1 */
+	out |= (SOC_DTS_CPU_MODULE0_ENABLE_BIT |
+					SOC_DTS_CPU_MODULE1_ENABLE_BIT);
+	if (temp) {
+		if (thres_index)
+			out |= SOC_DTS_AUX1_ENABLE_BIT;
+		else
+			out |= SOC_DTS_AUX0_ENABLE_BIT;
+		te_out |= int_enable_bit;
+	} else {
+		if (thres_index)
+			out &= ~SOC_DTS_AUX1_ENABLE_BIT;
+		else
+			out &= ~SOC_DTS_AUX0_ENABLE_BIT;
+		te_out &= ~int_enable_bit;
+	}
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+				SOC_DTS_OFFSET_PTMC, out);
+	if (status)
+		goto err_restore_te_out;
+
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+				SOC_DTS_TE_AUX0 + thres_index,
+				te_out);
+	if (status)
+		goto err_restore_te_out;
+
+	dts->trip_types[thres_index] = trip_type;
+
+	return 0;
+err_restore_te_out:
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+		       SOC_DTS_OFFSET_PTMC, store_te_out);
+err_restore_ptmc:
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+		       SOC_DTS_OFFSET_PTMC, store_ptmc);
+err_restore_ptps:
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+		       SOC_DTS_OFFSET_PTPS, store_ptps);
+	/* Nothing we can do if restore fails */
+
+	return status;
+}
+
+static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
+			     int temp)
+{
+	struct intel_soc_dts_sensor_entry *dts = tzd->devdata;
+	struct intel_soc_dts_sensors *sensors = dts->sensors;
+	int status;
+
+	if (temp > sensors->tj_max)
+		return -EINVAL;
+
+	mutex_lock(&sensors->dts_update_lock);
+	status = update_trip_temp(tzd->devdata, trip, temp,
+				  dts->trip_types[trip]);
+	mutex_unlock(&sensors->dts_update_lock);
+
+	return status;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *tzd,
+			     int trip, enum thermal_trip_type *type)
+{
+	struct intel_soc_dts_sensor_entry *dts;
+
+	dts = tzd->devdata;
+
+	*type = dts->trip_types[trip];
+
+	return 0;
+}
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzd,
+			     int *temp)
+{
+	int status;
+	u32 out;
+	struct intel_soc_dts_sensor_entry *dts;
+	struct intel_soc_dts_sensors *sensors;
+	unsigned long raw;
+
+	dts = tzd->devdata;
+	sensors = dts->sensors;
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_OFFSET_TEMP, &out);
+	if (status)
+		return status;
+
+	raw = out;
+	out = bitmap_get_value8(&raw, dts->id * 8) - SOC_DTS_TJMAX_ENCODING;
+	*temp = sensors->tj_max - out * 1000;
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+	.get_temp = sys_get_curr_temp,
+	.get_trip_temp = sys_get_trip_temp,
+	.get_trip_type = sys_get_trip_type,
+	.set_trip_temp = sys_set_trip_temp,
+};
+
+static int soc_dts_enable(int id)
+{
+	u32 out;
+	int ret;
+
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			    SOC_DTS_OFFSET_ENABLE, &out);
+	if (ret)
+		return ret;
+
+	if (!(out & BIT(id))) {
+		out |= BIT(id);
+		ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+				     SOC_DTS_OFFSET_ENABLE, out);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static void remove_dts_thermal_zone(struct intel_soc_dts_sensor_entry *dts)
+{
+	if (dts) {
+		iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+			       SOC_DTS_OFFSET_ENABLE, dts->store_status);
+		thermal_zone_device_unregister(dts->tzone);
+	}
+}
+
+static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
+				bool notification_support, int trip_cnt,
+				int read_only_trip_cnt)
+{
+	char name[10];
+	unsigned long trip;
+	int trip_count = 0;
+	int trip_mask = 0;
+	int writable_trip_cnt = 0;
+	unsigned long ptps;
+	u32 store_ptps;
+	unsigned long i;
+	int ret;
+
+	/* Store status to restor on exit */
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			    SOC_DTS_OFFSET_ENABLE, &dts->store_status);
+	if (ret)
+		goto err_ret;
+
+	dts->id = id;
+	if (notification_support) {
+		trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
+		writable_trip_cnt = trip_count - read_only_trip_cnt;
+		trip_mask = GENMASK(writable_trip_cnt - 1, 0);
+	}
+
+	/* Check if the writable trip we provide is not used by BIOS */
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			    SOC_DTS_OFFSET_PTPS, &store_ptps);
+	if (ret)
+		trip_mask = 0;
+	else {
+		ptps = store_ptps;
+		for_each_set_clump8(i, trip, &ptps, writable_trip_cnt * 8)
+			trip_mask &= ~BIT(i / 8);
+	}
+	dts->trip_mask = trip_mask;
+	dts->trip_count = trip_count;
+	snprintf(name, sizeof(name), "soc_dts%d", id);
+	dts->tzone = thermal_zone_device_register(name,
+						  trip_count,
+						  trip_mask,
+						  dts, &tzone_ops,
+						  NULL, 0, 0);
+	if (IS_ERR(dts->tzone)) {
+		ret = PTR_ERR(dts->tzone);
+		goto err_ret;
+	}
+	ret = thermal_zone_device_enable(dts->tzone);
+	if (ret)
+		goto err_enable;
+
+	ret = soc_dts_enable(id);
+	if (ret)
+		goto err_enable;
+
+	return 0;
+err_enable:
+	thermal_zone_device_unregister(dts->tzone);
+err_ret:
+	return ret;
+}
+
+int intel_soc_dts_iosf_add_read_only_critical_trip(
+	struct intel_soc_dts_sensors *sensors, int critical_offset)
+{
+	int i, j;
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		struct intel_soc_dts_sensor_entry *entry = &sensors->soc_dts[i];
+		int temp = sensors->tj_max - critical_offset;
+		unsigned long count = entry->trip_count;
+		unsigned long mask = entry->trip_mask;
+
+		j = find_first_zero_bit(&mask, count);
+		if (j < count)
+			return update_trip_temp(entry, j, temp, THERMAL_TRIP_CRITICAL);
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(intel_soc_dts_iosf_add_read_only_critical_trip);
+
+void intel_soc_dts_iosf_interrupt_handler(struct intel_soc_dts_sensors *sensors)
+{
+	u32 sticky_out;
+	int status;
+	u32 ptmc_out;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sensors->intr_notify_lock, flags);
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_OFFSET_PTMC, &ptmc_out);
+	ptmc_out |= SOC_DTS_PTMC_APIC_DEASSERT_BIT;
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+				SOC_DTS_OFFSET_PTMC, ptmc_out);
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			       SOC_DTS_OFFSET_PTTSS, &sticky_out);
+	pr_debug("status %d PTTSS %x\n", status, sticky_out);
+	if (sticky_out & SOC_DTS_TRIP_MASK) {
+		int i;
+		/* reset sticky bit */
+		status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
+					SOC_DTS_OFFSET_PTTSS, sticky_out);
+		spin_unlock_irqrestore(&sensors->intr_notify_lock, flags);
+
+		for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+			pr_debug("TZD update for zone %d\n", i);
+			thermal_zone_device_update(sensors->soc_dts[i].tzone,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+	} else
+		spin_unlock_irqrestore(&sensors->intr_notify_lock, flags);
+}
+EXPORT_SYMBOL_GPL(intel_soc_dts_iosf_interrupt_handler);
+
+struct intel_soc_dts_sensors *intel_soc_dts_iosf_init(
+	enum intel_soc_dts_interrupt_type intr_type, int trip_count,
+	int read_only_trip_count)
+{
+	struct intel_soc_dts_sensors *sensors;
+	bool notification;
+	int tj_max;
+	int ret;
+	int i;
+
+	if (!iosf_mbi_available())
+		return ERR_PTR(-ENODEV);
+
+	if (!trip_count || read_only_trip_count > trip_count)
+		return ERR_PTR(-EINVAL);
+
+	if (get_tj_max(&tj_max))
+		return ERR_PTR(-EINVAL);
+
+	sensors = kzalloc(sizeof(*sensors), GFP_KERNEL);
+	if (!sensors)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&sensors->intr_notify_lock);
+	mutex_init(&sensors->dts_update_lock);
+	sensors->intr_type = intr_type;
+	sensors->tj_max = tj_max;
+	if (intr_type == INTEL_SOC_DTS_INTERRUPT_NONE)
+		notification = false;
+	else
+		notification = true;
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		sensors->soc_dts[i].sensors = sensors;
+		ret = add_dts_thermal_zone(i, &sensors->soc_dts[i],
+					   notification, trip_count,
+					   read_only_trip_count);
+		if (ret)
+			goto err_free;
+	}
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		ret = update_trip_temp(&sensors->soc_dts[i], 0, 0,
+				       THERMAL_TRIP_PASSIVE);
+		if (ret)
+			goto err_remove_zone;
+
+		ret = update_trip_temp(&sensors->soc_dts[i], 1, 0,
+				       THERMAL_TRIP_PASSIVE);
+		if (ret)
+			goto err_remove_zone;
+	}
+
+	return sensors;
+err_remove_zone:
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i)
+		remove_dts_thermal_zone(&sensors->soc_dts[i]);
+
+err_free:
+	kfree(sensors);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(intel_soc_dts_iosf_init);
+
+void intel_soc_dts_iosf_exit(struct intel_soc_dts_sensors *sensors)
+{
+	int i;
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		update_trip_temp(&sensors->soc_dts[i], 0, 0, 0);
+		update_trip_temp(&sensors->soc_dts[i], 1, 0, 0);
+		remove_dts_thermal_zone(&sensors->soc_dts[i]);
+	}
+	kfree(sensors);
+}
+EXPORT_SYMBOL_GPL(intel_soc_dts_iosf_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h
new file mode 100644
index 000000000..c54945748
--- /dev/null
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * intel_soc_dts_iosf.h
+ * Copyright (c) 2015, Intel Corporation.
+ */
+
+#ifndef _INTEL_SOC_DTS_IOSF_CORE_H
+#define _INTEL_SOC_DTS_IOSF_CORE_H
+
+#include <linux/thermal.h>
+
+/* DTS0 and DTS 1 */
+#define SOC_MAX_DTS_SENSORS	2
+
+enum intel_soc_dts_interrupt_type {
+	INTEL_SOC_DTS_INTERRUPT_NONE,
+	INTEL_SOC_DTS_INTERRUPT_APIC,
+	INTEL_SOC_DTS_INTERRUPT_MSI,
+	INTEL_SOC_DTS_INTERRUPT_SCI,
+	INTEL_SOC_DTS_INTERRUPT_SMI,
+};
+
+struct intel_soc_dts_sensors;
+
+struct intel_soc_dts_sensor_entry {
+	int id;
+	u32 store_status;
+	u32 trip_mask;
+	u32 trip_count;
+	enum thermal_trip_type trip_types[2];
+	struct thermal_zone_device *tzone;
+	struct intel_soc_dts_sensors *sensors;
+};
+
+struct intel_soc_dts_sensors {
+	u32 tj_max;
+	spinlock_t intr_notify_lock;
+	struct mutex dts_update_lock;
+	enum intel_soc_dts_interrupt_type intr_type;
+	struct intel_soc_dts_sensor_entry soc_dts[SOC_MAX_DTS_SENSORS];
+};
+
+struct intel_soc_dts_sensors *intel_soc_dts_iosf_init(
+	enum intel_soc_dts_interrupt_type intr_type, int trip_count,
+	int read_only_trip_count);
+void intel_soc_dts_iosf_exit(struct intel_soc_dts_sensors *sensors);
+void intel_soc_dts_iosf_interrupt_handler(
+				struct intel_soc_dts_sensors *sensors);
+int intel_soc_dts_iosf_add_read_only_critical_trip(
+	struct intel_soc_dts_sensors *sensors, int critical_offset);
+#endif
diff --git a/drivers/thermal/intel/intel_soc_dts_thermal.c b/drivers/thermal/intel/intel_soc_dts_thermal.c
new file mode 100644
index 000000000..92e5c19d0
--- /dev/null
+++ b/drivers/thermal/intel/intel_soc_dts_thermal.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * intel_soc_dts_thermal.c
+ * Copyright (c) 2014, Intel Corporation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include "intel_soc_dts_iosf.h"
+
+#define CRITICAL_OFFSET_FROM_TJ_MAX	5000
+
+static int crit_offset = CRITICAL_OFFSET_FROM_TJ_MAX;
+module_param(crit_offset, int, 0644);
+MODULE_PARM_DESC(crit_offset,
+	"Critical Temperature offset from tj max in millidegree Celsius.");
+
+/* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */
+#define BYT_SOC_DTS_APIC_IRQ	86
+
+static int soc_dts_thres_gsi;
+static int soc_dts_thres_irq;
+static struct intel_soc_dts_sensors *soc_dts;
+
+static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
+{
+	pr_debug("proc_thermal_interrupt\n");
+	intel_soc_dts_iosf_interrupt_handler(soc_dts);
+
+	return IRQ_HANDLED;
+}
+
+static const struct x86_cpu_id soc_thermal_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, BYT_SOC_DTS_APIC_IRQ),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids);
+
+static int __init intel_soc_thermal_init(void)
+{
+	int err = 0;
+	const struct x86_cpu_id *match_cpu;
+
+	match_cpu = x86_match_cpu(soc_thermal_ids);
+	if (!match_cpu)
+		return -ENODEV;
+
+	/* Create a zone with 2 trips with marked as read only */
+	soc_dts = intel_soc_dts_iosf_init(INTEL_SOC_DTS_INTERRUPT_APIC, 2, 1);
+	if (IS_ERR(soc_dts)) {
+		err = PTR_ERR(soc_dts);
+		return err;
+	}
+
+	soc_dts_thres_gsi = (int)match_cpu->driver_data;
+	if (soc_dts_thres_gsi) {
+		/*
+		 * Note the flags here MUST match the firmware defaults, rather
+		 * then the request_irq flags, otherwise we get an EBUSY error.
+		 */
+		soc_dts_thres_irq = acpi_register_gsi(NULL, soc_dts_thres_gsi,
+						      ACPI_LEVEL_SENSITIVE,
+						      ACPI_ACTIVE_LOW);
+		if (soc_dts_thres_irq < 0) {
+			pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n",
+				soc_dts_thres_gsi, soc_dts_thres_irq);
+			soc_dts_thres_irq = 0;
+		}
+	}
+
+	if (soc_dts_thres_irq) {
+		err = request_threaded_irq(soc_dts_thres_irq, NULL,
+					   soc_irq_thread_fn,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "soc_dts", soc_dts);
+		if (err) {
+			/*
+			 * Do not just error out because the user space thermal
+			 * daemon such as DPTF may use polling instead of being
+			 * interrupt driven.
+			 */
+			pr_warn("request_threaded_irq ret %d\n", err);
+		}
+	}
+
+	err = intel_soc_dts_iosf_add_read_only_critical_trip(soc_dts,
+							     crit_offset);
+	if (err)
+		goto error_trips;
+
+	return 0;
+
+error_trips:
+	if (soc_dts_thres_irq) {
+		free_irq(soc_dts_thres_irq, soc_dts);
+		acpi_unregister_gsi(soc_dts_thres_gsi);
+	}
+	intel_soc_dts_iosf_exit(soc_dts);
+
+	return err;
+}
+
+static void __exit intel_soc_thermal_exit(void)
+{
+	if (soc_dts_thres_irq) {
+		free_irq(soc_dts_thres_irq, soc_dts);
+		acpi_unregister_gsi(soc_dts_thres_gsi);
+	}
+	intel_soc_dts_iosf_exit(soc_dts);
+}
+
+module_init(intel_soc_thermal_init)
+module_exit(intel_soc_thermal_exit)
+
+MODULE_DESCRIPTION("Intel SoC DTS Thermal Driver");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/intel_tcc_cooling.c b/drivers/thermal/intel/intel_tcc_cooling.c
new file mode 100644
index 000000000..95adac427
--- /dev/null
+++ b/drivers/thermal/intel/intel_tcc_cooling.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cooling device driver that activates the processor throttling by
+ * programming the TCC Offset register.
+ * Copyright (c) 2021, Intel Corporation.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/thermal.h>
+#include <asm/cpu_device_id.h>
+
+#define TCC_SHIFT 24
+#define TCC_MASK	(0x3fULL<<24)
+#define TCC_PROGRAMMABLE	BIT(30)
+
+static struct thermal_cooling_device *tcc_cdev;
+
+static int tcc_get_max_state(struct thermal_cooling_device *cdev, unsigned long
+			     *state)
+{
+	*state = TCC_MASK >> TCC_SHIFT;
+	return 0;
+}
+
+static int tcc_offset_update(int tcc)
+{
+	u64 val;
+	int err;
+
+	err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
+	if (err)
+		return err;
+
+	val &= ~TCC_MASK;
+	val |= tcc << TCC_SHIFT;
+
+	err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int tcc_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
+			     *state)
+{
+	u64 val;
+	int err;
+
+	err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
+	if (err)
+		return err;
+
+	*state = (val & TCC_MASK) >> TCC_SHIFT;
+	return 0;
+}
+
+static int tcc_set_cur_state(struct thermal_cooling_device *cdev, unsigned long
+			     state)
+{
+	return tcc_offset_update(state);
+}
+
+static const struct thermal_cooling_device_ops tcc_cooling_ops = {
+	.get_max_state = tcc_get_max_state,
+	.get_cur_state = tcc_get_cur_state,
+	.set_cur_state = tcc_set_cur_state,
+};
+
+static const struct x86_cpu_id tcc_ids[] __initconst = {
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P, NULL),
+	{}
+};
+
+MODULE_DEVICE_TABLE(x86cpu, tcc_ids);
+
+static int __init tcc_cooling_init(void)
+{
+	int ret;
+	u64 val;
+	const struct x86_cpu_id *id;
+
+	int err;
+
+	id = x86_match_cpu(tcc_ids);
+	if (!id)
+		return -ENODEV;
+
+	err = rdmsrl_safe(MSR_PLATFORM_INFO, &val);
+	if (err)
+		return err;
+
+	if (!(val & TCC_PROGRAMMABLE))
+		return -ENODEV;
+
+	pr_info("Programmable TCC Offset detected\n");
+
+	tcc_cdev =
+	    thermal_cooling_device_register("TCC Offset", NULL,
+					    &tcc_cooling_ops);
+	if (IS_ERR(tcc_cdev)) {
+		ret = PTR_ERR(tcc_cdev);
+		return ret;
+	}
+	return 0;
+}
+
+module_init(tcc_cooling_init)
+
+static void __exit tcc_cooling_exit(void)
+{
+	thermal_cooling_device_unregister(tcc_cdev);
+}
+
+module_exit(tcc_cooling_exit)
+
+MODULE_DESCRIPTION("TCC offset cooling device Driver");
+MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/therm_throt.c b/drivers/thermal/intel/therm_throt.c
new file mode 100644
index 000000000..8352083b8
--- /dev/null
+++ b/drivers/thermal/intel/therm_throt.c
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Thermal throttle event support code (such as syslog messaging and rate
+ * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ *
+ * This allows consistent reporting of CPU thermal throttle events.
+ *
+ * Maintains a counter in /sys that keeps track of the number of thermal
+ * events, such that the user knows how bad the thermal problem might be
+ * (since the logging to syslog is rate limited).
+ *
+ * Author: Dmitriy Zavin (dmitriyz@google.com)
+ *
+ * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
+ *          Inspired by Ross Biro's and Al Borchers' counter code.
+ */
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+
+#include <asm/processor.h>
+#include <asm/thermal.h>
+#include <asm/traps.h>
+#include <asm/apic.h>
+#include <asm/irq.h>
+#include <asm/msr.h>
+
+#include "intel_hfi.h"
+#include "thermal_interrupt.h"
+
+/* How long to wait between reporting thermal events */
+#define CHECK_INTERVAL		(300 * HZ)
+
+#define THERMAL_THROTTLING_EVENT	0
+#define POWER_LIMIT_EVENT		1
+
+/**
+ * struct _thermal_state - Represent the current thermal event state
+ * @next_check:			Stores the next timestamp, when it is allowed
+ *				to log the next warning message.
+ * @last_interrupt_time:	Stores the timestamp for the last threshold
+ *				high event.
+ * @therm_work:			Delayed workqueue structure
+ * @count:			Stores the current running count for thermal
+ *				or power threshold interrupts.
+ * @last_count:			Stores the previous running count for thermal
+ *				or power threshold interrupts.
+ * @max_time_ms:		This shows the maximum amount of time CPU was
+ *				in throttled state for a single thermal
+ *				threshold high to low state.
+ * @total_time_ms:		This is a cumulative time during which CPU was
+ *				in the throttled state.
+ * @rate_control_active:	Set when a throttling message is logged.
+ *				This is used for the purpose of rate-control.
+ * @new_event:			Stores the last high/low status of the
+ *				THERM_STATUS_PROCHOT or
+ *				THERM_STATUS_POWER_LIMIT.
+ * @level:			Stores whether this _thermal_state instance is
+ *				for a CORE level or for PACKAGE level.
+ * @sample_index:		Index for storing the next sample in the buffer
+ *				temp_samples[].
+ * @sample_count:		Total number of samples collected in the buffer
+ *				temp_samples[].
+ * @average:			The last moving average of temperature samples
+ * @baseline_temp:		Temperature at which thermal threshold high
+ *				interrupt was generated.
+ * @temp_samples:		Storage for temperature samples to calculate
+ *				moving average.
+ *
+ * This structure is used to represent data related to thermal state for a CPU.
+ * There is a separate storage for core and package level for each CPU.
+ */
+struct _thermal_state {
+	u64			next_check;
+	u64			last_interrupt_time;
+	struct delayed_work	therm_work;
+	unsigned long		count;
+	unsigned long		last_count;
+	unsigned long		max_time_ms;
+	unsigned long		total_time_ms;
+	bool			rate_control_active;
+	bool			new_event;
+	u8			level;
+	u8			sample_index;
+	u8			sample_count;
+	u8			average;
+	u8			baseline_temp;
+	u8			temp_samples[3];
+};
+
+struct thermal_state {
+	struct _thermal_state core_throttle;
+	struct _thermal_state core_power_limit;
+	struct _thermal_state package_throttle;
+	struct _thermal_state package_power_limit;
+	struct _thermal_state core_thresh0;
+	struct _thermal_state core_thresh1;
+	struct _thermal_state pkg_thresh0;
+	struct _thermal_state pkg_thresh1;
+};
+
+/* Callback to handle core threshold interrupts */
+int (*platform_thermal_notify)(__u64 msr_val);
+EXPORT_SYMBOL(platform_thermal_notify);
+
+/* Callback to handle core package threshold_interrupts */
+int (*platform_thermal_package_notify)(__u64 msr_val);
+EXPORT_SYMBOL_GPL(platform_thermal_package_notify);
+
+/* Callback support of rate control, return true, if
+ * callback has rate control */
+bool (*platform_thermal_package_rate_control)(void);
+EXPORT_SYMBOL_GPL(platform_thermal_package_rate_control);
+
+
+static DEFINE_PER_CPU(struct thermal_state, thermal_state);
+
+static atomic_t therm_throt_en	= ATOMIC_INIT(0);
+
+static u32 lvtthmr_init __read_mostly;
+
+#ifdef CONFIG_SYSFS
+#define define_therm_throt_device_one_ro(_name)				\
+	static DEVICE_ATTR(_name, 0444,					\
+			   therm_throt_device_show_##_name,		\
+				   NULL)				\
+
+#define define_therm_throt_device_show_func(event, name)		\
+									\
+static ssize_t therm_throt_device_show_##event##_##name(		\
+			struct device *dev,				\
+			struct device_attribute *attr,			\
+			char *buf)					\
+{									\
+	unsigned int cpu = dev->id;					\
+	ssize_t ret;							\
+									\
+	preempt_disable();	/* CPU hotplug */			\
+	if (cpu_online(cpu)) {						\
+		ret = sprintf(buf, "%lu\n",				\
+			      per_cpu(thermal_state, cpu).event.name);	\
+	} else								\
+		ret = 0;						\
+	preempt_enable();						\
+									\
+	return ret;							\
+}
+
+define_therm_throt_device_show_func(core_throttle, count);
+define_therm_throt_device_one_ro(core_throttle_count);
+
+define_therm_throt_device_show_func(core_power_limit, count);
+define_therm_throt_device_one_ro(core_power_limit_count);
+
+define_therm_throt_device_show_func(package_throttle, count);
+define_therm_throt_device_one_ro(package_throttle_count);
+
+define_therm_throt_device_show_func(package_power_limit, count);
+define_therm_throt_device_one_ro(package_power_limit_count);
+
+define_therm_throt_device_show_func(core_throttle, max_time_ms);
+define_therm_throt_device_one_ro(core_throttle_max_time_ms);
+
+define_therm_throt_device_show_func(package_throttle, max_time_ms);
+define_therm_throt_device_one_ro(package_throttle_max_time_ms);
+
+define_therm_throt_device_show_func(core_throttle, total_time_ms);
+define_therm_throt_device_one_ro(core_throttle_total_time_ms);
+
+define_therm_throt_device_show_func(package_throttle, total_time_ms);
+define_therm_throt_device_one_ro(package_throttle_total_time_ms);
+
+static struct attribute *thermal_throttle_attrs[] = {
+	&dev_attr_core_throttle_count.attr,
+	&dev_attr_core_throttle_max_time_ms.attr,
+	&dev_attr_core_throttle_total_time_ms.attr,
+	NULL
+};
+
+static const struct attribute_group thermal_attr_group = {
+	.attrs	= thermal_throttle_attrs,
+	.name	= "thermal_throttle"
+};
+#endif /* CONFIG_SYSFS */
+
+#define CORE_LEVEL	0
+#define PACKAGE_LEVEL	1
+
+#define THERM_THROT_POLL_INTERVAL	HZ
+#define THERM_STATUS_PROCHOT_LOG	BIT(1)
+
+#define THERM_STATUS_CLEAR_CORE_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11) | BIT(13) | BIT(15))
+#define THERM_STATUS_CLEAR_PKG_MASK  (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11))
+
+static void clear_therm_status_log(int level)
+{
+	int msr;
+	u64 mask, msr_val;
+
+	if (level == CORE_LEVEL) {
+		msr  = MSR_IA32_THERM_STATUS;
+		mask = THERM_STATUS_CLEAR_CORE_MASK;
+	} else {
+		msr  = MSR_IA32_PACKAGE_THERM_STATUS;
+		mask = THERM_STATUS_CLEAR_PKG_MASK;
+	}
+
+	rdmsrl(msr, msr_val);
+	msr_val &= mask;
+	wrmsrl(msr, msr_val & ~THERM_STATUS_PROCHOT_LOG);
+}
+
+static void get_therm_status(int level, bool *proc_hot, u8 *temp)
+{
+	int msr;
+	u64 msr_val;
+
+	if (level == CORE_LEVEL)
+		msr = MSR_IA32_THERM_STATUS;
+	else
+		msr = MSR_IA32_PACKAGE_THERM_STATUS;
+
+	rdmsrl(msr, msr_val);
+	if (msr_val & THERM_STATUS_PROCHOT_LOG)
+		*proc_hot = true;
+	else
+		*proc_hot = false;
+
+	*temp = (msr_val >> 16) & 0x7F;
+}
+
+static void __maybe_unused throttle_active_work(struct work_struct *work)
+{
+	struct _thermal_state *state = container_of(to_delayed_work(work),
+						struct _thermal_state, therm_work);
+	unsigned int i, avg, this_cpu = smp_processor_id();
+	u64 now = get_jiffies_64();
+	bool hot;
+	u8 temp;
+
+	get_therm_status(state->level, &hot, &temp);
+	/* temperature value is offset from the max so lesser means hotter */
+	if (!hot && temp > state->baseline_temp) {
+		if (state->rate_control_active)
+			pr_info("CPU%d: %s temperature/speed normal (total events = %lu)\n",
+				this_cpu,
+				state->level == CORE_LEVEL ? "Core" : "Package",
+				state->count);
+
+		state->rate_control_active = false;
+		return;
+	}
+
+	if (time_before64(now, state->next_check) &&
+			  state->rate_control_active)
+		goto re_arm;
+
+	state->next_check = now + CHECK_INTERVAL;
+
+	if (state->count != state->last_count) {
+		/* There was one new thermal interrupt */
+		state->last_count = state->count;
+		state->average = 0;
+		state->sample_count = 0;
+		state->sample_index = 0;
+	}
+
+	state->temp_samples[state->sample_index] = temp;
+	state->sample_count++;
+	state->sample_index = (state->sample_index + 1) % ARRAY_SIZE(state->temp_samples);
+	if (state->sample_count < ARRAY_SIZE(state->temp_samples))
+		goto re_arm;
+
+	avg = 0;
+	for (i = 0; i < ARRAY_SIZE(state->temp_samples); ++i)
+		avg += state->temp_samples[i];
+
+	avg /= ARRAY_SIZE(state->temp_samples);
+
+	if (state->average > avg) {
+		pr_warn("CPU%d: %s temperature is above threshold, cpu clock is throttled (total events = %lu)\n",
+			this_cpu,
+			state->level == CORE_LEVEL ? "Core" : "Package",
+			state->count);
+		state->rate_control_active = true;
+	}
+
+	state->average = avg;
+
+re_arm:
+	clear_therm_status_log(state->level);
+	schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL);
+}
+
+/***
+ * therm_throt_process - Process thermal throttling event from interrupt
+ * @curr: Whether the condition is current or not (boolean), since the
+ *        thermal interrupt normally gets called both when the thermal
+ *        event begins and once the event has ended.
+ *
+ * This function is called by the thermal interrupt after the
+ * IRQ has been acknowledged.
+ *
+ * It will take care of rate limiting and printing messages to the syslog.
+ */
+static void therm_throt_process(bool new_event, int event, int level)
+{
+	struct _thermal_state *state;
+	unsigned int this_cpu = smp_processor_id();
+	bool old_event;
+	u64 now;
+	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
+
+	now = get_jiffies_64();
+	if (level == CORE_LEVEL) {
+		if (event == THERMAL_THROTTLING_EVENT)
+			state = &pstate->core_throttle;
+		else if (event == POWER_LIMIT_EVENT)
+			state = &pstate->core_power_limit;
+		else
+			return;
+	} else if (level == PACKAGE_LEVEL) {
+		if (event == THERMAL_THROTTLING_EVENT)
+			state = &pstate->package_throttle;
+		else if (event == POWER_LIMIT_EVENT)
+			state = &pstate->package_power_limit;
+		else
+			return;
+	} else
+		return;
+
+	old_event = state->new_event;
+	state->new_event = new_event;
+
+	if (new_event)
+		state->count++;
+
+	if (event != THERMAL_THROTTLING_EVENT)
+		return;
+
+	if (new_event && !state->last_interrupt_time) {
+		bool hot;
+		u8 temp;
+
+		get_therm_status(state->level, &hot, &temp);
+		/*
+		 * Ignore short temperature spike as the system is not close
+		 * to PROCHOT. 10C offset is large enough to ignore. It is
+		 * already dropped from the high threshold temperature.
+		 */
+		if (temp > 10)
+			return;
+
+		state->baseline_temp = temp;
+		state->last_interrupt_time = now;
+		schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL);
+	} else if (old_event && state->last_interrupt_time) {
+		unsigned long throttle_time;
+
+		throttle_time = jiffies_delta_to_msecs(now - state->last_interrupt_time);
+		if (throttle_time > state->max_time_ms)
+			state->max_time_ms = throttle_time;
+		state->total_time_ms += throttle_time;
+		state->last_interrupt_time = 0;
+	}
+}
+
+static int thresh_event_valid(int level, int event)
+{
+	struct _thermal_state *state;
+	unsigned int this_cpu = smp_processor_id();
+	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
+	u64 now = get_jiffies_64();
+
+	if (level == PACKAGE_LEVEL)
+		state = (event == 0) ? &pstate->pkg_thresh0 :
+						&pstate->pkg_thresh1;
+	else
+		state = (event == 0) ? &pstate->core_thresh0 :
+						&pstate->core_thresh1;
+
+	if (time_before64(now, state->next_check))
+		return 0;
+
+	state->next_check = now + CHECK_INTERVAL;
+
+	return 1;
+}
+
+static bool int_pln_enable;
+static int __init int_pln_enable_setup(char *s)
+{
+	int_pln_enable = true;
+
+	return 1;
+}
+__setup("int_pln_enable", int_pln_enable_setup);
+
+#ifdef CONFIG_SYSFS
+/* Add/Remove thermal_throttle interface for CPU device: */
+static int thermal_throttle_add_dev(struct device *dev, unsigned int cpu)
+{
+	int err;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
+	if (err)
+		return err;
+
+	if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) {
+		err = sysfs_add_file_to_group(&dev->kobj,
+					      &dev_attr_core_power_limit_count.attr,
+					      thermal_attr_group.name);
+		if (err)
+			goto del_group;
+	}
+
+	if (cpu_has(c, X86_FEATURE_PTS)) {
+		err = sysfs_add_file_to_group(&dev->kobj,
+					      &dev_attr_package_throttle_count.attr,
+					      thermal_attr_group.name);
+		if (err)
+			goto del_group;
+
+		err = sysfs_add_file_to_group(&dev->kobj,
+					      &dev_attr_package_throttle_max_time_ms.attr,
+					      thermal_attr_group.name);
+		if (err)
+			goto del_group;
+
+		err = sysfs_add_file_to_group(&dev->kobj,
+					      &dev_attr_package_throttle_total_time_ms.attr,
+					      thermal_attr_group.name);
+		if (err)
+			goto del_group;
+
+		if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) {
+			err = sysfs_add_file_to_group(&dev->kobj,
+					&dev_attr_package_power_limit_count.attr,
+					thermal_attr_group.name);
+			if (err)
+				goto del_group;
+		}
+	}
+
+	return 0;
+
+del_group:
+	sysfs_remove_group(&dev->kobj, &thermal_attr_group);
+
+	return err;
+}
+
+static void thermal_throttle_remove_dev(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &thermal_attr_group);
+}
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static int thermal_throttle_online(unsigned int cpu)
+{
+	struct thermal_state *state = &per_cpu(thermal_state, cpu);
+	struct device *dev = get_cpu_device(cpu);
+	u32 l;
+
+	state->package_throttle.level = PACKAGE_LEVEL;
+	state->core_throttle.level = CORE_LEVEL;
+
+	INIT_DELAYED_WORK(&state->package_throttle.therm_work, throttle_active_work);
+	INIT_DELAYED_WORK(&state->core_throttle.therm_work, throttle_active_work);
+
+	/*
+	 * The first CPU coming online will enable the HFI. Usually this causes
+	 * hardware to issue an HFI thermal interrupt. Such interrupt will reach
+	 * the CPU once we enable the thermal vector in the local APIC.
+	 */
+	intel_hfi_online(cpu);
+
+	/* Unmask the thermal vector after the above workqueues are initialized. */
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+	return thermal_throttle_add_dev(dev, cpu);
+}
+
+static int thermal_throttle_offline(unsigned int cpu)
+{
+	struct thermal_state *state = &per_cpu(thermal_state, cpu);
+	struct device *dev = get_cpu_device(cpu);
+	u32 l;
+
+	/* Mask the thermal vector before draining evtl. pending work */
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED);
+
+	intel_hfi_offline(cpu);
+
+	cancel_delayed_work_sync(&state->package_throttle.therm_work);
+	cancel_delayed_work_sync(&state->core_throttle.therm_work);
+
+	state->package_throttle.rate_control_active = false;
+	state->core_throttle.rate_control_active = false;
+
+	thermal_throttle_remove_dev(dev);
+	return 0;
+}
+
+static __init int thermal_throttle_init_device(void)
+{
+	int ret;
+
+	if (!atomic_read(&therm_throt_en))
+		return 0;
+
+	intel_hfi_init();
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/therm:online",
+				thermal_throttle_online,
+				thermal_throttle_offline);
+	return ret < 0 ? ret : 0;
+}
+device_initcall(thermal_throttle_init_device);
+
+#endif /* CONFIG_SYSFS */
+
+static void notify_package_thresholds(__u64 msr_val)
+{
+	bool notify_thres_0 = false;
+	bool notify_thres_1 = false;
+
+	if (!platform_thermal_package_notify)
+		return;
+
+	/* lower threshold check */
+	if (msr_val & THERM_LOG_THRESHOLD0)
+		notify_thres_0 = true;
+	/* higher threshold check */
+	if (msr_val & THERM_LOG_THRESHOLD1)
+		notify_thres_1 = true;
+
+	if (!notify_thres_0 && !notify_thres_1)
+		return;
+
+	if (platform_thermal_package_rate_control &&
+		platform_thermal_package_rate_control()) {
+		/* Rate control is implemented in callback */
+		platform_thermal_package_notify(msr_val);
+		return;
+	}
+
+	/* lower threshold reached */
+	if (notify_thres_0 && thresh_event_valid(PACKAGE_LEVEL, 0))
+		platform_thermal_package_notify(msr_val);
+	/* higher threshold reached */
+	if (notify_thres_1 && thresh_event_valid(PACKAGE_LEVEL, 1))
+		platform_thermal_package_notify(msr_val);
+}
+
+static void notify_thresholds(__u64 msr_val)
+{
+	/* check whether the interrupt handler is defined;
+	 * otherwise simply return
+	 */
+	if (!platform_thermal_notify)
+		return;
+
+	/* lower threshold reached */
+	if ((msr_val & THERM_LOG_THRESHOLD0) &&
+			thresh_event_valid(CORE_LEVEL, 0))
+		platform_thermal_notify(msr_val);
+	/* higher threshold reached */
+	if ((msr_val & THERM_LOG_THRESHOLD1) &&
+			thresh_event_valid(CORE_LEVEL, 1))
+		platform_thermal_notify(msr_val);
+}
+
+void __weak notify_hwp_interrupt(void)
+{
+	wrmsrl_safe(MSR_HWP_STATUS, 0);
+}
+
+/* Thermal transition interrupt handler */
+void intel_thermal_interrupt(void)
+{
+	__u64 msr_val;
+
+	if (static_cpu_has(X86_FEATURE_HWP))
+		notify_hwp_interrupt();
+
+	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+
+	/* Check for violation of core thermal thresholds*/
+	notify_thresholds(msr_val);
+
+	therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
+			    THERMAL_THROTTLING_EVENT,
+			    CORE_LEVEL);
+
+	if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable)
+		therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
+					POWER_LIMIT_EVENT,
+					CORE_LEVEL);
+
+	if (this_cpu_has(X86_FEATURE_PTS)) {
+		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
+		/* check violations of package thermal thresholds */
+		notify_package_thresholds(msr_val);
+		therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
+					THERMAL_THROTTLING_EVENT,
+					PACKAGE_LEVEL);
+		if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable)
+			therm_throt_process(msr_val &
+					PACKAGE_THERM_STATUS_POWER_LIMIT,
+					POWER_LIMIT_EVENT,
+					PACKAGE_LEVEL);
+
+		if (this_cpu_has(X86_FEATURE_HFI))
+			intel_hfi_process_event(msr_val &
+						PACKAGE_THERM_STATUS_HFI_UPDATED);
+	}
+}
+
+/* Thermal monitoring depends on APIC, ACPI and clock modulation */
+static int intel_thermal_supported(struct cpuinfo_x86 *c)
+{
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return 0;
+	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+		return 0;
+	return 1;
+}
+
+bool x86_thermal_enabled(void)
+{
+	return atomic_read(&therm_throt_en);
+}
+
+void __init therm_lvt_init(void)
+{
+	/*
+	 * This function is only called on boot CPU. Save the init thermal
+	 * LVT value on BSP and use that value to restore APs' thermal LVT
+	 * entry BIOS programmed later
+	 */
+	if (intel_thermal_supported(&boot_cpu_data))
+		lvtthmr_init = apic_read(APIC_LVTTHMR);
+}
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+	unsigned int cpu = smp_processor_id();
+	int tm2 = 0;
+	u32 l, h;
+
+	if (!intel_thermal_supported(c))
+		return;
+
+	/*
+	 * First check if its enabled already, in which case there might
+	 * be some SMM goo which handles it, so we can't even put a handler
+	 * since it might be delivered via SMI already:
+	 */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+	h = lvtthmr_init;
+	/*
+	 * The initial value of thermal LVT entries on all APs always reads
+	 * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
+	 * sequence to them and LVT registers are reset to 0s except for
+	 * the mask bits which are set to 1s when APs receive INIT IPI.
+	 * If BIOS takes over the thermal interrupt and sets its interrupt
+	 * delivery mode to SMI (not fixed), it restores the value that the
+	 * BIOS has programmed on AP based on BSP's info we saved since BIOS
+	 * is always setting the same value for all threads/cores.
+	 */
+	if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
+		apic_write(APIC_LVTTHMR, lvtthmr_init);
+
+
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+		if (system_state == SYSTEM_BOOTING)
+			pr_debug("CPU%d: Thermal monitoring handled by SMI\n", cpu);
+		return;
+	}
+
+	/* early Pentium M models use different method for enabling TM2 */
+	if (cpu_has(c, X86_FEATURE_TM2)) {
+		if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) {
+			rdmsr(MSR_THERM2_CTL, l, h);
+			if (l & MSR_THERM2_CTL_TM_SELECT)
+				tm2 = 1;
+		} else if (l & MSR_IA32_MISC_ENABLE_TM2)
+			tm2 = 1;
+	}
+
+	/* We'll mask the thermal vector in the lapic till we're ready: */
+	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+	apic_write(APIC_LVTTHMR, h);
+
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable)
+		wrmsr(MSR_IA32_THERM_INTERRUPT,
+			(l | (THERM_INT_LOW_ENABLE
+			| THERM_INT_HIGH_ENABLE)) & ~THERM_INT_PLN_ENABLE, h);
+	else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable)
+		wrmsr(MSR_IA32_THERM_INTERRUPT,
+			l | (THERM_INT_LOW_ENABLE
+			| THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h);
+	else
+		wrmsr(MSR_IA32_THERM_INTERRUPT,
+		      l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+	if (cpu_has(c, X86_FEATURE_PTS)) {
+		rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+		if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable)
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+				(l | (PACKAGE_THERM_INT_LOW_ENABLE
+				| PACKAGE_THERM_INT_HIGH_ENABLE))
+				& ~PACKAGE_THERM_INT_PLN_ENABLE, h);
+		else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable)
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+				l | (PACKAGE_THERM_INT_LOW_ENABLE
+				| PACKAGE_THERM_INT_HIGH_ENABLE
+				| PACKAGE_THERM_INT_PLN_ENABLE), h);
+		else
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			      l | (PACKAGE_THERM_INT_LOW_ENABLE
+				| PACKAGE_THERM_INT_HIGH_ENABLE), h);
+
+		if (cpu_has(c, X86_FEATURE_HFI)) {
+			rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			      l | PACKAGE_THERM_INT_HFI_ENABLE, h);
+		}
+	}
+
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+	pr_info_once("CPU0: Thermal monitoring enabled (%s)\n",
+		      tm2 ? "TM2" : "TM1");
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
+}
diff --git a/drivers/thermal/intel/thermal_interrupt.h b/drivers/thermal/intel/thermal_interrupt.h
new file mode 100644
index 000000000..01e7bed2f
--- /dev/null
+++ b/drivers/thermal/intel/thermal_interrupt.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _INTEL_THERMAL_INTERRUPT_H
+#define _INTEL_THERMAL_INTERRUPT_H
+
+/* Interrupt Handler for package thermal thresholds */
+extern int (*platform_thermal_package_notify)(__u64 msr_val);
+
+/* Interrupt Handler for core thermal thresholds */
+extern int (*platform_thermal_notify)(__u64 msr_val);
+
+/* Callback support of rate control, return true, if
+ * callback has rate control */
+extern bool (*platform_thermal_package_rate_control)(void);
+
+/* Handle HWP interrupt */
+extern void notify_hwp_interrupt(void);
+
+#endif /* _INTEL_THERMAL_INTERRUPT_H */
diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c
new file mode 100644
index 000000000..a0e234fce
--- /dev/null
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * x86_pkg_temp_thermal driver
+ * Copyright (c) 2013, Intel Corporation.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/thermal.h>
+#include <linux/debugfs.h>
+
+#include <asm/cpu_device_id.h>
+
+#include "thermal_interrupt.h"
+
+/*
+* Rate control delay: Idea is to introduce denounce effect
+* This should be long enough to avoid reduce events, when
+* threshold is set to a temperature, which is constantly
+* violated, but at the short enough to take any action.
+* The action can be remove threshold or change it to next
+* interesting setting. Based on experiments, in around
+* every 5 seconds under load will give us a significant
+* temperature change.
+*/
+#define PKG_TEMP_THERMAL_NOTIFY_DELAY	5000
+static int notify_delay_ms = PKG_TEMP_THERMAL_NOTIFY_DELAY;
+module_param(notify_delay_ms, int, 0644);
+MODULE_PARM_DESC(notify_delay_ms,
+	"User space notification delay in milli seconds.");
+
+/* Number of trip points in thermal zone. Currently it can't
+* be more than 2. MSR can allow setting and getting notifications
+* for only 2 thresholds. This define enforces this, if there
+* is some wrong values returned by cpuid for number of thresholds.
+*/
+#define MAX_NUMBER_OF_TRIPS	2
+
+struct zone_device {
+	int				cpu;
+	bool				work_scheduled;
+	u32				tj_max;
+	u32				msr_pkg_therm_low;
+	u32				msr_pkg_therm_high;
+	struct delayed_work		work;
+	struct thermal_zone_device	*tzone;
+	struct cpumask			cpumask;
+};
+
+static struct thermal_zone_params pkg_temp_tz_params = {
+	.no_hwmon	= true,
+};
+
+/* Keep track of how many zone pointers we allocated in init() */
+static int max_id __read_mostly;
+/* Array of zone pointers */
+static struct zone_device **zones;
+/* Serializes interrupt notification, work and hotplug */
+static DEFINE_RAW_SPINLOCK(pkg_temp_lock);
+/* Protects zone operation in the work function against hotplug removal */
+static DEFINE_MUTEX(thermal_zone_mutex);
+
+/* The dynamically assigned cpu hotplug state for module_exit() */
+static enum cpuhp_state pkg_thermal_hp_state __read_mostly;
+
+/* Debug counters to show using debugfs */
+static struct dentry *debugfs;
+static unsigned int pkg_interrupt_cnt;
+static unsigned int pkg_work_cnt;
+
+static void pkg_temp_debugfs_init(void)
+{
+	debugfs = debugfs_create_dir("pkg_temp_thermal", NULL);
+
+	debugfs_create_u32("pkg_thres_interrupt", S_IRUGO, debugfs,
+			   &pkg_interrupt_cnt);
+	debugfs_create_u32("pkg_thres_work", S_IRUGO, debugfs,
+			   &pkg_work_cnt);
+}
+
+/*
+ * Protection:
+ *
+ * - cpu hotplug: Read serialized by cpu hotplug lock
+ *		  Write must hold pkg_temp_lock
+ *
+ * - Other callsites: Must hold pkg_temp_lock
+ */
+static struct zone_device *pkg_temp_thermal_get_dev(unsigned int cpu)
+{
+	int id = topology_logical_die_id(cpu);
+
+	if (id >= 0 && id < max_id)
+		return zones[id];
+	return NULL;
+}
+
+/*
+* tj-max is interesting because threshold is set relative to this
+* temperature.
+*/
+static int get_tj_max(int cpu, u32 *tj_max)
+{
+	u32 eax, edx, val;
+	int err;
+
+	err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
+	if (err)
+		return err;
+
+	val = (eax >> 16) & 0xff;
+	*tj_max = val * 1000;
+
+	return val ? 0 : -EINVAL;
+}
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp)
+{
+	struct zone_device *zonedev = tzd->devdata;
+	u32 eax, edx;
+
+	rdmsr_on_cpu(zonedev->cpu, MSR_IA32_PACKAGE_THERM_STATUS,
+			&eax, &edx);
+	if (eax & 0x80000000) {
+		*temp = zonedev->tj_max - ((eax >> 16) & 0x7f) * 1000;
+		pr_debug("sys_get_curr_temp %d\n", *temp);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzd,
+			     int trip, int *temp)
+{
+	struct zone_device *zonedev = tzd->devdata;
+	unsigned long thres_reg_value;
+	u32 mask, shift, eax, edx;
+	int ret;
+
+	if (trip >= MAX_NUMBER_OF_TRIPS)
+		return -EINVAL;
+
+	if (trip) {
+		mask = THERM_MASK_THRESHOLD1;
+		shift = THERM_SHIFT_THRESHOLD1;
+	} else {
+		mask = THERM_MASK_THRESHOLD0;
+		shift = THERM_SHIFT_THRESHOLD0;
+	}
+
+	ret = rdmsr_on_cpu(zonedev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			   &eax, &edx);
+	if (ret < 0)
+		return ret;
+
+	thres_reg_value = (eax & mask) >> shift;
+	if (thres_reg_value)
+		*temp = zonedev->tj_max - thres_reg_value * 1000;
+	else
+		*temp = THERMAL_TEMP_INVALID;
+	pr_debug("sys_get_trip_temp %d\n", *temp);
+
+	return 0;
+}
+
+static int
+sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp)
+{
+	struct zone_device *zonedev = tzd->devdata;
+	u32 l, h, mask, shift, intr;
+	int ret;
+
+	if (trip >= MAX_NUMBER_OF_TRIPS || temp >= zonedev->tj_max)
+		return -EINVAL;
+
+	ret = rdmsr_on_cpu(zonedev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			   &l, &h);
+	if (ret < 0)
+		return ret;
+
+	if (trip) {
+		mask = THERM_MASK_THRESHOLD1;
+		shift = THERM_SHIFT_THRESHOLD1;
+		intr = THERM_INT_THRESHOLD1_ENABLE;
+	} else {
+		mask = THERM_MASK_THRESHOLD0;
+		shift = THERM_SHIFT_THRESHOLD0;
+		intr = THERM_INT_THRESHOLD0_ENABLE;
+	}
+	l &= ~mask;
+	/*
+	* When users space sets a trip temperature == 0, which is indication
+	* that, it is no longer interested in receiving notifications.
+	*/
+	if (!temp) {
+		l &= ~intr;
+	} else {
+		l |= (zonedev->tj_max - temp)/1000 << shift;
+		l |= intr;
+	}
+
+	return wrmsr_on_cpu(zonedev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			l, h);
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *thermal, int trip,
+			     enum thermal_trip_type *type)
+{
+	*type = THERMAL_TRIP_PASSIVE;
+	return 0;
+}
+
+/* Thermal zone callback registry */
+static struct thermal_zone_device_ops tzone_ops = {
+	.get_temp = sys_get_curr_temp,
+	.get_trip_temp = sys_get_trip_temp,
+	.get_trip_type = sys_get_trip_type,
+	.set_trip_temp = sys_set_trip_temp,
+};
+
+static bool pkg_thermal_rate_control(void)
+{
+	return true;
+}
+
+/* Enable threshold interrupt on local package/cpu */
+static inline void enable_pkg_thres_interrupt(void)
+{
+	u8 thres_0, thres_1;
+	u32 l, h;
+
+	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+	/* only enable/disable if it had valid threshold value */
+	thres_0 = (l & THERM_MASK_THRESHOLD0) >> THERM_SHIFT_THRESHOLD0;
+	thres_1 = (l & THERM_MASK_THRESHOLD1) >> THERM_SHIFT_THRESHOLD1;
+	if (thres_0)
+		l |= THERM_INT_THRESHOLD0_ENABLE;
+	if (thres_1)
+		l |= THERM_INT_THRESHOLD1_ENABLE;
+	wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+}
+
+/* Disable threshold interrupt on local package/cpu */
+static inline void disable_pkg_thres_interrupt(void)
+{
+	u32 l, h;
+
+	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+
+	l &= ~(THERM_INT_THRESHOLD0_ENABLE | THERM_INT_THRESHOLD1_ENABLE);
+	wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+}
+
+static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
+{
+	struct thermal_zone_device *tzone = NULL;
+	int cpu = smp_processor_id();
+	struct zone_device *zonedev;
+	u64 msr_val, wr_val;
+
+	mutex_lock(&thermal_zone_mutex);
+	raw_spin_lock_irq(&pkg_temp_lock);
+	++pkg_work_cnt;
+
+	zonedev = pkg_temp_thermal_get_dev(cpu);
+	if (!zonedev) {
+		raw_spin_unlock_irq(&pkg_temp_lock);
+		mutex_unlock(&thermal_zone_mutex);
+		return;
+	}
+	zonedev->work_scheduled = false;
+
+	rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
+	wr_val = msr_val & ~(THERM_LOG_THRESHOLD0 | THERM_LOG_THRESHOLD1);
+	if (wr_val != msr_val) {
+		wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, wr_val);
+		tzone = zonedev->tzone;
+	}
+
+	enable_pkg_thres_interrupt();
+	raw_spin_unlock_irq(&pkg_temp_lock);
+
+	/*
+	 * If tzone is not NULL, then thermal_zone_mutex will prevent the
+	 * concurrent removal in the cpu offline callback.
+	 */
+	if (tzone)
+		thermal_zone_device_update(tzone, THERMAL_EVENT_UNSPECIFIED);
+
+	mutex_unlock(&thermal_zone_mutex);
+}
+
+static void pkg_thermal_schedule_work(int cpu, struct delayed_work *work)
+{
+	unsigned long ms = msecs_to_jiffies(notify_delay_ms);
+
+	schedule_delayed_work_on(cpu, work, ms);
+}
+
+static int pkg_thermal_notify(u64 msr_val)
+{
+	int cpu = smp_processor_id();
+	struct zone_device *zonedev;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pkg_temp_lock, flags);
+	++pkg_interrupt_cnt;
+
+	disable_pkg_thres_interrupt();
+
+	/* Work is per package, so scheduling it once is enough. */
+	zonedev = pkg_temp_thermal_get_dev(cpu);
+	if (zonedev && !zonedev->work_scheduled) {
+		zonedev->work_scheduled = true;
+		pkg_thermal_schedule_work(zonedev->cpu, &zonedev->work);
+	}
+
+	raw_spin_unlock_irqrestore(&pkg_temp_lock, flags);
+	return 0;
+}
+
+static int pkg_temp_thermal_device_add(unsigned int cpu)
+{
+	int id = topology_logical_die_id(cpu);
+	u32 tj_max, eax, ebx, ecx, edx;
+	struct zone_device *zonedev;
+	int thres_count, err;
+
+	if (id >= max_id)
+		return -ENOMEM;
+
+	cpuid(6, &eax, &ebx, &ecx, &edx);
+	thres_count = ebx & 0x07;
+	if (!thres_count)
+		return -ENODEV;
+
+	thres_count = clamp_val(thres_count, 0, MAX_NUMBER_OF_TRIPS);
+
+	err = get_tj_max(cpu, &tj_max);
+	if (err)
+		return err;
+
+	zonedev = kzalloc(sizeof(*zonedev), GFP_KERNEL);
+	if (!zonedev)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&zonedev->work, pkg_temp_thermal_threshold_work_fn);
+	zonedev->cpu = cpu;
+	zonedev->tj_max = tj_max;
+	zonedev->tzone = thermal_zone_device_register("x86_pkg_temp",
+			thres_count,
+			(thres_count == MAX_NUMBER_OF_TRIPS) ? 0x03 : 0x01,
+			zonedev, &tzone_ops, &pkg_temp_tz_params, 0, 0);
+	if (IS_ERR(zonedev->tzone)) {
+		err = PTR_ERR(zonedev->tzone);
+		kfree(zonedev);
+		return err;
+	}
+	err = thermal_zone_device_enable(zonedev->tzone);
+	if (err) {
+		thermal_zone_device_unregister(zonedev->tzone);
+		kfree(zonedev);
+		return err;
+	}
+	/* Store MSR value for package thermal interrupt, to restore at exit */
+	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, zonedev->msr_pkg_therm_low,
+	      zonedev->msr_pkg_therm_high);
+
+	cpumask_set_cpu(cpu, &zonedev->cpumask);
+	raw_spin_lock_irq(&pkg_temp_lock);
+	zones[id] = zonedev;
+	raw_spin_unlock_irq(&pkg_temp_lock);
+	return 0;
+}
+
+static int pkg_thermal_cpu_offline(unsigned int cpu)
+{
+	struct zone_device *zonedev = pkg_temp_thermal_get_dev(cpu);
+	bool lastcpu, was_target;
+	int target;
+
+	if (!zonedev)
+		return 0;
+
+	target = cpumask_any_but(&zonedev->cpumask, cpu);
+	cpumask_clear_cpu(cpu, &zonedev->cpumask);
+	lastcpu = target >= nr_cpu_ids;
+	/*
+	 * Remove the sysfs files, if this is the last cpu in the package
+	 * before doing further cleanups.
+	 */
+	if (lastcpu) {
+		struct thermal_zone_device *tzone = zonedev->tzone;
+
+		/*
+		 * We must protect against a work function calling
+		 * thermal_zone_update, after/while unregister. We null out
+		 * the pointer under the zone mutex, so the worker function
+		 * won't try to call.
+		 */
+		mutex_lock(&thermal_zone_mutex);
+		zonedev->tzone = NULL;
+		mutex_unlock(&thermal_zone_mutex);
+
+		thermal_zone_device_unregister(tzone);
+	}
+
+	/* Protect against work and interrupts */
+	raw_spin_lock_irq(&pkg_temp_lock);
+
+	/*
+	 * Check whether this cpu was the current target and store the new
+	 * one. When we drop the lock, then the interrupt notify function
+	 * will see the new target.
+	 */
+	was_target = zonedev->cpu == cpu;
+	zonedev->cpu = target;
+
+	/*
+	 * If this is the last CPU in the package remove the package
+	 * reference from the array and restore the interrupt MSR. When we
+	 * drop the lock neither the interrupt notify function nor the
+	 * worker will see the package anymore.
+	 */
+	if (lastcpu) {
+		zones[topology_logical_die_id(cpu)] = NULL;
+		/* After this point nothing touches the MSR anymore. */
+		wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+		      zonedev->msr_pkg_therm_low, zonedev->msr_pkg_therm_high);
+	}
+
+	/*
+	 * Check whether there is work scheduled and whether the work is
+	 * targeted at the outgoing CPU.
+	 */
+	if (zonedev->work_scheduled && was_target) {
+		/*
+		 * To cancel the work we need to drop the lock, otherwise
+		 * we might deadlock if the work needs to be flushed.
+		 */
+		raw_spin_unlock_irq(&pkg_temp_lock);
+		cancel_delayed_work_sync(&zonedev->work);
+		raw_spin_lock_irq(&pkg_temp_lock);
+		/*
+		 * If this is not the last cpu in the package and the work
+		 * did not run after we dropped the lock above, then we
+		 * need to reschedule the work, otherwise the interrupt
+		 * stays disabled forever.
+		 */
+		if (!lastcpu && zonedev->work_scheduled)
+			pkg_thermal_schedule_work(target, &zonedev->work);
+	}
+
+	raw_spin_unlock_irq(&pkg_temp_lock);
+
+	/* Final cleanup if this is the last cpu */
+	if (lastcpu)
+		kfree(zonedev);
+	return 0;
+}
+
+static int pkg_thermal_cpu_online(unsigned int cpu)
+{
+	struct zone_device *zonedev = pkg_temp_thermal_get_dev(cpu);
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	/* Paranoia check */
+	if (!cpu_has(c, X86_FEATURE_DTHERM) || !cpu_has(c, X86_FEATURE_PTS))
+		return -ENODEV;
+
+	/* If the package exists, nothing to do */
+	if (zonedev) {
+		cpumask_set_cpu(cpu, &zonedev->cpumask);
+		return 0;
+	}
+	return pkg_temp_thermal_device_add(cpu);
+}
+
+static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = {
+	X86_MATCH_VENDOR_FEATURE(INTEL, X86_FEATURE_PTS, NULL),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);
+
+static int __init pkg_temp_thermal_init(void)
+{
+	int ret;
+
+	if (!x86_match_cpu(pkg_temp_thermal_ids))
+		return -ENODEV;
+
+	max_id = topology_max_packages() * topology_max_die_per_package();
+	zones = kcalloc(max_id, sizeof(struct zone_device *),
+			   GFP_KERNEL);
+	if (!zones)
+		return -ENOMEM;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "thermal/x86_pkg:online",
+				pkg_thermal_cpu_online,	pkg_thermal_cpu_offline);
+	if (ret < 0)
+		goto err;
+
+	/* Store the state for module exit */
+	pkg_thermal_hp_state = ret;
+
+	platform_thermal_package_notify = pkg_thermal_notify;
+	platform_thermal_package_rate_control = pkg_thermal_rate_control;
+
+	 /* Don't care if it fails */
+	pkg_temp_debugfs_init();
+	return 0;
+
+err:
+	kfree(zones);
+	return ret;
+}
+module_init(pkg_temp_thermal_init)
+
+static void __exit pkg_temp_thermal_exit(void)
+{
+	platform_thermal_package_notify = NULL;
+	platform_thermal_package_rate_control = NULL;
+
+	cpuhp_remove_state(pkg_thermal_hp_state);
+	debugfs_remove_recursive(debugfs);
+	kfree(zones);
+}
+module_exit(pkg_temp_thermal_exit)
+
+MODULE_DESCRIPTION("X86 PKG TEMP Thermal Driver");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
new file mode 100644
index 000000000..22c9bcb89
--- /dev/null
+++ b/drivers/thermal/k3_bandgap.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI Bandgap temperature sensor driver for K3 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+
+#include "thermal_hwmon.h"
+
+#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
+#define K3_VTM_TMPSENS0_CTRL_OFFSET	0x80
+#define K3_VTM_REGS_PER_TS			0x10
+#define K3_VTM_TS_STAT_DTEMP_MASK	0x3ff
+#define K3_VTM_TMPSENS_CTRL_CBIASSEL	BIT(0)
+#define K3_VTM_TMPSENS_CTRL_SOC		BIT(5)
+#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
+#define K3_VTM_TMPSENS_CTRL_CLKON_REQ	BIT(7)
+
+#define K3_VTM_ADC_BEGIN_VAL		540
+#define K3_VTM_ADC_END_VAL		944
+
+static const int k3_adc_to_temp[] = {
+	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
+	-37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
+	-33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
+	-30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
+	-26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
+	-22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
+	-18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
+	-15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
+	-11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
+	-7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
+	-2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
+	1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
+	7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
+	11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
+	15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
+	19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
+	24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
+	28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
+	32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
+	36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
+	40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
+	45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
+	49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
+	53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
+	57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
+	61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
+	65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
+	69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
+	73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
+	77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
+	81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
+	85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
+	89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
+	93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
+	98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
+	101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
+	105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
+	109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
+	112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
+	116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
+	119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
+	123400, 123800, 124200, 124600, 124900, 125000,
+};
+
+struct k3_bandgap {
+	void __iomem *base;
+	const struct k3_bandgap_data *conf;
+};
+
+/* common data structures */
+struct k3_thermal_data {
+	struct thermal_zone_device *tzd;
+	struct k3_bandgap *bgp;
+	int sensor_id;
+	u32 ctrl_offset;
+	u32 stat_offset;
+};
+
+static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
+				       unsigned int s2)
+{
+	int d01 = abs(s0 - s1);
+	int d02 = abs(s0 - s2);
+	int d12 = abs(s1 - s2);
+
+	if (d01 <= d02 && d01 <= d12)
+		return (s0 + s1) / 2;
+
+	if (d02 <= d01 && d02 <= d12)
+		return (s0 + s2) / 2;
+
+	return (s1 + s2) / 2;
+}
+
+static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
+			    int *temp)
+{
+	struct k3_bandgap *bgp;
+	unsigned int dtemp, s0, s1, s2;
+
+	bgp = devdata->bgp;
+
+	/*
+	 * Errata is applicable for am654 pg 1.0 silicon. There
+	 * is a variation of the order for 8-10 degree centigrade.
+	 * Work around that by getting the average of two closest
+	 * readings out of three readings everytime we want to
+	 * report temperatures.
+	 *
+	 * Errata workaround.
+	 */
+	s0 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s1 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s2 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	dtemp = vtm_get_best_value(s0, s1, s2);
+
+	if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
+		return -EINVAL;
+
+	*temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
+
+	return 0;
+}
+
+static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct k3_thermal_data *data = tz->devdata;
+	int ret = 0;
+
+	ret = k3_bgp_read_temp(data, temp);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static const struct thermal_zone_device_ops k3_of_thermal_ops = {
+	.get_temp = k3_thermal_get_temp,
+};
+
+static const struct of_device_id of_k3_bandgap_match[];
+
+static int k3_bandgap_probe(struct platform_device *pdev)
+{
+	int ret = 0, cnt, val, id;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct k3_bandgap *bgp;
+	struct k3_thermal_data *data;
+
+	if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
+						K3_VTM_ADC_BEGIN_VAL))
+		return -EINVAL;
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bgp->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->base))
+		return PTR_ERR(bgp->base);
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
+	/* Get the sensor count in the VTM */
+	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
+	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
+	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
+
+	data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	/* Register the thermal sensors */
+	for (id = 0; id < cnt; id++) {
+		data[id].sensor_id = id;
+		data[id].bgp = bgp;
+		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
+					id * K3_VTM_REGS_PER_TS;
+		data[id].stat_offset = data[id].ctrl_offset + 0x8;
+
+		val = readl(data[id].bgp->base + data[id].ctrl_offset);
+		val |= (K3_VTM_TMPSENS_CTRL_SOC |
+			K3_VTM_TMPSENS_CTRL_CLRZ |
+			K3_VTM_TMPSENS_CTRL_CLKON_REQ);
+		val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
+		writel(val, data[id].bgp->base + data[id].ctrl_offset);
+
+		data[id].tzd =
+		devm_thermal_of_zone_register(dev, id,
+					      &data[id],
+					      &k3_of_thermal_ops);
+		if (IS_ERR(data[id].tzd)) {
+			dev_err(dev, "thermal zone device is NULL\n");
+			ret = PTR_ERR(data[id].tzd);
+			goto err_alloc;
+		}
+
+		if (devm_thermal_add_hwmon_sysfs(data[id].tzd))
+			dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
+	}
+
+	platform_set_drvdata(pdev, bgp);
+
+	return 0;
+
+err_alloc:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int k3_bandgap_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id of_k3_bandgap_match[] = {
+	{
+		.compatible = "ti,am654-vtm",
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
+
+static struct platform_driver k3_bandgap_sensor_driver = {
+	.probe = k3_bandgap_probe,
+	.remove = k3_bandgap_remove,
+	.driver = {
+		.name = "k3-soc-thermal",
+		.of_match_table	= of_k3_bandgap_match,
+	},
+};
+
+module_platform_driver(k3_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
new file mode 100644
index 000000000..c073b1023
--- /dev/null
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI Bandgap temperature sensor driver for J72XX SoC Family
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/math.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/thermal.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
+#define K3_VTM_TMPSENS0_CTRL_OFFSET		0x300
+#define K3_VTM_MISC_CTRL_OFFSET			0xc
+#define K3_VTM_TMPSENS_STAT_OFFSET		0x8
+#define K3_VTM_ANYMAXT_OUTRG_ALERT_EN		0x1
+#define K3_VTM_MISC_CTRL2_OFFSET		0x10
+#define K3_VTM_TS_STAT_DTEMP_MASK		0x3ff
+#define K3_VTM_MAX_NUM_TS			8
+#define K3_VTM_TMPSENS_CTRL_SOC			BIT(5)
+#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
+#define K3_VTM_TMPSENS_CTRL_CLKON_REQ		BIT(7)
+#define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN	BIT(11)
+
+#define K3_VTM_CORRECTION_TEMP_CNT		3
+
+#define MINUS40CREF				5
+#define PLUS30CREF				253
+#define PLUS125CREF				730
+#define PLUS150CREF				940
+
+#define TABLE_SIZE				1024
+#define MAX_TEMP				123000
+#define COOL_DOWN_TEMP				105000
+
+#define FACTORS_REDUCTION			13
+static int *derived_table;
+
+static int compute_value(int index, const s64 *factors, int nr_factors,
+			 int reduction)
+{
+	s64 value = 0;
+	int i;
+
+	for (i = 0; i < nr_factors; i++)
+		value += factors[i] * int_pow(index, i);
+
+	return (int)div64_s64(value, int_pow(10, reduction));
+}
+
+static void init_table(int factors_size, int *table, const s64 *factors)
+{
+	int i;
+
+	for (i = 0; i < TABLE_SIZE; i++)
+		table[i] = compute_value(i, factors, factors_size,
+					 FACTORS_REDUCTION);
+}
+
+/**
+ * struct err_values - structure containing error/reference values
+ * @refs: reference error values for -40C, 30C, 125C & 150C
+ * @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse
+ */
+struct err_values {
+	int refs[4];
+	int errs[4];
+};
+
+static void create_table_segments(struct err_values *err_vals, int seg,
+				  int *ref_table)
+{
+	int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2;
+
+	if (seg == 0)
+		idx1 = 0;
+	else
+		idx1 = err_vals->refs[seg];
+
+	idx2 = err_vals->refs[seg + 1];
+	err1 = err_vals->errs[seg];
+	err2 = err_vals->errs[seg + 1];
+	ref1 = err_vals->refs[seg];
+	ref2 = err_vals->refs[seg + 1];
+
+	/*
+	 * Calculate the slope with adc values read from the register
+	 * as the y-axis param and err in adc value as x-axis param
+	 */
+	num = ref2 - ref1;
+	den = err2 - err1;
+	if (den)
+		m = num / den;
+	c = ref2 - m * err2;
+
+	/*
+	 * Take care of divide by zero error if error values are same
+	 * Or when the slope is 0
+	 */
+	if (den != 0 && m != 0) {
+		for (i = idx1; i <= idx2; i++) {
+			err = (i - c) / m;
+			if (((i + err) < 0) || ((i + err) >= TABLE_SIZE))
+				continue;
+			derived_table[i] = ref_table[i + err];
+		}
+	} else { /* Constant error take care of divide by zero */
+		for (i = idx1; i <= idx2; i++) {
+			if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE))
+				continue;
+			derived_table[i] = ref_table[i + err1];
+		}
+	}
+}
+
+static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
+{
+	int inc, i, seg;
+
+	/*
+	 * Fill up the lookup table under 3 segments
+	 * region -40C to +30C
+	 * region +30C to +125C
+	 * region +125C to +150C
+	 */
+	for (seg = 0; seg < 3; seg++)
+		create_table_segments(err_vals, seg, ref_table);
+
+	/* Get to the first valid temperature */
+	i = 0;
+	while (!derived_table[i])
+		i++;
+
+	/*
+	 * Get to the last zero index and back fill the temperature for
+	 * sake of continuity
+	 */
+	if (i) {
+		/* 300 milli celsius steps */
+		while (i--)
+			derived_table[i] = derived_table[i + 1] - 300;
+	}
+
+	/*
+	 * Fill the last trailing 0s which are unfilled with increments of
+	 * 100 milli celsius till 1023 code
+	 */
+	i = TABLE_SIZE - 1;
+	while (!derived_table[i])
+		i--;
+
+	i++;
+	inc = 1;
+	while (i < TABLE_SIZE) {
+		derived_table[i] = derived_table[i - 1] + inc * 100;
+		i++;
+	}
+
+	return 0;
+}
+
+struct k3_thermal_data;
+
+struct k3_j72xx_bandgap {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *cfg2_base;
+	void __iomem *fuse_base;
+	struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
+};
+
+/* common data structures */
+struct k3_thermal_data {
+	struct k3_j72xx_bandgap *bgp;
+	u32 ctrl_offset;
+	u32 stat_offset;
+};
+
+static int two_cmp(int tmp, int mask)
+{
+	tmp = ~(tmp);
+	tmp &= mask;
+	tmp += 1;
+
+	/* Return negative value */
+	return (0 - tmp);
+}
+
+static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
+				       unsigned int s2)
+{
+	int d01 = abs(s0 - s1);
+	int d02 = abs(s0 - s2);
+	int d12 = abs(s1 - s2);
+
+	if (d01 <= d02 && d01 <= d12)
+		return (s0 + s1) / 2;
+
+	if (d02 <= d01 && d02 <= d12)
+		return (s0 + s2) / 2;
+
+	return (s1 + s2) / 2;
+}
+
+static inline int k3_bgp_read_temp(struct k3_thermal_data *devdata,
+				   int *temp)
+{
+	struct k3_j72xx_bandgap *bgp;
+	unsigned int dtemp, s0, s1, s2;
+
+	bgp = devdata->bgp;
+	/*
+	 * Errata is applicable for am654 pg 1.0 silicon/J7ES. There
+	 * is a variation of the order for certain degree centigrade on AM654.
+	 * Work around that by getting the average of two closest
+	 * readings out of three readings everytime we want to
+	 * report temperatures.
+	 *
+	 * Errata workaround.
+	 */
+	s0 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s1 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s2 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	dtemp = vtm_get_best_value(s0, s1, s2);
+
+	if (dtemp < 0 || dtemp >= TABLE_SIZE)
+		return -EINVAL;
+
+	*temp = derived_table[dtemp];
+
+	return 0;
+}
+
+/* Get temperature callback function for thermal zone */
+static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct k3_thermal_data *data = tz->devdata;
+	int ret = 0;
+
+	ret = k3_bgp_read_temp(data, temp);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static const struct thermal_zone_device_ops k3_of_thermal_ops = {
+	.get_temp = k3_thermal_get_temp,
+};
+
+static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
+{
+	int low = 0, high = TABLE_SIZE - 1, mid;
+
+	if (temp > 160000 || temp < -50000)
+		return -EINVAL;
+
+	/* Binary search to find the adc code */
+	while (low < (high - 1)) {
+		mid = (low + high) / 2;
+		if (temp <= derived_table[mid])
+			high = mid;
+		else
+			low = mid;
+	}
+
+	return mid;
+}
+
+static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
+			     struct k3_j72xx_bandgap *bgp)
+{
+	int i, tmp, pow;
+	int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
+		{ 0x0, 0x8, 0x4 },
+		{ 0x0, 0x8, 0x4 },
+		{ 0x0, -1,  0x4 },
+		{ 0x0, 0xC, -1 },
+		{ 0x0, 0xc, 0x8 }
+	};
+	int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = {
+		{ 0x3f, 0x1fe000, 0x1ff },
+		{ 0xfc0, 0x1fe000, 0x3fe00 },
+		{ 0x3f000, 0x7f800000, 0x7fc0000 },
+		{ 0xfc0000, 0x1fe0, 0x1f800000 },
+		{ 0x3f000000, 0x1fe000, 0x1ff0 }
+	};
+
+	for (i = 0; i < 3; i++) {
+		/* Extract the offset value using bit-mask */
+		if (ct_offsets[id][i] == -1 && i == 1) {
+			/* 25C offset Case of Sensor 2 split between 2 regs */
+			tmp = (readl(bgp->fuse_base + 0x8) & 0xE0000000) >> (29);
+			tmp |= ((readl(bgp->fuse_base + 0xC) & 0x1F) << 3);
+			pow = tmp & 0x80;
+		} else if (ct_offsets[id][i] == -1 && i == 2) {
+			/* 125C Case of Sensor 3 split between 2 regs */
+			tmp = (readl(bgp->fuse_base + 0x4) & 0xF8000000) >> (27);
+			tmp |= ((readl(bgp->fuse_base + 0x8) & 0xF) << 5);
+			pow = tmp & 0x100;
+		} else {
+			tmp = readl(bgp->fuse_base + ct_offsets[id][i]);
+			tmp &= ct_bm[id][i];
+			tmp = tmp >> __ffs(ct_bm[id][i]);
+
+			/* Obtain the sign bit pow*/
+			pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]);
+			pow += 1;
+			pow /= 2;
+		}
+
+		/* Check for negative value */
+		if (tmp & pow) {
+			/* 2's complement value */
+			tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i]));
+		}
+		err[i] = tmp;
+	}
+
+	/* Err value for 150C is set to 0 */
+	err[i] = 0;
+}
+
+static void print_look_up_table(struct device *dev, int *ref_table)
+{
+	int i;
+
+	dev_dbg(dev, "The contents of derived array\n");
+	dev_dbg(dev, "Code   Temperature\n");
+	for (i = 0; i < TABLE_SIZE; i++)
+		dev_dbg(dev, "%d       %d %d\n", i, derived_table[i], ref_table[i]);
+}
+
+struct k3_j72xx_bandgap_data {
+	unsigned int has_errata_i2128;
+};
+
+static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
+{
+	int ret = 0, cnt, val, id;
+	int high_max, low_temp;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct k3_j72xx_bandgap *bgp;
+	struct k3_thermal_data *data;
+	int workaround_needed = 0;
+	const struct k3_j72xx_bandgap_data *driver_data;
+	struct thermal_zone_device *ti_thermal;
+	int *ref_table;
+	struct err_values err_vals;
+
+	const s64 golden_factors[] = {
+		-490019999999999936,
+		3251200000000000,
+		-1705800000000,
+		603730000,
+		-92627,
+	};
+
+	const s64 pvt_wa_factors[] = {
+		-415230000000000000,
+		3126600000000000,
+		-1157800000000,
+	};
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp)
+		return -ENOMEM;
+
+	bgp->dev = dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bgp->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->base))
+		return PTR_ERR(bgp->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	bgp->cfg2_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->cfg2_base))
+		return PTR_ERR(bgp->cfg2_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	bgp->fuse_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->fuse_base))
+		return PTR_ERR(bgp->fuse_base);
+
+	driver_data = of_device_get_match_data(dev);
+	if (driver_data)
+		workaround_needed = driver_data->has_errata_i2128;
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
+	/* Get the sensor count in the VTM */
+	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
+	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
+	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
+
+	data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL);
+	if (!ref_table) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE,
+				     GFP_KERNEL);
+	if (!derived_table) {
+		ret = -ENOMEM;
+		goto err_free_ref_table;
+	}
+
+	/* Workaround not needed if bit30/bit31 is set even for J721e */
+	if (workaround_needed && (readl(bgp->fuse_base + 0x0) & 0xc0000000) == 0xc0000000)
+		workaround_needed = false;
+
+	dev_dbg(bgp->dev, "Work around %sneeded\n",
+		workaround_needed ? "" : "not ");
+
+	if (!workaround_needed)
+		init_table(5, ref_table, golden_factors);
+	else
+		init_table(3, ref_table, pvt_wa_factors);
+
+	/* Register the thermal sensors */
+	for (id = 0; id < cnt; id++) {
+		data[id].bgp = bgp;
+		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
+		data[id].stat_offset = data[id].ctrl_offset +
+					K3_VTM_TMPSENS_STAT_OFFSET;
+
+		if (workaround_needed) {
+			/* ref adc values for -40C, 30C & 125C respectively */
+			err_vals.refs[0] = MINUS40CREF;
+			err_vals.refs[1] = PLUS30CREF;
+			err_vals.refs[2] = PLUS125CREF;
+			err_vals.refs[3] = PLUS150CREF;
+			get_efuse_values(id, &data[id], err_vals.errs, bgp);
+		}
+
+		if (id == 0 && workaround_needed)
+			prep_lookup_table(&err_vals, ref_table);
+		else if (id == 0 && !workaround_needed)
+			memcpy(derived_table, ref_table, TABLE_SIZE * 4);
+
+		val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset);
+		val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
+			K3_VTM_TMPSENS_CTRL_SOC |
+			K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
+		writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
+
+		bgp->ts_data[id] = &data[id];
+		ti_thermal = devm_thermal_of_zone_register(bgp->dev, id, &data[id],
+							   &k3_of_thermal_ops);
+		if (IS_ERR(ti_thermal)) {
+			dev_err(bgp->dev, "thermal zone device is NULL\n");
+			ret = PTR_ERR(ti_thermal);
+			goto err_free_ref_table;
+		}
+	}
+
+	/*
+	 * Program TSHUT thresholds
+	 * Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
+	 * Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN  bit
+	 *         This is already taken care as per of init
+	 * Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN  bit
+	 */
+	high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
+	low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
+
+	writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base +
+	       K3_VTM_MISC_CTRL2_OFFSET);
+	mdelay(100);
+	writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
+	       K3_VTM_MISC_CTRL_OFFSET);
+
+	platform_set_drvdata(pdev, bgp);
+
+	print_look_up_table(dev, ref_table);
+	/*
+	 * Now that the derived_table has the appropriate look up values
+	 * Free up the ref_table
+	 */
+	kfree(ref_table);
+
+	return 0;
+
+err_free_ref_table:
+	kfree(ref_table);
+
+err_alloc:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
+	.has_errata_i2128 = 1,
+};
+
+static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
+	.has_errata_i2128 = 0,
+};
+
+static const struct of_device_id of_k3_j72xx_bandgap_match[] = {
+	{
+		.compatible = "ti,j721e-vtm",
+		.data = &k3_j72xx_bandgap_j721e_data,
+	},
+	{
+		.compatible = "ti,j7200-vtm",
+		.data = &k3_j72xx_bandgap_j7200_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_k3_j72xx_bandgap_match);
+
+static struct platform_driver k3_j72xx_bandgap_sensor_driver = {
+	.probe = k3_j72xx_bandgap_probe,
+	.remove = k3_j72xx_bandgap_remove,
+	.driver = {
+		.name = "k3-j72xx-soc-thermal",
+		.of_match_table	= of_k3_j72xx_bandgap_match,
+	},
+};
+
+module_platform_driver(k3_j72xx_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c
new file mode 100644
index 000000000..d35e5313b
--- /dev/null
+++ b/drivers/thermal/khadas_mcu_fan.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Khadas MCU Controlled FAN driver
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/khadas-mcu.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+#define MAX_LEVEL 3
+
+struct khadas_mcu_fan_ctx {
+	struct khadas_mcu *mcu;
+	unsigned int level;
+	struct thermal_cooling_device *cdev;
+};
+
+static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
+				    unsigned int level)
+{
+	int ret;
+
+	ret = regmap_write(ctx->mcu->regmap, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
+			   level);
+	if (ret)
+		return ret;
+
+	ctx->level = level;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
+					unsigned long *state)
+{
+	*state = MAX_LEVEL;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev,
+					unsigned long *state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	*state = ctx->level;
+
+	return 0;
+}
+
+static int
+khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
+			     unsigned long state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	if (state > MAX_LEVEL)
+		return -EINVAL;
+
+	if (state == ctx->level)
+		return 0;
+
+	return khadas_mcu_fan_set_level(ctx, state);
+}
+
+static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
+	.get_max_state = khadas_mcu_fan_get_max_state,
+	.get_cur_state = khadas_mcu_fan_get_cur_state,
+	.set_cur_state = khadas_mcu_fan_set_cur_state,
+};
+
+static int khadas_mcu_fan_probe(struct platform_device *pdev)
+{
+	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
+	struct thermal_cooling_device *cdev;
+	struct device *dev = &pdev->dev;
+	struct khadas_mcu_fan_ctx *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	ctx->mcu = mcu;
+	platform_set_drvdata(pdev, ctx);
+
+	cdev = devm_thermal_of_cooling_device_register(dev->parent,
+			dev->parent->of_node, "khadas-mcu-fan", ctx,
+			&khadas_mcu_fan_cooling_ops);
+	if (IS_ERR(cdev)) {
+		ret = PTR_ERR(cdev);
+		dev_err(dev, "Failed to register khadas-mcu-fan as cooling device: %d\n",
+			ret);
+		return ret;
+	}
+	ctx->cdev = cdev;
+
+	return 0;
+}
+
+static void khadas_mcu_fan_shutdown(struct platform_device *pdev)
+{
+	struct khadas_mcu_fan_ctx *ctx = platform_get_drvdata(pdev);
+
+	khadas_mcu_fan_set_level(ctx, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int khadas_mcu_fan_suspend(struct device *dev)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+	unsigned int level_save = ctx->level;
+	int ret;
+
+	ret = khadas_mcu_fan_set_level(ctx, 0);
+	if (ret)
+		return ret;
+
+	ctx->level = level_save;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_resume(struct device *dev)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+
+	return khadas_mcu_fan_set_level(ctx, ctx->level);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend,
+			 khadas_mcu_fan_resume);
+
+static const struct platform_device_id khadas_mcu_fan_id_table[] = {
+	{ .name = "khadas-mcu-fan-ctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table);
+
+static struct platform_driver khadas_mcu_fan_driver = {
+	.probe		= khadas_mcu_fan_probe,
+	.shutdown	= khadas_mcu_fan_shutdown,
+	.driver	= {
+		.name		= "khadas-mcu-fan-ctrl",
+		.pm		= &khadas_mcu_fan_pm,
+	},
+	.id_table	= khadas_mcu_fan_id_table,
+};
+
+module_platform_driver(khadas_mcu_fan_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Khadas MCU FAN driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
new file mode 100644
index 000000000..7fb6e476c
--- /dev/null
+++ b/drivers/thermal/kirkwood_thermal.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Kirkwood thermal sensor driver
+ *
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define KIRKWOOD_THERMAL_VALID_OFFSET	9
+#define KIRKWOOD_THERMAL_VALID_MASK	0x1
+#define KIRKWOOD_THERMAL_TEMP_OFFSET	10
+#define KIRKWOOD_THERMAL_TEMP_MASK	0x1FF
+
+/* Kirkwood Thermal Sensor Dev Structure */
+struct kirkwood_thermal_priv {
+	void __iomem *sensor;
+};
+
+static int kirkwood_get_temp(struct thermal_zone_device *thermal,
+			  int *temp)
+{
+	unsigned long reg;
+	struct kirkwood_thermal_priv *priv = thermal->devdata;
+
+	reg = readl_relaxed(priv->sensor);
+
+	/* Valid check */
+	if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
+	    KIRKWOOD_THERMAL_VALID_MASK)) {
+		dev_err(&thermal->device,
+			"Temperature sensor reading not valid\n");
+		return -EIO;
+	}
+
+	/*
+	 * Calculate temperature. According to Marvell internal
+	 * documentation the formula for this is:
+	 * Celsius = (322-reg)/1.3625
+	 */
+	reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
+		KIRKWOOD_THERMAL_TEMP_MASK;
+	*temp = ((3220000000UL - (10000000UL * reg)) / 13625);
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+	.get_temp = kirkwood_get_temp,
+};
+
+static const struct of_device_id kirkwood_thermal_id_table[] = {
+	{ .compatible = "marvell,kirkwood-thermal" },
+	{}
+};
+
+static int kirkwood_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal = NULL;
+	struct kirkwood_thermal_priv *priv;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->sensor))
+		return PTR_ERR(priv->sensor);
+
+	thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
+					       priv, &ops, NULL, 0, 0);
+	if (IS_ERR(thermal)) {
+		dev_err(&pdev->dev,
+			"Failed to register thermal zone device\n");
+		return PTR_ERR(thermal);
+	}
+	ret = thermal_zone_device_enable(thermal);
+	if (ret) {
+		thermal_zone_device_unregister(thermal);
+		dev_err(&pdev->dev, "Failed to enable thermal zone device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, thermal);
+
+	return 0;
+}
+
+static int kirkwood_thermal_exit(struct platform_device *pdev)
+{
+	struct thermal_zone_device *kirkwood_thermal =
+		platform_get_drvdata(pdev);
+
+	thermal_zone_device_unregister(kirkwood_thermal);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table);
+
+static struct platform_driver kirkwood_thermal_driver = {
+	.probe = kirkwood_thermal_probe,
+	.remove = kirkwood_thermal_exit,
+	.driver = {
+		.name = "kirkwood_thermal",
+		.of_match_table = kirkwood_thermal_id_table,
+	},
+};
+
+module_platform_driver(kirkwood_thermal_driver);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
+MODULE_DESCRIPTION("kirkwood thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
new file mode 100644
index 000000000..6451a55eb
--- /dev/null
+++ b/drivers/thermal/max77620_thermal.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Junction temperature thermal driver for Maxim Max77620.
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *	   Mallikarjun Kasoju <mkasoju@nvidia.com>
+ */
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77620.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define MAX77620_NORMAL_OPERATING_TEMP	100000
+#define MAX77620_TJALARM1_TEMP		120000
+#define MAX77620_TJALARM2_TEMP		140000
+
+struct max77620_therm_info {
+	struct device			*dev;
+	struct regmap			*rmap;
+	struct thermal_zone_device	*tz_device;
+	int				irq_tjalarm1;
+	int				irq_tjalarm2;
+};
+
+/**
+ * max77620_thermal_read_temp: Read PMIC die temperatue.
+ * @data:	Device specific data.
+ * @temp:	Temperature in millidegrees Celsius
+ *
+ * The actual temperature of PMIC die is not available from PMIC.
+ * PMIC only tells the status if it has crossed or not the threshold level
+ * of 120degC or 140degC.
+ * If threshold has not been crossed then assume die temperature as 100degC
+ * else 120degC or 140deG based on the PMIC die temp threshold status.
+ *
+ * Return 0 on success otherwise error number to show reason of failure.
+ */
+
+static int max77620_thermal_read_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct max77620_therm_info *mtherm = tz->devdata;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val);
+	if (ret < 0) {
+		dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret);
+		return ret;
+	}
+
+	if (val & MAX77620_IRQ_TJALRM2_MASK)
+		*temp = MAX77620_TJALARM2_TEMP;
+	else if (val & MAX77620_IRQ_TJALRM1_MASK)
+		*temp = MAX77620_TJALARM1_TEMP;
+	else
+		*temp = MAX77620_NORMAL_OPERATING_TEMP;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops max77620_thermal_ops = {
+	.get_temp = max77620_thermal_read_temp,
+};
+
+static irqreturn_t max77620_thermal_irq(int irq, void *data)
+{
+	struct max77620_therm_info *mtherm = data;
+
+	if (irq == mtherm->irq_tjalarm1)
+		dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n");
+	else if (irq == mtherm->irq_tjalarm2)
+		dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n");
+
+	thermal_zone_device_update(mtherm->tz_device,
+				   THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static int max77620_thermal_probe(struct platform_device *pdev)
+{
+	struct max77620_therm_info *mtherm;
+	int ret;
+
+	mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL);
+	if (!mtherm)
+		return -ENOMEM;
+
+	mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0);
+	mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1);
+	if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) {
+		dev_err(&pdev->dev, "Alarm irq number not available\n");
+		return -EINVAL;
+	}
+
+	mtherm->dev = &pdev->dev;
+	mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!mtherm->rmap) {
+		dev_err(&pdev->dev, "Failed to get parent regmap\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * The reference taken to the parent's node which will be balanced on
+	 * reprobe or on platform-device release.
+	 */
+	device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
+	mtherm->tz_device = devm_thermal_of_zone_register(&pdev->dev, 0,
+				mtherm, &max77620_thermal_ops);
+	if (IS_ERR(mtherm->tz_device)) {
+		ret = PTR_ERR(mtherm->tz_device);
+		dev_err(&pdev->dev, "Failed to register thermal zone: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL,
+					max77620_thermal_irq,
+					IRQF_ONESHOT | IRQF_SHARED,
+					dev_name(&pdev->dev), mtherm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL,
+					max77620_thermal_irq,
+					IRQF_ONESHOT | IRQF_SHARED,
+					dev_name(&pdev->dev), mtherm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, mtherm);
+
+	return 0;
+}
+
+static struct platform_device_id max77620_thermal_devtype[] = {
+	{ .name = "max77620-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, max77620_thermal_devtype);
+
+static struct platform_driver max77620_thermal_driver = {
+	.driver = {
+		.name = "max77620-thermal",
+	},
+	.probe = max77620_thermal_probe,
+	.id_table = max77620_thermal_devtype,
+};
+
+module_platform_driver(max77620_thermal_driver);
+
+MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
new file mode 100644
index 000000000..8440692e3
--- /dev/null
+++ b/drivers/thermal/mtk_thermal.c
@@ -0,0 +1,1133 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Hanyi Wu <hanyi.wu@mediatek.com>
+ *         Sascha Hauer <s.hauer@pengutronix.de>
+ *         Dawei Chien <dawei.chien@mediatek.com>
+ *         Louis Yu <louis.yu@mediatek.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/thermal.h>
+#include <linux/reset.h>
+#include <linux/types.h>
+
+#include "thermal_hwmon.h"
+
+/* AUXADC Registers */
+#define AUXADC_CON1_SET_V	0x008
+#define AUXADC_CON1_CLR_V	0x00c
+#define AUXADC_CON2_V		0x010
+#define AUXADC_DATA(channel)	(0x14 + (channel) * 4)
+
+#define APMIXED_SYS_TS_CON1	0x604
+
+/* Thermal Controller Registers */
+#define TEMP_MONCTL0		0x000
+#define TEMP_MONCTL1		0x004
+#define TEMP_MONCTL2		0x008
+#define TEMP_MONIDET0		0x014
+#define TEMP_MONIDET1		0x018
+#define TEMP_MSRCTL0		0x038
+#define TEMP_MSRCTL1		0x03c
+#define TEMP_AHBPOLL		0x040
+#define TEMP_AHBTO		0x044
+#define TEMP_ADCPNP0		0x048
+#define TEMP_ADCPNP1		0x04c
+#define TEMP_ADCPNP2		0x050
+#define TEMP_ADCPNP3		0x0b4
+
+#define TEMP_ADCMUX		0x054
+#define TEMP_ADCEN		0x060
+#define TEMP_PNPMUXADDR		0x064
+#define TEMP_ADCMUXADDR		0x068
+#define TEMP_ADCENADDR		0x074
+#define TEMP_ADCVALIDADDR	0x078
+#define TEMP_ADCVOLTADDR	0x07c
+#define TEMP_RDCTRL		0x080
+#define TEMP_ADCVALIDMASK	0x084
+#define TEMP_ADCVOLTAGESHIFT	0x088
+#define TEMP_ADCWRITECTRL	0x08c
+#define TEMP_MSR0		0x090
+#define TEMP_MSR1		0x094
+#define TEMP_MSR2		0x098
+#define TEMP_MSR3		0x0B8
+
+#define TEMP_SPARE0		0x0f0
+
+#define TEMP_ADCPNP0_1          0x148
+#define TEMP_ADCPNP1_1          0x14c
+#define TEMP_ADCPNP2_1          0x150
+#define TEMP_MSR0_1             0x190
+#define TEMP_MSR1_1             0x194
+#define TEMP_MSR2_1             0x198
+#define TEMP_ADCPNP3_1          0x1b4
+#define TEMP_MSR3_1             0x1B8
+
+#define PTPCORESEL		0x400
+
+#define TEMP_MONCTL1_PERIOD_UNIT(x)	((x) & 0x3ff)
+
+#define TEMP_MONCTL2_FILTER_INTERVAL(x)	(((x) & 0x3ff) << 16)
+#define TEMP_MONCTL2_SENSOR_INTERVAL(x)	((x) & 0x3ff)
+
+#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)	(x)
+
+#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE		BIT(0)
+#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE		BIT(1)
+
+#define TEMP_ADCVALIDMASK_VALID_HIGH		BIT(5)
+#define TEMP_ADCVALIDMASK_VALID_POS(bit)	(bit)
+
+/* MT8173 thermal sensors */
+#define MT8173_TS1	0
+#define MT8173_TS2	1
+#define MT8173_TS3	2
+#define MT8173_TS4	3
+#define MT8173_TSABB	4
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT8173_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT8173 */
+#define MT8173_NUM_SENSORS		5
+
+/* The number of banks in the MT8173 */
+#define MT8173_NUM_ZONES		4
+
+/* The number of sensing points per bank */
+#define MT8173_NUM_SENSORS_PER_ZONE	4
+
+/* The number of controller in the MT8173 */
+#define MT8173_NUM_CONTROLLER		1
+
+/* The calibration coefficient of sensor  */
+#define MT8173_CALIBRATION	165
+
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
+ * MT8183 has 6 sensors and needs 6 VTS calibration data.
+ * MT8173 has 5 sensors and needs 5 VTS calibration data.
+ * MT2701 has 3 sensors and needs 3 VTS calibration data.
+ * MT2712 has 4 sensors and needs 4 VTS calibration data.
+ */
+#define CALIB_BUF0_VALID_V1		BIT(0)
+#define CALIB_BUF1_ADC_GE_V1(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_VTS_TS1_V1(x)	(((x) >> 17) & 0x1ff)
+#define CALIB_BUF0_VTS_TS2_V1(x)	(((x) >> 8) & 0x1ff)
+#define CALIB_BUF1_VTS_TS3_V1(x)	(((x) >> 0) & 0x1ff)
+#define CALIB_BUF2_VTS_TS4_V1(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF2_VTS_TS5_V1(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF2_VTS_TSABB_V1(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF0_DEGC_CALI_V1(x)	(((x) >> 1) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V1(x)	(((x) >> 26) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x)	(((x) >> 7) & 0x1)
+#define CALIB_BUF1_ID_V1(x)		(((x) >> 9) & 0x1)
+
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT7622.
+ */
+#define CALIB_BUF0_ADC_OE_V2(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_ADC_GE_V2(x)		(((x) >> 12) & 0x3ff)
+#define CALIB_BUF0_DEGC_CALI_V2(x)	(((x) >> 6) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V2(x)	(((x) >> 0) & 0x3f)
+#define CALIB_BUF1_VTS_TS1_V2(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF1_VTS_TS2_V2(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF1_VTS_TSABB_V2(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF1_VALID_V2(x)		(((x) >> 4) & 0x1)
+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x)	(((x) >> 3) & 0x1)
+
+enum {
+	VTS1,
+	VTS2,
+	VTS3,
+	VTS4,
+	VTS5,
+	VTSABB,
+	MAX_NUM_VTS,
+};
+
+enum mtk_thermal_version {
+	MTK_THERMAL_V1 = 1,
+	MTK_THERMAL_V2,
+};
+
+/* MT2701 thermal sensors */
+#define MT2701_TS1	0
+#define MT2701_TS2	1
+#define MT2701_TSABB	2
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT2701_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT2701 */
+#define MT2701_NUM_SENSORS	3
+
+/* The number of sensing points per bank */
+#define MT2701_NUM_SENSORS_PER_ZONE	3
+
+/* The number of controller in the MT2701 */
+#define MT2701_NUM_CONTROLLER		1
+
+/* The calibration coefficient of sensor  */
+#define MT2701_CALIBRATION	165
+
+/* MT2712 thermal sensors */
+#define MT2712_TS1	0
+#define MT2712_TS2	1
+#define MT2712_TS3	2
+#define MT2712_TS4	3
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT2712_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT2712 */
+#define MT2712_NUM_SENSORS	4
+
+/* The number of sensing points per bank */
+#define MT2712_NUM_SENSORS_PER_ZONE	4
+
+/* The number of controller in the MT2712 */
+#define MT2712_NUM_CONTROLLER		1
+
+/* The calibration coefficient of sensor  */
+#define MT2712_CALIBRATION	165
+
+#define MT7622_TEMP_AUXADC_CHANNEL	11
+#define MT7622_NUM_SENSORS		1
+#define MT7622_NUM_ZONES		1
+#define MT7622_NUM_SENSORS_PER_ZONE	1
+#define MT7622_TS1	0
+#define MT7622_NUM_CONTROLLER		1
+
+/* The maximum number of banks */
+#define MAX_NUM_ZONES		8
+
+/* The calibration coefficient of sensor  */
+#define MT7622_CALIBRATION	165
+
+/* MT8183 thermal sensors */
+#define MT8183_TS1	0
+#define MT8183_TS2	1
+#define MT8183_TS3	2
+#define MT8183_TS4	3
+#define MT8183_TS5	4
+#define MT8183_TSABB	5
+
+/* AUXADC channel  is used for the temperature sensors */
+#define MT8183_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT8183 */
+#define MT8183_NUM_SENSORS	6
+
+/* The number of banks in the MT8183 */
+#define MT8183_NUM_ZONES               1
+
+/* The number of sensing points per bank */
+#define MT8183_NUM_SENSORS_PER_ZONE	 6
+
+/* The number of controller in the MT8183 */
+#define MT8183_NUM_CONTROLLER		2
+
+/* The calibration coefficient of sensor  */
+#define MT8183_CALIBRATION	153
+
+struct mtk_thermal;
+
+struct thermal_bank_cfg {
+	unsigned int num_sensors;
+	const int *sensors;
+};
+
+struct mtk_thermal_bank {
+	struct mtk_thermal *mt;
+	int id;
+};
+
+struct mtk_thermal_data {
+	s32 num_banks;
+	s32 num_sensors;
+	s32 auxadc_channel;
+	const int *vts_index;
+	const int *sensor_mux_values;
+	const int *msr;
+	const int *adcpnp;
+	const int cali_val;
+	const int num_controller;
+	const int *controller_offset;
+	bool need_switch_bank;
+	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
+	enum mtk_thermal_version version;
+};
+
+struct mtk_thermal {
+	struct device *dev;
+	void __iomem *thermal_base;
+
+	struct clk *clk_peri_therm;
+	struct clk *clk_auxadc;
+	/* lock: for getting and putting banks */
+	struct mutex lock;
+
+	/* Calibration values */
+	s32 adc_ge;
+	s32 adc_oe;
+	s32 degc_cali;
+	s32 o_slope;
+	s32 o_slope_sign;
+	s32 vts[MAX_NUM_VTS];
+
+	const struct mtk_thermal_data *conf;
+	struct mtk_thermal_bank banks[MAX_NUM_ZONES];
+};
+
+/* MT8183 thermal sensor data */
+static const int mt8183_bank_data[MT8183_NUM_SENSORS] = {
+	MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB
+};
+
+static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1
+};
+
+static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1,
+	TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1
+};
+
+static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 };
+static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100};
+
+static const int mt8183_vts_index[MT8183_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB
+};
+
+/* MT8173 thermal sensor data */
+static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
+	{ MT8173_TS2, MT8173_TS3 },
+	{ MT8173_TS2, MT8173_TS4 },
+	{ MT8173_TS1, MT8173_TS2, MT8173_TSABB },
+	{ MT8173_TS2 },
+};
+
+static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
+};
+
+static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
+};
+
+static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, };
+
+static const int mt8173_vts_index[MT8173_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3, VTS4, VTSABB
+};
+
+/* MT2701 thermal sensor data */
+static const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
+	MT2701_TS1, MT2701_TS2, MT2701_TSABB
+};
+
+static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
+static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, };
+
+static const int mt2701_vts_index[MT2701_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3
+};
+
+/* MT2712 thermal sensor data */
+static const int mt2712_bank_data[MT2712_NUM_SENSORS] = {
+	MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4
+};
+
+static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
+};
+
+static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
+};
+
+static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
+static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, };
+
+static const int mt2712_vts_index[MT2712_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3, VTS4
+};
+
+/* MT7622 thermal sensor data */
+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
+static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
+static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
+
+/*
+ * The MT8173 thermal controller has four banks. Each bank can read up to
+ * four temperature sensors simultaneously. The MT8173 has a total of 5
+ * temperature sensors. We use each bank to measure a certain area of the
+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
+ * areas, hence is used in different banks.
+ *
+ * The thermal core only gets the maximum temperature of all banks, so
+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data, and this indeed needs the temperatures of the individual banks
+ * for making better decisions.
+ */
+static const struct mtk_thermal_data mt8173_thermal_data = {
+	.auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT8173_NUM_ZONES,
+	.num_sensors = MT8173_NUM_SENSORS,
+	.vts_index = mt8173_vts_index,
+	.cali_val = MT8173_CALIBRATION,
+	.num_controller = MT8173_NUM_CONTROLLER,
+	.controller_offset = mt8173_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 2,
+			.sensors = mt8173_bank_data[0],
+		}, {
+			.num_sensors = 2,
+			.sensors = mt8173_bank_data[1],
+		}, {
+			.num_sensors = 3,
+			.sensors = mt8173_bank_data[2],
+		}, {
+			.num_sensors = 1,
+			.sensors = mt8173_bank_data[3],
+		},
+	},
+	.msr = mt8173_msr,
+	.adcpnp = mt8173_adcpnp,
+	.sensor_mux_values = mt8173_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/*
+ * The MT2701 thermal controller has one bank, which can read up to
+ * three temperature sensors simultaneously. The MT2701 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt2701_thermal_data = {
+	.auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
+	.num_banks = 1,
+	.num_sensors = MT2701_NUM_SENSORS,
+	.vts_index = mt2701_vts_index,
+	.cali_val = MT2701_CALIBRATION,
+	.num_controller = MT2701_NUM_CONTROLLER,
+	.controller_offset = mt2701_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 3,
+			.sensors = mt2701_bank_data,
+		},
+	},
+	.msr = mt2701_msr,
+	.adcpnp = mt2701_adcpnp,
+	.sensor_mux_values = mt2701_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/*
+ * The MT2712 thermal controller has one bank, which can read up to
+ * four temperature sensors simultaneously. The MT2712 has a total of 4
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt2712_thermal_data = {
+	.auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL,
+	.num_banks = 1,
+	.num_sensors = MT2712_NUM_SENSORS,
+	.vts_index = mt2712_vts_index,
+	.cali_val = MT2712_CALIBRATION,
+	.num_controller = MT2712_NUM_CONTROLLER,
+	.controller_offset = mt2712_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 4,
+			.sensors = mt2712_bank_data,
+		},
+	},
+	.msr = mt2712_msr,
+	.adcpnp = mt2712_adcpnp,
+	.sensor_mux_values = mt2712_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/*
+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
+ * access.
+ */
+static const struct mtk_thermal_data mt7622_thermal_data = {
+	.auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT7622_NUM_ZONES,
+	.num_sensors = MT7622_NUM_SENSORS,
+	.vts_index = mt7622_vts_index,
+	.cali_val = MT7622_CALIBRATION,
+	.num_controller = MT7622_NUM_CONTROLLER,
+	.controller_offset = mt7622_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 1,
+			.sensors = mt7622_bank_data,
+		},
+	},
+	.msr = mt7622_msr,
+	.adcpnp = mt7622_adcpnp,
+	.sensor_mux_values = mt7622_mux_values,
+	.version = MTK_THERMAL_V2,
+};
+
+/*
+ * The MT8183 thermal controller has one bank for the current SW framework.
+ * The MT8183 has a total of 6 temperature sensors.
+ * There are two thermal controller to control the six sensor.
+ * The first one bind 2 sensor, and the other bind 4 sensors.
+ * The thermal core only gets the maximum temperature of all sensor, so
+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data, and this indeed needs the temperatures of the individual banks
+ * for making better decisions.
+ */
+static const struct mtk_thermal_data mt8183_thermal_data = {
+	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT8183_NUM_ZONES,
+	.num_sensors = MT8183_NUM_SENSORS,
+	.vts_index = mt8183_vts_index,
+	.cali_val = MT8183_CALIBRATION,
+	.num_controller = MT8183_NUM_CONTROLLER,
+	.controller_offset = mt8183_tc_offset,
+	.need_switch_bank = false,
+	.bank_data = {
+		{
+			.num_sensors = 6,
+			.sensors = mt8183_bank_data,
+		},
+	},
+
+	.msr = mt8183_msr,
+	.adcpnp = mt8183_adcpnp,
+	.sensor_mux_values = mt8183_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/**
+ * raw_to_mcelsius - convert a raw ADC value to mcelsius
+ * @mt:	The thermal controller
+ * @sensno:	sensor number
+ * @raw:	raw ADC value
+ *
+ * This converts the raw ADC value to mcelsius using the SoC specific
+ * calibration constants
+ */
+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+	s32 tmp;
+
+	raw &= 0xfff;
+
+	tmp = 203450520 << 3;
+	tmp /= mt->conf->cali_val + mt->o_slope;
+	tmp /= 10000 + mt->adc_ge;
+	tmp *= raw - mt->vts[sensno] - 3350;
+	tmp >>= 3;
+
+	return mt->degc_cali * 500 - tmp;
+}
+
+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+	s32 format_1;
+	s32 format_2;
+	s32 g_oe;
+	s32 g_gain;
+	s32 g_x_roomt;
+	s32 tmp;
+
+	if (raw == 0)
+		return 0;
+
+	raw &= 0xfff;
+	g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
+	g_oe = mt->adc_oe - 512;
+	format_1 = mt->vts[VTS2] + 3105 - g_oe;
+	format_2 = (mt->degc_cali * 10) >> 1;
+	g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
+
+	tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
+	tmp = tmp * 10 * 100 / 11;
+
+	if (mt->o_slope_sign == 0)
+		tmp = tmp / (165 - mt->o_slope);
+	else
+		tmp = tmp / (165 + mt->o_slope);
+
+	return (format_2 - tmp) * 100;
+}
+
+/**
+ * mtk_thermal_get_bank - get bank
+ * @bank:	The bank
+ *
+ * The bank registers are banked, we have to select a bank in the
+ * PTPCORESEL register to access it.
+ */
+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
+{
+	struct mtk_thermal *mt = bank->mt;
+	u32 val;
+
+	if (mt->conf->need_switch_bank) {
+		mutex_lock(&mt->lock);
+
+		val = readl(mt->thermal_base + PTPCORESEL);
+		val &= ~0xf;
+		val |= bank->id;
+		writel(val, mt->thermal_base + PTPCORESEL);
+	}
+}
+
+/**
+ * mtk_thermal_put_bank - release bank
+ * @bank:	The bank
+ *
+ * release a bank previously taken with mtk_thermal_get_bank,
+ */
+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
+{
+	struct mtk_thermal *mt = bank->mt;
+
+	if (mt->conf->need_switch_bank)
+		mutex_unlock(&mt->lock);
+}
+
+/**
+ * mtk_thermal_bank_temperature - get the temperature of a bank
+ * @bank:	The bank
+ *
+ * The temperature of a bank is considered the maximum temperature of
+ * the sensors associated to the bank.
+ */
+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
+{
+	struct mtk_thermal *mt = bank->mt;
+	const struct mtk_thermal_data *conf = mt->conf;
+	int i, temp = INT_MIN, max = INT_MIN;
+	u32 raw;
+
+	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
+		raw = readl(mt->thermal_base + conf->msr[i]);
+
+		if (mt->conf->version == MTK_THERMAL_V1) {
+			temp = raw_to_mcelsius_v1(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		} else {
+			temp = raw_to_mcelsius_v2(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		}
+
+		/*
+		 * The first read of a sensor often contains very high bogus
+		 * temperature value. Filter these out so that the system does
+		 * not immediately shut down.
+		 */
+		if (temp > 200000)
+			temp = 0;
+
+		if (temp > max)
+			max = temp;
+	}
+
+	return max;
+}
+
+static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
+{
+	struct mtk_thermal *mt = tz->devdata;
+	int i;
+	int tempmax = INT_MIN;
+
+	for (i = 0; i < mt->conf->num_banks; i++) {
+		struct mtk_thermal_bank *bank = &mt->banks[i];
+
+		mtk_thermal_get_bank(bank);
+
+		tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
+
+		mtk_thermal_put_bank(bank);
+	}
+
+	*temperature = tempmax;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops mtk_thermal_ops = {
+	.get_temp = mtk_read_temp,
+};
+
+static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
+				  u32 apmixed_phys_base, u32 auxadc_phys_base,
+				  int ctrl_id)
+{
+	struct mtk_thermal_bank *bank = &mt->banks[num];
+	const struct mtk_thermal_data *conf = mt->conf;
+	int i;
+
+	int offset = mt->conf->controller_offset[ctrl_id];
+	void __iomem *controller_base = mt->thermal_base + offset;
+
+	bank->id = num;
+	bank->mt = mt;
+
+	mtk_thermal_get_bank(bank);
+
+	/* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
+	writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1);
+
+	/*
+	 * filt interval is 1 * 46.540us = 46.54us,
+	 * sen interval is 429 * 46.540us = 19.96ms
+	 */
+	writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
+			TEMP_MONCTL2_SENSOR_INTERVAL(429),
+			controller_base + TEMP_MONCTL2);
+
+	/* poll is set to 10u */
+	writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
+	       controller_base + TEMP_AHBPOLL);
+
+	/* temperature sampling control, 1 sample */
+	writel(0x0, controller_base + TEMP_MSRCTL0);
+
+	/* exceed this polling time, IRQ would be inserted */
+	writel(0xffffffff, controller_base + TEMP_AHBTO);
+
+	/* number of interrupts per event, 1 is enough */
+	writel(0x0, controller_base + TEMP_MONIDET0);
+	writel(0x0, controller_base + TEMP_MONIDET1);
+
+	/*
+	 * The MT8173 thermal controller does not have its own ADC. Instead it
+	 * uses AHB bus accesses to control the AUXADC. To do this the thermal
+	 * controller has to be programmed with the physical addresses of the
+	 * AUXADC registers and with the various bit positions in the AUXADC.
+	 * Also the thermal controller controls a mux in the APMIXEDSYS register
+	 * space.
+	 */
+
+	/*
+	 * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
+	 * automatically by hw
+	 */
+	writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX);
+
+	/* AHB address for auxadc mux selection */
+	writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
+	       controller_base + TEMP_ADCMUXADDR);
+
+	if (mt->conf->version == MTK_THERMAL_V1) {
+		/* AHB address for pnp sensor mux selection */
+		writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
+		       controller_base + TEMP_PNPMUXADDR);
+	}
+
+	/* AHB value for auxadc enable */
+	writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
+
+	/* AHB address for auxadc enable (channel 0 immediate mode selected) */
+	writel(auxadc_phys_base + AUXADC_CON1_SET_V,
+	       controller_base + TEMP_ADCENADDR);
+
+	/* AHB address for auxadc valid bit */
+	writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
+	       controller_base + TEMP_ADCVALIDADDR);
+
+	/* AHB address for auxadc voltage output */
+	writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
+	       controller_base + TEMP_ADCVOLTADDR);
+
+	/* read valid & voltage are at the same register */
+	writel(0x0, controller_base + TEMP_RDCTRL);
+
+	/* indicate where the valid bit is */
+	writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
+	       controller_base + TEMP_ADCVALIDMASK);
+
+	/* no shift */
+	writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT);
+
+	/* enable auxadc mux write transaction */
+	writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+		controller_base + TEMP_ADCWRITECTRL);
+
+	for (i = 0; i < conf->bank_data[num].num_sensors; i++)
+		writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
+		       mt->thermal_base + conf->adcpnp[i]);
+
+	writel((1 << conf->bank_data[num].num_sensors) - 1,
+	       controller_base + TEMP_MONCTL0);
+
+	writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
+	       TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+	       controller_base + TEMP_ADCWRITECTRL);
+
+	mtk_thermal_put_bank(bank);
+}
+
+static u64 of_get_phys_base(struct device_node *np)
+{
+	u64 size64;
+	const __be32 *regaddr_p;
+
+	regaddr_p = of_get_address(np, 0, &size64, NULL);
+	if (!regaddr_p)
+		return OF_BAD_ADDR;
+
+	return of_translate_address(np, regaddr_p);
+}
+
+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
+{
+	int i;
+
+	if (!(buf[0] & CALIB_BUF0_VALID_V1))
+		return -EINVAL;
+
+	mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
+
+	for (i = 0; i < mt->conf->num_sensors; i++) {
+		switch (mt->conf->vts_index[i]) {
+		case VTS1:
+			mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
+			break;
+		case VTS2:
+			mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
+			break;
+		case VTS3:
+			mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
+			break;
+		case VTS4:
+			mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
+			break;
+		case VTS5:
+			mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
+			break;
+		case VTSABB:
+			mt->vts[VTSABB] =
+				CALIB_BUF2_VTS_TSABB_V1(buf[2]);
+			break;
+		default:
+			break;
+		}
+	}
+
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
+	if (CALIB_BUF1_ID_V1(buf[1]) &
+	    CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
+		mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
+	else
+		mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
+
+	return 0;
+}
+
+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
+{
+	if (!CALIB_BUF1_VALID_V2(buf[1]))
+		return -EINVAL;
+
+	mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
+	mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
+	mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
+	mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
+	mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
+	mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
+	mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
+
+	return 0;
+}
+
+static int mtk_thermal_get_calibration_data(struct device *dev,
+					    struct mtk_thermal *mt)
+{
+	struct nvmem_cell *cell;
+	u32 *buf;
+	size_t len;
+	int i, ret = 0;
+
+	/* Start with default values */
+	mt->adc_ge = 512;
+	for (i = 0; i < mt->conf->num_sensors; i++)
+		mt->vts[i] = 260;
+	mt->degc_cali = 40;
+	mt->o_slope = 0;
+
+	cell = nvmem_cell_get(dev, "calibration-data");
+	if (IS_ERR(cell)) {
+		if (PTR_ERR(cell) == -EPROBE_DEFER)
+			return PTR_ERR(cell);
+		return 0;
+	}
+
+	buf = (u32 *)nvmem_cell_read(cell, &len);
+
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	if (len < 3 * sizeof(u32)) {
+		dev_warn(dev, "invalid calibration data\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (mt->conf->version == MTK_THERMAL_V1)
+		ret = mtk_thermal_extract_efuse_v1(mt, buf);
+	else
+		ret = mtk_thermal_extract_efuse_v2(mt, buf);
+
+	if (ret) {
+		dev_info(dev, "Device not calibrated, using default calibration values\n");
+		ret = 0;
+	}
+
+out:
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct of_device_id mtk_thermal_of_match[] = {
+	{
+		.compatible = "mediatek,mt8173-thermal",
+		.data = (void *)&mt8173_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt2701-thermal",
+		.data = (void *)&mt2701_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt2712-thermal",
+		.data = (void *)&mt2712_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt7622-thermal",
+		.data = (void *)&mt7622_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt8183-thermal",
+		.data = (void *)&mt8183_thermal_data,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
+
+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+{
+	int tmp;
+
+	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
+	tmp &= ~(0x37);
+	tmp |= 0x1;
+	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	udelay(200);
+}
+
+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
+					    void __iomem *auxadc_base)
+{
+	int tmp;
+
+	writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
+	writel(0x1, mt->thermal_base + TEMP_MONCTL0);
+	tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
+	writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
+}
+
+static int mtk_thermal_probe(struct platform_device *pdev)
+{
+	int ret, i, ctrl_id;
+	struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
+	struct mtk_thermal *mt;
+	struct resource *res;
+	u64 auxadc_phys_base, apmixed_phys_base;
+	struct thermal_zone_device *tzdev;
+	void __iomem *apmixed_base, *auxadc_base;
+
+	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
+	if (!mt)
+		return -ENOMEM;
+
+	mt->conf = of_device_get_match_data(&pdev->dev);
+
+	mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
+	if (IS_ERR(mt->clk_peri_therm))
+		return PTR_ERR(mt->clk_peri_therm);
+
+	mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
+	if (IS_ERR(mt->clk_auxadc))
+		return PTR_ERR(mt->clk_auxadc);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mt->thermal_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mt->thermal_base))
+		return PTR_ERR(mt->thermal_base);
+
+	ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
+	if (ret)
+		return ret;
+
+	mutex_init(&mt->lock);
+
+	mt->dev = &pdev->dev;
+
+	auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
+	if (!auxadc) {
+		dev_err(&pdev->dev, "missing auxadc node\n");
+		return -ENODEV;
+	}
+
+	auxadc_base = of_iomap(auxadc, 0);
+	auxadc_phys_base = of_get_phys_base(auxadc);
+
+	of_node_put(auxadc);
+
+	if (auxadc_phys_base == OF_BAD_ADDR) {
+		dev_err(&pdev->dev, "Can't get auxadc phys address\n");
+		return -EINVAL;
+	}
+
+	apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
+	if (!apmixedsys) {
+		dev_err(&pdev->dev, "missing apmixedsys node\n");
+		return -ENODEV;
+	}
+
+	apmixed_base = of_iomap(apmixedsys, 0);
+	apmixed_phys_base = of_get_phys_base(apmixedsys);
+
+	of_node_put(apmixedsys);
+
+	if (apmixed_phys_base == OF_BAD_ADDR) {
+		dev_err(&pdev->dev, "Can't get auxadc phys address\n");
+		return -EINVAL;
+	}
+
+	ret = device_reset_optional(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(mt->clk_auxadc);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(mt->clk_peri_therm);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
+		goto err_disable_clk_auxadc;
+	}
+
+	if (mt->conf->version == MTK_THERMAL_V2) {
+		mtk_thermal_turn_on_buffer(apmixed_base);
+		mtk_thermal_release_periodic_ts(mt, auxadc_base);
+	}
+
+	for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
+		for (i = 0; i < mt->conf->num_banks; i++)
+			mtk_thermal_init_bank(mt, i, apmixed_phys_base,
+					      auxadc_phys_base, ctrl_id);
+
+	platform_set_drvdata(pdev, mt);
+
+	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
+					      &mtk_thermal_ops);
+	if (IS_ERR(tzdev)) {
+		ret = PTR_ERR(tzdev);
+		goto err_disable_clk_peri_therm;
+	}
+
+	ret = devm_thermal_add_hwmon_sysfs(tzdev);
+	if (ret)
+		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
+
+	return 0;
+
+err_disable_clk_peri_therm:
+	clk_disable_unprepare(mt->clk_peri_therm);
+err_disable_clk_auxadc:
+	clk_disable_unprepare(mt->clk_auxadc);
+
+	return ret;
+}
+
+static int mtk_thermal_remove(struct platform_device *pdev)
+{
+	struct mtk_thermal *mt = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(mt->clk_peri_therm);
+	clk_disable_unprepare(mt->clk_auxadc);
+
+	return 0;
+}
+
+static struct platform_driver mtk_thermal_driver = {
+	.probe = mtk_thermal_probe,
+	.remove = mtk_thermal_remove,
+	.driver = {
+		.name = "mtk-thermal",
+		.of_match_table = mtk_thermal_of_match,
+	},
+};
+
+module_platform_driver(mtk_thermal_driver);
+
+MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
+MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>");
+MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
new file mode 100644
index 000000000..2c7f3f9a2
--- /dev/null
+++ b/drivers/thermal/qcom/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config QCOM_TSENS
+	tristate "Qualcomm TSENS Temperature Alarm"
+	depends on NVMEM_QCOM_QFPROM
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  This enables the thermal sysfs driver for the TSENS device. It shows
+	  up in Sysfs as a thermal zone with multiple trip points. Disabling the
+	  thermal zone device via the mode file results in disabling the sensor.
+	  Also able to set threshold temperature for both hot and cold and update
+	  when a threshold is reached.
+
+config QCOM_SPMI_ADC_TM5
+	tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
+	depends on OF && SPMI && IIO
+	select REGMAP_SPMI
+	select QCOM_VADC_COMMON
+	help
+	  This enables the thermal driver for the ADC thermal monitoring
+	  device. It shows up as a thermal zone with multiple trip points.
+	  Thermal client sets threshold temperature for both warm and cool and
+	  gets updated when a threshold is reached.
+
+config QCOM_SPMI_TEMP_ALARM
+	tristate "Qualcomm SPMI PMIC Temperature Alarm"
+	depends on OF && SPMI && IIO
+	select REGMAP_SPMI
+	help
+	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
+	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
+	  trip points. The temperature reported by the thermal sensor reflects the
+	  real time die temperature if an ADC is present or an estimate of the
+	  temperature based upon the over temperature stage value.
+
+config QCOM_LMH
+	tristate "Qualcomm Limits Management Hardware"
+	depends on ARCH_QCOM && QCOM_SCM
+	help
+	  This enables initialization of Qualcomm limits management
+	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
+	  input from temperature and current sensors.  On many newer Qualcomm SoCs
+	  LMh is configured in the firmware and this feature need not be enabled.
+	  However, on certain SoCs like sdm845 LMh has to be configured from kernel.
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
new file mode 100644
index 000000000..0fa251204
--- /dev/null
+++ b/drivers/thermal/qcom/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
+
+qcom_tsens-y			+= tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
+				   tsens-8960.o
+obj-$(CONFIG_QCOM_SPMI_ADC_TM5)	+= qcom-spmi-adc-tm5.o
+obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
+obj-$(CONFIG_QCOM_LMH)		+= lmh.o
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
new file mode 100644
index 000000000..4122a51e9
--- /dev/null
+++ b/drivers/thermal/qcom/lmh.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright (C) 2021, Linaro Limited. All rights reserved.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/qcom_scm.h>
+
+#define LMH_NODE_DCVS			0x44435653
+#define LMH_CLUSTER0_NODE_ID		0x6370302D
+#define LMH_CLUSTER1_NODE_ID		0x6370312D
+
+#define LMH_SUB_FN_THERMAL		0x54484D4C
+#define LMH_SUB_FN_CRNT			0x43524E54
+#define LMH_SUB_FN_REL			0x52454C00
+#define LMH_SUB_FN_BCL			0x42434C00
+
+#define LMH_ALGO_MODE_ENABLE		0x454E424C
+#define LMH_TH_HI_THRESHOLD		0x48494748
+#define LMH_TH_LOW_THRESHOLD		0x4C4F5700
+#define LMH_TH_ARM_THRESHOLD		0x41524D00
+
+#define LMH_REG_DCVS_INTR_CLR		0x8
+
+#define LMH_ENABLE_ALGOS		1
+
+struct lmh_hw_data {
+	void __iomem *base;
+	struct irq_domain *domain;
+	int irq;
+};
+
+static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
+{
+	struct lmh_hw_data *lmh_data = data;
+	int irq = irq_find_mapping(lmh_data->domain, 0);
+
+	/* Call the cpufreq driver to handle the interrupt */
+	if (irq)
+		generic_handle_irq(irq);
+
+	return IRQ_HANDLED;
+}
+
+static void lmh_enable_interrupt(struct irq_data *d)
+{
+	struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
+
+	/* Clear the existing interrupt */
+	writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR);
+	enable_irq(lmh_data->irq);
+}
+
+static void lmh_disable_interrupt(struct irq_data *d)
+{
+	struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
+
+	disable_irq_nosync(lmh_data->irq);
+}
+
+static struct irq_chip lmh_irq_chip = {
+	.name           = "lmh",
+	.irq_enable	= lmh_enable_interrupt,
+	.irq_disable	= lmh_disable_interrupt
+};
+
+static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+	struct lmh_hw_data *lmh_data = d->host_data;
+
+	irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, lmh_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops lmh_irq_ops = {
+	.map = lmh_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int lmh_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *cpu_node;
+	struct lmh_hw_data *lmh_data;
+	int temp_low, temp_high, temp_arm, cpu_id, ret;
+	unsigned int enable_alg;
+	u32 node_id;
+
+	lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL);
+	if (!lmh_data)
+		return -ENOMEM;
+
+	lmh_data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lmh_data->base))
+		return PTR_ERR(lmh_data->base);
+
+	cpu_node = of_parse_phandle(np, "cpus", 0);
+	if (!cpu_node)
+		return -EINVAL;
+	cpu_id = of_cpu_node_to_id(cpu_node);
+	of_node_put(cpu_node);
+
+	ret = of_property_read_u32(np, "qcom,lmh-temp-high-millicelsius", &temp_high);
+	if (ret) {
+		dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "qcom,lmh-temp-low-millicelsius", &temp_low);
+	if (ret) {
+		dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "qcom,lmh-temp-arm-millicelsius", &temp_arm);
+	if (ret) {
+		dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n");
+		return ret;
+	}
+
+	/*
+	 * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed
+	 * for other platforms, revisit this to check if the <cpu-id, node-id> should be part
+	 * of a dt match table.
+	 */
+	if (cpu_id == 0) {
+		node_id = LMH_CLUSTER0_NODE_ID;
+	} else if (cpu_id == 4) {
+		node_id = LMH_CLUSTER1_NODE_ID;
+	} else {
+		dev_err(dev, "Wrong CPU id associated with LMh node\n");
+		return -EINVAL;
+	}
+
+	if (!qcom_scm_lmh_dcvsh_available())
+		return -EINVAL;
+
+	enable_alg = (uintptr_t)of_device_get_match_data(dev);
+
+	if (enable_alg) {
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret) {
+			dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+			return ret;
+		}
+
+		ret = qcom_scm_lmh_profile_change(0x1);
+		if (ret) {
+			dev_err(dev, "Error %d changing profile\n", ret);
+			return ret;
+		}
+	}
+
+	/* Set default thermal trips */
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+		return ret;
+	}
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error setting thermal HI threshold%d\n", ret);
+		return ret;
+	}
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+		return ret;
+	}
+
+	lmh_data->irq = platform_get_irq(pdev, 0);
+	lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data);
+	if (!lmh_data->domain) {
+		dev_err(dev, "Error adding irq_domain\n");
+		return -EINVAL;
+	}
+
+	/* Disable the irq and let cpufreq enable it when ready to handle the interrupt */
+	irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN);
+	ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq,
+			       IRQF_ONESHOT | IRQF_NO_SUSPEND,
+			       "lmh-irq", lmh_data);
+	if (ret) {
+		dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq);
+		irq_domain_remove(lmh_data->domain);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id lmh_table[] = {
+	{ .compatible = "qcom,sc8180x-lmh", },
+	{ .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS},
+	{ .compatible = "qcom,sm8150-lmh", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lmh_table);
+
+static struct platform_driver lmh_driver = {
+	.probe = lmh_probe,
+	.driver = {
+		.name = "qcom-lmh",
+		.of_match_table = lmh_table,
+		.suppress_bind_attrs = true,
+	},
+};
+module_platform_driver(lmh_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QCOM LMh driver");
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
new file mode 100644
index 000000000..1b2c43eab
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -0,0 +1,1081 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Linaro Limited
+ *
+ * Based on original driver:
+ * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <asm-generic/unaligned.h>
+
+#include "../thermal_hwmon.h"
+
+/*
+ * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
+ * channel is programmed to use one of ADC channels for voltage comparison.
+ * Voltages are programmed using ADC codes, so we have to convert temp to
+ * voltage and then to ADC code value.
+ *
+ * Configuration of TM channels must match configuration of corresponding ADC
+ * channels.
+ */
+
+#define ADC5_MAX_CHANNEL                        0xc0
+#define ADC_TM5_NUM_CHANNELS		8
+
+#define ADC_TM5_STATUS_LOW			0x0a
+
+#define ADC_TM5_STATUS_HIGH			0x0b
+
+#define ADC_TM5_NUM_BTM				0x0f
+
+#define ADC_TM5_ADC_DIG_PARAM			0x42
+
+#define ADC_TM5_FAST_AVG_CTL			(ADC_TM5_ADC_DIG_PARAM + 1)
+#define ADC_TM5_FAST_AVG_EN				BIT(7)
+
+#define ADC_TM5_MEAS_INTERVAL_CTL		(ADC_TM5_ADC_DIG_PARAM + 2)
+#define ADC_TM5_TIMER1					3 /* 3.9ms */
+
+#define ADC_TM5_MEAS_INTERVAL_CTL2		(ADC_TM5_ADC_DIG_PARAM + 3)
+#define ADC_TM5_MEAS_INTERVAL_CTL2_MASK			0xf0
+#define ADC_TM5_TIMER2					10 /* 1 second */
+#define ADC_TM5_MEAS_INTERVAL_CTL3_MASK			0xf
+#define ADC_TM5_TIMER3					4 /* 4 second */
+
+#define ADC_TM_EN_CTL1				0x46
+#define ADC_TM_EN					BIT(7)
+#define ADC_TM_CONV_REQ				0x47
+#define ADC_TM_CONV_REQ_EN				BIT(7)
+
+#define ADC_TM5_M_CHAN_BASE			0x60
+
+#define ADC_TM5_M_ADC_CH_SEL_CTL(n)		(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 0)
+#define ADC_TM5_M_LOW_THR0(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 1)
+#define ADC_TM5_M_LOW_THR1(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 2)
+#define ADC_TM5_M_HIGH_THR0(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 3)
+#define ADC_TM5_M_HIGH_THR1(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 4)
+#define ADC_TM5_M_MEAS_INTERVAL_CTL(n)		(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 5)
+#define ADC_TM5_M_CTL(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 6)
+#define ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK		0xf
+#define ADC_TM5_M_CTL_CAL_SEL_MASK			0x30
+#define ADC_TM5_M_CTL_CAL_VAL				0x40
+#define ADC_TM5_M_EN(n)				(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 7)
+#define ADC_TM5_M_MEAS_EN				BIT(7)
+#define ADC_TM5_M_HIGH_THR_INT_EN			BIT(1)
+#define ADC_TM5_M_LOW_THR_INT_EN			BIT(0)
+
+#define ADC_TM_GEN2_STATUS1			0x08
+#define ADC_TM_GEN2_STATUS_LOW_SET		0x09
+#define ADC_TM_GEN2_STATUS_LOW_CLR		0x0a
+#define ADC_TM_GEN2_STATUS_HIGH_SET		0x0b
+#define ADC_TM_GEN2_STATUS_HIGH_CLR		0x0c
+
+#define ADC_TM_GEN2_CFG_HS_SET			0x0d
+#define ADC_TM_GEN2_CFG_HS_FLAG			BIT(0)
+#define ADC_TM_GEN2_CFG_HS_CLR			0x0e
+
+#define ADC_TM_GEN2_SID				0x40
+
+#define ADC_TM_GEN2_CH_CTL			0x41
+#define ADC_TM_GEN2_TM_CH_SEL			GENMASK(7, 5)
+#define ADC_TM_GEN2_MEAS_INT_SEL		GENMASK(3, 2)
+
+#define ADC_TM_GEN2_ADC_DIG_PARAM		0x42
+#define ADC_TM_GEN2_CTL_CAL_SEL			GENMASK(5, 4)
+#define ADC_TM_GEN2_CTL_DEC_RATIO_MASK		GENMASK(3, 2)
+
+#define ADC_TM_GEN2_FAST_AVG_CTL		0x43
+#define ADC_TM_GEN2_FAST_AVG_EN			BIT(7)
+
+#define ADC_TM_GEN2_ADC_CH_SEL_CTL		0x44
+
+#define ADC_TM_GEN2_DELAY_CTL			0x45
+#define ADC_TM_GEN2_HW_SETTLE_DELAY		GENMASK(3, 0)
+
+#define ADC_TM_GEN2_EN_CTL1			0x46
+#define ADC_TM_GEN2_EN				BIT(7)
+
+#define ADC_TM_GEN2_CONV_REQ			0x47
+#define ADC_TM_GEN2_CONV_REQ_EN			BIT(7)
+
+#define ADC_TM_GEN2_LOW_THR0			0x49
+#define ADC_TM_GEN2_LOW_THR1			0x4a
+#define ADC_TM_GEN2_HIGH_THR0			0x4b
+#define ADC_TM_GEN2_HIGH_THR1			0x4c
+#define ADC_TM_GEN2_LOWER_MASK(n)		((n) & GENMASK(7, 0))
+#define ADC_TM_GEN2_UPPER_MASK(n)		(((n) & GENMASK(15, 8)) >> 8)
+
+#define ADC_TM_GEN2_MEAS_IRQ_EN			0x4d
+#define ADC_TM_GEN2_MEAS_EN			BIT(7)
+#define ADC_TM5_GEN2_HIGH_THR_INT_EN		BIT(1)
+#define ADC_TM5_GEN2_LOW_THR_INT_EN		BIT(0)
+
+#define ADC_TM_GEN2_MEAS_INT_LSB		0x50
+#define ADC_TM_GEN2_MEAS_INT_MSB		0x51
+#define ADC_TM_GEN2_MEAS_INT_MODE		0x52
+
+#define ADC_TM_GEN2_Mn_DATA0(n)			((n * 2) + 0xa0)
+#define ADC_TM_GEN2_Mn_DATA1(n)			((n * 2) + 0xa1)
+#define ADC_TM_GEN2_DATA_SHIFT			8
+
+enum adc5_timer_select {
+	ADC5_TIMER_SEL_1 = 0,
+	ADC5_TIMER_SEL_2,
+	ADC5_TIMER_SEL_3,
+	ADC5_TIMER_SEL_NONE,
+};
+
+enum adc5_gen {
+	ADC_TM5,
+	ADC_TM_HC,
+	ADC_TM5_GEN2,
+	ADC_TM5_MAX
+};
+
+enum adc_tm5_cal_method {
+	ADC_TM5_NO_CAL = 0,
+	ADC_TM5_RATIOMETRIC_CAL,
+	ADC_TM5_ABSOLUTE_CAL
+};
+
+enum adc_tm_gen2_time_select {
+	MEAS_INT_50MS = 0,
+	MEAS_INT_100MS,
+	MEAS_INT_1S,
+	MEAS_INT_SET,
+	MEAS_INT_NONE,
+};
+
+struct adc_tm5_chip;
+struct adc_tm5_channel;
+
+struct adc_tm5_data {
+	const u32 full_scale_code_volt;
+	unsigned int *decimation;
+	unsigned int *hw_settle;
+	int (*disable_channel)(struct adc_tm5_channel *channel);
+	int (*configure)(struct adc_tm5_channel *channel, int low, int high);
+	irqreturn_t (*isr)(int irq, void *data);
+	int (*init)(struct adc_tm5_chip *chip);
+	char *irq_name;
+	int gen;
+};
+
+/**
+ * struct adc_tm5_channel - ADC Thermal Monitoring channel data.
+ * @channel: channel number.
+ * @adc_channel: corresponding ADC channel number.
+ * @cal_method: calibration method.
+ * @prescale: channel scaling performed on the input signal.
+ * @hw_settle_time: the time between AMUX being configured and the
+ *	start of conversion.
+ * @decimation: sampling rate supported for the channel.
+ * @avg_samples: ability to provide single result from the ADC
+ *	that is an average of multiple measurements.
+ * @high_thr_en: channel upper voltage threshold enable state.
+ * @low_thr_en: channel lower voltage threshold enable state.
+ * @meas_en: recurring measurement enable state
+ * @iio: IIO channel instance used by this channel.
+ * @chip: ADC TM chip instance.
+ * @tzd: thermal zone device used by this channel.
+ */
+struct adc_tm5_channel {
+	unsigned int		channel;
+	unsigned int		adc_channel;
+	enum adc_tm5_cal_method	cal_method;
+	unsigned int		prescale;
+	unsigned int		hw_settle_time;
+	unsigned int		decimation;	/* For Gen2 ADC_TM */
+	unsigned int		avg_samples;	/* For Gen2 ADC_TM */
+	bool			high_thr_en;	/* For Gen2 ADC_TM */
+	bool			low_thr_en;	/* For Gen2 ADC_TM */
+	bool			meas_en;	/* For Gen2 ADC_TM */
+	struct iio_channel	*iio;
+	struct adc_tm5_chip	*chip;
+	struct thermal_zone_device *tzd;
+};
+
+/**
+ * struct adc_tm5_chip - ADC Thermal Monitoring properties
+ * @regmap: SPMI ADC5 Thermal Monitoring  peripheral register map field.
+ * @dev: SPMI ADC5 device.
+ * @data: software configuration data.
+ * @channels: array of ADC TM channel data.
+ * @nchannels: amount of channels defined/allocated
+ * @decimation: sampling rate supported for the channel.
+ *      Applies to all channels, used only on Gen1 ADC_TM.
+ * @avg_samples: ability to provide single result from the ADC
+ *      that is an average of multiple measurements. Applies to all
+ *      channels, used only on Gen1 ADC_TM.
+ * @base: base address of TM registers.
+ * @adc_mutex_lock: ADC_TM mutex lock, used only on Gen2 ADC_TM.
+ *      It is used to ensure only one ADC channel configuration
+ *      is done at a time using the shared set of configuration
+ *      registers.
+ */
+struct adc_tm5_chip {
+	struct regmap		*regmap;
+	struct device		*dev;
+	const struct adc_tm5_data	*data;
+	struct adc_tm5_channel	*channels;
+	unsigned int		nchannels;
+	unsigned int		decimation;
+	unsigned int		avg_samples;
+	u16			base;
+	struct mutex		adc_mutex_lock;
+};
+
+static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
+{
+	return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
+}
+
+static int adc_tm5_write(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
+{
+	return regmap_bulk_write(adc_tm->regmap, adc_tm->base + offset, data, len);
+}
+
+static int adc_tm5_reg_update(struct adc_tm5_chip *adc_tm, u16 offset, u8 mask, u8 val)
+{
+	return regmap_write_bits(adc_tm->regmap, adc_tm->base + offset, mask, val);
+}
+
+static irqreturn_t adc_tm5_isr(int irq, void *data)
+{
+	struct adc_tm5_chip *chip = data;
+	u8 status_low, status_high, ctl;
+	int ret, i;
+
+	ret = adc_tm5_read(chip, ADC_TM5_STATUS_LOW, &status_low, sizeof(status_low));
+	if (unlikely(ret)) {
+		dev_err(chip->dev, "read status low failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_read(chip, ADC_TM5_STATUS_HIGH, &status_high, sizeof(status_high));
+	if (unlikely(ret)) {
+		dev_err(chip->dev, "read status high failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		bool upper_set = false, lower_set = false;
+		unsigned int ch = chip->channels[i].channel;
+
+		/* No TZD, we warned at the boot time */
+		if (!chip->channels[i].tzd)
+			continue;
+
+		ret = adc_tm5_read(chip, ADC_TM5_M_EN(ch), &ctl, sizeof(ctl));
+		if (unlikely(ret)) {
+			dev_err(chip->dev, "ctl read failed: %d, channel %d\n", ret, i);
+			continue;
+		}
+
+		if (!(ctl & ADC_TM5_M_MEAS_EN))
+			continue;
+
+		lower_set = (status_low & BIT(ch)) &&
+			(ctl & ADC_TM5_M_LOW_THR_INT_EN);
+
+		upper_set = (status_high & BIT(ch)) &&
+			(ctl & ADC_TM5_M_HIGH_THR_INT_EN);
+
+		if (upper_set || lower_set)
+			thermal_zone_device_update(chip->channels[i].tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t adc_tm5_gen2_isr(int irq, void *data)
+{
+	struct adc_tm5_chip *chip = data;
+	u8 status_low, status_high;
+	int ret, i;
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low));
+	if (ret) {
+		dev_err(chip->dev, "read status_low failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high));
+	if (ret) {
+		dev_err(chip->dev, "read status_high failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low));
+	if (ret < 0) {
+		dev_err(chip->dev, "clear status low failed with %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high));
+	if (ret < 0) {
+		dev_err(chip->dev, "clear status high failed with %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		bool upper_set = false, lower_set = false;
+		unsigned int ch = chip->channels[i].channel;
+
+		/* No TZD, we warned at the boot time */
+		if (!chip->channels[i].tzd)
+			continue;
+
+		if (!chip->channels[i].meas_en)
+			continue;
+
+		lower_set = (status_low & BIT(ch)) &&
+			(chip->channels[i].low_thr_en);
+
+		upper_set = (status_high & BIT(ch)) &&
+			(chip->channels[i].high_thr_en);
+
+		if (upper_set || lower_set)
+			thermal_zone_device_update(chip->channels[i].tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int adc_tm5_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct adc_tm5_channel *channel = tz->devdata;
+	int ret;
+
+	if (!channel || !channel->iio)
+		return -EINVAL;
+
+	ret = iio_read_channel_processed(channel->iio, temp);
+	if (ret < 0)
+		return ret;
+
+	if (ret != IIO_VAL_INT)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int adc_tm5_disable_channel(struct adc_tm5_channel *channel)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	unsigned int reg = ADC_TM5_M_EN(channel->channel);
+
+	return adc_tm5_reg_update(chip, reg,
+				  ADC_TM5_M_MEAS_EN |
+				  ADC_TM5_M_HIGH_THR_INT_EN |
+				  ADC_TM5_M_LOW_THR_INT_EN,
+				  0);
+}
+
+#define ADC_TM_GEN2_POLL_DELAY_MIN_US		100
+#define ADC_TM_GEN2_POLL_DELAY_MAX_US		110
+#define ADC_TM_GEN2_POLL_RETRY_COUNT		3
+
+static int32_t adc_tm5_gen2_conv_req(struct adc_tm5_chip *chip)
+{
+	int ret;
+	u8 data;
+	unsigned int count;
+
+	data = ADC_TM_GEN2_EN;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_EN_CTL1, &data, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm enable failed with %d\n", ret);
+		return ret;
+	}
+
+	data = ADC_TM_GEN2_CFG_HS_FLAG;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_CFG_HS_SET, &data, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm handshake failed with %d\n", ret);
+		return ret;
+	}
+
+	data = ADC_TM_GEN2_CONV_REQ_EN;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_CONV_REQ, &data, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm request conversion failed with %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * SW sets a handshake bit and waits for PBS to clear it
+	 * before the next conversion request can be queued.
+	 */
+
+	for (count = 0; count < ADC_TM_GEN2_POLL_RETRY_COUNT; count++) {
+		ret = adc_tm5_read(chip, ADC_TM_GEN2_CFG_HS_SET, &data, sizeof(data));
+		if (ret < 0) {
+			dev_err(chip->dev, "adc-tm read failed with %d\n", ret);
+			return ret;
+		}
+
+		if (!(data & ADC_TM_GEN2_CFG_HS_FLAG))
+			return ret;
+		usleep_range(ADC_TM_GEN2_POLL_DELAY_MIN_US,
+			ADC_TM_GEN2_POLL_DELAY_MAX_US);
+	}
+
+	dev_err(chip->dev, "adc-tm conversion request handshake timed out\n");
+
+	return -ETIMEDOUT;
+}
+
+static int adc_tm5_gen2_disable_channel(struct adc_tm5_channel *channel)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	int ret;
+	u8 val;
+
+	mutex_lock(&chip->adc_mutex_lock);
+
+	channel->meas_en = false;
+	channel->high_thr_en = false;
+	channel->low_thr_en = false;
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_CH_CTL, &val, sizeof(val));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm block read failed with %d\n", ret);
+		goto disable_fail;
+	}
+
+	val &= ~ADC_TM_GEN2_TM_CH_SEL;
+	val |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel);
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_CH_CTL, &val, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm channel disable failed with %d\n", ret);
+		goto disable_fail;
+	}
+
+	val = 0;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_MEAS_IRQ_EN, &val, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm interrupt disable failed with %d\n", ret);
+		goto disable_fail;
+	}
+
+
+	ret = adc_tm5_gen2_conv_req(channel->chip);
+	if (ret < 0)
+		dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret);
+
+disable_fail:
+	mutex_unlock(&chip->adc_mutex_lock);
+	return ret;
+}
+
+static int adc_tm5_enable(struct adc_tm5_chip *chip)
+{
+	int ret;
+	u8 data;
+
+	data = ADC_TM_EN;
+	ret = adc_tm5_write(chip, ADC_TM_EN_CTL1, &data, sizeof(data));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm enable failed\n");
+		return ret;
+	}
+
+	data = ADC_TM_CONV_REQ_EN;
+	ret = adc_tm5_write(chip, ADC_TM_CONV_REQ, &data, sizeof(data));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm request conversion failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	u8 buf[8];
+	u16 reg = ADC_TM5_M_ADC_CH_SEL_CTL(channel->channel);
+	int ret;
+
+	ret = adc_tm5_read(chip, reg, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "channel %d params read failed: %d\n", channel->channel, ret);
+		return ret;
+	}
+
+	buf[0] = channel->adc_channel;
+
+	/* High temperature corresponds to low voltage threshold */
+	if (high != INT_MAX) {
+		u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
+				chip->data->full_scale_code_volt, high);
+
+		put_unaligned_le16(adc_code, &buf[1]);
+		buf[7] |= ADC_TM5_M_LOW_THR_INT_EN;
+	} else {
+		buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN;
+	}
+
+	/* Low temperature corresponds to high voltage threshold */
+	if (low != -INT_MAX) {
+		u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
+				chip->data->full_scale_code_volt, low);
+
+		put_unaligned_le16(adc_code, &buf[3]);
+		buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN;
+	} else {
+		buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN;
+	}
+
+	buf[5] = ADC5_TIMER_SEL_2;
+
+	/* Set calibration select, hw_settle delay */
+	buf[6] &= ~ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK;
+	buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK, channel->hw_settle_time);
+	buf[6] &= ~ADC_TM5_M_CTL_CAL_SEL_MASK;
+	buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_CAL_SEL_MASK, channel->cal_method);
+
+	buf[7] |= ADC_TM5_M_MEAS_EN;
+
+	ret = adc_tm5_write(chip, reg, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
+		return ret;
+	}
+
+	return adc_tm5_enable(chip);
+}
+
+static int adc_tm5_gen2_configure(struct adc_tm5_channel *channel, int low, int high)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	int ret;
+	u8 buf[14];
+	u16 adc_code;
+
+	mutex_lock(&chip->adc_mutex_lock);
+
+	channel->meas_en = true;
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_SID, buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm block read failed with %d\n", ret);
+		goto config_fail;
+	}
+
+	/* Set SID from virtual channel number */
+	buf[0] = channel->adc_channel >> 8;
+
+	/* Set TM channel number used and measurement interval */
+	buf[1] &= ~ADC_TM_GEN2_TM_CH_SEL;
+	buf[1] |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel);
+	buf[1] &= ~ADC_TM_GEN2_MEAS_INT_SEL;
+	buf[1] |= FIELD_PREP(ADC_TM_GEN2_MEAS_INT_SEL, MEAS_INT_1S);
+
+	buf[2] &= ~ADC_TM_GEN2_CTL_DEC_RATIO_MASK;
+	buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_DEC_RATIO_MASK, channel->decimation);
+	buf[2] &= ~ADC_TM_GEN2_CTL_CAL_SEL;
+	buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_CAL_SEL, channel->cal_method);
+
+	buf[3] = channel->avg_samples | ADC_TM_GEN2_FAST_AVG_EN;
+
+	buf[4] = channel->adc_channel & 0xff;
+
+	buf[5] = channel->hw_settle_time & ADC_TM_GEN2_HW_SETTLE_DELAY;
+
+	/* High temperature corresponds to low voltage threshold */
+	if (high != INT_MAX) {
+		channel->low_thr_en = true;
+		adc_code = qcom_adc_tm5_gen2_temp_res_scale(high);
+		put_unaligned_le16(adc_code, &buf[9]);
+	} else {
+		channel->low_thr_en = false;
+	}
+
+	/* Low temperature corresponds to high voltage threshold */
+	if (low != -INT_MAX) {
+		channel->high_thr_en = true;
+		adc_code = qcom_adc_tm5_gen2_temp_res_scale(low);
+		put_unaligned_le16(adc_code, &buf[11]);
+	} else {
+		channel->high_thr_en = false;
+	}
+
+	buf[13] = ADC_TM_GEN2_MEAS_EN;
+	if (channel->high_thr_en)
+		buf[13] |= ADC_TM5_GEN2_HIGH_THR_INT_EN;
+	if (channel->low_thr_en)
+		buf[13] |= ADC_TM5_GEN2_LOW_THR_INT_EN;
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_SID, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
+		goto config_fail;
+	}
+
+	ret = adc_tm5_gen2_conv_req(channel->chip);
+	if (ret < 0)
+		dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret);
+
+config_fail:
+	mutex_unlock(&chip->adc_mutex_lock);
+	return ret;
+}
+
+static int adc_tm5_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct adc_tm5_channel *channel = tz->devdata;
+	struct adc_tm5_chip *chip;
+	int ret;
+
+	if (!channel)
+		return -EINVAL;
+
+	chip = channel->chip;
+	dev_dbg(chip->dev, "%d:low(mdegC):%d, high(mdegC):%d\n",
+		channel->channel, low, high);
+
+	if (high == INT_MAX && low <= -INT_MAX)
+		ret = chip->data->disable_channel(channel);
+	else
+		ret = chip->data->configure(channel, low, high);
+
+	return ret;
+}
+
+static const struct thermal_zone_device_ops adc_tm5_thermal_ops = {
+	.get_temp = adc_tm5_get_temp,
+	.set_trips = adc_tm5_set_trips,
+};
+
+static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
+{
+	unsigned int i;
+	struct thermal_zone_device *tzd;
+
+	for (i = 0; i < adc_tm->nchannels; i++) {
+		adc_tm->channels[i].chip = adc_tm;
+		tzd = devm_thermal_of_zone_register(adc_tm->dev,
+						    adc_tm->channels[i].channel,
+						    &adc_tm->channels[i],
+						    &adc_tm5_thermal_ops);
+		if (IS_ERR(tzd)) {
+			if (PTR_ERR(tzd) == -ENODEV) {
+				dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
+					 adc_tm->channels[i].channel);
+				continue;
+			}
+
+			dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n",
+				adc_tm->channels[i].channel, PTR_ERR(tzd));
+			return PTR_ERR(tzd);
+		}
+		adc_tm->channels[i].tzd = tzd;
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(adc_tm->dev,
+				 "Failed to add hwmon sysfs attributes\n");
+	}
+
+	return 0;
+}
+
+static int adc_tm_hc_init(struct adc_tm5_chip *chip)
+{
+	unsigned int i;
+	u8 buf[2];
+	int ret;
+
+	for (i = 0; i < chip->nchannels; i++) {
+		if (chip->channels[i].channel >= ADC_TM5_NUM_CHANNELS) {
+			dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+			return -EINVAL;
+		}
+	}
+
+	buf[0] = chip->decimation;
+	buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
+
+	ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
+	if (ret)
+		dev_err(chip->dev, "block write failed: %d\n", ret);
+
+	return ret;
+}
+
+static int adc_tm5_init(struct adc_tm5_chip *chip)
+{
+	u8 buf[4], channels_available;
+	int ret;
+	unsigned int i;
+
+	ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM,
+			   &channels_available, sizeof(channels_available));
+	if (ret) {
+		dev_err(chip->dev, "read failed for BTM channels\n");
+		return ret;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		if (chip->channels[i].channel >= channels_available) {
+			dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+			return -EINVAL;
+		}
+	}
+
+	buf[0] = chip->decimation;
+	buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
+	buf[2] = ADC_TM5_TIMER1;
+	buf[3] = FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL2_MASK, ADC_TM5_TIMER2) |
+		 FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL3_MASK, ADC_TM5_TIMER3);
+
+	ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "block write failed: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int adc_tm5_gen2_init(struct adc_tm5_chip *chip)
+{
+	u8 channels_available;
+	int ret;
+	unsigned int i;
+
+	ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM,
+			   &channels_available, sizeof(channels_available));
+	if (ret) {
+		dev_err(chip->dev, "read failed for BTM channels\n");
+		return ret;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		if (chip->channels[i].channel >= channels_available) {
+			dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+			return -EINVAL;
+		}
+	}
+
+	mutex_init(&chip->adc_mutex_lock);
+
+	return ret;
+}
+
+static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
+				       struct adc_tm5_channel *channel,
+				       struct device_node *node)
+{
+	const char *name = node->name;
+	u32 chan, value, adc_channel, varr[2];
+	int ret;
+	struct device *dev = adc_tm->dev;
+	struct of_phandle_args args;
+
+	ret = of_property_read_u32(node, "reg", &chan);
+	if (ret) {
+		dev_err(dev, "%s: invalid channel number %d\n", name, ret);
+		return ret;
+	}
+
+	if (chan >= ADC_TM5_NUM_CHANNELS) {
+		dev_err(dev, "%s: channel number too big: %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	channel->channel = chan;
+
+	/*
+	 * We are tied to PMIC's ADC controller, which always use single
+	 * argument for channel number.  So don't bother parsing
+	 * #io-channel-cells, just enforce cell_count = 1.
+	 */
+	ret = of_parse_phandle_with_fixed_args(node, "io-channels", 1, 0, &args);
+	if (ret < 0) {
+		dev_err(dev, "%s: error parsing ADC channel number %d: %d\n", name, chan, ret);
+		return ret;
+	}
+	of_node_put(args.np);
+
+	if (args.args_count != 1) {
+		dev_err(dev, "%s: invalid args count for ADC channel %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	adc_channel = args.args[0];
+	if (adc_tm->data->gen == ADC_TM5_GEN2)
+		adc_channel &= 0xff;
+
+	if (adc_channel >= ADC5_MAX_CHANNEL) {
+		dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan);
+		return -EINVAL;
+	}
+	channel->adc_channel = args.args[0];
+
+	channel->iio = devm_fwnode_iio_channel_get_by_name(adc_tm->dev,
+							   of_fwnode_handle(node), NULL);
+	if (IS_ERR(channel->iio)) {
+		ret = PTR_ERR(channel->iio);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "%s: error getting channel: %d\n", name, ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	if (!ret) {
+		ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
+		if (ret < 0) {
+			dev_err(dev, "%s: invalid pre-scaling <%d %d>\n",
+				name, varr[0], varr[1]);
+			return ret;
+		}
+		channel->prescale = ret;
+	} else {
+		/* 1:1 prescale is index 0 */
+		channel->prescale = 0;
+	}
+
+	ret = of_property_read_u32(node, "qcom,hw-settle-time-us", &value);
+	if (!ret) {
+		ret = qcom_adc5_hw_settle_time_from_dt(value, adc_tm->data->hw_settle);
+		if (ret < 0) {
+			dev_err(dev, "%s invalid hw-settle-time-us %d us\n",
+				name, value);
+			return ret;
+		}
+		channel->hw_settle_time = ret;
+	} else {
+		channel->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
+	}
+
+	if (of_property_read_bool(node, "qcom,ratiometric"))
+		channel->cal_method = ADC_TM5_RATIOMETRIC_CAL;
+	else
+		channel->cal_method = ADC_TM5_ABSOLUTE_CAL;
+
+	if (adc_tm->data->gen == ADC_TM5_GEN2) {
+		ret = of_property_read_u32(node, "qcom,decimation", &value);
+		if (!ret) {
+			ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
+			if (ret < 0) {
+				dev_err(dev, "invalid decimation %d\n", value);
+				return ret;
+			}
+			channel->decimation = ret;
+		} else {
+			channel->decimation = ADC5_DECIMATION_DEFAULT;
+		}
+
+		ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+		if (!ret) {
+			ret = qcom_adc5_avg_samples_from_dt(value);
+			if (ret < 0) {
+				dev_err(dev, "invalid avg-samples %d\n", value);
+				return ret;
+			}
+			channel->avg_samples = ret;
+		} else {
+			channel->avg_samples = VADC_DEF_AVG_SAMPLES;
+		}
+	}
+
+	return 0;
+}
+
+static const struct adc_tm5_data adc_tm5_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 250, 420, 840 },
+	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 8000, 16000, 32000,
+					 64000, 128000 },
+	.disable_channel = adc_tm5_disable_channel,
+	.configure = adc_tm5_configure,
+	.isr = adc_tm5_isr,
+	.init = adc_tm5_init,
+	.irq_name = "pm-adc-tm5",
+	.gen = ADC_TM5,
+};
+
+static const struct adc_tm5_data adc_tm_hc_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 256, 512, 1024 },
+	.hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 6000, 8000, 10000 },
+	.disable_channel = adc_tm5_disable_channel,
+	.configure = adc_tm5_configure,
+	.isr = adc_tm5_isr,
+	.init = adc_tm_hc_init,
+	.irq_name = "pm-adc-tm5",
+	.gen = ADC_TM_HC,
+};
+
+static const struct adc_tm5_data adc_tm5_gen2_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 85, 340, 1360 },
+	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 8000, 16000, 32000,
+					 64000, 128000 },
+	.disable_channel = adc_tm5_gen2_disable_channel,
+	.configure = adc_tm5_gen2_configure,
+	.isr = adc_tm5_gen2_isr,
+	.init = adc_tm5_gen2_init,
+	.irq_name = "pm-adc-tm5-gen2",
+	.gen = ADC_TM5_GEN2,
+};
+
+static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
+{
+	struct adc_tm5_channel *channels;
+	struct device_node *child;
+	u32 value;
+	int ret;
+	struct device *dev = adc_tm->dev;
+
+	adc_tm->nchannels = of_get_available_child_count(node);
+	if (!adc_tm->nchannels)
+		return -EINVAL;
+
+	adc_tm->channels = devm_kcalloc(dev, adc_tm->nchannels,
+					sizeof(*adc_tm->channels), GFP_KERNEL);
+	if (!adc_tm->channels)
+		return -ENOMEM;
+
+	channels = adc_tm->channels;
+
+	adc_tm->data = of_device_get_match_data(dev);
+	if (!adc_tm->data)
+		adc_tm->data = &adc_tm5_data_pmic;
+
+	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	if (!ret) {
+		ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
+		if (ret < 0) {
+			dev_err(dev, "invalid decimation %d\n", value);
+			return ret;
+		}
+		adc_tm->decimation = ret;
+	} else {
+		adc_tm->decimation = ADC5_DECIMATION_DEFAULT;
+	}
+
+	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	if (!ret) {
+		ret = qcom_adc5_avg_samples_from_dt(value);
+		if (ret < 0) {
+			dev_err(dev, "invalid avg-samples %d\n", value);
+			return ret;
+		}
+		adc_tm->avg_samples = ret;
+	} else {
+		adc_tm->avg_samples = VADC_DEF_AVG_SAMPLES;
+	}
+
+	for_each_available_child_of_node(node, child) {
+		ret = adc_tm5_get_dt_channel_data(adc_tm, channels, child);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+
+		channels++;
+	}
+
+	return 0;
+}
+
+static int adc_tm5_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct adc_tm5_chip *adc_tm;
+	struct regmap *regmap;
+	int ret, irq;
+	u32 reg;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret)
+		return ret;
+
+	adc_tm = devm_kzalloc(&pdev->dev, sizeof(*adc_tm), GFP_KERNEL);
+	if (!adc_tm)
+		return -ENOMEM;
+
+	adc_tm->regmap = regmap;
+	adc_tm->dev = dev;
+	adc_tm->base = reg;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = adc_tm5_get_dt_data(adc_tm, node);
+	if (ret) {
+		dev_err(dev, "get dt data failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = adc_tm->data->init(adc_tm);
+	if (ret) {
+		dev_err(dev, "adc-tm init failed\n");
+		return ret;
+	}
+
+	ret = adc_tm5_register_tzd(adc_tm);
+	if (ret) {
+		dev_err(dev, "tzd register failed\n");
+		return ret;
+	}
+
+	return devm_request_threaded_irq(dev, irq, NULL, adc_tm->data->isr,
+			IRQF_ONESHOT, adc_tm->data->irq_name, adc_tm);
+}
+
+static const struct of_device_id adc_tm5_match_table[] = {
+	{
+		.compatible = "qcom,spmi-adc-tm5",
+		.data = &adc_tm5_data_pmic,
+	},
+	{
+		.compatible = "qcom,spmi-adc-tm-hc",
+		.data = &adc_tm_hc_data_pmic,
+	},
+	{
+		.compatible = "qcom,spmi-adc-tm5-gen2",
+		.data = &adc_tm5_gen2_data_pmic,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
+
+static struct platform_driver adc_tm5_driver = {
+	.driver = {
+		.name = "qcom-spmi-adc-tm5",
+		.of_match_table = adc_tm5_match_table,
+	},
+	.probe = adc_tm5_probe,
+};
+module_platform_driver(adc_tm5_driver);
+
+MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
new file mode 100644
index 000000000..ad8497810
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+#define QPNP_TM_REG_DIG_MAJOR		0x01
+#define QPNP_TM_REG_TYPE		0x04
+#define QPNP_TM_REG_SUBTYPE		0x05
+#define QPNP_TM_REG_STATUS		0x08
+#define QPNP_TM_REG_SHUTDOWN_CTRL1	0x40
+#define QPNP_TM_REG_ALARM_CTRL		0x46
+
+#define QPNP_TM_TYPE			0x09
+#define QPNP_TM_SUBTYPE_GEN1		0x08
+#define QPNP_TM_SUBTYPE_GEN2		0x09
+
+#define STATUS_GEN1_STAGE_MASK		GENMASK(1, 0)
+#define STATUS_GEN2_STATE_MASK		GENMASK(6, 4)
+#define STATUS_GEN2_STATE_SHIFT		4
+
+#define SHUTDOWN_CTRL1_OVERRIDE_S2	BIT(6)
+#define SHUTDOWN_CTRL1_THRESHOLD_MASK	GENMASK(1, 0)
+
+#define SHUTDOWN_CTRL1_RATE_25HZ	BIT(3)
+
+#define ALARM_CTRL_FORCE_ENABLE		BIT(7)
+
+#define THRESH_COUNT			4
+#define STAGE_COUNT			3
+
+/* Over-temperature trip point values in mC */
+static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
+	{ 105000, 125000, 145000 },
+	{ 110000, 130000, 150000 },
+	{ 115000, 135000, 155000 },
+	{ 120000, 140000, 160000 },
+};
+
+static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
+	{  90000, 110000, 140000 },
+	{  95000, 115000, 145000 },
+	{ 100000, 120000, 150000 },
+	{ 105000, 125000, 155000 },
+};
+
+#define TEMP_THRESH_STEP		5000 /* Threshold step: 5 C */
+
+#define THRESH_MIN			0
+#define THRESH_MAX			3
+
+#define TEMP_STAGE_HYSTERESIS		2000
+
+/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
+#define DEFAULT_TEMP			37000
+
+struct qpnp_tm_chip {
+	struct regmap			*map;
+	struct device			*dev;
+	struct thermal_zone_device	*tz_dev;
+	unsigned int			subtype;
+	long				temp;
+	unsigned int			thresh;
+	unsigned int			stage;
+	unsigned int			prev_stage;
+	unsigned int			base;
+	/* protects .thresh, .stage and chip registers */
+	struct mutex			lock;
+	bool				initialized;
+
+	struct iio_channel		*adc;
+	const long			(*temp_map)[THRESH_COUNT][STAGE_COUNT];
+};
+
+/* This array maps from GEN2 alarm state to GEN1 alarm stage */
+static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
+
+static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(chip->map, chip->base + addr, &val);
+	if (ret < 0)
+		return ret;
+
+	*data = val;
+	return 0;
+}
+
+static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
+{
+	return regmap_write(chip->map, chip->base + addr, data);
+}
+
+/**
+ * qpnp_tm_decode_temp() - return temperature in mC corresponding to the
+ *		specified over-temperature stage
+ * @chip:		Pointer to the qpnp_tm chip
+ * @stage:		Over-temperature stage
+ *
+ * Return: temperature in mC
+ */
+static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
+{
+	if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 ||
+	    stage > STAGE_COUNT)
+		return 0;
+
+	return (*chip->temp_map)[chip->thresh][stage - 1];
+}
+
+/**
+ * qpnp_tm_get_temp_stage() - return over-temperature stage
+ * @chip:		Pointer to the qpnp_tm chip
+ *
+ * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
+ */
+static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
+{
+	int ret;
+	u8 reg = 0;
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
+		ret = reg & STATUS_GEN1_STAGE_MASK;
+	else
+		ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
+
+	return ret;
+}
+
+/*
+ * This function updates the internal temp value based on the
+ * current thermal stage and threshold as well as the previous stage
+ */
+static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
+{
+	unsigned int stage, stage_new, stage_old;
+	int ret;
+
+	WARN_ON(!mutex_is_locked(&chip->lock));
+
+	ret = qpnp_tm_get_temp_stage(chip);
+	if (ret < 0)
+		return ret;
+	stage = ret;
+
+	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
+		stage_new = stage;
+		stage_old = chip->stage;
+	} else {
+		stage_new = alarm_state_map[stage];
+		stage_old = alarm_state_map[chip->stage];
+	}
+
+	if (stage_new > stage_old) {
+		/* increasing stage, use lower bound */
+		chip->temp = qpnp_tm_decode_temp(chip, stage_new)
+				+ TEMP_STAGE_HYSTERESIS;
+	} else if (stage_new < stage_old) {
+		/* decreasing stage, use upper bound */
+		chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1)
+				- TEMP_STAGE_HYSTERESIS;
+	}
+
+	chip->stage = stage;
+
+	return 0;
+}
+
+static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct qpnp_tm_chip *chip = tz->devdata;
+	int ret, mili_celsius;
+
+	if (!temp)
+		return -EINVAL;
+
+	if (!chip->initialized) {
+		*temp = DEFAULT_TEMP;
+		return 0;
+	}
+
+	if (!chip->adc) {
+		mutex_lock(&chip->lock);
+		ret = qpnp_tm_update_temp_no_adc(chip);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = iio_read_channel_processed(chip->adc, &mili_celsius);
+		if (ret < 0)
+			return ret;
+
+		chip->temp = mili_celsius;
+	}
+
+	*temp = chip->temp;
+
+	return 0;
+}
+
+static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
+					     int temp)
+{
+	long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
+	long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
+	bool disable_s2_shutdown = false;
+	u8 reg;
+
+	WARN_ON(!mutex_is_locked(&chip->lock));
+
+	/*
+	 * Default: S2 and S3 shutdown enabled, thresholds at
+	 * lowest threshold set, monitoring at 25Hz
+	 */
+	reg = SHUTDOWN_CTRL1_RATE_25HZ;
+
+	if (temp == THERMAL_TEMP_INVALID ||
+	    temp < stage2_threshold_min) {
+		chip->thresh = THRESH_MIN;
+		goto skip;
+	}
+
+	if (temp <= stage2_threshold_max) {
+		chip->thresh = THRESH_MAX -
+			((stage2_threshold_max - temp) /
+			 TEMP_THRESH_STEP);
+		disable_s2_shutdown = true;
+	} else {
+		chip->thresh = THRESH_MAX;
+
+		if (chip->adc)
+			disable_s2_shutdown = true;
+		else
+			dev_warn(chip->dev,
+				 "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n",
+				 temp, stage2_threshold_max, stage2_threshold_max);
+	}
+
+skip:
+	reg |= chip->thresh;
+	if (disable_s2_shutdown)
+		reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
+
+	return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
+}
+
+static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
+{
+	struct qpnp_tm_chip *chip = tz->devdata;
+	const struct thermal_trip *trip_points;
+	int ret;
+
+	trip_points = of_thermal_get_trip_points(chip->tz_dev);
+	if (!trip_points)
+		return -EINVAL;
+
+	if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
+		return 0;
+
+	mutex_lock(&chip->lock);
+	ret = qpnp_tm_update_critical_trip_temp(chip, temp);
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = {
+	.get_temp = qpnp_tm_get_temp,
+	.set_trip_temp = qpnp_tm_set_trip_temp,
+};
+
+static irqreturn_t qpnp_tm_isr(int irq, void *data)
+{
+	struct qpnp_tm_chip *chip = data;
+
+	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
+{
+	int ntrips;
+	const struct thermal_trip *trips;
+	int i;
+
+	ntrips = of_thermal_get_ntrips(chip->tz_dev);
+	if (ntrips <= 0)
+		return THERMAL_TEMP_INVALID;
+
+	trips = of_thermal_get_trip_points(chip->tz_dev);
+	if (!trips)
+		return THERMAL_TEMP_INVALID;
+
+	for (i = 0; i < ntrips; i++) {
+		if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
+		    trips[i].type == THERMAL_TRIP_CRITICAL)
+			return trips[i].temperature;
+	}
+
+	return THERMAL_TEMP_INVALID;
+}
+
+/*
+ * This function initializes the internal temp value based on only the
+ * current thermal stage and threshold. Setup threshold control and
+ * disable shutdown override.
+ */
+static int qpnp_tm_init(struct qpnp_tm_chip *chip)
+{
+	unsigned int stage;
+	int ret;
+	u8 reg = 0;
+	int crit_temp;
+
+	mutex_lock(&chip->lock);
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
+	if (ret < 0)
+		goto out;
+
+	chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
+	chip->temp = DEFAULT_TEMP;
+
+	ret = qpnp_tm_get_temp_stage(chip);
+	if (ret < 0)
+		goto out;
+	chip->stage = ret;
+
+	stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
+		? chip->stage : alarm_state_map[chip->stage];
+
+	if (stage)
+		chip->temp = qpnp_tm_decode_temp(chip, stage);
+
+	crit_temp = qpnp_tm_get_critical_trip_temp(chip);
+	ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
+	if (ret < 0)
+		goto out;
+
+	/* Enable the thermal alarm PMIC module in always-on mode. */
+	reg = ALARM_CTRL_FORCE_ENABLE;
+	ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
+
+	chip->initialized = true;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int qpnp_tm_probe(struct platform_device *pdev)
+{
+	struct qpnp_tm_chip *chip;
+	struct device_node *node;
+	u8 type, subtype, dig_major;
+	u32 res;
+	int ret, irq;
+
+	node = pdev->dev.of_node;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, chip);
+	chip->dev = &pdev->dev;
+
+	mutex_init(&chip->lock);
+
+	chip->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!chip->map)
+		return -ENXIO;
+
+	ret = of_property_read_u32(node, "reg", &res);
+	if (ret < 0)
+		return ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/* ADC based measurements are optional */
+	chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
+	if (IS_ERR(chip->adc)) {
+		ret = PTR_ERR(chip->adc);
+		chip->adc = NULL;
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	}
+
+	chip->base = res;
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not read type\n");
+		return ret;
+	}
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not read subtype\n");
+		return ret;
+	}
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not read dig_major\n");
+		return ret;
+	}
+
+	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
+				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
+		dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
+			type, subtype);
+		return -ENODEV;
+	}
+
+	chip->subtype = subtype;
+	if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
+		chip->temp_map = &temp_map_gen2_v1;
+	else
+		chip->temp_map = &temp_map_gen1;
+
+	/*
+	 * Register the sensor before initializing the hardware to be able to
+	 * read the trip points. get_temp() returns the default temperature
+	 * before the hardware initialization is completed.
+	 */
+	chip->tz_dev = devm_thermal_of_zone_register(
+		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
+	if (IS_ERR(chip->tz_dev)) {
+		dev_err(&pdev->dev, "failed to register sensor\n");
+		return PTR_ERR(chip->tz_dev);
+	}
+
+	ret = qpnp_tm_init(chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "init failed\n");
+		return ret;
+	}
+
+	if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
+		dev_warn(&pdev->dev,
+			 "Failed to add hwmon sysfs attributes\n");
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
+					IRQF_ONESHOT, node->name, chip);
+	if (ret < 0)
+		return ret;
+
+	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	return 0;
+}
+
+static const struct of_device_id qpnp_tm_match_table[] = {
+	{ .compatible = "qcom,spmi-temp-alarm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qpnp_tm_match_table);
+
+static struct platform_driver qpnp_tm_driver = {
+	.driver = {
+		.name = "spmi-temp-alarm",
+		.of_match_table = qpnp_tm_match_table,
+	},
+	.probe  = qpnp_tm_probe,
+};
+module_platform_driver(qpnp_tm_driver);
+
+MODULE_ALIAS("platform:spmi-temp-alarm");
+MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
new file mode 100644
index 000000000..67c1748cd
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include "tsens.h"
+
+#define CONFIG_ADDR		0x3640
+#define CONFIG_ADDR_8660	0x3620
+/* CONFIG_ADDR bitmasks */
+#define CONFIG			0x9b
+#define CONFIG_MASK		0xf
+#define CONFIG_8660		1
+#define CONFIG_SHIFT_8660	28
+#define CONFIG_MASK_8660	(3 << CONFIG_SHIFT_8660)
+
+#define CNTL_ADDR		0x3620
+/* CNTL_ADDR bitmasks */
+#define EN			BIT(0)
+#define SW_RST			BIT(1)
+
+#define MEASURE_PERIOD		BIT(18)
+#define SLP_CLK_ENA		BIT(26)
+#define SLP_CLK_ENA_8660	BIT(24)
+#define SENSOR0_SHIFT		3
+
+#define THRESHOLD_ADDR		0x3624
+
+#define INT_STATUS_ADDR		0x363c
+
+#define S0_STATUS_OFF		0x3628
+#define S1_STATUS_OFF		0x362c
+#define S2_STATUS_OFF		0x3630
+#define S3_STATUS_OFF		0x3634
+#define S4_STATUS_OFF		0x3638
+#define S5_STATUS_OFF		0x3664  /* Sensors 5-10 found on apq8064/msm8960 */
+#define S6_STATUS_OFF		0x3668
+#define S7_STATUS_OFF		0x366c
+#define S8_STATUS_OFF		0x3670
+#define S9_STATUS_OFF		0x3674
+#define S10_STATUS_OFF		0x3678
+
+/* Original slope - 350 to compensate mC to C inaccuracy */
+static u32 tsens_msm8960_slope[] = {
+			826, 826, 804, 826,
+			761, 782, 782, 849,
+			782, 849, 782
+			};
+
+static int suspend_8960(struct tsens_priv *priv)
+{
+	int ret;
+	unsigned int mask;
+	struct regmap *map = priv->tm_map;
+
+	ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);
+	if (ret)
+		return ret;
+
+	if (priv->num_sensors > 1)
+		mask = SLP_CLK_ENA | EN;
+	else
+		mask = SLP_CLK_ENA_8660 | EN;
+
+	ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int resume_8960(struct tsens_priv *priv)
+{
+	int ret;
+	struct regmap *map = priv->tm_map;
+
+	ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
+	if (ret)
+		return ret;
+
+	/*
+	 * Separate CONFIG restore is not needed only for 8660 as
+	 * config is part of CTRL Addr and its restored as such
+	 */
+	if (priv->num_sensors > 1) {
+		ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int enable_8960(struct tsens_priv *priv, int id)
+{
+	int ret;
+	u32 reg, mask = BIT(id);
+
+	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
+	if (ret)
+		return ret;
+
+	/* HARDWARE BUG:
+	 * On platforms with more than 6 sensors, all remaining sensors
+	 * must be enabled together, otherwise undefined results are expected.
+	 * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
+	 * all the sensors are enabled in one step hence this bug is not
+	 * triggered.
+	 */
+	if (id > 5)
+		mask = GENMASK(10, 6);
+
+	mask <<= SENSOR0_SHIFT;
+
+	/* Sensors already enabled. Skip. */
+	if ((reg & mask) == mask)
+		return 0;
+
+	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
+	if (ret)
+		return ret;
+
+	reg |= MEASURE_PERIOD;
+
+	if (priv->num_sensors > 1)
+		reg |= mask | SLP_CLK_ENA | EN;
+	else
+		reg |= mask | SLP_CLK_ENA_8660 | EN;
+
+	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void disable_8960(struct tsens_priv *priv)
+{
+	int ret;
+	u32 reg_cntl;
+	u32 mask;
+
+	mask = GENMASK(priv->num_sensors - 1, 0);
+	mask <<= SENSOR0_SHIFT;
+	mask |= EN;
+
+	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg_cntl);
+	if (ret)
+		return;
+
+	reg_cntl &= ~mask;
+
+	if (priv->num_sensors > 1)
+		reg_cntl &= ~SLP_CLK_ENA;
+	else
+		reg_cntl &= ~SLP_CLK_ENA_8660;
+
+	regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+}
+
+static int calibrate_8960(struct tsens_priv *priv)
+{
+	int i;
+	char *data;
+	u32 p1[11];
+
+	data = qfprom_read(priv->dev, "calib");
+	if (IS_ERR(data))
+		data = qfprom_read(priv->dev, "calib_backup");
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		p1[i] = data[i];
+		priv->sensor[i].slope = tsens_msm8960_slope[i];
+	}
+
+	compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
+
+	kfree(data);
+
+	return 0;
+}
+
+static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* No VERSION information */
+
+	/* CNTL */
+	[TSENS_EN]     = REG_FIELD(CNTL_ADDR,  0, 0),
+	[TSENS_SW_RST] = REG_FIELD(CNTL_ADDR,  1, 1),
+	/* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
+	[SENSOR_EN]    = REG_FIELD(CNTL_ADDR,  3, 7),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	/* NO INTERRUPT ENABLE */
+
+	/* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
+	[LOW_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR,  0,  7),
+	[UP_THRESH_0]    = REG_FIELD(THRESHOLD_ADDR,  8, 15),
+	/* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
+	 * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
+	 * MIN_THRESH_0 -> CRIT_THRESH_1
+	 * MAX_THRESH_0 -> CRIT_THRESH_0
+	 */
+	[CRIT_THRESH_1]   = REG_FIELD(THRESHOLD_ADDR, 16, 23),
+	[CRIT_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR, 24, 31),
+
+	/* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
+	/* 1 == clear, 0 == normal operation */
+	[LOW_INT_CLEAR_0]   = REG_FIELD(CNTL_ADDR,  9,  9),
+	[UP_INT_CLEAR_0]    = REG_FIELD(CNTL_ADDR, 10, 10),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on 8960 */
+
+	/* Sn_STATUS */
+	[LAST_TEMP_0]  = REG_FIELD(S0_STATUS_OFF,  0,  7),
+	[LAST_TEMP_1]  = REG_FIELD(S1_STATUS_OFF,  0,  7),
+	[LAST_TEMP_2]  = REG_FIELD(S2_STATUS_OFF,  0,  7),
+	[LAST_TEMP_3]  = REG_FIELD(S3_STATUS_OFF,  0,  7),
+	[LAST_TEMP_4]  = REG_FIELD(S4_STATUS_OFF,  0,  7),
+	[LAST_TEMP_5]  = REG_FIELD(S5_STATUS_OFF,  0,  7),
+	[LAST_TEMP_6]  = REG_FIELD(S6_STATUS_OFF,  0,  7),
+	[LAST_TEMP_7]  = REG_FIELD(S7_STATUS_OFF,  0,  7),
+	[LAST_TEMP_8]  = REG_FIELD(S8_STATUS_OFF,  0,  7),
+	[LAST_TEMP_9]  = REG_FIELD(S9_STATUS_OFF,  0,  7),
+	[LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0,  7),
+
+	/* No VALID field on 8960 */
+	/* TSENS_INT_STATUS bits: 1 == threshold violated */
+	[MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
+	[LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
+	[UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
+	/* No CRITICAL field on 8960 */
+	[MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
+};
+
+static const struct tsens_ops ops_8960 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8960,
+	.get_temp	= get_temp_common,
+	.enable		= enable_8960,
+	.disable	= disable_8960,
+	.suspend	= suspend_8960,
+	.resume		= resume_8960,
+};
+
+static struct tsens_features tsens_8960_feat = {
+	.ver_major	= VER_0,
+	.crit_int	= 0,
+	.adc		= 1,
+	.srot_split	= 0,
+	.max_sensors	= 11,
+};
+
+struct tsens_plat_data data_8960 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8960,
+	.feat		= &tsens_8960_feat,
+	.fields		= tsens_8960_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
new file mode 100644
index 000000000..8d036727b
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* ----- SROT ------ */
+#define SROT_CTRL_OFF 0x0000
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF				0x0000
+#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF	0x0004
+#define TM_Sn_STATUS_OFF			0x0030
+#define TM_TRDY_OFF				0x005c
+
+/* eeprom layout data for 8916 */
+#define MSM8916_BASE0_MASK	0x0000007f
+#define MSM8916_BASE1_MASK	0xfe000000
+#define MSM8916_BASE0_SHIFT	0
+#define MSM8916_BASE1_SHIFT	25
+
+#define MSM8916_S0_P1_MASK	0x00000f80
+#define MSM8916_S1_P1_MASK	0x003e0000
+#define MSM8916_S2_P1_MASK	0xf8000000
+#define MSM8916_S3_P1_MASK	0x000003e0
+#define MSM8916_S4_P1_MASK	0x000f8000
+
+#define MSM8916_S0_P2_MASK	0x0001f000
+#define MSM8916_S1_P2_MASK	0x07c00000
+#define MSM8916_S2_P2_MASK	0x0000001f
+#define MSM8916_S3_P2_MASK	0x00007c00
+#define MSM8916_S4_P2_MASK	0x01f00000
+
+#define MSM8916_S0_P1_SHIFT	7
+#define MSM8916_S1_P1_SHIFT	17
+#define MSM8916_S2_P1_SHIFT	27
+#define MSM8916_S3_P1_SHIFT	5
+#define MSM8916_S4_P1_SHIFT	15
+
+#define MSM8916_S0_P2_SHIFT	12
+#define MSM8916_S1_P2_SHIFT	22
+#define MSM8916_S2_P2_SHIFT	0
+#define MSM8916_S3_P2_SHIFT	10
+#define MSM8916_S4_P2_SHIFT	20
+
+#define MSM8916_CAL_SEL_MASK	0xe0000000
+#define MSM8916_CAL_SEL_SHIFT	29
+
+/* eeprom layout data for 8939 */
+#define MSM8939_BASE0_MASK	0x000000ff
+#define MSM8939_BASE1_MASK	0xff000000
+#define MSM8939_BASE0_SHIFT	0
+#define MSM8939_BASE1_SHIFT	24
+
+#define MSM8939_S0_P1_MASK	0x000001f8
+#define MSM8939_S1_P1_MASK	0x001f8000
+#define MSM8939_S2_P1_MASK_0_4	0xf8000000
+#define MSM8939_S2_P1_MASK_5	0x00000001
+#define MSM8939_S3_P1_MASK	0x00001f80
+#define MSM8939_S4_P1_MASK	0x01f80000
+#define MSM8939_S5_P1_MASK	0x00003f00
+#define MSM8939_S6_P1_MASK	0x03f00000
+#define MSM8939_S7_P1_MASK	0x0000003f
+#define MSM8939_S8_P1_MASK	0x0003f000
+#define MSM8939_S9_P1_MASK	0x07e00000
+
+#define MSM8939_S0_P2_MASK	0x00007e00
+#define MSM8939_S1_P2_MASK	0x07e00000
+#define MSM8939_S2_P2_MASK	0x0000007e
+#define MSM8939_S3_P2_MASK	0x0007e000
+#define MSM8939_S4_P2_MASK	0x7e000000
+#define MSM8939_S5_P2_MASK	0x000fc000
+#define MSM8939_S6_P2_MASK	0xfc000000
+#define MSM8939_S7_P2_MASK	0x00000fc0
+#define MSM8939_S8_P2_MASK	0x00fc0000
+#define MSM8939_S9_P2_MASK_0_4	0xf8000000
+#define MSM8939_S9_P2_MASK_5	0x00002000
+
+#define MSM8939_S0_P1_SHIFT	3
+#define MSM8939_S1_P1_SHIFT	15
+#define MSM8939_S2_P1_SHIFT_0_4	27
+#define MSM8939_S2_P1_SHIFT_5	0
+#define MSM8939_S3_P1_SHIFT	7
+#define MSM8939_S4_P1_SHIFT	19
+#define MSM8939_S5_P1_SHIFT	8
+#define MSM8939_S6_P1_SHIFT	20
+#define MSM8939_S7_P1_SHIFT	0
+#define MSM8939_S8_P1_SHIFT	12
+#define MSM8939_S9_P1_SHIFT	21
+
+#define MSM8939_S0_P2_SHIFT	9
+#define MSM8939_S1_P2_SHIFT	21
+#define MSM8939_S2_P2_SHIFT	1
+#define MSM8939_S3_P2_SHIFT	13
+#define MSM8939_S4_P2_SHIFT	25
+#define MSM8939_S5_P2_SHIFT	14
+#define MSM8939_S6_P2_SHIFT	26
+#define MSM8939_S7_P2_SHIFT	6
+#define MSM8939_S8_P2_SHIFT	18
+#define MSM8939_S9_P2_SHIFT_0_4	27
+#define MSM8939_S9_P2_SHIFT_5	13
+
+#define MSM8939_CAL_SEL_MASK	0x7
+#define MSM8939_CAL_SEL_SHIFT	0
+
+/* eeprom layout data for 8974 */
+#define BASE1_MASK		0xff
+#define S0_P1_MASK		0x3f00
+#define S1_P1_MASK		0xfc000
+#define S2_P1_MASK		0x3f00000
+#define S3_P1_MASK		0xfc000000
+#define S4_P1_MASK		0x3f
+#define S5_P1_MASK		0xfc0
+#define S6_P1_MASK		0x3f000
+#define S7_P1_MASK		0xfc0000
+#define S8_P1_MASK		0x3f000000
+#define S8_P1_MASK_BKP		0x3f
+#define S9_P1_MASK		0x3f
+#define S9_P1_MASK_BKP		0xfc0
+#define S10_P1_MASK		0xfc0
+#define S10_P1_MASK_BKP		0x3f000
+#define CAL_SEL_0_1		0xc0000000
+#define CAL_SEL_2		0x40000000
+#define CAL_SEL_SHIFT		30
+#define CAL_SEL_SHIFT_2		28
+
+#define S0_P1_SHIFT		8
+#define S1_P1_SHIFT		14
+#define S2_P1_SHIFT		20
+#define S3_P1_SHIFT		26
+#define S5_P1_SHIFT		6
+#define S6_P1_SHIFT		12
+#define S7_P1_SHIFT		18
+#define S8_P1_SHIFT		24
+#define S9_P1_BKP_SHIFT		6
+#define S10_P1_SHIFT		6
+#define S10_P1_BKP_SHIFT	12
+
+#define BASE2_SHIFT		12
+#define BASE2_BKP_SHIFT		18
+#define S0_P2_SHIFT		20
+#define S0_P2_BKP_SHIFT		26
+#define S1_P2_SHIFT		26
+#define S2_P2_BKP_SHIFT		6
+#define S3_P2_SHIFT		6
+#define S3_P2_BKP_SHIFT		12
+#define S4_P2_SHIFT		12
+#define S4_P2_BKP_SHIFT		18
+#define S5_P2_SHIFT		18
+#define S5_P2_BKP_SHIFT		24
+#define S6_P2_SHIFT		24
+#define S7_P2_BKP_SHIFT		6
+#define S8_P2_SHIFT		6
+#define S8_P2_BKP_SHIFT		12
+#define S9_P2_SHIFT		12
+#define S9_P2_BKP_SHIFT		18
+#define S10_P2_SHIFT		18
+#define S10_P2_BKP_SHIFT	24
+
+#define BASE2_MASK		0xff000
+#define BASE2_BKP_MASK		0xfc0000
+#define S0_P2_MASK		0x3f00000
+#define S0_P2_BKP_MASK		0xfc000000
+#define S1_P2_MASK		0xfc000000
+#define S1_P2_BKP_MASK		0x3f
+#define S2_P2_MASK		0x3f
+#define S2_P2_BKP_MASK		0xfc0
+#define S3_P2_MASK		0xfc0
+#define S3_P2_BKP_MASK		0x3f000
+#define S4_P2_MASK		0x3f000
+#define S4_P2_BKP_MASK		0xfc0000
+#define S5_P2_MASK		0xfc0000
+#define S5_P2_BKP_MASK		0x3f000000
+#define S6_P2_MASK		0x3f000000
+#define S6_P2_BKP_MASK		0x3f
+#define S7_P2_MASK		0x3f
+#define S7_P2_BKP_MASK		0xfc0
+#define S8_P2_MASK		0xfc0
+#define S8_P2_BKP_MASK		0x3f000
+#define S9_P2_MASK		0x3f000
+#define S9_P2_BKP_MASK		0xfc0000
+#define S10_P2_MASK		0xfc0000
+#define S10_P2_BKP_MASK		0x3f000000
+
+#define BKP_SEL			0x3
+#define BKP_REDUN_SEL		0xe0000000
+#define BKP_REDUN_SHIFT		29
+
+#define BIT_APPEND		0x3
+
+/* eeprom layout data for mdm9607 */
+#define MDM9607_BASE0_MASK	0x000000ff
+#define MDM9607_BASE1_MASK	0x000ff000
+#define MDM9607_BASE0_SHIFT	0
+#define MDM9607_BASE1_SHIFT	12
+
+#define MDM9607_S0_P1_MASK	0x00003f00
+#define MDM9607_S1_P1_MASK	0x03f00000
+#define MDM9607_S2_P1_MASK	0x0000003f
+#define MDM9607_S3_P1_MASK	0x0003f000
+#define MDM9607_S4_P1_MASK	0x0000003f
+
+#define MDM9607_S0_P2_MASK	0x000fc000
+#define MDM9607_S1_P2_MASK	0xfc000000
+#define MDM9607_S2_P2_MASK	0x00000fc0
+#define MDM9607_S3_P2_MASK	0x00fc0000
+#define MDM9607_S4_P2_MASK	0x00000fc0
+
+#define MDM9607_S0_P1_SHIFT	8
+#define MDM9607_S1_P1_SHIFT	20
+#define MDM9607_S2_P1_SHIFT	0
+#define MDM9607_S3_P1_SHIFT	12
+#define MDM9607_S4_P1_SHIFT	0
+
+#define MDM9607_S0_P2_SHIFT	14
+#define MDM9607_S1_P2_SHIFT	26
+#define MDM9607_S2_P2_SHIFT	6
+#define MDM9607_S3_P2_SHIFT	18
+#define MDM9607_S4_P2_SHIFT	6
+
+#define MDM9607_CAL_SEL_MASK	0x00700000
+#define MDM9607_CAL_SEL_SHIFT	20
+
+static int calibrate_8916(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0, i;
+	u32 p1[5], p2[5];
+	int mode = 0;
+	u32 *qfprom_cdata, *qfprom_csel;
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
+	if (IS_ERR(qfprom_csel)) {
+		kfree(qfprom_cdata);
+		return PTR_ERR(qfprom_csel);
+	}
+
+	mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (qfprom_cdata[1] & MSM8916_BASE1_MASK) >> MSM8916_BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & MSM8916_S0_P2_MASK) >> MSM8916_S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & MSM8916_S1_P2_MASK) >> MSM8916_S1_P2_SHIFT;
+		p2[2] = (qfprom_cdata[1] & MSM8916_S2_P2_MASK) >> MSM8916_S2_P2_SHIFT;
+		p2[3] = (qfprom_cdata[1] & MSM8916_S3_P2_MASK) >> MSM8916_S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = ((base1 + p2[i]) << 3);
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK);
+		p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & MSM8916_S1_P1_MASK) >> MSM8916_S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[0] & MSM8916_S2_P1_MASK) >> MSM8916_S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & MSM8916_S3_P1_MASK) >> MSM8916_S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[1] & MSM8916_S4_P1_MASK) >> MSM8916_S4_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = (((base0) + p1[i]) << 3);
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+	kfree(qfprom_csel);
+
+	return 0;
+}
+
+static int calibrate_8939(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0, i;
+	u32 p1[10], p2[10];
+	int mode = 0;
+	u32 *qfprom_cdata;
+	u32 cdata[4];
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	/* Mapping between qfprom nvmem and calibration data */
+	cdata[0] = qfprom_cdata[12];
+	cdata[1] = qfprom_cdata[13];
+	cdata[2] = qfprom_cdata[0];
+	cdata[3] = qfprom_cdata[1];
+
+	mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
+		p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
+		p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
+		p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
+		p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
+		p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
+		p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
+		p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
+		p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
+		p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = (base1 + p2[i]) << 2;
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT;
+		p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
+		p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
+		p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
+		p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5;
+		p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
+		p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
+		p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
+		p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
+		p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
+		p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = ((base0) + p1[i]) << 2;
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
+static int calibrate_8974(struct tsens_priv *priv)
+{
+	int base1 = 0, base2 = 0, i;
+	u32 p1[11], p2[11];
+	int mode = 0;
+	u32 *calib, *bkp;
+	u32 calib_redun_sel;
+
+	calib = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(calib))
+		return PTR_ERR(calib);
+
+	bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
+	if (IS_ERR(bkp)) {
+		kfree(calib);
+		return PTR_ERR(bkp);
+	}
+
+	calib_redun_sel =  bkp[1] & BKP_REDUN_SEL;
+	calib_redun_sel >>= BKP_REDUN_SHIFT;
+
+	if (calib_redun_sel == BKP_SEL) {
+		mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+		mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+		switch (mode) {
+		case TWO_PT_CALIB:
+			base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT;
+			p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT;
+			p2[1] = (bkp[3] & S1_P2_BKP_MASK);
+			p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT;
+			p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT;
+			p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT;
+			p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT;
+			p2[6] = (calib[5] & S6_P2_BKP_MASK);
+			p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT;
+			p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
+			p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
+			p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
+			fallthrough;
+		case ONE_PT_CALIB:
+		case ONE_PT_CALIB2:
+			base1 = bkp[0] & BASE1_MASK;
+			p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+			p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+			p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+			p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+			p1[4] = (bkp[1] & S4_P1_MASK);
+			p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+			p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+			p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+			p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT;
+			p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT;
+			p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT;
+			break;
+		}
+	} else {
+		mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+		mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+		switch (mode) {
+		case TWO_PT_CALIB:
+			base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT;
+			p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT;
+			p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT;
+			p2[2] = (calib[3] & S2_P2_MASK);
+			p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT;
+			p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT;
+			p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT;
+			p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT;
+			p2[7] = (calib[4] & S7_P2_MASK);
+			p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
+			p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
+			p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
+			fallthrough;
+		case ONE_PT_CALIB:
+		case ONE_PT_CALIB2:
+			base1 = calib[0] & BASE1_MASK;
+			p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+			p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+			p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+			p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+			p1[4] = (calib[1] & S4_P1_MASK);
+			p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+			p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+			p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+			p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT;
+			p1[9] = (calib[2] & S9_P1_MASK);
+			p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT;
+			break;
+		}
+	}
+
+	switch (mode) {
+	case ONE_PT_CALIB:
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] += (base1 << 2) | BIT_APPEND;
+		break;
+	case TWO_PT_CALIB:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p2[i] += base2;
+			p2[i] <<= 2;
+			p2[i] |= BIT_APPEND;
+		}
+		fallthrough;
+	case ONE_PT_CALIB2:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] += base1;
+			p1[i] <<= 2;
+			p1[i] |= BIT_APPEND;
+		}
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = 780;
+		p1[0] = 502;
+		p1[1] = 509;
+		p1[2] = 503;
+		p1[3] = 509;
+		p1[4] = 505;
+		p1[5] = 509;
+		p1[6] = 507;
+		p1[7] = 510;
+		p1[8] = 508;
+		p1[9] = 509;
+		p1[10] = 508;
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(calib);
+	kfree(bkp);
+
+	return 0;
+}
+
+static int calibrate_9607(struct tsens_priv *priv)
+{
+	int base, i;
+	u32 p1[5], p2[5];
+	int mode = 0;
+	u32 *qfprom_cdata;
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	mode = (qfprom_cdata[2] & MDM9607_CAL_SEL_MASK) >> MDM9607_CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base = (qfprom_cdata[2] & MDM9607_BASE1_MASK) >> MDM9607_BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & MDM9607_S0_P2_MASK) >> MDM9607_S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & MDM9607_S1_P2_MASK) >> MDM9607_S1_P2_SHIFT;
+		p2[2] = (qfprom_cdata[1] & MDM9607_S2_P2_MASK) >> MDM9607_S2_P2_SHIFT;
+		p2[3] = (qfprom_cdata[1] & MDM9607_S3_P2_MASK) >> MDM9607_S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[2] & MDM9607_S4_P2_MASK) >> MDM9607_S4_P2_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = ((base + p2[i]) << 2);
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base = (qfprom_cdata[0] & MDM9607_BASE0_MASK);
+		p1[0] = (qfprom_cdata[0] & MDM9607_S0_P1_MASK) >> MDM9607_S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & MDM9607_S1_P1_MASK) >> MDM9607_S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[1] & MDM9607_S2_P1_MASK) >> MDM9607_S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & MDM9607_S3_P1_MASK) >> MDM9607_S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[2] & MDM9607_S4_P1_MASK) >> MDM9607_S4_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = ((base + p1[i]) << 2);
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
+static int __init init_8939(struct tsens_priv *priv) {
+	priv->sensor[0].slope = 2911;
+	priv->sensor[1].slope = 2789;
+	priv->sensor[2].slope = 2906;
+	priv->sensor[3].slope = 2763;
+	priv->sensor[4].slope = 2922;
+	priv->sensor[5].slope = 2867;
+	priv->sensor[6].slope = 2833;
+	priv->sensor[7].slope = 2838;
+	priv->sensor[8].slope = 2840;
+	/* priv->sensor[9].slope = 2852; */
+
+	return init_common(priv);
+}
+
+/* v0.1: 8916, 8939, 8974, 9607 */
+
+static struct tsens_features tsens_v0_1_feat = {
+	.ver_major	= VER_0_1,
+	.crit_int	= 0,
+	.adc		= 1,
+	.srot_split	= 1,
+	.max_sensors	= 11,
+};
+
+static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* No VERSION information */
+
+	/* CTRL_OFFSET */
+	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF, 0,  0),
+	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1,  1),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+
+	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on v0.1 */
+
+	/* Sn_STATUS */
+	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
+	/* No VALID field on v0.1 */
+	/* xxx_STATUS bits: 1 == threshold violated */
+	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
+	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
+	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
+	/* No CRITICAL field on v0.1 */
+	REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS,   TM_Sn_STATUS_OFF, 13, 13),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
+
+static const struct tsens_ops ops_8916 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8916,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8916 = {
+	.num_sensors	= 5,
+	.ops		= &ops_8916,
+	.hw_ids		= (unsigned int []){0, 1, 2, 4, 5 },
+
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
+static const struct tsens_ops ops_8939 = {
+	.init		= init_8939,
+	.calibrate	= calibrate_8939,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8939 = {
+	.num_sensors	= 9,
+	.ops		= &ops_8939,
+	.hw_ids		= (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ },
+
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
+static const struct tsens_ops ops_8974 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8974,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8974 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8974,
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
+static const struct tsens_ops ops_9607 = {
+	.init		= init_common,
+	.calibrate	= calibrate_9607,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_9607 = {
+	.num_sensors	= 5,
+	.ops		= &ops_9607,
+	.hw_ids		= (unsigned int []){ 0, 1, 2, 3, 4 },
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
new file mode 100644
index 000000000..faa4576fa
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include "tsens.h"
+
+/* ----- SROT ------ */
+#define SROT_HW_VER_OFF	0x0000
+#define SROT_CTRL_OFF		0x0004
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF				0x0000
+#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF	0x0004
+#define TM_Sn_STATUS_OFF			0x0044
+#define TM_TRDY_OFF				0x0084
+#define TM_HIGH_LOW_INT_STATUS_OFF		0x0088
+#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF	0x0090
+
+/* eeprom layout data for msm8956/76 (v1) */
+#define MSM8976_BASE0_MASK	0xff
+#define MSM8976_BASE1_MASK	0xff
+#define MSM8976_BASE1_SHIFT	8
+
+#define MSM8976_S0_P1_MASK	0x3f00
+#define MSM8976_S1_P1_MASK	0x3f00000
+#define MSM8976_S2_P1_MASK	0x3f
+#define MSM8976_S3_P1_MASK	0x3f000
+#define MSM8976_S4_P1_MASK	0x3f00
+#define MSM8976_S5_P1_MASK	0x3f00000
+#define MSM8976_S6_P1_MASK	0x3f
+#define MSM8976_S7_P1_MASK	0x3f000
+#define MSM8976_S8_P1_MASK	0x1f8
+#define MSM8976_S9_P1_MASK	0x1f8000
+#define MSM8976_S10_P1_MASK	0xf8000000
+#define MSM8976_S10_P1_MASK_1	0x1
+
+#define MSM8976_S0_P2_MASK	0xfc000
+#define MSM8976_S1_P2_MASK	0xfc000000
+#define MSM8976_S2_P2_MASK	0xfc0
+#define MSM8976_S3_P2_MASK	0xfc0000
+#define MSM8976_S4_P2_MASK	0xfc000
+#define MSM8976_S5_P2_MASK	0xfc000000
+#define MSM8976_S6_P2_MASK	0xfc0
+#define MSM8976_S7_P2_MASK	0xfc0000
+#define MSM8976_S8_P2_MASK	0x7e00
+#define MSM8976_S9_P2_MASK	0x7e00000
+#define MSM8976_S10_P2_MASK	0x7e
+
+#define MSM8976_S0_P1_SHIFT	8
+#define MSM8976_S1_P1_SHIFT	20
+#define MSM8976_S2_P1_SHIFT	0
+#define MSM8976_S3_P1_SHIFT	12
+#define MSM8976_S4_P1_SHIFT	8
+#define MSM8976_S5_P1_SHIFT	20
+#define MSM8976_S6_P1_SHIFT	0
+#define MSM8976_S7_P1_SHIFT	12
+#define MSM8976_S8_P1_SHIFT	3
+#define MSM8976_S9_P1_SHIFT	15
+#define MSM8976_S10_P1_SHIFT	27
+#define MSM8976_S10_P1_SHIFT_1	0
+
+#define MSM8976_S0_P2_SHIFT	14
+#define MSM8976_S1_P2_SHIFT	26
+#define MSM8976_S2_P2_SHIFT	6
+#define MSM8976_S3_P2_SHIFT	18
+#define MSM8976_S4_P2_SHIFT	14
+#define MSM8976_S5_P2_SHIFT	26
+#define MSM8976_S6_P2_SHIFT	6
+#define MSM8976_S7_P2_SHIFT	18
+#define MSM8976_S8_P2_SHIFT	9
+#define MSM8976_S9_P2_SHIFT	21
+#define MSM8976_S10_P2_SHIFT	1
+
+#define MSM8976_CAL_SEL_MASK	0x3
+
+/* eeprom layout data for qcs404/405 (v1) */
+#define BASE0_MASK	0x000007f8
+#define BASE1_MASK	0x0007f800
+#define BASE0_SHIFT	3
+#define BASE1_SHIFT	11
+
+#define S0_P1_MASK	0x0000003f
+#define S1_P1_MASK	0x0003f000
+#define S2_P1_MASK	0x3f000000
+#define S3_P1_MASK	0x000003f0
+#define S4_P1_MASK	0x003f0000
+#define S5_P1_MASK	0x0000003f
+#define S6_P1_MASK	0x0003f000
+#define S7_P1_MASK	0x3f000000
+#define S8_P1_MASK	0x000003f0
+#define S9_P1_MASK	0x003f0000
+
+#define S0_P2_MASK	0x00000fc0
+#define S1_P2_MASK	0x00fc0000
+#define S2_P2_MASK_1_0	0xc0000000
+#define S2_P2_MASK_5_2	0x0000000f
+#define S3_P2_MASK	0x0000fc00
+#define S4_P2_MASK	0x0fc00000
+#define S5_P2_MASK	0x00000fc0
+#define S6_P2_MASK	0x00fc0000
+#define S7_P2_MASK_1_0	0xc0000000
+#define S7_P2_MASK_5_2	0x0000000f
+#define S8_P2_MASK	0x0000fc00
+#define S9_P2_MASK	0x0fc00000
+
+#define S0_P1_SHIFT	0
+#define S0_P2_SHIFT	6
+#define S1_P1_SHIFT	12
+#define S1_P2_SHIFT	18
+#define S2_P1_SHIFT	24
+#define S2_P2_SHIFT_1_0	30
+
+#define S2_P2_SHIFT_5_2	0
+#define S3_P1_SHIFT	4
+#define S3_P2_SHIFT	10
+#define S4_P1_SHIFT	16
+#define S4_P2_SHIFT	22
+
+#define S5_P1_SHIFT	0
+#define S5_P2_SHIFT	6
+#define S6_P1_SHIFT	12
+#define S6_P2_SHIFT	18
+#define S7_P1_SHIFT	24
+#define S7_P2_SHIFT_1_0	30
+
+#define S7_P2_SHIFT_5_2	0
+#define S8_P1_SHIFT	4
+#define S8_P2_SHIFT	10
+#define S9_P1_SHIFT	16
+#define S9_P2_SHIFT	22
+
+#define CAL_SEL_MASK	7
+#define CAL_SEL_SHIFT	0
+
+static int calibrate_v1(struct tsens_priv *priv)
+{
+	u32 base0 = 0, base1 = 0;
+	u32 p1[10], p2[10];
+	u32 mode = 0, lsb = 0, msb = 0;
+	u32 *qfprom_cdata;
+	int i;
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+		/* This value is split over two registers, 2 bits and 4 bits */
+		lsb   = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
+		msb   = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
+		p2[2] = msb << 2 | lsb;
+		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+		p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
+		p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
+		/* This value is split over two registers, 2 bits and 4 bits */
+		lsb   = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
+		msb   = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
+		p2[7] = msb << 2 | lsb;
+		p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
+		p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = ((base1 + p2[i]) << 2);
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
+		p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+		p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
+		p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
+		p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
+		p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
+		p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = (((base0) + p1[i]) << 2);
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
+static int calibrate_8976(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0, i;
+	u32 p1[11], p2[11];
+	int mode = 0, tmp = 0;
+	u32 *qfprom_cdata;
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK);
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT;
+		p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT;
+		p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT;
+		p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT;
+		p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT;
+		p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT;
+		p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT;
+		p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT;
+		p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT;
+
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = ((base1 + p2[i]) << 2);
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
+		p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT;
+		p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT;
+		p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT;
+		p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT;
+		p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT;
+		p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT;
+		p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT;
+		tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1;
+		p1[10] |= tmp;
+
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = (((base0) + p1[i]) << 2);
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
+/* v1.x: msm8956,8976,qcs404,405 */
+
+static struct tsens_features tsens_v1_feat = {
+	.ver_major	= VER_1_X,
+	.crit_int	= 0,
+	.adc		= 1,
+	.srot_split	= 1,
+	.max_sensors	= 11,
+};
+
+static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* VERSION */
+	[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
+	[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
+	[VER_STEP]  = REG_FIELD(SROT_HW_VER_OFF,  0, 15),
+	/* CTRL_OFFSET */
+	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF, 0,  0),
+	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1,  1),
+	[SENSOR_EN]    = REG_FIELD(SROT_CTRL_OFF, 3, 13),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	[INT_EN]     = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+
+	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+	[LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  0,  0),
+	[LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  1,  1),
+	[LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  2,  2),
+	[LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  3,  3),
+	[LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  4,  4),
+	[LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  5,  5),
+	[LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  6,  6),
+	[LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  7,  7),
+	[UP_INT_STATUS_0]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  8,  8),
+	[UP_INT_STATUS_1]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  9,  9),
+	[UP_INT_STATUS_2]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10),
+	[UP_INT_STATUS_3]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11),
+	[UP_INT_STATUS_4]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12),
+	[UP_INT_STATUS_5]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13),
+	[UP_INT_STATUS_6]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14),
+	[UP_INT_STATUS_7]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on v1 */
+
+	/* Sn_STATUS */
+	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(VALID,        TM_Sn_STATUS_OFF, 14, 14),
+	/* xxx_STATUS bits: 1 == threshold violated */
+	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
+	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
+	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
+	/* No CRITICAL field on v1.x */
+	REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS,   TM_Sn_STATUS_OFF, 13, 13),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
+
+static int __init init_8956(struct tsens_priv *priv) {
+	priv->sensor[0].slope = 3313;
+	priv->sensor[1].slope = 3275;
+	priv->sensor[2].slope = 3320;
+	priv->sensor[3].slope = 3246;
+	priv->sensor[4].slope = 3279;
+	priv->sensor[5].slope = 3257;
+	priv->sensor[6].slope = 3234;
+	priv->sensor[7].slope = 3269;
+	priv->sensor[8].slope = 3255;
+	priv->sensor[9].slope = 3239;
+	priv->sensor[10].slope = 3286;
+
+	return init_common(priv);
+}
+
+static const struct tsens_ops ops_generic_v1 = {
+	.init		= init_common,
+	.calibrate	= calibrate_v1,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_tsens_v1 = {
+	.ops		= &ops_generic_v1,
+	.feat		= &tsens_v1_feat,
+	.fields	= tsens_v1_regfields,
+};
+
+static const struct tsens_ops ops_8956 = {
+	.init		= init_8956,
+	.calibrate	= calibrate_8976,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8956 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8956,
+	.feat		= &tsens_v1_feat,
+	.fields		= tsens_v1_regfields,
+};
+
+static const struct tsens_ops ops_8976 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8976,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8976 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8976,
+	.hw_ids		= (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
+	.feat		= &tsens_v1_feat,
+	.fields		= tsens_v1_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
new file mode 100644
index 000000000..b293ed321
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include "tsens.h"
+
+/* ----- SROT ------ */
+#define SROT_HW_VER_OFF	0x0000
+#define SROT_CTRL_OFF		0x0004
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF			0x0004
+#define TM_UPPER_LOWER_INT_STATUS_OFF	0x0008
+#define TM_UPPER_LOWER_INT_CLEAR_OFF	0x000c
+#define TM_UPPER_LOWER_INT_MASK_OFF	0x0010
+#define TM_CRITICAL_INT_STATUS_OFF	0x0014
+#define TM_CRITICAL_INT_CLEAR_OFF	0x0018
+#define TM_CRITICAL_INT_MASK_OFF	0x001c
+#define TM_Sn_UPPER_LOWER_THRESHOLD_OFF 0x0020
+#define TM_Sn_CRITICAL_THRESHOLD_OFF	0x0060
+#define TM_Sn_STATUS_OFF		0x00a0
+#define TM_TRDY_OFF			0x00e4
+#define TM_WDOG_LOG_OFF		0x013c
+
+/* v2.x: 8996, 8998, sdm845 */
+
+static struct tsens_features tsens_v2_feat = {
+	.ver_major	= VER_2_X,
+	.crit_int	= 1,
+	.adc		= 0,
+	.srot_split	= 1,
+	.max_sensors	= 16,
+};
+
+static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* VERSION */
+	[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
+	[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
+	[VER_STEP]  = REG_FIELD(SROT_HW_VER_OFF,  0, 15),
+	/* CTRL_OFF */
+	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF,    0,  0),
+	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF,    1,  1),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	/* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */
+	[INT_EN]  = REG_FIELD(TM_INT_EN_OFF, 0, 2),
+
+	/* TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH,  TM_Sn_UPPER_LOWER_THRESHOLD_OFF,  0,  11),
+	REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH,   TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12,  23),
+	REG_FIELD_FOR_EACH_SENSOR16(CRIT_THRESH, TM_Sn_CRITICAL_THRESHOLD_OFF,     0,  11),
+
+	/* INTERRUPTS [CLEAR/STATUS/MASK] */
+	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS,  TM_UPPER_LOWER_INT_STATUS_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_CLEAR,   TM_UPPER_LOWER_INT_CLEAR_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_MASK,    TM_UPPER_LOWER_INT_MASK_OFF),
+	REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS,  TM_UPPER_LOWER_INT_STATUS_OFF),
+	REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR,   TM_UPPER_LOWER_INT_CLEAR_OFF),
+	REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK,    TM_UPPER_LOWER_INT_MASK_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_STATUS, TM_CRITICAL_INT_STATUS_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_CLEAR,  TM_CRITICAL_INT_CLEAR_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_MASK,   TM_CRITICAL_INT_MASK_OFF),
+
+	/* WATCHDOG on v2.3 or later */
+	[WDOG_BARK_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 31, 31),
+	[WDOG_BARK_CLEAR]  = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF,  31, 31),
+	[WDOG_BARK_MASK]   = REG_FIELD(TM_CRITICAL_INT_MASK_OFF,   31, 31),
+	[CC_MON_STATUS]    = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 30, 30),
+	[CC_MON_CLEAR]     = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF,  30, 30),
+	[CC_MON_MASK]      = REG_FIELD(TM_CRITICAL_INT_MASK_OFF,   30, 30),
+	[WDOG_BARK_COUNT]  = REG_FIELD(TM_WDOG_LOG_OFF,             0,  7),
+
+	/* Sn_STATUS */
+	REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP,       TM_Sn_STATUS_OFF,  0,  11),
+	REG_FIELD_FOR_EACH_SENSOR16(VALID,           TM_Sn_STATUS_OFF, 21,  21),
+	/* xxx_STATUS bits: 1 == threshold violated */
+	REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS,      TM_Sn_STATUS_OFF, 16,  16),
+	REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS,    TM_Sn_STATUS_OFF, 17,  17),
+	REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS,    TM_Sn_STATUS_OFF, 18,  18),
+	REG_FIELD_FOR_EACH_SENSOR16(CRITICAL_STATUS, TM_Sn_STATUS_OFF, 19,  19),
+	REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS,      TM_Sn_STATUS_OFF, 20,  20),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
+
+static const struct tsens_ops ops_generic_v2 = {
+	.init		= init_common,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_tsens_v2 = {
+	.ops		= &ops_generic_v2,
+	.feat		= &tsens_v2_feat,
+	.fields	= tsens_v2_regfields,
+};
+
+/* Kept around for backward compatibility with old msm8996.dtsi */
+struct tsens_plat_data data_8996 = {
+	.num_sensors	= 13,
+	.ops		= &ops_generic_v2,
+	.feat		= &tsens_v2_feat,
+	.fields	= tsens_v2_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
new file mode 100644
index 000000000..252c5ffdd
--- /dev/null
+++ b/drivers/thermal/qcom/tsens.c
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, 2020, Linaro Ltd.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include "../thermal_hwmon.h"
+#include "tsens.h"
+
+/**
+ * struct tsens_irq_data - IRQ status and temperature violations
+ * @up_viol:        upper threshold violated
+ * @up_thresh:      upper threshold temperature value
+ * @up_irq_mask:    mask register for upper threshold irqs
+ * @up_irq_clear:   clear register for uppper threshold irqs
+ * @low_viol:       lower threshold violated
+ * @low_thresh:     lower threshold temperature value
+ * @low_irq_mask:   mask register for lower threshold irqs
+ * @low_irq_clear:  clear register for lower threshold irqs
+ * @crit_viol:      critical threshold violated
+ * @crit_thresh:    critical threshold temperature value
+ * @crit_irq_mask:  mask register for critical threshold irqs
+ * @crit_irq_clear: clear register for critical threshold irqs
+ *
+ * Structure containing data about temperature threshold settings and
+ * irq status if they were violated.
+ */
+struct tsens_irq_data {
+	u32 up_viol;
+	int up_thresh;
+	u32 up_irq_mask;
+	u32 up_irq_clear;
+	u32 low_viol;
+	int low_thresh;
+	u32 low_irq_mask;
+	u32 low_irq_clear;
+	u32 crit_viol;
+	u32 crit_thresh;
+	u32 crit_irq_mask;
+	u32 crit_irq_clear;
+};
+
+char *qfprom_read(struct device *dev, const char *cname)
+{
+	struct nvmem_cell *cell;
+	ssize_t data;
+	char *ret;
+
+	cell = nvmem_cell_get(dev, cname);
+	if (IS_ERR(cell))
+		return ERR_CAST(cell);
+
+	ret = nvmem_cell_read(cell, &data);
+	nvmem_cell_put(cell);
+
+	return ret;
+}
+
+/*
+ * Use this function on devices where slope and offset calculations
+ * depend on calibration data read from qfprom. On others the slope
+ * and offset values are derived from tz->tzp->slope and tz->tzp->offset
+ * resp.
+ */
+void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
+			     u32 *p2, u32 mode)
+{
+	int i;
+	int num, den;
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		dev_dbg(priv->dev,
+			"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
+			__func__, i, p1[i], p2[i]);
+
+		if (!priv->sensor[i].slope)
+			priv->sensor[i].slope = SLOPE_DEFAULT;
+		if (mode == TWO_PT_CALIB) {
+			/*
+			 * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
+			 *	temp_120_degc - temp_30_degc (x2 - x1)
+			 */
+			num = p2[i] - p1[i];
+			num *= SLOPE_FACTOR;
+			den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
+			priv->sensor[i].slope = num / den;
+		}
+
+		priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
+				(CAL_DEGC_PT1 *
+				priv->sensor[i].slope);
+		dev_dbg(priv->dev, "%s: offset:%d\n", __func__,
+			priv->sensor[i].offset);
+	}
+}
+
+static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
+{
+	u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR);
+
+	pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
+	return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);
+}
+
+static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
+{
+	int degc, num, den;
+
+	num = (adc_code * SLOPE_FACTOR) - s->offset;
+	den = s->slope;
+
+	if (num > 0)
+		degc = num + (den / 2);
+	else if (num < 0)
+		degc = num - (den / 2);
+	else
+		degc = num;
+
+	degc /= den;
+
+	return degc;
+}
+
+/**
+ * tsens_hw_to_mC - Return sign-extended temperature in mCelsius.
+ * @s:     Pointer to sensor struct
+ * @field: Index into regmap_field array pointing to temperature data
+ *
+ * This function handles temperature returned in ADC code or deciCelsius
+ * depending on IP version.
+ *
+ * Return: Temperature in milliCelsius on success, a negative errno will
+ * be returned in error cases
+ */
+static int tsens_hw_to_mC(const struct tsens_sensor *s, int field)
+{
+	struct tsens_priv *priv = s->priv;
+	u32 resolution;
+	u32 temp = 0;
+	int ret;
+
+	resolution = priv->fields[LAST_TEMP_0].msb -
+		priv->fields[LAST_TEMP_0].lsb;
+
+	ret = regmap_field_read(priv->rf[field], &temp);
+	if (ret)
+		return ret;
+
+	/* Convert temperature from ADC code to milliCelsius */
+	if (priv->feat->adc)
+		return code_to_degc(temp, s) * 1000;
+
+	/* deciCelsius -> milliCelsius along with sign extension */
+	return sign_extend32(temp, resolution) * 100;
+}
+
+/**
+ * tsens_mC_to_hw - Convert temperature to hardware register value
+ * @s: Pointer to sensor struct
+ * @temp: temperature in milliCelsius to be programmed to hardware
+ *
+ * This function outputs the value to be written to hardware in ADC code
+ * or deciCelsius depending on IP version.
+ *
+ * Return: ADC code or temperature in deciCelsius.
+ */
+static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp)
+{
+	struct tsens_priv *priv = s->priv;
+
+	/* milliC to adc code */
+	if (priv->feat->adc)
+		return degc_to_code(temp / 1000, s);
+
+	/* milliC to deciC */
+	return temp / 100;
+}
+
+static inline enum tsens_ver tsens_version(struct tsens_priv *priv)
+{
+	return priv->feat->ver_major;
+}
+
+static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id,
+				   enum tsens_irq_type irq_type, bool enable)
+{
+	u32 index = 0;
+
+	switch (irq_type) {
+	case UPPER:
+		index = UP_INT_CLEAR_0 + hw_id;
+		break;
+	case LOWER:
+		index = LOW_INT_CLEAR_0 + hw_id;
+		break;
+	case CRITICAL:
+		/* No critical interrupts before v2 */
+		return;
+	}
+	regmap_field_write(priv->rf[index], enable ? 0 : 1);
+}
+
+static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id,
+				   enum tsens_irq_type irq_type, bool enable)
+{
+	u32 index_mask = 0, index_clear = 0;
+
+	/*
+	 * To enable the interrupt flag for a sensor:
+	 *    - clear the mask bit
+	 * To disable the interrupt flag for a sensor:
+	 *    - Mask further interrupts for this sensor
+	 *    - Write 1 followed by 0 to clear the interrupt
+	 */
+	switch (irq_type) {
+	case UPPER:
+		index_mask  = UP_INT_MASK_0 + hw_id;
+		index_clear = UP_INT_CLEAR_0 + hw_id;
+		break;
+	case LOWER:
+		index_mask  = LOW_INT_MASK_0 + hw_id;
+		index_clear = LOW_INT_CLEAR_0 + hw_id;
+		break;
+	case CRITICAL:
+		index_mask  = CRIT_INT_MASK_0 + hw_id;
+		index_clear = CRIT_INT_CLEAR_0 + hw_id;
+		break;
+	}
+
+	if (enable) {
+		regmap_field_write(priv->rf[index_mask], 0);
+	} else {
+		regmap_field_write(priv->rf[index_mask],  1);
+		regmap_field_write(priv->rf[index_clear], 1);
+		regmap_field_write(priv->rf[index_clear], 0);
+	}
+}
+
+/**
+ * tsens_set_interrupt - Set state of an interrupt
+ * @priv: Pointer to tsens controller private data
+ * @hw_id: Hardware ID aka. sensor number
+ * @irq_type: irq_type from enum tsens_irq_type
+ * @enable: false = disable, true = enable
+ *
+ * Call IP-specific function to set state of an interrupt
+ *
+ * Return: void
+ */
+static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id,
+				enum tsens_irq_type irq_type, bool enable)
+{
+	dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__,
+		irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW",
+		enable ? "en" : "dis");
+	if (tsens_version(priv) > VER_1_X)
+		tsens_set_interrupt_v2(priv, hw_id, irq_type, enable);
+	else
+		tsens_set_interrupt_v1(priv, hw_id, irq_type, enable);
+}
+
+/**
+ * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold
+ * @priv: Pointer to tsens controller private data
+ * @hw_id: Hardware ID aka. sensor number
+ * @d: Pointer to irq state data
+ *
+ * Return: 0 if threshold was not violated, 1 if it was violated and negative
+ * errno in case of errors
+ */
+static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id,
+				    struct tsens_irq_data *d)
+{
+	int ret;
+
+	ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol);
+	if (ret)
+		return ret;
+	ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol);
+	if (ret)
+		return ret;
+
+	if (priv->feat->crit_int) {
+		ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id],
+					&d->crit_viol);
+		if (ret)
+			return ret;
+	}
+
+	if (d->up_viol || d->low_viol || d->crit_viol)
+		return 1;
+
+	return 0;
+}
+
+static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
+				const struct tsens_sensor *s,
+				struct tsens_irq_data *d)
+{
+	int ret;
+
+	ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear);
+	if (ret)
+		return ret;
+	ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear);
+	if (ret)
+		return ret;
+	if (tsens_version(priv) > VER_1_X) {
+		ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id],
+					&d->crit_irq_clear);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id],
+					&d->crit_irq_mask);
+		if (ret)
+			return ret;
+
+		d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id);
+	} else {
+		/* No mask register on older TSENS */
+		d->up_irq_mask = 0;
+		d->low_irq_mask = 0;
+		d->crit_irq_clear = 0;
+		d->crit_irq_mask = 0;
+		d->crit_thresh = 0;
+	}
+
+	d->up_thresh  = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id);
+	d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id);
+
+	dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n",
+		hw_id, __func__,
+		(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
+		d->low_viol, d->up_viol, d->crit_viol,
+		d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear,
+		d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask);
+	dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__,
+		(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
+		d->low_thresh, d->up_thresh, d->crit_thresh);
+
+	return 0;
+}
+
+static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
+{
+	if (ver > VER_1_X)
+		return mask & (1 << hw_id);
+
+	/* v1, v0.1 don't have a irq mask register */
+	return 0;
+}
+
+/**
+ * tsens_critical_irq_thread() - Threaded handler for critical interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Check FSM watchdog bark status and clear if needed.
+ * Check all sensors to find ones that violated their critical threshold limits.
+ * Clear and then re-enable the interrupt.
+ *
+ * The level-triggered interrupt might deassert if the temperature returned to
+ * within the threshold limits by the time the handler got scheduled. We
+ * consider the irq to have been handled in that case.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t tsens_critical_irq_thread(int irq, void *data)
+{
+	struct tsens_priv *priv = data;
+	struct tsens_irq_data d;
+	int temp, ret, i;
+	u32 wdog_status, wdog_count;
+
+	if (priv->feat->has_watchdog) {
+		ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS],
+					&wdog_status);
+		if (ret)
+			return ret;
+
+		if (wdog_status) {
+			/* Clear WDOG interrupt */
+			regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1);
+			regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0);
+			ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT],
+						&wdog_count);
+			if (ret)
+				return ret;
+			if (wdog_count)
+				dev_dbg(priv->dev, "%s: watchdog count: %d\n",
+					__func__, wdog_count);
+
+			/* Fall through to handle critical interrupts if any */
+		}
+	}
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		const struct tsens_sensor *s = &priv->sensor[i];
+		u32 hw_id = s->hw_id;
+
+		if (!s->tzd)
+			continue;
+		if (!tsens_threshold_violated(priv, hw_id, &d))
+			continue;
+		ret = get_temp_tsens_valid(s, &temp);
+		if (ret) {
+			dev_err(priv->dev, "[%u] %s: error reading sensor\n",
+				hw_id, __func__);
+			continue;
+		}
+
+		tsens_read_irq_state(priv, hw_id, s, &d);
+		if (d.crit_viol &&
+		    !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) {
+			/* Mask critical interrupts, unused on Linux */
+			tsens_set_interrupt(priv, hw_id, CRITICAL, false);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * tsens_irq_thread - Threaded interrupt handler for uplow interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Check all sensors to find ones that violated their threshold limits. If the
+ * temperature is still outside the limits, call thermal_zone_device_update() to
+ * update the thresholds, else re-enable the interrupts.
+ *
+ * The level-triggered interrupt might deassert if the temperature returned to
+ * within the threshold limits by the time the handler got scheduled. We
+ * consider the irq to have been handled in that case.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t tsens_irq_thread(int irq, void *data)
+{
+	struct tsens_priv *priv = data;
+	struct tsens_irq_data d;
+	bool enable = true, disable = false;
+	unsigned long flags;
+	int temp, ret, i;
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		bool trigger = false;
+		const struct tsens_sensor *s = &priv->sensor[i];
+		u32 hw_id = s->hw_id;
+
+		if (!s->tzd)
+			continue;
+		if (!tsens_threshold_violated(priv, hw_id, &d))
+			continue;
+		ret = get_temp_tsens_valid(s, &temp);
+		if (ret) {
+			dev_err(priv->dev, "[%u] %s: error reading sensor\n",
+				hw_id, __func__);
+			continue;
+		}
+
+		spin_lock_irqsave(&priv->ul_lock, flags);
+
+		tsens_read_irq_state(priv, hw_id, s, &d);
+
+		if (d.up_viol &&
+		    !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) {
+			tsens_set_interrupt(priv, hw_id, UPPER, disable);
+			if (d.up_thresh > temp) {
+				dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
+					hw_id, __func__);
+				tsens_set_interrupt(priv, hw_id, UPPER, enable);
+			} else {
+				trigger = true;
+				/* Keep irq masked */
+			}
+		} else if (d.low_viol &&
+			   !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) {
+			tsens_set_interrupt(priv, hw_id, LOWER, disable);
+			if (d.low_thresh < temp) {
+				dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
+					hw_id, __func__);
+				tsens_set_interrupt(priv, hw_id, LOWER, enable);
+			} else {
+				trigger = true;
+				/* Keep irq masked */
+			}
+		}
+
+		spin_unlock_irqrestore(&priv->ul_lock, flags);
+
+		if (trigger) {
+			dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
+				hw_id, __func__, temp);
+			thermal_zone_device_update(s->tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+		} else {
+			dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
+				hw_id, __func__, temp);
+		}
+
+		if (tsens_version(priv) < VER_0_1) {
+			/* Constraint: There is only 1 interrupt control register for all
+			 * 11 temperature sensor. So monitoring more than 1 sensor based
+			 * on interrupts will yield inconsistent result. To overcome this
+			 * issue we will monitor only sensor 0 which is the master sensor.
+			 */
+			break;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct tsens_sensor *s = tz->devdata;
+	struct tsens_priv *priv = s->priv;
+	struct device *dev = priv->dev;
+	struct tsens_irq_data d;
+	unsigned long flags;
+	int high_val, low_val, cl_high, cl_low;
+	u32 hw_id = s->hw_id;
+
+	if (tsens_version(priv) < VER_0_1) {
+		/* Pre v0.1 IP had a single register for each type of interrupt
+		 * and thresholds
+		 */
+		hw_id = 0;
+	}
+
+	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
+		hw_id, __func__, low, high);
+
+	cl_high = clamp_val(high, -40000, 120000);
+	cl_low  = clamp_val(low, -40000, 120000);
+
+	high_val = tsens_mC_to_hw(s, cl_high);
+	low_val  = tsens_mC_to_hw(s, cl_low);
+
+	spin_lock_irqsave(&priv->ul_lock, flags);
+
+	tsens_read_irq_state(priv, hw_id, s, &d);
+
+	/* Write the new thresholds and clear the status */
+	regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val);
+	regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val);
+	tsens_set_interrupt(priv, hw_id, LOWER, true);
+	tsens_set_interrupt(priv, hw_id, UPPER, true);
+
+	spin_unlock_irqrestore(&priv->ul_lock, flags);
+
+	dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
+		hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
+
+	return 0;
+}
+
+static int tsens_enable_irq(struct tsens_priv *priv)
+{
+	int ret;
+	int val = tsens_version(priv) > VER_1_X ? 7 : 1;
+
+	ret = regmap_field_write(priv->rf[INT_EN], val);
+	if (ret < 0)
+		dev_err(priv->dev, "%s: failed to enable interrupts\n",
+			__func__);
+
+	return ret;
+}
+
+static void tsens_disable_irq(struct tsens_priv *priv)
+{
+	regmap_field_write(priv->rf[INT_EN], 0);
+}
+
+int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
+{
+	struct tsens_priv *priv = s->priv;
+	int hw_id = s->hw_id;
+	u32 temp_idx = LAST_TEMP_0 + hw_id;
+	u32 valid_idx = VALID_0 + hw_id;
+	u32 valid;
+	int ret;
+
+	/* VER_0 doesn't have VALID bit */
+	if (tsens_version(priv) == VER_0)
+		goto get_temp;
+
+	/* Valid bit is 0 for 6 AHB clock cycles.
+	 * At 19.2MHz, 1 AHB clock is ~60ns.
+	 * We should enter this loop very, very rarely.
+	 * Wait 1 us since it's the min of poll_timeout macro.
+	 * Old value was 400 ns.
+	 */
+	ret = regmap_field_read_poll_timeout(priv->rf[valid_idx], valid,
+					     valid, 1, 20 * USEC_PER_MSEC);
+	if (ret)
+		return ret;
+
+get_temp:
+	/* Valid bit is set, OK to read the temperature */
+	*temp = tsens_hw_to_mC(s, temp_idx);
+
+	return 0;
+}
+
+int get_temp_common(const struct tsens_sensor *s, int *temp)
+{
+	struct tsens_priv *priv = s->priv;
+	int hw_id = s->hw_id;
+	int last_temp = 0, ret, trdy;
+	unsigned long timeout;
+
+	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+	do {
+		if (tsens_version(priv) == VER_0) {
+			ret = regmap_field_read(priv->rf[TRDY], &trdy);
+			if (ret)
+				return ret;
+			if (!trdy)
+				continue;
+		}
+
+		ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
+		if (ret)
+			return ret;
+
+		*temp = code_to_degc(last_temp, s) * 1000;
+
+		return 0;
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int dbg_sensors_show(struct seq_file *s, void *data)
+{
+	struct platform_device *pdev = s->private;
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	seq_printf(s, "max: %2d\nnum: %2d\n\n",
+		   priv->feat->max_sensors, priv->num_sensors);
+
+	seq_puts(s, "      id    slope   offset\n--------------------------\n");
+	for (i = 0;  i < priv->num_sensors; i++) {
+		seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id,
+			   priv->sensor[i].slope, priv->sensor[i].offset);
+	}
+
+	return 0;
+}
+
+static int dbg_version_show(struct seq_file *s, void *data)
+{
+	struct platform_device *pdev = s->private;
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+	u32 maj_ver, min_ver, step_ver;
+	int ret;
+
+	if (tsens_version(priv) > VER_0_1) {
+		ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[VER_STEP], &step_ver);
+		if (ret)
+			return ret;
+		seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
+	} else {
+		seq_puts(s, "0.1.0\n");
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dbg_version);
+DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
+
+static void tsens_debug_init(struct platform_device *pdev)
+{
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+	struct dentry *root, *file;
+
+	root = debugfs_lookup("tsens", NULL);
+	if (!root)
+		priv->debug_root = debugfs_create_dir("tsens", NULL);
+	else
+		priv->debug_root = root;
+
+	file = debugfs_lookup("version", priv->debug_root);
+	if (!file)
+		debugfs_create_file("version", 0444, priv->debug_root,
+				    pdev, &dbg_version_fops);
+
+	/* A directory for each instance of the TSENS IP */
+	priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
+	debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
+}
+#else
+static inline void tsens_debug_init(struct platform_device *pdev) {}
+#endif
+
+static const struct regmap_config tsens_config = {
+	.name		= "tm",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+};
+
+static const struct regmap_config tsens_srot_config = {
+	.name		= "srot",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+};
+
+int __init init_common(struct tsens_priv *priv)
+{
+	void __iomem *tm_base, *srot_base;
+	struct device *dev = priv->dev;
+	u32 ver_minor;
+	struct resource *res;
+	u32 enabled;
+	int ret, i, j;
+	struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
+
+	if (!op)
+		return -EINVAL;
+
+	if (op->num_resources > 1) {
+		/* DT with separate SROT and TM address space */
+		priv->tm_offset = 0;
+		res = platform_get_resource(op, IORESOURCE_MEM, 1);
+		srot_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(srot_base)) {
+			ret = PTR_ERR(srot_base);
+			goto err_put_device;
+		}
+
+		priv->srot_map = devm_regmap_init_mmio(dev, srot_base,
+						       &tsens_srot_config);
+		if (IS_ERR(priv->srot_map)) {
+			ret = PTR_ERR(priv->srot_map);
+			goto err_put_device;
+		}
+	} else {
+		/* old DTs where SROT and TM were in a contiguous 2K block */
+		priv->tm_offset = 0x1000;
+	}
+
+	if (tsens_version(priv) >= VER_0_1) {
+		res = platform_get_resource(op, IORESOURCE_MEM, 0);
+		tm_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(tm_base)) {
+			ret = PTR_ERR(tm_base);
+			goto err_put_device;
+		}
+
+		priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
+	} else { /* VER_0 share the same gcc regs using a syscon */
+		struct device *parent = priv->dev->parent;
+
+		if (parent)
+			priv->tm_map = syscon_node_to_regmap(parent->of_node);
+	}
+
+	if (IS_ERR_OR_NULL(priv->tm_map)) {
+		if (!priv->tm_map)
+			ret = -ENODEV;
+		else
+			ret = PTR_ERR(priv->tm_map);
+		goto err_put_device;
+	}
+
+	/* VER_0 have only tm_map */
+	if (!priv->srot_map)
+		priv->srot_map = priv->tm_map;
+
+	if (tsens_version(priv) > VER_0_1) {
+		for (i = VER_MAJOR; i <= VER_STEP; i++) {
+			priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
+							      priv->fields[i]);
+			if (IS_ERR(priv->rf[i])) {
+				ret = PTR_ERR(priv->rf[i]);
+				goto err_put_device;
+			}
+		}
+		ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor);
+		if (ret)
+			goto err_put_device;
+	}
+
+	priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
+						     priv->fields[TSENS_EN]);
+	if (IS_ERR(priv->rf[TSENS_EN])) {
+		ret = PTR_ERR(priv->rf[TSENS_EN]);
+		goto err_put_device;
+	}
+	/* in VER_0 TSENS need to be explicitly enabled */
+	if (tsens_version(priv) == VER_0)
+		regmap_field_write(priv->rf[TSENS_EN], 1);
+
+	ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
+	if (ret)
+		goto err_put_device;
+	if (!enabled) {
+		dev_err(dev, "%s: device not enabled\n", __func__);
+		ret = -ENODEV;
+		goto err_put_device;
+	}
+
+	priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
+						      priv->fields[SENSOR_EN]);
+	if (IS_ERR(priv->rf[SENSOR_EN])) {
+		ret = PTR_ERR(priv->rf[SENSOR_EN]);
+		goto err_put_device;
+	}
+	priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map,
+						   priv->fields[INT_EN]);
+	if (IS_ERR(priv->rf[INT_EN])) {
+		ret = PTR_ERR(priv->rf[INT_EN]);
+		goto err_put_device;
+	}
+
+	priv->rf[TSENS_SW_RST] =
+		devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
+	if (IS_ERR(priv->rf[TSENS_SW_RST])) {
+		ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
+		goto err_put_device;
+	}
+
+	priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
+	if (IS_ERR(priv->rf[TRDY])) {
+		ret = PTR_ERR(priv->rf[TRDY]);
+		goto err_put_device;
+	}
+
+	/* This loop might need changes if enum regfield_ids is reordered */
+	for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
+		for (i = 0; i < priv->feat->max_sensors; i++) {
+			int idx = j + i;
+
+			priv->rf[idx] = devm_regmap_field_alloc(dev,
+								priv->tm_map,
+								priv->fields[idx]);
+			if (IS_ERR(priv->rf[idx])) {
+				ret = PTR_ERR(priv->rf[idx]);
+				goto err_put_device;
+			}
+		}
+	}
+
+	if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
+		/* Loop might need changes if enum regfield_ids is reordered */
+		for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
+			for (i = 0; i < priv->feat->max_sensors; i++) {
+				int idx = j + i;
+
+				priv->rf[idx] =
+					devm_regmap_field_alloc(dev,
+								priv->tm_map,
+								priv->fields[idx]);
+				if (IS_ERR(priv->rf[idx])) {
+					ret = PTR_ERR(priv->rf[idx]);
+					goto err_put_device;
+				}
+			}
+		}
+	}
+
+	if (tsens_version(priv) > VER_1_X &&  ver_minor > 2) {
+		/* Watchdog is present only on v2.3+ */
+		priv->feat->has_watchdog = 1;
+		for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) {
+			priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map,
+							      priv->fields[i]);
+			if (IS_ERR(priv->rf[i])) {
+				ret = PTR_ERR(priv->rf[i]);
+				goto err_put_device;
+			}
+		}
+		/*
+		 * Watchdog is already enabled, unmask the bark.
+		 * Disable cycle completion monitoring
+		 */
+		regmap_field_write(priv->rf[WDOG_BARK_MASK], 0);
+		regmap_field_write(priv->rf[CC_MON_MASK], 1);
+	}
+
+	spin_lock_init(&priv->ul_lock);
+
+	/* VER_0 interrupt doesn't need to be enabled */
+	if (tsens_version(priv) >= VER_0_1)
+		tsens_enable_irq(priv);
+
+	tsens_debug_init(op);
+
+err_put_device:
+	put_device(&op->dev);
+	return ret;
+}
+
+static int tsens_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct tsens_sensor *s = tz->devdata;
+	struct tsens_priv *priv = s->priv;
+
+	return priv->ops->get_temp(s, temp);
+}
+
+static int  __maybe_unused tsens_suspend(struct device *dev)
+{
+	struct tsens_priv *priv = dev_get_drvdata(dev);
+
+	if (priv->ops && priv->ops->suspend)
+		return priv->ops->suspend(priv);
+
+	return 0;
+}
+
+static int __maybe_unused tsens_resume(struct device *dev)
+{
+	struct tsens_priv *priv = dev_get_drvdata(dev);
+
+	if (priv->ops && priv->ops->resume)
+		return priv->ops->resume(priv);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
+
+static const struct of_device_id tsens_table[] = {
+	{
+		.compatible = "qcom,ipq8064-tsens",
+		.data = &data_8960,
+	}, {
+		.compatible = "qcom,mdm9607-tsens",
+		.data = &data_9607,
+	}, {
+		.compatible = "qcom,msm8916-tsens",
+		.data = &data_8916,
+	}, {
+		.compatible = "qcom,msm8939-tsens",
+		.data = &data_8939,
+	}, {
+		.compatible = "qcom,msm8956-tsens",
+		.data = &data_8956,
+	}, {
+		.compatible = "qcom,msm8960-tsens",
+		.data = &data_8960,
+	}, {
+		.compatible = "qcom,msm8974-tsens",
+		.data = &data_8974,
+	}, {
+		.compatible = "qcom,msm8976-tsens",
+		.data = &data_8976,
+	}, {
+		.compatible = "qcom,msm8996-tsens",
+		.data = &data_8996,
+	}, {
+		.compatible = "qcom,tsens-v1",
+		.data = &data_tsens_v1,
+	}, {
+		.compatible = "qcom,tsens-v2",
+		.data = &data_tsens_v2,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, tsens_table);
+
+static const struct thermal_zone_device_ops tsens_of_ops = {
+	.get_temp = tsens_get_temp,
+	.set_trips = tsens_set_trips,
+};
+
+static int tsens_register_irq(struct tsens_priv *priv, char *irqname,
+			      irq_handler_t thread_fn)
+{
+	struct platform_device *pdev;
+	int ret, irq;
+
+	pdev = of_find_device_by_node(priv->dev->of_node);
+	if (!pdev)
+		return -ENODEV;
+
+	irq = platform_get_irq_byname(pdev, irqname);
+	if (irq < 0) {
+		ret = irq;
+		/* For old DTs with no IRQ defined */
+		if (irq == -ENXIO)
+			ret = 0;
+	} else {
+		/* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
+		if (tsens_version(priv) == VER_0)
+			ret = devm_request_threaded_irq(&pdev->dev, irq,
+							thread_fn, NULL,
+							IRQF_TRIGGER_RISING,
+							dev_name(&pdev->dev),
+							priv);
+		else
+			ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+							thread_fn, IRQF_ONESHOT,
+							dev_name(&pdev->dev),
+							priv);
+
+		if (ret)
+			dev_err(&pdev->dev, "%s: failed to get irq\n",
+				__func__);
+		else
+			enable_irq_wake(irq);
+	}
+
+	put_device(&pdev->dev);
+	return ret;
+}
+
+static int tsens_register(struct tsens_priv *priv)
+{
+	int i, ret;
+	struct thermal_zone_device *tzd;
+
+	for (i = 0;  i < priv->num_sensors; i++) {
+		priv->sensor[i].priv = priv;
+		tzd = devm_thermal_of_zone_register(priv->dev, priv->sensor[i].hw_id,
+						    &priv->sensor[i],
+						    &tsens_of_ops);
+		if (IS_ERR(tzd))
+			continue;
+		priv->sensor[i].tzd = tzd;
+		if (priv->ops->enable)
+			priv->ops->enable(priv, i);
+
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(priv->dev,
+				 "Failed to add hwmon sysfs attributes\n");
+	}
+
+	/* VER_0 require to set MIN and MAX THRESH
+	 * These 2 regs are set using the:
+	 * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
+	 * - CRIT_THRESH_1 for MIN THRESH hardcoded to   0°C
+	 */
+	if (tsens_version(priv) < VER_0_1) {
+		regmap_field_write(priv->rf[CRIT_THRESH_0],
+				   tsens_mC_to_hw(priv->sensor, 120000));
+
+		regmap_field_write(priv->rf[CRIT_THRESH_1],
+				   tsens_mC_to_hw(priv->sensor, 0));
+	}
+
+	ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
+	if (ret < 0)
+		return ret;
+
+	if (priv->feat->crit_int)
+		ret = tsens_register_irq(priv, "critical",
+					 tsens_critical_irq_thread);
+
+	return ret;
+}
+
+static int tsens_probe(struct platform_device *pdev)
+{
+	int ret, i;
+	struct device *dev;
+	struct device_node *np;
+	struct tsens_priv *priv;
+	const struct tsens_plat_data *data;
+	const struct of_device_id *id;
+	u32 num_sensors;
+
+	if (pdev->dev.of_node)
+		dev = &pdev->dev;
+	else
+		dev = pdev->dev.parent;
+
+	np = dev->of_node;
+
+	id = of_match_node(tsens_table, np);
+	if (id)
+		data = id->data;
+	else
+		data = &data_8960;
+
+	num_sensors = data->num_sensors;
+
+	if (np)
+		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
+
+	if (num_sensors <= 0) {
+		dev_err(dev, "%s: invalid number of sensors\n", __func__);
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev,
+			     struct_size(priv, sensor, num_sensors),
+			     GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->num_sensors = num_sensors;
+	priv->ops = data->ops;
+	for (i = 0;  i < priv->num_sensors; i++) {
+		if (data->hw_ids)
+			priv->sensor[i].hw_id = data->hw_ids[i];
+		else
+			priv->sensor[i].hw_id = i;
+	}
+	priv->feat = data->feat;
+	priv->fields = data->fields;
+
+	platform_set_drvdata(pdev, priv);
+
+	if (!priv->ops || !priv->ops->init || !priv->ops->get_temp)
+		return -EINVAL;
+
+	ret = priv->ops->init(priv);
+	if (ret < 0) {
+		dev_err(dev, "%s: init failed\n", __func__);
+		return ret;
+	}
+
+	if (priv->ops->calibrate) {
+		ret = priv->ops->calibrate(priv);
+		if (ret < 0) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "%s: calibration failed\n", __func__);
+			return ret;
+		}
+	}
+
+	return tsens_register(priv);
+}
+
+static int tsens_remove(struct platform_device *pdev)
+{
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(priv->debug_root);
+	tsens_disable_irq(priv);
+	if (priv->ops->disable)
+		priv->ops->disable(priv);
+
+	return 0;
+}
+
+static struct platform_driver tsens_driver = {
+	.probe = tsens_probe,
+	.remove = tsens_remove,
+	.driver = {
+		.name = "qcom-tsens",
+		.pm	= &tsens_pm_ops,
+		.of_match_table = tsens_table,
+	},
+};
+module_platform_driver(tsens_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QCOM Temperature Sensor driver");
+MODULE_ALIAS("platform:qcom-tsens");
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
new file mode 100644
index 000000000..4f969dd7d
--- /dev/null
+++ b/drivers/thermal/qcom/tsens.h
@@ -0,0 +1,596 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCOM_TSENS_H__
+#define __QCOM_TSENS_H__
+
+#define ONE_PT_CALIB		0x1
+#define ONE_PT_CALIB2		0x2
+#define TWO_PT_CALIB		0x3
+#define CAL_DEGC_PT1		30
+#define CAL_DEGC_PT2		120
+#define SLOPE_FACTOR		1000
+#define SLOPE_DEFAULT		3200
+#define TIMEOUT_US		100
+#define THRESHOLD_MAX_ADC_CODE	0x3ff
+#define THRESHOLD_MIN_ADC_CODE	0x0
+
+#include <linux/interrupt.h>
+#include <linux/thermal.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+struct tsens_priv;
+
+/* IP version numbers in ascending order */
+enum tsens_ver {
+	VER_0 = 0,
+	VER_0_1,
+	VER_1_X,
+	VER_2_X,
+};
+
+enum tsens_irq_type {
+	LOWER,
+	UPPER,
+	CRITICAL,
+};
+
+/**
+ * struct tsens_sensor - data for each sensor connected to the tsens device
+ * @priv: tsens device instance that this sensor is connected to
+ * @tzd: pointer to the thermal zone that this sensor is in
+ * @offset: offset of temperature adjustment curve
+ * @hw_id: HW ID can be used in case of platform-specific IDs
+ * @slope: slope of temperature adjustment curve
+ * @status: 8960-specific variable to track 8960 and 8660 status register offset
+ */
+struct tsens_sensor {
+	struct tsens_priv		*priv;
+	struct thermal_zone_device	*tzd;
+	int				offset;
+	unsigned int			hw_id;
+	int				slope;
+	u32				status;
+};
+
+/**
+ * struct tsens_ops - operations as supported by the tsens device
+ * @init: Function to initialize the tsens device
+ * @calibrate: Function to calibrate the tsens device
+ * @get_temp: Function which returns the temp in millidegC
+ * @enable: Function to enable (clocks/power) tsens device
+ * @disable: Function to disable the tsens device
+ * @suspend: Function to suspend the tsens device
+ * @resume: Function to resume the tsens device
+ */
+struct tsens_ops {
+	/* mandatory callbacks */
+	int (*init)(struct tsens_priv *priv);
+	int (*calibrate)(struct tsens_priv *priv);
+	int (*get_temp)(const struct tsens_sensor *s, int *temp);
+	/* optional callbacks */
+	int (*enable)(struct tsens_priv *priv, int i);
+	void (*disable)(struct tsens_priv *priv);
+	int (*suspend)(struct tsens_priv *priv);
+	int (*resume)(struct tsens_priv *priv);
+};
+
+#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
+	[_name##_##0]  = REG_FIELD(_offset,      _startbit, _stopbit),	\
+	[_name##_##1]  = REG_FIELD(_offset +  4, _startbit, _stopbit), \
+	[_name##_##2]  = REG_FIELD(_offset +  8, _startbit, _stopbit), \
+	[_name##_##3]  = REG_FIELD(_offset + 12, _startbit, _stopbit), \
+	[_name##_##4]  = REG_FIELD(_offset + 16, _startbit, _stopbit), \
+	[_name##_##5]  = REG_FIELD(_offset + 20, _startbit, _stopbit), \
+	[_name##_##6]  = REG_FIELD(_offset + 24, _startbit, _stopbit), \
+	[_name##_##7]  = REG_FIELD(_offset + 28, _startbit, _stopbit), \
+	[_name##_##8]  = REG_FIELD(_offset + 32, _startbit, _stopbit), \
+	[_name##_##9]  = REG_FIELD(_offset + 36, _startbit, _stopbit), \
+	[_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit)
+
+#define REG_FIELD_FOR_EACH_SENSOR16(_name, _offset, _startbit, _stopbit) \
+	[_name##_##0]  = REG_FIELD(_offset,      _startbit, _stopbit),	\
+	[_name##_##1]  = REG_FIELD(_offset +  4, _startbit, _stopbit), \
+	[_name##_##2]  = REG_FIELD(_offset +  8, _startbit, _stopbit), \
+	[_name##_##3]  = REG_FIELD(_offset + 12, _startbit, _stopbit), \
+	[_name##_##4]  = REG_FIELD(_offset + 16, _startbit, _stopbit), \
+	[_name##_##5]  = REG_FIELD(_offset + 20, _startbit, _stopbit), \
+	[_name##_##6]  = REG_FIELD(_offset + 24, _startbit, _stopbit), \
+	[_name##_##7]  = REG_FIELD(_offset + 28, _startbit, _stopbit), \
+	[_name##_##8]  = REG_FIELD(_offset + 32, _startbit, _stopbit), \
+	[_name##_##9]  = REG_FIELD(_offset + 36, _startbit, _stopbit), \
+	[_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit), \
+	[_name##_##11] = REG_FIELD(_offset + 44, _startbit, _stopbit), \
+	[_name##_##12] = REG_FIELD(_offset + 48, _startbit, _stopbit), \
+	[_name##_##13] = REG_FIELD(_offset + 52, _startbit, _stopbit), \
+	[_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \
+	[_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit)
+
+#define REG_FIELD_SPLIT_BITS_0_15(_name, _offset)		\
+	[_name##_##0]  = REG_FIELD(_offset,  0,  0),		\
+	[_name##_##1]  = REG_FIELD(_offset,  1,  1),	\
+	[_name##_##2]  = REG_FIELD(_offset,  2,  2),	\
+	[_name##_##3]  = REG_FIELD(_offset,  3,  3),	\
+	[_name##_##4]  = REG_FIELD(_offset,  4,  4),	\
+	[_name##_##5]  = REG_FIELD(_offset,  5,  5),	\
+	[_name##_##6]  = REG_FIELD(_offset,  6,  6),	\
+	[_name##_##7]  = REG_FIELD(_offset,  7,  7),	\
+	[_name##_##8]  = REG_FIELD(_offset,  8,  8),	\
+	[_name##_##9]  = REG_FIELD(_offset,  9,  9),	\
+	[_name##_##10] = REG_FIELD(_offset, 10, 10),	\
+	[_name##_##11] = REG_FIELD(_offset, 11, 11),	\
+	[_name##_##12] = REG_FIELD(_offset, 12, 12),	\
+	[_name##_##13] = REG_FIELD(_offset, 13, 13),	\
+	[_name##_##14] = REG_FIELD(_offset, 14, 14),	\
+	[_name##_##15] = REG_FIELD(_offset, 15, 15)
+
+#define REG_FIELD_SPLIT_BITS_16_31(_name, _offset)		\
+	[_name##_##0]  = REG_FIELD(_offset, 16, 16),		\
+	[_name##_##1]  = REG_FIELD(_offset, 17, 17),	\
+	[_name##_##2]  = REG_FIELD(_offset, 18, 18),	\
+	[_name##_##3]  = REG_FIELD(_offset, 19, 19),	\
+	[_name##_##4]  = REG_FIELD(_offset, 20, 20),	\
+	[_name##_##5]  = REG_FIELD(_offset, 21, 21),	\
+	[_name##_##6]  = REG_FIELD(_offset, 22, 22),	\
+	[_name##_##7]  = REG_FIELD(_offset, 23, 23),	\
+	[_name##_##8]  = REG_FIELD(_offset, 24, 24),	\
+	[_name##_##9]  = REG_FIELD(_offset, 25, 25),	\
+	[_name##_##10] = REG_FIELD(_offset, 26, 26),	\
+	[_name##_##11] = REG_FIELD(_offset, 27, 27),	\
+	[_name##_##12] = REG_FIELD(_offset, 28, 28),	\
+	[_name##_##13] = REG_FIELD(_offset, 29, 29),	\
+	[_name##_##14] = REG_FIELD(_offset, 30, 30),	\
+	[_name##_##15] = REG_FIELD(_offset, 31, 31)
+
+/*
+ * reg_field IDs to use as an index into an array
+ * If you change the order of the entries, check the devm_regmap_field_alloc()
+ * calls in init_common()
+ */
+enum regfield_ids {
+	/* ----- SROT ------ */
+	/* HW_VER */
+	VER_MAJOR,
+	VER_MINOR,
+	VER_STEP,
+	/* CTRL_OFFSET */
+	TSENS_EN,
+	TSENS_SW_RST,
+	SENSOR_EN,
+	CODE_OR_TEMP,
+
+	/* ----- TM ------ */
+	/* TRDY */
+	TRDY,
+	/* INTERRUPT ENABLE */
+	INT_EN,	/* v2+ has separate enables for crit, upper and lower irq */
+	/* STATUS */
+	LAST_TEMP_0,	/* Last temperature reading */
+	LAST_TEMP_1,
+	LAST_TEMP_2,
+	LAST_TEMP_3,
+	LAST_TEMP_4,
+	LAST_TEMP_5,
+	LAST_TEMP_6,
+	LAST_TEMP_7,
+	LAST_TEMP_8,
+	LAST_TEMP_9,
+	LAST_TEMP_10,
+	LAST_TEMP_11,
+	LAST_TEMP_12,
+	LAST_TEMP_13,
+	LAST_TEMP_14,
+	LAST_TEMP_15,
+	VALID_0,		/* VALID reading or not */
+	VALID_1,
+	VALID_2,
+	VALID_3,
+	VALID_4,
+	VALID_5,
+	VALID_6,
+	VALID_7,
+	VALID_8,
+	VALID_9,
+	VALID_10,
+	VALID_11,
+	VALID_12,
+	VALID_13,
+	VALID_14,
+	VALID_15,
+	LOWER_STATUS_0,	/* LOWER threshold violated */
+	LOWER_STATUS_1,
+	LOWER_STATUS_2,
+	LOWER_STATUS_3,
+	LOWER_STATUS_4,
+	LOWER_STATUS_5,
+	LOWER_STATUS_6,
+	LOWER_STATUS_7,
+	LOWER_STATUS_8,
+	LOWER_STATUS_9,
+	LOWER_STATUS_10,
+	LOWER_STATUS_11,
+	LOWER_STATUS_12,
+	LOWER_STATUS_13,
+	LOWER_STATUS_14,
+	LOWER_STATUS_15,
+	LOW_INT_STATUS_0,	/* LOWER interrupt status */
+	LOW_INT_STATUS_1,
+	LOW_INT_STATUS_2,
+	LOW_INT_STATUS_3,
+	LOW_INT_STATUS_4,
+	LOW_INT_STATUS_5,
+	LOW_INT_STATUS_6,
+	LOW_INT_STATUS_7,
+	LOW_INT_STATUS_8,
+	LOW_INT_STATUS_9,
+	LOW_INT_STATUS_10,
+	LOW_INT_STATUS_11,
+	LOW_INT_STATUS_12,
+	LOW_INT_STATUS_13,
+	LOW_INT_STATUS_14,
+	LOW_INT_STATUS_15,
+	LOW_INT_CLEAR_0,	/* LOWER interrupt clear */
+	LOW_INT_CLEAR_1,
+	LOW_INT_CLEAR_2,
+	LOW_INT_CLEAR_3,
+	LOW_INT_CLEAR_4,
+	LOW_INT_CLEAR_5,
+	LOW_INT_CLEAR_6,
+	LOW_INT_CLEAR_7,
+	LOW_INT_CLEAR_8,
+	LOW_INT_CLEAR_9,
+	LOW_INT_CLEAR_10,
+	LOW_INT_CLEAR_11,
+	LOW_INT_CLEAR_12,
+	LOW_INT_CLEAR_13,
+	LOW_INT_CLEAR_14,
+	LOW_INT_CLEAR_15,
+	LOW_INT_MASK_0,	/* LOWER interrupt mask */
+	LOW_INT_MASK_1,
+	LOW_INT_MASK_2,
+	LOW_INT_MASK_3,
+	LOW_INT_MASK_4,
+	LOW_INT_MASK_5,
+	LOW_INT_MASK_6,
+	LOW_INT_MASK_7,
+	LOW_INT_MASK_8,
+	LOW_INT_MASK_9,
+	LOW_INT_MASK_10,
+	LOW_INT_MASK_11,
+	LOW_INT_MASK_12,
+	LOW_INT_MASK_13,
+	LOW_INT_MASK_14,
+	LOW_INT_MASK_15,
+	LOW_THRESH_0,		/* LOWER threshold values */
+	LOW_THRESH_1,
+	LOW_THRESH_2,
+	LOW_THRESH_3,
+	LOW_THRESH_4,
+	LOW_THRESH_5,
+	LOW_THRESH_6,
+	LOW_THRESH_7,
+	LOW_THRESH_8,
+	LOW_THRESH_9,
+	LOW_THRESH_10,
+	LOW_THRESH_11,
+	LOW_THRESH_12,
+	LOW_THRESH_13,
+	LOW_THRESH_14,
+	LOW_THRESH_15,
+	UPPER_STATUS_0,	/* UPPER threshold violated */
+	UPPER_STATUS_1,
+	UPPER_STATUS_2,
+	UPPER_STATUS_3,
+	UPPER_STATUS_4,
+	UPPER_STATUS_5,
+	UPPER_STATUS_6,
+	UPPER_STATUS_7,
+	UPPER_STATUS_8,
+	UPPER_STATUS_9,
+	UPPER_STATUS_10,
+	UPPER_STATUS_11,
+	UPPER_STATUS_12,
+	UPPER_STATUS_13,
+	UPPER_STATUS_14,
+	UPPER_STATUS_15,
+	UP_INT_STATUS_0,	/* UPPER interrupt status */
+	UP_INT_STATUS_1,
+	UP_INT_STATUS_2,
+	UP_INT_STATUS_3,
+	UP_INT_STATUS_4,
+	UP_INT_STATUS_5,
+	UP_INT_STATUS_6,
+	UP_INT_STATUS_7,
+	UP_INT_STATUS_8,
+	UP_INT_STATUS_9,
+	UP_INT_STATUS_10,
+	UP_INT_STATUS_11,
+	UP_INT_STATUS_12,
+	UP_INT_STATUS_13,
+	UP_INT_STATUS_14,
+	UP_INT_STATUS_15,
+	UP_INT_CLEAR_0,	/* UPPER interrupt clear */
+	UP_INT_CLEAR_1,
+	UP_INT_CLEAR_2,
+	UP_INT_CLEAR_3,
+	UP_INT_CLEAR_4,
+	UP_INT_CLEAR_5,
+	UP_INT_CLEAR_6,
+	UP_INT_CLEAR_7,
+	UP_INT_CLEAR_8,
+	UP_INT_CLEAR_9,
+	UP_INT_CLEAR_10,
+	UP_INT_CLEAR_11,
+	UP_INT_CLEAR_12,
+	UP_INT_CLEAR_13,
+	UP_INT_CLEAR_14,
+	UP_INT_CLEAR_15,
+	UP_INT_MASK_0,		/* UPPER interrupt mask */
+	UP_INT_MASK_1,
+	UP_INT_MASK_2,
+	UP_INT_MASK_3,
+	UP_INT_MASK_4,
+	UP_INT_MASK_5,
+	UP_INT_MASK_6,
+	UP_INT_MASK_7,
+	UP_INT_MASK_8,
+	UP_INT_MASK_9,
+	UP_INT_MASK_10,
+	UP_INT_MASK_11,
+	UP_INT_MASK_12,
+	UP_INT_MASK_13,
+	UP_INT_MASK_14,
+	UP_INT_MASK_15,
+	UP_THRESH_0,		/* UPPER threshold values */
+	UP_THRESH_1,
+	UP_THRESH_2,
+	UP_THRESH_3,
+	UP_THRESH_4,
+	UP_THRESH_5,
+	UP_THRESH_6,
+	UP_THRESH_7,
+	UP_THRESH_8,
+	UP_THRESH_9,
+	UP_THRESH_10,
+	UP_THRESH_11,
+	UP_THRESH_12,
+	UP_THRESH_13,
+	UP_THRESH_14,
+	UP_THRESH_15,
+	CRITICAL_STATUS_0,	/* CRITICAL threshold violated */
+	CRITICAL_STATUS_1,
+	CRITICAL_STATUS_2,
+	CRITICAL_STATUS_3,
+	CRITICAL_STATUS_4,
+	CRITICAL_STATUS_5,
+	CRITICAL_STATUS_6,
+	CRITICAL_STATUS_7,
+	CRITICAL_STATUS_8,
+	CRITICAL_STATUS_9,
+	CRITICAL_STATUS_10,
+	CRITICAL_STATUS_11,
+	CRITICAL_STATUS_12,
+	CRITICAL_STATUS_13,
+	CRITICAL_STATUS_14,
+	CRITICAL_STATUS_15,
+	CRIT_INT_STATUS_0,	/* CRITICAL interrupt status */
+	CRIT_INT_STATUS_1,
+	CRIT_INT_STATUS_2,
+	CRIT_INT_STATUS_3,
+	CRIT_INT_STATUS_4,
+	CRIT_INT_STATUS_5,
+	CRIT_INT_STATUS_6,
+	CRIT_INT_STATUS_7,
+	CRIT_INT_STATUS_8,
+	CRIT_INT_STATUS_9,
+	CRIT_INT_STATUS_10,
+	CRIT_INT_STATUS_11,
+	CRIT_INT_STATUS_12,
+	CRIT_INT_STATUS_13,
+	CRIT_INT_STATUS_14,
+	CRIT_INT_STATUS_15,
+	CRIT_INT_CLEAR_0,	/* CRITICAL interrupt clear */
+	CRIT_INT_CLEAR_1,
+	CRIT_INT_CLEAR_2,
+	CRIT_INT_CLEAR_3,
+	CRIT_INT_CLEAR_4,
+	CRIT_INT_CLEAR_5,
+	CRIT_INT_CLEAR_6,
+	CRIT_INT_CLEAR_7,
+	CRIT_INT_CLEAR_8,
+	CRIT_INT_CLEAR_9,
+	CRIT_INT_CLEAR_10,
+	CRIT_INT_CLEAR_11,
+	CRIT_INT_CLEAR_12,
+	CRIT_INT_CLEAR_13,
+	CRIT_INT_CLEAR_14,
+	CRIT_INT_CLEAR_15,
+	CRIT_INT_MASK_0,	/* CRITICAL interrupt mask */
+	CRIT_INT_MASK_1,
+	CRIT_INT_MASK_2,
+	CRIT_INT_MASK_3,
+	CRIT_INT_MASK_4,
+	CRIT_INT_MASK_5,
+	CRIT_INT_MASK_6,
+	CRIT_INT_MASK_7,
+	CRIT_INT_MASK_8,
+	CRIT_INT_MASK_9,
+	CRIT_INT_MASK_10,
+	CRIT_INT_MASK_11,
+	CRIT_INT_MASK_12,
+	CRIT_INT_MASK_13,
+	CRIT_INT_MASK_14,
+	CRIT_INT_MASK_15,
+	CRIT_THRESH_0,		/* CRITICAL threshold values */
+	CRIT_THRESH_1,
+	CRIT_THRESH_2,
+	CRIT_THRESH_3,
+	CRIT_THRESH_4,
+	CRIT_THRESH_5,
+	CRIT_THRESH_6,
+	CRIT_THRESH_7,
+	CRIT_THRESH_8,
+	CRIT_THRESH_9,
+	CRIT_THRESH_10,
+	CRIT_THRESH_11,
+	CRIT_THRESH_12,
+	CRIT_THRESH_13,
+	CRIT_THRESH_14,
+	CRIT_THRESH_15,
+
+	/* WATCHDOG */
+	WDOG_BARK_STATUS,
+	WDOG_BARK_CLEAR,
+	WDOG_BARK_MASK,
+	WDOG_BARK_COUNT,
+
+	/* CYCLE COMPLETION MONITOR */
+	CC_MON_STATUS,
+	CC_MON_CLEAR,
+	CC_MON_MASK,
+
+	MIN_STATUS_0,		/* MIN threshold violated */
+	MIN_STATUS_1,
+	MIN_STATUS_2,
+	MIN_STATUS_3,
+	MIN_STATUS_4,
+	MIN_STATUS_5,
+	MIN_STATUS_6,
+	MIN_STATUS_7,
+	MIN_STATUS_8,
+	MIN_STATUS_9,
+	MIN_STATUS_10,
+	MIN_STATUS_11,
+	MIN_STATUS_12,
+	MIN_STATUS_13,
+	MIN_STATUS_14,
+	MIN_STATUS_15,
+	MAX_STATUS_0,		/* MAX threshold violated */
+	MAX_STATUS_1,
+	MAX_STATUS_2,
+	MAX_STATUS_3,
+	MAX_STATUS_4,
+	MAX_STATUS_5,
+	MAX_STATUS_6,
+	MAX_STATUS_7,
+	MAX_STATUS_8,
+	MAX_STATUS_9,
+	MAX_STATUS_10,
+	MAX_STATUS_11,
+	MAX_STATUS_12,
+	MAX_STATUS_13,
+	MAX_STATUS_14,
+	MAX_STATUS_15,
+
+	/* Keep last */
+	MAX_REGFIELDS
+};
+
+/**
+ * struct tsens_features - Features supported by the IP
+ * @ver_major: Major number of IP version
+ * @crit_int: does the IP support critical interrupts?
+ * @adc:      do the sensors only output adc code (instead of temperature)?
+ * @srot_split: does the IP neatly splits the register space into SROT and TM,
+ *              with SROT only being available to secure boot firmware?
+ * @has_watchdog: does this IP support watchdog functionality?
+ * @max_sensors: maximum sensors supported by this version of the IP
+ */
+struct tsens_features {
+	unsigned int ver_major;
+	unsigned int crit_int:1;
+	unsigned int adc:1;
+	unsigned int srot_split:1;
+	unsigned int has_watchdog:1;
+	unsigned int max_sensors;
+};
+
+/**
+ * struct tsens_plat_data - tsens compile-time platform data
+ * @num_sensors: Number of sensors supported by platform
+ * @ops: operations the tsens instance supports
+ * @hw_ids: Subset of sensors ids supported by platform, if not the first n
+ * @feat: features of the IP
+ * @fields: bitfield locations
+ */
+struct tsens_plat_data {
+	const u32		num_sensors;
+	const struct tsens_ops	*ops;
+	unsigned int		*hw_ids;
+	struct tsens_features	*feat;
+	const struct reg_field		*fields;
+};
+
+/**
+ * struct tsens_context - Registers to be saved/restored across a context loss
+ * @threshold: Threshold register value
+ * @control: Control register value
+ */
+struct tsens_context {
+	int	threshold;
+	int	control;
+};
+
+/**
+ * struct tsens_priv - private data for each instance of the tsens IP
+ * @dev: pointer to struct device
+ * @num_sensors: number of sensors enabled on this device
+ * @tm_map: pointer to TM register address space
+ * @srot_map: pointer to SROT register address space
+ * @tm_offset: deal with old device trees that don't address TM and SROT
+ *             address space separately
+ * @ul_lock: lock while processing upper/lower threshold interrupts
+ * @crit_lock: lock while processing critical threshold interrupts
+ * @rf: array of regmap_fields used to store value of the field
+ * @ctx: registers to be saved and restored during suspend/resume
+ * @feat: features of the IP
+ * @fields: bitfield locations
+ * @ops: pointer to list of callbacks supported by this device
+ * @debug_root: pointer to debugfs dentry for all tsens
+ * @debug: pointer to debugfs dentry for tsens controller
+ * @sensor: list of sensors attached to this device
+ */
+struct tsens_priv {
+	struct device			*dev;
+	u32				num_sensors;
+	struct regmap			*tm_map;
+	struct regmap			*srot_map;
+	u32				tm_offset;
+
+	/* lock for upper/lower threshold interrupts */
+	spinlock_t			ul_lock;
+
+	struct regmap_field		*rf[MAX_REGFIELDS];
+	struct tsens_context		ctx;
+	struct tsens_features		*feat;
+	const struct reg_field		*fields;
+	const struct tsens_ops		*ops;
+
+	struct dentry			*debug_root;
+	struct dentry			*debug;
+
+	struct tsens_sensor		sensor[];
+};
+
+char *qfprom_read(struct device *dev, const char *cname);
+void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
+int init_common(struct tsens_priv *priv);
+int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp);
+int get_temp_common(const struct tsens_sensor *s, int *temp);
+
+/* TSENS target */
+extern struct tsens_plat_data data_8960;
+
+/* TSENS v0.1 targets */
+extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
+
+/* TSENS v1 targets */
+extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
+
+/* TSENS v2 targets */
+extern struct tsens_plat_data data_8996, data_tsens_v2;
+
+#endif /* __QCOM_TSENS_H__ */
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
new file mode 100644
index 000000000..d111e218f
--- /dev/null
+++ b/drivers/thermal/qoriq_thermal.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sizes.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "thermal_core.h"
+#include "thermal_hwmon.h"
+
+#define SITES_MAX		16
+#define TMR_DISABLE		0x0
+#define TMR_ME			0x80000000
+#define TMR_ALPF		0x0c000000
+#define TMR_ALPF_V2		0x03000000
+#define TMTMIR_DEFAULT	0x0000000f
+#define TIER_DISABLE	0x0
+#define TEUMR0_V2		0x51009c00
+#define TMSARA_V2		0xe
+#define TMU_VER1		0x1
+#define TMU_VER2		0x2
+
+#define REGS_TMR	0x000	/* Mode Register */
+#define TMR_DISABLE	0x0
+#define TMR_ME		0x80000000
+#define TMR_ALPF	0x0c000000
+#define TMR_MSITE_ALL	GENMASK(15, 0)
+
+#define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
+#define TMTMIR_DEFAULT	0x0000000f
+
+#define REGS_V2_TMSR	0x008	/* monitor site register */
+
+#define REGS_V2_TMTMIR	0x00c	/* Temperature measurement interval Register */
+
+#define REGS_TIER	0x020	/* Interrupt Enable Register */
+#define TIER_DISABLE	0x0
+
+
+#define REGS_TTCFGR	0x080	/* Temperature Configuration Register */
+#define REGS_TSCFGR	0x084	/* Sensor Configuration Register */
+
+#define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
+					    * Site Register
+					    */
+#define TRITSR_V	BIT(31)
+#define REGS_V2_TMSAR(n)	(0x304 + 16 * (n))	/* TMU monitoring
+						* site adjustment register
+						*/
+#define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
+					   * Control Register
+					   */
+#define REGS_IPBRR(n)		(0xbf8 + 4 * (n)) /* IP Block Revision
+						   * Register n
+						   */
+#define REGS_V2_TEUMR(n)	(0xf00 + 4 * (n))
+
+/*
+ * Thermal zone data
+ */
+struct qoriq_sensor {
+	int				id;
+};
+
+struct qoriq_tmu_data {
+	int ver;
+	struct regmap *regmap;
+	struct clk *clk;
+	struct qoriq_sensor	sensor[SITES_MAX];
+};
+
+static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
+{
+	return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
+}
+
+static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct qoriq_sensor *qsensor = tz->devdata;
+	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
+	u32 val;
+	/*
+	 * REGS_TRITSR(id) has the following layout:
+	 *
+	 * For TMU Rev1:
+	 * 31  ... 7 6 5 4 3 2 1 0
+	 *  V          TEMP
+	 *
+	 * Where V bit signifies if the measurement is ready and is
+	 * within sensor range. TEMP is an 8 bit value representing
+	 * temperature in Celsius.
+
+	 * For TMU Rev2:
+	 * 31  ... 8 7 6 5 4 3 2 1 0
+	 *  V          TEMP
+	 *
+	 * Where V bit signifies if the measurement is ready and is
+	 * within sensor range. TEMP is an 9 bit value representing
+	 * temperature in KelVin.
+	 */
+	if (regmap_read_poll_timeout(qdata->regmap,
+				     REGS_TRITSR(qsensor->id),
+				     val,
+				     val & TRITSR_V,
+				     USEC_PER_MSEC,
+				     10 * USEC_PER_MSEC))
+		return -ENODATA;
+
+	if (qdata->ver == TMU_VER1)
+		*temp = (val & GENMASK(7, 0)) * MILLIDEGREE_PER_DEGREE;
+	else
+		*temp = kelvin_to_millicelsius(val & GENMASK(8, 0));
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops tmu_tz_ops = {
+	.get_temp = tmu_get_temp,
+};
+
+static int qoriq_tmu_register_tmu_zone(struct device *dev,
+				       struct qoriq_tmu_data *qdata)
+{
+	int id;
+
+	if (qdata->ver == TMU_VER1) {
+		regmap_write(qdata->regmap, REGS_TMR,
+			     TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
+	} else {
+		regmap_write(qdata->regmap, REGS_V2_TMSR, TMR_MSITE_ALL);
+		regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF_V2);
+	}
+
+	for (id = 0; id < SITES_MAX; id++) {
+		struct thermal_zone_device *tzd;
+		struct qoriq_sensor *sensor = &qdata->sensor[id];
+		int ret;
+
+		sensor->id = id;
+
+		tzd = devm_thermal_of_zone_register(dev, id,
+						    sensor,
+						    &tmu_tz_ops);
+		ret = PTR_ERR_OR_ZERO(tzd);
+		if (ret) {
+			if (ret == -ENODEV)
+				continue;
+
+			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
+			return ret;
+		}
+
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(dev,
+				 "Failed to add hwmon sysfs attributes\n");
+
+	}
+
+	return 0;
+}
+
+static int qoriq_tmu_calibration(struct device *dev,
+				 struct qoriq_tmu_data *data)
+{
+	int i, val, len;
+	u32 range[4];
+	const u32 *calibration;
+	struct device_node *np = dev->of_node;
+
+	len = of_property_count_u32_elems(np, "fsl,tmu-range");
+	if (len < 0 || len > 4) {
+		dev_err(dev, "invalid range data.\n");
+		return len;
+	}
+
+	val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+	if (val != 0) {
+		dev_err(dev, "failed to read range data.\n");
+		return val;
+	}
+
+	/* Init temperature range registers */
+	for (i = 0; i < len; i++)
+		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
+
+	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
+	if (calibration == NULL || len % 8) {
+		dev_err(dev, "invalid calibration data.\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < len; i += 8, calibration += 2) {
+		val = of_read_number(calibration, 1);
+		regmap_write(data->regmap, REGS_TTCFGR, val);
+		val = of_read_number(calibration + 1, 1);
+		regmap_write(data->regmap, REGS_TSCFGR, val);
+	}
+
+	return 0;
+}
+
+static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
+{
+	int i;
+
+	/* Disable interrupt, using polling instead */
+	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
+
+	/* Set update_interval */
+
+	if (data->ver == TMU_VER1) {
+		regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
+	} else {
+		regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
+		regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
+		for (i = 0; i < SITES_MAX; i++)
+			regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2);
+	}
+
+	/* Disable monitoring */
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
+}
+
+static const struct regmap_range qoriq_yes_ranges[] = {
+	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
+	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
+	regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
+	regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)),
+	regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
+	/* Read only registers below */
+	regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
+};
+
+static const struct regmap_access_table qoriq_wr_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges) - 1,
+};
+
+static const struct regmap_access_table qoriq_rd_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges),
+};
+
+static void qoriq_tmu_action(void *p)
+{
+	struct qoriq_tmu_data *data = p;
+
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
+	clk_disable_unprepare(data->clk);
+}
+
+static int qoriq_tmu_probe(struct platform_device *pdev)
+{
+	int ret;
+	u32 ver;
+	struct qoriq_tmu_data *data;
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	const bool little_endian = of_property_read_bool(np, "little-endian");
+	const enum regmap_endian format_endian =
+		little_endian ? REGMAP_ENDIAN_LITTLE : REGMAP_ENDIAN_BIG;
+	const struct regmap_config regmap_config = {
+		.reg_bits		= 32,
+		.val_bits		= 32,
+		.reg_stride		= 4,
+		.rd_table		= &qoriq_rd_table,
+		.wr_table		= &qoriq_wr_table,
+		.val_format_endian	= format_endian,
+		.max_register		= SZ_4K,
+	};
+	void __iomem *base;
+
+	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	ret = PTR_ERR_OR_ZERO(base);
+	if (ret) {
+		dev_err(dev, "Failed to get memory region\n");
+		return ret;
+	}
+
+	data->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	ret = PTR_ERR_OR_ZERO(data->regmap);
+	if (ret) {
+		dev_err(dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
+	data->clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, qoriq_tmu_action, data);
+	if (ret)
+		return ret;
+
+	/* version register offset at: 0xbf8 on both v1 and v2 */
+	ret = regmap_read(data->regmap, REGS_IPBRR(0), &ver);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read IP block version\n");
+		return ret;
+	}
+	data->ver = (ver >> 8) & 0xff;
+
+	qoriq_tmu_init_device(data);	/* TMU initialization */
+
+	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
+	if (ret < 0)
+		return ret;
+
+	ret = qoriq_tmu_register_tmu_zone(dev, data);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register sensors\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
+{
+	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, 0);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int __maybe_unused qoriq_tmu_resume(struct device *dev)
+{
+	int ret;
+	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	/* Enable monitoring */
+	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME);
+}
+
+static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
+			 qoriq_tmu_suspend, qoriq_tmu_resume);
+
+static const struct of_device_id qoriq_tmu_match[] = {
+	{ .compatible = "fsl,qoriq-tmu", },
+	{ .compatible = "fsl,imx8mq-tmu", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, qoriq_tmu_match);
+
+static struct platform_driver qoriq_tmu = {
+	.driver	= {
+		.name		= "qoriq_thermal",
+		.pm		= &qoriq_tmu_pm_ops,
+		.of_match_table	= qoriq_tmu_match,
+	},
+	.probe	= qoriq_tmu_probe,
+};
+module_platform_driver(qoriq_tmu);
+
+MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>");
+MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
new file mode 100644
index 000000000..4c1c6f89a
--- /dev/null
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  R-Car Gen3 THS thermal sensor driver
+ *  Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen.
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation.
+ * Copyright (C) 2016 Sang Engineering
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sys_soc.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+#include "thermal_hwmon.h"
+
+/* Register offsets */
+#define REG_GEN3_IRQSTR		0x04
+#define REG_GEN3_IRQMSK		0x08
+#define REG_GEN3_IRQCTL		0x0C
+#define REG_GEN3_IRQEN		0x10
+#define REG_GEN3_IRQTEMP1	0x14
+#define REG_GEN3_IRQTEMP2	0x18
+#define REG_GEN3_IRQTEMP3	0x1C
+#define REG_GEN3_CTSR		0x20
+#define REG_GEN3_THCTR		0x20
+#define REG_GEN3_TEMP		0x28
+#define REG_GEN3_THCODE1	0x50
+#define REG_GEN3_THCODE2	0x54
+#define REG_GEN3_THCODE3	0x58
+#define REG_GEN3_PTAT1		0x5c
+#define REG_GEN3_PTAT2		0x60
+#define REG_GEN3_PTAT3		0x64
+#define REG_GEN3_THSCP		0x68
+
+/* IRQ{STR,MSK,EN} bits */
+#define IRQ_TEMP1		BIT(0)
+#define IRQ_TEMP2		BIT(1)
+#define IRQ_TEMP3		BIT(2)
+#define IRQ_TEMPD1		BIT(3)
+#define IRQ_TEMPD2		BIT(4)
+#define IRQ_TEMPD3		BIT(5)
+
+/* CTSR bits */
+#define CTSR_PONM	BIT(8)
+#define CTSR_AOUT	BIT(7)
+#define CTSR_THBGR	BIT(5)
+#define CTSR_VMEN	BIT(4)
+#define CTSR_VMST	BIT(1)
+#define CTSR_THSST	BIT(0)
+
+/* THCTR bits */
+#define THCTR_PONM	BIT(6)
+#define THCTR_THSST	BIT(0)
+
+/* THSCP bits */
+#define THSCP_COR_PARA_VLD	(BIT(15) | BIT(14))
+
+#define CTEMP_MASK	0xFFF
+
+#define MCELSIUS(temp)	((temp) * 1000)
+#define GEN3_FUSE_MASK	0xFFF
+
+#define TSC_MAX_NUM	5
+
+/* Structure for thermal temperature calculation */
+struct equation_coefs {
+	int a1;
+	int b1;
+	int a2;
+	int b2;
+};
+
+struct rcar_gen3_thermal_tsc {
+	void __iomem *base;
+	struct thermal_zone_device *zone;
+	struct equation_coefs coef;
+	int tj_t;
+	int thcode[3];
+};
+
+struct rcar_gen3_thermal_priv {
+	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
+	unsigned int num_tscs;
+	void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
+	int ptat[3];
+};
+
+static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc,
+					 u32 reg)
+{
+	return ioread32(tsc->base + reg);
+}
+
+static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
+					   u32 reg, u32 data)
+{
+	iowrite32(data, tsc->base + reg);
+}
+
+/*
+ * Linear approximation for temperature
+ *
+ * [reg] = [temp] * a + b => [temp] = ([reg] - b) / a
+ *
+ * The constants a and b are calculated using two triplets of int values PTAT
+ * and THCODE. PTAT and THCODE can either be read from hardware or use hard
+ * coded values from driver. The formula to calculate a and b are taken from
+ * BSP and sparsely documented and understood.
+ *
+ * Examining the linear formula and the formula used to calculate constants a
+ * and b while knowing that the span for PTAT and THCODE values are between
+ * 0x000 and 0xfff the largest integer possible is 0xfff * 0xfff == 0xffe001.
+ * Integer also needs to be signed so that leaves 7 bits for binary
+ * fixed point scaling.
+ */
+
+#define FIXPT_SHIFT 7
+#define FIXPT_INT(_x) ((_x) << FIXPT_SHIFT)
+#define INT_FIXPT(_x) ((_x) >> FIXPT_SHIFT)
+#define FIXPT_DIV(_a, _b) DIV_ROUND_CLOSEST(((_a) << FIXPT_SHIFT), (_b))
+#define FIXPT_TO_MCELSIUS(_x) ((_x) * 1000 >> FIXPT_SHIFT)
+
+#define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
+
+/* no idea where these constants come from */
+#define TJ_3 -41
+
+static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv,
+					 struct rcar_gen3_thermal_tsc *tsc,
+					 int ths_tj_1)
+{
+	/* TODO: Find documentation and document constant calculation formula */
+
+	/*
+	 * Division is not scaled in BSP and if scaled it might overflow
+	 * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
+	 */
+	tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3))
+		     / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3);
+
+	tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[2]),
+				 tsc->tj_t - FIXPT_INT(TJ_3));
+	tsc->coef.b1 = FIXPT_INT(tsc->thcode[2]) - tsc->coef.a1 * TJ_3;
+
+	tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[0]),
+				 tsc->tj_t - FIXPT_INT(ths_tj_1));
+	tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * ths_tj_1;
+}
+
+static int rcar_gen3_thermal_round(int temp)
+{
+	int result, round_offs;
+
+	round_offs = temp >= 0 ? RCAR3_THERMAL_GRAN / 2 :
+		-RCAR3_THERMAL_GRAN / 2;
+	result = (temp + round_offs) / RCAR3_THERMAL_GRAN;
+	return result * RCAR3_THERMAL_GRAN;
+}
+
+static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct rcar_gen3_thermal_tsc *tsc = tz->devdata;
+	int mcelsius, val;
+	int reg;
+
+	/* Read register and convert to mili Celsius */
+	reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
+
+	if (reg <= tsc->thcode[1])
+		val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1,
+				tsc->coef.a1);
+	else
+		val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2,
+				tsc->coef.a2);
+	mcelsius = FIXPT_TO_MCELSIUS(val);
+
+	/* Guaranteed operating range is -40C to 125C. */
+
+	/* Round value to device granularity setting */
+	*temp = rcar_gen3_thermal_round(mcelsius);
+
+	return 0;
+}
+
+static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
+					      int mcelsius)
+{
+	int celsius, val;
+
+	celsius = DIV_ROUND_CLOSEST(mcelsius, 1000);
+	if (celsius <= INT_FIXPT(tsc->tj_t))
+		val = celsius * tsc->coef.a1 + tsc->coef.b1;
+	else
+		val = celsius * tsc->coef.a2 + tsc->coef.b2;
+
+	return INT_FIXPT(val);
+}
+
+static int rcar_gen3_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct rcar_gen3_thermal_tsc *tsc = tz->devdata;
+	u32 irqmsk = 0;
+
+	if (low != -INT_MAX) {
+		irqmsk |= IRQ_TEMPD1;
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
+					rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
+	}
+
+	if (high != INT_MAX) {
+		irqmsk |= IRQ_TEMP2;
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2,
+					rcar_gen3_thermal_mcelsius_to_temp(tsc, high));
+	}
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, irqmsk);
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops rcar_gen3_tz_of_ops = {
+	.get_temp	= rcar_gen3_thermal_get_temp,
+	.set_trips	= rcar_gen3_thermal_set_trips,
+};
+
+static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
+{
+	struct rcar_gen3_thermal_priv *priv = data;
+	unsigned int i;
+	u32 status;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
+		rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
+		if (status)
+			thermal_zone_device_update(priv->tscs[i]->zone,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct soc_device_attribute r8a7795es1[] = {
+	{ .soc_id = "r8a7795", .revision = "ES1.*" },
+	{ /* sentinel */ }
+};
+
+static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
+{
+	unsigned int i;
+	u32 thscp;
+
+	/* If fuses are not set, fallback to pseudo values. */
+	thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP);
+	if ((thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
+		/* Default THCODE values in case FUSEs are not set. */
+		static const int thcodes[TSC_MAX_NUM][3] = {
+			{ 3397, 2800, 2221 },
+			{ 3393, 2795, 2216 },
+			{ 3389, 2805, 2237 },
+			{ 3415, 2694, 2195 },
+			{ 3356, 2724, 2244 },
+		};
+
+		priv->ptat[0] = 2631;
+		priv->ptat[1] = 1509;
+		priv->ptat[2] = 435;
+
+		for (i = 0; i < priv->num_tscs; i++) {
+			struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+			tsc->thcode[0] = thcodes[i][0];
+			tsc->thcode[1] = thcodes[i][1];
+			tsc->thcode[2] = thcodes[i][2];
+		}
+
+		return false;
+	}
+
+	/*
+	 * Set the pseudo calibration points with fused values.
+	 * PTAT is shared between all TSCs but only fused for the first
+	 * TSC while THCODEs are fused for each TSC.
+	 */
+	priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) &
+		GEN3_FUSE_MASK;
+	priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) &
+		GEN3_FUSE_MASK;
+	priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) &
+		GEN3_FUSE_MASK;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) &
+			GEN3_FUSE_MASK;
+		tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) &
+			GEN3_FUSE_MASK;
+		tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) &
+			GEN3_FUSE_MASK;
+	}
+
+	return true;
+}
+
+static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
+{
+	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  CTSR_THBGR);
+	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  0x0);
+
+	usleep_range(1000, 2000);
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_PONM);
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+	if (tsc->zone->ops->set_trips)
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
+					IRQ_TEMPD1 | IRQ_TEMP2);
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
+				CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN);
+
+	usleep_range(100, 200);
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
+				CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN |
+				CTSR_VMST | CTSR_THSST);
+
+	usleep_range(1000, 2000);
+}
+
+static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
+{
+	u32 reg_val;
+
+	reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
+	reg_val &= ~THCTR_PONM;
+	rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
+
+	usleep_range(1000, 2000);
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0);
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+	if (tsc->zone->ops->set_trips)
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
+					IRQ_TEMPD1 | IRQ_TEMP2);
+
+	reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
+	reg_val |= THCTR_THSST;
+	rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
+
+	usleep_range(1000, 2000);
+}
+
+static const int rcar_gen3_ths_tj_1 = 126;
+static const int rcar_gen3_ths_tj_1_m3_w = 116;
+static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
+	{
+		.compatible = "renesas,r8a774a1-thermal",
+		.data = &rcar_gen3_ths_tj_1_m3_w,
+	},
+	{
+		.compatible = "renesas,r8a774b1-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a774e1-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a7795-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a7796-thermal",
+		.data = &rcar_gen3_ths_tj_1_m3_w,
+	},
+	{
+		.compatible = "renesas,r8a77961-thermal",
+		.data = &rcar_gen3_ths_tj_1_m3_w,
+	},
+	{
+		.compatible = "renesas,r8a77965-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a77980-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a779a0-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a779f0-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
+
+static int rcar_gen3_thermal_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static void rcar_gen3_hwmon_action(void *data)
+{
+	struct thermal_zone_device *zone = data;
+
+	thermal_remove_hwmon_sysfs(zone);
+}
+
+static int rcar_gen3_thermal_request_irqs(struct rcar_gen3_thermal_priv *priv,
+					  struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int i;
+	char *irqname;
+	int ret, irq;
+
+	for (i = 0; i < 2; i++) {
+		irq = platform_get_irq_optional(pdev, i);
+		if (irq < 0)
+			return irq;
+
+		irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d",
+					 dev_name(dev), i);
+		if (!irqname)
+			return -ENOMEM;
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+						rcar_gen3_thermal_irq,
+						IRQF_ONESHOT, irqname, priv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rcar_gen3_thermal_probe(struct platform_device *pdev)
+{
+	struct rcar_gen3_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	const int *ths_tj_1 = of_device_get_match_data(dev);
+	struct resource *res;
+	struct thermal_zone_device *zone;
+	unsigned int i;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->thermal_init = rcar_gen3_thermal_init;
+	if (soc_device_match(r8a7795es1))
+		priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1;
+
+	platform_set_drvdata(pdev, priv);
+
+	if (rcar_gen3_thermal_request_irqs(priv, pdev))
+		rcar_gen3_tz_of_ops.set_trips = NULL;
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	for (i = 0; i < TSC_MAX_NUM; i++) {
+		struct rcar_gen3_thermal_tsc *tsc;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+
+		tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL);
+		if (!tsc) {
+			ret = -ENOMEM;
+			goto error_unregister;
+		}
+
+		tsc->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(tsc->base)) {
+			ret = PTR_ERR(tsc->base);
+			goto error_unregister;
+		}
+
+		priv->tscs[i] = tsc;
+	}
+
+	priv->num_tscs = i;
+
+	if (!rcar_gen3_thermal_read_fuses(priv))
+		dev_info(dev, "No calibration values fused, fallback to driver values\n");
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		zone = devm_thermal_of_zone_register(dev, i, tsc,
+						     &rcar_gen3_tz_of_ops);
+		if (IS_ERR(zone)) {
+			dev_err(dev, "Sensor %u: Can't register thermal zone\n", i);
+			ret = PTR_ERR(zone);
+			goto error_unregister;
+		}
+		tsc->zone = zone;
+
+		priv->thermal_init(tsc);
+		rcar_gen3_thermal_calc_coefs(priv, tsc, *ths_tj_1);
+
+		tsc->zone->tzp->no_hwmon = false;
+		ret = thermal_add_hwmon_sysfs(tsc->zone);
+		if (ret)
+			goto error_unregister;
+
+		ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone);
+		if (ret)
+			goto error_unregister;
+
+		ret = of_thermal_get_ntrips(tsc->zone);
+		if (ret < 0)
+			goto error_unregister;
+
+		dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret);
+	}
+
+	if (!priv->num_tscs) {
+		ret = -ENODEV;
+		goto error_unregister;
+	}
+
+	return 0;
+
+error_unregister:
+	rcar_gen3_thermal_remove(pdev);
+
+	return ret;
+}
+
+static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
+{
+	struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+		struct thermal_zone_device *zone = tsc->zone;
+
+		priv->thermal_init(tsc);
+		if (zone->ops->set_trips)
+			rcar_gen3_thermal_set_trips(zone, zone->prev_low_trip,
+						    zone->prev_high_trip);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, NULL,
+			 rcar_gen3_thermal_resume);
+
+static struct platform_driver rcar_gen3_thermal_driver = {
+	.driver	= {
+		.name	= "rcar_gen3_thermal",
+		.pm = &rcar_gen3_thermal_pm_ops,
+		.of_match_table = rcar_gen3_thermal_dt_ids,
+	},
+	.probe		= rcar_gen3_thermal_probe,
+	.remove		= rcar_gen3_thermal_remove,
+};
+module_platform_driver(rcar_gen3_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver");
+MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>");
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
new file mode 100644
index 000000000..61c2b8855
--- /dev/null
+++ b/drivers/thermal/rcar_thermal.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  R-Car THS/TSC thermal sensor driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/thermal.h>
+
+#include "thermal_hwmon.h"
+
+#define IDLE_INTERVAL	5000
+
+#define COMMON_STR	0x00
+#define COMMON_ENR	0x04
+#define COMMON_INTMSK	0x0c
+
+#define REG_POSNEG	0x20
+#define REG_FILONOFF	0x28
+#define REG_THSCR	0x2c
+#define REG_THSSR	0x30
+#define REG_INTCTRL	0x34
+
+/* THSCR */
+#define CPCTL	(1 << 12)
+
+/* THSSR */
+#define CTEMP	0x3f
+
+struct rcar_thermal_common {
+	void __iomem *base;
+	struct device *dev;
+	struct list_head head;
+	spinlock_t lock;
+};
+
+struct rcar_thermal_chip {
+	unsigned int use_of_thermal : 1;
+	unsigned int has_filonoff : 1;
+	unsigned int irq_per_ch : 1;
+	unsigned int needs_suspend_resume : 1;
+	unsigned int nirqs;
+	unsigned int ctemp_bands;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+	.use_of_thermal = 0,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+	.ctemp_bands = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+	.ctemp_bands = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 0,
+	.irq_per_ch = 1,
+	.needs_suspend_resume = 1,
+	/*
+	 * The Gen3 chip has 3 interrupts, but this driver uses only 2
+	 * interrupts to detect a temperature change, rise or fall.
+	 */
+	.nirqs = 2,
+	.ctemp_bands = 2,
+};
+
+struct rcar_thermal_priv {
+	void __iomem *base;
+	struct rcar_thermal_common *common;
+	struct thermal_zone_device *zone;
+	const struct rcar_thermal_chip *chip;
+	struct delayed_work work;
+	struct mutex lock;
+	struct list_head list;
+	int id;
+};
+
+#define rcar_thermal_for_each_priv(pos, common)	\
+	list_for_each_entry(pos, &common->head, list)
+
+#define MCELSIUS(temp)			((temp) * 1000)
+#define rcar_zone_to_priv(zone)		((zone)->devdata)
+#define rcar_priv_to_dev(priv)		((priv)->common->dev)
+#define rcar_has_irq_support(priv)	((priv)->common->base)
+#define rcar_id_to_shift(priv)		((priv)->id * 8)
+
+static const struct of_device_id rcar_thermal_dt_ids[] = {
+	{
+		.compatible = "renesas,rcar-thermal",
+		.data = &rcar_thermal,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-thermal",
+		 .data = &rcar_gen2_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a774c0",
+		.data = &rcar_gen3_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77970",
+		.data = &rcar_gen3_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77990",
+		.data = &rcar_gen3_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77995",
+		.data = &rcar_gen3_thermal,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
+
+/*
+ *		basic functions
+ */
+#define rcar_thermal_common_read(c, r) \
+	_rcar_thermal_common_read(c, COMMON_ ##r)
+static u32 _rcar_thermal_common_read(struct rcar_thermal_common *common,
+				     u32 reg)
+{
+	return ioread32(common->base + reg);
+}
+
+#define rcar_thermal_common_write(c, r, d) \
+	_rcar_thermal_common_write(c, COMMON_ ##r, d)
+static void _rcar_thermal_common_write(struct rcar_thermal_common *common,
+				       u32 reg, u32 data)
+{
+	iowrite32(data, common->base + reg);
+}
+
+#define rcar_thermal_common_bset(c, r, m, d) \
+	_rcar_thermal_common_bset(c, COMMON_ ##r, m, d)
+static void _rcar_thermal_common_bset(struct rcar_thermal_common *common,
+				      u32 reg, u32 mask, u32 data)
+{
+	u32 val;
+
+	val = ioread32(common->base + reg);
+	val &= ~mask;
+	val |= (data & mask);
+	iowrite32(val, common->base + reg);
+}
+
+#define rcar_thermal_read(p, r) _rcar_thermal_read(p, REG_ ##r)
+static u32 _rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
+#define rcar_thermal_write(p, r, d) _rcar_thermal_write(p, REG_ ##r, d)
+static void _rcar_thermal_write(struct rcar_thermal_priv *priv,
+				u32 reg, u32 data)
+{
+	iowrite32(data, priv->base + reg);
+}
+
+#define rcar_thermal_bset(p, r, m, d) _rcar_thermal_bset(p, REG_ ##r, m, d)
+static void _rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg,
+			       u32 mask, u32 data)
+{
+	u32 val;
+
+	val = ioread32(priv->base + reg);
+	val &= ~mask;
+	val |= (data & mask);
+	iowrite32(val, priv->base + reg);
+}
+
+/*
+ *		zone device functions
+ */
+static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
+{
+	struct device *dev = rcar_priv_to_dev(priv);
+	int old, new, ctemp = -EINVAL;
+	unsigned int i;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * TSC decides a value of CPTAP automatically,
+	 * and this is the conditions which validate interrupt.
+	 */
+	rcar_thermal_bset(priv, THSCR, CPCTL, CPCTL);
+
+	old = ~0;
+	for (i = 0; i < 128; i++) {
+		/*
+		 * we need to wait 300us after changing comparator offset
+		 * to get stable temperature.
+		 * see "Usage Notes" on datasheet
+		 */
+		usleep_range(300, 400);
+
+		new = rcar_thermal_read(priv, THSSR) & CTEMP;
+		if (new == old) {
+			ctemp = new;
+			break;
+		}
+		old = new;
+	}
+
+	if (ctemp < 0) {
+		dev_err(dev, "thermal sensor was broken\n");
+		goto err_out_unlock;
+	}
+
+	/*
+	 * enable IRQ
+	 */
+	if (rcar_has_irq_support(priv)) {
+		if (priv->chip->has_filonoff)
+			rcar_thermal_write(priv, FILONOFF, 0);
+
+		/* enable Rising/Falling edge interrupt */
+		rcar_thermal_write(priv, POSNEG,  0x1);
+		rcar_thermal_write(priv, INTCTRL, (((ctemp - 0) << 8) |
+						   ((ctemp - 1) << 0)));
+	}
+
+err_out_unlock:
+	mutex_unlock(&priv->lock);
+
+	return ctemp;
+}
+
+static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
+					 int *temp)
+{
+	int ctemp;
+
+	ctemp = rcar_thermal_update_temp(priv);
+	if (ctemp < 0)
+		return ctemp;
+
+	/* Guaranteed operating range is -45C to 125C. */
+
+	if (priv->chip->ctemp_bands == 1)
+		*temp = MCELSIUS((ctemp * 5) - 65);
+	else if (ctemp < 24)
+		*temp = MCELSIUS(((ctemp * 55) - 720) / 10);
+	else
+		*temp = MCELSIUS((ctemp * 5) - 60);
+
+	return 0;
+}
+
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
+static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
+				      int trip, enum thermal_trip_type *type)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+	struct device *dev = rcar_priv_to_dev(priv);
+
+	/* see rcar_thermal_get_temp() */
+	switch (trip) {
+	case 0: /* +90 <= temp */
+		*type = THERMAL_TRIP_CRITICAL;
+		break;
+	default:
+		dev_err(dev, "rcar driver trip error\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rcar_thermal_get_trip_temp(struct thermal_zone_device *zone,
+				      int trip, int *temp)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+	struct device *dev = rcar_priv_to_dev(priv);
+
+	/* see rcar_thermal_get_temp() */
+	switch (trip) {
+	case 0: /* +90 <= temp */
+		*temp = MCELSIUS(90);
+		break;
+	default:
+		dev_err(dev, "rcar driver trip error\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops rcar_thermal_zone_of_ops = {
+	.get_temp	= rcar_thermal_get_temp,
+};
+
+static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
+	.get_temp	= rcar_thermal_get_temp,
+	.get_trip_type	= rcar_thermal_get_trip_type,
+	.get_trip_temp	= rcar_thermal_get_trip_temp,
+};
+
+/*
+ *		interrupt
+ */
+#define rcar_thermal_irq_enable(p)	_rcar_thermal_irq_ctrl(p, 1)
+#define rcar_thermal_irq_disable(p)	_rcar_thermal_irq_ctrl(p, 0)
+static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
+{
+	struct rcar_thermal_common *common = priv->common;
+	unsigned long flags;
+	u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
+
+	if (!rcar_has_irq_support(priv))
+		return;
+
+	spin_lock_irqsave(&common->lock, flags);
+
+	rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
+
+	spin_unlock_irqrestore(&common->lock, flags);
+}
+
+static void rcar_thermal_work(struct work_struct *work)
+{
+	struct rcar_thermal_priv *priv;
+	int ret;
+
+	priv = container_of(work, struct rcar_thermal_priv, work.work);
+
+	ret = rcar_thermal_update_temp(priv);
+	if (ret < 0)
+		return;
+
+	rcar_thermal_irq_enable(priv);
+
+	thermal_zone_device_update(priv->zone, THERMAL_EVENT_UNSPECIFIED);
+}
+
+static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status)
+{
+	struct device *dev = rcar_priv_to_dev(priv);
+
+	status = (status >> rcar_id_to_shift(priv)) & 0x3;
+
+	if (status) {
+		dev_dbg(dev, "thermal%d %s%s\n",
+			priv->id,
+			(status & 0x2) ? "Rising " : "",
+			(status & 0x1) ? "Falling" : "");
+	}
+
+	return status;
+}
+
+static irqreturn_t rcar_thermal_irq(int irq, void *data)
+{
+	struct rcar_thermal_common *common = data;
+	struct rcar_thermal_priv *priv;
+	u32 status, mask;
+
+	spin_lock(&common->lock);
+
+	mask	= rcar_thermal_common_read(common, INTMSK);
+	status	= rcar_thermal_common_read(common, STR);
+	rcar_thermal_common_write(common, STR, 0x000F0F0F & mask);
+
+	spin_unlock(&common->lock);
+
+	status = status & ~mask;
+
+	/*
+	 * check the status
+	 */
+	rcar_thermal_for_each_priv(priv, common) {
+		if (rcar_thermal_had_changed(priv, status)) {
+			rcar_thermal_irq_disable(priv);
+			queue_delayed_work(system_freezable_wq, &priv->work,
+					   msecs_to_jiffies(300));
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *		platform functions
+ */
+static int rcar_thermal_remove(struct platform_device *pdev)
+{
+	struct rcar_thermal_common *common = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct rcar_thermal_priv *priv;
+
+	rcar_thermal_for_each_priv(priv, common) {
+		rcar_thermal_irq_disable(priv);
+		cancel_delayed_work_sync(&priv->work);
+		if (priv->chip->use_of_thermal)
+			thermal_remove_hwmon_sysfs(priv->zone);
+		else
+			thermal_zone_device_unregister(priv->zone);
+	}
+
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int rcar_thermal_probe(struct platform_device *pdev)
+{
+	struct rcar_thermal_common *common;
+	struct rcar_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
+	int mres = 0;
+	int i;
+	int ret = -ENODEV;
+	int idle = IDLE_INTERVAL;
+	u32 enr_bits = 0;
+
+	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
+	if (!common)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, common);
+
+	INIT_LIST_HEAD(&common->head);
+	spin_lock_init(&common->lock);
+	common->dev = dev;
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	for (i = 0; i < chip->nirqs; i++) {
+		int irq;
+
+		ret = platform_get_irq_optional(pdev, i);
+		if (ret < 0 && ret != -ENXIO)
+			goto error_unregister;
+		if (ret > 0)
+			irq = ret;
+		else
+			break;
+
+		if (!common->base) {
+			/*
+			 * platform has IRQ support.
+			 * Then, driver uses common registers
+			 * rcar_has_irq_support() will be enabled
+			 */
+			res = platform_get_resource(pdev, IORESOURCE_MEM,
+						    mres++);
+			common->base = devm_ioremap_resource(dev, res);
+			if (IS_ERR(common->base)) {
+				ret = PTR_ERR(common->base);
+				goto error_unregister;
+			}
+
+			idle = 0; /* polling delay is not needed */
+		}
+
+		ret = devm_request_irq(dev, irq, rcar_thermal_irq,
+				       IRQF_SHARED, dev_name(dev), common);
+		if (ret) {
+			dev_err(dev, "irq request failed\n ");
+			goto error_unregister;
+		}
+
+		/* update ENR bits */
+		if (chip->irq_per_ch)
+			enr_bits |= 1 << i;
+	}
+
+	for (i = 0;; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
+		if (!res)
+			break;
+
+		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+		if (!priv) {
+			ret = -ENOMEM;
+			goto error_unregister;
+		}
+
+		priv->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->base)) {
+			ret = PTR_ERR(priv->base);
+			goto error_unregister;
+		}
+
+		priv->common = common;
+		priv->id = i;
+		priv->chip = chip;
+		mutex_init(&priv->lock);
+		INIT_LIST_HEAD(&priv->list);
+		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			goto error_unregister;
+
+		if (chip->use_of_thermal) {
+			priv->zone = devm_thermal_of_zone_register(
+						dev, i, priv,
+						&rcar_thermal_zone_of_ops);
+		} else {
+			priv->zone = thermal_zone_device_register(
+						"rcar_thermal",
+						1, 0, priv,
+						&rcar_thermal_zone_ops, NULL, 0,
+						idle);
+
+			ret = thermal_zone_device_enable(priv->zone);
+			if (ret) {
+				thermal_zone_device_unregister(priv->zone);
+				priv->zone = ERR_PTR(ret);
+			}
+		}
+		if (IS_ERR(priv->zone)) {
+			dev_err(dev, "can't register thermal zone\n");
+			ret = PTR_ERR(priv->zone);
+			priv->zone = NULL;
+			goto error_unregister;
+		}
+
+		if (chip->use_of_thermal) {
+			/*
+			 * thermal_zone doesn't enable hwmon as default,
+			 * but, enable it here to keep compatible
+			 */
+			priv->zone->tzp->no_hwmon = false;
+			ret = thermal_add_hwmon_sysfs(priv->zone);
+			if (ret)
+				goto error_unregister;
+		}
+
+		rcar_thermal_irq_enable(priv);
+
+		list_move_tail(&priv->list, &common->head);
+
+		/* update ENR bits */
+		if (!chip->irq_per_ch)
+			enr_bits |= 3 << (i * 8);
+	}
+
+	if (common->base && enr_bits)
+		rcar_thermal_common_write(common, ENR, enr_bits);
+
+	dev_info(dev, "%d sensor probed\n", i);
+
+	return 0;
+
+error_unregister:
+	rcar_thermal_remove(pdev);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+
+	if (priv->chip->needs_suspend_resume) {
+		rcar_thermal_common_write(common, ENR, 0);
+		rcar_thermal_irq_disable(priv);
+		rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+	}
+
+	return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+	int ret;
+
+	if (priv->chip->needs_suspend_resume) {
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+		rcar_thermal_irq_enable(priv);
+		rcar_thermal_common_write(common, ENR, 0x03);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+			 rcar_thermal_resume);
+
+static struct platform_driver rcar_thermal_driver = {
+	.driver	= {
+		.name	= "rcar_thermal",
+		.pm = &rcar_thermal_pm_ops,
+		.of_match_table = rcar_thermal_dt_ids,
+	},
+	.probe		= rcar_thermal_probe,
+	.remove		= rcar_thermal_remove,
+};
+module_platform_driver(rcar_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
new file mode 100644
index 000000000..819e059cd
--- /dev/null
+++ b/drivers/thermal/rockchip_thermal.c
@@ -0,0 +1,1580 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2016, Fuzhou Rockchip Electronics Co., Ltd
+ * Caesar Wang <wxt@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/mfd/syscon.h>
+#include <linux/pinctrl/consumer.h>
+
+/*
+ * If the temperature over a period of time High,
+ * the resulting TSHUT gave CRU module,let it reset the entire chip,
+ * or via GPIO give PMIC.
+ */
+enum tshut_mode {
+	TSHUT_MODE_CRU = 0,
+	TSHUT_MODE_GPIO,
+};
+
+/*
+ * The system Temperature Sensors tshut(tshut) polarity
+ * the bit 8 is tshut polarity.
+ * 0: low active, 1: high active
+ */
+enum tshut_polarity {
+	TSHUT_LOW_ACTIVE = 0,
+	TSHUT_HIGH_ACTIVE,
+};
+
+/*
+ * The system has two Temperature Sensors.
+ * sensor0 is for CPU, and sensor1 is for GPU.
+ */
+enum sensor_id {
+	SENSOR_CPU = 0,
+	SENSOR_GPU,
+};
+
+/*
+ * The conversion table has the adc value and temperature.
+ * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
+ * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table)
+ */
+enum adc_sort_mode {
+	ADC_DECREMENT = 0,
+	ADC_INCREMENT,
+};
+
+#include "thermal_hwmon.h"
+
+/**
+ * The max sensors is two in rockchip SoCs.
+ * Two sensors: CPU and GPU sensor.
+ */
+#define SOC_MAX_SENSORS	2
+
+/**
+ * struct chip_tsadc_table - hold information about chip-specific differences
+ * @id: conversion table
+ * @length: size of conversion table
+ * @data_mask: mask to apply on data inputs
+ * @mode: sort mode of this adc variant (incrementing or decrementing)
+ */
+struct chip_tsadc_table {
+	const struct tsadc_table *id;
+	unsigned int length;
+	u32 data_mask;
+	enum adc_sort_mode mode;
+};
+
+/**
+ * struct rockchip_tsadc_chip - hold the private data of tsadc chip
+ * @chn_id: array of sensor ids of chip corresponding to the channel
+ * @chn_num: the channel number of tsadc chip
+ * @tshut_temp: the hardware-controlled shutdown temperature value
+ * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
+ * @initialize: SoC special initialize tsadc controller method
+ * @irq_ack: clear the interrupt
+ * @control: enable/disable method for the tsadc controller
+ * @get_temp: get the temperature
+ * @set_alarm_temp: set the high temperature interrupt
+ * @set_tshut_temp: set the hardware-controlled shutdown temperature
+ * @set_tshut_mode: set the hardware-controlled shutdown mode
+ * @table: the chip-specific conversion table
+ */
+struct rockchip_tsadc_chip {
+	/* The sensor id of chip correspond to the ADC channel */
+	int chn_id[SOC_MAX_SENSORS];
+	int chn_num;
+
+	/* The hardware-controlled tshut property */
+	int tshut_temp;
+	enum tshut_mode tshut_mode;
+	enum tshut_polarity tshut_polarity;
+
+	/* Chip-wide methods */
+	void (*initialize)(struct regmap *grf,
+			   void __iomem *reg, enum tshut_polarity p);
+	void (*irq_ack)(void __iomem *reg);
+	void (*control)(void __iomem *reg, bool on);
+
+	/* Per-sensor methods */
+	int (*get_temp)(const struct chip_tsadc_table *table,
+			int chn, void __iomem *reg, int *temp);
+	int (*set_alarm_temp)(const struct chip_tsadc_table *table,
+			      int chn, void __iomem *reg, int temp);
+	int (*set_tshut_temp)(const struct chip_tsadc_table *table,
+			      int chn, void __iomem *reg, int temp);
+	void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
+
+	/* Per-table methods */
+	struct chip_tsadc_table table;
+};
+
+/**
+ * struct rockchip_thermal_sensor - hold the information of thermal sensor
+ * @thermal:  pointer to the platform/configuration data
+ * @tzd: pointer to a thermal zone
+ * @id: identifier of the thermal sensor
+ */
+struct rockchip_thermal_sensor {
+	struct rockchip_thermal_data *thermal;
+	struct thermal_zone_device *tzd;
+	int id;
+};
+
+/**
+ * struct rockchip_thermal_data - hold the private data of thermal driver
+ * @chip: pointer to the platform/configuration data
+ * @pdev: platform device of thermal
+ * @reset: the reset controller of tsadc
+ * @sensors: array of thermal sensors
+ * @clk: the controller clock is divided by the exteral 24MHz
+ * @pclk: the advanced peripherals bus clock
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_temp: the hardware-controlled shutdown temperature value
+ * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
+ */
+struct rockchip_thermal_data {
+	const struct rockchip_tsadc_chip *chip;
+	struct platform_device *pdev;
+	struct reset_control *reset;
+
+	struct rockchip_thermal_sensor sensors[SOC_MAX_SENSORS];
+
+	struct clk *clk;
+	struct clk *pclk;
+
+	struct regmap *grf;
+	void __iomem *regs;
+
+	int tshut_temp;
+	enum tshut_mode tshut_mode;
+	enum tshut_polarity tshut_polarity;
+};
+
+/**
+ * TSADC Sensor Register description:
+ *
+ * TSADCV2_* are used for RK3288 SoCs, the other chips can reuse it.
+ * TSADCV3_* are used for newer SoCs than RK3288. (e.g: RK3228, RK3399)
+ *
+ */
+#define TSADCV2_USER_CON			0x00
+#define TSADCV2_AUTO_CON			0x04
+#define TSADCV2_INT_EN				0x08
+#define TSADCV2_INT_PD				0x0c
+#define TSADCV2_DATA(chn)			(0x20 + (chn) * 0x04)
+#define TSADCV2_COMP_INT(chn)		        (0x30 + (chn) * 0x04)
+#define TSADCV2_COMP_SHUT(chn)		        (0x40 + (chn) * 0x04)
+#define TSADCV2_HIGHT_INT_DEBOUNCE		0x60
+#define TSADCV2_HIGHT_TSHUT_DEBOUNCE		0x64
+#define TSADCV2_AUTO_PERIOD			0x68
+#define TSADCV2_AUTO_PERIOD_HT			0x6c
+
+#define TSADCV2_AUTO_EN				BIT(0)
+#define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
+#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
+
+#define TSADCV3_AUTO_Q_SEL_EN			BIT(1)
+
+#define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
+#define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
+#define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
+
+#define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
+#define TSADCV3_INT_PD_CLEAR_MASK		~BIT(16)
+
+#define TSADCV2_DATA_MASK			0xfff
+#define TSADCV3_DATA_MASK			0x3ff
+
+#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
+#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT	4
+#define TSADCV2_AUTO_PERIOD_TIME		250 /* 250ms */
+#define TSADCV2_AUTO_PERIOD_HT_TIME		50  /* 50ms */
+#define TSADCV3_AUTO_PERIOD_TIME		1875 /* 2.5ms */
+#define TSADCV3_AUTO_PERIOD_HT_TIME		1875 /* 2.5ms */
+
+#define TSADCV5_AUTO_PERIOD_TIME		1622 /* 2.5ms */
+#define TSADCV5_AUTO_PERIOD_HT_TIME		1622 /* 2.5ms */
+
+#define TSADCV2_USER_INTER_PD_SOC		0x340 /* 13 clocks */
+#define TSADCV5_USER_INTER_PD_SOC		0xfc0 /* 97us, at least 90us */
+
+#define GRF_SARADC_TESTBIT			0x0e644
+#define GRF_TSADC_TESTBIT_L			0x0e648
+#define GRF_TSADC_TESTBIT_H			0x0e64c
+
+#define PX30_GRF_SOC_CON2			0x0408
+
+#define RK3568_GRF_TSADC_CON			0x0600
+#define RK3568_GRF_TSADC_ANA_REG0		(0x10001 << 0)
+#define RK3568_GRF_TSADC_ANA_REG1		(0x10001 << 1)
+#define RK3568_GRF_TSADC_ANA_REG2		(0x10001 << 2)
+#define RK3568_GRF_TSADC_TSEN			(0x10001 << 8)
+
+#define GRF_SARADC_TESTBIT_ON			(0x10001 << 2)
+#define GRF_TSADC_TESTBIT_H_ON			(0x10001 << 2)
+#define GRF_TSADC_VCM_EN_L			(0x10001 << 7)
+#define GRF_TSADC_VCM_EN_H			(0x10001 << 7)
+
+#define GRF_CON_TSADC_CH_INV			(0x10001 << 1)
+
+/**
+ * struct tsadc_table - code to temperature conversion table
+ * @code: the value of adc channel
+ * @temp: the temperature
+ * Note:
+ * code to temperature mapping of the temperature sensor is a piece wise linear
+ * curve.Any temperature, code faling between to 2 give temperatures can be
+ * linearly interpolated.
+ * Code to Temperature mapping should be updated based on manufacturer results.
+ */
+struct tsadc_table {
+	u32 code;
+	int temp;
+};
+
+static const struct tsadc_table rv1108_table[] = {
+	{0, -40000},
+	{374, -40000},
+	{382, -35000},
+	{389, -30000},
+	{397, -25000},
+	{405, -20000},
+	{413, -15000},
+	{421, -10000},
+	{429, -5000},
+	{436, 0},
+	{444, 5000},
+	{452, 10000},
+	{460, 15000},
+	{468, 20000},
+	{476, 25000},
+	{483, 30000},
+	{491, 35000},
+	{499, 40000},
+	{507, 45000},
+	{515, 50000},
+	{523, 55000},
+	{531, 60000},
+	{539, 65000},
+	{547, 70000},
+	{555, 75000},
+	{562, 80000},
+	{570, 85000},
+	{578, 90000},
+	{586, 95000},
+	{594, 100000},
+	{602, 105000},
+	{610, 110000},
+	{618, 115000},
+	{626, 120000},
+	{634, 125000},
+	{TSADCV2_DATA_MASK, 125000},
+};
+
+static const struct tsadc_table rk3228_code_table[] = {
+	{0, -40000},
+	{588, -40000},
+	{593, -35000},
+	{598, -30000},
+	{603, -25000},
+	{608, -20000},
+	{613, -15000},
+	{618, -10000},
+	{623, -5000},
+	{629, 0},
+	{634, 5000},
+	{639, 10000},
+	{644, 15000},
+	{649, 20000},
+	{654, 25000},
+	{660, 30000},
+	{665, 35000},
+	{670, 40000},
+	{675, 45000},
+	{681, 50000},
+	{686, 55000},
+	{691, 60000},
+	{696, 65000},
+	{702, 70000},
+	{707, 75000},
+	{712, 80000},
+	{717, 85000},
+	{723, 90000},
+	{728, 95000},
+	{733, 100000},
+	{738, 105000},
+	{744, 110000},
+	{749, 115000},
+	{754, 120000},
+	{760, 125000},
+	{TSADCV2_DATA_MASK, 125000},
+};
+
+static const struct tsadc_table rk3288_code_table[] = {
+	{TSADCV2_DATA_MASK, -40000},
+	{3800, -40000},
+	{3792, -35000},
+	{3783, -30000},
+	{3774, -25000},
+	{3765, -20000},
+	{3756, -15000},
+	{3747, -10000},
+	{3737, -5000},
+	{3728, 0},
+	{3718, 5000},
+	{3708, 10000},
+	{3698, 15000},
+	{3688, 20000},
+	{3678, 25000},
+	{3667, 30000},
+	{3656, 35000},
+	{3645, 40000},
+	{3634, 45000},
+	{3623, 50000},
+	{3611, 55000},
+	{3600, 60000},
+	{3588, 65000},
+	{3575, 70000},
+	{3563, 75000},
+	{3550, 80000},
+	{3537, 85000},
+	{3524, 90000},
+	{3510, 95000},
+	{3496, 100000},
+	{3482, 105000},
+	{3467, 110000},
+	{3452, 115000},
+	{3437, 120000},
+	{3421, 125000},
+	{0, 125000},
+};
+
+static const struct tsadc_table rk3328_code_table[] = {
+	{0, -40000},
+	{296, -40000},
+	{304, -35000},
+	{313, -30000},
+	{331, -20000},
+	{340, -15000},
+	{349, -10000},
+	{359, -5000},
+	{368, 0},
+	{378, 5000},
+	{388, 10000},
+	{398, 15000},
+	{408, 20000},
+	{418, 25000},
+	{429, 30000},
+	{440, 35000},
+	{451, 40000},
+	{462, 45000},
+	{473, 50000},
+	{485, 55000},
+	{496, 60000},
+	{508, 65000},
+	{521, 70000},
+	{533, 75000},
+	{546, 80000},
+	{559, 85000},
+	{572, 90000},
+	{586, 95000},
+	{600, 100000},
+	{614, 105000},
+	{629, 110000},
+	{644, 115000},
+	{659, 120000},
+	{675, 125000},
+	{TSADCV2_DATA_MASK, 125000},
+};
+
+static const struct tsadc_table rk3368_code_table[] = {
+	{0, -40000},
+	{106, -40000},
+	{108, -35000},
+	{110, -30000},
+	{112, -25000},
+	{114, -20000},
+	{116, -15000},
+	{118, -10000},
+	{120, -5000},
+	{122, 0},
+	{124, 5000},
+	{126, 10000},
+	{128, 15000},
+	{130, 20000},
+	{132, 25000},
+	{134, 30000},
+	{136, 35000},
+	{138, 40000},
+	{140, 45000},
+	{142, 50000},
+	{144, 55000},
+	{146, 60000},
+	{148, 65000},
+	{150, 70000},
+	{152, 75000},
+	{154, 80000},
+	{156, 85000},
+	{158, 90000},
+	{160, 95000},
+	{162, 100000},
+	{163, 105000},
+	{165, 110000},
+	{167, 115000},
+	{169, 120000},
+	{171, 125000},
+	{TSADCV3_DATA_MASK, 125000},
+};
+
+static const struct tsadc_table rk3399_code_table[] = {
+	{0, -40000},
+	{402, -40000},
+	{410, -35000},
+	{419, -30000},
+	{427, -25000},
+	{436, -20000},
+	{444, -15000},
+	{453, -10000},
+	{461, -5000},
+	{470, 0},
+	{478, 5000},
+	{487, 10000},
+	{496, 15000},
+	{504, 20000},
+	{513, 25000},
+	{521, 30000},
+	{530, 35000},
+	{538, 40000},
+	{547, 45000},
+	{555, 50000},
+	{564, 55000},
+	{573, 60000},
+	{581, 65000},
+	{590, 70000},
+	{599, 75000},
+	{607, 80000},
+	{616, 85000},
+	{624, 90000},
+	{633, 95000},
+	{642, 100000},
+	{650, 105000},
+	{659, 110000},
+	{668, 115000},
+	{677, 120000},
+	{685, 125000},
+	{TSADCV3_DATA_MASK, 125000},
+};
+
+static const struct tsadc_table rk3568_code_table[] = {
+	{0, -40000},
+	{1584, -40000},
+	{1620, -35000},
+	{1652, -30000},
+	{1688, -25000},
+	{1720, -20000},
+	{1756, -15000},
+	{1788, -10000},
+	{1824, -5000},
+	{1856, 0},
+	{1892, 5000},
+	{1924, 10000},
+	{1956, 15000},
+	{1992, 20000},
+	{2024, 25000},
+	{2060, 30000},
+	{2092, 35000},
+	{2128, 40000},
+	{2160, 45000},
+	{2196, 50000},
+	{2228, 55000},
+	{2264, 60000},
+	{2300, 65000},
+	{2332, 70000},
+	{2368, 75000},
+	{2400, 80000},
+	{2436, 85000},
+	{2468, 90000},
+	{2500, 95000},
+	{2536, 100000},
+	{2572, 105000},
+	{2604, 110000},
+	{2636, 115000},
+	{2672, 120000},
+	{2704, 125000},
+	{TSADCV2_DATA_MASK, 125000},
+};
+
+static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table,
+				   int temp)
+{
+	int high, low, mid;
+	unsigned long num;
+	unsigned int denom;
+	u32 error = table->data_mask;
+
+	low = 0;
+	high = (table->length - 1) - 1; /* ignore the last check for table */
+	mid = (high + low) / 2;
+
+	/* Return mask code data when the temp is over table range */
+	if (temp < table->id[low].temp || temp > table->id[high].temp)
+		goto exit;
+
+	while (low <= high) {
+		if (temp == table->id[mid].temp)
+			return table->id[mid].code;
+		else if (temp < table->id[mid].temp)
+			high = mid - 1;
+		else
+			low = mid + 1;
+		mid = (low + high) / 2;
+	}
+
+	/*
+	 * The conversion code granularity provided by the table. Let's
+	 * assume that the relationship between temperature and
+	 * analog value between 2 table entries is linear and interpolate
+	 * to produce less granular result.
+	 */
+	num = abs(table->id[mid + 1].code - table->id[mid].code);
+	num *= temp - table->id[mid].temp;
+	denom = table->id[mid + 1].temp - table->id[mid].temp;
+
+	switch (table->mode) {
+	case ADC_DECREMENT:
+		return table->id[mid].code - (num / denom);
+	case ADC_INCREMENT:
+		return table->id[mid].code + (num / denom);
+	default:
+		pr_err("%s: unknown table mode: %d\n", __func__, table->mode);
+		return error;
+	}
+
+exit:
+	pr_err("%s: invalid temperature, temp=%d error=%d\n",
+	       __func__, temp, error);
+	return error;
+}
+
+static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table,
+				   u32 code, int *temp)
+{
+	unsigned int low = 1;
+	unsigned int high = table->length - 1;
+	unsigned int mid = (low + high) / 2;
+	unsigned int num;
+	unsigned long denom;
+
+	WARN_ON(table->length < 2);
+
+	switch (table->mode) {
+	case ADC_DECREMENT:
+		code &= table->data_mask;
+		if (code <= table->id[high].code)
+			return -EAGAIN;		/* Incorrect reading */
+
+		while (low <= high) {
+			if (code >= table->id[mid].code &&
+			    code < table->id[mid - 1].code)
+				break;
+			else if (code < table->id[mid].code)
+				low = mid + 1;
+			else
+				high = mid - 1;
+
+			mid = (low + high) / 2;
+		}
+		break;
+	case ADC_INCREMENT:
+		code &= table->data_mask;
+		if (code < table->id[low].code)
+			return -EAGAIN;		/* Incorrect reading */
+
+		while (low <= high) {
+			if (code <= table->id[mid].code &&
+			    code > table->id[mid - 1].code)
+				break;
+			else if (code > table->id[mid].code)
+				low = mid + 1;
+			else
+				high = mid - 1;
+
+			mid = (low + high) / 2;
+		}
+		break;
+	default:
+		pr_err("%s: unknown table mode: %d\n", __func__, table->mode);
+		return -EINVAL;
+	}
+
+	/*
+	 * The 5C granularity provided by the table is too much. Let's
+	 * assume that the relationship between sensor readings and
+	 * temperature between 2 table entries is linear and interpolate
+	 * to produce less granular result.
+	 */
+	num = table->id[mid].temp - table->id[mid - 1].temp;
+	num *= abs(table->id[mid - 1].code - code);
+	denom = abs(table->id[mid - 1].code - table->id[mid].code);
+	*temp = table->id[mid - 1].temp + (num / denom);
+
+	return 0;
+}
+
+/**
+ * rk_tsadcv2_initialize - initialize TASDC Controller.
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
+ *
+ * (1) Set TSADC_V2_AUTO_PERIOD:
+ *     Configure the interleave between every two accessing of
+ *     TSADC in normal operation.
+ *
+ * (2) Set TSADCV2_AUTO_PERIOD_HT:
+ *     Configure the interleave between every two accessing of
+ *     TSADC after the temperature is higher than COM_SHUT or COM_INT.
+ *
+ * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE:
+ *     If the temperature is higher than COMP_INT or COMP_SHUT for
+ *     "debounce" times, TSADC controller will generate interrupt or TSHUT.
+ */
+static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+		writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+			       regs + TSADCV2_AUTO_CON);
+	else
+		writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+			       regs + TSADCV2_AUTO_CON);
+
+	writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
+	writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+		       regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+	writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
+		       regs + TSADCV2_AUTO_PERIOD_HT);
+	writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+}
+
+/**
+ * rk_tsadcv3_initialize - initialize TASDC Controller.
+ * @grf: the general register file will be used to do static set by software
+ * @regs: the base address of tsadc controller
+ * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
+ *
+ * (1) The tsadc control power sequence.
+ *
+ * (2) Set TSADC_V2_AUTO_PERIOD:
+ *     Configure the interleave between every two accessing of
+ *     TSADC in normal operation.
+ *
+ * (2) Set TSADCV2_AUTO_PERIOD_HT:
+ *     Configure the interleave between every two accessing of
+ *     TSADC after the temperature is higher than COM_SHUT or COM_INT.
+ *
+ * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE:
+ *     If the temperature is higher than COMP_INT or COMP_SHUT for
+ *     "debounce" times, TSADC controller will generate interrupt or TSHUT.
+ */
+static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	/* The tsadc control power sequence */
+	if (IS_ERR(grf)) {
+		/* Set interleave value to workround ic time sync issue */
+		writel_relaxed(TSADCV2_USER_INTER_PD_SOC, regs +
+			       TSADCV2_USER_CON);
+
+		writel_relaxed(TSADCV2_AUTO_PERIOD_TIME,
+			       regs + TSADCV2_AUTO_PERIOD);
+		writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+			       regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+		writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
+			       regs + TSADCV2_AUTO_PERIOD_HT);
+		writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+			       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+
+	} else {
+		/* Enable the voltage common mode feature */
+		regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_VCM_EN_L);
+		regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_VCM_EN_H);
+
+		usleep_range(15, 100); /* The spec note says at least 15 us */
+		regmap_write(grf, GRF_SARADC_TESTBIT, GRF_SARADC_TESTBIT_ON);
+		regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_TESTBIT_H_ON);
+		usleep_range(90, 200); /* The spec note says at least 90 us */
+
+		writel_relaxed(TSADCV3_AUTO_PERIOD_TIME,
+			       regs + TSADCV2_AUTO_PERIOD);
+		writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+			       regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+		writel_relaxed(TSADCV3_AUTO_PERIOD_HT_TIME,
+			       regs + TSADCV2_AUTO_PERIOD_HT);
+		writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+			       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+	}
+
+	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+		writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+			       regs + TSADCV2_AUTO_CON);
+	else
+		writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+			       regs + TSADCV2_AUTO_CON);
+}
+
+static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	rk_tsadcv2_initialize(grf, regs, tshut_polarity);
+	regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV);
+}
+
+static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	writel_relaxed(TSADCV5_USER_INTER_PD_SOC, regs + TSADCV2_USER_CON);
+	writel_relaxed(TSADCV5_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
+	writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+		       regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+	writel_relaxed(TSADCV5_AUTO_PERIOD_HT_TIME,
+		       regs + TSADCV2_AUTO_PERIOD_HT);
+	writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+
+	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+		writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+			       regs + TSADCV2_AUTO_CON);
+	else
+		writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+			       regs + TSADCV2_AUTO_CON);
+
+	/*
+	 * The general register file will is optional
+	 * and might not be available.
+	 */
+	if (!IS_ERR(grf)) {
+		regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_TSEN);
+		/*
+		 * RK3568 TRM, section 18.5. requires a delay no less
+		 * than 10us between the rising edge of tsadc_tsen_en
+		 * and the rising edge of tsadc_ana_reg_0/1/2.
+		 */
+		udelay(15);
+		regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG0);
+		regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG1);
+		regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG2);
+
+		/*
+		 * RK3568 TRM, section 18.5. requires a delay no less
+		 * than 90us after the rising edge of tsadc_ana_reg_0/1/2.
+		 */
+		usleep_range(100, 200);
+	}
+}
+
+static void rk_tsadcv2_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
+static void rk_tsadcv3_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV3_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
+static void rk_tsadcv2_control(void __iomem *regs, bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
+	if (enable)
+		val |= TSADCV2_AUTO_EN;
+	else
+		val &= ~TSADCV2_AUTO_EN;
+
+	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
+}
+
+/**
+ * rk_tsadcv3_control - the tsadc controller is enabled or disabled.
+ * @regs: the base address of tsadc controller
+ * @enable: boolean flag to enable the controller
+ *
+ * NOTE: TSADC controller works at auto mode, and some SoCs need set the
+ * tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output
+ * adc value if setting this bit to enable.
+ */
+static void rk_tsadcv3_control(void __iomem *regs, bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
+	if (enable)
+		val |= TSADCV2_AUTO_EN | TSADCV3_AUTO_Q_SEL_EN;
+	else
+		val &= ~TSADCV2_AUTO_EN;
+
+	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
+}
+
+static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
+			       int chn, void __iomem *regs, int *temp)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_DATA(chn));
+
+	return rk_tsadcv2_code_to_temp(table, val, temp);
+}
+
+static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
+				 int chn, void __iomem *regs, int temp)
+{
+	u32 alarm_value;
+	u32 int_en, int_clr;
+
+	/*
+	 * In some cases, some sensors didn't need the trip points, the
+	 * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm
+	 * in the end, ignore this case and disable the high temperature
+	 * interrupt.
+	 */
+	if (temp == INT_MAX) {
+		int_clr = readl_relaxed(regs + TSADCV2_INT_EN);
+		int_clr &= ~TSADCV2_INT_SRC_EN(chn);
+		writel_relaxed(int_clr, regs + TSADCV2_INT_EN);
+		return 0;
+	}
+
+	/* Make sure the value is valid */
+	alarm_value = rk_tsadcv2_temp_to_code(table, temp);
+	if (alarm_value == table->data_mask)
+		return -ERANGE;
+
+	writel_relaxed(alarm_value & table->data_mask,
+		       regs + TSADCV2_COMP_INT(chn));
+
+	int_en = readl_relaxed(regs + TSADCV2_INT_EN);
+	int_en |= TSADCV2_INT_SRC_EN(chn);
+	writel_relaxed(int_en, regs + TSADCV2_INT_EN);
+
+	return 0;
+}
+
+static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
+				 int chn, void __iomem *regs, int temp)
+{
+	u32 tshut_value, val;
+
+	/* Make sure the value is valid */
+	tshut_value = rk_tsadcv2_temp_to_code(table, temp);
+	if (tshut_value == table->data_mask)
+		return -ERANGE;
+
+	writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
+
+	/* TSHUT will be valid */
+	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
+	writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON);
+
+	return 0;
+}
+
+static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
+				  enum tshut_mode mode)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_INT_EN);
+	if (mode == TSHUT_MODE_GPIO) {
+		val &= ~TSADCV2_SHUT_2CRU_SRC_EN(chn);
+		val |= TSADCV2_SHUT_2GPIO_SRC_EN(chn);
+	} else {
+		val &= ~TSADCV2_SHUT_2GPIO_SRC_EN(chn);
+		val |= TSADCV2_SHUT_2CRU_SRC_EN(chn);
+	}
+
+	writel_relaxed(val, regs + TSADCV2_INT_EN);
+}
+
+static const struct rockchip_tsadc_chip px30_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* 2 channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv4_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3328_code_table,
+		.length = ARRAY_SIZE(rk3328_code_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rv1108_table,
+		.length = ARRAY_SIZE(rv1108_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3228_code_table,
+		.length = ARRAY_SIZE(rk3228_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
+	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv2_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3288_code_table,
+		.length = ARRAY_SIZE(rk3288_code_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3328_code_table,
+		.length = ARRAY_SIZE(rk3328_code_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv3_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3228_code_table,
+		.length = ARRAY_SIZE(rk3228_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv2_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3368_code_table,
+		.length = ARRAY_SIZE(rk3368_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv3_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3399_code_table,
+		.length = ARRAY_SIZE(rk3399_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv7_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3568_code_table,
+		.length = ARRAY_SIZE(rk3568_code_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
+static const struct of_device_id of_rockchip_thermal_match[] = {
+	{	.compatible = "rockchip,px30-tsadc",
+		.data = (void *)&px30_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rv1108-tsadc",
+		.data = (void *)&rv1108_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3228-tsadc",
+		.data = (void *)&rk3228_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3288-tsadc",
+		.data = (void *)&rk3288_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3328-tsadc",
+		.data = (void *)&rk3328_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3366-tsadc",
+		.data = (void *)&rk3366_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3368-tsadc",
+		.data = (void *)&rk3368_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3399-tsadc",
+		.data = (void *)&rk3399_tsadc_data,
+	},
+	{
+		.compatible = "rockchip,rk3568-tsadc",
+		.data = (void *)&rk3568_tsadc_data,
+	},
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
+
+static void
+rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on)
+{
+	struct thermal_zone_device *tzd = sensor->tzd;
+
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
+}
+
+static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
+{
+	struct rockchip_thermal_data *thermal = dev;
+	int i;
+
+	dev_dbg(&thermal->pdev->dev, "thermal alarm\n");
+
+	thermal->chip->irq_ack(thermal->regs);
+
+	for (i = 0; i < thermal->chip->chn_num; i++)
+		thermal_zone_device_update(thermal->sensors[i].tzd,
+					   THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static int rockchip_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct rockchip_thermal_sensor *sensor = tz->devdata;
+	struct rockchip_thermal_data *thermal = sensor->thermal;
+	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
+
+	dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n",
+		__func__, sensor->id, low, high);
+
+	return tsadc->set_alarm_temp(&tsadc->table,
+				     sensor->id, thermal->regs, high);
+}
+
+static int rockchip_thermal_get_temp(struct thermal_zone_device *tz, int *out_temp)
+{
+	struct rockchip_thermal_sensor *sensor = tz->devdata;
+	struct rockchip_thermal_data *thermal = sensor->thermal;
+	const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip;
+	int retval;
+
+	retval = tsadc->get_temp(&tsadc->table,
+				 sensor->id, thermal->regs, out_temp);
+	dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n",
+		sensor->id, *out_temp, retval);
+
+	return retval;
+}
+
+static const struct thermal_zone_device_ops rockchip_of_thermal_ops = {
+	.get_temp = rockchip_thermal_get_temp,
+	.set_trips = rockchip_thermal_set_trips,
+};
+
+static int rockchip_configure_from_dt(struct device *dev,
+				      struct device_node *np,
+				      struct rockchip_thermal_data *thermal)
+{
+	u32 shut_temp, tshut_mode, tshut_polarity;
+
+	if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
+		dev_warn(dev,
+			 "Missing tshut temp property, using default %d\n",
+			 thermal->chip->tshut_temp);
+		thermal->tshut_temp = thermal->chip->tshut_temp;
+	} else {
+		if (shut_temp > INT_MAX) {
+			dev_err(dev, "Invalid tshut temperature specified: %d\n",
+				shut_temp);
+			return -ERANGE;
+		}
+		thermal->tshut_temp = shut_temp;
+	}
+
+	if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
+		dev_warn(dev,
+			 "Missing tshut mode property, using default (%s)\n",
+			 thermal->chip->tshut_mode == TSHUT_MODE_GPIO ?
+				"gpio" : "cru");
+		thermal->tshut_mode = thermal->chip->tshut_mode;
+	} else {
+		thermal->tshut_mode = tshut_mode;
+	}
+
+	if (thermal->tshut_mode > 1) {
+		dev_err(dev, "Invalid tshut mode specified: %d\n",
+			thermal->tshut_mode);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(np, "rockchip,hw-tshut-polarity",
+				 &tshut_polarity)) {
+		dev_warn(dev,
+			 "Missing tshut-polarity property, using default (%s)\n",
+			 thermal->chip->tshut_polarity == TSHUT_LOW_ACTIVE ?
+				"low" : "high");
+		thermal->tshut_polarity = thermal->chip->tshut_polarity;
+	} else {
+		thermal->tshut_polarity = tshut_polarity;
+	}
+
+	if (thermal->tshut_polarity > 1) {
+		dev_err(dev, "Invalid tshut-polarity specified: %d\n",
+			thermal->tshut_polarity);
+		return -EINVAL;
+	}
+
+	/* The tsadc wont to handle the error in here since some SoCs didn't
+	 * need this property.
+	 */
+	thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(thermal->grf))
+		dev_warn(dev, "Missing rockchip,grf property\n");
+
+	return 0;
+}
+
+static int
+rockchip_thermal_register_sensor(struct platform_device *pdev,
+				 struct rockchip_thermal_data *thermal,
+				 struct rockchip_thermal_sensor *sensor,
+				 int id)
+{
+	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
+	int error;
+
+	tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
+
+	error = tsadc->set_tshut_temp(&tsadc->table, id, thermal->regs,
+			      thermal->tshut_temp);
+	if (error)
+		dev_err(&pdev->dev, "%s: invalid tshut=%d, error=%d\n",
+			__func__, thermal->tshut_temp, error);
+
+	sensor->thermal = thermal;
+	sensor->id = id;
+	sensor->tzd = devm_thermal_of_zone_register(&pdev->dev, id, sensor,
+						    &rockchip_of_thermal_ops);
+	if (IS_ERR(sensor->tzd)) {
+		error = PTR_ERR(sensor->tzd);
+		dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
+			id, error);
+		return error;
+	}
+
+	return 0;
+}
+
+/**
+ * Reset TSADC Controller, reset all tsadc registers.
+ * @reset: the reset controller of tsadc
+ */
+static void rockchip_thermal_reset_controller(struct reset_control *reset)
+{
+	reset_control_assert(reset);
+	usleep_range(10, 20);
+	reset_control_deassert(reset);
+}
+
+static int rockchip_thermal_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct rockchip_thermal_data *thermal;
+	const struct of_device_id *match;
+	struct resource *res;
+	int irq;
+	int i;
+	int error;
+
+	match = of_match_node(of_rockchip_thermal_match, np);
+	if (!match)
+		return -ENXIO;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data),
+			       GFP_KERNEL);
+	if (!thermal)
+		return -ENOMEM;
+
+	thermal->pdev = pdev;
+
+	thermal->chip = (const struct rockchip_tsadc_chip *)match->data;
+	if (!thermal->chip)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	thermal->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(thermal->regs))
+		return PTR_ERR(thermal->regs);
+
+	thermal->reset = devm_reset_control_array_get(&pdev->dev, false, false);
+	if (IS_ERR(thermal->reset)) {
+		error = PTR_ERR(thermal->reset);
+		dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error);
+		return error;
+	}
+
+	thermal->clk = devm_clk_get(&pdev->dev, "tsadc");
+	if (IS_ERR(thermal->clk)) {
+		error = PTR_ERR(thermal->clk);
+		dev_err(&pdev->dev, "failed to get tsadc clock: %d\n", error);
+		return error;
+	}
+
+	thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
+	if (IS_ERR(thermal->pclk)) {
+		error = PTR_ERR(thermal->pclk);
+		dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n",
+			error);
+		return error;
+	}
+
+	error = clk_prepare_enable(thermal->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
+			error);
+		return error;
+	}
+
+	error = clk_prepare_enable(thermal->pclk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable pclk: %d\n", error);
+		goto err_disable_clk;
+	}
+
+	rockchip_thermal_reset_controller(thermal->reset);
+
+	error = rockchip_configure_from_dt(&pdev->dev, np, thermal);
+	if (error) {
+		dev_err(&pdev->dev, "failed to parse device tree data: %d\n",
+			error);
+		goto err_disable_pclk;
+	}
+
+	thermal->chip->initialize(thermal->grf, thermal->regs,
+				  thermal->tshut_polarity);
+
+	for (i = 0; i < thermal->chip->chn_num; i++) {
+		error = rockchip_thermal_register_sensor(pdev, thermal,
+						&thermal->sensors[i],
+						thermal->chip->chn_id[i]);
+		if (error) {
+			dev_err(&pdev->dev,
+				"failed to register sensor[%d] : error = %d\n",
+				i, error);
+			goto err_disable_pclk;
+		}
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					  &rockchip_thermal_alarm_irq_thread,
+					  IRQF_ONESHOT,
+					  "rockchip_thermal", thermal);
+	if (error) {
+		dev_err(&pdev->dev,
+			"failed to request tsadc irq: %d\n", error);
+		goto err_disable_pclk;
+	}
+
+	thermal->chip->control(thermal->regs, true);
+
+	for (i = 0; i < thermal->chip->chn_num; i++) {
+		rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
+		thermal->sensors[i].tzd->tzp->no_hwmon = false;
+		error = thermal_add_hwmon_sysfs(thermal->sensors[i].tzd);
+		if (error)
+			dev_warn(&pdev->dev,
+				 "failed to register sensor %d with hwmon: %d\n",
+				 i, error);
+	}
+
+	platform_set_drvdata(pdev, thermal);
+
+	return 0;
+
+err_disable_pclk:
+	clk_disable_unprepare(thermal->pclk);
+err_disable_clk:
+	clk_disable_unprepare(thermal->clk);
+
+	return error;
+}
+
+static int rockchip_thermal_remove(struct platform_device *pdev)
+{
+	struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < thermal->chip->chn_num; i++) {
+		struct rockchip_thermal_sensor *sensor = &thermal->sensors[i];
+
+		thermal_remove_hwmon_sysfs(sensor->tzd);
+		rockchip_thermal_toggle_sensor(sensor, false);
+	}
+
+	thermal->chip->control(thermal->regs, false);
+
+	clk_disable_unprepare(thermal->pclk);
+	clk_disable_unprepare(thermal->clk);
+
+	return 0;
+}
+
+static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
+{
+	struct rockchip_thermal_data *thermal = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < thermal->chip->chn_num; i++)
+		rockchip_thermal_toggle_sensor(&thermal->sensors[i], false);
+
+	thermal->chip->control(thermal->regs, false);
+
+	clk_disable(thermal->pclk);
+	clk_disable(thermal->clk);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int __maybe_unused rockchip_thermal_resume(struct device *dev)
+{
+	struct rockchip_thermal_data *thermal = dev_get_drvdata(dev);
+	int i;
+	int error;
+
+	error = clk_enable(thermal->clk);
+	if (error)
+		return error;
+
+	error = clk_enable(thermal->pclk);
+	if (error) {
+		clk_disable(thermal->clk);
+		return error;
+	}
+
+	rockchip_thermal_reset_controller(thermal->reset);
+
+	thermal->chip->initialize(thermal->grf, thermal->regs,
+				  thermal->tshut_polarity);
+
+	for (i = 0; i < thermal->chip->chn_num; i++) {
+		int id = thermal->sensors[i].id;
+
+		thermal->chip->set_tshut_mode(id, thermal->regs,
+					      thermal->tshut_mode);
+
+		error = thermal->chip->set_tshut_temp(&thermal->chip->table,
+					      id, thermal->regs,
+					      thermal->tshut_temp);
+		if (error)
+			dev_err(dev, "%s: invalid tshut=%d, error=%d\n",
+				__func__, thermal->tshut_temp, error);
+	}
+
+	thermal->chip->control(thermal->regs, true);
+
+	for (i = 0; i < thermal->chip->chn_num; i++)
+		rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
+
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops,
+			 rockchip_thermal_suspend, rockchip_thermal_resume);
+
+static struct platform_driver rockchip_thermal_driver = {
+	.driver = {
+		.name = "rockchip-thermal",
+		.pm = &rockchip_thermal_pm_ops,
+		.of_match_table = of_rockchip_thermal_match,
+	},
+	.probe = rockchip_thermal_probe,
+	.remove = rockchip_thermal_remove,
+};
+
+module_platform_driver(rockchip_thermal_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP THERMAL Driver");
+MODULE_AUTHOR("Rockchip, Inc.");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rockchip-thermal");
diff --git a/drivers/thermal/rzg2l_thermal.c b/drivers/thermal/rzg2l_thermal.c
new file mode 100644
index 000000000..2e0649f38
--- /dev/null
+++ b/drivers/thermal/rzg2l_thermal.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L TSU Thermal Sensor Driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "thermal_hwmon.h"
+
+#define CTEMP_MASK	0xFFF
+
+/* default calibration values, if FUSE values are missing */
+#define SW_CALIB0_VAL	3148
+#define SW_CALIB1_VAL	503
+
+/* Register offsets */
+#define TSU_SM		0x00
+#define TSU_ST		0x04
+#define TSU_SAD		0x0C
+#define TSU_SS		0x10
+
+#define OTPTSUTRIM_REG(n)	(0x18 + ((n) * 0x4))
+#define OTPTSUTRIM_EN_MASK	BIT(31)
+#define OTPTSUTRIM_MASK		GENMASK(11, 0)
+
+/* Sensor Mode Register(TSU_SM) */
+#define TSU_SM_EN_TS		BIT(0)
+#define TSU_SM_ADC_EN_TS	BIT(1)
+#define TSU_SM_NORMAL_MODE	(TSU_SM_EN_TS | TSU_SM_ADC_EN_TS)
+
+/* TSU_ST bits */
+#define TSU_ST_START		BIT(0)
+
+#define TSU_SS_CONV_RUNNING	BIT(0)
+
+#define TS_CODE_AVE_SCALE(x)	((x) * 1000000)
+#define MCELSIUS(temp)		((temp) * MILLIDEGREE_PER_DEGREE)
+#define TS_CODE_CAP_TIMES	8	/* Total number of ADC data samples */
+
+#define RZG2L_THERMAL_GRAN	500	/* milli Celsius */
+#define RZG2L_TSU_SS_TIMEOUT_US	1000
+
+#define CURVATURE_CORRECTION_CONST	13
+
+struct rzg2l_thermal_priv {
+	struct device *dev;
+	void __iomem *base;
+	struct thermal_zone_device *zone;
+	struct reset_control *rstc;
+	u32 calib0, calib1;
+};
+
+static inline u32 rzg2l_thermal_read(struct rzg2l_thermal_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
+static inline void rzg2l_thermal_write(struct rzg2l_thermal_priv *priv, u32 reg,
+				       u32 data)
+{
+	iowrite32(data, priv->base + reg);
+}
+
+static int rzg2l_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct rzg2l_thermal_priv *priv = tz->devdata;
+	u32 result = 0, dsensor, ts_code_ave;
+	int val, i;
+
+	for (i = 0; i < TS_CODE_CAP_TIMES ; i++) {
+		/*
+		 * TSU repeats measurement at 20 microseconds intervals and
+		 * automatically updates the results of measurement. As per
+		 * the HW manual for measuring temperature we need to read 8
+		 * values consecutively and then take the average.
+		 * ts_code_ave = (ts_code[0] + ⋯ + ts_code[7]) / 8
+		 */
+		result += rzg2l_thermal_read(priv, TSU_SAD) & CTEMP_MASK;
+		usleep_range(20, 30);
+	}
+
+	ts_code_ave = result / TS_CODE_CAP_TIMES;
+
+	/*
+	 * Calculate actual sensor value by applying curvature correction formula
+	 * dsensor = ts_code_ave / (1 + ts_code_ave * 0.000013). Here we are doing
+	 * integer calculation by scaling all the values by 1000000.
+	 */
+	dsensor = TS_CODE_AVE_SCALE(ts_code_ave) /
+		(TS_CODE_AVE_SCALE(1) + (ts_code_ave * CURVATURE_CORRECTION_CONST));
+
+	/*
+	 * The temperature Tj is calculated by the formula
+	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
+	 * where calib0 and calib1 are the calibration values.
+	 */
+	val = ((dsensor - priv->calib1) * (MCELSIUS(165) /
+		(priv->calib0 - priv->calib1))) - MCELSIUS(40);
+
+	*temp = roundup(val, RZG2L_THERMAL_GRAN);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops rzg2l_tz_of_ops = {
+	.get_temp = rzg2l_thermal_get_temp,
+};
+
+static int rzg2l_thermal_init(struct rzg2l_thermal_priv *priv)
+{
+	u32 reg_val;
+
+	rzg2l_thermal_write(priv, TSU_SM, TSU_SM_NORMAL_MODE);
+	rzg2l_thermal_write(priv, TSU_ST, 0);
+
+	/*
+	 * Before setting the START bit, TSU should be in normal operating
+	 * mode. As per the HW manual, it will take 60 µs to place the TSU
+	 * into normal operating mode.
+	 */
+	usleep_range(60, 80);
+
+	reg_val = rzg2l_thermal_read(priv, TSU_ST);
+	reg_val |= TSU_ST_START;
+	rzg2l_thermal_write(priv, TSU_ST, reg_val);
+
+	return readl_poll_timeout(priv->base + TSU_SS, reg_val,
+				  reg_val == TSU_SS_CONV_RUNNING, 50,
+				  RZG2L_TSU_SS_TIMEOUT_US);
+}
+
+static void rzg2l_thermal_reset_assert_pm_disable_put(struct platform_device *pdev)
+{
+	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	reset_control_assert(priv->rstc);
+}
+
+static int rzg2l_thermal_remove(struct platform_device *pdev)
+{
+	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	thermal_remove_hwmon_sysfs(priv->zone);
+	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+
+	return 0;
+}
+
+static int rzg2l_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *zone;
+	struct rzg2l_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->dev = dev;
+	priv->rstc = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(dev, PTR_ERR(priv->rstc),
+				     "failed to get cpg reset");
+
+	ret = reset_control_deassert(priv->rstc);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to deassert");
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	priv->calib0 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0));
+	if (priv->calib0 & OTPTSUTRIM_EN_MASK)
+		priv->calib0 &= OTPTSUTRIM_MASK;
+	else
+		priv->calib0 = SW_CALIB0_VAL;
+
+	priv->calib1 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(1));
+	if (priv->calib1 & OTPTSUTRIM_EN_MASK)
+		priv->calib1 &= OTPTSUTRIM_MASK;
+	else
+		priv->calib1 = SW_CALIB1_VAL;
+
+	platform_set_drvdata(pdev, priv);
+	ret = rzg2l_thermal_init(priv);
+	if (ret) {
+		dev_err(dev, "Failed to start TSU");
+		goto err;
+	}
+
+	zone = devm_thermal_of_zone_register(dev, 0, priv,
+					     &rzg2l_tz_of_ops);
+	if (IS_ERR(zone)) {
+		dev_err(dev, "Can't register thermal zone");
+		ret = PTR_ERR(zone);
+		goto err;
+	}
+
+	priv->zone = zone;
+	priv->zone->tzp->no_hwmon = false;
+	ret = thermal_add_hwmon_sysfs(priv->zone);
+	if (ret)
+		goto err;
+
+	dev_dbg(dev, "TSU probed with %s calibration values",
+		rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0)) ?  "hw" : "sw");
+
+	return 0;
+
+err:
+	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+	return ret;
+}
+
+static const struct of_device_id rzg2l_thermal_dt_ids[] = {
+	{ .compatible = "renesas,rzg2l-tsu", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_thermal_dt_ids);
+
+static struct platform_driver rzg2l_thermal_driver = {
+	.driver = {
+		.name = "rzg2l_thermal",
+		.of_match_table = rzg2l_thermal_dt_ids,
+	},
+	.probe = rzg2l_thermal_probe,
+	.remove = rzg2l_thermal_remove,
+};
+module_platform_driver(rzg2l_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L TSU Thermal Sensor Driver");
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
new file mode 100644
index 000000000..f4eff5a41
--- /dev/null
+++ b/drivers/thermal/samsung/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config EXYNOS_THERMAL
+	tristate "Exynos thermal management unit driver"
+	depends on THERMAL_OF
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the TMU (Thermal Management
+	  Unit) driver for Samsung Exynos series of SoCs. This driver initialises
+	  the TMU, reports temperature and handles cooling action if defined.
+	  This driver uses the Exynos core thermal APIs and TMU configuration
+	  data from the supported SoCs.
diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
new file mode 100644
index 000000000..f13940715
--- /dev/null
+++ b/drivers/thermal/samsung/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Samsung thermal specific Makefile
+#
+obj-$(CONFIG_EXYNOS_THERMAL)			+= exynos_thermal.o
+exynos_thermal-y				:= exynos_tmu.o
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
new file mode 100644
index 000000000..51874d0a2
--- /dev/null
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -0,0 +1,1191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * exynos_tmu.c - Samsung Exynos TMU (Thermal Management Unit)
+ *
+ *  Copyright (C) 2014 Samsung Electronics
+ *  Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Donggeun Kim <dg77.kim@samsung.com>
+ *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#include "../thermal_core.h"
+
+/* Exynos generic registers */
+#define EXYNOS_TMU_REG_TRIMINFO		0x0
+#define EXYNOS_TMU_REG_CONTROL		0x20
+#define EXYNOS_TMU_REG_STATUS		0x28
+#define EXYNOS_TMU_REG_CURRENT_TEMP	0x40
+#define EXYNOS_TMU_REG_INTEN		0x70
+#define EXYNOS_TMU_REG_INTSTAT		0x74
+#define EXYNOS_TMU_REG_INTCLEAR		0x78
+
+#define EXYNOS_TMU_TEMP_MASK		0xff
+#define EXYNOS_TMU_REF_VOLTAGE_SHIFT	24
+#define EXYNOS_TMU_REF_VOLTAGE_MASK	0x1f
+#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK	0xf
+#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT	8
+#define EXYNOS_TMU_CORE_EN_SHIFT	0
+
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1	0x10
+
+/* Exynos4210 specific registers */
+#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP	0x44
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL0	0x50
+
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2	0x14
+#define EXYNOS_THD_TEMP_RISE		0x50
+#define EXYNOS_THD_TEMP_FALL		0x54
+#define EXYNOS_EMUL_CON		0x80
+
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE	1
+#define EXYNOS_TRIMINFO_25_SHIFT	0
+#define EXYNOS_TRIMINFO_85_SHIFT	8
+#define EXYNOS_TMU_TRIP_MODE_SHIFT	13
+#define EXYNOS_TMU_TRIP_MODE_MASK	0x7
+#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT	12
+
+#define EXYNOS_TMU_INTEN_RISE0_SHIFT	0
+#define EXYNOS_TMU_INTEN_FALL0_SHIFT	16
+
+#define EXYNOS_EMUL_TIME	0x57F0
+#define EXYNOS_EMUL_TIME_MASK	0xffff
+#define EXYNOS_EMUL_TIME_SHIFT	16
+#define EXYNOS_EMUL_DATA_SHIFT	8
+#define EXYNOS_EMUL_DATA_MASK	0xFF
+#define EXYNOS_EMUL_ENABLE	0x1
+
+/* Exynos5260 specific */
+#define EXYNOS5260_TMU_REG_INTEN		0xC0
+#define EXYNOS5260_TMU_REG_INTSTAT		0xC4
+#define EXYNOS5260_TMU_REG_INTCLEAR		0xC8
+#define EXYNOS5260_EMUL_CON			0x100
+
+/* Exynos4412 specific */
+#define EXYNOS4412_MUX_ADDR_VALUE          6
+#define EXYNOS4412_MUX_ADDR_SHIFT          20
+
+/* Exynos5433 specific registers */
+#define EXYNOS5433_THD_TEMP_RISE3_0		0x050
+#define EXYNOS5433_THD_TEMP_RISE7_4		0x054
+#define EXYNOS5433_THD_TEMP_FALL3_0		0x060
+#define EXYNOS5433_THD_TEMP_FALL7_4		0x064
+#define EXYNOS5433_TMU_REG_INTEN		0x0c0
+#define EXYNOS5433_TMU_REG_INTPEND		0x0c8
+#define EXYNOS5433_TMU_EMUL_CON			0x110
+#define EXYNOS5433_TMU_PD_DET_EN		0x130
+
+#define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT	16
+#define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT	23
+#define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK	\
+			(0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
+#define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK	BIT(23)
+
+#define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING	0
+#define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING	1
+
+#define EXYNOS5433_PD_DET_EN			1
+
+#define EXYNOS5433_G3D_BASE			0x10070000
+
+/* Exynos7 specific registers */
+#define EXYNOS7_THD_TEMP_RISE7_6		0x50
+#define EXYNOS7_THD_TEMP_FALL7_6		0x60
+#define EXYNOS7_TMU_REG_INTEN			0x110
+#define EXYNOS7_TMU_REG_INTPEND			0x118
+#define EXYNOS7_TMU_REG_EMUL_CON		0x160
+
+#define EXYNOS7_TMU_TEMP_MASK			0x1ff
+#define EXYNOS7_PD_DET_EN_SHIFT			23
+#define EXYNOS7_TMU_INTEN_RISE0_SHIFT		0
+#define EXYNOS7_EMUL_DATA_SHIFT			7
+#define EXYNOS7_EMUL_DATA_MASK			0x1ff
+
+#define EXYNOS_FIRST_POINT_TRIM			25
+#define EXYNOS_SECOND_POINT_TRIM		85
+
+#define EXYNOS_NOISE_CANCEL_MODE		4
+
+#define MCELSIUS	1000
+
+enum soc_type {
+	SOC_ARCH_EXYNOS3250 = 1,
+	SOC_ARCH_EXYNOS4210,
+	SOC_ARCH_EXYNOS4412,
+	SOC_ARCH_EXYNOS5250,
+	SOC_ARCH_EXYNOS5260,
+	SOC_ARCH_EXYNOS5420,
+	SOC_ARCH_EXYNOS5420_TRIMINFO,
+	SOC_ARCH_EXYNOS5433,
+	SOC_ARCH_EXYNOS7,
+};
+
+/**
+ * struct exynos_tmu_data : A structure to hold the private data of the TMU
+ *			    driver
+ * @id: identifier of the one instance of the TMU controller.
+ * @base: base address of the single instance of the TMU controller.
+ * @base_second: base address of the common registers of the TMU controller.
+ * @irq: irq number of the TMU controller.
+ * @soc: id of the SOC type.
+ * @irq_work: pointer to the irq work structure.
+ * @lock: lock to implement synchronization.
+ * @clk: pointer to the clock structure.
+ * @clk_sec: pointer to the clock structure for accessing the base_second.
+ * @sclk: pointer to the clock structure for accessing the tmu special clk.
+ * @cal_type: calibration type for temperature
+ * @efuse_value: SoC defined fuse value
+ * @min_efuse_value: minimum valid trimming data
+ * @max_efuse_value: maximum valid trimming data
+ * @temp_error1: fused value of the first point trim.
+ * @temp_error2: fused value of the second point trim.
+ * @gain: gain of amplifier in the positive-TC generator block
+ *	0 < gain <= 15
+ * @reference_voltage: reference voltage of amplifier
+ *	in the positive-TC generator block
+ *	0 < reference_voltage <= 31
+ * @regulator: pointer to the TMU regulator structure.
+ * @reg_conf: pointer to structure to register with core thermal.
+ * @tzd: pointer to thermal_zone_device structure
+ * @ntrip: number of supported trip points.
+ * @enabled: current status of TMU device
+ * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
+ * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
+ * @tmu_initialize: SoC specific TMU initialization method
+ * @tmu_control: SoC specific TMU control method
+ * @tmu_read: SoC specific TMU temperature read method
+ * @tmu_set_emulation: SoC specific TMU emulation setting method
+ * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
+ */
+struct exynos_tmu_data {
+	int id;
+	void __iomem *base;
+	void __iomem *base_second;
+	int irq;
+	enum soc_type soc;
+	struct work_struct irq_work;
+	struct mutex lock;
+	struct clk *clk, *clk_sec, *sclk;
+	u32 cal_type;
+	u32 efuse_value;
+	u32 min_efuse_value;
+	u32 max_efuse_value;
+	u16 temp_error1, temp_error2;
+	u8 gain;
+	u8 reference_voltage;
+	struct regulator *regulator;
+	struct thermal_zone_device *tzd;
+	unsigned int ntrip;
+	bool enabled;
+
+	void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip,
+				 u8 temp);
+	void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip,
+				 u8 temp, u8 hyst);
+	void (*tmu_initialize)(struct platform_device *pdev);
+	void (*tmu_control)(struct platform_device *pdev, bool on);
+	int (*tmu_read)(struct exynos_tmu_data *data);
+	void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
+	void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
+};
+
+/*
+ * TMU treats temperature as a mapped temperature code.
+ * The temperature is converted differently depending on the calibration type.
+ */
+static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
+{
+	if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+		return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM;
+
+	return (temp - EXYNOS_FIRST_POINT_TRIM) *
+		(data->temp_error2 - data->temp_error1) /
+		(EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) +
+		data->temp_error1;
+}
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree Celsius.
+ */
+static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
+{
+	if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+		return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM;
+
+	return (temp_code - data->temp_error1) *
+		(EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) /
+		(data->temp_error2 - data->temp_error1) +
+		EXYNOS_FIRST_POINT_TRIM;
+}
+
+static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
+{
+	u16 tmu_temp_mask =
+		(data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK
+						: EXYNOS_TMU_TEMP_MASK;
+
+	data->temp_error1 = trim_info & tmu_temp_mask;
+	data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
+				EXYNOS_TMU_TEMP_MASK);
+
+	if (!data->temp_error1 ||
+	    (data->min_efuse_value > data->temp_error1) ||
+	    (data->temp_error1 > data->max_efuse_value))
+		data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
+
+	if (!data->temp_error2)
+		data->temp_error2 =
+			(data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
+			EXYNOS_TMU_TEMP_MASK;
+}
+
+static int exynos_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tzd = data->tzd;
+	const struct thermal_trip * const trips =
+		of_thermal_get_trip_points(tzd);
+	unsigned int status;
+	int ret = 0, temp, hyst;
+
+	if (!trips) {
+		dev_err(&pdev->dev,
+			"Cannot get trip points from device tree!\n");
+		return -ENODEV;
+	}
+
+	if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
+		ret = tzd->ops->get_crit_temp(tzd, &temp);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"No CRITICAL trip point defined in device tree!\n");
+		goto out;
+	}
+
+	if (of_thermal_get_ntrips(tzd) > data->ntrip) {
+		dev_info(&pdev->dev,
+			 "More trip points than supported by this TMU.\n");
+		dev_info(&pdev->dev,
+			 "%d trip points should be configured in polling mode.\n",
+			 (of_thermal_get_ntrips(tzd) - data->ntrip));
+	}
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_enable(data->clk_sec);
+
+	status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+	if (!status) {
+		ret = -EBUSY;
+	} else {
+		int i, ntrips =
+			min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
+
+		data->tmu_initialize(pdev);
+
+		/* Write temperature code for rising and falling threshold */
+		for (i = 0; i < ntrips; i++) {
+			/* Write temperature code for rising threshold */
+			ret = tzd->ops->get_trip_temp(tzd, i, &temp);
+			if (ret)
+				goto err;
+			temp /= MCELSIUS;
+			data->tmu_set_trip_temp(data, i, temp);
+
+			/* Write temperature code for falling threshold */
+			ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+			if (ret)
+				goto err;
+			hyst /= MCELSIUS;
+			data->tmu_set_trip_hyst(data, i, temp, hyst);
+		}
+
+		data->tmu_clear_irqs(data);
+	}
+err:
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+	if (!IS_ERR(data->clk_sec))
+		clk_disable(data->clk_sec);
+out:
+	return ret;
+}
+
+static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
+{
+	if (data->soc == SOC_ARCH_EXYNOS4412 ||
+	    data->soc == SOC_ARCH_EXYNOS3250)
+		con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
+
+	con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+	con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
+
+	con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+	con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+
+	con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
+	con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT);
+
+	return con;
+}
+
+static void exynos_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+	data->tmu_control(pdev, on);
+	data->enabled = on;
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+}
+
+static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
+					 int trip, u8 temp)
+{
+	const struct thermal_trip * const trips =
+		of_thermal_get_trip_points(data->tzd);
+	u8 ref, th_code;
+
+	ref = trips[0].temperature / MCELSIUS;
+
+	if (trip == 0) {
+		th_code = temp_to_code(data, ref);
+		writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+	}
+
+	temp -= ref;
+	writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+}
+
+/* failing thresholds are not supported on Exynos4210 */
+static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+					 int trip, u8 temp, u8 hyst)
+{
+}
+
+static void exynos4210_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+	sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
+}
+
+static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
+					 int trip, u8 temp)
+{
+	u32 th, con;
+
+	th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+	th &= ~(0xff << 8 * trip);
+	th |= temp_to_code(data, temp) << 8 * trip;
+	writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+	if (trip == 3) {
+		con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+		con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+		writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+	}
+}
+
+static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+					 int trip, u8 temp, u8 hyst)
+{
+	u32 th;
+
+	th = readl(data->base + EXYNOS_THD_TEMP_FALL);
+	th &= ~(0xff << 8 * trip);
+	if (hyst)
+		th |= temp_to_code(data, temp - hyst) << 8 * trip;
+	writel(th, data->base + EXYNOS_THD_TEMP_FALL);
+}
+
+static void exynos4412_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	unsigned int trim_info, ctrl;
+
+	if (data->soc == SOC_ARCH_EXYNOS3250 ||
+	    data->soc == SOC_ARCH_EXYNOS4412 ||
+	    data->soc == SOC_ARCH_EXYNOS5250) {
+		if (data->soc == SOC_ARCH_EXYNOS3250) {
+			ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
+			ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+			writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
+		}
+		ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
+		ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+		writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
+	}
+
+	/* On exynos5420 the triminfo register is in the shared space */
+	if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
+		trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
+	else
+		trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+
+	sanitize_temp_error(data, trim_info);
+}
+
+static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
+					 int trip, u8 temp)
+{
+	unsigned int reg_off, j;
+	u32 th;
+
+	if (trip > 3) {
+		reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
+		j = trip - 4;
+	} else {
+		reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
+		j = trip;
+	}
+
+	th = readl(data->base + reg_off);
+	th &= ~(0xff << j * 8);
+	th |= (temp_to_code(data, temp) << j * 8);
+	writel(th, data->base + reg_off);
+}
+
+static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+					 int trip, u8 temp, u8 hyst)
+{
+	unsigned int reg_off, j;
+	u32 th;
+
+	if (trip > 3) {
+		reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
+		j = trip - 4;
+	} else {
+		reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
+		j = trip;
+	}
+
+	th = readl(data->base + reg_off);
+	th &= ~(0xff << j * 8);
+	th |= (temp_to_code(data, temp - hyst) << j * 8);
+	writel(th, data->base + reg_off);
+}
+
+static void exynos5433_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	unsigned int trim_info;
+	int sensor_id, cal_type;
+
+	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+	sanitize_temp_error(data, trim_info);
+
+	/* Read the temperature sensor id */
+	sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
+				>> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
+	dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
+
+	/* Read the calibration mode */
+	writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
+	cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
+				>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
+
+	switch (cal_type) {
+	case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
+		data->cal_type = TYPE_TWO_POINT_TRIMMING;
+		break;
+	case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
+	default:
+		data->cal_type = TYPE_ONE_POINT_TRIMMING;
+		break;
+	}
+
+	dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
+			cal_type ?  2 : 1);
+}
+
+static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
+				      int trip, u8 temp)
+{
+	unsigned int reg_off, bit_off;
+	u32 th;
+
+	reg_off = ((7 - trip) / 2) * 4;
+	bit_off = ((8 - trip) % 2);
+
+	th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+	th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+	th |= temp_to_code(data, temp) << (16 * bit_off);
+	writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+}
+
+static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+				      int trip, u8 temp, u8 hyst)
+{
+	unsigned int reg_off, bit_off;
+	u32 th;
+
+	reg_off = ((7 - trip) / 2) * 4;
+	bit_off = ((8 - trip) % 2);
+
+	th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+	th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+	th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
+	writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+}
+
+static void exynos7_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	unsigned int trim_info;
+
+	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+	sanitize_temp_error(data, trim_info);
+}
+
+static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tz = data->tzd;
+	unsigned int con, interrupt_en = 0, i;
+
+	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+	if (on) {
+		for (i = 0; i < data->ntrip; i++) {
+			if (!of_thermal_is_trip_valid(tz, i))
+				continue;
+
+			interrupt_en |=
+				(1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4));
+		}
+
+		if (data->soc != SOC_ARCH_EXYNOS4210)
+			interrupt_en |=
+				interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+	} else {
+		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+	}
+
+	writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
+	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tz = data->tzd;
+	unsigned int con, interrupt_en = 0, pd_det_en, i;
+
+	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+	if (on) {
+		for (i = 0; i < data->ntrip; i++) {
+			if (!of_thermal_is_trip_valid(tz, i))
+				continue;
+
+			interrupt_en |=
+				(1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+		}
+
+		interrupt_en |=
+			interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+	} else
+		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+
+	pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
+
+	writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
+	writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
+	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static void exynos7_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tz = data->tzd;
+	unsigned int con, interrupt_en = 0, i;
+
+	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+	if (on) {
+		for (i = 0; i < data->ntrip; i++) {
+			if (!of_thermal_is_trip_valid(tz, i))
+				continue;
+
+			interrupt_en |=
+				(1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+		}
+
+		interrupt_en |=
+			interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+		con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
+	} else {
+		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+		con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
+	}
+
+	writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
+	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct exynos_tmu_data *data = tz->devdata;
+	int value, ret = 0;
+
+	if (!data || !data->tmu_read)
+		return -EINVAL;
+	else if (!data->enabled)
+		/*
+		 * Called too early, probably
+		 * from thermal_zone_of_sensor_register().
+		 */
+		return -EAGAIN;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	value = data->tmu_read(data);
+	if (value < 0)
+		ret = value;
+	else
+		*temp = code_to_temp(data, value) * MCELSIUS;
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+#ifdef CONFIG_THERMAL_EMULATION
+static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
+			    int temp)
+{
+	if (temp) {
+		temp /= MCELSIUS;
+
+		val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
+		val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
+		if (data->soc == SOC_ARCH_EXYNOS7) {
+			val &= ~(EXYNOS7_EMUL_DATA_MASK <<
+				EXYNOS7_EMUL_DATA_SHIFT);
+			val |= (temp_to_code(data, temp) <<
+				EXYNOS7_EMUL_DATA_SHIFT) |
+				EXYNOS_EMUL_ENABLE;
+		} else {
+			val &= ~(EXYNOS_EMUL_DATA_MASK <<
+				EXYNOS_EMUL_DATA_SHIFT);
+			val |= (temp_to_code(data, temp) <<
+				EXYNOS_EMUL_DATA_SHIFT) |
+				EXYNOS_EMUL_ENABLE;
+		}
+	} else {
+		val &= ~EXYNOS_EMUL_ENABLE;
+	}
+
+	return val;
+}
+
+static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
+					 int temp)
+{
+	unsigned int val;
+	u32 emul_con;
+
+	if (data->soc == SOC_ARCH_EXYNOS5260)
+		emul_con = EXYNOS5260_EMUL_CON;
+	else if (data->soc == SOC_ARCH_EXYNOS5433)
+		emul_con = EXYNOS5433_TMU_EMUL_CON;
+	else if (data->soc == SOC_ARCH_EXYNOS7)
+		emul_con = EXYNOS7_TMU_REG_EMUL_CON;
+	else
+		emul_con = EXYNOS_EMUL_CON;
+
+	val = readl(data->base + emul_con);
+	val = get_emul_con_reg(data, val, temp);
+	writel(val, data->base + emul_con);
+}
+
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
+{
+	struct exynos_tmu_data *data = tz->devdata;
+	int ret = -EINVAL;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		goto out;
+
+	if (temp && temp < MCELSIUS)
+		goto out;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+	data->tmu_set_emulation(data, temp);
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+	return 0;
+out:
+	return ret;
+}
+#else
+#define exynos4412_tmu_set_emulation NULL
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
+	{ return -EINVAL; }
+#endif /* CONFIG_THERMAL_EMULATION */
+
+static int exynos4210_tmu_read(struct exynos_tmu_data *data)
+{
+	int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+
+	/* "temp_code" should range between 75 and 175 */
+	return (ret < 75 || ret > 175) ? -ENODATA : ret;
+}
+
+static int exynos4412_tmu_read(struct exynos_tmu_data *data)
+{
+	return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+}
+
+static int exynos7_tmu_read(struct exynos_tmu_data *data)
+{
+	return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
+		EXYNOS7_TMU_TEMP_MASK;
+}
+
+static void exynos_tmu_work(struct work_struct *work)
+{
+	struct exynos_tmu_data *data = container_of(work,
+			struct exynos_tmu_data, irq_work);
+
+	thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	/* TODO: take action based on particular interrupt */
+	data->tmu_clear_irqs(data);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+	enable_irq(data->irq);
+}
+
+static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+	unsigned int val_irq;
+	u32 tmu_intstat, tmu_intclear;
+
+	if (data->soc == SOC_ARCH_EXYNOS5260) {
+		tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
+		tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
+	} else if (data->soc == SOC_ARCH_EXYNOS7) {
+		tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
+		tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
+	} else if (data->soc == SOC_ARCH_EXYNOS5433) {
+		tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
+		tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
+	} else {
+		tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
+		tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
+	}
+
+	val_irq = readl(data->base + tmu_intstat);
+	/*
+	 * Clear the interrupts.  Please note that the documentation for
+	 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+	 * states that INTCLEAR register has a different placing of bits
+	 * responsible for FALL IRQs than INTSTAT register.  Exynos5420
+	 * and Exynos5440 documentation is correct (Exynos4210 doesn't
+	 * support FALL IRQs at all).
+	 */
+	writel(val_irq, data->base + tmu_intclear);
+}
+
+static irqreturn_t exynos_tmu_irq(int irq, void *id)
+{
+	struct exynos_tmu_data *data = id;
+
+	disable_irq_nosync(irq);
+	schedule_work(&data->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id exynos_tmu_match[] = {
+	{
+		.compatible = "samsung,exynos3250-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS3250,
+	}, {
+		.compatible = "samsung,exynos4210-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS4210,
+	}, {
+		.compatible = "samsung,exynos4412-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS4412,
+	}, {
+		.compatible = "samsung,exynos5250-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS5250,
+	}, {
+		.compatible = "samsung,exynos5260-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS5260,
+	}, {
+		.compatible = "samsung,exynos5420-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS5420,
+	}, {
+		.compatible = "samsung,exynos5420-tmu-ext-triminfo",
+		.data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO,
+	}, {
+		.compatible = "samsung,exynos5433-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS5433,
+	}, {
+		.compatible = "samsung,exynos7-tmu",
+		.data = (const void *)SOC_ARCH_EXYNOS7,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_tmu_match);
+
+static int exynos_map_dt_data(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct resource res;
+
+	if (!data || !pdev->dev.of_node)
+		return -ENODEV;
+
+	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
+	if (data->id < 0)
+		data->id = 0;
+
+	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (data->irq <= 0) {
+		dev_err(&pdev->dev, "failed to get IRQ\n");
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
+		dev_err(&pdev->dev, "failed to get Resource 0\n");
+		return -ENODEV;
+	}
+
+	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
+	if (!data->base) {
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev);
+
+	switch (data->soc) {
+	case SOC_ARCH_EXYNOS4210:
+		data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp;
+		data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst;
+		data->tmu_initialize = exynos4210_tmu_initialize;
+		data->tmu_control = exynos4210_tmu_control;
+		data->tmu_read = exynos4210_tmu_read;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 4;
+		data->gain = 15;
+		data->reference_voltage = 7;
+		data->efuse_value = 55;
+		data->min_efuse_value = 40;
+		data->max_efuse_value = 100;
+		break;
+	case SOC_ARCH_EXYNOS3250:
+	case SOC_ARCH_EXYNOS4412:
+	case SOC_ARCH_EXYNOS5250:
+	case SOC_ARCH_EXYNOS5260:
+	case SOC_ARCH_EXYNOS5420:
+	case SOC_ARCH_EXYNOS5420_TRIMINFO:
+		data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp;
+		data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst;
+		data->tmu_initialize = exynos4412_tmu_initialize;
+		data->tmu_control = exynos4210_tmu_control;
+		data->tmu_read = exynos4412_tmu_read;
+		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 4;
+		data->gain = 8;
+		data->reference_voltage = 16;
+		data->efuse_value = 55;
+		if (data->soc != SOC_ARCH_EXYNOS5420 &&
+		    data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+			data->min_efuse_value = 40;
+		else
+			data->min_efuse_value = 0;
+		data->max_efuse_value = 100;
+		break;
+	case SOC_ARCH_EXYNOS5433:
+		data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
+		data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst;
+		data->tmu_initialize = exynos5433_tmu_initialize;
+		data->tmu_control = exynos5433_tmu_control;
+		data->tmu_read = exynos4412_tmu_read;
+		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 8;
+		data->gain = 8;
+		if (res.start == EXYNOS5433_G3D_BASE)
+			data->reference_voltage = 23;
+		else
+			data->reference_voltage = 16;
+		data->efuse_value = 75;
+		data->min_efuse_value = 40;
+		data->max_efuse_value = 150;
+		break;
+	case SOC_ARCH_EXYNOS7:
+		data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp;
+		data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst;
+		data->tmu_initialize = exynos7_tmu_initialize;
+		data->tmu_control = exynos7_tmu_control;
+		data->tmu_read = exynos7_tmu_read;
+		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 8;
+		data->gain = 9;
+		data->reference_voltage = 17;
+		data->efuse_value = 75;
+		data->min_efuse_value = 15;
+		data->max_efuse_value = 100;
+		break;
+	default:
+		dev_err(&pdev->dev, "Platform not supported\n");
+		return -EINVAL;
+	}
+
+	data->cal_type = TYPE_ONE_POINT_TRIMMING;
+
+	/*
+	 * Check if the TMU shares some registers and then try to map the
+	 * memory of common registers.
+	 */
+	if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+		return 0;
+
+	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
+		dev_err(&pdev->dev, "failed to get Resource 1\n");
+		return -ENODEV;
+	}
+
+	data->base_second = devm_ioremap(&pdev->dev, res.start,
+					resource_size(&res));
+	if (!data->base_second) {
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops exynos_sensor_ops = {
+	.get_temp = exynos_get_temp,
+	.set_emul_temp = exynos_tmu_set_emulation,
+};
+
+static int exynos_tmu_probe(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
+					GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->lock);
+
+	/*
+	 * Try enabling the regulator if found
+	 * TODO: Add regulator as an SOC feature, so that regulator enable
+	 * is a compulsory call.
+	 */
+	data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu");
+	if (!IS_ERR(data->regulator)) {
+		ret = regulator_enable(data->regulator);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to enable vtmu\n");
+			return ret;
+		}
+	} else {
+		if (PTR_ERR(data->regulator) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
+	}
+
+	ret = exynos_map_dt_data(pdev);
+	if (ret)
+		goto err_sensor;
+
+	INIT_WORK(&data->irq_work, exynos_tmu_work);
+
+	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		ret = PTR_ERR(data->clk);
+		goto err_sensor;
+	}
+
+	data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
+	if (IS_ERR(data->clk_sec)) {
+		if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
+			dev_err(&pdev->dev, "Failed to get triminfo clock\n");
+			ret = PTR_ERR(data->clk_sec);
+			goto err_sensor;
+		}
+	} else {
+		ret = clk_prepare(data->clk_sec);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to get clock\n");
+			goto err_sensor;
+		}
+	}
+
+	ret = clk_prepare(data->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		goto err_clk_sec;
+	}
+
+	switch (data->soc) {
+	case SOC_ARCH_EXYNOS5433:
+	case SOC_ARCH_EXYNOS7:
+		data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
+		if (IS_ERR(data->sclk)) {
+			dev_err(&pdev->dev, "Failed to get sclk\n");
+			ret = PTR_ERR(data->sclk);
+			goto err_clk;
+		} else {
+			ret = clk_prepare_enable(data->sclk);
+			if (ret) {
+				dev_err(&pdev->dev, "Failed to enable sclk\n");
+				goto err_clk;
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * data->tzd must be registered before calling exynos_tmu_initialize(),
+	 * requesting irq and calling exynos_tmu_control().
+	 */
+	data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+						  &exynos_sensor_ops);
+	if (IS_ERR(data->tzd)) {
+		ret = PTR_ERR(data->tzd);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to register sensor: %d\n",
+				ret);
+		goto err_sclk;
+	}
+
+	ret = exynos_tmu_initialize(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize TMU\n");
+		goto err_sclk;
+	}
+
+	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
+		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
+		goto err_sclk;
+	}
+
+	exynos_tmu_control(pdev, true);
+	return 0;
+
+err_sclk:
+	clk_disable_unprepare(data->sclk);
+err_clk:
+	clk_unprepare(data->clk);
+err_clk_sec:
+	if (!IS_ERR(data->clk_sec))
+		clk_unprepare(data->clk_sec);
+err_sensor:
+	if (!IS_ERR(data->regulator))
+		regulator_disable(data->regulator);
+
+	return ret;
+}
+
+static int exynos_tmu_remove(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+	exynos_tmu_control(pdev, false);
+
+	clk_disable_unprepare(data->sclk);
+	clk_unprepare(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_unprepare(data->clk_sec);
+
+	if (!IS_ERR(data->regulator))
+		regulator_disable(data->regulator);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_tmu_suspend(struct device *dev)
+{
+	exynos_tmu_control(to_platform_device(dev), false);
+
+	return 0;
+}
+
+static int exynos_tmu_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	exynos_tmu_initialize(pdev);
+	exynos_tmu_control(pdev, true);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
+			 exynos_tmu_suspend, exynos_tmu_resume);
+#define EXYNOS_TMU_PM	(&exynos_tmu_pm)
+#else
+#define EXYNOS_TMU_PM	NULL
+#endif
+
+static struct platform_driver exynos_tmu_driver = {
+	.driver = {
+		.name   = "exynos-tmu",
+		.pm     = EXYNOS_TMU_PM,
+		.of_match_table = exynos_tmu_match,
+	},
+	.probe = exynos_tmu_probe,
+	.remove	= exynos_tmu_remove,
+};
+
+module_platform_driver(exynos_tmu_driver);
+
+MODULE_DESCRIPTION("Exynos TMU Driver");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos-tmu");
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
new file mode 100644
index 000000000..ee33ed692
--- /dev/null
+++ b/drivers/thermal/spear_thermal.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPEAr thermal driver.
+ *
+ * Copyright (C) 2011-2012 ST Microelectronics
+ * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define MD_FACTOR	1000
+
+/* SPEAr Thermal Sensor Dev Structure */
+struct spear_thermal_dev {
+	/* pointer to base address of the thermal sensor */
+	void __iomem *thermal_base;
+	/* clk structure */
+	struct clk *clk;
+	/* pointer to thermal flags */
+	unsigned int flags;
+};
+
+static inline int thermal_get_temp(struct thermal_zone_device *thermal,
+				int *temp)
+{
+	struct spear_thermal_dev *stdev = thermal->devdata;
+
+	/*
+	 * Data are ready to be read after 628 usec from POWERDOWN signal
+	 * (PDN) = 1
+	 */
+	*temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR;
+	return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+	.get_temp = thermal_get_temp,
+};
+
+static int __maybe_unused spear_thermal_suspend(struct device *dev)
+{
+	struct thermal_zone_device *spear_thermal = dev_get_drvdata(dev);
+	struct spear_thermal_dev *stdev = spear_thermal->devdata;
+	unsigned int actual_mask = 0;
+
+	/* Disable SPEAr Thermal Sensor */
+	actual_mask = readl_relaxed(stdev->thermal_base);
+	writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
+
+	clk_disable(stdev->clk);
+	dev_info(dev, "Suspended.\n");
+
+	return 0;
+}
+
+static int __maybe_unused spear_thermal_resume(struct device *dev)
+{
+	struct thermal_zone_device *spear_thermal = dev_get_drvdata(dev);
+	struct spear_thermal_dev *stdev = spear_thermal->devdata;
+	unsigned int actual_mask = 0;
+	int ret = 0;
+
+	ret = clk_enable(stdev->clk);
+	if (ret) {
+		dev_err(dev, "Can't enable clock\n");
+		return ret;
+	}
+
+	/* Enable SPEAr Thermal Sensor */
+	actual_mask = readl_relaxed(stdev->thermal_base);
+	writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base);
+
+	dev_info(dev, "Resumed.\n");
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend,
+		spear_thermal_resume);
+
+static int spear_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *spear_thermal = NULL;
+	struct spear_thermal_dev *stdev;
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	int ret = 0, val;
+
+	if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) {
+		dev_err(&pdev->dev, "Failed: DT Pdata not passed\n");
+		return -EINVAL;
+	}
+
+	stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
+	if (!stdev)
+		return -ENOMEM;
+
+	/* Enable thermal sensor */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	stdev->thermal_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(stdev->thermal_base))
+		return PTR_ERR(stdev->thermal_base);
+
+	stdev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(stdev->clk)) {
+		dev_err(&pdev->dev, "Can't get clock\n");
+		return PTR_ERR(stdev->clk);
+	}
+
+	ret = clk_enable(stdev->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't enable clock\n");
+		return ret;
+	}
+
+	stdev->flags = val;
+	writel_relaxed(stdev->flags, stdev->thermal_base);
+
+	spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
+				stdev, &ops, NULL, 0, 0);
+	if (IS_ERR(spear_thermal)) {
+		dev_err(&pdev->dev, "thermal zone device is NULL\n");
+		ret = PTR_ERR(spear_thermal);
+		goto disable_clk;
+	}
+	ret = thermal_zone_device_enable(spear_thermal);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable thermal zone\n");
+		goto unregister_tzd;
+	}
+
+	platform_set_drvdata(pdev, spear_thermal);
+
+	dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n",
+			stdev->thermal_base);
+
+	return 0;
+
+unregister_tzd:
+	thermal_zone_device_unregister(spear_thermal);
+disable_clk:
+	clk_disable(stdev->clk);
+
+	return ret;
+}
+
+static int spear_thermal_exit(struct platform_device *pdev)
+{
+	unsigned int actual_mask = 0;
+	struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
+	struct spear_thermal_dev *stdev = spear_thermal->devdata;
+
+	thermal_zone_device_unregister(spear_thermal);
+
+	/* Disable SPEAr Thermal Sensor */
+	actual_mask = readl_relaxed(stdev->thermal_base);
+	writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
+
+	clk_disable(stdev->clk);
+
+	return 0;
+}
+
+static const struct of_device_id spear_thermal_id_table[] = {
+	{ .compatible = "st,thermal-spear1340" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_thermal_id_table);
+
+static struct platform_driver spear_thermal_driver = {
+	.probe = spear_thermal_probe,
+	.remove = spear_thermal_exit,
+	.driver = {
+		.name = "spear_thermal",
+		.pm = &spear_thermal_pm_ops,
+		.of_match_table = spear_thermal_id_table,
+	},
+};
+
+module_platform_driver(spear_thermal_driver);
+
+MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>");
+MODULE_DESCRIPTION("SPEAr thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
new file mode 100644
index 000000000..ac884514f
--- /dev/null
+++ b/drivers/thermal/sprd_thermal.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 Spreadtrum Communications Inc.
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define SPRD_THM_CTL			0x0
+#define SPRD_THM_INT_EN			0x4
+#define SPRD_THM_INT_STS		0x8
+#define SPRD_THM_INT_RAW_STS		0xc
+#define SPRD_THM_DET_PERIOD		0x10
+#define SPRD_THM_INT_CLR		0x14
+#define SPRD_THM_INT_CLR_ST		0x18
+#define SPRD_THM_MON_PERIOD		0x4c
+#define SPRD_THM_MON_CTL		0x50
+#define SPRD_THM_INTERNAL_STS1		0x54
+#define SPRD_THM_RAW_READ_MSK		0x3ff
+
+#define SPRD_THM_OFFSET(id)		((id) * 0x4)
+#define SPRD_THM_TEMP(id)		(SPRD_THM_OFFSET(id) + 0x5c)
+#define SPRD_THM_THRES(id)		(SPRD_THM_OFFSET(id) + 0x2c)
+
+#define SPRD_THM_SEN(id)		BIT((id) + 2)
+#define SPRD_THM_SEN_OVERHEAT_EN(id)	BIT((id) + 8)
+#define SPRD_THM_SEN_OVERHEAT_ALARM_EN(id)	BIT((id) + 0)
+
+/* bits definitions for register THM_CTL */
+#define SPRD_THM_SET_RDY_ST		BIT(13)
+#define SPRD_THM_SET_RDY		BIT(12)
+#define SPRD_THM_MON_EN			BIT(1)
+#define SPRD_THM_EN			BIT(0)
+
+/* bits definitions for register THM_INT_CTL */
+#define SPRD_THM_BIT_INT_EN		BIT(26)
+#define SPRD_THM_OVERHEAT_EN		BIT(25)
+#define SPRD_THM_OTP_TRIP_SHIFT		10
+
+/* bits definitions for register SPRD_THM_INTERNAL_STS1 */
+#define SPRD_THM_TEMPER_RDY		BIT(0)
+
+#define SPRD_THM_DET_PERIOD_DATA	0x800
+#define SPRD_THM_DET_PERIOD_MASK	GENMASK(19, 0)
+#define SPRD_THM_MON_MODE		0x7
+#define SPRD_THM_MON_MODE_MASK		GENMASK(3, 0)
+#define SPRD_THM_MON_PERIOD_DATA	0x10
+#define SPRD_THM_MON_PERIOD_MASK	GENMASK(15, 0)
+#define SPRD_THM_THRES_MASK		GENMASK(19, 0)
+#define SPRD_THM_INT_CLR_MASK		GENMASK(24, 0)
+
+/* thermal sensor calibration parameters */
+#define SPRD_THM_TEMP_LOW		-40000
+#define SPRD_THM_TEMP_HIGH		120000
+#define SPRD_THM_OTP_TEMP		120000
+#define SPRD_THM_HOT_TEMP		75000
+#define SPRD_THM_RAW_DATA_LOW		0
+#define SPRD_THM_RAW_DATA_HIGH		1000
+#define SPRD_THM_SEN_NUM		8
+#define SPRD_THM_DT_OFFSET		24
+#define SPRD_THM_RATION_OFFSET		17
+#define SPRD_THM_RATION_SIGN		16
+
+#define SPRD_THM_RDYST_POLLING_TIME	10
+#define SPRD_THM_RDYST_TIMEOUT		700
+#define SPRD_THM_TEMP_READY_POLL_TIME	10000
+#define SPRD_THM_TEMP_READY_TIMEOUT	600000
+#define SPRD_THM_MAX_SENSOR		8
+
+struct sprd_thermal_sensor {
+	struct thermal_zone_device *tzd;
+	struct sprd_thermal_data *data;
+	struct device *dev;
+	int cal_slope;
+	int cal_offset;
+	int id;
+};
+
+struct sprd_thermal_data {
+	const struct sprd_thm_variant_data *var_data;
+	struct sprd_thermal_sensor *sensor[SPRD_THM_MAX_SENSOR];
+	struct clk *clk;
+	void __iomem *base;
+	u32 ratio_off;
+	int ratio_sign;
+	int nr_sensors;
+};
+
+/*
+ * The conversion between ADC and temperature is based on linear relationship,
+ * and use idea_k to specify the slope and ideal_b to specify the offset.
+ *
+ * Since different Spreadtrum SoCs have different ideal_k and ideal_b,
+ * we should save ideal_k and ideal_b in the device data structure.
+ */
+struct sprd_thm_variant_data {
+	u32 ideal_k;
+	u32 ideal_b;
+};
+
+static const struct sprd_thm_variant_data ums512_data = {
+	.ideal_k = 262,
+	.ideal_b = 66400,
+};
+
+static inline void sprd_thm_update_bits(void __iomem *reg, u32 mask, u32 val)
+{
+	u32 tmp, orig;
+
+	orig = readl(reg);
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+	writel(tmp, reg);
+}
+
+static int sprd_thm_cal_read(struct device_node *np, const char *cell_id,
+			     u32 *val)
+{
+	struct nvmem_cell *cell;
+	void *buf;
+	size_t len;
+
+	cell = of_nvmem_cell_get(np, cell_id);
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	if (len > sizeof(u32)) {
+		kfree(buf);
+		return -EINVAL;
+	}
+
+	memcpy(val, buf, len);
+
+	kfree(buf);
+	return 0;
+}
+
+static int sprd_thm_sensor_calibration(struct device_node *np,
+				       struct sprd_thermal_data *thm,
+				       struct sprd_thermal_sensor *sen)
+{
+	int ret;
+	/*
+	 * According to thermal datasheet, the default calibration offset is 64,
+	 * and the default ratio is 1000.
+	 */
+	int dt_offset = 64, ratio = 1000;
+
+	ret = sprd_thm_cal_read(np, "sen_delta_cal", &dt_offset);
+	if (ret)
+		return ret;
+
+	ratio += thm->ratio_sign * thm->ratio_off;
+
+	/*
+	 * According to the ideal slope K and ideal offset B, combined with
+	 * calibration value of thermal from efuse, then calibrate the real
+	 * slope k and offset b:
+	 * k_cal = (k * ratio) / 1000.
+	 * b_cal = b + (dt_offset - 64) * 500.
+	 */
+	sen->cal_slope = (thm->var_data->ideal_k * ratio) / 1000;
+	sen->cal_offset = thm->var_data->ideal_b + (dt_offset - 128) * 250;
+
+	return 0;
+}
+
+static int sprd_thm_rawdata_to_temp(struct sprd_thermal_sensor *sen,
+				    u32 rawdata)
+{
+	clamp(rawdata, (u32)SPRD_THM_RAW_DATA_LOW, (u32)SPRD_THM_RAW_DATA_HIGH);
+
+	/*
+	 * According to the thermal datasheet, the formula of converting
+	 * adc value to the temperature value should be:
+	 * T_final = k_cal * x - b_cal.
+	 */
+	return sen->cal_slope * rawdata - sen->cal_offset;
+}
+
+static int sprd_thm_temp_to_rawdata(int temp, struct sprd_thermal_sensor *sen)
+{
+	u32 val;
+
+	clamp(temp, (int)SPRD_THM_TEMP_LOW, (int)SPRD_THM_TEMP_HIGH);
+
+	/*
+	 * According to the thermal datasheet, the formula of converting
+	 * adc value to the temperature value should be:
+	 * T_final = k_cal * x - b_cal.
+	 */
+	val = (temp + sen->cal_offset) / sen->cal_slope;
+
+	return clamp(val, val, (u32)(SPRD_THM_RAW_DATA_HIGH - 1));
+}
+
+static int sprd_thm_read_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct sprd_thermal_sensor *sen = tz->devdata;
+	u32 data;
+
+	data = readl(sen->data->base + SPRD_THM_TEMP(sen->id)) &
+		SPRD_THM_RAW_READ_MSK;
+
+	*temp = sprd_thm_rawdata_to_temp(sen, data);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops sprd_thm_ops = {
+	.get_temp = sprd_thm_read_temp,
+};
+
+static int sprd_thm_poll_ready_status(struct sprd_thermal_data *thm)
+{
+	u32 val;
+	int ret;
+
+	/*
+	 * Wait for thermal ready status before configuring thermal parameters.
+	 */
+	ret = readl_poll_timeout(thm->base + SPRD_THM_CTL, val,
+				 !(val & SPRD_THM_SET_RDY_ST),
+				 SPRD_THM_RDYST_POLLING_TIME,
+				 SPRD_THM_RDYST_TIMEOUT);
+	if (ret)
+		return ret;
+
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_MON_EN,
+			     SPRD_THM_MON_EN);
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SET_RDY,
+			     SPRD_THM_SET_RDY);
+	return 0;
+}
+
+static int sprd_thm_wait_temp_ready(struct sprd_thermal_data *thm)
+{
+	u32 val;
+
+	/* Wait for first temperature data ready before reading temperature */
+	return readl_poll_timeout(thm->base + SPRD_THM_INTERNAL_STS1, val,
+				  !(val & SPRD_THM_TEMPER_RDY),
+				  SPRD_THM_TEMP_READY_POLL_TIME,
+				  SPRD_THM_TEMP_READY_TIMEOUT);
+}
+
+static int sprd_thm_set_ready(struct sprd_thermal_data *thm)
+{
+	int ret;
+
+	ret = sprd_thm_poll_ready_status(thm);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear interrupt status, enable thermal interrupt and enable thermal.
+	 *
+	 * The SPRD thermal controller integrates a hardware interrupt signal,
+	 * which means if the temperature is overheat, it will generate an
+	 * interrupt and notify the event to PMIC automatically to shutdown the
+	 * system. So here we should enable the interrupt bits, though we have
+	 * not registered an irq handler.
+	 */
+	writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
+	sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
+			     SPRD_THM_BIT_INT_EN, SPRD_THM_BIT_INT_EN);
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+			     SPRD_THM_EN, SPRD_THM_EN);
+	return 0;
+}
+
+static void sprd_thm_sensor_init(struct sprd_thermal_data *thm,
+				 struct sprd_thermal_sensor *sen)
+{
+	u32 otp_rawdata, hot_rawdata;
+
+	otp_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_OTP_TEMP, sen);
+	hot_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_HOT_TEMP, sen);
+
+	/* Enable the sensor' overheat temperature protection interrupt */
+	sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
+			     SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id),
+			     SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id));
+
+	/* Set the sensor' overheat and hot threshold temperature */
+	sprd_thm_update_bits(thm->base + SPRD_THM_THRES(sen->id),
+			     SPRD_THM_THRES_MASK,
+			     (otp_rawdata << SPRD_THM_OTP_TRIP_SHIFT) |
+			     hot_rawdata);
+
+	/* Enable the corresponding sensor */
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SEN(sen->id),
+			     SPRD_THM_SEN(sen->id));
+}
+
+static void sprd_thm_para_config(struct sprd_thermal_data *thm)
+{
+	/* Set the period of two valid temperature detection action */
+	sprd_thm_update_bits(thm->base + SPRD_THM_DET_PERIOD,
+			     SPRD_THM_DET_PERIOD_MASK, SPRD_THM_DET_PERIOD);
+
+	/* Set the sensors' monitor mode */
+	sprd_thm_update_bits(thm->base + SPRD_THM_MON_CTL,
+			     SPRD_THM_MON_MODE_MASK, SPRD_THM_MON_MODE);
+
+	/* Set the sensors' monitor period */
+	sprd_thm_update_bits(thm->base + SPRD_THM_MON_PERIOD,
+			     SPRD_THM_MON_PERIOD_MASK, SPRD_THM_MON_PERIOD);
+}
+
+static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on)
+{
+	struct thermal_zone_device *tzd = sen->tzd;
+
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
+}
+
+static int sprd_thm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *sen_child;
+	struct sprd_thermal_data *thm;
+	struct sprd_thermal_sensor *sen;
+	const struct sprd_thm_variant_data *pdata;
+	int ret, i;
+	u32 val;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No matching driver data found\n");
+		return -EINVAL;
+	}
+
+	thm = devm_kzalloc(&pdev->dev, sizeof(*thm), GFP_KERNEL);
+	if (!thm)
+		return -ENOMEM;
+
+	thm->var_data = pdata;
+	thm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(thm->base))
+		return PTR_ERR(thm->base);
+
+	thm->nr_sensors = of_get_child_count(np);
+	if (thm->nr_sensors == 0 || thm->nr_sensors > SPRD_THM_MAX_SENSOR) {
+		dev_err(&pdev->dev, "incorrect sensor count\n");
+		return -EINVAL;
+	}
+
+	thm->clk = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(thm->clk)) {
+		dev_err(&pdev->dev, "failed to get enable clock\n");
+		return PTR_ERR(thm->clk);
+	}
+
+	ret = clk_prepare_enable(thm->clk);
+	if (ret)
+		return ret;
+
+	sprd_thm_para_config(thm);
+
+	ret = sprd_thm_cal_read(np, "thm_sign_cal", &val);
+	if (ret)
+		goto disable_clk;
+
+	if (val > 0)
+		thm->ratio_sign = -1;
+	else
+		thm->ratio_sign = 1;
+
+	ret = sprd_thm_cal_read(np, "thm_ratio_cal", &thm->ratio_off);
+	if (ret)
+		goto disable_clk;
+
+	for_each_child_of_node(np, sen_child) {
+		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
+		if (!sen) {
+			ret = -ENOMEM;
+			goto of_put;
+		}
+
+		sen->data = thm;
+		sen->dev = &pdev->dev;
+
+		ret = of_property_read_u32(sen_child, "reg", &sen->id);
+		if (ret) {
+			dev_err(&pdev->dev, "get sensor reg failed");
+			goto of_put;
+		}
+
+		ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
+		if (ret) {
+			dev_err(&pdev->dev, "efuse cal analysis failed");
+			goto of_put;
+		}
+
+		sprd_thm_sensor_init(thm, sen);
+
+		sen->tzd = devm_thermal_of_zone_register(sen->dev,
+							 sen->id,
+							 sen,
+							 &sprd_thm_ops);
+		if (IS_ERR(sen->tzd)) {
+			dev_err(&pdev->dev, "register thermal zone failed %d\n",
+				sen->id);
+			ret = PTR_ERR(sen->tzd);
+			goto of_put;
+		}
+
+		thm->sensor[sen->id] = sen;
+	}
+	/* sen_child set to NULL at this point */
+
+	ret = sprd_thm_set_ready(thm);
+	if (ret)
+		goto of_put;
+
+	ret = sprd_thm_wait_temp_ready(thm);
+	if (ret)
+		goto of_put;
+
+	for (i = 0; i < thm->nr_sensors; i++)
+		sprd_thm_toggle_sensor(thm->sensor[i], true);
+
+	platform_set_drvdata(pdev, thm);
+	return 0;
+
+of_put:
+	of_node_put(sen_child);
+disable_clk:
+	clk_disable_unprepare(thm->clk);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void sprd_thm_hw_suspend(struct sprd_thermal_data *thm)
+{
+	int i;
+
+	for (i = 0; i < thm->nr_sensors; i++) {
+		sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+				     SPRD_THM_SEN(thm->sensor[i]->id), 0);
+	}
+
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+			     SPRD_THM_EN, 0x0);
+}
+
+static int sprd_thm_suspend(struct device *dev)
+{
+	struct sprd_thermal_data *thm = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < thm->nr_sensors; i++)
+		sprd_thm_toggle_sensor(thm->sensor[i], false);
+
+	sprd_thm_hw_suspend(thm);
+	clk_disable_unprepare(thm->clk);
+
+	return 0;
+}
+
+static int sprd_thm_hw_resume(struct sprd_thermal_data *thm)
+{
+	int ret, i;
+
+	for (i = 0; i < thm->nr_sensors; i++) {
+		sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+				     SPRD_THM_SEN(thm->sensor[i]->id),
+				     SPRD_THM_SEN(thm->sensor[i]->id));
+	}
+
+	ret = sprd_thm_poll_ready_status(thm);
+	if (ret)
+		return ret;
+
+	writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+			     SPRD_THM_EN, SPRD_THM_EN);
+	return sprd_thm_wait_temp_ready(thm);
+}
+
+static int sprd_thm_resume(struct device *dev)
+{
+	struct sprd_thermal_data *thm = dev_get_drvdata(dev);
+	int ret, i;
+
+	ret = clk_prepare_enable(thm->clk);
+	if (ret)
+		return ret;
+
+	ret = sprd_thm_hw_resume(thm);
+	if (ret)
+		goto disable_clk;
+
+	for (i = 0; i < thm->nr_sensors; i++)
+		sprd_thm_toggle_sensor(thm->sensor[i], true);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(thm->clk);
+	return ret;
+}
+#endif
+
+static int sprd_thm_remove(struct platform_device *pdev)
+{
+	struct sprd_thermal_data *thm = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < thm->nr_sensors; i++) {
+		sprd_thm_toggle_sensor(thm->sensor[i], false);
+		devm_thermal_of_zone_unregister(&pdev->dev,
+						thm->sensor[i]->tzd);
+	}
+
+	clk_disable_unprepare(thm->clk);
+	return 0;
+}
+
+static const struct of_device_id sprd_thermal_of_match[] = {
+	{ .compatible = "sprd,ums512-thermal", .data = &ums512_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sprd_thermal_of_match);
+
+static const struct dev_pm_ops sprd_thermal_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sprd_thm_suspend, sprd_thm_resume)
+};
+
+static struct platform_driver sprd_thermal_driver = {
+	.probe = sprd_thm_probe,
+	.remove = sprd_thm_remove,
+	.driver = {
+		.name = "sprd-thermal",
+		.pm = &sprd_thermal_pm_ops,
+		.of_match_table = sprd_thermal_of_match,
+	},
+};
+
+module_platform_driver(sprd_thermal_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@unisoc.com>");
+MODULE_DESCRIPTION("Spreadtrum thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig
new file mode 100644
index 000000000..58ece3819
--- /dev/null
+++ b/drivers/thermal/st/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# STMicroelectronics thermal drivers configuration
+#
+
+config ST_THERMAL
+	tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
+	help
+	  Support for thermal sensors on STMicroelectronics STi series of SoCs.
+
+config ST_THERMAL_SYSCFG
+	select ST_THERMAL
+	tristate "STi series syscfg register access based thermal sensors"
+
+config ST_THERMAL_MEMMAP
+	select ST_THERMAL
+	tristate "STi series memory mapped access based thermal sensors"
+
+config STM32_THERMAL
+	tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs"
+	depends on MACH_STM32MP157
+	default y
+	help
+	  Support for thermal framework on STMicroelectronics STM32 series of
+	  SoCs. This thermal driver allows to access to general thermal framework
+	  functionalities and to access to SoC sensor functionalities. This
+	  configuration is fully dependent of MACH_STM32MP157.
diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile
new file mode 100644
index 000000000..c4cfa3c4a
--- /dev/null
+++ b/drivers/thermal/st/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ST_THERMAL)		:= st_thermal.o
+obj-$(CONFIG_ST_THERMAL_SYSCFG)		+= st_thermal_syscfg.o
+obj-$(CONFIG_ST_THERMAL_MEMMAP)		+= st_thermal_memmap.o
+obj-$(CONFIG_STM32_THERMAL)		+= stm_thermal.o
diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
new file mode 100644
index 000000000..1276b9560
--- /dev/null
+++ b/drivers/thermal/st/st_thermal.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ST Thermal Sensor Driver core routines
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "st_thermal.h"
+
+/* The Thermal Framework expects millidegrees */
+#define mcelsius(temp)			((temp) * 1000)
+
+/*
+ * Function to allocate regfields which are common
+ * between syscfg and memory mapped based sensors
+ */
+static int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct regmap *regmap = sensor->regmap;
+	const struct reg_field *reg_fields = sensor->cdata->reg_fields;
+
+	sensor->dcorrect = devm_regmap_field_alloc(dev, regmap,
+						   reg_fields[DCORRECT]);
+
+	sensor->overflow = devm_regmap_field_alloc(dev, regmap,
+						   reg_fields[OVERFLOW]);
+
+	sensor->temp_data = devm_regmap_field_alloc(dev, regmap,
+						    reg_fields[DATA]);
+
+	if (IS_ERR(sensor->dcorrect) ||
+	    IS_ERR(sensor->overflow) ||
+	    IS_ERR(sensor->temp_data)) {
+		dev_err(dev, "failed to allocate common regfields\n");
+		return -EINVAL;
+	}
+
+	return sensor->ops->alloc_regfields(sensor);
+}
+
+static int st_thermal_sensor_on(struct st_thermal_sensor *sensor)
+{
+	int ret;
+	struct device *dev = sensor->dev;
+
+	ret = clk_prepare_enable(sensor->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clk\n");
+		return ret;
+	}
+
+	ret = sensor->ops->power_ctrl(sensor, POWER_ON);
+	if (ret) {
+		dev_err(dev, "failed to power on sensor\n");
+		clk_disable_unprepare(sensor->clk);
+	}
+
+	return ret;
+}
+
+static int st_thermal_sensor_off(struct st_thermal_sensor *sensor)
+{
+	int ret;
+
+	ret = sensor->ops->power_ctrl(sensor, POWER_OFF);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(sensor->clk);
+
+	return 0;
+}
+
+static int st_thermal_calibration(struct st_thermal_sensor *sensor)
+{
+	int ret;
+	unsigned int val;
+	struct device *dev = sensor->dev;
+
+	/* Check if sensor calibration data is already written */
+	ret = regmap_field_read(sensor->dcorrect, &val);
+	if (ret) {
+		dev_err(dev, "failed to read calibration data\n");
+		return ret;
+	}
+
+	if (!val) {
+		/*
+		 * Sensor calibration value not set by bootloader,
+		 * default calibration data to be used
+		 */
+		ret = regmap_field_write(sensor->dcorrect,
+					 sensor->cdata->calibration_val);
+		if (ret)
+			dev_err(dev, "failed to set calibration data\n");
+	}
+
+	return ret;
+}
+
+/* Callback to get temperature from HW*/
+static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
+{
+	struct st_thermal_sensor *sensor = th->devdata;
+	struct device *dev = sensor->dev;
+	unsigned int temp;
+	unsigned int overflow;
+	int ret;
+
+	ret = regmap_field_read(sensor->overflow, &overflow);
+	if (ret)
+		return ret;
+	if (overflow)
+		return -EIO;
+
+	ret = regmap_field_read(sensor->temp_data, &temp);
+	if (ret)
+		return ret;
+
+	temp += sensor->cdata->temp_adjust_val;
+	temp = mcelsius(temp);
+
+	dev_dbg(dev, "temperature: %d\n", temp);
+
+	*temperature = temp;
+
+	return 0;
+}
+
+static int st_thermal_get_trip_type(struct thermal_zone_device *th,
+				int trip, enum thermal_trip_type *type)
+{
+	struct st_thermal_sensor *sensor = th->devdata;
+	struct device *dev = sensor->dev;
+
+	switch (trip) {
+	case 0:
+		*type = THERMAL_TRIP_CRITICAL;
+		break;
+	default:
+		dev_err(dev, "invalid trip point\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
+				    int trip, int *temp)
+{
+	struct st_thermal_sensor *sensor = th->devdata;
+	struct device *dev = sensor->dev;
+
+	switch (trip) {
+	case 0:
+		*temp = mcelsius(sensor->cdata->crit_temp);
+		break;
+	default:
+		dev_err(dev, "Invalid trip point\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops st_tz_ops = {
+	.get_temp	= st_thermal_get_temp,
+	.get_trip_type	= st_thermal_get_trip_type,
+	.get_trip_temp	= st_thermal_get_trip_temp,
+};
+
+int st_thermal_register(struct platform_device *pdev,
+			const struct of_device_id *st_thermal_of_match)
+{
+	struct st_thermal_sensor *sensor;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *match;
+
+	int polling_delay;
+	int ret;
+
+	if (!np) {
+		dev_err(dev, "device tree node not found\n");
+		return -EINVAL;
+	}
+
+	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return -ENOMEM;
+
+	sensor->dev = dev;
+
+	match = of_match_device(st_thermal_of_match, dev);
+	if (!(match && match->data))
+		return -EINVAL;
+
+	sensor->cdata = match->data;
+	if (!sensor->cdata->ops)
+		return -EINVAL;
+
+	sensor->ops = sensor->cdata->ops;
+
+	ret = (sensor->ops->regmap_init)(sensor);
+	if (ret)
+		return ret;
+
+	ret = st_thermal_alloc_regfields(sensor);
+	if (ret)
+		return ret;
+
+	sensor->clk = devm_clk_get(dev, "thermal");
+	if (IS_ERR(sensor->clk)) {
+		dev_err(dev, "failed to fetch clock\n");
+		return PTR_ERR(sensor->clk);
+	}
+
+	if (sensor->ops->register_enable_irq) {
+		ret = sensor->ops->register_enable_irq(sensor);
+		if (ret)
+			return ret;
+	}
+
+	ret = st_thermal_sensor_on(sensor);
+	if (ret)
+		return ret;
+
+	ret = st_thermal_calibration(sensor);
+	if (ret)
+		goto sensor_off;
+
+	polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
+
+	sensor->thermal_dev =
+		thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
+					     &st_tz_ops, NULL, 0, polling_delay);
+	if (IS_ERR(sensor->thermal_dev)) {
+		dev_err(dev, "failed to register thermal zone device\n");
+		ret = PTR_ERR(sensor->thermal_dev);
+		goto sensor_off;
+	}
+	ret = thermal_zone_device_enable(sensor->thermal_dev);
+	if (ret)
+		goto tzd_unregister;
+
+	platform_set_drvdata(pdev, sensor);
+
+	return 0;
+
+tzd_unregister:
+	thermal_zone_device_unregister(sensor->thermal_dev);
+sensor_off:
+	st_thermal_sensor_off(sensor);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(st_thermal_register);
+
+int st_thermal_unregister(struct platform_device *pdev)
+{
+	struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+	st_thermal_sensor_off(sensor);
+	thermal_zone_device_unregister(sensor->thermal_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_thermal_unregister);
+
+#ifdef CONFIG_PM_SLEEP
+static int st_thermal_suspend(struct device *dev)
+{
+	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	return st_thermal_sensor_off(sensor);
+}
+
+static int st_thermal_resume(struct device *dev)
+{
+	int ret;
+	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	ret = st_thermal_sensor_on(sensor);
+	if (ret)
+		return ret;
+
+	ret = st_thermal_calibration(sensor);
+	if (ret)
+		return ret;
+
+	if (sensor->ops->enable_irq) {
+		ret = sensor->ops->enable_irq(sensor);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
+EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/st_thermal.h b/drivers/thermal/st/st_thermal.h
new file mode 100644
index 000000000..d661b2f2e
--- /dev/null
+++ b/drivers/thermal/st/st_thermal.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ST Thermal Sensor Driver for STi series of SoCs
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#ifndef __STI_THERMAL_SYSCFG_H
+#define __STI_THERMAL_SYSCFG_H
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+enum st_thermal_regfield_ids {
+	INT_THRESH_HI = 0, /* Top two regfield IDs are mutually exclusive */
+	TEMP_PWR = 0,
+	DCORRECT,
+	OVERFLOW,
+	DATA,
+	INT_ENABLE,
+
+	MAX_REGFIELDS
+};
+
+/* Thermal sensor power states */
+enum st_thermal_power_state {
+	POWER_OFF = 0,
+	POWER_ON
+};
+
+struct st_thermal_sensor;
+
+/**
+ * Description of private thermal sensor ops.
+ *
+ * @power_ctrl:		Function for powering on/off a sensor. Clock to the
+ *			sensor is also controlled from this function.
+ * @alloc_regfields: 	Allocate regmap register fields, specific to a sensor.
+ * @do_memmap_regmap: 	Memory map the thermal register space and init regmap
+ *			instance or find regmap instance.
+ * @register_irq: 	Register an interrupt handler for a sensor.
+ */
+struct st_thermal_sensor_ops {
+	int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state);
+	int (*alloc_regfields)(struct st_thermal_sensor *);
+	int (*regmap_init)(struct st_thermal_sensor *);
+	int (*register_enable_irq)(struct st_thermal_sensor *);
+	int (*enable_irq)(struct st_thermal_sensor *);
+};
+
+/**
+ * Description of thermal driver compatible data.
+ *
+ * @reg_fields:		Pointer to the regfields array for a sensor.
+ * @sys_compat:		Pointer to the syscon node compatible string.
+ * @ops: 		Pointer to private thermal ops for a sensor.
+ * @calibration_val: 	Default calibration value to be written to the DCORRECT
+ *			register field for a sensor.
+ * @temp_adjust_val: 	Value to be added/subtracted from the data read from
+ *			the sensor. If value needs to be added please provide a
+ *			positive value and if it is to be subtracted please
+ * 			provide a negative value.
+ * @crit_temp: 		The temperature beyond which the SoC should be shutdown
+ * 			to prevent damage.
+ */
+struct st_thermal_compat_data {
+	char *sys_compat;
+	const struct reg_field *reg_fields;
+	const struct st_thermal_sensor_ops *ops;
+	unsigned int calibration_val;
+	int temp_adjust_val;
+	int crit_temp;
+};
+
+struct st_thermal_sensor {
+	struct device *dev;
+	struct thermal_zone_device *thermal_dev;
+	const struct st_thermal_sensor_ops *ops;
+	const struct st_thermal_compat_data *cdata;
+	struct clk *clk;
+	struct regmap *regmap;
+	struct regmap_field *pwr;
+	struct regmap_field *dcorrect;
+	struct regmap_field *overflow;
+	struct regmap_field *temp_data;
+	struct regmap_field *int_thresh_hi;
+	struct regmap_field *int_enable;
+	int irq;
+	void __iomem *mmio_base;
+};
+
+extern int st_thermal_register(struct platform_device *pdev,
+			       const struct of_device_id *st_thermal_of_match);
+extern int st_thermal_unregister(struct platform_device *pdev);
+extern const struct dev_pm_ops st_thermal_pm_ops;
+
+#endif /* __STI_RESET_SYSCFG_H */
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
new file mode 100644
index 000000000..d68596c40
--- /dev/null
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ST Thermal Sensor Driver for memory mapped sensors.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+
+#include "st_thermal.h"
+
+#define STIH416_MPE_CONF			0x0
+#define STIH416_MPE_STATUS			0x4
+#define STIH416_MPE_INT_THRESH			0x8
+#define STIH416_MPE_INT_EN			0xC
+
+/* Power control bits for the memory mapped thermal sensor */
+#define THERMAL_PDN				BIT(4)
+#define THERMAL_SRSTN				BIT(10)
+
+static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = {
+	/*
+	 * According to the STIH416 MPE temp sensor data sheet -
+	 * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be
+	 * written simultaneously for powering on and off the temperature
+	 * sensor. regmap_update_bits() will be used to update the register.
+	 */
+	[INT_THRESH_HI]	= REG_FIELD(STIH416_MPE_INT_THRESH, 	0,  7),
+	[DCORRECT]	= REG_FIELD(STIH416_MPE_CONF,		5,  9),
+	[OVERFLOW]	= REG_FIELD(STIH416_MPE_STATUS,		9,  9),
+	[DATA]		= REG_FIELD(STIH416_MPE_STATUS,		11, 18),
+	[INT_ENABLE]	= REG_FIELD(STIH416_MPE_INT_EN,		0,  0),
+};
+
+static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata)
+{
+	struct st_thermal_sensor *sensor = sdata;
+
+	thermal_zone_device_update(sensor->thermal_dev,
+				   THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+/* Private ops for the Memory Mapped based thermal sensors */
+static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor,
+			      enum st_thermal_power_state power_state)
+{
+	const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN);
+	const unsigned int val = power_state ? mask : 0;
+
+	return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val);
+}
+
+static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct regmap *regmap = sensor->regmap;
+	const struct reg_field *reg_fields = sensor->cdata->reg_fields;
+
+	sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap,
+						reg_fields[INT_THRESH_HI]);
+	sensor->int_enable = devm_regmap_field_alloc(dev, regmap,
+						reg_fields[INT_ENABLE]);
+
+	if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) {
+		dev_err(dev, "failed to alloc mmap regfields\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st_mmap_enable_irq(struct st_thermal_sensor *sensor)
+{
+	int ret;
+
+	/* Set upper critical threshold */
+	ret = regmap_field_write(sensor->int_thresh_hi,
+				 sensor->cdata->crit_temp -
+				 sensor->cdata->temp_adjust_val);
+	if (ret)
+		return ret;
+
+	return regmap_field_write(sensor->int_enable, 1);
+}
+
+static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	int ret;
+
+	sensor->irq = platform_get_irq(pdev, 0);
+	if (sensor->irq < 0)
+		return sensor->irq;
+
+	ret = devm_request_threaded_irq(dev, sensor->irq,
+					NULL, st_mmap_thermal_trip_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev->driver->name, sensor);
+	if (ret) {
+		dev_err(dev, "failed to register IRQ %d\n", sensor->irq);
+		return ret;
+	}
+
+	return st_mmap_enable_irq(sensor);
+}
+
+static const struct regmap_config st_416mpe_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int st_mmap_regmap_init(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	sensor->mmio_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(sensor->mmio_base))
+		return PTR_ERR(sensor->mmio_base);
+
+	sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base,
+				&st_416mpe_regmap_config);
+	if (IS_ERR(sensor->regmap)) {
+		dev_err(dev, "failed to initialise regmap\n");
+		return PTR_ERR(sensor->regmap);
+	}
+
+	return 0;
+}
+
+static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
+	.power_ctrl		= st_mmap_power_ctrl,
+	.alloc_regfields	= st_mmap_alloc_regfields,
+	.regmap_init		= st_mmap_regmap_init,
+	.register_enable_irq	= st_mmap_register_enable_irq,
+	.enable_irq		= st_mmap_enable_irq,
+};
+
+/* Compatible device data stih416 mpe thermal sensor */
+static const struct st_thermal_compat_data st_416mpe_cdata = {
+	.reg_fields		= st_mmap_thermal_regfields,
+	.ops			= &st_mmap_sensor_ops,
+	.calibration_val	= 14,
+	.temp_adjust_val	= -95,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data stih407 thermal sensor */
+static const struct st_thermal_compat_data st_407_cdata = {
+	.reg_fields		= st_mmap_thermal_regfields,
+	.ops			= &st_mmap_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= -95,
+	.crit_temp		= 120,
+};
+
+static const struct of_device_id st_mmap_thermal_of_match[] = {
+	{ .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata },
+	{ .compatible = "st,stih407-thermal",     .data = &st_407_cdata },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
+
+static int st_mmap_probe(struct platform_device *pdev)
+{
+	return st_thermal_register(pdev,  st_mmap_thermal_of_match);
+}
+
+static int st_mmap_remove(struct platform_device *pdev)
+{
+	return st_thermal_unregister(pdev);
+}
+
+static struct platform_driver st_mmap_thermal_driver = {
+	.driver = {
+		.name	= "st_thermal_mmap",
+		.pm     = &st_thermal_pm_ops,
+		.of_match_table = st_mmap_thermal_of_match,
+	},
+	.probe		= st_mmap_probe,
+	.remove		= st_mmap_remove,
+};
+
+module_platform_driver(st_mmap_thermal_driver);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/st_thermal_syscfg.c b/drivers/thermal/st/st_thermal_syscfg.c
new file mode 100644
index 000000000..94efecf35
--- /dev/null
+++ b/drivers/thermal/st/st_thermal_syscfg.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ST Thermal Sensor Driver for syscfg based sensors.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+
+#include "st_thermal.h"
+
+/* STiH415 */
+#define STIH415_SYSCFG_FRONT(num)		((num - 100) * 4)
+#define STIH415_SAS_THSENS_CONF			STIH415_SYSCFG_FRONT(178)
+#define STIH415_SAS_THSENS_STATUS		STIH415_SYSCFG_FRONT(198)
+#define STIH415_SYSCFG_MPE(num)			((num - 600) * 4)
+#define STIH415_MPE_THSENS_CONF			STIH415_SYSCFG_MPE(607)
+#define STIH415_MPE_THSENS_STATUS		STIH415_SYSCFG_MPE(667)
+
+/* STiH416 */
+#define STIH416_SYSCFG_FRONT(num)		((num - 1000) * 4)
+#define STIH416_SAS_THSENS_CONF			STIH416_SYSCFG_FRONT(1552)
+#define STIH416_SAS_THSENS_STATUS1		STIH416_SYSCFG_FRONT(1554)
+#define STIH416_SAS_THSENS_STATUS2		STIH416_SYSCFG_FRONT(1594)
+
+/* STiD127 */
+#define STID127_SYSCFG_CPU(num)			((num - 700) * 4)
+#define STID127_THSENS_CONF			STID127_SYSCFG_CPU(743)
+#define STID127_THSENS_STATUS			STID127_SYSCFG_CPU(767)
+
+static const struct reg_field st_415sas_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STIH415_SAS_THSENS_CONF,   9,  9),
+	[DCORRECT] = REG_FIELD(STIH415_SAS_THSENS_CONF,   4,  8),
+	[OVERFLOW] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 8,  8),
+	[DATA] 	   = REG_FIELD(STIH415_SAS_THSENS_STATUS, 10, 16),
+};
+
+static const struct reg_field st_415mpe_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STIH415_MPE_THSENS_CONF,   8,  8),
+	[DCORRECT] = REG_FIELD(STIH415_MPE_THSENS_CONF,   3,  7),
+	[OVERFLOW] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 9,  9),
+	[DATA]     = REG_FIELD(STIH415_MPE_THSENS_STATUS, 11, 18),
+};
+
+static const struct reg_field st_416sas_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STIH416_SAS_THSENS_CONF,    9,  9),
+	[DCORRECT] = REG_FIELD(STIH416_SAS_THSENS_CONF,    4,  8),
+	[OVERFLOW] = REG_FIELD(STIH416_SAS_THSENS_STATUS1, 8,  8),
+	[DATA]     = REG_FIELD(STIH416_SAS_THSENS_STATUS2, 10, 16),
+};
+
+static const struct reg_field st_127_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STID127_THSENS_CONF,   7,  7),
+	[DCORRECT] = REG_FIELD(STID127_THSENS_CONF,   2,  6),
+	[OVERFLOW] = REG_FIELD(STID127_THSENS_STATUS, 9,  9),
+	[DATA]     = REG_FIELD(STID127_THSENS_STATUS, 11, 18),
+};
+
+/* Private OPs for System Configuration Register based thermal sensors */
+static int st_syscfg_power_ctrl(struct st_thermal_sensor *sensor,
+				enum st_thermal_power_state power_state)
+{
+	return regmap_field_write(sensor->pwr, power_state);
+}
+
+static int st_syscfg_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+
+	sensor->pwr = devm_regmap_field_alloc(dev, sensor->regmap,
+					sensor->cdata->reg_fields[TEMP_PWR]);
+
+	if (IS_ERR(sensor->pwr)) {
+		dev_err(dev, "failed to alloc syscfg regfields\n");
+		return PTR_ERR(sensor->pwr);
+	}
+
+	return 0;
+}
+
+static int st_syscfg_regmap_init(struct st_thermal_sensor *sensor)
+{
+	sensor->regmap =
+		syscon_regmap_lookup_by_compatible(sensor->cdata->sys_compat);
+	if (IS_ERR(sensor->regmap)) {
+		dev_err(sensor->dev, "failed to find syscfg regmap\n");
+		return PTR_ERR(sensor->regmap);
+	}
+
+	return 0;
+}
+
+static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = {
+	.power_ctrl		= st_syscfg_power_ctrl,
+	.alloc_regfields	= st_syscfg_alloc_regfields,
+	.regmap_init		= st_syscfg_regmap_init,
+};
+
+/* Compatible device data for stih415 sas thermal sensor */
+static const struct st_thermal_compat_data st_415sas_cdata = {
+	.sys_compat		= "st,stih415-front-syscfg",
+	.reg_fields		= st_415sas_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= 20,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data for stih415 mpe thermal sensor */
+static const struct st_thermal_compat_data st_415mpe_cdata = {
+	.sys_compat		= "st,stih415-system-syscfg",
+	.reg_fields		= st_415mpe_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= -103,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data for stih416 sas thermal sensor */
+static const struct st_thermal_compat_data st_416sas_cdata = {
+	.sys_compat		= "st,stih416-front-syscfg",
+	.reg_fields		= st_416sas_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= 20,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data for stid127 thermal sensor */
+static const struct st_thermal_compat_data st_127_cdata = {
+	.sys_compat		= "st,stid127-cpu-syscfg",
+	.reg_fields		= st_127_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 8,
+	.temp_adjust_val	= -103,
+	.crit_temp		= 120,
+};
+
+static const struct of_device_id st_syscfg_thermal_of_match[] = {
+	{ .compatible = "st,stih415-sas-thermal", .data = &st_415sas_cdata },
+	{ .compatible = "st,stih415-mpe-thermal", .data = &st_415mpe_cdata },
+	{ .compatible = "st,stih416-sas-thermal", .data = &st_416sas_cdata },
+	{ .compatible = "st,stid127-thermal",     .data = &st_127_cdata },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match);
+
+static int st_syscfg_probe(struct platform_device *pdev)
+{
+	return st_thermal_register(pdev, st_syscfg_thermal_of_match);
+}
+
+static int st_syscfg_remove(struct platform_device *pdev)
+{
+	return st_thermal_unregister(pdev);
+}
+
+static struct platform_driver st_syscfg_thermal_driver = {
+	.driver = {
+		.name	= "st_syscfg_thermal",
+		.pm     = &st_thermal_pm_ops,
+		.of_match_table =  st_syscfg_thermal_of_match,
+	},
+	.probe		= st_syscfg_probe,
+	.remove		= st_syscfg_remove,
+};
+module_platform_driver(st_syscfg_thermal_driver);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
new file mode 100644
index 000000000..78feb802a
--- /dev/null
+++ b/drivers/thermal/st/stm_thermal.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: David Hernandez Sanchez <david.hernandezsanchez@st.com> for
+ * STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+/* DTS register offsets */
+#define DTS_CFGR1_OFFSET	0x0
+#define DTS_T0VALR1_OFFSET	0x8
+#define DTS_RAMPVALR_OFFSET	0X10
+#define DTS_ITR1_OFFSET		0x14
+#define DTS_DR_OFFSET		0x1C
+#define DTS_SR_OFFSET		0x20
+#define DTS_ITENR_OFFSET	0x24
+#define DTS_ICIFR_OFFSET	0x28
+
+/* DTS_CFGR1 register mask definitions */
+#define HSREF_CLK_DIV_MASK	GENMASK(30, 24)
+#define TS1_SMP_TIME_MASK	GENMASK(19, 16)
+#define TS1_INTRIG_SEL_MASK	GENMASK(11, 8)
+
+/* DTS_T0VALR1 register mask definitions */
+#define TS1_T0_MASK		GENMASK(17, 16)
+#define TS1_FMT0_MASK		GENMASK(15, 0)
+
+/* DTS_RAMPVALR register mask definitions */
+#define TS1_RAMP_COEFF_MASK	GENMASK(15, 0)
+
+/* DTS_ITR1 register mask definitions */
+#define TS1_HITTHD_MASK		GENMASK(31, 16)
+#define TS1_LITTHD_MASK		GENMASK(15, 0)
+
+/* DTS_DR register mask definitions */
+#define TS1_MFREQ_MASK		GENMASK(15, 0)
+
+/* DTS_ITENR register mask definitions */
+#define ITENR_MASK		(GENMASK(2, 0) | GENMASK(6, 4))
+
+/* DTS_ICIFR register mask definitions */
+#define ICIFR_MASK		(GENMASK(2, 0) | GENMASK(6, 4))
+
+/* Less significant bit position definitions */
+#define TS1_T0_POS		16
+#define TS1_HITTHD_POS		16
+#define TS1_LITTHD_POS		0
+#define HSREF_CLK_DIV_POS	24
+
+/* DTS_CFGR1 bit definitions */
+#define TS1_EN			BIT(0)
+#define TS1_START		BIT(4)
+#define REFCLK_SEL		BIT(20)
+#define REFCLK_LSE		REFCLK_SEL
+#define Q_MEAS_OPT		BIT(21)
+#define CALIBRATION_CONTROL	Q_MEAS_OPT
+
+/* DTS_SR bit definitions */
+#define TS_RDY			BIT(15)
+/* Bit definitions below are common for DTS_SR, DTS_ITENR and DTS_CIFR */
+#define HIGH_THRESHOLD		BIT(2)
+#define LOW_THRESHOLD		BIT(1)
+
+/* Constants */
+#define ADJUST			100
+#define ONE_MHZ			1000000
+#define POLL_TIMEOUT		5000
+#define STARTUP_TIME		40
+#define TS1_T0_VAL0		30000  /* 30 celsius */
+#define TS1_T0_VAL1		130000 /* 130 celsius */
+#define NO_HW_TRIG		0
+#define SAMPLING_TIME		15
+
+struct stm_thermal_sensor {
+	struct device *dev;
+	struct thermal_zone_device *th_dev;
+	enum thermal_device_mode mode;
+	struct clk *clk;
+	unsigned int low_temp_enabled;
+	unsigned int high_temp_enabled;
+	int irq;
+	void __iomem *base;
+	int t0, fmt0, ramp_coeff;
+};
+
+static int stm_enable_irq(struct stm_thermal_sensor *sensor)
+{
+	u32 value;
+
+	dev_dbg(sensor->dev, "low:%d high:%d\n", sensor->low_temp_enabled,
+		sensor->high_temp_enabled);
+
+	/* Disable IT generation for low and high thresholds */
+	value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET);
+	value &= ~(LOW_THRESHOLD | HIGH_THRESHOLD);
+
+	if (sensor->low_temp_enabled)
+		value |= HIGH_THRESHOLD;
+
+	if (sensor->high_temp_enabled)
+		value |= LOW_THRESHOLD;
+
+	/* Enable interrupts */
+	writel_relaxed(value, sensor->base + DTS_ITENR_OFFSET);
+
+	return 0;
+}
+
+static irqreturn_t stm_thermal_irq_handler(int irq, void *sdata)
+{
+	struct stm_thermal_sensor *sensor = sdata;
+
+	dev_dbg(sensor->dev, "sr:%d\n",
+		readl_relaxed(sensor->base + DTS_SR_OFFSET));
+
+	thermal_zone_device_update(sensor->th_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	stm_enable_irq(sensor);
+
+	/* Acknoledge all DTS irqs */
+	writel_relaxed(ICIFR_MASK, sensor->base + DTS_ICIFR_OFFSET);
+
+	return IRQ_HANDLED;
+}
+
+static int stm_sensor_power_on(struct stm_thermal_sensor *sensor)
+{
+	int ret;
+	u32 value;
+
+	/* Enable sensor */
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+	value |= TS1_EN;
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	/*
+	 * The DTS block can be enabled by setting TSx_EN bit in
+	 * DTS_CFGRx register. It requires a startup time of
+	 * 40μs. Use 5 ms as arbitrary timeout.
+	 */
+	ret = readl_poll_timeout(sensor->base + DTS_SR_OFFSET,
+				 value, (value & TS_RDY),
+				 STARTUP_TIME, POLL_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Start continuous measuring */
+	value = readl_relaxed(sensor->base +
+			      DTS_CFGR1_OFFSET);
+	value |= TS1_START;
+	writel_relaxed(value, sensor->base +
+		       DTS_CFGR1_OFFSET);
+
+	sensor->mode = THERMAL_DEVICE_ENABLED;
+
+	return 0;
+}
+
+static int stm_sensor_power_off(struct stm_thermal_sensor *sensor)
+{
+	u32 value;
+
+	sensor->mode = THERMAL_DEVICE_DISABLED;
+
+	/* Stop measuring */
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+	value &= ~TS1_START;
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	/* Ensure stop is taken into account */
+	usleep_range(STARTUP_TIME, POLL_TIMEOUT);
+
+	/* Disable sensor */
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+	value &= ~TS1_EN;
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	/* Ensure disable is taken into account */
+	return readl_poll_timeout(sensor->base + DTS_SR_OFFSET, value,
+				  !(value & TS_RDY),
+				  STARTUP_TIME, POLL_TIMEOUT);
+}
+
+static int stm_thermal_calibration(struct stm_thermal_sensor *sensor)
+{
+	u32 value, clk_freq;
+	u32 prescaler;
+
+	/* Figure out prescaler value for PCLK during calibration */
+	clk_freq = clk_get_rate(sensor->clk);
+	if (!clk_freq)
+		return -EINVAL;
+
+	prescaler = 0;
+	clk_freq /= ONE_MHZ;
+	if (clk_freq) {
+		while (prescaler <= clk_freq)
+			prescaler++;
+	}
+
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+
+	/* Clear prescaler */
+	value &= ~HSREF_CLK_DIV_MASK;
+
+	/* Set prescaler. pclk_freq/prescaler < 1MHz */
+	value |= (prescaler << HSREF_CLK_DIV_POS);
+
+	/* Select PCLK as reference clock */
+	value &= ~REFCLK_SEL;
+
+	/* Set maximal sampling time for better precision */
+	value |= TS1_SMP_TIME_MASK;
+
+	/* Measure with calibration */
+	value &= ~CALIBRATION_CONTROL;
+
+	/* select trigger */
+	value &= ~TS1_INTRIG_SEL_MASK;
+	value |= NO_HW_TRIG;
+
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	return 0;
+}
+
+/* Fill in DTS structure with factory sensor values */
+static int stm_thermal_read_factory_settings(struct stm_thermal_sensor *sensor)
+{
+	/* Retrieve engineering calibration temperature */
+	sensor->t0 = readl_relaxed(sensor->base + DTS_T0VALR1_OFFSET) &
+					TS1_T0_MASK;
+	if (!sensor->t0)
+		sensor->t0 = TS1_T0_VAL0;
+	else
+		sensor->t0 = TS1_T0_VAL1;
+
+	/* Retrieve fmt0 and put it on Hz */
+	sensor->fmt0 = ADJUST * (readl_relaxed(sensor->base +
+				 DTS_T0VALR1_OFFSET) & TS1_FMT0_MASK);
+
+	/* Retrieve ramp coefficient */
+	sensor->ramp_coeff = readl_relaxed(sensor->base + DTS_RAMPVALR_OFFSET) &
+					   TS1_RAMP_COEFF_MASK;
+
+	if (!sensor->fmt0 || !sensor->ramp_coeff) {
+		dev_err(sensor->dev, "%s: wrong setting\n", __func__);
+		return -EINVAL;
+	}
+
+	dev_dbg(sensor->dev, "%s: T0 = %doC, FMT0 = %dHz, RAMP_COEFF = %dHz/oC",
+		__func__, sensor->t0, sensor->fmt0, sensor->ramp_coeff);
+
+	return 0;
+}
+
+static int stm_thermal_calculate_threshold(struct stm_thermal_sensor *sensor,
+					   int temp, u32 *th)
+{
+	int freqM;
+
+	/* Figure out the CLK_PTAT frequency for a given temperature */
+	freqM = ((temp - sensor->t0) * sensor->ramp_coeff) / 1000 +
+		sensor->fmt0;
+
+	/* Figure out the threshold sample number */
+	*th = clk_get_rate(sensor->clk) * SAMPLING_TIME / freqM;
+	if (!*th)
+		return -EINVAL;
+
+	dev_dbg(sensor->dev, "freqM=%d Hz, threshold=0x%x", freqM, *th);
+
+	return 0;
+}
+
+/* Disable temperature interrupt */
+static int stm_disable_irq(struct stm_thermal_sensor *sensor)
+{
+	u32 value;
+
+	/* Disable IT generation */
+	value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET);
+	value &= ~ITENR_MASK;
+	writel_relaxed(value, sensor->base + DTS_ITENR_OFFSET);
+
+	return 0;
+}
+
+static int stm_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct stm_thermal_sensor *sensor = tz->devdata;
+	u32 itr1, th;
+	int ret;
+
+	dev_dbg(sensor->dev, "set trips %d <--> %d\n", low, high);
+
+	/* Erase threshold content */
+	itr1 = readl_relaxed(sensor->base + DTS_ITR1_OFFSET);
+	itr1 &= ~(TS1_LITTHD_MASK | TS1_HITTHD_MASK);
+
+	/*
+	 * Disable low-temp if "low" is too small. As per thermal framework
+	 * API, we use -INT_MAX rather than INT_MIN.
+	 */
+
+	if (low > -INT_MAX) {
+		sensor->low_temp_enabled = 1;
+		/* add 0.5 of hysteresis due to measurement error */
+		ret = stm_thermal_calculate_threshold(sensor, low - 500, &th);
+		if (ret)
+			return ret;
+
+		itr1 |= (TS1_HITTHD_MASK  & (th << TS1_HITTHD_POS));
+	} else {
+		sensor->low_temp_enabled = 0;
+	}
+
+	/* Disable high-temp if "high" is too big. */
+	if (high < INT_MAX) {
+		sensor->high_temp_enabled = 1;
+		ret = stm_thermal_calculate_threshold(sensor, high, &th);
+		if (ret)
+			return ret;
+
+		itr1 |= (TS1_LITTHD_MASK  & (th << TS1_LITTHD_POS));
+	} else {
+		sensor->high_temp_enabled = 0;
+	}
+
+	/* Write new threshod values*/
+	writel_relaxed(itr1, sensor->base + DTS_ITR1_OFFSET);
+
+	return 0;
+}
+
+/* Callback to get temperature from HW */
+static int stm_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct stm_thermal_sensor *sensor = tz->devdata;
+	u32 periods;
+	int freqM, ret;
+
+	if (sensor->mode != THERMAL_DEVICE_ENABLED)
+		return -EAGAIN;
+
+	/* Retrieve the number of periods sampled */
+	ret = readl_relaxed_poll_timeout(sensor->base + DTS_DR_OFFSET, periods,
+					 (periods & TS1_MFREQ_MASK),
+					 STARTUP_TIME, POLL_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Figure out the CLK_PTAT frequency */
+	freqM = (clk_get_rate(sensor->clk) * SAMPLING_TIME) / periods;
+	if (!freqM)
+		return -EINVAL;
+
+	/* Figure out the temperature in mili celsius */
+	*temp = (freqM - sensor->fmt0) * 1000 / sensor->ramp_coeff + sensor->t0;
+
+	return 0;
+}
+
+/* Registers DTS irq to be visible by GIC */
+static int stm_register_irq(struct stm_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	int ret;
+
+	sensor->irq = platform_get_irq(pdev, 0);
+	if (sensor->irq < 0)
+		return sensor->irq;
+
+	ret = devm_request_threaded_irq(dev, sensor->irq,
+					NULL,
+					stm_thermal_irq_handler,
+					IRQF_ONESHOT,
+					dev->driver->name, sensor);
+	if (ret) {
+		dev_err(dev, "%s: Failed to register IRQ %d\n", __func__,
+			sensor->irq);
+		return ret;
+	}
+
+	dev_dbg(dev, "%s: thermal IRQ registered", __func__);
+
+	return 0;
+}
+
+static int stm_thermal_sensor_off(struct stm_thermal_sensor *sensor)
+{
+	int ret;
+
+	stm_disable_irq(sensor);
+
+	ret = stm_sensor_power_off(sensor);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(sensor->clk);
+
+	return 0;
+}
+
+static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
+{
+	int ret;
+
+	ret = clk_prepare_enable(sensor->clk);
+	if (ret)
+		return ret;
+
+	ret = stm_thermal_read_factory_settings(sensor);
+	if (ret)
+		goto thermal_unprepare;
+
+	ret = stm_thermal_calibration(sensor);
+	if (ret)
+		goto thermal_unprepare;
+
+	return 0;
+
+thermal_unprepare:
+	clk_disable_unprepare(sensor->clk);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm_thermal_suspend(struct device *dev)
+{
+	struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	return stm_thermal_sensor_off(sensor);
+}
+
+static int stm_thermal_resume(struct device *dev)
+{
+	int ret;
+	struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	ret = stm_thermal_prepare(sensor);
+	if (ret)
+		return ret;
+
+	ret = stm_sensor_power_on(sensor);
+	if (ret)
+		return ret;
+
+	thermal_zone_device_update(sensor->th_dev, THERMAL_EVENT_UNSPECIFIED);
+	stm_enable_irq(sensor);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops,
+			 stm_thermal_suspend, stm_thermal_resume);
+
+static const struct thermal_zone_device_ops stm_tz_ops = {
+	.get_temp	= stm_thermal_get_temp,
+	.set_trips	= stm_thermal_set_trips,
+};
+
+static const struct of_device_id stm_thermal_of_match[] = {
+		{ .compatible = "st,stm32-thermal"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, stm_thermal_of_match);
+
+static int stm_thermal_probe(struct platform_device *pdev)
+{
+	struct stm_thermal_sensor *sensor;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "%s: device tree node not found\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, sensor);
+
+	sensor->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* Populate sensor */
+	sensor->base = base;
+
+	sensor->clk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(sensor->clk)) {
+		dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",
+			__func__);
+		return PTR_ERR(sensor->clk);
+	}
+
+	stm_disable_irq(sensor);
+
+	/* Clear irq flags */
+	writel_relaxed(ICIFR_MASK, sensor->base + DTS_ICIFR_OFFSET);
+
+	/* Configure and enable HW sensor */
+	ret = stm_thermal_prepare(sensor);
+	if (ret) {
+		dev_err(&pdev->dev, "Error prepare sensor: %d\n", ret);
+		return ret;
+	}
+
+	ret = stm_sensor_power_on(sensor);
+	if (ret) {
+		dev_err(&pdev->dev, "Error power on sensor: %d\n", ret);
+		return ret;
+	}
+
+	sensor->th_dev = devm_thermal_of_zone_register(&pdev->dev, 0,
+						       sensor,
+						       &stm_tz_ops);
+
+	if (IS_ERR(sensor->th_dev)) {
+		dev_err(&pdev->dev, "%s: thermal zone sensor registering KO\n",
+			__func__);
+		ret = PTR_ERR(sensor->th_dev);
+		return ret;
+	}
+
+	/* Register IRQ into GIC */
+	ret = stm_register_irq(sensor);
+	if (ret)
+		goto err_tz;
+
+	stm_enable_irq(sensor);
+
+	/*
+	 * Thermal_zone doesn't enable hwmon as default,
+	 * enable it here
+	 */
+	sensor->th_dev->tzp->no_hwmon = false;
+	ret = thermal_add_hwmon_sysfs(sensor->th_dev);
+	if (ret)
+		goto err_tz;
+
+	dev_info(&pdev->dev, "%s: Driver initialized successfully\n",
+		 __func__);
+
+	return 0;
+
+err_tz:
+	return ret;
+}
+
+static int stm_thermal_remove(struct platform_device *pdev)
+{
+	struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+	stm_thermal_sensor_off(sensor);
+	thermal_remove_hwmon_sysfs(sensor->th_dev);
+
+	return 0;
+}
+
+static struct platform_driver stm_thermal_driver = {
+	.driver = {
+		.name	= "stm_thermal",
+		.pm     = &stm_thermal_pm_ops,
+		.of_match_table = stm_thermal_of_match,
+	},
+	.probe		= stm_thermal_probe,
+	.remove		= stm_thermal_remove,
+};
+module_platform_driver(stm_thermal_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics STM32 Thermal Sensor Driver");
+MODULE_AUTHOR("David Hernandez Sanchez <david.hernandezsanchez@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stm_thermal");
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
new file mode 100644
index 000000000..80614b6ad
--- /dev/null
+++ b/drivers/thermal/sun8i_thermal.c
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Thermal sensor driver for Allwinner SOC
+ * Copyright (C) 2019 Yangtao Li
+ *
+ * Based on the work of Icenowy Zheng <icenowy@aosc.io>
+ * Based on the work of Ondrej Jirman <megous@megous.com>
+ * Based on the work of Josef Gajdusek <atx@atx.name>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_hwmon.h"
+
+#define MAX_SENSOR_NUM	4
+
+#define FT_TEMP_MASK				GENMASK(11, 0)
+#define TEMP_CALIB_MASK				GENMASK(11, 0)
+#define CALIBRATE_DEFAULT			0x800
+
+#define SUN8I_THS_CTRL0				0x00
+#define SUN8I_THS_CTRL2				0x40
+#define SUN8I_THS_IC				0x44
+#define SUN8I_THS_IS				0x48
+#define SUN8I_THS_MFC				0x70
+#define SUN8I_THS_TEMP_CALIB			0x74
+#define SUN8I_THS_TEMP_DATA			0x80
+
+#define SUN50I_THS_CTRL0			0x00
+#define SUN50I_H6_THS_ENABLE			0x04
+#define SUN50I_H6_THS_PC			0x08
+#define SUN50I_H6_THS_DIC			0x10
+#define SUN50I_H6_THS_DIS			0x20
+#define SUN50I_H6_THS_MFC			0x30
+#define SUN50I_H6_THS_TEMP_CALIB		0xa0
+#define SUN50I_H6_THS_TEMP_DATA			0xc0
+
+#define SUN8I_THS_CTRL0_T_ACQ0(x)		(GENMASK(15, 0) & (x))
+#define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
+#define SUN8I_THS_DATA_IRQ_STS(x)		BIT(x + 8)
+
+#define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
+#define SUN50I_THS_FILTER_EN			BIT(2)
+#define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
+#define SUN50I_H6_THS_PC_TEMP_PERIOD(x)		((GENMASK(19, 0) & (x)) << 12)
+#define SUN50I_H6_THS_DATA_IRQ_STS(x)		BIT(x)
+
+/* millidegree celsius */
+
+struct tsensor {
+	struct ths_device		*tmdev;
+	struct thermal_zone_device	*tzd;
+	int				id;
+};
+
+struct ths_thermal_chip {
+	bool            has_mod_clk;
+	bool            has_bus_clk_reset;
+	int		sensor_num;
+	int		offset;
+	int		scale;
+	int		ft_deviation;
+	int		temp_data_base;
+	int		(*calibrate)(struct ths_device *tmdev,
+				     u16 *caldata, int callen);
+	int		(*init)(struct ths_device *tmdev);
+	unsigned long	(*irq_ack)(struct ths_device *tmdev);
+	int		(*calc_temp)(struct ths_device *tmdev,
+				     int id, int reg);
+};
+
+struct ths_device {
+	const struct ths_thermal_chip		*chip;
+	struct device				*dev;
+	struct regmap				*regmap;
+	struct reset_control			*reset;
+	struct clk				*bus_clk;
+	struct clk                              *mod_clk;
+	struct tsensor				sensor[MAX_SENSOR_NUM];
+};
+
+/* Temp Unit: millidegree Celsius */
+static int sun8i_ths_calc_temp(struct ths_device *tmdev,
+			       int id, int reg)
+{
+	return tmdev->chip->offset - (reg * tmdev->chip->scale / 10);
+}
+
+static int sun50i_h5_calc_temp(struct ths_device *tmdev,
+			       int id, int reg)
+{
+	if (reg >= 0x500)
+		return -1191 * reg / 10 + 223000;
+	else if (!id)
+		return -1452 * reg / 10 + 259000;
+	else
+		return -1590 * reg / 10 + 276000;
+}
+
+static int sun8i_ths_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct tsensor *s = tz->devdata;
+	struct ths_device *tmdev = s->tmdev;
+	int val = 0;
+
+	regmap_read(tmdev->regmap, tmdev->chip->temp_data_base +
+		    0x4 * s->id, &val);
+
+	/* ths have no data yet */
+	if (!val)
+		return -EAGAIN;
+
+	*temp = tmdev->chip->calc_temp(tmdev, s->id, val);
+	/*
+	 * According to the original sdk, there are some platforms(rarely)
+	 * that add a fixed offset value after calculating the temperature
+	 * value. We can't simply put it on the formula for calculating the
+	 * temperature above, because the formula for calculating the
+	 * temperature above is also used when the sensor is calibrated. If
+	 * do this, the correct calibration formula is hard to know.
+	 */
+	*temp += tmdev->chip->ft_deviation;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops ths_ops = {
+	.get_temp = sun8i_ths_get_temp,
+};
+
+static const struct regmap_config config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+	.max_register = 0xfc,
+};
+
+static unsigned long sun8i_h3_irq_ack(struct ths_device *tmdev)
+{
+	unsigned long irq_bitmap = 0;
+	int i, state;
+
+	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
+			regmap_write(tmdev->regmap, SUN8I_THS_IS,
+				     SUN8I_THS_DATA_IRQ_STS(i));
+			bitmap_set(&irq_bitmap, i, 1);
+		}
+	}
+
+	return irq_bitmap;
+}
+
+static unsigned long sun50i_h6_irq_ack(struct ths_device *tmdev)
+{
+	unsigned long irq_bitmap = 0;
+	int i, state;
+
+	regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
+			regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
+				     SUN50I_H6_THS_DATA_IRQ_STS(i));
+			bitmap_set(&irq_bitmap, i, 1);
+		}
+	}
+
+	return irq_bitmap;
+}
+
+static irqreturn_t sun8i_irq_thread(int irq, void *data)
+{
+	struct ths_device *tmdev = data;
+	unsigned long irq_bitmap = tmdev->chip->irq_ack(tmdev);
+	int i;
+
+	for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
+		thermal_zone_device_update(tmdev->sensor[i].tzd,
+					   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
+				  u16 *caldata, int callen)
+{
+	int i;
+
+	if (!caldata[0] || callen < 2 * tmdev->chip->sensor_num)
+		return -EINVAL;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		int offset = (i % 2) << 4;
+
+		regmap_update_bits(tmdev->regmap,
+				   SUN8I_THS_TEMP_CALIB + (4 * (i >> 1)),
+				   0xfff << offset,
+				   caldata[i] << offset);
+	}
+
+	return 0;
+}
+
+static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
+				   u16 *caldata, int callen)
+{
+	struct device *dev = tmdev->dev;
+	int i, ft_temp;
+
+	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+		return -EINVAL;
+
+	/*
+	 * efuse layout:
+	 *
+	 *	0   11  16	 32
+	 *	+-------+-------+-------+
+	 *	|temp|  |sensor0|sensor1|
+	 *	+-------+-------+-------+
+	 *
+	 * The calibration data on the H6 is the ambient temperature and
+	 * sensor values that are filled during the factory test stage.
+	 *
+	 * The unit of stored FT temperature is 0.1 degree celsius.
+	 *
+	 * We need to calculate a delta between measured and caluclated
+	 * register values and this will become a calibration offset.
+	 */
+	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+		int cdata, offset;
+		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+
+		/*
+		 * Calibration data is CALIBRATE_DEFAULT - (calculated
+		 * temperature from sensor reading at factory temperature
+		 * minus actual factory temperature) * 14.88 (scale from
+		 * temperature to register values)
+		 */
+		cdata = CALIBRATE_DEFAULT -
+			((sensor_temp - ft_temp) * 10 / tmdev->chip->scale);
+		if (cdata & ~TEMP_CALIB_MASK) {
+			/*
+			 * Calibration value more than 12-bit, but calibration
+			 * register is 12-bit. In this case, ths hardware can
+			 * still work without calibration, although the data
+			 * won't be so accurate.
+			 */
+			dev_warn(dev, "sensor%d is not calibrated.\n", i);
+			continue;
+		}
+
+		offset = (i % 2) * 16;
+		regmap_update_bits(tmdev->regmap,
+				   SUN50I_H6_THS_TEMP_CALIB + (i / 2 * 4),
+				   0xfff << offset,
+				   cdata << offset);
+	}
+
+	return 0;
+}
+
+static int sun8i_ths_calibrate(struct ths_device *tmdev)
+{
+	struct nvmem_cell *calcell;
+	struct device *dev = tmdev->dev;
+	u16 *caldata;
+	size_t callen;
+	int ret = 0;
+
+	calcell = devm_nvmem_cell_get(dev, "calibration");
+	if (IS_ERR(calcell)) {
+		if (PTR_ERR(calcell) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		/*
+		 * Even if the external calibration data stored in sid is
+		 * not accessible, the THS hardware can still work, although
+		 * the data won't be so accurate.
+		 *
+		 * The default value of calibration register is 0x800 for
+		 * every sensor, and the calibration value is usually 0x7xx
+		 * or 0x8xx, so they won't be away from the default value
+		 * for a lot.
+		 *
+		 * So here we do not return error if the calibration data is
+		 * not available, except the probe needs deferring.
+		 */
+		goto out;
+	}
+
+	caldata = nvmem_cell_read(calcell, &callen);
+	if (IS_ERR(caldata)) {
+		ret = PTR_ERR(caldata);
+		goto out;
+	}
+
+	tmdev->chip->calibrate(tmdev, caldata, callen);
+
+	kfree(caldata);
+out:
+	return ret;
+}
+
+static void sun8i_ths_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
+static int sun8i_ths_resource_init(struct ths_device *tmdev)
+{
+	struct device *dev = tmdev->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	void __iomem *base;
+	int ret;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	tmdev->regmap = devm_regmap_init_mmio(dev, base, &config);
+	if (IS_ERR(tmdev->regmap))
+		return PTR_ERR(tmdev->regmap);
+
+	if (tmdev->chip->has_bus_clk_reset) {
+		tmdev->reset = devm_reset_control_get(dev, NULL);
+		if (IS_ERR(tmdev->reset))
+			return PTR_ERR(tmdev->reset);
+
+		ret = reset_control_deassert(tmdev->reset);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, sun8i_ths_reset_control_assert,
+					       tmdev->reset);
+		if (ret)
+			return ret;
+
+		tmdev->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus");
+		if (IS_ERR(tmdev->bus_clk))
+			return PTR_ERR(tmdev->bus_clk);
+	}
+
+	if (tmdev->chip->has_mod_clk) {
+		tmdev->mod_clk = devm_clk_get_enabled(&pdev->dev, "mod");
+		if (IS_ERR(tmdev->mod_clk))
+			return PTR_ERR(tmdev->mod_clk);
+	}
+
+	ret = clk_set_rate(tmdev->mod_clk, 24000000);
+	if (ret)
+		return ret;
+
+	ret = sun8i_ths_calibrate(tmdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int sun8i_h3_thermal_init(struct ths_device *tmdev)
+{
+	int val;
+
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN8I_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * clkin = 24MHz
+	 * filter_samples = 4
+	 * period = 0.25s
+	 *
+	 * x = period * clkin / 4096 / filter_samples - 1
+	 *   = 365
+	 */
+	val = GENMASK(7 + tmdev->chip->sensor_num, 8);
+	regmap_write(tmdev->regmap, SUN8I_THS_IC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(365) | val);
+	/*
+	 * T_acq = 20us
+	 * clkin = 24MHz
+	 *
+	 * x = T_acq * clkin - 1
+	 *   = 479
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
+		     SUN8I_THS_CTRL0_T_ACQ0(479));
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
+		     SUN8I_THS_CTRL2_T_ACQ1(479) | val);
+
+	return 0;
+}
+
+/*
+ * Without this undocumented value, the returned temperatures would
+ * be higher than real ones by about 20C.
+ */
+#define SUN50I_H6_CTRL0_UNK 0x0000002f
+
+static int sun50i_h6_thermal_init(struct ths_device *tmdev)
+{
+	int val;
+
+	/*
+	 * T_acq = 20us
+	 * clkin = 24MHz
+	 *
+	 * x = T_acq * clkin - 1
+	 *   = 479
+	 */
+	regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
+		     SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * clkin = 24MHz
+	 * filter_samples = 4
+	 * period = 0.25s
+	 *
+	 * x = period * clkin / 4096 / filter_samples - 1
+	 *   = 365
+	 */
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_PC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(365));
+	/* enable sensor */
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val);
+	/* thermal data interrupt enable */
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val);
+
+	return 0;
+}
+
+static int sun8i_ths_register(struct ths_device *tmdev)
+{
+	int i;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		tmdev->sensor[i].tmdev = tmdev;
+		tmdev->sensor[i].id = i;
+		tmdev->sensor[i].tzd =
+			devm_thermal_of_zone_register(tmdev->dev,
+						      i,
+						      &tmdev->sensor[i],
+						      &ths_ops);
+		if (IS_ERR(tmdev->sensor[i].tzd))
+			return PTR_ERR(tmdev->sensor[i].tzd);
+
+		if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
+			dev_warn(tmdev->dev,
+				 "Failed to add hwmon sysfs attributes\n");
+	}
+
+	return 0;
+}
+
+static int sun8i_ths_probe(struct platform_device *pdev)
+{
+	struct ths_device *tmdev;
+	struct device *dev = &pdev->dev;
+	int ret, irq;
+
+	tmdev = devm_kzalloc(dev, sizeof(*tmdev), GFP_KERNEL);
+	if (!tmdev)
+		return -ENOMEM;
+
+	tmdev->dev = dev;
+	tmdev->chip = of_device_get_match_data(&pdev->dev);
+	if (!tmdev->chip)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, tmdev);
+
+	ret = sun8i_ths_resource_init(tmdev);
+	if (ret)
+		return ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = tmdev->chip->init(tmdev);
+	if (ret)
+		return ret;
+
+	ret = sun8i_ths_register(tmdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Avoid entering the interrupt handler, the thermal device is not
+	 * registered yet, we deffer the registration of the interrupt to
+	 * the end.
+	 */
+	ret = devm_request_threaded_irq(dev, irq, NULL,
+					sun8i_irq_thread,
+					IRQF_ONESHOT, "ths", tmdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct ths_thermal_chip sun8i_a83t_ths = {
+	.sensor_num = 3,
+	.scale = 705,
+	.offset = 191668,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun8i_h3_ths = {
+	.sensor_num = 1,
+	.scale = 1211,
+	.offset = 217000,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun8i_r40_ths = {
+	.sensor_num = 2,
+	.offset = 251086,
+	.scale = 1130,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_a64_ths = {
+	.sensor_num = 3,
+	.offset = 260890,
+	.scale = 1170,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_a100_ths = {
+	.sensor_num = 3,
+	.has_bus_clk_reset = true,
+	.ft_deviation = 8000,
+	.offset = 187744,
+	.scale = 672,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_h5_ths = {
+	.sensor_num = 2,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun50i_h5_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_h6_ths = {
+	.sensor_num = 2,
+	.has_bus_clk_reset = true,
+	.ft_deviation = 7000,
+	.offset = 187744,
+	.scale = 672,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct of_device_id of_ths_match[] = {
+	{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
+	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
+	{ .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
+	{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+	{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
+	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
+	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_ths_match);
+
+static struct platform_driver ths_driver = {
+	.probe = sun8i_ths_probe,
+	.driver = {
+		.name = "sun8i-thermal",
+		.of_match_table = of_ths_match,
+	},
+};
+module_platform_driver(ths_driver);
+
+MODULE_DESCRIPTION("Thermal sensor driver for Allwinner SOC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/Kconfig b/drivers/thermal/tegra/Kconfig
new file mode 100644
index 000000000..cfa41d87a
--- /dev/null
+++ b/drivers/thermal/tegra/Kconfig
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "NVIDIA Tegra thermal drivers"
+depends on ARCH_TEGRA || COMPILE_TEST
+
+config TEGRA_SOCTHERM
+	tristate "Tegra SOCTHERM thermal management"
+	help
+	  Enable this option for integrated thermal management support on NVIDIA
+	  Tegra systems-on-chip. The driver supports four thermal zones
+	  (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
+	  zones to manage temperatures. This option is also required for the
+	  emergency thermal reset (thermtrip) feature to function.
+
+config TEGRA_BPMP_THERMAL
+	tristate "Tegra BPMP thermal sensing"
+	depends on TEGRA_BPMP || COMPILE_TEST
+	help
+	  Enable this option for support for sensing system temperature of NVIDIA
+	  Tegra systems-on-chip with the BPMP coprocessor (Tegra186).
+
+config TEGRA30_TSENSOR
+	tristate "Tegra30 Thermal Sensor"
+	depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
+	help
+	  Enable this option to support thermal management of NVIDIA Tegra30
+	  system-on-chip.
+
+endmenu
diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
new file mode 100644
index 000000000..eb27d194c
--- /dev/null
+++ b/drivers/thermal/tegra/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_TEGRA_SOCTHERM)		+= tegra-soctherm.o
+obj-$(CONFIG_TEGRA_BPMP_THERMAL)	+= tegra-bpmp-thermal.o
+obj-$(CONFIG_TEGRA30_TSENSOR)		+= tegra30-tsensor.o
+
+tegra-soctherm-y				:= soctherm.o soctherm-fuse.o
+tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC)	+= tegra124-soctherm.o
+tegra-soctherm-$(CONFIG_ARCH_TEGRA_132_SOC)	+= tegra132-soctherm.o
+tegra-soctherm-$(CONFIG_ARCH_TEGRA_210_SOC)	+= tegra210-soctherm.o
diff --git a/drivers/thermal/tegra/soctherm-fuse.c b/drivers/thermal/tegra/soctherm-fuse.c
new file mode 100644
index 000000000..190f95280
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm-fuse.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/tegra/fuse.h>
+
+#include "soctherm.h"
+
+#define NOMINAL_CALIB_FT			105
+#define NOMINAL_CALIB_CP			25
+
+#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK	0x1fff
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK	(0x1fff << 13)
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT	13
+
+#define FUSE_TSENSOR_COMMON			0x180
+
+/*
+ * Tegra210: Layout of bits in FUSE_TSENSOR_COMMON:
+ *    3                   2                   1                   0
+ *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |       BASE_FT       |      BASE_CP      | SHFT_FT | SHIFT_CP  |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Tegra12x, etc:
+ * In chips prior to Tegra210, this fuse was incorrectly sized as 26 bits,
+ * and didn't hold SHIFT_CP in [31:26]. Therefore these missing six bits
+ * were obtained via the FUSE_SPARE_REALIGNMENT_REG register [5:0].
+ *
+ * FUSE_TSENSOR_COMMON:
+ *    3                   2                   1                   0
+ *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |-----------| SHFT_FT |       BASE_FT       |      BASE_CP      |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * FUSE_SPARE_REALIGNMENT_REG:
+ *    3                   2                   1                   0
+ *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |---------------------------------------------------| SHIFT_CP  |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ */
+
+#define CALIB_COEFFICIENT 1000000LL
+
+/**
+ * div64_s64_precise() - wrapper for div64_s64()
+ * @a:  the dividend
+ * @b:  the divisor
+ *
+ * Implements division with fairly accurate rounding instead of truncation by
+ * shifting the dividend to the left by 16 so that the quotient has a
+ * much higher precision.
+ *
+ * Return: the quotient of a / b.
+ */
+static s64 div64_s64_precise(s64 a, s32 b)
+{
+	s64 r, al;
+
+	/* Scale up for increased precision division */
+	al = a << 16;
+
+	r = div64_s64(al * 2 + 1, 2 * b);
+	return r >> 16;
+}
+
+int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
+			    struct tsensor_shared_calib *shared)
+{
+	u32 val;
+	s32 shifted_cp, shifted_ft;
+	int err;
+
+	err = tegra_fuse_readl(FUSE_TSENSOR_COMMON, &val);
+	if (err)
+		return err;
+
+	shared->base_cp = (val & tfuse->fuse_base_cp_mask) >>
+			  tfuse->fuse_base_cp_shift;
+	shared->base_ft = (val & tfuse->fuse_base_ft_mask) >>
+			  tfuse->fuse_base_ft_shift;
+
+	shifted_ft = (val & tfuse->fuse_shift_ft_mask) >>
+		     tfuse->fuse_shift_ft_shift;
+	shifted_ft = sign_extend32(shifted_ft, 4);
+
+	if (tfuse->fuse_spare_realignment) {
+		err = tegra_fuse_readl(tfuse->fuse_spare_realignment, &val);
+		if (err)
+			return err;
+	}
+
+	shifted_cp = sign_extend32(val, 5);
+
+	shared->actual_temp_cp = 2 * NOMINAL_CALIB_CP + shifted_cp;
+	shared->actual_temp_ft = 2 * NOMINAL_CALIB_FT + shifted_ft;
+
+	return 0;
+}
+
+int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
+			     const struct tsensor_shared_calib *shared,
+			     u32 *calibration)
+{
+	const struct tegra_tsensor_group *sensor_group;
+	u32 val, calib;
+	s32 actual_tsensor_ft, actual_tsensor_cp;
+	s32 delta_sens, delta_temp;
+	s32 mult, div;
+	s16 therma, thermb;
+	s64 temp;
+	int err;
+
+	sensor_group = sensor->group;
+
+	err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
+	if (err)
+		return err;
+
+	actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
+	val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK) >>
+	      FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
+	actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
+
+	delta_sens = actual_tsensor_ft - actual_tsensor_cp;
+	delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
+
+	mult = sensor_group->pdiv * sensor->config->tsample_ate;
+	div = sensor->config->tsample * sensor_group->pdiv_ate;
+
+	temp = (s64)delta_temp * (1LL << 13) * mult;
+	therma = div64_s64_precise(temp, (s64)delta_sens * div);
+
+	temp = ((s64)actual_tsensor_ft * shared->actual_temp_cp) -
+		((s64)actual_tsensor_cp * shared->actual_temp_ft);
+	thermb = div64_s64_precise(temp, delta_sens);
+
+	temp = (s64)therma * sensor->fuse_corr_alpha;
+	therma = div64_s64_precise(temp, CALIB_COEFFICIENT);
+
+	temp = (s64)thermb * sensor->fuse_corr_alpha + sensor->fuse_corr_beta;
+	thermb = div64_s64_precise(temp, CALIB_COEFFICIENT);
+
+	calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
+		((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
+
+	*calibration = calib;
+
+	return 0;
+}
+
+MODULE_AUTHOR("Wei Ni <wni@nvidia.com>");
+MODULE_DESCRIPTION("Tegra SOCTHERM fuse management");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
new file mode 100644
index 000000000..1efe470f3
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm.c
@@ -0,0 +1,2293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 - 2018, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/debugfs.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "../thermal_core.h"
+#include "soctherm.h"
+
+#define SENSOR_CONFIG0				0
+#define SENSOR_CONFIG0_STOP			BIT(0)
+#define SENSOR_CONFIG0_CPTR_OVER		BIT(2)
+#define SENSOR_CONFIG0_OVER			BIT(3)
+#define SENSOR_CONFIG0_TCALC_OVER		BIT(4)
+#define SENSOR_CONFIG0_TALL_MASK		(0xfffff << 8)
+#define SENSOR_CONFIG0_TALL_SHIFT		8
+
+#define SENSOR_CONFIG1				4
+#define SENSOR_CONFIG1_TSAMPLE_MASK		0x3ff
+#define SENSOR_CONFIG1_TSAMPLE_SHIFT		0
+#define SENSOR_CONFIG1_TIDDQ_EN_MASK		(0x3f << 15)
+#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT		15
+#define SENSOR_CONFIG1_TEN_COUNT_MASK		(0x3f << 24)
+#define SENSOR_CONFIG1_TEN_COUNT_SHIFT		24
+#define SENSOR_CONFIG1_TEMP_ENABLE		BIT(31)
+
+/*
+ * SENSOR_CONFIG2 is defined in soctherm.h
+ * because, it will be used by tegra_soctherm_fuse.c
+ */
+
+#define SENSOR_STATUS0				0xc
+#define SENSOR_STATUS0_VALID_MASK		BIT(31)
+#define SENSOR_STATUS0_CAPTURE_MASK		0xffff
+
+#define SENSOR_STATUS1				0x10
+#define SENSOR_STATUS1_TEMP_VALID_MASK		BIT(31)
+#define SENSOR_STATUS1_TEMP_MASK		0xffff
+
+#define READBACK_VALUE_MASK			0xff00
+#define READBACK_VALUE_SHIFT			8
+#define READBACK_ADD_HALF			BIT(7)
+#define READBACK_NEGATE				BIT(0)
+
+/*
+ * THERMCTL_LEVEL0_GROUP_CPU is defined in soctherm.h
+ * because it will be used by tegraxxx_soctherm.c
+ */
+#define THERMCTL_LVL0_CPU0_EN_MASK		BIT(8)
+#define THERMCTL_LVL0_CPU0_CPU_THROT_MASK	(0x3 << 5)
+#define THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT	0x1
+#define THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY	0x2
+#define THERMCTL_LVL0_CPU0_GPU_THROT_MASK	(0x3 << 3)
+#define THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT	0x1
+#define THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY	0x2
+#define THERMCTL_LVL0_CPU0_MEM_THROT_MASK	BIT(2)
+#define THERMCTL_LVL0_CPU0_STATUS_MASK		0x3
+
+#define THERMCTL_LVL0_UP_STATS			0x10
+#define THERMCTL_LVL0_DN_STATS			0x14
+
+#define THERMCTL_INTR_STATUS			0x84
+
+#define TH_INTR_MD0_MASK			BIT(25)
+#define TH_INTR_MU0_MASK			BIT(24)
+#define TH_INTR_GD0_MASK			BIT(17)
+#define TH_INTR_GU0_MASK			BIT(16)
+#define TH_INTR_CD0_MASK			BIT(9)
+#define TH_INTR_CU0_MASK			BIT(8)
+#define TH_INTR_PD0_MASK			BIT(1)
+#define TH_INTR_PU0_MASK			BIT(0)
+#define TH_INTR_IGNORE_MASK			0xFCFCFCFC
+
+#define THERMCTL_STATS_CTL			0x94
+#define STATS_CTL_CLR_DN			0x8
+#define STATS_CTL_EN_DN				0x4
+#define STATS_CTL_CLR_UP			0x2
+#define STATS_CTL_EN_UP				0x1
+
+#define OC1_CFG					0x310
+#define OC1_CFG_LONG_LATENCY_MASK		BIT(6)
+#define OC1_CFG_HW_RESTORE_MASK			BIT(5)
+#define OC1_CFG_PWR_GOOD_MASK_MASK		BIT(4)
+#define OC1_CFG_THROTTLE_MODE_MASK		(0x3 << 2)
+#define OC1_CFG_ALARM_POLARITY_MASK		BIT(1)
+#define OC1_CFG_EN_THROTTLE_MASK		BIT(0)
+
+#define OC1_CNT_THRESHOLD			0x314
+#define OC1_THROTTLE_PERIOD			0x318
+#define OC1_ALARM_COUNT				0x31c
+#define OC1_FILTER				0x320
+#define OC1_STATS				0x3a8
+
+#define OC_INTR_STATUS				0x39c
+#define OC_INTR_ENABLE				0x3a0
+#define OC_INTR_DISABLE				0x3a4
+#define OC_STATS_CTL				0x3c4
+#define OC_STATS_CTL_CLR_ALL			0x2
+#define OC_STATS_CTL_EN_ALL			0x1
+
+#define OC_INTR_OC1_MASK			BIT(0)
+#define OC_INTR_OC2_MASK			BIT(1)
+#define OC_INTR_OC3_MASK			BIT(2)
+#define OC_INTR_OC4_MASK			BIT(3)
+#define OC_INTR_OC5_MASK			BIT(4)
+
+#define THROT_GLOBAL_CFG			0x400
+#define THROT_GLOBAL_ENB_MASK			BIT(0)
+
+#define CPU_PSKIP_STATUS			0x418
+#define XPU_PSKIP_STATUS_M_MASK			(0xff << 12)
+#define XPU_PSKIP_STATUS_N_MASK			(0xff << 4)
+#define XPU_PSKIP_STATUS_SW_OVERRIDE_MASK	BIT(1)
+#define XPU_PSKIP_STATUS_ENABLED_MASK		BIT(0)
+
+#define THROT_PRIORITY_LOCK			0x424
+#define THROT_PRIORITY_LOCK_PRIORITY_MASK	0xff
+
+#define THROT_STATUS				0x428
+#define THROT_STATUS_BREACH_MASK		BIT(12)
+#define THROT_STATUS_STATE_MASK			(0xff << 4)
+#define THROT_STATUS_ENABLED_MASK		BIT(0)
+
+#define THROT_PSKIP_CTRL_LITE_CPU		0x430
+#define THROT_PSKIP_CTRL_ENABLE_MASK            BIT(31)
+#define THROT_PSKIP_CTRL_DIVIDEND_MASK          (0xff << 8)
+#define THROT_PSKIP_CTRL_DIVISOR_MASK           0xff
+#define THROT_PSKIP_CTRL_VECT_GPU_MASK          (0x7 << 16)
+#define THROT_PSKIP_CTRL_VECT_CPU_MASK          (0x7 << 8)
+#define THROT_PSKIP_CTRL_VECT2_CPU_MASK         0x7
+
+#define THROT_VECT_NONE				0x0 /* 3'b000 */
+#define THROT_VECT_LOW				0x1 /* 3'b001 */
+#define THROT_VECT_MED				0x3 /* 3'b011 */
+#define THROT_VECT_HIGH				0x7 /* 3'b111 */
+
+#define THROT_PSKIP_RAMP_LITE_CPU		0x434
+#define THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK	BIT(31)
+#define THROT_PSKIP_RAMP_DURATION_MASK		(0xffff << 8)
+#define THROT_PSKIP_RAMP_STEP_MASK		0xff
+
+#define THROT_PRIORITY_LITE			0x444
+#define THROT_PRIORITY_LITE_PRIO_MASK		0xff
+
+#define THROT_DELAY_LITE			0x448
+#define THROT_DELAY_LITE_DELAY_MASK		0xff
+
+/* car register offsets needed for enabling HW throttling */
+#define CAR_SUPER_CCLKG_DIVIDER			0x36c
+#define CDIVG_USE_THERM_CONTROLS_MASK		BIT(30)
+
+/* ccroc register offsets needed for enabling HW throttling for Tegra132 */
+#define CCROC_SUPER_CCLKG_DIVIDER		0x024
+
+#define CCROC_GLOBAL_CFG			0x148
+
+#define CCROC_THROT_PSKIP_RAMP_CPU		0x150
+#define CCROC_THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK	BIT(31)
+#define CCROC_THROT_PSKIP_RAMP_DURATION_MASK	(0xffff << 8)
+#define CCROC_THROT_PSKIP_RAMP_STEP_MASK	0xff
+
+#define CCROC_THROT_PSKIP_CTRL_CPU		0x154
+#define CCROC_THROT_PSKIP_CTRL_ENB_MASK		BIT(31)
+#define CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK	(0xff << 8)
+#define CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK	0xff
+
+/* get val from register(r) mask bits(m) */
+#define REG_GET_MASK(r, m)	(((r) & (m)) >> (ffs(m) - 1))
+/* set val(v) to mask bits(m) of register(r) */
+#define REG_SET_MASK(r, m, v)	(((r) & ~(m)) | \
+				 (((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
+
+/* get dividend from the depth */
+#define THROT_DEPTH_DIVIDEND(depth)	((256 * (100 - (depth)) / 100) - 1)
+
+/* gk20a nv_therm interface N:3 Mapping. Levels defined in tegra124-soctherm.h
+ * level	vector
+ * NONE		3'b000
+ * LOW		3'b001
+ * MED		3'b011
+ * HIGH		3'b111
+ */
+#define THROT_LEVEL_TO_DEPTH(level)	((0x1 << (level)) - 1)
+
+/* get THROT_PSKIP_xxx offset per LIGHT/HEAVY throt and CPU/GPU dev */
+#define THROT_OFFSET			0x30
+#define THROT_PSKIP_CTRL(throt, dev)	(THROT_PSKIP_CTRL_LITE_CPU + \
+					(THROT_OFFSET * throt) + (8 * dev))
+#define THROT_PSKIP_RAMP(throt, dev)	(THROT_PSKIP_RAMP_LITE_CPU + \
+					(THROT_OFFSET * throt) + (8 * dev))
+
+/* get THROT_xxx_CTRL offset per LIGHT/HEAVY throt */
+#define THROT_PRIORITY_CTRL(throt)	(THROT_PRIORITY_LITE + \
+					(THROT_OFFSET * throt))
+#define THROT_DELAY_CTRL(throt)		(THROT_DELAY_LITE + \
+					(THROT_OFFSET * throt))
+
+#define ALARM_OFFSET			0x14
+#define ALARM_CFG(throt)		(OC1_CFG + \
+					(ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_CNT_THRESHOLD(throt)	(OC1_CNT_THRESHOLD + \
+					(ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_THROTTLE_PERIOD(throt)	(OC1_THROTTLE_PERIOD + \
+					(ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_ALARM_COUNT(throt)	(OC1_ALARM_COUNT + \
+					(ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_FILTER(throt)		(OC1_FILTER + \
+					(ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_STATS(throt)		(OC1_STATS + \
+					(4 * (throt - THROTTLE_OC1)))
+
+/* get CCROC_THROT_PSKIP_xxx offset per HIGH/MED/LOW vect*/
+#define CCROC_THROT_OFFSET			0x0c
+#define CCROC_THROT_PSKIP_CTRL_CPU_REG(vect)    (CCROC_THROT_PSKIP_CTRL_CPU + \
+						(CCROC_THROT_OFFSET * vect))
+#define CCROC_THROT_PSKIP_RAMP_CPU_REG(vect)    (CCROC_THROT_PSKIP_RAMP_CPU + \
+						(CCROC_THROT_OFFSET * vect))
+
+/* get THERMCTL_LEVELx offset per CPU/GPU/MEM/TSENSE rg and LEVEL0~3 lv */
+#define THERMCTL_LVL_REGS_SIZE		0x20
+#define THERMCTL_LVL_REG(rg, lv)	((rg) + ((lv) * THERMCTL_LVL_REGS_SIZE))
+
+#define OC_THROTTLE_MODE_DISABLED	0
+#define OC_THROTTLE_MODE_BRIEF		2
+
+static const int min_low_temp = -127000;
+static const int max_high_temp = 127000;
+
+enum soctherm_throttle_id {
+	THROTTLE_LIGHT = 0,
+	THROTTLE_HEAVY,
+	THROTTLE_OC1,
+	THROTTLE_OC2,
+	THROTTLE_OC3,
+	THROTTLE_OC4,
+	THROTTLE_OC5, /* OC5 is reserved */
+	THROTTLE_SIZE,
+};
+
+enum soctherm_oc_irq_id {
+	TEGRA_SOC_OC_IRQ_1,
+	TEGRA_SOC_OC_IRQ_2,
+	TEGRA_SOC_OC_IRQ_3,
+	TEGRA_SOC_OC_IRQ_4,
+	TEGRA_SOC_OC_IRQ_5,
+	TEGRA_SOC_OC_IRQ_MAX,
+};
+
+enum soctherm_throttle_dev_id {
+	THROTTLE_DEV_CPU = 0,
+	THROTTLE_DEV_GPU,
+	THROTTLE_DEV_SIZE,
+};
+
+static const char *const throt_names[] = {
+	[THROTTLE_LIGHT] = "light",
+	[THROTTLE_HEAVY] = "heavy",
+	[THROTTLE_OC1]   = "oc1",
+	[THROTTLE_OC2]   = "oc2",
+	[THROTTLE_OC3]   = "oc3",
+	[THROTTLE_OC4]   = "oc4",
+	[THROTTLE_OC5]   = "oc5",
+};
+
+struct tegra_soctherm;
+struct tegra_thermctl_zone {
+	void __iomem *reg;
+	struct device *dev;
+	struct tegra_soctherm *ts;
+	struct thermal_zone_device *tz;
+	const struct tegra_tsensor_group *sg;
+};
+
+struct soctherm_oc_cfg {
+	u32 active_low;
+	u32 throt_period;
+	u32 alarm_cnt_thresh;
+	u32 alarm_filter;
+	u32 mode;
+	bool intr_en;
+};
+
+struct soctherm_throt_cfg {
+	const char *name;
+	unsigned int id;
+	u8 priority;
+	u8 cpu_throt_level;
+	u32 cpu_throt_depth;
+	u32 gpu_throt_level;
+	struct soctherm_oc_cfg oc_cfg;
+	struct thermal_cooling_device *cdev;
+	bool init;
+};
+
+struct tegra_soctherm {
+	struct reset_control *reset;
+	struct clk *clock_tsensor;
+	struct clk *clock_soctherm;
+	void __iomem *regs;
+	void __iomem *clk_regs;
+	void __iomem *ccroc_regs;
+
+	int thermal_irq;
+	int edp_irq;
+
+	u32 *calib;
+	struct thermal_zone_device **thermctl_tzs;
+	struct tegra_soctherm_soc *soc;
+
+	struct soctherm_throt_cfg throt_cfgs[THROTTLE_SIZE];
+
+	struct dentry *debugfs_dir;
+
+	struct mutex thermctl_lock;
+};
+
+struct soctherm_oc_irq_chip_data {
+	struct mutex		irq_lock; /* serialize OC IRQs */
+	struct irq_chip		irq_chip;
+	struct irq_domain	*domain;
+	int			irq_enable;
+};
+
+static struct soctherm_oc_irq_chip_data soc_irq_cdata;
+
+/**
+ * ccroc_writel() - writes a value to a CCROC register
+ * @ts: pointer to a struct tegra_soctherm
+ * @value: the value to write
+ * @reg: the register offset
+ *
+ * Writes @v to @reg.  No return value.
+ */
+static inline void ccroc_writel(struct tegra_soctherm *ts, u32 value, u32 reg)
+{
+	writel(value, (ts->ccroc_regs + reg));
+}
+
+/**
+ * ccroc_readl() - reads specified register from CCROC IP block
+ * @ts: pointer to a struct tegra_soctherm
+ * @reg: register address to be read
+ *
+ * Return: the value of the register
+ */
+static inline u32 ccroc_readl(struct tegra_soctherm *ts, u32 reg)
+{
+	return readl(ts->ccroc_regs + reg);
+}
+
+static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
+{
+	const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
+	void __iomem *base = tegra->regs + sensor->base;
+	unsigned int val;
+
+	val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
+	writel(val, base + SENSOR_CONFIG0);
+
+	val  = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
+	val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
+	val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
+	val |= SENSOR_CONFIG1_TEMP_ENABLE;
+	writel(val, base + SENSOR_CONFIG1);
+
+	writel(tegra->calib[i], base + SENSOR_CONFIG2);
+}
+
+/*
+ * Translate from soctherm readback format to millicelsius.
+ * The soctherm readback format in bits is as follows:
+ *   TTTTTTTT H______N
+ * where T's contain the temperature in Celsius,
+ * H denotes an addition of 0.5 Celsius and N denotes negation
+ * of the final value.
+ */
+static int translate_temp(u16 val)
+{
+	int t;
+
+	t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
+	if (val & READBACK_ADD_HALF)
+		t += 500;
+	if (val & READBACK_NEGATE)
+		t *= -1;
+
+	return t;
+}
+
+static int tegra_thermctl_get_temp(struct thermal_zone_device *tz, int *out_temp)
+{
+	struct tegra_thermctl_zone *zone = tz->devdata;
+	u32 val;
+
+	val = readl(zone->reg);
+	val = REG_GET_MASK(val, zone->sg->sensor_temp_mask);
+	*out_temp = translate_temp(val);
+
+	return 0;
+}
+
+/**
+ * enforce_temp_range() - check and enforce temperature range [min, max]
+ * @dev: struct device * of the SOC_THERM instance
+ * @trip_temp: the trip temperature to check
+ *
+ * Checks and enforces the permitted temperature range that SOC_THERM
+ * HW can support This is
+ * done while taking care of precision.
+ *
+ * Return: The precision adjusted capped temperature in millicelsius.
+ */
+static int enforce_temp_range(struct device *dev, int trip_temp)
+{
+	int temp;
+
+	temp = clamp_val(trip_temp, min_low_temp, max_high_temp);
+	if (temp != trip_temp)
+		dev_dbg(dev, "soctherm: trip temperature %d forced to %d\n",
+			trip_temp, temp);
+	return temp;
+}
+
+/**
+ * thermtrip_program() - Configures the hardware to shut down the
+ * system if a given sensor group reaches a given temperature
+ * @dev: ptr to the struct device for the SOC_THERM IP block
+ * @sg: pointer to the sensor group to set the thermtrip temperature for
+ * @trip_temp: the temperature in millicelsius to trigger the thermal trip at
+ *
+ * Sets the thermal trip threshold of the given sensor group to be the
+ * @trip_temp.  If this threshold is crossed, the hardware will shut
+ * down.
+ *
+ * Note that, although @trip_temp is specified in millicelsius, the
+ * hardware is programmed in degrees Celsius.
+ *
+ * Return: 0 upon success, or %-EINVAL upon failure.
+ */
+static int thermtrip_program(struct device *dev,
+			     const struct tegra_tsensor_group *sg,
+			     int trip_temp)
+{
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	int temp;
+	u32 r;
+
+	if (!sg || !sg->thermtrip_threshold_mask)
+		return -EINVAL;
+
+	temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
+
+	r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
+	r = REG_SET_MASK(r, sg->thermtrip_threshold_mask, temp);
+	r = REG_SET_MASK(r, sg->thermtrip_enable_mask, 1);
+	r = REG_SET_MASK(r, sg->thermtrip_any_en_mask, 0);
+	writel(r, ts->regs + THERMCTL_THERMTRIP_CTL);
+
+	return 0;
+}
+
+/**
+ * throttrip_program() - Configures the hardware to throttle the
+ * pulse if a given sensor group reaches a given temperature
+ * @dev: ptr to the struct device for the SOC_THERM IP block
+ * @sg: pointer to the sensor group to set the thermtrip temperature for
+ * @stc: pointer to the throttle need to be triggered
+ * @trip_temp: the temperature in millicelsius to trigger the thermal trip at
+ *
+ * Sets the thermal trip threshold and throttle event of the given sensor
+ * group. If this threshold is crossed, the hardware will trigger the
+ * throttle.
+ *
+ * Note that, although @trip_temp is specified in millicelsius, the
+ * hardware is programmed in degrees Celsius.
+ *
+ * Return: 0 upon success, or %-EINVAL upon failure.
+ */
+static int throttrip_program(struct device *dev,
+			     const struct tegra_tsensor_group *sg,
+			     struct soctherm_throt_cfg *stc,
+			     int trip_temp)
+{
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	int temp, cpu_throt, gpu_throt;
+	unsigned int throt;
+	u32 r, reg_off;
+
+	if (!sg || !stc || !stc->init)
+		return -EINVAL;
+
+	temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
+
+	/* Hardcode LIGHT on LEVEL1 and HEAVY on LEVEL2 */
+	throt = stc->id;
+	reg_off = THERMCTL_LVL_REG(sg->thermctl_lvl0_offset, throt + 1);
+
+	if (throt == THROTTLE_LIGHT) {
+		cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT;
+		gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT;
+	} else {
+		cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY;
+		gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY;
+		if (throt != THROTTLE_HEAVY)
+			dev_warn(dev,
+				 "invalid throt id %d - assuming HEAVY",
+				 throt);
+	}
+
+	r = readl(ts->regs + reg_off);
+	r = REG_SET_MASK(r, sg->thermctl_lvl0_up_thresh_mask, temp);
+	r = REG_SET_MASK(r, sg->thermctl_lvl0_dn_thresh_mask, temp);
+	r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_CPU_THROT_MASK, cpu_throt);
+	r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_GPU_THROT_MASK, gpu_throt);
+	r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1);
+	writel(r, ts->regs + reg_off);
+
+	return 0;
+}
+
+static struct soctherm_throt_cfg *
+find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name)
+{
+	unsigned int i;
+
+	for (i = 0; ts->throt_cfgs[i].name; i++)
+		if (!strcmp(ts->throt_cfgs[i].name, name))
+			return &ts->throt_cfgs[i];
+
+	return NULL;
+}
+
+static int tsensor_group_thermtrip_get(struct tegra_soctherm *ts, int id)
+{
+	int i, temp = min_low_temp;
+	struct tsensor_group_thermtrips *tt = ts->soc->thermtrips;
+
+	if (id >= TEGRA124_SOCTHERM_SENSOR_NUM)
+		return temp;
+
+	if (tt) {
+		for (i = 0; i < ts->soc->num_ttgs; i++) {
+			if (tt[i].id == id)
+				return tt[i].temp;
+		}
+	}
+
+	return temp;
+}
+
+static int tegra_thermctl_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
+{
+	struct tegra_thermctl_zone *zone = tz->devdata;
+	struct tegra_soctherm *ts = zone->ts;
+	const struct tegra_tsensor_group *sg = zone->sg;
+	struct device *dev = zone->dev;
+	enum thermal_trip_type type;
+	int ret;
+
+	if (!tz)
+		return -EINVAL;
+
+	ret = tz->ops->get_trip_type(tz, trip, &type);
+	if (ret)
+		return ret;
+
+	if (type == THERMAL_TRIP_CRITICAL) {
+		/*
+		 * If thermtrips property is set in DT,
+		 * doesn't need to program critical type trip to HW,
+		 * if not, program critical trip to HW.
+		 */
+		if (min_low_temp == tsensor_group_thermtrip_get(ts, sg->id))
+			return thermtrip_program(dev, sg, temp);
+		else
+			return 0;
+
+	} else if (type == THERMAL_TRIP_HOT) {
+		int i;
+
+		for (i = 0; i < THROTTLE_SIZE; i++) {
+			struct thermal_cooling_device *cdev;
+			struct soctherm_throt_cfg *stc;
+
+			if (!ts->throt_cfgs[i].init)
+				continue;
+
+			cdev = ts->throt_cfgs[i].cdev;
+			if (get_thermal_instance(tz, cdev, trip))
+				stc = find_throttle_cfg_by_name(ts, cdev->type);
+			else
+				continue;
+
+			return throttrip_program(dev, sg, stc, temp);
+		}
+	}
+
+	return 0;
+}
+
+static void thermal_irq_enable(struct tegra_thermctl_zone *zn)
+{
+	u32 r;
+
+	/* multiple zones could be handling and setting trips at once */
+	mutex_lock(&zn->ts->thermctl_lock);
+	r = readl(zn->ts->regs + THERMCTL_INTR_ENABLE);
+	r = REG_SET_MASK(r, zn->sg->thermctl_isr_mask, TH_INTR_UP_DN_EN);
+	writel(r, zn->ts->regs + THERMCTL_INTR_ENABLE);
+	mutex_unlock(&zn->ts->thermctl_lock);
+}
+
+static void thermal_irq_disable(struct tegra_thermctl_zone *zn)
+{
+	u32 r;
+
+	/* multiple zones could be handling and setting trips at once */
+	mutex_lock(&zn->ts->thermctl_lock);
+	r = readl(zn->ts->regs + THERMCTL_INTR_DISABLE);
+	r = REG_SET_MASK(r, zn->sg->thermctl_isr_mask, 0);
+	writel(r, zn->ts->regs + THERMCTL_INTR_DISABLE);
+	mutex_unlock(&zn->ts->thermctl_lock);
+}
+
+static int tegra_thermctl_set_trips(struct thermal_zone_device *tz, int lo, int hi)
+{
+	struct tegra_thermctl_zone *zone = tz->devdata;
+	u32 r;
+
+	thermal_irq_disable(zone);
+
+	r = readl(zone->ts->regs + zone->sg->thermctl_lvl0_offset);
+	r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 0);
+	writel(r, zone->ts->regs + zone->sg->thermctl_lvl0_offset);
+
+	lo = enforce_temp_range(zone->dev, lo) / zone->ts->soc->thresh_grain;
+	hi = enforce_temp_range(zone->dev, hi) / zone->ts->soc->thresh_grain;
+	dev_dbg(zone->dev, "%s hi:%d, lo:%d\n", __func__, hi, lo);
+
+	r = REG_SET_MASK(r, zone->sg->thermctl_lvl0_up_thresh_mask, hi);
+	r = REG_SET_MASK(r, zone->sg->thermctl_lvl0_dn_thresh_mask, lo);
+	r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1);
+	writel(r, zone->ts->regs + zone->sg->thermctl_lvl0_offset);
+
+	thermal_irq_enable(zone);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops tegra_of_thermal_ops = {
+	.get_temp = tegra_thermctl_get_temp,
+	.set_trip_temp = tegra_thermctl_set_trip_temp,
+	.set_trips = tegra_thermctl_set_trips,
+};
+
+static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
+{
+	int ntrips, i, ret;
+	enum thermal_trip_type type;
+
+	ntrips = of_thermal_get_ntrips(tz);
+	if (ntrips <= 0)
+		return -EINVAL;
+
+	for (i = 0; i < ntrips; i++) {
+		ret = tz->ops->get_trip_type(tz, i, &type);
+		if (ret)
+			return -EINVAL;
+		if (type == THERMAL_TRIP_HOT) {
+			ret = tz->ops->get_trip_temp(tz, i, temp);
+			if (!ret)
+				*trip = i;
+
+			return ret;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * tegra_soctherm_set_hwtrips() - set HW trip point from DT data
+ * @dev: struct device * of the SOC_THERM instance
+ * @sg: pointer to the sensor group to set the thermtrip temperature for
+ * @tz: struct thermal_zone_device *
+ *
+ * Configure the SOC_THERM HW trip points, setting "THERMTRIP"
+ * "THROTTLE" trip points , using "thermtrips", "critical" or "hot"
+ * type trip_temp
+ * from thermal zone.
+ * After they have been configured, THERMTRIP or THROTTLE will take
+ * action when the configured SoC thermal sensor group reaches a
+ * certain temperature.
+ *
+ * Return: 0 upon success, or a negative error code on failure.
+ * "Success" does not mean that trips was enabled; it could also
+ * mean that no node was found in DT.
+ * THERMTRIP has been enabled successfully when a message similar to
+ * this one appears on the serial console:
+ * "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC"
+ * THROTTLE has been enabled successfully when a message similar to
+ * this one appears on the serial console:
+ * ""throttrip: will throttle when sensor group XXX reaches YYYYYY mC"
+ */
+static int tegra_soctherm_set_hwtrips(struct device *dev,
+				      const struct tegra_tsensor_group *sg,
+				      struct thermal_zone_device *tz)
+{
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	struct soctherm_throt_cfg *stc;
+	int i, trip, temperature, ret;
+
+	/* Get thermtrips. If missing, try to get critical trips. */
+	temperature = tsensor_group_thermtrip_get(ts, sg->id);
+	if (min_low_temp == temperature)
+		if (tz->ops->get_crit_temp(tz, &temperature))
+			temperature = max_high_temp;
+
+	ret = thermtrip_program(dev, sg, temperature);
+	if (ret) {
+		dev_err(dev, "thermtrip: %s: error during enable\n", sg->name);
+		return ret;
+	}
+
+	dev_info(dev, "thermtrip: will shut down when %s reaches %d mC\n",
+		 sg->name, temperature);
+
+	ret = get_hot_temp(tz, &trip, &temperature);
+	if (ret) {
+		dev_info(dev, "throttrip: %s: missing hot temperature\n",
+			 sg->name);
+		return 0;
+	}
+
+	for (i = 0; i < THROTTLE_OC1; i++) {
+		struct thermal_cooling_device *cdev;
+
+		if (!ts->throt_cfgs[i].init)
+			continue;
+
+		cdev = ts->throt_cfgs[i].cdev;
+		if (get_thermal_instance(tz, cdev, trip))
+			stc = find_throttle_cfg_by_name(ts, cdev->type);
+		else
+			continue;
+
+		ret = throttrip_program(dev, sg, stc, temperature);
+		if (ret) {
+			dev_err(dev, "throttrip: %s: error during enable\n",
+				sg->name);
+			return ret;
+		}
+
+		dev_info(dev,
+			 "throttrip: will throttle when %s reaches %d mC\n",
+			 sg->name, temperature);
+		break;
+	}
+
+	if (i == THROTTLE_SIZE)
+		dev_info(dev, "throttrip: %s: missing throttle cdev\n",
+			 sg->name);
+
+	return 0;
+}
+
+static irqreturn_t soctherm_thermal_isr(int irq, void *dev_id)
+{
+	struct tegra_soctherm *ts = dev_id;
+	u32 r;
+
+	/* Case for no lock:
+	 * Although interrupts are enabled in set_trips, there is still no need
+	 * to lock here because the interrupts are disabled before programming
+	 * new trip points. Hence there cant be a interrupt on the same sensor.
+	 * An interrupt can however occur on a sensor while trips are being
+	 * programmed on a different one. This beign a LEVEL interrupt won't
+	 * cause a new interrupt but this is taken care of by the re-reading of
+	 * the STATUS register in the thread function.
+	 */
+	r = readl(ts->regs + THERMCTL_INTR_STATUS);
+	writel(r, ts->regs + THERMCTL_INTR_DISABLE);
+
+	return IRQ_WAKE_THREAD;
+}
+
+/**
+ * soctherm_thermal_isr_thread() - Handles a thermal interrupt request
+ * @irq:       The interrupt number being requested; not used
+ * @dev_id:    Opaque pointer to tegra_soctherm;
+ *
+ * Clears the interrupt status register if there are expected
+ * interrupt bits set.
+ * The interrupt(s) are then handled by updating the corresponding
+ * thermal zones.
+ *
+ * An error is logged if any unexpected interrupt bits are set.
+ *
+ * Disabled interrupts are re-enabled.
+ *
+ * Return: %IRQ_HANDLED. Interrupt was handled and no further processing
+ * is needed.
+ */
+static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
+{
+	struct tegra_soctherm *ts = dev_id;
+	struct thermal_zone_device *tz;
+	u32 st, ex = 0, cp = 0, gp = 0, pl = 0, me = 0;
+
+	st = readl(ts->regs + THERMCTL_INTR_STATUS);
+
+	/* deliberately clear expected interrupts handled in SW */
+	cp |= st & TH_INTR_CD0_MASK;
+	cp |= st & TH_INTR_CU0_MASK;
+
+	gp |= st & TH_INTR_GD0_MASK;
+	gp |= st & TH_INTR_GU0_MASK;
+
+	pl |= st & TH_INTR_PD0_MASK;
+	pl |= st & TH_INTR_PU0_MASK;
+
+	me |= st & TH_INTR_MD0_MASK;
+	me |= st & TH_INTR_MU0_MASK;
+
+	ex |= cp | gp | pl | me;
+	if (ex) {
+		writel(ex, ts->regs + THERMCTL_INTR_STATUS);
+		st &= ~ex;
+
+		if (cp) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_CPU];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+
+		if (gp) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_GPU];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+
+		if (pl) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_PLLX];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+
+		if (me) {
+			tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_MEM];
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+	}
+
+	/* deliberately ignore expected interrupts NOT handled in SW */
+	ex |= TH_INTR_IGNORE_MASK;
+	st &= ~ex;
+
+	if (st) {
+		/* Whine about any other unexpected INTR bits still set */
+		pr_err("soctherm: Ignored unexpected INTRs 0x%08x\n", st);
+		writel(st, ts->regs + THERMCTL_INTR_STATUS);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt
+ * @ts:		pointer to a struct tegra_soctherm
+ * @alarm:		The soctherm throttle id
+ * @enable:		Flag indicating enable the soctherm over-current
+ *			interrupt or disable it
+ *
+ * Enables a specific over-current pins @alarm to raise an interrupt if the flag
+ * is set and the alarm corresponds to OC1, OC2, OC3, or OC4.
+ */
+static void soctherm_oc_intr_enable(struct tegra_soctherm *ts,
+				    enum soctherm_throttle_id alarm,
+				    bool enable)
+{
+	u32 r;
+
+	if (!enable)
+		return;
+
+	r = readl(ts->regs + OC_INTR_ENABLE);
+	switch (alarm) {
+	case THROTTLE_OC1:
+		r = REG_SET_MASK(r, OC_INTR_OC1_MASK, 1);
+		break;
+	case THROTTLE_OC2:
+		r = REG_SET_MASK(r, OC_INTR_OC2_MASK, 1);
+		break;
+	case THROTTLE_OC3:
+		r = REG_SET_MASK(r, OC_INTR_OC3_MASK, 1);
+		break;
+	case THROTTLE_OC4:
+		r = REG_SET_MASK(r, OC_INTR_OC4_MASK, 1);
+		break;
+	default:
+		r = 0;
+		break;
+	}
+	writel(r, ts->regs + OC_INTR_ENABLE);
+}
+
+/**
+ * soctherm_handle_alarm() - Handles soctherm alarms
+ * @alarm:		The soctherm throttle id
+ *
+ * "Handles" over-current alarms (OC1, OC2, OC3, and OC4) by printing
+ * a warning or informative message.
+ *
+ * Return: -EINVAL for @alarm = THROTTLE_OC3, otherwise 0 (success).
+ */
+static int soctherm_handle_alarm(enum soctherm_throttle_id alarm)
+{
+	int rv = -EINVAL;
+
+	switch (alarm) {
+	case THROTTLE_OC1:
+		pr_debug("soctherm: Successfully handled OC1 alarm\n");
+		rv = 0;
+		break;
+
+	case THROTTLE_OC2:
+		pr_debug("soctherm: Successfully handled OC2 alarm\n");
+		rv = 0;
+		break;
+
+	case THROTTLE_OC3:
+		pr_debug("soctherm: Successfully handled OC3 alarm\n");
+		rv = 0;
+		break;
+
+	case THROTTLE_OC4:
+		pr_debug("soctherm: Successfully handled OC4 alarm\n");
+		rv = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	if (rv)
+		pr_err("soctherm: ERROR in handling %s alarm\n",
+		       throt_names[alarm]);
+
+	return rv;
+}
+
+/**
+ * soctherm_edp_isr_thread() - log an over-current interrupt request
+ * @irq:	OC irq number. Currently not being used. See description
+ * @arg:	a void pointer for callback, currently not being used
+ *
+ * Over-current events are handled in hardware. This function is called to log
+ * and handle any OC events that happened. Additionally, it checks every
+ * over-current interrupt registers for registers are set but
+ * was not expected (i.e. any discrepancy in interrupt status) by the function,
+ * the discrepancy will logged.
+ *
+ * Return: %IRQ_HANDLED
+ */
+static irqreturn_t soctherm_edp_isr_thread(int irq, void *arg)
+{
+	struct tegra_soctherm *ts = arg;
+	u32 st, ex, oc1, oc2, oc3, oc4;
+
+	st = readl(ts->regs + OC_INTR_STATUS);
+
+	/* deliberately clear expected interrupts handled in SW */
+	oc1 = st & OC_INTR_OC1_MASK;
+	oc2 = st & OC_INTR_OC2_MASK;
+	oc3 = st & OC_INTR_OC3_MASK;
+	oc4 = st & OC_INTR_OC4_MASK;
+	ex = oc1 | oc2 | oc3 | oc4;
+
+	pr_err("soctherm: OC ALARM 0x%08x\n", ex);
+	if (ex) {
+		writel(st, ts->regs + OC_INTR_STATUS);
+		st &= ~ex;
+
+		if (oc1 && !soctherm_handle_alarm(THROTTLE_OC1))
+			soctherm_oc_intr_enable(ts, THROTTLE_OC1, true);
+
+		if (oc2 && !soctherm_handle_alarm(THROTTLE_OC2))
+			soctherm_oc_intr_enable(ts, THROTTLE_OC2, true);
+
+		if (oc3 && !soctherm_handle_alarm(THROTTLE_OC3))
+			soctherm_oc_intr_enable(ts, THROTTLE_OC3, true);
+
+		if (oc4 && !soctherm_handle_alarm(THROTTLE_OC4))
+			soctherm_oc_intr_enable(ts, THROTTLE_OC4, true);
+
+		if (oc1 && soc_irq_cdata.irq_enable & BIT(0))
+			handle_nested_irq(
+				irq_find_mapping(soc_irq_cdata.domain, 0));
+
+		if (oc2 && soc_irq_cdata.irq_enable & BIT(1))
+			handle_nested_irq(
+				irq_find_mapping(soc_irq_cdata.domain, 1));
+
+		if (oc3 && soc_irq_cdata.irq_enable & BIT(2))
+			handle_nested_irq(
+				irq_find_mapping(soc_irq_cdata.domain, 2));
+
+		if (oc4 && soc_irq_cdata.irq_enable & BIT(3))
+			handle_nested_irq(
+				irq_find_mapping(soc_irq_cdata.domain, 3));
+	}
+
+	if (st) {
+		pr_err("soctherm: Ignored unexpected OC ALARM 0x%08x\n", st);
+		writel(st, ts->regs + OC_INTR_STATUS);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * soctherm_edp_isr() - Disables any active interrupts
+ * @irq:	The interrupt request number
+ * @arg:	Opaque pointer to an argument
+ *
+ * Writes to the OC_INTR_DISABLE register the over current interrupt status,
+ * masking any asserted interrupts. Doing this prevents the same interrupts
+ * from triggering this isr repeatedly. The thread woken by this isr will
+ * handle asserted interrupts and subsequently unmask/re-enable them.
+ *
+ * The OC_INTR_DISABLE register indicates which OC interrupts
+ * have been disabled.
+ *
+ * Return: %IRQ_WAKE_THREAD, handler requests to wake the handler thread
+ */
+static irqreturn_t soctherm_edp_isr(int irq, void *arg)
+{
+	struct tegra_soctherm *ts = arg;
+	u32 r;
+
+	if (!ts)
+		return IRQ_NONE;
+
+	r = readl(ts->regs + OC_INTR_STATUS);
+	writel(r, ts->regs + OC_INTR_DISABLE);
+
+	return IRQ_WAKE_THREAD;
+}
+
+/**
+ * soctherm_oc_irq_lock() - locks the over-current interrupt request
+ * @data:	Interrupt request data
+ *
+ * Looks up the chip data from @data and locks the mutex associated with
+ * a particular over-current interrupt request.
+ */
+static void soctherm_oc_irq_lock(struct irq_data *data)
+{
+	struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&d->irq_lock);
+}
+
+/**
+ * soctherm_oc_irq_sync_unlock() - Unlocks the OC interrupt request
+ * @data:		Interrupt request data
+ *
+ * Looks up the interrupt request data @data and unlocks the mutex associated
+ * with a particular over-current interrupt request.
+ */
+static void soctherm_oc_irq_sync_unlock(struct irq_data *data)
+{
+	struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+	mutex_unlock(&d->irq_lock);
+}
+
+/**
+ * soctherm_oc_irq_enable() - Enables the SOC_THERM over-current interrupt queue
+ * @data:       irq_data structure of the chip
+ *
+ * Sets the irq_enable bit of SOC_THERM allowing SOC_THERM
+ * to respond to over-current interrupts.
+ *
+ */
+static void soctherm_oc_irq_enable(struct irq_data *data)
+{
+	struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+	d->irq_enable |= BIT(data->hwirq);
+}
+
+/**
+ * soctherm_oc_irq_disable() - Disables overcurrent interrupt requests
+ * @data:	The interrupt request information
+ *
+ * Clears the interrupt request enable bit of the overcurrent
+ * interrupt request chip data.
+ *
+ * Return: Nothing is returned (void)
+ */
+static void soctherm_oc_irq_disable(struct irq_data *data)
+{
+	struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+	d->irq_enable &= ~BIT(data->hwirq);
+}
+
+static int soctherm_oc_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	return 0;
+}
+
+/**
+ * soctherm_oc_irq_map() - SOC_THERM interrupt request domain mapper
+ * @h:		Interrupt request domain
+ * @virq:	Virtual interrupt request number
+ * @hw:		Hardware interrupt request number
+ *
+ * Mapping callback function for SOC_THERM's irq_domain. When a SOC_THERM
+ * interrupt request is called, the irq_domain takes the request's virtual
+ * request number (much like a virtual memory address) and maps it to a
+ * physical hardware request number.
+ *
+ * When a mapping doesn't already exist for a virtual request number, the
+ * irq_domain calls this function to associate the virtual request number with
+ * a hardware request number.
+ *
+ * Return: 0
+ */
+static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq,
+		irq_hw_number_t hw)
+{
+	struct soctherm_oc_irq_chip_data *data = h->host_data;
+
+	irq_set_chip_data(virq, data);
+	irq_set_chip(virq, &data->irq_chip);
+	irq_set_nested_thread(virq, 1);
+	return 0;
+}
+
+/**
+ * soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts
+ * @d:      Interrupt request domain
+ * @ctrlr:      Controller device tree node
+ * @intspec:    Array of u32s from DTs "interrupt" property
+ * @intsize:    Number of values inside the intspec array
+ * @out_hwirq:  HW IRQ value associated with this interrupt
+ * @out_type:   The IRQ SENSE type for this interrupt.
+ *
+ * This Device Tree IRQ specifier translation function will translate a
+ * specific "interrupt" as defined by 2 DT values where the cell values map
+ * the hwirq number + 1 and linux irq flags. Since the output is the hwirq
+ * number, this function will subtract 1 from the value listed in DT.
+ *
+ * Return: 0
+ */
+static int soctherm_irq_domain_xlate_twocell(struct irq_domain *d,
+	struct device_node *ctrlr, const u32 *intspec, unsigned int intsize,
+	irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+	if (WARN_ON(intsize < 2))
+		return -EINVAL;
+
+	/*
+	 * The HW value is 1 index less than the DT IRQ values.
+	 * i.e. OC4 goes to HW index 3.
+	 */
+	*out_hwirq = intspec[0] - 1;
+	*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+	return 0;
+}
+
+static const struct irq_domain_ops soctherm_oc_domain_ops = {
+	.map	= soctherm_oc_irq_map,
+	.xlate	= soctherm_irq_domain_xlate_twocell,
+};
+
+/**
+ * soctherm_oc_int_init() - Initial enabling of the over
+ * current interrupts
+ * @np:	The devicetree node for soctherm
+ * @num_irqs:	The number of new interrupt requests
+ *
+ * Sets the over current interrupt request chip data
+ *
+ * Return: 0 on success or if overcurrent interrupts are not enabled,
+ * -ENOMEM (out of memory), or irq_base if the function failed to
+ * allocate the irqs
+ */
+static int soctherm_oc_int_init(struct device_node *np, int num_irqs)
+{
+	if (!num_irqs) {
+		pr_info("%s(): OC interrupts are not enabled\n", __func__);
+		return 0;
+	}
+
+	mutex_init(&soc_irq_cdata.irq_lock);
+	soc_irq_cdata.irq_enable = 0;
+
+	soc_irq_cdata.irq_chip.name = "soc_therm_oc";
+	soc_irq_cdata.irq_chip.irq_bus_lock = soctherm_oc_irq_lock;
+	soc_irq_cdata.irq_chip.irq_bus_sync_unlock =
+		soctherm_oc_irq_sync_unlock;
+	soc_irq_cdata.irq_chip.irq_disable = soctherm_oc_irq_disable;
+	soc_irq_cdata.irq_chip.irq_enable = soctherm_oc_irq_enable;
+	soc_irq_cdata.irq_chip.irq_set_type = soctherm_oc_irq_set_type;
+	soc_irq_cdata.irq_chip.irq_set_wake = NULL;
+
+	soc_irq_cdata.domain = irq_domain_add_linear(np, num_irqs,
+						     &soctherm_oc_domain_ops,
+						     &soc_irq_cdata);
+
+	if (!soc_irq_cdata.domain) {
+		pr_err("%s: Failed to create IRQ domain\n", __func__);
+		return -ENOMEM;
+	}
+
+	pr_debug("%s(): OC interrupts enabled successful\n", __func__);
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int regs_show(struct seq_file *s, void *data)
+{
+	struct platform_device *pdev = s->private;
+	struct tegra_soctherm *ts = platform_get_drvdata(pdev);
+	const struct tegra_tsensor *tsensors = ts->soc->tsensors;
+	const struct tegra_tsensor_group **ttgs = ts->soc->ttgs;
+	u32 r, state;
+	int i, level;
+
+	seq_puts(s, "-----TSENSE (convert HW)-----\n");
+
+	for (i = 0; i < ts->soc->num_tsensors; i++) {
+		r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG1);
+		state = REG_GET_MASK(r, SENSOR_CONFIG1_TEMP_ENABLE);
+
+		seq_printf(s, "%s: ", tsensors[i].name);
+		seq_printf(s, "En(%d) ", state);
+
+		if (!state) {
+			seq_puts(s, "\n");
+			continue;
+		}
+
+		state = REG_GET_MASK(r, SENSOR_CONFIG1_TIDDQ_EN_MASK);
+		seq_printf(s, "tiddq(%d) ", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG1_TEN_COUNT_MASK);
+		seq_printf(s, "ten_count(%d) ", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG1_TSAMPLE_MASK);
+		seq_printf(s, "tsample(%d) ", state + 1);
+
+		r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS1);
+		state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_VALID_MASK);
+		seq_printf(s, "Temp(%d/", state);
+		state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_MASK);
+		seq_printf(s, "%d) ", translate_temp(state));
+
+		r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS0);
+		state = REG_GET_MASK(r, SENSOR_STATUS0_VALID_MASK);
+		seq_printf(s, "Capture(%d/", state);
+		state = REG_GET_MASK(r, SENSOR_STATUS0_CAPTURE_MASK);
+		seq_printf(s, "%d) ", state);
+
+		r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG0);
+		state = REG_GET_MASK(r, SENSOR_CONFIG0_STOP);
+		seq_printf(s, "Stop(%d) ", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG0_TALL_MASK);
+		seq_printf(s, "Tall(%d) ", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG0_TCALC_OVER);
+		seq_printf(s, "Over(%d/", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG0_OVER);
+		seq_printf(s, "%d/", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG0_CPTR_OVER);
+		seq_printf(s, "%d) ", state);
+
+		r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG2);
+		state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMA_MASK);
+		seq_printf(s, "Therm_A/B(%d/", state);
+		state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMB_MASK);
+		seq_printf(s, "%d)\n", (s16)state);
+	}
+
+	r = readl(ts->regs + SENSOR_PDIV);
+	seq_printf(s, "PDIV: 0x%x\n", r);
+
+	r = readl(ts->regs + SENSOR_HOTSPOT_OFF);
+	seq_printf(s, "HOTSPOT: 0x%x\n", r);
+
+	seq_puts(s, "\n");
+	seq_puts(s, "-----SOC_THERM-----\n");
+
+	r = readl(ts->regs + SENSOR_TEMP1);
+	state = REG_GET_MASK(r, SENSOR_TEMP1_CPU_TEMP_MASK);
+	seq_printf(s, "Temperatures: CPU(%d) ", translate_temp(state));
+	state = REG_GET_MASK(r, SENSOR_TEMP1_GPU_TEMP_MASK);
+	seq_printf(s, " GPU(%d) ", translate_temp(state));
+	r = readl(ts->regs + SENSOR_TEMP2);
+	state = REG_GET_MASK(r, SENSOR_TEMP2_PLLX_TEMP_MASK);
+	seq_printf(s, " PLLX(%d) ", translate_temp(state));
+	state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
+	seq_printf(s, " MEM(%d)\n", translate_temp(state));
+
+	for (i = 0; i < ts->soc->num_ttgs; i++) {
+		seq_printf(s, "%s:\n", ttgs[i]->name);
+		for (level = 0; level < 4; level++) {
+			s32 v;
+			u32 mask;
+			u16 off = ttgs[i]->thermctl_lvl0_offset;
+
+			r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
+
+			mask = ttgs[i]->thermctl_lvl0_up_thresh_mask;
+			state = REG_GET_MASK(r, mask);
+			v = sign_extend32(state, ts->soc->bptt - 1);
+			v *= ts->soc->thresh_grain;
+			seq_printf(s, "   %d: Up/Dn(%d /", level, v);
+
+			mask = ttgs[i]->thermctl_lvl0_dn_thresh_mask;
+			state = REG_GET_MASK(r, mask);
+			v = sign_extend32(state, ts->soc->bptt - 1);
+			v *= ts->soc->thresh_grain;
+			seq_printf(s, "%d ) ", v);
+
+			mask = THERMCTL_LVL0_CPU0_EN_MASK;
+			state = REG_GET_MASK(r, mask);
+			seq_printf(s, "En(%d) ", state);
+
+			mask = THERMCTL_LVL0_CPU0_CPU_THROT_MASK;
+			state = REG_GET_MASK(r, mask);
+			seq_puts(s, "CPU Throt");
+			if (!state)
+				seq_printf(s, "(%s) ", "none");
+			else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT)
+				seq_printf(s, "(%s) ", "L");
+			else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY)
+				seq_printf(s, "(%s) ", "H");
+			else
+				seq_printf(s, "(%s) ", "H+L");
+
+			mask = THERMCTL_LVL0_CPU0_GPU_THROT_MASK;
+			state = REG_GET_MASK(r, mask);
+			seq_puts(s, "GPU Throt");
+			if (!state)
+				seq_printf(s, "(%s) ", "none");
+			else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT)
+				seq_printf(s, "(%s) ", "L");
+			else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY)
+				seq_printf(s, "(%s) ", "H");
+			else
+				seq_printf(s, "(%s) ", "H+L");
+
+			mask = THERMCTL_LVL0_CPU0_STATUS_MASK;
+			state = REG_GET_MASK(r, mask);
+			seq_printf(s, "Status(%s)\n",
+				   state == 0 ? "LO" :
+				   state == 1 ? "In" :
+				   state == 2 ? "Res" : "HI");
+		}
+	}
+
+	r = readl(ts->regs + THERMCTL_STATS_CTL);
+	seq_printf(s, "STATS: Up(%s) Dn(%s)\n",
+		   r & STATS_CTL_EN_UP ? "En" : "--",
+		   r & STATS_CTL_EN_DN ? "En" : "--");
+
+	for (level = 0; level < 4; level++) {
+		u16 off;
+
+		off = THERMCTL_LVL0_UP_STATS;
+		r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
+		seq_printf(s, "  Level_%d Up(%d) ", level, r);
+
+		off = THERMCTL_LVL0_DN_STATS;
+		r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
+		seq_printf(s, "Dn(%d)\n", r);
+	}
+
+	r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
+	state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask);
+	seq_printf(s, "Thermtrip Any En(%d)\n", state);
+	for (i = 0; i < ts->soc->num_ttgs; i++) {
+		state = REG_GET_MASK(r, ttgs[i]->thermtrip_enable_mask);
+		seq_printf(s, "     %s En(%d) ", ttgs[i]->name, state);
+		state = REG_GET_MASK(r, ttgs[i]->thermtrip_threshold_mask);
+		state *= ts->soc->thresh_grain;
+		seq_printf(s, "Thresh(%d)\n", state);
+	}
+
+	r = readl(ts->regs + THROT_GLOBAL_CFG);
+	seq_puts(s, "\n");
+	seq_printf(s, "GLOBAL THROTTLE CONFIG: 0x%08x\n", r);
+
+	seq_puts(s, "---------------------------------------------------\n");
+	r = readl(ts->regs + THROT_STATUS);
+	state = REG_GET_MASK(r, THROT_STATUS_BREACH_MASK);
+	seq_printf(s, "THROT STATUS: breach(%d) ", state);
+	state = REG_GET_MASK(r, THROT_STATUS_STATE_MASK);
+	seq_printf(s, "state(%d) ", state);
+	state = REG_GET_MASK(r, THROT_STATUS_ENABLED_MASK);
+	seq_printf(s, "enabled(%d)\n", state);
+
+	r = readl(ts->regs + CPU_PSKIP_STATUS);
+	if (ts->soc->use_ccroc) {
+		state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK);
+		seq_printf(s, "CPU PSKIP STATUS: enabled(%d)\n", state);
+	} else {
+		state = REG_GET_MASK(r, XPU_PSKIP_STATUS_M_MASK);
+		seq_printf(s, "CPU PSKIP STATUS: M(%d) ", state);
+		state = REG_GET_MASK(r, XPU_PSKIP_STATUS_N_MASK);
+		seq_printf(s, "N(%d) ", state);
+		state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK);
+		seq_printf(s, "enabled(%d)\n", state);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(regs);
+
+static void soctherm_debug_init(struct platform_device *pdev)
+{
+	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+	struct dentry *root;
+
+	root = debugfs_create_dir("soctherm", NULL);
+
+	tegra->debugfs_dir = root;
+
+	debugfs_create_file("reg_contents", 0644, root, pdev, &regs_fops);
+}
+#else
+static inline void soctherm_debug_init(struct platform_device *pdev) {}
+#endif
+
+static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
+{
+	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+	int err;
+
+	if (!tegra->clock_soctherm || !tegra->clock_tsensor)
+		return -EINVAL;
+
+	reset_control_assert(tegra->reset);
+
+	if (enable) {
+		err = clk_prepare_enable(tegra->clock_soctherm);
+		if (err) {
+			reset_control_deassert(tegra->reset);
+			return err;
+		}
+
+		err = clk_prepare_enable(tegra->clock_tsensor);
+		if (err) {
+			clk_disable_unprepare(tegra->clock_soctherm);
+			reset_control_deassert(tegra->reset);
+			return err;
+		}
+	} else {
+		clk_disable_unprepare(tegra->clock_tsensor);
+		clk_disable_unprepare(tegra->clock_soctherm);
+	}
+
+	reset_control_deassert(tegra->reset);
+
+	return 0;
+}
+
+static int throt_get_cdev_max_state(struct thermal_cooling_device *cdev,
+				    unsigned long *max_state)
+{
+	*max_state = 1;
+	return 0;
+}
+
+static int throt_get_cdev_cur_state(struct thermal_cooling_device *cdev,
+				    unsigned long *cur_state)
+{
+	struct tegra_soctherm *ts = cdev->devdata;
+	u32 r;
+
+	r = readl(ts->regs + THROT_STATUS);
+	if (REG_GET_MASK(r, THROT_STATUS_STATE_MASK))
+		*cur_state = 1;
+	else
+		*cur_state = 0;
+
+	return 0;
+}
+
+static int throt_set_cdev_state(struct thermal_cooling_device *cdev,
+				unsigned long cur_state)
+{
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops throt_cooling_ops = {
+	.get_max_state = throt_get_cdev_max_state,
+	.get_cur_state = throt_get_cdev_cur_state,
+	.set_cur_state = throt_set_cdev_state,
+};
+
+static int soctherm_thermtrips_parse(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	struct tsensor_group_thermtrips *tt = ts->soc->thermtrips;
+	const int max_num_prop = ts->soc->num_ttgs * 2;
+	u32 *tlb;
+	int i, j, n, ret;
+
+	if (!tt)
+		return -ENOMEM;
+
+	n = of_property_count_u32_elems(dev->of_node, "nvidia,thermtrips");
+	if (n <= 0) {
+		dev_info(dev,
+			 "missing thermtrips, will use critical trips as shut down temp\n");
+		return n;
+	}
+
+	n = min(max_num_prop, n);
+
+	tlb = devm_kcalloc(&pdev->dev, max_num_prop, sizeof(u32), GFP_KERNEL);
+	if (!tlb)
+		return -ENOMEM;
+	ret = of_property_read_u32_array(dev->of_node, "nvidia,thermtrips",
+					 tlb, n);
+	if (ret) {
+		dev_err(dev, "invalid num ele: thermtrips:%d\n", ret);
+		return ret;
+	}
+
+	i = 0;
+	for (j = 0; j < n; j = j + 2) {
+		if (tlb[j] >= TEGRA124_SOCTHERM_SENSOR_NUM)
+			continue;
+
+		tt[i].id = tlb[j];
+		tt[i].temp = tlb[j + 1];
+		i++;
+	}
+
+	return 0;
+}
+
+static void soctherm_oc_cfg_parse(struct device *dev,
+				struct device_node *np_oc,
+				struct soctherm_throt_cfg *stc)
+{
+	u32 val;
+
+	if (of_property_read_bool(np_oc, "nvidia,polarity-active-low"))
+		stc->oc_cfg.active_low = 1;
+	else
+		stc->oc_cfg.active_low = 0;
+
+	if (!of_property_read_u32(np_oc, "nvidia,count-threshold", &val)) {
+		stc->oc_cfg.intr_en = 1;
+		stc->oc_cfg.alarm_cnt_thresh = val;
+	}
+
+	if (!of_property_read_u32(np_oc, "nvidia,throttle-period-us", &val))
+		stc->oc_cfg.throt_period = val;
+
+	if (!of_property_read_u32(np_oc, "nvidia,alarm-filter", &val))
+		stc->oc_cfg.alarm_filter = val;
+
+	/* BRIEF throttling by default, do not support STICKY */
+	stc->oc_cfg.mode = OC_THROTTLE_MODE_BRIEF;
+}
+
+static int soctherm_throt_cfg_parse(struct device *dev,
+				    struct device_node *np,
+				    struct soctherm_throt_cfg *stc)
+{
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nvidia,priority", &val);
+	if (ret) {
+		dev_err(dev, "throttle-cfg: %s: invalid priority\n", stc->name);
+		return -EINVAL;
+	}
+	stc->priority = val;
+
+	ret = of_property_read_u32(np, ts->soc->use_ccroc ?
+				   "nvidia,cpu-throt-level" :
+				   "nvidia,cpu-throt-percent", &val);
+	if (!ret) {
+		if (ts->soc->use_ccroc &&
+		    val <= TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
+			stc->cpu_throt_level = val;
+		else if (!ts->soc->use_ccroc && val <= 100)
+			stc->cpu_throt_depth = val;
+		else
+			goto err;
+	} else {
+		goto err;
+	}
+
+	ret = of_property_read_u32(np, "nvidia,gpu-throt-level", &val);
+	if (!ret && val <= TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
+		stc->gpu_throt_level = val;
+	else
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(dev, "throttle-cfg: %s: no throt prop or invalid prop\n",
+		stc->name);
+	return -EINVAL;
+}
+
+/**
+ * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
+ * and register them as cooling devices.
+ * @pdev: Pointer to platform_device struct
+ */
+static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	struct device_node *np_stc, *np_stcc;
+	const char *name;
+	int i;
+
+	for (i = 0; i < THROTTLE_SIZE; i++) {
+		ts->throt_cfgs[i].name = throt_names[i];
+		ts->throt_cfgs[i].id = i;
+		ts->throt_cfgs[i].init = false;
+	}
+
+	np_stc = of_get_child_by_name(dev->of_node, "throttle-cfgs");
+	if (!np_stc) {
+		dev_info(dev,
+			 "throttle-cfg: no throttle-cfgs - not enabling\n");
+		return;
+	}
+
+	for_each_child_of_node(np_stc, np_stcc) {
+		struct soctherm_throt_cfg *stc;
+		struct thermal_cooling_device *tcd;
+		int err;
+
+		name = np_stcc->name;
+		stc = find_throttle_cfg_by_name(ts, name);
+		if (!stc) {
+			dev_err(dev,
+				"throttle-cfg: could not find %s\n", name);
+			continue;
+		}
+
+		if (stc->init) {
+			dev_err(dev, "throttle-cfg: %s: redefined!\n", name);
+			of_node_put(np_stcc);
+			break;
+		}
+
+		err = soctherm_throt_cfg_parse(dev, np_stcc, stc);
+		if (err)
+			continue;
+
+		if (stc->id >= THROTTLE_OC1) {
+			soctherm_oc_cfg_parse(dev, np_stcc, stc);
+			stc->init = true;
+		} else {
+
+			tcd = thermal_of_cooling_device_register(np_stcc,
+							 (char *)name, ts,
+							 &throt_cooling_ops);
+			if (IS_ERR_OR_NULL(tcd)) {
+				dev_err(dev,
+					"throttle-cfg: %s: failed to register cooling device\n",
+					name);
+				continue;
+			}
+			stc->cdev = tcd;
+			stc->init = true;
+		}
+
+	}
+
+	of_node_put(np_stc);
+}
+
+/**
+ * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config
+ * @ts: pointer to a struct tegra_soctherm
+ * @level: describing the level LOW/MED/HIGH of throttling
+ *
+ * It's necessary to set up the CPU-local CCROC NV_THERM instance with
+ * the M/N values desired for each level. This function does this.
+ *
+ * This function pre-programs the CCROC NV_THERM levels in terms of
+ * pre-configured "Low", "Medium" or "Heavy" throttle levels which are
+ * mapped to THROT_LEVEL_LOW, THROT_LEVEL_MED and THROT_LEVEL_HVY.
+ */
+static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level)
+{
+	u8 depth, dividend;
+	u32 r;
+
+	switch (level) {
+	case TEGRA_SOCTHERM_THROT_LEVEL_LOW:
+		depth = 50;
+		break;
+	case TEGRA_SOCTHERM_THROT_LEVEL_MED:
+		depth = 75;
+		break;
+	case TEGRA_SOCTHERM_THROT_LEVEL_HIGH:
+		depth = 80;
+		break;
+	case TEGRA_SOCTHERM_THROT_LEVEL_NONE:
+		return;
+	default:
+		return;
+	}
+
+	dividend = THROT_DEPTH_DIVIDEND(depth);
+
+	/* setup PSKIP in ccroc nv_therm registers */
+	r = ccroc_readl(ts, CCROC_THROT_PSKIP_RAMP_CPU_REG(level));
+	r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_DURATION_MASK, 0xff);
+	r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_STEP_MASK, 0xf);
+	ccroc_writel(ts, r, CCROC_THROT_PSKIP_RAMP_CPU_REG(level));
+
+	r = ccroc_readl(ts, CCROC_THROT_PSKIP_CTRL_CPU_REG(level));
+	r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_ENB_MASK, 1);
+	r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend);
+	r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff);
+	ccroc_writel(ts, r, CCROC_THROT_PSKIP_CTRL_CPU_REG(level));
+}
+
+/**
+ * throttlectl_cpu_level_select() - program CPU pulse skipper config
+ * @ts: pointer to a struct tegra_soctherm
+ * @throt: the LIGHT/HEAVY of throttle event id
+ *
+ * Pulse skippers are used to throttle clock frequencies.  This
+ * function programs the pulse skippers based on @throt and platform
+ * data.  This function is used on SoCs which have CPU-local pulse
+ * skipper control, such as T13x. It programs soctherm's interface to
+ * Denver:CCROC NV_THERM in terms of Low, Medium and HIGH throttling
+ * vectors. PSKIP_BYPASS mode is set as required per HW spec.
+ */
+static void throttlectl_cpu_level_select(struct tegra_soctherm *ts,
+					 enum soctherm_throttle_id throt)
+{
+	u32 r, throt_vect;
+
+	/* Denver:CCROC NV_THERM interface N:3 Mapping */
+	switch (ts->throt_cfgs[throt].cpu_throt_level) {
+	case TEGRA_SOCTHERM_THROT_LEVEL_LOW:
+		throt_vect = THROT_VECT_LOW;
+		break;
+	case TEGRA_SOCTHERM_THROT_LEVEL_MED:
+		throt_vect = THROT_VECT_MED;
+		break;
+	case TEGRA_SOCTHERM_THROT_LEVEL_HIGH:
+		throt_vect = THROT_VECT_HIGH;
+		break;
+	default:
+		throt_vect = THROT_VECT_NONE;
+		break;
+	}
+
+	r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_CPU_MASK, throt_vect);
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT2_CPU_MASK, throt_vect);
+	writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+
+	/* bypass sequencer in soc_therm as it is programmed in ccroc */
+	r = REG_SET_MASK(0, THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK, 1);
+	writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
+}
+
+/**
+ * throttlectl_cpu_mn() - program CPU pulse skipper configuration
+ * @ts: pointer to a struct tegra_soctherm
+ * @throt: the LIGHT/HEAVY of throttle event id
+ *
+ * Pulse skippers are used to throttle clock frequencies.  This
+ * function programs the pulse skippers based on @throt and platform
+ * data.  This function is used for CPUs that have "remote" pulse
+ * skipper control, e.g., the CPU pulse skipper is controlled by the
+ * SOC_THERM IP block.  (SOC_THERM is located outside the CPU
+ * complex.)
+ */
+static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
+			       enum soctherm_throttle_id throt)
+{
+	u32 r;
+	int depth;
+	u8 dividend;
+
+	depth = ts->throt_cfgs[throt].cpu_throt_depth;
+	dividend = THROT_DEPTH_DIVIDEND(depth);
+
+	r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend);
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff);
+	writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+
+	r = readl(ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
+	r = REG_SET_MASK(r, THROT_PSKIP_RAMP_DURATION_MASK, 0xff);
+	r = REG_SET_MASK(r, THROT_PSKIP_RAMP_STEP_MASK, 0xf);
+	writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
+}
+
+/**
+ * throttlectl_gpu_level_select() - selects throttling level for GPU
+ * @ts: pointer to a struct tegra_soctherm
+ * @throt: the LIGHT/HEAVY of throttle event id
+ *
+ * This function programs soctherm's interface to GK20a NV_THERM to select
+ * pre-configured "Low", "Medium" or "Heavy" throttle levels.
+ *
+ * Return: boolean true if HW was programmed
+ */
+static void throttlectl_gpu_level_select(struct tegra_soctherm *ts,
+					 enum soctherm_throttle_id throt)
+{
+	u32 r, level, throt_vect;
+
+	level = ts->throt_cfgs[throt].gpu_throt_level;
+	throt_vect = THROT_LEVEL_TO_DEPTH(level);
+	r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_GPU));
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
+	r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_GPU_MASK, throt_vect);
+	writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_GPU));
+}
+
+static int soctherm_oc_cfg_program(struct tegra_soctherm *ts,
+				      enum soctherm_throttle_id throt)
+{
+	u32 r;
+	struct soctherm_oc_cfg *oc = &ts->throt_cfgs[throt].oc_cfg;
+
+	if (oc->mode == OC_THROTTLE_MODE_DISABLED)
+		return -EINVAL;
+
+	r = REG_SET_MASK(0, OC1_CFG_HW_RESTORE_MASK, 1);
+	r = REG_SET_MASK(r, OC1_CFG_THROTTLE_MODE_MASK, oc->mode);
+	r = REG_SET_MASK(r, OC1_CFG_ALARM_POLARITY_MASK, oc->active_low);
+	r = REG_SET_MASK(r, OC1_CFG_EN_THROTTLE_MASK, 1);
+	writel(r, ts->regs + ALARM_CFG(throt));
+	writel(oc->throt_period, ts->regs + ALARM_THROTTLE_PERIOD(throt));
+	writel(oc->alarm_cnt_thresh, ts->regs + ALARM_CNT_THRESHOLD(throt));
+	writel(oc->alarm_filter, ts->regs + ALARM_FILTER(throt));
+	soctherm_oc_intr_enable(ts, throt, oc->intr_en);
+
+	return 0;
+}
+
+/**
+ * soctherm_throttle_program() - programs pulse skippers' configuration
+ * @ts: pointer to a struct tegra_soctherm
+ * @throt: the LIGHT/HEAVY of the throttle event id.
+ *
+ * Pulse skippers are used to throttle clock frequencies.
+ * This function programs the pulse skippers.
+ */
+static void soctherm_throttle_program(struct tegra_soctherm *ts,
+				      enum soctherm_throttle_id throt)
+{
+	u32 r;
+	struct soctherm_throt_cfg stc = ts->throt_cfgs[throt];
+
+	if (!stc.init)
+		return;
+
+	if ((throt >= THROTTLE_OC1) && (soctherm_oc_cfg_program(ts, throt)))
+		return;
+
+	/* Setup PSKIP parameters */
+	if (ts->soc->use_ccroc)
+		throttlectl_cpu_level_select(ts, throt);
+	else
+		throttlectl_cpu_mn(ts, throt);
+
+	throttlectl_gpu_level_select(ts, throt);
+
+	r = REG_SET_MASK(0, THROT_PRIORITY_LITE_PRIO_MASK, stc.priority);
+	writel(r, ts->regs + THROT_PRIORITY_CTRL(throt));
+
+	r = REG_SET_MASK(0, THROT_DELAY_LITE_DELAY_MASK, 0);
+	writel(r, ts->regs + THROT_DELAY_CTRL(throt));
+
+	r = readl(ts->regs + THROT_PRIORITY_LOCK);
+	r = REG_GET_MASK(r, THROT_PRIORITY_LOCK_PRIORITY_MASK);
+	if (r >= stc.priority)
+		return;
+	r = REG_SET_MASK(0, THROT_PRIORITY_LOCK_PRIORITY_MASK,
+			 stc.priority);
+	writel(r, ts->regs + THROT_PRIORITY_LOCK);
+}
+
+static void tegra_soctherm_throttle(struct device *dev)
+{
+	struct tegra_soctherm *ts = dev_get_drvdata(dev);
+	u32 v;
+	int i;
+
+	/* configure LOW, MED and HIGH levels for CCROC NV_THERM */
+	if (ts->soc->use_ccroc) {
+		throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_LOW);
+		throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_MED);
+		throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_HIGH);
+	}
+
+	/* Thermal HW throttle programming */
+	for (i = 0; i < THROTTLE_SIZE; i++)
+		soctherm_throttle_program(ts, i);
+
+	v = REG_SET_MASK(0, THROT_GLOBAL_ENB_MASK, 1);
+	if (ts->soc->use_ccroc) {
+		ccroc_writel(ts, v, CCROC_GLOBAL_CFG);
+
+		v = ccroc_readl(ts, CCROC_SUPER_CCLKG_DIVIDER);
+		v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
+		ccroc_writel(ts, v, CCROC_SUPER_CCLKG_DIVIDER);
+	} else {
+		writel(v, ts->regs + THROT_GLOBAL_CFG);
+
+		v = readl(ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
+		v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
+		writel(v, ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
+	}
+
+	/* initialize stats collection */
+	v = STATS_CTL_CLR_DN | STATS_CTL_EN_DN |
+	    STATS_CTL_CLR_UP | STATS_CTL_EN_UP;
+	writel(v, ts->regs + THERMCTL_STATS_CTL);
+}
+
+static int soctherm_interrupts_init(struct platform_device *pdev,
+				    struct tegra_soctherm *tegra)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	ret = soctherm_oc_int_init(np, TEGRA_SOC_OC_IRQ_MAX);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "soctherm_oc_int_init failed\n");
+		return ret;
+	}
+
+	tegra->thermal_irq = platform_get_irq(pdev, 0);
+	if (tegra->thermal_irq < 0) {
+		dev_dbg(&pdev->dev, "get 'thermal_irq' failed.\n");
+		return 0;
+	}
+
+	tegra->edp_irq = platform_get_irq(pdev, 1);
+	if (tegra->edp_irq < 0) {
+		dev_dbg(&pdev->dev, "get 'edp_irq' failed.\n");
+		return 0;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev,
+					tegra->thermal_irq,
+					soctherm_thermal_isr,
+					soctherm_thermal_isr_thread,
+					IRQF_ONESHOT,
+					dev_name(&pdev->dev),
+					tegra);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq 'thermal_irq' failed.\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev,
+					tegra->edp_irq,
+					soctherm_edp_isr,
+					soctherm_edp_isr_thread,
+					IRQF_ONESHOT,
+					"soctherm_edp",
+					tegra);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq 'edp_irq' failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void soctherm_init(struct platform_device *pdev)
+{
+	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+	const struct tegra_tsensor_group **ttgs = tegra->soc->ttgs;
+	int i;
+	u32 pdiv, hotspot;
+
+	/* Initialize raw sensors */
+	for (i = 0; i < tegra->soc->num_tsensors; ++i)
+		enable_tsensor(tegra, i);
+
+	/* program pdiv and hotspot offsets per THERM */
+	pdiv = readl(tegra->regs + SENSOR_PDIV);
+	hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
+	for (i = 0; i < tegra->soc->num_ttgs; ++i) {
+		pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
+				    ttgs[i]->pdiv);
+		/* hotspot offset from PLLX, doesn't need to configure PLLX */
+		if (ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
+			continue;
+		hotspot =  REG_SET_MASK(hotspot,
+					ttgs[i]->pllx_hotspot_mask,
+					ttgs[i]->pllx_hotspot_diff);
+	}
+	writel(pdiv, tegra->regs + SENSOR_PDIV);
+	writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
+
+	/* Configure hw throttle */
+	tegra_soctherm_throttle(&pdev->dev);
+}
+
+static const struct of_device_id tegra_soctherm_of_match[] = {
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+	{
+		.compatible = "nvidia,tegra124-soctherm",
+		.data = &tegra124_soctherm,
+	},
+#endif
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+	{
+		.compatible = "nvidia,tegra132-soctherm",
+		.data = &tegra132_soctherm,
+	},
+#endif
+#ifdef CONFIG_ARCH_TEGRA_210_SOC
+	{
+		.compatible = "nvidia,tegra210-soctherm",
+		.data = &tegra210_soctherm,
+	},
+#endif
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
+
+static int tegra_soctherm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct tegra_soctherm *tegra;
+	struct thermal_zone_device *z;
+	struct tsensor_shared_calib shared_calib;
+	struct tegra_soctherm_soc *soc;
+	unsigned int i;
+	int err;
+
+	match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
+	if (!match)
+		return -ENODEV;
+
+	soc = (struct tegra_soctherm_soc *)match->data;
+	if (soc->num_ttgs > TEGRA124_SOCTHERM_SENSOR_NUM)
+		return -EINVAL;
+
+	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	mutex_init(&tegra->thermctl_lock);
+	dev_set_drvdata(&pdev->dev, tegra);
+
+	tegra->soc = soc;
+
+	tegra->regs = devm_platform_ioremap_resource_byname(pdev, "soctherm-reg");
+	if (IS_ERR(tegra->regs)) {
+		dev_err(&pdev->dev, "can't get soctherm registers");
+		return PTR_ERR(tegra->regs);
+	}
+
+	if (!tegra->soc->use_ccroc) {
+		tegra->clk_regs = devm_platform_ioremap_resource_byname(pdev, "car-reg");
+		if (IS_ERR(tegra->clk_regs)) {
+			dev_err(&pdev->dev, "can't get car clk registers");
+			return PTR_ERR(tegra->clk_regs);
+		}
+	} else {
+		tegra->ccroc_regs = devm_platform_ioremap_resource_byname(pdev, "ccroc-reg");
+		if (IS_ERR(tegra->ccroc_regs)) {
+			dev_err(&pdev->dev, "can't get ccroc registers");
+			return PTR_ERR(tegra->ccroc_regs);
+		}
+	}
+
+	tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
+	if (IS_ERR(tegra->reset)) {
+		dev_err(&pdev->dev, "can't get soctherm reset\n");
+		return PTR_ERR(tegra->reset);
+	}
+
+	tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
+	if (IS_ERR(tegra->clock_tsensor)) {
+		dev_err(&pdev->dev, "can't get tsensor clock\n");
+		return PTR_ERR(tegra->clock_tsensor);
+	}
+
+	tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
+	if (IS_ERR(tegra->clock_soctherm)) {
+		dev_err(&pdev->dev, "can't get soctherm clock\n");
+		return PTR_ERR(tegra->clock_soctherm);
+	}
+
+	tegra->calib = devm_kcalloc(&pdev->dev,
+				    soc->num_tsensors, sizeof(u32),
+				    GFP_KERNEL);
+	if (!tegra->calib)
+		return -ENOMEM;
+
+	/* calculate shared calibration data */
+	err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
+	if (err)
+		return err;
+
+	/* calculate tsensor calibration data */
+	for (i = 0; i < soc->num_tsensors; ++i) {
+		err = tegra_calc_tsensor_calib(&soc->tsensors[i],
+					       &shared_calib,
+					       &tegra->calib[i]);
+		if (err)
+			return err;
+	}
+
+	tegra->thermctl_tzs = devm_kcalloc(&pdev->dev,
+					   soc->num_ttgs, sizeof(z),
+					   GFP_KERNEL);
+	if (!tegra->thermctl_tzs)
+		return -ENOMEM;
+
+	err = soctherm_clk_enable(pdev, true);
+	if (err)
+		return err;
+
+	soctherm_thermtrips_parse(pdev);
+
+	soctherm_init_hw_throt_cdev(pdev);
+
+	soctherm_init(pdev);
+
+	for (i = 0; i < soc->num_ttgs; ++i) {
+		struct tegra_thermctl_zone *zone =
+			devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone) {
+			err = -ENOMEM;
+			goto disable_clocks;
+		}
+
+		zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
+		zone->dev = &pdev->dev;
+		zone->sg = soc->ttgs[i];
+		zone->ts = tegra;
+
+		z = devm_thermal_of_zone_register(&pdev->dev,
+						  soc->ttgs[i]->id, zone,
+						  &tegra_of_thermal_ops);
+		if (IS_ERR(z)) {
+			err = PTR_ERR(z);
+			dev_err(&pdev->dev, "failed to register sensor: %d\n",
+				err);
+			goto disable_clocks;
+		}
+
+		zone->tz = z;
+		tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
+
+		/* Configure hw trip points */
+		err = tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
+		if (err)
+			goto disable_clocks;
+	}
+
+	err = soctherm_interrupts_init(pdev, tegra);
+
+	soctherm_debug_init(pdev);
+
+	return 0;
+
+disable_clocks:
+	soctherm_clk_enable(pdev, false);
+
+	return err;
+}
+
+static int tegra_soctherm_remove(struct platform_device *pdev)
+{
+	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(tegra->debugfs_dir);
+
+	soctherm_clk_enable(pdev, false);
+
+	return 0;
+}
+
+static int __maybe_unused soctherm_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	soctherm_clk_enable(pdev, false);
+
+	return 0;
+}
+
+static int __maybe_unused soctherm_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+	struct tegra_soctherm_soc *soc = tegra->soc;
+	int err, i;
+
+	err = soctherm_clk_enable(pdev, true);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Resume failed: enable clocks failed\n");
+		return err;
+	}
+
+	soctherm_init(pdev);
+
+	for (i = 0; i < soc->num_ttgs; ++i) {
+		struct thermal_zone_device *tz;
+
+		tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
+		err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Resume failed: set hwtrips failed\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
+
+static struct platform_driver tegra_soctherm_driver = {
+	.probe = tegra_soctherm_probe,
+	.remove = tegra_soctherm_remove,
+	.driver = {
+		.name = "tegra_soctherm",
+		.pm = &tegra_soctherm_pm,
+		.of_match_table = tegra_soctherm_of_match,
+	},
+};
+module_platform_driver(tegra_soctherm_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
new file mode 100644
index 000000000..70501e73d
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm.h
@@ -0,0 +1,153 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
+#define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
+
+#define THERMCTL_LEVEL0_GROUP_CPU               0x0
+#define THERMCTL_LEVEL0_GROUP_GPU		0x4
+#define THERMCTL_LEVEL0_GROUP_MEM		0x8
+#define THERMCTL_LEVEL0_GROUP_TSENSE		0xc
+
+#define SENSOR_CONFIG2                          8
+#define SENSOR_CONFIG2_THERMA_MASK		(0xffff << 16)
+#define SENSOR_CONFIG2_THERMA_SHIFT		16
+#define SENSOR_CONFIG2_THERMB_MASK		0xffff
+#define SENSOR_CONFIG2_THERMB_SHIFT		0
+
+#define THERMCTL_THERMTRIP_CTL			0x80
+/* BITs are defined in device file */
+
+#define THERMCTL_INTR_ENABLE			0x88
+#define THERMCTL_INTR_DISABLE			0x8c
+#define TH_INTR_UP_DN_EN			0x3
+#define THERM_IRQ_MEM_MASK			(TH_INTR_UP_DN_EN << 24)
+#define THERM_IRQ_GPU_MASK			(TH_INTR_UP_DN_EN << 16)
+#define THERM_IRQ_CPU_MASK			(TH_INTR_UP_DN_EN << 8)
+#define THERM_IRQ_TSENSE_MASK			(TH_INTR_UP_DN_EN << 0)
+
+#define SENSOR_PDIV				0x1c0
+#define SENSOR_PDIV_CPU_MASK			(0xf << 12)
+#define SENSOR_PDIV_GPU_MASK			(0xf << 8)
+#define SENSOR_PDIV_MEM_MASK			(0xf << 4)
+#define SENSOR_PDIV_PLLX_MASK			(0xf << 0)
+
+#define SENSOR_HOTSPOT_OFF			0x1c4
+#define SENSOR_HOTSPOT_CPU_MASK			(0xff << 16)
+#define SENSOR_HOTSPOT_GPU_MASK			(0xff << 8)
+#define SENSOR_HOTSPOT_MEM_MASK			(0xff << 0)
+
+#define SENSOR_TEMP1				0x1c8
+#define SENSOR_TEMP1_CPU_TEMP_MASK		(0xffff << 16)
+#define SENSOR_TEMP1_GPU_TEMP_MASK		0xffff
+#define SENSOR_TEMP2				0x1cc
+#define SENSOR_TEMP2_MEM_TEMP_MASK		(0xffff << 16)
+#define SENSOR_TEMP2_PLLX_TEMP_MASK		0xffff
+
+/**
+ * struct tegra_tsensor_group - SOC_THERM sensor group data
+ * @name: short name of the temperature sensor group
+ * @id: numeric ID of the temperature sensor group
+ * @sensor_temp_offset: offset of the SENSOR_TEMP* register
+ * @sensor_temp_mask: bit mask for this sensor group in SENSOR_TEMP* register
+ * @pdiv: the sensor count post-divider to use during runtime
+ * @pdiv_ate: the sensor count post-divider used during automated test
+ * @pdiv_mask: register bitfield mask for the PDIV field for this sensor
+ * @pllx_hotspot_diff: hotspot offset from the PLLX sensor, must be 0 for
+    PLLX sensor group
+ * @pllx_hotspot_mask: register bitfield mask for the HOTSPOT field
+ */
+struct tegra_tsensor_group {
+	const char *name;
+	u8 id;
+	u16 sensor_temp_offset;
+	u32 sensor_temp_mask;
+	u32 pdiv, pdiv_ate, pdiv_mask;
+	u32 pllx_hotspot_diff, pllx_hotspot_mask;
+	u32 thermtrip_enable_mask;
+	u32 thermtrip_any_en_mask;
+	u32 thermtrip_threshold_mask;
+	u32 thermctl_isr_mask;
+	u16 thermctl_lvl0_offset;
+	u32 thermctl_lvl0_up_thresh_mask;
+	u32 thermctl_lvl0_dn_thresh_mask;
+};
+
+struct tegra_tsensor_configuration {
+	u32 tall, tiddq_en, ten_count, pdiv, pdiv_ate, tsample, tsample_ate;
+};
+
+struct tegra_tsensor {
+	const char *name;
+	const u32 base;
+	const struct tegra_tsensor_configuration *config;
+	const u32 calib_fuse_offset;
+	/*
+	 * Correction values used to modify values read from
+	 * calibration fuses
+	 */
+	const s32 fuse_corr_alpha, fuse_corr_beta;
+	const struct tegra_tsensor_group *group;
+};
+
+struct tsensor_group_thermtrips {
+	u8 id;
+	u32 temp;
+};
+
+struct tegra_soctherm_fuse {
+	u32 fuse_base_cp_mask, fuse_base_cp_shift;
+	u32 fuse_base_ft_mask, fuse_base_ft_shift;
+	u32 fuse_shift_ft_mask, fuse_shift_ft_shift;
+	u32 fuse_spare_realignment;
+};
+
+struct tsensor_shared_calib {
+	u32 base_cp, base_ft;
+	u32 actual_temp_cp, actual_temp_ft;
+};
+
+struct tegra_soctherm_soc {
+	const struct tegra_tsensor *tsensors;
+	const unsigned int num_tsensors;
+	const struct tegra_tsensor_group **ttgs;
+	const unsigned int num_ttgs;
+	const struct tegra_soctherm_fuse *tfuse;
+	const int thresh_grain;
+	const unsigned int bptt;
+	const bool use_ccroc;
+	struct tsensor_group_thermtrips *thermtrips;
+};
+
+int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
+			    struct tsensor_shared_calib *shared);
+int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
+			     const struct tsensor_shared_calib *shared,
+			     u32 *calib);
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+extern const struct tegra_soctherm_soc tegra124_soctherm;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+extern const struct tegra_soctherm_soc tegra132_soctherm;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_210_SOC
+extern const struct tegra_soctherm_soc tegra210_soctherm;
+#endif
+
+#endif
+
diff --git a/drivers/thermal/tegra/tegra-bpmp-thermal.c b/drivers/thermal/tegra/tegra-bpmp-thermal.c
new file mode 100644
index 000000000..eb84f0b9d
--- /dev/null
+++ b/drivers/thermal/tegra/tegra-bpmp-thermal.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015-2017, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Mikko Perttunen <mperttunen@nvidia.com>
+ *	Aapo Vienamo	<avienamo@nvidia.com>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+#include <linux/workqueue.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp-abi.h>
+
+struct tegra_bpmp_thermal_zone {
+	struct tegra_bpmp_thermal *tegra;
+	struct thermal_zone_device *tzd;
+	struct work_struct tz_device_update_work;
+	unsigned int idx;
+};
+
+struct tegra_bpmp_thermal {
+	struct device *dev;
+	struct tegra_bpmp *bpmp;
+	unsigned int num_zones;
+	struct tegra_bpmp_thermal_zone **zones;
+};
+
+static int __tegra_bpmp_thermal_get_temp(struct tegra_bpmp_thermal_zone *zone,
+					 int *out_temp)
+{
+	struct mrq_thermal_host_to_bpmp_request req;
+	union mrq_thermal_bpmp_to_host_response reply;
+	struct tegra_bpmp_message msg;
+	int err;
+
+	memset(&req, 0, sizeof(req));
+	req.type = CMD_THERMAL_GET_TEMP;
+	req.get_temp.zone = zone->idx;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_THERMAL;
+	msg.tx.data = &req;
+	msg.tx.size = sizeof(req);
+	msg.rx.data = &reply;
+	msg.rx.size = sizeof(reply);
+
+	err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	*out_temp = reply.get_temp.temp;
+
+	return 0;
+}
+
+static int tegra_bpmp_thermal_get_temp(struct thermal_zone_device *tz, int *out_temp)
+{
+	return __tegra_bpmp_thermal_get_temp(tz->devdata, out_temp);
+}
+
+static int tegra_bpmp_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct tegra_bpmp_thermal_zone *zone = tz->devdata;
+	struct mrq_thermal_host_to_bpmp_request req;
+	struct tegra_bpmp_message msg;
+	int err;
+
+	memset(&req, 0, sizeof(req));
+	req.type = CMD_THERMAL_SET_TRIP;
+	req.set_trip.zone = zone->idx;
+	req.set_trip.enabled = true;
+	req.set_trip.low = low;
+	req.set_trip.high = high;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_THERMAL;
+	msg.tx.data = &req;
+	msg.tx.size = sizeof(req);
+
+	err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void tz_device_update_work_fn(struct work_struct *work)
+{
+	struct tegra_bpmp_thermal_zone *zone;
+
+	zone = container_of(work, struct tegra_bpmp_thermal_zone,
+			    tz_device_update_work);
+
+	thermal_zone_device_update(zone->tzd, THERMAL_TRIP_VIOLATED);
+}
+
+static void bpmp_mrq_thermal(unsigned int mrq, struct tegra_bpmp_channel *ch,
+			     void *data)
+{
+	struct mrq_thermal_bpmp_to_host_request *req;
+	struct tegra_bpmp_thermal *tegra = data;
+	int i;
+
+	req = (struct mrq_thermal_bpmp_to_host_request *)ch->ib->data;
+
+	if (req->type != CMD_THERMAL_HOST_TRIP_REACHED) {
+		dev_err(tegra->dev, "%s: invalid request type: %d\n",
+			__func__, req->type);
+		tegra_bpmp_mrq_return(ch, -EINVAL, NULL, 0);
+		return;
+	}
+
+	for (i = 0; i < tegra->num_zones; ++i) {
+		if (tegra->zones[i]->idx != req->host_trip_reached.zone)
+			continue;
+
+		schedule_work(&tegra->zones[i]->tz_device_update_work);
+		tegra_bpmp_mrq_return(ch, 0, NULL, 0);
+		return;
+	}
+
+	dev_err(tegra->dev, "%s: invalid thermal zone: %d\n", __func__,
+		req->host_trip_reached.zone);
+	tegra_bpmp_mrq_return(ch, -EINVAL, NULL, 0);
+}
+
+static int tegra_bpmp_thermal_get_num_zones(struct tegra_bpmp *bpmp,
+					    int *num_zones)
+{
+	struct mrq_thermal_host_to_bpmp_request req;
+	union mrq_thermal_bpmp_to_host_response reply;
+	struct tegra_bpmp_message msg;
+	int err;
+
+	memset(&req, 0, sizeof(req));
+	req.type = CMD_THERMAL_GET_NUM_ZONES;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_THERMAL;
+	msg.tx.data = &req;
+	msg.tx.size = sizeof(req);
+	msg.rx.data = &reply;
+	msg.rx.size = sizeof(reply);
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	*num_zones = reply.get_num_zones.num;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops tegra_bpmp_of_thermal_ops = {
+	.get_temp = tegra_bpmp_thermal_get_temp,
+	.set_trips = tegra_bpmp_thermal_set_trips,
+};
+
+static int tegra_bpmp_thermal_probe(struct platform_device *pdev)
+{
+	struct tegra_bpmp *bpmp = dev_get_drvdata(pdev->dev.parent);
+	struct tegra_bpmp_thermal *tegra;
+	struct thermal_zone_device *tzd;
+	unsigned int i, max_num_zones;
+	int err;
+
+	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	tegra->dev = &pdev->dev;
+	tegra->bpmp = bpmp;
+
+	err = tegra_bpmp_thermal_get_num_zones(bpmp, &max_num_zones);
+	if (err) {
+		dev_err(&pdev->dev, "failed to get the number of zones: %d\n",
+			err);
+		return err;
+	}
+
+	tegra->zones = devm_kcalloc(&pdev->dev, max_num_zones,
+				    sizeof(*tegra->zones), GFP_KERNEL);
+	if (!tegra->zones)
+		return -ENOMEM;
+
+	for (i = 0; i < max_num_zones; ++i) {
+		struct tegra_bpmp_thermal_zone *zone;
+		int temp;
+
+		zone = devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone)
+			return -ENOMEM;
+
+		zone->idx = i;
+		zone->tegra = tegra;
+
+		err = __tegra_bpmp_thermal_get_temp(zone, &temp);
+		if (err < 0) {
+			devm_kfree(&pdev->dev, zone);
+			continue;
+		}
+
+		tzd = devm_thermal_of_zone_register(
+			&pdev->dev, i, zone, &tegra_bpmp_of_thermal_ops);
+		if (IS_ERR(tzd)) {
+			if (PTR_ERR(tzd) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+			devm_kfree(&pdev->dev, zone);
+			continue;
+		}
+
+		zone->tzd = tzd;
+		INIT_WORK(&zone->tz_device_update_work,
+			  tz_device_update_work_fn);
+
+		tegra->zones[tegra->num_zones++] = zone;
+	}
+
+	err = tegra_bpmp_request_mrq(bpmp, MRQ_THERMAL, bpmp_mrq_thermal,
+				     tegra);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register mrq handler: %d\n",
+			err);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, tegra);
+
+	return 0;
+}
+
+static int tegra_bpmp_thermal_remove(struct platform_device *pdev)
+{
+	struct tegra_bpmp_thermal *tegra = platform_get_drvdata(pdev);
+
+	tegra_bpmp_free_mrq(tegra->bpmp, MRQ_THERMAL, tegra);
+
+	return 0;
+}
+
+static const struct of_device_id tegra_bpmp_thermal_of_match[] = {
+	{ .compatible = "nvidia,tegra186-bpmp-thermal" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_bpmp_thermal_of_match);
+
+static struct platform_driver tegra_bpmp_thermal_driver = {
+	.probe = tegra_bpmp_thermal_probe,
+	.remove = tegra_bpmp_thermal_remove,
+	.driver = {
+		.name = "tegra-bpmp-thermal",
+		.of_match_table = tegra_bpmp_thermal_of_match,
+	},
+};
+module_platform_driver(tegra_bpmp_thermal_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra BPMP thermal sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c
new file mode 100644
index 000000000..20ad27f4d
--- /dev/null
+++ b/drivers/thermal/tegra/tegra124-soctherm.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+#define TEGRA124_THERMTRIP_ANY_EN_MASK		(0x1 << 28)
+#define TEGRA124_THERMTRIP_MEM_EN_MASK		(0x1 << 27)
+#define TEGRA124_THERMTRIP_GPU_EN_MASK		(0x1 << 26)
+#define TEGRA124_THERMTRIP_CPU_EN_MASK		(0x1 << 25)
+#define TEGRA124_THERMTRIP_TSENSE_EN_MASK	(0x1 << 24)
+#define TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK	(0xff << 16)
+#define TEGRA124_THERMTRIP_CPU_THRESH_MASK	(0xff << 8)
+#define TEGRA124_THERMTRIP_TSENSE_THRESH_MASK	0xff
+
+#define TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK	(0xff << 17)
+#define TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK	(0xff << 9)
+
+#define TEGRA124_THRESH_GRAIN			1000
+#define TEGRA124_BPTT				8
+
+static const struct tegra_tsensor_configuration tegra124_tsensor_config = {
+	.tall = 16300,
+	.tiddq_en = 1,
+	.ten_count = 1,
+	.tsample = 120,
+	.tsample_ate = 480,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
+	.id = TEGRA124_SOCTHERM_SENSOR_CPU,
+	.name	= "cpu",
+	.sensor_temp_offset	= SENSOR_TEMP1,
+	.sensor_temp_mask	= SENSOR_TEMP1_CPU_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_CPU_MASK,
+	.pllx_hotspot_diff = 10,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_CPU_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
+	.id = TEGRA124_SOCTHERM_SENSOR_GPU,
+	.name = "gpu",
+	.sensor_temp_offset = SENSOR_TEMP1,
+	.sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_GPU_MASK,
+	.pllx_hotspot_diff = 5,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_GPU_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
+	.id = TEGRA124_SOCTHERM_SENSOR_PLLX,
+	.name = "pll",
+	.sensor_temp_offset = SENSOR_TEMP2,
+	.sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
+	.id = TEGRA124_SOCTHERM_SENSOR_MEM,
+	.name = "mem",
+	.sensor_temp_offset = SENSOR_TEMP2,
+	.sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_MEM_MASK,
+	.pllx_hotspot_diff = 0,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_MEM_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = {
+	&tegra124_tsensor_group_cpu,
+	&tegra124_tsensor_group_gpu,
+	&tegra124_tsensor_group_pll,
+	&tegra124_tsensor_group_mem,
+};
+
+static const struct tegra_tsensor tegra124_tsensors[] = {
+	{
+		.name = "cpu0",
+		.base = 0xc0,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x098,
+		.fuse_corr_alpha = 1135400,
+		.fuse_corr_beta = -6266900,
+		.group = &tegra124_tsensor_group_cpu,
+	}, {
+		.name = "cpu1",
+		.base = 0xe0,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x084,
+		.fuse_corr_alpha = 1122220,
+		.fuse_corr_beta = -5700700,
+		.group = &tegra124_tsensor_group_cpu,
+	}, {
+		.name = "cpu2",
+		.base = 0x100,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x088,
+		.fuse_corr_alpha = 1127000,
+		.fuse_corr_beta = -6768200,
+		.group = &tegra124_tsensor_group_cpu,
+	}, {
+		.name = "cpu3",
+		.base = 0x120,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x12c,
+		.fuse_corr_alpha = 1110900,
+		.fuse_corr_beta = -6232000,
+		.group = &tegra124_tsensor_group_cpu,
+	}, {
+		.name = "mem0",
+		.base = 0x140,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x158,
+		.fuse_corr_alpha = 1122300,
+		.fuse_corr_beta = -5936400,
+		.group = &tegra124_tsensor_group_mem,
+	}, {
+		.name = "mem1",
+		.base = 0x160,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x15c,
+		.fuse_corr_alpha = 1145700,
+		.fuse_corr_beta = -7124600,
+		.group = &tegra124_tsensor_group_mem,
+	}, {
+		.name = "gpu",
+		.base = 0x180,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x154,
+		.fuse_corr_alpha = 1120100,
+		.fuse_corr_beta = -6000500,
+		.group = &tegra124_tsensor_group_gpu,
+	}, {
+		.name = "pllx",
+		.base = 0x1a0,
+		.config = &tegra124_tsensor_config,
+		.calib_fuse_offset = 0x160,
+		.fuse_corr_alpha = 1106500,
+		.fuse_corr_beta = -6729300,
+		.group = &tegra124_tsensor_group_pll,
+	},
+};
+
+/*
+ * Mask/shift bits in FUSE_TSENSOR_COMMON and
+ * FUSE_TSENSOR_COMMON, which are described in
+ * tegra_soctherm_fuse.c
+ */
+static const struct tegra_soctherm_fuse tegra124_soctherm_fuse = {
+	.fuse_base_cp_mask = 0x3ff,
+	.fuse_base_cp_shift = 0,
+	.fuse_base_ft_mask = 0x7ff << 10,
+	.fuse_base_ft_shift = 10,
+	.fuse_shift_ft_mask = 0x1f << 21,
+	.fuse_shift_ft_shift = 21,
+	.fuse_spare_realignment = 0x1fc,
+};
+
+const struct tegra_soctherm_soc tegra124_soctherm = {
+	.tsensors = tegra124_tsensors,
+	.num_tsensors = ARRAY_SIZE(tegra124_tsensors),
+	.ttgs = tegra124_tsensor_groups,
+	.num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups),
+	.tfuse = &tegra124_soctherm_fuse,
+	.thresh_grain = TEGRA124_THRESH_GRAIN,
+	.bptt = TEGRA124_BPTT,
+	.use_ccroc = false,
+};
diff --git a/drivers/thermal/tegra/tegra132-soctherm.c b/drivers/thermal/tegra/tegra132-soctherm.c
new file mode 100644
index 000000000..b76308fda
--- /dev/null
+++ b/drivers/thermal/tegra/tegra132-soctherm.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+#define TEGRA132_THERMTRIP_ANY_EN_MASK		(0x1 << 28)
+#define TEGRA132_THERMTRIP_MEM_EN_MASK		(0x1 << 27)
+#define TEGRA132_THERMTRIP_GPU_EN_MASK		(0x1 << 26)
+#define TEGRA132_THERMTRIP_CPU_EN_MASK		(0x1 << 25)
+#define TEGRA132_THERMTRIP_TSENSE_EN_MASK	(0x1 << 24)
+#define TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK	(0xff << 16)
+#define TEGRA132_THERMTRIP_CPU_THRESH_MASK	(0xff << 8)
+#define TEGRA132_THERMTRIP_TSENSE_THRESH_MASK	0xff
+
+#define TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK	(0xff << 17)
+#define TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK	(0xff << 9)
+
+#define TEGRA132_THRESH_GRAIN			1000
+#define TEGRA132_BPTT				8
+
+static const struct tegra_tsensor_configuration tegra132_tsensor_config = {
+	.tall = 16300,
+	.tiddq_en = 1,
+	.ten_count = 1,
+	.tsample = 120,
+	.tsample_ate = 480,
+};
+
+static const struct tegra_tsensor_group tegra132_tsensor_group_cpu = {
+	.id = TEGRA124_SOCTHERM_SENSOR_CPU,
+	.name = "cpu",
+	.sensor_temp_offset = SENSOR_TEMP1,
+	.sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_CPU_MASK,
+	.pllx_hotspot_diff = 10,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA132_THERMTRIP_CPU_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_CPU_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_CPU_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
+	.id = TEGRA124_SOCTHERM_SENSOR_GPU,
+	.name = "gpu",
+	.sensor_temp_offset = SENSOR_TEMP1,
+	.sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_GPU_MASK,
+	.pllx_hotspot_diff = 5,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA132_THERMTRIP_GPU_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_GPU_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
+	.id = TEGRA124_SOCTHERM_SENSOR_PLLX,
+	.name = "pll",
+	.sensor_temp_offset = SENSOR_TEMP2,
+	.sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA132_THERMTRIP_TSENSE_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_TSENSE_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
+	.id = TEGRA124_SOCTHERM_SENSOR_MEM,
+	.name = "mem",
+	.sensor_temp_offset = SENSOR_TEMP2,
+	.sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_MEM_MASK,
+	.pllx_hotspot_diff = 0,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA132_THERMTRIP_MEM_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_MEM_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group *tegra132_tsensor_groups[] = {
+	&tegra132_tsensor_group_cpu,
+	&tegra132_tsensor_group_gpu,
+	&tegra132_tsensor_group_pll,
+	&tegra132_tsensor_group_mem,
+};
+
+static struct tegra_tsensor tegra132_tsensors[] = {
+	{
+		.name = "cpu0",
+		.base = 0xc0,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x098,
+		.fuse_corr_alpha = 1126600,
+		.fuse_corr_beta = -9433500,
+		.group = &tegra132_tsensor_group_cpu,
+	}, {
+		.name = "cpu1",
+		.base = 0xe0,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x084,
+		.fuse_corr_alpha = 1110800,
+		.fuse_corr_beta = -7383000,
+		.group = &tegra132_tsensor_group_cpu,
+	}, {
+		.name = "cpu2",
+		.base = 0x100,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x088,
+		.fuse_corr_alpha = 1113800,
+		.fuse_corr_beta = -6215200,
+		.group = &tegra132_tsensor_group_cpu,
+	}, {
+		.name = "cpu3",
+		.base = 0x120,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x12c,
+		.fuse_corr_alpha = 1129600,
+		.fuse_corr_beta = -8196100,
+		.group = &tegra132_tsensor_group_cpu,
+	}, {
+		.name = "mem0",
+		.base = 0x140,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x158,
+		.fuse_corr_alpha = 1132900,
+		.fuse_corr_beta = -6755300,
+		.group = &tegra132_tsensor_group_mem,
+	}, {
+		.name = "mem1",
+		.base = 0x160,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x15c,
+		.fuse_corr_alpha = 1142300,
+		.fuse_corr_beta = -7374200,
+		.group = &tegra132_tsensor_group_mem,
+	}, {
+		.name = "gpu",
+		.base = 0x180,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x154,
+		.fuse_corr_alpha = 1125100,
+		.fuse_corr_beta = -6350400,
+		.group = &tegra132_tsensor_group_gpu,
+	}, {
+		.name = "pllx",
+		.base = 0x1a0,
+		.config = &tegra132_tsensor_config,
+		.calib_fuse_offset = 0x160,
+		.fuse_corr_alpha = 1118100,
+		.fuse_corr_beta = -8208800,
+		.group = &tegra132_tsensor_group_pll,
+	},
+};
+
+/*
+ * Mask/shift bits in FUSE_TSENSOR_COMMON and
+ * FUSE_TSENSOR_COMMON, which are described in
+ * tegra_soctherm_fuse.c
+ */
+static const struct tegra_soctherm_fuse tegra132_soctherm_fuse = {
+	.fuse_base_cp_mask = 0x3ff,
+	.fuse_base_cp_shift = 0,
+	.fuse_base_ft_mask = 0x7ff << 10,
+	.fuse_base_ft_shift = 10,
+	.fuse_shift_ft_mask = 0x1f << 21,
+	.fuse_shift_ft_shift = 21,
+	.fuse_spare_realignment = 0x1fc,
+};
+
+const struct tegra_soctherm_soc tegra132_soctherm = {
+	.tsensors = tegra132_tsensors,
+	.num_tsensors = ARRAY_SIZE(tegra132_tsensors),
+	.ttgs = tegra132_tsensor_groups,
+	.num_ttgs = ARRAY_SIZE(tegra132_tsensor_groups),
+	.tfuse = &tegra132_soctherm_fuse,
+	.thresh_grain = TEGRA132_THRESH_GRAIN,
+	.bptt = TEGRA132_BPTT,
+	.use_ccroc = true,
+};
diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c
new file mode 100644
index 000000000..d0ff793f1
--- /dev/null
+++ b/drivers/thermal/tegra/tegra210-soctherm.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/tegra/fuse.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+#define TEGRA210_THERMTRIP_ANY_EN_MASK		(0x1 << 31)
+#define TEGRA210_THERMTRIP_MEM_EN_MASK		(0x1 << 30)
+#define TEGRA210_THERMTRIP_GPU_EN_MASK		(0x1 << 29)
+#define TEGRA210_THERMTRIP_CPU_EN_MASK		(0x1 << 28)
+#define TEGRA210_THERMTRIP_TSENSE_EN_MASK	(0x1 << 27)
+#define TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK	(0x1ff << 18)
+#define TEGRA210_THERMTRIP_CPU_THRESH_MASK	(0x1ff << 9)
+#define TEGRA210_THERMTRIP_TSENSE_THRESH_MASK	0x1ff
+
+#define TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK	(0x1ff << 18)
+#define TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK	(0x1ff << 9)
+
+#define TEGRA210_THRESH_GRAIN			500
+#define TEGRA210_BPTT				9
+
+static const struct tegra_tsensor_configuration tegra210_tsensor_config = {
+	.tall = 16300,
+	.tiddq_en = 1,
+	.ten_count = 1,
+	.tsample = 120,
+	.tsample_ate = 480,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
+	.id = TEGRA124_SOCTHERM_SENSOR_CPU,
+	.name = "cpu",
+	.sensor_temp_offset = SENSOR_TEMP1,
+	.sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_CPU_MASK,
+	.pllx_hotspot_diff = 10,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_CPU_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
+	.id = TEGRA124_SOCTHERM_SENSOR_GPU,
+	.name = "gpu",
+	.sensor_temp_offset = SENSOR_TEMP1,
+	.sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_GPU_MASK,
+	.pllx_hotspot_diff = 5,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_GPU_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
+	.id = TEGRA124_SOCTHERM_SENSOR_PLLX,
+	.name = "pll",
+	.sensor_temp_offset = SENSOR_TEMP2,
+	.sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
+	.id = TEGRA124_SOCTHERM_SENSOR_MEM,
+	.name = "mem",
+	.sensor_temp_offset = SENSOR_TEMP2,
+	.sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+	.pdiv = 8,
+	.pdiv_ate = 8,
+	.pdiv_mask = SENSOR_PDIV_MEM_MASK,
+	.pllx_hotspot_diff = 0,
+	.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+	.thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK,
+	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_isr_mask = THERM_IRQ_MEM_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = {
+	&tegra210_tsensor_group_cpu,
+	&tegra210_tsensor_group_gpu,
+	&tegra210_tsensor_group_pll,
+	&tegra210_tsensor_group_mem,
+};
+
+static const struct tegra_tsensor tegra210_tsensors[] = {
+	{
+		.name = "cpu0",
+		.base = 0xc0,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x098,
+		.fuse_corr_alpha = 1085000,
+		.fuse_corr_beta = 3244200,
+		.group = &tegra210_tsensor_group_cpu,
+	}, {
+		.name = "cpu1",
+		.base = 0xe0,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x084,
+		.fuse_corr_alpha = 1126200,
+		.fuse_corr_beta = -67500,
+		.group = &tegra210_tsensor_group_cpu,
+	}, {
+		.name = "cpu2",
+		.base = 0x100,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x088,
+		.fuse_corr_alpha = 1098400,
+		.fuse_corr_beta = 2251100,
+		.group = &tegra210_tsensor_group_cpu,
+	}, {
+		.name = "cpu3",
+		.base = 0x120,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x12c,
+		.fuse_corr_alpha = 1108000,
+		.fuse_corr_beta = 602700,
+		.group = &tegra210_tsensor_group_cpu,
+	}, {
+		.name = "mem0",
+		.base = 0x140,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x158,
+		.fuse_corr_alpha = 1069200,
+		.fuse_corr_beta = 3549900,
+		.group = &tegra210_tsensor_group_mem,
+	}, {
+		.name = "mem1",
+		.base = 0x160,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x15c,
+		.fuse_corr_alpha = 1173700,
+		.fuse_corr_beta = -6263600,
+		.group = &tegra210_tsensor_group_mem,
+	}, {
+		.name = "gpu",
+		.base = 0x180,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x154,
+		.fuse_corr_alpha = 1074300,
+		.fuse_corr_beta = 2734900,
+		.group = &tegra210_tsensor_group_gpu,
+	}, {
+		.name = "pllx",
+		.base = 0x1a0,
+		.config = &tegra210_tsensor_config,
+		.calib_fuse_offset = 0x160,
+		.fuse_corr_alpha = 1039700,
+		.fuse_corr_beta = 6829100,
+		.group = &tegra210_tsensor_group_pll,
+	},
+};
+
+/*
+ * Mask/shift bits in FUSE_TSENSOR_COMMON and
+ * FUSE_TSENSOR_COMMON, which are described in
+ * tegra_soctherm_fuse.c
+ */
+static const struct tegra_soctherm_fuse tegra210_soctherm_fuse = {
+	.fuse_base_cp_mask = 0x3ff << 11,
+	.fuse_base_cp_shift = 11,
+	.fuse_base_ft_mask = 0x7ff << 21,
+	.fuse_base_ft_shift = 21,
+	.fuse_shift_ft_mask = 0x1f << 6,
+	.fuse_shift_ft_shift = 6,
+	.fuse_spare_realignment = 0,
+};
+
+static struct tsensor_group_thermtrips tegra210_tsensor_thermtrips[] = {
+	{.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+	{.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+	{.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+	{.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+};
+
+const struct tegra_soctherm_soc tegra210_soctherm = {
+	.tsensors = tegra210_tsensors,
+	.num_tsensors = ARRAY_SIZE(tegra210_tsensors),
+	.ttgs = tegra210_tsensor_groups,
+	.num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups),
+	.tfuse = &tegra210_soctherm_fuse,
+	.thresh_grain = TEGRA210_THRESH_GRAIN,
+	.bptt = TEGRA210_BPTT,
+	.use_ccroc = false,
+	.thermtrips = tegra210_tsensor_thermtrips,
+};
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
new file mode 100644
index 000000000..c34501287
--- /dev/null
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tegra30 SoC Thermal Sensor driver
+ *
+ * Based on downstream HWMON driver from NVIDIA.
+ * Copyright (C) 2011 NVIDIA Corporation
+ *
+ * Author: Dmitry Osipenko <digetx@gmail.com>
+ * Copyright (C) 2021 GRATE-DRIVER project
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+#define TSENSOR_SENSOR0_CONFIG0				0x0
+#define TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP		BIT(0)
+#define TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN		BIT(1)
+#define TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN		BIT(2)
+#define TSENSOR_SENSOR0_CONFIG0_DVFS_EN			BIT(3)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN	BIT(4)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN	BIT(5)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN	BIT(6)
+#define TSENSOR_SENSOR0_CONFIG0_M			GENMASK(23,  8)
+#define TSENSOR_SENSOR0_CONFIG0_N			GENMASK(31, 24)
+
+#define TSENSOR_SENSOR0_CONFIG1				0x8
+#define TSENSOR_SENSOR0_CONFIG1_TH1			GENMASK(15,  0)
+#define TSENSOR_SENSOR0_CONFIG1_TH2			GENMASK(31, 16)
+
+#define TSENSOR_SENSOR0_CONFIG2				0xc
+#define TSENSOR_SENSOR0_CONFIG2_TH3			GENMASK(15,  0)
+
+#define TSENSOR_SENSOR0_STATUS0				0x18
+#define TSENSOR_SENSOR0_STATUS0_STATE			GENMASK(2, 0)
+#define TSENSOR_SENSOR0_STATUS0_INTR			BIT(8)
+#define TSENSOR_SENSOR0_STATUS0_CURRENT_VALID		BIT(9)
+
+#define TSENSOR_SENSOR0_TS_STATUS1			0x1c
+#define TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT	GENMASK(31, 16)
+
+#define TEGRA30_FUSE_TEST_PROG_VER			0x28
+
+#define TEGRA30_FUSE_TSENSOR_CALIB			0x98
+#define TEGRA30_FUSE_TSENSOR_CALIB_LOW			GENMASK(15,  0)
+#define TEGRA30_FUSE_TSENSOR_CALIB_HIGH			GENMASK(31, 16)
+
+#define TEGRA30_FUSE_SPARE_BIT				0x144
+
+struct tegra_tsensor;
+
+struct tegra_tsensor_calibration_data {
+	int a, b, m, n, p, r;
+};
+
+struct tegra_tsensor_channel {
+	void __iomem *regs;
+	unsigned int id;
+	struct tegra_tsensor *ts;
+	struct thermal_zone_device *tzd;
+};
+
+struct tegra_tsensor {
+	void __iomem *regs;
+	bool swap_channels;
+	struct clk *clk;
+	struct device *dev;
+	struct reset_control *rst;
+	struct tegra_tsensor_channel ch[2];
+	struct tegra_tsensor_calibration_data calib;
+};
+
+static int tegra_tsensor_hw_enable(const struct tegra_tsensor *ts)
+{
+	u32 val;
+	int err;
+
+	err = reset_control_assert(ts->rst);
+	if (err) {
+		dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(ts->clk);
+	if (err) {
+		dev_err(ts->dev, "failed to enable clock: %d\n", err);
+		return err;
+	}
+
+	fsleep(1000);
+
+	err = reset_control_deassert(ts->rst);
+	if (err) {
+		dev_err(ts->dev, "failed to deassert hardware reset: %d\n", err);
+		goto disable_clk;
+	}
+
+	/*
+	 * Sensors are enabled after reset by default, but not gauging
+	 * until clock counter is programmed.
+	 *
+	 * M: number of reference clock pulses after which every
+	 *    temperature / voltage measurement is made
+	 *
+	 * N: number of reference clock counts for which the counter runs
+	 */
+	val  = FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_M, 12500);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_N, 255);
+
+	/* apply the same configuration to both channels */
+	writel_relaxed(val, ts->regs + 0x40 + TSENSOR_SENSOR0_CONFIG0);
+	writel_relaxed(val, ts->regs + 0x80 + TSENSOR_SENSOR0_CONFIG0);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(ts->clk);
+
+	return err;
+}
+
+static int tegra_tsensor_hw_disable(const struct tegra_tsensor *ts)
+{
+	int err;
+
+	err = reset_control_assert(ts->rst);
+	if (err) {
+		dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
+		return err;
+	}
+
+	clk_disable_unprepare(ts->clk);
+
+	return 0;
+}
+
+static void devm_tegra_tsensor_hw_disable(void *data)
+{
+	const struct tegra_tsensor *ts = data;
+
+	tegra_tsensor_hw_disable(ts);
+}
+
+static int tegra_tsensor_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	const struct tegra_tsensor_channel *tsc = tz->devdata;
+	const struct tegra_tsensor *ts = tsc->ts;
+	int err, c1, c2, c3, c4, counter;
+	u32 val;
+
+	/*
+	 * Counter will be invalid if hardware is misprogrammed or not enough
+	 * time passed since the time when sensor was enabled.
+	 */
+	err = readl_relaxed_poll_timeout(tsc->regs + TSENSOR_SENSOR0_STATUS0, val,
+					 val & TSENSOR_SENSOR0_STATUS0_CURRENT_VALID,
+					 21 * USEC_PER_MSEC,
+					 21 * USEC_PER_MSEC * 50);
+	if (err) {
+		dev_err_once(ts->dev, "ch%u: counter invalid\n", tsc->id);
+		return err;
+	}
+
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_TS_STATUS1);
+	counter = FIELD_GET(TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT, val);
+
+	/*
+	 * This shouldn't happen with a valid counter status, nevertheless
+	 * lets verify the value since it's in a separate (from status)
+	 * register.
+	 */
+	if (counter == 0xffff) {
+		dev_err_once(ts->dev, "ch%u: counter overflow\n", tsc->id);
+		return -EINVAL;
+	}
+
+	/*
+	 * temperature = a * counter + b
+	 * temperature = m * (temperature ^ 2) + n * temperature + p
+	 */
+	c1 = DIV_ROUND_CLOSEST(ts->calib.a * counter + ts->calib.b, 1000000);
+	c1 = c1 ?: 1;
+	c2 = DIV_ROUND_CLOSEST(ts->calib.p, c1);
+	c3 = c1 * ts->calib.m;
+	c4 = ts->calib.n;
+
+	*temp = DIV_ROUND_CLOSEST(c1 * (c2 + c3 + c4), 1000);
+
+	return 0;
+}
+
+static int tegra_tsensor_temp_to_counter(const struct tegra_tsensor *ts, int temp)
+{
+	int c1, c2;
+
+	c1 = DIV_ROUND_CLOSEST(ts->calib.p - temp * 1000, ts->calib.m);
+	c2 = -ts->calib.r - int_sqrt(ts->calib.r * ts->calib.r - c1);
+
+	return DIV_ROUND_CLOSEST(c2 * 1000000 - ts->calib.b, ts->calib.a);
+}
+
+static int tegra_tsensor_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	const struct tegra_tsensor_channel *tsc = tz->devdata;
+	const struct tegra_tsensor *ts = tsc->ts;
+	u32 val;
+
+	/*
+	 * TSENSOR doesn't trigger interrupt on the "low" temperature breach,
+	 * hence bail out if high temperature is unspecified.
+	 */
+	if (high == INT_MAX)
+		return 0;
+
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+	val &= ~TSENSOR_SENSOR0_CONFIG1_TH1;
+
+	high = tegra_tsensor_temp_to_counter(ts, high);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH1, high);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops ops = {
+	.get_temp = tegra_tsensor_get_temp,
+	.set_trips = tegra_tsensor_set_trips,
+};
+
+static bool
+tegra_tsensor_handle_channel_interrupt(const struct tegra_tsensor *ts,
+				       unsigned int id)
+{
+	const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	u32 val;
+
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_STATUS0);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_STATUS0);
+
+	if (FIELD_GET(TSENSOR_SENSOR0_STATUS0_STATE, val) == 5)
+		dev_err_ratelimited(ts->dev, "ch%u: counter overflowed\n", id);
+
+	if (!FIELD_GET(TSENSOR_SENSOR0_STATUS0_INTR, val))
+		return false;
+
+	thermal_zone_device_update(tsc->tzd, THERMAL_EVENT_UNSPECIFIED);
+
+	return true;
+}
+
+static irqreturn_t tegra_tsensor_isr(int irq, void *data)
+{
+	const struct tegra_tsensor *ts = data;
+	bool handled = false;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++)
+		handled |= tegra_tsensor_handle_channel_interrupt(ts, i);
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int tegra_tsensor_disable_hw_channel(const struct tegra_tsensor *ts,
+					    unsigned int id)
+{
+	const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	struct thermal_zone_device *tzd = tsc->tzd;
+	u32 val;
+	int err;
+
+	if (!tzd)
+		goto stop_channel;
+
+	err = thermal_zone_device_disable(tzd);
+	if (err) {
+		dev_err(ts->dev, "ch%u: failed to disable zone: %d\n", id, err);
+		return err;
+	}
+
+stop_channel:
+	/* stop channel gracefully */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP, 1);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+	return 0;
+}
+
+static void tegra_tsensor_get_hw_channel_trips(struct thermal_zone_device *tzd,
+					       int *hot_trip, int *crit_trip)
+{
+	unsigned int i;
+
+	/*
+	 * 90C is the maximal critical temperature of all Tegra30 SoC variants,
+	 * use it for the default trip if unspecified in a device-tree.
+	 */
+	*hot_trip  = 85000;
+	*crit_trip = 90000;
+
+	for (i = 0; i < tzd->num_trips; i++) {
+		enum thermal_trip_type type;
+		int trip_temp;
+
+		tzd->ops->get_trip_temp(tzd, i, &trip_temp);
+		tzd->ops->get_trip_type(tzd, i, &type);
+
+		if (type == THERMAL_TRIP_HOT)
+			*hot_trip = trip_temp;
+
+		if (type == THERMAL_TRIP_CRITICAL)
+			*crit_trip = trip_temp;
+	}
+
+	/* clamp hardware trips to the calibration limits */
+	*hot_trip = clamp(*hot_trip, 25000, 90000);
+
+	/*
+	 * Kernel will perform a normal system shut down if it will
+	 * see that critical temperature is breached, hence set the
+	 * hardware limit by 5C higher in order to allow system to
+	 * shut down gracefully before sending signal to the Power
+	 * Management controller.
+	 */
+	*crit_trip = clamp(*crit_trip + 5000, 25000, 90000);
+}
+
+static int tegra_tsensor_enable_hw_channel(const struct tegra_tsensor *ts,
+					   unsigned int id)
+{
+	const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	struct thermal_zone_device *tzd = tsc->tzd;
+	int err, hot_trip = 0, crit_trip = 0;
+	u32 val;
+
+	if (!tzd) {
+		val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+		val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
+		writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+		return 0;
+	}
+
+	tegra_tsensor_get_hw_channel_trips(tzd, &hot_trip, &crit_trip);
+
+	/* prevent potential racing with tegra_tsensor_set_trips() */
+	mutex_lock(&tzd->lock);
+
+	dev_info_once(ts->dev, "ch%u: PMC emergency shutdown trip set to %dC\n",
+		      id, DIV_ROUND_CLOSEST(crit_trip, 1000));
+
+	hot_trip  = tegra_tsensor_temp_to_counter(ts, hot_trip);
+	crit_trip = tegra_tsensor_temp_to_counter(ts, crit_trip);
+
+	/* program LEVEL2 counter threshold */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+	val &= ~TSENSOR_SENSOR0_CONFIG1_TH2;
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH2, hot_trip);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+
+	/* program LEVEL3 counter threshold */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG2);
+	val &= ~TSENSOR_SENSOR0_CONFIG2_TH3;
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG2_TH3, crit_trip);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG2);
+
+	/*
+	 * Enable sensor, emergency shutdown, interrupts for level 1/2/3
+	 * breaches and counter overflow condition.
+	 *
+	 * Disable DIV2 throttle for now since we need to figure out how
+	 * to integrate it properly with the thermal framework.
+	 *
+	 * Thermal levels supported by hardware:
+	 *
+	 *     Level 0 = cold
+	 *     Level 1 = passive cooling (cpufreq DVFS)
+	 *     Level 2 = passive cooling assisted by hardware (DIV2)
+	 *     Level 3 = emergency shutdown assisted by hardware (PMC)
+	 */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+	val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_DVFS_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN, 0);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN, 1);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+	mutex_unlock(&tzd->lock);
+
+	err = thermal_zone_device_enable(tzd);
+	if (err) {
+		dev_err(ts->dev, "ch%u: failed to enable zone: %d\n", id, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static bool tegra_tsensor_fuse_read_spare(unsigned int spare)
+{
+	u32 val = 0;
+
+	tegra_fuse_readl(TEGRA30_FUSE_SPARE_BIT + spare * 4, &val);
+
+	return !!val;
+}
+
+static int tegra_tsensor_nvmem_setup(struct tegra_tsensor *ts)
+{
+	u32 i, ate_ver = 0, cal = 0, t1_25C = 0, t2_90C = 0;
+	int err, c1_25C, c2_90C;
+
+	err = tegra_fuse_readl(TEGRA30_FUSE_TEST_PROG_VER, &ate_ver);
+	if (err) {
+		dev_err_probe(ts->dev, err, "failed to get ATE version\n");
+		return err;
+	}
+
+	if (ate_ver < 8) {
+		dev_info(ts->dev, "unsupported ATE version: %u\n", ate_ver);
+		return -ENODEV;
+	}
+
+	/*
+	 * We have two TSENSOR channels in a two different spots on SoC.
+	 * Second channel provides more accurate data on older SoC versions,
+	 * use it as a primary channel.
+	 */
+	if (ate_ver <= 21) {
+		dev_info_once(ts->dev,
+			      "older ATE version detected, channels remapped\n");
+		ts->swap_channels = true;
+	}
+
+	err = tegra_fuse_readl(TEGRA30_FUSE_TSENSOR_CALIB, &cal);
+	if (err) {
+		dev_err(ts->dev, "failed to get calibration data: %d\n", err);
+		return err;
+	}
+
+	/* get calibrated counter values for 25C/90C thresholds */
+	c1_25C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_LOW, cal);
+	c2_90C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_HIGH, cal);
+
+	/* and calibrated temperatures corresponding to the counter values */
+	for (i = 0; i < 7; i++) {
+		t1_25C |= tegra_tsensor_fuse_read_spare(14 + i) << i;
+		t1_25C |= tegra_tsensor_fuse_read_spare(21 + i) << i;
+
+		t2_90C |= tegra_tsensor_fuse_read_spare(0 + i) << i;
+		t2_90C |= tegra_tsensor_fuse_read_spare(7 + i) << i;
+	}
+
+	if (c2_90C - c1_25C <= t2_90C - t1_25C) {
+		dev_err(ts->dev, "invalid calibration data: %d %d %u %u\n",
+			c2_90C, c1_25C, t2_90C, t1_25C);
+		return -EINVAL;
+	}
+
+	/* all calibration coefficients are premultiplied by 1000000 */
+
+	ts->calib.a = DIV_ROUND_CLOSEST((t2_90C - t1_25C) * 1000000,
+					(c2_90C - c1_25C));
+
+	ts->calib.b = t1_25C * 1000000 - ts->calib.a * c1_25C;
+
+	if (tegra_sku_info.revision == TEGRA_REVISION_A01) {
+		ts->calib.m =     -2775;
+		ts->calib.n =   1338811;
+		ts->calib.p =  -7300000;
+	} else {
+		ts->calib.m =     -3512;
+		ts->calib.n =   1528943;
+		ts->calib.p = -11100000;
+	}
+
+	/* except the coefficient of a reduced quadratic equation */
+	ts->calib.r = DIV_ROUND_CLOSEST(ts->calib.n, ts->calib.m * 2);
+
+	dev_info_once(ts->dev,
+		      "calibration: %d %d %u %u ATE ver: %u SoC rev: %u\n",
+		      c2_90C, c1_25C, t2_90C, t1_25C, ate_ver,
+		      tegra_sku_info.revision);
+
+	return 0;
+}
+
+static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
+					  unsigned int id)
+{
+	struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	unsigned int hw_id = ts->swap_channels ? !id : id;
+
+	tsc->ts = ts;
+	tsc->id = id;
+	tsc->regs = ts->regs + 0x40 * (hw_id + 1);
+
+	tsc->tzd = devm_thermal_of_zone_register(ts->dev, id, tsc, &ops);
+	if (IS_ERR(tsc->tzd)) {
+		if (PTR_ERR(tsc->tzd) != -ENODEV)
+			return dev_err_probe(ts->dev, PTR_ERR(tsc->tzd),
+					     "failed to register thermal zone\n");
+
+		/*
+		 * It's okay if sensor isn't assigned to any thermal zone
+		 * in a device-tree.
+		 */
+		tsc->tzd = NULL;
+		return 0;
+	}
+
+	if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
+		dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
+
+	return 0;
+}
+
+static int tegra_tsensor_probe(struct platform_device *pdev)
+{
+	struct tegra_tsensor *ts;
+	unsigned int i;
+	int err, irq;
+
+	ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ts->dev = &pdev->dev;
+	platform_set_drvdata(pdev, ts);
+
+	ts->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ts->regs))
+		return PTR_ERR(ts->regs);
+
+	ts->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ts->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts->clk),
+				     "failed to get clock\n");
+
+	ts->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(ts->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts->rst),
+				     "failed to get reset control\n");
+
+	err = tegra_tsensor_nvmem_setup(ts);
+	if (err)
+		return err;
+
+	err = tegra_tsensor_hw_enable(ts);
+	if (err)
+		return err;
+
+	err = devm_add_action_or_reset(&pdev->dev,
+				       devm_tegra_tsensor_hw_disable,
+				       ts);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_register_channel(ts, i);
+		if (err)
+			return err;
+	}
+
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					tegra_tsensor_isr, IRQF_ONESHOT,
+					"tegra_tsensor", ts);
+	if (err)
+		return dev_err_probe(&pdev->dev, err,
+				     "failed to request interrupt\n");
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_enable_hw_channel(ts, i);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused tegra_tsensor_suspend(struct device *dev)
+{
+	struct tegra_tsensor *ts = dev_get_drvdata(dev);
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_disable_hw_channel(ts, i);
+		if (err)
+			goto enable_channel;
+	}
+
+	err = tegra_tsensor_hw_disable(ts);
+	if (err)
+		goto enable_channel;
+
+	return 0;
+
+enable_channel:
+	while (i--)
+		tegra_tsensor_enable_hw_channel(ts, i);
+
+	return err;
+}
+
+static int __maybe_unused tegra_tsensor_resume(struct device *dev)
+{
+	struct tegra_tsensor *ts = dev_get_drvdata(dev);
+	unsigned int i;
+	int err;
+
+	err = tegra_tsensor_hw_enable(ts);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_enable_hw_channel(ts, i);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops tegra_tsensor_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_tsensor_suspend,
+				      tegra_tsensor_resume)
+};
+
+static const struct of_device_id tegra_tsensor_of_match[] = {
+	{ .compatible = "nvidia,tegra30-tsensor", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tegra_tsensor_of_match);
+
+static struct platform_driver tegra_tsensor_driver = {
+	.probe = tegra_tsensor_probe,
+	.driver = {
+		.name = "tegra30-tsensor",
+		.of_match_table = tegra_tsensor_of_match,
+		.pm = &tegra_tsensor_pm_ops,
+	},
+};
+module_platform_driver(tegra_tsensor_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra30 Thermal Sensor driver");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
new file mode 100644
index 000000000..323e273e3
--- /dev/null
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generic ADC thermal driver
+ *
+ * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ */
+#include <linux/iio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+struct gadc_thermal_info {
+	struct device *dev;
+	struct thermal_zone_device *tz_dev;
+	struct iio_channel *channel;
+	s32 *lookup_table;
+	int nlookup_table;
+};
+
+static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
+{
+	int temp, temp_hi, temp_lo, adc_hi, adc_lo;
+	int i;
+
+	if (!gti->lookup_table)
+		return val;
+
+	for (i = 0; i < gti->nlookup_table; i++) {
+		if (val >= gti->lookup_table[2 * i + 1])
+			break;
+	}
+
+	if (i == 0) {
+		temp = gti->lookup_table[0];
+	} else if (i >= gti->nlookup_table) {
+		temp = gti->lookup_table[2 * (gti->nlookup_table - 1)];
+	} else {
+		adc_hi = gti->lookup_table[2 * i - 1];
+		adc_lo = gti->lookup_table[2 * i + 1];
+
+		temp_hi = gti->lookup_table[2 * i - 2];
+		temp_lo = gti->lookup_table[2 * i];
+
+		temp = temp_hi + mult_frac(temp_lo - temp_hi, val - adc_hi,
+					   adc_lo - adc_hi);
+	}
+
+	return temp;
+}
+
+static int gadc_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct gadc_thermal_info *gti = tz->devdata;
+	int val;
+	int ret;
+
+	ret = iio_read_channel_processed(gti->channel, &val);
+	if (ret < 0) {
+		dev_err(gti->dev, "IIO channel read failed %d\n", ret);
+		return ret;
+	}
+	*temp = gadc_thermal_adc_to_temp(gti, val);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops gadc_thermal_ops = {
+	.get_temp = gadc_thermal_get_temp,
+};
+
+static int gadc_thermal_read_linear_lookup_table(struct device *dev,
+						 struct gadc_thermal_info *gti)
+{
+	struct device_node *np = dev->of_node;
+	enum iio_chan_type chan_type;
+	int ntable;
+	int ret;
+
+	ntable = of_property_count_elems_of_size(np, "temperature-lookup-table",
+						 sizeof(u32));
+	if (ntable <= 0) {
+		ret = iio_get_channel_type(gti->channel, &chan_type);
+		if (ret || chan_type != IIO_TEMP)
+			dev_notice(dev,
+				   "no lookup table, assuming DAC channel returns milliCelcius\n");
+		return 0;
+	}
+
+	if (ntable % 2) {
+		dev_err(dev, "Pair of temperature vs ADC read value missing\n");
+		return -EINVAL;
+	}
+
+	gti->lookup_table = devm_kcalloc(dev,
+					 ntable, sizeof(*gti->lookup_table),
+					 GFP_KERNEL);
+	if (!gti->lookup_table)
+		return -ENOMEM;
+
+	ret = of_property_read_u32_array(np, "temperature-lookup-table",
+					 (u32 *)gti->lookup_table, ntable);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read temperature lookup table: %d\n",
+			ret);
+		return ret;
+	}
+
+	gti->nlookup_table = ntable / 2;
+
+	return 0;
+}
+
+static int gadc_thermal_probe(struct platform_device *pdev)
+{
+	struct gadc_thermal_info *gti;
+	int ret;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "Only DT based supported\n");
+		return -ENODEV;
+	}
+
+	gti = devm_kzalloc(&pdev->dev, sizeof(*gti), GFP_KERNEL);
+	if (!gti)
+		return -ENOMEM;
+
+	gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel");
+	if (IS_ERR(gti->channel)) {
+		ret = PTR_ERR(gti->channel);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = gadc_thermal_read_linear_lookup_table(&pdev->dev, gti);
+	if (ret < 0)
+		return ret;
+
+	gti->dev = &pdev->dev;
+	platform_set_drvdata(pdev, gti);
+
+	gti->tz_dev = devm_thermal_of_zone_register(&pdev->dev, 0, gti,
+						    &gadc_thermal_ops);
+	if (IS_ERR(gti->tz_dev)) {
+		ret = PTR_ERR(gti->tz_dev);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Thermal zone sensor register failed: %d\n",
+				ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_adc_thermal_match[] = {
+	{ .compatible = "generic-adc-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_adc_thermal_match);
+
+static struct platform_driver gadc_thermal_driver = {
+	.driver = {
+		.name = "generic-adc-thermal",
+		.of_match_table = of_adc_thermal_match,
+	},
+	.probe = gadc_thermal_probe,
+};
+
+module_platform_driver(gadc_thermal_driver);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("Generic ADC thermal driver using IIO framework with DT");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
new file mode 100644
index 000000000..ebb36b2c7
--- /dev/null
+++ b/drivers/thermal/thermal_core.c
@@ -0,0 +1,1512 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  thermal.c - Generic Thermal Management Sysfs support.
+ *
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/kdev_t.h>
+#include <linux/idr.h>
+#include <linux/thermal.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/thermal.h>
+
+#include "thermal_core.h"
+#include "thermal_hwmon.h"
+
+static DEFINE_IDA(thermal_tz_ida);
+static DEFINE_IDA(thermal_cdev_ida);
+
+static LIST_HEAD(thermal_tz_list);
+static LIST_HEAD(thermal_cdev_list);
+static LIST_HEAD(thermal_governor_list);
+
+static DEFINE_MUTEX(thermal_list_lock);
+static DEFINE_MUTEX(thermal_governor_lock);
+
+static atomic_t in_suspend;
+
+static struct thermal_governor *def_governor;
+
+/*
+ * Governor section: set of functions to handle thermal governors
+ *
+ * Functions to help in the life cycle of thermal governors within
+ * the thermal core and by the thermal governor code.
+ */
+
+static struct thermal_governor *__find_governor(const char *name)
+{
+	struct thermal_governor *pos;
+
+	if (!name || !name[0])
+		return def_governor;
+
+	list_for_each_entry(pos, &thermal_governor_list, governor_list)
+		if (!strncasecmp(name, pos->name, THERMAL_NAME_LENGTH))
+			return pos;
+
+	return NULL;
+}
+
+/**
+ * bind_previous_governor() - bind the previous governor of the thermal zone
+ * @tz:		a valid pointer to a struct thermal_zone_device
+ * @failed_gov_name:	the name of the governor that failed to register
+ *
+ * Register the previous governor of the thermal zone after a new
+ * governor has failed to be bound.
+ */
+static void bind_previous_governor(struct thermal_zone_device *tz,
+				   const char *failed_gov_name)
+{
+	if (tz->governor && tz->governor->bind_to_tz) {
+		if (tz->governor->bind_to_tz(tz)) {
+			dev_err(&tz->device,
+				"governor %s failed to bind and the previous one (%s) failed to bind again, thermal zone %s has no governor\n",
+				failed_gov_name, tz->governor->name, tz->type);
+			tz->governor = NULL;
+		}
+	}
+}
+
+/**
+ * thermal_set_governor() - Switch to another governor
+ * @tz:		a valid pointer to a struct thermal_zone_device
+ * @new_gov:	pointer to the new governor
+ *
+ * Change the governor of thermal zone @tz.
+ *
+ * Return: 0 on success, an error if the new governor's bind_to_tz() failed.
+ */
+static int thermal_set_governor(struct thermal_zone_device *tz,
+				struct thermal_governor *new_gov)
+{
+	int ret = 0;
+
+	if (tz->governor && tz->governor->unbind_from_tz)
+		tz->governor->unbind_from_tz(tz);
+
+	if (new_gov && new_gov->bind_to_tz) {
+		ret = new_gov->bind_to_tz(tz);
+		if (ret) {
+			bind_previous_governor(tz, new_gov->name);
+
+			return ret;
+		}
+	}
+
+	tz->governor = new_gov;
+
+	return ret;
+}
+
+int thermal_register_governor(struct thermal_governor *governor)
+{
+	int err;
+	const char *name;
+	struct thermal_zone_device *pos;
+
+	if (!governor)
+		return -EINVAL;
+
+	mutex_lock(&thermal_governor_lock);
+
+	err = -EBUSY;
+	if (!__find_governor(governor->name)) {
+		bool match_default;
+
+		err = 0;
+		list_add(&governor->governor_list, &thermal_governor_list);
+		match_default = !strncmp(governor->name,
+					 DEFAULT_THERMAL_GOVERNOR,
+					 THERMAL_NAME_LENGTH);
+
+		if (!def_governor && match_default)
+			def_governor = governor;
+	}
+
+	mutex_lock(&thermal_list_lock);
+
+	list_for_each_entry(pos, &thermal_tz_list, node) {
+		/*
+		 * only thermal zones with specified tz->tzp->governor_name
+		 * may run with tz->govenor unset
+		 */
+		if (pos->governor)
+			continue;
+
+		name = pos->tzp->governor_name;
+
+		if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) {
+			int ret;
+
+			ret = thermal_set_governor(pos, governor);
+			if (ret)
+				dev_err(&pos->device,
+					"Failed to set governor %s for thermal zone %s: %d\n",
+					governor->name, pos->type, ret);
+		}
+	}
+
+	mutex_unlock(&thermal_list_lock);
+	mutex_unlock(&thermal_governor_lock);
+
+	return err;
+}
+
+void thermal_unregister_governor(struct thermal_governor *governor)
+{
+	struct thermal_zone_device *pos;
+
+	if (!governor)
+		return;
+
+	mutex_lock(&thermal_governor_lock);
+
+	if (!__find_governor(governor->name))
+		goto exit;
+
+	mutex_lock(&thermal_list_lock);
+
+	list_for_each_entry(pos, &thermal_tz_list, node) {
+		if (!strncasecmp(pos->governor->name, governor->name,
+				 THERMAL_NAME_LENGTH))
+			thermal_set_governor(pos, NULL);
+	}
+
+	mutex_unlock(&thermal_list_lock);
+	list_del(&governor->governor_list);
+exit:
+	mutex_unlock(&thermal_governor_lock);
+}
+
+int thermal_zone_device_set_policy(struct thermal_zone_device *tz,
+				   char *policy)
+{
+	struct thermal_governor *gov;
+	int ret = -EINVAL;
+
+	mutex_lock(&thermal_governor_lock);
+	mutex_lock(&tz->lock);
+
+	gov = __find_governor(strim(policy));
+	if (!gov)
+		goto exit;
+
+	ret = thermal_set_governor(tz, gov);
+
+exit:
+	mutex_unlock(&tz->lock);
+	mutex_unlock(&thermal_governor_lock);
+
+	thermal_notify_tz_gov_change(tz->id, policy);
+
+	return ret;
+}
+
+int thermal_build_list_of_policies(char *buf)
+{
+	struct thermal_governor *pos;
+	ssize_t count = 0;
+
+	mutex_lock(&thermal_governor_lock);
+
+	list_for_each_entry(pos, &thermal_governor_list, governor_list) {
+		count += scnprintf(buf + count, PAGE_SIZE - count, "%s ",
+				   pos->name);
+	}
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+	mutex_unlock(&thermal_governor_lock);
+
+	return count;
+}
+
+static void __init thermal_unregister_governors(void)
+{
+	struct thermal_governor **governor;
+
+	for_each_governor_table(governor)
+		thermal_unregister_governor(*governor);
+}
+
+static int __init thermal_register_governors(void)
+{
+	int ret = 0;
+	struct thermal_governor **governor;
+
+	for_each_governor_table(governor) {
+		ret = thermal_register_governor(*governor);
+		if (ret) {
+			pr_err("Failed to register governor: '%s'",
+			       (*governor)->name);
+			break;
+		}
+
+		pr_info("Registered thermal governor '%s'",
+			(*governor)->name);
+	}
+
+	if (ret) {
+		struct thermal_governor **gov;
+
+		for_each_governor_table(gov) {
+			if (gov == governor)
+				break;
+			thermal_unregister_governor(*gov);
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * Zone update section: main control loop applied to each zone while monitoring
+ *
+ * in polling mode. The monitoring is done using a workqueue.
+ * Same update may be done on a zone by calling thermal_zone_device_update().
+ *
+ * An update means:
+ * - Non-critical trips will invoke the governor responsible for that zone;
+ * - Hot trips will produce a notification to userspace;
+ * - Critical trip point will cause a system shutdown.
+ */
+static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
+					    unsigned long delay)
+{
+	if (delay)
+		mod_delayed_work(system_freezable_power_efficient_wq,
+				 &tz->poll_queue, delay);
+	else
+		cancel_delayed_work(&tz->poll_queue);
+}
+
+static void monitor_thermal_zone(struct thermal_zone_device *tz)
+{
+	if (tz->mode != THERMAL_DEVICE_ENABLED)
+		thermal_zone_device_set_polling(tz, 0);
+	else if (tz->passive)
+		thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
+	else if (tz->polling_delay_jiffies)
+		thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
+}
+
+static void handle_non_critical_trips(struct thermal_zone_device *tz, int trip)
+{
+	tz->governor ? tz->governor->throttle(tz, trip) :
+		       def_governor->throttle(tz, trip);
+}
+
+void thermal_zone_device_critical(struct thermal_zone_device *tz)
+{
+	/*
+	 * poweroff_delay_ms must be a carefully profiled positive value.
+	 * Its a must for forced_emergency_poweroff_work to be scheduled.
+	 */
+	int poweroff_delay_ms = CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS;
+
+	dev_emerg(&tz->device, "%s: critical temperature reached, "
+		  "shutting down\n", tz->type);
+
+	hw_protection_shutdown("Temperature too high", poweroff_delay_ms);
+}
+EXPORT_SYMBOL(thermal_zone_device_critical);
+
+static void handle_critical_trips(struct thermal_zone_device *tz,
+				  int trip, int trip_temp, enum thermal_trip_type trip_type)
+{
+	/* If we have not crossed the trip_temp, we do not care. */
+	if (trip_temp <= 0 || tz->temperature < trip_temp)
+		return;
+
+	trace_thermal_zone_trip(tz, trip, trip_type);
+
+	if (trip_type == THERMAL_TRIP_HOT && tz->ops->hot)
+		tz->ops->hot(tz);
+	else if (trip_type == THERMAL_TRIP_CRITICAL)
+		tz->ops->critical(tz);
+}
+
+static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
+{
+	enum thermal_trip_type type;
+	int trip_temp, hyst = 0;
+
+	/* Ignore disabled trip points */
+	if (test_bit(trip, &tz->trips_disabled))
+		return;
+
+	tz->ops->get_trip_temp(tz, trip, &trip_temp);
+	tz->ops->get_trip_type(tz, trip, &type);
+	if (tz->ops->get_trip_hyst)
+		tz->ops->get_trip_hyst(tz, trip, &hyst);
+
+	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
+		if (tz->last_temperature < trip_temp &&
+		    tz->temperature >= trip_temp)
+			thermal_notify_tz_trip_up(tz->id, trip,
+						  tz->temperature);
+		if (tz->last_temperature >= trip_temp &&
+		    tz->temperature < (trip_temp - hyst))
+			thermal_notify_tz_trip_down(tz->id, trip,
+						    tz->temperature);
+	}
+
+	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
+		handle_critical_trips(tz, trip, trip_temp, type);
+	else
+		handle_non_critical_trips(tz, trip);
+}
+
+static void update_temperature(struct thermal_zone_device *tz)
+{
+	int temp, ret;
+
+	ret = __thermal_zone_get_temp(tz, &temp);
+	if (ret) {
+		if (ret != -EAGAIN)
+			dev_warn(&tz->device,
+				 "failed to read out thermal zone (%d)\n",
+				 ret);
+		return;
+	}
+
+	tz->last_temperature = tz->temperature;
+	tz->temperature = temp;
+
+	trace_thermal_temperature(tz);
+
+	thermal_genl_sampling_temp(tz->id, temp);
+}
+
+static void thermal_zone_device_init(struct thermal_zone_device *tz)
+{
+	struct thermal_instance *pos;
+	tz->temperature = THERMAL_TEMP_INVALID;
+	tz->prev_low_trip = -INT_MAX;
+	tz->prev_high_trip = INT_MAX;
+	list_for_each_entry(pos, &tz->thermal_instances, tz_node)
+		pos->initialized = false;
+}
+
+static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
+					enum thermal_device_mode mode)
+{
+	int ret = 0;
+
+	mutex_lock(&tz->lock);
+
+	/* do nothing if mode isn't changing */
+	if (mode == tz->mode) {
+		mutex_unlock(&tz->lock);
+
+		return ret;
+	}
+
+	if (tz->ops->change_mode)
+		ret = tz->ops->change_mode(tz, mode);
+
+	if (!ret)
+		tz->mode = mode;
+
+	mutex_unlock(&tz->lock);
+
+	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+	if (mode == THERMAL_DEVICE_ENABLED)
+		thermal_notify_tz_enable(tz->id);
+	else
+		thermal_notify_tz_disable(tz->id);
+
+	return ret;
+}
+
+int thermal_zone_device_enable(struct thermal_zone_device *tz)
+{
+	return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_ENABLED);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_enable);
+
+int thermal_zone_device_disable(struct thermal_zone_device *tz)
+{
+	return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_DISABLED);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_disable);
+
+int thermal_zone_device_is_enabled(struct thermal_zone_device *tz)
+{
+	lockdep_assert_held(&tz->lock);
+
+	return tz->mode == THERMAL_DEVICE_ENABLED;
+}
+
+void thermal_zone_device_update(struct thermal_zone_device *tz,
+				enum thermal_notify_event event)
+{
+	int count;
+
+	if (atomic_read(&in_suspend))
+		return;
+
+	if (WARN_ONCE(!tz->ops->get_temp, "'%s' must not be called without "
+		      "'get_temp' ops set\n", __func__))
+		return;
+
+	mutex_lock(&tz->lock);
+
+	if (!thermal_zone_device_is_enabled(tz))
+		goto out;
+
+	update_temperature(tz);
+
+	__thermal_zone_set_trips(tz);
+
+	tz->notify_event = event;
+
+	for (count = 0; count < tz->num_trips; count++)
+		handle_thermal_trip(tz, count);
+
+	monitor_thermal_zone(tz);
+out:
+	mutex_unlock(&tz->lock);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_update);
+
+static void thermal_zone_device_check(struct work_struct *work)
+{
+	struct thermal_zone_device *tz = container_of(work, struct
+						      thermal_zone_device,
+						      poll_queue.work);
+	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+}
+
+int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
+			      void *data)
+{
+	struct thermal_governor *gov;
+	int ret = 0;
+
+	mutex_lock(&thermal_governor_lock);
+	list_for_each_entry(gov, &thermal_governor_list, governor_list) {
+		ret = cb(gov, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_governor_lock);
+
+	return ret;
+}
+
+int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
+					      void *), void *data)
+{
+	struct thermal_cooling_device *cdev;
+	int ret = 0;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(cdev, &thermal_cdev_list, node) {
+		ret = cb(cdev, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return ret;
+}
+
+int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
+			  void *data)
+{
+	struct thermal_zone_device *tz;
+	int ret = 0;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		ret = cb(tz, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return ret;
+}
+
+struct thermal_zone_device *thermal_zone_get_by_id(int id)
+{
+	struct thermal_zone_device *tz, *match = NULL;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		if (tz->id == id) {
+			match = tz;
+			break;
+		}
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return match;
+}
+
+/*
+ * Device management section: cooling devices, zones devices, and binding
+ *
+ * Set of functions provided by the thermal core for:
+ * - cooling devices lifecycle: registration, unregistration,
+ *				binding, and unbinding.
+ * - thermal zone devices lifecycle: registration, unregistration,
+ *				     binding, and unbinding.
+ */
+
+/**
+ * thermal_zone_bind_cooling_device() - bind a cooling device to a thermal zone
+ * @tz:		pointer to struct thermal_zone_device
+ * @trip:	indicates which trip point the cooling devices is
+ *		associated with in this thermal zone.
+ * @cdev:	pointer to struct thermal_cooling_device
+ * @upper:	the Maximum cooling state for this trip point.
+ *		THERMAL_NO_LIMIT means no upper limit,
+ *		and the cooling device can be in max_state.
+ * @lower:	the Minimum cooling state can be used for this trip point.
+ *		THERMAL_NO_LIMIT means no lower limit,
+ *		and the cooling device can be in cooling state 0.
+ * @weight:	The weight of the cooling device to be bound to the
+ *		thermal zone. Use THERMAL_WEIGHT_DEFAULT for the
+ *		default value
+ *
+ * This interface function bind a thermal cooling device to the certain trip
+ * point of a thermal zone device.
+ * This function is usually called in the thermal zone device .bind callback.
+ *
+ * Return: 0 on success, the proper error value otherwise.
+ */
+int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+				     int trip,
+				     struct thermal_cooling_device *cdev,
+				     unsigned long upper, unsigned long lower,
+				     unsigned int weight)
+{
+	struct thermal_instance *dev;
+	struct thermal_instance *pos;
+	struct thermal_zone_device *pos1;
+	struct thermal_cooling_device *pos2;
+	int result;
+
+	if (trip >= tz->num_trips || trip < 0)
+		return -EINVAL;
+
+	list_for_each_entry(pos1, &thermal_tz_list, node) {
+		if (pos1 == tz)
+			break;
+	}
+	list_for_each_entry(pos2, &thermal_cdev_list, node) {
+		if (pos2 == cdev)
+			break;
+	}
+
+	if (tz != pos1 || cdev != pos2)
+		return -EINVAL;
+
+	/* lower default 0, upper default max_state */
+	lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
+	upper = upper == THERMAL_NO_LIMIT ? cdev->max_state : upper;
+
+	if (lower > upper || upper > cdev->max_state)
+		return -EINVAL;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	dev->tz = tz;
+	dev->cdev = cdev;
+	dev->trip = trip;
+	dev->upper = upper;
+	dev->lower = lower;
+	dev->target = THERMAL_NO_TARGET;
+	dev->weight = weight;
+
+	result = ida_alloc(&tz->ida, GFP_KERNEL);
+	if (result < 0)
+		goto free_mem;
+
+	dev->id = result;
+	sprintf(dev->name, "cdev%d", dev->id);
+	result =
+	    sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name);
+	if (result)
+		goto release_ida;
+
+	snprintf(dev->attr_name, sizeof(dev->attr_name), "cdev%d_trip_point",
+		 dev->id);
+	sysfs_attr_init(&dev->attr.attr);
+	dev->attr.attr.name = dev->attr_name;
+	dev->attr.attr.mode = 0444;
+	dev->attr.show = trip_point_show;
+	result = device_create_file(&tz->device, &dev->attr);
+	if (result)
+		goto remove_symbol_link;
+
+	snprintf(dev->weight_attr_name, sizeof(dev->weight_attr_name),
+		 "cdev%d_weight", dev->id);
+	sysfs_attr_init(&dev->weight_attr.attr);
+	dev->weight_attr.attr.name = dev->weight_attr_name;
+	dev->weight_attr.attr.mode = S_IWUSR | S_IRUGO;
+	dev->weight_attr.show = weight_show;
+	dev->weight_attr.store = weight_store;
+	result = device_create_file(&tz->device, &dev->weight_attr);
+	if (result)
+		goto remove_trip_file;
+
+	mutex_lock(&tz->lock);
+	mutex_lock(&cdev->lock);
+	list_for_each_entry(pos, &tz->thermal_instances, tz_node)
+		if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
+			result = -EEXIST;
+			break;
+		}
+	if (!result) {
+		list_add_tail(&dev->tz_node, &tz->thermal_instances);
+		list_add_tail(&dev->cdev_node, &cdev->thermal_instances);
+		atomic_set(&tz->need_update, 1);
+	}
+	mutex_unlock(&cdev->lock);
+	mutex_unlock(&tz->lock);
+
+	if (!result)
+		return 0;
+
+	device_remove_file(&tz->device, &dev->weight_attr);
+remove_trip_file:
+	device_remove_file(&tz->device, &dev->attr);
+remove_symbol_link:
+	sysfs_remove_link(&tz->device.kobj, dev->name);
+release_ida:
+	ida_free(&tz->ida, dev->id);
+free_mem:
+	kfree(dev);
+	return result;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_bind_cooling_device);
+
+/**
+ * thermal_zone_unbind_cooling_device() - unbind a cooling device from a
+ *					  thermal zone.
+ * @tz:		pointer to a struct thermal_zone_device.
+ * @trip:	indicates which trip point the cooling devices is
+ *		associated with in this thermal zone.
+ * @cdev:	pointer to a struct thermal_cooling_device.
+ *
+ * This interface function unbind a thermal cooling device from the certain
+ * trip point of a thermal zone device.
+ * This function is usually called in the thermal zone device .unbind callback.
+ *
+ * Return: 0 on success, the proper error value otherwise.
+ */
+int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
+				       int trip,
+				       struct thermal_cooling_device *cdev)
+{
+	struct thermal_instance *pos, *next;
+
+	mutex_lock(&tz->lock);
+	mutex_lock(&cdev->lock);
+	list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
+		if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
+			list_del(&pos->tz_node);
+			list_del(&pos->cdev_node);
+			mutex_unlock(&cdev->lock);
+			mutex_unlock(&tz->lock);
+			goto unbind;
+		}
+	}
+	mutex_unlock(&cdev->lock);
+	mutex_unlock(&tz->lock);
+
+	return -ENODEV;
+
+unbind:
+	device_remove_file(&tz->device, &pos->weight_attr);
+	device_remove_file(&tz->device, &pos->attr);
+	sysfs_remove_link(&tz->device.kobj, pos->name);
+	ida_free(&tz->ida, pos->id);
+	kfree(pos);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_unbind_cooling_device);
+
+static void thermal_release(struct device *dev)
+{
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+
+	if (!strncmp(dev_name(dev), "thermal_zone",
+		     sizeof("thermal_zone") - 1)) {
+		tz = to_thermal_zone(dev);
+		thermal_zone_destroy_device_groups(tz);
+		kfree(tz);
+	} else if (!strncmp(dev_name(dev), "cooling_device",
+			    sizeof("cooling_device") - 1)) {
+		cdev = to_cooling_device(dev);
+		kfree(cdev);
+	}
+}
+
+static struct class thermal_class = {
+	.name = "thermal",
+	.dev_release = thermal_release,
+};
+
+static inline
+void print_bind_err_msg(struct thermal_zone_device *tz,
+			struct thermal_cooling_device *cdev, int ret)
+{
+	dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n",
+		tz->type, cdev->type, ret);
+}
+
+static void __bind(struct thermal_zone_device *tz, int mask,
+		   struct thermal_cooling_device *cdev,
+		   unsigned long *limits,
+		   unsigned int weight)
+{
+	int i, ret;
+
+	for (i = 0; i < tz->num_trips; i++) {
+		if (mask & (1 << i)) {
+			unsigned long upper, lower;
+
+			upper = THERMAL_NO_LIMIT;
+			lower = THERMAL_NO_LIMIT;
+			if (limits) {
+				lower = limits[i * 2];
+				upper = limits[i * 2 + 1];
+			}
+			ret = thermal_zone_bind_cooling_device(tz, i, cdev,
+							       upper, lower,
+							       weight);
+			if (ret)
+				print_bind_err_msg(tz, cdev, ret);
+		}
+	}
+}
+
+static void bind_cdev(struct thermal_cooling_device *cdev)
+{
+	int i, ret;
+	const struct thermal_zone_params *tzp;
+	struct thermal_zone_device *pos = NULL;
+
+	mutex_lock(&thermal_list_lock);
+
+	list_for_each_entry(pos, &thermal_tz_list, node) {
+		if (!pos->tzp && !pos->ops->bind)
+			continue;
+
+		if (pos->ops->bind) {
+			ret = pos->ops->bind(pos, cdev);
+			if (ret)
+				print_bind_err_msg(pos, cdev, ret);
+			continue;
+		}
+
+		tzp = pos->tzp;
+		if (!tzp || !tzp->tbp)
+			continue;
+
+		for (i = 0; i < tzp->num_tbps; i++) {
+			if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
+				continue;
+			if (tzp->tbp[i].match(pos, cdev))
+				continue;
+			tzp->tbp[i].cdev = cdev;
+			__bind(pos, tzp->tbp[i].trip_mask, cdev,
+			       tzp->tbp[i].binding_limits,
+			       tzp->tbp[i].weight);
+		}
+	}
+
+	mutex_unlock(&thermal_list_lock);
+}
+
+/**
+ * __thermal_cooling_device_register() - register a new thermal cooling device
+ * @np:		a pointer to a device tree node.
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ * It also gives the opportunity to link the cooling device to a device tree
+ * node, so that it can be bound to a thermal zone created out of device tree.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+static struct thermal_cooling_device *
+__thermal_cooling_device_register(struct device_node *np,
+				  const char *type, void *devdata,
+				  const struct thermal_cooling_device_ops *ops)
+{
+	struct thermal_cooling_device *cdev;
+	struct thermal_zone_device *pos = NULL;
+	int id, ret;
+
+	if (!ops || !ops->get_max_state || !ops->get_cur_state ||
+	    !ops->set_cur_state)
+		return ERR_PTR(-EINVAL);
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return ERR_PTR(-ENOMEM);
+
+	ret = ida_alloc(&thermal_cdev_ida, GFP_KERNEL);
+	if (ret < 0)
+		goto out_kfree_cdev;
+	cdev->id = ret;
+	id = ret;
+
+	cdev->type = kstrdup(type ? type : "", GFP_KERNEL);
+	if (!cdev->type) {
+		ret = -ENOMEM;
+		goto out_ida_remove;
+	}
+
+	mutex_init(&cdev->lock);
+	INIT_LIST_HEAD(&cdev->thermal_instances);
+	cdev->np = np;
+	cdev->ops = ops;
+	cdev->updated = false;
+	cdev->device.class = &thermal_class;
+	cdev->devdata = devdata;
+
+	ret = cdev->ops->get_max_state(cdev, &cdev->max_state);
+	if (ret) {
+		kfree(cdev->type);
+		goto out_ida_remove;
+	}
+
+	thermal_cooling_device_setup_sysfs(cdev);
+
+	ret = dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
+	if (ret) {
+		kfree(cdev->type);
+		thermal_cooling_device_destroy_sysfs(cdev);
+		goto out_ida_remove;
+	}
+
+	ret = device_register(&cdev->device);
+	if (ret)
+		goto out_kfree_type;
+
+	/* Add 'this' new cdev to the global cdev list */
+	mutex_lock(&thermal_list_lock);
+	list_add(&cdev->node, &thermal_cdev_list);
+	mutex_unlock(&thermal_list_lock);
+
+	/* Update binding information for 'this' new cdev */
+	bind_cdev(cdev);
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(pos, &thermal_tz_list, node)
+		if (atomic_cmpxchg(&pos->need_update, 1, 0))
+			thermal_zone_device_update(pos,
+						   THERMAL_EVENT_UNSPECIFIED);
+	mutex_unlock(&thermal_list_lock);
+
+	return cdev;
+
+out_kfree_type:
+	thermal_cooling_device_destroy_sysfs(cdev);
+	kfree(cdev->type);
+	put_device(&cdev->device);
+
+	/* thermal_release() takes care of the rest */
+	cdev = NULL;
+out_ida_remove:
+	ida_free(&thermal_cdev_ida, id);
+out_kfree_cdev:
+	kfree(cdev);
+	return ERR_PTR(ret);
+}
+
+/**
+ * thermal_cooling_device_register() - register a new thermal cooling device
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_cooling_device_register(const char *type, void *devdata,
+				const struct thermal_cooling_device_ops *ops)
+{
+	return __thermal_cooling_device_register(NULL, type, devdata, ops);
+}
+EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
+
+/**
+ * thermal_of_cooling_device_register() - register an OF thermal cooling device
+ * @np:		a pointer to a device tree node.
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This function will register a cooling device with device tree node reference.
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np,
+				   const char *type, void *devdata,
+				   const struct thermal_cooling_device_ops *ops)
+{
+	return __thermal_cooling_device_register(np, type, devdata, ops);
+}
+EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register);
+
+static void thermal_cooling_device_release(struct device *dev, void *res)
+{
+	thermal_cooling_device_unregister(
+				*(struct thermal_cooling_device **)res);
+}
+
+/**
+ * devm_thermal_of_cooling_device_register() - register an OF thermal cooling
+ *					       device
+ * @dev:	a valid struct device pointer of a sensor device.
+ * @np:		a pointer to a device tree node.
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:	standard thermal cooling devices callbacks.
+ *
+ * This function will register a cooling device with device tree node reference.
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+devm_thermal_of_cooling_device_register(struct device *dev,
+				struct device_node *np,
+				char *type, void *devdata,
+				const struct thermal_cooling_device_ops *ops)
+{
+	struct thermal_cooling_device **ptr, *tcd;
+
+	ptr = devres_alloc(thermal_cooling_device_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	tcd = __thermal_cooling_device_register(np, type, devdata, ops);
+	if (IS_ERR(tcd)) {
+		devres_free(ptr);
+		return tcd;
+	}
+
+	*ptr = tcd;
+	devres_add(dev, ptr);
+
+	return tcd;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_of_cooling_device_register);
+
+static void __unbind(struct thermal_zone_device *tz, int mask,
+		     struct thermal_cooling_device *cdev)
+{
+	int i;
+
+	for (i = 0; i < tz->num_trips; i++)
+		if (mask & (1 << i))
+			thermal_zone_unbind_cooling_device(tz, i, cdev);
+}
+
+/**
+ * thermal_cooling_device_unregister - removes a thermal cooling device
+ * @cdev:	the thermal cooling device to remove.
+ *
+ * thermal_cooling_device_unregister() must be called when a registered
+ * thermal cooling device is no longer needed.
+ */
+void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
+{
+	int i;
+	const struct thermal_zone_params *tzp;
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *pos = NULL;
+
+	if (!cdev)
+		return;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(pos, &thermal_cdev_list, node)
+		if (pos == cdev)
+			break;
+	if (pos != cdev) {
+		/* thermal cooling device not found */
+		mutex_unlock(&thermal_list_lock);
+		return;
+	}
+	list_del(&cdev->node);
+
+	/* Unbind all thermal zones associated with 'this' cdev */
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		if (tz->ops->unbind) {
+			tz->ops->unbind(tz, cdev);
+			continue;
+		}
+
+		if (!tz->tzp || !tz->tzp->tbp)
+			continue;
+
+		tzp = tz->tzp;
+		for (i = 0; i < tzp->num_tbps; i++) {
+			if (tzp->tbp[i].cdev == cdev) {
+				__unbind(tz, tzp->tbp[i].trip_mask, cdev);
+				tzp->tbp[i].cdev = NULL;
+			}
+		}
+	}
+
+	mutex_unlock(&thermal_list_lock);
+
+	ida_free(&thermal_cdev_ida, cdev->id);
+	device_del(&cdev->device);
+	thermal_cooling_device_destroy_sysfs(cdev);
+	kfree(cdev->type);
+	put_device(&cdev->device);
+}
+EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
+
+static void bind_tz(struct thermal_zone_device *tz)
+{
+	int i, ret;
+	struct thermal_cooling_device *pos = NULL;
+	const struct thermal_zone_params *tzp = tz->tzp;
+
+	if (!tzp && !tz->ops->bind)
+		return;
+
+	mutex_lock(&thermal_list_lock);
+
+	/* If there is ops->bind, try to use ops->bind */
+	if (tz->ops->bind) {
+		list_for_each_entry(pos, &thermal_cdev_list, node) {
+			ret = tz->ops->bind(tz, pos);
+			if (ret)
+				print_bind_err_msg(tz, pos, ret);
+		}
+		goto exit;
+	}
+
+	if (!tzp || !tzp->tbp)
+		goto exit;
+
+	list_for_each_entry(pos, &thermal_cdev_list, node) {
+		for (i = 0; i < tzp->num_tbps; i++) {
+			if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
+				continue;
+			if (tzp->tbp[i].match(tz, pos))
+				continue;
+			tzp->tbp[i].cdev = pos;
+			__bind(tz, tzp->tbp[i].trip_mask, pos,
+			       tzp->tbp[i].binding_limits,
+			       tzp->tbp[i].weight);
+		}
+	}
+exit:
+	mutex_unlock(&thermal_list_lock);
+}
+
+static void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms)
+{
+	*delay_jiffies = msecs_to_jiffies(delay_ms);
+	if (delay_ms > 1000)
+		*delay_jiffies = round_jiffies(*delay_jiffies);
+}
+
+/**
+ * thermal_zone_device_register_with_trips() - register a new thermal zone device
+ * @type:	the thermal zone device type
+ * @trips:	a pointer to an array of thermal trips
+ * @num_trips:	the number of trip points the thermal zone support
+ * @mask:	a bit string indicating the writeablility of trip points
+ * @devdata:	private device data
+ * @ops:	standard thermal zone device callbacks
+ * @tzp:	thermal zone platform parameters
+ * @passive_delay: number of milliseconds to wait between polls when
+ *		   performing passive cooling
+ * @polling_delay: number of milliseconds to wait between polls when checking
+ *		   whether trip points have been crossed (0 for interrupt
+ *		   driven systems)
+ *
+ * This interface function adds a new thermal zone device (sensor) to
+ * /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+ * thermal cooling devices registered at the same time.
+ * thermal_zone_device_unregister() must be called when the device is no
+ * longer needed. The passive cooling depends on the .get_trend() return value.
+ *
+ * Return: a pointer to the created struct thermal_zone_device or an
+ * in case of error, an ERR_PTR. Caller must check return value with
+ * IS_ERR*() helpers.
+ */
+struct thermal_zone_device *
+thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *trips, int num_trips, int mask,
+					void *devdata, struct thermal_zone_device_ops *ops,
+					struct thermal_zone_params *tzp, int passive_delay,
+					int polling_delay)
+{
+	struct thermal_zone_device *tz;
+	enum thermal_trip_type trip_type;
+	int trip_temp;
+	int id;
+	int result;
+	int count;
+	struct thermal_governor *governor;
+
+	if (!type || strlen(type) == 0) {
+		pr_err("No thermal zone type defined\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (strlen(type) >= THERMAL_NAME_LENGTH) {
+		pr_err("Thermal zone name (%s) too long, should be under %d chars\n",
+		       type, THERMAL_NAME_LENGTH);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/*
+	 * Max trip count can't exceed 31 as the "mask >> num_trips" condition.
+	 * For example, shifting by 32 will result in compiler warning:
+	 * warning: right shift count >= width of type [-Wshift-count- overflow]
+	 *
+	 * Also "mask >> num_trips" will always be true with 32 bit shift.
+	 * E.g. mask = 0x80000000 for trip id 31 to be RW. Then
+	 * mask >> 32 = 0x80000000
+	 * This will result in failure for the below condition.
+	 *
+	 * Check will be true when the bit 31 of the mask is set.
+	 * 32 bit shift will cause overflow of 4 byte integer.
+	 */
+	if (num_trips > (BITS_PER_TYPE(int) - 1) || num_trips < 0 || mask >> num_trips) {
+		pr_err("Incorrect number of thermal trips\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!ops) {
+		pr_err("Thermal zone device ops not defined\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (num_trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
+		return ERR_PTR(-EINVAL);
+
+	tz = kzalloc(sizeof(*tz), GFP_KERNEL);
+	if (!tz)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&tz->thermal_instances);
+	ida_init(&tz->ida);
+	mutex_init(&tz->lock);
+	id = ida_alloc(&thermal_tz_ida, GFP_KERNEL);
+	if (id < 0) {
+		result = id;
+		goto free_tz;
+	}
+
+	tz->id = id;
+	strscpy(tz->type, type, sizeof(tz->type));
+
+	if (!ops->critical)
+		ops->critical = thermal_zone_device_critical;
+
+	tz->ops = ops;
+	tz->tzp = tzp;
+	tz->device.class = &thermal_class;
+	tz->devdata = devdata;
+	tz->trips = trips;
+	tz->num_trips = num_trips;
+
+	thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
+	thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
+
+	/* sys I/F */
+	/* Add nodes that are always present via .groups */
+	result = thermal_zone_create_device_groups(tz, mask);
+	if (result)
+		goto remove_id;
+
+	/* A new thermal zone needs to be updated anyway. */
+	atomic_set(&tz->need_update, 1);
+
+	result = dev_set_name(&tz->device, "thermal_zone%d", tz->id);
+	if (result) {
+		thermal_zone_destroy_device_groups(tz);
+		goto remove_id;
+	}
+	result = device_register(&tz->device);
+	if (result)
+		goto release_device;
+
+	for (count = 0; count < num_trips; count++) {
+		if (tz->ops->get_trip_type(tz, count, &trip_type) ||
+		    tz->ops->get_trip_temp(tz, count, &trip_temp) ||
+		    !trip_temp)
+			set_bit(count, &tz->trips_disabled);
+	}
+
+	/* Update 'this' zone's governor information */
+	mutex_lock(&thermal_governor_lock);
+
+	if (tz->tzp)
+		governor = __find_governor(tz->tzp->governor_name);
+	else
+		governor = def_governor;
+
+	result = thermal_set_governor(tz, governor);
+	if (result) {
+		mutex_unlock(&thermal_governor_lock);
+		goto unregister;
+	}
+
+	mutex_unlock(&thermal_governor_lock);
+
+	if (!tz->tzp || !tz->tzp->no_hwmon) {
+		result = thermal_add_hwmon_sysfs(tz);
+		if (result)
+			goto unregister;
+	}
+
+	mutex_lock(&thermal_list_lock);
+	list_add_tail(&tz->node, &thermal_tz_list);
+	mutex_unlock(&thermal_list_lock);
+
+	/* Bind cooling devices for this zone */
+	bind_tz(tz);
+
+	INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check);
+
+	thermal_zone_device_init(tz);
+	/* Update the new thermal zone and mark it as already updated. */
+	if (atomic_cmpxchg(&tz->need_update, 1, 0))
+		thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+	thermal_notify_tz_create(tz->id, tz->type);
+
+	return tz;
+
+unregister:
+	device_del(&tz->device);
+release_device:
+	put_device(&tz->device);
+	tz = NULL;
+remove_id:
+	ida_free(&thermal_tz_ida, id);
+free_tz:
+	kfree(tz);
+	return ERR_PTR(result);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_register_with_trips);
+
+struct thermal_zone_device *thermal_zone_device_register(const char *type, int ntrips, int mask,
+							 void *devdata, struct thermal_zone_device_ops *ops,
+							 struct thermal_zone_params *tzp, int passive_delay,
+							 int polling_delay)
+{
+	return thermal_zone_device_register_with_trips(type, NULL, ntrips, mask,
+						       devdata, ops, tzp,
+						       passive_delay, polling_delay);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_register);
+
+/**
+ * thermal_zone_device_unregister - removes the registered thermal zone device
+ * @tz: the thermal zone device to remove
+ */
+void thermal_zone_device_unregister(struct thermal_zone_device *tz)
+{
+	int i, tz_id;
+	const struct thermal_zone_params *tzp;
+	struct thermal_cooling_device *cdev;
+	struct thermal_zone_device *pos = NULL;
+
+	if (!tz)
+		return;
+
+	tzp = tz->tzp;
+	tz_id = tz->id;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(pos, &thermal_tz_list, node)
+		if (pos == tz)
+			break;
+	if (pos != tz) {
+		/* thermal zone device not found */
+		mutex_unlock(&thermal_list_lock);
+		return;
+	}
+	list_del(&tz->node);
+
+	/* Unbind all cdevs associated with 'this' thermal zone */
+	list_for_each_entry(cdev, &thermal_cdev_list, node) {
+		if (tz->ops->unbind) {
+			tz->ops->unbind(tz, cdev);
+			continue;
+		}
+
+		if (!tzp || !tzp->tbp)
+			break;
+
+		for (i = 0; i < tzp->num_tbps; i++) {
+			if (tzp->tbp[i].cdev == cdev) {
+				__unbind(tz, tzp->tbp[i].trip_mask, cdev);
+				tzp->tbp[i].cdev = NULL;
+			}
+		}
+	}
+
+	mutex_unlock(&thermal_list_lock);
+
+	cancel_delayed_work_sync(&tz->poll_queue);
+
+	thermal_set_governor(tz, NULL);
+
+	thermal_remove_hwmon_sysfs(tz);
+	ida_free(&thermal_tz_ida, tz->id);
+	ida_destroy(&tz->ida);
+	mutex_destroy(&tz->lock);
+	device_unregister(&tz->device);
+
+	thermal_notify_tz_delete(tz_id);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_unregister);
+
+/**
+ * thermal_zone_get_zone_by_name() - search for a zone and returns its ref
+ * @name: thermal zone name to fetch the temperature
+ *
+ * When only one zone is found with the passed name, returns a reference to it.
+ *
+ * Return: On success returns a reference to an unique thermal zone with
+ * matching name equals to @name, an ERR_PTR otherwise (-EINVAL for invalid
+ * paramenters, -ENODEV for not found and -EEXIST for multiple matches).
+ */
+struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name)
+{
+	struct thermal_zone_device *pos = NULL, *ref = ERR_PTR(-EINVAL);
+	unsigned int found = 0;
+
+	if (!name)
+		goto exit;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(pos, &thermal_tz_list, node)
+		if (!strncasecmp(name, pos->type, THERMAL_NAME_LENGTH)) {
+			found++;
+			ref = pos;
+		}
+	mutex_unlock(&thermal_list_lock);
+
+	/* nothing has been found, thus an error code for it */
+	if (found == 0)
+		ref = ERR_PTR(-ENODEV);
+	else if (found > 1)
+	/* Success only when an unique zone is found */
+		ref = ERR_PTR(-EEXIST);
+
+exit:
+	return ref;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
+
+static int thermal_pm_notify(struct notifier_block *nb,
+			     unsigned long mode, void *_unused)
+{
+	struct thermal_zone_device *tz;
+
+	switch (mode) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_RESTORE_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		atomic_set(&in_suspend, 1);
+		break;
+	case PM_POST_HIBERNATION:
+	case PM_POST_RESTORE:
+	case PM_POST_SUSPEND:
+		atomic_set(&in_suspend, 0);
+		list_for_each_entry(tz, &thermal_tz_list, node) {
+			thermal_zone_device_init(tz);
+			thermal_zone_device_update(tz,
+						   THERMAL_EVENT_UNSPECIFIED);
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block thermal_pm_nb = {
+	.notifier_call = thermal_pm_notify,
+};
+
+static int __init thermal_init(void)
+{
+	int result;
+
+	result = thermal_netlink_init();
+	if (result)
+		goto error;
+
+	result = thermal_register_governors();
+	if (result)
+		goto error;
+
+	result = class_register(&thermal_class);
+	if (result)
+		goto unregister_governors;
+
+	result = register_pm_notifier(&thermal_pm_nb);
+	if (result)
+		pr_warn("Thermal: Can not register suspend notifier, return %d\n",
+			result);
+
+	return 0;
+
+unregister_governors:
+	thermal_unregister_governors();
+error:
+	ida_destroy(&thermal_tz_ida);
+	ida_destroy(&thermal_cdev_ida);
+	mutex_destroy(&thermal_list_lock);
+	mutex_destroy(&thermal_governor_lock);
+	return result;
+}
+postcore_initcall(thermal_init);
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
new file mode 100644
index 000000000..1571917bd
--- /dev/null
+++ b/drivers/thermal/thermal_core.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  thermal_core.h
+ *
+ *  Copyright (C) 2012  Intel Corp
+ *  Author: Durgadoss R <durgadoss.r@intel.com>
+ */
+
+#ifndef __THERMAL_CORE_H__
+#define __THERMAL_CORE_H__
+
+#include <linux/device.h>
+#include <linux/thermal.h>
+
+#include "thermal_netlink.h"
+
+/* Default Thermal Governor */
+#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
+#define DEFAULT_THERMAL_GOVERNOR       "step_wise"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
+#define DEFAULT_THERMAL_GOVERNOR       "fair_share"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
+#define DEFAULT_THERMAL_GOVERNOR       "user_space"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
+#define DEFAULT_THERMAL_GOVERNOR       "power_allocator"
+#endif
+
+/* Initial state of a cooling device during binding */
+#define THERMAL_NO_TARGET -1UL
+
+/* Init section thermal table */
+extern struct thermal_governor *__governor_thermal_table[];
+extern struct thermal_governor *__governor_thermal_table_end[];
+
+#define THERMAL_TABLE_ENTRY(table, name)			\
+	static typeof(name) *__thermal_table_entry_##name	\
+	__used __section("__" #table "_thermal_table") = &name
+
+#define THERMAL_GOVERNOR_DECLARE(name)	THERMAL_TABLE_ENTRY(governor, name)
+
+#define for_each_governor_table(__governor)		\
+	for (__governor = __governor_thermal_table;	\
+	     __governor < __governor_thermal_table_end;	\
+	     __governor++)
+
+int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
+			  void *);
+
+int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
+					      void *), void *);
+
+int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
+			      void *thermal_governor);
+
+struct thermal_zone_device *thermal_zone_get_by_id(int id);
+
+struct thermal_attr {
+	struct device_attribute attr;
+	char name[THERMAL_NAME_LENGTH];
+};
+
+static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
+{
+	return cdev->ops->get_requested_power && cdev->ops->state2power &&
+		cdev->ops->power2state;
+}
+
+void thermal_cdev_update(struct thermal_cooling_device *);
+void __thermal_cdev_update(struct thermal_cooling_device *cdev);
+
+int get_tz_trend(struct thermal_zone_device *tz, int trip);
+
+struct thermal_instance *
+get_thermal_instance(struct thermal_zone_device *tz,
+		     struct thermal_cooling_device *cdev,
+		     int trip);
+
+/*
+ * This structure is used to describe the behavior of
+ * a certain cooling device on a certain trip point
+ * in a certain thermal zone
+ */
+struct thermal_instance {
+	int id;
+	char name[THERMAL_NAME_LENGTH];
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+	int trip;
+	bool initialized;
+	unsigned long upper;	/* Highest cooling state for this trip point */
+	unsigned long lower;	/* Lowest cooling state for this trip point */
+	unsigned long target;	/* expected cooling state */
+	char attr_name[THERMAL_NAME_LENGTH];
+	struct device_attribute attr;
+	char weight_attr_name[THERMAL_NAME_LENGTH];
+	struct device_attribute weight_attr;
+	struct list_head tz_node; /* node in tz->thermal_instances */
+	struct list_head cdev_node; /* node in cdev->thermal_instances */
+	unsigned int weight; /* The weight of the cooling device */
+};
+
+#define to_thermal_zone(_dev) \
+	container_of(_dev, struct thermal_zone_device, device)
+
+#define to_cooling_device(_dev)	\
+	container_of(_dev, struct thermal_cooling_device, device)
+
+int thermal_register_governor(struct thermal_governor *);
+void thermal_unregister_governor(struct thermal_governor *);
+int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
+int thermal_build_list_of_policies(char *buf);
+
+/* Helpers */
+void thermal_zone_set_trips(struct thermal_zone_device *tz);
+void __thermal_zone_set_trips(struct thermal_zone_device *tz);
+int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
+
+/* sysfs I/F */
+int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
+void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
+void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
+void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev);
+/* used only at binding time */
+ssize_t trip_point_show(struct device *, struct device_attribute *, char *);
+ssize_t weight_show(struct device *, struct device_attribute *, char *);
+ssize_t weight_store(struct device *, struct device_attribute *, const char *,
+		     size_t);
+
+#ifdef CONFIG_THERMAL_STATISTICS
+void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
+					 unsigned long new_state);
+#else
+static inline void
+thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
+				    unsigned long new_state) {}
+#endif /* CONFIG_THERMAL_STATISTICS */
+
+/* device tree support */
+#ifdef CONFIG_THERMAL_OF
+int of_thermal_get_ntrips(struct thermal_zone_device *);
+bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
+const struct thermal_trip *
+of_thermal_get_trip_points(struct thermal_zone_device *);
+#else
+static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz,
+					    int trip)
+{
+	return false;
+}
+static inline const struct thermal_trip *
+of_thermal_get_trip_points(struct thermal_zone_device *tz)
+{
+	return NULL;
+}
+#endif
+
+int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
+
+#endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
new file mode 100644
index 000000000..fca0b2357
--- /dev/null
+++ b/drivers/thermal/thermal_helpers.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  thermal_helpers.c - helper functions to handle thermal devices
+ *
+ *  Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com>
+ *
+ *  Highly based on original thermal_core.c
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#include <trace/events/thermal.h>
+
+#include "thermal_core.h"
+
+int get_tz_trend(struct thermal_zone_device *tz, int trip)
+{
+	enum thermal_trend trend;
+
+	if (tz->emul_temperature || !tz->ops->get_trend ||
+	    tz->ops->get_trend(tz, trip, &trend)) {
+		if (tz->temperature > tz->last_temperature)
+			trend = THERMAL_TREND_RAISING;
+		else if (tz->temperature < tz->last_temperature)
+			trend = THERMAL_TREND_DROPPING;
+		else
+			trend = THERMAL_TREND_STABLE;
+	}
+
+	return trend;
+}
+
+struct thermal_instance *
+get_thermal_instance(struct thermal_zone_device *tz,
+		     struct thermal_cooling_device *cdev, int trip)
+{
+	struct thermal_instance *pos = NULL;
+	struct thermal_instance *target_instance = NULL;
+
+	mutex_lock(&tz->lock);
+	mutex_lock(&cdev->lock);
+
+	list_for_each_entry(pos, &tz->thermal_instances, tz_node) {
+		if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
+			target_instance = pos;
+			break;
+		}
+	}
+
+	mutex_unlock(&cdev->lock);
+	mutex_unlock(&tz->lock);
+
+	return target_instance;
+}
+EXPORT_SYMBOL(get_thermal_instance);
+
+int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	int ret = -EINVAL;
+	int count;
+	int crit_temp = INT_MAX;
+	enum thermal_trip_type type;
+
+	lockdep_assert_held(&tz->lock);
+
+	if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
+		return -EINVAL;
+
+	ret = tz->ops->get_temp(tz, temp);
+
+	if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) {
+		for (count = 0; count < tz->num_trips; count++) {
+			ret = tz->ops->get_trip_type(tz, count, &type);
+			if (!ret && type == THERMAL_TRIP_CRITICAL) {
+				ret = tz->ops->get_trip_temp(tz, count,
+						&crit_temp);
+				break;
+			}
+		}
+
+		/*
+		 * Only allow emulating a temperature when the real temperature
+		 * is below the critical temperature so that the emulation code
+		 * cannot hide critical conditions.
+		 */
+		if (!ret && *temp < crit_temp)
+			*temp = tz->emul_temperature;
+	}
+
+	return ret;
+}
+
+/**
+ * thermal_zone_get_temp() - returns the temperature of a thermal zone
+ * @tz: a valid pointer to a struct thermal_zone_device
+ * @temp: a valid pointer to where to store the resulting temperature.
+ *
+ * When a valid thermal zone reference is passed, it will fetch its
+ * temperature and fill @temp.
+ *
+ * Return: On success returns 0, an error code otherwise
+ */
+int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	int ret;
+
+	mutex_lock(&tz->lock);
+
+	if (device_is_registered(&tz->device))
+		ret = __thermal_zone_get_temp(tz, temp);
+	else
+		ret = -ENODEV;
+
+	mutex_unlock(&tz->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
+
+void __thermal_zone_set_trips(struct thermal_zone_device *tz)
+{
+	int low = -INT_MAX;
+	int high = INT_MAX;
+	int trip_temp, hysteresis;
+	int i, ret;
+
+	lockdep_assert_held(&tz->lock);
+
+	if (!tz->ops->set_trips || !tz->ops->get_trip_hyst)
+		return;
+
+	for (i = 0; i < tz->num_trips; i++) {
+		int trip_low;
+
+		tz->ops->get_trip_temp(tz, i, &trip_temp);
+		tz->ops->get_trip_hyst(tz, i, &hysteresis);
+
+		trip_low = trip_temp - hysteresis;
+
+		if (trip_low < tz->temperature && trip_low > low)
+			low = trip_low;
+
+		if (trip_temp > tz->temperature && trip_temp < high)
+			high = trip_temp;
+	}
+
+	/* No need to change trip points */
+	if (tz->prev_low_trip == low && tz->prev_high_trip == high)
+		return;
+
+	tz->prev_low_trip = low;
+	tz->prev_high_trip = high;
+
+	dev_dbg(&tz->device,
+		"new temperature boundaries: %d < x < %d\n", low, high);
+
+	/*
+	 * Set a temperature window. When this window is left the driver
+	 * must inform the thermal core via thermal_zone_device_update.
+	 */
+	ret = tz->ops->set_trips(tz, low, high);
+	if (ret)
+		dev_err(&tz->device, "Failed to set trips: %d\n", ret);
+}
+
+/**
+ * thermal_zone_set_trips - Computes the next trip points for the driver
+ * @tz: a pointer to a thermal zone device structure
+ *
+ * The function computes the next temperature boundaries by browsing
+ * the trip points. The result is the closer low and high trip points
+ * to the current temperature. These values are passed to the backend
+ * driver to let it set its own notification mechanism (usually an
+ * interrupt).
+ *
+ * It does not return a value
+ */
+void thermal_zone_set_trips(struct thermal_zone_device *tz)
+{
+	mutex_lock(&tz->lock);
+	__thermal_zone_set_trips(tz);
+	mutex_unlock(&tz->lock);
+}
+
+static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
+				       int target)
+{
+	if (cdev->ops->set_cur_state(cdev, target))
+		return;
+
+	thermal_notify_cdev_state_update(cdev->id, target);
+	thermal_cooling_device_stats_update(cdev, target);
+}
+
+void __thermal_cdev_update(struct thermal_cooling_device *cdev)
+{
+	struct thermal_instance *instance;
+	unsigned long target = 0;
+
+	/* Make sure cdev enters the deepest cooling state */
+	list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
+		dev_dbg(&cdev->device, "zone%d->target=%lu\n",
+			instance->tz->id, instance->target);
+		if (instance->target == THERMAL_NO_TARGET)
+			continue;
+		if (instance->target > target)
+			target = instance->target;
+	}
+
+	thermal_cdev_set_cur_state(cdev, target);
+
+	trace_cdev_update(cdev, target);
+	dev_dbg(&cdev->device, "set to state %lu\n", target);
+}
+
+/**
+ * thermal_cdev_update - update cooling device state if needed
+ * @cdev:	pointer to struct thermal_cooling_device
+ *
+ * Update the cooling device state if there is a need.
+ */
+void thermal_cdev_update(struct thermal_cooling_device *cdev)
+{
+	mutex_lock(&cdev->lock);
+	if (!cdev->updated) {
+		__thermal_cdev_update(cdev);
+		cdev->updated = true;
+	}
+	mutex_unlock(&cdev->lock);
+}
+
+/**
+ * thermal_zone_get_slope - return the slope attribute of the thermal zone
+ * @tz: thermal zone device with the slope attribute
+ *
+ * Return: If the thermal zone device has a slope attribute, return it, else
+ * return 1.
+ */
+int thermal_zone_get_slope(struct thermal_zone_device *tz)
+{
+	if (tz && tz->tzp)
+		return tz->tzp->slope;
+	return 1;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
+
+/**
+ * thermal_zone_get_offset - return the offset attribute of the thermal zone
+ * @tz: thermal zone device with the offset attribute
+ *
+ * Return: If the thermal zone device has a offset attribute, return it, else
+ * return 0.
+ */
+int thermal_zone_get_offset(struct thermal_zone_device *tz)
+{
+	if (tz && tz->tzp)
+		return tz->tzp->offset;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
new file mode 100644
index 000000000..f53f4ceb6
--- /dev/null
+++ b/drivers/thermal/thermal_hwmon.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  thermal_hwmon.c - Generic Thermal Management hwmon support.
+ *
+ *  Code based on Intel thermal_core.c. Copyrights of the original code:
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ *
+ *  Copyright (C) 2013 Texas Instruments
+ *  Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/hwmon.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_hwmon.h"
+
+/* hwmon sys I/F */
+/* thermal zone devices with the same type share one hwmon device */
+struct thermal_hwmon_device {
+	char type[THERMAL_NAME_LENGTH];
+	struct device *device;
+	int count;
+	struct list_head tz_list;
+	struct list_head node;
+};
+
+struct thermal_hwmon_attr {
+	struct device_attribute attr;
+	char name[16];
+};
+
+/* one temperature input for each thermal zone */
+struct thermal_hwmon_temp {
+	struct list_head hwmon_node;
+	struct thermal_zone_device *tz;
+	struct thermal_hwmon_attr temp_input;	/* hwmon sys attr */
+	struct thermal_hwmon_attr temp_crit;	/* hwmon sys attr */
+};
+
+static LIST_HEAD(thermal_hwmon_list);
+
+static DEFINE_MUTEX(thermal_hwmon_list_lock);
+
+static ssize_t
+temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int temperature;
+	int ret;
+	struct thermal_hwmon_attr *hwmon_attr
+			= container_of(attr, struct thermal_hwmon_attr, attr);
+	struct thermal_hwmon_temp *temp
+			= container_of(hwmon_attr, struct thermal_hwmon_temp,
+				       temp_input);
+	struct thermal_zone_device *tz = temp->tz;
+
+	ret = thermal_zone_get_temp(tz, &temperature);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", temperature);
+}
+
+static ssize_t
+temp_crit_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_hwmon_attr *hwmon_attr
+			= container_of(attr, struct thermal_hwmon_attr, attr);
+	struct thermal_hwmon_temp *temp
+			= container_of(hwmon_attr, struct thermal_hwmon_temp,
+				       temp_crit);
+	struct thermal_zone_device *tz = temp->tz;
+	int temperature;
+	int ret;
+
+	ret = tz->ops->get_crit_temp(tz, &temperature);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", temperature);
+}
+
+
+static struct thermal_hwmon_device *
+thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz)
+{
+	struct thermal_hwmon_device *hwmon;
+	char type[THERMAL_NAME_LENGTH];
+
+	mutex_lock(&thermal_hwmon_list_lock);
+	list_for_each_entry(hwmon, &thermal_hwmon_list, node) {
+		strcpy(type, tz->type);
+		strreplace(type, '-', '_');
+		if (!strcmp(hwmon->type, type)) {
+			mutex_unlock(&thermal_hwmon_list_lock);
+			return hwmon;
+		}
+	}
+	mutex_unlock(&thermal_hwmon_list_lock);
+
+	return NULL;
+}
+
+/* Find the temperature input matching a given thermal zone */
+static struct thermal_hwmon_temp *
+thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon,
+			  const struct thermal_zone_device *tz)
+{
+	struct thermal_hwmon_temp *temp;
+
+	mutex_lock(&thermal_hwmon_list_lock);
+	list_for_each_entry(temp, &hwmon->tz_list, hwmon_node)
+		if (temp->tz == tz) {
+			mutex_unlock(&thermal_hwmon_list_lock);
+			return temp;
+		}
+	mutex_unlock(&thermal_hwmon_list_lock);
+
+	return NULL;
+}
+
+static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz)
+{
+	int temp;
+	return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp);
+}
+
+int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	struct thermal_hwmon_device *hwmon;
+	struct thermal_hwmon_temp *temp;
+	int new_hwmon_device = 1;
+	int result;
+
+	hwmon = thermal_hwmon_lookup_by_type(tz);
+	if (hwmon) {
+		new_hwmon_device = 0;
+		goto register_sys_interface;
+	}
+
+	hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&hwmon->tz_list);
+	strscpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
+	strreplace(hwmon->type, '-', '_');
+	hwmon->device = hwmon_device_register_for_thermal(&tz->device,
+							  hwmon->type, hwmon);
+	if (IS_ERR(hwmon->device)) {
+		result = PTR_ERR(hwmon->device);
+		goto free_mem;
+	}
+
+ register_sys_interface:
+	temp = kzalloc(sizeof(*temp), GFP_KERNEL);
+	if (!temp) {
+		result = -ENOMEM;
+		goto unregister_name;
+	}
+
+	temp->tz = tz;
+	hwmon->count++;
+
+	snprintf(temp->temp_input.name, sizeof(temp->temp_input.name),
+		 "temp%d_input", hwmon->count);
+	temp->temp_input.attr.attr.name = temp->temp_input.name;
+	temp->temp_input.attr.attr.mode = 0444;
+	temp->temp_input.attr.show = temp_input_show;
+	sysfs_attr_init(&temp->temp_input.attr.attr);
+	result = device_create_file(hwmon->device, &temp->temp_input.attr);
+	if (result)
+		goto free_temp_mem;
+
+	if (thermal_zone_crit_temp_valid(tz)) {
+		snprintf(temp->temp_crit.name,
+				sizeof(temp->temp_crit.name),
+				"temp%d_crit", hwmon->count);
+		temp->temp_crit.attr.attr.name = temp->temp_crit.name;
+		temp->temp_crit.attr.attr.mode = 0444;
+		temp->temp_crit.attr.show = temp_crit_show;
+		sysfs_attr_init(&temp->temp_crit.attr.attr);
+		result = device_create_file(hwmon->device,
+					    &temp->temp_crit.attr);
+		if (result)
+			goto unregister_input;
+	}
+
+	mutex_lock(&thermal_hwmon_list_lock);
+	if (new_hwmon_device)
+		list_add_tail(&hwmon->node, &thermal_hwmon_list);
+	list_add_tail(&temp->hwmon_node, &hwmon->tz_list);
+	mutex_unlock(&thermal_hwmon_list_lock);
+
+	return 0;
+
+ unregister_input:
+	device_remove_file(hwmon->device, &temp->temp_input.attr);
+ free_temp_mem:
+	kfree(temp);
+ unregister_name:
+	if (new_hwmon_device)
+		hwmon_device_unregister(hwmon->device);
+ free_mem:
+	kfree(hwmon);
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(thermal_add_hwmon_sysfs);
+
+void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	struct thermal_hwmon_device *hwmon;
+	struct thermal_hwmon_temp *temp;
+
+	hwmon = thermal_hwmon_lookup_by_type(tz);
+	if (unlikely(!hwmon)) {
+		/* Should never happen... */
+		dev_dbg(&tz->device, "hwmon device lookup failed!\n");
+		return;
+	}
+
+	temp = thermal_hwmon_lookup_temp(hwmon, tz);
+	if (unlikely(!temp)) {
+		/* Should never happen... */
+		dev_dbg(&tz->device, "temperature input lookup failed!\n");
+		return;
+	}
+
+	device_remove_file(hwmon->device, &temp->temp_input.attr);
+	if (thermal_zone_crit_temp_valid(tz))
+		device_remove_file(hwmon->device, &temp->temp_crit.attr);
+
+	mutex_lock(&thermal_hwmon_list_lock);
+	list_del(&temp->hwmon_node);
+	kfree(temp);
+	if (!list_empty(&hwmon->tz_list)) {
+		mutex_unlock(&thermal_hwmon_list_lock);
+		return;
+	}
+	list_del(&hwmon->node);
+	mutex_unlock(&thermal_hwmon_list_lock);
+
+	hwmon_device_unregister(hwmon->device);
+	kfree(hwmon);
+}
+EXPORT_SYMBOL_GPL(thermal_remove_hwmon_sysfs);
+
+static void devm_thermal_hwmon_release(struct device *dev, void *res)
+{
+	thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
+}
+
+int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	struct thermal_zone_device **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_thermal_hwmon_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = thermal_add_hwmon_sysfs(tz);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = tz;
+	devres_add(&tz->device, ptr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_add_hwmon_sysfs);
+
+MODULE_IMPORT_NS(HWMON_THERMAL);
diff --git a/drivers/thermal/thermal_hwmon.h b/drivers/thermal/thermal_hwmon.h
new file mode 100644
index 000000000..1a9d65f6a
--- /dev/null
+++ b/drivers/thermal/thermal_hwmon.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  thermal_hwmon.h - Generic Thermal Management hwmon support.
+ *
+ *  Code based on Intel thermal_core.c. Copyrights of the original code:
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ *
+ *  Copyright (C) 2013 Texas Instruments
+ *  Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#ifndef __THERMAL_HWMON_H__
+#define __THERMAL_HWMON_H__
+
+#include <linux/thermal.h>
+
+#ifdef CONFIG_THERMAL_HWMON
+int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
+int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
+void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
+#else
+static inline int
+thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+
+static inline int
+devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+
+static inline void
+thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+}
+#endif
+
+#endif /* __THERMAL_HWMON_H__ */
diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c
new file mode 100644
index 000000000..39c921415
--- /dev/null
+++ b/drivers/thermal/thermal_mmio.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+struct thermal_mmio {
+	void __iomem *mmio_base;
+	u32 (*read_mmio)(void __iomem *mmio_base);
+	u32 mask;
+	int factor;
+};
+
+static u32 thermal_mmio_readb(void __iomem *mmio_base)
+{
+	return readb(mmio_base);
+}
+
+static int thermal_mmio_get_temperature(struct thermal_zone_device *tz, int *temp)
+{
+	int t;
+	struct thermal_mmio *sensor = tz->devdata;
+
+	t = sensor->read_mmio(sensor->mmio_base) & sensor->mask;
+	t *= sensor->factor;
+
+	*temp = t;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops thermal_mmio_ops = {
+	.get_temp = thermal_mmio_get_temperature,
+};
+
+static int thermal_mmio_probe(struct platform_device *pdev)
+{
+	struct resource *resource;
+	struct thermal_mmio *sensor;
+	int (*sensor_init_func)(struct platform_device *pdev,
+				struct thermal_mmio *sensor);
+	struct thermal_zone_device *thermal_zone;
+	int ret;
+	int temperature;
+
+	sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return -ENOMEM;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sensor->mmio_base = devm_ioremap_resource(&pdev->dev, resource);
+	if (IS_ERR(sensor->mmio_base))
+		return PTR_ERR(sensor->mmio_base);
+
+	sensor_init_func = device_get_match_data(&pdev->dev);
+	if (sensor_init_func) {
+		ret = sensor_init_func(pdev, sensor);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to initialize sensor (%d)\n",
+				ret);
+			return ret;
+		}
+	}
+
+	thermal_zone = devm_thermal_of_zone_register(&pdev->dev,
+						     0,
+						     sensor,
+						     &thermal_mmio_ops);
+	if (IS_ERR(thermal_zone)) {
+		dev_err(&pdev->dev,
+			"failed to register sensor (%ld)\n",
+			PTR_ERR(thermal_zone));
+		return PTR_ERR(thermal_zone);
+	}
+
+	thermal_mmio_get_temperature(thermal_zone, &temperature);
+	dev_info(&pdev->dev,
+		 "thermal mmio sensor %s registered, current temperature: %d\n",
+		 pdev->name, temperature);
+
+	return 0;
+}
+
+static int al_thermal_init(struct platform_device *pdev,
+			   struct thermal_mmio *sensor)
+{
+	sensor->read_mmio = thermal_mmio_readb;
+	sensor->mask = 0xff;
+	sensor->factor = 1000;
+
+	return 0;
+}
+
+static const struct of_device_id thermal_mmio_id_table[] = {
+	{ .compatible = "amazon,al-thermal", .data = al_thermal_init},
+	{}
+};
+MODULE_DEVICE_TABLE(of, thermal_mmio_id_table);
+
+static struct platform_driver thermal_mmio_driver = {
+	.probe = thermal_mmio_probe,
+	.driver = {
+		.name = "thermal-mmio",
+		.of_match_table = thermal_mmio_id_table,
+	},
+};
+
+module_platform_driver(thermal_mmio_driver);
+
+MODULE_AUTHOR("Talel Shenhar <talel@amazon.com>");
+MODULE_DESCRIPTION("Thermal MMIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
new file mode 100644
index 000000000..e2d78a996
--- /dev/null
+++ b/drivers/thermal/thermal_netlink.c
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Linaro Limited
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * Generic netlink for thermal management framework
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <net/genetlink.h>
+#include <uapi/linux/thermal.h>
+
+#include "thermal_core.h"
+
+static const struct genl_multicast_group thermal_genl_mcgrps[] = {
+	{ .name = THERMAL_GENL_SAMPLING_GROUP_NAME, },
+	{ .name = THERMAL_GENL_EVENT_GROUP_NAME,  },
+};
+
+static const struct nla_policy thermal_genl_policy[THERMAL_GENL_ATTR_MAX + 1] = {
+	/* Thermal zone */
+	[THERMAL_GENL_ATTR_TZ]			= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TEMP]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_TRIP_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_TEMP]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_TYPE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_HYST]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_MODE]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_CDEV_WEIGHT]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_NAME]		= { .type = NLA_STRING,
+						    .len = THERMAL_NAME_LENGTH },
+	/* Governor(s) */
+	[THERMAL_GENL_ATTR_TZ_GOV]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_GOV_NAME]		= { .type = NLA_STRING,
+						    .len = THERMAL_NAME_LENGTH },
+	/* Cooling devices */
+	[THERMAL_GENL_ATTR_CDEV]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_CDEV_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_CUR_STATE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_MAX_STATE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_NAME]		= { .type = NLA_STRING,
+						    .len = THERMAL_NAME_LENGTH },
+	/* CPU capabilities */
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY]	= { .type = NLA_U32 },
+};
+
+struct param {
+	struct nlattr **attrs;
+	struct sk_buff *msg;
+	const char *name;
+	int tz_id;
+	int cdev_id;
+	int trip_id;
+	int trip_temp;
+	int trip_type;
+	int trip_hyst;
+	int temp;
+	int cdev_state;
+	int cdev_max_state;
+	struct thermal_genl_cpu_caps *cpu_capabilities;
+	int cpu_capabilities_count;
+};
+
+typedef int (*cb_t)(struct param *);
+
+static struct genl_family thermal_gnl_family;
+
+/************************** Sampling encoding *******************************/
+
+int thermal_genl_sampling_temp(int id, int temp)
+{
+	struct sk_buff *skb;
+	void *hdr;
+
+	skb = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0,
+			  THERMAL_GENL_SAMPLING_TEMP);
+	if (!hdr)
+		goto out_free;
+
+	if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_ID, id))
+		goto out_cancel;
+
+	if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_TEMP, temp))
+		goto out_cancel;
+
+	genlmsg_end(skb, hdr);
+
+	genlmsg_multicast(&thermal_gnl_family, skb, 0, 0, GFP_KERNEL);
+
+	return 0;
+out_cancel:
+	genlmsg_cancel(skb, hdr);
+out_free:
+	nlmsg_free(skb);
+
+	return -EMSGSIZE;
+}
+
+/**************************** Event encoding *********************************/
+
+static int thermal_genl_event_tz_create(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_string(p->msg, THERMAL_GENL_ATTR_TZ_NAME, p->name))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz_trip_up(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz_trip_add(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, p->trip_type) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, p->trip_temp) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, p->trip_hyst))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz_trip_delete(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cdev_add(struct param *p)
+{
+	if (nla_put_string(p->msg, THERMAL_GENL_ATTR_CDEV_NAME,
+			   p->name) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID,
+			p->cdev_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_MAX_STATE,
+			p->cdev_max_state))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cdev_delete(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID, p->cdev_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cdev_state_update(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID,
+			p->cdev_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_CUR_STATE,
+			p->cdev_state))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_gov_change(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_string(p->msg, THERMAL_GENL_ATTR_GOV_NAME, p->name))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cpu_capability_change(struct param *p)
+{
+	struct thermal_genl_cpu_caps *cpu_cap = p->cpu_capabilities;
+	struct sk_buff *msg = p->msg;
+	struct nlattr *start_cap;
+	int i;
+
+	start_cap = nla_nest_start(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY);
+	if (!start_cap)
+		return -EMSGSIZE;
+
+	for (i = 0; i < p->cpu_capabilities_count; ++i) {
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_ID,
+				cpu_cap->cpu))
+			goto out_cancel_nest;
+
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE,
+				cpu_cap->performance))
+			goto out_cancel_nest;
+
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY,
+				cpu_cap->efficiency))
+			goto out_cancel_nest;
+
+		++cpu_cap;
+	}
+
+	nla_nest_end(msg, start_cap);
+
+	return 0;
+out_cancel_nest:
+	nla_nest_cancel(msg, start_cap);
+
+	return -EMSGSIZE;
+}
+
+int thermal_genl_event_tz_delete(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz")));
+
+int thermal_genl_event_tz_enable(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz")));
+
+int thermal_genl_event_tz_disable(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz")));
+
+int thermal_genl_event_tz_trip_down(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz_trip_up")));
+
+int thermal_genl_event_tz_trip_change(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz_trip_add")));
+
+static cb_t event_cb[] = {
+	[THERMAL_GENL_EVENT_TZ_CREATE]		= thermal_genl_event_tz_create,
+	[THERMAL_GENL_EVENT_TZ_DELETE]		= thermal_genl_event_tz_delete,
+	[THERMAL_GENL_EVENT_TZ_ENABLE]		= thermal_genl_event_tz_enable,
+	[THERMAL_GENL_EVENT_TZ_DISABLE]		= thermal_genl_event_tz_disable,
+	[THERMAL_GENL_EVENT_TZ_TRIP_UP]		= thermal_genl_event_tz_trip_up,
+	[THERMAL_GENL_EVENT_TZ_TRIP_DOWN]	= thermal_genl_event_tz_trip_down,
+	[THERMAL_GENL_EVENT_TZ_TRIP_CHANGE]	= thermal_genl_event_tz_trip_change,
+	[THERMAL_GENL_EVENT_TZ_TRIP_ADD]	= thermal_genl_event_tz_trip_add,
+	[THERMAL_GENL_EVENT_TZ_TRIP_DELETE]	= thermal_genl_event_tz_trip_delete,
+	[THERMAL_GENL_EVENT_CDEV_ADD]		= thermal_genl_event_cdev_add,
+	[THERMAL_GENL_EVENT_CDEV_DELETE]	= thermal_genl_event_cdev_delete,
+	[THERMAL_GENL_EVENT_CDEV_STATE_UPDATE]	= thermal_genl_event_cdev_state_update,
+	[THERMAL_GENL_EVENT_TZ_GOV_CHANGE]	= thermal_genl_event_gov_change,
+	[THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE] = thermal_genl_event_cpu_capability_change,
+};
+
+/*
+ * Generic netlink event encoding
+ */
+static int thermal_genl_send_event(enum thermal_genl_event event,
+				   struct param *p)
+{
+	struct sk_buff *msg;
+	int ret = -EMSGSIZE;
+	void *hdr;
+
+	msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	p->msg = msg;
+
+	hdr = genlmsg_put(msg, 0, 0, &thermal_gnl_family, 0, event);
+	if (!hdr)
+		goto out_free_msg;
+
+	ret = event_cb[event](p);
+	if (ret)
+		goto out_cancel_msg;
+
+	genlmsg_end(msg, hdr);
+
+	genlmsg_multicast(&thermal_gnl_family, msg, 0, 1, GFP_KERNEL);
+
+	return 0;
+
+out_cancel_msg:
+	genlmsg_cancel(msg, hdr);
+out_free_msg:
+	nlmsg_free(msg);
+
+	return ret;
+}
+
+int thermal_notify_tz_create(int tz_id, const char *name)
+{
+	struct param p = { .tz_id = tz_id, .name = name };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_CREATE, &p);
+}
+
+int thermal_notify_tz_delete(int tz_id)
+{
+	struct param p = { .tz_id = tz_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DELETE, &p);
+}
+
+int thermal_notify_tz_enable(int tz_id)
+{
+	struct param p = { .tz_id = tz_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_ENABLE, &p);
+}
+
+int thermal_notify_tz_disable(int tz_id)
+{
+	struct param p = { .tz_id = tz_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
+}
+
+int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
+}
+
+int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
+}
+
+int thermal_notify_tz_trip_add(int tz_id, int trip_id, int trip_type,
+			       int trip_temp, int trip_hyst)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id,
+			   .trip_type = trip_type, .trip_temp = trip_temp,
+			   .trip_hyst = trip_hyst };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_ADD, &p);
+}
+
+int thermal_notify_tz_trip_delete(int tz_id, int trip_id)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DELETE, &p);
+}
+
+int thermal_notify_tz_trip_change(int tz_id, int trip_id, int trip_type,
+				  int trip_temp, int trip_hyst)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id,
+			   .trip_type = trip_type, .trip_temp = trip_temp,
+			   .trip_hyst = trip_hyst };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_CHANGE, &p);
+}
+
+int thermal_notify_cdev_state_update(int cdev_id, int cdev_state)
+{
+	struct param p = { .cdev_id = cdev_id, .cdev_state = cdev_state };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_STATE_UPDATE, &p);
+}
+
+int thermal_notify_cdev_add(int cdev_id, const char *name, int cdev_max_state)
+{
+	struct param p = { .cdev_id = cdev_id, .name = name,
+			   .cdev_max_state = cdev_max_state };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_ADD, &p);
+}
+
+int thermal_notify_cdev_delete(int cdev_id)
+{
+	struct param p = { .cdev_id = cdev_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_DELETE, &p);
+}
+
+int thermal_notify_tz_gov_change(int tz_id, const char *name)
+{
+	struct param p = { .tz_id = tz_id, .name = name };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_GOV_CHANGE, &p);
+}
+
+int thermal_genl_cpu_capability_event(int count,
+				      struct thermal_genl_cpu_caps *caps)
+{
+	struct param p = { .cpu_capabilities_count = count, .cpu_capabilities = caps };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE, &p);
+}
+EXPORT_SYMBOL_GPL(thermal_genl_cpu_capability_event);
+
+/*************************** Command encoding ********************************/
+
+static int __thermal_genl_cmd_tz_get_id(struct thermal_zone_device *tz,
+					void *data)
+{
+	struct sk_buff *msg = data;
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, tz->id) ||
+	    nla_put_string(msg, THERMAL_GENL_ATTR_TZ_NAME, tz->type))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_cmd_tz_get_id(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct nlattr *start_tz;
+	int ret;
+
+	start_tz = nla_nest_start(msg, THERMAL_GENL_ATTR_TZ);
+	if (!start_tz)
+		return -EMSGSIZE;
+
+	ret = for_each_thermal_zone(__thermal_genl_cmd_tz_get_id, msg);
+	if (ret)
+		goto out_cancel_nest;
+
+	nla_nest_end(msg, start_tz);
+
+	return 0;
+
+out_cancel_nest:
+	nla_nest_cancel(msg, start_tz);
+
+	return ret;
+}
+
+static int thermal_genl_cmd_tz_get_trip(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct thermal_zone_device *tz;
+	struct nlattr *start_trip;
+	int i, id;
+
+	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		return -EINVAL;
+
+	id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	tz = thermal_zone_get_by_id(id);
+	if (!tz)
+		return -EINVAL;
+
+	start_trip = nla_nest_start(msg, THERMAL_GENL_ATTR_TZ_TRIP);
+	if (!start_trip)
+		return -EMSGSIZE;
+
+	mutex_lock(&tz->lock);
+
+	for (i = 0; i < tz->num_trips; i++) {
+
+		enum thermal_trip_type type;
+		int temp, hyst = 0;
+
+		tz->ops->get_trip_type(tz, i, &type);
+		tz->ops->get_trip_temp(tz, i, &temp);
+		if (tz->ops->get_trip_hyst)
+			tz->ops->get_trip_hyst(tz, i, &hyst);
+
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, i) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, type) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, temp) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, hyst))
+			goto out_cancel_nest;
+	}
+
+	mutex_unlock(&tz->lock);
+
+	nla_nest_end(msg, start_trip);
+
+	return 0;
+
+out_cancel_nest:
+	mutex_unlock(&tz->lock);
+
+	return -EMSGSIZE;
+}
+
+static int thermal_genl_cmd_tz_get_temp(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct thermal_zone_device *tz;
+	int temp, ret, id;
+
+	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		return -EINVAL;
+
+	id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	tz = thermal_zone_get_by_id(id);
+	if (!tz)
+		return -EINVAL;
+
+	ret = thermal_zone_get_temp(tz, &temp);
+	if (ret)
+		return ret;
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id) ||
+	    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TEMP, temp))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_cmd_tz_get_gov(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct thermal_zone_device *tz;
+	int id, ret = 0;
+
+	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		return -EINVAL;
+
+	id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	tz = thermal_zone_get_by_id(id);
+	if (!tz)
+		return -EINVAL;
+
+	mutex_lock(&tz->lock);
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id) ||
+	    nla_put_string(msg, THERMAL_GENL_ATTR_TZ_GOV_NAME,
+			   tz->governor->name))
+		ret = -EMSGSIZE;
+
+	mutex_unlock(&tz->lock);
+
+	return ret;
+}
+
+static int __thermal_genl_cmd_cdev_get(struct thermal_cooling_device *cdev,
+				       void *data)
+{
+	struct sk_buff *msg = data;
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_CDEV_ID, cdev->id))
+		return -EMSGSIZE;
+
+	if (nla_put_string(msg, THERMAL_GENL_ATTR_CDEV_NAME, cdev->type))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_cmd_cdev_get(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct nlattr *start_cdev;
+	int ret;
+
+	start_cdev = nla_nest_start(msg, THERMAL_GENL_ATTR_CDEV);
+	if (!start_cdev)
+		return -EMSGSIZE;
+
+	ret = for_each_thermal_cooling_device(__thermal_genl_cmd_cdev_get, msg);
+	if (ret)
+		goto out_cancel_nest;
+
+	nla_nest_end(msg, start_cdev);
+
+	return 0;
+out_cancel_nest:
+	nla_nest_cancel(msg, start_cdev);
+
+	return ret;
+}
+
+static cb_t cmd_cb[] = {
+	[THERMAL_GENL_CMD_TZ_GET_ID]	= thermal_genl_cmd_tz_get_id,
+	[THERMAL_GENL_CMD_TZ_GET_TRIP]	= thermal_genl_cmd_tz_get_trip,
+	[THERMAL_GENL_CMD_TZ_GET_TEMP]	= thermal_genl_cmd_tz_get_temp,
+	[THERMAL_GENL_CMD_TZ_GET_GOV]	= thermal_genl_cmd_tz_get_gov,
+	[THERMAL_GENL_CMD_CDEV_GET]	= thermal_genl_cmd_cdev_get,
+};
+
+static int thermal_genl_cmd_dumpit(struct sk_buff *skb,
+				   struct netlink_callback *cb)
+{
+	struct param p = { .msg = skb };
+	const struct genl_dumpit_info *info = genl_dumpit_info(cb);
+	int cmd = info->op.cmd;
+	int ret;
+	void *hdr;
+
+	hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0, cmd);
+	if (!hdr)
+		return -EMSGSIZE;
+
+	ret = cmd_cb[cmd](&p);
+	if (ret)
+		goto out_cancel_msg;
+
+	genlmsg_end(skb, hdr);
+
+	return 0;
+
+out_cancel_msg:
+	genlmsg_cancel(skb, hdr);
+
+	return ret;
+}
+
+static int thermal_genl_cmd_doit(struct sk_buff *skb,
+				 struct genl_info *info)
+{
+	struct param p = { .attrs = info->attrs };
+	struct sk_buff *msg;
+	void *hdr;
+	int cmd = info->genlhdr->cmd;
+	int ret = -EMSGSIZE;
+
+	msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	p.msg = msg;
+
+	hdr = genlmsg_put_reply(msg, info, &thermal_gnl_family, 0, cmd);
+	if (!hdr)
+		goto out_free_msg;
+
+	ret = cmd_cb[cmd](&p);
+	if (ret)
+		goto out_cancel_msg;
+
+	genlmsg_end(msg, hdr);
+
+	return genlmsg_reply(msg, info);
+
+out_cancel_msg:
+	genlmsg_cancel(msg, hdr);
+out_free_msg:
+	nlmsg_free(msg);
+
+	return ret;
+}
+
+static const struct genl_small_ops thermal_genl_ops[] = {
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_ID,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.dumpit = thermal_genl_cmd_dumpit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_TRIP,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = thermal_genl_cmd_doit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_TEMP,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = thermal_genl_cmd_doit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_GOV,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = thermal_genl_cmd_doit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_CDEV_GET,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.dumpit = thermal_genl_cmd_dumpit,
+	},
+};
+
+static struct genl_family thermal_gnl_family __ro_after_init = {
+	.hdrsize	= 0,
+	.name		= THERMAL_GENL_FAMILY_NAME,
+	.version	= THERMAL_GENL_VERSION,
+	.maxattr	= THERMAL_GENL_ATTR_MAX,
+	.policy		= thermal_genl_policy,
+	.small_ops	= thermal_genl_ops,
+	.n_small_ops	= ARRAY_SIZE(thermal_genl_ops),
+	.resv_start_op	= THERMAL_GENL_CMD_CDEV_GET + 1,
+	.mcgrps		= thermal_genl_mcgrps,
+	.n_mcgrps	= ARRAY_SIZE(thermal_genl_mcgrps),
+};
+
+int __init thermal_netlink_init(void)
+{
+	return genl_register_family(&thermal_gnl_family);
+}
diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
new file mode 100644
index 000000000..1052f5231
--- /dev/null
+++ b/drivers/thermal/thermal_netlink.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) Linaro Ltd 2020
+ *  Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+
+struct thermal_genl_cpu_caps {
+	int cpu;
+	int performance;
+	int efficiency;
+};
+
+/* Netlink notification function */
+#ifdef CONFIG_THERMAL_NETLINK
+int __init thermal_netlink_init(void);
+int thermal_notify_tz_create(int tz_id, const char *name);
+int thermal_notify_tz_delete(int tz_id);
+int thermal_notify_tz_enable(int tz_id);
+int thermal_notify_tz_disable(int tz_id);
+int thermal_notify_tz_trip_down(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_up(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_delete(int tz_id, int id);
+int thermal_notify_tz_trip_add(int tz_id, int id, int type,
+			       int temp, int hyst);
+int thermal_notify_tz_trip_change(int tz_id, int id, int type,
+				  int temp, int hyst);
+int thermal_notify_cdev_state_update(int cdev_id, int state);
+int thermal_notify_cdev_add(int cdev_id, const char *name, int max_state);
+int thermal_notify_cdev_delete(int cdev_id);
+int thermal_notify_tz_gov_change(int tz_id, const char *name);
+int thermal_genl_sampling_temp(int id, int temp);
+int thermal_genl_cpu_capability_event(int count,
+				      struct thermal_genl_cpu_caps *caps);
+#else
+static inline int thermal_netlink_init(void)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_create(int tz_id, const char *name)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_delete(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_enable(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_disable(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_delete(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_add(int tz_id, int id, int type,
+					     int temp, int hyst)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_change(int tz_id, int id, int type,
+						int temp, int hyst)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_state_update(int cdev_id, int state)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_add(int cdev_id, const char *name,
+					  int max_state)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_delete(int cdev_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_gov_change(int tz_id, const char *name)
+{
+	return 0;
+}
+
+static inline int thermal_genl_sampling_temp(int id, int temp)
+{
+	return 0;
+}
+
+static inline int thermal_genl_cpu_capability_event(int count, struct thermal_genl_cpu_caps *caps)
+{
+	return 0;
+}
+
+#endif /* CONFIG_THERMAL_NETLINK */
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
new file mode 100644
index 000000000..4104743db
--- /dev/null
+++ b/drivers/thermal/thermal_of.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  of-thermal.c - Generic Thermal Management device tree support.
+ *
+ *  Copyright (C) 2013 Texas Instruments
+ *  Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include "thermal_core.h"
+
+/**
+ * of_thermal_get_ntrips - function to export number of available trip
+ *			   points.
+ * @tz: pointer to a thermal zone
+ *
+ * This function is a globally visible wrapper to get number of trip points
+ * stored in the local struct __thermal_zone
+ *
+ * Return: number of available trip points, -ENODEV when data not available
+ */
+int of_thermal_get_ntrips(struct thermal_zone_device *tz)
+{
+	return tz->num_trips;
+}
+EXPORT_SYMBOL_GPL(of_thermal_get_ntrips);
+
+/**
+ * of_thermal_is_trip_valid - function to check if trip point is valid
+ *
+ * @tz:	pointer to a thermal zone
+ * @trip:	trip point to evaluate
+ *
+ * This function is responsible for checking if passed trip point is valid
+ *
+ * Return: true if trip point is valid, false otherwise
+ */
+bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip)
+{
+	if (trip >= tz->num_trips || trip < 0)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid);
+
+/**
+ * of_thermal_get_trip_points - function to get access to a globally exported
+ *				trip points
+ *
+ * @tz:	pointer to a thermal zone
+ *
+ * This function provides a pointer to trip points table
+ *
+ * Return: pointer to trip points table, NULL otherwise
+ */
+const struct thermal_trip *
+of_thermal_get_trip_points(struct thermal_zone_device *tz)
+{
+	return tz->trips;
+}
+EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
+
+static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+				    enum thermal_trip_type *type)
+{
+	if (trip >= tz->num_trips || trip < 0)
+		return -EDOM;
+
+	*type = tz->trips[trip].type;
+
+	return 0;
+}
+
+static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
+				    int *temp)
+{
+	if (trip >= tz->num_trips || trip < 0)
+		return -EDOM;
+
+	*temp = tz->trips[trip].temperature;
+
+	return 0;
+}
+
+static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
+				    int *hyst)
+{
+	if (trip >= tz->num_trips || trip < 0)
+		return -EDOM;
+
+	*hyst = tz->trips[trip].hysteresis;
+
+	return 0;
+}
+
+static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
+				    int hyst)
+{
+	if (trip >= tz->num_trips || trip < 0)
+		return -EDOM;
+
+	/* thermal framework should take care of data->mask & (1 << trip) */
+	tz->trips[trip].hysteresis = hyst;
+
+	return 0;
+}
+
+static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
+				    int *temp)
+{
+	int i;
+
+	for (i = 0; i < tz->num_trips; i++)
+		if (tz->trips[i].type == THERMAL_TRIP_CRITICAL) {
+			*temp = tz->trips[i].temperature;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+/***   functions parsing device tree nodes   ***/
+
+static int of_find_trip_id(struct device_node *np, struct device_node *trip)
+{
+	struct device_node *trips;
+	struct device_node *t;
+	int i = 0;
+
+	trips = of_get_child_by_name(np, "trips");
+	if (!trips) {
+		pr_err("Failed to find 'trips' node\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Find the trip id point associated with the cooling device map
+	 */
+	for_each_child_of_node(trips, t) {
+
+		if (t == trip) {
+			of_node_put(t);
+			goto out;
+		}
+		i++;
+	}
+
+	i = -ENXIO;
+out:
+	of_node_put(trips);
+
+	return i;
+}
+
+/*
+ * It maps 'enum thermal_trip_type' found in include/linux/thermal.h
+ * into the device tree binding of 'trip', property type.
+ */
+static const char * const trip_types[] = {
+	[THERMAL_TRIP_ACTIVE]	= "active",
+	[THERMAL_TRIP_PASSIVE]	= "passive",
+	[THERMAL_TRIP_HOT]	= "hot",
+	[THERMAL_TRIP_CRITICAL]	= "critical",
+};
+
+/**
+ * thermal_of_get_trip_type - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ * @type: Pointer to resulting trip type
+ *
+ * The function gets trip type string from property 'type',
+ * and store its index in trip_types table in @type,
+ *
+ * Return: 0 on success, or errno in error case.
+ */
+static int thermal_of_get_trip_type(struct device_node *np,
+				    enum thermal_trip_type *type)
+{
+	const char *t;
+	int err, i;
+
+	err = of_property_read_string(np, "type", &t);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(trip_types); i++)
+		if (!strcasecmp(t, trip_types[i])) {
+			*type = i;
+			return 0;
+		}
+
+	return -ENODEV;
+}
+
+static int thermal_of_populate_trip(struct device_node *np,
+				    struct thermal_trip *trip)
+{
+	int prop;
+	int ret;
+
+	ret = of_property_read_u32(np, "temperature", &prop);
+	if (ret < 0) {
+		pr_err("missing temperature property\n");
+		return ret;
+	}
+	trip->temperature = prop;
+
+	ret = of_property_read_u32(np, "hysteresis", &prop);
+	if (ret < 0) {
+		pr_err("missing hysteresis property\n");
+		return ret;
+	}
+	trip->hysteresis = prop;
+
+	ret = thermal_of_get_trip_type(np, &trip->type);
+	if (ret < 0) {
+		pr_err("wrong trip type property\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct thermal_trip *thermal_of_trips_init(struct device_node *np, int *ntrips)
+{
+	struct thermal_trip *tt;
+	struct device_node *trips, *trip;
+	int ret, count;
+
+	trips = of_get_child_by_name(np, "trips");
+	if (!trips) {
+		pr_err("Failed to find 'trips' node\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	count = of_get_child_count(trips);
+	if (!count) {
+		pr_err("No trip point defined\n");
+		ret = -EINVAL;
+		goto out_of_node_put;
+	}
+
+	tt = kzalloc(sizeof(*tt) * count, GFP_KERNEL);
+	if (!tt) {
+		ret = -ENOMEM;
+		goto out_of_node_put;
+	}
+
+	*ntrips = count;
+
+	count = 0;
+	for_each_child_of_node(trips, trip) {
+		ret = thermal_of_populate_trip(trip, &tt[count++]);
+		if (ret)
+			goto out_kfree;
+	}
+
+	of_node_put(trips);
+
+	return tt;
+
+out_kfree:
+	kfree(tt);
+	*ntrips = 0;
+out_of_node_put:
+	of_node_put(trips);
+
+	return ERR_PTR(ret);
+}
+
+static struct device_node *of_thermal_zone_find(struct device_node *sensor, int id)
+{
+	struct device_node *np, *tz;
+	struct of_phandle_args sensor_specs;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np) {
+		pr_debug("No thermal zones description\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	/*
+	 * Search for each thermal zone, a defined sensor
+	 * corresponding to the one passed as parameter
+	 */
+	for_each_available_child_of_node(np, tz) {
+
+		int count, i;
+
+		count = of_count_phandle_with_args(tz, "thermal-sensors",
+						   "#thermal-sensor-cells");
+		if (count <= 0) {
+			pr_err("%pOFn: missing thermal sensor\n", tz);
+			tz = ERR_PTR(-EINVAL);
+			goto out;
+		}
+
+		for (i = 0; i < count; i++) {
+
+			int ret;
+
+			ret = of_parse_phandle_with_args(tz, "thermal-sensors",
+							 "#thermal-sensor-cells",
+							 i, &sensor_specs);
+			if (ret < 0) {
+				pr_err("%pOFn: Failed to read thermal-sensors cells: %d\n", tz, ret);
+				tz = ERR_PTR(ret);
+				goto out;
+			}
+
+			if ((sensor == sensor_specs.np) && id == (sensor_specs.args_count ?
+								  sensor_specs.args[0] : 0)) {
+				pr_debug("sensor %pOFn id=%d belongs to %pOFn\n", sensor, id, tz);
+				goto out;
+			}
+		}
+	}
+	tz = ERR_PTR(-ENODEV);
+out:
+	of_node_put(np);
+	return tz;
+}
+
+static int thermal_of_monitor_init(struct device_node *np, int *delay, int *pdelay)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "polling-delay-passive", pdelay);
+	if (ret < 0) {
+		pr_err("%pOFn: missing polling-delay-passive property\n", np);
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "polling-delay", delay);
+	if (ret < 0) {
+		pr_err("%pOFn: missing polling-delay property\n", np);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct thermal_zone_params *thermal_of_parameters_init(struct device_node *np)
+{
+	struct thermal_zone_params *tzp;
+	int coef[2];
+	int ncoef = ARRAY_SIZE(coef);
+	int prop, ret;
+
+	tzp = kzalloc(sizeof(*tzp), GFP_KERNEL);
+	if (!tzp)
+		return ERR_PTR(-ENOMEM);
+
+	tzp->no_hwmon = true;
+
+	if (!of_property_read_u32(np, "sustainable-power", &prop))
+		tzp->sustainable_power = prop;
+
+	/*
+	 * For now, the thermal framework supports only one sensor per
+	 * thermal zone. Thus, we are considering only the first two
+	 * values as slope and offset.
+	 */
+	ret = of_property_read_u32_array(np, "coefficients", coef, ncoef);
+	if (ret) {
+		coef[0] = 1;
+		coef[1] = 0;
+	}
+
+	tzp->slope = coef[0];
+	tzp->offset = coef[1];
+
+	return tzp;
+}
+
+static struct device_node *thermal_of_zone_get_by_name(struct thermal_zone_device *tz)
+{
+	struct device_node *np, *tz_np;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np)
+		return ERR_PTR(-ENODEV);
+
+	tz_np = of_get_child_by_name(np, tz->type);
+
+	of_node_put(np);
+
+	if (!tz_np)
+		return ERR_PTR(-ENODEV);
+
+	return tz_np;
+}
+
+static int __thermal_of_unbind(struct device_node *map_np, int index, int trip_id,
+			       struct thermal_zone_device *tz, struct thermal_cooling_device *cdev)
+{
+	struct of_phandle_args cooling_spec;
+	int ret;
+
+	ret = of_parse_phandle_with_args(map_np, "cooling-device", "#cooling-cells",
+					 index, &cooling_spec);
+
+	if (ret < 0) {
+		pr_err("Invalid cooling-device entry\n");
+		return ret;
+	}
+
+	of_node_put(cooling_spec.np);
+
+	if (cooling_spec.args_count < 2) {
+		pr_err("wrong reference to cooling device, missing limits\n");
+		return -EINVAL;
+	}
+
+	if (cooling_spec.np != cdev->np)
+		return 0;
+
+	ret = thermal_zone_unbind_cooling_device(tz, trip_id, cdev);
+	if (ret)
+		pr_err("Failed to unbind '%s' with '%s': %d\n", tz->type, cdev->type, ret);
+
+	return ret;
+}
+
+static int __thermal_of_bind(struct device_node *map_np, int index, int trip_id,
+			     struct thermal_zone_device *tz, struct thermal_cooling_device *cdev)
+{
+	struct of_phandle_args cooling_spec;
+	int ret, weight = THERMAL_WEIGHT_DEFAULT;
+
+	of_property_read_u32(map_np, "contribution", &weight);
+
+	ret = of_parse_phandle_with_args(map_np, "cooling-device", "#cooling-cells",
+					 index, &cooling_spec);
+
+	if (ret < 0) {
+		pr_err("Invalid cooling-device entry\n");
+		return ret;
+	}
+
+	of_node_put(cooling_spec.np);
+
+	if (cooling_spec.args_count < 2) {
+		pr_err("wrong reference to cooling device, missing limits\n");
+		return -EINVAL;
+	}
+
+	if (cooling_spec.np != cdev->np)
+		return 0;
+
+	ret = thermal_zone_bind_cooling_device(tz, trip_id, cdev, cooling_spec.args[1],
+					       cooling_spec.args[0],
+					       weight);
+	if (ret)
+		pr_err("Failed to bind '%s' with '%s': %d\n", tz->type, cdev->type, ret);
+
+	return ret;
+}
+
+static int thermal_of_for_each_cooling_device(struct device_node *tz_np, struct device_node *map_np,
+					      struct thermal_zone_device *tz, struct thermal_cooling_device *cdev,
+					      int (*action)(struct device_node *, int, int,
+							    struct thermal_zone_device *, struct thermal_cooling_device *))
+{
+	struct device_node *tr_np;
+	int count, i, trip_id;
+
+	tr_np = of_parse_phandle(map_np, "trip", 0);
+	if (!tr_np)
+		return -ENODEV;
+
+	trip_id = of_find_trip_id(tz_np, tr_np);
+	if (trip_id < 0)
+		return trip_id;
+
+	count = of_count_phandle_with_args(map_np, "cooling-device", "#cooling-cells");
+	if (count <= 0) {
+		pr_err("Add a cooling_device property with at least one device\n");
+		return -ENOENT;
+	}
+
+	/*
+	 * At this point, we don't want to bail out when there is an
+	 * error, we will try to bind/unbind as many as possible
+	 * cooling devices
+	 */
+	for (i = 0; i < count; i++)
+		action(map_np, i, trip_id, tz, cdev);
+
+	return 0;
+}
+
+static int thermal_of_for_each_cooling_maps(struct thermal_zone_device *tz,
+					    struct thermal_cooling_device *cdev,
+					    int (*action)(struct device_node *, int, int,
+							  struct thermal_zone_device *, struct thermal_cooling_device *))
+{
+	struct device_node *tz_np, *cm_np, *child;
+	int ret = 0;
+
+	tz_np = thermal_of_zone_get_by_name(tz);
+	if (IS_ERR(tz_np)) {
+		pr_err("Failed to get node tz by name\n");
+		return PTR_ERR(tz_np);
+	}
+
+	cm_np = of_get_child_by_name(tz_np, "cooling-maps");
+	if (!cm_np)
+		goto out;
+
+	for_each_child_of_node(cm_np, child) {
+		ret = thermal_of_for_each_cooling_device(tz_np, child, tz, cdev, action);
+		if (ret) {
+			of_node_put(child);
+			break;
+		}
+	}
+
+	of_node_put(cm_np);
+out:
+	of_node_put(tz_np);
+
+	return ret;
+}
+
+static int thermal_of_bind(struct thermal_zone_device *tz,
+			   struct thermal_cooling_device *cdev)
+{
+	return thermal_of_for_each_cooling_maps(tz, cdev, __thermal_of_bind);
+}
+
+static int thermal_of_unbind(struct thermal_zone_device *tz,
+			     struct thermal_cooling_device *cdev)
+{
+	return thermal_of_for_each_cooling_maps(tz, cdev, __thermal_of_unbind);
+}
+
+/**
+ * thermal_of_zone_unregister - Cleanup the specific allocated ressources
+ *
+ * This function disables the thermal zone and frees the different
+ * ressources allocated specific to the thermal OF.
+ *
+ * @tz: a pointer to the thermal zone structure
+ */
+void thermal_of_zone_unregister(struct thermal_zone_device *tz)
+{
+	struct thermal_trip *trips = tz->trips;
+	struct thermal_zone_params *tzp = tz->tzp;
+	struct thermal_zone_device_ops *ops = tz->ops;
+
+	thermal_zone_device_disable(tz);
+	thermal_zone_device_unregister(tz);
+	kfree(trips);
+	kfree(tzp);
+	kfree(ops);
+}
+EXPORT_SYMBOL_GPL(thermal_of_zone_unregister);
+
+/**
+ * thermal_of_zone_register - Register a thermal zone with device node
+ * sensor
+ *
+ * The thermal_of_zone_register() parses a device tree given a device
+ * node sensor and identifier. It searches for the thermal zone
+ * associated to the couple sensor/id and retrieves all the thermal
+ * zone properties and registers new thermal zone with those
+ * properties.
+ *
+ * @sensor: A device node pointer corresponding to the sensor in the device tree
+ * @id: An integer as sensor identifier
+ * @data: A private data to be stored in the thermal zone dedicated private area
+ * @ops: A set of thermal sensor ops
+ *
+ * Return: a valid thermal zone structure pointer on success.
+ * 	- EINVAL: if the device tree thermal description is malformed
+ *	- ENOMEM: if one structure can not be allocated
+ *	- Other negative errors are returned by the underlying called functions
+ */
+struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
+						     const struct thermal_zone_device_ops *ops)
+{
+	struct thermal_zone_device *tz;
+	struct thermal_trip *trips;
+	struct thermal_zone_params *tzp;
+	struct thermal_zone_device_ops *of_ops;
+	struct device_node *np;
+	int delay, pdelay;
+	int ntrips, mask;
+	int ret;
+
+	of_ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
+	if (!of_ops)
+		return ERR_PTR(-ENOMEM);
+
+	np = of_thermal_zone_find(sensor, id);
+	if (IS_ERR(np)) {
+		if (PTR_ERR(np) != -ENODEV)
+			pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
+		ret = PTR_ERR(np);
+		goto out_kfree_of_ops;
+	}
+
+	trips = thermal_of_trips_init(np, &ntrips);
+	if (IS_ERR(trips)) {
+		pr_err("Failed to find trip points for %pOFn id=%d\n", sensor, id);
+		ret = PTR_ERR(trips);
+		goto out_kfree_of_ops;
+	}
+
+	ret = thermal_of_monitor_init(np, &delay, &pdelay);
+	if (ret) {
+		pr_err("Failed to initialize monitoring delays from %pOFn\n", np);
+		goto out_kfree_trips;
+	}
+
+	tzp = thermal_of_parameters_init(np);
+	if (IS_ERR(tzp)) {
+		ret = PTR_ERR(tzp);
+		pr_err("Failed to initialize parameter from %pOFn: %d\n", np, ret);
+		goto out_kfree_trips;
+	}
+
+	of_ops->get_trip_type = of_ops->get_trip_type ? : of_thermal_get_trip_type;
+	of_ops->get_trip_temp = of_ops->get_trip_temp ? : of_thermal_get_trip_temp;
+	of_ops->get_trip_hyst = of_ops->get_trip_hyst ? : of_thermal_get_trip_hyst;
+	of_ops->set_trip_hyst = of_ops->set_trip_hyst ? : of_thermal_set_trip_hyst;
+	of_ops->get_crit_temp = of_ops->get_crit_temp ? : of_thermal_get_crit_temp;
+	of_ops->bind = thermal_of_bind;
+	of_ops->unbind = thermal_of_unbind;
+
+	mask = GENMASK_ULL((ntrips) - 1, 0);
+
+	tz = thermal_zone_device_register_with_trips(np->name, trips, ntrips,
+						     mask, data, of_ops, tzp,
+						     pdelay, delay);
+	if (IS_ERR(tz)) {
+		ret = PTR_ERR(tz);
+		pr_err("Failed to register thermal zone %pOFn: %d\n", np, ret);
+		goto out_kfree_tzp;
+	}
+
+	ret = thermal_zone_device_enable(tz);
+	if (ret) {
+		pr_err("Failed to enabled thermal zone '%s', id=%d: %d\n",
+		       tz->type, tz->id, ret);
+		thermal_of_zone_unregister(tz);
+		return ERR_PTR(ret);
+	}
+
+	return tz;
+
+out_kfree_tzp:
+	kfree(tzp);
+out_kfree_trips:
+	kfree(trips);
+out_kfree_of_ops:
+	kfree(of_ops);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(thermal_of_zone_register);
+
+static void devm_thermal_of_zone_release(struct device *dev, void *res)
+{
+	thermal_of_zone_unregister(*(struct thermal_zone_device **)res);
+}
+
+static int devm_thermal_of_zone_match(struct device *dev, void *res,
+				      void *data)
+{
+	struct thermal_zone_device **r = res;
+
+	if (WARN_ON(!r || !*r))
+		return 0;
+
+	return *r == data;
+}
+
+/**
+ * devm_thermal_of_zone_register - register a thermal tied with the sensor life cycle
+ *
+ * This function is the device version of the thermal_of_zone_register() function.
+ *
+ * @dev: a device structure pointer to sensor to be tied with the thermal zone OF life cycle
+ * @sensor_id: the sensor identifier
+ * @data: a pointer to a private data to be stored in the thermal zone 'devdata' field
+ * @ops: a pointer to the ops structure associated with the sensor
+ */
+struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int sensor_id, void *data,
+							  const struct thermal_zone_device_ops *ops)
+{
+	struct thermal_zone_device **ptr, *tzd;
+
+	ptr = devres_alloc(devm_thermal_of_zone_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	tzd = thermal_of_zone_register(dev->of_node, sensor_id, data, ops);
+	if (IS_ERR(tzd)) {
+		devres_free(ptr);
+		return tzd;
+	}
+
+	*ptr = tzd;
+	devres_add(dev, ptr);
+
+	return tzd;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_of_zone_register);
+
+/**
+ * devm_thermal_of_zone_unregister - Resource managed version of
+ *				thermal_of_zone_unregister().
+ * @dev: Device for which which resource was allocated.
+ * @tz: a pointer to struct thermal_zone where the sensor is registered.
+ *
+ * This function removes the sensor callbacks and private data from the
+ * thermal zone device registered with devm_thermal_zone_of_sensor_register()
+ * API. It will also silent the zone by remove the .get_temp() and .get_trend()
+ * thermal zone device callbacks.
+ * Normally this function will not need to be called and the resource
+ * management code will ensure that the resource is freed.
+ */
+void devm_thermal_of_zone_unregister(struct device *dev, struct thermal_zone_device *tz)
+{
+	WARN_ON(devres_release(dev, devm_thermal_of_zone_release,
+			       devm_thermal_of_zone_match, tz));
+}
+EXPORT_SYMBOL_GPL(devm_thermal_of_zone_unregister);
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
new file mode 100644
index 000000000..bd7596125
--- /dev/null
+++ b/drivers/thermal/thermal_sysfs.c
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  thermal.c - sysfs interface of thermal devices
+ *
+ *  Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com>
+ *
+ *  Highly based on original thermal_core.c
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include "thermal_core.h"
+
+/* sys I/F for thermal zone */
+
+static ssize_t
+type_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	return sprintf(buf, "%s\n", tz->type);
+}
+
+static ssize_t
+temp_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int temperature, ret;
+
+	ret = thermal_zone_get_temp(tz, &temperature);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", temperature);
+}
+
+static ssize_t
+mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int enabled;
+
+	mutex_lock(&tz->lock);
+	enabled = thermal_zone_device_is_enabled(tz);
+	mutex_unlock(&tz->lock);
+
+	return sprintf(buf, "%s\n", enabled ? "enabled" : "disabled");
+}
+
+static ssize_t
+mode_store(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int result;
+
+	if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
+		result = thermal_zone_device_enable(tz);
+	else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
+		result = thermal_zone_device_disable(tz);
+	else
+		result = -EINVAL;
+
+	if (result)
+		return result;
+
+	return count;
+}
+
+static ssize_t
+trip_point_type_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	enum thermal_trip_type type;
+	int trip, result;
+
+	if (!tz->ops->get_trip_type)
+		return -EPERM;
+
+	if (sscanf(attr->attr.name, "trip_point_%d_type", &trip) != 1)
+		return -EINVAL;
+
+	result = tz->ops->get_trip_type(tz, trip, &type);
+	if (result)
+		return result;
+
+	switch (type) {
+	case THERMAL_TRIP_CRITICAL:
+		return sprintf(buf, "critical\n");
+	case THERMAL_TRIP_HOT:
+		return sprintf(buf, "hot\n");
+	case THERMAL_TRIP_PASSIVE:
+		return sprintf(buf, "passive\n");
+	case THERMAL_TRIP_ACTIVE:
+		return sprintf(buf, "active\n");
+	default:
+		return sprintf(buf, "unknown\n");
+	}
+}
+
+static ssize_t
+trip_point_temp_store(struct device *dev, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int trip, ret;
+	int temperature, hyst = 0;
+	enum thermal_trip_type type;
+
+	if (!tz->ops->set_trip_temp && !tz->trips)
+		return -EPERM;
+
+	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
+		return -EINVAL;
+
+	if (kstrtoint(buf, 10, &temperature))
+		return -EINVAL;
+
+	if (tz->ops->set_trip_temp) {
+		ret = tz->ops->set_trip_temp(tz, trip, temperature);
+		if (ret)
+			return ret;
+	}
+
+	if (tz->trips)
+		tz->trips[trip].temperature = temperature;
+
+	if (tz->ops->get_trip_hyst) {
+		ret = tz->ops->get_trip_hyst(tz, trip, &hyst);
+		if (ret)
+			return ret;
+	}
+
+	ret = tz->ops->get_trip_type(tz, trip, &type);
+	if (ret)
+		return ret;
+
+	thermal_notify_tz_trip_change(tz->id, trip, type, temperature, hyst);
+
+	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+	return count;
+}
+
+static ssize_t
+trip_point_temp_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int trip, ret;
+	int temperature;
+
+	if (!tz->ops->get_trip_temp)
+		return -EPERM;
+
+	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
+		return -EINVAL;
+
+	ret = tz->ops->get_trip_temp(tz, trip, &temperature);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", temperature);
+}
+
+static ssize_t
+trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int trip, ret;
+	int temperature;
+
+	if (!tz->ops->set_trip_hyst)
+		return -EPERM;
+
+	if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
+		return -EINVAL;
+
+	if (kstrtoint(buf, 10, &temperature))
+		return -EINVAL;
+
+	/*
+	 * We are not doing any check on the 'temperature' value
+	 * here. The driver implementing 'set_trip_hyst' has to
+	 * take care of this.
+	 */
+	ret = tz->ops->set_trip_hyst(tz, trip, temperature);
+
+	if (!ret)
+		thermal_zone_set_trips(tz);
+
+	return ret ? ret : count;
+}
+
+static ssize_t
+trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int trip, ret;
+	int temperature;
+
+	if (!tz->ops->get_trip_hyst)
+		return -EPERM;
+
+	if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
+		return -EINVAL;
+
+	ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
+
+	return ret ? ret : sprintf(buf, "%d\n", temperature);
+}
+
+static ssize_t
+policy_store(struct device *dev, struct device_attribute *attr,
+	     const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	char name[THERMAL_NAME_LENGTH];
+	int ret;
+
+	snprintf(name, sizeof(name), "%s", buf);
+
+	ret = thermal_zone_device_set_policy(tz, name);
+	if (!ret)
+		ret = count;
+
+	return ret;
+}
+
+static ssize_t
+policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	return sprintf(buf, "%s\n", tz->governor->name);
+}
+
+static ssize_t
+available_policies_show(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	return thermal_build_list_of_policies(buf);
+}
+
+#if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
+static ssize_t
+emul_temp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int ret = 0;
+	int temperature;
+
+	if (kstrtoint(buf, 10, &temperature))
+		return -EINVAL;
+
+	if (!tz->ops->set_emul_temp) {
+		mutex_lock(&tz->lock);
+		tz->emul_temperature = temperature;
+		mutex_unlock(&tz->lock);
+	} else {
+		ret = tz->ops->set_emul_temp(tz, temperature);
+	}
+
+	if (!ret)
+		thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+	return ret ? ret : count;
+}
+static DEVICE_ATTR_WO(emul_temp);
+#endif
+
+static ssize_t
+sustainable_power_show(struct device *dev, struct device_attribute *devattr,
+		       char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	if (tz->tzp)
+		return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
+	else
+		return -EIO;
+}
+
+static ssize_t
+sustainable_power_store(struct device *dev, struct device_attribute *devattr,
+			const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	u32 sustainable_power;
+
+	if (!tz->tzp)
+		return -EIO;
+
+	if (kstrtou32(buf, 10, &sustainable_power))
+		return -EINVAL;
+
+	tz->tzp->sustainable_power = sustainable_power;
+
+	return count;
+}
+
+#define create_s32_tzp_attr(name)					\
+	static ssize_t							\
+	name##_show(struct device *dev, struct device_attribute *devattr, \
+		char *buf)						\
+	{								\
+	struct thermal_zone_device *tz = to_thermal_zone(dev);		\
+									\
+	if (tz->tzp)							\
+		return sprintf(buf, "%d\n", tz->tzp->name);		\
+	else								\
+		return -EIO;						\
+	}								\
+									\
+	static ssize_t							\
+	name##_store(struct device *dev, struct device_attribute *devattr, \
+		const char *buf, size_t count)				\
+	{								\
+		struct thermal_zone_device *tz = to_thermal_zone(dev);	\
+		s32 value;						\
+									\
+		if (!tz->tzp)						\
+			return -EIO;					\
+									\
+		if (kstrtos32(buf, 10, &value))				\
+			return -EINVAL;					\
+									\
+		tz->tzp->name = value;					\
+									\
+		return count;						\
+	}								\
+	static DEVICE_ATTR_RW(name)
+
+create_s32_tzp_attr(k_po);
+create_s32_tzp_attr(k_pu);
+create_s32_tzp_attr(k_i);
+create_s32_tzp_attr(k_d);
+create_s32_tzp_attr(integral_cutoff);
+create_s32_tzp_attr(slope);
+create_s32_tzp_attr(offset);
+#undef create_s32_tzp_attr
+
+/*
+ * These are thermal zone device attributes that will always be present.
+ * All the attributes created for tzp (create_s32_tzp_attr) also are always
+ * present on the sysfs interface.
+ */
+static DEVICE_ATTR_RO(type);
+static DEVICE_ATTR_RO(temp);
+static DEVICE_ATTR_RW(policy);
+static DEVICE_ATTR_RO(available_policies);
+static DEVICE_ATTR_RW(sustainable_power);
+
+/* These thermal zone device attributes are created based on conditions */
+static DEVICE_ATTR_RW(mode);
+
+/* These attributes are unconditionally added to a thermal zone */
+static struct attribute *thermal_zone_dev_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_temp.attr,
+#if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
+	&dev_attr_emul_temp.attr,
+#endif
+	&dev_attr_policy.attr,
+	&dev_attr_available_policies.attr,
+	&dev_attr_sustainable_power.attr,
+	&dev_attr_k_po.attr,
+	&dev_attr_k_pu.attr,
+	&dev_attr_k_i.attr,
+	&dev_attr_k_d.attr,
+	&dev_attr_integral_cutoff.attr,
+	&dev_attr_slope.attr,
+	&dev_attr_offset.attr,
+	NULL,
+};
+
+static const struct attribute_group thermal_zone_attribute_group = {
+	.attrs = thermal_zone_dev_attrs,
+};
+
+static struct attribute *thermal_zone_mode_attrs[] = {
+	&dev_attr_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group thermal_zone_mode_attribute_group = {
+	.attrs = thermal_zone_mode_attrs,
+};
+
+static const struct attribute_group *thermal_zone_attribute_groups[] = {
+	&thermal_zone_attribute_group,
+	&thermal_zone_mode_attribute_group,
+	/* This is not NULL terminated as we create the group dynamically */
+};
+
+/**
+ * create_trip_attrs() - create attributes for trip points
+ * @tz:		the thermal zone device
+ * @mask:	Writeable trip point bitmap.
+ *
+ * helper function to instantiate sysfs entries for every trip
+ * point and its properties of a struct thermal_zone_device.
+ *
+ * Return: 0 on success, the proper error value otherwise.
+ */
+static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
+{
+	struct attribute **attrs;
+	int indx;
+
+	/* This function works only for zones with at least one trip */
+	if (tz->num_trips <= 0)
+		return -EINVAL;
+
+	tz->trip_type_attrs = kcalloc(tz->num_trips, sizeof(*tz->trip_type_attrs),
+				      GFP_KERNEL);
+	if (!tz->trip_type_attrs)
+		return -ENOMEM;
+
+	tz->trip_temp_attrs = kcalloc(tz->num_trips, sizeof(*tz->trip_temp_attrs),
+				      GFP_KERNEL);
+	if (!tz->trip_temp_attrs) {
+		kfree(tz->trip_type_attrs);
+		return -ENOMEM;
+	}
+
+	if (tz->ops->get_trip_hyst) {
+		tz->trip_hyst_attrs = kcalloc(tz->num_trips,
+					      sizeof(*tz->trip_hyst_attrs),
+					      GFP_KERNEL);
+		if (!tz->trip_hyst_attrs) {
+			kfree(tz->trip_type_attrs);
+			kfree(tz->trip_temp_attrs);
+			return -ENOMEM;
+		}
+	}
+
+	attrs = kcalloc(tz->num_trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
+	if (!attrs) {
+		kfree(tz->trip_type_attrs);
+		kfree(tz->trip_temp_attrs);
+		if (tz->ops->get_trip_hyst)
+			kfree(tz->trip_hyst_attrs);
+		return -ENOMEM;
+	}
+
+	for (indx = 0; indx < tz->num_trips; indx++) {
+		/* create trip type attribute */
+		snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
+			 "trip_point_%d_type", indx);
+
+		sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
+		tz->trip_type_attrs[indx].attr.attr.name =
+						tz->trip_type_attrs[indx].name;
+		tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
+		tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+		attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
+
+		/* create trip temp attribute */
+		snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+			 "trip_point_%d_temp", indx);
+
+		sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
+		tz->trip_temp_attrs[indx].attr.attr.name =
+						tz->trip_temp_attrs[indx].name;
+		tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
+		tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
+		if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) &&
+		    mask & (1 << indx)) {
+			tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
+			tz->trip_temp_attrs[indx].attr.store =
+							trip_point_temp_store;
+		}
+		attrs[indx + tz->num_trips] = &tz->trip_temp_attrs[indx].attr.attr;
+
+		/* create Optional trip hyst attribute */
+		if (!tz->ops->get_trip_hyst)
+			continue;
+		snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
+			 "trip_point_%d_hyst", indx);
+
+		sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
+		tz->trip_hyst_attrs[indx].attr.attr.name =
+					tz->trip_hyst_attrs[indx].name;
+		tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
+		tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
+		if (tz->ops->set_trip_hyst) {
+			tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
+			tz->trip_hyst_attrs[indx].attr.store =
+					trip_point_hyst_store;
+		}
+		attrs[indx + tz->num_trips * 2] =
+					&tz->trip_hyst_attrs[indx].attr.attr;
+	}
+	attrs[tz->num_trips * 3] = NULL;
+
+	tz->trips_attribute_group.attrs = attrs;
+
+	return 0;
+}
+
+/**
+ * destroy_trip_attrs() - destroy attributes for trip points
+ * @tz:		the thermal zone device
+ *
+ * helper function to free resources allocated by create_trip_attrs()
+ */
+static void destroy_trip_attrs(struct thermal_zone_device *tz)
+{
+	if (!tz)
+		return;
+
+	kfree(tz->trip_type_attrs);
+	kfree(tz->trip_temp_attrs);
+	if (tz->ops->get_trip_hyst)
+		kfree(tz->trip_hyst_attrs);
+	kfree(tz->trips_attribute_group.attrs);
+}
+
+int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
+				      int mask)
+{
+	const struct attribute_group **groups;
+	int i, size, result;
+
+	/* we need one extra for trips and the NULL to terminate the array */
+	size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2;
+	/* This also takes care of API requirement to be NULL terminated */
+	groups = kcalloc(size, sizeof(*groups), GFP_KERNEL);
+	if (!groups)
+		return -ENOMEM;
+
+	for (i = 0; i < size - 2; i++)
+		groups[i] = thermal_zone_attribute_groups[i];
+
+	if (tz->num_trips) {
+		result = create_trip_attrs(tz, mask);
+		if (result) {
+			kfree(groups);
+
+			return result;
+		}
+
+		groups[size - 2] = &tz->trips_attribute_group;
+	}
+
+	tz->device.groups = groups;
+
+	return 0;
+}
+
+void thermal_zone_destroy_device_groups(struct thermal_zone_device *tz)
+{
+	if (!tz)
+		return;
+
+	if (tz->num_trips)
+		destroy_trip_attrs(tz);
+
+	kfree(tz->device.groups);
+}
+
+/* sys I/F for cooling device */
+static ssize_t
+cdev_type_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+
+	return sprintf(buf, "%s\n", cdev->type);
+}
+
+static ssize_t max_state_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+
+	return sprintf(buf, "%ld\n", cdev->max_state);
+}
+
+static ssize_t cur_state_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	unsigned long state;
+	int ret;
+
+	ret = cdev->ops->get_cur_state(cdev, &state);
+	if (ret)
+		return ret;
+	return sprintf(buf, "%ld\n", state);
+}
+
+static ssize_t
+cur_state_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	unsigned long state;
+	int result;
+
+	if (sscanf(buf, "%ld\n", &state) != 1)
+		return -EINVAL;
+
+	if ((long)state < 0)
+		return -EINVAL;
+
+	/* Requested state should be less than max_state + 1 */
+	if (state > cdev->max_state)
+		return -EINVAL;
+
+	mutex_lock(&cdev->lock);
+
+	result = cdev->ops->set_cur_state(cdev, state);
+	if (!result)
+		thermal_cooling_device_stats_update(cdev, state);
+
+	mutex_unlock(&cdev->lock);
+	return result ? result : count;
+}
+
+static struct device_attribute
+dev_attr_cdev_type = __ATTR(type, 0444, cdev_type_show, NULL);
+static DEVICE_ATTR_RO(max_state);
+static DEVICE_ATTR_RW(cur_state);
+
+static struct attribute *cooling_device_attrs[] = {
+	&dev_attr_cdev_type.attr,
+	&dev_attr_max_state.attr,
+	&dev_attr_cur_state.attr,
+	NULL,
+};
+
+static const struct attribute_group cooling_device_attr_group = {
+	.attrs = cooling_device_attrs,
+};
+
+static const struct attribute_group *cooling_device_attr_groups[] = {
+	&cooling_device_attr_group,
+	NULL, /* Space allocated for cooling_device_stats_attr_group */
+	NULL,
+};
+
+#ifdef CONFIG_THERMAL_STATISTICS
+struct cooling_dev_stats {
+	spinlock_t lock;
+	unsigned int total_trans;
+	unsigned long state;
+	unsigned long max_states;
+	ktime_t last_time;
+	ktime_t *time_in_state;
+	unsigned int *trans_table;
+};
+
+static void update_time_in_state(struct cooling_dev_stats *stats)
+{
+	ktime_t now = ktime_get(), delta;
+
+	delta = ktime_sub(now, stats->last_time);
+	stats->time_in_state[stats->state] =
+		ktime_add(stats->time_in_state[stats->state], delta);
+	stats->last_time = now;
+}
+
+void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
+					 unsigned long new_state)
+{
+	struct cooling_dev_stats *stats = cdev->stats;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->lock);
+
+	if (stats->state == new_state)
+		goto unlock;
+
+	update_time_in_state(stats);
+	stats->trans_table[stats->state * stats->max_states + new_state]++;
+	stats->state = new_state;
+	stats->total_trans++;
+
+unlock:
+	spin_unlock(&stats->lock);
+}
+
+static ssize_t total_trans_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	int ret;
+
+	spin_lock(&stats->lock);
+	ret = sprintf(buf, "%u\n", stats->total_trans);
+	spin_unlock(&stats->lock);
+
+	return ret;
+}
+
+static ssize_t
+time_in_state_ms_show(struct device *dev, struct device_attribute *attr,
+		      char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	ssize_t len = 0;
+	int i;
+
+	spin_lock(&stats->lock);
+	update_time_in_state(stats);
+
+	for (i = 0; i < stats->max_states; i++) {
+		len += sprintf(buf + len, "state%u\t%llu\n", i,
+			       ktime_to_ms(stats->time_in_state[i]));
+	}
+	spin_unlock(&stats->lock);
+
+	return len;
+}
+
+static ssize_t
+reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
+	    size_t count)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	int i, states = stats->max_states;
+
+	spin_lock(&stats->lock);
+
+	stats->total_trans = 0;
+	stats->last_time = ktime_get();
+	memset(stats->trans_table, 0,
+	       states * states * sizeof(*stats->trans_table));
+
+	for (i = 0; i < stats->max_states; i++)
+		stats->time_in_state[i] = ktime_set(0, 0);
+
+	spin_unlock(&stats->lock);
+
+	return count;
+}
+
+static ssize_t trans_table_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	ssize_t len = 0;
+	int i, j;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, " From  :    To\n");
+	len += snprintf(buf + len, PAGE_SIZE - len, "       : ");
+	for (i = 0; i < stats->max_states; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len, "state%2u  ", i);
+	}
+	if (len >= PAGE_SIZE)
+		return PAGE_SIZE;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+
+	for (i = 0; i < stats->max_states; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+
+		len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
+
+		for (j = 0; j < stats->max_states; j++) {
+			if (len >= PAGE_SIZE)
+				break;
+			len += snprintf(buf + len, PAGE_SIZE - len, "%8u ",
+				stats->trans_table[i * stats->max_states + j]);
+		}
+		if (len >= PAGE_SIZE)
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+	}
+
+	if (len >= PAGE_SIZE) {
+		pr_warn_once("Thermal transition table exceeds PAGE_SIZE. Disabling\n");
+		return -EFBIG;
+	}
+	return len;
+}
+
+static DEVICE_ATTR_RO(total_trans);
+static DEVICE_ATTR_RO(time_in_state_ms);
+static DEVICE_ATTR_WO(reset);
+static DEVICE_ATTR_RO(trans_table);
+
+static struct attribute *cooling_device_stats_attrs[] = {
+	&dev_attr_total_trans.attr,
+	&dev_attr_time_in_state_ms.attr,
+	&dev_attr_reset.attr,
+	&dev_attr_trans_table.attr,
+	NULL
+};
+
+static const struct attribute_group cooling_device_stats_attr_group = {
+	.attrs = cooling_device_stats_attrs,
+	.name = "stats"
+};
+
+static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
+{
+	const struct attribute_group *stats_attr_group = NULL;
+	struct cooling_dev_stats *stats;
+	unsigned long states;
+	int var;
+
+	if (cdev->ops->get_max_state(cdev, &states))
+		goto out;
+
+	states++; /* Total number of states is highest state + 1 */
+
+	var = sizeof(*stats);
+	var += sizeof(*stats->time_in_state) * states;
+	var += sizeof(*stats->trans_table) * states * states;
+
+	stats = kzalloc(var, GFP_KERNEL);
+	if (!stats)
+		goto out;
+
+	stats->time_in_state = (ktime_t *)(stats + 1);
+	stats->trans_table = (unsigned int *)(stats->time_in_state + states);
+	cdev->stats = stats;
+	stats->last_time = ktime_get();
+	stats->max_states = states;
+
+	spin_lock_init(&stats->lock);
+
+	stats_attr_group = &cooling_device_stats_attr_group;
+
+out:
+	/* Fill the empty slot left in cooling_device_attr_groups */
+	var = ARRAY_SIZE(cooling_device_attr_groups) - 2;
+	cooling_device_attr_groups[var] = stats_attr_group;
+}
+
+static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
+{
+	kfree(cdev->stats);
+	cdev->stats = NULL;
+}
+
+#else
+
+static inline void
+cooling_device_stats_setup(struct thermal_cooling_device *cdev) {}
+static inline void
+cooling_device_stats_destroy(struct thermal_cooling_device *cdev) {}
+
+#endif /* CONFIG_THERMAL_STATISTICS */
+
+void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev)
+{
+	cooling_device_stats_setup(cdev);
+	cdev->device.groups = cooling_device_attr_groups;
+}
+
+void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev)
+{
+	cooling_device_stats_destroy(cdev);
+}
+
+/* these helper will be used only at the time of bindig */
+ssize_t
+trip_point_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_instance *instance;
+
+	instance =
+	    container_of(attr, struct thermal_instance, attr);
+
+	return sprintf(buf, "%d\n", instance->trip);
+}
+
+ssize_t
+weight_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_instance *instance;
+
+	instance = container_of(attr, struct thermal_instance, weight_attr);
+
+	return sprintf(buf, "%d\n", instance->weight);
+}
+
+ssize_t weight_store(struct device *dev, struct device_attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct thermal_instance *instance;
+	int ret, weight;
+
+	ret = kstrtoint(buf, 0, &weight);
+	if (ret)
+		return ret;
+
+	instance = container_of(attr, struct thermal_instance, weight_attr);
+	instance->weight = weight;
+
+	return count;
+}
diff --git a/drivers/thermal/ti-soc-thermal/Kconfig b/drivers/thermal/ti-soc-thermal/Kconfig
new file mode 100644
index 000000000..683a7027a
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/Kconfig
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config TI_SOC_THERMAL
+	tristate "Texas Instruments SoCs temperature sensor driver"
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  OMAP4460+ on die bandgap temperature sensor support. The register
+	  set is part of system control module.
+
+	  This includes alert interrupts generation and also the TSHUT
+	  support.
+
+config TI_THERMAL
+	bool "Texas Instruments SoCs thermal framework support"
+	depends on TI_SOC_THERMAL
+	help
+	  If you say yes here you want to get support for generic thermal
+	  framework for the Texas Instruments on die bandgap temperature sensor.
+
+	  This includes trip points definitions, extrapolation rules and
+	  CPU cooling device bindings.
+
+config OMAP3_THERMAL
+	bool "Texas Instruments OMAP3 thermal support"
+	depends on TI_SOC_THERMAL
+	depends on ARCH_OMAP3 || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  OMAP3 SoC family. The current chips supported are:
+	   - OMAP3430
+
+	  OMAP3 chips normally don't need thermal management, and sensors in
+	  this generation are not accurate, nor they are very close to
+	  the important hotspots.
+
+	  Say 'N' here.
+
+config OMAP4_THERMAL
+	bool "Texas Instruments OMAP4 thermal support"
+	depends on TI_SOC_THERMAL
+	depends on ARCH_OMAP4 || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  OMAP4 SoC family. The current chip supported are:
+	   - OMAP4430
+	   - OMAP4460
+	   - OMAP4470
+
+	  This includes alert interrupts generation and also the TSHUT
+	  support.
+
+config OMAP5_THERMAL
+	bool "Texas Instruments OMAP5 thermal support"
+	depends on TI_SOC_THERMAL
+	depends on SOC_OMAP5 || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  OMAP5 SoC family. The current chip supported are:
+	   - OMAP5430
+
+	  This includes alert interrupts generation and also the TSHUT
+	  support.
+
+config DRA752_THERMAL
+	bool "Texas Instruments DRA752 thermal support"
+	depends on TI_SOC_THERMAL
+	depends on SOC_DRA7XX || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  DRA752 SoC family. The current chip supported are:
+	   - DRA752
+
+	  This includes alert interrupts generation and also the TSHUT
+	  support.
diff --git a/drivers/thermal/ti-soc-thermal/Makefile b/drivers/thermal/ti-soc-thermal/Makefile
new file mode 100644
index 000000000..f180ebead
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_TI_SOC_THERMAL)		+= ti-soc-thermal.o
+ti-soc-thermal-y			:= ti-bandgap.o
+ti-soc-thermal-$(CONFIG_TI_THERMAL)	+= ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_DRA752_THERMAL)	+= dra752-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP3_THERMAL)	+= omap3-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP4_THERMAL)	+= omap4-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP5_THERMAL)	+= omap5-thermal-data.o
diff --git a/drivers/thermal/ti-soc-thermal/TODO b/drivers/thermal/ti-soc-thermal/TODO
new file mode 100644
index 000000000..7da787d19
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/TODO
@@ -0,0 +1,12 @@
+List of TODOs (by Eduardo Valentin)
+
+on ti-bandgap.c:
+- Revisit PM support
+
+on ti-thermal-common.c/ti-thermal.h:
+- Revisit need for locking
+
+generally:
+- make sure this code works on OMAP4430, OMAP4460 and OMAP5430
+
+Copy patches to Eduardo Valentin <eduardo.valentin@ti.com>
diff --git a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
new file mode 100644
index 000000000..d1b5b699c
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * DRA752 bandgap registers, bitfields and temperature definitions
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ *   Tero Kristo <t-kristo@ti.com>
+ *
+ * This is an auto generated file.
+ */
+#ifndef __DRA752_BANDGAP_H
+#define __DRA752_BANDGAP_H
+
+/**
+ * *** DRA752 ***
+ *
+ * Below, in sequence, are the Register definitions,
+ * the bitfields and the temperature definitions for DRA752.
+ */
+
+/**
+ * DRA752 register definitions
+ *
+ * Registers are defined as offsets. The offsets are
+ * relative to FUSE_OPP_BGAP_GPU on DRA752.
+ * DRA752_BANDGAP_BASE		0x4a0021e0
+ *
+ * Register below are grouped by domain (not necessarily in offset order)
+ */
+
+
+/* DRA752.common register offsets */
+#define DRA752_BANDGAP_CTRL_1_OFFSET		0x1a0
+#define DRA752_BANDGAP_STATUS_1_OFFSET		0x1c8
+#define DRA752_BANDGAP_CTRL_2_OFFSET		0x39c
+#define DRA752_BANDGAP_STATUS_2_OFFSET		0x3b8
+
+/* DRA752.core register offsets */
+#define DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET		0x8
+#define DRA752_TEMP_SENSOR_CORE_OFFSET			0x154
+#define DRA752_BANDGAP_THRESHOLD_CORE_OFFSET		0x1ac
+#define DRA752_DTEMP_CORE_1_OFFSET			0x20c
+#define DRA752_DTEMP_CORE_2_OFFSET			0x210
+
+/* DRA752.iva register offsets */
+#define DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET		0x388
+#define DRA752_TEMP_SENSOR_IVA_OFFSET			0x398
+#define DRA752_BANDGAP_THRESHOLD_IVA_OFFSET		0x3a4
+#define DRA752_DTEMP_IVA_1_OFFSET			0x3d4
+#define DRA752_DTEMP_IVA_2_OFFSET			0x3d8
+
+/* DRA752.mpu register offsets */
+#define DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET		0x4
+#define DRA752_TEMP_SENSOR_MPU_OFFSET			0x14c
+#define DRA752_BANDGAP_THRESHOLD_MPU_OFFSET		0x1a4
+#define DRA752_DTEMP_MPU_1_OFFSET			0x1e4
+#define DRA752_DTEMP_MPU_2_OFFSET			0x1e8
+
+/* DRA752.dspeve register offsets */
+#define DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET			0x384
+#define DRA752_TEMP_SENSOR_DSPEVE_OFFSET			0x394
+#define DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET			0x3a0
+#define DRA752_DTEMP_DSPEVE_1_OFFSET				0x3c0
+#define DRA752_DTEMP_DSPEVE_2_OFFSET				0x3c4
+
+/* DRA752.gpu register offsets */
+#define DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET		0x0
+#define DRA752_TEMP_SENSOR_GPU_OFFSET			0x150
+#define DRA752_BANDGAP_THRESHOLD_GPU_OFFSET		0x1a8
+#define DRA752_DTEMP_GPU_1_OFFSET			0x1f8
+#define DRA752_DTEMP_GPU_2_OFFSET			0x1fc
+
+/**
+ * Register bitfields for DRA752
+ *
+ * All the macros bellow define the required bits for
+ * controlling temperature on DRA752. Bit defines are
+ * grouped by register.
+ */
+
+/* DRA752.BANDGAP_STATUS_1 */
+#define DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK		BIT(5)
+#define DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK		BIT(4)
+#define DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK		BIT(3)
+#define DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK		BIT(2)
+#define DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK		BIT(1)
+#define DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK		BIT(0)
+
+/* DRA752.BANDGAP_CTRL_2 */
+#define DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK			BIT(22)
+#define DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK		BIT(21)
+#define DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK			BIT(3)
+#define DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK		BIT(2)
+#define DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK		BIT(1)
+#define DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK		BIT(0)
+
+/* DRA752.BANDGAP_STATUS_2 */
+#define DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK			BIT(3)
+#define DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK			BIT(2)
+#define DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK			BIT(1)
+#define DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK		BIT(0)
+
+/* DRA752.BANDGAP_CTRL_1 */
+#define DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK		(0x7 << 27)
+#define DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK			BIT(23)
+#define DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK			BIT(22)
+#define DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK			BIT(21)
+#define DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK		BIT(5)
+#define DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK		BIT(4)
+#define DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK			BIT(3)
+#define DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK		BIT(2)
+#define DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK			BIT(1)
+#define DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK		BIT(0)
+
+/* DRA752.TEMP_SENSOR */
+#define DRA752_TEMP_SENSOR_TMPSOFF_MASK		BIT(11)
+#define DRA752_TEMP_SENSOR_EOCZ_MASK		BIT(10)
+#define DRA752_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
+
+/* DRA752.BANDGAP_THRESHOLD */
+#define DRA752_BANDGAP_THRESHOLD_HOT_MASK		(0x3ff << 16)
+#define DRA752_BANDGAP_THRESHOLD_COLD_MASK		(0x3ff << 0)
+
+/**
+ * Temperature limits and thresholds for DRA752
+ *
+ * All the macros bellow are definitions for handling the
+ * ADC conversions and representation of temperature limits
+ * and thresholds for DRA752. Definitions are grouped
+ * by temperature domain.
+ */
+
+/* DRA752.common temperature definitions */
+/* ADC conversion table limits */
+#define DRA752_ADC_START_VALUE		540
+#define DRA752_ADC_END_VALUE		945
+
+/* DRA752.GPU temperature definitions */
+/* bandgap clock limits */
+#define DRA752_GPU_MAX_FREQ				1500000
+#define DRA752_GPU_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define DRA752_GPU_T_HOT				800
+#define DRA752_GPU_T_COLD				795
+
+/* DRA752.MPU temperature definitions */
+/* bandgap clock limits */
+#define DRA752_MPU_MAX_FREQ				1500000
+#define DRA752_MPU_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define DRA752_MPU_T_HOT				800
+#define DRA752_MPU_T_COLD				795
+
+/* DRA752.CORE temperature definitions */
+/* bandgap clock limits */
+#define DRA752_CORE_MAX_FREQ				1500000
+#define DRA752_CORE_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define DRA752_CORE_T_HOT				800
+#define DRA752_CORE_T_COLD				795
+
+/* DRA752.DSPEVE temperature definitions */
+/* bandgap clock limits */
+#define DRA752_DSPEVE_MAX_FREQ				1500000
+#define DRA752_DSPEVE_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define DRA752_DSPEVE_T_HOT				800
+#define DRA752_DSPEVE_T_COLD				795
+
+/* DRA752.IVA temperature definitions */
+/* bandgap clock limits */
+#define DRA752_IVA_MAX_FREQ				1500000
+#define DRA752_IVA_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define DRA752_IVA_T_HOT				800
+#define DRA752_IVA_T_COLD				795
+
+#endif /* __DRA752_BANDGAP_H */
diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c
new file mode 100644
index 000000000..a33107350
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DRA752 thermal data.
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ * Contact:
+ *	Eduardo Valentin <eduardo.valentin@ti.com>
+ *	Tero Kristo <t-kristo@ti.com>
+ *
+ * This file is partially autogenerated.
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+#include "dra752-bandgap.h"
+
+/*
+ * DRA752 has five instances of thermal sensor: MPU, GPU, CORE,
+ * IVA and DSPEVE need to describe the individual registers and
+ * bit fields.
+ */
+
+/*
+ * DRA752 CORE thermal sensor register offsets and bit-fields
+ */
+static struct temp_sensor_registers
+dra752_core_temp_sensor_registers = {
+	.temp_sensor_ctrl = DRA752_TEMP_SENSOR_CORE_OFFSET,
+	.bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK,
+	.bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK,
+	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
+	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK,
+	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK,
+	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK,
+	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_CORE_OFFSET,
+	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
+	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
+	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
+	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK,
+	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK,
+	.ctrl_dtemp_1 = DRA752_DTEMP_CORE_1_OFFSET,
+	.ctrl_dtemp_2 = DRA752_DTEMP_CORE_2_OFFSET,
+	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET,
+};
+
+/*
+ * DRA752 IVA thermal sensor register offsets and bit-fields
+ */
+static struct temp_sensor_registers
+dra752_iva_temp_sensor_registers = {
+	.temp_sensor_ctrl = DRA752_TEMP_SENSOR_IVA_OFFSET,
+	.bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK,
+	.bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK,
+	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET,
+	.mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK,
+	.mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK,
+	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK,
+	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_IVA_OFFSET,
+	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
+	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
+	.bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET,
+	.status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK,
+	.status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK,
+	.ctrl_dtemp_1 = DRA752_DTEMP_IVA_1_OFFSET,
+	.ctrl_dtemp_2 = DRA752_DTEMP_IVA_2_OFFSET,
+	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET,
+};
+
+/*
+ * DRA752 MPU thermal sensor register offsets and bit-fields
+ */
+static struct temp_sensor_registers
+dra752_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = DRA752_TEMP_SENSOR_MPU_OFFSET,
+	.bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK,
+	.bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK,
+	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
+	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK,
+	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK,
+	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK,
+	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_MPU_OFFSET,
+	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
+	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
+	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
+	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK,
+	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK,
+	.ctrl_dtemp_1 = DRA752_DTEMP_MPU_1_OFFSET,
+	.ctrl_dtemp_2 = DRA752_DTEMP_MPU_2_OFFSET,
+	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET,
+};
+
+/*
+ * DRA752 DSPEVE thermal sensor register offsets and bit-fields
+ */
+static struct temp_sensor_registers
+dra752_dspeve_temp_sensor_registers = {
+	.temp_sensor_ctrl = DRA752_TEMP_SENSOR_DSPEVE_OFFSET,
+	.bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK,
+	.bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK,
+	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET,
+	.mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK,
+	.mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK,
+	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK,
+	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET,
+	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
+	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
+	.bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET,
+	.status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK,
+	.status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK,
+	.ctrl_dtemp_1 = DRA752_DTEMP_DSPEVE_1_OFFSET,
+	.ctrl_dtemp_2 = DRA752_DTEMP_DSPEVE_2_OFFSET,
+	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET,
+};
+
+/*
+ * DRA752 GPU thermal sensor register offsets and bit-fields
+ */
+static struct temp_sensor_registers
+dra752_gpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = DRA752_TEMP_SENSOR_GPU_OFFSET,
+	.bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK,
+	.bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK,
+	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
+	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK,
+	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK,
+	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK,
+	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_GPU_OFFSET,
+	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
+	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
+	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
+	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK,
+	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK,
+	.ctrl_dtemp_1 = DRA752_DTEMP_GPU_1_OFFSET,
+	.ctrl_dtemp_2 = DRA752_DTEMP_GPU_2_OFFSET,
+	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET,
+};
+
+/* Thresholds and limits for DRA752 MPU temperature sensor */
+static struct temp_sensor_data dra752_mpu_temp_sensor_data = {
+	.t_hot = DRA752_MPU_T_HOT,
+	.t_cold = DRA752_MPU_T_COLD,
+	.min_freq = DRA752_MPU_MIN_FREQ,
+	.max_freq = DRA752_MPU_MAX_FREQ,
+};
+
+/* Thresholds and limits for DRA752 GPU temperature sensor */
+static struct temp_sensor_data dra752_gpu_temp_sensor_data = {
+	.t_hot = DRA752_GPU_T_HOT,
+	.t_cold = DRA752_GPU_T_COLD,
+	.min_freq = DRA752_GPU_MIN_FREQ,
+	.max_freq = DRA752_GPU_MAX_FREQ,
+};
+
+/* Thresholds and limits for DRA752 CORE temperature sensor */
+static struct temp_sensor_data dra752_core_temp_sensor_data = {
+	.t_hot = DRA752_CORE_T_HOT,
+	.t_cold = DRA752_CORE_T_COLD,
+	.min_freq = DRA752_CORE_MIN_FREQ,
+	.max_freq = DRA752_CORE_MAX_FREQ,
+};
+
+/* Thresholds and limits for DRA752 DSPEVE temperature sensor */
+static struct temp_sensor_data dra752_dspeve_temp_sensor_data = {
+	.t_hot = DRA752_DSPEVE_T_HOT,
+	.t_cold = DRA752_DSPEVE_T_COLD,
+	.min_freq = DRA752_DSPEVE_MIN_FREQ,
+	.max_freq = DRA752_DSPEVE_MAX_FREQ,
+};
+
+/* Thresholds and limits for DRA752 IVA temperature sensor */
+static struct temp_sensor_data dra752_iva_temp_sensor_data = {
+	.t_hot = DRA752_IVA_T_HOT,
+	.t_cold = DRA752_IVA_T_COLD,
+	.min_freq = DRA752_IVA_MIN_FREQ,
+	.max_freq = DRA752_IVA_MAX_FREQ,
+};
+
+/*
+ * DRA752 : Temperature values in milli degree celsius
+ * ADC code values from 540 to 945
+ */
+static
+int dra752_adc_to_temp[DRA752_ADC_END_VALUE - DRA752_ADC_START_VALUE + 1] = {
+	/* Index 540 - 549 */
+	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
+	-37800,
+	/* Index 550 - 559 */
+	-37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200, -33800,
+	-33400,
+	/* Index 560 - 569 */
+	-33000, -32600, -32200, -31800, -31400, -31000, -30600, -30200, -29800,
+	-29400,
+	/* Index 570 - 579 */
+	-29000, -28600, -28200, -27700, -27100, -26600, -26200, -25800, -25400,
+	-25000,
+	/* Index 580 - 589 */
+	-24600, -24200, -23800, -23400, -23000, -22600, -22200, -21800, -21400,
+	-21000,
+	/* Index 590 - 599 */
+	-20500, -19900, -19400, -19000, -18600, -18200, -17800, -17400, -17000,
+	-16600,
+	/* Index 600 - 609 */
+	-16200, -15800, -15400, -15000, -14600, -14200, -13800, -13400, -13000,
+	-12500,
+	/* Index 610 - 619 */
+	-11900, -11400, -11000, -10600, -10200, -9800, -9400, -9000, -8600,
+	-8200,
+	/* Index 620 - 629 */
+	-7800, -7400, -7000, -6600, -6200, -5800, -5400, -5000, -4500,
+	-3900,
+	/* Index 630 - 639 */
+	-3400, -3000, -2600, -2200, -1800, -1400, -1000, -600, -200,
+	200,
+	/* Index 640 - 649 */
+	600, 1000, 1400, 1800, 2200, 2600, 3000, 3400, 3900,
+	4500,
+	/* Index 650 - 659 */
+	5000, 5400, 5800, 6200, 6600, 7000, 7400, 7800, 8200,
+	8600,
+	/* Index 660 - 669 */
+	9000, 9400, 9800, 10200, 10600, 11000, 11400, 11800, 12200,
+	12700,
+	/* Index 670 - 679 */
+	13300, 13800, 14200, 14600, 15000, 15400, 15800, 16200, 16600,
+	17000,
+	/* Index 680 - 689 */
+	17400, 17800, 18200, 18600, 19000, 19400, 19800, 20200, 20600,
+	21000,
+	/* Index 690 - 699 */
+	21400, 21900, 22500, 23000, 23400, 23800, 24200, 24600, 25000,
+	25400,
+	/* Index 700 - 709 */
+	25800, 26200, 26600, 27000, 27400, 27800, 28200, 28600, 29000,
+	29400,
+	/* Index 710 - 719 */
+	29800, 30200, 30600, 31000, 31400, 31900, 32500, 33000, 33400,
+	33800,
+	/* Index 720 - 729 */
+	34200, 34600, 35000, 35400, 35800, 36200, 36600, 37000, 37400,
+	37800,
+	/* Index 730 - 739 */
+	38200, 38600, 39000, 39400, 39800, 40200, 40600, 41000, 41400,
+	41800,
+	/* Index 740 - 749 */
+	42200, 42600, 43100, 43700, 44200, 44600, 45000, 45400, 45800,
+	46200,
+	/* Index 750 - 759 */
+	46600, 47000, 47400, 47800, 48200, 48600, 49000, 49400, 49800,
+	50200,
+	/* Index 760 - 769 */
+	50600, 51000, 51400, 51800, 52200, 52600, 53000, 53400, 53800,
+	54200,
+	/* Index 770 - 779 */
+	54600, 55000, 55400, 55900, 56500, 57000, 57400, 57800, 58200,
+	58600,
+	/* Index 780 - 789 */
+	59000, 59400, 59800, 60200, 60600, 61000, 61400, 61800, 62200,
+	62600,
+	/* Index 790 - 799 */
+	63000, 63400, 63800, 64200, 64600, 65000, 65400, 65800, 66200,
+	66600,
+	/* Index 800 - 809 */
+	67000, 67400, 67800, 68200, 68600, 69000, 69400, 69800, 70200,
+	70600,
+	/* Index 810 - 819 */
+	71000, 71500, 72100, 72600, 73000, 73400, 73800, 74200, 74600,
+	75000,
+	/* Index 820 - 829 */
+	75400, 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600,
+	79000,
+	/* Index 830 - 839 */
+	79400, 79800, 80200, 80600, 81000, 81400, 81800, 82200, 82600,
+	83000,
+	/* Index 840 - 849 */
+	83400, 83800, 84200, 84600, 85000, 85400, 85800, 86200, 86600,
+	87000,
+	/* Index 850 - 859 */
+	87400, 87800, 88200, 88600, 89000, 89400, 89800, 90200, 90600,
+	91000,
+	/* Index 860 - 869 */
+	91400, 91800, 92200, 92600, 93000, 93400, 93800, 94200, 94600,
+	95000,
+	/* Index 870 - 879 */
+	95400, 95800, 96200, 96600, 97000, 97500, 98100, 98600, 99000,
+	99400,
+	/* Index 880 - 889 */
+	99800, 100200, 100600, 101000, 101400, 101800, 102200, 102600, 103000,
+	103400,
+	/* Index 890 - 899 */
+	103800, 104200, 104600, 105000, 105400, 105800, 106200, 106600, 107000,
+	107400,
+	/* Index 900 - 909 */
+	107800, 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000,
+	111400,
+	/* Index 910 - 919 */
+	111800, 112200, 112600, 113000, 113400, 113800, 114200, 114600, 115000,
+	115400,
+	/* Index 920 - 929 */
+	115800, 116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000,
+	119400,
+	/* Index 930 - 939 */
+	119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
+	123400,
+	/* Index 940 - 945 */
+	123800, 124200, 124600, 124900, 125000, 125000,
+};
+
+/* DRA752 data */
+const struct ti_bandgap_data dra752_data = {
+	.features = TI_BANDGAP_FEATURE_FREEZE_BIT |
+			TI_BANDGAP_FEATURE_TALERT |
+			TI_BANDGAP_FEATURE_COUNTER_DELAY |
+			TI_BANDGAP_FEATURE_HISTORY_BUFFER |
+			TI_BANDGAP_FEATURE_ERRATA_814,
+	.fclock_name = "l3instr_ts_gclk_div",
+	.div_ck_name = "l3instr_ts_gclk_div",
+	.conv_table = dra752_adc_to_temp,
+	.adc_start_val = DRA752_ADC_START_VALUE,
+	.adc_end_val = DRA752_ADC_END_VALUE,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+	.sensors = {
+		{
+		.registers = &dra752_mpu_temp_sensor_registers,
+		.ts_data = &dra752_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.register_cooling = ti_thermal_register_cpu_cooling,
+		.unregister_cooling = ti_thermal_unregister_cpu_cooling,
+		.slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB,
+		.constant_pcb = DRA752_GRADIENT_CONST_W_PCB,
+		},
+		{
+		.registers = &dra752_gpu_temp_sensor_registers,
+		.ts_data = &dra752_gpu_temp_sensor_data,
+		.domain = "gpu",
+		.slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB,
+		.constant_pcb = DRA752_GRADIENT_CONST_W_PCB,
+		},
+		{
+		.registers = &dra752_core_temp_sensor_registers,
+		.ts_data = &dra752_core_temp_sensor_data,
+		.domain = "core",
+		.slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB,
+		.constant_pcb = DRA752_GRADIENT_CONST_W_PCB,
+		},
+		{
+		.registers = &dra752_dspeve_temp_sensor_registers,
+		.ts_data = &dra752_dspeve_temp_sensor_data,
+		.domain = "dspeve",
+		.slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB,
+		.constant_pcb = DRA752_GRADIENT_CONST_W_PCB,
+		},
+		{
+		.registers = &dra752_iva_temp_sensor_registers,
+		.ts_data = &dra752_iva_temp_sensor_data,
+		.domain = "iva",
+		.slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB,
+		.constant_pcb = DRA752_GRADIENT_CONST_W_PCB,
+		},
+	},
+	.sensor_count = 5,
+};
diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
new file mode 100644
index 000000000..72e1ff270
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP3 thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Copyright (C) 2014 Pavel Machek <pavel@ucw.cz>
+ *
+ * Note
+ * http://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
+ * 3.1.1.186 MMC OCP Clock Not Gated When Thermal Sensor Is Used"
+ *
+ * Also TI says:
+ * Just be careful when you try to make thermal policy like decisions
+ * based on this sensor. Placement of the sensor w.r.t the actual logic
+ * generating heat has to be a factor as well. If you are just looking
+ * for an approximation temperature (thermometerish kind), you might be
+ * ok with this. I am not sure we'd find any TI data around this.. just a
+ * heads up.
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+
+/*
+ * OMAP34XX has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap34xx_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = 0,
+	.bgap_soc_mask = BIT(8),
+	.bgap_eocz_mask = BIT(7),
+	.bgap_dtemp_mask = 0x7f,
+
+	.bgap_mode_ctrl = 0,
+	.mode_ctrl_mask = BIT(9),
+};
+
+/* Thresholds and limits for OMAP34XX MPU temperature sensor */
+static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
+	.min_freq = 32768,
+	.max_freq = 32768,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ */
+static const int
+omap34xx_adc_to_temp[128] = {
+	-40000, -40000, -40000, -40000, -40000, -39000, -38000, -36000,
+	-34000, -32000, -31000,	-29000, -28000, -26000, -25000, -24000,
+	-22000, -21000, -19000, -18000, -17000, -15000,	-14000, -12000,
+	-11000, -9000, -8000, -7000, -5000, -4000, -2000, -1000, 0000,
+	1000, 3000, 4000, 5000, 7000, 8000, 10000, 11000, 13000, 14000,
+	15000, 17000, 18000, 20000, 21000, 22000, 24000, 25000, 27000,
+	28000, 30000, 31000, 32000, 34000, 35000, 37000, 38000, 39000,
+	41000, 42000, 44000, 45000, 47000, 48000, 49000, 51000, 52000,
+	53000, 55000, 56000, 58000, 59000, 60000, 62000, 63000, 65000,
+	66000, 67000, 69000, 70000, 72000, 73000, 74000, 76000, 77000,
+	79000, 80000, 81000, 83000, 84000, 85000, 87000, 88000, 89000,
+	91000, 92000, 94000, 95000, 96000, 98000, 99000, 100000,
+	102000, 103000, 105000, 106000, 107000, 109000, 110000, 111000,
+	113000, 114000, 116000, 117000, 118000, 120000, 121000, 122000,
+	124000, 124000, 125000, 125000, 125000, 125000,	125000
+};
+
+/* OMAP34XX data */
+const struct ti_bandgap_data omap34xx_data = {
+	.features = TI_BANDGAP_FEATURE_CLK_CTRL | TI_BANDGAP_FEATURE_UNRELIABLE,
+	.fclock_name = "ts_fck",
+	.div_ck_name = "ts_fck",
+	.conv_table = omap34xx_adc_to_temp,
+	.adc_start_val = 0,
+	.adc_end_val = 127,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+
+	.sensors = {
+		{
+		.registers = &omap34xx_mpu_temp_sensor_registers,
+		.ts_data = &omap34xx_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.slope_pcb = 0,
+		.constant_pcb = 20000,
+		.register_cooling = NULL,
+		.unregister_cooling = NULL,
+		},
+	},
+	.sensor_count = 1,
+};
+
+/*
+ * OMAP36XX has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap36xx_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = 0,
+	.bgap_soc_mask = BIT(9),
+	.bgap_eocz_mask = BIT(8),
+	.bgap_dtemp_mask = 0xFF,
+
+	.bgap_mode_ctrl = 0,
+	.mode_ctrl_mask = BIT(10),
+};
+
+/* Thresholds and limits for OMAP36XX MPU temperature sensor */
+static struct temp_sensor_data omap36xx_mpu_temp_sensor_data = {
+	.min_freq = 32768,
+	.max_freq = 32768,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ */
+static const int
+omap36xx_adc_to_temp[128] = {
+	-40000, -40000, -40000, -40000, -40000, -40000, -40000, -40000,
+	-40000, -40000, -40000,	-40000, -40000, -38000, -35000, -34000,
+	-32000, -30000, -28000, -26000, -24000, -22000,	-20000, -18500,
+	-17000, -15000, -13500, -12000, -10000, -8000, -6500, -5000, -3500,
+	-1500, 0, 2000, 3500, 5000, 6500, 8500, 10000, 12000, 13500,
+	15000, 17000, 19000, 21000, 23000, 25000, 27000, 28500, 30000,
+	32000, 33500, 35000, 37000, 38500, 40000, 42000, 43500, 45000,
+	47000, 48500, 50000, 52000, 53500, 55000, 57000, 58500, 60000,
+	62000, 64000, 66000, 68000, 70000, 71500, 73500, 75000, 77000,
+	78500, 80000, 82000, 83500, 85000, 87000, 88500, 90000, 92000,
+	93500, 95000, 97000, 98500, 100000, 102000, 103500, 105000, 107000,
+	109000, 111000, 113000, 115000, 117000, 118500, 120000, 122000,
+	123500, 125000, 125000, 125000, 125000, 125000, 125000, 125000,
+	125000, 125000, 125000, 125000, 125000, 125000, 125000, 125000,
+	125000, 125000, 125000, 125000, 125000, 125000,	125000
+};
+
+/* OMAP36XX data */
+const struct ti_bandgap_data omap36xx_data = {
+	.features = TI_BANDGAP_FEATURE_CLK_CTRL | TI_BANDGAP_FEATURE_UNRELIABLE,
+	.fclock_name = "ts_fck",
+	.div_ck_name = "ts_fck",
+	.conv_table = omap36xx_adc_to_temp,
+	.adc_start_val = 0,
+	.adc_end_val = 127,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+
+	.sensors = {
+		{
+		.registers = &omap36xx_mpu_temp_sensor_registers,
+		.ts_data = &omap36xx_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.slope_pcb = 0,
+		.constant_pcb = 20000,
+		.register_cooling = NULL,
+		.unregister_cooling = NULL,
+		},
+	},
+	.sensor_count = 1,
+};
diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
new file mode 100644
index 000000000..b4ef7340a
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP4 thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Contact:
+ *	Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+#include "omap4xxx-bandgap.h"
+
+/*
+ * OMAP4430 has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap4430_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
+	.bgap_tempsoff_mask = OMAP4430_BGAP_TEMPSOFF_MASK,
+	.bgap_soc_mask = OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK,
+	.bgap_eocz_mask = OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
+
+	.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
+	.mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
+
+	.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
+};
+
+/* Thresholds and limits for OMAP4430 MPU temperature sensor */
+static struct temp_sensor_data omap4430_mpu_temp_sensor_data = {
+	.min_freq = OMAP4430_MIN_FREQ,
+	.max_freq = OMAP4430_MAX_FREQ,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ * ADC code values from 13 to 107, see TRM
+ * "18.4.10.2.3 ADC Codes Versus Temperature".
+ */
+static const int
+omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = {
+	-40000, -38000, -35000, -34000, -32000, -30000, -28000, -26000, -24000,
+	-22000,	-20000, -18500, -17000, -15000, -13500, -12000, -10000, -8000,
+	-6500, -5000, -3500, -1500, 0, 2000, 3500, 5000, 6500, 8500, 10000,
+	12000, 13500, 15000, 17000, 19000, 21000, 23000, 25000, 27000, 28500,
+	30000, 32000, 33500, 35000, 37000, 38500, 40000, 42000, 43500, 45000,
+	47000, 48500, 50000, 52000, 53500, 55000, 57000, 58500, 60000, 62000,
+	64000, 66000, 68000, 70000, 71500, 73500, 75000, 77000, 78500, 80000,
+	82000, 83500, 85000, 87000, 88500, 90000, 92000, 93500, 95000, 97000,
+	98500, 100000, 102000, 103500, 105000, 107000, 109000, 111000, 113000,
+	115000, 117000, 118500, 120000, 122000, 123500, 125000,
+};
+
+/* OMAP4430 data */
+const struct ti_bandgap_data omap4430_data = {
+	.features = TI_BANDGAP_FEATURE_MODE_CONFIG |
+			TI_BANDGAP_FEATURE_CLK_CTRL |
+			TI_BANDGAP_FEATURE_POWER_SWITCH |
+			TI_BANDGAP_FEATURE_CONT_MODE_ONLY,
+	.fclock_name = "bandgap_fclk",
+	.div_ck_name = "bandgap_fclk",
+	.conv_table = omap4430_adc_to_temp,
+	.adc_start_val = OMAP4430_ADC_START_VALUE,
+	.adc_end_val = OMAP4430_ADC_END_VALUE,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+	.sensors = {
+		{
+		.registers = &omap4430_mpu_temp_sensor_registers,
+		.ts_data = &omap4430_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4430,
+		.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4430,
+		.register_cooling = ti_thermal_register_cpu_cooling,
+		.unregister_cooling = ti_thermal_unregister_cpu_cooling,
+		},
+	},
+	.sensor_count = 1,
+};
+/*
+ * OMAP4460 has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap4460_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = OMAP4460_TEMP_SENSOR_CTRL_OFFSET,
+	.bgap_tempsoff_mask = OMAP4460_BGAP_TEMPSOFF_MASK,
+	.bgap_soc_mask = OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK,
+	.bgap_eocz_mask = OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK,
+
+	.bgap_mask_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
+	.mask_hot_mask = OMAP4460_MASK_HOT_MASK,
+	.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
+
+	.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
+	.mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
+
+	.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
+	.counter_mask = OMAP4460_COUNTER_MASK,
+
+	.bgap_threshold = OMAP4460_BGAP_THRESHOLD_OFFSET,
+	.threshold_thot_mask = OMAP4460_T_HOT_MASK,
+	.threshold_tcold_mask = OMAP4460_T_COLD_MASK,
+
+	.tshut_threshold = OMAP4460_BGAP_TSHUT_OFFSET,
+	.tshut_hot_mask = OMAP4460_TSHUT_HOT_MASK,
+	.tshut_cold_mask = OMAP4460_TSHUT_COLD_MASK,
+
+	.bgap_status = OMAP4460_BGAP_STATUS_OFFSET,
+	.status_hot_mask = OMAP4460_HOT_FLAG_MASK,
+	.status_cold_mask = OMAP4460_COLD_FLAG_MASK,
+
+	.bgap_efuse = OMAP4460_FUSE_OPP_BGAP,
+};
+
+/* Thresholds and limits for OMAP4460 MPU temperature sensor */
+static struct temp_sensor_data omap4460_mpu_temp_sensor_data = {
+	.tshut_hot = OMAP4460_TSHUT_HOT,
+	.tshut_cold = OMAP4460_TSHUT_COLD,
+	.t_hot = OMAP4460_T_HOT,
+	.t_cold = OMAP4460_T_COLD,
+	.min_freq = OMAP4460_MIN_FREQ,
+	.max_freq = OMAP4460_MAX_FREQ,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ * ADC code values from 530 to 923
+ */
+static const int
+omap4460_adc_to_temp[OMAP4460_ADC_END_VALUE - OMAP4460_ADC_START_VALUE + 1] = {
+	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
+	-37800, -37300, -36800, -36400, -36000, -35600, -35200, -34800,
+	-34300, -33800, -33400, -33000, -32600, -32200, -31800, -31300,
+	-30800, -30400, -30000, -29600, -29200, -28700, -28200, -27800,
+	-27400, -27000, -26600, -26200, -25700, -25200, -24800, -24400,
+	-24000, -23600, -23200, -22700, -22200, -21800, -21400, -21000,
+	-20600, -20200, -19700, -19200, -18800, -18400, -18000, -17600,
+	-17200, -16700, -16200, -15800, -15400, -15000, -14600, -14200,
+	-13700, -13200, -12800, -12400, -12000, -11600, -11200, -10700,
+	-10200, -9800, -9400, -9000, -8600, -8200, -7700, -7200, -6800,
+	-6400, -6000, -5600, -5200, -4800, -4300, -3800, -3400, -3000,
+	-2600, -2200, -1800, -1300, -800, -400, 0, 400, 800, 1200, 1600,
+	2100, 2600, 3000, 3400, 3800, 4200, 4600, 5100, 5600, 6000, 6400,
+	6800, 7200, 7600, 8000, 8500, 9000, 9400, 9800, 10200, 10600, 11000,
+	11400, 11900, 12400, 12800, 13200, 13600, 14000, 14400, 14800,
+	15300, 15800, 16200, 16600, 17000, 17400, 17800, 18200, 18700,
+	19200, 19600, 20000, 20400, 20800, 21200, 21600, 22100, 22600,
+	23000, 23400, 23800, 24200, 24600, 25000, 25400, 25900, 26400,
+	26800, 27200, 27600, 28000, 28400, 28800, 29300, 29800, 30200,
+	30600, 31000, 31400, 31800, 32200, 32600, 33100, 33600, 34000,
+	34400, 34800, 35200, 35600, 36000, 36400, 36800, 37300, 37800,
+	38200, 38600, 39000, 39400, 39800, 40200, 40600, 41100, 41600,
+	42000, 42400, 42800, 43200, 43600, 44000, 44400, 44800, 45300,
+	45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600, 49000,
+	49500, 50000, 50400, 50800, 51200, 51600, 52000, 52400, 52800,
+	53200, 53700, 54200, 54600, 55000, 55400, 55800, 56200, 56600,
+	57000, 57400, 57800, 58200, 58700, 59200, 59600, 60000, 60400,
+	60800, 61200, 61600, 62000, 62400, 62800, 63300, 63800, 64200,
+	64600, 65000, 65400, 65800, 66200, 66600, 67000, 67400, 67800,
+	68200, 68700, 69200, 69600, 70000, 70400, 70800, 71200, 71600,
+	72000, 72400, 72800, 73200, 73600, 74100, 74600, 75000, 75400,
+	75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, 79000,
+	79400, 79800, 80300, 80800, 81200, 81600, 82000, 82400, 82800,
+	83200, 83600, 84000, 84400, 84800, 85200, 85600, 86000, 86400,
+	86800, 87300, 87800, 88200, 88600, 89000, 89400, 89800, 90200,
+	90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400, 93800,
+	94200, 94600, 95000, 95500, 96000, 96400, 96800, 97200, 97600,
+	98000, 98400, 98800, 99200, 99600, 100000, 100400, 100800, 101200,
+	101600, 102000, 102400, 102800, 103200, 103600, 104000, 104400,
+	104800, 105200, 105600, 106100, 106600, 107000, 107400, 107800,
+	108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000,
+	111400, 111800, 112200, 112600, 113000, 113400, 113800, 114200,
+	114600, 115000, 115400, 115800, 116200, 116600, 117000, 117400,
+	117800, 118200, 118600, 119000, 119400, 119800, 120200, 120600,
+	121000, 121400, 121800, 122200, 122600, 123000, 123400, 123800, 124200,
+	124600, 124900, 125000, 125000, 125000, 125000
+};
+
+/* OMAP4460 data */
+const struct ti_bandgap_data omap4460_data = {
+	.features = TI_BANDGAP_FEATURE_TSHUT |
+			TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+			TI_BANDGAP_FEATURE_TALERT |
+			TI_BANDGAP_FEATURE_MODE_CONFIG |
+			TI_BANDGAP_FEATURE_POWER_SWITCH |
+			TI_BANDGAP_FEATURE_CLK_CTRL |
+			TI_BANDGAP_FEATURE_COUNTER,
+	.fclock_name = "bandgap_ts_fclk",
+	.div_ck_name = "div_ts_ck",
+	.conv_table = omap4460_adc_to_temp,
+	.adc_start_val = OMAP4460_ADC_START_VALUE,
+	.adc_end_val = OMAP4460_ADC_END_VALUE,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+	.report_temperature = ti_thermal_report_sensor_temperature,
+	.sensors = {
+		{
+		.registers = &omap4460_mpu_temp_sensor_registers,
+		.ts_data = &omap4460_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4460,
+		.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4460,
+		.register_cooling = ti_thermal_register_cpu_cooling,
+		.unregister_cooling = ti_thermal_unregister_cpu_cooling,
+		},
+	},
+	.sensor_count = 1,
+};
+
+/* OMAP4470 data */
+const struct ti_bandgap_data omap4470_data = {
+	.features = TI_BANDGAP_FEATURE_TSHUT |
+			TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+			TI_BANDGAP_FEATURE_TALERT |
+			TI_BANDGAP_FEATURE_MODE_CONFIG |
+			TI_BANDGAP_FEATURE_POWER_SWITCH |
+			TI_BANDGAP_FEATURE_CLK_CTRL |
+			TI_BANDGAP_FEATURE_COUNTER,
+	.fclock_name = "bandgap_ts_fclk",
+	.div_ck_name = "div_ts_ck",
+	.conv_table = omap4460_adc_to_temp,
+	.adc_start_val = OMAP4460_ADC_START_VALUE,
+	.adc_end_val = OMAP4460_ADC_END_VALUE,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+	.report_temperature = ti_thermal_report_sensor_temperature,
+	.sensors = {
+		{
+		.registers = &omap4460_mpu_temp_sensor_registers,
+		.ts_data = &omap4460_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4470,
+		.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4470,
+		.register_cooling = ti_thermal_register_cpu_cooling,
+		.unregister_cooling = ti_thermal_unregister_cpu_cooling,
+		},
+	},
+	.sensor_count = 1,
+};
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
new file mode 100644
index 000000000..c63f439e0
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OMAP4xxx bandgap registers, bitfields and temperature definitions
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#ifndef __OMAP4XXX_BANDGAP_H
+#define __OMAP4XXX_BANDGAP_H
+
+/**
+ * *** OMAP4430 ***
+ *
+ * Below, in sequence, are the Register definitions,
+ * the bitfields and the temperature definitions for OMAP4430.
+ */
+
+/**
+ * OMAP4430 register definitions
+ *
+ * Registers are defined as offsets. The offsets are
+ * relative to FUSE_OPP_BGAP on 4430.
+ */
+
+/* OMAP4430.FUSE_OPP_BGAP */
+#define OMAP4430_FUSE_OPP_BGAP				0x0
+
+/* OMAP4430.TEMP_SENSOR  */
+#define OMAP4430_TEMP_SENSOR_CTRL_OFFSET		0xCC
+
+/**
+ * Register and bit definitions for OMAP4430
+ *
+ * All the macros bellow define the required bits for
+ * controlling temperature on OMAP4430. Bit defines are
+ * grouped by register.
+ */
+
+/* OMAP4430.TEMP_SENSOR bits */
+#define OMAP4430_BGAP_TEMPSOFF_MASK			BIT(12)
+#define OMAP4430_BGAP_TSHUT_MASK			BIT(11)
+#define OMAP4430_CONTINUOUS_MODE_MASK			BIT(10)
+#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK		BIT(9)
+#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK		BIT(8)
+#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
+
+/**
+ * Temperature limits and thresholds for OMAP4430
+ *
+ * All the macros bellow are definitions for handling the
+ * ADC conversions and representation of temperature limits
+ * and thresholds for OMAP4430.
+ */
+
+/*
+ * ADC conversion table limits. Ignore values outside the TRM listed
+ * range to avoid bogus thermal shutdowns. See omap4430 TRM chapter
+ * "18.4.10.2.3 ADC Codes Versus Temperature".
+ */
+#define OMAP4430_ADC_START_VALUE			13
+#define OMAP4430_ADC_END_VALUE				107
+/* bandgap clock limits (no control on 4430) */
+#define OMAP4430_MAX_FREQ				32768
+#define OMAP4430_MIN_FREQ				32768
+
+/**
+ * *** OMAP4460 *** Applicable for OMAP4470
+ *
+ * Below, in sequence, are the Register definitions,
+ * the bitfields and the temperature definitions for OMAP4460.
+ */
+
+/**
+ * OMAP4460 register definitions
+ *
+ * Registers are defined as offsets. The offsets are
+ * relative to FUSE_OPP_BGAP on 4460.
+ */
+
+/* OMAP4460.FUSE_OPP_BGAP */
+#define OMAP4460_FUSE_OPP_BGAP				0x0
+
+/* OMAP4460.TEMP_SENSOR */
+#define OMAP4460_TEMP_SENSOR_CTRL_OFFSET		0xCC
+
+/* OMAP4460.BANDGAP_CTRL */
+#define OMAP4460_BGAP_CTRL_OFFSET			0x118
+
+/* OMAP4460.BANDGAP_COUNTER */
+#define OMAP4460_BGAP_COUNTER_OFFSET			0x11C
+
+/* OMAP4460.BANDGAP_THRESHOLD */
+#define OMAP4460_BGAP_THRESHOLD_OFFSET			0x120
+
+/* OMAP4460.TSHUT_THRESHOLD */
+#define OMAP4460_BGAP_TSHUT_OFFSET			0x124
+
+/* OMAP4460.BANDGAP_STATUS */
+#define OMAP4460_BGAP_STATUS_OFFSET			0x128
+
+/**
+ * Register bitfields for OMAP4460
+ *
+ * All the macros bellow define the required bits for
+ * controlling temperature on OMAP4460. Bit defines are
+ * grouped by register.
+ */
+/* OMAP4460.TEMP_SENSOR bits */
+#define OMAP4460_BGAP_TEMPSOFF_MASK			BIT(13)
+#define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK		BIT(11)
+#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK		BIT(10)
+#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
+
+/* OMAP4460.BANDGAP_CTRL bits */
+#define OMAP4460_CONTINUOUS_MODE_MASK			BIT(31)
+#define OMAP4460_MASK_HOT_MASK				BIT(1)
+#define OMAP4460_MASK_COLD_MASK				BIT(0)
+
+/* OMAP4460.BANDGAP_COUNTER bits */
+#define OMAP4460_COUNTER_MASK				(0xffffff << 0)
+
+/* OMAP4460.BANDGAP_THRESHOLD bits */
+#define OMAP4460_T_HOT_MASK				(0x3ff << 16)
+#define OMAP4460_T_COLD_MASK				(0x3ff << 0)
+
+/* OMAP4460.TSHUT_THRESHOLD bits */
+#define OMAP4460_TSHUT_HOT_MASK				(0x3ff << 16)
+#define OMAP4460_TSHUT_COLD_MASK			(0x3ff << 0)
+
+/* OMAP4460.BANDGAP_STATUS bits */
+#define OMAP4460_HOT_FLAG_MASK				BIT(1)
+#define OMAP4460_COLD_FLAG_MASK				BIT(0)
+
+/**
+ * Temperature limits and thresholds for OMAP4460
+ *
+ * All the macros bellow are definitions for handling the
+ * ADC conversions and representation of temperature limits
+ * and thresholds for OMAP4460.
+ */
+
+/* ADC conversion table limits */
+#define OMAP4460_ADC_START_VALUE			530
+#define OMAP4460_ADC_END_VALUE				932
+/* bandgap clock limits */
+#define OMAP4460_MAX_FREQ				1500000
+#define OMAP4460_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define OMAP4460_TSHUT_HOT				900	/* 122 deg C */
+#define OMAP4460_TSHUT_COLD				895	/* 100 deg C */
+#define OMAP4460_T_HOT					800	/* 73 deg C */
+#define OMAP4460_T_COLD					795	/* 71 deg C */
+
+#endif /* __OMAP4XXX_BANDGAP_H */
diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
new file mode 100644
index 000000000..69bc89bcd
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP5 thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Contact:
+ *	Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+#include "omap5xxx-bandgap.h"
+
+/*
+ * OMAP5430 has three instances of thermal sensor for MPU, GPU & CORE,
+ * need to describe the individual registers and bit fields.
+ */
+
+/*
+ * OMAP5430 MPU thermal sensor register offset and bit-fields
+ */
+static struct temp_sensor_registers
+omap5430_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = OMAP5430_TEMP_SENSOR_MPU_OFFSET,
+	.bgap_tempsoff_mask = OMAP5430_BGAP_TEMPSOFF_MASK,
+	.bgap_eocz_mask = OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK,
+
+	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
+	.mask_hot_mask = OMAP5430_MASK_HOT_MPU_MASK,
+	.mask_cold_mask = OMAP5430_MASK_COLD_MPU_MASK,
+	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = OMAP5430_MASK_FREEZE_MPU_MASK,
+
+	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
+	.counter_mask = OMAP5430_COUNTER_MASK,
+
+	.bgap_threshold = OMAP5430_BGAP_THRESHOLD_MPU_OFFSET,
+	.threshold_thot_mask = OMAP5430_T_HOT_MASK,
+	.threshold_tcold_mask = OMAP5430_T_COLD_MASK,
+
+	.tshut_threshold = OMAP5430_BGAP_TSHUT_MPU_OFFSET,
+	.tshut_hot_mask = OMAP5430_TSHUT_HOT_MASK,
+	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
+
+	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
+	.status_hot_mask = OMAP5430_HOT_MPU_FLAG_MASK,
+	.status_cold_mask = OMAP5430_COLD_MPU_FLAG_MASK,
+
+	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_MPU_1_OFFSET,
+	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_MPU_2_OFFSET,
+	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_MPU,
+};
+
+/*
+ * OMAP5430 GPU thermal sensor register offset and bit-fields
+ */
+static struct temp_sensor_registers
+omap5430_gpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = OMAP5430_TEMP_SENSOR_GPU_OFFSET,
+	.bgap_tempsoff_mask = OMAP5430_BGAP_TEMPSOFF_MASK,
+	.bgap_eocz_mask = OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK,
+
+	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
+	.mask_hot_mask = OMAP5430_MASK_HOT_GPU_MASK,
+	.mask_cold_mask = OMAP5430_MASK_COLD_GPU_MASK,
+	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = OMAP5430_MASK_FREEZE_GPU_MASK,
+
+	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
+	.counter_mask = OMAP5430_COUNTER_MASK,
+
+	.bgap_threshold = OMAP5430_BGAP_THRESHOLD_GPU_OFFSET,
+	.threshold_thot_mask = OMAP5430_T_HOT_MASK,
+	.threshold_tcold_mask = OMAP5430_T_COLD_MASK,
+
+	.tshut_threshold = OMAP5430_BGAP_TSHUT_GPU_OFFSET,
+	.tshut_hot_mask = OMAP5430_TSHUT_HOT_MASK,
+	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
+
+	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
+	.status_hot_mask = OMAP5430_HOT_GPU_FLAG_MASK,
+	.status_cold_mask = OMAP5430_COLD_GPU_FLAG_MASK,
+
+	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_GPU_1_OFFSET,
+	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_GPU_2_OFFSET,
+
+	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_GPU,
+};
+
+/*
+ * OMAP5430 CORE thermal sensor register offset and bit-fields
+ */
+static struct temp_sensor_registers
+omap5430_core_temp_sensor_registers = {
+	.temp_sensor_ctrl = OMAP5430_TEMP_SENSOR_CORE_OFFSET,
+	.bgap_tempsoff_mask = OMAP5430_BGAP_TEMPSOFF_MASK,
+	.bgap_eocz_mask = OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK,
+	.bgap_dtemp_mask = OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK,
+
+	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
+	.mask_hot_mask = OMAP5430_MASK_HOT_CORE_MASK,
+	.mask_cold_mask = OMAP5430_MASK_COLD_CORE_MASK,
+	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
+	.mask_freeze_mask = OMAP5430_MASK_FREEZE_CORE_MASK,
+
+	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
+	.counter_mask = OMAP5430_COUNTER_MASK,
+
+	.bgap_threshold = OMAP5430_BGAP_THRESHOLD_CORE_OFFSET,
+	.threshold_thot_mask = OMAP5430_T_HOT_MASK,
+	.threshold_tcold_mask = OMAP5430_T_COLD_MASK,
+
+	.tshut_threshold = OMAP5430_BGAP_TSHUT_CORE_OFFSET,
+	.tshut_hot_mask = OMAP5430_TSHUT_HOT_MASK,
+	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
+
+	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
+	.status_hot_mask = OMAP5430_HOT_CORE_FLAG_MASK,
+	.status_cold_mask = OMAP5430_COLD_CORE_FLAG_MASK,
+
+	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_CORE_1_OFFSET,
+	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_CORE_2_OFFSET,
+
+	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_CORE,
+};
+
+/* Thresholds and limits for OMAP5430 MPU temperature sensor */
+static struct temp_sensor_data omap5430_mpu_temp_sensor_data = {
+	.tshut_hot = OMAP5430_MPU_TSHUT_HOT,
+	.tshut_cold = OMAP5430_MPU_TSHUT_COLD,
+	.t_hot = OMAP5430_MPU_T_HOT,
+	.t_cold = OMAP5430_MPU_T_COLD,
+	.min_freq = OMAP5430_MPU_MIN_FREQ,
+	.max_freq = OMAP5430_MPU_MAX_FREQ,
+};
+
+/* Thresholds and limits for OMAP5430 GPU temperature sensor */
+static struct temp_sensor_data omap5430_gpu_temp_sensor_data = {
+	.tshut_hot = OMAP5430_GPU_TSHUT_HOT,
+	.tshut_cold = OMAP5430_GPU_TSHUT_COLD,
+	.t_hot = OMAP5430_GPU_T_HOT,
+	.t_cold = OMAP5430_GPU_T_COLD,
+	.min_freq = OMAP5430_GPU_MIN_FREQ,
+	.max_freq = OMAP5430_GPU_MAX_FREQ,
+};
+
+/* Thresholds and limits for OMAP5430 CORE temperature sensor */
+static struct temp_sensor_data omap5430_core_temp_sensor_data = {
+	.tshut_hot = OMAP5430_CORE_TSHUT_HOT,
+	.tshut_cold = OMAP5430_CORE_TSHUT_COLD,
+	.t_hot = OMAP5430_CORE_T_HOT,
+	.t_cold = OMAP5430_CORE_T_COLD,
+	.min_freq = OMAP5430_CORE_MIN_FREQ,
+	.max_freq = OMAP5430_CORE_MAX_FREQ,
+};
+
+/*
+ * OMAP54xx ES2.0 : Temperature values in milli degree celsius
+ * ADC code values from 540 to 945
+ */
+static int
+omap5430_adc_to_temp[
+	OMAP5430_ADC_END_VALUE - OMAP5430_ADC_START_VALUE + 1] = {
+	/* Index 540 - 549 */
+	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
+	-37800,
+	/* Index 550 - 559 */
+	-37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200, -33800,
+	-33400,
+	/* Index 560 - 569 */
+	-33000, -32600, -32200, -31800, -31400, -31000, -30600, -30200, -29800,
+	-29400,
+	/* Index 570 - 579 */
+	-29000, -28600, -28200, -27700, -27100, -26600, -26200, -25800, -25400,
+	-25000,
+	/* Index 580 - 589 */
+	-24600, -24200, -23800, -23400, -23000, -22600, -22200, -21600, -21400,
+	-21000,
+	/* Index 590 - 599 */
+	-20500, -19900, -19400, -19000, -18600, -18200, -17800, -17400, -17000,
+	-16600,
+	/* Index 600 - 609 */
+	-16200, -15800, -15400, -15000, -14600, -14200, -13800,	-13400, -13000,
+	-12500,
+	/* Index 610 - 619 */
+	-11900, -11400, -11000, -10600, -10200, -9800, -9400, -9000, -8600,
+	-8200,
+	/* Index 620 - 629 */
+	-7800, -7400, -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900,
+	/* Index 630 - 639 */
+	-3400, -3000, -2600, -2200, -1800, -1400, -1000, -600, -200, 200,
+	/* Index 640 - 649 */
+	600, 1000, 1400, 1800, 2200, 2600, 3000, 3400, 3900, 4500,
+	/* Index 650 - 659 */
+	5000, 5400, 5800, 6200, 6600, 7000, 7400, 7800, 8200, 8600,
+	/* Index 660 - 669 */
+	9000, 9400, 9800, 10200, 10600, 11000, 11400, 11800, 12200, 12700,
+	/* Index 670 - 679 */
+	13300, 13800, 14200, 14600, 15000, 15400, 15800, 16200, 16600, 17000,
+	/* Index 680 - 689 */
+	17400, 17800, 18200, 18600, 19000, 19400, 19800, 20200, 20600, 21100,
+	/* Index 690 - 699 */
+	21400, 21900, 22500, 23000, 23400, 23800, 24200, 24600, 25000, 25400,
+	/* Index 700 - 709 */
+	25800, 26200, 26600, 27000, 27400, 27800, 28200, 28600, 29000, 29400,
+	/* Index 710 - 719 */
+	29800, 30200, 30600, 31000, 31400, 31900, 32500, 33000, 33400, 33800,
+	/* Index 720 - 729 */
+	34200, 34600, 35000, 35400, 35800, 36200, 36600, 37000, 37400, 37800,
+	/* Index 730 - 739 */
+	38200, 38600, 39000, 39400, 39800, 40200, 40600, 41000, 41400, 41800,
+	/* Index 740 - 749 */
+	42200, 42600, 43100, 43700, 44200, 44600, 45000, 45400, 45800, 46200,
+	/* Index 750 - 759 */
+	46600, 47000, 47400, 47800, 48200, 48600, 49000, 49400, 49800, 50200,
+	/* Index 760 - 769 */
+	50600, 51000, 51400, 51800, 52200, 52600, 53000, 53400, 53800, 54200,
+	/* Index 770 - 779 */
+	54600, 55000, 55400, 55900, 56500, 57000, 57400, 57800, 58200, 58600,
+	/* Index 780 - 789 */
+	59000, 59400, 59800, 60200, 60600, 61000, 61400, 61800, 62200, 62600,
+	/* Index 790 - 799 */
+	63000, 63400, 63800, 64200, 64600, 65000, 65400, 65800, 66200, 66600,
+	/* Index 800 - 809 */
+	67000, 67400, 67800, 68200, 68600, 69000, 69400, 69800, 70200, 70600,
+	/* Index 810 - 819 */
+	71000, 71500, 72100, 72600, 73000, 73400, 73800, 74200, 74600, 75000,
+	/* Index 820 - 829 */
+	75400, 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, 79000,
+	/* Index 830 - 839 */
+	79400, 79800, 80200, 80600, 81000, 81400, 81800, 82200, 82600, 83000,
+	/* Index 840 - 849 */
+	83400, 83800, 84200, 84600, 85000, 85400, 85800, 86200, 86600, 87000,
+	/* Index 850 - 859 */
+	87400, 87800, 88200, 88600, 89000, 89400, 89800, 90200, 90600, 91000,
+	/* Index 860 - 869 */
+	91400, 91800, 92200, 92600, 93000, 93400, 93800, 94200, 94600, 95000,
+	/* Index 870 - 879 */
+	95400, 95800, 96200, 96600, 97000, 97500, 98100, 98600, 99000, 99400,
+	/* Index 880 - 889 */
+	99800, 100200, 100600, 101000, 101400, 101800, 102200, 102600, 103000,
+	103400,
+	/* Index 890 - 899 */
+	103800, 104200, 104600, 105000, 105400, 105800, 106200, 106600, 107000,
+	107400,
+	/* Index 900 - 909 */
+	107800, 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000,
+	111400,
+	/* Index 910 - 919 */
+	111800, 112200, 112600, 113000, 113400, 113800, 114200, 114600, 115000,
+	115400,
+	/* Index 920 - 929 */
+	115800, 116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000,
+	119400,
+	/* Index 930 - 939 */
+	119800, 120200, 120600, 121000, 121400, 121800, 122400, 122600, 123000,
+	123400,
+	/* Index 940 - 945 */
+	123800, 124200, 124600, 124900, 125000, 125000,
+};
+
+/* OMAP54xx ES2.0 data */
+const struct ti_bandgap_data omap5430_data = {
+	.features = TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+			TI_BANDGAP_FEATURE_FREEZE_BIT |
+			TI_BANDGAP_FEATURE_TALERT |
+			TI_BANDGAP_FEATURE_COUNTER_DELAY |
+			TI_BANDGAP_FEATURE_HISTORY_BUFFER,
+	.fclock_name = "l3instr_ts_gclk_div",
+	.div_ck_name = "l3instr_ts_gclk_div",
+	.conv_table = omap5430_adc_to_temp,
+	.adc_start_val = OMAP5430_ADC_START_VALUE,
+	.adc_end_val = OMAP5430_ADC_END_VALUE,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+	.report_temperature = ti_thermal_report_sensor_temperature,
+	.sensors = {
+		{
+		.registers = &omap5430_mpu_temp_sensor_registers,
+		.ts_data = &omap5430_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.register_cooling = ti_thermal_register_cpu_cooling,
+		.unregister_cooling = ti_thermal_unregister_cpu_cooling,
+		.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU,
+		.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_5430_CPU,
+		},
+		{
+		.registers = &omap5430_gpu_temp_sensor_registers,
+		.ts_data = &omap5430_gpu_temp_sensor_data,
+		.domain = "gpu",
+		.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU,
+		.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_5430_GPU,
+		},
+		{
+		.registers = &omap5430_core_temp_sensor_registers,
+		.ts_data = &omap5430_core_temp_sensor_data,
+		.domain = "core",
+		},
+	},
+	.sensor_count = 3,
+};
diff --git a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
new file mode 100644
index 000000000..3880e667e
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OMAP5xxx bandgap registers, bitfields and temperature definitions
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#ifndef __OMAP5XXX_BANDGAP_H
+#define __OMAP5XXX_BANDGAP_H
+
+/**
+ * *** OMAP5430 ***
+ *
+ * Below, in sequence, are the Register definitions,
+ * the bitfields and the temperature definitions for OMAP5430.
+ */
+
+/**
+ * OMAP5430 register definitions
+ *
+ * Registers are defined as offsets. The offsets are
+ * relative to FUSE_OPP_BGAP_GPU on 5430.
+ *
+ * Register below are grouped by domain (not necessarily in offset order)
+ */
+
+/* OMAP5430.GPU register offsets */
+#define OMAP5430_FUSE_OPP_BGAP_GPU			0x0
+#define OMAP5430_TEMP_SENSOR_GPU_OFFSET			0x150
+#define OMAP5430_BGAP_THRESHOLD_GPU_OFFSET		0x1A8
+#define OMAP5430_BGAP_TSHUT_GPU_OFFSET			0x1B4
+#define OMAP5430_BGAP_DTEMP_GPU_1_OFFSET		0x1F8
+#define OMAP5430_BGAP_DTEMP_GPU_2_OFFSET		0x1FC
+
+/* OMAP5430.MPU register offsets */
+#define OMAP5430_FUSE_OPP_BGAP_MPU			0x4
+#define OMAP5430_TEMP_SENSOR_MPU_OFFSET			0x14C
+#define OMAP5430_BGAP_THRESHOLD_MPU_OFFSET		0x1A4
+#define OMAP5430_BGAP_TSHUT_MPU_OFFSET			0x1B0
+#define OMAP5430_BGAP_DTEMP_MPU_1_OFFSET		0x1E4
+#define OMAP5430_BGAP_DTEMP_MPU_2_OFFSET		0x1E8
+
+/* OMAP5430.MPU register offsets */
+#define OMAP5430_FUSE_OPP_BGAP_CORE			0x8
+#define OMAP5430_TEMP_SENSOR_CORE_OFFSET		0x154
+#define OMAP5430_BGAP_THRESHOLD_CORE_OFFSET		0x1AC
+#define OMAP5430_BGAP_TSHUT_CORE_OFFSET			0x1B8
+#define OMAP5430_BGAP_DTEMP_CORE_1_OFFSET		0x20C
+#define OMAP5430_BGAP_DTEMP_CORE_2_OFFSET		0x210
+
+/* OMAP5430.common register offsets */
+#define OMAP5430_BGAP_CTRL_OFFSET			0x1A0
+#define OMAP5430_BGAP_STATUS_OFFSET			0x1C8
+
+/**
+ * Register bitfields for OMAP5430
+ *
+ * All the macros bellow define the required bits for
+ * controlling temperature on OMAP5430. Bit defines are
+ * grouped by register.
+ */
+
+/* OMAP5430.TEMP_SENSOR */
+#define OMAP5430_BGAP_TEMP_SENSOR_SOC_MASK		BIT(12)
+#define OMAP5430_BGAP_TEMPSOFF_MASK			BIT(11)
+#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK		BIT(10)
+#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
+
+/* OMAP5430.BANDGAP_CTRL */
+#define OMAP5430_MASK_COUNTER_DELAY_MASK		(0x7 << 27)
+#define OMAP5430_MASK_FREEZE_CORE_MASK			BIT(23)
+#define OMAP5430_MASK_FREEZE_GPU_MASK			BIT(22)
+#define OMAP5430_MASK_FREEZE_MPU_MASK			BIT(21)
+#define OMAP5430_MASK_HOT_CORE_MASK			BIT(5)
+#define OMAP5430_MASK_COLD_CORE_MASK			BIT(4)
+#define OMAP5430_MASK_HOT_GPU_MASK			BIT(3)
+#define OMAP5430_MASK_COLD_GPU_MASK			BIT(2)
+#define OMAP5430_MASK_HOT_MPU_MASK			BIT(1)
+#define OMAP5430_MASK_COLD_MPU_MASK			BIT(0)
+
+/* OMAP5430.BANDGAP_COUNTER */
+#define OMAP5430_COUNTER_MASK				(0xffffff << 0)
+
+/* OMAP5430.BANDGAP_THRESHOLD */
+#define OMAP5430_T_HOT_MASK				(0x3ff << 16)
+#define OMAP5430_T_COLD_MASK				(0x3ff << 0)
+
+/* OMAP5430.TSHUT_THRESHOLD */
+#define OMAP5430_TSHUT_HOT_MASK				(0x3ff << 16)
+#define OMAP5430_TSHUT_COLD_MASK			(0x3ff << 0)
+
+/* OMAP5430.BANDGAP_STATUS */
+#define OMAP5430_HOT_CORE_FLAG_MASK			BIT(5)
+#define OMAP5430_COLD_CORE_FLAG_MASK			BIT(4)
+#define OMAP5430_HOT_GPU_FLAG_MASK			BIT(3)
+#define OMAP5430_COLD_GPU_FLAG_MASK			BIT(2)
+#define OMAP5430_HOT_MPU_FLAG_MASK			BIT(1)
+#define OMAP5430_COLD_MPU_FLAG_MASK			BIT(0)
+
+/**
+ * Temperature limits and thresholds for OMAP5430
+ *
+ * All the macros bellow are definitions for handling the
+ * ADC conversions and representation of temperature limits
+ * and thresholds for OMAP5430. Definitions are grouped
+ * by temperature domain.
+ */
+
+/* OMAP5430.common temperature definitions */
+/* ADC conversion table limits */
+#define OMAP5430_ADC_START_VALUE			540
+#define OMAP5430_ADC_END_VALUE				945
+
+/* OMAP5430.GPU temperature definitions */
+/* bandgap clock limits */
+#define OMAP5430_GPU_MAX_FREQ				1500000
+#define OMAP5430_GPU_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define OMAP5430_GPU_TSHUT_HOT				915
+#define OMAP5430_GPU_TSHUT_COLD				900
+#define OMAP5430_GPU_T_HOT				800
+#define OMAP5430_GPU_T_COLD				795
+
+/* OMAP5430.MPU temperature definitions */
+/* bandgap clock limits */
+#define OMAP5430_MPU_MAX_FREQ				1500000
+#define OMAP5430_MPU_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define OMAP5430_MPU_TSHUT_HOT				915
+#define OMAP5430_MPU_TSHUT_COLD				900
+#define OMAP5430_MPU_T_HOT				800
+#define OMAP5430_MPU_T_COLD				795
+
+/* OMAP5430.CORE temperature definitions */
+/* bandgap clock limits */
+#define OMAP5430_CORE_MAX_FREQ				1500000
+#define OMAP5430_CORE_MIN_FREQ				1000000
+/* interrupts thresholds */
+#define OMAP5430_CORE_TSHUT_HOT				915
+#define OMAP5430_CORE_TSHUT_COLD			900
+#define OMAP5430_CORE_T_HOT				800
+#define OMAP5430_CORE_T_COLD				795
+
+#endif /* __OMAP5XXX_BANDGAP_H */
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
new file mode 100644
index 000000000..67050a1a5
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -0,0 +1,1299 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI Bandgap temperature sensor driver
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: J Keerthy <j-keerthy@ti.com>
+ * Author: Moiz Sonasath <m-sonasath@ti.com>
+ * Couple of fixes, DT and MFD adaptation:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu_pm.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/reboot.h>
+#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
+#include <linux/types.h>
+
+#include "ti-bandgap.h"
+
+static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
+#ifdef CONFIG_PM_SLEEP
+static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
+				  unsigned long cmd, void *v);
+#endif
+
+/***   Helper functions to access registers and their bitfields   ***/
+
+/**
+ * ti_bandgap_readl() - simple read helper function
+ * @bgp: pointer to ti_bandgap structure
+ * @reg: desired register (offset) to be read
+ *
+ * Helper function to read bandgap registers. It uses the io remapped area.
+ * Return: the register value.
+ */
+static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
+{
+	return readl(bgp->base + reg);
+}
+
+/**
+ * ti_bandgap_writel() - simple write helper function
+ * @bgp: pointer to ti_bandgap structure
+ * @val: desired register value to be written
+ * @reg: desired register (offset) to be written
+ *
+ * Helper function to write bandgap registers. It uses the io remapped area.
+ */
+static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg)
+{
+	writel(val, bgp->base + reg);
+}
+
+/**
+ * DOC: macro to update bits.
+ *
+ * RMW_BITS() - used to read, modify and update bandgap bitfields.
+ *            The value passed will be shifted.
+ */
+#define RMW_BITS(bgp, id, reg, mask, val)			\
+do {								\
+	struct temp_sensor_registers *t;			\
+	u32 r;							\
+								\
+	t = bgp->conf->sensors[(id)].registers;		\
+	r = ti_bandgap_readl(bgp, t->reg);			\
+	r &= ~t->mask;						\
+	r |= (val) << __ffs(t->mask);				\
+	ti_bandgap_writel(bgp, r, t->reg);			\
+} while (0)
+
+/***   Basic helper functions   ***/
+
+/**
+ * ti_bandgap_power() - controls the power state of a bandgap device
+ * @bgp: pointer to ti_bandgap structure
+ * @on: desired power state (1 - on, 0 - off)
+ *
+ * Used to power on/off a bandgap device instance. Only used on those
+ * that features tempsoff bit.
+ *
+ * Return: 0 on success, -ENOTSUPP if tempsoff is not supported.
+ */
+static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
+{
+	int i;
+
+	if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
+		return -ENOTSUPP;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++)
+		/* active on 0 */
+		RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
+	return 0;
+}
+
+/**
+ * ti_errata814_bandgap_read_temp() - helper function to read dra7 sensor temperature
+ * @bgp: pointer to ti_bandgap structure
+ * @reg: desired register (offset) to be read
+ *
+ * Function to read dra7 bandgap sensor temperature. This is done separately
+ * so as to workaround the errata "Bandgap Temperature read Dtemp can be
+ * corrupted" - Errata ID: i814".
+ * Read accesses to registers listed below can be corrupted due to incorrect
+ * resynchronization between clock domains.
+ * Read access to registers below can be corrupted :
+ * CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4)
+ * CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n
+ *
+ * Return: the register value.
+ */
+static u32 ti_errata814_bandgap_read_temp(struct ti_bandgap *bgp,  u32 reg)
+{
+	u32 val1, val2;
+
+	val1 = ti_bandgap_readl(bgp, reg);
+	val2 = ti_bandgap_readl(bgp, reg);
+
+	/* If both times we read the same value then that is right */
+	if (val1 == val2)
+		return val1;
+
+	/* if val1 and val2 are different read it third time */
+	return ti_bandgap_readl(bgp, reg);
+}
+
+/**
+ * ti_bandgap_read_temp() - helper function to read sensor temperature
+ * @bgp: pointer to ti_bandgap structure
+ * @id: bandgap sensor id
+ *
+ * Function to concentrate the steps to read sensor temperature register.
+ * This function is desired because, depending on bandgap device version,
+ * it might be needed to freeze the bandgap state machine, before fetching
+ * the register value.
+ *
+ * Return: temperature in ADC values.
+ */
+static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
+{
+	struct temp_sensor_registers *tsr;
+	u32 temp, reg;
+
+	tsr = bgp->conf->sensors[id].registers;
+	reg = tsr->temp_sensor_ctrl;
+
+	if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+		RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
+		/*
+		 * In case we cannot read from cur_dtemp / dtemp_0,
+		 * then we read from the last valid temp read
+		 */
+		reg = tsr->ctrl_dtemp_1;
+	}
+
+	/* read temperature */
+	if (TI_BANDGAP_HAS(bgp, ERRATA_814))
+		temp = ti_errata814_bandgap_read_temp(bgp, reg);
+	else
+		temp = ti_bandgap_readl(bgp, reg);
+
+	temp &= tsr->bgap_dtemp_mask;
+
+	if (TI_BANDGAP_HAS(bgp, FREEZE_BIT))
+		RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
+
+	return temp;
+}
+
+/***   IRQ handlers   ***/
+
+/**
+ * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs
+ * @irq: IRQ number
+ * @data: private data (struct ti_bandgap *)
+ *
+ * This is the Talert handler. Use it only if bandgap device features
+ * HAS(TALERT). This handler goes over all sensors and checks their
+ * conditions and acts accordingly. In case there are events pending,
+ * it will reset the event mask to wait for the opposite event (next event).
+ * Every time there is a new event, it will be reported to thermal layer.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
+{
+	struct ti_bandgap *bgp = data;
+	struct temp_sensor_registers *tsr;
+	u32 t_hot = 0, t_cold = 0, ctrl;
+	int i;
+
+	spin_lock(&bgp->lock);
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		tsr = bgp->conf->sensors[i].registers;
+		ctrl = ti_bandgap_readl(bgp, tsr->bgap_status);
+
+		/* Read the status of t_hot */
+		t_hot = ctrl & tsr->status_hot_mask;
+
+		/* Read the status of t_cold */
+		t_cold = ctrl & tsr->status_cold_mask;
+
+		if (!t_cold && !t_hot)
+			continue;
+
+		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+		/*
+		 * One TALERT interrupt: Two sources
+		 * If the interrupt is due to t_hot then mask t_hot and
+		 * unmask t_cold else mask t_cold and unmask t_hot
+		 */
+		if (t_hot) {
+			ctrl &= ~tsr->mask_hot_mask;
+			ctrl |= tsr->mask_cold_mask;
+		} else if (t_cold) {
+			ctrl &= ~tsr->mask_cold_mask;
+			ctrl |= tsr->mask_hot_mask;
+		}
+
+		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
+
+		dev_dbg(bgp->dev,
+			"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
+			__func__, bgp->conf->sensors[i].domain,
+			t_hot, t_cold);
+
+		/* report temperature to whom may concern */
+		if (bgp->conf->report_temperature)
+			bgp->conf->report_temperature(bgp, i);
+	}
+	spin_unlock(&bgp->lock);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
+ * @irq: IRQ number
+ * @data: private data (unused)
+ *
+ * This is the Tshut handler. Use it only if bandgap device features
+ * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
+ * the system.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
+{
+	pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n",
+		 __func__);
+
+	orderly_poweroff(true);
+
+	return IRQ_HANDLED;
+}
+
+/***   Helper functions which manipulate conversion ADC <-> mi Celsius   ***/
+
+/**
+ * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
+ * @bgp: struct ti_bandgap pointer
+ * @adc_val: value in ADC representation
+ * @t: address where to write the resulting temperature in mCelsius
+ *
+ * Simple conversion from ADC representation to mCelsius. In case the ADC value
+ * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
+ * The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if conversion was successful, else -ERANGE in case the @adc_val
+ * argument is out of the ADC conv table range.
+ */
+static
+int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
+{
+	const struct ti_bandgap_data *conf = bgp->conf;
+
+	/* look up for temperature in the table and return the temperature */
+	if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
+		return -ERANGE;
+
+	*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
+	return 0;
+}
+
+/**
+ * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
+ * @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
+ *
+ * Checks if the bandgap pointer is valid and if the sensor id is also
+ * applicable.
+ *
+ * Return: 0 if no errors, -EINVAL for invalid @bgp pointer or -ERANGE if
+ * @id cannot index @bgp sensors.
+ */
+static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
+{
+	if (!bgp || IS_ERR(bgp)) {
+		pr_err("%s: invalid bandgap pointer\n", __func__);
+		return -EINVAL;
+	}
+
+	if ((id < 0) || (id >= bgp->conf->sensor_count)) {
+		dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
+			__func__, id);
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_read_counter() - read the sensor counter
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
+ */
+static void ti_bandgap_read_counter(struct ti_bandgap *bgp, int id,
+				    int *interval)
+{
+	struct temp_sensor_registers *tsr;
+	int time;
+
+	tsr = bgp->conf->sensors[id].registers;
+	time = ti_bandgap_readl(bgp, tsr->bgap_counter);
+	time = (time & tsr->counter_mask) >>
+					__ffs(tsr->counter_mask);
+	time = time * 1000 / bgp->clk_rate;
+	*interval = time;
+}
+
+/**
+ * ti_bandgap_read_counter_delay() - read the sensor counter delay
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
+ */
+static void ti_bandgap_read_counter_delay(struct ti_bandgap *bgp, int id,
+					  int *interval)
+{
+	struct temp_sensor_registers *tsr;
+	int reg_val;
+
+	tsr = bgp->conf->sensors[id].registers;
+
+	reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+	reg_val = (reg_val & tsr->mask_counter_delay_mask) >>
+				__ffs(tsr->mask_counter_delay_mask);
+	switch (reg_val) {
+	case 0:
+		*interval = 0;
+		break;
+	case 1:
+		*interval = 1;
+		break;
+	case 2:
+		*interval = 10;
+		break;
+	case 3:
+		*interval = 100;
+		break;
+	case 4:
+		*interval = 250;
+		break;
+	case 5:
+		*interval = 500;
+		break;
+	default:
+		dev_warn(bgp->dev, "Wrong counter delay value read from register %X",
+			 reg_val);
+	}
+}
+
+/**
+ * ti_bandgap_read_update_interval() - read the sensor update interval
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+				    int *interval)
+{
+	int ret = 0;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
+	    !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	if (TI_BANDGAP_HAS(bgp, COUNTER)) {
+		ti_bandgap_read_counter(bgp, id, interval);
+		goto exit;
+	}
+
+	ti_bandgap_read_counter_delay(bgp, id, interval);
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_write_counter_delay() - set the counter_delay
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
+ *
+ * Return: 0 on success or the proper error code
+ */
+static int ti_bandgap_write_counter_delay(struct ti_bandgap *bgp, int id,
+					  u32 interval)
+{
+	int rval;
+
+	switch (interval) {
+	case 0: /* Immediate conversion */
+		rval = 0x0;
+		break;
+	case 1: /* Conversion after ever 1ms */
+		rval = 0x1;
+		break;
+	case 10: /* Conversion after ever 10ms */
+		rval = 0x2;
+		break;
+	case 100: /* Conversion after ever 100ms */
+		rval = 0x3;
+		break;
+	case 250: /* Conversion after ever 250ms */
+		rval = 0x4;
+		break;
+	case 500: /* Conversion after ever 500ms */
+		rval = 0x5;
+		break;
+	default:
+		dev_warn(bgp->dev, "Delay %d ms is not supported\n", interval);
+		return -EINVAL;
+	}
+
+	spin_lock(&bgp->lock);
+	RMW_BITS(bgp, id, bgap_mask_ctrl, mask_counter_delay_mask, rval);
+	spin_unlock(&bgp->lock);
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_write_counter() - set the bandgap sensor counter
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
+ */
+static void ti_bandgap_write_counter(struct ti_bandgap *bgp, int id,
+				     u32 interval)
+{
+	interval = interval * bgp->clk_rate / 1000;
+	spin_lock(&bgp->lock);
+	RMW_BITS(bgp, id, bgap_counter, counter_mask, interval);
+	spin_unlock(&bgp->lock);
+}
+
+/**
+ * ti_bandgap_write_update_interval() - set the update interval
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
+				     int id, u32 interval)
+{
+	int ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
+	    !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	if (TI_BANDGAP_HAS(bgp, COUNTER)) {
+		ti_bandgap_write_counter(bgp, id, interval);
+		goto exit;
+	}
+
+	ret = ti_bandgap_write_counter_delay(bgp, id, interval);
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_read_temperature() - report current temperature
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @temperature: resulting temperature
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
+				int *temperature)
+{
+	u32 temp;
+	int ret;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		return ret;
+
+	if (!TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
+		ret = ti_bandgap_force_single_read(bgp, id);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock(&bgp->lock);
+	temp = ti_bandgap_read_temp(bgp, id);
+	spin_unlock(&bgp->lock);
+
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+	if (ret)
+		return -EIO;
+
+	*temperature = temp;
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_set_sensor_data() - helper function to store thermal
+ * framework related data.
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @data: thermal framework related data to be stored
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
+{
+	int ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		return ret;
+
+	bgp->regval[id].data = data;
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_get_sensor_data() - helper function to get thermal
+ * framework related data.
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ *
+ * Return: data stored by set function with sensor id on success or NULL
+ */
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
+{
+	int ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return bgp->regval[id].data;
+}
+
+/***   Helper functions used during device initialization   ***/
+
+/**
+ * ti_bandgap_force_single_read() - executes 1 single ADC conversion
+ * @bgp: pointer to struct ti_bandgap
+ * @id: sensor id which it is desired to read 1 temperature
+ *
+ * Used to initialize the conversion state machine and set it to a valid
+ * state. Called during device initialization and context restore events.
+ *
+ * Return: 0
+ */
+static int
+ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
+{
+	struct temp_sensor_registers *tsr = bgp->conf->sensors[id].registers;
+	void __iomem *temp_sensor_ctrl = bgp->base + tsr->temp_sensor_ctrl;
+	int error;
+	u32 val;
+
+	/* Select continuous or single conversion mode */
+	if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
+		if (TI_BANDGAP_HAS(bgp, CONT_MODE_ONLY))
+			RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 1);
+		else
+			RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
+	}
+
+	/* Set Start of Conversion if available */
+	if (tsr->bgap_soc_mask) {
+		RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
+
+		/* Wait for EOCZ going up */
+		error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
+						  val & tsr->bgap_eocz_mask,
+						  1, 1000);
+		if (error)
+			dev_warn(bgp->dev, "eocz timed out waiting high\n");
+
+		/* Clear Start of Conversion if available */
+		RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
+	}
+
+	/* Wait for EOCZ going down, always needed even if no bgap_soc_mask */
+	error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
+					  !(val & tsr->bgap_eocz_mask),
+					  1, 1500);
+	if (error)
+		dev_warn(bgp->dev, "eocz timed out waiting low\n");
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
+ * @bgp: pointer to struct ti_bandgap
+ *
+ * Call this function only if HAS(MODE_CONFIG) is set. As this driver may
+ * be used for junction temperature monitoring, it is desirable that the
+ * sensors are operational all the time, so that alerts are generated
+ * properly.
+ *
+ * Return: 0
+ */
+static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
+{
+	int i;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		/* Perform a single read just before enabling continuous */
+		ti_bandgap_force_single_read(bgp, i);
+		RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
+	}
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_get_trend() - To fetch the temperature trend of a sensor
+ * @bgp: pointer to struct ti_bandgap
+ * @id: id of the individual sensor
+ * @trend: Pointer to trend.
+ *
+ * This function needs to be called to fetch the temperature trend of a
+ * Particular sensor. The function computes the difference in temperature
+ * w.r.t time. For the bandgaps with built in history buffer the temperatures
+ * are read from the buffer and for those without the Buffer -ENOTSUPP is
+ * returned.
+ *
+ * Return: 0 if no error, else return corresponding error. If no
+ *		error then the trend value is passed on to trend parameter
+ */
+int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend)
+{
+	struct temp_sensor_registers *tsr;
+	u32 temp1, temp2, reg1, reg2;
+	int t1, t2, interval, ret = 0;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, HISTORY_BUFFER) ||
+	    !TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	spin_lock(&bgp->lock);
+
+	tsr = bgp->conf->sensors[id].registers;
+
+	/* Freeze and read the last 2 valid readings */
+	RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
+	reg1 = tsr->ctrl_dtemp_1;
+	reg2 = tsr->ctrl_dtemp_2;
+
+	/* read temperature from history buffer */
+	temp1 = ti_bandgap_readl(bgp, reg1);
+	temp1 &= tsr->bgap_dtemp_mask;
+
+	temp2 = ti_bandgap_readl(bgp, reg2);
+	temp2 &= tsr->bgap_dtemp_mask;
+
+	/* Convert from adc values to mCelsius temperature */
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1);
+	if (ret)
+		goto unfreeze;
+
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2);
+	if (ret)
+		goto unfreeze;
+
+	/* Fetch the update interval */
+	ret = ti_bandgap_read_update_interval(bgp, id, &interval);
+	if (ret)
+		goto unfreeze;
+
+	/* Set the interval to 1 ms if bandgap counter delay is not set */
+	if (interval == 0)
+		interval = 1;
+
+	*trend = (t1 - t2) / interval;
+
+	dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
+		t1, t2, *trend);
+
+unfreeze:
+	RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
+	spin_unlock(&bgp->lock);
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_tshut_init() - setup and initialize tshut handling
+ * @bgp: pointer to struct ti_bandgap
+ * @pdev: pointer to device struct platform_device
+ *
+ * Call this function only in case the bandgap features HAS(TSHUT).
+ * In this case, the driver needs to handle the TSHUT signal as an IRQ.
+ * The IRQ is wired as a GPIO, and for this purpose, it is required
+ * to specify which GPIO line is used. TSHUT IRQ is fired anytime
+ * one of the bandgap sensors violates the TSHUT high/hot threshold.
+ * And in that case, the system must go off.
+ *
+ * Return: 0 if no error, else error status
+ */
+static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
+				 struct platform_device *pdev)
+{
+	int status;
+
+	status = request_irq(gpiod_to_irq(bgp->tshut_gpiod),
+			     ti_bandgap_tshut_irq_handler,
+			     IRQF_TRIGGER_RISING, "tshut", NULL);
+	if (status)
+		dev_err(bgp->dev, "request irq failed for TSHUT");
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_talert_init() - setup and initialize talert handling
+ * @bgp: pointer to struct ti_bandgap
+ * @pdev: pointer to device struct platform_device
+ *
+ * Call this function only in case the bandgap features HAS(TALERT).
+ * In this case, the driver needs to handle the TALERT signals as an IRQs.
+ * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
+ * are violated. In these situation, the driver must reprogram the thresholds,
+ * accordingly to specified policy.
+ *
+ * Return: 0 if no error, else return corresponding error.
+ */
+static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
+				  struct platform_device *pdev)
+{
+	int ret;
+
+	bgp->irq = platform_get_irq(pdev, 0);
+	if (bgp->irq < 0)
+		return bgp->irq;
+
+	ret = request_threaded_irq(bgp->irq, NULL,
+				   ti_bandgap_talert_irq_handler,
+				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   "talert", bgp);
+	if (ret) {
+		dev_err(&pdev->dev, "Request threaded irq failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_ti_bandgap_match[];
+/**
+ * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
+ * @pdev: pointer to device struct platform_device
+ *
+ * Used to read the device tree properties accordingly to the bandgap
+ * matching version. Based on bandgap version and its capabilities it
+ * will build a struct ti_bandgap out of the required DT entries.
+ *
+ * Return: valid bandgap structure if successful, else returns ERR_PTR
+ * return value must be verified with IS_ERR.
+ */
+static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	struct ti_bandgap *bgp;
+	struct resource *res;
+	int i;
+
+	/* just for the sake */
+	if (!node) {
+		dev_err(&pdev->dev, "no platform information available\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp)
+		return ERR_PTR(-ENOMEM);
+
+	of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
+	if (of_id)
+		bgp->conf = of_id->data;
+
+	/* register shadow for context save and restore */
+	bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
+				   sizeof(*bgp->regval), GFP_KERNEL);
+	if (!bgp->regval)
+		return ERR_PTR(-ENOMEM);
+
+	i = 0;
+	do {
+		void __iomem *chunk;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+		chunk = devm_ioremap_resource(&pdev->dev, res);
+		if (i == 0)
+			bgp->base = chunk;
+		if (IS_ERR(chunk))
+			return ERR_CAST(chunk);
+
+		i++;
+	} while (res);
+
+	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+		bgp->tshut_gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
+		if (IS_ERR(bgp->tshut_gpiod)) {
+			dev_err(&pdev->dev, "invalid gpio for tshut\n");
+			return ERR_CAST(bgp->tshut_gpiod);
+		}
+	}
+
+	return bgp;
+}
+
+/*
+ * List of SoCs on which the CPU PM notifier can cause erros on the DTEMP
+ * readout.
+ * Enabled notifier on these machines results in erroneous, random values which
+ * could trigger unexpected thermal shutdown.
+ */
+static const struct soc_device_attribute soc_no_cpu_notifier[] = {
+	{ .machine = "OMAP4430" },
+	{ /* sentinel */ },
+};
+
+/***   Device driver call backs   ***/
+
+static
+int ti_bandgap_probe(struct platform_device *pdev)
+{
+	struct ti_bandgap *bgp;
+	int clk_rate, ret, i;
+
+	bgp = ti_bandgap_build(pdev);
+	if (IS_ERR(bgp)) {
+		dev_err(&pdev->dev, "failed to fetch platform data\n");
+		return PTR_ERR(bgp);
+	}
+	bgp->dev = &pdev->dev;
+
+	if (TI_BANDGAP_HAS(bgp, UNRELIABLE))
+		dev_warn(&pdev->dev,
+			 "This OMAP thermal sensor is unreliable. You've been warned\n");
+
+	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+		ret = ti_bandgap_tshut_init(bgp, pdev);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to initialize system tshut IRQ\n");
+			return ret;
+		}
+	}
+
+	bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
+	if (IS_ERR(bgp->fclock)) {
+		dev_err(&pdev->dev, "failed to request fclock reference\n");
+		ret = PTR_ERR(bgp->fclock);
+		goto free_irqs;
+	}
+
+	bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
+	if (IS_ERR(bgp->div_clk)) {
+		dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
+		ret = PTR_ERR(bgp->div_clk);
+		goto put_fclock;
+	}
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_registers *tsr;
+		u32 val;
+
+		tsr = bgp->conf->sensors[i].registers;
+		/*
+		 * check if the efuse has a non-zero value if not
+		 * it is an untrimmed sample and the temperatures
+		 * may not be accurate
+		 */
+		val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
+		if (!val)
+			dev_info(&pdev->dev,
+				 "Non-trimmed BGAP, Temp not accurate\n");
+	}
+
+	clk_rate = clk_round_rate(bgp->div_clk,
+				  bgp->conf->sensors[0].ts_data->max_freq);
+	if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
+	    clk_rate <= 0) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
+		goto put_clks;
+	}
+
+	ret = clk_set_rate(bgp->div_clk, clk_rate);
+	if (ret)
+		dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
+
+	bgp->clk_rate = clk_rate;
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_prepare_enable(bgp->fclock);
+
+
+	spin_lock_init(&bgp->lock);
+	bgp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, bgp);
+
+	ti_bandgap_power(bgp, true);
+
+	/* Set default counter to 1 for now */
+	if (TI_BANDGAP_HAS(bgp, COUNTER))
+		for (i = 0; i < bgp->conf->sensor_count; i++)
+			RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
+
+	/* Set default thresholds for alert and shutdown */
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_data *ts_data;
+
+		ts_data = bgp->conf->sensors[i].ts_data;
+
+		if (TI_BANDGAP_HAS(bgp, TALERT)) {
+			/* Set initial Talert thresholds */
+			RMW_BITS(bgp, i, bgap_threshold,
+				 threshold_tcold_mask, ts_data->t_cold);
+			RMW_BITS(bgp, i, bgap_threshold,
+				 threshold_thot_mask, ts_data->t_hot);
+			/* Enable the alert events */
+			RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1);
+			RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
+		}
+
+		if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
+			/* Set initial Tshut thresholds */
+			RMW_BITS(bgp, i, tshut_threshold,
+				 tshut_hot_mask, ts_data->tshut_hot);
+			RMW_BITS(bgp, i, tshut_threshold,
+				 tshut_cold_mask, ts_data->tshut_cold);
+		}
+	}
+
+	if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+		ti_bandgap_set_continuous_mode(bgp);
+
+	/* Set .250 seconds time as default counter */
+	if (TI_BANDGAP_HAS(bgp, COUNTER))
+		for (i = 0; i < bgp->conf->sensor_count; i++)
+			RMW_BITS(bgp, i, bgap_counter, counter_mask,
+				 bgp->clk_rate / 4);
+
+	/* Every thing is good? Then expose the sensors */
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		char *domain;
+
+		if (bgp->conf->sensors[i].register_cooling) {
+			ret = bgp->conf->sensors[i].register_cooling(bgp, i);
+			if (ret)
+				goto remove_sensors;
+		}
+
+		if (bgp->conf->expose_sensor) {
+			domain = bgp->conf->sensors[i].domain;
+			ret = bgp->conf->expose_sensor(bgp, i, domain);
+			if (ret)
+				goto remove_last_cooling;
+		}
+	}
+
+	/*
+	 * Enable the Interrupts once everything is set. Otherwise irq handler
+	 * might be called as soon as it is enabled where as rest of framework
+	 * is still getting initialised.
+	 */
+	if (TI_BANDGAP_HAS(bgp, TALERT)) {
+		ret = ti_bandgap_talert_init(bgp, pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
+			i = bgp->conf->sensor_count;
+			goto disable_clk;
+		}
+	}
+
+#ifdef CONFIG_PM_SLEEP
+	bgp->nb.notifier_call = bandgap_omap_cpu_notifier;
+	if (!soc_device_match(soc_no_cpu_notifier))
+		cpu_pm_register_notifier(&bgp->nb);
+#endif
+
+	return 0;
+
+remove_last_cooling:
+	if (bgp->conf->sensors[i].unregister_cooling)
+		bgp->conf->sensors[i].unregister_cooling(bgp, i);
+remove_sensors:
+	for (i--; i >= 0; i--) {
+		if (bgp->conf->sensors[i].unregister_cooling)
+			bgp->conf->sensors[i].unregister_cooling(bgp, i);
+		if (bgp->conf->remove_sensor)
+			bgp->conf->remove_sensor(bgp, i);
+	}
+	ti_bandgap_power(bgp, false);
+disable_clk:
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_disable_unprepare(bgp->fclock);
+put_clks:
+	clk_put(bgp->div_clk);
+put_fclock:
+	clk_put(bgp->fclock);
+free_irqs:
+	if (TI_BANDGAP_HAS(bgp, TSHUT))
+		free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
+
+	return ret;
+}
+
+static
+int ti_bandgap_remove(struct platform_device *pdev)
+{
+	struct ti_bandgap *bgp = platform_get_drvdata(pdev);
+	int i;
+
+	if (!soc_device_match(soc_no_cpu_notifier))
+		cpu_pm_unregister_notifier(&bgp->nb);
+
+	/* Remove sensor interfaces */
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		if (bgp->conf->sensors[i].unregister_cooling)
+			bgp->conf->sensors[i].unregister_cooling(bgp, i);
+
+		if (bgp->conf->remove_sensor)
+			bgp->conf->remove_sensor(bgp, i);
+	}
+
+	ti_bandgap_power(bgp, false);
+
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_disable_unprepare(bgp->fclock);
+	clk_put(bgp->fclock);
+	clk_put(bgp->div_clk);
+
+	if (TI_BANDGAP_HAS(bgp, TALERT))
+		free_irq(bgp->irq, bgp);
+
+	if (TI_BANDGAP_HAS(bgp, TSHUT))
+		free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
+{
+	int i;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_registers *tsr;
+		struct temp_sensor_regval *rval;
+
+		rval = &bgp->regval[i];
+		tsr = bgp->conf->sensors[i].registers;
+
+		if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+			rval->bg_mode_ctrl = ti_bandgap_readl(bgp,
+							tsr->bgap_mode_ctrl);
+		if (TI_BANDGAP_HAS(bgp, COUNTER))
+			rval->bg_counter = ti_bandgap_readl(bgp,
+							tsr->bgap_counter);
+		if (TI_BANDGAP_HAS(bgp, TALERT)) {
+			rval->bg_threshold = ti_bandgap_readl(bgp,
+							tsr->bgap_threshold);
+			rval->bg_ctrl = ti_bandgap_readl(bgp,
+						   tsr->bgap_mask_ctrl);
+		}
+
+		if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+			rval->tshut_threshold = ti_bandgap_readl(bgp,
+						   tsr->tshut_threshold);
+	}
+
+	return 0;
+}
+
+static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
+{
+	int i;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_registers *tsr;
+		struct temp_sensor_regval *rval;
+
+		rval = &bgp->regval[i];
+		tsr = bgp->conf->sensors[i].registers;
+
+		if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+			ti_bandgap_writel(bgp, rval->tshut_threshold,
+					  tsr->tshut_threshold);
+		/* Force immediate temperature measurement and update
+		 * of the DTEMP field
+		 */
+		ti_bandgap_force_single_read(bgp, i);
+
+		if (TI_BANDGAP_HAS(bgp, COUNTER))
+			ti_bandgap_writel(bgp, rval->bg_counter,
+					  tsr->bgap_counter);
+		if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+			ti_bandgap_writel(bgp, rval->bg_mode_ctrl,
+					  tsr->bgap_mode_ctrl);
+		if (TI_BANDGAP_HAS(bgp, TALERT)) {
+			ti_bandgap_writel(bgp, rval->bg_threshold,
+					  tsr->bgap_threshold);
+			ti_bandgap_writel(bgp, rval->bg_ctrl,
+					  tsr->bgap_mask_ctrl);
+		}
+	}
+
+	return 0;
+}
+
+static int ti_bandgap_suspend(struct device *dev)
+{
+	struct ti_bandgap *bgp = dev_get_drvdata(dev);
+	int err;
+
+	err = ti_bandgap_save_ctxt(bgp);
+	ti_bandgap_power(bgp, false);
+
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_disable_unprepare(bgp->fclock);
+
+	bgp->is_suspended = true;
+
+	return err;
+}
+
+static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
+				  unsigned long cmd, void *v)
+{
+	struct ti_bandgap *bgp;
+
+	bgp = container_of(nb, struct ti_bandgap, nb);
+
+	spin_lock(&bgp->lock);
+	switch (cmd) {
+	case CPU_CLUSTER_PM_ENTER:
+		if (bgp->is_suspended)
+			break;
+		ti_bandgap_save_ctxt(bgp);
+		ti_bandgap_power(bgp, false);
+		if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+			clk_disable(bgp->fclock);
+		break;
+	case CPU_CLUSTER_PM_ENTER_FAILED:
+	case CPU_CLUSTER_PM_EXIT:
+		if (bgp->is_suspended)
+			break;
+		if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+			clk_enable(bgp->fclock);
+		ti_bandgap_power(bgp, true);
+		ti_bandgap_restore_ctxt(bgp);
+		break;
+	}
+	spin_unlock(&bgp->lock);
+
+	return NOTIFY_OK;
+}
+
+static int ti_bandgap_resume(struct device *dev)
+{
+	struct ti_bandgap *bgp = dev_get_drvdata(dev);
+
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_prepare_enable(bgp->fclock);
+
+	ti_bandgap_power(bgp, true);
+	bgp->is_suspended = false;
+
+	return ti_bandgap_restore_ctxt(bgp);
+}
+static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
+			 ti_bandgap_resume);
+
+#define DEV_PM_OPS	(&ti_bandgap_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static const struct of_device_id of_ti_bandgap_match[] = {
+#ifdef CONFIG_OMAP3_THERMAL
+	{
+		.compatible = "ti,omap34xx-bandgap",
+		.data = (void *)&omap34xx_data,
+	},
+	{
+		.compatible = "ti,omap36xx-bandgap",
+		.data = (void *)&omap36xx_data,
+	},
+#endif
+#ifdef CONFIG_OMAP4_THERMAL
+	{
+		.compatible = "ti,omap4430-bandgap",
+		.data = (void *)&omap4430_data,
+	},
+	{
+		.compatible = "ti,omap4460-bandgap",
+		.data = (void *)&omap4460_data,
+	},
+	{
+		.compatible = "ti,omap4470-bandgap",
+		.data = (void *)&omap4470_data,
+	},
+#endif
+#ifdef CONFIG_OMAP5_THERMAL
+	{
+		.compatible = "ti,omap5430-bandgap",
+		.data = (void *)&omap5430_data,
+	},
+#endif
+#ifdef CONFIG_DRA752_THERMAL
+	{
+		.compatible = "ti,dra752-bandgap",
+		.data = (void *)&dra752_data,
+	},
+#endif
+	/* Sentinel */
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);
+
+static struct platform_driver ti_bandgap_sensor_driver = {
+	.probe = ti_bandgap_probe,
+	.remove = ti_bandgap_remove,
+	.driver = {
+			.name = "ti-soc-thermal",
+			.pm = DEV_PM_OPS,
+			.of_match_table	= of_ti_bandgap_match,
+	},
+};
+
+module_platform_driver(ti_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ti-soc-thermal");
+MODULE_AUTHOR("Texas Instrument Inc.");
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
new file mode 100644
index 000000000..1f4bbaf31
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OMAP4 Bandgap temperature sensor driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#ifndef __TI_BANDGAP_H
+#define __TI_BANDGAP_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/cpu_pm.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
+
+struct gpio_desc;
+
+/**
+ * DOC: bandgap driver data structure
+ * ==================================
+ *
+ *   +----------+----------------+
+ *   | struct temp_sensor_regval |
+ *   +---------------------------+
+ *              * (Array of)
+ *              |
+ *              |
+ *   +-------------------+   +-----------------+
+ *   | struct ti_bandgap |-->| struct device * |
+ *   +----------+--------+   +-----------------+
+ *              |
+ *              |
+ *              V
+ *   +------------------------+
+ *   | struct ti_bandgap_data |
+ *   +------------------------+
+ *              |
+ *              |
+ *              * (Array of)
+ * +------------+------------------------------------------------------+
+ * | +----------+------------+   +-------------------------+           |
+ * | | struct ti_temp_sensor |-->| struct temp_sensor_data |           |
+ * | +-----------------------+   +------------+------------+           |
+ * |            |                                                      |
+ * |            +                                                      |
+ * |            V                                                      |
+ * | +----------+-------------------+                                  |
+ * | | struct temp_sensor_registers |                                  |
+ * | +------------------------------+                                  |
+ * |                                                                   |
+ * +-------------------------------------------------------------------+
+ *
+ * Above is a simple diagram describing how the data structure below
+ * are organized. For each bandgap device there should be a ti_bandgap_data
+ * containing the device instance configuration, as well as, an array of
+ * sensors, representing every sensor instance present in this bandgap.
+ */
+
+/**
+ * struct temp_sensor_registers - descriptor to access registers and bitfields
+ * @temp_sensor_ctrl: TEMP_SENSOR_CTRL register offset
+ * @bgap_tempsoff_mask: mask to temp_sensor_ctrl.tempsoff
+ * @bgap_soc_mask: mask to temp_sensor_ctrl.soc
+ * @bgap_eocz_mask: mask to temp_sensor_ctrl.eocz
+ * @bgap_dtemp_mask: mask to temp_sensor_ctrl.dtemp
+ * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset
+ * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot
+ * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold
+ * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay
+ * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free
+ * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset
+ * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl
+ * @bgap_counter: BANDGAP_COUNTER register offset
+ * @counter_mask: mask to bandgap_counter.counter
+ * @bgap_threshold: BANDGAP_THRESHOLD register offset (TALERT thresholds)
+ * @threshold_thot_mask: mask to bandgap_threhold.thot
+ * @threshold_tcold_mask: mask to bandgap_threhold.tcold
+ * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds)
+ * @tshut_hot_mask: mask to tshut_threhold.thot
+ * @tshut_cold_mask: mask to tshut_threhold.thot
+ * @bgap_status: BANDGAP_STATUS register offset
+ * @status_hot_mask: mask to bandgap_status.hot
+ * @status_cold_mask: mask to bandgap_status.cold
+ * @ctrl_dtemp_1: CTRL_DTEMP1 register offset
+ * @ctrl_dtemp_2: CTRL_DTEMP2 register offset
+ * @bgap_efuse: BANDGAP_EFUSE register offset
+ *
+ * The register offsets and bitfields might change across
+ * OMAP and variants versions. Hence this struct serves as a
+ * descriptor map on how to access the registers and the bitfields.
+ *
+ * This descriptor contains registers of all versions of bandgap chips.
+ * Not all versions will use all registers, depending on the available
+ * features. Please read TRMs for descriptive explanation on each bitfield.
+ */
+
+struct temp_sensor_registers {
+	u32	temp_sensor_ctrl;
+	u32	bgap_tempsoff_mask;
+	u32	bgap_soc_mask;
+	u32	bgap_eocz_mask;
+	u32	bgap_dtemp_mask;
+
+	u32	bgap_mask_ctrl;
+	u32	mask_hot_mask;
+	u32	mask_cold_mask;
+	u32	mask_counter_delay_mask;
+	u32	mask_freeze_mask;
+
+	u32	bgap_mode_ctrl;
+	u32	mode_ctrl_mask;
+
+	u32	bgap_counter;
+	u32	counter_mask;
+
+	u32	bgap_threshold;
+	u32	threshold_thot_mask;
+	u32	threshold_tcold_mask;
+
+	u32	tshut_threshold;
+	u32	tshut_hot_mask;
+	u32	tshut_cold_mask;
+
+	u32	bgap_status;
+	u32	status_hot_mask;
+	u32	status_cold_mask;
+
+	u32	ctrl_dtemp_1;
+	u32	ctrl_dtemp_2;
+	u32	bgap_efuse;
+};
+
+/**
+ * struct temp_sensor_data - The thresholds and limits for temperature sensors.
+ * @tshut_hot: temperature to trigger a thermal reset (initial value)
+ * @tshut_cold: temp to get the plat out of reset due to thermal (init val)
+ * @t_hot: temperature to trigger a thermal alert (high initial value)
+ * @t_cold: temperature to trigger a thermal alert (low initial value)
+ * @min_freq: sensor minimum clock rate
+ * @max_freq: sensor maximum clock rate
+ *
+ * This data structure will hold the required thresholds and temperature limits
+ * for a specific temperature sensor, like shutdown temperature, alert
+ * temperature, clock / rate used, ADC conversion limits and update intervals
+ */
+struct temp_sensor_data {
+	u32	tshut_hot;
+	u32	tshut_cold;
+	u32	t_hot;
+	u32	t_cold;
+	u32	min_freq;
+	u32	max_freq;
+};
+
+struct ti_bandgap_data;
+
+/**
+ * struct temp_sensor_regval - temperature sensor register values and priv data
+ * @bg_mode_ctrl: temp sensor control register value
+ * @bg_ctrl: bandgap ctrl register value
+ * @bg_counter: bandgap counter value
+ * @bg_threshold: bandgap threshold register value
+ * @tshut_threshold: bandgap tshut register value
+ * @data: private data
+ *
+ * Data structure to save and restore bandgap register set context. Only
+ * required registers are shadowed, when needed.
+ */
+struct temp_sensor_regval {
+	u32			bg_mode_ctrl;
+	u32			bg_ctrl;
+	u32			bg_counter;
+	u32			bg_threshold;
+	u32			tshut_threshold;
+	void			*data;
+};
+
+/**
+ * struct ti_bandgap - bandgap device structure
+ * @dev: struct device pointer
+ * @base: io memory base address
+ * @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
+ * @regval: temperature sensor register values
+ * @fclock: pointer to functional clock of temperature sensor
+ * @div_clk: pointer to divider clock of temperature sensor fclk
+ * @lock: spinlock for ti_bandgap structure
+ * @irq: MPU IRQ number for thermal alert
+ * @tshut_gpio: GPIO where Tshut signal is routed
+ * @clk_rate: Holds current clock rate
+ *
+ * The bandgap device structure representing the bandgap device instance.
+ * It holds most of the dynamic stuff. Configurations and sensor specific
+ * entries are inside the @conf structure.
+ */
+struct ti_bandgap {
+	struct device			*dev;
+	void __iomem			*base;
+	const struct ti_bandgap_data	*conf;
+	struct temp_sensor_regval	*regval;
+	struct clk			*fclock;
+	struct clk			*div_clk;
+	spinlock_t			lock; /* shields this struct */
+	int				irq;
+	struct gpio_desc		*tshut_gpiod;
+	u32				clk_rate;
+	struct notifier_block		nb;
+	unsigned int is_suspended:1;
+};
+
+/**
+ * struct ti_temp_sensor - bandgap temperature sensor configuration data
+ * @ts_data: pointer to struct with thresholds, limits of temperature sensor
+ * @registers: pointer to the list of register offsets and bitfields
+ * @domain: the name of the domain where the sensor is located
+ * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
+ *             with no external influence
+ * @constant_pcb: sensor gradient const info for hotspot extrapolation equation
+ *             with no external influence
+ * @register_cooling: function to describe how this sensor is going to be cooled
+ * @unregister_cooling: function to release cooling data
+ *
+ * Data structure to describe a temperature sensor handled by a bandgap device.
+ * It should provide configuration details on this sensor, such as how to
+ * access the registers affecting this sensor, shadow register buffer, how to
+ * assess the gradient from hotspot, how to cooldown the domain when sensor
+ * reports too hot temperature.
+ */
+struct ti_temp_sensor {
+	struct temp_sensor_data		*ts_data;
+	struct temp_sensor_registers	*registers;
+	char				*domain;
+	/* for hotspot extrapolation */
+	const int			slope_pcb;
+	const int			constant_pcb;
+	int (*register_cooling)(struct ti_bandgap *bgp, int id);
+	int (*unregister_cooling)(struct ti_bandgap *bgp, int id);
+};
+
+/**
+ * DOC: ti bandgap feature types
+ *
+ * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
+ *      of a bandgap device instance is routed to the processor. This means
+ *      the system must react and perform the shutdown by itself (handle an
+ *      IRQ, for instance).
+ *
+ * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
+ *      over the thermal shutdown configuration. This means that the thermal
+ *      shutdown thresholds are programmable, for instance.
+ *
+ * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
+ *      a signal representing violation of programmable alert thresholds.
+ *
+ * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
+ *      mode, continuous or one shot, the bandgap device instance will operate.
+ *
+ * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
+ *      programming the update interval of its internal state machine.
+ *
+ * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
+ *      itself to be switched on/off.
+ *
+ * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
+ *      device are gateable or not.
+ *
+ * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
+ *      a history buffer that its update can be freezed/unfreezed.
+ *
+ * TI_BANDGAP_FEATURE_COUNTER_DELAY - used when the bandgap device features
+ *	a delay programming based on distinct values.
+ *
+ * TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features
+ *	a history buffer of temperatures.
+ *
+ * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device
+ *	has Errata 814
+ * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
+ *	inaccurate.
+ * TI_BANDGAP_FEATURE_CONT_MODE_ONLY - used when single mode hangs the sensor
+ * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
+ *      specific feature (above) or not. Return non-zero, if yes.
+ */
+#define TI_BANDGAP_FEATURE_TSHUT		BIT(0)
+#define TI_BANDGAP_FEATURE_TSHUT_CONFIG		BIT(1)
+#define TI_BANDGAP_FEATURE_TALERT		BIT(2)
+#define TI_BANDGAP_FEATURE_MODE_CONFIG		BIT(3)
+#define TI_BANDGAP_FEATURE_COUNTER		BIT(4)
+#define TI_BANDGAP_FEATURE_POWER_SWITCH		BIT(5)
+#define TI_BANDGAP_FEATURE_CLK_CTRL		BIT(6)
+#define TI_BANDGAP_FEATURE_FREEZE_BIT		BIT(7)
+#define TI_BANDGAP_FEATURE_COUNTER_DELAY	BIT(8)
+#define TI_BANDGAP_FEATURE_HISTORY_BUFFER	BIT(9)
+#define TI_BANDGAP_FEATURE_ERRATA_814		BIT(10)
+#define TI_BANDGAP_FEATURE_UNRELIABLE		BIT(11)
+#define TI_BANDGAP_FEATURE_CONT_MODE_ONLY	BIT(12)
+#define TI_BANDGAP_HAS(b, f)			\
+			((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
+
+/**
+ * struct ti_bandgap_data - ti bandgap data configuration structure
+ * @features: a bitwise flag set to describe the device features
+ * @conv_table: Pointer to ADC to temperature conversion table
+ * @adc_start_val: ADC conversion table starting value
+ * @adc_end_val: ADC conversion table ending value
+ * @fclock_name: clock name of the functional clock
+ * @div_ck_name: clock name of the clock divisor
+ * @sensor_count: count of temperature sensor within this bandgap device
+ * @report_temperature: callback to report thermal alert to thermal API
+ * @expose_sensor: callback to export sensor to thermal API
+ * @remove_sensor: callback to destroy sensor from thermal API
+ * @sensors: array of sensors present in this bandgap instance
+ *
+ * This is a data structure which should hold most of the static configuration
+ * of a bandgap device instance. It should describe which features this instance
+ * is capable of, the clock names to feed this device, the amount of sensors and
+ * their configuration representation, and how to export and unexport them to
+ * a thermal API.
+ */
+struct ti_bandgap_data {
+	unsigned int			features;
+	const int			*conv_table;
+	u32				adc_start_val;
+	u32				adc_end_val;
+	char				*fclock_name;
+	char				*div_ck_name;
+	int				sensor_count;
+	int (*report_temperature)(struct ti_bandgap *bgp, int id);
+	int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain);
+	int (*remove_sensor)(struct ti_bandgap *bgp, int id);
+
+	/* this needs to be at the end */
+	struct ti_temp_sensor		sensors[];
+};
+
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot);
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold);
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+				    int *interval);
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id,
+				     u32 interval);
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
+				  int *temperature);
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
+int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend);
+
+#ifdef CONFIG_OMAP3_THERMAL
+extern const struct ti_bandgap_data omap34xx_data;
+extern const struct ti_bandgap_data omap36xx_data;
+#else
+#define omap34xx_data					NULL
+#define omap36xx_data					NULL
+#endif
+
+#ifdef CONFIG_OMAP4_THERMAL
+extern const struct ti_bandgap_data omap4430_data;
+extern const struct ti_bandgap_data omap4460_data;
+extern const struct ti_bandgap_data omap4470_data;
+#else
+#define omap4430_data					NULL
+#define omap4460_data					NULL
+#define omap4470_data					NULL
+#endif
+
+#ifdef CONFIG_OMAP5_THERMAL
+extern const struct ti_bandgap_data omap5430_data;
+#else
+#define omap5430_data					NULL
+#endif
+
+#ifdef CONFIG_DRA752_THERMAL
+extern const struct ti_bandgap_data dra752_data;
+#else
+#define dra752_data					NULL
+#endif
+#endif
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
new file mode 100644
index 000000000..8a9055bd3
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP thermal driver interface
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/workqueue.h>
+#include <linux/thermal.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
+#include <linux/of.h>
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+#include "../thermal_hwmon.h"
+
+/* common data structures */
+struct ti_thermal_data {
+	struct cpufreq_policy *policy;
+	struct thermal_zone_device *ti_thermal;
+	struct thermal_zone_device *pcb_tz;
+	struct thermal_cooling_device *cool_dev;
+	struct ti_bandgap *bgp;
+	enum thermal_device_mode mode;
+	struct work_struct thermal_wq;
+	int sensor_id;
+	bool our_zone;
+};
+
+static void ti_thermal_work(struct work_struct *work)
+{
+	struct ti_thermal_data *data = container_of(work,
+					struct ti_thermal_data, thermal_wq);
+
+	thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
+
+	dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
+		data->ti_thermal->type);
+}
+
+/**
+ * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature
+ * @t:	omap sensor temperature
+ * @s:	omap sensor slope value
+ * @c:	omap sensor const value
+ */
+static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
+{
+	int delta = t * s / 1000 + c;
+
+	if (delta < 0)
+		delta = 0;
+
+	return t + delta;
+}
+
+/* thermal zone ops */
+/* Get temperature callback function for thermal zone */
+static inline int __ti_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct thermal_zone_device *pcb_tz = NULL;
+	struct ti_thermal_data *data = tz->devdata;
+	struct ti_bandgap *bgp;
+	const struct ti_temp_sensor *s;
+	int ret, tmp, slope, constant;
+	int pcb_temp;
+
+	if (!data)
+		return 0;
+
+	bgp = data->bgp;
+	s = &bgp->conf->sensors[data->sensor_id];
+
+	ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
+	if (ret)
+		return ret;
+
+	/* Default constants */
+	slope = thermal_zone_get_slope(tz);
+	constant = thermal_zone_get_offset(tz);
+
+	pcb_tz = data->pcb_tz;
+	/* In case pcb zone is available, use the extrapolation rule with it */
+	if (!IS_ERR(pcb_tz)) {
+		ret = thermal_zone_get_temp(pcb_tz, &pcb_temp);
+		if (!ret) {
+			tmp -= pcb_temp; /* got a valid PCB temp */
+			slope = s->slope_pcb;
+			constant = s->constant_pcb;
+		} else {
+			dev_err(bgp->dev,
+				"Failed to read PCB state. Using defaults\n");
+			ret = 0;
+		}
+	}
+	*temp = ti_thermal_hotspot_temperature(tmp, slope, constant);
+
+	return ret;
+}
+
+static int __ti_thermal_get_trend(struct thermal_zone_device *tz, int trip, enum thermal_trend *trend)
+{
+	struct ti_thermal_data *data = tz->devdata;
+	struct ti_bandgap *bgp;
+	int id, tr, ret = 0;
+
+	bgp = data->bgp;
+	id = data->sensor_id;
+
+	ret = ti_bandgap_get_trend(bgp, id, &tr);
+	if (ret)
+		return ret;
+
+	if (tr > 0)
+		*trend = THERMAL_TREND_RAISING;
+	else if (tr < 0)
+		*trend = THERMAL_TREND_DROPPING;
+	else
+		*trend = THERMAL_TREND_STABLE;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops ti_of_thermal_ops = {
+	.get_temp = __ti_thermal_get_temp,
+	.get_trend = __ti_thermal_get_trend,
+};
+
+static struct ti_thermal_data
+*ti_thermal_build_data(struct ti_bandgap *bgp, int id)
+{
+	struct ti_thermal_data *data;
+
+	data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(bgp->dev, "kzalloc fail\n");
+		return NULL;
+	}
+	data->sensor_id = id;
+	data->bgp = bgp;
+	data->mode = THERMAL_DEVICE_ENABLED;
+	/* pcb_tz will be either valid or PTR_ERR() */
+	data->pcb_tz = thermal_zone_get_zone_by_name("pcb");
+	INIT_WORK(&data->thermal_wq, ti_thermal_work);
+
+	return data;
+}
+
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
+			     char *domain)
+{
+	struct ti_thermal_data *data;
+	int interval;
+
+	data = ti_bandgap_get_sensor_data(bgp, id);
+
+	if (IS_ERR_OR_NULL(data))
+		data = ti_thermal_build_data(bgp, id);
+
+	if (!data)
+		return -EINVAL;
+
+	/* in case this is specified by DT */
+	data->ti_thermal = devm_thermal_of_zone_register(bgp->dev, id,
+					data, &ti_of_thermal_ops);
+	if (IS_ERR(data->ti_thermal)) {
+		dev_err(bgp->dev, "thermal zone device is NULL\n");
+		return PTR_ERR(data->ti_thermal);
+	}
+
+	interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
+
+	ti_bandgap_set_sensor_data(bgp, id, data);
+	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
+
+	if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
+		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
+
+	return 0;
+}
+
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
+{
+	struct ti_thermal_data *data;
+
+	data = ti_bandgap_get_sensor_data(bgp, id);
+
+	if (!IS_ERR_OR_NULL(data) && data->ti_thermal) {
+		if (data->our_zone)
+			thermal_zone_device_unregister(data->ti_thermal);
+	}
+
+	return 0;
+}
+
+int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
+{
+	struct ti_thermal_data *data;
+
+	data = ti_bandgap_get_sensor_data(bgp, id);
+
+	schedule_work(&data->thermal_wq);
+
+	return 0;
+}
+
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
+{
+	struct ti_thermal_data *data;
+	struct device_node *np = bgp->dev->of_node;
+
+	/*
+	 * We are assuming here that if one deploys the zone
+	 * using DT, then it must be aware that the cooling device
+	 * loading has to happen via cpufreq driver.
+	 */
+	if (of_find_property(np, "#thermal-sensor-cells", NULL))
+		return 0;
+
+	data = ti_bandgap_get_sensor_data(bgp, id);
+	if (!data || IS_ERR(data))
+		data = ti_thermal_build_data(bgp, id);
+
+	if (!data)
+		return -EINVAL;
+
+	data->policy = cpufreq_cpu_get(0);
+	if (!data->policy) {
+		pr_debug("%s: CPUFreq policy not found\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	/* Register cooling device */
+	data->cool_dev = cpufreq_cooling_register(data->policy);
+	if (IS_ERR(data->cool_dev)) {
+		int ret = PTR_ERR(data->cool_dev);
+		dev_err(bgp->dev, "Failed to register cpu cooling device %d\n",
+			ret);
+		cpufreq_cpu_put(data->policy);
+
+		return ret;
+	}
+	ti_bandgap_set_sensor_data(bgp, id, data);
+
+	return 0;
+}
+
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
+{
+	struct ti_thermal_data *data;
+
+	data = ti_bandgap_get_sensor_data(bgp, id);
+
+	if (!IS_ERR_OR_NULL(data)) {
+		cpufreq_cooling_unregister(data->cool_dev);
+		if (data->policy)
+			cpufreq_cpu_put(data->policy);
+	}
+
+	return 0;
+}
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h
new file mode 100644
index 000000000..c388ecf31
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OMAP thermal definitions
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#ifndef __TI_THERMAL_H
+#define __TI_THERMAL_H
+
+#include "ti-bandgap.h"
+
+/* PCB sensor calculation constants */
+#define OMAP_GRADIENT_SLOPE_W_PCB_4430				0
+#define OMAP_GRADIENT_CONST_W_PCB_4430				20000
+#define OMAP_GRADIENT_SLOPE_W_PCB_4460				1142
+#define OMAP_GRADIENT_CONST_W_PCB_4460				-393
+#define OMAP_GRADIENT_SLOPE_W_PCB_4470				1063
+#define OMAP_GRADIENT_CONST_W_PCB_4470				-477
+
+#define OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU			100
+#define OMAP_GRADIENT_CONST_W_PCB_5430_CPU			484
+#define OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU			464
+#define OMAP_GRADIENT_CONST_W_PCB_5430_GPU			-5102
+
+#define DRA752_GRADIENT_SLOPE_W_PCB				0
+#define DRA752_GRADIENT_CONST_W_PCB				2000
+
+/* trip points of interest in milicelsius (at hotspot level) */
+#define OMAP_TRIP_COLD						100000
+#define OMAP_TRIP_HOT						110000
+#define OMAP_TRIP_SHUTDOWN					125000
+#define OMAP_TRIP_NUMBER					2
+#define OMAP_TRIP_STEP							\
+	((OMAP_TRIP_SHUTDOWN - OMAP_TRIP_HOT) / (OMAP_TRIP_NUMBER - 1))
+
+/* Update rates */
+#define FAST_TEMP_MONITORING_RATE				250
+
+/* helper macros */
+/**
+ * ti_thermal_get_trip_value - returns trip temperature based on index
+ * @i:	trip index
+ */
+#define ti_thermal_get_trip_value(i)					\
+	(OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP))
+
+/**
+ * ti_thermal_is_valid_trip - check for trip index
+ * @i:	trip index
+ */
+#define ti_thermal_is_valid_trip(trip)				\
+	((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
+
+#ifdef CONFIG_TI_THERMAL
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain);
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id);
+int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id);
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id);
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id);
+#else
+static inline
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain)
+{
+	return 0;
+}
+
+static inline
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
+{
+	return 0;
+}
+
+static inline
+int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
+{
+	return 0;
+}
+
+static inline
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
+{
+	return 0;
+}
+
+static inline
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
+{
+	return 0;
+}
+#endif
+#endif
diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
new file mode 100644
index 000000000..4111d99ef
--- /dev/null
+++ b/drivers/thermal/uniphier_thermal.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * uniphier_thermal.c - Socionext UniPhier thermal driver
+ * Copyright 2014      Panasonic Corporation
+ * Copyright 2016-2017 Socionext Inc.
+ * Author:
+ *	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+/*
+ * block registers
+ * addresses are the offset from .block_base
+ */
+#define PVTCTLEN			0x0000
+#define PVTCTLEN_EN			BIT(0)
+
+#define PVTCTLMODE			0x0004
+#define PVTCTLMODE_MASK			0xf
+#define PVTCTLMODE_TEMPMON		0x5
+
+#define EMONREPEAT			0x0040
+#define EMONREPEAT_ENDLESS		BIT(24)
+#define EMONREPEAT_PERIOD		GENMASK(3, 0)
+#define EMONREPEAT_PERIOD_1000000	0x9
+
+/*
+ * common registers
+ * addresses are the offset from .map_base
+ */
+#define PVTCTLSEL			0x0900
+#define PVTCTLSEL_MASK			GENMASK(2, 0)
+#define PVTCTLSEL_MONITOR		0
+
+#define SETALERT0			0x0910
+#define SETALERT1			0x0914
+#define SETALERT2			0x0918
+#define SETALERT_TEMP_OVF		(GENMASK(7, 0) << 16)
+#define SETALERT_TEMP_OVF_VALUE(val)	(((val) & GENMASK(7, 0)) << 16)
+#define SETALERT_EN			BIT(0)
+
+#define PMALERTINTCTL			0x0920
+#define PMALERTINTCTL_CLR(ch)		BIT(4 * (ch) + 2)
+#define PMALERTINTCTL_SET(ch)		BIT(4 * (ch) + 1)
+#define PMALERTINTCTL_EN(ch)		BIT(4 * (ch) + 0)
+#define PMALERTINTCTL_MASK		(GENMASK(10, 8) | GENMASK(6, 4) | \
+					 GENMASK(2, 0))
+
+#define TMOD				0x0928
+#define TMOD_WIDTH			9
+
+#define TMODCOEF			0x0e5c
+
+#define TMODSETUP0_EN			BIT(30)
+#define TMODSETUP0_VAL(val)		(((val) & GENMASK(13, 0)) << 16)
+#define TMODSETUP1_EN			BIT(15)
+#define TMODSETUP1_VAL(val)		((val) & GENMASK(14, 0))
+
+/* SoC critical temperature */
+#define CRITICAL_TEMP_LIMIT		(120 * 1000)
+
+/* Max # of alert channels */
+#define ALERT_CH_NUM			3
+
+/* SoC specific thermal sensor data */
+struct uniphier_tm_soc_data {
+	u32 map_base;
+	u32 block_base;
+	u32 tmod_setup_addr;
+};
+
+struct uniphier_tm_dev {
+	struct regmap *regmap;
+	struct device *dev;
+	bool alert_en[ALERT_CH_NUM];
+	struct thermal_zone_device *tz_dev;
+	const struct uniphier_tm_soc_data *data;
+};
+
+static int uniphier_tm_initialize_sensor(struct uniphier_tm_dev *tdev)
+{
+	struct regmap *map = tdev->regmap;
+	u32 val;
+	u32 tmod_calib[2];
+	int ret;
+
+	/* stop PVT */
+	regmap_write_bits(map, tdev->data->block_base + PVTCTLEN,
+			  PVTCTLEN_EN, 0);
+
+	/*
+	 * Since SoC has a calibrated value that was set in advance,
+	 * TMODCOEF shows non-zero and PVT refers the value internally.
+	 *
+	 * If TMODCOEF shows zero, the boards don't have the calibrated
+	 * value, and the driver has to set default value from DT.
+	 */
+	ret = regmap_read(map, tdev->data->map_base + TMODCOEF, &val);
+	if (ret)
+		return ret;
+	if (!val) {
+		/* look for the default values in DT */
+		ret = of_property_read_u32_array(tdev->dev->of_node,
+						 "socionext,tmod-calibration",
+						 tmod_calib,
+						 ARRAY_SIZE(tmod_calib));
+		if (ret)
+			return ret;
+
+		regmap_write(map, tdev->data->tmod_setup_addr,
+			TMODSETUP0_EN | TMODSETUP0_VAL(tmod_calib[0]) |
+			TMODSETUP1_EN | TMODSETUP1_VAL(tmod_calib[1]));
+	}
+
+	/* select temperature mode */
+	regmap_write_bits(map, tdev->data->block_base + PVTCTLMODE,
+			  PVTCTLMODE_MASK, PVTCTLMODE_TEMPMON);
+
+	/* set monitoring period */
+	regmap_write_bits(map, tdev->data->block_base + EMONREPEAT,
+			  EMONREPEAT_ENDLESS | EMONREPEAT_PERIOD,
+			  EMONREPEAT_ENDLESS | EMONREPEAT_PERIOD_1000000);
+
+	/* set monitor mode */
+	regmap_write_bits(map, tdev->data->map_base + PVTCTLSEL,
+			  PVTCTLSEL_MASK, PVTCTLSEL_MONITOR);
+
+	return 0;
+}
+
+static void uniphier_tm_set_alert(struct uniphier_tm_dev *tdev, u32 ch,
+				  u32 temp)
+{
+	struct regmap *map = tdev->regmap;
+
+	/* set alert temperature */
+	regmap_write_bits(map, tdev->data->map_base + SETALERT0 + (ch << 2),
+			  SETALERT_EN | SETALERT_TEMP_OVF,
+			  SETALERT_EN |
+			  SETALERT_TEMP_OVF_VALUE(temp / 1000));
+}
+
+static void uniphier_tm_enable_sensor(struct uniphier_tm_dev *tdev)
+{
+	struct regmap *map = tdev->regmap;
+	int i;
+	u32 bits = 0;
+
+	for (i = 0; i < ALERT_CH_NUM; i++)
+		if (tdev->alert_en[i])
+			bits |= PMALERTINTCTL_EN(i);
+
+	/* enable alert interrupt */
+	regmap_write_bits(map, tdev->data->map_base + PMALERTINTCTL,
+			  PMALERTINTCTL_MASK, bits);
+
+	/* start PVT */
+	regmap_write_bits(map, tdev->data->block_base + PVTCTLEN,
+			  PVTCTLEN_EN, PVTCTLEN_EN);
+
+	usleep_range(700, 1500);	/* The spec note says at least 700us */
+}
+
+static void uniphier_tm_disable_sensor(struct uniphier_tm_dev *tdev)
+{
+	struct regmap *map = tdev->regmap;
+
+	/* disable alert interrupt */
+	regmap_write_bits(map, tdev->data->map_base + PMALERTINTCTL,
+			  PMALERTINTCTL_MASK, 0);
+
+	/* stop PVT */
+	regmap_write_bits(map, tdev->data->block_base + PVTCTLEN,
+			  PVTCTLEN_EN, 0);
+
+	usleep_range(1000, 2000);	/* The spec note says at least 1ms */
+}
+
+static int uniphier_tm_get_temp(struct thermal_zone_device *tz, int *out_temp)
+{
+	struct uniphier_tm_dev *tdev = tz->devdata;
+	struct regmap *map = tdev->regmap;
+	int ret;
+	u32 temp;
+
+	ret = regmap_read(map, tdev->data->map_base + TMOD, &temp);
+	if (ret)
+		return ret;
+
+	/* MSB of the TMOD field is a sign bit */
+	*out_temp = sign_extend32(temp, TMOD_WIDTH - 1) * 1000;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops uniphier_of_thermal_ops = {
+	.get_temp = uniphier_tm_get_temp,
+};
+
+static void uniphier_tm_irq_clear(struct uniphier_tm_dev *tdev)
+{
+	u32 mask = 0, bits = 0;
+	int i;
+
+	for (i = 0; i < ALERT_CH_NUM; i++) {
+		mask |= (PMALERTINTCTL_CLR(i) | PMALERTINTCTL_SET(i));
+		bits |= PMALERTINTCTL_CLR(i);
+	}
+
+	/* clear alert interrupt */
+	regmap_write_bits(tdev->regmap,
+			  tdev->data->map_base + PMALERTINTCTL, mask, bits);
+}
+
+static irqreturn_t uniphier_tm_alarm_irq(int irq, void *_tdev)
+{
+	struct uniphier_tm_dev *tdev = _tdev;
+
+	disable_irq_nosync(irq);
+	uniphier_tm_irq_clear(tdev);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t uniphier_tm_alarm_irq_thread(int irq, void *_tdev)
+{
+	struct uniphier_tm_dev *tdev = _tdev;
+
+	thermal_zone_device_update(tdev->tz_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static int uniphier_tm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	struct device_node *parent;
+	struct uniphier_tm_dev *tdev;
+	const struct thermal_trip *trips;
+	int i, ret, irq, ntrips, crit_temp = INT_MAX;
+
+	tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL);
+	if (!tdev)
+		return -ENOMEM;
+	tdev->dev = dev;
+
+	tdev->data = of_device_get_match_data(dev);
+	if (WARN_ON(!tdev->data))
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/* get regmap from syscon node */
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to get regmap (error %ld)\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+	tdev->regmap = regmap;
+
+	ret = uniphier_tm_initialize_sensor(tdev);
+	if (ret) {
+		dev_err(dev, "failed to initialize sensor\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, uniphier_tm_alarm_irq,
+					uniphier_tm_alarm_irq_thread,
+					0, "thermal", tdev);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, tdev);
+
+	tdev->tz_dev = devm_thermal_of_zone_register(dev, 0, tdev,
+						     &uniphier_of_thermal_ops);
+	if (IS_ERR(tdev->tz_dev)) {
+		dev_err(dev, "failed to register sensor device\n");
+		return PTR_ERR(tdev->tz_dev);
+	}
+
+	/* get trip points */
+	trips = of_thermal_get_trip_points(tdev->tz_dev);
+	ntrips = of_thermal_get_ntrips(tdev->tz_dev);
+	if (ntrips > ALERT_CH_NUM) {
+		dev_err(dev, "thermal zone has too many trips\n");
+		return -E2BIG;
+	}
+
+	/* set alert temperatures */
+	for (i = 0; i < ntrips; i++) {
+		if (trips[i].type == THERMAL_TRIP_CRITICAL &&
+		    trips[i].temperature < crit_temp)
+			crit_temp = trips[i].temperature;
+		uniphier_tm_set_alert(tdev, i, trips[i].temperature);
+		tdev->alert_en[i] = true;
+	}
+	if (crit_temp > CRITICAL_TEMP_LIMIT) {
+		dev_err(dev, "critical trip is over limit(>%d), or not set\n",
+			CRITICAL_TEMP_LIMIT);
+		return -EINVAL;
+	}
+
+	uniphier_tm_enable_sensor(tdev);
+
+	return 0;
+}
+
+static int uniphier_tm_remove(struct platform_device *pdev)
+{
+	struct uniphier_tm_dev *tdev = platform_get_drvdata(pdev);
+
+	/* disable sensor */
+	uniphier_tm_disable_sensor(tdev);
+
+	return 0;
+}
+
+static const struct uniphier_tm_soc_data uniphier_pxs2_tm_data = {
+	.map_base        = 0xe000,
+	.block_base      = 0xe000,
+	.tmod_setup_addr = 0xe904,
+};
+
+static const struct uniphier_tm_soc_data uniphier_ld20_tm_data = {
+	.map_base        = 0xe000,
+	.block_base      = 0xe800,
+	.tmod_setup_addr = 0xe938,
+};
+
+static const struct of_device_id uniphier_tm_dt_ids[] = {
+	{
+		.compatible = "socionext,uniphier-pxs2-thermal",
+		.data       = &uniphier_pxs2_tm_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-thermal",
+		.data       = &uniphier_ld20_tm_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-thermal",
+		.data       = &uniphier_ld20_tm_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-thermal",
+		.data       = &uniphier_ld20_tm_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids);
+
+static struct platform_driver uniphier_tm_driver = {
+	.probe = uniphier_tm_probe,
+	.remove = uniphier_tm_remove,
+	.driver = {
+		.name = "uniphier-thermal",
+		.of_match_table = uniphier_tm_dt_ids,
+	},
+};
+module_platform_driver(uniphier_tm_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier thermal driver");
+MODULE_LICENSE("GPL v2");