diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/gadget/udc/atmel_usba_udc.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/gadget/udc/atmel_usba_udc.c')
-rw-r--r-- | drivers/usb/gadget/udc/atmel_usba_udc.c | 2465 |
1 files changed, 2465 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c new file mode 100644 index 000000000..53ca38c4b --- /dev/null +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -0,0 +1,2465 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Atmel USBA high speed USB device controller + * + * Copyright (C) 2005-2007 Atmel Corporation + */ +#include <linux/clk.h> +#include <linux/clk/at91_pmc.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/ctype.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/irq.h> +#include <linux/gpio/consumer.h> + +#include "atmel_usba_udc.h" +#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \ + | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING) + +#ifdef CONFIG_USB_GADGET_DEBUG_FS +#include <linux/debugfs.h> +#include <linux/uaccess.h> + +static int queue_dbg_open(struct inode *inode, struct file *file) +{ + struct usba_ep *ep = inode->i_private; + struct usba_request *req, *req_copy; + struct list_head *queue_data; + + queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL); + if (!queue_data) + return -ENOMEM; + INIT_LIST_HEAD(queue_data); + + spin_lock_irq(&ep->udc->lock); + list_for_each_entry(req, &ep->queue, queue) { + req_copy = kmemdup(req, sizeof(*req_copy), GFP_ATOMIC); + if (!req_copy) + goto fail; + list_add_tail(&req_copy->queue, queue_data); + } + spin_unlock_irq(&ep->udc->lock); + + file->private_data = queue_data; + return 0; + +fail: + spin_unlock_irq(&ep->udc->lock); + list_for_each_entry_safe(req, req_copy, queue_data, queue) { + list_del(&req->queue); + kfree(req); + } + kfree(queue_data); + return -ENOMEM; +} + +/* + * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0 + * + * b: buffer address + * l: buffer length + * I/i: interrupt/no interrupt + * Z/z: zero/no zero + * S/s: short ok/short not ok + * s: status + * n: nr_packets + * F/f: submitted/not submitted to FIFO + * D/d: using/not using DMA + * L/l: last transaction/not last transaction + */ +static ssize_t queue_dbg_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct list_head *queue = file->private_data; + struct usba_request *req, *tmp_req; + size_t len, remaining, actual = 0; + char tmpbuf[38]; + + if (!access_ok(buf, nbytes)) + return -EFAULT; + + inode_lock(file_inode(file)); + list_for_each_entry_safe(req, tmp_req, queue, queue) { + len = snprintf(tmpbuf, sizeof(tmpbuf), + "%8p %08x %c%c%c %5d %c%c%c\n", + req->req.buf, req->req.length, + req->req.no_interrupt ? 'i' : 'I', + req->req.zero ? 'Z' : 'z', + req->req.short_not_ok ? 's' : 'S', + req->req.status, + req->submitted ? 'F' : 'f', + req->using_dma ? 'D' : 'd', + req->last_transaction ? 'L' : 'l'); + len = min(len, sizeof(tmpbuf)); + if (len > nbytes) + break; + + list_del(&req->queue); + kfree(req); + + remaining = __copy_to_user(buf, tmpbuf, len); + actual += len - remaining; + if (remaining) + break; + + nbytes -= len; + buf += len; + } + inode_unlock(file_inode(file)); + + return actual; +} + +static int queue_dbg_release(struct inode *inode, struct file *file) +{ + struct list_head *queue_data = file->private_data; + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, queue_data, queue) { + list_del(&req->queue); + kfree(req); + } + kfree(queue_data); + return 0; +} + +static int regs_dbg_open(struct inode *inode, struct file *file) +{ + struct usba_udc *udc; + unsigned int i; + u32 *data; + int ret = -ENOMEM; + + inode_lock(inode); + udc = inode->i_private; + data = kmalloc(inode->i_size, GFP_KERNEL); + if (!data) + goto out; + + spin_lock_irq(&udc->lock); + for (i = 0; i < inode->i_size / 4; i++) + data[i] = readl_relaxed(udc->regs + i * 4); + spin_unlock_irq(&udc->lock); + + file->private_data = data; + ret = 0; + +out: + inode_unlock(inode); + + return ret; +} + +static ssize_t regs_dbg_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct inode *inode = file_inode(file); + int ret; + + inode_lock(inode); + ret = simple_read_from_buffer(buf, nbytes, ppos, + file->private_data, + file_inode(file)->i_size); + inode_unlock(inode); + + return ret; +} + +static int regs_dbg_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static const struct file_operations queue_dbg_fops = { + .owner = THIS_MODULE, + .open = queue_dbg_open, + .llseek = no_llseek, + .read = queue_dbg_read, + .release = queue_dbg_release, +}; + +static const struct file_operations regs_dbg_fops = { + .owner = THIS_MODULE, + .open = regs_dbg_open, + .llseek = generic_file_llseek, + .read = regs_dbg_read, + .release = regs_dbg_release, +}; + +static void usba_ep_init_debugfs(struct usba_udc *udc, + struct usba_ep *ep) +{ + struct dentry *ep_root; + + ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root); + ep->debugfs_dir = ep_root; + + debugfs_create_file("queue", 0400, ep_root, ep, &queue_dbg_fops); + if (ep->can_dma) + debugfs_create_u32("dma_status", 0400, ep_root, + &ep->last_dma_status); + if (ep_is_control(ep)) + debugfs_create_u32("state", 0400, ep_root, &ep->state); +} + +static void usba_ep_cleanup_debugfs(struct usba_ep *ep) +{ + debugfs_remove_recursive(ep->debugfs_dir); +} + +static void usba_init_debugfs(struct usba_udc *udc) +{ + struct dentry *root; + struct resource *regs_resource; + + root = debugfs_create_dir(udc->gadget.name, usb_debug_root); + udc->debugfs_root = root; + + regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM, + CTRL_IOMEM_ID); + + if (regs_resource) { + debugfs_create_file_size("regs", 0400, root, udc, + ®s_dbg_fops, + resource_size(regs_resource)); + } + + usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0)); +} + +static void usba_cleanup_debugfs(struct usba_udc *udc) +{ + usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0)); + debugfs_remove_recursive(udc->debugfs_root); +} +#else +static inline void usba_ep_init_debugfs(struct usba_udc *udc, + struct usba_ep *ep) +{ + +} + +static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep) +{ + +} + +static inline void usba_init_debugfs(struct usba_udc *udc) +{ + +} + +static inline void usba_cleanup_debugfs(struct usba_udc *udc) +{ + +} +#endif + +static ushort fifo_mode; + +module_param(fifo_mode, ushort, 0x0); +MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode"); + +/* mode 0 - uses autoconfig */ + +/* mode 1 - fits in 8KB, generic max fifo configuration */ +static struct usba_fifo_cfg mode_1_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 4, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 5, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 6, .fifo_size = 1024, .nr_banks = 1, }, +}; + +/* mode 2 - fits in 8KB, performance max fifo configuration */ +static struct usba_fifo_cfg mode_2_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 3, }, +{ .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 2, }, +}; + +/* mode 3 - fits in 8KB, mixed fifo configuration */ +static struct usba_fifo_cfg mode_3_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 6, .fifo_size = 512, .nr_banks = 2, }, +}; + +/* mode 4 - fits in 8KB, custom fifo configuration */ +static struct usba_fifo_cfg mode_4_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 8, .nr_banks = 2, }, +{ .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 6, .fifo_size = 16, .nr_banks = 2, }, +{ .hw_ep_num = 7, .fifo_size = 8, .nr_banks = 2, }, +{ .hw_ep_num = 8, .fifo_size = 8, .nr_banks = 2, }, +}; +/* Add additional configurations here */ + +static int usba_config_fifo_table(struct usba_udc *udc) +{ + int n; + + switch (fifo_mode) { + default: + fifo_mode = 0; + fallthrough; + case 0: + udc->fifo_cfg = NULL; + n = 0; + break; + case 1: + udc->fifo_cfg = mode_1_cfg; + n = ARRAY_SIZE(mode_1_cfg); + break; + case 2: + udc->fifo_cfg = mode_2_cfg; + n = ARRAY_SIZE(mode_2_cfg); + break; + case 3: + udc->fifo_cfg = mode_3_cfg; + n = ARRAY_SIZE(mode_3_cfg); + break; + case 4: + udc->fifo_cfg = mode_4_cfg; + n = ARRAY_SIZE(mode_4_cfg); + break; + } + DBG(DBG_HW, "Setup fifo_mode %d\n", fifo_mode); + + return n; +} + +static inline u32 usba_int_enb_get(struct usba_udc *udc) +{ + return udc->int_enb_cache; +} + +static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask) +{ + u32 val; + + val = udc->int_enb_cache | mask; + usba_writel(udc, INT_ENB, val); + udc->int_enb_cache = val; +} + +static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask) +{ + u32 val; + + val = udc->int_enb_cache & ~mask; + usba_writel(udc, INT_ENB, val); + udc->int_enb_cache = val; +} + +static int vbus_is_present(struct usba_udc *udc) +{ + if (udc->vbus_pin) + return gpiod_get_value(udc->vbus_pin); + + /* No Vbus detection: Assume always present */ + return 1; +} + +static void toggle_bias(struct usba_udc *udc, int is_on) +{ + if (udc->errata && udc->errata->toggle_bias) + udc->errata->toggle_bias(udc, is_on); +} + +static void generate_bias_pulse(struct usba_udc *udc) +{ + if (!udc->bias_pulse_needed) + return; + + if (udc->errata && udc->errata->pulse_bias) + udc->errata->pulse_bias(udc); + + udc->bias_pulse_needed = false; +} + +static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) +{ + unsigned int transaction_len; + + transaction_len = req->req.length - req->req.actual; + req->last_transaction = 1; + if (transaction_len > ep->ep.maxpacket) { + transaction_len = ep->ep.maxpacket; + req->last_transaction = 0; + } else if (transaction_len == ep->ep.maxpacket && req->req.zero) + req->last_transaction = 0; + + DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n", + ep->ep.name, req, transaction_len, + req->last_transaction ? ", done" : ""); + + memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + req->req.actual += transaction_len; +} + +static void submit_request(struct usba_ep *ep, struct usba_request *req) +{ + DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n", + ep->ep.name, req, req->req.length); + + req->req.actual = 0; + req->submitted = 1; + + if (req->using_dma) { + if (req->req.length == 0) { + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + return; + } + + if (req->req.zero) + usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET); + else + usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET); + + usba_dma_writel(ep, ADDRESS, req->req.dma); + usba_dma_writel(ep, CONTROL, req->ctrl); + } else { + next_fifo_transaction(ep, req); + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + if (ep_is_control(ep)) + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } else { + if (ep_is_control(ep)) + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + } + } +} + +static void submit_next_request(struct usba_ep *ep) +{ + struct usba_request *req; + + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + if (!req->submitted) + submit_request(ep, req); +} + +static void send_status(struct usba_udc *udc, struct usba_ep *ep) +{ + ep->state = STATUS_STAGE_IN; + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); +} + +static void receive_data(struct usba_ep *ep) +{ + struct usba_udc *udc = ep->udc; + struct usba_request *req; + unsigned long status; + unsigned int bytecount, nr_busy; + int is_complete = 0; + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy); + + while (nr_busy > 0) { + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + break; + } + req = list_entry(ep->queue.next, + struct usba_request, queue); + + bytecount = USBA_BFEXT(BYTE_COUNT, status); + + if (status & (1 << 31)) + is_complete = 1; + if (req->req.actual + bytecount >= req->req.length) { + is_complete = 1; + bytecount = req->req.length - req->req.actual; + } + + memcpy_fromio(req->req.buf + req->req.actual, + ep->fifo, bytecount); + req->req.actual += bytecount; + + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + + if (is_complete) { + DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name); + req->req.status = 0; + list_del_init(&req->queue); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); + } + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + if (is_complete && ep_is_control(ep)) { + send_status(udc, ep); + break; + } + } +} + +static void +request_complete(struct usba_ep *ep, struct usba_request *req, int status) +{ + struct usba_udc *udc = ep->udc; + + WARN_ON(!list_empty(&req->queue)); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + if (req->using_dma) + usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in); + + DBG(DBG_GADGET | DBG_REQ, + "%s: req %p complete: status %d, actual %u\n", + ep->ep.name, req, req->req.status, req->req.actual); + + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +static void +request_complete_list(struct usba_ep *ep, struct list_head *list, int status) +{ + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, list, queue) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } +} + +static int +usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags, maxpacket; + unsigned int nr_trans; + + DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); + + maxpacket = usb_endpoint_maxp(desc); + + if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) + || ep->index == 0 + || desc->bDescriptorType != USB_DT_ENDPOINT + || maxpacket == 0 + || maxpacket > ep->fifo_size) { + DBG(DBG_ERR, "ep_enable: Invalid argument"); + return -EINVAL; + } + + ep->is_isoc = 0; + ep->is_in = 0; + + DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n", + ep->ep.name, ep->ept_cfg, maxpacket); + + if (usb_endpoint_dir_in(desc)) { + ep->is_in = 1; + ep->ept_cfg |= USBA_EPT_DIR_IN; + } + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); + break; + case USB_ENDPOINT_XFER_ISOC: + if (!ep->can_isoc) { + DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n", + ep->ep.name); + return -EINVAL; + } + + /* + * Bits 11:12 specify number of _additional_ + * transactions per microframe. + */ + nr_trans = usb_endpoint_maxp_mult(desc); + if (nr_trans > 3) + return -EINVAL; + + ep->is_isoc = 1; + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); + ep->ept_cfg |= USBA_BF(NB_TRANS, nr_trans); + + break; + case USB_ENDPOINT_XFER_BULK: + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); + break; + case USB_ENDPOINT_XFER_INT: + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); + break; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + + ep->ep.desc = desc; + ep->ep.maxpacket = maxpacket; + + usba_ep_writel(ep, CFG, ep->ept_cfg); + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + + if (ep->can_dma) { + u32 ctrl; + + usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) | + USBA_BF(DMA_INT, 1 << ep->index)); + ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA; + usba_ep_writel(ep, CTL_ENB, ctrl); + } else { + usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index)); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index, + (unsigned long)usba_ep_readl(ep, CFG)); + DBG(DBG_HW, "INT_ENB after init: %#08lx\n", + (unsigned long)usba_int_enb_get(udc)); + + return 0; +} + +static int usba_ep_disable(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + LIST_HEAD(req_list); + unsigned long flags; + + DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name); + + spin_lock_irqsave(&udc->lock, flags); + + if (!ep->ep.desc) { + spin_unlock_irqrestore(&udc->lock, flags); + DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name); + return -EINVAL; + } + ep->ep.desc = NULL; + + list_splice_init(&ep->queue, &req_list); + if (ep->can_dma) { + usba_dma_writel(ep, CONTROL, 0); + usba_dma_writel(ep, ADDRESS, 0); + usba_dma_readl(ep, STATUS); + } + usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE); + usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index)); + + request_complete_list(ep, &req_list, -ESHUTDOWN); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static struct usb_request * +usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct usba_request *req; + + DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void +usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_request *req = to_usba_req(_req); + + DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req); + + kfree(req); +} + +static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, + struct usba_request *req, gfp_t gfp_flags) +{ + unsigned long flags; + int ret; + + DBG(DBG_DMA, "%s: req l/%u d/%pad %c%c%c\n", + ep->ep.name, req->req.length, &req->req.dma, + req->req.zero ? 'Z' : 'z', + req->req.short_not_ok ? 'S' : 's', + req->req.no_interrupt ? 'I' : 'i'); + + if (req->req.length > 0x10000) { + /* Lengths from 0 to 65536 (inclusive) are supported */ + DBG(DBG_ERR, "invalid request length %u\n", req->req.length); + return -EINVAL; + } + + ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in); + if (ret) + return ret; + + req->using_dma = 1; + req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length) + | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE + | USBA_DMA_END_BUF_EN; + + if (!ep->is_in) + req->ctrl |= USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; + + /* + * Add this request to the queue and submit for DMA if + * possible. Check if we're still alive first -- we may have + * received a reset since last time we checked. + */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->ep.desc) { + if (list_empty(&ep->queue)) + submit_request(ep, req); + + list_add_tail(&req->queue, &ep->queue); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct usba_request *req = to_usba_req(_req); + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret; + + DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", + ep->ep.name, req, _req->length); + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || + !ep->ep.desc) + return -ESHUTDOWN; + + req->submitted = 0; + req->using_dma = 0; + req->last_transaction = 0; + + _req->status = -EINPROGRESS; + _req->actual = 0; + + if (ep->can_dma) + return queue_dma(udc, ep, req, gfp_flags); + + /* May have received a reset since last time we checked */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->ep.desc) { + list_add_tail(&req->queue, &ep->queue); + + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) + && (ep->state == DATA_STAGE_IN + || ep->state == STATUS_STAGE_IN))) + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + else + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static void +usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status) +{ + req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status); +} + +static int stop_dma(struct usba_ep *ep, u32 *pstatus) +{ + unsigned int timeout; + u32 status; + + /* + * Stop the DMA controller. When writing both CH_EN + * and LINK to 0, the other bits are not affected. + */ + usba_dma_writel(ep, CONTROL, 0); + + /* Wait for the FIFO to empty */ + for (timeout = 40; timeout; --timeout) { + status = usba_dma_readl(ep, STATUS); + if (!(status & USBA_DMA_CH_EN)) + break; + udelay(1); + } + + if (pstatus) + *pstatus = status; + + if (timeout == 0) { + dev_err(&ep->udc->pdev->dev, + "%s: timed out waiting for DMA FIFO to empty\n", + ep->ep.name); + return -ETIMEDOUT; + } + + return 0; +} + +static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + struct usba_request *req = NULL; + struct usba_request *iter; + unsigned long flags; + u32 status; + + DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", + ep->ep.name, _req); + + spin_lock_irqsave(&udc->lock, flags); + + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + + if (!req) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + if (req->using_dma) { + /* + * If this request is currently being transferred, + * stop the DMA controller and reset the FIFO. + */ + if (ep->queue.next == &req->queue) { + status = usba_dma_readl(ep, STATUS); + if (status & USBA_DMA_CH_EN) + stop_dma(ep, &status); + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + ep->last_dma_status = status; +#endif + + usba_writel(udc, EPT_RST, 1 << ep->index); + + usba_update_req(ep, req, status); + } + } + + /* + * Errors should stop the queue from advancing until the + * completion function returns. + */ + list_del_init(&req->queue); + + request_complete(ep, req, -ECONNRESET); + + /* Process the next request if any */ + submit_next_request(ep); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int usba_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret = 0; + + DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, + value ? "set" : "clear"); + + if (!ep->ep.desc) { + DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", + ep->ep.name); + return -ENODEV; + } + if (ep->is_isoc) { + DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n", + ep->ep.name); + return -ENOTTY; + } + + spin_lock_irqsave(&udc->lock, flags); + + /* + * We can't halt IN endpoints while there are still data to be + * transferred + */ + if (!list_empty(&ep->queue) + || ((value && ep->is_in && (usba_ep_readl(ep, STA) + & USBA_BF(BUSY_BANKS, -1L))))) { + ret = -EAGAIN; + } else { + if (value) + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + else + usba_ep_writel(ep, CLR_STA, + USBA_FORCE_STALL | USBA_TOGGLE_CLR); + usba_ep_readl(ep, STA); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int usba_ep_fifo_status(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + + return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); +} + +static void usba_ep_fifo_flush(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + + usba_writel(udc, EPT_RST, 1 << ep->index); +} + +static const struct usb_ep_ops usba_ep_ops = { + .enable = usba_ep_enable, + .disable = usba_ep_disable, + .alloc_request = usba_ep_alloc_request, + .free_request = usba_ep_free_request, + .queue = usba_ep_queue, + .dequeue = usba_ep_dequeue, + .set_halt = usba_ep_set_halt, + .fifo_status = usba_ep_fifo_status, + .fifo_flush = usba_ep_fifo_flush, +}; + +static int usba_udc_get_frame(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + + return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM)); +} + +static int usba_udc_wakeup(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + u32 ctrl; + int ret = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + ctrl = usba_readl(udc, CTRL); + usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + + gadget->is_selfpowered = (is_selfpowered != 0); + spin_lock_irqsave(&udc->lock, flags); + if (is_selfpowered) + udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on); +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int atmel_usba_stop(struct usb_gadget *gadget); + +static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp) +{ + struct usb_ep *_ep; + struct usba_ep *ep; + + /* Look at endpoints until an unclaimed one looks usable */ + list_for_each_entry(_ep, &gadget->ep_list, ep_list) { + if (usb_gadget_ep_match_desc(gadget, _ep, desc, ep_comp)) + goto found_ep; + } + /* Fail */ + return NULL; + +found_ep: + + if (fifo_mode == 0) { + /* Optimize hw fifo size based on ep type and other info */ + ep = to_usba_ep(_ep); + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + ep->nr_banks = 1; + break; + + case USB_ENDPOINT_XFER_ISOC: + ep->fifo_size = 1024; + if (ep->udc->ep_prealloc) + ep->nr_banks = 2; + break; + + case USB_ENDPOINT_XFER_BULK: + ep->fifo_size = 512; + if (ep->udc->ep_prealloc) + ep->nr_banks = 1; + break; + + case USB_ENDPOINT_XFER_INT: + if (desc->wMaxPacketSize == 0) + ep->fifo_size = + roundup_pow_of_two(_ep->maxpacket_limit); + else + ep->fifo_size = + roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize)); + if (ep->udc->ep_prealloc) + ep->nr_banks = 1; + break; + } + + /* It might be a little bit late to set this */ + usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); + + /* Generate ept_cfg basd on FIFO size and number of banks */ + if (ep->fifo_size <= 8) + ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ep->ept_cfg = + USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); + + ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); + } + + return _ep; +} + +static const struct usb_gadget_ops usba_udc_ops = { + .get_frame = usba_udc_get_frame, + .wakeup = usba_udc_wakeup, + .set_selfpowered = usba_udc_set_selfpowered, + .pullup = atmel_usba_pullup, + .udc_start = atmel_usba_start, + .udc_stop = atmel_usba_stop, + .match_ep = atmel_usba_match_ep, +}; + +static struct usb_endpoint_descriptor usba_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(64), + /* FIXME: I have no idea what to put here */ + .bInterval = 1, +}; + +static const struct usb_gadget usba_gadget_template = { + .ops = &usba_udc_ops, + .max_speed = USB_SPEED_HIGH, + .name = "atmel_usba_udc", +}; + +/* + * Called with interrupts disabled and udc->lock held. + */ +static void reset_all_endpoints(struct usba_udc *udc) +{ + struct usba_ep *ep; + struct usba_request *req, *tmp_req; + + usba_writel(udc, EPT_RST, ~0UL); + + ep = to_usba_ep(udc->gadget.ep0); + list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) { + list_del_init(&req->queue); + request_complete(ep, req, -ECONNRESET); + } +} + +static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) +{ + struct usba_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return to_usba_ep(udc->gadget.ep0); + + list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->ep.desc) + continue; + bEndpointAddress = ep->ep.desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) + == (wIndex & USB_ENDPOINT_NUMBER_MASK)) + return ep; + } + + return NULL; +} + +/* Called with interrupts disabled and udc->lock held */ +static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep) +{ + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + ep->state = WAIT_FOR_SETUP; +} + +static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep) +{ + if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL) + return 1; + return 0; +} + +static inline void set_address(struct usba_udc *udc, unsigned int addr) +{ + u32 regval; + + DBG(DBG_BUS, "setting address %u...\n", addr); + regval = usba_readl(udc, CTRL); + regval = USBA_BFINS(DEV_ADDR, addr, regval); + usba_writel(udc, CTRL, regval); +} + +static int do_test_mode(struct usba_udc *udc) +{ + static const char test_packet_buffer[] = { + /* JKJKJKJK * 9 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* JJKKJJKK * 8 */ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, + /* JJKKJJKK * 8 */ + 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, + /* JJJJJJJKKKKKKK * 8 */ + 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + /* JJJJJJJK * 8 */ + 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, + /* {JKKKKKKK * 10}, JK */ + 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E + }; + struct usba_ep *ep; + struct device *dev = &udc->pdev->dev; + int test_mode; + + test_mode = udc->test_mode; + + /* Start from a clean slate */ + reset_all_endpoints(udc); + + switch (test_mode) { + case 0x0100: + /* Test_J */ + usba_writel(udc, TST, USBA_TST_J_MODE); + dev_info(dev, "Entering Test_J mode...\n"); + break; + case 0x0200: + /* Test_K */ + usba_writel(udc, TST, USBA_TST_K_MODE); + dev_info(dev, "Entering Test_K mode...\n"); + break; + case 0x0300: + /* + * Test_SE0_NAK: Force high-speed mode and set up ep0 + * for Bulk IN transfers + */ + ep = &udc->usba_ep[0]; + usba_writel(udc, TST, + USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH)); + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + dev_info(dev, "Entering Test_SE0_NAK mode...\n"); + } + break; + case 0x0400: + /* Test_Packet */ + ep = &udc->usba_ep[0]; + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + dev_err(dev, "Test_Packet: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + usba_writel(udc, TST, USBA_TST_PKT_MODE); + memcpy_toio(ep->fifo, test_packet_buffer, + sizeof(test_packet_buffer)); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + dev_info(dev, "Entering Test_Packet mode...\n"); + } + break; + default: + dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode); + return -EINVAL; + } + + return 0; +} + +/* Avoid overly long expressions */ +static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) + return true; + return false; +} + +static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE)) + return true; + return false; +} + +static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT)) + return true; + return false; +} + +static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, + struct usb_ctrlrequest *crq) +{ + int retval = 0; + + switch (crq->bRequest) { + case USB_REQ_GET_STATUS: { + u16 status; + + if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) { + status = cpu_to_le16(udc->devstatus); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_INTERFACE)) { + status = cpu_to_le16(0); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_ENDPOINT)) { + struct usba_ep *target; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + status = 0; + if (is_stalled(udc, target)) + status |= cpu_to_le16(1); + } else + goto delegate; + + /* Write directly to the FIFO. No queueing is done. */ + if (crq->wLength != cpu_to_le16(sizeof(status))) + goto stall; + ep->state = DATA_STAGE_IN; + writew_relaxed(status, ep->fifo); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + break; + } + + case USB_REQ_CLEAR_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_remote_wakeup(crq)) + udc->devstatus + &= ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + /* Can't CLEAR_FEATURE TEST_MODE */ + goto stall; + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != cpu_to_le16(0) + || !feature_is_ep_halt(crq)) + goto stall; + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL); + if (target->index != 0) + usba_ep_writel(target, CLR_STA, + USBA_TOGGLE_CLR); + } else { + goto delegate; + } + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_test_mode(crq)) { + send_status(udc, ep); + ep->state = STATUS_STAGE_TEST; + udc->test_mode = le16_to_cpu(crq->wIndex); + return 0; + } else if (feature_is_dev_remote_wakeup(crq)) { + udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP; + } else { + goto stall; + } + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != cpu_to_le16(0) + || !feature_is_ep_halt(crq)) + goto stall; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, SET_STA, USBA_FORCE_STALL); + } else + goto delegate; + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_ADDRESS: + if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) + goto delegate; + + set_address(udc, le16_to_cpu(crq->wValue)); + send_status(udc, ep); + ep->state = STATUS_STAGE_ADDR; + break; + + default: +delegate: + spin_unlock(&udc->lock); + retval = udc->driver->setup(&udc->gadget, crq); + spin_lock(&udc->lock); + } + + return retval; + +stall: + pr_err("udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, " + "halting endpoint...\n", + ep->ep.name, crq->bRequestType, crq->bRequest, + le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex), + le16_to_cpu(crq->wLength)); + set_protocol_stall(udc, ep); + return -1; +} + +static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + +restart: + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n", + ep->ep.name, ep->state, epstatus, epctrl); + + req = NULL; + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct usba_request, queue); + + if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } + goto restart; + } + if ((epstatus & epctrl) & USBA_TX_COMPLETE) { + usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE); + + switch (ep->state) { + case DATA_STAGE_IN: + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = STATUS_STAGE_OUT; + break; + case STATUS_STAGE_ADDR: + /* Activate our new address */ + usba_writel(udc, CTRL, (usba_readl(udc, CTRL) + | USBA_FADDR_EN)); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_IN: + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + submit_next_request(ep); + } + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_TEST: + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + if (do_test_mode(udc)) + set_protocol_stall(udc, ep); + break; + default: + pr_err("udc: %s: TXCOMP: Invalid endpoint state %d, " + "halting endpoint...\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + switch (ep->state) { + case STATUS_STAGE_OUT: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + } + ep->state = WAIT_FOR_SETUP; + break; + + case DATA_STAGE_OUT: + receive_data(ep); + break; + + default: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + pr_err("udc: %s: RXRDY: Invalid endpoint state %d, " + "halting endpoint...\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if (epstatus & USBA_RX_SETUP) { + union { + struct usb_ctrlrequest crq; + unsigned long data[2]; + } crq; + unsigned int pkt_len; + int ret; + + if (ep->state != WAIT_FOR_SETUP) { + /* + * Didn't expect a SETUP packet at this + * point. Clean up any pending requests (which + * may be successful). + */ + int status = -EPROTO; + + /* + * RXRDY and TXCOMP are dropped when SETUP + * packets arrive. Just pretend we received + * the status packet. + */ + if (ep->state == STATUS_STAGE_OUT + || ep->state == STATUS_STAGE_IN) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + status = 0; + } + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } + } + + pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); + DBG(DBG_HW, "Packet length: %u\n", pkt_len); + if (pkt_len != sizeof(crq)) { + pr_warn("udc: Invalid packet length %u (expected %zu)\n", + pkt_len, sizeof(crq)); + set_protocol_stall(udc, ep); + return; + } + + DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo); + memcpy_fromio(crq.data, ep->fifo, sizeof(crq)); + + /* Free up one bank in the FIFO so that we can + * generate or receive a reply right away. */ + usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP); + + /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n", + ep->state, crq.crq.bRequestType, + crq.crq.bRequest); */ + + if (crq.crq.bRequestType & USB_DIR_IN) { + /* + * The USB 2.0 spec states that "if wLength is + * zero, there is no data transfer phase." + * However, testusb #14 seems to actually + * expect a data phase even if wLength = 0... + */ + ep->state = DATA_STAGE_IN; + } else { + if (crq.crq.wLength != cpu_to_le16(0)) + ep->state = DATA_STAGE_OUT; + else + ep->state = STATUS_STAGE_IN; + } + + ret = -1; + if (ep->index == 0) + ret = handle_ep0_setup(udc, ep, &crq.crq); + else { + spin_unlock(&udc->lock); + ret = udc->driver->setup(&udc->gadget, &crq.crq); + spin_lock(&udc->lock); + } + + DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n", + crq.crq.bRequestType, crq.crq.bRequest, + le16_to_cpu(crq.crq.wLength), ep->state, ret); + + if (ret < 0) { + /* Let the host know that we failed */ + set_protocol_stall(udc, ep); + } + } +} + +static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus); + + while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name); + + if (list_empty(&ep->queue)) { + dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n"); + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + + if (req->using_dma) { + /* Send a zero-length packet */ + usba_ep_writel(ep, SET_STA, + USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_DIS, + USBA_TX_PK_RDY); + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } else { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } + } + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); + receive_data(ep); + } +} + +static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 status, control, pending; + + status = usba_dma_readl(ep, STATUS); + control = usba_dma_readl(ep, CONTROL); +#ifdef CONFIG_USB_GADGET_DEBUG_FS + ep->last_dma_status = status; +#endif + pending = status & control; + DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control); + + if (status & USBA_DMA_CH_EN) { + dev_err(&udc->pdev->dev, + "DMA_CH_EN is set after transfer is finished!\n"); + dev_err(&udc->pdev->dev, + "status=%#08x, pending=%#08x, control=%#08x\n", + status, pending, control); + + /* + * try to pretend nothing happened. We might have to + * do something here... + */ + } + + if (list_empty(&ep->queue)) + /* Might happen if a reset comes along at the right moment */ + return; + + if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) { + req = list_entry(ep->queue.next, struct usba_request, queue); + usba_update_req(ep, req, status); + + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } +} + +static int start_clock(struct usba_udc *udc); +static void stop_clock(struct usba_udc *udc); + +static irqreturn_t usba_udc_irq(int irq, void *devid) +{ + struct usba_udc *udc = devid; + u32 status, int_enb; + u32 dma_status; + u32 ep_status; + + spin_lock(&udc->lock); + + int_enb = usba_int_enb_get(udc); + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); + DBG(DBG_INT, "irq, status=%#08x\n", status); + + if (status & USBA_DET_SUSPEND) { + usba_writel(udc, INT_CLR, USBA_DET_SUSPEND|USBA_WAKE_UP); + usba_int_enb_set(udc, USBA_WAKE_UP); + usba_int_enb_clear(udc, USBA_DET_SUSPEND); + udc->suspended = true; + toggle_bias(udc, 0); + udc->bias_pulse_needed = true; + stop_clock(udc); + DBG(DBG_BUS, "Suspend detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (status & USBA_WAKE_UP) { + start_clock(udc); + toggle_bias(udc, 1); + usba_writel(udc, INT_CLR, USBA_WAKE_UP); + DBG(DBG_BUS, "Wake Up CPU detected\n"); + } + + if (status & USBA_END_OF_RESUME) { + udc->suspended = false; + usba_writel(udc, INT_CLR, USBA_END_OF_RESUME); + usba_int_enb_clear(udc, USBA_WAKE_UP); + usba_int_enb_set(udc, USBA_DET_SUSPEND); + generate_bias_pulse(udc); + DBG(DBG_BUS, "Resume detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + + dma_status = USBA_BFEXT(DMA_INT, status); + if (dma_status) { + int i; + + usba_int_enb_set(udc, USBA_DET_SUSPEND); + + for (i = 1; i <= USBA_NR_DMAS; i++) + if (dma_status & (1 << i)) + usba_dma_irq(udc, &udc->usba_ep[i]); + } + + ep_status = USBA_BFEXT(EPT_INT, status); + if (ep_status) { + int i; + + usba_int_enb_set(udc, USBA_DET_SUSPEND); + + for (i = 0; i < udc->num_ep; i++) + if (ep_status & (1 << i)) { + if (ep_is_control(&udc->usba_ep[i])) + usba_control_irq(udc, &udc->usba_ep[i]); + else + usba_ep_irq(udc, &udc->usba_ep[i]); + } + } + + if (status & USBA_END_OF_RESET) { + struct usba_ep *ep0, *ep; + int i; + + usba_writel(udc, INT_CLR, + USBA_END_OF_RESET|USBA_END_OF_RESUME + |USBA_DET_SUSPEND|USBA_WAKE_UP); + generate_bias_pulse(udc); + reset_all_endpoints(udc); + + if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, udc->driver); + spin_lock(&udc->lock); + } + + if (status & USBA_HIGH_SPEED) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + DBG(DBG_BUS, "%s bus reset detected\n", + usb_speed_string(udc->gadget.speed)); + + ep0 = &udc->usba_ep[0]; + ep0->ep.desc = &usba_ep0_desc; + ep0->state = WAIT_FOR_SETUP; + usba_ep_writel(ep0, CFG, + (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL) + | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE))); + usba_ep_writel(ep0, CTL_ENB, + USBA_EPT_ENABLE | USBA_RX_SETUP); + + /* If we get reset while suspended... */ + udc->suspended = false; + usba_int_enb_clear(udc, USBA_WAKE_UP); + + usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) | + USBA_DET_SUSPEND | USBA_END_OF_RESUME); + + /* + * Unclear why we hit this irregularly, e.g. in usbtest, + * but it's clearly harmless... + */ + if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP0 configuration is invalid!\n"); + + /* Preallocate other endpoints */ + for (i = 1; i < udc->num_ep; i++) { + ep = &udc->usba_ep[i]; + if (ep->ep.claimed) { + usba_ep_writel(ep, CFG, ep->ept_cfg); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); + } + } + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static int start_clock(struct usba_udc *udc) +{ + int ret; + + if (udc->clocked) + return 0; + + pm_stay_awake(&udc->pdev->dev); + + ret = clk_prepare_enable(udc->pclk); + if (ret) + return ret; + ret = clk_prepare_enable(udc->hclk); + if (ret) { + clk_disable_unprepare(udc->pclk); + return ret; + } + + udc->clocked = true; + return 0; +} + +static void stop_clock(struct usba_udc *udc) +{ + if (!udc->clocked) + return; + + clk_disable_unprepare(udc->hclk); + clk_disable_unprepare(udc->pclk); + + udc->clocked = false; + + pm_relax(&udc->pdev->dev); +} + +static int usba_start(struct usba_udc *udc) +{ + unsigned long flags; + int ret; + + ret = start_clock(udc); + if (ret) + return ret; + + if (udc->suspended) + return 0; + + spin_lock_irqsave(&udc->lock, flags); + toggle_bias(udc, 1); + usba_writel(udc, CTRL, USBA_ENABLE_MASK); + /* Clear all requested and pending interrupts... */ + usba_writel(udc, INT_ENB, 0); + udc->int_enb_cache = 0; + usba_writel(udc, INT_CLR, + USBA_END_OF_RESET|USBA_END_OF_RESUME + |USBA_DET_SUSPEND|USBA_WAKE_UP); + /* ...and enable just 'reset' IRQ to get us started */ + usba_int_enb_set(udc, USBA_END_OF_RESET); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static void usba_stop(struct usba_udc *udc) +{ + unsigned long flags; + + if (udc->suspended) + return; + + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + + /* This will also disable the DP pullup */ + toggle_bias(udc, 0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + spin_unlock_irqrestore(&udc->lock, flags); + + stop_clock(udc); +} + +static irqreturn_t usba_vbus_irq_thread(int irq, void *devid) +{ + struct usba_udc *udc = devid; + int vbus; + + /* debounce */ + udelay(10); + + mutex_lock(&udc->vbus_mutex); + + vbus = vbus_is_present(udc); + if (vbus != udc->vbus_prev) { + if (vbus) { + usba_start(udc); + } else { + udc->suspended = false; + if (udc->driver->disconnect) + udc->driver->disconnect(&udc->gadget); + + usba_stop(udc); + } + udc->vbus_prev = vbus; + } + + mutex_unlock(&udc->vbus_mutex); + return IRQ_HANDLED; +} + +static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on) +{ + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&udc->lock, flags); + ctrl = usba_readl(udc, CTRL); + if (is_on) + ctrl &= ~USBA_DETACH; + else + ctrl |= USBA_DETACH; + usba_writel(udc, CTRL, ctrl); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + int ret; + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; + udc->driver = driver; + spin_unlock_irqrestore(&udc->lock, flags); + + mutex_lock(&udc->vbus_mutex); + + if (udc->vbus_pin) + enable_irq(gpiod_to_irq(udc->vbus_pin)); + + /* If Vbus is present, enable the controller and wait for reset */ + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) { + ret = usba_start(udc); + if (ret) + goto err; + } + + mutex_unlock(&udc->vbus_mutex); + return 0; + +err: + if (udc->vbus_pin) + disable_irq(gpiod_to_irq(udc->vbus_pin)); + + mutex_unlock(&udc->vbus_mutex); + + spin_lock_irqsave(&udc->lock, flags); + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + udc->driver = NULL; + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + +static int atmel_usba_stop(struct usb_gadget *gadget) +{ + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); + + if (udc->vbus_pin) + disable_irq(gpiod_to_irq(udc->vbus_pin)); + + udc->suspended = false; + usba_stop(udc); + + udc->driver = NULL; + + return 0; +} + +static void at91sam9rl_toggle_bias(struct usba_udc *udc, int is_on) +{ + regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, + is_on ? AT91_PMC_BIASEN : 0); +} + +static void at91sam9g45_pulse_bias(struct usba_udc *udc) +{ + regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, 0); + regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, + AT91_PMC_BIASEN); +} + +static const struct usba_udc_errata at91sam9rl_errata = { + .toggle_bias = at91sam9rl_toggle_bias, +}; + +static const struct usba_udc_errata at91sam9g45_errata = { + .pulse_bias = at91sam9g45_pulse_bias, +}; + +static const struct usba_ep_config ep_config_sam9[] = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ +}; + +static const struct usba_ep_config ep_config_sama5[] = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */ +}; + +static const struct usba_udc_config udc_at91sam9rl_cfg = { + .errata = &at91sam9rl_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_at91sam9g45_cfg = { + .errata = &at91sam9g45_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_sama5d3_cfg = { + .config = ep_config_sama5, + .num_ep = ARRAY_SIZE(ep_config_sama5), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_sam9x60_cfg = { + .num_ep = ARRAY_SIZE(ep_config_sam9), + .config = ep_config_sam9, + .ep_prealloc = false, +}; + +static const struct of_device_id atmel_udc_dt_ids[] = { + { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, + { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, + { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, + { .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); + +static const struct of_device_id atmel_pmc_dt_ids[] = { + { .compatible = "atmel,at91sam9g45-pmc" }, + { .compatible = "atmel,at91sam9rl-pmc" }, + { .compatible = "atmel,at91sam9x5-pmc" }, + { /* sentinel */ } +}; + +static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, + struct usba_udc *udc) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + struct device_node *pp; + int i, ret; + struct usba_ep *eps, *ep; + const struct usba_udc_config *udc_config; + + match = of_match_node(atmel_udc_dt_ids, np); + if (!match) + return ERR_PTR(-EINVAL); + + udc_config = match->data; + udc->ep_prealloc = udc_config->ep_prealloc; + udc->errata = udc_config->errata; + if (udc->errata) { + pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids, + NULL); + if (!pp) + return ERR_PTR(-ENODEV); + + udc->pmc = syscon_node_to_regmap(pp); + of_node_put(pp); + if (IS_ERR(udc->pmc)) + return ERR_CAST(udc->pmc); + } + + udc->num_ep = 0; + + udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus", + GPIOD_IN); + if (IS_ERR(udc->vbus_pin)) + return ERR_CAST(udc->vbus_pin); + + if (fifo_mode == 0) { + udc->num_ep = udc_config->num_ep; + } else { + udc->num_ep = usba_config_fifo_table(udc); + } + + eps = devm_kcalloc(&pdev->dev, udc->num_ep, sizeof(struct usba_ep), + GFP_KERNEL); + if (!eps) + return ERR_PTR(-ENOMEM); + + udc->gadget.ep0 = &eps[0].ep; + + INIT_LIST_HEAD(&eps[0].ep.ep_list); + + i = 0; + while (i < udc->num_ep) { + const struct usba_ep_config *ep_cfg = &udc_config->config[i]; + + ep = &eps[i]; + + ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i; + + /* Only the first EP is 64 bytes */ + if (ep->index == 0) + ep->fifo_size = 64; + else + ep->fifo_size = 1024; + + if (fifo_mode) { + if (ep->fifo_size < udc->fifo_cfg[i].fifo_size) + dev_warn(&pdev->dev, + "Using default max fifo-size value\n"); + else + ep->fifo_size = udc->fifo_cfg[i].fifo_size; + } + + ep->nr_banks = ep_cfg->nr_banks; + if (fifo_mode) { + if (ep->nr_banks < udc->fifo_cfg[i].nr_banks) + dev_warn(&pdev->dev, + "Using default max nb-banks value\n"); + else + ep->nr_banks = udc->fifo_cfg[i].nr_banks; + } + + ep->can_dma = ep_cfg->can_dma; + ep->can_isoc = ep_cfg->can_isoc; + + sprintf(ep->name, "ep%d", ep->index); + ep->ep.name = ep->name; + + ep->ep_regs = udc->regs + USBA_EPT_BASE(i); + ep->dma_regs = udc->regs + USBA_DMA_BASE(i); + ep->fifo = udc->fifo + USBA_FIFO_BASE(i); + ep->ep.ops = &usba_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); + ep->udc = udc; + INIT_LIST_HEAD(&ep->queue); + + if (ep->index == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = ep->can_isoc; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + if (fifo_mode != 0) { + /* + * Generate ept_cfg based on FIFO size and + * banks number + */ + if (ep->fifo_size <= 8) + ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ep->ept_cfg = + USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); + + ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); + } + + if (i) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + + i++; + } + + if (i == 0) { + dev_err(&pdev->dev, "of_probe: no endpoint specified\n"); + ret = -EINVAL; + goto err; + } + + return eps; +err: + return ERR_PTR(ret); +} + +static int usba_udc_probe(struct platform_device *pdev) +{ + struct resource *res; + struct clk *pclk, *hclk; + struct usba_udc *udc; + int irq, ret, i; + + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + udc->gadget = usba_gadget_template; + INIT_LIST_HEAD(&udc->gadget.ep_list); + + res = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); + udc->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(udc->regs)) + return PTR_ERR(udc->regs); + dev_info(&pdev->dev, "MMIO registers at %pR mapped at %p\n", + res, udc->regs); + + res = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); + udc->fifo = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(udc->fifo)) + return PTR_ERR(udc->fifo); + dev_info(&pdev->dev, "FIFO at %pR mapped at %p\n", res, udc->fifo); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + hclk = devm_clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) + return PTR_ERR(hclk); + + spin_lock_init(&udc->lock); + mutex_init(&udc->vbus_mutex); + udc->pdev = pdev; + udc->pclk = pclk; + udc->hclk = hclk; + + platform_set_drvdata(pdev, udc); + + /* Make sure we start from a clean slate */ + ret = clk_prepare_enable(pclk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable pclk, aborting.\n"); + return ret; + } + + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + clk_disable_unprepare(pclk); + + udc->usba_ep = atmel_udc_of_init(pdev, udc); + + toggle_bias(udc, 0); + + if (IS_ERR(udc->usba_ep)) + return PTR_ERR(udc->usba_ep); + + ret = devm_request_irq(&pdev->dev, irq, usba_udc_irq, 0, + "atmel_usba_udc", udc); + if (ret) { + dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n", + irq, ret); + return ret; + } + udc->irq = irq; + + if (udc->vbus_pin) { + irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(&pdev->dev, + gpiod_to_irq(udc->vbus_pin), NULL, + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, + "atmel_usba_udc", udc); + if (ret) { + udc->vbus_pin = NULL; + dev_warn(&udc->pdev->dev, + "failed to request vbus irq; " + "assuming always on\n"); + } + } + + ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + if (ret) + return ret; + device_init_wakeup(&pdev->dev, 1); + + usba_init_debugfs(udc); + for (i = 1; i < udc->num_ep; i++) + usba_ep_init_debugfs(udc, &udc->usba_ep[i]); + + return 0; +} + +static int usba_udc_remove(struct platform_device *pdev) +{ + struct usba_udc *udc; + int i; + + udc = platform_get_drvdata(pdev); + + device_init_wakeup(&pdev->dev, 0); + usb_del_gadget_udc(&udc->gadget); + + for (i = 1; i < udc->num_ep; i++) + usba_ep_cleanup_debugfs(&udc->usba_ep[i]); + usba_cleanup_debugfs(udc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int usba_udc_suspend(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + mutex_lock(&udc->vbus_mutex); + + if (!device_may_wakeup(dev)) { + udc->suspended = false; + usba_stop(udc); + goto out; + } + + /* + * Device may wake up. We stay clocked if we failed + * to request vbus irq, assuming always on. + */ + if (udc->vbus_pin) { + /* FIXME: right to stop here...??? */ + usba_stop(udc); + enable_irq_wake(gpiod_to_irq(udc->vbus_pin)); + } + + enable_irq_wake(udc->irq); + +out: + mutex_unlock(&udc->vbus_mutex); + return 0; +} + +static int usba_udc_resume(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + if (device_may_wakeup(dev)) { + if (udc->vbus_pin) + disable_irq_wake(gpiod_to_irq(udc->vbus_pin)); + + disable_irq_wake(udc->irq); + } + + /* If Vbus is present, enable the controller and wait for reset */ + mutex_lock(&udc->vbus_mutex); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) + usba_start(udc); + mutex_unlock(&udc->vbus_mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); + +static struct platform_driver udc_driver = { + .probe = usba_udc_probe, + .remove = usba_udc_remove, + .driver = { + .name = "atmel_usba_udc", + .pm = &usba_udc_pm_ops, + .of_match_table = atmel_udc_dt_ids, + }, +}; +module_platform_driver(udc_driver); + +MODULE_DESCRIPTION("Atmel USBA UDC driver"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_usba_udc"); |