diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/host/octeon-hcd.h | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/host/octeon-hcd.h')
-rw-r--r-- | drivers/usb/host/octeon-hcd.h | 1847 |
1 files changed, 1847 insertions, 0 deletions
diff --git a/drivers/usb/host/octeon-hcd.h b/drivers/usb/host/octeon-hcd.h new file mode 100644 index 000000000..9ed619c93 --- /dev/null +++ b/drivers/usb/host/octeon-hcd.h @@ -0,0 +1,1847 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Octeon HCD hardware register definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Some parts of the code were originally released under BSD license: + * + * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights + * reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * * Neither the name of Cavium Networks nor the names of + * its contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * This Software, including technical data, may be subject to U.S. export + * control laws, including the U.S. Export Administration Act and its associated + * regulations, and may be subject to export or import regulations in other + * countries. + * + * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" + * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR + * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO + * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION + * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM + * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, + * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF + * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR + * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. + */ + +#ifndef __OCTEON_HCD_H__ +#define __OCTEON_HCD_H__ + +#include <asm/bitfield.h> + +#define CVMX_USBCXBASE 0x00016F0010000000ull +#define CVMX_USBCXREG1(reg, bid) \ + (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \ + ((bid) & 1) * 0x100000000000ull) +#define CVMX_USBCXREG2(reg, bid, off) \ + (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \ + (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32) + +#define CVMX_USBCX_GAHBCFG(bid) CVMX_USBCXREG1(0x008, bid) +#define CVMX_USBCX_GHWCFG3(bid) CVMX_USBCXREG1(0x04c, bid) +#define CVMX_USBCX_GINTMSK(bid) CVMX_USBCXREG1(0x018, bid) +#define CVMX_USBCX_GINTSTS(bid) CVMX_USBCXREG1(0x014, bid) +#define CVMX_USBCX_GNPTXFSIZ(bid) CVMX_USBCXREG1(0x028, bid) +#define CVMX_USBCX_GNPTXSTS(bid) CVMX_USBCXREG1(0x02c, bid) +#define CVMX_USBCX_GOTGCTL(bid) CVMX_USBCXREG1(0x000, bid) +#define CVMX_USBCX_GRSTCTL(bid) CVMX_USBCXREG1(0x010, bid) +#define CVMX_USBCX_GRXFSIZ(bid) CVMX_USBCXREG1(0x024, bid) +#define CVMX_USBCX_GRXSTSPH(bid) CVMX_USBCXREG1(0x020, bid) +#define CVMX_USBCX_GUSBCFG(bid) CVMX_USBCXREG1(0x00c, bid) +#define CVMX_USBCX_HAINT(bid) CVMX_USBCXREG1(0x414, bid) +#define CVMX_USBCX_HAINTMSK(bid) CVMX_USBCXREG1(0x418, bid) +#define CVMX_USBCX_HCCHARX(off, bid) CVMX_USBCXREG2(0x500, bid, off) +#define CVMX_USBCX_HCFG(bid) CVMX_USBCXREG1(0x400, bid) +#define CVMX_USBCX_HCINTMSKX(off, bid) CVMX_USBCXREG2(0x50c, bid, off) +#define CVMX_USBCX_HCINTX(off, bid) CVMX_USBCXREG2(0x508, bid, off) +#define CVMX_USBCX_HCSPLTX(off, bid) CVMX_USBCXREG2(0x504, bid, off) +#define CVMX_USBCX_HCTSIZX(off, bid) CVMX_USBCXREG2(0x510, bid, off) +#define CVMX_USBCX_HFIR(bid) CVMX_USBCXREG1(0x404, bid) +#define CVMX_USBCX_HFNUM(bid) CVMX_USBCXREG1(0x408, bid) +#define CVMX_USBCX_HPRT(bid) CVMX_USBCXREG1(0x440, bid) +#define CVMX_USBCX_HPTXFSIZ(bid) CVMX_USBCXREG1(0x100, bid) +#define CVMX_USBCX_HPTXSTS(bid) CVMX_USBCXREG1(0x410, bid) + +#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull) +#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull) + +#define CVMX_USBNXREG1(reg, bid) \ + (CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid)) +#define CVMX_USBNXREG2(reg, bid) \ + (CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid)) + +#define CVMX_USBNX_CLK_CTL(bid) CVMX_USBNXREG1(0x10, bid) +#define CVMX_USBNX_DMA0_INB_CHN0(bid) CVMX_USBNXREG2(0x818, bid) +#define CVMX_USBNX_DMA0_OUTB_CHN0(bid) CVMX_USBNXREG2(0x858, bid) +#define CVMX_USBNX_USBP_CTL_STATUS(bid) CVMX_USBNXREG1(0x18, bid) + +/** + * cvmx_usbc#_gahbcfg + * + * Core AHB Configuration Register (GAHBCFG) + * + * This register can be used to configure the core after power-on or a change in + * mode of operation. This register mainly contains AHB system-related + * configuration parameters. The AHB is the processor interface to the O2P USB + * core. In general, software need not know about this interface except to + * program the values as specified. + * + * The application must program this register as part of the O2P USB core + * initialization. Do not change this register after the initial programming. + */ +union cvmx_usbcx_gahbcfg { + u32 u32; + /** + * struct cvmx_usbcx_gahbcfg_s + * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl) + * Software should set this bit to 0x1. + * Indicates when the Periodic TxFIFO Empty Interrupt bit in the + * Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This + * bit is used only in Slave mode. + * * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic + * TxFIFO is half empty + * * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic + * TxFIFO is completely empty + * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl) + * Software should set this bit to 0x1. + * Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in + * the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered. + * This bit is used only in Slave mode. + * * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non- + * Periodic TxFIFO is half empty + * * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non- + * Periodic TxFIFO is completely empty + * @dmaen: DMA Enable (DMAEn) + * * 1'b0: Core operates in Slave mode + * * 1'b1: Core operates in a DMA mode + * @hbstlen: Burst Length/Type (HBstLen) + * This field has not effect and should be left as 0x0. + * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk) + * Software should set this field to 0x1. + * The application uses this bit to mask or unmask the interrupt + * line assertion to itself. Irrespective of this bit's setting, + * the interrupt status registers are updated by the core. + * * 1'b0: Mask the interrupt assertion to the application. + * * 1'b1: Unmask the interrupt assertion to the application. + */ + struct cvmx_usbcx_gahbcfg_s { + __BITFIELD_FIELD(u32 reserved_9_31 : 23, + __BITFIELD_FIELD(u32 ptxfemplvl : 1, + __BITFIELD_FIELD(u32 nptxfemplvl : 1, + __BITFIELD_FIELD(u32 reserved_6_6 : 1, + __BITFIELD_FIELD(u32 dmaen : 1, + __BITFIELD_FIELD(u32 hbstlen : 4, + __BITFIELD_FIELD(u32 glblintrmsk : 1, + ;))))))) + } s; +}; + +/** + * cvmx_usbc#_ghwcfg3 + * + * User HW Config3 Register (GHWCFG3) + * + * This register contains the configuration options of the O2P USB core. + */ +union cvmx_usbcx_ghwcfg3 { + u32 u32; + /** + * struct cvmx_usbcx_ghwcfg3_s + * @dfifodepth: DFIFO Depth (DfifoDepth) + * This value is in terms of 32-bit words. + * * Minimum value is 32 + * * Maximum value is 32768 + * @ahbphysync: AHB and PHY Synchronous (AhbPhySync) + * Indicates whether AHB and PHY clocks are synchronous to + * each other. + * * 1'b0: No + * * 1'b1: Yes + * This bit is tied to 1. + * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType) + * * 1'b0: Asynchronous reset is used in the core + * * 1'b1: Synchronous reset is used in the core + * @optfeature: Optional Features Removed (OptFeature) + * Indicates whether the User ID register, GPIO interface ports, + * and SOF toggle and counter ports were removed for gate count + * optimization. + * @vendor_control_interface_support: Vendor Control Interface Support + * * 1'b0: Vendor Control Interface is not available on the core. + * * 1'b1: Vendor Control Interface is available. + * @i2c_selection: I2C Selection + * * 1'b0: I2C Interface is not available on the core. + * * 1'b1: I2C Interface is available on the core. + * @otgen: OTG Function Enabled (OtgEn) + * The application uses this bit to indicate the O2P USB core's + * OTG capabilities. + * * 1'b0: Not OTG capable + * * 1'b1: OTG Capable + * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth) + * * 3'b000: 4 bits + * * 3'b001: 5 bits + * * 3'b010: 6 bits + * * 3'b011: 7 bits + * * 3'b100: 8 bits + * * 3'b101: 9 bits + * * 3'b110: 10 bits + * * Others: Reserved + * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth) + * * 4'b0000: 11 bits + * * 4'b0001: 12 bits + * - ... + * * 4'b1000: 19 bits + * * Others: Reserved + */ + struct cvmx_usbcx_ghwcfg3_s { + __BITFIELD_FIELD(u32 dfifodepth : 16, + __BITFIELD_FIELD(u32 reserved_13_15 : 3, + __BITFIELD_FIELD(u32 ahbphysync : 1, + __BITFIELD_FIELD(u32 rsttype : 1, + __BITFIELD_FIELD(u32 optfeature : 1, + __BITFIELD_FIELD(u32 vendor_control_interface_support : 1, + __BITFIELD_FIELD(u32 i2c_selection : 1, + __BITFIELD_FIELD(u32 otgen : 1, + __BITFIELD_FIELD(u32 pktsizewidth : 3, + __BITFIELD_FIELD(u32 xfersizewidth : 4, + ;)))))))))) + } s; +}; + +/** + * cvmx_usbc#_gintmsk + * + * Core Interrupt Mask Register (GINTMSK) + * + * This register works with the Core Interrupt register to interrupt the + * application. When an interrupt bit is masked, the interrupt associated with + * that bit will not be generated. However, the Core Interrupt (GINTSTS) + * register bit corresponding to that interrupt will still be set. + * Mask interrupt: 1'b0, Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_gintmsk { + u32 u32; + /** + * struct cvmx_usbcx_gintmsk_s + * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask + * (WkUpIntMsk) + * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask + * (SessReqIntMsk) + * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk) + * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk) + * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk) + * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk) + * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk) + * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk) + * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk) + * Incomplete Isochronous OUT Transfer Mask + * (incompISOOUTMsk) + * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask + * (incompISOINMsk) + * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk) + * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk) + * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk) + * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk) + * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask + * (ISOOutDropMsk) + * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk) + * @usbrstmsk: USB Reset Mask (USBRstMsk) + * @usbsuspmsk: USB Suspend Mask (USBSuspMsk) + * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk) + * @i2cint: I2C Interrupt Mask (I2CINT) + * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk) + * I2C Carkit Interrupt Mask (I2CCKINTMsk) + * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk) + * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask + * (GINNakEffMsk) + * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk) + * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk) + * @sofmsk: Start of (micro)Frame Mask (SofMsk) + * @otgintmsk: OTG Interrupt Mask (OTGIntMsk) + * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk) + */ + struct cvmx_usbcx_gintmsk_s { + __BITFIELD_FIELD(u32 wkupintmsk : 1, + __BITFIELD_FIELD(u32 sessreqintmsk : 1, + __BITFIELD_FIELD(u32 disconnintmsk : 1, + __BITFIELD_FIELD(u32 conidstschngmsk : 1, + __BITFIELD_FIELD(u32 reserved_27_27 : 1, + __BITFIELD_FIELD(u32 ptxfempmsk : 1, + __BITFIELD_FIELD(u32 hchintmsk : 1, + __BITFIELD_FIELD(u32 prtintmsk : 1, + __BITFIELD_FIELD(u32 reserved_23_23 : 1, + __BITFIELD_FIELD(u32 fetsuspmsk : 1, + __BITFIELD_FIELD(u32 incomplpmsk : 1, + __BITFIELD_FIELD(u32 incompisoinmsk : 1, + __BITFIELD_FIELD(u32 oepintmsk : 1, + __BITFIELD_FIELD(u32 inepintmsk : 1, + __BITFIELD_FIELD(u32 epmismsk : 1, + __BITFIELD_FIELD(u32 reserved_16_16 : 1, + __BITFIELD_FIELD(u32 eopfmsk : 1, + __BITFIELD_FIELD(u32 isooutdropmsk : 1, + __BITFIELD_FIELD(u32 enumdonemsk : 1, + __BITFIELD_FIELD(u32 usbrstmsk : 1, + __BITFIELD_FIELD(u32 usbsuspmsk : 1, + __BITFIELD_FIELD(u32 erlysuspmsk : 1, + __BITFIELD_FIELD(u32 i2cint : 1, + __BITFIELD_FIELD(u32 ulpickintmsk : 1, + __BITFIELD_FIELD(u32 goutnakeffmsk : 1, + __BITFIELD_FIELD(u32 ginnakeffmsk : 1, + __BITFIELD_FIELD(u32 nptxfempmsk : 1, + __BITFIELD_FIELD(u32 rxflvlmsk : 1, + __BITFIELD_FIELD(u32 sofmsk : 1, + __BITFIELD_FIELD(u32 otgintmsk : 1, + __BITFIELD_FIELD(u32 modemismsk : 1, + __BITFIELD_FIELD(u32 reserved_0_0 : 1, + ;)))))))))))))))))))))))))))))))) + } s; +}; + +/** + * cvmx_usbc#_gintsts + * + * Core Interrupt Register (GINTSTS) + * + * This register interrupts the application for system-level events in the + * current mode of operation (Device mode or Host mode). It is shown in + * Interrupt. Some of the bits in this register are valid only in Host mode, + * while others are valid in Device mode only. This register also indicates the + * current mode of operation. In order to clear the interrupt status bits of + * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status + * interrupts are read only; once software reads from or writes to the FIFO + * while servicing these interrupts, FIFO interrupt conditions are cleared + * automatically. + */ +union cvmx_usbcx_gintsts { + u32 u32; + /** + * struct cvmx_usbcx_gintsts_s + * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt) + * In Device mode, this interrupt is asserted when a resume is + * detected on the USB. In Host mode, this interrupt is asserted + * when a remote wakeup is detected on the USB. + * For more information on how to use this interrupt, see "Partial + * Power-Down and Clock Gating Programming Model" on + * page 353. + * @sessreqint: Session Request/New Session Detected Interrupt + * (SessReqInt) + * In Host mode, this interrupt is asserted when a session request + * is detected from the device. In Device mode, this interrupt is + * asserted when the utmiotg_bvalid signal goes high. + * For more information on how to use this interrupt, see "Partial + * Power-Down and Clock Gating Programming Model" on + * page 353. + * @disconnint: Disconnect Detected Interrupt (DisconnInt) + * Asserted when a device disconnect is detected. + * @conidstschng: Connector ID Status Change (ConIDStsChng) + * The core sets this bit when there is a change in connector ID + * status. + * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp) + * Asserted when the Periodic Transmit FIFO is either half or + * completely empty and there is space for at least one entry to be + * written in the Periodic Request Queue. The half or completely + * empty status is determined by the Periodic TxFIFO Empty Level + * bit in the Core AHB Configuration register + * (GAHBCFG.PTxFEmpLvl). + * @hchint: Host Channels Interrupt (HChInt) + * The core sets this bit to indicate that an interrupt is pending + * on one of the channels of the core (in Host mode). The + * application must read the Host All Channels Interrupt (HAINT) + * register to determine the exact number of the channel on which + * the interrupt occurred, and then read the corresponding Host + * Channel-n Interrupt (HCINTn) register to determine the exact + * cause of the interrupt. The application must clear the + * appropriate status bit in the HCINTn register to clear this bit. + * @prtint: Host Port Interrupt (PrtInt) + * The core sets this bit to indicate a change in port status of + * one of the O2P USB core ports in Host mode. The application must + * read the Host Port Control and Status (HPRT) register to + * determine the exact event that caused this interrupt. The + * application must clear the appropriate status bit in the Host + * Port Control and Status register to clear this bit. + * @fetsusp: Data Fetch Suspended (FetSusp) + * This interrupt is valid only in DMA mode. This interrupt + * indicates that the core has stopped fetching data for IN + * endpoints due to the unavailability of TxFIFO space or Request + * Queue space. This interrupt is used by the application for an + * endpoint mismatch algorithm. + * @incomplp: Incomplete Periodic Transfer (incomplP) + * In Host mode, the core sets this interrupt bit when there are + * incomplete periodic transactions still pending which are + * scheduled for the current microframe. + * Incomplete Isochronous OUT Transfer (incompISOOUT) + * The Device mode, the core sets this interrupt to indicate that + * there is at least one isochronous OUT endpoint on which the + * transfer is not completed in the current microframe. This + * interrupt is asserted along with the End of Periodic Frame + * Interrupt (EOPF) bit in this register. + * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN) + * The core sets this interrupt to indicate that there is at least + * one isochronous IN endpoint on which the transfer is not + * completed in the current microframe. This interrupt is asserted + * along with the End of Periodic Frame Interrupt (EOPF) bit in + * this register. + * @oepint: OUT Endpoints Interrupt (OEPInt) + * The core sets this bit to indicate that an interrupt is pending + * on one of the OUT endpoints of the core (in Device mode). The + * application must read the Device All Endpoints Interrupt + * (DAINT) register to determine the exact number of the OUT + * endpoint on which the interrupt occurred, and then read the + * corresponding Device OUT Endpoint-n Interrupt (DOEPINTn) + * register to determine the exact cause of the interrupt. The + * application must clear the appropriate status bit in the + * corresponding DOEPINTn register to clear this bit. + * @iepint: IN Endpoints Interrupt (IEPInt) + * The core sets this bit to indicate that an interrupt is pending + * on one of the IN endpoints of the core (in Device mode). The + * application must read the Device All Endpoints Interrupt + * (DAINT) register to determine the exact number of the IN + * endpoint on which the interrupt occurred, and then read the + * corresponding Device IN Endpoint-n Interrupt (DIEPINTn) + * register to determine the exact cause of the interrupt. The + * application must clear the appropriate status bit in the + * corresponding DIEPINTn register to clear this bit. + * @epmis: Endpoint Mismatch Interrupt (EPMis) + * Indicates that an IN token has been received for a non-periodic + * endpoint, but the data for another endpoint is present in the + * top of the Non-Periodic Transmit FIFO and the IN endpoint + * mismatch count programmed by the application has expired. + * @eopf: End of Periodic Frame Interrupt (EOPF) + * Indicates that the period specified in the Periodic Frame + * Interval field of the Device Configuration register + * (DCFG.PerFrInt) has been reached in the current microframe. + * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop) + * The core sets this bit when it fails to write an isochronous OUT + * packet into the RxFIFO because the RxFIFO doesn't have + * enough space to accommodate a maximum packet size packet + * for the isochronous OUT endpoint. + * @enumdone: Enumeration Done (EnumDone) + * The core sets this bit to indicate that speed enumeration is + * complete. The application must read the Device Status (DSTS) + * register to obtain the enumerated speed. + * @usbrst: USB Reset (USBRst) + * The core sets this bit to indicate that a reset is detected on + * the USB. + * @usbsusp: USB Suspend (USBSusp) + * The core sets this bit to indicate that a suspend was detected + * on the USB. The core enters the Suspended state when there + * is no activity on the phy_line_state_i signal for an extended + * period of time. + * @erlysusp: Early Suspend (ErlySusp) + * The core sets this bit to indicate that an Idle state has been + * detected on the USB for 3 ms. + * @i2cint: I2C Interrupt (I2CINT) + * This bit is always 0x0. + * @ulpickint: ULPI Carkit Interrupt (ULPICKINT) + * This bit is always 0x0. + * @goutnakeff: Global OUT NAK Effective (GOUTNakEff) + * Indicates that the Set Global OUT NAK bit in the Device Control + * register (DCTL.SGOUTNak), set by the application, has taken + * effect in the core. This bit can be cleared by writing the Clear + * Global OUT NAK bit in the Device Control register + * (DCTL.CGOUTNak). + * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff) + * Indicates that the Set Global Non-Periodic IN NAK bit in the + * Device Control register (DCTL.SGNPInNak), set by the + * application, has taken effect in the core. That is, the core has + * sampled the Global IN NAK bit set by the application. This bit + * can be cleared by clearing the Clear Global Non-Periodic IN + * NAK bit in the Device Control register (DCTL.CGNPInNak). + * This interrupt does not necessarily mean that a NAK handshake + * is sent out on the USB. The STALL bit takes precedence over + * the NAK bit. + * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp) + * This interrupt is asserted when the Non-Periodic TxFIFO is + * either half or completely empty, and there is space for at least + * one entry to be written to the Non-Periodic Transmit Request + * Queue. The half or completely empty status is determined by + * the Non-Periodic TxFIFO Empty Level bit in the Core AHB + * Configuration register (GAHBCFG.NPTxFEmpLvl). + * @rxflvl: RxFIFO Non-Empty (RxFLvl) + * Indicates that there is at least one packet pending to be read + * from the RxFIFO. + * @sof: Start of (micro)Frame (Sof) + * In Host mode, the core sets this bit to indicate that an SOF + * (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the + * USB. The application must write a 1 to this bit to clear the + * interrupt. + * In Device mode, in the core sets this bit to indicate that an + * SOF token has been received on the USB. The application can read + * the Device Status register to get the current (micro)frame + * number. This interrupt is seen only when the core is operating + * at either HS or FS. + * @otgint: OTG Interrupt (OTGInt) + * The core sets this bit to indicate an OTG protocol event. The + * application must read the OTG Interrupt Status (GOTGINT) + * register to determine the exact event that caused this + * interrupt. The application must clear the appropriate status bit + * in the GOTGINT register to clear this bit. + * @modemis: Mode Mismatch Interrupt (ModeMis) + * The core sets this bit when the application is trying to access: + * * A Host mode register, when the core is operating in Device + * mode + * * A Device mode register, when the core is operating in Host + * mode + * The register access is completed on the AHB with an OKAY + * response, but is ignored by the core internally and doesn't + * affect the operation of the core. + * @curmod: Current Mode of Operation (CurMod) + * Indicates the current mode of operation. + * * 1'b0: Device mode + * * 1'b1: Host mode + */ + struct cvmx_usbcx_gintsts_s { + __BITFIELD_FIELD(u32 wkupint : 1, + __BITFIELD_FIELD(u32 sessreqint : 1, + __BITFIELD_FIELD(u32 disconnint : 1, + __BITFIELD_FIELD(u32 conidstschng : 1, + __BITFIELD_FIELD(u32 reserved_27_27 : 1, + __BITFIELD_FIELD(u32 ptxfemp : 1, + __BITFIELD_FIELD(u32 hchint : 1, + __BITFIELD_FIELD(u32 prtint : 1, + __BITFIELD_FIELD(u32 reserved_23_23 : 1, + __BITFIELD_FIELD(u32 fetsusp : 1, + __BITFIELD_FIELD(u32 incomplp : 1, + __BITFIELD_FIELD(u32 incompisoin : 1, + __BITFIELD_FIELD(u32 oepint : 1, + __BITFIELD_FIELD(u32 iepint : 1, + __BITFIELD_FIELD(u32 epmis : 1, + __BITFIELD_FIELD(u32 reserved_16_16 : 1, + __BITFIELD_FIELD(u32 eopf : 1, + __BITFIELD_FIELD(u32 isooutdrop : 1, + __BITFIELD_FIELD(u32 enumdone : 1, + __BITFIELD_FIELD(u32 usbrst : 1, + __BITFIELD_FIELD(u32 usbsusp : 1, + __BITFIELD_FIELD(u32 erlysusp : 1, + __BITFIELD_FIELD(u32 i2cint : 1, + __BITFIELD_FIELD(u32 ulpickint : 1, + __BITFIELD_FIELD(u32 goutnakeff : 1, + __BITFIELD_FIELD(u32 ginnakeff : 1, + __BITFIELD_FIELD(u32 nptxfemp : 1, + __BITFIELD_FIELD(u32 rxflvl : 1, + __BITFIELD_FIELD(u32 sof : 1, + __BITFIELD_FIELD(u32 otgint : 1, + __BITFIELD_FIELD(u32 modemis : 1, + __BITFIELD_FIELD(u32 curmod : 1, + ;)))))))))))))))))))))))))))))))) + } s; +}; + +/** + * cvmx_usbc#_gnptxfsiz + * + * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ) + * + * The application can program the RAM size and the memory start address for the + * Non-Periodic TxFIFO. + */ +union cvmx_usbcx_gnptxfsiz { + u32 u32; + /** + * struct cvmx_usbcx_gnptxfsiz_s + * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep) + * This value is in terms of 32-bit words. + * Minimum value is 16 + * Maximum value is 32768 + * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr) + * This field contains the memory start address for Non-Periodic + * Transmit FIFO RAM. + */ + struct cvmx_usbcx_gnptxfsiz_s { + __BITFIELD_FIELD(u32 nptxfdep : 16, + __BITFIELD_FIELD(u32 nptxfstaddr : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_gnptxsts + * + * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS) + * + * This read-only register contains the free space information for the + * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue. + */ +union cvmx_usbcx_gnptxsts { + u32 u32; + /** + * struct cvmx_usbcx_gnptxsts_s + * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop) + * Entry in the Non-Periodic Tx Request Queue that is currently + * being processed by the MAC. + * * Bits [30:27]: Channel/endpoint number + * * Bits [26:25]: + * - 2'b00: IN/OUT token + * - 2'b01: Zero-length transmit packet (device IN/host OUT) + * - 2'b10: PING/CSPLIT token + * - 2'b11: Channel halt command + * * Bit [24]: Terminate (last entry for selected channel/endpoint) + * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available + * (NPTxQSpcAvail) + * Indicates the amount of free space available in the Non- + * Periodic Transmit Request Queue. This queue holds both IN + * and OUT requests in Host mode. Device mode has only IN + * requests. + * * 8'h0: Non-Periodic Transmit Request Queue is full + * * 8'h1: 1 location available + * * 8'h2: 2 locations available + * * n: n locations available (0..8) + * * Others: Reserved + * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail) + * Indicates the amount of free space available in the Non- + * Periodic TxFIFO. + * Values are in terms of 32-bit words. + * * 16'h0: Non-Periodic TxFIFO is full + * * 16'h1: 1 word available + * * 16'h2: 2 words available + * * 16'hn: n words available (where 0..32768) + * * 16'h8000: 32768 words available + * * Others: Reserved + */ + struct cvmx_usbcx_gnptxsts_s { + __BITFIELD_FIELD(u32 reserved_31_31 : 1, + __BITFIELD_FIELD(u32 nptxqtop : 7, + __BITFIELD_FIELD(u32 nptxqspcavail : 8, + __BITFIELD_FIELD(u32 nptxfspcavail : 16, + ;)))) + } s; +}; + +/** + * cvmx_usbc#_grstctl + * + * Core Reset Register (GRSTCTL) + * + * The application uses this register to reset various hardware features inside + * the core. + */ +union cvmx_usbcx_grstctl { + u32 u32; + /** + * struct cvmx_usbcx_grstctl_s + * @ahbidle: AHB Master Idle (AHBIdle) + * Indicates that the AHB Master State Machine is in the IDLE + * condition. + * @dmareq: DMA Request Signal (DMAReq) + * Indicates that the DMA request is in progress. Used for debug. + * @txfnum: TxFIFO Number (TxFNum) + * This is the FIFO number that must be flushed using the TxFIFO + * Flush bit. This field must not be changed until the core clears + * the TxFIFO Flush bit. + * * 5'h0: Non-Periodic TxFIFO flush + * * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic + * TxFIFO flush in Host mode + * * 5'h2: Periodic TxFIFO 2 flush in Device mode + * - ... + * * 5'hF: Periodic TxFIFO 15 flush in Device mode + * * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the + * core + * @txfflsh: TxFIFO Flush (TxFFlsh) + * This bit selectively flushes a single or all transmit FIFOs, but + * cannot do so if the core is in the midst of a transaction. + * The application must only write this bit after checking that the + * core is neither writing to the TxFIFO nor reading from the + * TxFIFO. + * The application must wait until the core clears this bit before + * performing any operations. This bit takes 8 clocks (of phy_clk + * or hclk, whichever is slower) to clear. + * @rxfflsh: RxFIFO Flush (RxFFlsh) + * The application can flush the entire RxFIFO using this bit, but + * must first ensure that the core is not in the middle of a + * transaction. + * The application must only write to this bit after checking that + * the core is neither reading from the RxFIFO nor writing to the + * RxFIFO. + * The application must wait until the bit is cleared before + * performing any other operations. This bit will take 8 clocks + * (slowest of PHY or AHB clock) to clear. + * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh) + * The application writes this bit to flush the IN Token Sequence + * Learning Queue. + * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst) + * The application writes this bit to reset the (micro)frame number + * counter inside the core. When the (micro)frame counter is reset, + * the subsequent SOF sent out by the core will have a + * (micro)frame number of 0. + * @hsftrst: HClk Soft Reset (HSftRst) + * The application uses this bit to flush the control logic in the + * AHB Clock domain. Only AHB Clock Domain pipelines are reset. + * * FIFOs are not flushed with this bit. + * * All state machines in the AHB clock domain are reset to the + * Idle state after terminating the transactions on the AHB, + * following the protocol. + * * CSR control bits used by the AHB clock domain state + * machines are cleared. + * * To clear this interrupt, status mask bits that control the + * interrupt status and are generated by the AHB clock domain + * state machine are cleared. + * * Because interrupt status bits are not cleared, the application + * can get the status of any core events that occurred after it set + * this bit. + * This is a self-clearing bit that the core clears after all + * necessary logic is reset in the core. This may take several + * clocks, depending on the core's current state. + * @csftrst: Core Soft Reset (CSftRst) + * Resets the hclk and phy_clock domains as follows: + * * Clears the interrupts and all the CSR registers except the + * following register bits: + * - PCGCCTL.RstPdwnModule + * - PCGCCTL.GateHclk + * - PCGCCTL.PwrClmp + * - PCGCCTL.StopPPhyLPwrClkSelclk + * - GUSBCFG.PhyLPwrClkSel + * - GUSBCFG.DDRSel + * - GUSBCFG.PHYSel + * - GUSBCFG.FSIntf + * - GUSBCFG.ULPI_UTMI_Sel + * - GUSBCFG.PHYIf + * - HCFG.FSLSPclkSel + * - DCFG.DevSpd + * * All module state machines (except the AHB Slave Unit) are + * reset to the IDLE state, and all the transmit FIFOs and the + * receive FIFO are flushed. + * * Any transactions on the AHB Master are terminated as soon + * as possible, after gracefully completing the last data phase of + * an AHB transfer. Any transactions on the USB are terminated + * immediately. + * The application can write to this bit any time it wants to reset + * the core. This is a self-clearing bit and the core clears this + * bit after all the necessary logic is reset in the core, which + * may take several clocks, depending on the current state of the + * core. Once this bit is cleared software should wait at least 3 + * PHY clocks before doing any access to the PHY domain + * (synchronization delay). Software should also should check that + * bit 31 of this register is 1 (AHB Master is IDLE) before + * starting any operation. + * Typically software reset is used during software development + * and also when you dynamically change the PHY selection bits + * in the USB configuration registers listed above. When you + * change the PHY, the corresponding clock for the PHY is + * selected and used in the PHY domain. Once a new clock is + * selected, the PHY domain has to be reset for proper operation. + */ + struct cvmx_usbcx_grstctl_s { + __BITFIELD_FIELD(u32 ahbidle : 1, + __BITFIELD_FIELD(u32 dmareq : 1, + __BITFIELD_FIELD(u32 reserved_11_29 : 19, + __BITFIELD_FIELD(u32 txfnum : 5, + __BITFIELD_FIELD(u32 txfflsh : 1, + __BITFIELD_FIELD(u32 rxfflsh : 1, + __BITFIELD_FIELD(u32 intknqflsh : 1, + __BITFIELD_FIELD(u32 frmcntrrst : 1, + __BITFIELD_FIELD(u32 hsftrst : 1, + __BITFIELD_FIELD(u32 csftrst : 1, + ;)))))))))) + } s; +}; + +/** + * cvmx_usbc#_grxfsiz + * + * Receive FIFO Size Register (GRXFSIZ) + * + * The application can program the RAM size that must be allocated to the + * RxFIFO. + */ +union cvmx_usbcx_grxfsiz { + u32 u32; + /** + * struct cvmx_usbcx_grxfsiz_s + * @rxfdep: RxFIFO Depth (RxFDep) + * This value is in terms of 32-bit words. + * * Minimum value is 16 + * * Maximum value is 32768 + */ + struct cvmx_usbcx_grxfsiz_s { + __BITFIELD_FIELD(u32 reserved_16_31 : 16, + __BITFIELD_FIELD(u32 rxfdep : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_grxstsph + * + * Receive Status Read and Pop Register, Host Mode (GRXSTSPH) + * + * A read to the Receive Status Read and Pop register returns and additionally + * pops the top data entry out of the RxFIFO. + * This Description is only valid when the core is in Host Mode. For Device Mode + * use USBC_GRXSTSPD instead. + * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the + * same offset in the O2P USB core. The offset difference shown in this + * document is for software clarity and is actually ignored by the + * hardware. + */ +union cvmx_usbcx_grxstsph { + u32 u32; + /** + * struct cvmx_usbcx_grxstsph_s + * @pktsts: Packet Status (PktSts) + * Indicates the status of the received packet + * * 4'b0010: IN data packet received + * * 4'b0011: IN transfer completed (triggers an interrupt) + * * 4'b0101: Data toggle error (triggers an interrupt) + * * 4'b0111: Channel halted (triggers an interrupt) + * * Others: Reserved + * @dpid: Data PID (DPID) + * * 2'b00: DATA0 + * * 2'b10: DATA1 + * * 2'b01: DATA2 + * * 2'b11: MDATA + * @bcnt: Byte Count (BCnt) + * Indicates the byte count of the received IN data packet + * @chnum: Channel Number (ChNum) + * Indicates the channel number to which the current received + * packet belongs. + */ + struct cvmx_usbcx_grxstsph_s { + __BITFIELD_FIELD(u32 reserved_21_31 : 11, + __BITFIELD_FIELD(u32 pktsts : 4, + __BITFIELD_FIELD(u32 dpid : 2, + __BITFIELD_FIELD(u32 bcnt : 11, + __BITFIELD_FIELD(u32 chnum : 4, + ;))))) + } s; +}; + +/** + * cvmx_usbc#_gusbcfg + * + * Core USB Configuration Register (GUSBCFG) + * + * This register can be used to configure the core after power-on or a changing + * to Host mode or Device mode. It contains USB and USB-PHY related + * configuration parameters. The application must program this register before + * starting any transactions on either the AHB or the USB. Do not make changes + * to this register after the initial programming. + */ +union cvmx_usbcx_gusbcfg { + u32 u32; + /** + * struct cvmx_usbcx_gusbcfg_s + * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel) + * This bit is always 0x0. + * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel) + * Software should set this bit to 0x0. + * Selects either 480-MHz or 48-MHz (low-power) PHY mode. In + * FS and LS modes, the PHY can usually operate on a 48-MHz + * clock to save power. + * * 1'b0: 480-MHz Internal PLL clock + * * 1'b1: 48-MHz External Clock + * In 480 MHz mode, the UTMI interface operates at either 60 or + * 30-MHz, depending upon whether 8- or 16-bit data width is + * selected. In 48-MHz mode, the UTMI interface operates at 48 + * MHz in FS mode and at either 48 or 6 MHz in LS mode + * (depending on the PHY vendor). + * This bit drives the utmi_fsls_low_power core output signal, and + * is valid only for UTMI+ PHYs. + * @usbtrdtim: USB Turnaround Time (USBTrdTim) + * Sets the turnaround time in PHY clocks. + * Specifies the response time for a MAC request to the Packet + * FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). + * This must be programmed to 0x5. + * @hnpcap: HNP-Capable (HNPCap) + * This bit is always 0x0. + * @srpcap: SRP-Capable (SRPCap) + * This bit is always 0x0. + * @ddrsel: ULPI DDR Select (DDRSel) + * Software should set this bit to 0x0. + * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial + * Software should set this bit to 0x0. + * @fsintf: Full-Speed Serial Interface Select (FSIntf) + * Software should set this bit to 0x0. + * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel) + * This bit is always 0x0. + * @phyif: PHY Interface (PHYIf) + * This bit is always 0x1. + * @toutcal: HS/FS Timeout Calibration (TOutCal) + * The number of PHY clocks that the application programs in this + * field is added to the high-speed/full-speed interpacket timeout + * duration in the core to account for any additional delays + * introduced by the PHY. This may be required, since the delay + * introduced by the PHY in generating the linestate condition may + * vary from one PHY to another. + * The USB standard timeout value for high-speed operation is + * 736 to 816 (inclusive) bit times. The USB standard timeout + * value for full-speed operation is 16 to 18 (inclusive) bit + * times. The application must program this field based on the + * speed of enumeration. The number of bit times added per PHY + * clock are: + * High-speed operation: + * * One 30-MHz PHY clock = 16 bit times + * * One 60-MHz PHY clock = 8 bit times + * Full-speed operation: + * * One 30-MHz PHY clock = 0.4 bit times + * * One 60-MHz PHY clock = 0.2 bit times + * * One 48-MHz PHY clock = 0.25 bit times + */ + struct cvmx_usbcx_gusbcfg_s { + __BITFIELD_FIELD(u32 reserved_17_31 : 15, + __BITFIELD_FIELD(u32 otgi2csel : 1, + __BITFIELD_FIELD(u32 phylpwrclksel : 1, + __BITFIELD_FIELD(u32 reserved_14_14 : 1, + __BITFIELD_FIELD(u32 usbtrdtim : 4, + __BITFIELD_FIELD(u32 hnpcap : 1, + __BITFIELD_FIELD(u32 srpcap : 1, + __BITFIELD_FIELD(u32 ddrsel : 1, + __BITFIELD_FIELD(u32 physel : 1, + __BITFIELD_FIELD(u32 fsintf : 1, + __BITFIELD_FIELD(u32 ulpi_utmi_sel : 1, + __BITFIELD_FIELD(u32 phyif : 1, + __BITFIELD_FIELD(u32 toutcal : 3, + ;))))))))))))) + } s; +}; + +/** + * cvmx_usbc#_haint + * + * Host All Channels Interrupt Register (HAINT) + * + * When a significant event occurs on a channel, the Host All Channels Interrupt + * register interrupts the application using the Host Channels Interrupt bit of + * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt. + * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in + * this register are set and cleared when the application sets and clears bits + * in the corresponding Host Channel-n Interrupt register. + */ +union cvmx_usbcx_haint { + u32 u32; + /** + * struct cvmx_usbcx_haint_s + * @haint: Channel Interrupts (HAINT) + * One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15 + */ + struct cvmx_usbcx_haint_s { + __BITFIELD_FIELD(u32 reserved_16_31 : 16, + __BITFIELD_FIELD(u32 haint : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_haintmsk + * + * Host All Channels Interrupt Mask Register (HAINTMSK) + * + * The Host All Channel Interrupt Mask register works with the Host All Channel + * Interrupt register to interrupt the application when an event occurs on a + * channel. There is one interrupt mask bit per channel, up to a maximum of 16 + * bits. + * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_haintmsk { + u32 u32; + /** + * struct cvmx_usbcx_haintmsk_s + * @haintmsk: Channel Interrupt Mask (HAINTMsk) + * One bit per channel: Bit 0 for channel 0, bit 15 for channel 15 + */ + struct cvmx_usbcx_haintmsk_s { + __BITFIELD_FIELD(u32 reserved_16_31 : 16, + __BITFIELD_FIELD(u32 haintmsk : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_hcchar# + * + * Host Channel-n Characteristics Register (HCCHAR) + * + */ +union cvmx_usbcx_hccharx { + u32 u32; + /** + * struct cvmx_usbcx_hccharx_s + * @chena: Channel Enable (ChEna) + * This field is set by the application and cleared by the OTG + * host. + * * 1'b0: Channel disabled + * * 1'b1: Channel enabled + * @chdis: Channel Disable (ChDis) + * The application sets this bit to stop transmitting/receiving + * data on a channel, even before the transfer for that channel is + * complete. The application must wait for the Channel Disabled + * interrupt before treating the channel as disabled. + * @oddfrm: Odd Frame (OddFrm) + * This field is set (reset) by the application to indicate that + * the OTG host must perform a transfer in an odd (micro)frame. + * This field is applicable for only periodic (isochronous and + * interrupt) transactions. + * * 1'b0: Even (micro)frame + * * 1'b1: Odd (micro)frame + * @devaddr: Device Address (DevAddr) + * This field selects the specific device serving as the data + * source or sink. + * @ec: Multi Count (MC) / Error Count (EC) + * When the Split Enable bit of the Host Channel-n Split Control + * register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates + * to the host the number of transactions that should be executed + * per microframe for this endpoint. + * * 2'b00: Reserved. This field yields undefined results. + * * 2'b01: 1 transaction + * * 2'b10: 2 transactions to be issued for this endpoint per + * microframe + * * 2'b11: 3 transactions to be issued for this endpoint per + * microframe + * When HCSPLTn.SpltEna is set (1'b1), this field indicates the + * number of immediate retries to be performed for a periodic split + * transactions on transaction errors. This field must be set to at + * least 2'b01. + * @eptype: Endpoint Type (EPType) + * Indicates the transfer type selected. + * * 2'b00: Control + * * 2'b01: Isochronous + * * 2'b10: Bulk + * * 2'b11: Interrupt + * @lspddev: Low-Speed Device (LSpdDev) + * This field is set by the application to indicate that this + * channel is communicating to a low-speed device. + * @epdir: Endpoint Direction (EPDir) + * Indicates whether the transaction is IN or OUT. + * * 1'b0: OUT + * * 1'b1: IN + * @epnum: Endpoint Number (EPNum) + * Indicates the endpoint number on the device serving as the + * data source or sink. + * @mps: Maximum Packet Size (MPS) + * Indicates the maximum packet size of the associated endpoint. + */ + struct cvmx_usbcx_hccharx_s { + __BITFIELD_FIELD(u32 chena : 1, + __BITFIELD_FIELD(u32 chdis : 1, + __BITFIELD_FIELD(u32 oddfrm : 1, + __BITFIELD_FIELD(u32 devaddr : 7, + __BITFIELD_FIELD(u32 ec : 2, + __BITFIELD_FIELD(u32 eptype : 2, + __BITFIELD_FIELD(u32 lspddev : 1, + __BITFIELD_FIELD(u32 reserved_16_16 : 1, + __BITFIELD_FIELD(u32 epdir : 1, + __BITFIELD_FIELD(u32 epnum : 4, + __BITFIELD_FIELD(u32 mps : 11, + ;))))))))))) + } s; +}; + +/** + * cvmx_usbc#_hcfg + * + * Host Configuration Register (HCFG) + * + * This register configures the core after power-on. Do not make changes to this + * register after initializing the host. + */ +union cvmx_usbcx_hcfg { + u32 u32; + /** + * struct cvmx_usbcx_hcfg_s + * @fslssupp: FS- and LS-Only Support (FSLSSupp) + * The application uses this bit to control the core's enumeration + * speed. Using this bit, the application can make the core + * enumerate as a FS host, even if the connected device supports + * HS traffic. Do not make changes to this field after initial + * programming. + * * 1'b0: HS/FS/LS, based on the maximum speed supported by + * the connected device + * * 1'b1: FS/LS-only, even if the connected device can support HS + * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel) + * When the core is in FS Host mode + * * 2'b00: PHY clock is running at 30/60 MHz + * * 2'b01: PHY clock is running at 48 MHz + * * Others: Reserved + * When the core is in LS Host mode + * * 2'b00: PHY clock is running at 30/60 MHz. When the + * UTMI+/ULPI PHY Low Power mode is not selected, use + * 30/60 MHz. + * * 2'b01: PHY clock is running at 48 MHz. When the UTMI+ + * PHY Low Power mode is selected, use 48MHz if the PHY + * supplies a 48 MHz clock during LS mode. + * * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode, + * use 6 MHz when the UTMI+ PHY Low Power mode is + * selected and the PHY supplies a 6 MHz clock during LS + * mode. If you select a 6 MHz clock during LS mode, you must + * do a soft reset. + * * 2'b11: Reserved + */ + struct cvmx_usbcx_hcfg_s { + __BITFIELD_FIELD(u32 reserved_3_31 : 29, + __BITFIELD_FIELD(u32 fslssupp : 1, + __BITFIELD_FIELD(u32 fslspclksel : 2, + ;))) + } s; +}; + +/** + * cvmx_usbc#_hcint# + * + * Host Channel-n Interrupt Register (HCINT) + * + * This register indicates the status of a channel with respect to USB- and + * AHB-related events. The application must read this register when the Host + * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is + * set. Before the application can read this register, it must first read + * the Host All Channels Interrupt (HAINT) register to get the exact channel + * number for the Host Channel-n Interrupt register. The application must clear + * the appropriate bit in this register to clear the corresponding bits in the + * HAINT and GINTSTS registers. + */ +union cvmx_usbcx_hcintx { + u32 u32; + /** + * struct cvmx_usbcx_hcintx_s + * @datatglerr: Data Toggle Error (DataTglErr) + * @frmovrun: Frame Overrun (FrmOvrun) + * @bblerr: Babble Error (BblErr) + * @xacterr: Transaction Error (XactErr) + * @nyet: NYET Response Received Interrupt (NYET) + * @ack: ACK Response Received Interrupt (ACK) + * @nak: NAK Response Received Interrupt (NAK) + * @stall: STALL Response Received Interrupt (STALL) + * @ahberr: This bit is always 0x0. + * @chhltd: Channel Halted (ChHltd) + * Indicates the transfer completed abnormally either because of + * any USB transaction error or in response to disable request by + * the application. + * @xfercompl: Transfer Completed (XferCompl) + * Transfer completed normally without any errors. + */ + struct cvmx_usbcx_hcintx_s { + __BITFIELD_FIELD(u32 reserved_11_31 : 21, + __BITFIELD_FIELD(u32 datatglerr : 1, + __BITFIELD_FIELD(u32 frmovrun : 1, + __BITFIELD_FIELD(u32 bblerr : 1, + __BITFIELD_FIELD(u32 xacterr : 1, + __BITFIELD_FIELD(u32 nyet : 1, + __BITFIELD_FIELD(u32 ack : 1, + __BITFIELD_FIELD(u32 nak : 1, + __BITFIELD_FIELD(u32 stall : 1, + __BITFIELD_FIELD(u32 ahberr : 1, + __BITFIELD_FIELD(u32 chhltd : 1, + __BITFIELD_FIELD(u32 xfercompl : 1, + ;)))))))))))) + } s; +}; + +/** + * cvmx_usbc#_hcintmsk# + * + * Host Channel-n Interrupt Mask Register (HCINTMSKn) + * + * This register reflects the mask for each channel status described in the + * previous section. + * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_hcintmskx { + u32 u32; + /** + * struct cvmx_usbcx_hcintmskx_s + * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk) + * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk) + * @bblerrmsk: Babble Error Mask (BblErrMsk) + * @xacterrmsk: Transaction Error Mask (XactErrMsk) + * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk) + * @ackmsk: ACK Response Received Interrupt Mask (AckMsk) + * @nakmsk: NAK Response Received Interrupt Mask (NakMsk) + * @stallmsk: STALL Response Received Interrupt Mask (StallMsk) + * @ahberrmsk: AHB Error Mask (AHBErrMsk) + * @chhltdmsk: Channel Halted Mask (ChHltdMsk) + * @xfercomplmsk: Transfer Completed Mask (XferComplMsk) + */ + struct cvmx_usbcx_hcintmskx_s { + __BITFIELD_FIELD(u32 reserved_11_31 : 21, + __BITFIELD_FIELD(u32 datatglerrmsk : 1, + __BITFIELD_FIELD(u32 frmovrunmsk : 1, + __BITFIELD_FIELD(u32 bblerrmsk : 1, + __BITFIELD_FIELD(u32 xacterrmsk : 1, + __BITFIELD_FIELD(u32 nyetmsk : 1, + __BITFIELD_FIELD(u32 ackmsk : 1, + __BITFIELD_FIELD(u32 nakmsk : 1, + __BITFIELD_FIELD(u32 stallmsk : 1, + __BITFIELD_FIELD(u32 ahberrmsk : 1, + __BITFIELD_FIELD(u32 chhltdmsk : 1, + __BITFIELD_FIELD(u32 xfercomplmsk : 1, + ;)))))))))))) + } s; +}; + +/** + * cvmx_usbc#_hcsplt# + * + * Host Channel-n Split Control Register (HCSPLT) + * + */ +union cvmx_usbcx_hcspltx { + u32 u32; + /** + * struct cvmx_usbcx_hcspltx_s + * @spltena: Split Enable (SpltEna) + * The application sets this field to indicate that this channel is + * enabled to perform split transactions. + * @compsplt: Do Complete Split (CompSplt) + * The application sets this field to request the OTG host to + * perform a complete split transaction. + * @xactpos: Transaction Position (XactPos) + * This field is used to determine whether to send all, first, + * middle, or last payloads with each OUT transaction. + * * 2'b11: All. This is the entire data payload is of this + * transaction (which is less than or equal to 188 bytes). + * * 2'b10: Begin. This is the first data payload of this + * transaction (which is larger than 188 bytes). + * * 2'b00: Mid. This is the middle payload of this transaction + * (which is larger than 188 bytes). + * * 2'b01: End. This is the last payload of this transaction + * (which is larger than 188 bytes). + * @hubaddr: Hub Address (HubAddr) + * This field holds the device address of the transaction + * translator's hub. + * @prtaddr: Port Address (PrtAddr) + * This field is the port number of the recipient transaction + * translator. + */ + struct cvmx_usbcx_hcspltx_s { + __BITFIELD_FIELD(u32 spltena : 1, + __BITFIELD_FIELD(u32 reserved_17_30 : 14, + __BITFIELD_FIELD(u32 compsplt : 1, + __BITFIELD_FIELD(u32 xactpos : 2, + __BITFIELD_FIELD(u32 hubaddr : 7, + __BITFIELD_FIELD(u32 prtaddr : 7, + ;)))))) + } s; +}; + +/** + * cvmx_usbc#_hctsiz# + * + * Host Channel-n Transfer Size Register (HCTSIZ) + * + */ +union cvmx_usbcx_hctsizx { + u32 u32; + /** + * struct cvmx_usbcx_hctsizx_s + * @dopng: Do Ping (DoPng) + * Setting this field to 1 directs the host to do PING protocol. + * @pid: PID (Pid) + * The application programs this field with the type of PID to use + * for the initial transaction. The host will maintain this field + * for the rest of the transfer. + * * 2'b00: DATA0 + * * 2'b01: DATA2 + * * 2'b10: DATA1 + * * 2'b11: MDATA (non-control)/SETUP (control) + * @pktcnt: Packet Count (PktCnt) + * This field is programmed by the application with the expected + * number of packets to be transmitted (OUT) or received (IN). + * The host decrements this count on every successful + * transmission or reception of an OUT/IN packet. Once this count + * reaches zero, the application is interrupted to indicate normal + * completion. + * @xfersize: Transfer Size (XferSize) + * For an OUT, this field is the number of data bytes the host will + * send during the transfer. + * For an IN, this field is the buffer size that the application + * has reserved for the transfer. The application is expected to + * program this field as an integer multiple of the maximum packet + * size for IN transactions (periodic and non-periodic). + */ + struct cvmx_usbcx_hctsizx_s { + __BITFIELD_FIELD(u32 dopng : 1, + __BITFIELD_FIELD(u32 pid : 2, + __BITFIELD_FIELD(u32 pktcnt : 10, + __BITFIELD_FIELD(u32 xfersize : 19, + ;)))) + } s; +}; + +/** + * cvmx_usbc#_hfir + * + * Host Frame Interval Register (HFIR) + * + * This register stores the frame interval information for the current speed to + * which the O2P USB core has enumerated. + */ +union cvmx_usbcx_hfir { + u32 u32; + /** + * struct cvmx_usbcx_hfir_s + * @frint: Frame Interval (FrInt) + * The value that the application programs to this field specifies + * the interval between two consecutive SOFs (FS) or micro- + * SOFs (HS) or Keep-Alive tokens (HS). This field contains the + * number of PHY clocks that constitute the required frame + * interval. The default value set in this field for a FS operation + * when the PHY clock frequency is 60 MHz. The application can + * write a value to this register only after the Port Enable bit of + * the Host Port Control and Status register (HPRT.PrtEnaPort) + * has been set. If no value is programmed, the core calculates + * the value based on the PHY clock specified in the FS/LS PHY + * Clock Select field of the Host Configuration register + * (HCFG.FSLSPclkSel). Do not change the value of this field + * after the initial configuration. + * * 125 us (PHY clock frequency for HS) + * * 1 ms (PHY clock frequency for FS/LS) + */ + struct cvmx_usbcx_hfir_s { + __BITFIELD_FIELD(u32 reserved_16_31 : 16, + __BITFIELD_FIELD(u32 frint : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_hfnum + * + * Host Frame Number/Frame Time Remaining Register (HFNUM) + * + * This register indicates the current frame number. + * It also indicates the time remaining (in terms of the number of PHY clocks) + * in the current (micro)frame. + */ +union cvmx_usbcx_hfnum { + u32 u32; + /** + * struct cvmx_usbcx_hfnum_s + * @frrem: Frame Time Remaining (FrRem) + * Indicates the amount of time remaining in the current + * microframe (HS) or frame (FS/LS), in terms of PHY clocks. + * This field decrements on each PHY clock. When it reaches + * zero, this field is reloaded with the value in the Frame + * Interval register and a new SOF is transmitted on the USB. + * @frnum: Frame Number (FrNum) + * This field increments when a new SOF is transmitted on the + * USB, and is reset to 0 when it reaches 16'h3FFF. + */ + struct cvmx_usbcx_hfnum_s { + __BITFIELD_FIELD(u32 frrem : 16, + __BITFIELD_FIELD(u32 frnum : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_hprt + * + * Host Port Control and Status Register (HPRT) + * + * This register is available in both Host and Device modes. + * Currently, the OTG Host supports only one port. + * A single register holds USB port-related information such as USB reset, + * enable, suspend, resume, connect status, and test mode for each port. The + * R_SS_WC bits in this register can trigger an interrupt to the application + * through the Host Port Interrupt bit of the Core Interrupt register + * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this + * register and clear the bit that caused the interrupt. For the R_SS_WC bits, + * the application must write a 1 to the bit to clear the interrupt. + */ +union cvmx_usbcx_hprt { + u32 u32; + /** + * struct cvmx_usbcx_hprt_s + * @prtspd: Port Speed (PrtSpd) + * Indicates the speed of the device attached to this port. + * * 2'b00: High speed + * * 2'b01: Full speed + * * 2'b10: Low speed + * * 2'b11: Reserved + * @prttstctl: Port Test Control (PrtTstCtl) + * The application writes a nonzero value to this field to put + * the port into a Test mode, and the corresponding pattern is + * signaled on the port. + * * 4'b0000: Test mode disabled + * * 4'b0001: Test_J mode + * * 4'b0010: Test_K mode + * * 4'b0011: Test_SE0_NAK mode + * * 4'b0100: Test_Packet mode + * * 4'b0101: Test_Force_Enable + * * Others: Reserved + * PrtSpd must be zero (i.e. the interface must be in high-speed + * mode) to use the PrtTstCtl test modes. + * @prtpwr: Port Power (PrtPwr) + * The application uses this field to control power to this port, + * and the core clears this bit on an overcurrent condition. + * * 1'b0: Power off + * * 1'b1: Power on + * @prtlnsts: Port Line Status (PrtLnSts) + * Indicates the current logic level USB data lines + * * Bit [10]: Logic level of D- + * * Bit [11]: Logic level of D+ + * @prtrst: Port Reset (PrtRst) + * When the application sets this bit, a reset sequence is + * started on this port. The application must time the reset + * period and clear this bit after the reset sequence is + * complete. + * * 1'b0: Port not in reset + * * 1'b1: Port in reset + * The application must leave this bit set for at least a + * minimum duration mentioned below to start a reset on the + * port. The application can leave it set for another 10 ms in + * addition to the required minimum duration, before clearing + * the bit, even though there is no maximum limit set by the + * USB standard. + * * High speed: 50 ms + * * Full speed/Low speed: 10 ms + * @prtsusp: Port Suspend (PrtSusp) + * The application sets this bit to put this port in Suspend + * mode. The core only stops sending SOFs when this is set. + * To stop the PHY clock, the application must set the Port + * Clock Stop bit, which will assert the suspend input pin of + * the PHY. + * The read value of this bit reflects the current suspend + * status of the port. This bit is cleared by the core after a + * remote wakeup signal is detected or the application sets + * the Port Reset bit or Port Resume bit in this register or the + * Resume/Remote Wakeup Detected Interrupt bit or + * Disconnect Detected Interrupt bit in the Core Interrupt + * register (GINTSTS.WkUpInt or GINTSTS.DisconnInt, + * respectively). + * * 1'b0: Port not in Suspend mode + * * 1'b1: Port in Suspend mode + * @prtres: Port Resume (PrtRes) + * The application sets this bit to drive resume signaling on + * the port. The core continues to drive the resume signal + * until the application clears this bit. + * If the core detects a USB remote wakeup sequence, as + * indicated by the Port Resume/Remote Wakeup Detected + * Interrupt bit of the Core Interrupt register + * (GINTSTS.WkUpInt), the core starts driving resume + * signaling without application intervention and clears this bit + * when it detects a disconnect condition. The read value of + * this bit indicates whether the core is currently driving + * resume signaling. + * * 1'b0: No resume driven + * * 1'b1: Resume driven + * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng) + * The core sets this bit when the status of the Port + * Overcurrent Active bit (bit 4) in this register changes. + * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct) + * Indicates the overcurrent condition of the port. + * * 1'b0: No overcurrent condition + * * 1'b1: Overcurrent condition + * @prtenchng: Port Enable/Disable Change (PrtEnChng) + * The core sets this bit when the status of the Port Enable bit + * [2] of this register changes. + * @prtena: Port Enable (PrtEna) + * A port is enabled only by the core after a reset sequence, + * and is disabled by an overcurrent condition, a disconnect + * condition, or by the application clearing this bit. The + * application cannot set this bit by a register write. It can only + * clear it to disable the port. This bit does not trigger any + * interrupt to the application. + * * 1'b0: Port disabled + * * 1'b1: Port enabled + * @prtconndet: Port Connect Detected (PrtConnDet) + * The core sets this bit when a device connection is detected + * to trigger an interrupt to the application using the Host Port + * Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt). + * The application must write a 1 to this bit to clear the + * interrupt. + * @prtconnsts: Port Connect Status (PrtConnSts) + * * 0: No device is attached to the port. + * * 1: A device is attached to the port. + */ + struct cvmx_usbcx_hprt_s { + __BITFIELD_FIELD(u32 reserved_19_31 : 13, + __BITFIELD_FIELD(u32 prtspd : 2, + __BITFIELD_FIELD(u32 prttstctl : 4, + __BITFIELD_FIELD(u32 prtpwr : 1, + __BITFIELD_FIELD(u32 prtlnsts : 2, + __BITFIELD_FIELD(u32 reserved_9_9 : 1, + __BITFIELD_FIELD(u32 prtrst : 1, + __BITFIELD_FIELD(u32 prtsusp : 1, + __BITFIELD_FIELD(u32 prtres : 1, + __BITFIELD_FIELD(u32 prtovrcurrchng : 1, + __BITFIELD_FIELD(u32 prtovrcurract : 1, + __BITFIELD_FIELD(u32 prtenchng : 1, + __BITFIELD_FIELD(u32 prtena : 1, + __BITFIELD_FIELD(u32 prtconndet : 1, + __BITFIELD_FIELD(u32 prtconnsts : 1, + ;))))))))))))))) + } s; +}; + +/** + * cvmx_usbc#_hptxfsiz + * + * Host Periodic Transmit FIFO Size Register (HPTXFSIZ) + * + * This register holds the size and the memory start address of the Periodic + * TxFIFO, as shown in Figures 310 and 311. + */ +union cvmx_usbcx_hptxfsiz { + u32 u32; + /** + * struct cvmx_usbcx_hptxfsiz_s + * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize) + * This value is in terms of 32-bit words. + * * Minimum value is 16 + * * Maximum value is 32768 + * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr) + */ + struct cvmx_usbcx_hptxfsiz_s { + __BITFIELD_FIELD(u32 ptxfsize : 16, + __BITFIELD_FIELD(u32 ptxfstaddr : 16, + ;)) + } s; +}; + +/** + * cvmx_usbc#_hptxsts + * + * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS) + * + * This read-only register contains the free space information for the Periodic + * TxFIFO and the Periodic Transmit Request Queue + */ +union cvmx_usbcx_hptxsts { + u32 u32; + /** + * struct cvmx_usbcx_hptxsts_s + * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop) + * This indicates the entry in the Periodic Tx Request Queue that + * is currently being processes by the MAC. + * This register is used for debugging. + * * Bit [31]: Odd/Even (micro)frame + * - 1'b0: send in even (micro)frame + * - 1'b1: send in odd (micro)frame + * * Bits [30:27]: Channel/endpoint number + * * Bits [26:25]: Type + * - 2'b00: IN/OUT + * - 2'b01: Zero-length packet + * - 2'b10: CSPLIT + * - 2'b11: Disable channel command + * * Bit [24]: Terminate (last entry for the selected + * channel/endpoint) + * @ptxqspcavail: Periodic Transmit Request Queue Space Available + * (PTxQSpcAvail) + * Indicates the number of free locations available to be written + * in the Periodic Transmit Request Queue. This queue holds both + * IN and OUT requests. + * * 8'h0: Periodic Transmit Request Queue is full + * * 8'h1: 1 location available + * * 8'h2: 2 locations available + * * n: n locations available (0..8) + * * Others: Reserved + * @ptxfspcavail: Periodic Transmit Data FIFO Space Available + * (PTxFSpcAvail) + * Indicates the number of free locations available to be written + * to in the Periodic TxFIFO. + * Values are in terms of 32-bit words + * * 16'h0: Periodic TxFIFO is full + * * 16'h1: 1 word available + * * 16'h2: 2 words available + * * 16'hn: n words available (where 0..32768) + * * 16'h8000: 32768 words available + * * Others: Reserved + */ + struct cvmx_usbcx_hptxsts_s { + __BITFIELD_FIELD(u32 ptxqtop : 8, + __BITFIELD_FIELD(u32 ptxqspcavail : 8, + __BITFIELD_FIELD(u32 ptxfspcavail : 16, + ;))) + } s; +}; + +/** + * cvmx_usbn#_clk_ctl + * + * USBN_CLK_CTL = USBN's Clock Control + * + * This register is used to control the frequency of the hclk and the + * hreset and phy_rst signals. + */ +union cvmx_usbnx_clk_ctl { + u64 u64; + /** + * struct cvmx_usbnx_clk_ctl_s + * @divide2: The 'hclk' used by the USB subsystem is derived + * from the eclk. + * Also see the field DIVIDE. DIVIDE2<1> must currently + * be zero because it is not implemented, so the maximum + * ratio of eclk/hclk is currently 16. + * The actual divide number for hclk is: + * (DIVIDE2 + 1) * (DIVIDE + 1) + * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to + * generate the hclk in the USB Subsystem is held + * in reset. This bit must be set to '0' before + * changing the value os DIVIDE in this register. + * The reset to the HCLK_DIVIDERis also asserted + * when core reset is asserted. + * @p_x_on: Force USB-PHY on during suspend. + * '1' USB-PHY XO block is powered-down during + * suspend. + * '0' USB-PHY XO block is powered-up during + * suspend. + * The value of this field must be set while POR is + * active. + * @p_rtype: PHY reference clock type + * On CN50XX/CN52XX/CN56XX the values are: + * '0' The USB-PHY uses a 12MHz crystal as a clock source + * at the USB_XO and USB_XI pins. + * '1' Reserved. + * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the + * USB_XO pin. USB_XI should be tied to ground in this + * case. + * '3' Reserved. + * On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are: + * '0' Reserved. + * '1' Reserved. + * '2' The PHY PLL uses the XO block output as a reference. + * The XO block uses an external clock supplied on the + * XO pin. USB_XI should be tied to ground for this + * usage. + * '3' The XO block uses the clock from a crystal. + * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to + * remain powered in Suspend Mode. + * '1' The USB-PHY XO Bias, Bandgap and PLL are + * powered down in suspend mode. + * The value of this field must be set while POR is + * active. + * @p_c_sel: Phy clock speed select. + * Selects the reference clock / crystal frequency. + * '11': Reserved + * '10': 48 MHz (reserved when a crystal is used) + * '01': 24 MHz (reserved when a crystal is used) + * '00': 12 MHz + * The value of this field must be set while POR is + * active. + * NOTE: if a crystal is used as a reference clock, + * this field must be set to 12 MHz. + * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV. + * @sd_mode: Scaledown mode for the USBC. Control timing events + * in the USBC, for normal operation this must be '0'. + * @s_bist: Starts bist on the hclk memories, during the '0' + * to '1' transition. + * @por: Power On Reset for the PHY. + * Resets all the PHYS registers and state machines. + * @enable: When '1' allows the generation of the hclk. When + * '0' the hclk will not be generated. SEE DIVIDE + * field of this register. + * @prst: When this field is '0' the reset associated with + * the phy_clk functionality in the USB Subsystem is + * help in reset. This bit should not be set to '1' + * until the time it takes 6 clocks (hclk or phy_clk, + * whichever is slower) has passed. Under normal + * operation once this bit is set to '1' it should not + * be set to '0'. + * @hrst: When this field is '0' the reset associated with + * the hclk functioanlity in the USB Subsystem is + * held in reset.This bit should not be set to '1' + * until 12ms after phy_clk is stable. Under normal + * operation, once this bit is set to '1' it should + * not be set to '0'. + * @divide: The frequency of 'hclk' used by the USB subsystem + * is the eclk frequency divided by the value of + * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field + * DIVIDE2 of this register. + * The hclk frequency should be less than 125Mhz. + * After writing a value to this field the SW should + * read the field for the value written. + * The ENABLE field of this register should not be set + * until AFTER this field is set and then read. + */ + struct cvmx_usbnx_clk_ctl_s { + __BITFIELD_FIELD(u64 reserved_20_63 : 44, + __BITFIELD_FIELD(u64 divide2 : 2, + __BITFIELD_FIELD(u64 hclk_rst : 1, + __BITFIELD_FIELD(u64 p_x_on : 1, + __BITFIELD_FIELD(u64 p_rtype : 2, + __BITFIELD_FIELD(u64 p_com_on : 1, + __BITFIELD_FIELD(u64 p_c_sel : 2, + __BITFIELD_FIELD(u64 cdiv_byp : 1, + __BITFIELD_FIELD(u64 sd_mode : 2, + __BITFIELD_FIELD(u64 s_bist : 1, + __BITFIELD_FIELD(u64 por : 1, + __BITFIELD_FIELD(u64 enable : 1, + __BITFIELD_FIELD(u64 prst : 1, + __BITFIELD_FIELD(u64 hrst : 1, + __BITFIELD_FIELD(u64 divide : 3, + ;))))))))))))))) + } s; +}; + +/** + * cvmx_usbn#_usbp_ctl_status + * + * USBN_USBP_CTL_STATUS = USBP Control And Status Register + * + * Contains general control and status information for the USBN block. + */ +union cvmx_usbnx_usbp_ctl_status { + u64 u64; + /** + * struct cvmx_usbnx_usbp_ctl_status_s + * @txrisetune: HS Transmitter Rise/Fall Time Adjustment + * @txvreftune: HS DC Voltage Level Adjustment + * @txfslstune: FS/LS Source Impedance Adjustment + * @txhsxvtune: Transmitter High-Speed Crossover Adjustment + * @sqrxtune: Squelch Threshold Adjustment + * @compdistune: Disconnect Threshold Adjustment + * @otgtune: VBUS Valid Threshold Adjustment + * @otgdisable: OTG Block Disable + * @portreset: Per_Port Reset + * @drvvbus: Drive VBUS + * @lsbist: Low-Speed BIST Enable. + * @fsbist: Full-Speed BIST Enable. + * @hsbist: High-Speed BIST Enable. + * @bist_done: PHY Bist Done. + * Asserted at the end of the PHY BIST sequence. + * @bist_err: PHY Bist Error. + * Indicates an internal error was detected during + * the BIST sequence. + * @tdata_out: PHY Test Data Out. + * Presents either internally generated signals or + * test register contents, based upon the value of + * test_data_out_sel. + * @siddq: Drives the USBP (USB-PHY) SIDDQ input. + * Normally should be set to zero. + * When customers have no intent to use USB PHY + * interface, they should: + * - still provide 3.3V to USB_VDD33, and + * - tie USB_REXT to 3.3V supply, and + * - set USBN*_USBP_CTL_STATUS[SIDDQ]=1 + * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable + * @dma_bmode: When set to 1 the L2C DMA address will be updated + * with byte-counts between packets. When set to 0 + * the L2C DMA address is incremented to the next + * 4-byte aligned address after adding byte-count. + * @usbc_end: Bigendian input to the USB Core. This should be + * set to '0' for operation. + * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP. + * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP. + * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY. + * This signal enables the pull-down resistance on + * the D+ line. '1' pull down-resistance is connected + * to D+/ '0' pull down resistance is not connected + * to D+. When an A/B device is acting as a host + * (downstream-facing port), dp_pulldown and + * dm_pulldown are enabled. This must not toggle + * during normal operation. + * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY. + * This signal enables the pull-down resistance on + * the D- line. '1' pull down-resistance is connected + * to D-. '0' pull down resistance is not connected + * to D-. When an A/B device is acting as a host + * (downstream-facing port), dp_pulldown and + * dm_pulldown are enabled. This must not toggle + * during normal operation. + * @hst_mode: When '0' the USB is acting as HOST, when '1' + * USB is acting as device. This field needs to be + * set while the USB is in reset. + * @tuning: Transmitter Tuning for High-Speed Operation. + * Tunes the current supply and rise/fall output + * times for high-speed operation. + * [20:19] == 11: Current supply increased + * approximately 9% + * [20:19] == 10: Current supply increased + * approximately 4.5% + * [20:19] == 01: Design default. + * [20:19] == 00: Current supply decreased + * approximately 4.5% + * [22:21] == 11: Rise and fall times are increased. + * [22:21] == 10: Design default. + * [22:21] == 01: Rise and fall times are decreased. + * [22:21] == 00: Rise and fall times are decreased + * further as compared to the 01 setting. + * @tx_bs_enh: Transmit Bit Stuffing on [15:8]. + * Enables or disables bit stuffing on data[15:8] + * when bit-stuffing is enabled. + * @tx_bs_en: Transmit Bit Stuffing on [7:0]. + * Enables or disables bit stuffing on data[7:0] + * when bit-stuffing is enabled. + * @loop_enb: PHY Loopback Test Enable. + * '1': During data transmission the receive is + * enabled. + * '0': During data transmission the receive is + * disabled. + * Must be '0' for normal operation. + * @vtest_enb: Analog Test Pin Enable. + * '1' The PHY's analog_test pin is enabled for the + * input and output of applicable analog test signals. + * '0' THe analog_test pin is disabled. + * @bist_enb: Built-In Self Test Enable. + * Used to activate BIST in the PHY. + * @tdata_sel: Test Data Out Select. + * '1' test_data_out[3:0] (PHY) register contents + * are output. '0' internally generated signals are + * output. + * @taddr_in: Mode Address for Test Interface. + * Specifies the register address for writing to or + * reading from the PHY test interface register. + * @tdata_in: Internal Testing Register Input Data and Select + * This is a test bus. Data is present on [3:0], + * and its corresponding select (enable) is present + * on bits [7:4]. + * @ate_reset: Reset input from automatic test equipment. + * This is a test signal. When the USB Core is + * powered up (not in Susned Mode), an automatic + * tester can use this to disable phy_clock and + * free_clk, then re-enable them with an aligned + * phase. + * '1': The phy_clk and free_clk outputs are + * disabled. "0": The phy_clock and free_clk outputs + * are available within a specific period after the + * de-assertion. + */ + struct cvmx_usbnx_usbp_ctl_status_s { + __BITFIELD_FIELD(u64 txrisetune : 1, + __BITFIELD_FIELD(u64 txvreftune : 4, + __BITFIELD_FIELD(u64 txfslstune : 4, + __BITFIELD_FIELD(u64 txhsxvtune : 2, + __BITFIELD_FIELD(u64 sqrxtune : 3, + __BITFIELD_FIELD(u64 compdistune : 3, + __BITFIELD_FIELD(u64 otgtune : 3, + __BITFIELD_FIELD(u64 otgdisable : 1, + __BITFIELD_FIELD(u64 portreset : 1, + __BITFIELD_FIELD(u64 drvvbus : 1, + __BITFIELD_FIELD(u64 lsbist : 1, + __BITFIELD_FIELD(u64 fsbist : 1, + __BITFIELD_FIELD(u64 hsbist : 1, + __BITFIELD_FIELD(u64 bist_done : 1, + __BITFIELD_FIELD(u64 bist_err : 1, + __BITFIELD_FIELD(u64 tdata_out : 4, + __BITFIELD_FIELD(u64 siddq : 1, + __BITFIELD_FIELD(u64 txpreemphasistune : 1, + __BITFIELD_FIELD(u64 dma_bmode : 1, + __BITFIELD_FIELD(u64 usbc_end : 1, + __BITFIELD_FIELD(u64 usbp_bist : 1, + __BITFIELD_FIELD(u64 tclk : 1, + __BITFIELD_FIELD(u64 dp_pulld : 1, + __BITFIELD_FIELD(u64 dm_pulld : 1, + __BITFIELD_FIELD(u64 hst_mode : 1, + __BITFIELD_FIELD(u64 tuning : 4, + __BITFIELD_FIELD(u64 tx_bs_enh : 1, + __BITFIELD_FIELD(u64 tx_bs_en : 1, + __BITFIELD_FIELD(u64 loop_enb : 1, + __BITFIELD_FIELD(u64 vtest_enb : 1, + __BITFIELD_FIELD(u64 bist_enb : 1, + __BITFIELD_FIELD(u64 tdata_sel : 1, + __BITFIELD_FIELD(u64 taddr_in : 4, + __BITFIELD_FIELD(u64 tdata_in : 8, + __BITFIELD_FIELD(u64 ate_reset : 1, + ;))))))))))))))))))))))))))))))))))) + } s; +}; + +#endif /* __OCTEON_HCD_H__ */ |