Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 266 insertions, 0 deletions

diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
new file mode 100644
index 000000000..f5de58645
--- /dev/null
+++ b/drivers/usb/host/ohci-sm501.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2005 David Brownell
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2008 Magnus Damm
+ *
+ * SM501 Bus Glue - based on ohci-omap.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+static int ohci_sm501_init(struct usb_hcd *hcd)
+{
+	return ohci_init(hcd_to_ohci(hcd));
+}
+
+static int ohci_sm501_start(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	int ret;
+
+	ret = ohci_run(hcd_to_ohci(hcd));
+	if (ret < 0) {
+		dev_err(dev, "can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_sm501_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SM501 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sm501_init,
+	.start =		ohci_sm501_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ohci_sm501_hc_driver;
+	struct device *dev = &pdev->dev;
+	struct resource	*res, *mem;
+	int retval, irq;
+	struct usb_hcd *hcd = NULL;
+
+	irq = retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
+		goto err0;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (mem == NULL) {
+		dev_err(dev, "no resource definition for memory\n");
+		retval = -ENOENT;
+		goto err0;
+	}
+
+	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
+		dev_err(dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto err0;
+	}
+
+	/* allocate, reserve and remap resources for registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "no resource definition for registers\n");
+		retval = -ENOENT;
+		goto err1;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,	pdev->name)) {
+		dev_err(dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto err3;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_err(dev, "cannot remap registers\n");
+		retval = -ENXIO;
+		goto err4;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	/* The sm501 chip is equipped with local memory that may be used
+	 * by on-chip devices such as the video controller and the usb host.
+	 * This driver uses genalloc so that usb allocations with
+	 * gen_pool_dma_alloc() allocate from this local memory. The dma_handle
+	 * returned by gen_pool_dma_alloc() will be an offset starting from 0
+	 * for the first local memory byte.
+	 *
+	 * So as long as data is allocated using gen_pool_dma_alloc() all is
+	 * fine. This is however not always the case - buffers may be allocated
+	 * using kmalloc() - so the usb core needs to be told that it must copy
+	 * data into our local memory if the buffers happen to be placed in
+	 * regular memory. A non-null hcd->localmem_pool initialized by
+	 * the call to usb_hcd_setup_local_mem() below does just that.
+	 */
+
+	retval = usb_hcd_setup_local_mem(hcd, mem->start,
+					 mem->start - mem->parent->start,
+					 resource_size(mem));
+	if (retval < 0)
+		goto err5;
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto err5;
+	device_wakeup_enable(hcd->self.controller);
+
+	/* enable power and unmask interrupts */
+
+	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
+	sm501_modify_reg(dev->parent, SM501_IRQ_MASK, 1 << 6, 0);
+
+	return 0;
+err5:
+	iounmap(hcd->regs);
+err4:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err3:
+	usb_put_hcd(hcd);
+err1:
+	release_mem_region(mem->start, resource_size(mem));
+err0:
+	return retval;
+}
+
+static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct resource	*mem;
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (mem)
+		release_mem_region(mem->start, resource_size(mem));
+
+	/* mask interrupts and disable power */
+
+	sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6);
+	sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd  *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
+	return ret;
+}
+
+static int ohci_sm501_resume(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
+	ohci_resume(hcd, false);
+	return 0;
+}
+#else
+#define ohci_sm501_suspend NULL
+#define ohci_sm501_resume NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Driver definition to register with the SM501 bus
+ */
+static struct platform_driver ohci_hcd_sm501_driver = {
+	.probe		= ohci_hcd_sm501_drv_probe,
+	.remove		= ohci_hcd_sm501_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= ohci_sm501_suspend,
+	.resume		= ohci_sm501_resume,
+	.driver		= {
+		.name	= "sm501-usb",
+	},
+};
+MODULE_ALIAS("platform:sm501-usb");