diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/host/xhci-hub.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
-rw-r--r-- | drivers/usb/host/xhci-hub.c | 1980 |
1 files changed, 1980 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c new file mode 100644 index 000000000..4619d5e89 --- /dev/null +++ b/drivers/usb/host/xhci-hub.c @@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xHCI host controller driver + * + * Copyright (C) 2008 Intel Corp. + * + * Author: Sarah Sharp + * Some code borrowed from the Linux EHCI driver. + */ + + +#include <linux/slab.h> +#include <asm/unaligned.h> +#include <linux/bitfield.h> + +#include "xhci.h" +#include "xhci-trace.h" + +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_PE) + +/* Default sublink speed attribute of each lane */ +static u32 ssp_cap_default_ssa[] = { + 0x00050034, /* USB 3.0 SS Gen1x1 id:4 symmetric rx 5Gbps */ + 0x000500b4, /* USB 3.0 SS Gen1x1 id:4 symmetric tx 5Gbps */ + 0x000a4035, /* USB 3.1 SSP Gen2x1 id:5 symmetric rx 10Gbps */ + 0x000a40b5, /* USB 3.1 SSP Gen2x1 id:5 symmetric tx 10Gbps */ + 0x00054036, /* USB 3.2 SSP Gen1x2 id:6 symmetric rx 5Gbps */ + 0x000540b6, /* USB 3.2 SSP Gen1x2 id:6 symmetric tx 5Gbps */ + 0x000a4037, /* USB 3.2 SSP Gen2x2 id:7 symmetric rx 10Gbps */ + 0x000a40b7, /* USB 3.2 SSP Gen2x2 id:7 symmetric tx 10Gbps */ +}; + +static int xhci_create_usb3x_bos_desc(struct xhci_hcd *xhci, char *buf, + u16 wLength) +{ + struct usb_bos_descriptor *bos; + struct usb_ss_cap_descriptor *ss_cap; + struct usb_ssp_cap_descriptor *ssp_cap; + struct xhci_port_cap *port_cap = NULL; + u16 bcdUSB; + u32 reg; + u32 min_rate = 0; + u8 min_ssid; + u8 ssac; + u8 ssic; + int offset; + int i; + + /* BOS descriptor */ + bos = (struct usb_bos_descriptor *)buf; + bos->bLength = USB_DT_BOS_SIZE; + bos->bDescriptorType = USB_DT_BOS; + bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE + + USB_DT_USB_SS_CAP_SIZE); + bos->bNumDeviceCaps = 1; + + /* Create the descriptor for port with the highest revision */ + for (i = 0; i < xhci->num_port_caps; i++) { + u8 major = xhci->port_caps[i].maj_rev; + u8 minor = xhci->port_caps[i].min_rev; + u16 rev = (major << 8) | minor; + + if (i == 0 || bcdUSB < rev) { + bcdUSB = rev; + port_cap = &xhci->port_caps[i]; + } + } + + if (bcdUSB >= 0x0310) { + if (port_cap->psi_count) { + u8 num_sym_ssa = 0; + + for (i = 0; i < port_cap->psi_count; i++) { + if ((port_cap->psi[i] & PLT_MASK) == PLT_SYM) + num_sym_ssa++; + } + + ssac = port_cap->psi_count + num_sym_ssa - 1; + ssic = port_cap->psi_uid_count - 1; + } else { + if (bcdUSB >= 0x0320) + ssac = 7; + else + ssac = 3; + + ssic = (ssac + 1) / 2 - 1; + } + + bos->bNumDeviceCaps++; + bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE + + USB_DT_USB_SS_CAP_SIZE + + USB_DT_USB_SSP_CAP_SIZE(ssac)); + } + + if (wLength < USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE) + return wLength; + + /* SuperSpeed USB Device Capability */ + ss_cap = (struct usb_ss_cap_descriptor *)&buf[USB_DT_BOS_SIZE]; + ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE; + ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE; + ss_cap->bmAttributes = 0; /* set later */ + ss_cap->wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION); + ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; + ss_cap->bU1devExitLat = 0; /* set later */ + ss_cap->bU2DevExitLat = 0; /* set later */ + + reg = readl(&xhci->cap_regs->hcc_params); + if (HCC_LTC(reg)) + ss_cap->bmAttributes |= USB_LTM_SUPPORT; + + if ((xhci->quirks & XHCI_LPM_SUPPORT)) { + reg = readl(&xhci->cap_regs->hcs_params3); + ss_cap->bU1devExitLat = HCS_U1_LATENCY(reg); + ss_cap->bU2DevExitLat = cpu_to_le16(HCS_U2_LATENCY(reg)); + } + + if (wLength < le16_to_cpu(bos->wTotalLength)) + return wLength; + + if (bcdUSB < 0x0310) + return le16_to_cpu(bos->wTotalLength); + + ssp_cap = (struct usb_ssp_cap_descriptor *)&buf[USB_DT_BOS_SIZE + + USB_DT_USB_SS_CAP_SIZE]; + ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac); + ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE; + ssp_cap->bReserved = 0; + ssp_cap->wReserved = 0; + ssp_cap->bmAttributes = + cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic)); + + if (!port_cap->psi_count) { + for (i = 0; i < ssac + 1; i++) + ssp_cap->bmSublinkSpeedAttr[i] = + cpu_to_le32(ssp_cap_default_ssa[i]); + + min_ssid = 4; + goto out; + } + + offset = 0; + for (i = 0; i < port_cap->psi_count; i++) { + u32 psi; + u32 attr; + u8 ssid; + u8 lp; + u8 lse; + u8 psie; + u16 lane_mantissa; + u16 psim; + u16 plt; + + psi = port_cap->psi[i]; + ssid = XHCI_EXT_PORT_PSIV(psi); + lp = XHCI_EXT_PORT_LP(psi); + psie = XHCI_EXT_PORT_PSIE(psi); + psim = XHCI_EXT_PORT_PSIM(psi); + plt = psi & PLT_MASK; + + lse = psie; + lane_mantissa = psim; + + /* Shift to Gbps and set SSP Link Protocol if 10Gpbs */ + for (; psie < USB_SSP_SUBLINK_SPEED_LSE_GBPS; psie++) + psim /= 1000; + + if (!min_rate || psim < min_rate) { + min_ssid = ssid; + min_rate = psim; + } + + /* Some host controllers don't set the link protocol for SSP */ + if (psim >= 10) + lp = USB_SSP_SUBLINK_SPEED_LP_SSP; + + /* + * PSIM and PSIE represent the total speed of PSI. The BOS + * descriptor SSP sublink speed attribute lane mantissa + * describes the lane speed. E.g. PSIM and PSIE for gen2x2 + * is 20Gbps, but the BOS descriptor lane speed mantissa is + * 10Gbps. Check and modify the mantissa value to match the + * lane speed. + */ + if (bcdUSB == 0x0320 && plt == PLT_SYM) { + /* + * The PSI dword for gen1x2 and gen2x1 share the same + * values. But the lane speed for gen1x2 is 5Gbps while + * gen2x1 is 10Gbps. If the previous PSI dword SSID is + * 5 and the PSIE and PSIM match with SSID 6, let's + * assume that the controller follows the default speed + * id with SSID 6 for gen1x2. + */ + if (ssid == 6 && psie == 3 && psim == 10 && i) { + u32 prev = port_cap->psi[i - 1]; + + if ((prev & PLT_MASK) == PLT_SYM && + XHCI_EXT_PORT_PSIV(prev) == 5 && + XHCI_EXT_PORT_PSIE(prev) == 3 && + XHCI_EXT_PORT_PSIM(prev) == 10) { + lse = USB_SSP_SUBLINK_SPEED_LSE_GBPS; + lane_mantissa = 5; + } + } + + if (psie == 3 && psim > 10) { + lse = USB_SSP_SUBLINK_SPEED_LSE_GBPS; + lane_mantissa = 10; + } + } + + attr = (FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ssid) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, lp) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, lse) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, lane_mantissa)); + + switch (plt) { + case PLT_SYM: + attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, + USB_SSP_SUBLINK_SPEED_ST_SYM_RX); + ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr); + + attr &= ~USB_SSP_SUBLINK_SPEED_ST; + attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, + USB_SSP_SUBLINK_SPEED_ST_SYM_TX); + ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr); + break; + case PLT_ASYM_RX: + attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, + USB_SSP_SUBLINK_SPEED_ST_ASYM_RX); + ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr); + break; + case PLT_ASYM_TX: + attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, + USB_SSP_SUBLINK_SPEED_ST_ASYM_TX); + ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr); + break; + } + } +out: + ssp_cap->wFunctionalitySupport = + cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, + min_ssid) | + FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) | + FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1)); + + return le16_to_cpu(bos->wTotalLength); +} + +static void xhci_common_hub_descriptor(struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc, int ports) +{ + u16 temp; + + desc->bHubContrCurrent = 0; + + desc->bNbrPorts = ports; + temp = 0; + /* Bits 1:0 - support per-port power switching, or power always on */ + if (HCC_PPC(xhci->hcc_params)) + temp |= HUB_CHAR_INDV_PORT_LPSM; + else + temp |= HUB_CHAR_NO_LPSM; + /* Bit 2 - root hubs are not part of a compound device */ + /* Bits 4:3 - individual port over current protection */ + temp |= HUB_CHAR_INDV_PORT_OCPM; + /* Bits 6:5 - no TTs in root ports */ + /* Bit 7 - no port indicators */ + desc->wHubCharacteristics = cpu_to_le16(temp); +} + +/* Fill in the USB 2.0 roothub descriptor */ +static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 temp; + __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; + u32 portsc; + unsigned int i; + struct xhci_hub *rhub; + + rhub = &xhci->usb2_rhub; + ports = rhub->num_ports; + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = USB_DT_HUB; + temp = 1 + (ports / 8); + desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp; + desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.8 says 20ms */ + + /* The Device Removable bits are reported on a byte granularity. + * If the port doesn't exist within that byte, the bit is set to 0. + */ + memset(port_removable, 0, sizeof(port_removable)); + for (i = 0; i < ports; i++) { + portsc = readl(rhub->ports[i]->addr); + /* If a device is removable, PORTSC reports a 0, same as in the + * hub descriptor DeviceRemovable bits. + */ + if (portsc & PORT_DEV_REMOVE) + /* This math is hairy because bit 0 of DeviceRemovable + * is reserved, and bit 1 is for port 1, etc. + */ + port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8); + } + + /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN + * ports on it. The USB 2.0 specification says that there are two + * variable length fields at the end of the hub descriptor: + * DeviceRemovable and PortPwrCtrlMask. But since we can have less than + * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array + * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to + * 0xFF, so we initialize the both arrays (DeviceRemovable and + * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each + * set of ports that actually exist. + */ + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + memset(desc->u.hs.PortPwrCtrlMask, 0xff, + sizeof(desc->u.hs.PortPwrCtrlMask)); + + for (i = 0; i < (ports + 1 + 7) / 8; i++) + memset(&desc->u.hs.DeviceRemovable[i], port_removable[i], + sizeof(__u8)); +} + +/* Fill in the USB 3.0 roothub descriptor */ +static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 port_removable; + u32 portsc; + unsigned int i; + struct xhci_hub *rhub; + + rhub = &xhci->usb3_rhub; + ports = rhub->num_ports; + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = USB_DT_SS_HUB; + desc->bDescLength = USB_DT_SS_HUB_SIZE; + desc->bPwrOn2PwrGood = 50; /* usb 3.1 may fail if less than 100ms */ + + /* header decode latency should be zero for roothubs, + * see section 4.23.5.2. + */ + desc->u.ss.bHubHdrDecLat = 0; + desc->u.ss.wHubDelay = 0; + + port_removable = 0; + /* bit 0 is reserved, bit 1 is for port 1, etc. */ + for (i = 0; i < ports; i++) { + portsc = readl(rhub->ports[i]->addr); + if (portsc & PORT_DEV_REMOVE) + port_removable |= 1 << (i + 1); + } + + desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); +} + +static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + + if (hcd->speed >= HCD_USB3) + xhci_usb3_hub_descriptor(hcd, xhci, desc); + else + xhci_usb2_hub_descriptor(hcd, xhci, desc); + +} + +static unsigned int xhci_port_speed(unsigned int port_status) +{ + if (DEV_LOWSPEED(port_status)) + return USB_PORT_STAT_LOW_SPEED; + if (DEV_HIGHSPEED(port_status)) + return USB_PORT_STAT_HIGH_SPEED; + /* + * FIXME: Yes, we should check for full speed, but the core uses that as + * a default in portspeed() in usb/core/hub.c (which is the only place + * USB_PORT_STAT_*_SPEED is used). + */ + return 0; +} + +/* + * These bits are Read Only (RO) and should be saved and written to the + * registers: 0, 3, 10:13, 30 + * connect status, over-current status, port speed, and device removable. + * connect status and port speed are also sticky - meaning they're in + * the AUX well and they aren't changed by a hot, warm, or cold reset. + */ +#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30)) +/* + * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit: + * bits 5:8, 9, 14:15, 25:27 + * link state, port power, port indicator state, "wake on" enable state + */ +#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25)) +/* + * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect: + * bit 4 (port reset) + */ +#define XHCI_PORT_RW1S ((1<<4)) +/* + * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect: + * bits 1, 17, 18, 19, 20, 21, 22, 23 + * port enable/disable, and + * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports), + * over-current, reset, link state, and L1 change + */ +#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17)) +/* + * Bit 16 is RW, and writing a '1' to it causes the link state control to be + * latched in + */ +#define XHCI_PORT_RW ((1<<16)) +/* + * These bits are Reserved Zero (RsvdZ) and zero should be written to them: + * bits 2, 24, 28:31 + */ +#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28)) + +/* + * Given a port state, this function returns a value that would result in the + * port being in the same state, if the value was written to the port status + * control register. + * Save Read Only (RO) bits and save read/write bits where + * writing a 0 clears the bit and writing a 1 sets the bit (RWS). + * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect. + */ +u32 xhci_port_state_to_neutral(u32 state) +{ + /* Save read-only status and port state */ + return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); +} + +/* + * find slot id based on port number. + * @port: The one-based port number from one of the two split roothubs. + */ +int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 port) +{ + int slot_id; + int i; + enum usb_device_speed speed; + + slot_id = 0; + for (i = 0; i < MAX_HC_SLOTS; i++) { + if (!xhci->devs[i] || !xhci->devs[i]->udev) + continue; + speed = xhci->devs[i]->udev->speed; + if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3)) + && xhci->devs[i]->fake_port == port) { + slot_id = i; + break; + } + } + + return slot_id; +} + +/* + * Stop device + * It issues stop endpoint command for EP 0 to 30. And wait the last command + * to complete. + * suspend will set to 1, if suspend bit need to set in command. + */ +static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) +{ + struct xhci_virt_device *virt_dev; + struct xhci_command *cmd; + unsigned long flags; + int ret; + int i; + + ret = 0; + virt_dev = xhci->devs[slot_id]; + if (!virt_dev) + return -ENODEV; + + trace_xhci_stop_device(virt_dev); + + cmd = xhci_alloc_command(xhci, true, GFP_NOIO); + if (!cmd) + return -ENOMEM; + + spin_lock_irqsave(&xhci->lock, flags); + for (i = LAST_EP_INDEX; i > 0; i--) { + if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) { + struct xhci_ep_ctx *ep_ctx; + struct xhci_command *command; + + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, i); + + /* Check ep is running, required by AMD SNPS 3.1 xHC */ + if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_RUNNING) + continue; + + command = xhci_alloc_command(xhci, false, GFP_NOWAIT); + if (!command) { + spin_unlock_irqrestore(&xhci->lock, flags); + ret = -ENOMEM; + goto cmd_cleanup; + } + + ret = xhci_queue_stop_endpoint(xhci, command, slot_id, + i, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, command); + goto cmd_cleanup; + } + } + } + ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + goto cmd_cleanup; + } + + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for last stop endpoint command to finish */ + wait_for_completion(cmd->completion); + + if (cmd->status == COMP_COMMAND_ABORTED || + cmd->status == COMP_COMMAND_RING_STOPPED) { + xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); + ret = -ETIME; + } + +cmd_cleanup: + xhci_free_command(xhci, cmd); + return ret; +} + +/* + * Ring device, it rings the all doorbells unconditionally. + */ +void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) +{ + int i, s; + struct xhci_virt_ep *ep; + + for (i = 0; i < LAST_EP_INDEX + 1; i++) { + ep = &xhci->devs[slot_id]->eps[i]; + + if (ep->ep_state & EP_HAS_STREAMS) { + for (s = 1; s < ep->stream_info->num_streams; s++) + xhci_ring_ep_doorbell(xhci, slot_id, i, s); + } else if (ep->ring && ep->ring->dequeue) { + xhci_ring_ep_doorbell(xhci, slot_id, i, 0); + } + } + + return; +} + +static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 wIndex, __le32 __iomem *addr, u32 port_status) +{ + /* Don't allow the USB core to disable SuperSpeed ports. */ + if (hcd->speed >= HCD_USB3) { + xhci_dbg(xhci, "Ignoring request to disable " + "SuperSpeed port.\n"); + return; + } + + if (xhci->quirks & XHCI_BROKEN_PORT_PED) { + xhci_dbg(xhci, + "Broken Port Enabled/Disabled, ignoring port disable request.\n"); + return; + } + + /* Write 1 to disable the port */ + writel(port_status | PORT_PE, addr); + port_status = readl(addr); + xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n", + hcd->self.busnum, wIndex + 1, port_status); +} + +static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, + u16 wIndex, __le32 __iomem *addr, u32 port_status) +{ + char *port_change_bit; + u32 status; + + switch (wValue) { + case USB_PORT_FEAT_C_RESET: + status = PORT_RC; + port_change_bit = "reset"; + break; + case USB_PORT_FEAT_C_BH_PORT_RESET: + status = PORT_WRC; + port_change_bit = "warm(BH) reset"; + break; + case USB_PORT_FEAT_C_CONNECTION: + status = PORT_CSC; + port_change_bit = "connect"; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + status = PORT_OCC; + port_change_bit = "over-current"; + break; + case USB_PORT_FEAT_C_ENABLE: + status = PORT_PEC; + port_change_bit = "enable/disable"; + break; + case USB_PORT_FEAT_C_SUSPEND: + status = PORT_PLC; + port_change_bit = "suspend/resume"; + break; + case USB_PORT_FEAT_C_PORT_LINK_STATE: + status = PORT_PLC; + port_change_bit = "link state"; + break; + case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: + status = PORT_CEC; + port_change_bit = "config error"; + break; + default: + /* Should never happen */ + return; + } + /* Change bits are all write 1 to clear */ + writel(port_status | status, addr); + port_status = readl(addr); + + xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n", + wIndex + 1, port_change_bit, port_status); +} + +struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (hcd->speed >= HCD_USB3) + return &xhci->usb3_rhub; + return &xhci->usb2_rhub; +} + +/* + * xhci_set_port_power() must be called with xhci->lock held. + * It will release and re-aquire the lock while calling ACPI + * method. + */ +static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, + u16 index, bool on, unsigned long *flags) + __must_hold(&xhci->lock) +{ + struct xhci_hub *rhub; + struct xhci_port *port; + u32 temp; + + rhub = xhci_get_rhub(hcd); + port = rhub->ports[index]; + temp = readl(port->addr); + + xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n", + hcd->self.busnum, index + 1, on ? "ON" : "OFF", temp); + + temp = xhci_port_state_to_neutral(temp); + + if (on) { + /* Power on */ + writel(temp | PORT_POWER, port->addr); + readl(port->addr); + } else { + /* Power off */ + writel(temp & ~PORT_POWER, port->addr); + } + + spin_unlock_irqrestore(&xhci->lock, *flags); + temp = usb_acpi_power_manageable(hcd->self.root_hub, + index); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + index, on); + spin_lock_irqsave(&xhci->lock, *flags); +} + +static void xhci_port_set_test_mode(struct xhci_hcd *xhci, + u16 test_mode, u16 wIndex) +{ + u32 temp; + struct xhci_port *port; + + /* xhci only supports test mode for usb2 ports */ + port = xhci->usb2_rhub.ports[wIndex]; + temp = readl(port->addr + PORTPMSC); + temp |= test_mode << PORT_TEST_MODE_SHIFT; + writel(temp, port->addr + PORTPMSC); + xhci->test_mode = test_mode; + if (test_mode == USB_TEST_FORCE_ENABLE) + xhci_start(xhci); +} + +static int xhci_enter_test_mode(struct xhci_hcd *xhci, + u16 test_mode, u16 wIndex, unsigned long *flags) + __must_hold(&xhci->lock) +{ + struct usb_hcd *usb3_hcd = xhci_get_usb3_hcd(xhci); + int i, retval; + + /* Disable all Device Slots */ + xhci_dbg(xhci, "Disable all slots\n"); + spin_unlock_irqrestore(&xhci->lock, *flags); + for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + if (!xhci->devs[i]) + continue; + + retval = xhci_disable_slot(xhci, i); + xhci_free_virt_device(xhci, i); + if (retval) + xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n", + i, retval); + } + spin_lock_irqsave(&xhci->lock, *flags); + /* Put all ports to the Disable state by clear PP */ + xhci_dbg(xhci, "Disable all port (PP = 0)\n"); + /* Power off USB3 ports*/ + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) + xhci_set_port_power(xhci, usb3_hcd, i, false, flags); + /* Power off USB2 ports*/ + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) + xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags); + /* Stop the controller */ + xhci_dbg(xhci, "Stop controller\n"); + retval = xhci_halt(xhci); + if (retval) + return retval; + /* Disable runtime PM for test mode */ + pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller); + /* Set PORTPMSC.PTC field to enter selected test mode */ + /* Port is selected by wIndex. port_id = wIndex + 1 */ + xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n", + test_mode, wIndex + 1); + xhci_port_set_test_mode(xhci, test_mode, wIndex); + return retval; +} + +static int xhci_exit_test_mode(struct xhci_hcd *xhci) +{ + int retval; + + if (!xhci->test_mode) { + xhci_err(xhci, "Not in test mode, do nothing.\n"); + return 0; + } + if (xhci->test_mode == USB_TEST_FORCE_ENABLE && + !(xhci->xhc_state & XHCI_STATE_HALTED)) { + retval = xhci_halt(xhci); + if (retval) + return retval; + } + pm_runtime_allow(xhci_to_hcd(xhci)->self.controller); + xhci->test_mode = 0; + return xhci_reset(xhci, XHCI_RESET_SHORT_USEC); +} + +void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, + u32 link_state) +{ + u32 temp; + u32 portsc; + + portsc = readl(port->addr); + temp = xhci_port_state_to_neutral(portsc); + temp &= ~PORT_PLS_MASK; + temp |= PORT_LINK_STROBE | link_state; + writel(temp, port->addr); + + xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x", + port->rhub->hcd->self.busnum, port->hcd_portnum + 1, + portsc, temp); +} + +static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, + struct xhci_port *port, u16 wake_mask) +{ + u32 temp; + + temp = readl(port->addr); + temp = xhci_port_state_to_neutral(temp); + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) + temp |= PORT_WKCONN_E; + else + temp &= ~PORT_WKCONN_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT) + temp |= PORT_WKDISC_E; + else + temp &= ~PORT_WKDISC_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT) + temp |= PORT_WKOC_E; + else + temp &= ~PORT_WKOC_E; + + writel(temp, port->addr); +} + +/* Test and clear port RWC bit */ +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, + u32 port_bit) +{ + u32 temp; + + temp = readl(port->addr); + if (temp & port_bit) { + temp = xhci_port_state_to_neutral(temp); + temp |= port_bit; + writel(temp, port->addr); + } +} + +/* Updates Link Status for super Speed port */ +static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, + u32 *status, u32 status_reg) +{ + u32 pls = status_reg & PORT_PLS_MASK; + + /* When the CAS bit is set then warm reset + * should be performed on port + */ + if (status_reg & PORT_CAS) { + /* The CAS bit can be set while the port is + * in any link state. + * Only roothubs have CAS bit, so we + * pretend to be in compliance mode + * unless we're already in compliance + * or the inactive state. + */ + if (pls != USB_SS_PORT_LS_COMP_MOD && + pls != USB_SS_PORT_LS_SS_INACTIVE) { + pls = USB_SS_PORT_LS_COMP_MOD; + } + /* Return also connection bit - + * hub state machine resets port + * when this bit is set. + */ + pls |= USB_PORT_STAT_CONNECTION; + } else { + /* + * Resume state is an xHCI internal state. Do not report it to + * usb core, instead, pretend to be U3, thus usb core knows + * it's not ready for transfer. + */ + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; + return; + } + + /* + * If CAS bit isn't set but the Port is already at + * Compliance Mode, fake a connection so the USB core + * notices the Compliance state and resets the port. + * This resolves an issue generated by the SN65LVPE502CP + * in which sometimes the port enters compliance mode + * caused by a delay on the host-device negotiation. + */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (pls == USB_SS_PORT_LS_COMP_MOD)) + pls |= USB_PORT_STAT_CONNECTION; + } + + /* update status field */ + *status |= pls; +} + +/* + * Function for Compliance Mode Quirk. + * + * This Function verifies if all xhc USB3 ports have entered U0, if so, + * the compliance mode timer is deleted. A port won't enter + * compliance mode if it has previously entered U0. + */ +static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, + u16 wIndex) +{ + u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1); + bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); + + if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) + return; + + if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { + xhci->port_status_u0 |= 1 << wIndex; + if (xhci->port_status_u0 == all_ports_seen_u0) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "All USB3 ports have entered U0 already!"); + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "Compliance Mode Recovery Timer Deleted."); + } + } +} + +static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, + u32 *status, u32 portsc, + unsigned long *flags) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + int slot_id; + u32 wIndex; + + hcd = port->rhub->hcd; + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(hcd); + wIndex = port->hcd_portnum; + + if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) { + *status = 0xffffffff; + return -EINVAL; + } + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + usb_hcd_start_port_resume(&hcd->self, wIndex); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + + xhci_dbg(xhci, "resume USB2 port %d-%d\n", + hcd->self.busnum, wIndex + 1); + + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, *flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS)); + spin_lock_irqsave(&xhci->lock, *flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + *status = 0xffffffff; + return -ENODEV; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = readl(port->addr); + + xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n", + hcd->self.busnum, wIndex + 1, port_status); + *status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); + } + + usb_hcd_end_port_resume(&hcd->self, wIndex); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. + */ + *status |= USB_PORT_STAT_SUSPEND; + } + return 0; +} + +static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) +{ + u32 ext_stat = 0; + int speed_id; + + /* only support rx and tx lane counts of 1 in usb3.1 spec */ + speed_id = DEV_PORT_SPEED(raw_port_status); + ext_stat |= speed_id; /* bits 3:0, RX speed id */ + ext_stat |= speed_id << 4; /* bits 7:4, TX speed id */ + + ext_stat |= PORT_RX_LANES(port_li) << 8; /* bits 11:8 Rx lane count */ + ext_stat |= PORT_TX_LANES(port_li) << 12; /* bits 15:12 Tx lane count */ + + return ext_stat; +} + +static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, + u32 portsc) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + u32 link_state; + u32 portnum; + + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(port->rhub->hcd); + hcd = port->rhub->hcd; + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB3 specific wPortChange bits + * + * Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + + if (portsc & PORT_PLC && (link_state != XDEV_RESUME)) + *status |= USB_PORT_STAT_C_LINK_STATE << 16; + if (portsc & PORT_WRC) + *status |= USB_PORT_STAT_C_BH_RESET << 16; + if (portsc & PORT_CEC) + *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; + + /* USB3 specific wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_SS_PORT_STAT_POWER; + /* link state handling */ + if (link_state == XDEV_U0) + bus_state->suspended_ports &= ~(1 << portnum); + } + + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum) && + link_state != XDEV_RESUME && + link_state != XDEV_RECOVERY) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + + xhci_hub_report_usb3_link_state(xhci, status, portsc); + xhci_del_comp_mod_timer(xhci, portsc, portnum); +} + +static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, + u32 portsc, unsigned long *flags) +{ + struct xhci_bus_state *bus_state; + u32 link_state; + u32 portnum; + int ret; + + bus_state = &port->rhub->bus_state; + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB2 wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_PORT_STAT_POWER; + + /* link state is only valid if port is powered */ + if (link_state == XDEV_U3) + *status |= USB_PORT_STAT_SUSPEND; + if (link_state == XDEV_U2) + *status |= USB_PORT_STAT_L1; + if (link_state == XDEV_U0) { + if (bus_state->resume_done[portnum]) + usb_hcd_end_port_resume(&port->rhub->hcd->self, + portnum); + bus_state->resume_done[portnum] = 0; + clear_bit(portnum, &bus_state->resuming_ports); + if (bus_state->suspended_ports & (1 << portnum)) { + bus_state->suspended_ports &= ~(1 << portnum); + bus_state->port_c_suspend |= 1 << portnum; + } + } + if (link_state == XDEV_RESUME) { + ret = xhci_handle_usb2_port_link_resume(port, status, + portsc, flags); + if (ret) + return; + } + } +} + +/* + * Converts a raw xHCI port status into the format that external USB 2.0 or USB + * 3.0 hubs use. + * + * Possible side effects: + * - Mark a port as being done with device resume, + * and ring the endpoint doorbells. + * - Stop the Synopsys redriver Compliance Mode polling. + * - Drop and reacquire the xHCI lock, in order to wait for port resume. + */ +static u32 xhci_get_port_status(struct usb_hcd *hcd, + struct xhci_bus_state *bus_state, + u16 wIndex, u32 raw_port_status, + unsigned long *flags) + __releases(&xhci->lock) + __acquires(&xhci->lock) +{ + u32 status = 0; + struct xhci_hub *rhub; + struct xhci_port *port; + + rhub = xhci_get_rhub(hcd); + port = rhub->ports[wIndex]; + + /* common wPortChange bits */ + if (raw_port_status & PORT_CSC) + status |= USB_PORT_STAT_C_CONNECTION << 16; + if (raw_port_status & PORT_PEC) + status |= USB_PORT_STAT_C_ENABLE << 16; + if ((raw_port_status & PORT_OCC)) + status |= USB_PORT_STAT_C_OVERCURRENT << 16; + if ((raw_port_status & PORT_RC)) + status |= USB_PORT_STAT_C_RESET << 16; + + /* common wPortStatus bits */ + if (raw_port_status & PORT_CONNECT) { + status |= USB_PORT_STAT_CONNECTION; + status |= xhci_port_speed(raw_port_status); + } + if (raw_port_status & PORT_PE) + status |= USB_PORT_STAT_ENABLE; + if (raw_port_status & PORT_OC) + status |= USB_PORT_STAT_OVERCURRENT; + if (raw_port_status & PORT_RESET) + status |= USB_PORT_STAT_RESET; + + /* USB2 and USB3 specific bits, including Port Link State */ + if (hcd->speed >= HCD_USB3) + xhci_get_usb3_port_status(port, &status, raw_port_status); + else + xhci_get_usb2_port_status(port, &status, raw_port_status, + flags); + /* + * Clear stale usb2 resume signalling variables in case port changed + * state during resume signalling. For example on error + */ + if ((bus_state->resume_done[wIndex] || + test_bit(wIndex, &bus_state->resuming_ports)) && + (raw_port_status & PORT_PLS_MASK) != XDEV_U3 && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) { + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + usb_hcd_end_port_resume(&hcd->self, wIndex); + } + + if (bus_state->port_c_suspend & (1 << wIndex)) + status |= USB_PORT_STAT_C_SUSPEND << 16; + + return status; +} + +int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int max_ports; + unsigned long flags; + u32 temp, status; + int retval = 0; + int slot_id; + struct xhci_bus_state *bus_state; + u16 link_state = 0; + u16 wake_mask = 0; + u16 timeout = 0; + u16 test_mode = 0; + struct xhci_hub *rhub; + struct xhci_port **ports; + + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; + bus_state = &rhub->bus_state; + + spin_lock_irqsave(&xhci->lock, flags); + switch (typeReq) { + case GetHubStatus: + /* No power source, over-current reported per port */ + memset(buf, 0, 4); + break; + case GetHubDescriptor: + /* Check to make sure userspace is asking for the USB 3.0 hub + * descriptor for the USB 3.0 roothub. If not, we stall the + * endpoint, like external hubs do. + */ + if (hcd->speed >= HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + xhci_dbg(xhci, "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + xhci_hub_descriptor(hcd, xhci, + (struct usb_hub_descriptor *) buf); + break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if ((wValue & 0xff00) != (USB_DT_BOS << 8)) + goto error; + + if (hcd->speed < HCD_USB3) + goto error; + + retval = xhci_create_usb3x_bos_desc(xhci, buf, wLength); + spin_unlock_irqrestore(&xhci->lock, flags); + return retval; + case GetPortStatus: + if (!wIndex || wIndex > max_ports) + goto error; + wIndex--; + temp = readl(ports[wIndex]->addr); + if (temp == ~(u32)0) { + xhci_hc_died(xhci); + retval = -ENODEV; + break; + } + trace_xhci_get_port_status(wIndex, temp); + status = xhci_get_port_status(hcd, bus_state, wIndex, temp, + &flags); + if (status == 0xffffffff) + goto error; + + xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x", + hcd->self.busnum, wIndex + 1, temp, status); + + put_unaligned(cpu_to_le32(status), (__le32 *) buf); + /* if USB 3.1 extended port status return additional 4 bytes */ + if (wValue == 0x02) { + u32 port_li; + + if (hcd->speed < HCD_USB31 || wLength != 8) { + xhci_err(xhci, "get ext port status invalid parameter\n"); + retval = -EINVAL; + break; + } + port_li = readl(ports[wIndex]->addr + PORTLI); + status = xhci_get_ext_port_status(temp, port_li); + put_unaligned_le32(status, &buf[4]); + } + break; + case SetPortFeature: + if (wValue == USB_PORT_FEAT_LINK_STATE) + link_state = (wIndex & 0xff00) >> 3; + if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) + wake_mask = wIndex & 0xff00; + if (wValue == USB_PORT_FEAT_TEST) + test_mode = (wIndex & 0xff00) >> 8; + /* The MSB of wIndex is the U1/U2 timeout */ + timeout = (wIndex & 0xff00) >> 8; + wIndex &= 0xff; + if (!wIndex || wIndex > max_ports) + goto error; + wIndex--; + temp = readl(ports[wIndex]->addr); + if (temp == ~(u32)0) { + xhci_hc_died(xhci); + retval = -ENODEV; + break; + } + temp = xhci_port_state_to_neutral(temp); + /* FIXME: What new port features do we need to support? */ + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + temp = readl(ports[wIndex]->addr); + if ((temp & PORT_PLS_MASK) != XDEV_U0) { + /* Resume the port to U0 first */ + xhci_set_link_state(xhci, ports[wIndex], + XDEV_U0); + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); + spin_lock_irqsave(&xhci->lock, flags); + } + /* In spec software should not attempt to suspend + * a port unless the port reports that it is in the + * enabled (PED = ‘1’,PLS < ‘3’) state. + */ + temp = readl(ports[wIndex]->addr); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) + || (temp & PORT_PLS_MASK) >= XDEV_U3) { + xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n", + hcd->self.busnum, wIndex + 1); + goto error; + } + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_warn(xhci, "slot_id is zero\n"); + goto error; + } + /* unlock to execute stop endpoint commands */ + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + + xhci_set_link_state(xhci, ports[wIndex], XDEV_U3); + + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); /* wait device to enter */ + spin_lock_irqsave(&xhci->lock, flags); + + temp = readl(ports[wIndex]->addr); + bus_state->suspended_ports |= 1 << wIndex; + break; + case USB_PORT_FEAT_LINK_STATE: + temp = readl(ports[wIndex]->addr); + /* Disable port */ + if (link_state == USB_SS_PORT_LS_SS_DISABLED) { + xhci_dbg(xhci, "Disable port %d-%d\n", + hcd->self.busnum, wIndex + 1); + temp = xhci_port_state_to_neutral(temp); + /* + * Clear all change bits, so that we get a new + * connection event. + */ + temp |= PORT_CSC | PORT_PEC | PORT_WRC | + PORT_OCC | PORT_RC | PORT_PLC | + PORT_CEC; + writel(temp | PORT_PE, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); + break; + } + + /* Put link in RxDetect (enable port) */ + if (link_state == USB_SS_PORT_LS_RX_DETECT) { + xhci_dbg(xhci, "Enable port %d-%d\n", + hcd->self.busnum, wIndex + 1); + xhci_set_link_state(xhci, ports[wIndex], + link_state); + temp = readl(ports[wIndex]->addr); + break; + } + + /* + * For xHCI 1.1 according to section 4.19.1.2.4.1 a + * root hub port's transition to compliance mode upon + * detecting LFPS timeout may be controlled by an + * Compliance Transition Enabled (CTE) flag (not + * software visible). This flag is set by writing 0xA + * to PORTSC PLS field which will allow transition to + * compliance mode the next time LFPS timeout is + * encountered. A warm reset will clear it. + * + * The CTE flag is only supported if the HCCPARAMS2 CTC + * flag is set, otherwise, the compliance substate is + * automatically entered as on 1.0 and prior. + */ + if (link_state == USB_SS_PORT_LS_COMP_MOD) { + if (!HCC2_CTC(xhci->hcc_params2)) { + xhci_dbg(xhci, "CTC flag is 0, port already supports entering compliance mode\n"); + break; + } + + if ((temp & PORT_CONNECT)) { + xhci_warn(xhci, "Can't set compliance mode when port is connected\n"); + goto error; + } + + xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n", + hcd->self.busnum, wIndex + 1); + xhci_set_link_state(xhci, ports[wIndex], + link_state); + + temp = readl(ports[wIndex]->addr); + break; + } + /* Port must be enabled */ + if (!(temp & PORT_PE)) { + retval = -ENODEV; + break; + } + /* Can't set port link state above '3' (U3) */ + if (link_state > USB_SS_PORT_LS_U3) { + xhci_warn(xhci, "Cannot set port %d-%d link state %d\n", + hcd->self.busnum, wIndex + 1, + link_state); + goto error; + } + + /* + * set link to U0, steps depend on current link state. + * U3: set link to U0 and wait for u3exit completion. + * U1/U2: no PLC complete event, only set link to U0. + * Resume/Recovery: device initiated U0, only wait for + * completion + */ + if (link_state == USB_SS_PORT_LS_U0) { + u32 pls = temp & PORT_PLS_MASK; + bool wait_u0 = false; + + /* already in U0 */ + if (pls == XDEV_U0) + break; + if (pls == XDEV_U3 || + pls == XDEV_RESUME || + pls == XDEV_RECOVERY) { + wait_u0 = true; + reinit_completion(&bus_state->u3exit_done[wIndex]); + } + if (pls <= XDEV_U3) /* U1, U2, U3 */ + xhci_set_link_state(xhci, ports[wIndex], + USB_SS_PORT_LS_U0); + if (!wait_u0) { + if (pls > XDEV_U3) + goto error; + break; + } + spin_unlock_irqrestore(&xhci->lock, flags); + if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex], + msecs_to_jiffies(500))) + xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n", + hcd->self.busnum, wIndex + 1); + spin_lock_irqsave(&xhci->lock, flags); + temp = readl(ports[wIndex]->addr); + break; + } + + if (link_state == USB_SS_PORT_LS_U3) { + int retries = 16; + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (slot_id) { + /* unlock to execute stop endpoint + * commands */ + spin_unlock_irqrestore(&xhci->lock, + flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + xhci_set_link_state(xhci, ports[wIndex], USB_SS_PORT_LS_U3); + spin_unlock_irqrestore(&xhci->lock, flags); + while (retries--) { + usleep_range(4000, 8000); + temp = readl(ports[wIndex]->addr); + if ((temp & PORT_PLS_MASK) == XDEV_U3) + break; + } + spin_lock_irqsave(&xhci->lock, flags); + temp = readl(ports[wIndex]->addr); + bus_state->suspended_ports |= 1 << wIndex; + } + break; + case USB_PORT_FEAT_POWER: + /* + * Turn on ports, even if there isn't per-port switching. + * HC will report connect events even before this is set. + * However, hub_wq will ignore the roothub events until + * the roothub is registered. + */ + xhci_set_port_power(xhci, hcd, wIndex, true, &flags); + break; + case USB_PORT_FEAT_RESET: + temp = (temp | PORT_RESET); + writel(temp, ports[wIndex]->addr); + + temp = readl(ports[wIndex]->addr); + xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n", + hcd->self.busnum, wIndex + 1, temp); + break; + case USB_PORT_FEAT_REMOTE_WAKE_MASK: + xhci_set_remote_wake_mask(xhci, ports[wIndex], + wake_mask); + temp = readl(ports[wIndex]->addr); + xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n", + hcd->self.busnum, wIndex + 1, temp); + break; + case USB_PORT_FEAT_BH_PORT_RESET: + temp |= PORT_WR; + writel(temp, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); + break; + case USB_PORT_FEAT_U1_TIMEOUT: + if (hcd->speed < HCD_USB3) + goto error; + temp = readl(ports[wIndex]->addr + PORTPMSC); + temp &= ~PORT_U1_TIMEOUT_MASK; + temp |= PORT_U1_TIMEOUT(timeout); + writel(temp, ports[wIndex]->addr + PORTPMSC); + break; + case USB_PORT_FEAT_U2_TIMEOUT: + if (hcd->speed < HCD_USB3) + goto error; + temp = readl(ports[wIndex]->addr + PORTPMSC); + temp &= ~PORT_U2_TIMEOUT_MASK; + temp |= PORT_U2_TIMEOUT(timeout); + writel(temp, ports[wIndex]->addr + PORTPMSC); + break; + case USB_PORT_FEAT_TEST: + /* 4.19.6 Port Test Modes (USB2 Test Mode) */ + if (hcd->speed != HCD_USB2) + goto error; + if (test_mode > USB_TEST_FORCE_ENABLE || + test_mode < USB_TEST_J) + goto error; + retval = xhci_enter_test_mode(xhci, test_mode, wIndex, + &flags); + break; + default: + goto error; + } + /* unblock any posted writes */ + temp = readl(ports[wIndex]->addr); + break; + case ClearPortFeature: + if (!wIndex || wIndex > max_ports) + goto error; + wIndex--; + temp = readl(ports[wIndex]->addr); + if (temp == ~(u32)0) { + xhci_hc_died(xhci); + retval = -ENODEV; + break; + } + /* FIXME: What new port features do we need to support? */ + temp = xhci_port_state_to_neutral(temp); + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + temp = readl(ports[wIndex]->addr); + xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); + xhci_dbg(xhci, "PORTSC %04x\n", temp); + if (temp & PORT_RESET) + goto error; + if ((temp & PORT_PLS_MASK) == XDEV_U3) { + if ((temp & PORT_PE) == 0) + goto error; + + set_bit(wIndex, &bus_state->resuming_ports); + usb_hcd_start_port_resume(&hcd->self, wIndex); + xhci_set_link_state(xhci, ports[wIndex], + XDEV_RESUME); + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(USB_RESUME_TIMEOUT); + spin_lock_irqsave(&xhci->lock, flags); + xhci_set_link_state(xhci, ports[wIndex], + XDEV_U0); + clear_bit(wIndex, &bus_state->resuming_ports); + usb_hcd_end_port_resume(&hcd->self, wIndex); + } + bus_state->port_c_suspend |= 1 << wIndex; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + goto error; + } + xhci_ring_device(xhci, slot_id); + break; + case USB_PORT_FEAT_C_SUSPEND: + bus_state->port_c_suspend &= ~(1 << wIndex); + fallthrough; + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_BH_PORT_RESET: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_PORT_LINK_STATE: + case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: + xhci_clear_port_change_bit(xhci, wValue, wIndex, + ports[wIndex]->addr, temp); + break; + case USB_PORT_FEAT_ENABLE: + xhci_disable_port(hcd, xhci, wIndex, + ports[wIndex]->addr, temp); + break; + case USB_PORT_FEAT_POWER: + xhci_set_port_power(xhci, hcd, wIndex, false, &flags); + break; + case USB_PORT_FEAT_TEST: + retval = xhci_exit_test_mode(xhci); + break; + default: + goto error; + } + break; + default: +error: + /* "stall" on error */ + retval = -EPIPE; + } + spin_unlock_irqrestore(&xhci->lock, flags); + return retval; +} + +/* + * Returns 0 if the status hasn't changed, or the number of bytes in buf. + * Ports are 0-indexed from the HCD point of view, + * and 1-indexed from the USB core pointer of view. + * + * Note that the status change bits will be cleared as soon as a port status + * change event is generated, so we use the saved status from that event. + */ +int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + unsigned long flags; + u32 temp, status; + u32 mask; + int i, retval; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int max_ports; + struct xhci_bus_state *bus_state; + bool reset_change = false; + struct xhci_hub *rhub; + struct xhci_port **ports; + + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; + bus_state = &rhub->bus_state; + + /* Initial status is no changes */ + retval = (max_ports + 8) / 8; + memset(buf, 0, retval); + + /* + * Inform the usbcore about resume-in-progress by returning + * a non-zero value even if there are no status changes. + */ + spin_lock_irqsave(&xhci->lock, flags); + + status = bus_state->resuming_ports; + + /* + * SS devices are only visible to roothub after link training completes. + * Keep polling roothubs for a grace period after xHC start + */ + if (xhci->run_graceperiod) { + if (time_before(jiffies, xhci->run_graceperiod)) + status = 1; + else + xhci->run_graceperiod = 0; + } + + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; + + /* For each port, did anything change? If so, set that bit in buf. */ + for (i = 0; i < max_ports; i++) { + temp = readl(ports[i]->addr); + if (temp == ~(u32)0) { + xhci_hc_died(xhci); + retval = -ENODEV; + break; + } + trace_xhci_hub_status_data(i, temp); + + if ((temp & mask) != 0 || + (bus_state->port_c_suspend & 1 << i) || + (bus_state->resume_done[i] && time_after_eq( + jiffies, bus_state->resume_done[i]))) { + buf[(i + 1) / 8] |= 1 << (i + 1) % 8; + status = 1; + } + if ((temp & PORT_RC)) + reset_change = true; + if (temp & PORT_OC) + status = 1; + } + if (!status && !reset_change) { + xhci_dbg(xhci, "%s: stopping usb%d port polling\n", + __func__, hcd->self.busnum); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + } + spin_unlock_irqrestore(&xhci->lock, flags); + return status ? retval : 0; +} + +#ifdef CONFIG_PM + +int xhci_bus_suspend(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int max_ports, port_index; + struct xhci_bus_state *bus_state; + unsigned long flags; + struct xhci_hub *rhub; + struct xhci_port **ports; + u32 portsc_buf[USB_MAXCHILDREN]; + bool wake_enabled; + + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; + bus_state = &rhub->bus_state; + wake_enabled = hcd->self.root_hub->do_remote_wakeup; + + spin_lock_irqsave(&xhci->lock, flags); + + if (wake_enabled) { + if (bus_state->resuming_ports || /* USB2 */ + bus_state->port_remote_wakeup) { /* USB3 */ + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "usb%d bus suspend to fail because a port is resuming\n", + hcd->self.busnum); + return -EBUSY; + } + } + /* + * Prepare ports for suspend, but don't write anything before all ports + * are checked and we know bus suspend can proceed + */ + bus_state->bus_suspended = 0; + port_index = max_ports; + while (port_index--) { + u32 t1, t2; + int retries = 10; +retry: + t1 = readl(ports[port_index]->addr); + t2 = xhci_port_state_to_neutral(t1); + portsc_buf[port_index] = 0; + + /* + * Give a USB3 port in link training time to finish, but don't + * prevent suspend as port might be stuck + */ + if ((hcd->speed >= HCD_USB3) && retries-- && + (t1 & PORT_PLS_MASK) == XDEV_POLLING) { + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(XHCI_PORT_POLLING_LFPS_TIME); + spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n", + hcd->self.busnum, port_index + 1); + goto retry; + } + /* bail out if port detected a over-current condition */ + if (t1 & PORT_OC) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n"); + return -EBUSY; + } + /* suspend ports in U0, or bail out for new connect changes */ + if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { + if ((t1 & PORT_CSC) && wake_enabled) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port connect change\n"); + return -EBUSY; + } + xhci_dbg(xhci, "port %d-%d not suspended\n", + hcd->self.busnum, port_index + 1); + t2 &= ~PORT_PLS_MASK; + t2 |= PORT_LINK_STROBE | XDEV_U3; + set_bit(port_index, &bus_state->bus_suspended); + } + /* USB core sets remote wake mask for USB 3.0 hubs, + * including the USB 3.0 roothub, but only if CONFIG_PM + * is enabled, so also enable remote wake here. + */ + if (wake_enabled) { + if (t1 & PORT_CONNECT) { + t2 |= PORT_WKOC_E | PORT_WKDISC_E; + t2 &= ~PORT_WKCONN_E; + } else { + t2 |= PORT_WKOC_E | PORT_WKCONN_E; + t2 &= ~PORT_WKDISC_E; + } + + if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) && + (hcd->speed < HCD_USB3)) { + if (usb_amd_pt_check_port(hcd->self.controller, + port_index)) + t2 &= ~PORT_WAKE_BITS; + } + } else + t2 &= ~PORT_WAKE_BITS; + + t1 = xhci_port_state_to_neutral(t1); + if (t1 != t2) + portsc_buf[port_index] = t2; + } + + /* write port settings, stopping and suspending ports if needed */ + port_index = max_ports; + while (port_index--) { + if (!portsc_buf[port_index]) + continue; + if (test_bit(port_index, &bus_state->bus_suspended)) { + int slot_id; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); + if (slot_id) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + } + writel(portsc_buf[port_index], ports[port_index]->addr); + } + hcd->state = HC_STATE_SUSPENDED; + bus_state->next_statechange = jiffies + msecs_to_jiffies(10); + spin_unlock_irqrestore(&xhci->lock, flags); + + if (bus_state->bus_suspended) + usleep_range(5000, 10000); + + return 0; +} + +/* + * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3. + * warm reset a USB3 device stuck in polling or compliance mode after resume. + * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 + */ +static bool xhci_port_missing_cas_quirk(struct xhci_port *port) +{ + u32 portsc; + + portsc = readl(port->addr); + + /* if any of these are set we are not stuck */ + if (portsc & (PORT_CONNECT | PORT_CAS)) + return false; + + if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) && + ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE)) + return false; + + /* clear wakeup/change bits, and do a warm port reset */ + portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + portsc |= PORT_WR; + writel(portsc, port->addr); + /* flush write */ + readl(port->addr); + return true; +} + +int xhci_bus_resume(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_bus_state *bus_state; + unsigned long flags; + int max_ports, port_index; + int slot_id; + int sret; + u32 next_state; + u32 temp, portsc; + struct xhci_hub *rhub; + struct xhci_port **ports; + + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; + bus_state = &rhub->bus_state; + + if (time_before(jiffies, bus_state->next_statechange)) + msleep(5); + + spin_lock_irqsave(&xhci->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) { + spin_unlock_irqrestore(&xhci->lock, flags); + return -ESHUTDOWN; + } + + /* delay the irqs */ + temp = readl(&xhci->op_regs->command); + temp &= ~CMD_EIE; + writel(temp, &xhci->op_regs->command); + + /* bus specific resume for ports we suspended at bus_suspend */ + if (hcd->speed >= HCD_USB3) + next_state = XDEV_U0; + else + next_state = XDEV_RESUME; + + port_index = max_ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + + /* warm reset CAS limited ports stuck in polling/compliance */ + if ((xhci->quirks & XHCI_MISSING_CAS) && + (hcd->speed >= HCD_USB3) && + xhci_port_missing_cas_quirk(ports[port_index])) { + xhci_dbg(xhci, "reset stuck port %d-%d\n", + hcd->self.busnum, port_index + 1); + clear_bit(port_index, &bus_state->bus_suspended); + continue; + } + /* resume if we suspended the link, and it is still suspended */ + if (test_bit(port_index, &bus_state->bus_suspended)) + switch (portsc & PORT_PLS_MASK) { + case XDEV_U3: + portsc = xhci_port_state_to_neutral(portsc); + portsc &= ~PORT_PLS_MASK; + portsc |= PORT_LINK_STROBE | next_state; + break; + case XDEV_RESUME: + /* resume already initiated */ + break; + default: + /* not in a resumeable state, ignore it */ + clear_bit(port_index, + &bus_state->bus_suspended); + break; + } + /* disable wake for all ports, write new link state if needed */ + portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + writel(portsc, ports[port_index]->addr); + } + + /* USB2 specific resume signaling delay and U0 link state transition */ + if (hcd->speed < HCD_USB3) { + if (bus_state->bus_suspended) { + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(USB_RESUME_TIMEOUT); + spin_lock_irqsave(&xhci->lock, flags); + } + for_each_set_bit(port_index, &bus_state->bus_suspended, + BITS_PER_LONG) { + /* Clear PLC to poll it later for U0 transition */ + xhci_test_and_clear_bit(xhci, ports[port_index], + PORT_PLC); + xhci_set_link_state(xhci, ports[port_index], XDEV_U0); + } + } + + /* poll for U0 link state complete, both USB2 and USB3 */ + for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { + sret = xhci_handshake(ports[port_index]->addr, PORT_PLC, + PORT_PLC, 10 * 1000); + if (sret) { + xhci_warn(xhci, "port %d-%d resume PLC timeout\n", + hcd->self.busnum, port_index + 1); + continue; + } + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); + if (slot_id) + xhci_ring_device(xhci, slot_id); + } + (void) readl(&xhci->op_regs->command); + + bus_state->next_statechange = jiffies + msecs_to_jiffies(5); + /* re-enable irqs */ + temp = readl(&xhci->op_regs->command); + temp |= CMD_EIE; + writel(temp, &xhci->op_regs->command); + temp = readl(&xhci->op_regs->command); + + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; +} + +unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd) +{ + struct xhci_hub *rhub = xhci_get_rhub(hcd); + + /* USB3 port wakeups are reported via usb_wakeup_notification() */ + return rhub->bus_state.resuming_ports; /* USB2 ports only */ +} + +#endif /* CONFIG_PM */ |