diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/misc/emi62.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/misc/emi62.c')
-rw-r--r-- | drivers/usb/misc/emi62.c | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c new file mode 100644 index 000000000..3eea60437 --- /dev/null +++ b/drivers/usb/misc/emi62.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Emagic EMI 2|6 usb audio interface firmware loader. + * Copyright (C) 2002 + * Tapio Laxström (tapio.laxstrom@iptime.fi) + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/ihex.h> + +/* include firmware (variables)*/ + +/* FIXME: This is quick and dirty solution! */ +#define SPDIF /* if you want SPDIF comment next line */ +//#undef SPDIF /* if you want MIDI uncomment this line */ + +#ifdef SPDIF +#define FIRMWARE_FW "emi62/spdif.fw" +#else +#define FIRMWARE_FW "emi62/midi.fw" +#endif + +#define EMI62_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ +#define EMI62_PRODUCT_ID 0x0110 /* EMI 6|2m without firmware */ + +#define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ +#define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ +#define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ +#define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ +#define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ +#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) + +static int emi62_writememory(struct usb_device *dev, int address, + const unsigned char *data, int length, + __u8 bRequest); +static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit); +static int emi62_load_firmware (struct usb_device *dev); +static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id); +static void emi62_disconnect(struct usb_interface *intf); + +/* thanks to drivers/usb/serial/keyspan_pda.c code */ +static int emi62_writememory(struct usb_device *dev, int address, + const unsigned char *data, int length, + __u8 request) +{ + int result; + unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); + + if (!buffer) { + dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); + return -ENOMEM; + } + /* Note: usb_control_msg returns negative value on error or length of the + * data that was written! */ + result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); + kfree (buffer); + return result; +} + +/* thanks to drivers/usb/serial/keyspan_pda.c code */ +static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit) +{ + int response; + dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); + + response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); + if (response < 0) + dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); + return response; +} + +#define FW_LOAD_SIZE 1023 + +static int emi62_load_firmware (struct usb_device *dev) +{ + const struct firmware *loader_fw = NULL; + const struct firmware *bitstream_fw = NULL; + const struct firmware *firmware_fw = NULL; + const struct ihex_binrec *rec; + int err = -ENOMEM; + int i; + __u32 addr; /* Address to write */ + __u8 *buf; + + dev_dbg(&dev->dev, "load_firmware\n"); + buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); + if (!buf) + goto wraperr; + + err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev); + if (err) + goto nofw; + + err = request_ihex_firmware(&bitstream_fw, "emi62/bitstream.fw", + &dev->dev); + if (err) + goto nofw; + + err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev); + if (err) { + nofw: + goto wraperr; + } + + /* Assert reset (stop the CPU in the EMI) */ + err = emi62_set_reset(dev,1); + if (err < 0) + goto wraperr; + + rec = (const struct ihex_binrec *)loader_fw->data; + + /* 1. We need to put the loader for the FPGA into the EZ-USB */ + while (rec) { + err = emi62_writememory(dev, be32_to_cpu(rec->addr), + rec->data, be16_to_cpu(rec->len), + ANCHOR_LOAD_INTERNAL); + if (err < 0) + goto wraperr; + rec = ihex_next_binrec(rec); + } + + /* De-assert reset (let the CPU run) */ + err = emi62_set_reset(dev,0); + if (err < 0) + goto wraperr; + msleep(250); /* let device settle */ + + /* 2. We upload the FPGA firmware into the EMI + * Note: collect up to 1023 (yes!) bytes and send them with + * a single request. This is _much_ faster! */ + rec = (const struct ihex_binrec *)bitstream_fw->data; + do { + i = 0; + addr = be32_to_cpu(rec->addr); + + /* intel hex records are terminated with type 0 element */ + while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) { + memcpy(buf + i, rec->data, be16_to_cpu(rec->len)); + i += be16_to_cpu(rec->len); + rec = ihex_next_binrec(rec); + } + err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); + if (err < 0) + goto wraperr; + } while (rec); + + /* Assert reset (stop the CPU in the EMI) */ + err = emi62_set_reset(dev,1); + if (err < 0) + goto wraperr; + + /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ + for (rec = (const struct ihex_binrec *)loader_fw->data; + rec; rec = ihex_next_binrec(rec)) { + err = emi62_writememory(dev, be32_to_cpu(rec->addr), + rec->data, be16_to_cpu(rec->len), + ANCHOR_LOAD_INTERNAL); + if (err < 0) + goto wraperr; + } + + /* De-assert reset (let the CPU run) */ + err = emi62_set_reset(dev,0); + if (err < 0) + goto wraperr; + msleep(250); /* let device settle */ + + /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ + + for (rec = (const struct ihex_binrec *)firmware_fw->data; + rec; rec = ihex_next_binrec(rec)) { + if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) { + err = emi62_writememory(dev, be32_to_cpu(rec->addr), + rec->data, be16_to_cpu(rec->len), + ANCHOR_LOAD_EXTERNAL); + if (err < 0) + goto wraperr; + } + } + + /* Assert reset (stop the CPU in the EMI) */ + err = emi62_set_reset(dev,1); + if (err < 0) + goto wraperr; + + for (rec = (const struct ihex_binrec *)firmware_fw->data; + rec; rec = ihex_next_binrec(rec)) { + if (INTERNAL_RAM(be32_to_cpu(rec->addr))) { + err = emi62_writememory(dev, be32_to_cpu(rec->addr), + rec->data, be16_to_cpu(rec->len), + ANCHOR_LOAD_EXTERNAL); + if (err < 0) + goto wraperr; + } + } + + /* De-assert reset (let the CPU run) */ + err = emi62_set_reset(dev,0); + if (err < 0) + goto wraperr; + msleep(250); /* let device settle */ + + release_firmware(loader_fw); + release_firmware(bitstream_fw); + release_firmware(firmware_fw); + + kfree(buf); + + /* return 1 to fail the driver inialization + * and give real driver change to load */ + return 1; + +wraperr: + if (err < 0) + dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", + __func__, err); + release_firmware(loader_fw); + release_firmware(bitstream_fw); + release_firmware(firmware_fw); + + kfree(buf); + dev_err(&dev->dev, "Error\n"); + return err; +} + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, id_table); + +static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + dev_dbg(&intf->dev, "emi62_probe\n"); + + dev_info(&intf->dev, "%s start\n", __func__); + + emi62_load_firmware(dev); + + /* do not return the driver context, let real audio driver do that */ + return -EIO; +} + +static void emi62_disconnect(struct usb_interface *intf) +{ +} + +static struct usb_driver emi62_driver = { + .name = "emi62 - firmware loader", + .probe = emi62_probe, + .disconnect = emi62_disconnect, + .id_table = id_table, +}; + +module_usb_driver(emi62_driver); + +MODULE_AUTHOR("Tapio Laxström"); +MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader."); +MODULE_LICENSE("GPL"); + +MODULE_FIRMWARE("emi62/loader.fw"); +MODULE_FIRMWARE("emi62/bitstream.fw"); +MODULE_FIRMWARE(FIRMWARE_FW); +/* vi:ai:syntax=c:sw=8:ts=8:tw=80 + */ |