diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/musb/sunxi.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/musb/sunxi.c')
-rw-r--r-- | drivers/usb/musb/sunxi.c | 834 |
1 files changed, 834 insertions, 0 deletions
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c new file mode 100644 index 000000000..7f9a999cd --- /dev/null +++ b/drivers/usb/musb/sunxi.c @@ -0,0 +1,834 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Allwinner sun4i MUSB Glue Layer + * + * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/extcon.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy-sun4i-usb.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/soc/sunxi/sunxi_sram.h> +#include <linux/usb/musb.h> +#include <linux/usb/of.h> +#include <linux/usb/usb_phy_generic.h> +#include <linux/workqueue.h> +#include "musb_core.h" + +/* + * Register offsets, note sunxi musb has a different layout then most + * musb implementations, we translate the layout in musb_readb & friends. + */ +#define SUNXI_MUSB_POWER 0x0040 +#define SUNXI_MUSB_DEVCTL 0x0041 +#define SUNXI_MUSB_INDEX 0x0042 +#define SUNXI_MUSB_VEND0 0x0043 +#define SUNXI_MUSB_INTRTX 0x0044 +#define SUNXI_MUSB_INTRRX 0x0046 +#define SUNXI_MUSB_INTRTXE 0x0048 +#define SUNXI_MUSB_INTRRXE 0x004a +#define SUNXI_MUSB_INTRUSB 0x004c +#define SUNXI_MUSB_INTRUSBE 0x0050 +#define SUNXI_MUSB_FRAME 0x0054 +#define SUNXI_MUSB_TXFIFOSZ 0x0090 +#define SUNXI_MUSB_TXFIFOADD 0x0092 +#define SUNXI_MUSB_RXFIFOSZ 0x0094 +#define SUNXI_MUSB_RXFIFOADD 0x0096 +#define SUNXI_MUSB_FADDR 0x0098 +#define SUNXI_MUSB_TXFUNCADDR 0x0098 +#define SUNXI_MUSB_TXHUBADDR 0x009a +#define SUNXI_MUSB_TXHUBPORT 0x009b +#define SUNXI_MUSB_RXFUNCADDR 0x009c +#define SUNXI_MUSB_RXHUBADDR 0x009e +#define SUNXI_MUSB_RXHUBPORT 0x009f +#define SUNXI_MUSB_CONFIGDATA 0x00c0 + +/* VEND0 bits */ +#define SUNXI_MUSB_VEND0_PIO_MODE 0 + +/* flags */ +#define SUNXI_MUSB_FL_ENABLED 0 +#define SUNXI_MUSB_FL_HOSTMODE 1 +#define SUNXI_MUSB_FL_HOSTMODE_PEND 2 +#define SUNXI_MUSB_FL_VBUS_ON 3 +#define SUNXI_MUSB_FL_PHY_ON 4 +#define SUNXI_MUSB_FL_HAS_SRAM 5 +#define SUNXI_MUSB_FL_HAS_RESET 6 +#define SUNXI_MUSB_FL_NO_CONFIGDATA 7 +#define SUNXI_MUSB_FL_PHY_MODE_PEND 8 + +/* Our read/write methods need access and do not get passed in a musb ref :| */ +static struct musb *sunxi_musb; + +struct sunxi_glue { + struct device *dev; + struct musb *musb; + struct platform_device *musb_pdev; + struct clk *clk; + struct reset_control *rst; + struct phy *phy; + struct platform_device *usb_phy; + struct usb_phy *xceiv; + enum phy_mode phy_mode; + unsigned long flags; + struct work_struct work; + struct extcon_dev *extcon; + struct notifier_block host_nb; +}; + +/* phy_power_on / off may sleep, so we use a workqueue */ +static void sunxi_musb_work(struct work_struct *work) +{ + struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work); + bool vbus_on, phy_on; + + if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) + return; + + if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { + struct musb *musb = glue->musb; + unsigned long flags; + u8 devctl; + + spin_lock_irqsave(&musb->lock, flags); + + devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); + if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { + set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + MUSB_HST_MODE(musb); + devctl |= MUSB_DEVCTL_SESSION; + } else { + clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + devctl &= ~MUSB_DEVCTL_SESSION; + } + writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL); + + spin_unlock_irqrestore(&musb->lock, flags); + } + + vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); + + if (phy_on != vbus_on) { + if (vbus_on) { + phy_power_on(glue->phy); + set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); + } else { + phy_power_off(glue->phy); + clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); + } + } + + if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags)) + phy_set_mode(glue->phy, glue->phy_mode); +} + +static void sunxi_musb_set_vbus(struct musb *musb, int is_on) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + if (is_on) { + set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + } else { + clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + } + + schedule_work(&glue->work); +} + +static void sunxi_musb_pre_root_reset_end(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + sun4i_usb_phy_set_squelch_detect(glue->phy, false); +} + +static void sunxi_musb_post_root_reset_end(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + sun4i_usb_phy_set_squelch_detect(glue->phy, true); +} + +static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) +{ + struct musb *musb = __hci; + unsigned long flags; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB); + if (musb->int_usb) + writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB); + + if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { + /* ep0 FADDR must be 0 when (re)entering peripheral mode */ + musb_ep_select(musb->mregs, 0); + musb_writeb(musb->mregs, MUSB_FADDR, 0); + } + + musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); + if (musb->int_tx) + writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); + + musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX); + if (musb->int_rx) + writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX); + + musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return IRQ_HANDLED; +} + +static int sunxi_musb_host_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb); + + if (event) + set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); + else + clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); + + set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags); + schedule_work(&glue->work); + + return NOTIFY_DONE; +} + +static int sunxi_musb_init(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + int ret; + + sunxi_musb = musb; + musb->phy = glue->phy; + musb->xceiv = glue->xceiv; + + if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) { + ret = sunxi_sram_claim(musb->controller->parent); + if (ret) + return ret; + } + + ret = clk_prepare_enable(glue->clk); + if (ret) + goto error_sram_release; + + if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { + ret = reset_control_deassert(glue->rst); + if (ret) + goto error_clk_disable; + } + + writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); + + /* Register notifier before calling phy_init() */ + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, + EXTCON_USB_HOST, &glue->host_nb); + if (ret) + goto error_reset_assert; + + ret = phy_init(glue->phy); + if (ret) + goto error_reset_assert; + + musb->isr = sunxi_musb_interrupt; + + /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ + pm_runtime_get(musb->controller); + + return 0; + +error_reset_assert: + if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) + reset_control_assert(glue->rst); +error_clk_disable: + clk_disable_unprepare(glue->clk); +error_sram_release: + if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) + sunxi_sram_release(musb->controller->parent); + return ret; +} + +static int sunxi_musb_exit(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + pm_runtime_put(musb->controller); + + cancel_work_sync(&glue->work); + if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags)) + phy_power_off(glue->phy); + + phy_exit(glue->phy); + + if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) + reset_control_assert(glue->rst); + + clk_disable_unprepare(glue->clk); + if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) + sunxi_sram_release(musb->controller->parent); + + devm_usb_put_phy(glue->dev, glue->xceiv); + + return 0; +} + +static void sunxi_musb_enable(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + glue->musb = musb; + + /* musb_core does not call us in a balanced manner */ + if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) + return; + + schedule_work(&glue->work); +} + +static void sunxi_musb_disable(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags); +} + +static struct dma_controller * +sunxi_musb_dma_controller_create(struct musb *musb, void __iomem *base) +{ + return NULL; +} + +static void sunxi_musb_dma_controller_destroy(struct dma_controller *c) +{ +} + +static int sunxi_musb_set_mode(struct musb *musb, u8 mode) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + enum phy_mode new_mode; + + switch (mode) { + case MUSB_HOST: + new_mode = PHY_MODE_USB_HOST; + break; + case MUSB_PERIPHERAL: + new_mode = PHY_MODE_USB_DEVICE; + break; + case MUSB_OTG: + new_mode = PHY_MODE_USB_OTG; + break; + default: + dev_err(musb->controller->parent, + "Error requested mode not supported by this kernel\n"); + return -EINVAL; + } + + if (glue->phy_mode == new_mode) + return 0; + + if (musb->port_mode != MUSB_OTG) { + dev_err(musb->controller->parent, + "Error changing modes is only supported in dual role mode\n"); + return -EINVAL; + } + + if (musb->port1_status & USB_PORT_STAT_ENABLE) + musb_root_disconnect(musb); + + /* + * phy_set_mode may sleep, and we're called with a spinlock held, + * so let sunxi_musb_work deal with it. + */ + glue->phy_mode = new_mode; + set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); + schedule_work(&glue->work); + + return 0; +} + +static int sunxi_musb_recover(struct musb *musb) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + + /* + * Schedule a phy_set_mode with the current glue->phy_mode value, + * this will force end the current session. + */ + set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); + schedule_work(&glue->work); + + return 0; +} + +/* + * sunxi musb register layout + * 0x00 - 0x17 fifo regs, 1 long per fifo + * 0x40 - 0x57 generic control regs (power - frame) + * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed) + * 0x90 - 0x97 fifo control regs (indexed) + * 0x98 - 0x9f multipoint / busctl regs (indexed) + * 0xc0 configdata reg + */ + +static u32 sunxi_musb_fifo_offset(u8 epnum) +{ + return (epnum * 4); +} + +static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset) +{ + WARN_ONCE(offset != 0, + "sunxi_musb_ep_offset called with non 0 offset\n"); + + return 0x80; /* indexed, so ignore epnum */ +} + +static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) +{ + return SUNXI_MUSB_TXFUNCADDR + offset; +} + +static u8 sunxi_musb_readb(void __iomem *addr, u32 offset) +{ + struct sunxi_glue *glue; + + if (addr == sunxi_musb->mregs) { + /* generic control or fifo control reg access */ + switch (offset) { + case MUSB_FADDR: + return readb(addr + SUNXI_MUSB_FADDR); + case MUSB_POWER: + return readb(addr + SUNXI_MUSB_POWER); + case MUSB_INTRUSB: + return readb(addr + SUNXI_MUSB_INTRUSB); + case MUSB_INTRUSBE: + return readb(addr + SUNXI_MUSB_INTRUSBE); + case MUSB_INDEX: + return readb(addr + SUNXI_MUSB_INDEX); + case MUSB_TESTMODE: + return 0; /* No testmode on sunxi */ + case MUSB_DEVCTL: + return readb(addr + SUNXI_MUSB_DEVCTL); + case MUSB_TXFIFOSZ: + return readb(addr + SUNXI_MUSB_TXFIFOSZ); + case MUSB_RXFIFOSZ: + return readb(addr + SUNXI_MUSB_RXFIFOSZ); + case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */ + glue = dev_get_drvdata(sunxi_musb->controller->parent); + /* A33 saves a reg, and we get to hardcode this */ + if (test_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, + &glue->flags)) + return 0xde; + + return readb(addr + SUNXI_MUSB_CONFIGDATA); + case MUSB_ULPI_BUSCONTROL: + dev_warn(sunxi_musb->controller->parent, + "sunxi-musb does not have ULPI bus control register\n"); + return 0; + /* Offset for these is fixed by sunxi_musb_busctl_offset() */ + case SUNXI_MUSB_TXFUNCADDR: + case SUNXI_MUSB_TXHUBADDR: + case SUNXI_MUSB_TXHUBPORT: + case SUNXI_MUSB_RXFUNCADDR: + case SUNXI_MUSB_RXHUBADDR: + case SUNXI_MUSB_RXHUBPORT: + /* multipoint / busctl reg access */ + return readb(addr + offset); + default: + dev_err(sunxi_musb->controller->parent, + "Error unknown readb offset %u\n", offset); + return 0; + } + } else if (addr == (sunxi_musb->mregs + 0x80)) { + /* ep control reg access */ + /* sunxi has a 2 byte hole before the txtype register */ + if (offset >= MUSB_TXTYPE) + offset += 2; + return readb(addr + offset); + } + + dev_err(sunxi_musb->controller->parent, + "Error unknown readb at 0x%x bytes offset\n", + (int)(addr - sunxi_musb->mregs)); + return 0; +} + +static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) +{ + if (addr == sunxi_musb->mregs) { + /* generic control or fifo control reg access */ + switch (offset) { + case MUSB_FADDR: + return writeb(data, addr + SUNXI_MUSB_FADDR); + case MUSB_POWER: + return writeb(data, addr + SUNXI_MUSB_POWER); + case MUSB_INTRUSB: + return writeb(data, addr + SUNXI_MUSB_INTRUSB); + case MUSB_INTRUSBE: + return writeb(data, addr + SUNXI_MUSB_INTRUSBE); + case MUSB_INDEX: + return writeb(data, addr + SUNXI_MUSB_INDEX); + case MUSB_TESTMODE: + if (data) + dev_warn(sunxi_musb->controller->parent, + "sunxi-musb does not have testmode\n"); + return; + case MUSB_DEVCTL: + return writeb(data, addr + SUNXI_MUSB_DEVCTL); + case MUSB_TXFIFOSZ: + return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ); + case MUSB_RXFIFOSZ: + return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ); + case MUSB_ULPI_BUSCONTROL: + dev_warn(sunxi_musb->controller->parent, + "sunxi-musb does not have ULPI bus control register\n"); + return; + /* Offset for these is fixed by sunxi_musb_busctl_offset() */ + case SUNXI_MUSB_TXFUNCADDR: + case SUNXI_MUSB_TXHUBADDR: + case SUNXI_MUSB_TXHUBPORT: + case SUNXI_MUSB_RXFUNCADDR: + case SUNXI_MUSB_RXHUBADDR: + case SUNXI_MUSB_RXHUBPORT: + /* multipoint / busctl reg access */ + return writeb(data, addr + offset); + default: + dev_err(sunxi_musb->controller->parent, + "Error unknown writeb offset %u\n", offset); + return; + } + } else if (addr == (sunxi_musb->mregs + 0x80)) { + /* ep control reg access */ + if (offset >= MUSB_TXTYPE) + offset += 2; + return writeb(data, addr + offset); + } + + dev_err(sunxi_musb->controller->parent, + "Error unknown writeb at 0x%x bytes offset\n", + (int)(addr - sunxi_musb->mregs)); +} + +static u16 sunxi_musb_readw(void __iomem *addr, u32 offset) +{ + if (addr == sunxi_musb->mregs) { + /* generic control or fifo control reg access */ + switch (offset) { + case MUSB_INTRTX: + return readw(addr + SUNXI_MUSB_INTRTX); + case MUSB_INTRRX: + return readw(addr + SUNXI_MUSB_INTRRX); + case MUSB_INTRTXE: + return readw(addr + SUNXI_MUSB_INTRTXE); + case MUSB_INTRRXE: + return readw(addr + SUNXI_MUSB_INTRRXE); + case MUSB_FRAME: + return readw(addr + SUNXI_MUSB_FRAME); + case MUSB_TXFIFOADD: + return readw(addr + SUNXI_MUSB_TXFIFOADD); + case MUSB_RXFIFOADD: + return readw(addr + SUNXI_MUSB_RXFIFOADD); + case MUSB_HWVERS: + return 0; /* sunxi musb version is not known */ + default: + dev_err(sunxi_musb->controller->parent, + "Error unknown readw offset %u\n", offset); + return 0; + } + } else if (addr == (sunxi_musb->mregs + 0x80)) { + /* ep control reg access */ + return readw(addr + offset); + } + + dev_err(sunxi_musb->controller->parent, + "Error unknown readw at 0x%x bytes offset\n", + (int)(addr - sunxi_musb->mregs)); + return 0; +} + +static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data) +{ + if (addr == sunxi_musb->mregs) { + /* generic control or fifo control reg access */ + switch (offset) { + case MUSB_INTRTX: + return writew(data, addr + SUNXI_MUSB_INTRTX); + case MUSB_INTRRX: + return writew(data, addr + SUNXI_MUSB_INTRRX); + case MUSB_INTRTXE: + return writew(data, addr + SUNXI_MUSB_INTRTXE); + case MUSB_INTRRXE: + return writew(data, addr + SUNXI_MUSB_INTRRXE); + case MUSB_FRAME: + return writew(data, addr + SUNXI_MUSB_FRAME); + case MUSB_TXFIFOADD: + return writew(data, addr + SUNXI_MUSB_TXFIFOADD); + case MUSB_RXFIFOADD: + return writew(data, addr + SUNXI_MUSB_RXFIFOADD); + default: + dev_err(sunxi_musb->controller->parent, + "Error unknown writew offset %u\n", offset); + return; + } + } else if (addr == (sunxi_musb->mregs + 0x80)) { + /* ep control reg access */ + return writew(data, addr + offset); + } + + dev_err(sunxi_musb->controller->parent, + "Error unknown writew at 0x%x bytes offset\n", + (int)(addr - sunxi_musb->mregs)); +} + +static const struct musb_platform_ops sunxi_musb_ops = { + .quirks = MUSB_INDEXED_EP, + .init = sunxi_musb_init, + .exit = sunxi_musb_exit, + .enable = sunxi_musb_enable, + .disable = sunxi_musb_disable, + .fifo_offset = sunxi_musb_fifo_offset, + .ep_offset = sunxi_musb_ep_offset, + .busctl_offset = sunxi_musb_busctl_offset, + .readb = sunxi_musb_readb, + .writeb = sunxi_musb_writeb, + .readw = sunxi_musb_readw, + .writew = sunxi_musb_writew, + .dma_init = sunxi_musb_dma_controller_create, + .dma_exit = sunxi_musb_dma_controller_destroy, + .set_mode = sunxi_musb_set_mode, + .recover = sunxi_musb_recover, + .set_vbus = sunxi_musb_set_vbus, + .pre_root_reset_end = sunxi_musb_pre_root_reset_end, + .post_root_reset_end = sunxi_musb_post_root_reset_end, +}; + +/* Allwinner OTG supports up to 5 endpoints */ +#define SUNXI_MUSB_MAX_EP_NUM 6 +#define SUNXI_MUSB_RAM_BITS 11 + +static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { + MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), +}; + +/* H3/V3s OTG supports only 4 endpoints */ +#define SUNXI_MUSB_MAX_EP_NUM_H3 5 + +static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = { + MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), +}; + +static const struct musb_hdrc_config sunxi_musb_hdrc_config = { + .fifo_cfg = sunxi_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), + .multipoint = true, + .dyn_fifo = true, + .num_eps = SUNXI_MUSB_MAX_EP_NUM, + .ram_bits = SUNXI_MUSB_RAM_BITS, +}; + +static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { + .fifo_cfg = sunxi_musb_mode_cfg_h3, + .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3), + .multipoint = true, + .dyn_fifo = true, + .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3, + .ram_bits = SUNXI_MUSB_RAM_BITS, +}; + + +static int sunxi_musb_probe(struct platform_device *pdev) +{ + struct musb_hdrc_platform_data pdata; + struct platform_device_info pinfo; + struct sunxi_glue *glue; + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) { + dev_err(&pdev->dev, "Error no device tree node found\n"); + return -EINVAL; + } + + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + memset(&pdata, 0, sizeof(pdata)); + switch (usb_get_dr_mode(&pdev->dev)) { +#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST + case USB_DR_MODE_HOST: + pdata.mode = MUSB_HOST; + glue->phy_mode = PHY_MODE_USB_HOST; + break; +#endif +#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET + case USB_DR_MODE_PERIPHERAL: + pdata.mode = MUSB_PERIPHERAL; + glue->phy_mode = PHY_MODE_USB_DEVICE; + break; +#endif +#ifdef CONFIG_USB_MUSB_DUAL_ROLE + case USB_DR_MODE_OTG: + pdata.mode = MUSB_OTG; + glue->phy_mode = PHY_MODE_USB_OTG; + break; +#endif + default: + dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n"); + return -EINVAL; + } + pdata.platform_ops = &sunxi_musb_ops; + if (!of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) + pdata.config = &sunxi_musb_hdrc_config; + else + pdata.config = &sunxi_musb_hdrc_config_h3; + + glue->dev = &pdev->dev; + INIT_WORK(&glue->work, sunxi_musb_work); + glue->host_nb.notifier_call = sunxi_musb_host_notifier; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb")) + set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags); + + if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb")) + set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); + + if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") || + of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) { + set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); + set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags); + } + + glue->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(glue->clk)) { + dev_err(&pdev->dev, "Error getting clock: %ld\n", + PTR_ERR(glue->clk)); + return PTR_ERR(glue->clk); + } + + if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { + glue->rst = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(glue->rst)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->rst), + "Error getting reset\n"); + } + + glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(glue->extcon)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->extcon), + "Invalid or missing extcon\n"); + + glue->phy = devm_phy_get(&pdev->dev, "usb"); + if (IS_ERR(glue->phy)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy), + "Error getting phy\n"); + + glue->usb_phy = usb_phy_generic_register(); + if (IS_ERR(glue->usb_phy)) { + dev_err(&pdev->dev, "Error registering usb-phy %ld\n", + PTR_ERR(glue->usb_phy)); + return PTR_ERR(glue->usb_phy); + } + + glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + if (IS_ERR(glue->xceiv)) { + ret = PTR_ERR(glue->xceiv); + dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret); + goto err_unregister_usb_phy; + } + + platform_set_drvdata(pdev, glue); + + memset(&pinfo, 0, sizeof(pinfo)); + pinfo.name = "musb-hdrc"; + pinfo.id = PLATFORM_DEVID_AUTO; + pinfo.parent = &pdev->dev; + pinfo.fwnode = of_fwnode_handle(pdev->dev.of_node); + pinfo.of_node_reused = true; + pinfo.res = pdev->resource; + pinfo.num_res = pdev->num_resources; + pinfo.data = &pdata; + pinfo.size_data = sizeof(pdata); + + glue->musb_pdev = platform_device_register_full(&pinfo); + if (IS_ERR(glue->musb_pdev)) { + ret = PTR_ERR(glue->musb_pdev); + dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); + goto err_unregister_usb_phy; + } + + return 0; + +err_unregister_usb_phy: + usb_phy_generic_unregister(glue->usb_phy); + return ret; +} + +static int sunxi_musb_remove(struct platform_device *pdev) +{ + struct sunxi_glue *glue = platform_get_drvdata(pdev); + struct platform_device *usb_phy = glue->usb_phy; + + platform_device_unregister(glue->musb_pdev); + usb_phy_generic_unregister(usb_phy); + + return 0; +} + +static const struct of_device_id sunxi_musb_match[] = { + { .compatible = "allwinner,sun4i-a10-musb", }, + { .compatible = "allwinner,sun6i-a31-musb", }, + { .compatible = "allwinner,sun8i-a33-musb", }, + { .compatible = "allwinner,sun8i-h3-musb", }, + {} +}; +MODULE_DEVICE_TABLE(of, sunxi_musb_match); + +static struct platform_driver sunxi_musb_driver = { + .probe = sunxi_musb_probe, + .remove = sunxi_musb_remove, + .driver = { + .name = "musb-sunxi", + .of_match_table = sunxi_musb_match, + }, +}; +module_platform_driver(sunxi_musb_driver); + +MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); |