diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/serial/cypress_m8.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/serial/cypress_m8.c')
-rw-r--r-- | drivers/usb/serial/cypress_m8.c | 1209 |
1 files changed, 1209 insertions, 0 deletions
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c new file mode 100644 index 000000000..1e0c028c5 --- /dev/null +++ b/drivers/usb/serial/cypress_m8.c @@ -0,0 +1,1209 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * USB Cypress M8 driver + * + * Copyright (C) 2004 + * Lonnie Mendez (dignome@gmail.com) + * Copyright (C) 2003,2004 + * Neil Whelchel (koyama@firstlight.net) + * + * See Documentation/usb/usb-serial.rst for more information on using this + * driver + * + * See http://geocities.com/i0xox0i for information on this driver and the + * earthmate usb device. + */ + +/* Thanks to Neil Whelchel for writing the first cypress m8 implementation + for linux. */ +/* Thanks to cypress for providing references for the hid reports. */ +/* Thanks to Jiang Zhang for providing links and for general help. */ +/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/ + + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial.h> +#include <linux/kfifo.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <asm/unaligned.h> + +#include "cypress_m8.h" + + +static bool stats; +static int interval; +static bool unstable_bauds; + +#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>" +#define DRIVER_DESC "Cypress USB to Serial Driver" + +/* write buffer size defines */ +#define CYPRESS_BUF_SIZE 1024 + +static const struct usb_device_id id_table_earthmate[] = { + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_cyphidcomrs232[] = { + { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_nokiaca42v2[] = { + { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, + { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, + { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +enum packet_format { + packet_format_1, /* b0:status, b1:payload count */ + packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */ +}; + +struct cypress_private { + spinlock_t lock; /* private lock */ + int chiptype; /* identifier of device, for quirks/etc */ + int bytes_in; /* used for statistics */ + int bytes_out; /* used for statistics */ + int cmd_count; /* used for statistics */ + int cmd_ctrl; /* always set this to 1 before issuing a command */ + struct kfifo write_fifo; /* write fifo */ + int write_urb_in_use; /* write urb in use indicator */ + int write_urb_interval; /* interval to use for write urb */ + int read_urb_interval; /* interval to use for read urb */ + int comm_is_ok; /* true if communication is (still) ok */ + __u8 line_control; /* holds dtr / rts value */ + __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */ + __u8 current_config; /* stores the current configuration byte */ + __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */ + enum packet_format pkt_fmt; /* format to use for packet send / receive */ + int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */ + int baud_rate; /* stores current baud rate in + integer form */ + char prev_status; /* used for TIOCMIWAIT */ +}; + +/* function prototypes for the Cypress USB to serial device */ +static int cypress_earthmate_port_probe(struct usb_serial_port *port); +static int cypress_hidcom_port_probe(struct usb_serial_port *port); +static int cypress_ca42v2_port_probe(struct usb_serial_port *port); +static void cypress_port_remove(struct usb_serial_port *port); +static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port); +static void cypress_close(struct usb_serial_port *port); +static void cypress_dtr_rts(struct usb_serial_port *port, int on); +static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static void cypress_send(struct usb_serial_port *port); +static unsigned int cypress_write_room(struct tty_struct *tty); +static void cypress_earthmate_init_termios(struct tty_struct *tty); +static void cypress_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios); +static int cypress_tiocmget(struct tty_struct *tty); +static int cypress_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static unsigned int cypress_chars_in_buffer(struct tty_struct *tty); +static void cypress_throttle(struct tty_struct *tty); +static void cypress_unthrottle(struct tty_struct *tty); +static void cypress_set_dead(struct usb_serial_port *port); +static void cypress_read_int_callback(struct urb *urb); +static void cypress_write_int_callback(struct urb *urb); + +static struct usb_serial_driver cypress_earthmate_device = { + .driver = { + .owner = THIS_MODULE, + .name = "earthmate", + }, + .description = "DeLorme Earthmate USB", + .id_table = id_table_earthmate, + .num_ports = 1, + .port_probe = cypress_earthmate_port_probe, + .port_remove = cypress_port_remove, + .open = cypress_open, + .close = cypress_close, + .dtr_rts = cypress_dtr_rts, + .write = cypress_write, + .write_room = cypress_write_room, + .init_termios = cypress_earthmate_init_termios, + .set_termios = cypress_set_termios, + .tiocmget = cypress_tiocmget, + .tiocmset = cypress_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .chars_in_buffer = cypress_chars_in_buffer, + .throttle = cypress_throttle, + .unthrottle = cypress_unthrottle, + .read_int_callback = cypress_read_int_callback, + .write_int_callback = cypress_write_int_callback, +}; + +static struct usb_serial_driver cypress_hidcom_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cyphidcom", + }, + .description = "HID->COM RS232 Adapter", + .id_table = id_table_cyphidcomrs232, + .num_ports = 1, + .port_probe = cypress_hidcom_port_probe, + .port_remove = cypress_port_remove, + .open = cypress_open, + .close = cypress_close, + .dtr_rts = cypress_dtr_rts, + .write = cypress_write, + .write_room = cypress_write_room, + .set_termios = cypress_set_termios, + .tiocmget = cypress_tiocmget, + .tiocmset = cypress_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .chars_in_buffer = cypress_chars_in_buffer, + .throttle = cypress_throttle, + .unthrottle = cypress_unthrottle, + .read_int_callback = cypress_read_int_callback, + .write_int_callback = cypress_write_int_callback, +}; + +static struct usb_serial_driver cypress_ca42v2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "nokiaca42v2", + }, + .description = "Nokia CA-42 V2 Adapter", + .id_table = id_table_nokiaca42v2, + .num_ports = 1, + .port_probe = cypress_ca42v2_port_probe, + .port_remove = cypress_port_remove, + .open = cypress_open, + .close = cypress_close, + .dtr_rts = cypress_dtr_rts, + .write = cypress_write, + .write_room = cypress_write_room, + .set_termios = cypress_set_termios, + .tiocmget = cypress_tiocmget, + .tiocmset = cypress_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .chars_in_buffer = cypress_chars_in_buffer, + .throttle = cypress_throttle, + .unthrottle = cypress_unthrottle, + .read_int_callback = cypress_read_int_callback, + .write_int_callback = cypress_write_int_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &cypress_earthmate_device, &cypress_hidcom_device, + &cypress_ca42v2_device, NULL +}; + +/***************************************************************************** + * Cypress serial helper functions + *****************************************************************************/ + +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} + +static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) +{ + struct cypress_private *priv; + priv = usb_get_serial_port_data(port); + + if (unstable_bauds) + return new_rate; + + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + + /* + * The general purpose firmware for the Cypress M8 allows for + * a maximum speed of 57600bps (I have no idea whether DeLorme + * chose to use the general purpose firmware or not), if you + * need to modify this speed setting for your own project + * please add your own chiptype and modify the code likewise. + * The Cypress HID->COM device will work successfully up to + * 115200bps (but the actual throughput is around 3kBps). + */ + if (port->serial->dev->speed == USB_SPEED_LOW) { + /* + * Mike Isely <isely@pobox.com> 2-Feb-2008: The + * Cypress app note that describes this mechanism + * states that the low-speed part can't handle more + * than 800 bytes/sec, in which case 4800 baud is the + * safest speed for a part like that. + */ + if (new_rate > 4800) { + dev_dbg(&port->dev, + "%s - failed setting baud rate, device incapable speed %d\n", + __func__, new_rate); + return -1; + } + } + switch (priv->chiptype) { + case CT_EARTHMATE: + if (new_rate <= 600) { + /* 300 and 600 baud rates are supported under + * the generic firmware, but are not used with + * NMEA and SiRF protocols */ + dev_dbg(&port->dev, + "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n", + __func__, new_rate); + return -1; + } + break; + default: + break; + } + return new_rate; +} + + +/* This function can either set or retrieve the current serial line settings */ +static int cypress_serial_control(struct tty_struct *tty, + struct usb_serial_port *port, speed_t baud_rate, int data_bits, + int stop_bits, int parity_enable, int parity_type, int reset, + int cypress_request_type) +{ + int new_baudrate = 0, retval = 0, tries = 0; + struct cypress_private *priv; + struct device *dev = &port->dev; + u8 *feature_buffer; + const unsigned int feature_len = 5; + unsigned long flags; + + priv = usb_get_serial_port_data(port); + + if (!priv->comm_is_ok) + return -ENODEV; + + feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL); + if (!feature_buffer) + return -ENOMEM; + + switch (cypress_request_type) { + case CYPRESS_SET_CONFIG: + /* 0 means 'Hang up' so doesn't change the true bit rate */ + new_baudrate = priv->baud_rate; + if (baud_rate && baud_rate != priv->baud_rate) { + dev_dbg(dev, "%s - baud rate is changing\n", __func__); + retval = analyze_baud_rate(port, baud_rate); + if (retval >= 0) { + new_baudrate = retval; + dev_dbg(dev, "%s - New baud rate set to %d\n", + __func__, new_baudrate); + } + } + dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__, + new_baudrate); + + /* fill the feature_buffer with new configuration */ + put_unaligned_le32(new_baudrate, feature_buffer); + feature_buffer[4] |= data_bits - 5; /* assign data bits in 2 bit space ( max 3 ) */ + /* 1 bit gap */ + feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ + feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ + feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */ + /* 1 bit gap */ + feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ + + dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__); + dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__, + feature_buffer[0], feature_buffer[1], + feature_buffer[2], feature_buffer[3], + feature_buffer[4]); + + do { + retval = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0x0300, 0, feature_buffer, + feature_len, 500); + + if (tries++ >= 3) + break; + + } while (retval != feature_len && + retval != -ENODEV); + + if (retval != feature_len) { + dev_err(dev, "%s - failed sending serial line settings - %d\n", + __func__, retval); + cypress_set_dead(port); + } else { + spin_lock_irqsave(&priv->lock, flags); + priv->baud_rate = new_baudrate; + priv->current_config = feature_buffer[4]; + spin_unlock_irqrestore(&priv->lock, flags); + /* If we asked for a speed change encode it */ + if (baud_rate) + tty_encode_baud_rate(tty, + new_baudrate, new_baudrate); + } + break; + case CYPRESS_GET_CONFIG: + if (priv->get_cfg_unsafe) { + /* Not implemented for this device, + and if we try to do it we're likely + to crash the hardware. */ + retval = -ENOTTY; + goto out; + } + dev_dbg(dev, "%s - retrieving serial line settings\n", __func__); + do { + retval = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + HID_REQ_GET_REPORT, + USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0x0300, 0, feature_buffer, + feature_len, 500); + + if (tries++ >= 3) + break; + } while (retval != feature_len + && retval != -ENODEV); + + if (retval != feature_len) { + dev_err(dev, "%s - failed to retrieve serial line settings - %d\n", + __func__, retval); + cypress_set_dead(port); + goto out; + } else { + spin_lock_irqsave(&priv->lock, flags); + /* store the config in one byte, and later + use bit masks to check values */ + priv->current_config = feature_buffer[4]; + priv->baud_rate = get_unaligned_le32(feature_buffer); + spin_unlock_irqrestore(&priv->lock, flags); + } + } + spin_lock_irqsave(&priv->lock, flags); + ++priv->cmd_count; + spin_unlock_irqrestore(&priv->lock, flags); +out: + kfree(feature_buffer); + return retval; +} /* cypress_serial_control */ + + +static void cypress_set_dead(struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!priv->comm_is_ok) { + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + priv->comm_is_ok = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + dev_err(&port->dev, "cypress_m8 suspending failing port %d - " + "interval might be too short\n", port->port_number); +} + + +/***************************************************************************** + * Cypress serial driver functions + *****************************************************************************/ + + +static int cypress_generic_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct cypress_private *priv; + + if (!port->interrupt_out_urb || !port->interrupt_in_urb) { + dev_err(&port->dev, "required endpoint is missing\n"); + return -ENODEV; + } + + priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->comm_is_ok = !0; + spin_lock_init(&priv->lock); + if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) { + kfree(priv); + return -ENOMEM; + } + + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); + + priv->cmd_ctrl = 0; + priv->line_control = 0; + priv->rx_flags = 0; + /* Default packet format setting is determined by packet size. + Anything with a size larger then 9 must have a separate + count field since the 3 bit count field is otherwise too + small. Otherwise we can use the slightly more compact + format. This is in accordance with the cypress_m8 serial + converter app note. */ + if (port->interrupt_out_size > 9) + priv->pkt_fmt = packet_format_1; + else + priv->pkt_fmt = packet_format_2; + + if (interval > 0) { + priv->write_urb_interval = interval; + priv->read_urb_interval = interval; + dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n", + __func__, interval); + } else { + priv->write_urb_interval = port->interrupt_out_urb->interval; + priv->read_urb_interval = port->interrupt_in_urb->interval; + dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n", + __func__, priv->read_urb_interval, + priv->write_urb_interval); + } + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + + return 0; +} + + +static int cypress_earthmate_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct cypress_private *priv; + int ret; + + ret = cypress_generic_port_probe(port); + if (ret) { + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); + return ret; + } + + priv = usb_get_serial_port_data(port); + priv->chiptype = CT_EARTHMATE; + /* All Earthmate devices use the separated-count packet + format! Idiotic. */ + priv->pkt_fmt = packet_format_1; + if (serial->dev->descriptor.idProduct != + cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) { + /* The old original USB Earthmate seemed able to + handle GET_CONFIG requests; everything they've + produced since that time crashes if this command is + attempted :-( */ + dev_dbg(&port->dev, + "%s - Marking this device as unsafe for GET_CONFIG commands\n", + __func__); + priv->get_cfg_unsafe = !0; + } + + return 0; +} + +static int cypress_hidcom_port_probe(struct usb_serial_port *port) +{ + struct cypress_private *priv; + int ret; + + ret = cypress_generic_port_probe(port); + if (ret) { + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); + return ret; + } + + priv = usb_get_serial_port_data(port); + priv->chiptype = CT_CYPHIDCOM; + + return 0; +} + +static int cypress_ca42v2_port_probe(struct usb_serial_port *port) +{ + struct cypress_private *priv; + int ret; + + ret = cypress_generic_port_probe(port); + if (ret) { + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); + return ret; + } + + priv = usb_get_serial_port_data(port); + priv->chiptype = CT_CA42V2; + + return 0; +} + +static void cypress_port_remove(struct usb_serial_port *port) +{ + struct cypress_private *priv; + + priv = usb_get_serial_port_data(port); + + kfifo_free(&priv->write_fifo); + kfree(priv); +} + +static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + unsigned long flags; + int result = 0; + + if (!priv->comm_is_ok) + return -EIO; + + /* clear halts before open */ + usb_clear_halt(serial->dev, 0x81); + usb_clear_halt(serial->dev, 0x02); + + spin_lock_irqsave(&priv->lock, flags); + /* reset read/write statistics */ + priv->bytes_in = 0; + priv->bytes_out = 0; + priv->cmd_count = 0; + priv->rx_flags = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + /* Set termios */ + cypress_send(port); + + if (tty) + cypress_set_termios(tty, port, NULL); + + /* setup the port and start reading from the device */ + usb_fill_int_urb(port->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + cypress_read_int_callback, port, priv->read_urb_interval); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + + if (result) { + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); + cypress_set_dead(port); + } + + return result; +} /* cypress_open */ + +static void cypress_dtr_rts(struct usb_serial_port *port, int on) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + /* drop dtr and rts */ + spin_lock_irq(&priv->lock); + if (on == 0) + priv->line_control = 0; + else + priv->line_control = CONTROL_DTR | CONTROL_RTS; + priv->cmd_ctrl = 1; + spin_unlock_irq(&priv->lock); + cypress_write(NULL, port, NULL, 0); +} + +static void cypress_close(struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + kfifo_reset_out(&priv->write_fifo); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - stopping urbs\n", __func__); + usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_out_urb); + + if (stats) + dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", + priv->bytes_in, priv->bytes_out, priv->cmd_count); +} /* cypress_close */ + + +static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + + dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count); + + /* line control commands, which need to be executed immediately, + are not put into the buffer for obvious reasons. + */ + if (priv->cmd_ctrl) { + count = 0; + goto finish; + } + + if (!count) + return count; + + count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock); + +finish: + cypress_send(port); + + return count; +} /* cypress_write */ + + +static void cypress_send(struct usb_serial_port *port) +{ + int count = 0, result, offset, actual_size; + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned long flags; + + if (!priv->comm_is_ok) + return; + + dev_dbg(dev, "%s - interrupt out size is %d\n", __func__, + port->interrupt_out_size); + + spin_lock_irqsave(&priv->lock, flags); + if (priv->write_urb_in_use) { + dev_dbg(dev, "%s - can't write, urb in use\n", __func__); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + spin_unlock_irqrestore(&priv->lock, flags); + + /* clear buffer */ + memset(port->interrupt_out_urb->transfer_buffer, 0, + port->interrupt_out_size); + + spin_lock_irqsave(&priv->lock, flags); + switch (priv->pkt_fmt) { + default: + case packet_format_1: + /* this is for the CY7C64013... */ + offset = 2; + port->interrupt_out_buffer[0] = priv->line_control; + break; + case packet_format_2: + /* this is for the CY7C63743... */ + offset = 1; + port->interrupt_out_buffer[0] = priv->line_control; + break; + } + + if (priv->line_control & CONTROL_RESET) + priv->line_control &= ~CONTROL_RESET; + + if (priv->cmd_ctrl) { + priv->cmd_count++; + dev_dbg(dev, "%s - line control command being issued\n", __func__); + spin_unlock_irqrestore(&priv->lock, flags); + goto send; + } else + spin_unlock_irqrestore(&priv->lock, flags); + + count = kfifo_out_locked(&priv->write_fifo, + &port->interrupt_out_buffer[offset], + port->interrupt_out_size - offset, + &priv->lock); + if (count == 0) + return; + + switch (priv->pkt_fmt) { + default: + case packet_format_1: + port->interrupt_out_buffer[1] = count; + break; + case packet_format_2: + port->interrupt_out_buffer[0] |= count; + } + + dev_dbg(dev, "%s - count is %d\n", __func__, count); + +send: + spin_lock_irqsave(&priv->lock, flags); + priv->write_urb_in_use = 1; + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->cmd_ctrl) + actual_size = 1; + else + actual_size = count + + (priv->pkt_fmt == packet_format_1 ? 2 : 1); + + usb_serial_debug_data(dev, __func__, port->interrupt_out_size, + port->interrupt_out_urb->transfer_buffer); + + usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, + usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), + port->interrupt_out_buffer, actual_size, + cypress_write_int_callback, port, priv->write_urb_interval); + result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); + if (result) { + dev_err_console(port, + "%s - failed submitting write urb, error %d\n", + __func__, result); + priv->write_urb_in_use = 0; + cypress_set_dead(port); + } + + spin_lock_irqsave(&priv->lock, flags); + if (priv->cmd_ctrl) + priv->cmd_ctrl = 0; + + /* do not count the line control and size bytes */ + priv->bytes_out += count; + spin_unlock_irqrestore(&priv->lock, flags); + + usb_serial_port_softint(port); +} /* cypress_send */ + + +/* returns how much space is available in the soft buffer */ +static unsigned int cypress_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned int room; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + room = kfifo_avail(&priv->write_fifo); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - returns %u\n", __func__, room); + return room; +} + + +static int cypress_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + __u8 status, control; + unsigned int result = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + status = priv->current_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + | ((control & CONTROL_RTS) ? TIOCM_RTS : 0) + | ((status & UART_CTS) ? TIOCM_CTS : 0) + | ((status & UART_DSR) ? TIOCM_DSR : 0) + | ((status & UART_RI) ? TIOCM_RI : 0) + | ((status & UART_CD) ? TIOCM_CD : 0); + + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); + + return result; +} + + +static int cypress_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CONTROL_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CONTROL_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CONTROL_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CONTROL_DTR; + priv->cmd_ctrl = 1; + spin_unlock_irqrestore(&priv->lock, flags); + + return cypress_write(tty, port, NULL, 0); +} + +static void cypress_earthmate_init_termios(struct tty_struct *tty) +{ + tty_encode_baud_rate(tty, 4800, 4800); +} + +static void cypress_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + int data_bits, stop_bits, parity_type, parity_enable; + unsigned int cflag; + unsigned long flags; + __u8 oldlines; + int linechange = 0; + + /* Unsupported features need clearing */ + tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS); + + cflag = tty->termios.c_cflag; + + /* set number of data bits, parity, stop bits */ + /* when parity is disabled the parity type bit is ignored */ + + /* 1 means 2 stop bits, 0 means 1 stop bit */ + stop_bits = cflag & CSTOPB ? 1 : 0; + + if (cflag & PARENB) { + parity_enable = 1; + /* 1 means odd parity, 0 means even parity */ + parity_type = cflag & PARODD ? 1 : 0; + } else + parity_enable = parity_type = 0; + + data_bits = tty_get_char_size(cflag); + + spin_lock_irqsave(&priv->lock, flags); + oldlines = priv->line_control; + if ((cflag & CBAUD) == B0) { + /* drop dtr and rts */ + dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__); + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + } else + priv->line_control = (CONTROL_DTR | CONTROL_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n", + __func__, stop_bits, parity_enable, parity_type, data_bits); + + cypress_serial_control(tty, port, tty_get_baud_rate(tty), + data_bits, stop_bits, + parity_enable, parity_type, + 0, CYPRESS_SET_CONFIG); + + /* we perform a CYPRESS_GET_CONFIG so that the current settings are + * filled into the private structure this should confirm that all is + * working if it returns what we just set */ + cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG); + + /* Here we can define custom tty settings for devices; the main tty + * termios flag base comes from empeg.c */ + + spin_lock_irqsave(&priv->lock, flags); + if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) { + dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n"); + /* define custom termios settings for NMEA protocol */ + + tty->termios.c_iflag /* input modes - */ + &= ~(IGNBRK /* disable ignore break */ + | BRKINT /* disable break causes interrupt */ + | PARMRK /* disable mark parity errors */ + | ISTRIP /* disable clear high bit of input char */ + | INLCR /* disable translate NL to CR */ + | IGNCR /* disable ignore CR */ + | ICRNL /* disable translate CR to NL */ + | IXON); /* disable enable XON/XOFF flow control */ + + tty->termios.c_oflag /* output modes */ + &= ~OPOST; /* disable postprocess output char */ + + tty->termios.c_lflag /* line discipline modes */ + &= ~(ECHO /* disable echo input characters */ + | ECHONL /* disable echo new line */ + | ICANON /* disable erase, kill, werase, and rprnt + special characters */ + | ISIG /* disable interrupt, quit, and suspend + special characters */ + | IEXTEN); /* disable non-POSIX special characters */ + } /* CT_CYPHIDCOM: Application should handle this for device */ + + linechange = (priv->line_control != oldlines); + spin_unlock_irqrestore(&priv->lock, flags); + + /* if necessary, set lines */ + if (linechange) { + priv->cmd_ctrl = 1; + cypress_write(tty, port, NULL, 0); + } +} /* cypress_set_termios */ + + +/* returns amount of data still left in soft buffer */ +static unsigned int cypress_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned int chars; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + chars = kfifo_len(&priv->write_fifo); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars); + return chars; +} + + +static void cypress_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + + spin_lock_irq(&priv->lock); + priv->rx_flags = THROTTLED; + spin_unlock_irq(&priv->lock); +} + + +static void cypress_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + int actually_throttled, result; + + spin_lock_irq(&priv->lock); + actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; + priv->rx_flags = 0; + spin_unlock_irq(&priv->lock); + + if (!priv->comm_is_ok) + return; + + if (actually_throttled) { + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed submitting read urb, " + "error %d\n", __func__, result); + cypress_set_dead(port); + } + } +} + + +static void cypress_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + char tty_flag = TTY_NORMAL; + int bytes = 0; + int result; + int i = 0; + int status = urb->status; + + switch (status) { + case 0: /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* precursor to disconnect so just go away */ + return; + case -EPIPE: + /* Can't call usb_clear_halt while in_interrupt */ + fallthrough; + default: + /* something ugly is going on... */ + dev_err(dev, "%s - unexpected nonzero read status received: %d\n", + __func__, status); + cypress_set_dead(port); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (priv->rx_flags & THROTTLED) { + dev_dbg(dev, "%s - now throttling\n", __func__); + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + spin_unlock_irqrestore(&priv->lock, flags); + + tty = tty_port_tty_get(&port->port); + if (!tty) { + dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + result = urb->actual_length; + switch (priv->pkt_fmt) { + default: + case packet_format_1: + /* This is for the CY7C64013... */ + priv->current_status = data[0] & 0xF8; + bytes = data[1] + 2; + i = 2; + break; + case packet_format_2: + /* This is for the CY7C63743... */ + priv->current_status = data[0] & 0xF8; + bytes = (data[0] & 0x07) + 1; + i = 1; + break; + } + spin_unlock_irqrestore(&priv->lock, flags); + if (result < bytes) { + dev_dbg(dev, + "%s - wrong packet size - received %d bytes but packet said %d bytes\n", + __func__, result, bytes); + goto continue_read; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + spin_lock_irqsave(&priv->lock, flags); + /* check to see if status has changed */ + if (priv->current_status != priv->prev_status) { + u8 delta = priv->current_status ^ priv->prev_status; + + if (delta & UART_MSR_MASK) { + if (delta & UART_CTS) + port->icount.cts++; + if (delta & UART_DSR) + port->icount.dsr++; + if (delta & UART_RI) + port->icount.rng++; + if (delta & UART_CD) + port->icount.dcd++; + + wake_up_interruptible(&port->port.delta_msr_wait); + } + + priv->prev_status = priv->current_status; + } + spin_unlock_irqrestore(&priv->lock, flags); + + /* hangup, as defined in acm.c... this might be a bad place for it + * though */ + if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) { + dev_dbg(dev, "%s - calling hangup\n", __func__); + tty_hangup(tty); + goto continue_read; + } + + /* There is one error bit... I'm assuming it is a parity error + * indicator as the generic firmware will set this bit to 1 if a + * parity error occurs. + * I can not find reference to any other error events. */ + spin_lock_irqsave(&priv->lock, flags); + if (priv->current_status & CYP_ERROR) { + spin_unlock_irqrestore(&priv->lock, flags); + tty_flag = TTY_PARITY; + dev_dbg(dev, "%s - Parity Error detected\n", __func__); + } else + spin_unlock_irqrestore(&priv->lock, flags); + + /* process read if there is data other than line status */ + if (bytes > i) { + tty_insert_flip_string_fixed_flag(&port->port, data + i, + tty_flag, bytes - i); + tty_flip_buffer_push(&port->port); + } + + spin_lock_irqsave(&priv->lock, flags); + /* control and status byte(s) are also counted */ + priv->bytes_in += bytes; + spin_unlock_irqrestore(&priv->lock, flags); + +continue_read: + tty_kref_put(tty); + + /* Continue trying to always read */ + + if (priv->comm_is_ok) { + usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, + usb_rcvintpipe(port->serial->dev, + port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + cypress_read_int_callback, port, + priv->read_urb_interval); + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result && result != -EPERM) { + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + cypress_set_dead(port); + } + } +} /* cypress_read_int_callback */ + + +static void cypress_write_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); + priv->write_urb_in_use = 0; + return; + case -EPIPE: + /* Cannot call usb_clear_halt while in_interrupt */ + fallthrough; + default: + dev_err(dev, "%s - unexpected nonzero write status received: %d\n", + __func__, status); + cypress_set_dead(port); + break; + } + priv->write_urb_in_use = 0; + + /* send any buffered data */ + cypress_send(port); +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(stats, bool, 0644); +MODULE_PARM_DESC(stats, "Enable statistics or not"); +module_param(interval, int, 0644); +MODULE_PARM_DESC(interval, "Overrides interrupt interval"); +module_param(unstable_bauds, bool, 0644); +MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates"); |