diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/serial/keyspan_usa26msg.h | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/serial/keyspan_usa26msg.h')
-rw-r--r-- | drivers/usb/serial/keyspan_usa26msg.h | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/drivers/usb/serial/keyspan_usa26msg.h b/drivers/usb/serial/keyspan_usa26msg.h new file mode 100644 index 000000000..a68f1fb25 --- /dev/null +++ b/drivers/usb/serial/keyspan_usa26msg.h @@ -0,0 +1,261 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + usa26msg.h + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA28X + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Third revision: USA28X version (aka USA26) + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USAxx, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data: + + RQSTACK DAT DAT DAT ... + + with a total data length of 63. + + USB IN (USAxx -> host, receive) messages begin with a status + byte in which the 0x80 bit is either: + + (a) 0x80 bit clear + indicates that the bytes following it are all data + bytes: + + STAT DATA DATA DATA DATA DATA ... + + for a total of up to 63 DATA bytes, + + or: + + (b) 0x80 bit set + indicates that the bytes following alternate data and + status bytes: + + STAT DATA STAT DATA STAT DATA STAT DATA ... + + for a total of up to 32 DATA bytes. + + The valid bits in the STAT bytes are: + + OVERRUN 0x02 + PARITY 0x04 + FRAMING 0x08 + BREAK 0x10 + + Notes: + + (1) The OVERRUN bit can appear in either (a) or (b) format + messages, but the but the PARITY/FRAMING/BREAK bits + only appear in (b) format messages. + (2) For the host to determine the exact point at which the + overrun occurred (to identify the point in the data + stream at which the data was lost), it needs to count + 128 characters, starting at the first character of the + message in which OVERRUN was reported; the lost character(s) + would have been received between the 128th and 129th + characters. + (3) An RX data message in which the first byte has 0x80 clear + serves as a "break off" indicator. + + revision history: + + 1999feb10 add reportHskiaChanges to allow us to ignore them + 1999feb10 add txAckThreshold for fast+loose throughput enhancement + 1999mar30 beef up support for RX error reporting + 1999apr14 add resetDataToggle to control message + 2000jan04 merge with usa17msg.h + 2000jun01 add extended BSD-style copyright text + 2001jul05 change message format to improve OVERRUN case + + Note on shared names: + + In the case of fields which have been merged between the USA17 + and USA26 definitions, the USA26 definition is the first part + of the name and the USA17 definition is the second part of the + name; both meanings are described below. +*/ + +#ifndef __USA26MSG__ +#define __USA26MSG__ + + +struct keyspan_usa26_portControlMessage +{ + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the USA26): + */ + u8 setClocking, // BOTH: host requests baud rate be set + baudLo, // BOTH: host does baud divisor calculation + baudHi, // BOTH: baudHi is only used for first port (gives lower rates) + externalClock_txClocking, + // USA26: 0=internal, other=external + // USA17: 0=internal, other=external/RI + rxClocking, // USA17: 0=internal, 1=external/RI, other=external/DSR + + + setLcr, // BOTH: host requests lcr be set + lcr, // BOTH: use PARITY, STOPBITS, DATABITS below + + setFlowControl, // BOTH: host requests flow control be set + ctsFlowControl, // BOTH: 1=use CTS flow control, 0=don't + xonFlowControl, // BOTH: 1=use XON/XOFF flow control, 0=don't + xonChar, // BOTH: specified in current character format + xoffChar, // BOTH: specified in current character format + + setTxTriState_setRts, + // USA26: host requests TX tri-state be set + // USA17: host requests RTS output be set + txTriState_rts, // BOTH: 1=active (normal), 0=tristate (off) + + setHskoa_setDtr, + // USA26: host requests HSKOA output be set + // USA17: host requests DTR output be set + hskoa_dtr, // BOTH: 1=on, 0=off + + setPrescaler, // USA26: host requests prescalar be set (default: 13) + prescaler; // BOTH: specified as N/8; values 8-ff are valid + // must be set any time internal baud rate is set; + // must not be set when external clocking is used + // note: in USA17, prescaler is applied whenever + // setClocking is requested + + /* + 3. configuration data which is simply used as is (no overhead, + but must be specified correctly in every host message). + */ + u8 forwardingLength, // BOTH: forward when this number of chars available + reportHskiaChanges_dsrFlowControl, + // USA26: 1=normal; 0=ignore external clock + // USA17: 1=use DSR flow control, 0=don't + txAckThreshold, // BOTH: 0=not allowed, 1=normal, 2-255 deliver ACK faster + loopbackMode; // BOTH: 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // BOTH: enable transmitting (and continue if there's data) + _txOff, // BOTH: stop transmitting + txFlush, // BOTH: toss outbound data + txBreak, // BOTH: turn on break (cleared by _txOn) + rxOn, // BOTH: turn on receiver + rxOff, // BOTH: turn off receiver + rxFlush, // BOTH: toss inbound data + rxForward, // BOTH: forward all inbound data, NOW (as if fwdLen==1) + returnStatus, // BOTH: return current status (even if it hasn't changed) + resetDataToggle;// BOTH: reset data toggle state to DATA0 + +}; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_1 0x28 +#define PARITY_0 0x38 + +// all things called "StatusMessage" are sent on the status endpoint + +struct keyspan_usa26_portStatusMessage // one for each port +{ + u8 port, // BOTH: 0=first, 1=second, other=see below + hskia_cts, // USA26: reports HSKIA pin + // USA17: reports CTS pin + gpia_dcd, // USA26: reports GPIA pin + // USA17: reports DCD pin + dsr, // USA17: reports DSR pin + ri, // USA17: reports RI pin + _txOff, // port has been disabled (by host) + _txXoff, // port is in XOFF state (either host or RX XOFF) + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + controlResponse;// 1=a control message has been processed +}; + +// bits in RX data message when STAT byte is included +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +struct keyspan_usa26_globalControlMessage +{ + u8 sendGlobalStatus, // 2=request for two status responses + resetStatusToggle, // 1=reset global status toggle + resetStatusCount; // a cycling value +}; + +struct keyspan_usa26_globalStatusMessage +{ + u8 port, // 3 + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +}; + +struct keyspan_usa26_globalDebugMessage +{ + u8 port, // 2 + a, + b, + c, + d; +}; + +// ie: the maximum length of an EZUSB endpoint buffer +#define MAX_DATA_LEN 64 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +// status rationing tuning value (each port gets checked each n ms) +#define STATUS_RATION 10 + +#endif + + |