diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/xen/Kconfig | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/xen/Kconfig')
-rw-r--r-- | drivers/xen/Kconfig | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig new file mode 100644 index 000000000..d5d7c402b --- /dev/null +++ b/drivers/xen/Kconfig @@ -0,0 +1,367 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Xen driver support" + depends on XEN + +config XEN_BALLOON + bool "Xen memory balloon driver" + default y + help + The balloon driver allows the Xen domain to request more memory from + the system to expand the domain's memory allocation, or alternatively + return unneeded memory to the system. + +config XEN_BALLOON_MEMORY_HOTPLUG + bool "Memory hotplug support for Xen balloon driver" + depends on XEN_BALLOON && MEMORY_HOTPLUG + default y + help + Memory hotplug support for Xen balloon driver allows expanding memory + available for the system above limit declared at system startup. + It is very useful on critical systems which require long + run without rebooting. + + It's also very useful for non PV domains to obtain unpopulated physical + memory ranges to use in order to map foreign memory or grants. + + Memory could be hotplugged in following steps: + + 1) target domain: ensure that memory auto online policy is in + effect by checking /sys/devices/system/memory/auto_online_blocks + file (should be 'online'). + + 2) control domain: xl mem-max <target-domain> <maxmem> + where <maxmem> is >= requested memory size, + + 3) control domain: xl mem-set <target-domain> <memory> + where <memory> is requested memory size; alternatively memory + could be added by writing proper value to + /sys/devices/system/xen_memory/xen_memory0/target or + /sys/devices/system/xen_memory/xen_memory0/target_kb on the + target domain. + + Alternatively, if memory auto onlining was not requested at step 1 + the newly added memory can be manually onlined in the target domain + by doing the following: + + for i in /sys/devices/system/memory/memory*/state; do \ + [ "`cat "$i"`" = offline ] && echo online > "$i"; done + + or by adding the following line to udev rules: + + SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'" + +config XEN_MEMORY_HOTPLUG_LIMIT + int "Hotplugged memory limit (in GiB) for a PV guest" + default 512 + depends on XEN_HAVE_PVMMU + depends on MEMORY_HOTPLUG + help + Maximum amount of memory (in GiB) that a PV guest can be + expanded to when using memory hotplug. + + A PV guest can have more memory than this limit if is + started with a larger maximum. + + This value is used to allocate enough space in internal + tables needed for physical memory administration. + +config XEN_SCRUB_PAGES_DEFAULT + bool "Scrub pages before returning them to system by default" + depends on XEN_BALLOON + default y + help + Scrub pages before returning them to the system for reuse by + other domains. This makes sure that any confidential data + is not accidentally visible to other domains. It is more + secure, but slightly less efficient. This can be controlled with + xen_scrub_pages=0 parameter and + /sys/devices/system/xen_memory/xen_memory0/scrub_pages. + This option only sets the default value. + + If in doubt, say yes. + +config XEN_DEV_EVTCHN + tristate "Xen /dev/xen/evtchn device" + default y + help + The evtchn driver allows a userspace process to trigger event + channels and to receive notification of an event channel + firing. + If in doubt, say yes. + +config XEN_BACKEND + bool "Backend driver support" + default XEN_DOM0 + help + Support for backend device drivers that provide I/O services + to other virtual machines. + +config XENFS + tristate "Xen filesystem" + select XEN_PRIVCMD + default y + help + The xen filesystem provides a way for domains to share + information with each other and with the hypervisor. + For example, by reading and writing the "xenbus" file, guests + may pass arbitrary information to the initial domain. + If in doubt, say yes. + +config XEN_COMPAT_XENFS + bool "Create compatibility mount point /proc/xen" + depends on XENFS + default y + help + The old xenstore userspace tools expect to find "xenbus" + under /proc/xen, but "xenbus" is now found at the root of the + xenfs filesystem. Selecting this causes the kernel to create + the compatibility mount point /proc/xen if it is running on + a xen platform. + If in doubt, say yes. + +config XEN_SYS_HYPERVISOR + bool "Create xen entries under /sys/hypervisor" + depends on SYSFS + select SYS_HYPERVISOR + default y + help + Create entries under /sys/hypervisor describing the Xen + hypervisor environment. When running native or in another + virtual environment, /sys/hypervisor will still be present, + but will have no xen contents. + +config XEN_XENBUS_FRONTEND + tristate + +config XEN_GNTDEV + tristate "userspace grant access device driver" + depends on XEN + default m + select MMU_NOTIFIER + help + Allows userspace processes to use grants. + +config XEN_GNTDEV_DMABUF + bool "Add support for dma-buf grant access device driver extension" + depends on XEN_GNTDEV && XEN_GRANT_DMA_ALLOC + select DMA_SHARED_BUFFER + help + Allows userspace processes and kernel modules to use Xen backed + dma-buf implementation. With this extension grant references to + the pages of an imported dma-buf can be exported for other domain + use and grant references coming from a foreign domain can be + converted into a local dma-buf for local export. + +config XEN_GRANT_DEV_ALLOC + tristate "User-space grant reference allocator driver" + depends on XEN + default m + help + Allows userspace processes to create pages with access granted + to other domains. This can be used to implement frontend drivers + or as part of an inter-domain shared memory channel. + +config XEN_GRANT_DMA_ALLOC + bool "Allow allocating DMA capable buffers with grant reference module" + depends on XEN && HAS_DMA + help + Extends grant table module API to allow allocating DMA capable + buffers and mapping foreign grant references on top of it. + The resulting buffer is similar to one allocated by the balloon + driver in that proper memory reservation is made by + ({increase|decrease}_reservation and VA mappings are updated if + needed). + This is useful for sharing foreign buffers with HW drivers which + cannot work with scattered buffers provided by the balloon driver, + but require DMAable memory instead. + +config SWIOTLB_XEN + def_bool y + depends on XEN_PV || ARM || ARM64 + select DMA_OPS + select SWIOTLB + +config XEN_PCI_STUB + bool + +config XEN_PCIDEV_STUB + tristate "Xen PCI-device stub driver" + depends on PCI && !X86 && XEN + depends on XEN_BACKEND + select XEN_PCI_STUB + default m + help + The PCI device stub driver provides limited version of the PCI + device backend driver without para-virtualized support for guests. + If you select this to be a module, you will need to make sure no + other driver has bound to the device(s) you want to make visible to + other guests. + + The "hide" parameter (only applicable if backend driver is compiled + into the kernel) allows you to bind the PCI devices to this module + from the default device drivers. The argument is the list of PCI BDFs: + xen-pciback.hide=(03:00.0)(04:00.0) + + If in doubt, say m. + +config XEN_PCIDEV_BACKEND + tristate "Xen PCI-device backend driver" + depends on PCI && X86 && XEN + depends on XEN_BACKEND + select XEN_PCI_STUB + default m + help + The PCI device backend driver allows the kernel to export arbitrary + PCI devices to other guests. If you select this to be a module, you + will need to make sure no other driver has bound to the device(s) + you want to make visible to other guests. + + The parameter "passthrough" allows you specify how you want the PCI + devices to appear in the guest. You can choose the default (0) where + PCI topology starts at 00.00.0, or (1) for passthrough if you want + the PCI devices topology appear the same as in the host. + + The "hide" parameter (only applicable if backend driver is compiled + into the kernel) allows you to bind the PCI devices to this module + from the default device drivers. The argument is the list of PCI BDFs: + xen-pciback.hide=(03:00.0)(04:00.0) + + If in doubt, say m. + +config XEN_PVCALLS_FRONTEND + tristate "XEN PV Calls frontend driver" + depends on INET && XEN + select XEN_XENBUS_FRONTEND + help + Experimental frontend for the Xen PV Calls protocol + (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It + sends a small set of POSIX calls to the backend, which + implements them. + +config XEN_PVCALLS_BACKEND + tristate "XEN PV Calls backend driver" + depends on INET && XEN && XEN_BACKEND + help + Experimental backend for the Xen PV Calls protocol + (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It + allows PV Calls frontends to send POSIX calls to the backend, + which implements them. + + If in doubt, say n. + +config XEN_SCSI_BACKEND + tristate "XEN SCSI backend driver" + depends on XEN && XEN_BACKEND && TARGET_CORE + help + The SCSI backend driver allows the kernel to export its SCSI Devices + to other guests via a high-performance shared-memory interface. + Only needed for systems running as XEN driver domains (e.g. Dom0) and + if guests need generic access to SCSI devices. + +config XEN_PRIVCMD + tristate "Xen hypercall passthrough driver" + depends on XEN + default m + help + The hypercall passthrough driver allows privileged user programs to + perform Xen hypercalls. This driver is normally required for systems + running as Dom0 to perform privileged operations, but in some + disaggregated Xen setups this driver might be needed for other + domains, too. + +config XEN_ACPI_PROCESSOR + tristate "Xen ACPI processor" + depends on XEN && XEN_PV_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ + default m + help + This ACPI processor uploads Power Management information to the Xen + hypervisor. + + To do that the driver parses the Power Management data and uploads + said information to the Xen hypervisor. Then the Xen hypervisor can + select the proper Cx and Pxx states. It also registers itself as the + SMM so that other drivers (such as ACPI cpufreq scaling driver) will + not load. + + To compile this driver as a module, choose M here: the module will be + called xen_acpi_processor If you do not know what to choose, select + M here. If the CPUFREQ drivers are built in, select Y here. + +config XEN_MCE_LOG + bool "Xen platform mcelog" + depends on XEN_PV_DOM0 && X86_MCE + help + Allow kernel fetching MCE error from Xen platform and + converting it into Linux mcelog format for mcelog tools + +config XEN_HAVE_PVMMU + bool + +config XEN_EFI + def_bool y + depends on (ARM || ARM64 || X86_64) && EFI + +config XEN_AUTO_XLATE + def_bool y + depends on ARM || ARM64 || XEN_PVHVM + help + Support for auto-translated physmap guests. + +config XEN_ACPI + def_bool y + depends on X86 && ACPI + +config XEN_SYMS + bool "Xen symbols" + depends on X86 && XEN_DOM0 && XENFS + default y if KALLSYMS + help + Exports hypervisor symbols (along with their types and addresses) via + /proc/xen/xensyms file, similar to /proc/kallsyms + +config XEN_HAVE_VPMU + bool + +config XEN_FRONT_PGDIR_SHBUF + tristate + +config XEN_UNPOPULATED_ALLOC + bool "Use unpopulated memory ranges for guest mappings" + depends on ZONE_DEVICE + default XEN_BACKEND || XEN_GNTDEV || XEN_DOM0 + help + Use unpopulated memory ranges in order to create mappings for guest + memory regions, including grant maps and foreign pages. This avoids + having to balloon out RAM regions in order to obtain physical memory + space to create such mappings. + +config XEN_GRANT_DMA_IOMMU + bool + select IOMMU_API + +config XEN_GRANT_DMA_OPS + bool + select DMA_OPS + +config XEN_VIRTIO + bool "Xen virtio support" + depends on VIRTIO + select XEN_GRANT_DMA_OPS + select XEN_GRANT_DMA_IOMMU if OF + help + Enable virtio support for running as Xen guest. Depending on the + guest type this will require special support on the backend side + (qemu or kernel, depending on the virtio device types used). + + If in doubt, say n. + +config XEN_VIRTIO_FORCE_GRANT + bool "Require Xen virtio support to use grants" + depends on XEN_VIRTIO + help + Require virtio for Xen guests to use grant mappings. + This will avoid the need to give the backend the right to map all + of the guest memory. This will need support on the backend side + (e.g. qemu or kernel, depending on the virtio device types used). + +endmenu |