Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 77 insertions, 0 deletions

diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
new file mode 100644
index 000000000..252cdfd0d
--- /dev/null
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * This header provides constants for DRA pinctrl bindings.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Rajendra Nayak <rnayak@ti.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_DRA_H
+#define _DT_BINDINGS_PINCTRL_DRA_H
+
+/* DRA7 mux mode options for each pin. See TRM for options */
+#define MUX_MODE0	0x0
+#define MUX_MODE1	0x1
+#define MUX_MODE2	0x2
+#define MUX_MODE3	0x3
+#define MUX_MODE4	0x4
+#define MUX_MODE5	0x5
+#define MUX_MODE6	0x6
+#define MUX_MODE7	0x7
+#define MUX_MODE8	0x8
+#define MUX_MODE9	0x9
+#define MUX_MODE10	0xa
+#define MUX_MODE11	0xb
+#define MUX_MODE12	0xc
+#define MUX_MODE13	0xd
+#define MUX_MODE14	0xe
+#define MUX_MODE15	0xf
+
+/* Certain pins need virtual mode, but note: they may glitch */
+#define MUX_VIRTUAL_MODE0	(MODE_SELECT | (0x0 << 4))
+#define MUX_VIRTUAL_MODE1	(MODE_SELECT | (0x1 << 4))
+#define MUX_VIRTUAL_MODE2	(MODE_SELECT | (0x2 << 4))
+#define MUX_VIRTUAL_MODE3	(MODE_SELECT | (0x3 << 4))
+#define MUX_VIRTUAL_MODE4	(MODE_SELECT | (0x4 << 4))
+#define MUX_VIRTUAL_MODE5	(MODE_SELECT | (0x5 << 4))
+#define MUX_VIRTUAL_MODE6	(MODE_SELECT | (0x6 << 4))
+#define MUX_VIRTUAL_MODE7	(MODE_SELECT | (0x7 << 4))
+#define MUX_VIRTUAL_MODE8	(MODE_SELECT | (0x8 << 4))
+#define MUX_VIRTUAL_MODE9	(MODE_SELECT | (0x9 << 4))
+#define MUX_VIRTUAL_MODE10	(MODE_SELECT | (0xa << 4))
+#define MUX_VIRTUAL_MODE11	(MODE_SELECT | (0xb << 4))
+#define MUX_VIRTUAL_MODE12	(MODE_SELECT | (0xc << 4))
+#define MUX_VIRTUAL_MODE13	(MODE_SELECT | (0xd << 4))
+#define MUX_VIRTUAL_MODE14	(MODE_SELECT | (0xe << 4))
+#define MUX_VIRTUAL_MODE15	(MODE_SELECT | (0xf << 4))
+
+#define MODE_SELECT		(1 << 8)
+
+#define PULL_ENA		(0 << 16)
+#define PULL_DIS		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCONTROL		(1 << 19)
+#define WAKEUP_EN		(1 << 24)
+#define WAKEUP_EVENT		(1 << 25)
+
+/* Active pin states */
+#define PIN_OUTPUT		(0 | PULL_DIS)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(0)
+#define PIN_INPUT		(INPUT_EN | PULL_DIS)
+#define PIN_INPUT_SLEW		(INPUT_EN | SLEWCONTROL)
+#define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
+
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define DRA7XX_CORE_IOPAD(pa, val)	(((pa) & 0xffff) - 0x3400) (val)
+
+/* DRA7 IODELAY configuration parameters */
+#define A_DELAY_PS(val)			((val) & 0xffff)
+#define G_DELAY_PS(val)			((val) & 0xffff)
+#endif
+