Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 184 insertions, 0 deletions

diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
new file mode 100644
index 000000000..e74a93475
--- /dev/null
+++ b/include/media/davinci/vpbe.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ */
+#ifndef _VPBE_H
+#define _VPBE_H
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_types.h>
+
+/* OSD configuration info */
+struct osd_config_info {
+	char module_name[32];
+};
+
+struct vpbe_output {
+	struct v4l2_output output;
+	/*
+	 * If output capabilities include dv_timings, list supported timings
+	 * below
+	 */
+	char *subdev_name;
+	/*
+	 * defualt_mode identifies the default timings set at the venc or
+	 * external encoder.
+	 */
+	char *default_mode;
+	/*
+	 * Fields below are used for supporting multiple modes. For example,
+	 * LCD panel might support different modes and they are listed here.
+	 * Similarly for supporting external encoders, lcd controller port
+	 * requires a set of non-standard timing values to be listed here for
+	 * each supported mode since venc is used in non-standard timing mode
+	 * for interfacing with external encoder similar to configuring lcd
+	 * panel timings
+	 */
+	unsigned int num_modes;
+	struct vpbe_enc_mode_info *modes;
+	/*
+	 * Bus configuration goes here for external encoders. Some encoders
+	 * may require multiple interface types for each of the output. For
+	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
+	 * Not sure if this is needed on a per mode basis instead of per
+	 * output basis. If per mode is needed, we may have to move this to
+	 * mode_info structure
+	 */
+	u32 if_params;
+};
+
+/* encoder configuration info */
+struct encoder_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/*amplifier configuration info */
+struct amp_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/* structure for defining vpbe display subsystem components */
+struct vpbe_config {
+	char module_name[32];
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	struct osd_config_info osd;
+	struct encoder_config_info venc;
+	/* external encoder information goes here */
+	int num_ext_encoders;
+	struct encoder_config_info *ext_encoders;
+	/* amplifier information goes here */
+	struct amp_config_info *amp;
+	unsigned int num_outputs;
+	/* Order is venc outputs followed by LCD and then external encoders */
+	struct vpbe_output *outputs;
+};
+
+struct vpbe_device;
+
+struct vpbe_device_ops {
+	/* Enumerate the outputs */
+	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
+			    struct v4l2_output *output);
+
+	/* Set output to the given index */
+	int (*set_output)(struct vpbe_device *vpbe_dev,
+			 int index);
+
+	/* Get current output */
+	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
+
+	/* Set DV preset at current output */
+	int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_timings *dv_timings);
+
+	/* Get DV presets supported at the output */
+	int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_timings *dv_timings);
+
+	/* Enumerate the DV Presets supported at the output */
+	int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
+			       struct v4l2_enum_dv_timings *timings_info);
+
+	/* Set std at the output */
+	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id);
+
+	/* Get the current std at the output */
+	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* initialize the device */
+	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* De-initialize the device */
+	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* Get the current mode info */
+	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
+			     struct vpbe_enc_mode_info*);
+
+	/*
+	 * Set the current mode in the encoder. Alternate way of setting
+	 * standard or DV preset or custom timings in the encoder
+	 */
+	int (*set_mode)(struct vpbe_device *vpbe_dev,
+			struct vpbe_enc_mode_info*);
+	/* Power management operations */
+	int (*suspend)(struct vpbe_device *vpbe_dev);
+	int (*resume)(struct vpbe_device *vpbe_dev);
+};
+
+/* struct for vpbe device */
+struct vpbe_device {
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* vpbe dispay controller cfg */
+	struct vpbe_config *cfg;
+	/* parent device */
+	struct device *pdev;
+	/* external encoder v4l2 sub devices */
+	struct v4l2_subdev **encoders;
+	/* current encoder index */
+	int current_sd_index;
+	/* external amplifier v4l2 subdevice */
+	struct v4l2_subdev *amp;
+	struct mutex lock;
+	/* device initialized */
+	int initialized;
+	/* vpbe dac clock */
+	struct clk *dac_clk;
+	/* osd_device pointer */
+	struct osd_state *osd_device;
+	/* venc device pointer */
+	struct venc_platform_data *venc_device;
+	/*
+	 * fields below are accessed by users of vpbe_device. Not the
+	 * ones above
+	 */
+
+	/* current output */
+	int current_out_index;
+	/* lock used by caller to do atomic operation on vpbe device */
+	/* current timings set in the controller */
+	struct vpbe_enc_mode_info current_timings;
+	/* venc sub device */
+	struct v4l2_subdev *venc;
+	/* device operations below */
+	struct vpbe_device_ops ops;
+};
+
+#endif