Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 4663 insertions, 0 deletions

diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h
new file mode 100644
index 000000000..173e4049d
--- /dev/null
+++ b/include/soc/fsl/bman.h
@@ -0,0 +1,145 @@
+/* Copyright 2008 - 2016 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_BMAN_H
+#define __FSL_BMAN_H
+
+/* wrapper for 48-bit buffers */
+struct bm_buffer {
+	union {
+		struct {
+			__be16 bpid; /* hi 8-bits reserved */
+			__be16 hi; /* High 16-bits of 48-bit address */
+			__be32 lo; /* Low 32-bits of 48-bit address */
+		};
+		__be64 data;
+	};
+} __aligned(8);
+/*
+ * Restore the 48 bit address previously stored in BMan
+ * hardware pools as a dma_addr_t
+ */
+static inline dma_addr_t bm_buf_addr(const struct bm_buffer *buf)
+{
+	return be64_to_cpu(buf->data) & 0xffffffffffffLLU;
+}
+
+static inline u64 bm_buffer_get64(const struct bm_buffer *buf)
+{
+	return be64_to_cpu(buf->data) & 0xffffffffffffLLU;
+}
+
+static inline void bm_buffer_set64(struct bm_buffer *buf, u64 addr)
+{
+	buf->hi = cpu_to_be16(upper_32_bits(addr));
+	buf->lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+static inline u8 bm_buffer_get_bpid(const struct bm_buffer *buf)
+{
+	return be16_to_cpu(buf->bpid) & 0xff;
+}
+
+static inline void bm_buffer_set_bpid(struct bm_buffer *buf, int bpid)
+{
+	buf->bpid = cpu_to_be16(bpid & 0xff);
+}
+
+/* Managed portal, high-level i/face */
+
+/* Portal and Buffer Pools */
+struct bman_portal;
+struct bman_pool;
+
+#define BM_POOL_MAX		64 /* max # of buffer pools */
+
+/**
+ * bman_new_pool - Allocates a Buffer Pool object
+ *
+ * Creates a pool object, and returns a reference to it or NULL on error.
+ */
+struct bman_pool *bman_new_pool(void);
+
+/**
+ * bman_free_pool - Deallocates a Buffer Pool object
+ * @pool: the pool object to release
+ */
+void bman_free_pool(struct bman_pool *pool);
+
+/**
+ * bman_get_bpid - Returns a pool object's BPID.
+ * @pool: the pool object
+ *
+ * The returned value is the index of the encapsulated buffer pool,
+ * in the range of [0, @BM_POOL_MAX-1].
+ */
+int bman_get_bpid(const struct bman_pool *pool);
+
+/**
+ * bman_release - Release buffer(s) to the buffer pool
+ * @pool: the buffer pool object to release to
+ * @bufs: an array of buffers to release
+ * @num: the number of buffers in @bufs (1-8)
+ *
+ * Adds the given buffers to RCR entries. If the RCR ring is unresponsive,
+ * the function will return -ETIMEDOUT. Otherwise, it returns zero.
+ */
+int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num);
+
+/**
+ * bman_acquire - Acquire buffer(s) from a buffer pool
+ * @pool: the buffer pool object to acquire from
+ * @bufs: array for storing the acquired buffers
+ * @num: the number of buffers desired (@bufs is at least this big)
+ *
+ * Issues an "Acquire" command via the portal's management command interface.
+ * The return value will be the number of buffers obtained from the pool, or a
+ * negative error code if a h/w error or pool starvation was encountered. In
+ * the latter case, the content of @bufs is undefined.
+ */
+int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num);
+
+/**
+ * bman_is_probed - Check if bman is probed
+ *
+ * Returns 1 if the bman driver successfully probed, -1 if the bman driver
+ * failed to probe or 0 if the bman driver did not probed yet.
+ */
+int bman_is_probed(void);
+/**
+ * bman_portals_probed - Check if all cpu bound bman portals are probed
+ *
+ * Returns 1 if all the required cpu bound bman portals successfully probed,
+ * -1 if probe errors appeared or 0 if the bman portals did not yet finished
+ * probing.
+ */
+int bman_portals_probed(void);
+
+#endif	/* __FSL_BMAN_H */
diff --git a/include/soc/fsl/caam-blob.h b/include/soc/fsl/caam-blob.h
new file mode 100644
index 000000000..937cac52f
--- /dev/null
+++ b/include/soc/fsl/caam-blob.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de>
+ */
+
+#ifndef __CAAM_BLOB_GEN
+#define __CAAM_BLOB_GEN
+
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#define CAAM_BLOB_KEYMOD_LENGTH		16
+#define CAAM_BLOB_OVERHEAD		(32 + 16)
+#define CAAM_BLOB_MAX_LEN		4096
+
+struct caam_blob_priv;
+
+/**
+ * struct caam_blob_info - information for CAAM blobbing
+ * @input:       pointer to input buffer (must be DMAable)
+ * @input_len:   length of @input buffer in bytes.
+ * @output:      pointer to output buffer (must be DMAable)
+ * @output_len:  length of @output buffer in bytes.
+ * @key_mod:     key modifier
+ * @key_mod_len: length of @key_mod in bytes.
+ *	         May not exceed %CAAM_BLOB_KEYMOD_LENGTH
+ */
+struct caam_blob_info {
+	void *input;
+	size_t input_len;
+
+	void *output;
+	size_t output_len;
+
+	const void *key_mod;
+	size_t key_mod_len;
+};
+
+/**
+ * caam_blob_gen_init - initialize blob generation
+ * Return: pointer to new &struct caam_blob_priv instance on success
+ * and ``ERR_PTR(-ENODEV)`` if CAAM has no hardware blobbing support
+ * or no job ring could be allocated.
+ */
+struct caam_blob_priv *caam_blob_gen_init(void);
+
+/**
+ * caam_blob_gen_exit - free blob generation resources
+ * @priv: instance returned by caam_blob_gen_init()
+ */
+void caam_blob_gen_exit(struct caam_blob_priv *priv);
+
+/**
+ * caam_process_blob - encapsulate or decapsulate blob
+ * @priv:   instance returned by caam_blob_gen_init()
+ * @info:   pointer to blobbing info describing key, blob and
+ *          key modifier buffers.
+ * @encap:  true for encapsulation, false for decapsulation
+ *
+ * Return: %0 and sets ``info->output_len`` on success and a negative
+ * error code otherwise.
+ */
+int caam_process_blob(struct caam_blob_priv *priv,
+		      struct caam_blob_info *info, bool encap);
+
+/**
+ * caam_encap_blob - encapsulate blob
+ * @priv:   instance returned by caam_blob_gen_init()
+ * @info:   pointer to blobbing info describing input key,
+ *          output blob and key modifier buffers.
+ *
+ * Return: %0 and sets ``info->output_len`` on success and
+ * a negative error code otherwise.
+ */
+static inline int caam_encap_blob(struct caam_blob_priv *priv,
+				  struct caam_blob_info *info)
+{
+	if (info->output_len < info->input_len + CAAM_BLOB_OVERHEAD)
+		return -EINVAL;
+
+	return caam_process_blob(priv, info, true);
+}
+
+/**
+ * caam_decap_blob - decapsulate blob
+ * @priv:   instance returned by caam_blob_gen_init()
+ * @info:   pointer to blobbing info describing output key,
+ *          input blob and key modifier buffers.
+ *
+ * Return: %0 and sets ``info->output_len`` on success and
+ * a negative error code otherwise.
+ */
+static inline int caam_decap_blob(struct caam_blob_priv *priv,
+				  struct caam_blob_info *info)
+{
+	if (info->input_len < CAAM_BLOB_OVERHEAD ||
+	    info->output_len < info->input_len - CAAM_BLOB_OVERHEAD)
+		return -EINVAL;
+
+	return caam_process_blob(priv, info, false);
+}
+
+#endif
diff --git a/include/soc/fsl/cpm.h b/include/soc/fsl/cpm.h
new file mode 100644
index 000000000..4c24ea820
--- /dev/null
+++ b/include/soc/fsl/cpm.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <soc/fsl/qe/qe.h>
+
+/*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep[4];
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	/* Fields down below are QE-only */
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/*
+ * Function code bits, usually generic to devices.
+ */
+#ifdef CONFIG_CPM1
+#define CPMFCR_GBL	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_TC2	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_DTB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_BDB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#else
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+#endif
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_SET_TIMER	((ushort)0x0008)
+#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
+#define BD_SC_READY	(0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	(0x0400)	/* Transmit CRC */
+#define BD_SC_CM	(0x0200)	/* Continuous mode */
+#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		(0x0100)	/* xmt preamble */
+#define BD_SC_BR	(0x0020)	/* Break received */
+#define BD_SC_FR	(0x0010)	/* Framing error */
+#define BD_SC_PR	(0x0008)	/* Parity error */
+#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
+#define BD_SC_OV	(0x0002)	/* Overrun */
+#define BD_SC_UN	(0x0002)	/* Underrun */
+#define BD_SC_CD	(0x0001)	/* */
+#define BD_SC_CL	(0x0001)	/* Collision */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY	(0x8000)
+#define BD_ENET_RX_WRAP		(0x2000)
+#define BD_ENET_RX_INTR		(0x1000)
+#define BD_ENET_RX_LAST		(0x0800)
+#define BD_ENET_RX_FIRST	(0x0400)
+#define BD_ENET_RX_MISS		(0x0100)
+#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
+#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
+#define BD_ENET_RX_LG		(0x0020)
+#define BD_ENET_RX_NO		(0x0010)
+#define BD_ENET_RX_SH		(0x0008)
+#define BD_ENET_RX_CR		(0x0004)
+#define BD_ENET_RX_OV		(0x0002)
+#define BD_ENET_RX_CL		(0x0001)
+#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY	(0x8000)
+#define BD_ENET_TX_PAD		(0x4000)
+#define BD_ENET_TX_WRAP		(0x2000)
+#define BD_ENET_TX_INTR		(0x1000)
+#define BD_ENET_TX_LAST		(0x0800)
+#define BD_ENET_TX_TC		(0x0400)
+#define BD_ENET_TX_DEF		(0x0200)
+#define BD_ENET_TX_HB		(0x0100)
+#define BD_ENET_TX_LC		(0x0080)
+#define BD_ENET_TX_RL		(0x0040)
+#define BD_ENET_TX_RCMASK	(0x003c)
+#define BD_ENET_TX_UN		(0x0002)
+#define BD_ENET_TX_CSL		(0x0001)
+#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Transparent mode SCC.
+ */
+#define BD_SCC_TX_LAST		(0x0800)
+
+/* Buffer descriptor control/status used by I2C.
+ */
+#define BD_I2C_START		(0x0400)
+
+#ifdef CONFIG_CPM
+int cpm_command(u32 command, u8 opcode);
+#else
+static inline int cpm_command(u32 command, u8 opcode)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_CPM */
+
+int cpm2_gpiochip_add32(struct device *dev);
+
+#endif
diff --git a/include/soc/fsl/dpaa2-fd.h b/include/soc/fsl/dpaa2-fd.h
new file mode 100644
index 000000000..bae490cac
--- /dev/null
+++ b/include/soc/fsl/dpaa2-fd.h
@@ -0,0 +1,681 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_FD_H
+#define __FSL_DPAA2_FD_H
+
+#include <linux/byteorder/generic.h>
+#include <linux/types.h>
+
+/**
+ * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2
+ *
+ * Frame Descriptors (FDs) are used to describe frame data in the DPAA2.
+ * Frames can be enqueued and dequeued to Frame Queues (FQs) which are consumed
+ * by the various DPAA accelerators (WRIOP, SEC, PME, DCE)
+ *
+ * There are three types of frames: single, scatter gather, and frame lists.
+ *
+ * The set of APIs in this file must be used to create, manipulate and
+ * query Frame Descriptors.
+ */
+
+/**
+ * struct dpaa2_fd - Struct describing FDs
+ * @words:         for easier/faster copying the whole FD structure
+ * @addr:          address in the FD
+ * @len:           length in the FD
+ * @bpid:          buffer pool ID
+ * @format_offset: format, offset, and short-length fields
+ * @frc:           frame context
+ * @ctrl:          control bits...including dd, sc, va, err, etc
+ * @flc:           flow context address
+ *
+ * This structure represents the basic Frame Descriptor used in the system.
+ */
+struct dpaa2_fd {
+	union {
+		u32 words[8];
+		struct dpaa2_fd_simple {
+			__le64 addr;
+			__le32 len;
+			__le16 bpid;
+			__le16 format_offset;
+			__le32 frc;
+			__le32 ctrl;
+			__le64 flc;
+		} simple;
+	};
+};
+
+#define FD_SHORT_LEN_FLAG_MASK	0x1
+#define FD_SHORT_LEN_FLAG_SHIFT	14
+#define FD_SHORT_LEN_MASK	0x3FFFF
+#define FD_OFFSET_MASK		0x0FFF
+#define FD_FORMAT_MASK		0x3
+#define FD_FORMAT_SHIFT		12
+#define FD_BPID_MASK		0x3FFF
+#define SG_SHORT_LEN_FLAG_MASK	0x1
+#define SG_SHORT_LEN_FLAG_SHIFT	14
+#define SG_SHORT_LEN_MASK	0x1FFFF
+#define SG_OFFSET_MASK		0x0FFF
+#define SG_FORMAT_MASK		0x3
+#define SG_FORMAT_SHIFT		12
+#define SG_BPID_MASK		0x3FFF
+#define SG_FINAL_FLAG_MASK	0x1
+#define SG_FINAL_FLAG_SHIFT	15
+#define FL_SHORT_LEN_FLAG_MASK	0x1
+#define FL_SHORT_LEN_FLAG_SHIFT	14
+#define FL_SHORT_LEN_MASK	0x3FFFF
+#define FL_OFFSET_MASK		0x0FFF
+#define FL_FORMAT_MASK		0x3
+#define FL_FORMAT_SHIFT		12
+#define FL_BPID_MASK		0x3FFF
+#define FL_FINAL_FLAG_MASK	0x1
+#define FL_FINAL_FLAG_SHIFT	15
+
+/* Error bits in FD CTRL */
+#define FD_CTRL_ERR_MASK	0x000000FF
+#define FD_CTRL_UFD		0x00000004
+#define FD_CTRL_SBE		0x00000008
+#define FD_CTRL_FLC		0x00000010
+#define FD_CTRL_FSE		0x00000020
+#define FD_CTRL_FAERR		0x00000040
+
+/* Annotation bits in FD CTRL */
+#define FD_CTRL_PTA		0x00800000
+#define FD_CTRL_PTV1		0x00400000
+
+enum dpaa2_fd_format {
+	dpaa2_fd_single = 0,
+	dpaa2_fd_list,
+	dpaa2_fd_sg
+};
+
+/**
+ * dpaa2_fd_get_addr() - get the addr field of frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the address in the frame descriptor.
+ */
+static inline dma_addr_t dpaa2_fd_get_addr(const struct dpaa2_fd *fd)
+{
+	return (dma_addr_t)le64_to_cpu(fd->simple.addr);
+}
+
+/**
+ * dpaa2_fd_set_addr() - Set the addr field of frame descriptor
+ * @fd: the given frame descriptor
+ * @addr: the address needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_addr(struct dpaa2_fd *fd, dma_addr_t addr)
+{
+	fd->simple.addr = cpu_to_le64(addr);
+}
+
+/**
+ * dpaa2_fd_get_frc() - Get the frame context in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the frame context field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_frc(const struct dpaa2_fd *fd)
+{
+	return le32_to_cpu(fd->simple.frc);
+}
+
+/**
+ * dpaa2_fd_set_frc() - Set the frame context in the frame descriptor
+ * @fd: the given frame descriptor
+ * @frc: the frame context needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_frc(struct dpaa2_fd *fd, u32 frc)
+{
+	fd->simple.frc = cpu_to_le32(frc);
+}
+
+/**
+ * dpaa2_fd_get_ctrl() - Get the control bits in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the control bits field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_ctrl(const struct dpaa2_fd *fd)
+{
+	return le32_to_cpu(fd->simple.ctrl);
+}
+
+/**
+ * dpaa2_fd_set_ctrl() - Set the control bits in the frame descriptor
+ * @fd: the given frame descriptor
+ * @ctrl: the control bits to be set in the frame descriptor
+ */
+static inline void dpaa2_fd_set_ctrl(struct dpaa2_fd *fd, u32 ctrl)
+{
+	fd->simple.ctrl = cpu_to_le32(ctrl);
+}
+
+/**
+ * dpaa2_fd_get_flc() - Get the flow context in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the flow context in the frame descriptor.
+ */
+static inline dma_addr_t dpaa2_fd_get_flc(const struct dpaa2_fd *fd)
+{
+	return (dma_addr_t)le64_to_cpu(fd->simple.flc);
+}
+
+/**
+ * dpaa2_fd_set_flc() - Set the flow context field of frame descriptor
+ * @fd: the given frame descriptor
+ * @flc_addr: the flow context needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_flc(struct dpaa2_fd *fd,  dma_addr_t flc_addr)
+{
+	fd->simple.flc = cpu_to_le64(flc_addr);
+}
+
+static inline bool dpaa2_fd_short_len(const struct dpaa2_fd *fd)
+{
+	return !!((le16_to_cpu(fd->simple.format_offset) >>
+		  FD_SHORT_LEN_FLAG_SHIFT) & FD_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_fd_get_len() - Get the length in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the length field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_len(const struct dpaa2_fd *fd)
+{
+	if (dpaa2_fd_short_len(fd))
+		return le32_to_cpu(fd->simple.len) & FD_SHORT_LEN_MASK;
+
+	return le32_to_cpu(fd->simple.len);
+}
+
+/**
+ * dpaa2_fd_set_len() - Set the length field of frame descriptor
+ * @fd: the given frame descriptor
+ * @len: the length needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_len(struct dpaa2_fd *fd, u32 len)
+{
+	fd->simple.len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_fd_get_offset() - Get the offset field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the offset.
+ */
+static inline uint16_t dpaa2_fd_get_offset(const struct dpaa2_fd *fd)
+{
+	return le16_to_cpu(fd->simple.format_offset) & FD_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_fd_set_offset() - Set the offset field of frame descriptor
+ * @fd: the given frame descriptor
+ * @offset: the offset needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_offset(struct dpaa2_fd *fd, uint16_t offset)
+{
+	fd->simple.format_offset &= cpu_to_le16(~FD_OFFSET_MASK);
+	fd->simple.format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_fd_get_format() - Get the format field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_fd_format dpaa2_fd_get_format(
+						const struct dpaa2_fd *fd)
+{
+	return (enum dpaa2_fd_format)((le16_to_cpu(fd->simple.format_offset)
+				      >> FD_FORMAT_SHIFT) & FD_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_fd_set_format() - Set the format field of frame descriptor
+ * @fd: the given frame descriptor
+ * @format: the format needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_format(struct dpaa2_fd *fd,
+				       enum dpaa2_fd_format format)
+{
+	fd->simple.format_offset &=
+		cpu_to_le16(~(FD_FORMAT_MASK << FD_FORMAT_SHIFT));
+	fd->simple.format_offset |= cpu_to_le16(format << FD_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_fd_get_bpid() - Get the bpid field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the buffer pool id.
+ */
+static inline uint16_t dpaa2_fd_get_bpid(const struct dpaa2_fd *fd)
+{
+	return le16_to_cpu(fd->simple.bpid) & FD_BPID_MASK;
+}
+
+/**
+ * dpaa2_fd_set_bpid() - Set the bpid field of frame descriptor
+ * @fd: the given frame descriptor
+ * @bpid: buffer pool id to be set
+ */
+static inline void dpaa2_fd_set_bpid(struct dpaa2_fd *fd, uint16_t bpid)
+{
+	fd->simple.bpid &= cpu_to_le16(~(FD_BPID_MASK));
+	fd->simple.bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * struct dpaa2_sg_entry - the scatter-gathering structure
+ * @addr: address of the sg entry
+ * @len: length in this sg entry
+ * @bpid: buffer pool id
+ * @format_offset: format and offset fields
+ */
+struct dpaa2_sg_entry {
+	__le64 addr;
+	__le32 len;
+	__le16 bpid;
+	__le16 format_offset;
+};
+
+enum dpaa2_sg_format {
+	dpaa2_sg_single = 0,
+	dpaa2_sg_frame_data,
+	dpaa2_sg_sgt_ext
+};
+
+/* Accessors for SG entry fields */
+
+/**
+ * dpaa2_sg_get_addr() - Get the address from SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the address.
+ */
+static inline dma_addr_t dpaa2_sg_get_addr(const struct dpaa2_sg_entry *sg)
+{
+	return (dma_addr_t)le64_to_cpu(sg->addr);
+}
+
+/**
+ * dpaa2_sg_set_addr() - Set the address in SG entry
+ * @sg: the given scatter-gathering object
+ * @addr: the address to be set
+ */
+static inline void dpaa2_sg_set_addr(struct dpaa2_sg_entry *sg, dma_addr_t addr)
+{
+	sg->addr = cpu_to_le64(addr);
+}
+
+static inline bool dpaa2_sg_short_len(const struct dpaa2_sg_entry *sg)
+{
+	return !!((le16_to_cpu(sg->format_offset) >> SG_SHORT_LEN_FLAG_SHIFT)
+		& SG_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_sg_get_len() - Get the length in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the length.
+ */
+static inline u32 dpaa2_sg_get_len(const struct dpaa2_sg_entry *sg)
+{
+	if (dpaa2_sg_short_len(sg))
+		return le32_to_cpu(sg->len) & SG_SHORT_LEN_MASK;
+
+	return le32_to_cpu(sg->len);
+}
+
+/**
+ * dpaa2_sg_set_len() - Set the length in SG entry
+ * @sg: the given scatter-gathering object
+ * @len: the length to be set
+ */
+static inline void dpaa2_sg_set_len(struct dpaa2_sg_entry *sg, u32 len)
+{
+	sg->len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_sg_get_offset() - Get the offset in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the offset.
+ */
+static inline u16 dpaa2_sg_get_offset(const struct dpaa2_sg_entry *sg)
+{
+	return le16_to_cpu(sg->format_offset) & SG_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_sg_set_offset() - Set the offset in SG entry
+ * @sg: the given scatter-gathering object
+ * @offset: the offset to be set
+ */
+static inline void dpaa2_sg_set_offset(struct dpaa2_sg_entry *sg,
+				       u16 offset)
+{
+	sg->format_offset &= cpu_to_le16(~SG_OFFSET_MASK);
+	sg->format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_sg_get_format() - Get the SG format in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_sg_format
+	dpaa2_sg_get_format(const struct dpaa2_sg_entry *sg)
+{
+	return (enum dpaa2_sg_format)((le16_to_cpu(sg->format_offset)
+				       >> SG_FORMAT_SHIFT) & SG_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_sg_set_format() - Set the SG format in SG entry
+ * @sg: the given scatter-gathering object
+ * @format: the format to be set
+ */
+static inline void dpaa2_sg_set_format(struct dpaa2_sg_entry *sg,
+				       enum dpaa2_sg_format format)
+{
+	sg->format_offset &= cpu_to_le16(~(SG_FORMAT_MASK << SG_FORMAT_SHIFT));
+	sg->format_offset |= cpu_to_le16(format << SG_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_sg_get_bpid() - Get the buffer pool id in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the bpid.
+ */
+static inline u16 dpaa2_sg_get_bpid(const struct dpaa2_sg_entry *sg)
+{
+	return le16_to_cpu(sg->bpid) & SG_BPID_MASK;
+}
+
+/**
+ * dpaa2_sg_set_bpid() - Set the buffer pool id in SG entry
+ * @sg: the given scatter-gathering object
+ * @bpid: the bpid to be set
+ */
+static inline void dpaa2_sg_set_bpid(struct dpaa2_sg_entry *sg, u16 bpid)
+{
+	sg->bpid &= cpu_to_le16(~(SG_BPID_MASK));
+	sg->bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * dpaa2_sg_is_final() - Check final bit in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return bool.
+ */
+static inline bool dpaa2_sg_is_final(const struct dpaa2_sg_entry *sg)
+{
+	return !!(le16_to_cpu(sg->format_offset) >> SG_FINAL_FLAG_SHIFT);
+}
+
+/**
+ * dpaa2_sg_set_final() - Set the final bit in SG entry
+ * @sg: the given scatter-gathering object
+ * @final: the final boolean to be set
+ */
+static inline void dpaa2_sg_set_final(struct dpaa2_sg_entry *sg, bool final)
+{
+	sg->format_offset &= cpu_to_le16((~(SG_FINAL_FLAG_MASK
+					 << SG_FINAL_FLAG_SHIFT)) & 0xFFFF);
+	sg->format_offset |= cpu_to_le16(final << SG_FINAL_FLAG_SHIFT);
+}
+
+/**
+ * struct dpaa2_fl_entry - structure for frame list entry.
+ * @addr:          address in the FLE
+ * @len:           length in the FLE
+ * @bpid:          buffer pool ID
+ * @format_offset: format, offset, and short-length fields
+ * @frc:           frame context
+ * @ctrl:          control bits...including pta, pvt1, pvt2, err, etc
+ * @flc:           flow context address
+ */
+struct dpaa2_fl_entry {
+	__le64 addr;
+	__le32 len;
+	__le16 bpid;
+	__le16 format_offset;
+	__le32 frc;
+	__le32 ctrl;
+	__le64 flc;
+};
+
+enum dpaa2_fl_format {
+	dpaa2_fl_single = 0,
+	dpaa2_fl_res,
+	dpaa2_fl_sg
+};
+
+/**
+ * dpaa2_fl_get_addr() - get the addr field of FLE
+ * @fle: the given frame list entry
+ *
+ * Return the address in the frame list entry.
+ */
+static inline dma_addr_t dpaa2_fl_get_addr(const struct dpaa2_fl_entry *fle)
+{
+	return (dma_addr_t)le64_to_cpu(fle->addr);
+}
+
+/**
+ * dpaa2_fl_set_addr() - Set the addr field of FLE
+ * @fle: the given frame list entry
+ * @addr: the address needs to be set in frame list entry
+ */
+static inline void dpaa2_fl_set_addr(struct dpaa2_fl_entry *fle,
+				     dma_addr_t addr)
+{
+	fle->addr = cpu_to_le64(addr);
+}
+
+/**
+ * dpaa2_fl_get_frc() - Get the frame context in the FLE
+ * @fle: the given frame list entry
+ *
+ * Return the frame context field in the frame lsit entry.
+ */
+static inline u32 dpaa2_fl_get_frc(const struct dpaa2_fl_entry *fle)
+{
+	return le32_to_cpu(fle->frc);
+}
+
+/**
+ * dpaa2_fl_set_frc() - Set the frame context in the FLE
+ * @fle: the given frame list entry
+ * @frc: the frame context needs to be set in frame list entry
+ */
+static inline void dpaa2_fl_set_frc(struct dpaa2_fl_entry *fle, u32 frc)
+{
+	fle->frc = cpu_to_le32(frc);
+}
+
+/**
+ * dpaa2_fl_get_ctrl() - Get the control bits in the FLE
+ * @fle: the given frame list entry
+ *
+ * Return the control bits field in the frame list entry.
+ */
+static inline u32 dpaa2_fl_get_ctrl(const struct dpaa2_fl_entry *fle)
+{
+	return le32_to_cpu(fle->ctrl);
+}
+
+/**
+ * dpaa2_fl_set_ctrl() - Set the control bits in the FLE
+ * @fle: the given frame list entry
+ * @ctrl: the control bits to be set in the frame list entry
+ */
+static inline void dpaa2_fl_set_ctrl(struct dpaa2_fl_entry *fle, u32 ctrl)
+{
+	fle->ctrl = cpu_to_le32(ctrl);
+}
+
+/**
+ * dpaa2_fl_get_flc() - Get the flow context in the FLE
+ * @fle: the given frame list entry
+ *
+ * Return the flow context in the frame list entry.
+ */
+static inline dma_addr_t dpaa2_fl_get_flc(const struct dpaa2_fl_entry *fle)
+{
+	return (dma_addr_t)le64_to_cpu(fle->flc);
+}
+
+/**
+ * dpaa2_fl_set_flc() - Set the flow context field of FLE
+ * @fle: the given frame list entry
+ * @flc_addr: the flow context needs to be set in frame list entry
+ */
+static inline void dpaa2_fl_set_flc(struct dpaa2_fl_entry *fle,
+				    dma_addr_t flc_addr)
+{
+	fle->flc = cpu_to_le64(flc_addr);
+}
+
+static inline bool dpaa2_fl_short_len(const struct dpaa2_fl_entry *fle)
+{
+	return !!((le16_to_cpu(fle->format_offset) >>
+		  FL_SHORT_LEN_FLAG_SHIFT) & FL_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_fl_get_len() - Get the length in the FLE
+ * @fle: the given frame list entry
+ *
+ * Return the length field in the frame list entry.
+ */
+static inline u32 dpaa2_fl_get_len(const struct dpaa2_fl_entry *fle)
+{
+	if (dpaa2_fl_short_len(fle))
+		return le32_to_cpu(fle->len) & FL_SHORT_LEN_MASK;
+
+	return le32_to_cpu(fle->len);
+}
+
+/**
+ * dpaa2_fl_set_len() - Set the length field of FLE
+ * @fle: the given frame list entry
+ * @len: the length needs to be set in frame list entry
+ */
+static inline void dpaa2_fl_set_len(struct dpaa2_fl_entry *fle, u32 len)
+{
+	fle->len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_fl_get_offset() - Get the offset field in the frame list entry
+ * @fle: the given frame list entry
+ *
+ * Return the offset.
+ */
+static inline u16 dpaa2_fl_get_offset(const struct dpaa2_fl_entry *fle)
+{
+	return le16_to_cpu(fle->format_offset) & FL_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_fl_set_offset() - Set the offset field of FLE
+ * @fle: the given frame list entry
+ * @offset: the offset needs to be set in frame list entry
+ */
+static inline void dpaa2_fl_set_offset(struct dpaa2_fl_entry *fle, u16 offset)
+{
+	fle->format_offset &= cpu_to_le16(~FL_OFFSET_MASK);
+	fle->format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_fl_get_format() - Get the format field in the FLE
+ * @fle: the given frame list entry
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_fl_format dpaa2_fl_get_format(const struct dpaa2_fl_entry *fle)
+{
+	return (enum dpaa2_fl_format)((le16_to_cpu(fle->format_offset) >>
+				       FL_FORMAT_SHIFT) & FL_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_fl_set_format() - Set the format field of FLE
+ * @fle: the given frame list entry
+ * @format: the format needs to be set in frame list entry
+ */
+static inline void dpaa2_fl_set_format(struct dpaa2_fl_entry *fle,
+				       enum dpaa2_fl_format format)
+{
+	fle->format_offset &= cpu_to_le16(~(FL_FORMAT_MASK << FL_FORMAT_SHIFT));
+	fle->format_offset |= cpu_to_le16(format << FL_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_fl_get_bpid() - Get the bpid field in the FLE
+ * @fle: the given frame list entry
+ *
+ * Return the buffer pool id.
+ */
+static inline u16 dpaa2_fl_get_bpid(const struct dpaa2_fl_entry *fle)
+{
+	return le16_to_cpu(fle->bpid) & FL_BPID_MASK;
+}
+
+/**
+ * dpaa2_fl_set_bpid() - Set the bpid field of FLE
+ * @fle: the given frame list entry
+ * @bpid: buffer pool id to be set
+ */
+static inline void dpaa2_fl_set_bpid(struct dpaa2_fl_entry *fle, u16 bpid)
+{
+	fle->bpid &= cpu_to_le16(~(FL_BPID_MASK));
+	fle->bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * dpaa2_fl_is_final() - Check final bit in FLE
+ * @fle: the given frame list entry
+ *
+ * Return bool.
+ */
+static inline bool dpaa2_fl_is_final(const struct dpaa2_fl_entry *fle)
+{
+	return !!(le16_to_cpu(fle->format_offset) >> FL_FINAL_FLAG_SHIFT);
+}
+
+/**
+ * dpaa2_fl_set_final() - Set the final bit in FLE
+ * @fle: the given frame list entry
+ * @final: the final boolean to be set
+ */
+static inline void dpaa2_fl_set_final(struct dpaa2_fl_entry *fle, bool final)
+{
+	fle->format_offset &= cpu_to_le16((~(FL_FINAL_FLAG_MASK <<
+					     FL_FINAL_FLAG_SHIFT)) & 0xFFFF);
+	fle->format_offset |= cpu_to_le16(final << FL_FINAL_FLAG_SHIFT);
+}
+
+#endif /* __FSL_DPAA2_FD_H */
diff --git a/include/soc/fsl/dpaa2-global.h b/include/soc/fsl/dpaa2-global.h
new file mode 100644
index 000000000..2bfc379d3
--- /dev/null
+++ b/include/soc/fsl/dpaa2-global.h
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_GLOBAL_H
+#define __FSL_DPAA2_GLOBAL_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include "dpaa2-fd.h"
+
+struct dpaa2_dq {
+	union {
+		struct common {
+			u8 verb;
+			u8 reserved[63];
+		} common;
+		struct dq {
+			u8 verb;
+			u8 stat;
+			__le16 seqnum;
+			__le16 oprid;
+			u8 reserved;
+			u8 tok;
+			__le32 fqid;
+			u32 reserved2;
+			__le32 fq_byte_cnt;
+			__le32 fq_frm_cnt;
+			__le64 fqd_ctx;
+			u8 fd[32];
+		} dq;
+		struct scn {
+			u8 verb;
+			u8 stat;
+			u8 state;
+			u8 reserved;
+			__le32 rid_tok;
+			__le64 ctx;
+		} scn;
+	};
+};
+
+/* Parsing frame dequeue results */
+/* FQ empty */
+#define DPAA2_DQ_STAT_FQEMPTY       0x80
+/* FQ held active */
+#define DPAA2_DQ_STAT_HELDACTIVE    0x40
+/* FQ force eligible */
+#define DPAA2_DQ_STAT_FORCEELIGIBLE 0x20
+/* valid frame */
+#define DPAA2_DQ_STAT_VALIDFRAME    0x10
+/* FQ ODP enable */
+#define DPAA2_DQ_STAT_ODPVALID      0x04
+/* volatile dequeue */
+#define DPAA2_DQ_STAT_VOLATILE      0x02
+/* volatile dequeue command is expired */
+#define DPAA2_DQ_STAT_EXPIRED       0x01
+
+#define DQ_FQID_MASK		0x00FFFFFF
+#define DQ_FRAME_COUNT_MASK	0x00FFFFFF
+
+/**
+ * dpaa2_dq_flags() - Get the stat field of dequeue response
+ * @dq: the dequeue result.
+ */
+static inline u32 dpaa2_dq_flags(const struct dpaa2_dq *dq)
+{
+	return dq->dq.stat;
+}
+
+/**
+ * dpaa2_dq_is_pull() - Check whether the dq response is from a pull
+ *                      command.
+ * @dq: the dequeue result
+ *
+ * Return 1 for volatile(pull) dequeue, 0 for static dequeue.
+ */
+static inline int dpaa2_dq_is_pull(const struct dpaa2_dq *dq)
+{
+	return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_VOLATILE);
+}
+
+/**
+ * dpaa2_dq_is_pull_complete() - Check whether the pull command is completed.
+ * @dq: the dequeue result
+ *
+ * Return boolean.
+ */
+static inline bool dpaa2_dq_is_pull_complete(const struct dpaa2_dq *dq)
+{
+	return !!(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_EXPIRED);
+}
+
+/**
+ * dpaa2_dq_seqnum() - Get the seqnum field in dequeue response
+ * @dq: the dequeue result
+ *
+ * seqnum is valid only if VALIDFRAME flag is TRUE
+ *
+ * Return seqnum.
+ */
+static inline u16 dpaa2_dq_seqnum(const struct dpaa2_dq *dq)
+{
+	return le16_to_cpu(dq->dq.seqnum);
+}
+
+/**
+ * dpaa2_dq_odpid() - Get the odpid field in dequeue response
+ * @dq: the dequeue result
+ *
+ * odpid is valid only if ODPVALID flag is TRUE.
+ *
+ * Return odpid.
+ */
+static inline u16 dpaa2_dq_odpid(const struct dpaa2_dq *dq)
+{
+	return le16_to_cpu(dq->dq.oprid);
+}
+
+/**
+ * dpaa2_dq_fqid() - Get the fqid in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return fqid.
+ */
+static inline u32 dpaa2_dq_fqid(const struct dpaa2_dq *dq)
+{
+	return le32_to_cpu(dq->dq.fqid) & DQ_FQID_MASK;
+}
+
+/**
+ * dpaa2_dq_byte_count() - Get the byte count in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the byte count remaining in the FQ.
+ */
+static inline u32 dpaa2_dq_byte_count(const struct dpaa2_dq *dq)
+{
+	return le32_to_cpu(dq->dq.fq_byte_cnt);
+}
+
+/**
+ * dpaa2_dq_frame_count() - Get the frame count in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame count remaining in the FQ.
+ */
+static inline u32 dpaa2_dq_frame_count(const struct dpaa2_dq *dq)
+{
+	return le32_to_cpu(dq->dq.fq_frm_cnt) & DQ_FRAME_COUNT_MASK;
+}
+
+/**
+ * dpaa2_dq_fd_ctx() - Get the frame queue context in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame queue context.
+ */
+static inline u64 dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq)
+{
+	return le64_to_cpu(dq->dq.fqd_ctx);
+}
+
+/**
+ * dpaa2_dq_fd() - Get the frame descriptor in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame descriptor.
+ */
+static inline const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq)
+{
+	return (const struct dpaa2_fd *)&dq->dq.fd[0];
+}
+
+#define DPAA2_CSCN_SIZE		sizeof(struct dpaa2_dq)
+#define DPAA2_CSCN_ALIGN	16
+#define DPAA2_CSCN_STATE_CG	BIT(0)
+
+/**
+ * dpaa2_cscn_state_congested() - Check congestion state
+ * @cscn: congestion SCN (delivered to WQ or memory)
+ *
+i * Return true is congested.
+ */
+static inline bool dpaa2_cscn_state_congested(struct dpaa2_dq *cscn)
+{
+	return !!(cscn->scn.state & DPAA2_CSCN_STATE_CG);
+}
+
+#endif /* __FSL_DPAA2_GLOBAL_H */
diff --git a/include/soc/fsl/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h
new file mode 100644
index 000000000..4bf62de2e
--- /dev/null
+++ b/include/soc/fsl/dpaa2-io.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2017-2019 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_IO_H
+#define __FSL_DPAA2_IO_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+
+#include "dpaa2-fd.h"
+#include "dpaa2-global.h"
+
+struct dpaa2_io;
+struct dpaa2_io_store;
+struct device;
+
+/**
+ * DOC: DPIO Service
+ *
+ * The DPIO service provides APIs for users to interact with the datapath
+ * by enqueueing and dequeing frame descriptors.
+ *
+ * The following set of APIs can be used to enqueue and dequeue frames
+ * as well as producing notification callbacks when data is available
+ * for dequeue.
+ */
+
+#define DPAA2_IO_ANY_CPU	-1
+
+/**
+ * struct dpaa2_io_desc - The DPIO descriptor
+ * @receives_notifications: Use notificaton mode. Non-zero if the DPIO
+ *                  has a channel.
+ * @has_8prio:      Set to non-zero for channel with 8 priority WQs.  Ignored
+ *                  unless receives_notification is TRUE.
+ * @cpu:            The cpu index that at least interrupt handlers will
+ *                  execute on.
+ * @stash_affinity: The stash affinity for this portal favour 'cpu'
+ * @regs_cena:      The cache enabled regs.
+ * @regs_cinh:      The cache inhibited regs
+ * @dpio_id:        The dpio index
+ * @qman_version:   The qman version
+ * @qman_clk:       The qman clock frequency in Hz
+ *
+ * Describes the attributes and features of the DPIO object.
+ */
+struct dpaa2_io_desc {
+	int receives_notifications;
+	int has_8prio;
+	int cpu;
+	void *regs_cena;
+	void __iomem *regs_cinh;
+	int dpio_id;
+	u32 qman_version;
+	u32 qman_clk;
+};
+
+struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc,
+				 struct device *dev);
+
+void dpaa2_io_down(struct dpaa2_io *d);
+
+irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj);
+
+struct dpaa2_io *dpaa2_io_service_select(int cpu);
+
+/**
+ * struct dpaa2_io_notification_ctx - The DPIO notification context structure
+ * @cb:           The callback to be invoked when the notification arrives
+ * @is_cdan:      Zero for FQDAN, non-zero for CDAN
+ * @id:           FQID or channel ID, needed for rearm
+ * @desired_cpu:  The cpu on which the notifications will show up. Use
+ *                DPAA2_IO_ANY_CPU if don't care
+ * @dpio_id:      The dpio index
+ * @qman64:       The 64-bit context value shows up in the FQDAN/CDAN.
+ * @node:         The list node
+ * @dpio_private: The dpio object internal to dpio_service
+ *
+ * Used when a FQDAN/CDAN registration is made by drivers.
+ */
+struct dpaa2_io_notification_ctx {
+	void (*cb)(struct dpaa2_io_notification_ctx *ctx);
+	int is_cdan;
+	u32 id;
+	int desired_cpu;
+	int dpio_id;
+	u64 qman64;
+	struct list_head node;
+	void *dpio_private;
+};
+
+int dpaa2_io_get_cpu(struct dpaa2_io *d);
+
+int dpaa2_io_service_register(struct dpaa2_io *service,
+			      struct dpaa2_io_notification_ctx *ctx,
+			      struct device *dev);
+void dpaa2_io_service_deregister(struct dpaa2_io *service,
+				 struct dpaa2_io_notification_ctx *ctx,
+				 struct device *dev);
+int dpaa2_io_service_rearm(struct dpaa2_io *service,
+			   struct dpaa2_io_notification_ctx *ctx);
+
+int dpaa2_io_service_pull_fq(struct dpaa2_io *d, u32 fqid,
+			     struct dpaa2_io_store *s);
+int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
+				  struct dpaa2_io_store *s);
+
+int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, u32 fqid,
+				const struct dpaa2_fd *fd);
+int dpaa2_io_service_enqueue_multiple_fq(struct dpaa2_io *d, u32 fqid,
+				const struct dpaa2_fd *fd, int number_of_frame);
+int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d, u32 *fqid,
+				const struct dpaa2_fd *fd, int number_of_frame);
+int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
+				u16 qdbin, const struct dpaa2_fd *fd);
+int dpaa2_io_service_release(struct dpaa2_io *d, u16 bpid,
+			     const u64 *buffers, unsigned int num_buffers);
+int dpaa2_io_service_acquire(struct dpaa2_io *d, u16 bpid,
+			     u64 *buffers, unsigned int num_buffers);
+
+struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
+					     struct device *dev);
+void dpaa2_io_store_destroy(struct dpaa2_io_store *s);
+struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last);
+
+int dpaa2_io_query_fq_count(struct dpaa2_io *d, u32 fqid,
+			    u32 *fcnt, u32 *bcnt);
+int dpaa2_io_query_bp_count(struct dpaa2_io *d, u16 bpid,
+			    u32 *num);
+
+int dpaa2_io_set_irq_coalescing(struct dpaa2_io *d, u32 irq_holdoff);
+void dpaa2_io_get_irq_coalescing(struct dpaa2_io *d, u32 *irq_holdoff);
+void dpaa2_io_set_adaptive_coalescing(struct dpaa2_io *d,
+				      int use_adaptive_rx_coalesce);
+int dpaa2_io_get_adaptive_coalescing(struct dpaa2_io *d);
+void dpaa2_io_update_net_dim(struct dpaa2_io *d, __u64 frames, __u64 bytes);
+#endif /* __FSL_DPAA2_IO_H */
diff --git a/include/soc/fsl/qe/immap_qe.h b/include/soc/fsl/qe/immap_qe.h
new file mode 100644
index 000000000..edd601f53
--- /dev/null
+++ b/include/soc/fsl/qe/immap_qe.h
@@ -0,0 +1,466 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+#include <asm/io.h>
+
+#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+	__be32	iadd;		/* I-RAM Address Register */
+	__be32	idata;		/* I-RAM Data Register */
+	u8	res0[0x04];
+	__be32	iready;		/* I-RAM Ready Register */
+	u8	res1[0x70];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+	__be32	qicr;
+	__be32	qivec;
+	__be32	qripnr;
+	__be32	qipnr;
+	__be32	qipxcc;
+	__be32	qipycc;
+	__be32	qipwcc;
+	__be32	qipzcc;
+	__be32	qimr;
+	__be32	qrimr;
+	__be32	qicnr;
+	u8	res0[0x4];
+	__be32	qiprta;
+	__be32	qiprtb;
+	u8	res1[0x4];
+	__be32	qricr;
+	u8	res2[0x20];
+	__be32	qhivec;
+	u8	res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+	__be32	cecr;		/* QE command register */
+	__be32	ceccr;		/* QE controller configuration register */
+	__be32	cecdr;		/* QE command data register */
+	u8	res0[0xA];
+	__be16	ceter;		/* QE timer event register */
+	u8	res1[0x2];
+	__be16	cetmr;		/* QE timers mask register */
+	__be32	cetscr;		/* QE time-stamp timer control register */
+	__be32	cetsr1;		/* QE time-stamp register 1 */
+	__be32	cetsr2;		/* QE time-stamp register 2 */
+	u8	res2[0x8];
+	__be32	cevter;		/* QE virtual tasks event register */
+	__be32	cevtmr;		/* QE virtual tasks mask register */
+	__be16	cercr;		/* QE RAM control register */
+	u8	res3[0x2];
+	u8	res4[0x24];
+	__be16	ceexe1;		/* QE external request 1 event register */
+	u8	res5[0x2];
+	__be16	ceexm1;		/* QE external request 1 mask register */
+	u8	res6[0x2];
+	__be16	ceexe2;		/* QE external request 2 event register */
+	u8	res7[0x2];
+	__be16	ceexm2;		/* QE external request 2 mask register */
+	u8	res8[0x2];
+	__be16	ceexe3;		/* QE external request 3 event register */
+	u8	res9[0x2];
+	__be16	ceexm3;		/* QE external request 3 mask register */
+	u8	res10[0x2];
+	__be16	ceexe4;		/* QE external request 4 event register */
+	u8	res11[0x2];
+	__be16	ceexm4;		/* QE external request 4 mask register */
+	u8	res12[0x3A];
+	__be32	ceurnr;		/* QE microcode revision number register */
+	u8	res13[0x244];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+	__be32	cmxgcr;		/* CMX general clock route register */
+	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
+	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
+	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
+	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
+	__be32	cmxupcr;	/* CMX UPC clock route register */
+	u8	res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+	__be32	brgc[16];	/* BRG configuration registers */
+	u8	res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+	u8	res0[0x20];
+	__be32	spmode;		/* SPI mode register */
+	u8	res1[0x2];
+	u8	spie;		/* SPI event register */
+	u8	res2[0x1];
+	u8	res3[0x2];
+	u8	spim;		/* SPI mask register */
+	u8	res4[0x1];
+	u8	res5[0x1];
+	u8	spcom;		/* SPI command register */
+	u8	res6[0x2];
+	__be32	spitd;		/* SPI transmit data register (cpu mode) */
+	__be32	spird;		/* SPI receive data register (cpu mode) */
+	u8	res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+	__be16	sixmr1[4];	/* SI1 TDMx (x = A B C D) mode register */
+	u8	siglmr1_h;	/* SI1 global mode register high */
+	u8	res0[0x1];
+	u8	sicmdr1_h;	/* SI1 command register high */
+	u8	res2[0x1];
+	u8	sistr1_h;	/* SI1 status register high */
+	u8	res3[0x1];
+	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
+	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
+	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
+	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
+	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
+	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
+	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
+	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
+	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
+	u8	res4[0x8];
+	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
+	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
+	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
+	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
+	u8	res5[0x1];
+	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
+	u8	res6[0x1];
+	u8	sistr1_l;	/* SI1 status register low 8 bits */
+	u8	res7[0x1];
+	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
+	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
+	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
+	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
+	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
+	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
+	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
+	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
+	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
+	u8	res8[0x8];
+	__be32	siml1;		/* SI1 multiframe limit register */
+	u8	siedm1;		/* SI1 extended diagnostic mode register */
+	u8	res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+	u8 	tx[0x400];
+	u8	rx[0x400];
+	u8	res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct qe_usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16  usb_usep[4];
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct qe_mcc {
+	__be32	mcce;		/* MCC event register */
+	__be32	mccm;		/* MCC mask register */
+	__be32	mccf;		/* MCC configuration register */
+	__be32	merl;		/* MCC emergency request level register */
+	u8	res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+	__be32	gumr_l;		/* UCCx general mode register (low) */
+	__be32	gumr_h;		/* UCCx general mode register (high) */
+	__be16	upsmr;		/* UCCx protocol-specific mode register */
+	u8	res0[0x2];
+	__be16	utodr;		/* UCCx transmit on demand register */
+	__be16	udsr;		/* UCCx data synchronization register */
+	__be16	ucce;		/* UCCx event register */
+	u8	res1[0x2];
+	__be16	uccm;		/* UCCx mask register */
+	u8	res2[0x1];
+	u8	uccs;		/* UCCx status register */
+	u8	res3[0x24];
+	__be16	utpt;
+	u8	res4[0x52];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+	__be32	gumr;		/* UCCx general mode register */
+	__be32	upsmr;		/* UCCx protocol-specific mode register */
+	__be16	utodr;		/* UCCx transmit on demand register */
+	u8	res0[0x2];
+	__be16	udsr;		/* UCCx data synchronization register */
+	u8	res1[0x2];
+	__be32	ucce;		/* UCCx event register */
+	__be32	uccm;		/* UCCx mask register */
+	u8	uccs;		/* UCCx status register */
+	u8	res2[0x7];
+	__be32	urfb;		/* UCC receive FIFO base */
+	__be16	urfs;		/* UCC receive FIFO size */
+	u8	res3[0x2];
+	__be16	urfet;		/* UCC receive FIFO emergency threshold */
+	__be16	urfset;		/* UCC receive FIFO special emergency
+				   threshold */
+	__be32	utfb;		/* UCC transmit FIFO base */
+	__be16	utfs;		/* UCC transmit FIFO size */
+	u8	res4[0x2];
+	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
+	u8	res5[0x2];
+	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
+	u8	res6[0x2];
+	__be16	utpt;		/* UCC transmit polling timer */
+	u8	res7[0x2];
+	__be32	urtry;		/* UCC retry counter register */
+	u8	res8[0x4C];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+struct ucc {
+	union {
+		struct	ucc_slow slow;
+		struct	ucc_fast fast;
+		u8	res[0x200];	/* UCC blocks are 512 bytes each */
+	};
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+	__be32	upgcr;		/* UTOPIA/POS general configuration register */
+	__be32	uplpa;		/* UTOPIA/POS last PHY address */
+	__be32	uphec;		/* ATM HEC register */
+	__be32	upuc;		/* UTOPIA/POS UCC configuration */
+	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
+	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
+	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
+	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
+	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
+	u8	res0[0xC];
+	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
+	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
+	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
+	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
+	__be32	upde1;		/* UTOPIA/POS device 1 event */
+	__be32	upde2;		/* UTOPIA/POS device 2 event */
+	__be32	upde3;		/* UTOPIA/POS device 3 event */
+	__be32	upde4;		/* UTOPIA/POS device 4 event */
+	__be16	uprp1;
+	__be16	uprp2;
+	__be16	uprp3;
+	__be16	uprp4;
+	u8	res1[0x8];
+	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
+	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
+	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
+	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
+	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
+	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
+	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
+	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
+	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
+	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
+	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
+	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
+	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
+	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
+	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
+	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
+	__be32	uper1;		/* Device 1 port enable register */
+	__be32	uper2;		/* Device 2 port enable register */
+	__be32	uper3;		/* Device 3 port enable register */
+	__be32	uper4;		/* Device 4 port enable register */
+	u8	res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+	__be32	sdsr;		/* Serial DMA status register */
+	__be32	sdmr;		/* Serial DMA mode register */
+	__be32	sdtr1;		/* SDMA system bus threshold register */
+	__be32	sdtr2;		/* SDMA secondary bus threshold register */
+	__be32	sdhy1;		/* SDMA system bus hysteresis register */
+	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
+	__be32	sdta1;		/* SDMA system bus address register */
+	__be32	sdta2;		/* SDMA secondary bus address register */
+	__be32	sdtm1;		/* SDMA system bus MSNUM register */
+	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8	res0[0x10];
+	__be32	sdaqr;		/* SDMA address bus qualify register */
+	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
+	u8	res1[0x4];
+	__be32	sdebcr;		/* SDMA CAM entries base register */
+	u8	res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+	__be32	bpdcr;		/* Breakpoint debug command register */
+	__be32	bpdsr;		/* Breakpoint debug status register */
+	__be32	bpdmr;		/* Breakpoint debug mask register */
+	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
+	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
+	u8	res0[0x8];
+	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
+	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
+	u8	res1[0x8];
+	__be32	bprmir;		/* Breakpoint request mode immediate register */
+	__be32	bprmsr;		/* Breakpoint request mode serial register */
+	__be32	bpemr;		/* Breakpoint exit mode register */
+	u8	res2[0x48];
+} __attribute__ ((packed));
+
+/*
+ * RISC Special Registers (Trap and Breakpoint).  These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
+	u8 res0[64];
+	__be32 ibcr0;
+	__be32 ibs0;
+	__be32 ibcnr0;
+	u8 res1[4];
+	__be32 ibcr1;
+	__be32 ibs1;
+	__be32 ibcnr1;
+	__be32 npcr;
+	__be32 dbcr;
+	__be32 dbar;
+	__be32 dbamr;
+	__be32 dbsr;
+	__be32 dbcnr;
+	u8 res2[12];
+	__be32 dbdr_h;
+	__be32 dbdr_l;
+	__be32 dbdmr_h;
+	__be32 dbdmr_l;
+	__be32 bsr;
+	__be32 bor;
+	__be32 bior;
+	u8 res3[4];
+	__be32 iatr[4];
+	__be32 eccr;		/* Exception control configuration register */
+	__be32 eicr;
+	u8 res4[0x100-0xf8];
+} __attribute__ ((packed));
+
+struct qe_immap {
+	struct qe_iram		iram;		/* I-RAM */
+	struct qe_ic_regs	ic;		/* Interrupt Controller */
+	struct cp_qe		cp;		/* Communications Processor */
+	struct qe_mux		qmx;		/* QE Multiplexer */
+	struct qe_timers	qet;		/* QE Timers */
+	struct spi		spi[0x2];	/* spi */
+	struct qe_mcc		mcc;		/* mcc */
+	struct qe_brg		brg;		/* brg */
+	struct qe_usb_ctlr	usb;		/* USB */
+	struct si1		si1;		/* SI */
+	u8			res11[0x800];
+	struct sir		sir;		/* SI Routing Tables */
+	struct ucc		ucc1;		/* ucc1 */
+	struct ucc		ucc3;		/* ucc3 */
+	struct ucc		ucc5;		/* ucc5 */
+	struct ucc		ucc7;		/* ucc7 */
+	u8			res12[0x600];
+	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
+	struct ucc		ucc2;		/* ucc2 */
+	struct ucc		ucc4;		/* ucc4 */
+	struct ucc		ucc6;		/* ucc6 */
+	struct ucc		ucc8;		/* ucc8 */
+	u8			res13[0x600];
+	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
+	struct sdma		sdma;		/* SDMA */
+	struct dbg		dbg;		/* 0x104080 - 0x1040FF
+						   Debug Space */
+	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
+						   RISC Special Registers
+						   (Trap and Breakpoint) */
+	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
+	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
+	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
+	u8			muram[0xC000];	/* 0x110000 - 0x11C000
+						   Multi-user RAM */
+	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
+	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap __iomem *qe_immr;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
new file mode 100644
index 000000000..b02e9fe69
--- /dev/null
+++ b/include/soc/fsl/qe/qe.h
@@ -0,0 +1,811 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/genalloc.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <soc/fsl/cpm.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/types.h>
+
+#define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
+#define QE_NUM_OF_BRGS	16
+#define QE_NUM_OF_PORTS	1024
+
+/* Clocks and BRGs */
+enum qe_clock {
+	QE_CLK_NONE = 0,
+	QE_BRG1,		/* Baud Rate Generator 1 */
+	QE_BRG2,		/* Baud Rate Generator 2 */
+	QE_BRG3,		/* Baud Rate Generator 3 */
+	QE_BRG4,		/* Baud Rate Generator 4 */
+	QE_BRG5,		/* Baud Rate Generator 5 */
+	QE_BRG6,		/* Baud Rate Generator 6 */
+	QE_BRG7,		/* Baud Rate Generator 7 */
+	QE_BRG8,		/* Baud Rate Generator 8 */
+	QE_BRG9,		/* Baud Rate Generator 9 */
+	QE_BRG10,		/* Baud Rate Generator 10 */
+	QE_BRG11,		/* Baud Rate Generator 11 */
+	QE_BRG12,		/* Baud Rate Generator 12 */
+	QE_BRG13,		/* Baud Rate Generator 13 */
+	QE_BRG14,		/* Baud Rate Generator 14 */
+	QE_BRG15,		/* Baud Rate Generator 15 */
+	QE_BRG16,		/* Baud Rate Generator 16 */
+	QE_CLK1,		/* Clock 1 */
+	QE_CLK2,		/* Clock 2 */
+	QE_CLK3,		/* Clock 3 */
+	QE_CLK4,		/* Clock 4 */
+	QE_CLK5,		/* Clock 5 */
+	QE_CLK6,		/* Clock 6 */
+	QE_CLK7,		/* Clock 7 */
+	QE_CLK8,		/* Clock 8 */
+	QE_CLK9,		/* Clock 9 */
+	QE_CLK10,		/* Clock 10 */
+	QE_CLK11,		/* Clock 11 */
+	QE_CLK12,		/* Clock 12 */
+	QE_CLK13,		/* Clock 13 */
+	QE_CLK14,		/* Clock 14 */
+	QE_CLK15,		/* Clock 15 */
+	QE_CLK16,		/* Clock 16 */
+	QE_CLK17,		/* Clock 17 */
+	QE_CLK18,		/* Clock 18 */
+	QE_CLK19,		/* Clock 19 */
+	QE_CLK20,		/* Clock 20 */
+	QE_CLK21,		/* Clock 21 */
+	QE_CLK22,		/* Clock 22 */
+	QE_CLK23,		/* Clock 23 */
+	QE_CLK24,		/* Clock 24 */
+	QE_RSYNC_PIN,		/* RSYNC from pin */
+	QE_TSYNC_PIN,		/* TSYNC from pin */
+	QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+	return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+#ifdef CONFIG_QUICC_ENGINE
+extern void qe_reset(void);
+#else
+static inline void qe_reset(void) {}
+#endif
+
+int cpm_muram_init(void);
+
+#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
+s32 cpm_muram_alloc(unsigned long size, unsigned long align);
+void cpm_muram_free(s32 offset);
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(const void __iomem *addr);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+void cpm_muram_free_addr(const void __iomem *addr);
+#else
+static inline s32 cpm_muram_alloc(unsigned long size,
+				  unsigned long align)
+{
+	return -ENOSYS;
+}
+
+static inline void cpm_muram_free(s32 offset)
+{
+}
+
+static inline s32 cpm_muram_alloc_fixed(unsigned long offset,
+					unsigned long size)
+{
+	return -ENOSYS;
+}
+
+static inline void __iomem *cpm_muram_addr(unsigned long offset)
+{
+	return NULL;
+}
+
+static inline unsigned long cpm_muram_offset(const void __iomem *addr)
+{
+	return -ENOSYS;
+}
+
+static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+	return 0;
+}
+static inline void cpm_muram_free_addr(const void __iomem *addr)
+{
+}
+#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+	__be32	cpodr;		/* Open drain register */
+	__be32	cpdata;		/* Data register */
+	__be32	cpdir1;		/* Direction register */
+	__be32	cpdir2;		/* Direction register */
+	__be32	cppar1;		/* Pin assignment register */
+	__be32	cppar2;		/* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+	u8	pad[8];
+#endif
+};
+
+#define QE_PIO_DIR_IN	2
+#define QE_PIO_DIR_OUT	1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+				int dir, int open_drain, int assignment,
+				int has_irq);
+#ifdef CONFIG_QUICC_ENGINE
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+			     int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+#else
+static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		int assignment, int has_irq) { return -ENOSYS; }
+static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
+#endif /* CONFIG_QUICC_ENGINE */
+
+/*
+ * Pin multiplexing functions.
+ */
+struct qe_pin;
+#ifdef CONFIG_QE_GPIO
+extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern void qe_pin_free(struct qe_pin *qe_pin);
+extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
+extern void qe_pin_set_dedicated(struct qe_pin *pin);
+#else
+static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+	return ERR_PTR(-ENOSYS);
+}
+static inline void qe_pin_free(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
+#endif /* CONFIG_QE_GPIO */
+
+#ifdef CONFIG_QUICC_ENGINE
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+			       u32 cmd_input)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+	/*
+	 * MPC8568E reference manual says:
+	 *
+	 * "...power down sequence waits for all I/O interfaces to become idle.
+	 *  In some applications this may happen eventually without actively
+	 *  shutting down interfaces, but most likely, software will have to
+	 *  take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+	 *  interfaces before issuing the command (either the write to the core
+	 *  MSR[WE] as described above or writing to POWMGTCSR) to put the
+	 *  device into sleep state."
+	 *
+	 * MPC8569E reference manual has a similar paragraph.
+	 */
+#ifdef CONFIG_PPC_85xx
+	return 0;
+#else
+	return 1;
+#endif
+}
+
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
+#define qe_muram_dma cpm_muram_dma
+#define qe_muram_free_addr cpm_muram_free_addr
+
+#define qe_setbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) |  (_v), (_addr))
+#define qe_clrbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
+
+#define qe_setbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) |  (_v), (_addr))
+#define qe_clrbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
+
+#define qe_setbits_8(_addr, _v) iowrite8(ioread8(_addr) |  (_v), (_addr))
+#define qe_clrbits_8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
+
+#define qe_clrsetbits_be32(addr, clear, set) \
+	iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
+#define qe_clrsetbits_be16(addr, clear, set) \
+	iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
+#define qe_clrsetbits_8(addr, clear, set) \
+	iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe_firmware.rst for a description of these
+ * fields.
+ */
+struct qe_firmware {
+	struct qe_header {
+		__be32 length;  /* Length of the entire structure, in bytes */
+		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
+		u8 version;     /* Version of this layout. First ver is '1' */
+	} header;
+	u8 id[62];      /* Null-terminated identifier string */
+	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
+	u8 count;       /* Number of microcode[] structures */
+	struct {
+		__be16 model;   	/* The SOC model  */
+		u8 major;       	/* The SOC revision major */
+		u8 minor;       	/* The SOC revision minor */
+	} __attribute__ ((packed)) soc;
+	u8 padding[4];			/* Reserved, for alignment */
+	__be64 extended_modes;		/* Extended modes */
+	__be32 vtraps[8];		/* Virtual trap addresses */
+	u8 reserved[4];			/* Reserved, for future expansion */
+	struct qe_microcode {
+		u8 id[32];      	/* Null-terminated identifier */
+		__be32 traps[16];       /* Trap addresses, 0 == ignore */
+		__be32 eccr;    	/* The value for the ECCR register */
+		__be32 iram_offset;     /* Offset into I-RAM for the code */
+		__be32 count;   	/* Number of 32-bit words of the code */
+		__be32 code_offset;     /* Offset of the actual microcode */
+		u8 major;       	/* The microcode version major */
+		u8 minor;       	/* The microcode version minor */
+		u8 revision;		/* The microcode version revision */
+		u8 padding;		/* Reserved, for alignment */
+		u8 reserved[4];		/* Reserved, for future expansion */
+	} __packed microcode[];
+	/* All microcode binaries should be located here */
+	/* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+	char id[64];		/* Firmware name */
+	u32 vtraps[8];		/* Virtual trap addresses */
+	u64 extended_modes;	/* Extended modes */
+};
+
+#ifdef CONFIG_QUICC_ENGINE
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+	__be16 status;
+	__be16 length;
+	__be32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK	0xffff0000
+#define BD_LENGTH_MASK	0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN	16	/* ??? */
+#define QE_ALIGNMENT_OF_BD	8
+#define QE_ALIGNMENT_OF_PRAM	64
+
+/* RISC allocation */
+#define QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
+						 QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
+					 QE_RISC_ALLOCATION_RISC2 | \
+					 QE_RISC_ALLOCATION_RISC3 | \
+					 QE_RISC_ALLOCATION_RISC4)
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 8 bytes */
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+		= 0x0,/* not used */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+	u16 tm_base;		/* QE timer table base adr */
+	u16 tm_ptr;		/* QE timer table pointer */
+	u16 r_tmr;		/* QE timer mode register */
+	u16 r_tmv;		/* QE timer valid register */
+	u32 tm_cmd;		/* QE timer cmd register */
+	u32 tm_cnt;		/* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE	8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+	u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+	COMM_DIR_NONE = 0,
+	COMM_DIR_RX = 1,
+	COMM_DIR_TX = 2,
+	COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG		0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXUCR_GRANT			0x00008000
+#define QE_CMXUCR_TSA			0x00004000
+#define QE_CMXUCR_BKPT			0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG		0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXGCR_USBCS			0x0000000f
+#define QE_CMXGCR_USBCS_CLK3		0x1
+#define QE_CMXGCR_USBCS_CLK5		0x2
+#define QE_CMXGCR_USBCS_CLK7		0x3
+#define QE_CMXGCR_USBCS_CLK9		0x4
+#define QE_CMXGCR_USBCS_CLK13		0x5
+#define QE_CMXGCR_USBCS_CLK17		0x6
+#define QE_CMXGCR_USBCS_CLK19		0x7
+#define QE_CMXGCR_USBCS_CLK21		0x8
+#define QE_CMXGCR_USBCS_BRG9		0x9
+#define QE_CMXGCR_USBCS_BRG10		0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG			0x00010000
+#define QE_RESET			0x80000000
+#define QE_INIT_TX_RX			0x00000000
+#define QE_INIT_RX			0x00000001
+#define QE_INIT_TX			0x00000002
+#define QE_ENTER_HUNT_MODE		0x00000003
+#define QE_STOP_TX			0x00000004
+#define QE_GRACEFUL_STOP_TX		0x00000005
+#define QE_RESTART_TX			0x00000006
+#define QE_CLOSE_RX_BD			0x00000007
+#define QE_SWITCH_COMMAND		0x00000007
+#define QE_SET_GROUP_ADDRESS		0x00000008
+#define QE_START_IDMA			0x00000009
+#define QE_MCC_STOP_RX			0x00000009
+#define QE_ATM_TRANSMIT			0x0000000a
+#define QE_HPAC_CLEAR_ALL		0x0000000b
+#define QE_GRACEFUL_STOP_RX		0x0000001a
+#define QE_RESTART_RX			0x0000001b
+#define QE_HPAC_SET_PRIORITY		0x0000010b
+#define QE_HPAC_STOP_TX			0x0000020b
+#define QE_HPAC_STOP_RX			0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
+#define QE_HPAC_START_TX		0x0000060b
+#define QE_HPAC_START_RX		0x0000070b
+#define QE_USB_STOP_TX			0x0000000a
+#define QE_USB_RESTART_TX		0x0000000c
+#define QE_QMC_STOP_TX			0x0000000c
+#define QE_QMC_STOP_RX			0x0000000d
+#define QE_SS7_SU_FIL_RESET		0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS			0x0000000a
+#define QE_MCC_INIT_TX_RX_16		0x00000003
+#define QE_MCC_STOP_TX			0x00000004
+#define QE_MCC_INIT_TX_1		0x00000005
+#define QE_MCC_INIT_RX_1		0x00000006
+#define QE_MCC_RESET			0x00000007
+#define QE_SET_TIMER			0x00000008
+#define QE_RANDOM_NUMBER		0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT	0x00000011
+#define QE_ASSIGN_PAGE			0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
+#define QE_START_FLOW_CONTROL		0x00000014
+#define QE_STOP_FLOW_CONTROL		0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
+
+#define QE_ASSIGN_RISC			0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT		6
+#define QE_CR_MCN_USB_SHIFT		4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
+#define QE_CR_SNUM_SHIFT		17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID		0x00000000
+#define QE_CR_SUBBLOCK_USB		0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
+#define QE_CR_SUBBLOCK_MCC1		0x03800000
+#define QE_CR_SUBBLOCK_MCC2		0x03a00000
+#define QE_CR_SUBBLOCK_MCC3		0x03000000
+#define QE_CR_SUBBLOCK_IDMA1		0x02800000
+#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
+#define QE_CR_SUBBLOCK_HPAC		0x01e00000
+#define QE_CR_SUBBLOCK_SPI1		0x01400000
+#define QE_CR_SUBBLOCK_SPI2		0x01600000
+#define QE_CR_SUBBLOCK_RAND		0x01c00000
+#define QE_CR_SUBBLOCK_TIMER		0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
+#define QE_CR_PROTOCOL_QMC		0x02
+#define QE_CR_PROTOCOL_UART		0x04
+#define QE_CR_PROTOCOL_ATM_POS		0x0A
+#define QE_CR_PROTOCOL_ETHERNET		0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE		0x00010000
+#define QE_BRGC_DIVISOR_SHIFT	1
+#define QE_BRGC_DIVISOR_MAX	0xFFF
+#define QE_BRGC_DIV16		1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS	0x80
+#define QE_GTCFR1_STP2	0x20
+#define QE_GTCFR1_RST2	0x10
+#define QE_GTCFR1_GM2	0x08
+#define QE_GTCFR1_GM1	0x04
+#define QE_GTCFR1_STP1	0x02
+#define QE_GTCFR1_RST1	0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1	0x02000000
+#define QE_SDSR_BER2	0x01000000
+
+#define QE_SDMR_GLB_1_MSK	0x80000000
+#define QE_SDMR_ADR_SEL		0x20000000
+#define QE_SDMR_BER1_MSK	0x02000000
+#define QE_SDMR_BER2_MSK	0x01000000
+#define QE_SDMR_EB1_MSK		0x00800000
+#define QE_SDMR_ER1_MSK		0x00080000
+#define QE_SDMR_ER2_MSK		0x00040000
+#define QE_SDMR_CEN_MASK	0x0000E000
+#define QE_SDMR_SBER_1		0x00000200
+#define QE_SDMR_SBER_2		0x00000200
+#define QE_SDMR_EB1_PR_MASK	0x000000C0
+#define QE_SDMR_ER1_PR		0x00000008
+
+#define QE_SDMR_CEN_SHIFT	13
+#define QE_SDMR_EB1_PR_SHIFT	6
+
+#define QE_SDTM_MSNUM_SHIFT	24
+
+#define QE_SDEBCR_BA_MASK	0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
+#define QE_IRAM_READY           0x80000000      /* Ready */
+
+/* UPC */
+#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX	0x02
+#define UCC_GUEMR_MODE_FAST_RX	0x02
+#define UCC_GUEMR_MODE_SLOW_RX	0x00
+#define UCC_GUEMR_MODE_MASK_TX	0x01
+#define UCC_GUEMR_MODE_FAST_TX	0x01
+#define UCC_GUEMR_MODE_SLOW_TX	0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
+					   must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+	__be16 rbase;		/* RX BD base address */
+	__be16 tbase;		/* TX BD base address */
+	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
+	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
+	__be16 mrblr;		/* Rx buffer length */
+	__be32 rstate;		/* Rx internal state */
+	__be32 rptr;		/* Rx internal data pointer */
+	__be16 rbptr;		/* rb BD Pointer */
+	__be16 rcount;		/* Rx internal byte count */
+	__be32 rtemp;		/* Rx temp */
+	__be32 tstate;		/* Tx internal state */
+	__be32 tptr;		/* Tx internal data pointer */
+	__be16 tbptr;		/* Tx BD pointer */
+	__be16 tcount;		/* Tx byte count */
+	__be32 ttemp;		/* Tx temp */
+	__be32 rcrc;		/* temp receive CRC */
+	__be32 tcrc;		/* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
+#define UCC_SLOW_GUMR_H_REVD		0x00002000
+#define UCC_SLOW_GUMR_H_TRX		0x00001000
+#define UCC_SLOW_GUMR_H_TTX		0x00000800
+#define UCC_SLOW_GUMR_H_CDP		0x00000400
+#define UCC_SLOW_GUMR_H_CTSP		0x00000200
+#define UCC_SLOW_GUMR_H_CDS		0x00000100
+#define UCC_SLOW_GUMR_H_CTSS		0x00000080
+#define UCC_SLOW_GUMR_H_TFL		0x00000040
+#define UCC_SLOW_GUMR_H_RFW		0x00000020
+#define UCC_SLOW_GUMR_H_TXSY		0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM		0x00000002
+#define UCC_SLOW_GUMR_H_RSYN		0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI		0x10000000
+#define UCC_SLOW_GUMR_L_RINV		0x02000000
+#define UCC_SLOW_GUMR_L_TINV		0x01000000
+#define UCC_SLOW_GUMR_L_TEND		0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
+#define UCC_SLOW_GUMR_L_ENR		0x00000020
+#define UCC_SLOW_GUMR_L_ENT		0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_LOOPBACK	0x40000000
+#define UCC_FAST_GUMR_TCI	0x20000000
+#define UCC_FAST_GUMR_TRX	0x10000000
+#define UCC_FAST_GUMR_TTX	0x08000000
+#define UCC_FAST_GUMR_CDP	0x04000000
+#define UCC_FAST_GUMR_CTSP	0x02000000
+#define UCC_FAST_GUMR_CDS	0x01000000
+#define UCC_FAST_GUMR_CTSS	0x00800000
+#define UCC_FAST_GUMR_TXSY	0x00020000
+#define UCC_FAST_GUMR_RSYN	0x00010000
+#define UCC_FAST_GUMR_SYNL_MASK	0x0000C000
+#define UCC_FAST_GUMR_SYNL_16	0x0000C000
+#define UCC_FAST_GUMR_SYNL_8	0x00008000
+#define UCC_FAST_GUMR_SYNL_AUTO	0x00004000
+#define UCC_FAST_GUMR_RTSM	0x00002000
+#define UCC_FAST_GUMR_REVD	0x00000400
+#define UCC_FAST_GUMR_ENR	0x00000020
+#define UCC_FAST_GUMR_ENT	0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB	0x0200
+#define UCC_UART_UCCE_IDLE	0x0100
+#define UCC_UART_UCCE_GRA	0x0080
+#define UCC_UART_UCCE_BRKE	0x0040
+#define UCC_UART_UCCE_BRKS	0x0020
+#define UCC_UART_UCCE_CCR	0x0008
+#define UCC_UART_UCCE_BSY	0x0004
+#define UCC_UART_UCCE_TX	0x0002
+#define UCC_UART_UCCE_RX	0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR	0x1000
+#define UCC_HDLC_UCCE_GLT	0x0800
+#define UCC_HDLC_UCCE_IDLE	0x0100
+#define UCC_HDLC_UCCE_BRKE	0x0040
+#define UCC_HDLC_UCCE_BRKS	0x0020
+#define UCC_HDLC_UCCE_TXE	0x0010
+#define UCC_HDLC_UCCE_RXF	0x0008
+#define UCC_HDLC_UCCE_BSY	0x0004
+#define UCC_HDLC_UCCE_TXB	0x0002
+#define UCC_HDLC_UCCE_RXB	0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA	0x0080
+#define UCC_BISYNC_UCCE_TXE	0x0010
+#define UCC_BISYNC_UCCE_RCH	0x0008
+#define UCC_BISYNC_UCCE_BSY	0x0004
+#define UCC_BISYNC_UCCE_TXB	0x0002
+#define UCC_BISYNC_UCCE_RXB	0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
+#define UCC_UART_UPSMR_FLC		0x8000
+#define UCC_UART_UPSMR_SL		0x4000
+#define UCC_UART_UPSMR_CL_MASK		0x3000
+#define UCC_UART_UPSMR_CL_8		0x3000
+#define UCC_UART_UPSMR_CL_7		0x2000
+#define UCC_UART_UPSMR_CL_6		0x1000
+#define UCC_UART_UPSMR_CL_5		0x0000
+#define UCC_UART_UPSMR_UM_MASK		0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL	0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
+#define UCC_UART_UPSMR_FRZ		0x0200
+#define UCC_UART_UPSMR_RZS		0x0100
+#define UCC_UART_UPSMR_SYN		0x0080
+#define UCC_UART_UPSMR_DRT		0x0040
+#define UCC_UART_UPSMR_PEN		0x0010
+#define UCC_UART_UPSMR_RPM_MASK		0x000c
+#define UCC_UART_UPSMR_RPM_ODD		0x0000
+#define UCC_UART_UPSMR_RPM_LOW		0x0004
+#define UCC_UART_UPSMR_RPM_EVEN		0x0008
+#define UCC_UART_UPSMR_RPM_HIGH		0x000C
+#define UCC_UART_UPSMR_TPM_MASK		0x0003
+#define UCC_UART_UPSMR_TPM_ODD		0x0000
+#define UCC_UART_UPSMR_TPM_LOW		0x0001
+#define UCC_UART_UPSMR_TPM_EVEN		0x0002
+#define UCC_UART_UPSMR_TPM_HIGH		0x0003
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE     0x80000000
+#define UCC_GETH_UPSMR_PTPE     0x40000000
+#define UCC_GETH_UPSMR_ECM      0x04000000
+#define UCC_GETH_UPSMR_HSE      0x02000000
+#define UCC_GETH_UPSMR_PRO      0x00400000
+#define UCC_GETH_UPSMR_CAP      0x00200000
+#define UCC_GETH_UPSMR_RSH      0x00100000
+#define UCC_GETH_UPSMR_RPM      0x00080000
+#define UCC_GETH_UPSMR_R10M     0x00040000
+#define UCC_GETH_UPSMR_RLPB     0x00020000
+#define UCC_GETH_UPSMR_TBIM     0x00010000
+#define UCC_GETH_UPSMR_RES1     0x00002000
+#define UCC_GETH_UPSMR_RMM      0x00001000
+#define UCC_GETH_UPSMR_CAM      0x00000400
+#define UCC_GETH_UPSMR_BRO      0x00000200
+#define UCC_GETH_UPSMR_SMM	0x00000080
+#define UCC_GETH_UPSMR_SGMM	0x00000020
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for HDLC */
+#define UCC_HDLC_UPSMR_RTE	0x02000000
+#define UCC_HDLC_UPSMR_BUS	0x00200000
+#define UCC_HDLC_UPSMR_CW8	0x00007000
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD	0x8000
+#define UCC_FAST_TOD	0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL		0x20
+#define UCC_BMR_BO_BE		0x10
+#define UCC_BMR_CETM		0x04
+#define UCC_BMR_DTB		0x02
+#define UCC_BMR_BDB		0x01
+
+/* Function code masks */
+#define FC_GBL				0x20
+#define FC_DTB_LCL			0x02
+#define UCC_FAST_FUNCTION_CODE_GBL	0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/soc/fsl/qe/qe_tdm.h b/include/soc/fsl/qe/qe_tdm.h
new file mode 100644
index 000000000..43ea830cf
--- /dev/null
+++ b/include/soc/fsl/qe/qe_tdm.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Internal header file for QE TDM mode routines.
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors:	Zhao Qiang <qiang.zhao@nxp.com>
+ */
+
+#ifndef _QE_TDM_H_
+#define _QE_TDM_H_
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
+
+struct device_node;
+
+/* SI RAM entries */
+#define SIR_LAST	0x0001
+#define SIR_BYTE	0x0002
+#define SIR_CNT(x)	((x) << 2)
+#define SIR_CSEL(x)	((x) << 5)
+#define SIR_SGS		0x0200
+#define SIR_SWTR	0x4000
+#define SIR_MCC		0x8000
+#define SIR_IDLE	0
+
+/* SIxMR fields */
+#define SIMR_SAD(x) ((x) << 12)
+#define SIMR_SDM_NORMAL	0x0000
+#define SIMR_SDM_INTERNAL_LOOPBACK	0x0800
+#define SIMR_SDM_MASK	0x0c00
+#define SIMR_CRT	0x0040
+#define SIMR_SL		0x0020
+#define SIMR_CE		0x0010
+#define SIMR_FE		0x0008
+#define SIMR_GM		0x0004
+#define SIMR_TFSD(n)	(n)
+#define SIMR_RFSD(n)	((n) << 8)
+
+enum tdm_ts_t {
+	TDM_TX_TS,
+	TDM_RX_TS
+};
+
+enum tdm_framer_t {
+	TDM_FRAMER_T1,
+	TDM_FRAMER_E1
+};
+
+enum tdm_mode_t {
+	TDM_INTERNAL_LOOPBACK,
+	TDM_NORMAL
+};
+
+struct si_mode_info {
+	u8 simr_rfsd;
+	u8 simr_tfsd;
+	u8 simr_crt;
+	u8 simr_sl;
+	u8 simr_ce;
+	u8 simr_fe;
+	u8 simr_gm;
+};
+
+struct ucc_tdm_info {
+	struct ucc_fast_info uf_info;
+	struct si_mode_info si_info;
+};
+
+struct ucc_tdm {
+	u16 tdm_port;		/* port for this tdm:TDMA,TDMB */
+	u32 siram_entry_id;
+	u16 __iomem *siram;
+	struct si1 __iomem *si_regs;
+	enum tdm_framer_t tdm_framer_type;
+	enum tdm_mode_t tdm_mode;
+	u8 num_of_ts;		/* the number of timeslots in this tdm frame */
+	u32 tx_ts_mask;		/* tx time slot mask */
+	u32 rx_ts_mask;		/* rx time slot mask */
+};
+
+int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm,
+		     struct ucc_tdm_info *ut_info);
+void ucc_tdm_init(struct ucc_tdm *utdm, struct ucc_tdm_info *ut_info);
+#endif
diff --git a/include/soc/fsl/qe/ucc.h b/include/soc/fsl/qe/ucc.h
new file mode 100644
index 000000000..09e71557a
--- /dev/null
+++ b/include/soc/fsl/qe/ucc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM	8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * speed   - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode);
+int ucc_set_tdm_rxtx_clk(unsigned int tdm_num, enum qe_clock clock,
+			 enum comm_dir mode);
+int ucc_set_tdm_rxtx_sync(unsigned int tdm_num, enum qe_clock clock,
+			  enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif				/* __UCC_H__ */
diff --git a/include/soc/fsl/qe/ucc_fast.h b/include/soc/fsl/qe/ucc_fast.h
new file mode 100644
index 000000000..ad60b87a3
--- /dev/null
+++ b/include/soc/fsl/qe/ucc_fast.h
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/types.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+
+/* Receive BD's status and length*/
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_F	0x04000000	/* first */
+
+/* transmit BD's status and length*/
+#define T_R	0x80000000	/* ready bit */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+/* Receive BD's status */
+#define R_E_S	0x8000	/* buffer empty */
+#define R_W_S	0x2000	/* wrap bit */
+#define R_I_S	0x1000	/* interrupt on reception */
+#define R_L_S	0x0800	/* last */
+#define R_F_S	0x0400	/* first */
+#define R_CM_S	0x0200	/* continuous mode */
+#define R_LG_S  0x0020  /* frame length */
+#define R_NO_S  0x0010  /* nonoctet */
+#define R_AB_S  0x0008  /* abort */
+#define R_CR_S	0x0004	/* crc */
+#define R_OV_S	0x0002	/* overrun */
+#define R_CD_S  0x0001  /* carrier detect */
+
+/* transmit BD's status */
+#define T_R_S	0x8000	/* ready bit */
+#define T_W_S	0x2000	/* wrap bit */
+#define T_I_S	0x1000	/* interrupt on completion */
+#define T_L_S	0x0800	/* last */
+#define T_TC_S	0x0400	/* crc */
+#define T_TM_S	0x0200	/* continuous mode */
+#define T_UN_S  0x0002  /* hdlc underrun */
+#define T_CT_S  0x0001  /* hdlc carrier lost */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN			4
+#define UCC_FAST_MRBLR_ALIGNMENT		4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL				0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+	UCC_FAST_16_BIT_CRC = 0x00000000,
+	UCC_FAST_CRC_RESERVED0 = 0x00000040,
+	UCC_FAST_32_BIT_CRC = 0x00000080,
+	UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+	int ucc_num;
+	int tdm_num;
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	enum qe_clock rx_sync;
+	enum qe_clock tx_sync;
+	resource_size_t regs;
+	int irq;
+	u32 uccm_mask;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int tci;
+	int txsy;
+	int rtsm;
+	int revd;
+	int rsyn;
+	u16 max_rx_buf_length;
+	u16 urfs;
+	u16 urfet;
+	u16 urfset;
+	u16 utfs;
+	u16 utfet;
+	u16 utftt;
+	u16 ufpt;
+	enum ucc_fast_channel_protocol_mode mode;
+	enum ucc_fast_transparent_txrx ttx_trx;
+	enum ucc_fast_tx_encoding_method tenc;
+	enum ucc_fast_rx_decoding_method renc;
+	enum ucc_fast_transparent_tcrc tcrc;
+	enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+	struct ucc_fast_info *uf_info;
+	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+	__be32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
+	__be32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	__be16 __iomem *p_utodr;/* pointer to the transmit on demand register */
+#endif
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	s32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+						    virtual fifo */
+	s32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+						    virtual fifo */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counter. */
+	u32 rx_frames;		/* Received frames counter (only frames
+				   passed to application). */
+	u32 tx_discarded;	/* Discarded tx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+	u32 rx_discarded;	/* Discarded rx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+#endif				/* STATISTICS */
+	u16 mrblr;		/* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info  - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif				/* __UCC_FAST_H__ */
diff --git a/include/soc/fsl/qe/ucc_slow.h b/include/soc/fsl/qe/ucc_slow.h
new file mode 100644
index 000000000..7548ce8a2
--- /dev/null
+++ b/include/soc/fsl/qe/ucc_slow.h
@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/types.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_PAD	0x40000000	/* add pads to short frames */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+#define T_A	0x04000000	/* Address - the data transmitted as address
+				   chars */
+#define T_TC	0x04000000	/* transmit CRC */
+#define T_CM	0x02000000	/* continuous mode */
+#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
+#define T_P	0x01000000	/* Preamble - send Preamble sequence before
+				   data */
+#define T_HB	0x01000000	/* heartbeat */
+#define T_NS	0x00800000	/* No Stop */
+#define T_LC	0x00800000	/* late collision */
+#define T_RL	0x00400000	/* retransmission limit */
+#define T_UN	0x00020000	/* underrun */
+#define T_CT	0x00010000	/* CTS lost */
+#define T_CSL	0x00010000	/* carrier sense lost */
+#define T_RC	0x003c0000	/* retry count */
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_C	0x08000000	/* the last byte in this buffer is a cntl
+				   char */
+#define R_F	0x04000000	/* first */
+#define R_A	0x04000000	/* the first byte in this buffer is address
+				   byte */
+#define R_CM	0x02000000	/* continuous mode */
+#define R_ID	0x01000000	/* buffer close on reception of idles */
+#define R_M	0x01000000	/* Frame received because of promiscuous
+				   mode */
+#define R_AM	0x00800000	/* Address match */
+#define R_DE	0x00800000	/* Address match */
+#define R_LG	0x00200000	/* Break received */
+#define R_BR	0x00200000	/* Frame length violation */
+#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
+#define R_FR	0x00100000	/* Framing Error (no stop bit) character
+				   received */
+#define R_PR	0x00080000	/* Parity Error character received */
+#define R_AB	0x00080000	/* Frame Aborted */
+#define R_SH	0x00080000	/* frame is too short */
+#define R_CR	0x00040000	/* CRC Error */
+#define R_OV	0x00020000	/* Overrun */
+#define R_CD	0x00010000	/* CD lost */
+#define R_CL	0x00010000	/* this frame is closed because of a
+				   collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN		4
+#define UCC_SLOW_MRBLR_ALIGNMENT	4
+#define UCC_SLOW_PRAM_SIZE		0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+	/* 32-bit CCITT CRC (Ethernet and HDLC) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+	int ucc_num;
+	int protocol;			/* QE_CR_PROTOCOL_xxx */
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	phys_addr_t regs;
+	int irq;
+	u16 uccm_mask;
+	int data_mem_part;
+	int init_tx;
+	int init_rx;
+	u32 tx_bd_ring_len;
+	u32 rx_bd_ring_len;
+	int rx_interrupts;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int rinv;
+	int tinv;
+	int rtsm;
+	int rfw;
+	int tci;
+	int tend;
+	int tfl;
+	int txsy;
+	u16 max_rx_buf_length;
+	enum ucc_slow_transparent_tcrc tcrc;
+	enum ucc_slow_channel_protocol_mode mode;
+	enum ucc_slow_diag_mode diag;
+	enum ucc_slow_tx_oversampling_rate tdcr;
+	enum ucc_slow_rx_oversampling_rate rdcr;
+	enum ucc_slow_tx_encoding_method tenc;
+	enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+	struct ucc_slow_info *us_info;
+	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
+	struct ucc_slow_pram __iomem *us_pram;	/* a pointer to the parameter RAM */
+	s32 us_pram_offset;
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	struct list_head confQ;	/* frames passed to chip waiting for tx */
+	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
+				   and length for first BD in a frame */
+	s32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
+	s32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
+	struct qe_bd __iomem *confBd;	/* next BD for confirm after Tx */
+	struct qe_bd __iomem *tx_bd;	/* next BD for new Tx request */
+	struct qe_bd __iomem *rx_bd;	/* next BD to collect after Rx */
+	void *p_rx_frame;	/* accumulating receive frame */
+	__be16 __iomem *p_ucce;	/* a pointer to the event register in memory */
+	__be16 __iomem *p_uccm;	/* a pointer to the mask register in memory */
+	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counters */
+	u32 rx_frames;		/* Received frames counters (only frames
+				   passed to application) */
+	u32 rx_discarded;	/* Discarded frames counters (frames that
+				   were discarded by the driver due to
+				   errors) */
+#endif				/* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info  - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_tx
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif				/* __UCC_SLOW_H__ */
diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
new file mode 100644
index 000000000..0d3d6beb7
--- /dev/null
+++ b/include/soc/fsl/qman.h
@@ -0,0 +1,1259 @@
+/* Copyright 2008 - 2016 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_QMAN_H
+#define __FSL_QMAN_H
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+
+/* Hardware constants */
+#define QM_CHANNEL_SWPORTAL0 0
+#define QMAN_CHANNEL_POOL1 0x21
+#define QMAN_CHANNEL_CAAM 0x80
+#define QMAN_CHANNEL_POOL1_REV3 0x401
+#define QMAN_CHANNEL_CAAM_REV3 0x840
+extern u16 qm_channel_pool1;
+extern u16 qm_channel_caam;
+
+/* Portal processing (interrupt) sources */
+#define QM_PIRQ_CSCI	0x00100000	/* Congestion State Change */
+#define QM_PIRQ_EQCI	0x00080000	/* Enqueue Command Committed */
+#define QM_PIRQ_EQRI	0x00040000	/* EQCR Ring (below threshold) */
+#define QM_PIRQ_DQRI	0x00020000	/* DQRR Ring (non-empty) */
+#define QM_PIRQ_MRI	0x00010000	/* MR Ring (non-empty) */
+/*
+ * This mask contains all the interrupt sources that need handling except DQRI,
+ * ie. that if present should trigger slow-path processing.
+ */
+#define QM_PIRQ_SLOW	(QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \
+			 QM_PIRQ_MRI)
+
+/* For qman_static_dequeue_*** APIs */
+#define QM_SDQCR_CHANNELS_POOL_MASK	0x00007fff
+/* for n in [1,15] */
+#define QM_SDQCR_CHANNELS_POOL(n)	(0x00008000 >> (n))
+/* for conversion from n of qm_channel */
+static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel)
+{
+	return QM_SDQCR_CHANNELS_POOL(channel + 1 - qm_channel_pool1);
+}
+
+/* --- QMan data structures (and associated constants) --- */
+
+/* "Frame Descriptor (FD)" */
+struct qm_fd {
+	union {
+		struct {
+			u8 cfg8b_w1;
+			u8 bpid;	/* Buffer Pool ID */
+			u8 cfg8b_w3;
+			u8 addr_hi;	/* high 8-bits of 40-bit address */
+			__be32 addr_lo;	/* low 32-bits of 40-bit address */
+		} __packed;
+		__be64 data;
+	};
+	__be32 cfg;	/* format, offset, length / congestion */
+	union {
+		__be32 cmd;
+		__be32 status;
+	};
+} __aligned(8);
+
+#define QM_FD_FORMAT_SG		BIT(31)
+#define QM_FD_FORMAT_LONG	BIT(30)
+#define QM_FD_FORMAT_COMPOUND	BIT(29)
+#define QM_FD_FORMAT_MASK	GENMASK(31, 29)
+#define QM_FD_OFF_SHIFT		20
+#define QM_FD_OFF_MASK		GENMASK(28, 20)
+#define QM_FD_LEN_MASK		GENMASK(19, 0)
+#define QM_FD_LEN_BIG_MASK	GENMASK(28, 0)
+
+enum qm_fd_format {
+	/*
+	 * 'contig' implies a contiguous buffer, whereas 'sg' implies a
+	 * scatter-gather table. 'big' implies a 29-bit length with no offset
+	 * field, otherwise length is 20-bit and offset is 9-bit. 'compound'
+	 * implies a s/g-like table, where each entry itself represents a frame
+	 * (contiguous or scatter-gather) and the 29-bit "length" is
+	 * interpreted purely for congestion calculations, ie. a "congestion
+	 * weight".
+	 */
+	qm_fd_contig = 0,
+	qm_fd_contig_big = QM_FD_FORMAT_LONG,
+	qm_fd_sg = QM_FD_FORMAT_SG,
+	qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG,
+	qm_fd_compound = QM_FD_FORMAT_COMPOUND
+};
+
+static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd)
+{
+	return be64_to_cpu(fd->data) & 0xffffffffffLLU;
+}
+
+static inline u64 qm_fd_addr_get64(const struct qm_fd *fd)
+{
+	return be64_to_cpu(fd->data) & 0xffffffffffLLU;
+}
+
+static inline void qm_fd_addr_set64(struct qm_fd *fd, u64 addr)
+{
+	fd->addr_hi = upper_32_bits(addr);
+	fd->addr_lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+/*
+ * The 'format' field indicates the interpretation of the remaining
+ * 29 bits of the 32-bit word.
+ * If 'format' is _contig or _sg, 20b length and 9b offset.
+ * If 'format' is _contig_big or _sg_big, 29b length.
+ * If 'format' is _compound, 29b "congestion weight".
+ */
+static inline enum qm_fd_format qm_fd_get_format(const struct qm_fd *fd)
+{
+	return be32_to_cpu(fd->cfg) & QM_FD_FORMAT_MASK;
+}
+
+static inline int qm_fd_get_offset(const struct qm_fd *fd)
+{
+	return (be32_to_cpu(fd->cfg) & QM_FD_OFF_MASK) >> QM_FD_OFF_SHIFT;
+}
+
+static inline int qm_fd_get_length(const struct qm_fd *fd)
+{
+	return be32_to_cpu(fd->cfg) & QM_FD_LEN_MASK;
+}
+
+static inline int qm_fd_get_len_big(const struct qm_fd *fd)
+{
+	return be32_to_cpu(fd->cfg) & QM_FD_LEN_BIG_MASK;
+}
+
+static inline void qm_fd_set_param(struct qm_fd *fd, enum qm_fd_format fmt,
+				   int off, int len)
+{
+	fd->cfg = cpu_to_be32(fmt | (len & QM_FD_LEN_BIG_MASK) |
+			      ((off << QM_FD_OFF_SHIFT) & QM_FD_OFF_MASK));
+}
+
+#define qm_fd_set_contig(fd, off, len) \
+	qm_fd_set_param(fd, qm_fd_contig, off, len)
+#define qm_fd_set_sg(fd, off, len) qm_fd_set_param(fd, qm_fd_sg, off, len)
+#define qm_fd_set_contig_big(fd, len) \
+	qm_fd_set_param(fd, qm_fd_contig_big, 0, len)
+#define qm_fd_set_sg_big(fd, len) qm_fd_set_param(fd, qm_fd_sg_big, 0, len)
+#define qm_fd_set_compound(fd, len) qm_fd_set_param(fd, qm_fd_compound, 0, len)
+
+static inline void qm_fd_clear_fd(struct qm_fd *fd)
+{
+	fd->data = 0;
+	fd->cfg = 0;
+	fd->cmd = 0;
+}
+
+/* Scatter/Gather table entry */
+struct qm_sg_entry {
+	union {
+		struct {
+			u8 __reserved1[3];
+			u8 addr_hi;	/* high 8-bits of 40-bit address */
+			__be32 addr_lo;	/* low 32-bits of 40-bit address */
+		};
+		__be64 data;
+	};
+	__be32 cfg;	/* E bit, F bit, length */
+	u8 __reserved2;
+	u8 bpid;
+	__be16 offset; /* 13-bit, _res[13-15]*/
+} __packed;
+
+#define QM_SG_LEN_MASK	GENMASK(29, 0)
+#define QM_SG_OFF_MASK	GENMASK(12, 0)
+#define QM_SG_FIN	BIT(30)
+#define QM_SG_EXT	BIT(31)
+
+static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg)
+{
+	return be64_to_cpu(sg->data) & 0xffffffffffLLU;
+}
+
+static inline u64 qm_sg_entry_get64(const struct qm_sg_entry *sg)
+{
+	return be64_to_cpu(sg->data) & 0xffffffffffLLU;
+}
+
+static inline void qm_sg_entry_set64(struct qm_sg_entry *sg, u64 addr)
+{
+	sg->addr_hi = upper_32_bits(addr);
+	sg->addr_lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+static inline bool qm_sg_entry_is_final(const struct qm_sg_entry *sg)
+{
+	return be32_to_cpu(sg->cfg) & QM_SG_FIN;
+}
+
+static inline bool qm_sg_entry_is_ext(const struct qm_sg_entry *sg)
+{
+	return be32_to_cpu(sg->cfg) & QM_SG_EXT;
+}
+
+static inline int qm_sg_entry_get_len(const struct qm_sg_entry *sg)
+{
+	return be32_to_cpu(sg->cfg) & QM_SG_LEN_MASK;
+}
+
+static inline void qm_sg_entry_set_len(struct qm_sg_entry *sg, int len)
+{
+	sg->cfg = cpu_to_be32(len & QM_SG_LEN_MASK);
+}
+
+static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len)
+{
+	sg->cfg = cpu_to_be32(QM_SG_FIN | (len & QM_SG_LEN_MASK));
+}
+
+static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg)
+{
+	return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK;
+}
+
+/* "Frame Dequeue Response" */
+struct qm_dqrr_entry {
+	u8 verb;
+	u8 stat;
+	__be16 seqnum;	/* 15-bit */
+	u8 tok;
+	u8 __reserved2[3];
+	__be32 fqid;	/* 24-bit */
+	__be32 context_b;
+	struct qm_fd fd;
+	u8 __reserved4[32];
+} __packed __aligned(64);
+#define QM_DQRR_VERB_VBIT		0x80
+#define QM_DQRR_VERB_MASK		0x7f	/* where the verb contains; */
+#define QM_DQRR_VERB_FRAME_DEQUEUE	0x60	/* "this format" */
+#define QM_DQRR_STAT_FQ_EMPTY		0x80	/* FQ empty */
+#define QM_DQRR_STAT_FQ_HELDACTIVE	0x40	/* FQ held active */
+#define QM_DQRR_STAT_FQ_FORCEELIGIBLE	0x20	/* FQ was force-eligible'd */
+#define QM_DQRR_STAT_FD_VALID		0x10	/* has a non-NULL FD */
+#define QM_DQRR_STAT_UNSCHEDULED	0x02	/* Unscheduled dequeue */
+#define QM_DQRR_STAT_DQCR_EXPIRED	0x01	/* VDQCR or PDQCR expired*/
+
+/* 'fqid' is a 24-bit field in every h/w descriptor */
+#define QM_FQID_MASK	GENMASK(23, 0)
+#define qm_fqid_set(p, v) ((p)->fqid = cpu_to_be32((v) & QM_FQID_MASK))
+#define qm_fqid_get(p)    (be32_to_cpu((p)->fqid) & QM_FQID_MASK)
+
+/* "ERN Message Response" */
+/* "FQ State Change Notification" */
+union qm_mr_entry {
+	struct {
+		u8 verb;
+		u8 __reserved[63];
+	};
+	struct {
+		u8 verb;
+		u8 dca;
+		__be16 seqnum;
+		u8 rc;		/* Rej Code: 8-bit */
+		u8 __reserved[3];
+		__be32 fqid;	/* 24-bit */
+		__be32 tag;
+		struct qm_fd fd;
+		u8 __reserved1[32];
+	} __packed __aligned(64) ern;
+	struct {
+		u8 verb;
+		u8 fqs;		/* Frame Queue Status */
+		u8 __reserved1[6];
+		__be32 fqid;	/* 24-bit */
+		__be32 context_b;
+		u8 __reserved2[48];
+	} __packed fq;		/* FQRN/FQRNI/FQRL/FQPN */
+};
+#define QM_MR_VERB_VBIT			0x80
+/*
+ * ERNs originating from direct-connect portals ("dcern") use 0x20 as a verb
+ * which would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished
+ * from the other MR types by noting if the 0x20 bit is unset.
+ */
+#define QM_MR_VERB_TYPE_MASK		0x27
+#define QM_MR_VERB_DC_ERN		0x20
+#define QM_MR_VERB_FQRN			0x21
+#define QM_MR_VERB_FQRNI		0x22
+#define QM_MR_VERB_FQRL			0x23
+#define QM_MR_VERB_FQPN			0x24
+#define QM_MR_RC_MASK			0xf0	/* contains one of; */
+#define QM_MR_RC_CGR_TAILDROP		0x00
+#define QM_MR_RC_WRED			0x10
+#define QM_MR_RC_ERROR			0x20
+#define QM_MR_RC_ORPWINDOW_EARLY	0x30
+#define QM_MR_RC_ORPWINDOW_LATE		0x40
+#define QM_MR_RC_FQ_TAILDROP		0x50
+#define QM_MR_RC_ORPWINDOW_RETIRED	0x60
+#define QM_MR_RC_ORP_ZERO		0x70
+#define QM_MR_FQS_ORLPRESENT		0x02	/* ORL fragments to come */
+#define QM_MR_FQS_NOTEMPTY		0x01	/* FQ has enqueued frames */
+
+/*
+ * An identical structure of FQD fields is present in the "Init FQ" command and
+ * the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type.
+ * Within that, the 'stashing' and 'taildrop' pieces are also factored out, the
+ * latter has two inlines to assist with converting to/from the mant+exp
+ * representation.
+ */
+struct qm_fqd_stashing {
+	/* See QM_STASHING_EXCL_<...> */
+	u8 exclusive;
+	/* Numbers of cachelines */
+	u8 cl; /* _res[6-7], as[4-5], ds[2-3], cs[0-1] */
+};
+
+struct qm_fqd_oac {
+	/* "Overhead Accounting Control", see QM_OAC_<...> */
+	u8 oac; /* oac[6-7], _res[0-5] */
+	/* Two's-complement value (-128 to +127) */
+	s8 oal; /* "Overhead Accounting Length" */
+};
+
+struct qm_fqd {
+	/* _res[6-7], orprws[3-5], oa[2], olws[0-1] */
+	u8 orpc;
+	u8 cgid;
+	__be16 fq_ctrl;	/* See QM_FQCTRL_<...> */
+	__be16 dest_wq;	/* channel[3-15], wq[0-2] */
+	__be16 ics_cred; /* 15-bit */
+	/*
+	 * For "Initialize Frame Queue" commands, the write-enable mask
+	 * determines whether 'td' or 'oac_init' is observed. For query
+	 * commands, this field is always 'td', and 'oac_query' (below) reflects
+	 * the Overhead ACcounting values.
+	 */
+	union {
+		__be16 td; /* "Taildrop": _res[13-15], mant[5-12], exp[0-4] */
+		struct qm_fqd_oac oac_init;
+	};
+	__be32 context_b;
+	union {
+		/* Treat it as 64-bit opaque */
+		__be64 opaque;
+		struct {
+			__be32 hi;
+			__be32 lo;
+		};
+		/* Treat it as s/w portal stashing config */
+		/* see "FQD Context_A field used for [...]" */
+		struct {
+			struct qm_fqd_stashing stashing;
+			/*
+			 * 48-bit address of FQ context to
+			 * stash, must be cacheline-aligned
+			 */
+			__be16 context_hi;
+			__be32 context_lo;
+		} __packed;
+	} context_a;
+	struct qm_fqd_oac oac_query;
+} __packed;
+
+#define QM_FQD_CHAN_OFF		3
+#define QM_FQD_WQ_MASK		GENMASK(2, 0)
+#define QM_FQD_TD_EXP_MASK	GENMASK(4, 0)
+#define QM_FQD_TD_MANT_OFF	5
+#define QM_FQD_TD_MANT_MASK	GENMASK(12, 5)
+#define QM_FQD_TD_MAX		0xe0000000
+#define QM_FQD_TD_MANT_MAX	0xff
+#define QM_FQD_OAC_OFF		6
+#define QM_FQD_AS_OFF		4
+#define QM_FQD_DS_OFF		2
+#define QM_FQD_XS_MASK		0x3
+
+/* 64-bit converters for context_hi/lo */
+static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd)
+{
+	return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL;
+}
+
+static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd)
+{
+	return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL;
+}
+
+static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd)
+{
+	return qm_fqd_stashing_get64(fqd);
+}
+
+static inline void qm_fqd_stashing_set64(struct qm_fqd *fqd, u64 addr)
+{
+	fqd->context_a.context_hi = cpu_to_be16(upper_32_bits(addr));
+	fqd->context_a.context_lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+static inline void qm_fqd_context_a_set64(struct qm_fqd *fqd, u64 addr)
+{
+	fqd->context_a.hi = cpu_to_be32(upper_32_bits(addr));
+	fqd->context_a.lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+/* convert a threshold value into mant+exp representation */
+static inline int qm_fqd_set_taildrop(struct qm_fqd *fqd, u32 val,
+				      int roundup)
+{
+	u32 e = 0;
+	int td, oddbit = 0;
+
+	if (val > QM_FQD_TD_MAX)
+		return -ERANGE;
+
+	while (val > QM_FQD_TD_MANT_MAX) {
+		oddbit = val & 1;
+		val >>= 1;
+		e++;
+		if (roundup && oddbit)
+			val++;
+	}
+
+	td = (val << QM_FQD_TD_MANT_OFF) & QM_FQD_TD_MANT_MASK;
+	td |= (e & QM_FQD_TD_EXP_MASK);
+	fqd->td = cpu_to_be16(td);
+	return 0;
+}
+/* and the other direction */
+static inline int qm_fqd_get_taildrop(const struct qm_fqd *fqd)
+{
+	int td = be16_to_cpu(fqd->td);
+
+	return ((td & QM_FQD_TD_MANT_MASK) >> QM_FQD_TD_MANT_OFF)
+		<< (td & QM_FQD_TD_EXP_MASK);
+}
+
+static inline void qm_fqd_set_stashing(struct qm_fqd *fqd, u8 as, u8 ds, u8 cs)
+{
+	struct qm_fqd_stashing *st = &fqd->context_a.stashing;
+
+	st->cl = ((as & QM_FQD_XS_MASK) << QM_FQD_AS_OFF) |
+		 ((ds & QM_FQD_XS_MASK) << QM_FQD_DS_OFF) |
+		 (cs & QM_FQD_XS_MASK);
+}
+
+static inline u8 qm_fqd_get_stashing(const struct qm_fqd *fqd)
+{
+	return fqd->context_a.stashing.cl;
+}
+
+static inline void qm_fqd_set_oac(struct qm_fqd *fqd, u8 val)
+{
+	fqd->oac_init.oac = val << QM_FQD_OAC_OFF;
+}
+
+static inline void qm_fqd_set_oal(struct qm_fqd *fqd, s8 val)
+{
+	fqd->oac_init.oal = val;
+}
+
+static inline void qm_fqd_set_destwq(struct qm_fqd *fqd, int ch, int wq)
+{
+	fqd->dest_wq = cpu_to_be16((ch << QM_FQD_CHAN_OFF) |
+				   (wq & QM_FQD_WQ_MASK));
+}
+
+static inline int qm_fqd_get_chan(const struct qm_fqd *fqd)
+{
+	return be16_to_cpu(fqd->dest_wq) >> QM_FQD_CHAN_OFF;
+}
+
+static inline int qm_fqd_get_wq(const struct qm_fqd *fqd)
+{
+	return be16_to_cpu(fqd->dest_wq) & QM_FQD_WQ_MASK;
+}
+
+/* See "Frame Queue Descriptor (FQD)" */
+/* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */
+#define QM_FQCTRL_MASK		0x07ff	/* 'fq_ctrl' flags; */
+#define QM_FQCTRL_CGE		0x0400	/* Congestion Group Enable */
+#define QM_FQCTRL_TDE		0x0200	/* Tail-Drop Enable */
+#define QM_FQCTRL_CTXASTASHING	0x0080	/* Context-A stashing */
+#define QM_FQCTRL_CPCSTASH	0x0040	/* CPC Stash Enable */
+#define QM_FQCTRL_FORCESFDR	0x0008	/* High-priority SFDRs */
+#define QM_FQCTRL_AVOIDBLOCK	0x0004	/* Don't block active */
+#define QM_FQCTRL_HOLDACTIVE	0x0002	/* Hold active in portal */
+#define QM_FQCTRL_PREFERINCACHE	0x0001	/* Aggressively cache FQD */
+#define QM_FQCTRL_LOCKINCACHE	QM_FQCTRL_PREFERINCACHE /* older naming */
+
+/* See "FQD Context_A field used for [...] */
+/* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */
+#define QM_STASHING_EXCL_ANNOTATION	0x04
+#define QM_STASHING_EXCL_DATA		0x02
+#define QM_STASHING_EXCL_CTX		0x01
+
+/* See "Intra Class Scheduling" */
+/* FQD field 'OAC' (Overhead ACcounting) uses these constants */
+#define QM_OAC_ICS		0x2 /* Accounting for Intra-Class Scheduling */
+#define QM_OAC_CG		0x1 /* Accounting for Congestion Groups */
+
+/*
+ * This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields
+ * and associated commands/responses. The WRED parameters are calculated from
+ * these fields as follows;
+ *   MaxTH = MA * (2 ^ Mn)
+ *   Slope = SA / (2 ^ Sn)
+ *    MaxP = 4 * (Pn + 1)
+ */
+struct qm_cgr_wr_parm {
+	/* MA[24-31], Mn[19-23], SA[12-18], Sn[6-11], Pn[0-5] */
+	__be32 word;
+};
+/*
+ * This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding
+ * management commands, this is padded to a 16-bit structure field, so that's
+ * how we represent it here. The congestion state threshold is calculated from
+ * these fields as follows;
+ *   CS threshold = TA * (2 ^ Tn)
+ */
+struct qm_cgr_cs_thres {
+	/* _res[13-15], TA[5-12], Tn[0-4] */
+	__be16 word;
+};
+/*
+ * This identical structure of CGR fields is present in the "Init/Modify CGR"
+ * commands and the "Query CGR" result. It's suctioned out here into its own
+ * struct.
+ */
+struct __qm_mc_cgr {
+	struct qm_cgr_wr_parm wr_parm_g;
+	struct qm_cgr_wr_parm wr_parm_y;
+	struct qm_cgr_wr_parm wr_parm_r;
+	u8 wr_en_g;	/* boolean, use QM_CGR_EN */
+	u8 wr_en_y;	/* boolean, use QM_CGR_EN */
+	u8 wr_en_r;	/* boolean, use QM_CGR_EN */
+	u8 cscn_en;	/* boolean, use QM_CGR_EN */
+	union {
+		struct {
+			__be16 cscn_targ_upd_ctrl; /* use QM_CGR_TARG_UDP_* */
+			__be16 cscn_targ_dcp_low;
+		};
+		__be32 cscn_targ;	/* use QM_CGR_TARG_* */
+	};
+	u8 cstd_en;	/* boolean, use QM_CGR_EN */
+	u8 cs;		/* boolean, only used in query response */
+	struct qm_cgr_cs_thres cs_thres; /* use qm_cgr_cs_thres_set64() */
+	u8 mode;	/* QMAN_CGR_MODE_FRAME not supported in rev1.0 */
+} __packed;
+#define QM_CGR_EN		0x01 /* For wr_en_*, cscn_en, cstd_en */
+#define QM_CGR_TARG_UDP_CTRL_WRITE_BIT	0x8000 /* value written to portal bit*/
+#define QM_CGR_TARG_UDP_CTRL_DCP	0x4000 /* 0: SWP, 1: DCP */
+#define QM_CGR_TARG_PORTAL(n)	(0x80000000 >> (n)) /* s/w portal, 0-9 */
+#define QM_CGR_TARG_FMAN0	0x00200000 /* direct-connect portal: fman0 */
+#define QM_CGR_TARG_FMAN1	0x00100000 /*			   : fman1 */
+/* Convert CGR thresholds to/from "cs_thres" format */
+static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th)
+{
+	int thres = be16_to_cpu(th->word);
+
+	return ((thres >> 5) & 0xff) << (thres & 0x1f);
+}
+
+static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val,
+					int roundup)
+{
+	u32 e = 0;
+	int oddbit = 0;
+
+	while (val > 0xff) {
+		oddbit = val & 1;
+		val >>= 1;
+		e++;
+		if (roundup && oddbit)
+			val++;
+	}
+	th->word = cpu_to_be16(((val & 0xff) << 5) | (e & 0x1f));
+	return 0;
+}
+
+/* "Initialize FQ" */
+struct qm_mcc_initfq {
+	u8 __reserved1[2];
+	__be16 we_mask;	/* Write Enable Mask */
+	__be32 fqid;	/* 24-bit */
+	__be16 count;	/* Initialises 'count+1' FQDs */
+	struct qm_fqd fqd; /* the FQD fields go here */
+	u8 __reserved2[30];
+} __packed;
+/* "Initialize/Modify CGR" */
+struct qm_mcc_initcgr {
+	u8 __reserve1[2];
+	__be16 we_mask;	/* Write Enable Mask */
+	struct __qm_mc_cgr cgr;	/* CGR fields */
+	u8 __reserved2[2];
+	u8 cgid;
+	u8 __reserved3[32];
+} __packed;
+
+/* INITFQ-specific flags */
+#define QM_INITFQ_WE_MASK		0x01ff	/* 'Write Enable' flags; */
+#define QM_INITFQ_WE_OAC		0x0100
+#define QM_INITFQ_WE_ORPC		0x0080
+#define QM_INITFQ_WE_CGID		0x0040
+#define QM_INITFQ_WE_FQCTRL		0x0020
+#define QM_INITFQ_WE_DESTWQ		0x0010
+#define QM_INITFQ_WE_ICSCRED		0x0008
+#define QM_INITFQ_WE_TDTHRESH		0x0004
+#define QM_INITFQ_WE_CONTEXTB		0x0002
+#define QM_INITFQ_WE_CONTEXTA		0x0001
+/* INITCGR/MODIFYCGR-specific flags */
+#define QM_CGR_WE_MASK			0x07ff	/* 'Write Enable Mask'; */
+#define QM_CGR_WE_WR_PARM_G		0x0400
+#define QM_CGR_WE_WR_PARM_Y		0x0200
+#define QM_CGR_WE_WR_PARM_R		0x0100
+#define QM_CGR_WE_WR_EN_G		0x0080
+#define QM_CGR_WE_WR_EN_Y		0x0040
+#define QM_CGR_WE_WR_EN_R		0x0020
+#define QM_CGR_WE_CSCN_EN		0x0010
+#define QM_CGR_WE_CSCN_TARG		0x0008
+#define QM_CGR_WE_CSTD_EN		0x0004
+#define QM_CGR_WE_CS_THRES		0x0002
+#define QM_CGR_WE_MODE			0x0001
+
+#define QMAN_CGR_FLAG_USE_INIT	     0x00000001
+#define QMAN_CGR_MODE_FRAME          0x00000001
+
+	/* Portal and Frame Queues */
+/* Represents a managed portal */
+struct qman_portal;
+
+/*
+ * This object type represents QMan frame queue descriptors (FQD), it is
+ * cacheline-aligned, and initialised by qman_create_fq(). The structure is
+ * defined further down.
+ */
+struct qman_fq;
+
+/*
+ * This object type represents a QMan congestion group, it is defined further
+ * down.
+ */
+struct qman_cgr;
+
+/*
+ * This enum, and the callback type that returns it, are used when handling
+ * dequeued frames via DQRR. Note that for "null" callbacks registered with the
+ * portal object (for handling dequeues that do not demux because context_b is
+ * NULL), the return value *MUST* be qman_cb_dqrr_consume.
+ */
+enum qman_cb_dqrr_result {
+	/* DQRR entry can be consumed */
+	qman_cb_dqrr_consume,
+	/* Like _consume, but requests parking - FQ must be held-active */
+	qman_cb_dqrr_park,
+	/* Does not consume, for DCA mode only. */
+	qman_cb_dqrr_defer,
+	/*
+	 * Stop processing without consuming this ring entry. Exits the current
+	 * qman_p_poll_dqrr() or interrupt-handling, as appropriate. If within
+	 * an interrupt handler, the callback would typically call
+	 * qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value,
+	 * otherwise the interrupt will reassert immediately.
+	 */
+	qman_cb_dqrr_stop,
+	/* Like qman_cb_dqrr_stop, but consumes the current entry. */
+	qman_cb_dqrr_consume_stop
+};
+typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm,
+					struct qman_fq *fq,
+					const struct qm_dqrr_entry *dqrr,
+					bool sched_napi);
+
+/*
+ * This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They
+ * are always consumed after the callback returns.
+ */
+typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq,
+			   const union qm_mr_entry *msg);
+
+/*
+ * s/w-visible states. Ie. tentatively scheduled + truly scheduled + active +
+ * held-active + held-suspended are just "sched". Things like "retired" will not
+ * be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until
+ * then, to indicate it's completing and to gate attempts to retry the retire
+ * command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's
+ * technically impossible in the case of enqueue DCAs (which refer to DQRR ring
+ * index rather than the FQ that ring entry corresponds to), so repeated park
+ * commands are allowed (if you're silly enough to try) but won't change FQ
+ * state, and the resulting park notifications move FQs from "sched" to
+ * "parked".
+ */
+enum qman_fq_state {
+	qman_fq_state_oos,
+	qman_fq_state_parked,
+	qman_fq_state_sched,
+	qman_fq_state_retired
+};
+
+#define QMAN_FQ_STATE_CHANGING	     0x80000000 /* 'state' is changing */
+#define QMAN_FQ_STATE_NE	     0x40000000 /* retired FQ isn't empty */
+#define QMAN_FQ_STATE_ORL	     0x20000000 /* retired FQ has ORL */
+#define QMAN_FQ_STATE_BLOCKOOS	     0xe0000000 /* if any are set, no OOS */
+#define QMAN_FQ_STATE_CGR_EN	     0x10000000 /* CGR enabled */
+#define QMAN_FQ_STATE_VDQCR	     0x08000000 /* being volatile dequeued */
+
+/*
+ * Frame queue objects (struct qman_fq) are stored within memory passed to
+ * qman_create_fq(), as this allows stashing of caller-provided demux callback
+ * pointers at no extra cost to stashing of (driver-internal) FQ state. If the
+ * caller wishes to add per-FQ state and have it benefit from dequeue-stashing,
+ * they should;
+ *
+ * (a) extend the qman_fq structure with their state; eg.
+ *
+ *     // myfq is allocated and driver_fq callbacks filled in;
+ *     struct my_fq {
+ *	   struct qman_fq base;
+ *	   int an_extra_field;
+ *	   [ ... add other fields to be associated with each FQ ...]
+ *     } *myfq = some_my_fq_allocator();
+ *     struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base);
+ *
+ *     // in a dequeue callback, access extra fields from 'fq' via a cast;
+ *     struct my_fq *myfq = (struct my_fq *)fq;
+ *     do_something_with(myfq->an_extra_field);
+ *     [...]
+ *
+ * (b) when and if configuring the FQ for context stashing, specify how ever
+ *     many cachelines are required to stash 'struct my_fq', to accelerate not
+ *     only the QMan driver but the callback as well.
+ */
+
+struct qman_fq_cb {
+	qman_cb_dqrr dqrr;	/* for dequeued frames */
+	qman_cb_mr ern;		/* for s/w ERNs */
+	qman_cb_mr fqs;		/* frame-queue state changes*/
+};
+
+struct qman_fq {
+	/* Caller of qman_create_fq() provides these demux callbacks */
+	struct qman_fq_cb cb;
+	/*
+	 * These are internal to the driver, don't touch. In particular, they
+	 * may change, be removed, or extended (so you shouldn't rely on
+	 * sizeof(qman_fq) being a constant).
+	 */
+	u32 fqid, idx;
+	unsigned long flags;
+	enum qman_fq_state state;
+	int cgr_groupid;
+};
+
+/*
+ * This callback type is used when handling congestion group entry/exit.
+ * 'congested' is non-zero on congestion-entry, and zero on congestion-exit.
+ */
+typedef void (*qman_cb_cgr)(struct qman_portal *qm,
+			    struct qman_cgr *cgr, int congested);
+
+struct qman_cgr {
+	/* Set these prior to qman_create_cgr() */
+	u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/
+	qman_cb_cgr cb;
+	/* These are private to the driver */
+	u16 chan; /* portal channel this object is created on */
+	struct list_head node;
+};
+
+/* Flags to qman_create_fq() */
+#define QMAN_FQ_FLAG_NO_ENQUEUE	     0x00000001 /* can't enqueue */
+#define QMAN_FQ_FLAG_NO_MODIFY	     0x00000002 /* can only enqueue */
+#define QMAN_FQ_FLAG_TO_DCPORTAL     0x00000004 /* consumed by CAAM/PME/Fman */
+#define QMAN_FQ_FLAG_DYNAMIC_FQID    0x00000020 /* (de)allocate fqid */
+
+/* Flags to qman_init_fq() */
+#define QMAN_INITFQ_FLAG_SCHED	     0x00000001 /* schedule rather than park */
+#define QMAN_INITFQ_FLAG_LOCAL	     0x00000004 /* set dest portal */
+
+/*
+ * For qman_volatile_dequeue(); Choose one PRECEDENCE. EXACT is optional. Use
+ * NUMFRAMES(n) (6-bit) or NUMFRAMES_TILLEMPTY to fill in the frame-count. Use
+ * FQID(n) to fill in the frame queue ID.
+ */
+#define QM_VDQCR_PRECEDENCE_VDQCR	0x0
+#define QM_VDQCR_PRECEDENCE_SDQCR	0x80000000
+#define QM_VDQCR_EXACT			0x40000000
+#define QM_VDQCR_NUMFRAMES_MASK		0x3f000000
+#define QM_VDQCR_NUMFRAMES_SET(n)	(((n) & 0x3f) << 24)
+#define QM_VDQCR_NUMFRAMES_GET(n)	(((n) >> 24) & 0x3f)
+#define QM_VDQCR_NUMFRAMES_TILLEMPTY	QM_VDQCR_NUMFRAMES_SET(0)
+
+#define QMAN_VOLATILE_FLAG_WAIT	     0x00000001 /* wait if VDQCR is in use */
+#define QMAN_VOLATILE_FLAG_WAIT_INT  0x00000002 /* if wait, interruptible? */
+#define QMAN_VOLATILE_FLAG_FINISH    0x00000004 /* wait till VDQCR completes */
+
+/* "Query FQ Non-Programmable Fields" */
+struct qm_mcr_queryfq_np {
+	u8 verb;
+	u8 result;
+	u8 __reserved1;
+	u8 state;		/* QM_MCR_NP_STATE_*** */
+	u32 fqd_link;		/* 24-bit, _res2[24-31] */
+	u16 odp_seq;		/* 14-bit, _res3[14-15] */
+	u16 orp_nesn;		/* 14-bit, _res4[14-15] */
+	u16 orp_ea_hseq;	/* 15-bit, _res5[15] */
+	u16 orp_ea_tseq;	/* 15-bit, _res6[15] */
+	u32 orp_ea_hptr;	/* 24-bit, _res7[24-31] */
+	u32 orp_ea_tptr;	/* 24-bit, _res8[24-31] */
+	u32 pfdr_hptr;		/* 24-bit, _res9[24-31] */
+	u32 pfdr_tptr;		/* 24-bit, _res10[24-31] */
+	u8 __reserved2[5];
+	u8 is;			/* 1-bit, _res12[1-7] */
+	u16 ics_surp;
+	u32 byte_cnt;
+	u32 frm_cnt;		/* 24-bit, _res13[24-31] */
+	u32 __reserved3;
+	u16 ra1_sfdr;		/* QM_MCR_NP_RA1_*** */
+	u16 ra2_sfdr;		/* QM_MCR_NP_RA2_*** */
+	u16 __reserved4;
+	u16 od1_sfdr;		/* QM_MCR_NP_OD1_*** */
+	u16 od2_sfdr;		/* QM_MCR_NP_OD2_*** */
+	u16 od3_sfdr;		/* QM_MCR_NP_OD3_*** */
+} __packed;
+
+#define QM_MCR_NP_STATE_FE		0x10
+#define QM_MCR_NP_STATE_R		0x08
+#define QM_MCR_NP_STATE_MASK		0x07	/* Reads FQD::STATE; */
+#define QM_MCR_NP_STATE_OOS		0x00
+#define QM_MCR_NP_STATE_RETIRED		0x01
+#define QM_MCR_NP_STATE_TEN_SCHED	0x02
+#define QM_MCR_NP_STATE_TRU_SCHED	0x03
+#define QM_MCR_NP_STATE_PARKED		0x04
+#define QM_MCR_NP_STATE_ACTIVE		0x05
+#define QM_MCR_NP_PTR_MASK		0x07ff	/* for RA[12] & OD[123] */
+#define QM_MCR_NP_RA1_NRA(v)		(((v) >> 14) & 0x3)	/* FQD::NRA */
+#define QM_MCR_NP_RA2_IT(v)		(((v) >> 14) & 0x1)	/* FQD::IT */
+#define QM_MCR_NP_OD1_NOD(v)		(((v) >> 14) & 0x3)	/* FQD::NOD */
+#define QM_MCR_NP_OD3_NPC(v)		(((v) >> 14) & 0x3)	/* FQD::NPC */
+
+enum qm_mcr_queryfq_np_masks {
+	qm_mcr_fqd_link_mask = BIT(24) - 1,
+	qm_mcr_odp_seq_mask = BIT(14) - 1,
+	qm_mcr_orp_nesn_mask = BIT(14) - 1,
+	qm_mcr_orp_ea_hseq_mask = BIT(15) - 1,
+	qm_mcr_orp_ea_tseq_mask = BIT(15) - 1,
+	qm_mcr_orp_ea_hptr_mask = BIT(24) - 1,
+	qm_mcr_orp_ea_tptr_mask = BIT(24) - 1,
+	qm_mcr_pfdr_hptr_mask = BIT(24) - 1,
+	qm_mcr_pfdr_tptr_mask = BIT(24) - 1,
+	qm_mcr_is_mask = BIT(1) - 1,
+	qm_mcr_frm_cnt_mask = BIT(24) - 1,
+};
+
+#define qm_mcr_np_get(np, field) \
+	((np)->field & (qm_mcr_##field##_mask))
+
+	/* Portal Management */
+/**
+ * qman_p_irqsource_add - add processing sources to be interrupt-driven
+ * @bits: bitmask of QM_PIRQ_**I processing sources
+ *
+ * Adds processing sources that should be interrupt-driven (rather than
+ * processed via qman_poll_***() functions).
+ */
+void qman_p_irqsource_add(struct qman_portal *p, u32 bits);
+
+/**
+ * qman_p_irqsource_remove - remove processing sources from being int-driven
+ * @bits: bitmask of QM_PIRQ_**I processing sources
+ *
+ * Removes processing sources from being interrupt-driven, so that they will
+ * instead be processed via qman_poll_***() functions.
+ */
+void qman_p_irqsource_remove(struct qman_portal *p, u32 bits);
+
+/**
+ * qman_affine_cpus - return a mask of cpus that have affine portals
+ */
+const cpumask_t *qman_affine_cpus(void);
+
+/**
+ * qman_affine_channel - return the channel ID of an portal
+ * @cpu: the cpu whose affine portal is the subject of the query
+ *
+ * If @cpu is -1, the affine portal for the current CPU will be used. It is a
+ * bug to call this function for any value of @cpu (other than -1) that is not a
+ * member of the mask returned from qman_affine_cpus().
+ */
+u16 qman_affine_channel(int cpu);
+
+/**
+ * qman_get_affine_portal - return the portal pointer affine to cpu
+ * @cpu: the cpu whose affine portal is the subject of the query
+ */
+struct qman_portal *qman_get_affine_portal(int cpu);
+
+/**
+ * qman_start_using_portal - register a device link for the portal user
+ * @p: the portal that will be in use
+ * @dev: the device that will use the portal
+ *
+ * Makes sure that the devices that use the portal are unbound when the
+ * portal is unbound
+ */
+int qman_start_using_portal(struct qman_portal *p, struct device *dev);
+
+/**
+ * qman_p_poll_dqrr - process DQRR (fast-path) entries
+ * @limit: the maximum number of DQRR entries to process
+ *
+ * Use of this function requires that DQRR processing not be interrupt-driven.
+ * The return value represents the number of DQRR entries processed.
+ */
+int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit);
+
+/**
+ * qman_p_static_dequeue_add - Add pool channels to the portal SDQCR
+ * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n)
+ *
+ * Adds a set of pool channels to the portal's static dequeue command register
+ * (SDQCR). The requested pools are limited to those the portal has dequeue
+ * access to.
+ */
+void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools);
+
+	/* FQ management */
+/**
+ * qman_create_fq - Allocates a FQ
+ * @fqid: the index of the FQD to encapsulate, must be "Out of Service"
+ * @flags: bit-mask of QMAN_FQ_FLAG_*** options
+ * @fq: memory for storing the 'fq', with callbacks filled in
+ *
+ * Creates a frame queue object for the given @fqid, unless the
+ * QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is
+ * dynamically allocated (or the function fails if none are available). Once
+ * created, the caller should not touch the memory at 'fq' except as extended to
+ * adjacent memory for user-defined fields (see the definition of "struct
+ * qman_fq" for more info). NO_MODIFY is only intended for enqueuing to
+ * pre-existing frame-queues that aren't to be otherwise interfered with, it
+ * prevents all other modifications to the frame queue. The TO_DCPORTAL flag
+ * causes the driver to honour any context_b modifications requested in the
+ * qm_init_fq() API, as this indicates the frame queue will be consumed by a
+ * direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by
+ * software portals, the context_b field is controlled by the driver and can't
+ * be modified by the caller.
+ */
+int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq);
+
+/**
+ * qman_destroy_fq - Deallocates a FQ
+ * @fq: the frame queue object to release
+ *
+ * The memory for this frame queue object ('fq' provided in qman_create_fq()) is
+ * not deallocated but the caller regains ownership, to do with as desired. The
+ * FQ must be in the 'out-of-service' or in the 'parked' state.
+ */
+void qman_destroy_fq(struct qman_fq *fq);
+
+/**
+ * qman_fq_fqid - Queries the frame queue ID of a FQ object
+ * @fq: the frame queue object to query
+ */
+u32 qman_fq_fqid(struct qman_fq *fq);
+
+/**
+ * qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled"
+ * @fq: the frame queue object to modify, must be 'parked' or new.
+ * @flags: bit-mask of QMAN_INITFQ_FLAG_*** options
+ * @opts: the FQ-modification settings, as defined in the low-level API
+ *
+ * The @opts parameter comes from the low-level portal API. Select
+ * QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled
+ * rather than parked. NB, @opts can be NULL.
+ *
+ * Note that some fields and options within @opts may be ignored or overwritten
+ * by the driver;
+ * 1. the 'count' and 'fqid' fields are always ignored (this operation only
+ * affects one frame queue: @fq).
+ * 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated
+ * 'fqd' structure's 'context_b' field are sometimes overwritten;
+ *   - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is
+ *     initialised to a value used by the driver for demux.
+ *   - if context_b is initialised for demux, so is context_a in case stashing
+ *     is requested (see item 4).
+ * (So caller control of context_b is only possible for TO_DCPORTAL frame queue
+ * objects.)
+ * 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's
+ * 'dest::channel' field will be overwritten to match the portal used to issue
+ * the command. If the WE_DESTWQ write-enable bit had already been set by the
+ * caller, the channel workqueue will be left as-is, otherwise the write-enable
+ * bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag
+ * isn't set, the destination channel/workqueue fields and the write-enable bit
+ * are left as-is.
+ * 4. if the driver overwrites context_a/b for demux, then if
+ * QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite
+ * context_a.address fields and will leave the stashing fields provided by the
+ * user alone, otherwise it will zero out the context_a.stashing fields.
+ */
+int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts);
+
+/**
+ * qman_schedule_fq - Schedules a FQ
+ * @fq: the frame queue object to schedule, must be 'parked'
+ *
+ * Schedules the frame queue, which must be Parked, which takes it to
+ * Tentatively-Scheduled or Truly-Scheduled depending on its fill-level.
+ */
+int qman_schedule_fq(struct qman_fq *fq);
+
+/**
+ * qman_retire_fq - Retires a FQ
+ * @fq: the frame queue object to retire
+ * @flags: FQ flags (QMAN_FQ_STATE*) if retirement completes immediately
+ *
+ * Retires the frame queue. This returns zero if it succeeds immediately, +1 if
+ * the retirement was started asynchronously, otherwise it returns negative for
+ * failure. When this function returns zero, @flags is set to indicate whether
+ * the retired FQ is empty and/or whether it has any ORL fragments (to show up
+ * as ERNs). Otherwise the corresponding flags will be known when a subsequent
+ * FQRN message shows up on the portal's message ring.
+ *
+ * NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or
+ * Active state), the completion will be via the message ring as a FQRN - but
+ * the corresponding callback may occur before this function returns!! Ie. the
+ * caller should be prepared to accept the callback as the function is called,
+ * not only once it has returned.
+ */
+int qman_retire_fq(struct qman_fq *fq, u32 *flags);
+
+/**
+ * qman_oos_fq - Puts a FQ "out of service"
+ * @fq: the frame queue object to be put out-of-service, must be 'retired'
+ *
+ * The frame queue must be retired and empty, and if any order restoration list
+ * was released as ERNs at the time of retirement, they must all be consumed.
+ */
+int qman_oos_fq(struct qman_fq *fq);
+
+/*
+ * qman_volatile_dequeue - Issue a volatile dequeue command
+ * @fq: the frame queue object to dequeue from
+ * @flags: a bit-mask of QMAN_VOLATILE_FLAG_*** options
+ * @vdqcr: bit mask of QM_VDQCR_*** options, as per qm_dqrr_vdqcr_set()
+ *
+ * Attempts to lock access to the portal's VDQCR volatile dequeue functionality.
+ * The function will block and sleep if QMAN_VOLATILE_FLAG_WAIT is specified and
+ * the VDQCR is already in use, otherwise returns non-zero for failure. If
+ * QMAN_VOLATILE_FLAG_FINISH is specified, the function will only return once
+ * the VDQCR command has finished executing (ie. once the callback for the last
+ * DQRR entry resulting from the VDQCR command has been called). If not using
+ * the FINISH flag, completion can be determined either by detecting the
+ * presence of the QM_DQRR_STAT_UNSCHEDULED and QM_DQRR_STAT_DQCR_EXPIRED bits
+ * in the "stat" parameter passed to the FQ's dequeue callback, or by waiting
+ * for the QMAN_FQ_STATE_VDQCR bit to disappear.
+ */
+int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr);
+
+/**
+ * qman_enqueue - Enqueue a frame to a frame queue
+ * @fq: the frame queue object to enqueue to
+ * @fd: a descriptor of the frame to be enqueued
+ *
+ * Fills an entry in the EQCR of portal @qm to enqueue the frame described by
+ * @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid'
+ * field is ignored. The return value is non-zero on error, such as ring full.
+ */
+int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd);
+
+/**
+ * qman_alloc_fqid_range - Allocate a contiguous range of FQIDs
+ * @result: is set by the API to the base FQID of the allocated range
+ * @count: the number of FQIDs required
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_alloc_fqid_range(u32 *result, u32 count);
+#define qman_alloc_fqid(result) qman_alloc_fqid_range(result, 1)
+
+/**
+ * qman_release_fqid - Release the specified frame queue ID
+ * @fqid: the FQID to be released back to the resource pool
+ *
+ * This function can also be used to seed the allocator with
+ * FQID ranges that it can subsequently allocate from.
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_release_fqid(u32 fqid);
+
+/**
+ * qman_query_fq_np - Queries non-programmable FQD fields
+ * @fq: the frame queue object to be queried
+ * @np: storage for the queried FQD fields
+ */
+int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np);
+
+	/* Pool-channel management */
+/**
+ * qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs
+ * @result: is set by the API to the base pool-channel ID of the allocated range
+ * @count: the number of pool-channel IDs required
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_alloc_pool_range(u32 *result, u32 count);
+#define qman_alloc_pool(result) qman_alloc_pool_range(result, 1)
+
+/**
+ * qman_release_pool - Release the specified pool-channel ID
+ * @id: the pool-chan ID to be released back to the resource pool
+ *
+ * This function can also be used to seed the allocator with
+ * pool-channel ID ranges that it can subsequently allocate from.
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_release_pool(u32 id);
+
+	/* CGR management */
+/**
+ * qman_create_cgr - Register a congestion group object
+ * @cgr: the 'cgr' object, with fields filled in
+ * @flags: QMAN_CGR_FLAG_* values
+ * @opts: optional state of CGR settings
+ *
+ * Registers this object to receiving congestion entry/exit callbacks on the
+ * portal affine to the cpu portal on which this API is executed. If opts is
+ * NULL then only the callback (cgr->cb) function is registered. If @flags
+ * contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset
+ * any unspecified parameters) will be used rather than a modify hw hardware
+ * (which only modifies the specified parameters).
+ */
+int qman_create_cgr(struct qman_cgr *cgr, u32 flags,
+		    struct qm_mcc_initcgr *opts);
+
+/**
+ * qman_delete_cgr - Deregisters a congestion group object
+ * @cgr: the 'cgr' object to deregister
+ *
+ * "Unplugs" this CGR object from the portal affine to the cpu on which this API
+ * is executed. This must be excuted on the same affine portal on which it was
+ * created.
+ */
+int qman_delete_cgr(struct qman_cgr *cgr);
+
+/**
+ * qman_delete_cgr_safe - Deregisters a congestion group object from any CPU
+ * @cgr: the 'cgr' object to deregister
+ *
+ * This will select the proper CPU and run there qman_delete_cgr().
+ */
+void qman_delete_cgr_safe(struct qman_cgr *cgr);
+
+/**
+ * qman_update_cgr_safe - Modifies a congestion group object from any CPU
+ * @cgr: the 'cgr' object to modify
+ * @opts: state of the CGR settings
+ *
+ * This will select the proper CPU and modify the CGR settings.
+ */
+int qman_update_cgr_safe(struct qman_cgr *cgr, struct qm_mcc_initcgr *opts);
+
+/**
+ * qman_query_cgr_congested - Queries CGR's congestion status
+ * @cgr: the 'cgr' object to query
+ * @result: returns 'cgr's congestion status, 1 (true) if congested
+ */
+int qman_query_cgr_congested(struct qman_cgr *cgr, bool *result);
+
+/**
+ * qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs
+ * @result: is set by the API to the base CGR ID of the allocated range
+ * @count: the number of CGR IDs required
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_alloc_cgrid_range(u32 *result, u32 count);
+#define qman_alloc_cgrid(result) qman_alloc_cgrid_range(result, 1)
+
+/**
+ * qman_release_cgrid - Release the specified CGR ID
+ * @id: the CGR ID to be released back to the resource pool
+ *
+ * This function can also be used to seed the allocator with
+ * CGR ID ranges that it can subsequently allocate from.
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_release_cgrid(u32 id);
+
+/**
+ * qman_is_probed - Check if qman is probed
+ *
+ * Returns 1 if the qman driver successfully probed, -1 if the qman driver
+ * failed to probe or 0 if the qman driver did not probed yet.
+ */
+int qman_is_probed(void);
+
+/**
+ * qman_portals_probed - Check if all cpu bound qman portals are probed
+ *
+ * Returns 1 if all the required cpu bound qman portals successfully probed,
+ * -1 if probe errors appeared or 0 if the qman portals did not yet finished
+ * probing.
+ */
+int qman_portals_probed(void);
+
+/**
+ * qman_dqrr_get_ithresh - Get coalesce interrupt threshold
+ * @portal: portal to get the value for
+ * @ithresh: threshold pointer
+ */
+void qman_dqrr_get_ithresh(struct qman_portal *portal, u8 *ithresh);
+
+/**
+ * qman_dqrr_set_ithresh - Set coalesce interrupt threshold
+ * @portal: portal to set the new value on
+ * @ithresh: new threshold value
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh);
+
+/**
+ * qman_dqrr_get_iperiod - Get coalesce interrupt period
+ * @portal: portal to get the value for
+ * @iperiod: period pointer
+ */
+void qman_portal_get_iperiod(struct qman_portal *portal, u32 *iperiod);
+
+/**
+ * qman_dqrr_set_iperiod - Set coalesce interrupt period
+ * @portal: portal to set the new value on
+ * @ithresh: new period value
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_portal_set_iperiod(struct qman_portal *portal, u32 iperiod);
+
+#endif	/* __FSL_QMAN_H */