Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 753 insertions, 0 deletions

diff --git a/lib/Kconfig b/lib/Kconfig
new file mode 100644
index 000000000..9bbf8a4b2
--- /dev/null
+++ b/lib/Kconfig
@@ -0,0 +1,753 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Library configuration
+#
+
+config BINARY_PRINTF
+	def_bool n
+
+menu "Library routines"
+
+config RAID6_PQ
+	tristate
+
+config RAID6_PQ_BENCHMARK
+	bool "Automatically choose fastest RAID6 PQ functions"
+	depends on RAID6_PQ
+	default y
+	help
+	  Benchmark all available RAID6 PQ functions on init and choose the
+	  fastest one.
+
+config LINEAR_RANGES
+	tristate
+
+config PACKING
+	bool "Generic bitfield packing and unpacking"
+	default n
+	help
+	  This option provides the packing() helper function, which permits
+	  converting bitfields between a CPU-usable representation and a
+	  memory representation that can have any combination of these quirks:
+	    - Is little endian (bytes are reversed within a 32-bit group)
+	    - The least-significant 32-bit word comes first (within a 64-bit
+	      group)
+	    - The most significant bit of a byte is at its right (bit 0 of a
+	      register description is numerically 2^7).
+	  Drivers may use these helpers to match the bit indices as described
+	  in the data sheets of the peripherals they are in control of.
+
+	  When in doubt, say N.
+
+config BITREVERSE
+	tristate
+
+config HAVE_ARCH_BITREVERSE
+	bool
+	default n
+	help
+	  This option enables the use of hardware bit-reversal instructions on
+	  architectures which support such operations.
+
+config ARCH_HAS_STRNCPY_FROM_USER
+	bool
+
+config ARCH_HAS_STRNLEN_USER
+	bool
+
+config GENERIC_STRNCPY_FROM_USER
+	def_bool !ARCH_HAS_STRNCPY_FROM_USER
+
+config GENERIC_STRNLEN_USER
+	def_bool !ARCH_HAS_STRNLEN_USER
+
+config GENERIC_NET_UTILS
+	bool
+
+source "lib/math/Kconfig"
+
+config NO_GENERIC_PCI_IOPORT_MAP
+	bool
+
+config GENERIC_PCI_IOMAP
+	bool
+
+config GENERIC_IOMAP
+	bool
+	select GENERIC_PCI_IOMAP
+
+config STMP_DEVICE
+	bool
+
+config ARCH_USE_CMPXCHG_LOCKREF
+	bool
+
+config ARCH_HAS_FAST_MULTIPLIER
+	bool
+
+config ARCH_USE_SYM_ANNOTATIONS
+	bool
+
+config INDIRECT_PIO
+	bool "Access I/O in non-MMIO mode"
+	depends on ARM64
+	help
+	  On some platforms where no separate I/O space exists, there are I/O
+	  hosts which can not be accessed in MMIO mode. Using the logical PIO
+	  mechanism, the host-local I/O resource can be mapped into system
+	  logic PIO space shared with MMIO hosts, such as PCI/PCIe, then the
+	  system can access the I/O devices with the mapped-logic PIO through
+	  I/O accessors.
+
+	  This way has relatively little I/O performance cost. Please make
+	  sure your devices really need this configure item enabled.
+
+	  When in doubt, say N.
+
+config INDIRECT_IOMEM
+	bool
+	help
+	  This is selected by other options/architectures to provide the
+	  emulated iomem accessors.
+
+config INDIRECT_IOMEM_FALLBACK
+	bool
+	depends on INDIRECT_IOMEM
+	help
+	  If INDIRECT_IOMEM is selected, this enables falling back to plain
+	  mmio accesses when the IO memory address is not a registered
+	  emulated region.
+
+config TRACE_MMIO_ACCESS
+	bool "Register read/write tracing"
+	depends on TRACING && ARCH_HAVE_TRACE_MMIO_ACCESS
+	help
+	  Create tracepoints for MMIO read/write operations. These trace events
+	  can be used for logging all MMIO read/write operations.
+
+source "lib/crypto/Kconfig"
+
+config CRC_CCITT
+	tristate "CRC-CCITT functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC-CCITT functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC-CCITT
+	  functions require M here.
+
+config CRC16
+	tristate "CRC16 functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC16 functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC16
+	  functions require M here.
+
+config CRC_T10DIF
+	tristate "CRC calculation for the T10 Data Integrity Field"
+	select CRYPTO
+	select CRYPTO_CRCT10DIF
+	help
+	  This option is only needed if a module that's not in the
+	  kernel tree needs to calculate CRC checks for use with the
+	  SCSI data integrity subsystem.
+
+config CRC64_ROCKSOFT
+	tristate "CRC calculation for the Rocksoft model CRC64"
+	select CRC64
+	select CRYPTO
+	select CRYPTO_CRC64_ROCKSOFT
+	help
+	  This option provides a CRC64 API to a registered crypto driver.
+	  This is used with the block layer's data integrity subsystem.
+
+config CRC_ITU_T
+	tristate "CRC ITU-T V.41 functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC ITU-T V.41 functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC ITU-T V.41
+	  functions require M here.
+
+config CRC32
+	tristate "CRC32/CRC32c functions"
+	default y
+	select BITREVERSE
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC32/CRC32c functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC32/CRC32c
+	  functions require M here.
+
+config CRC32_SELFTEST
+	tristate "CRC32 perform self test on init"
+	depends on CRC32
+	help
+	  This option enables the CRC32 library functions to perform a
+	  self test on initialization. The self test computes crc32_le
+	  and crc32_be over byte strings with random alignment and length
+	  and computes the total elapsed time and number of bytes processed.
+
+choice
+	prompt "CRC32 implementation"
+	depends on CRC32
+	default CRC32_SLICEBY8
+	help
+	  This option allows a kernel builder to override the default choice
+	  of CRC32 algorithm.  Choose the default ("slice by 8") unless you
+	  know that you need one of the others.
+
+config CRC32_SLICEBY8
+	bool "Slice by 8 bytes"
+	help
+	  Calculate checksum 8 bytes at a time with a clever slicing algorithm.
+	  This is the fastest algorithm, but comes with a 8KiB lookup table.
+	  Most modern processors have enough cache to hold this table without
+	  thrashing the cache.
+
+	  This is the default implementation choice.  Choose this one unless
+	  you have a good reason not to.
+
+config CRC32_SLICEBY4
+	bool "Slice by 4 bytes"
+	help
+	  Calculate checksum 4 bytes at a time with a clever slicing algorithm.
+	  This is a bit slower than slice by 8, but has a smaller 4KiB lookup
+	  table.
+
+	  Only choose this option if you know what you are doing.
+
+config CRC32_SARWATE
+	bool "Sarwate's Algorithm (one byte at a time)"
+	help
+	  Calculate checksum a byte at a time using Sarwate's algorithm.  This
+	  is not particularly fast, but has a small 256 byte lookup table.
+
+	  Only choose this option if you know what you are doing.
+
+config CRC32_BIT
+	bool "Classic Algorithm (one bit at a time)"
+	help
+	  Calculate checksum one bit at a time.  This is VERY slow, but has
+	  no lookup table.  This is provided as a debugging option.
+
+	  Only choose this option if you are debugging crc32.
+
+endchoice
+
+config CRC64
+	tristate "CRC64 functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC64 functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC64
+	  functions require M here.
+
+config CRC4
+	tristate "CRC4 functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC4 functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC4
+	  functions require M here.
+
+config CRC7
+	tristate "CRC7 functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC7 functions, but a module built outside
+	  the kernel tree does. Such modules that use library CRC7
+	  functions require M here.
+
+config LIBCRC32C
+	tristate "CRC32c (Castagnoli, et al) Cyclic Redundancy-Check"
+	select CRYPTO
+	select CRYPTO_CRC32C
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC32c functions, but a module built outside the
+	  kernel tree does. Such modules that use library CRC32c functions
+	  require M here.  See Castagnoli93.
+	  Module will be libcrc32c.
+
+config CRC8
+	tristate "CRC8 function"
+	help
+	  This option provides CRC8 function. Drivers may select this
+	  when they need to do cyclic redundancy check according CRC8
+	  algorithm. Module will be called crc8.
+
+config XXHASH
+	tristate
+
+config AUDIT_GENERIC
+	bool
+	depends on AUDIT && !AUDIT_ARCH
+	default y
+
+config AUDIT_ARCH_COMPAT_GENERIC
+	bool
+	default n
+
+config AUDIT_COMPAT_GENERIC
+	bool
+	depends on AUDIT_GENERIC && AUDIT_ARCH_COMPAT_GENERIC && COMPAT
+	default y
+
+config RANDOM32_SELFTEST
+	bool "PRNG perform self test on init"
+	help
+	  This option enables the 32 bit PRNG library functions to perform a
+	  self test on initialization.
+
+#
+# compression support is select'ed if needed
+#
+config 842_COMPRESS
+	select CRC32
+	tristate
+
+config 842_DECOMPRESS
+	select CRC32
+	tristate
+
+config ZLIB_INFLATE
+	tristate
+
+config ZLIB_DEFLATE
+	tristate
+	select BITREVERSE
+
+config ZLIB_DFLTCC
+	def_bool y
+	depends on S390
+	prompt "Enable s390x DEFLATE CONVERSION CALL support for kernel zlib"
+	help
+	 Enable s390x hardware support for zlib in the kernel.
+
+config LZO_COMPRESS
+	tristate
+
+config LZO_DECOMPRESS
+	tristate
+
+config LZ4_COMPRESS
+	tristate
+
+config LZ4HC_COMPRESS
+	tristate
+
+config LZ4_DECOMPRESS
+	tristate
+
+config ZSTD_COMMON
+	select XXHASH
+	tristate
+
+config ZSTD_COMPRESS
+	select ZSTD_COMMON
+	tristate
+
+config ZSTD_DECOMPRESS
+	select ZSTD_COMMON
+	tristate
+
+source "lib/xz/Kconfig"
+
+#
+# These all provide a common interface (hence the apparent duplication with
+# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+#
+config DECOMPRESS_GZIP
+	select ZLIB_INFLATE
+	tristate
+
+config DECOMPRESS_BZIP2
+	tristate
+
+config DECOMPRESS_LZMA
+	tristate
+
+config DECOMPRESS_XZ
+	select XZ_DEC
+	tristate
+
+config DECOMPRESS_LZO
+	select LZO_DECOMPRESS
+	tristate
+
+config DECOMPRESS_LZ4
+	select LZ4_DECOMPRESS
+	tristate
+
+config DECOMPRESS_ZSTD
+	select ZSTD_DECOMPRESS
+	tristate
+
+#
+# Generic allocator support is selected if needed
+#
+config GENERIC_ALLOCATOR
+	bool
+
+#
+# reed solomon support is select'ed if needed
+#
+config REED_SOLOMON
+	tristate
+	
+config REED_SOLOMON_ENC8
+	bool
+
+config REED_SOLOMON_DEC8
+	bool
+
+config REED_SOLOMON_ENC16
+	bool
+
+config REED_SOLOMON_DEC16
+	bool
+
+#
+# BCH support is selected if needed
+#
+config BCH
+	tristate
+
+config BCH_CONST_PARAMS
+	bool
+	help
+	  Drivers may select this option to force specific constant
+	  values for parameters 'm' (Galois field order) and 't'
+	  (error correction capability). Those specific values must
+	  be set by declaring default values for symbols BCH_CONST_M
+	  and BCH_CONST_T.
+	  Doing so will enable extra compiler optimizations,
+	  improving encoding and decoding performance up to 2x for
+	  usual (m,t) values (typically such that m*t < 200).
+	  When this option is selected, the BCH library supports
+	  only a single (m,t) configuration. This is mainly useful
+	  for NAND flash board drivers requiring known, fixed BCH
+	  parameters.
+
+config BCH_CONST_M
+	int
+	range 5 15
+	help
+	  Constant value for Galois field order 'm'. If 'k' is the
+	  number of data bits to protect, 'm' should be chosen such
+	  that (k + m*t) <= 2**m - 1.
+	  Drivers should declare a default value for this symbol if
+	  they select option BCH_CONST_PARAMS.
+
+config BCH_CONST_T
+	int
+	help
+	  Constant value for error correction capability in bits 't'.
+	  Drivers should declare a default value for this symbol if
+	  they select option BCH_CONST_PARAMS.
+
+#
+# Textsearch support is select'ed if needed
+#
+config TEXTSEARCH
+	bool
+
+config TEXTSEARCH_KMP
+	tristate
+
+config TEXTSEARCH_BM
+	tristate
+
+config TEXTSEARCH_FSM
+	tristate
+
+config BTREE
+	bool
+
+config INTERVAL_TREE
+	bool
+	help
+	  Simple, embeddable, interval-tree. Can find the start of an
+	  overlapping range in log(n) time and then iterate over all
+	  overlapping nodes. The algorithm is implemented as an
+	  augmented rbtree.
+
+	  See:
+
+		Documentation/core-api/rbtree.rst
+
+	  for more information.
+
+config XARRAY_MULTI
+	bool
+	help
+	  Support entries which occupy multiple consecutive indices in the
+	  XArray.
+
+config ASSOCIATIVE_ARRAY
+	bool
+	help
+	  Generic associative array.  Can be searched and iterated over whilst
+	  it is being modified.  It is also reasonably quick to search and
+	  modify.  The algorithms are non-recursive, and the trees are highly
+	  capacious.
+
+	  See:
+
+		Documentation/core-api/assoc_array.rst
+
+	  for more information.
+
+config HAS_IOMEM
+	bool
+	depends on !NO_IOMEM
+	default y
+
+config HAS_IOPORT_MAP
+	bool
+	depends on HAS_IOMEM && !NO_IOPORT_MAP
+	default y
+
+source "kernel/dma/Kconfig"
+
+config SGL_ALLOC
+	bool
+	default n
+
+config IOMMU_HELPER
+	bool
+
+config CHECK_SIGNATURE
+	bool
+
+config CPUMASK_OFFSTACK
+	bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS
+	help
+	  Use dynamic allocation for cpumask_var_t, instead of putting
+	  them on the stack.  This is a bit more expensive, but avoids
+	  stack overflow.
+
+config FORCE_NR_CPUS
+       bool "NR_CPUS is set to an actual number of CPUs"
+       depends on SMP
+       help
+         Say Yes if you have NR_CPUS set to an actual number of possible
+         CPUs in your system, not to a default value. This forces the core
+         code to rely on compile-time value and optimize kernel routines
+         better.
+
+config CPU_RMAP
+	bool
+	depends on SMP
+
+config DQL
+	bool
+
+config GLOB
+	bool
+#	This actually supports modular compilation, but the module overhead
+#	is ridiculous for the amount of code involved.	Until an out-of-tree
+#	driver asks for it, we'll just link it directly it into the kernel
+#	when required.  Since we're ignoring out-of-tree users,	there's also
+#	no need bother prompting for a manual decision:
+#	prompt "glob_match() function"
+	help
+	  This option provides a glob_match function for performing
+	  simple text pattern matching.  It originated in the ATA code
+	  to blacklist particular drive models, but other device drivers
+	  may need similar functionality.
+
+	  All drivers in the Linux kernel tree that require this function
+	  should automatically select this option.  Say N unless you
+	  are compiling an out-of tree driver which tells you that it
+	  depends on this.
+
+config GLOB_SELFTEST
+	tristate "glob self-test on init"
+	depends on GLOB
+	help
+	  This option enables a simple self-test of the glob_match
+	  function on startup.	It is primarily useful for people
+	  working on the code to ensure they haven't introduced any
+	  regressions.
+
+	  It only adds a little bit of code and slows kernel boot (or
+	  module load) by a small amount, so you're welcome to play with
+	  it, but you probably don't need it.
+
+#
+# Netlink attribute parsing support is select'ed if needed
+#
+config NLATTR
+	bool
+
+#
+# Generic 64-bit atomic support is selected if needed
+#
+config GENERIC_ATOMIC64
+       bool
+
+config LRU_CACHE
+	tristate
+
+config CLZ_TAB
+	bool
+
+config IRQ_POLL
+	bool "IRQ polling library"
+	help
+	  Helper library to poll interrupt mitigation using polling.
+
+config MPILIB
+	tristate
+	select CLZ_TAB
+	help
+	  Multiprecision maths library from GnuPG.
+	  It is used to implement RSA digital signature verification,
+	  which is used by IMA/EVM digital signature extension.
+
+config SIGNATURE
+	tristate
+	depends on KEYS
+	select CRYPTO
+	select CRYPTO_SHA1
+	select MPILIB
+	help
+	  Digital signature verification. Currently only RSA is supported.
+	  Implementation is done using GnuPG MPI library
+
+config DIMLIB
+	bool
+	help
+	  Dynamic Interrupt Moderation library.
+	  Implements an algorithm for dynamically changing CQ moderation values
+	  according to run time performance.
+
+#
+# libfdt files, only selected if needed.
+#
+config LIBFDT
+	bool
+
+config OID_REGISTRY
+	tristate
+	help
+	  Enable fast lookup object identifier registry.
+
+config UCS2_STRING
+	tristate
+
+#
+# generic vdso
+#
+source "lib/vdso/Kconfig"
+
+source "lib/fonts/Kconfig"
+
+config SG_SPLIT
+	def_bool n
+	help
+	 Provides a helper to split scatterlists into chunks, each chunk being
+	 a scatterlist. This should be selected by a driver or an API which
+	 whishes to split a scatterlist amongst multiple DMA channels.
+
+config SG_POOL
+	def_bool n
+	help
+	 Provides a helper to allocate chained scatterlists. This should be
+	 selected by a driver or an API which whishes to allocate chained
+	 scatterlist.
+
+#
+# sg chaining option
+#
+
+config ARCH_NO_SG_CHAIN
+	def_bool n
+
+config ARCH_HAS_PMEM_API
+	bool
+
+config MEMREGION
+	bool
+
+config ARCH_HAS_MEMREMAP_COMPAT_ALIGN
+	bool
+
+# use memcpy to implement user copies for nommu architectures
+config UACCESS_MEMCPY
+	bool
+
+config ARCH_HAS_UACCESS_FLUSHCACHE
+	bool
+
+# arch has a concept of a recoverable synchronous exception due to a
+# memory-read error like x86 machine-check or ARM data-abort, and
+# implements copy_mc_to_{user,kernel} to abort and report
+# 'bytes-transferred' if that exception fires when accessing the source
+# buffer.
+config ARCH_HAS_COPY_MC
+	bool
+
+# Temporary. Goes away when all archs are cleaned up
+config ARCH_STACKWALK
+       bool
+
+config STACKDEPOT
+	bool
+	select STACKTRACE
+
+config STACKDEPOT_ALWAYS_INIT
+	bool
+	select STACKDEPOT
+
+config REF_TRACKER
+	bool
+	depends on STACKTRACE_SUPPORT
+	select STACKDEPOT
+
+config SBITMAP
+	bool
+
+config PARMAN
+	tristate "parman" if COMPILE_TEST
+
+config OBJAGG
+	tristate "objagg" if COMPILE_TEST
+
+endmenu
+
+config GENERIC_IOREMAP
+	bool
+
+config GENERIC_LIB_ASHLDI3
+	bool
+
+config GENERIC_LIB_ASHRDI3
+	bool
+
+config GENERIC_LIB_LSHRDI3
+	bool
+
+config GENERIC_LIB_MULDI3
+	bool
+
+config GENERIC_LIB_CMPDI2
+	bool
+
+config GENERIC_LIB_UCMPDI2
+	bool
+
+config GENERIC_LIB_DEVMEM_IS_ALLOWED
+	bool
+
+config PLDMFW
+	bool
+	default n
+
+config ASN1_ENCODER
+       tristate
+
+config POLYNOMIAL
+       tristate