Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 7444 insertions, 0 deletions

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
new file mode 100644
index 000000000..c07645c99
--- /dev/null
+++ b/net/mac80211/mlme.c
@@ -0,0 +1,7444 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BSS client mode implementation
+ * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
+ * Copyright 2004, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 - 2022 Intel Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/fips.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/rtnetlink.h>
+#include <linux/crc32.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+
+#include "ieee80211_i.h"
+#include "driver-ops.h"
+#include "rate.h"
+#include "led.h"
+#include "fils_aead.h"
+
+#define IEEE80211_AUTH_TIMEOUT		(HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_LONG	(HZ / 2)
+#define IEEE80211_AUTH_TIMEOUT_SHORT	(HZ / 10)
+#define IEEE80211_AUTH_TIMEOUT_SAE	(HZ * 2)
+#define IEEE80211_AUTH_MAX_TRIES	3
+#define IEEE80211_AUTH_WAIT_ASSOC	(HZ * 5)
+#define IEEE80211_AUTH_WAIT_SAE_RETRY	(HZ * 2)
+#define IEEE80211_ASSOC_TIMEOUT		(HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_LONG	(HZ / 2)
+#define IEEE80211_ASSOC_TIMEOUT_SHORT	(HZ / 10)
+#define IEEE80211_ASSOC_MAX_TRIES	3
+
+static int max_nullfunc_tries = 2;
+module_param(max_nullfunc_tries, int, 0644);
+MODULE_PARM_DESC(max_nullfunc_tries,
+		 "Maximum nullfunc tx tries before disconnecting (reason 4).");
+
+static int max_probe_tries = 5;
+module_param(max_probe_tries, int, 0644);
+MODULE_PARM_DESC(max_probe_tries,
+		 "Maximum probe tries before disconnecting (reason 4).");
+
+/*
+ * Beacon loss timeout is calculated as N frames times the
+ * advertised beacon interval.  This may need to be somewhat
+ * higher than what hardware might detect to account for
+ * delays in the host processing frames. But since we also
+ * probe on beacon miss before declaring the connection lost
+ * default to what we want.
+ */
+static int beacon_loss_count = 7;
+module_param(beacon_loss_count, int, 0644);
+MODULE_PARM_DESC(beacon_loss_count,
+		 "Number of beacon intervals before we decide beacon was lost.");
+
+/*
+ * Time the connection can be idle before we probe
+ * it to see if we can still talk to the AP.
+ */
+#define IEEE80211_CONNECTION_IDLE_TIME	(30 * HZ)
+/*
+ * Time we wait for a probe response after sending
+ * a probe request because of beacon loss or for
+ * checking the connection still works.
+ */
+static int probe_wait_ms = 500;
+module_param(probe_wait_ms, int, 0644);
+MODULE_PARM_DESC(probe_wait_ms,
+		 "Maximum time(ms) to wait for probe response"
+		 " before disconnecting (reason 4).");
+
+/*
+ * How many Beacon frames need to have been used in average signal strength
+ * before starting to indicate signal change events.
+ */
+#define IEEE80211_SIGNAL_AVE_MIN_COUNT	4
+
+/*
+ * We can have multiple work items (and connection probing)
+ * scheduling this timer, but we need to take care to only
+ * reschedule it when it should fire _earlier_ than it was
+ * asked for before, or if it's not pending right now. This
+ * function ensures that. Note that it then is required to
+ * run this function for all timeouts after the first one
+ * has happened -- the work that runs from this timer will
+ * do that.
+ */
+static void run_again(struct ieee80211_sub_if_data *sdata,
+		      unsigned long timeout)
+{
+	sdata_assert_lock(sdata);
+
+	if (!timer_pending(&sdata->u.mgd.timer) ||
+	    time_before(timeout, sdata->u.mgd.timer.expires))
+		mod_timer(&sdata->u.mgd.timer, timeout);
+}
+
+void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
+{
+	if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
+		return;
+
+	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
+		return;
+
+	mod_timer(&sdata->u.mgd.bcn_mon_timer,
+		  round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
+}
+
+void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (unlikely(!ifmgd->associated))
+		return;
+
+	if (ifmgd->probe_send_count)
+		ifmgd->probe_send_count = 0;
+
+	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
+		return;
+
+	mod_timer(&ifmgd->conn_mon_timer,
+		  round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
+}
+
+static int ecw2cw(int ecw)
+{
+	return (1 << ecw) - 1;
+}
+
+static ieee80211_conn_flags_t
+ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
+			     struct ieee80211_link_data *link,
+			     ieee80211_conn_flags_t conn_flags,
+			     struct ieee80211_supported_band *sband,
+			     struct ieee80211_channel *channel,
+			     u32 vht_cap_info,
+			     const struct ieee80211_ht_operation *ht_oper,
+			     const struct ieee80211_vht_operation *vht_oper,
+			     const struct ieee80211_he_operation *he_oper,
+			     const struct ieee80211_eht_operation *eht_oper,
+			     const struct ieee80211_s1g_oper_ie *s1g_oper,
+			     struct cfg80211_chan_def *chandef, bool tracking)
+{
+	struct cfg80211_chan_def vht_chandef;
+	struct ieee80211_sta_ht_cap sta_ht_cap;
+	ieee80211_conn_flags_t ret;
+	u32 ht_cfreq;
+
+	memset(chandef, 0, sizeof(struct cfg80211_chan_def));
+	chandef->chan = channel;
+	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+	chandef->center_freq1 = channel->center_freq;
+	chandef->freq1_offset = channel->freq_offset;
+
+	if (channel->band == NL80211_BAND_6GHZ) {
+		if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, eht_oper,
+						    chandef)) {
+			mlme_dbg(sdata,
+				 "bad 6 GHz operation, disabling HT/VHT/HE/EHT\n");
+			ret = IEEE80211_CONN_DISABLE_HT |
+			      IEEE80211_CONN_DISABLE_VHT |
+			      IEEE80211_CONN_DISABLE_HE |
+			      IEEE80211_CONN_DISABLE_EHT;
+		} else {
+			ret = 0;
+		}
+		vht_chandef = *chandef;
+		goto out;
+	} else if (sband->band == NL80211_BAND_S1GHZ) {
+		if (!ieee80211_chandef_s1g_oper(s1g_oper, chandef)) {
+			sdata_info(sdata,
+				   "Missing S1G Operation Element? Trying operating == primary\n");
+			chandef->width = ieee80211_s1g_channel_width(channel);
+		}
+
+		ret = IEEE80211_CONN_DISABLE_HT | IEEE80211_CONN_DISABLE_40MHZ |
+		      IEEE80211_CONN_DISABLE_VHT |
+		      IEEE80211_CONN_DISABLE_80P80MHZ |
+		      IEEE80211_CONN_DISABLE_160MHZ;
+		goto out;
+	}
+
+	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
+	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
+
+	if (!ht_oper || !sta_ht_cap.ht_supported) {
+		mlme_dbg(sdata, "HT operation missing / HT not supported\n");
+		ret = IEEE80211_CONN_DISABLE_HT |
+		      IEEE80211_CONN_DISABLE_VHT |
+		      IEEE80211_CONN_DISABLE_HE |
+		      IEEE80211_CONN_DISABLE_EHT;
+		goto out;
+	}
+
+	chandef->width = NL80211_CHAN_WIDTH_20;
+
+	ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
+						  channel->band);
+	/* check that channel matches the right operating channel */
+	if (!tracking && channel->center_freq != ht_cfreq) {
+		/*
+		 * It's possible that some APs are confused here;
+		 * Netgear WNDR3700 sometimes reports 4 higher than
+		 * the actual channel in association responses, but
+		 * since we look at probe response/beacon data here
+		 * it should be OK.
+		 */
+		sdata_info(sdata,
+			   "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+			   channel->center_freq, ht_cfreq,
+			   ht_oper->primary_chan, channel->band);
+		ret = IEEE80211_CONN_DISABLE_HT |
+		      IEEE80211_CONN_DISABLE_VHT |
+		      IEEE80211_CONN_DISABLE_HE |
+		      IEEE80211_CONN_DISABLE_EHT;
+		goto out;
+	}
+
+	/* check 40 MHz support, if we have it */
+	if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+		ieee80211_chandef_ht_oper(ht_oper, chandef);
+	} else {
+		mlme_dbg(sdata, "40 MHz not supported\n");
+		/* 40 MHz (and 80 MHz) must be supported for VHT */
+		ret = IEEE80211_CONN_DISABLE_VHT;
+		/* also mark 40 MHz disabled */
+		ret |= IEEE80211_CONN_DISABLE_40MHZ;
+		goto out;
+	}
+
+	if (!vht_oper || !sband->vht_cap.vht_supported) {
+		mlme_dbg(sdata, "VHT operation missing / VHT not supported\n");
+		ret = IEEE80211_CONN_DISABLE_VHT;
+		goto out;
+	}
+
+	vht_chandef = *chandef;
+	if (!(conn_flags & IEEE80211_CONN_DISABLE_HE) &&
+	    he_oper &&
+	    (le32_to_cpu(he_oper->he_oper_params) &
+	     IEEE80211_HE_OPERATION_VHT_OPER_INFO)) {
+		struct ieee80211_vht_operation he_oper_vht_cap;
+
+		/*
+		 * Set only first 3 bytes (other 2 aren't used in
+		 * ieee80211_chandef_vht_oper() anyway)
+		 */
+		memcpy(&he_oper_vht_cap, he_oper->optional, 3);
+		he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0);
+
+		if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
+						&he_oper_vht_cap, ht_oper,
+						&vht_chandef)) {
+			if (!(conn_flags & IEEE80211_CONN_DISABLE_HE))
+				sdata_info(sdata,
+					   "HE AP VHT information is invalid, disabling HE\n");
+			ret = IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT;
+			goto out;
+		}
+	} else if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
+					       vht_cap_info,
+					       vht_oper, ht_oper,
+					       &vht_chandef)) {
+		if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
+			sdata_info(sdata,
+				   "AP VHT information is invalid, disabling VHT\n");
+		ret = IEEE80211_CONN_DISABLE_VHT;
+		goto out;
+	}
+
+	if (!cfg80211_chandef_valid(&vht_chandef)) {
+		if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
+			sdata_info(sdata,
+				   "AP VHT information is invalid, disabling VHT\n");
+		ret = IEEE80211_CONN_DISABLE_VHT;
+		goto out;
+	}
+
+	if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
+		ret = 0;
+		goto out;
+	}
+
+	if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
+		if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
+			sdata_info(sdata,
+				   "AP VHT information doesn't match HT, disabling VHT\n");
+		ret = IEEE80211_CONN_DISABLE_VHT;
+		goto out;
+	}
+
+	*chandef = vht_chandef;
+
+	/*
+	 * handle the case that the EHT operation indicates that it holds EHT
+	 * operation information (in case that the channel width differs from
+	 * the channel width reported in HT/VHT/HE).
+	 */
+	if (eht_oper && (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT)) {
+		struct cfg80211_chan_def eht_chandef = *chandef;
+
+		ieee80211_chandef_eht_oper(eht_oper,
+					   eht_chandef.width ==
+					   NL80211_CHAN_WIDTH_160,
+					   false, &eht_chandef);
+
+		if (!cfg80211_chandef_valid(&eht_chandef)) {
+			if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT))
+				sdata_info(sdata,
+					   "AP EHT information is invalid, disabling EHT\n");
+			ret = IEEE80211_CONN_DISABLE_EHT;
+			goto out;
+		}
+
+		if (!cfg80211_chandef_compatible(chandef, &eht_chandef)) {
+			if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT))
+				sdata_info(sdata,
+					   "AP EHT information is incompatible, disabling EHT\n");
+			ret = IEEE80211_CONN_DISABLE_EHT;
+			goto out;
+		}
+
+		*chandef = eht_chandef;
+	}
+
+	ret = 0;
+
+out:
+	/*
+	 * When tracking the current AP, don't do any further checks if the
+	 * new chandef is identical to the one we're currently using for the
+	 * connection. This keeps us from playing ping-pong with regulatory,
+	 * without it the following can happen (for example):
+	 *  - connect to an AP with 80 MHz, world regdom allows 80 MHz
+	 *  - AP advertises regdom US
+	 *  - CRDA loads regdom US with 80 MHz prohibited (old database)
+	 *  - the code below detects an unsupported channel, downgrades, and
+	 *    we disconnect from the AP in the caller
+	 *  - disconnect causes CRDA to reload world regdomain and the game
+	 *    starts anew.
+	 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
+	 *
+	 * It seems possible that there are still scenarios with CSA or real
+	 * bandwidth changes where a this could happen, but those cases are
+	 * less common and wouldn't completely prevent using the AP.
+	 */
+	if (tracking &&
+	    cfg80211_chandef_identical(chandef, &link->conf->chandef))
+		return ret;
+
+	/* don't print the message below for VHT mismatch if VHT is disabled */
+	if (ret & IEEE80211_CONN_DISABLE_VHT)
+		vht_chandef = *chandef;
+
+	/*
+	 * Ignore the DISABLED flag when we're already connected and only
+	 * tracking the APs beacon for bandwidth changes - otherwise we
+	 * might get disconnected here if we connect to an AP, update our
+	 * regulatory information based on the AP's country IE and the
+	 * information we have is wrong/outdated and disables the channel
+	 * that we're actually using for the connection to the AP.
+	 */
+	while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
+					tracking ? 0 :
+						   IEEE80211_CHAN_DISABLED)) {
+		if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
+			ret = IEEE80211_CONN_DISABLE_HT |
+			      IEEE80211_CONN_DISABLE_VHT |
+			      IEEE80211_CONN_DISABLE_HE |
+			      IEEE80211_CONN_DISABLE_EHT;
+			break;
+		}
+
+		ret |= ieee80211_chandef_downgrade(chandef);
+	}
+
+	if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
+						 IEEE80211_CHAN_NO_HE))
+		ret |= IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT;
+
+	if (!eht_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
+						  IEEE80211_CHAN_NO_EHT))
+		ret |= IEEE80211_CONN_DISABLE_EHT;
+
+	if (chandef->width != vht_chandef.width && !tracking)
+		sdata_info(sdata,
+			   "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
+
+	WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
+	return ret;
+}
+
+static int ieee80211_config_bw(struct ieee80211_link_data *link,
+			       const struct ieee80211_ht_cap *ht_cap,
+			       const struct ieee80211_vht_cap *vht_cap,
+			       const struct ieee80211_ht_operation *ht_oper,
+			       const struct ieee80211_vht_operation *vht_oper,
+			       const struct ieee80211_he_operation *he_oper,
+			       const struct ieee80211_eht_operation *eht_oper,
+			       const struct ieee80211_s1g_oper_ie *s1g_oper,
+			       const u8 *bssid, u32 *changed)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_channel *chan = link->conf->chandef.chan;
+	struct ieee80211_supported_band *sband =
+		local->hw.wiphy->bands[chan->band];
+	struct cfg80211_chan_def chandef;
+	u16 ht_opmode;
+	ieee80211_conn_flags_t flags;
+	u32 vht_cap_info = 0;
+	int ret;
+
+	/* if HT was/is disabled, don't track any bandwidth changes */
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT || !ht_oper)
+		return 0;
+
+	/* don't check VHT if we associated as non-VHT station */
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)
+		vht_oper = NULL;
+
+	/* don't check HE if we associated as non-HE station */
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE ||
+	    !ieee80211_get_he_iftype_cap(sband,
+					 ieee80211_vif_type_p2p(&sdata->vif))) {
+		he_oper = NULL;
+		eht_oper = NULL;
+	}
+
+	/* don't check EHT if we associated as non-EHT station */
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT ||
+	    !ieee80211_get_eht_iftype_cap(sband,
+					 ieee80211_vif_type_p2p(&sdata->vif)))
+		eht_oper = NULL;
+
+	/*
+	 * if bss configuration changed store the new one -
+	 * this may be applicable even if channel is identical
+	 */
+	ht_opmode = le16_to_cpu(ht_oper->operation_mode);
+	if (link->conf->ht_operation_mode != ht_opmode) {
+		*changed |= BSS_CHANGED_HT;
+		link->conf->ht_operation_mode = ht_opmode;
+	}
+
+	if (vht_cap)
+		vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info);
+
+	/* calculate new channel (type) based on HT/VHT/HE operation IEs */
+	flags = ieee80211_determine_chantype(sdata, link,
+					     link->u.mgd.conn_flags,
+					     sband, chan, vht_cap_info,
+					     ht_oper, vht_oper,
+					     he_oper, eht_oper,
+					     s1g_oper, &chandef, true);
+
+	/*
+	 * Downgrade the new channel if we associated with restricted
+	 * capabilities. For example, if we associated as a 20 MHz STA
+	 * to a 40 MHz AP (due to regulatory, capabilities or config
+	 * reasons) then switching to a 40 MHz channel now won't do us
+	 * any good -- we couldn't use it with the AP.
+	 */
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ &&
+	    chandef.width == NL80211_CHAN_WIDTH_80P80)
+		flags |= ieee80211_chandef_downgrade(&chandef);
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_160MHZ &&
+	    chandef.width == NL80211_CHAN_WIDTH_160)
+		flags |= ieee80211_chandef_downgrade(&chandef);
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_40MHZ &&
+	    chandef.width > NL80211_CHAN_WIDTH_20)
+		flags |= ieee80211_chandef_downgrade(&chandef);
+
+	if (cfg80211_chandef_identical(&chandef, &link->conf->chandef))
+		return 0;
+
+	link_info(link,
+		  "AP %pM changed bandwidth, new config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n",
+		  link->u.mgd.bssid, chandef.chan->center_freq,
+		  chandef.chan->freq_offset, chandef.width,
+		  chandef.center_freq1, chandef.freq1_offset,
+		  chandef.center_freq2);
+
+	if (flags != (link->u.mgd.conn_flags &
+				(IEEE80211_CONN_DISABLE_HT |
+				 IEEE80211_CONN_DISABLE_VHT |
+				 IEEE80211_CONN_DISABLE_HE |
+				 IEEE80211_CONN_DISABLE_EHT |
+				 IEEE80211_CONN_DISABLE_40MHZ |
+				 IEEE80211_CONN_DISABLE_80P80MHZ |
+				 IEEE80211_CONN_DISABLE_160MHZ |
+				 IEEE80211_CONN_DISABLE_320MHZ)) ||
+	    !cfg80211_chandef_valid(&chandef)) {
+		sdata_info(sdata,
+			   "AP %pM changed caps/bw in a way we can't support (0x%x/0x%x) - disconnect\n",
+			   link->u.mgd.bssid, flags, ifmgd->flags);
+		return -EINVAL;
+	}
+
+	ret = ieee80211_link_change_bandwidth(link, &chandef, changed);
+
+	if (ret) {
+		sdata_info(sdata,
+			   "AP %pM changed bandwidth to incompatible one - disconnect\n",
+			   link->u.mgd.bssid);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* frame sending functions */
+
+static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
+				struct sk_buff *skb, u8 ap_ht_param,
+				struct ieee80211_supported_band *sband,
+				struct ieee80211_channel *channel,
+				enum ieee80211_smps_mode smps,
+				ieee80211_conn_flags_t conn_flags)
+{
+	u8 *pos;
+	u32 flags = channel->flags;
+	u16 cap;
+	struct ieee80211_sta_ht_cap ht_cap;
+
+	BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
+
+	memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
+	ieee80211_apply_htcap_overrides(sdata, &ht_cap);
+
+	/* determine capability flags */
+	cap = ht_cap.cap;
+
+	switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+		if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
+			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+			cap &= ~IEEE80211_HT_CAP_SGI_40;
+		}
+		break;
+	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+		if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
+			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+			cap &= ~IEEE80211_HT_CAP_SGI_40;
+		}
+		break;
+	}
+
+	/*
+	 * If 40 MHz was disabled associate as though we weren't
+	 * capable of 40 MHz -- some broken APs will never fall
+	 * back to trying to transmit in 20 MHz.
+	 */
+	if (conn_flags & IEEE80211_CONN_DISABLE_40MHZ) {
+		cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+		cap &= ~IEEE80211_HT_CAP_SGI_40;
+	}
+
+	/* set SM PS mode properly */
+	cap &= ~IEEE80211_HT_CAP_SM_PS;
+	switch (smps) {
+	case IEEE80211_SMPS_AUTOMATIC:
+	case IEEE80211_SMPS_NUM_MODES:
+		WARN_ON(1);
+		fallthrough;
+	case IEEE80211_SMPS_OFF:
+		cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
+		break;
+	case IEEE80211_SMPS_STATIC:
+		cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
+		break;
+	case IEEE80211_SMPS_DYNAMIC:
+		cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
+		break;
+	}
+
+	/* reserve and fill IE */
+	pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
+	ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
+}
+
+/* This function determines vht capability flags for the association
+ * and builds the IE.
+ * Note - the function returns true to own the MU-MIMO capability
+ */
+static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb,
+				 struct ieee80211_supported_band *sband,
+				 struct ieee80211_vht_cap *ap_vht_cap,
+				 ieee80211_conn_flags_t conn_flags)
+{
+	struct ieee80211_local *local = sdata->local;
+	u8 *pos;
+	u32 cap;
+	struct ieee80211_sta_vht_cap vht_cap;
+	u32 mask, ap_bf_sts, our_bf_sts;
+	bool mu_mimo_owner = false;
+
+	BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
+
+	memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
+	ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
+
+	/* determine capability flags */
+	cap = vht_cap.cap;
+
+	if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ) {
+		u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
+
+		cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
+		if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
+		    bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
+			cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+	}
+
+	if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ) {
+		cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
+		cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
+	}
+
+	/*
+	 * Some APs apparently get confused if our capabilities are better
+	 * than theirs, so restrict what we advertise in the assoc request.
+	 */
+	if (!(ap_vht_cap->vht_cap_info &
+			cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
+		cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+			 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+	else if (!(ap_vht_cap->vht_cap_info &
+			cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
+		cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
+
+	/*
+	 * If some other vif is using the MU-MIMO capability we cannot associate
+	 * using MU-MIMO - this will lead to contradictions in the group-id
+	 * mechanism.
+	 * Ownership is defined since association request, in order to avoid
+	 * simultaneous associations with MU-MIMO.
+	 */
+	if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
+		bool disable_mu_mimo = false;
+		struct ieee80211_sub_if_data *other;
+
+		list_for_each_entry_rcu(other, &local->interfaces, list) {
+			if (other->vif.bss_conf.mu_mimo_owner) {
+				disable_mu_mimo = true;
+				break;
+			}
+		}
+		if (disable_mu_mimo)
+			cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
+		else
+			mu_mimo_owner = true;
+	}
+
+	mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
+
+	ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
+	our_bf_sts = cap & mask;
+
+	if (ap_bf_sts < our_bf_sts) {
+		cap &= ~mask;
+		cap |= ap_bf_sts;
+	}
+
+	/* reserve and fill IE */
+	pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
+	ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
+
+	return mu_mimo_owner;
+}
+
+/* This function determines HE capability flags for the association
+ * and builds the IE.
+ */
+static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
+				struct sk_buff *skb,
+				struct ieee80211_supported_band *sband,
+				enum ieee80211_smps_mode smps_mode,
+				ieee80211_conn_flags_t conn_flags)
+{
+	u8 *pos, *pre_he_pos;
+	const struct ieee80211_sta_he_cap *he_cap;
+	u8 he_cap_size;
+
+	he_cap = ieee80211_get_he_iftype_cap(sband,
+					     ieee80211_vif_type_p2p(&sdata->vif));
+	if (WARN_ON(!he_cap))
+		return;
+
+	/* get a max size estimate */
+	he_cap_size =
+		2 + 1 + sizeof(he_cap->he_cap_elem) +
+		ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
+		ieee80211_he_ppe_size(he_cap->ppe_thres[0],
+				      he_cap->he_cap_elem.phy_cap_info);
+	pos = skb_put(skb, he_cap_size);
+	pre_he_pos = pos;
+	pos = ieee80211_ie_build_he_cap(conn_flags,
+					pos, he_cap, pos + he_cap_size);
+	/* trim excess if any */
+	skb_trim(skb, skb->len - (pre_he_pos + he_cap_size - pos));
+
+	ieee80211_ie_build_he_6ghz_cap(sdata, smps_mode, skb);
+}
+
+static void ieee80211_add_eht_ie(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb,
+				 struct ieee80211_supported_band *sband)
+{
+	u8 *pos;
+	const struct ieee80211_sta_he_cap *he_cap;
+	const struct ieee80211_sta_eht_cap *eht_cap;
+	u8 eht_cap_size;
+
+	he_cap = ieee80211_get_he_iftype_cap(sband,
+					     ieee80211_vif_type_p2p(&sdata->vif));
+	eht_cap = ieee80211_get_eht_iftype_cap(sband,
+					       ieee80211_vif_type_p2p(&sdata->vif));
+
+	/*
+	 * EHT capabilities element is only added if the HE capabilities element
+	 * was added so assume that 'he_cap' is valid and don't check it.
+	 */
+	if (WARN_ON(!he_cap || !eht_cap))
+		return;
+
+	eht_cap_size =
+		2 + 1 + sizeof(eht_cap->eht_cap_elem) +
+		ieee80211_eht_mcs_nss_size(&he_cap->he_cap_elem,
+					   &eht_cap->eht_cap_elem,
+					   false) +
+		ieee80211_eht_ppe_size(eht_cap->eht_ppe_thres[0],
+				       eht_cap->eht_cap_elem.phy_cap_info);
+	pos = skb_put(skb, eht_cap_size);
+	ieee80211_ie_build_eht_cap(pos, he_cap, eht_cap, pos + eht_cap_size,
+				   false);
+}
+
+static void ieee80211_assoc_add_rates(struct sk_buff *skb,
+				      enum nl80211_chan_width width,
+				      struct ieee80211_supported_band *sband,
+				      struct ieee80211_mgd_assoc_data *assoc_data)
+{
+	unsigned int shift = ieee80211_chanwidth_get_shift(width);
+	unsigned int rates_len, supp_rates_len;
+	u32 rates = 0;
+	int i, count;
+	u8 *pos;
+
+	if (assoc_data->supp_rates_len) {
+		/*
+		 * Get all rates supported by the device and the AP as
+		 * some APs don't like getting a superset of their rates
+		 * in the association request (e.g. D-Link DAP 1353 in
+		 * b-only mode)...
+		 */
+		rates_len = ieee80211_parse_bitrates(width, sband,
+						     assoc_data->supp_rates,
+						     assoc_data->supp_rates_len,
+						     &rates);
+	} else {
+		/*
+		 * In case AP not provide any supported rates information
+		 * before association, we send information element(s) with
+		 * all rates that we support.
+		 */
+		rates_len = sband->n_bitrates;
+		for (i = 0; i < sband->n_bitrates; i++)
+			rates |= BIT(i);
+	}
+
+	supp_rates_len = rates_len;
+	if (supp_rates_len > 8)
+		supp_rates_len = 8;
+
+	pos = skb_put(skb, supp_rates_len + 2);
+	*pos++ = WLAN_EID_SUPP_RATES;
+	*pos++ = supp_rates_len;
+
+	count = 0;
+	for (i = 0; i < sband->n_bitrates; i++) {
+		if (BIT(i) & rates) {
+			int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
+						5 * (1 << shift));
+			*pos++ = (u8)rate;
+			if (++count == 8)
+				break;
+		}
+	}
+
+	if (rates_len > count) {
+		pos = skb_put(skb, rates_len - count + 2);
+		*pos++ = WLAN_EID_EXT_SUPP_RATES;
+		*pos++ = rates_len - count;
+
+		for (i++; i < sband->n_bitrates; i++) {
+			if (BIT(i) & rates) {
+				int rate;
+
+				rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
+						    5 * (1 << shift));
+				*pos++ = (u8)rate;
+			}
+		}
+	}
+}
+
+static size_t ieee80211_add_before_ht_elems(struct sk_buff *skb,
+					    const u8 *elems,
+					    size_t elems_len,
+					    size_t offset)
+{
+	size_t noffset;
+
+	static const u8 before_ht[] = {
+		WLAN_EID_SSID,
+		WLAN_EID_SUPP_RATES,
+		WLAN_EID_EXT_SUPP_RATES,
+		WLAN_EID_PWR_CAPABILITY,
+		WLAN_EID_SUPPORTED_CHANNELS,
+		WLAN_EID_RSN,
+		WLAN_EID_QOS_CAPA,
+		WLAN_EID_RRM_ENABLED_CAPABILITIES,
+		WLAN_EID_MOBILITY_DOMAIN,
+		WLAN_EID_FAST_BSS_TRANSITION,	/* reassoc only */
+		WLAN_EID_RIC_DATA,		/* reassoc only */
+		WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
+	};
+	static const u8 after_ric[] = {
+		WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
+		WLAN_EID_HT_CAPABILITY,
+		WLAN_EID_BSS_COEX_2040,
+		/* luckily this is almost always there */
+		WLAN_EID_EXT_CAPABILITY,
+		WLAN_EID_QOS_TRAFFIC_CAPA,
+		WLAN_EID_TIM_BCAST_REQ,
+		WLAN_EID_INTERWORKING,
+		/* 60 GHz (Multi-band, DMG, MMS) can't happen */
+		WLAN_EID_VHT_CAPABILITY,
+		WLAN_EID_OPMODE_NOTIF,
+	};
+
+	if (!elems_len)
+		return offset;
+
+	noffset = ieee80211_ie_split_ric(elems, elems_len,
+					 before_ht,
+					 ARRAY_SIZE(before_ht),
+					 after_ric,
+					 ARRAY_SIZE(after_ric),
+					 offset);
+	skb_put_data(skb, elems + offset, noffset - offset);
+
+	return noffset;
+}
+
+static size_t ieee80211_add_before_vht_elems(struct sk_buff *skb,
+					     const u8 *elems,
+					     size_t elems_len,
+					     size_t offset)
+{
+	static const u8 before_vht[] = {
+		/*
+		 * no need to list the ones split off before HT
+		 * or generated here
+		 */
+		WLAN_EID_BSS_COEX_2040,
+		WLAN_EID_EXT_CAPABILITY,
+		WLAN_EID_QOS_TRAFFIC_CAPA,
+		WLAN_EID_TIM_BCAST_REQ,
+		WLAN_EID_INTERWORKING,
+		/* 60 GHz (Multi-band, DMG, MMS) can't happen */
+	};
+	size_t noffset;
+
+	if (!elems_len)
+		return offset;
+
+	/* RIC already taken care of in ieee80211_add_before_ht_elems() */
+	noffset = ieee80211_ie_split(elems, elems_len,
+				     before_vht, ARRAY_SIZE(before_vht),
+				     offset);
+	skb_put_data(skb, elems + offset, noffset - offset);
+
+	return noffset;
+}
+
+static size_t ieee80211_add_before_he_elems(struct sk_buff *skb,
+					    const u8 *elems,
+					    size_t elems_len,
+					    size_t offset)
+{
+	static const u8 before_he[] = {
+		/*
+		 * no need to list the ones split off before VHT
+		 * or generated here
+		 */
+		WLAN_EID_OPMODE_NOTIF,
+		WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE,
+		/* 11ai elements */
+		WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION,
+		WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY,
+		WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM,
+		WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER,
+		WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN,
+		/* TODO: add 11ah/11aj/11ak elements */
+	};
+	size_t noffset;
+
+	if (!elems_len)
+		return offset;
+
+	/* RIC already taken care of in ieee80211_add_before_ht_elems() */
+	noffset = ieee80211_ie_split(elems, elems_len,
+				     before_he, ARRAY_SIZE(before_he),
+				     offset);
+	skb_put_data(skb, elems + offset, noffset - offset);
+
+	return noffset;
+}
+
+#define PRESENT_ELEMS_MAX	8
+#define PRESENT_ELEM_EXT_OFFS	0x100
+
+static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata,
+					struct sk_buff *skb, u16 capab,
+					const struct element *ext_capa,
+					const u16 *present_elems);
+
+static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata,
+					 struct sk_buff *skb, u16 *capab,
+					 const struct element *ext_capa,
+					 const u8 *extra_elems,
+					 size_t extra_elems_len,
+					 unsigned int link_id,
+					 struct ieee80211_link_data *link,
+					 u16 *present_elems)
+{
+	enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
+	struct ieee80211_channel *chan = cbss->channel;
+	const struct ieee80211_sband_iftype_data *iftd;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_supported_band *sband;
+	enum nl80211_chan_width width = NL80211_CHAN_WIDTH_20;
+	struct ieee80211_chanctx_conf *chanctx_conf;
+	enum ieee80211_smps_mode smps_mode;
+	u16 orig_capab = *capab;
+	size_t offset = 0;
+	int present_elems_len = 0;
+	u8 *pos;
+	int i;
+
+#define ADD_PRESENT_ELEM(id) do {					\
+	/* need a last for termination - we use 0 == SSID */		\
+	if (!WARN_ON(present_elems_len >= PRESENT_ELEMS_MAX - 1))	\
+		present_elems[present_elems_len++] = (id);		\
+} while (0)
+#define ADD_PRESENT_EXT_ELEM(id) ADD_PRESENT_ELEM(PRESENT_ELEM_EXT_OFFS | (id))
+
+	if (link)
+		smps_mode = link->smps_mode;
+	else if (sdata->u.mgd.powersave)
+		smps_mode = IEEE80211_SMPS_DYNAMIC;
+	else
+		smps_mode = IEEE80211_SMPS_OFF;
+
+	if (link) {
+		/*
+		 * 5/10 MHz scenarios are only viable without MLO, in which
+		 * case this pointer should be used ... All of this is a bit
+		 * unclear though, not sure this even works at all.
+		 */
+		rcu_read_lock();
+		chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
+		if (chanctx_conf)
+			width = chanctx_conf->def.width;
+		rcu_read_unlock();
+	}
+
+	sband = local->hw.wiphy->bands[chan->band];
+	iftd = ieee80211_get_sband_iftype_data(sband, iftype);
+
+	if (sband->band == NL80211_BAND_2GHZ) {
+		*capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
+		*capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
+	}
+
+	if ((cbss->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
+	    ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
+		*capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
+
+	if (sband->band != NL80211_BAND_S1GHZ)
+		ieee80211_assoc_add_rates(skb, width, sband, assoc_data);
+
+	if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
+	    *capab & WLAN_CAPABILITY_RADIO_MEASURE) {
+		struct cfg80211_chan_def chandef = {
+			.width = width,
+			.chan = chan,
+		};
+
+		pos = skb_put(skb, 4);
+		*pos++ = WLAN_EID_PWR_CAPABILITY;
+		*pos++ = 2;
+		*pos++ = 0; /* min tx power */
+		 /* max tx power */
+		*pos++ = ieee80211_chandef_max_power(&chandef);
+		ADD_PRESENT_ELEM(WLAN_EID_PWR_CAPABILITY);
+	}
+
+	/*
+	 * Per spec, we shouldn't include the list of channels if we advertise
+	 * support for extended channel switching, but we've always done that;
+	 * (for now?) apply this restriction only on the (new) 6 GHz band.
+	 */
+	if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT &&
+	    (sband->band != NL80211_BAND_6GHZ ||
+	     !ext_capa || ext_capa->datalen < 1 ||
+	     !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) {
+		/* TODO: get this in reg domain format */
+		pos = skb_put(skb, 2 * sband->n_channels + 2);
+		*pos++ = WLAN_EID_SUPPORTED_CHANNELS;
+		*pos++ = 2 * sband->n_channels;
+		for (i = 0; i < sband->n_channels; i++) {
+			int cf = sband->channels[i].center_freq;
+
+			*pos++ = ieee80211_frequency_to_channel(cf);
+			*pos++ = 1; /* one channel in the subband*/
+		}
+		ADD_PRESENT_ELEM(WLAN_EID_SUPPORTED_CHANNELS);
+	}
+
+	/* if present, add any custom IEs that go before HT */
+	offset = ieee80211_add_before_ht_elems(skb, extra_elems,
+					       extra_elems_len,
+					       offset);
+
+	if (sband->band != NL80211_BAND_6GHZ &&
+	    !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT)) {
+		ieee80211_add_ht_ie(sdata, skb,
+				    assoc_data->link[link_id].ap_ht_param,
+				    sband, chan, smps_mode,
+				    assoc_data->link[link_id].conn_flags);
+		ADD_PRESENT_ELEM(WLAN_EID_HT_CAPABILITY);
+	}
+
+	/* if present, add any custom IEs that go before VHT */
+	offset = ieee80211_add_before_vht_elems(skb, extra_elems,
+						extra_elems_len,
+						offset);
+
+	if (sband->band != NL80211_BAND_6GHZ &&
+	    !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
+		bool mu_mimo_owner =
+			ieee80211_add_vht_ie(sdata, skb, sband,
+					     &assoc_data->link[link_id].ap_vht_cap,
+					     assoc_data->link[link_id].conn_flags);
+
+		if (link)
+			link->conf->mu_mimo_owner = mu_mimo_owner;
+		ADD_PRESENT_ELEM(WLAN_EID_VHT_CAPABILITY);
+	}
+
+	/*
+	 * If AP doesn't support HT, mark HE and EHT as disabled.
+	 * If on the 5GHz band, make sure it supports VHT.
+	 */
+	if (assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT ||
+	    (sband->band == NL80211_BAND_5GHZ &&
+	     assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT))
+		assoc_data->link[link_id].conn_flags |=
+			IEEE80211_CONN_DISABLE_HE |
+			IEEE80211_CONN_DISABLE_EHT;
+
+	/* if present, add any custom IEs that go before HE */
+	offset = ieee80211_add_before_he_elems(skb, extra_elems,
+					       extra_elems_len,
+					       offset);
+
+	if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HE)) {
+		ieee80211_add_he_ie(sdata, skb, sband, smps_mode,
+				    assoc_data->link[link_id].conn_flags);
+		ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_HE_CAPABILITY);
+	}
+
+	/*
+	 * careful - need to know about all the present elems before
+	 * calling ieee80211_assoc_add_ml_elem(), so add this one if
+	 * we're going to put it after the ML element
+	 */
+	if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT))
+		ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_EHT_CAPABILITY);
+
+	if (link_id == assoc_data->assoc_link_id)
+		ieee80211_assoc_add_ml_elem(sdata, skb, orig_capab, ext_capa,
+					    present_elems);
+
+	/* crash if somebody gets it wrong */
+	present_elems = NULL;
+
+	if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT))
+		ieee80211_add_eht_ie(sdata, skb, sband);
+
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		ieee80211_add_aid_request_ie(sdata, skb);
+		ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap, skb);
+	}
+
+	if (iftd && iftd->vendor_elems.data && iftd->vendor_elems.len)
+		skb_put_data(skb, iftd->vendor_elems.data, iftd->vendor_elems.len);
+
+	if (link)
+		link->u.mgd.conn_flags = assoc_data->link[link_id].conn_flags;
+
+	return offset;
+}
+
+static void ieee80211_add_non_inheritance_elem(struct sk_buff *skb,
+					       const u16 *outer,
+					       const u16 *inner)
+{
+	unsigned int skb_len = skb->len;
+	bool at_extension = false;
+	bool added = false;
+	int i, j;
+	u8 *len, *list_len = NULL;
+
+	skb_put_u8(skb, WLAN_EID_EXTENSION);
+	len = skb_put(skb, 1);
+	skb_put_u8(skb, WLAN_EID_EXT_NON_INHERITANCE);
+
+	for (i = 0; i < PRESENT_ELEMS_MAX && outer[i]; i++) {
+		u16 elem = outer[i];
+		bool have_inner = false;
+
+		/* should at least be sorted in the sense of normal -> ext */
+		WARN_ON(at_extension && elem < PRESENT_ELEM_EXT_OFFS);
+
+		/* switch to extension list */
+		if (!at_extension && elem >= PRESENT_ELEM_EXT_OFFS) {
+			at_extension = true;
+			if (!list_len)
+				skb_put_u8(skb, 0);
+			list_len = NULL;
+		}
+
+		for (j = 0; j < PRESENT_ELEMS_MAX && inner[j]; j++) {
+			if (elem == inner[j]) {
+				have_inner = true;
+				break;
+			}
+		}
+
+		if (have_inner)
+			continue;
+
+		if (!list_len) {
+			list_len = skb_put(skb, 1);
+			*list_len = 0;
+		}
+		*list_len += 1;
+		skb_put_u8(skb, (u8)elem);
+		added = true;
+	}
+
+	/* if we added a list but no extension list, make a zero-len one */
+	if (added && (!at_extension || !list_len))
+		skb_put_u8(skb, 0);
+
+	/* if nothing added remove extension element completely */
+	if (!added)
+		skb_trim(skb, skb_len);
+	else
+		*len = skb->len - skb_len - 2;
+}
+
+static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata,
+					struct sk_buff *skb, u16 capab,
+					const struct element *ext_capa,
+					const u16 *outer_present_elems)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	struct ieee80211_multi_link_elem *ml_elem;
+	struct ieee80211_mle_basic_common_info *common;
+	const struct wiphy_iftype_ext_capab *ift_ext_capa;
+	__le16 eml_capa = 0, mld_capa_ops = 0;
+	unsigned int link_id;
+	u8 *ml_elem_len;
+	void *capab_pos;
+
+	if (!sdata->vif.valid_links)
+		return;
+
+	ift_ext_capa = cfg80211_get_iftype_ext_capa(local->hw.wiphy,
+						    ieee80211_vif_type_p2p(&sdata->vif));
+	if (ift_ext_capa) {
+		eml_capa = cpu_to_le16(ift_ext_capa->eml_capabilities);
+		mld_capa_ops = cpu_to_le16(ift_ext_capa->mld_capa_and_ops);
+	}
+
+	skb_put_u8(skb, WLAN_EID_EXTENSION);
+	ml_elem_len = skb_put(skb, 1);
+	skb_put_u8(skb, WLAN_EID_EXT_EHT_MULTI_LINK);
+	ml_elem = skb_put(skb, sizeof(*ml_elem));
+	ml_elem->control =
+		cpu_to_le16(IEEE80211_ML_CONTROL_TYPE_BASIC |
+			    IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP);
+	common = skb_put(skb, sizeof(*common));
+	common->len = sizeof(*common) +
+		      2;  /* MLD capa/ops */
+	memcpy(common->mld_mac_addr, sdata->vif.addr, ETH_ALEN);
+
+	/* add EML_CAPA only if needed, see Draft P802.11be_D2.1, 35.3.17 */
+	if (eml_capa &
+	    cpu_to_le16((IEEE80211_EML_CAP_EMLSR_SUPP |
+			 IEEE80211_EML_CAP_EMLMR_SUPPORT))) {
+		common->len += 2; /* EML capabilities */
+		ml_elem->control |=
+			cpu_to_le16(IEEE80211_MLC_BASIC_PRES_EML_CAPA);
+		skb_put_data(skb, &eml_capa, sizeof(eml_capa));
+	}
+	/* need indication from userspace to support this */
+	mld_capa_ops &= ~cpu_to_le16(IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP);
+	skb_put_data(skb, &mld_capa_ops, sizeof(mld_capa_ops));
+
+	for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+		u16 link_present_elems[PRESENT_ELEMS_MAX] = {};
+		const u8 *extra_elems;
+		size_t extra_elems_len;
+		size_t extra_used;
+		u8 *subelem_len = NULL;
+		__le16 ctrl;
+
+		if (!assoc_data->link[link_id].bss ||
+		    link_id == assoc_data->assoc_link_id)
+			continue;
+
+		extra_elems = assoc_data->link[link_id].elems;
+		extra_elems_len = assoc_data->link[link_id].elems_len;
+
+		skb_put_u8(skb, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE);
+		subelem_len = skb_put(skb, 1);
+
+		ctrl = cpu_to_le16(link_id |
+				   IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE |
+				   IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT);
+		skb_put_data(skb, &ctrl, sizeof(ctrl));
+		skb_put_u8(skb, 1 + ETH_ALEN); /* STA Info Length */
+		skb_put_data(skb, assoc_data->link[link_id].addr,
+			     ETH_ALEN);
+		/*
+		 * Now add the contents of the (re)association request,
+		 * but the "listen interval" and "current AP address"
+		 * (if applicable) are skipped. So we only have
+		 * the capability field (remember the position and fill
+		 * later), followed by the elements added below by
+		 * calling ieee80211_assoc_link_elems().
+		 */
+		capab_pos = skb_put(skb, 2);
+
+		extra_used = ieee80211_assoc_link_elems(sdata, skb, &capab,
+							ext_capa,
+							extra_elems,
+							extra_elems_len,
+							link_id, NULL,
+							link_present_elems);
+		if (extra_elems)
+			skb_put_data(skb, extra_elems + extra_used,
+				     extra_elems_len - extra_used);
+
+		put_unaligned_le16(capab, capab_pos);
+
+		ieee80211_add_non_inheritance_elem(skb, outer_present_elems,
+						   link_present_elems);
+
+		ieee80211_fragment_element(skb, subelem_len);
+	}
+
+	ieee80211_fragment_element(skb, ml_elem_len);
+}
+
+static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	struct ieee80211_link_data *link;
+	struct sk_buff *skb;
+	struct ieee80211_mgmt *mgmt;
+	u8 *pos, qos_info, *ie_start;
+	size_t offset, noffset;
+	u16 capab = WLAN_CAPABILITY_ESS, link_capab;
+	__le16 listen_int;
+	struct element *ext_capa = NULL;
+	enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
+	struct ieee80211_prep_tx_info info = {};
+	unsigned int link_id, n_links = 0;
+	u16 present_elems[PRESENT_ELEMS_MAX] = {};
+	void *capab_pos;
+	size_t size;
+	int ret;
+
+	/* we know it's writable, cast away the const */
+	if (assoc_data->ie_len)
+		ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
+						      assoc_data->ie,
+						      assoc_data->ie_len);
+
+	sdata_assert_lock(sdata);
+
+	size = local->hw.extra_tx_headroom +
+	       sizeof(*mgmt) + /* bit too much but doesn't matter */
+	       2 + assoc_data->ssid_len + /* SSID */
+	       assoc_data->ie_len + /* extra IEs */
+	       (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
+	       9; /* WMM */
+
+	for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+		struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
+		const struct ieee80211_sband_iftype_data *iftd;
+		struct ieee80211_supported_band *sband;
+
+		if (!cbss)
+			continue;
+
+		sband = local->hw.wiphy->bands[cbss->channel->band];
+
+		n_links++;
+		/* add STA profile elements length */
+		size += assoc_data->link[link_id].elems_len;
+		/* and supported rates length */
+		size += 4 + sband->n_bitrates;
+		/* supported channels */
+		size += 2 + 2 * sband->n_channels;
+
+		iftd = ieee80211_get_sband_iftype_data(sband, iftype);
+		if (iftd)
+			size += iftd->vendor_elems.len;
+
+		/* power capability */
+		size += 4;
+
+		/* HT, VHT, HE, EHT */
+		size += 2 + sizeof(struct ieee80211_ht_cap);
+		size += 2 + sizeof(struct ieee80211_vht_cap);
+		size += 2 + 1 + sizeof(struct ieee80211_he_cap_elem) +
+			sizeof(struct ieee80211_he_mcs_nss_supp) +
+			IEEE80211_HE_PPE_THRES_MAX_LEN;
+
+		if (sband->band == NL80211_BAND_6GHZ)
+			size += 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa);
+
+		size += 2 + 1 + sizeof(struct ieee80211_eht_cap_elem) +
+			sizeof(struct ieee80211_eht_mcs_nss_supp) +
+			IEEE80211_EHT_PPE_THRES_MAX_LEN;
+
+		/* non-inheritance element */
+		size += 2 + 2 + PRESENT_ELEMS_MAX;
+
+		/* should be the same across all BSSes */
+		if (cbss->capability & WLAN_CAPABILITY_PRIVACY)
+			capab |= WLAN_CAPABILITY_PRIVACY;
+	}
+
+	if (sdata->vif.valid_links) {
+		/* consider the multi-link element with STA profile */
+		size += sizeof(struct ieee80211_multi_link_elem);
+		/* max common info field in basic multi-link element */
+		size += sizeof(struct ieee80211_mle_basic_common_info) +
+			2 + /* capa & op */
+			2; /* EML capa */
+
+		/*
+		 * The capability elements were already considered above;
+		 * note this over-estimates a bit because there's no
+		 * STA profile for the assoc link.
+		 */
+		size += (n_links - 1) *
+			(1 + 1 + /* subelement ID/length */
+			 2 + /* STA control */
+			 1 + ETH_ALEN + 2 /* STA Info field */);
+	}
+
+	link = sdata_dereference(sdata->link[assoc_data->assoc_link_id], sdata);
+	if (WARN_ON(!link))
+		return -EINVAL;
+
+	if (WARN_ON(!assoc_data->link[assoc_data->assoc_link_id].bss))
+		return -EINVAL;
+
+	skb = alloc_skb(size, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
+		capab |= WLAN_CAPABILITY_RADIO_MEASURE;
+
+	/* Set MBSSID support for HE AP if needed */
+	if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) &&
+	    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
+	    ext_capa && ext_capa->datalen >= 3)
+		ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
+
+	mgmt = skb_put_zero(skb, 24);
+	memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN);
+	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
+	memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN);
+
+	listen_int = cpu_to_le16(assoc_data->s1g ?
+			ieee80211_encode_usf(local->hw.conf.listen_interval) :
+			local->hw.conf.listen_interval);
+	if (!is_zero_ether_addr(assoc_data->prev_ap_addr)) {
+		skb_put(skb, 10);
+		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+						  IEEE80211_STYPE_REASSOC_REQ);
+		capab_pos = &mgmt->u.reassoc_req.capab_info;
+		mgmt->u.reassoc_req.listen_interval = listen_int;
+		memcpy(mgmt->u.reassoc_req.current_ap,
+		       assoc_data->prev_ap_addr, ETH_ALEN);
+		info.subtype = IEEE80211_STYPE_REASSOC_REQ;
+	} else {
+		skb_put(skb, 4);
+		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+						  IEEE80211_STYPE_ASSOC_REQ);
+		capab_pos = &mgmt->u.assoc_req.capab_info;
+		mgmt->u.assoc_req.listen_interval = listen_int;
+		info.subtype = IEEE80211_STYPE_ASSOC_REQ;
+	}
+
+	/* SSID */
+	pos = skb_put(skb, 2 + assoc_data->ssid_len);
+	ie_start = pos;
+	*pos++ = WLAN_EID_SSID;
+	*pos++ = assoc_data->ssid_len;
+	memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
+
+	/* add the elements for the assoc (main) link */
+	link_capab = capab;
+	offset = ieee80211_assoc_link_elems(sdata, skb, &link_capab,
+					    ext_capa,
+					    assoc_data->ie,
+					    assoc_data->ie_len,
+					    assoc_data->assoc_link_id, link,
+					    present_elems);
+	put_unaligned_le16(link_capab, capab_pos);
+
+	/* if present, add any custom non-vendor IEs */
+	if (assoc_data->ie_len) {
+		noffset = ieee80211_ie_split_vendor(assoc_data->ie,
+						    assoc_data->ie_len,
+						    offset);
+		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
+		offset = noffset;
+	}
+
+	if (assoc_data->wmm) {
+		if (assoc_data->uapsd) {
+			qos_info = ifmgd->uapsd_queues;
+			qos_info |= (ifmgd->uapsd_max_sp_len <<
+				     IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
+		} else {
+			qos_info = 0;
+		}
+
+		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
+	}
+
+	/* add any remaining custom (i.e. vendor specific here) IEs */
+	if (assoc_data->ie_len) {
+		noffset = assoc_data->ie_len;
+		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
+	}
+
+	if (assoc_data->fils_kek_len) {
+		ret = fils_encrypt_assoc_req(skb, assoc_data);
+		if (ret < 0) {
+			dev_kfree_skb(skb);
+			return ret;
+		}
+	}
+
+	pos = skb_tail_pointer(skb);
+	kfree(ifmgd->assoc_req_ies);
+	ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC);
+	if (!ifmgd->assoc_req_ies) {
+		dev_kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	ifmgd->assoc_req_ies_len = pos - ie_start;
+
+	drv_mgd_prepare_tx(local, sdata, &info);
+
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
+		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
+						IEEE80211_TX_INTFL_MLME_CONN_TX;
+	ieee80211_tx_skb(sdata, skb);
+
+	return 0;
+}
+
+void ieee80211_send_pspoll(struct ieee80211_local *local,
+			   struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_pspoll *pspoll;
+	struct sk_buff *skb;
+
+	skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
+	if (!skb)
+		return;
+
+	pspoll = (struct ieee80211_pspoll *) skb->data;
+	pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
+}
+
+void ieee80211_send_nullfunc(struct ieee80211_local *local,
+			     struct ieee80211_sub_if_data *sdata,
+			     bool powersave)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr_3addr *nullfunc;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, -1,
+				     !ieee80211_hw_check(&local->hw,
+							 DOESNT_SUPPORT_QOS_NDP));
+	if (!skb)
+		return;
+
+	nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
+	if (powersave)
+		nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
+					IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
+
+	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
+		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
+		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
+
+	ieee80211_tx_skb(sdata, skb);
+}
+
+void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
+				   struct ieee80211_sub_if_data *sdata)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr *nullfunc;
+	__le16 fc;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
+	if (!skb)
+		return;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	nullfunc = skb_put_zero(skb, 30);
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
+			 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
+	nullfunc->frame_control = fc;
+	memcpy(nullfunc->addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN);
+	memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
+	memcpy(nullfunc->addr3, sdata->deflink.u.mgd.bssid, ETH_ALEN);
+	memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
+
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
+	ieee80211_tx_skb(sdata, skb);
+}
+
+/* spectrum management related things */
+static void ieee80211_chswitch_work(struct work_struct *work)
+{
+	struct ieee80211_link_data *link =
+		container_of(work, struct ieee80211_link_data, u.mgd.chswitch_work);
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	int ret;
+
+	if (!ieee80211_sdata_running(sdata))
+		return;
+
+	sdata_lock(sdata);
+	mutex_lock(&local->mtx);
+	mutex_lock(&local->chanctx_mtx);
+
+	if (!ifmgd->associated)
+		goto out;
+
+	if (!link->conf->csa_active)
+		goto out;
+
+	/*
+	 * using reservation isn't immediate as it may be deferred until later
+	 * with multi-vif. once reservation is complete it will re-schedule the
+	 * work with no reserved_chanctx so verify chandef to check if it
+	 * completed successfully
+	 */
+
+	if (link->reserved_chanctx) {
+		/*
+		 * with multi-vif csa driver may call ieee80211_csa_finish()
+		 * many times while waiting for other interfaces to use their
+		 * reservations
+		 */
+		if (link->reserved_ready)
+			goto out;
+
+		ret = ieee80211_link_use_reserved_context(link);
+		if (ret) {
+			sdata_info(sdata,
+				   "failed to use reserved channel context, disconnecting (err=%d)\n",
+				   ret);
+			ieee80211_queue_work(&sdata->local->hw,
+					     &ifmgd->csa_connection_drop_work);
+			goto out;
+		}
+
+		goto out;
+	}
+
+	if (!cfg80211_chandef_identical(&link->conf->chandef,
+					&link->csa_chandef)) {
+		sdata_info(sdata,
+			   "failed to finalize channel switch, disconnecting\n");
+		ieee80211_queue_work(&sdata->local->hw,
+				     &ifmgd->csa_connection_drop_work);
+		goto out;
+	}
+
+	link->u.mgd.csa_waiting_bcn = true;
+
+	ieee80211_sta_reset_beacon_monitor(sdata);
+	ieee80211_sta_reset_conn_monitor(sdata);
+
+out:
+	mutex_unlock(&local->chanctx_mtx);
+	mutex_unlock(&local->mtx);
+	sdata_unlock(sdata);
+}
+
+static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	int ret;
+
+	sdata_assert_lock(sdata);
+
+	WARN_ON(!link->conf->csa_active);
+
+	if (link->csa_block_tx) {
+		ieee80211_wake_vif_queues(local, sdata,
+					  IEEE80211_QUEUE_STOP_REASON_CSA);
+		link->csa_block_tx = false;
+	}
+
+	link->conf->csa_active = false;
+	link->u.mgd.csa_waiting_bcn = false;
+	/*
+	 * If the CSA IE is still present on the beacon after the switch,
+	 * we need to consider it as a new CSA (possibly to self).
+	 */
+	link->u.mgd.beacon_crc_valid = false;
+
+	ret = drv_post_channel_switch(sdata);
+	if (ret) {
+		sdata_info(sdata,
+			   "driver post channel switch failed, disconnecting\n");
+		ieee80211_queue_work(&local->hw,
+				     &ifmgd->csa_connection_drop_work);
+		return;
+	}
+
+	cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, 0);
+}
+
+void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (WARN_ON(sdata->vif.valid_links))
+		success = false;
+
+	trace_api_chswitch_done(sdata, success);
+	if (!success) {
+		sdata_info(sdata,
+			   "driver channel switch failed, disconnecting\n");
+		ieee80211_queue_work(&sdata->local->hw,
+				     &ifmgd->csa_connection_drop_work);
+	} else {
+		ieee80211_queue_work(&sdata->local->hw,
+				     &sdata->deflink.u.mgd.chswitch_work);
+	}
+}
+EXPORT_SYMBOL(ieee80211_chswitch_done);
+
+static void ieee80211_chswitch_timer(struct timer_list *t)
+{
+	struct ieee80211_link_data *link =
+		from_timer(link, t, u.mgd.chswitch_timer);
+
+	ieee80211_queue_work(&link->sdata->local->hw,
+			     &link->u.mgd.chswitch_work);
+}
+
+static void
+ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+
+	if (!local->ops->abort_channel_switch)
+		return;
+
+	mutex_lock(&local->mtx);
+
+	mutex_lock(&local->chanctx_mtx);
+	ieee80211_link_unreserve_chanctx(link);
+	mutex_unlock(&local->chanctx_mtx);
+
+	if (link->csa_block_tx)
+		ieee80211_wake_vif_queues(local, sdata,
+					  IEEE80211_QUEUE_STOP_REASON_CSA);
+
+	link->csa_block_tx = false;
+	link->conf->csa_active = false;
+
+	mutex_unlock(&local->mtx);
+
+	drv_abort_channel_switch(sdata);
+}
+
+static void
+ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
+				 u64 timestamp, u32 device_timestamp,
+				 struct ieee802_11_elems *elems,
+				 bool beacon)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct cfg80211_bss *cbss = link->u.mgd.bss;
+	struct ieee80211_chanctx_conf *conf;
+	struct ieee80211_chanctx *chanctx;
+	enum nl80211_band current_band;
+	struct ieee80211_csa_ie csa_ie;
+	struct ieee80211_channel_switch ch_switch;
+	struct ieee80211_bss *bss;
+	int res;
+
+	sdata_assert_lock(sdata);
+
+	if (!cbss)
+		return;
+
+	if (local->scanning)
+		return;
+
+	current_band = cbss->channel->band;
+	bss = (void *)cbss->priv;
+	res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
+					   bss->vht_cap_info,
+					   link->u.mgd.conn_flags,
+					   link->u.mgd.bssid, &csa_ie);
+
+	if (!res) {
+		ch_switch.timestamp = timestamp;
+		ch_switch.device_timestamp = device_timestamp;
+		ch_switch.block_tx = csa_ie.mode;
+		ch_switch.chandef = csa_ie.chandef;
+		ch_switch.count = csa_ie.count;
+		ch_switch.delay = csa_ie.max_switch_time;
+	}
+
+	if (res < 0)
+		goto lock_and_drop_connection;
+
+	if (beacon && link->conf->csa_active &&
+	    !link->u.mgd.csa_waiting_bcn) {
+		if (res)
+			ieee80211_sta_abort_chanswitch(link);
+		else
+			drv_channel_switch_rx_beacon(sdata, &ch_switch);
+		return;
+	} else if (link->conf->csa_active || res) {
+		/* disregard subsequent announcements if already processing */
+		return;
+	}
+
+	if (link->conf->chandef.chan->band !=
+	    csa_ie.chandef.chan->band) {
+		sdata_info(sdata,
+			   "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+			   link->u.mgd.bssid,
+			   csa_ie.chandef.chan->center_freq,
+			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+			   csa_ie.chandef.center_freq2);
+		goto lock_and_drop_connection;
+	}
+
+	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
+				     IEEE80211_CHAN_DISABLED)) {
+		sdata_info(sdata,
+			   "AP %pM switches to unsupported channel "
+			   "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
+			   "disconnecting\n",
+			   link->u.mgd.bssid,
+			   csa_ie.chandef.chan->center_freq,
+			   csa_ie.chandef.chan->freq_offset,
+			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+			   csa_ie.chandef.freq1_offset,
+			   csa_ie.chandef.center_freq2);
+		goto lock_and_drop_connection;
+	}
+
+	if (cfg80211_chandef_identical(&csa_ie.chandef,
+				       &link->conf->chandef) &&
+	    (!csa_ie.mode || !beacon)) {
+		if (link->u.mgd.csa_ignored_same_chan)
+			return;
+		sdata_info(sdata,
+			   "AP %pM tries to chanswitch to same channel, ignore\n",
+			   link->u.mgd.bssid);
+		link->u.mgd.csa_ignored_same_chan = true;
+		return;
+	}
+
+	/*
+	 * Drop all TDLS peers - either we disconnect or move to a different
+	 * channel from this point on. There's no telling what our peer will do.
+	 * The TDLS WIDER_BW scenario is also problematic, as peers might now
+	 * have an incompatible wider chandef.
+	 */
+	ieee80211_teardown_tdls_peers(sdata);
+
+	mutex_lock(&local->mtx);
+	mutex_lock(&local->chanctx_mtx);
+	conf = rcu_dereference_protected(link->conf->chanctx_conf,
+					 lockdep_is_held(&local->chanctx_mtx));
+	if (!conf) {
+		sdata_info(sdata,
+			   "no channel context assigned to vif?, disconnecting\n");
+		goto drop_connection;
+	}
+
+	chanctx = container_of(conf, struct ieee80211_chanctx, conf);
+
+	if (local->use_chanctx &&
+	    !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
+		sdata_info(sdata,
+			   "driver doesn't support chan-switch with channel contexts\n");
+		goto drop_connection;
+	}
+
+	if (drv_pre_channel_switch(sdata, &ch_switch)) {
+		sdata_info(sdata,
+			   "preparing for channel switch failed, disconnecting\n");
+		goto drop_connection;
+	}
+
+	res = ieee80211_link_reserve_chanctx(link, &csa_ie.chandef,
+					     chanctx->mode, false);
+	if (res) {
+		sdata_info(sdata,
+			   "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
+			   res);
+		goto drop_connection;
+	}
+	mutex_unlock(&local->chanctx_mtx);
+
+	link->conf->csa_active = true;
+	link->csa_chandef = csa_ie.chandef;
+	link->csa_block_tx = csa_ie.mode;
+	link->u.mgd.csa_ignored_same_chan = false;
+	link->u.mgd.beacon_crc_valid = false;
+
+	if (link->csa_block_tx)
+		ieee80211_stop_vif_queues(local, sdata,
+					  IEEE80211_QUEUE_STOP_REASON_CSA);
+	mutex_unlock(&local->mtx);
+
+	cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, 0,
+					  csa_ie.count, csa_ie.mode);
+
+	if (local->ops->channel_switch) {
+		/* use driver's channel switch callback */
+		drv_channel_switch(local, sdata, &ch_switch);
+		return;
+	}
+
+	/* channel switch handled in software */
+	if (csa_ie.count <= 1)
+		ieee80211_queue_work(&local->hw, &link->u.mgd.chswitch_work);
+	else
+		mod_timer(&link->u.mgd.chswitch_timer,
+			  TU_TO_EXP_TIME((csa_ie.count - 1) *
+					 cbss->beacon_interval));
+	return;
+ lock_and_drop_connection:
+	mutex_lock(&local->mtx);
+	mutex_lock(&local->chanctx_mtx);
+ drop_connection:
+	/*
+	 * This is just so that the disconnect flow will know that
+	 * we were trying to switch channel and failed. In case the
+	 * mode is 1 (we are not allowed to Tx), we will know not to
+	 * send a deauthentication frame. Those two fields will be
+	 * reset when the disconnection worker runs.
+	 */
+	link->conf->csa_active = true;
+	link->csa_block_tx = csa_ie.mode;
+
+	ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
+	mutex_unlock(&local->chanctx_mtx);
+	mutex_unlock(&local->mtx);
+}
+
+static bool
+ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
+				 struct ieee80211_channel *channel,
+				 const u8 *country_ie, u8 country_ie_len,
+				 const u8 *pwr_constr_elem,
+				 int *chan_pwr, int *pwr_reduction)
+{
+	struct ieee80211_country_ie_triplet *triplet;
+	int chan = ieee80211_frequency_to_channel(channel->center_freq);
+	int i, chan_increment;
+	bool have_chan_pwr = false;
+
+	/* Invalid IE */
+	if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
+		return false;
+
+	triplet = (void *)(country_ie + 3);
+	country_ie_len -= 3;
+
+	switch (channel->band) {
+	default:
+		WARN_ON_ONCE(1);
+		fallthrough;
+	case NL80211_BAND_2GHZ:
+	case NL80211_BAND_60GHZ:
+	case NL80211_BAND_LC:
+		chan_increment = 1;
+		break;
+	case NL80211_BAND_5GHZ:
+		chan_increment = 4;
+		break;
+	case NL80211_BAND_6GHZ:
+		/*
+		 * In the 6 GHz band, the "maximum transmit power level"
+		 * field in the triplets is reserved, and thus will be
+		 * zero and we shouldn't use it to control TX power.
+		 * The actual TX power will be given in the transmit
+		 * power envelope element instead.
+		 */
+		return false;
+	}
+
+	/* find channel */
+	while (country_ie_len >= 3) {
+		u8 first_channel = triplet->chans.first_channel;
+
+		if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
+			goto next;
+
+		for (i = 0; i < triplet->chans.num_channels; i++) {
+			if (first_channel + i * chan_increment == chan) {
+				have_chan_pwr = true;
+				*chan_pwr = triplet->chans.max_power;
+				break;
+			}
+		}
+		if (have_chan_pwr)
+			break;
+
+ next:
+		triplet++;
+		country_ie_len -= 3;
+	}
+
+	if (have_chan_pwr && pwr_constr_elem)
+		*pwr_reduction = *pwr_constr_elem;
+	else
+		*pwr_reduction = 0;
+
+	return have_chan_pwr;
+}
+
+static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
+				      struct ieee80211_channel *channel,
+				      const u8 *cisco_dtpc_ie,
+				      int *pwr_level)
+{
+	/* From practical testing, the first data byte of the DTPC element
+	 * seems to contain the requested dBm level, and the CLI on Cisco
+	 * APs clearly state the range is -127 to 127 dBm, which indicates
+	 * a signed byte, although it seemingly never actually goes negative.
+	 * The other byte seems to always be zero.
+	 */
+	*pwr_level = (__s8)cisco_dtpc_ie[4];
+}
+
+static u32 ieee80211_handle_pwr_constr(struct ieee80211_link_data *link,
+				       struct ieee80211_channel *channel,
+				       struct ieee80211_mgmt *mgmt,
+				       const u8 *country_ie, u8 country_ie_len,
+				       const u8 *pwr_constr_ie,
+				       const u8 *cisco_dtpc_ie)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	bool has_80211h_pwr = false, has_cisco_pwr = false;
+	int chan_pwr = 0, pwr_reduction_80211h = 0;
+	int pwr_level_cisco, pwr_level_80211h;
+	int new_ap_level;
+	__le16 capab = mgmt->u.probe_resp.capab_info;
+
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control))
+		return 0;	/* TODO */
+
+	if (country_ie &&
+	    (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
+	     capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
+		has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
+			sdata, channel, country_ie, country_ie_len,
+			pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
+		pwr_level_80211h =
+			max_t(int, 0, chan_pwr - pwr_reduction_80211h);
+	}
+
+	if (cisco_dtpc_ie) {
+		ieee80211_find_cisco_dtpc(
+			sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
+		has_cisco_pwr = true;
+	}
+
+	if (!has_80211h_pwr && !has_cisco_pwr)
+		return 0;
+
+	/* If we have both 802.11h and Cisco DTPC, apply both limits
+	 * by picking the smallest of the two power levels advertised.
+	 */
+	if (has_80211h_pwr &&
+	    (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
+		new_ap_level = pwr_level_80211h;
+
+		if (link->ap_power_level == new_ap_level)
+			return 0;
+
+		sdata_dbg(sdata,
+			  "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
+			  pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
+			  link->u.mgd.bssid);
+	} else {  /* has_cisco_pwr is always true here. */
+		new_ap_level = pwr_level_cisco;
+
+		if (link->ap_power_level == new_ap_level)
+			return 0;
+
+		sdata_dbg(sdata,
+			  "Limiting TX power to %d dBm as advertised by %pM\n",
+			  pwr_level_cisco, link->u.mgd.bssid);
+	}
+
+	link->ap_power_level = new_ap_level;
+	if (__ieee80211_recalc_txpower(sdata))
+		return BSS_CHANGED_TXPOWER;
+	return 0;
+}
+
+/* powersave */
+static void ieee80211_enable_ps(struct ieee80211_local *local,
+				struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_conf *conf = &local->hw.conf;
+
+	/*
+	 * If we are scanning right now then the parameters will
+	 * take effect when scan finishes.
+	 */
+	if (local->scanning)
+		return;
+
+	if (conf->dynamic_ps_timeout > 0 &&
+	    !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
+		mod_timer(&local->dynamic_ps_timer, jiffies +
+			  msecs_to_jiffies(conf->dynamic_ps_timeout));
+	} else {
+		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
+			ieee80211_send_nullfunc(local, sdata, true);
+
+		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
+		    ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
+			return;
+
+		conf->flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+}
+
+static void ieee80211_change_ps(struct ieee80211_local *local)
+{
+	struct ieee80211_conf *conf = &local->hw.conf;
+
+	if (local->ps_sdata) {
+		ieee80211_enable_ps(local, local->ps_sdata);
+	} else if (conf->flags & IEEE80211_CONF_PS) {
+		conf->flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+		del_timer_sync(&local->dynamic_ps_timer);
+		cancel_work_sync(&local->dynamic_ps_enable_work);
+	}
+}
+
+static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *mgd = &sdata->u.mgd;
+	struct sta_info *sta = NULL;
+	bool authorized = false;
+
+	if (!mgd->powersave)
+		return false;
+
+	if (mgd->broken_ap)
+		return false;
+
+	if (!mgd->associated)
+		return false;
+
+	if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
+		return false;
+
+	if (!(local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) &&
+	    !sdata->deflink.u.mgd.have_beacon)
+		return false;
+
+	rcu_read_lock();
+	sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
+	if (sta)
+		authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
+	rcu_read_unlock();
+
+	return authorized;
+}
+
+/* need to hold RTNL or interface lock */
+void ieee80211_recalc_ps(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata, *found = NULL;
+	int count = 0;
+	int timeout;
+
+	if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS) ||
+	    ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
+		local->ps_sdata = NULL;
+		return;
+	}
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		if (sdata->vif.type == NL80211_IFTYPE_AP) {
+			/* If an AP vif is found, then disable PS
+			 * by setting the count to zero thereby setting
+			 * ps_sdata to NULL.
+			 */
+			count = 0;
+			break;
+		}
+		if (sdata->vif.type != NL80211_IFTYPE_STATION)
+			continue;
+		found = sdata;
+		count++;
+	}
+
+	if (count == 1 && ieee80211_powersave_allowed(found)) {
+		u8 dtimper = found->deflink.u.mgd.dtim_period;
+
+		timeout = local->dynamic_ps_forced_timeout;
+		if (timeout < 0)
+			timeout = 100;
+		local->hw.conf.dynamic_ps_timeout = timeout;
+
+		/* If the TIM IE is invalid, pretend the value is 1 */
+		if (!dtimper)
+			dtimper = 1;
+
+		local->hw.conf.ps_dtim_period = dtimper;
+		local->ps_sdata = found;
+	} else {
+		local->ps_sdata = NULL;
+	}
+
+	ieee80211_change_ps(local);
+}
+
+void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
+{
+	bool ps_allowed = ieee80211_powersave_allowed(sdata);
+
+	if (sdata->vif.cfg.ps != ps_allowed) {
+		sdata->vif.cfg.ps = ps_allowed;
+		ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_PS);
+	}
+}
+
+void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_disable_work);
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+
+	ieee80211_wake_queues_by_reason(&local->hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_PS,
+					false);
+}
+
+void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_enable_work);
+	struct ieee80211_sub_if_data *sdata = local->ps_sdata;
+	struct ieee80211_if_managed *ifmgd;
+	unsigned long flags;
+	int q;
+
+	/* can only happen when PS was just disabled anyway */
+	if (!sdata)
+		return;
+
+	ifmgd = &sdata->u.mgd;
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS)
+		return;
+
+	if (local->hw.conf.dynamic_ps_timeout > 0) {
+		/* don't enter PS if TX frames are pending */
+		if (drv_tx_frames_pending(local)) {
+			mod_timer(&local->dynamic_ps_timer, jiffies +
+				  msecs_to_jiffies(
+				  local->hw.conf.dynamic_ps_timeout));
+			return;
+		}
+
+		/*
+		 * transmission can be stopped by others which leads to
+		 * dynamic_ps_timer expiry. Postpone the ps timer if it
+		 * is not the actual idle state.
+		 */
+		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+		for (q = 0; q < local->hw.queues; q++) {
+			if (local->queue_stop_reasons[q]) {
+				spin_unlock_irqrestore(&local->queue_stop_reason_lock,
+						       flags);
+				mod_timer(&local->dynamic_ps_timer, jiffies +
+					  msecs_to_jiffies(
+					  local->hw.conf.dynamic_ps_timeout));
+				return;
+			}
+		}
+		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+	}
+
+	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
+	    !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
+		if (drv_tx_frames_pending(local)) {
+			mod_timer(&local->dynamic_ps_timer, jiffies +
+				  msecs_to_jiffies(
+				  local->hw.conf.dynamic_ps_timeout));
+		} else {
+			ieee80211_send_nullfunc(local, sdata, true);
+			/* Flush to get the tx status of nullfunc frame */
+			ieee80211_flush_queues(local, sdata, false);
+		}
+	}
+
+	if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
+	      ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
+	    (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
+		ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
+		local->hw.conf.flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+}
+
+void ieee80211_dynamic_ps_timer(struct timer_list *t)
+{
+	struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
+
+	ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
+}
+
+void ieee80211_dfs_cac_timer_work(struct work_struct *work)
+{
+	struct delayed_work *delayed_work = to_delayed_work(work);
+	struct ieee80211_link_data *link =
+		container_of(delayed_work, struct ieee80211_link_data,
+			     dfs_cac_timer_work);
+	struct cfg80211_chan_def chandef = link->conf->chandef;
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+
+	mutex_lock(&sdata->local->mtx);
+	if (sdata->wdev.cac_started) {
+		ieee80211_link_release_channel(link);
+		cfg80211_cac_event(sdata->dev, &chandef,
+				   NL80211_RADAR_CAC_FINISHED,
+				   GFP_KERNEL);
+	}
+	mutex_unlock(&sdata->local->mtx);
+}
+
+static bool
+__ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	bool ret = false;
+	int ac;
+
+	if (local->hw.queues < IEEE80211_NUM_ACS)
+		return false;
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
+		int non_acm_ac;
+		unsigned long now = jiffies;
+
+		if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
+		    tx_tspec->admitted_time &&
+		    time_after(now, tx_tspec->time_slice_start + HZ)) {
+			tx_tspec->consumed_tx_time = 0;
+			tx_tspec->time_slice_start = now;
+
+			if (tx_tspec->downgraded)
+				tx_tspec->action =
+					TX_TSPEC_ACTION_STOP_DOWNGRADE;
+		}
+
+		switch (tx_tspec->action) {
+		case TX_TSPEC_ACTION_STOP_DOWNGRADE:
+			/* take the original parameters */
+			if (drv_conf_tx(local, &sdata->deflink, ac,
+					&sdata->deflink.tx_conf[ac]))
+				link_err(&sdata->deflink,
+					 "failed to set TX queue parameters for queue %d\n",
+					 ac);
+			tx_tspec->action = TX_TSPEC_ACTION_NONE;
+			tx_tspec->downgraded = false;
+			ret = true;
+			break;
+		case TX_TSPEC_ACTION_DOWNGRADE:
+			if (time_after(now, tx_tspec->time_slice_start + HZ)) {
+				tx_tspec->action = TX_TSPEC_ACTION_NONE;
+				ret = true;
+				break;
+			}
+			/* downgrade next lower non-ACM AC */
+			for (non_acm_ac = ac + 1;
+			     non_acm_ac < IEEE80211_NUM_ACS;
+			     non_acm_ac++)
+				if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
+					break;
+			/* Usually the loop will result in using BK even if it
+			 * requires admission control, but such a configuration
+			 * makes no sense and we have to transmit somehow - the
+			 * AC selection does the same thing.
+			 * If we started out trying to downgrade from BK, then
+			 * the extra condition here might be needed.
+			 */
+			if (non_acm_ac >= IEEE80211_NUM_ACS)
+				non_acm_ac = IEEE80211_AC_BK;
+			if (drv_conf_tx(local, &sdata->deflink, ac,
+					&sdata->deflink.tx_conf[non_acm_ac]))
+				link_err(&sdata->deflink,
+					 "failed to set TX queue parameters for queue %d\n",
+					 ac);
+			tx_tspec->action = TX_TSPEC_ACTION_NONE;
+			ret = true;
+			schedule_delayed_work(&ifmgd->tx_tspec_wk,
+				tx_tspec->time_slice_start + HZ - now + 1);
+			break;
+		case TX_TSPEC_ACTION_NONE:
+			/* nothing now */
+			break;
+		}
+	}
+
+	return ret;
+}
+
+void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
+{
+	if (__ieee80211_sta_handle_tspec_ac_params(sdata))
+		ieee80211_link_info_change_notify(sdata, &sdata->deflink,
+						  BSS_CHANGED_QOS);
+}
+
+static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	sdata = container_of(work, struct ieee80211_sub_if_data,
+			     u.mgd.tx_tspec_wk.work);
+	ieee80211_sta_handle_tspec_ac_params(sdata);
+}
+
+void ieee80211_mgd_set_link_qos_params(struct ieee80211_link_data *link)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_tx_queue_params *params = link->tx_conf;
+	u8 ac;
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		mlme_dbg(sdata,
+			 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
+			 ac, params[ac].acm,
+			 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
+			 params[ac].txop, params[ac].uapsd,
+			 ifmgd->tx_tspec[ac].downgraded);
+		if (!ifmgd->tx_tspec[ac].downgraded &&
+		    drv_conf_tx(local, link, ac, &params[ac]))
+			link_err(link,
+				 "failed to set TX queue parameters for AC %d\n",
+				 ac);
+	}
+}
+
+/* MLME */
+static bool
+ieee80211_sta_wmm_params(struct ieee80211_local *local,
+			 struct ieee80211_link_data *link,
+			 const u8 *wmm_param, size_t wmm_param_len,
+			 const struct ieee80211_mu_edca_param_set *mu_edca)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	size_t left;
+	int count, mu_edca_count, ac;
+	const u8 *pos;
+	u8 uapsd_queues = 0;
+
+	if (!local->ops->conf_tx)
+		return false;
+
+	if (local->hw.queues < IEEE80211_NUM_ACS)
+		return false;
+
+	if (!wmm_param)
+		return false;
+
+	if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
+		return false;
+
+	if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
+		uapsd_queues = ifmgd->uapsd_queues;
+
+	count = wmm_param[6] & 0x0f;
+	/* -1 is the initial value of ifmgd->mu_edca_last_param_set.
+	 * if mu_edca was preset before and now it disappeared tell
+	 * the driver about it.
+	 */
+	mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1;
+	if (count == link->u.mgd.wmm_last_param_set &&
+	    mu_edca_count == link->u.mgd.mu_edca_last_param_set)
+		return false;
+	link->u.mgd.wmm_last_param_set = count;
+	link->u.mgd.mu_edca_last_param_set = mu_edca_count;
+
+	pos = wmm_param + 8;
+	left = wmm_param_len - 8;
+
+	memset(&params, 0, sizeof(params));
+
+	sdata->wmm_acm = 0;
+	for (; left >= 4; left -= 4, pos += 4) {
+		int aci = (pos[0] >> 5) & 0x03;
+		int acm = (pos[0] >> 4) & 0x01;
+		bool uapsd = false;
+
+		switch (aci) {
+		case 1: /* AC_BK */
+			ac = IEEE80211_AC_BK;
+			if (acm)
+				sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+				uapsd = true;
+			params[ac].mu_edca = !!mu_edca;
+			if (mu_edca)
+				params[ac].mu_edca_param_rec = mu_edca->ac_bk;
+			break;
+		case 2: /* AC_VI */
+			ac = IEEE80211_AC_VI;
+			if (acm)
+				sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+				uapsd = true;
+			params[ac].mu_edca = !!mu_edca;
+			if (mu_edca)
+				params[ac].mu_edca_param_rec = mu_edca->ac_vi;
+			break;
+		case 3: /* AC_VO */
+			ac = IEEE80211_AC_VO;
+			if (acm)
+				sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+				uapsd = true;
+			params[ac].mu_edca = !!mu_edca;
+			if (mu_edca)
+				params[ac].mu_edca_param_rec = mu_edca->ac_vo;
+			break;
+		case 0: /* AC_BE */
+		default:
+			ac = IEEE80211_AC_BE;
+			if (acm)
+				sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+				uapsd = true;
+			params[ac].mu_edca = !!mu_edca;
+			if (mu_edca)
+				params[ac].mu_edca_param_rec = mu_edca->ac_be;
+			break;
+		}
+
+		params[ac].aifs = pos[0] & 0x0f;
+
+		if (params[ac].aifs < 2) {
+			sdata_info(sdata,
+				   "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
+				   params[ac].aifs, aci);
+			params[ac].aifs = 2;
+		}
+		params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
+		params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
+		params[ac].txop = get_unaligned_le16(pos + 2);
+		params[ac].acm = acm;
+		params[ac].uapsd = uapsd;
+
+		if (params[ac].cw_min == 0 ||
+		    params[ac].cw_min > params[ac].cw_max) {
+			sdata_info(sdata,
+				   "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
+				   params[ac].cw_min, params[ac].cw_max, aci);
+			return false;
+		}
+		ieee80211_regulatory_limit_wmm_params(sdata, &params[ac], ac);
+	}
+
+	/* WMM specification requires all 4 ACIs. */
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		if (params[ac].cw_min == 0) {
+			sdata_info(sdata,
+				   "AP has invalid WMM params (missing AC %d), using defaults\n",
+				   ac);
+			return false;
+		}
+	}
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+		link->tx_conf[ac] = params[ac];
+
+	ieee80211_mgd_set_link_qos_params(link);
+
+	/* enable WMM or activate new settings */
+	link->conf->qos = true;
+	return true;
+}
+
+static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+	lockdep_assert_held(&sdata->local->mtx);
+
+	sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
+	ieee80211_run_deferred_scan(sdata->local);
+}
+
+static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+	mutex_lock(&sdata->local->mtx);
+	__ieee80211_stop_poll(sdata);
+	mutex_unlock(&sdata->local->mtx);
+}
+
+static u32 ieee80211_handle_bss_capability(struct ieee80211_link_data *link,
+					   u16 capab, bool erp_valid, u8 erp)
+{
+	struct ieee80211_bss_conf *bss_conf = link->conf;
+	struct ieee80211_supported_band *sband;
+	u32 changed = 0;
+	bool use_protection;
+	bool use_short_preamble;
+	bool use_short_slot;
+
+	sband = ieee80211_get_link_sband(link);
+	if (!sband)
+		return changed;
+
+	if (erp_valid) {
+		use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
+		use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
+	} else {
+		use_protection = false;
+		use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
+	}
+
+	use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
+	if (sband->band == NL80211_BAND_5GHZ ||
+	    sband->band == NL80211_BAND_6GHZ)
+		use_short_slot = true;
+
+	if (use_protection != bss_conf->use_cts_prot) {
+		bss_conf->use_cts_prot = use_protection;
+		changed |= BSS_CHANGED_ERP_CTS_PROT;
+	}
+
+	if (use_short_preamble != bss_conf->use_short_preamble) {
+		bss_conf->use_short_preamble = use_short_preamble;
+		changed |= BSS_CHANGED_ERP_PREAMBLE;
+	}
+
+	if (use_short_slot != bss_conf->use_short_slot) {
+		bss_conf->use_short_slot = use_short_slot;
+		changed |= BSS_CHANGED_ERP_SLOT;
+	}
+
+	return changed;
+}
+
+static u32 ieee80211_link_set_associated(struct ieee80211_link_data *link,
+					 struct cfg80211_bss *cbss)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_bss_conf *bss_conf = link->conf;
+	struct ieee80211_bss *bss = (void *)cbss->priv;
+	u32 changed = BSS_CHANGED_QOS;
+
+	/* not really used in MLO */
+	sdata->u.mgd.beacon_timeout =
+		usecs_to_jiffies(ieee80211_tu_to_usec(beacon_loss_count *
+						      bss_conf->beacon_int));
+
+	changed |= ieee80211_handle_bss_capability(link,
+						   bss_conf->assoc_capability,
+						   bss->has_erp_value,
+						   bss->erp_value);
+
+	ieee80211_check_rate_mask(link);
+
+	link->u.mgd.bss = cbss;
+	memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN);
+
+	if (sdata->vif.p2p ||
+	    sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
+		const struct cfg80211_bss_ies *ies;
+
+		rcu_read_lock();
+		ies = rcu_dereference(cbss->ies);
+		if (ies) {
+			int ret;
+
+			ret = cfg80211_get_p2p_attr(
+					ies->data, ies->len,
+					IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
+					(u8 *) &bss_conf->p2p_noa_attr,
+					sizeof(bss_conf->p2p_noa_attr));
+			if (ret >= 2) {
+				link->u.mgd.p2p_noa_index =
+					bss_conf->p2p_noa_attr.index;
+				changed |= BSS_CHANGED_P2P_PS;
+			}
+		}
+		rcu_read_unlock();
+	}
+
+	if (link->u.mgd.have_beacon) {
+		/*
+		 * If the AP is buggy we may get here with no DTIM period
+		 * known, so assume it's 1 which is the only safe assumption
+		 * in that case, although if the TIM IE is broken powersave
+		 * probably just won't work at all.
+		 */
+		bss_conf->dtim_period = link->u.mgd.dtim_period ?: 1;
+		bss_conf->beacon_rate = bss->beacon_rate;
+		changed |= BSS_CHANGED_BEACON_INFO;
+	} else {
+		bss_conf->beacon_rate = NULL;
+		bss_conf->dtim_period = 0;
+	}
+
+	/* Tell the driver to monitor connection quality (if supported) */
+	if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
+	    bss_conf->cqm_rssi_thold)
+		changed |= BSS_CHANGED_CQM;
+
+	return changed;
+}
+
+static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
+				     struct ieee80211_mgd_assoc_data *assoc_data,
+				     u64 changed[IEEE80211_MLD_MAX_NUM_LINKS])
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
+	u64 vif_changed = BSS_CHANGED_ASSOC;
+	unsigned int link_id;
+
+	sdata->u.mgd.associated = true;
+
+	for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+		struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
+		struct ieee80211_link_data *link;
+
+		if (!cbss)
+			continue;
+
+		link = sdata_dereference(sdata->link[link_id], sdata);
+		if (WARN_ON(!link))
+			return;
+
+		changed[link_id] |= ieee80211_link_set_associated(link, cbss);
+	}
+
+	/* just to be sure */
+	ieee80211_stop_poll(sdata);
+
+	ieee80211_led_assoc(local, 1);
+
+	vif_cfg->assoc = 1;
+
+	/* Enable ARP filtering */
+	if (vif_cfg->arp_addr_cnt)
+		vif_changed |= BSS_CHANGED_ARP_FILTER;
+
+	if (sdata->vif.valid_links) {
+		for (link_id = 0;
+		     link_id < IEEE80211_MLD_MAX_NUM_LINKS;
+		     link_id++) {
+			struct ieee80211_link_data *link;
+			struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
+
+			if (!cbss)
+				continue;
+
+			link = sdata_dereference(sdata->link[link_id], sdata);
+			if (WARN_ON(!link))
+				return;
+
+			ieee80211_link_info_change_notify(sdata, link,
+							  changed[link_id]);
+
+			ieee80211_recalc_smps(sdata, link);
+		}
+
+		ieee80211_vif_cfg_change_notify(sdata, vif_changed);
+	} else {
+		ieee80211_bss_info_change_notify(sdata,
+						 vif_changed | changed[0]);
+	}
+
+	mutex_lock(&local->iflist_mtx);
+	ieee80211_recalc_ps(local);
+	mutex_unlock(&local->iflist_mtx);
+
+	/* leave this here to not change ordering in non-MLO cases */
+	if (!sdata->vif.valid_links)
+		ieee80211_recalc_smps(sdata, &sdata->deflink);
+	ieee80211_recalc_ps_vif(sdata);
+
+	netif_carrier_on(sdata->dev);
+}
+
+static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
+				   u16 stype, u16 reason, bool tx,
+				   u8 *frame_buf)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_local *local = sdata->local;
+	unsigned int link_id;
+	u32 changed = 0;
+	struct ieee80211_prep_tx_info info = {
+		.subtype = stype,
+	};
+
+	sdata_assert_lock(sdata);
+
+	if (WARN_ON_ONCE(tx && !frame_buf))
+		return;
+
+	if (WARN_ON(!ifmgd->associated))
+		return;
+
+	ieee80211_stop_poll(sdata);
+
+	ifmgd->associated = false;
+
+	/* other links will be destroyed */
+	sdata->deflink.u.mgd.bss = NULL;
+
+	netif_carrier_off(sdata->dev);
+
+	/*
+	 * if we want to get out of ps before disassoc (why?) we have
+	 * to do it before sending disassoc, as otherwise the null-packet
+	 * won't be valid.
+	 */
+	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+	local->ps_sdata = NULL;
+
+	/* disable per-vif ps */
+	ieee80211_recalc_ps_vif(sdata);
+
+	/* make sure ongoing transmission finishes */
+	synchronize_net();
+
+	/*
+	 * drop any frame before deauth/disassoc, this can be data or
+	 * management frame. Since we are disconnecting, we should not
+	 * insist sending these frames which can take time and delay
+	 * the disconnection and possible the roaming.
+	 */
+	if (tx)
+		ieee80211_flush_queues(local, sdata, true);
+
+	/* deauthenticate/disassociate now */
+	if (tx || frame_buf) {
+		/*
+		 * In multi channel scenarios guarantee that the virtual
+		 * interface is granted immediate airtime to transmit the
+		 * deauthentication frame by calling mgd_prepare_tx, if the
+		 * driver requested so.
+		 */
+		if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) &&
+		    !sdata->deflink.u.mgd.have_beacon) {
+			drv_mgd_prepare_tx(sdata->local, sdata, &info);
+		}
+
+		ieee80211_send_deauth_disassoc(sdata, sdata->vif.cfg.ap_addr,
+					       sdata->vif.cfg.ap_addr, stype,
+					       reason, tx, frame_buf);
+	}
+
+	/* flush out frame - make sure the deauth was actually sent */
+	if (tx)
+		ieee80211_flush_queues(local, sdata, false);
+
+	drv_mgd_complete_tx(sdata->local, sdata, &info);
+
+	/* clear AP addr only after building the needed mgmt frames */
+	eth_zero_addr(sdata->deflink.u.mgd.bssid);
+	eth_zero_addr(sdata->vif.cfg.ap_addr);
+
+	sdata->vif.cfg.ssid_len = 0;
+
+	/* remove AP and TDLS peers */
+	sta_info_flush(sdata);
+
+	/* finally reset all BSS / config parameters */
+	if (!sdata->vif.valid_links)
+		changed |= ieee80211_reset_erp_info(sdata);
+
+	ieee80211_led_assoc(local, 0);
+	changed |= BSS_CHANGED_ASSOC;
+	sdata->vif.cfg.assoc = false;
+
+	sdata->deflink.u.mgd.p2p_noa_index = -1;
+	memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
+	       sizeof(sdata->vif.bss_conf.p2p_noa_attr));
+
+	/* on the next assoc, re-program HT/VHT parameters */
+	memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
+	memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
+	memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
+	memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
+
+	/*
+	 * reset MU-MIMO ownership and group data in default link,
+	 * if used, other links are destroyed
+	 */
+	memset(sdata->vif.bss_conf.mu_group.membership, 0,
+	       sizeof(sdata->vif.bss_conf.mu_group.membership));
+	memset(sdata->vif.bss_conf.mu_group.position, 0,
+	       sizeof(sdata->vif.bss_conf.mu_group.position));
+	if (!sdata->vif.valid_links)
+		changed |= BSS_CHANGED_MU_GROUPS;
+	sdata->vif.bss_conf.mu_mimo_owner = false;
+
+	sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
+
+	del_timer_sync(&local->dynamic_ps_timer);
+	cancel_work_sync(&local->dynamic_ps_enable_work);
+
+	/* Disable ARP filtering */
+	if (sdata->vif.cfg.arp_addr_cnt)
+		changed |= BSS_CHANGED_ARP_FILTER;
+
+	sdata->vif.bss_conf.qos = false;
+	if (!sdata->vif.valid_links) {
+		changed |= BSS_CHANGED_QOS;
+		/* The BSSID (not really interesting) and HT changed */
+		changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
+		ieee80211_bss_info_change_notify(sdata, changed);
+	} else {
+		ieee80211_vif_cfg_change_notify(sdata, changed);
+	}
+
+	/* disassociated - set to defaults now */
+	ieee80211_set_wmm_default(&sdata->deflink, false, false);
+
+	del_timer_sync(&sdata->u.mgd.conn_mon_timer);
+	del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
+	del_timer_sync(&sdata->u.mgd.timer);
+	del_timer_sync(&sdata->deflink.u.mgd.chswitch_timer);
+
+	sdata->vif.bss_conf.dtim_period = 0;
+	sdata->vif.bss_conf.beacon_rate = NULL;
+
+	sdata->deflink.u.mgd.have_beacon = false;
+	sdata->deflink.u.mgd.tracking_signal_avg = false;
+	sdata->deflink.u.mgd.disable_wmm_tracking = false;
+
+	ifmgd->flags = 0;
+	sdata->deflink.u.mgd.conn_flags = 0;
+	mutex_lock(&local->mtx);
+
+	for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) {
+		struct ieee80211_link_data *link;
+
+		link = sdata_dereference(sdata->link[link_id], sdata);
+		if (!link)
+			continue;
+		ieee80211_link_release_channel(link);
+	}
+
+	sdata->vif.bss_conf.csa_active = false;
+	sdata->deflink.u.mgd.csa_waiting_bcn = false;
+	sdata->deflink.u.mgd.csa_ignored_same_chan = false;
+	if (sdata->deflink.csa_block_tx) {
+		ieee80211_wake_vif_queues(local, sdata,
+					  IEEE80211_QUEUE_STOP_REASON_CSA);
+		sdata->deflink.csa_block_tx = false;
+	}
+	mutex_unlock(&local->mtx);
+
+	/* existing TX TSPEC sessions no longer exist */
+	memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
+	cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
+
+	sdata->vif.bss_conf.pwr_reduction = 0;
+	sdata->vif.bss_conf.tx_pwr_env_num = 0;
+	memset(sdata->vif.bss_conf.tx_pwr_env, 0,
+	       sizeof(sdata->vif.bss_conf.tx_pwr_env));
+
+	ieee80211_vif_set_links(sdata, 0);
+}
+
+static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_local *local = sdata->local;
+
+	mutex_lock(&local->mtx);
+	if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
+		goto out;
+
+	__ieee80211_stop_poll(sdata);
+
+	mutex_lock(&local->iflist_mtx);
+	ieee80211_recalc_ps(local);
+	mutex_unlock(&local->iflist_mtx);
+
+	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
+		goto out;
+
+	/*
+	 * We've received a probe response, but are not sure whether
+	 * we have or will be receiving any beacons or data, so let's
+	 * schedule the timers again, just in case.
+	 */
+	ieee80211_sta_reset_beacon_monitor(sdata);
+
+	mod_timer(&ifmgd->conn_mon_timer,
+		  round_jiffies_up(jiffies +
+				   IEEE80211_CONNECTION_IDLE_TIME));
+out:
+	mutex_unlock(&local->mtx);
+}
+
+static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
+					   struct ieee80211_hdr *hdr,
+					   u16 tx_time)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u16 tid;
+	int ac;
+	struct ieee80211_sta_tx_tspec *tx_tspec;
+	unsigned long now = jiffies;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	tid = ieee80211_get_tid(hdr);
+	ac = ieee80211_ac_from_tid(tid);
+	tx_tspec = &ifmgd->tx_tspec[ac];
+
+	if (likely(!tx_tspec->admitted_time))
+		return;
+
+	if (time_after(now, tx_tspec->time_slice_start + HZ)) {
+		tx_tspec->consumed_tx_time = 0;
+		tx_tspec->time_slice_start = now;
+
+		if (tx_tspec->downgraded) {
+			tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
+			schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
+		}
+	}
+
+	if (tx_tspec->downgraded)
+		return;
+
+	tx_tspec->consumed_tx_time += tx_time;
+
+	if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
+		tx_tspec->downgraded = true;
+		tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
+		schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
+	}
+}
+
+void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
+			     struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
+{
+	ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
+
+	if (!ieee80211_is_any_nullfunc(hdr->frame_control) ||
+	    !sdata->u.mgd.probe_send_count)
+		return;
+
+	if (ack)
+		sdata->u.mgd.probe_send_count = 0;
+	else
+		sdata->u.mgd.nullfunc_failed = true;
+	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+}
+
+static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata,
+					  const u8 *src, const u8 *dst,
+					  const u8 *ssid, size_t ssid_len,
+					  struct ieee80211_channel *channel)
+{
+	struct sk_buff *skb;
+
+	skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel,
+					ssid, ssid_len, NULL, 0,
+					IEEE80211_PROBE_FLAG_DIRECTED);
+	if (skb)
+		ieee80211_tx_skb(sdata, skb);
+}
+
+static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u8 *dst = sdata->vif.cfg.ap_addr;
+	u8 unicast_limit = max(1, max_probe_tries - 3);
+	struct sta_info *sta;
+
+	if (WARN_ON(sdata->vif.valid_links))
+		return;
+
+	/*
+	 * Try sending broadcast probe requests for the last three
+	 * probe requests after the first ones failed since some
+	 * buggy APs only support broadcast probe requests.
+	 */
+	if (ifmgd->probe_send_count >= unicast_limit)
+		dst = NULL;
+
+	/*
+	 * When the hardware reports an accurate Tx ACK status, it's
+	 * better to send a nullfunc frame instead of a probe request,
+	 * as it will kick us off the AP quickly if we aren't associated
+	 * anymore. The timeout will be reset if the frame is ACKed by
+	 * the AP.
+	 */
+	ifmgd->probe_send_count++;
+
+	if (dst) {
+		mutex_lock(&sdata->local->sta_mtx);
+		sta = sta_info_get(sdata, dst);
+		if (!WARN_ON(!sta))
+			ieee80211_check_fast_rx(sta);
+		mutex_unlock(&sdata->local->sta_mtx);
+	}
+
+	if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
+		ifmgd->nullfunc_failed = false;
+		ieee80211_send_nullfunc(sdata->local, sdata, false);
+	} else {
+		ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst,
+					      sdata->vif.cfg.ssid,
+					      sdata->vif.cfg.ssid_len,
+					      sdata->deflink.u.mgd.bss->channel);
+	}
+
+	ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
+	run_again(sdata, ifmgd->probe_timeout);
+}
+
+static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
+				   bool beacon)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	bool already = false;
+
+	if (WARN_ON(sdata->vif.valid_links))
+		return;
+
+	if (!ieee80211_sdata_running(sdata))
+		return;
+
+	sdata_lock(sdata);
+
+	if (!ifmgd->associated)
+		goto out;
+
+	mutex_lock(&sdata->local->mtx);
+
+	if (sdata->local->tmp_channel || sdata->local->scanning) {
+		mutex_unlock(&sdata->local->mtx);
+		goto out;
+	}
+
+	if (sdata->local->suspending) {
+		/* reschedule after resume */
+		mutex_unlock(&sdata->local->mtx);
+		ieee80211_reset_ap_probe(sdata);
+		goto out;
+	}
+
+	if (beacon) {
+		mlme_dbg_ratelimited(sdata,
+				     "detected beacon loss from AP (missed %d beacons) - probing\n",
+				     beacon_loss_count);
+
+		ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
+	}
+
+	/*
+	 * The driver/our work has already reported this event or the
+	 * connection monitoring has kicked in and we have already sent
+	 * a probe request. Or maybe the AP died and the driver keeps
+	 * reporting until we disassociate...
+	 *
+	 * In either case we have to ignore the current call to this
+	 * function (except for setting the correct probe reason bit)
+	 * because otherwise we would reset the timer every time and
+	 * never check whether we received a probe response!
+	 */
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
+		already = true;
+
+	ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
+
+	mutex_unlock(&sdata->local->mtx);
+
+	if (already)
+		goto out;
+
+	mutex_lock(&sdata->local->iflist_mtx);
+	ieee80211_recalc_ps(sdata->local);
+	mutex_unlock(&sdata->local->iflist_mtx);
+
+	ifmgd->probe_send_count = 0;
+	ieee80211_mgd_probe_ap_send(sdata);
+ out:
+	sdata_unlock(sdata);
+}
+
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct cfg80211_bss *cbss;
+	struct sk_buff *skb;
+	const struct element *ssid;
+	int ssid_len;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
+		    sdata->vif.valid_links))
+		return NULL;
+
+	sdata_assert_lock(sdata);
+
+	if (ifmgd->associated)
+		cbss = sdata->deflink.u.mgd.bss;
+	else if (ifmgd->auth_data)
+		cbss = ifmgd->auth_data->bss;
+	else if (ifmgd->assoc_data && ifmgd->assoc_data->link[0].bss)
+		cbss = ifmgd->assoc_data->link[0].bss;
+	else
+		return NULL;
+
+	rcu_read_lock();
+	ssid = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID);
+	if (WARN_ONCE(!ssid || ssid->datalen > IEEE80211_MAX_SSID_LEN,
+		      "invalid SSID element (len=%d)",
+		      ssid ? ssid->datalen : -1))
+		ssid_len = 0;
+	else
+		ssid_len = ssid->datalen;
+
+	skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
+					(u32) -1, cbss->channel,
+					ssid->data, ssid_len,
+					NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED);
+	rcu_read_unlock();
+
+	return skb;
+}
+EXPORT_SYMBOL(ieee80211_ap_probereq_get);
+
+static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
+					const u8 *buf, size_t len, bool tx,
+					u16 reason, bool reconnect)
+{
+	struct ieee80211_event event = {
+		.type = MLME_EVENT,
+		.u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
+		.u.mlme.reason = reason,
+	};
+
+	if (tx)
+		cfg80211_tx_mlme_mgmt(sdata->dev, buf, len, reconnect);
+	else
+		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
+
+	drv_event_callback(sdata->local, sdata, &event);
+}
+
+static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+	bool tx;
+
+	sdata_lock(sdata);
+	if (!ifmgd->associated) {
+		sdata_unlock(sdata);
+		return;
+	}
+
+	/* in MLO assume we have a link where we can TX the frame */
+	tx = sdata->vif.valid_links || !sdata->deflink.csa_block_tx;
+
+	if (!ifmgd->driver_disconnect) {
+		unsigned int link_id;
+
+		/*
+		 * AP is probably out of range (or not reachable for another
+		 * reason) so remove the bss structs for that AP. In the case
+		 * of multi-link, it's not clear that all of them really are
+		 * out of range, but if they weren't the driver likely would
+		 * have switched to just have a single link active?
+		 */
+		for (link_id = 0;
+		     link_id < ARRAY_SIZE(sdata->link);
+		     link_id++) {
+			struct ieee80211_link_data *link;
+
+			link = sdata_dereference(sdata->link[link_id], sdata);
+			if (!link)
+				continue;
+			cfg80211_unlink_bss(local->hw.wiphy, link->u.mgd.bss);
+			link->u.mgd.bss = NULL;
+		}
+	}
+
+	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+			       ifmgd->driver_disconnect ?
+					WLAN_REASON_DEAUTH_LEAVING :
+					WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+			       tx, frame_buf);
+	mutex_lock(&local->mtx);
+	/* the other links will be destroyed */
+	sdata->vif.bss_conf.csa_active = false;
+	sdata->deflink.u.mgd.csa_waiting_bcn = false;
+	if (sdata->deflink.csa_block_tx) {
+		ieee80211_wake_vif_queues(local, sdata,
+					  IEEE80211_QUEUE_STOP_REASON_CSA);
+		sdata->deflink.csa_block_tx = false;
+	}
+	mutex_unlock(&local->mtx);
+
+	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
+				    WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+				    ifmgd->reconnect);
+	ifmgd->reconnect = false;
+
+	sdata_unlock(sdata);
+}
+
+static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata =
+		container_of(work, struct ieee80211_sub_if_data,
+			     u.mgd.beacon_connection_loss_work);
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (ifmgd->connection_loss) {
+		sdata_info(sdata, "Connection to AP %pM lost\n",
+			   sdata->vif.cfg.ap_addr);
+		__ieee80211_disconnect(sdata);
+		ifmgd->connection_loss = false;
+	} else if (ifmgd->driver_disconnect) {
+		sdata_info(sdata,
+			   "Driver requested disconnection from AP %pM\n",
+			   sdata->vif.cfg.ap_addr);
+		__ieee80211_disconnect(sdata);
+		ifmgd->driver_disconnect = false;
+	} else {
+		if (ifmgd->associated)
+			sdata->deflink.u.mgd.beacon_loss_count++;
+		ieee80211_mgd_probe_ap(sdata, true);
+	}
+}
+
+static void ieee80211_csa_connection_drop_work(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata =
+		container_of(work, struct ieee80211_sub_if_data,
+			     u.mgd.csa_connection_drop_work);
+
+	__ieee80211_disconnect(sdata);
+}
+
+void ieee80211_beacon_loss(struct ieee80211_vif *vif)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_hw *hw = &sdata->local->hw;
+
+	trace_api_beacon_loss(sdata);
+
+	sdata->u.mgd.connection_loss = false;
+	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
+}
+EXPORT_SYMBOL(ieee80211_beacon_loss);
+
+void ieee80211_connection_loss(struct ieee80211_vif *vif)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_hw *hw = &sdata->local->hw;
+
+	trace_api_connection_loss(sdata);
+
+	sdata->u.mgd.connection_loss = true;
+	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
+}
+EXPORT_SYMBOL(ieee80211_connection_loss);
+
+void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_hw *hw = &sdata->local->hw;
+
+	trace_api_disconnect(sdata, reconnect);
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return;
+
+	sdata->u.mgd.driver_disconnect = true;
+	sdata->u.mgd.reconnect = reconnect;
+	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
+}
+EXPORT_SYMBOL(ieee80211_disconnect);
+
+static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
+					bool assoc)
+{
+	struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
+
+	sdata_assert_lock(sdata);
+
+	if (!assoc) {
+		/*
+		 * we are not authenticated yet, the only timer that could be
+		 * running is the timeout for the authentication response which
+		 * which is not relevant anymore.
+		 */
+		del_timer_sync(&sdata->u.mgd.timer);
+		sta_info_destroy_addr(sdata, auth_data->ap_addr);
+
+		/* other links are destroyed */
+		sdata->deflink.u.mgd.conn_flags = 0;
+		eth_zero_addr(sdata->deflink.u.mgd.bssid);
+		ieee80211_link_info_change_notify(sdata, &sdata->deflink,
+						  BSS_CHANGED_BSSID);
+		sdata->u.mgd.flags = 0;
+
+		mutex_lock(&sdata->local->mtx);
+		ieee80211_link_release_channel(&sdata->deflink);
+		ieee80211_vif_set_links(sdata, 0);
+		mutex_unlock(&sdata->local->mtx);
+	}
+
+	cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
+	kfree(auth_data);
+	sdata->u.mgd.auth_data = NULL;
+}
+
+enum assoc_status {
+	ASSOC_SUCCESS,
+	ASSOC_REJECTED,
+	ASSOC_TIMEOUT,
+	ASSOC_ABANDON,
+};
+
+static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
+					 enum assoc_status status)
+{
+	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
+
+	sdata_assert_lock(sdata);
+
+	if (status != ASSOC_SUCCESS) {
+		/*
+		 * we are not associated yet, the only timer that could be
+		 * running is the timeout for the association response which
+		 * which is not relevant anymore.
+		 */
+		del_timer_sync(&sdata->u.mgd.timer);
+		sta_info_destroy_addr(sdata, assoc_data->ap_addr);
+
+		sdata->deflink.u.mgd.conn_flags = 0;
+		eth_zero_addr(sdata->deflink.u.mgd.bssid);
+		ieee80211_link_info_change_notify(sdata, &sdata->deflink,
+						  BSS_CHANGED_BSSID);
+		sdata->u.mgd.flags = 0;
+		sdata->vif.bss_conf.mu_mimo_owner = false;
+
+		if (status != ASSOC_REJECTED) {
+			struct cfg80211_assoc_failure data = {
+				.timeout = status == ASSOC_TIMEOUT,
+			};
+			int i;
+
+			BUILD_BUG_ON(ARRAY_SIZE(data.bss) !=
+				     ARRAY_SIZE(assoc_data->link));
+
+			for (i = 0; i < ARRAY_SIZE(data.bss); i++)
+				data.bss[i] = assoc_data->link[i].bss;
+
+			if (sdata->vif.valid_links)
+				data.ap_mld_addr = assoc_data->ap_addr;
+
+			cfg80211_assoc_failure(sdata->dev, &data);
+		}
+
+		mutex_lock(&sdata->local->mtx);
+		ieee80211_link_release_channel(&sdata->deflink);
+		ieee80211_vif_set_links(sdata, 0);
+		mutex_unlock(&sdata->local->mtx);
+	}
+
+	kfree(assoc_data);
+	sdata->u.mgd.assoc_data = NULL;
+}
+
+static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
+				     struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
+	const struct element *challenge;
+	u8 *pos;
+	u32 tx_flags = 0;
+	struct ieee80211_prep_tx_info info = {
+		.subtype = IEEE80211_STYPE_AUTH,
+	};
+
+	pos = mgmt->u.auth.variable;
+	challenge = cfg80211_find_elem(WLAN_EID_CHALLENGE, pos,
+				       len - (pos - (u8 *)mgmt));
+	if (!challenge)
+		return;
+	auth_data->expected_transaction = 4;
+	drv_mgd_prepare_tx(sdata->local, sdata, &info);
+	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
+		tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
+			   IEEE80211_TX_INTFL_MLME_CONN_TX;
+	ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
+			    (void *)challenge,
+			    challenge->datalen + sizeof(*challenge),
+			    auth_data->ap_addr, auth_data->ap_addr,
+			    auth_data->key, auth_data->key_len,
+			    auth_data->key_idx, tx_flags);
+}
+
+static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	const u8 *ap_addr = ifmgd->auth_data->ap_addr;
+	struct sta_info *sta;
+	bool result = true;
+
+	sdata_info(sdata, "authenticated\n");
+	ifmgd->auth_data->done = true;
+	ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
+	ifmgd->auth_data->timeout_started = true;
+	run_again(sdata, ifmgd->auth_data->timeout);
+
+	/* move station state to auth */
+	mutex_lock(&sdata->local->sta_mtx);
+	sta = sta_info_get(sdata, ap_addr);
+	if (!sta) {
+		WARN_ONCE(1, "%s: STA %pM not found", sdata->name, ap_addr);
+		result = false;
+		goto out;
+	}
+	if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
+		sdata_info(sdata, "failed moving %pM to auth\n", ap_addr);
+		result = false;
+		goto out;
+	}
+
+out:
+	mutex_unlock(&sdata->local->sta_mtx);
+	return result;
+}
+
+static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
+				   struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u16 auth_alg, auth_transaction, status_code;
+	struct ieee80211_event event = {
+		.type = MLME_EVENT,
+		.u.mlme.data = AUTH_EVENT,
+	};
+	struct ieee80211_prep_tx_info info = {
+		.subtype = IEEE80211_STYPE_AUTH,
+	};
+
+	sdata_assert_lock(sdata);
+
+	if (len < 24 + 6)
+		return;
+
+	if (!ifmgd->auth_data || ifmgd->auth_data->done)
+		return;
+
+	if (!ether_addr_equal(ifmgd->auth_data->ap_addr, mgmt->bssid))
+		return;
+
+	auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
+	auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
+	status_code = le16_to_cpu(mgmt->u.auth.status_code);
+
+	if (auth_alg != ifmgd->auth_data->algorithm ||
+	    (auth_alg != WLAN_AUTH_SAE &&
+	     auth_transaction != ifmgd->auth_data->expected_transaction) ||
+	    (auth_alg == WLAN_AUTH_SAE &&
+	     (auth_transaction < ifmgd->auth_data->expected_transaction ||
+	      auth_transaction > 2))) {
+		sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
+			   mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
+			   auth_transaction,
+			   ifmgd->auth_data->expected_transaction);
+		goto notify_driver;
+	}
+
+	if (status_code != WLAN_STATUS_SUCCESS) {
+		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
+
+		if (auth_alg == WLAN_AUTH_SAE &&
+		    (status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED ||
+		     (auth_transaction == 1 &&
+		      (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
+		       status_code == WLAN_STATUS_SAE_PK)))) {
+			/* waiting for userspace now */
+			ifmgd->auth_data->waiting = true;
+			ifmgd->auth_data->timeout =
+				jiffies + IEEE80211_AUTH_WAIT_SAE_RETRY;
+			ifmgd->auth_data->timeout_started = true;
+			run_again(sdata, ifmgd->auth_data->timeout);
+			goto notify_driver;
+		}
+
+		sdata_info(sdata, "%pM denied authentication (status %d)\n",
+			   mgmt->sa, status_code);
+		ieee80211_destroy_auth_data(sdata, false);
+		event.u.mlme.status = MLME_DENIED;
+		event.u.mlme.reason = status_code;
+		drv_event_callback(sdata->local, sdata, &event);
+		goto notify_driver;
+	}
+
+	switch (ifmgd->auth_data->algorithm) {
+	case WLAN_AUTH_OPEN:
+	case WLAN_AUTH_LEAP:
+	case WLAN_AUTH_FT:
+	case WLAN_AUTH_SAE:
+	case WLAN_AUTH_FILS_SK:
+	case WLAN_AUTH_FILS_SK_PFS:
+	case WLAN_AUTH_FILS_PK:
+		break;
+	case WLAN_AUTH_SHARED_KEY:
+		if (ifmgd->auth_data->expected_transaction != 4) {
+			ieee80211_auth_challenge(sdata, mgmt, len);
+			/* need another frame */
+			return;
+		}
+		break;
+	default:
+		WARN_ONCE(1, "invalid auth alg %d",
+			  ifmgd->auth_data->algorithm);
+		goto notify_driver;
+	}
+
+	event.u.mlme.status = MLME_SUCCESS;
+	info.success = 1;
+	drv_event_callback(sdata->local, sdata, &event);
+	if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE ||
+	    (auth_transaction == 2 &&
+	     ifmgd->auth_data->expected_transaction == 2)) {
+		if (!ieee80211_mark_sta_auth(sdata))
+			return; /* ignore frame -- wait for timeout */
+	} else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
+		   auth_transaction == 2) {
+		sdata_info(sdata, "SAE peer confirmed\n");
+		ifmgd->auth_data->peer_confirmed = true;
+	}
+
+	cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
+notify_driver:
+	drv_mgd_complete_tx(sdata->local, sdata, &info);
+}
+
+#define case_WLAN(type) \
+	case WLAN_REASON_##type: return #type
+
+const char *ieee80211_get_reason_code_string(u16 reason_code)
+{
+	switch (reason_code) {
+	case_WLAN(UNSPECIFIED);
+	case_WLAN(PREV_AUTH_NOT_VALID);
+	case_WLAN(DEAUTH_LEAVING);
+	case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
+	case_WLAN(DISASSOC_AP_BUSY);
+	case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
+	case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
+	case_WLAN(DISASSOC_STA_HAS_LEFT);
+	case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
+	case_WLAN(DISASSOC_BAD_POWER);
+	case_WLAN(DISASSOC_BAD_SUPP_CHAN);
+	case_WLAN(INVALID_IE);
+	case_WLAN(MIC_FAILURE);
+	case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
+	case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
+	case_WLAN(IE_DIFFERENT);
+	case_WLAN(INVALID_GROUP_CIPHER);
+	case_WLAN(INVALID_PAIRWISE_CIPHER);
+	case_WLAN(INVALID_AKMP);
+	case_WLAN(UNSUPP_RSN_VERSION);
+	case_WLAN(INVALID_RSN_IE_CAP);
+	case_WLAN(IEEE8021X_FAILED);
+	case_WLAN(CIPHER_SUITE_REJECTED);
+	case_WLAN(DISASSOC_UNSPECIFIED_QOS);
+	case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
+	case_WLAN(DISASSOC_LOW_ACK);
+	case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
+	case_WLAN(QSTA_LEAVE_QBSS);
+	case_WLAN(QSTA_NOT_USE);
+	case_WLAN(QSTA_REQUIRE_SETUP);
+	case_WLAN(QSTA_TIMEOUT);
+	case_WLAN(QSTA_CIPHER_NOT_SUPP);
+	case_WLAN(MESH_PEER_CANCELED);
+	case_WLAN(MESH_MAX_PEERS);
+	case_WLAN(MESH_CONFIG);
+	case_WLAN(MESH_CLOSE);
+	case_WLAN(MESH_MAX_RETRIES);
+	case_WLAN(MESH_CONFIRM_TIMEOUT);
+	case_WLAN(MESH_INVALID_GTK);
+	case_WLAN(MESH_INCONSISTENT_PARAM);
+	case_WLAN(MESH_INVALID_SECURITY);
+	case_WLAN(MESH_PATH_ERROR);
+	case_WLAN(MESH_PATH_NOFORWARD);
+	case_WLAN(MESH_PATH_DEST_UNREACHABLE);
+	case_WLAN(MAC_EXISTS_IN_MBSS);
+	case_WLAN(MESH_CHAN_REGULATORY);
+	case_WLAN(MESH_CHAN);
+	default: return "<unknown>";
+	}
+}
+
+static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
+				     struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
+
+	sdata_assert_lock(sdata);
+
+	if (len < 24 + 2)
+		return;
+
+	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
+		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
+		return;
+	}
+
+	if (ifmgd->associated &&
+	    ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) {
+		sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
+			   sdata->vif.cfg.ap_addr, reason_code,
+			   ieee80211_get_reason_code_string(reason_code));
+
+		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
+
+		ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
+					    reason_code, false);
+		return;
+	}
+
+	if (ifmgd->assoc_data &&
+	    ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->ap_addr)) {
+		sdata_info(sdata,
+			   "deauthenticated from %pM while associating (Reason: %u=%s)\n",
+			   ifmgd->assoc_data->ap_addr, reason_code,
+			   ieee80211_get_reason_code_string(reason_code));
+
+		ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
+
+		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
+		return;
+	}
+}
+
+
+static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
+				       struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u16 reason_code;
+
+	sdata_assert_lock(sdata);
+
+	if (len < 24 + 2)
+		return;
+
+	if (!ifmgd->associated ||
+	    !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr))
+		return;
+
+	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
+
+	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
+		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
+		return;
+	}
+
+	sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
+		   sdata->vif.cfg.ap_addr, reason_code,
+		   ieee80211_get_reason_code_string(reason_code));
+
+	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
+
+	ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code,
+				    false);
+}
+
+static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
+				u8 *supp_rates, unsigned int supp_rates_len,
+				u32 *rates, u32 *basic_rates,
+				bool *have_higher_than_11mbit,
+				int *min_rate, int *min_rate_index,
+				int shift)
+{
+	int i, j;
+
+	for (i = 0; i < supp_rates_len; i++) {
+		int rate = supp_rates[i] & 0x7f;
+		bool is_basic = !!(supp_rates[i] & 0x80);
+
+		if ((rate * 5 * (1 << shift)) > 110)
+			*have_higher_than_11mbit = true;
+
+		/*
+		 * Skip HT, VHT, HE and SAE H2E only BSS membership selectors
+		 * since they're not rates.
+		 *
+		 * Note: Even though the membership selector and the basic
+		 *	 rate flag share the same bit, they are not exactly
+		 *	 the same.
+		 */
+		if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
+		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
+		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY) ||
+		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_SAE_H2E))
+			continue;
+
+		for (j = 0; j < sband->n_bitrates; j++) {
+			struct ieee80211_rate *br;
+			int brate;
+
+			br = &sband->bitrates[j];
+
+			brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
+			if (brate == rate) {
+				*rates |= BIT(j);
+				if (is_basic)
+					*basic_rates |= BIT(j);
+				if ((rate * 5) < *min_rate) {
+					*min_rate = rate * 5;
+					*min_rate_index = j;
+				}
+				break;
+			}
+		}
+	}
+}
+
+static bool ieee80211_twt_req_supported(const struct link_sta_info *link_sta,
+					const struct ieee802_11_elems *elems)
+{
+	if (elems->ext_capab_len < 10)
+		return false;
+
+	if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT))
+		return false;
+
+	return link_sta->pub->he_cap.he_cap_elem.mac_cap_info[0] &
+		IEEE80211_HE_MAC_CAP0_TWT_RES;
+}
+
+static int ieee80211_recalc_twt_req(struct ieee80211_link_data *link,
+				    struct link_sta_info *link_sta,
+				    struct ieee802_11_elems *elems)
+{
+	bool twt = ieee80211_twt_req_supported(link_sta, elems);
+
+	if (link->conf->twt_requester != twt) {
+		link->conf->twt_requester = twt;
+		return BSS_CHANGED_TWT;
+	}
+	return 0;
+}
+
+static bool ieee80211_twt_bcast_support(struct ieee80211_sub_if_data *sdata,
+					struct ieee80211_bss_conf *bss_conf,
+					struct ieee80211_supported_band *sband,
+					struct link_sta_info *link_sta)
+{
+	const struct ieee80211_sta_he_cap *own_he_cap =
+		ieee80211_get_he_iftype_cap(sband,
+					    ieee80211_vif_type_p2p(&sdata->vif));
+
+	return bss_conf->he_support &&
+		(link_sta->pub->he_cap.he_cap_elem.mac_cap_info[2] &
+			IEEE80211_HE_MAC_CAP2_BCAST_TWT) &&
+		own_he_cap &&
+		(own_he_cap->he_cap_elem.mac_cap_info[2] &
+			IEEE80211_HE_MAC_CAP2_BCAST_TWT);
+}
+
+static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link,
+					struct link_sta_info *link_sta,
+					struct cfg80211_bss *cbss,
+					struct ieee80211_mgmt *mgmt,
+					const u8 *elem_start,
+					unsigned int elem_len,
+					u64 *changed)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
+	struct ieee80211_bss_conf *bss_conf = link->conf;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_elems_parse_params parse_params = {
+		.start = elem_start,
+		.len = elem_len,
+		.bss = cbss,
+		.link_id = link == &sdata->deflink ? -1 : link->link_id,
+		.from_ap = true,
+	};
+	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
+	bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
+	const struct cfg80211_bss_ies *bss_ies = NULL;
+	struct ieee80211_supported_band *sband;
+	struct ieee802_11_elems *elems;
+	u16 capab_info;
+	bool ret;
+
+	elems = ieee802_11_parse_elems_full(&parse_params);
+	if (!elems)
+		return false;
+
+	/* FIXME: use from STA profile element after parsing that */
+	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
+
+	if (!is_s1g && !elems->supp_rates) {
+		sdata_info(sdata, "no SuppRates element in AssocResp\n");
+		ret = false;
+		goto out;
+	}
+
+	link->u.mgd.tdls_chan_switch_prohibited =
+		elems->ext_capab && elems->ext_capab_len >= 5 &&
+		(elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
+
+	/*
+	 * Some APs are erroneously not including some information in their
+	 * (re)association response frames. Try to recover by using the data
+	 * from the beacon or probe response. This seems to afflict mobile
+	 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
+	 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
+	 */
+	if (!is_6ghz &&
+	    ((assoc_data->wmm && !elems->wmm_param) ||
+	     (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) &&
+	      (!elems->ht_cap_elem || !elems->ht_operation)) ||
+	     (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) &&
+	      (!elems->vht_cap_elem || !elems->vht_operation)))) {
+		const struct cfg80211_bss_ies *ies;
+		struct ieee802_11_elems *bss_elems;
+
+		rcu_read_lock();
+		ies = rcu_dereference(cbss->ies);
+		if (ies)
+			bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
+					  GFP_ATOMIC);
+		rcu_read_unlock();
+		if (!bss_ies) {
+			ret = false;
+			goto out;
+		}
+
+		parse_params.start = bss_ies->data;
+		parse_params.len = bss_ies->len;
+		bss_elems = ieee802_11_parse_elems_full(&parse_params);
+		if (!bss_elems) {
+			ret = false;
+			goto out;
+		}
+
+		if (assoc_data->wmm &&
+		    !elems->wmm_param && bss_elems->wmm_param) {
+			elems->wmm_param = bss_elems->wmm_param;
+			sdata_info(sdata,
+				   "AP bug: WMM param missing from AssocResp\n");
+		}
+
+		/*
+		 * Also check if we requested HT/VHT, otherwise the AP doesn't
+		 * have to include the IEs in the (re)association response.
+		 */
+		if (!elems->ht_cap_elem && bss_elems->ht_cap_elem &&
+		    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) {
+			elems->ht_cap_elem = bss_elems->ht_cap_elem;
+			sdata_info(sdata,
+				   "AP bug: HT capability missing from AssocResp\n");
+		}
+		if (!elems->ht_operation && bss_elems->ht_operation &&
+		    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) {
+			elems->ht_operation = bss_elems->ht_operation;
+			sdata_info(sdata,
+				   "AP bug: HT operation missing from AssocResp\n");
+		}
+		if (!elems->vht_cap_elem && bss_elems->vht_cap_elem &&
+		    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
+			elems->vht_cap_elem = bss_elems->vht_cap_elem;
+			sdata_info(sdata,
+				   "AP bug: VHT capa missing from AssocResp\n");
+		}
+		if (!elems->vht_operation && bss_elems->vht_operation &&
+		    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
+			elems->vht_operation = bss_elems->vht_operation;
+			sdata_info(sdata,
+				   "AP bug: VHT operation missing from AssocResp\n");
+		}
+
+		kfree(bss_elems);
+	}
+
+	/*
+	 * We previously checked these in the beacon/probe response, so
+	 * they should be present here. This is just a safety net.
+	 */
+	if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) &&
+	    (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) {
+		sdata_info(sdata,
+			   "HT AP is missing WMM params or HT capability/operation\n");
+		ret = false;
+		goto out;
+	}
+
+	if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) &&
+	    (!elems->vht_cap_elem || !elems->vht_operation)) {
+		sdata_info(sdata,
+			   "VHT AP is missing VHT capability/operation\n");
+		ret = false;
+		goto out;
+	}
+
+	if (is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
+	    !elems->he_6ghz_capa) {
+		sdata_info(sdata,
+			   "HE 6 GHz AP is missing HE 6 GHz band capability\n");
+		ret = false;
+		goto out;
+	}
+
+	if (WARN_ON(!link->conf->chandef.chan)) {
+		ret = false;
+		goto out;
+	}
+	sband = local->hw.wiphy->bands[link->conf->chandef.chan->band];
+
+	if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
+	    (!elems->he_cap || !elems->he_operation)) {
+		sdata_info(sdata,
+			   "HE AP is missing HE capability/operation\n");
+		ret = false;
+		goto out;
+	}
+
+	/* Set up internal HT/VHT capabilities */
+	if (elems->ht_cap_elem && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT))
+		ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+						  elems->ht_cap_elem,
+						  link_sta);
+
+	if (elems->vht_cap_elem &&
+	    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
+		const struct ieee80211_vht_cap *bss_vht_cap = NULL;
+		const struct cfg80211_bss_ies *ies;
+
+		/*
+		 * Cisco AP module 9115 with FW 17.3 has a bug and sends a
+		 * too large maximum MPDU length in the association response
+		 * (indicating 12k) that it cannot actually process ...
+		 * Work around that.
+		 */
+		rcu_read_lock();
+		ies = rcu_dereference(cbss->ies);
+		if (ies) {
+			const struct element *elem;
+
+			elem = cfg80211_find_elem(WLAN_EID_VHT_CAPABILITY,
+						  ies->data, ies->len);
+			if (elem && elem->datalen >= sizeof(*bss_vht_cap))
+				bss_vht_cap = (const void *)elem->data;
+		}
+
+		ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
+						    elems->vht_cap_elem,
+						    bss_vht_cap, link_sta);
+		rcu_read_unlock();
+	}
+
+	if (elems->he_operation && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
+	    elems->he_cap) {
+		ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
+						  elems->he_cap,
+						  elems->he_cap_len,
+						  elems->he_6ghz_capa,
+						  link_sta);
+
+		bss_conf->he_support = link_sta->pub->he_cap.has_he;
+		if (elems->rsnx && elems->rsnx_len &&
+		    (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) &&
+		    wiphy_ext_feature_isset(local->hw.wiphy,
+					    NL80211_EXT_FEATURE_PROTECTED_TWT))
+			bss_conf->twt_protected = true;
+		else
+			bss_conf->twt_protected = false;
+
+		*changed |= ieee80211_recalc_twt_req(link, link_sta, elems);
+
+		if (elems->eht_operation && elems->eht_cap &&
+		    !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) {
+			ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband,
+							    elems->he_cap,
+							    elems->he_cap_len,
+							    elems->eht_cap,
+							    elems->eht_cap_len,
+							    link_sta);
+
+			bss_conf->eht_support = link_sta->pub->eht_cap.has_eht;
+		} else {
+			bss_conf->eht_support = false;
+		}
+	} else {
+		bss_conf->he_support = false;
+		bss_conf->twt_requester = false;
+		bss_conf->twt_protected = false;
+		bss_conf->eht_support = false;
+	}
+
+	bss_conf->twt_broadcast =
+		ieee80211_twt_bcast_support(sdata, bss_conf, sband, link_sta);
+
+	if (bss_conf->he_support) {
+		bss_conf->he_bss_color.color =
+			le32_get_bits(elems->he_operation->he_oper_params,
+				      IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
+		bss_conf->he_bss_color.partial =
+			le32_get_bits(elems->he_operation->he_oper_params,
+				      IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR);
+		bss_conf->he_bss_color.enabled =
+			!le32_get_bits(elems->he_operation->he_oper_params,
+				       IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED);
+
+		if (bss_conf->he_bss_color.enabled)
+			*changed |= BSS_CHANGED_HE_BSS_COLOR;
+
+		bss_conf->htc_trig_based_pkt_ext =
+			le32_get_bits(elems->he_operation->he_oper_params,
+				      IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
+		bss_conf->frame_time_rts_th =
+			le32_get_bits(elems->he_operation->he_oper_params,
+				      IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
+
+		bss_conf->uora_exists = !!elems->uora_element;
+		if (elems->uora_element)
+			bss_conf->uora_ocw_range = elems->uora_element[0];
+
+		ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation);
+		ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr);
+		/* TODO: OPEN: what happens if BSS color disable is set? */
+	}
+
+	if (cbss->transmitted_bss) {
+		bss_conf->nontransmitted = true;
+		ether_addr_copy(bss_conf->transmitter_bssid,
+				cbss->transmitted_bss->bssid);
+		bss_conf->bssid_indicator = cbss->max_bssid_indicator;
+		bss_conf->bssid_index = cbss->bssid_index;
+	}
+
+	/*
+	 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
+	 * in their association response, so ignore that data for our own
+	 * configuration. If it changed since the last beacon, we'll get the
+	 * next beacon and update then.
+	 */
+
+	/*
+	 * If an operating mode notification IE is present, override the
+	 * NSS calculation (that would be done in rate_control_rate_init())
+	 * and use the # of streams from that element.
+	 */
+	if (elems->opmode_notif &&
+	    !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
+		u8 nss;
+
+		nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
+		nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
+		nss += 1;
+		link_sta->pub->rx_nss = nss;
+	}
+
+	/*
+	 * Always handle WMM once after association regardless
+	 * of the first value the AP uses. Setting -1 here has
+	 * that effect because the AP values is an unsigned
+	 * 4-bit value.
+	 */
+	link->u.mgd.wmm_last_param_set = -1;
+	link->u.mgd.mu_edca_last_param_set = -1;
+
+	if (link->u.mgd.disable_wmm_tracking) {
+		ieee80211_set_wmm_default(link, false, false);
+	} else if (!ieee80211_sta_wmm_params(local, link, elems->wmm_param,
+					     elems->wmm_param_len,
+					     elems->mu_edca_param_set)) {
+		/* still enable QoS since we might have HT/VHT */
+		ieee80211_set_wmm_default(link, false, true);
+		/* disable WMM tracking in this case to disable
+		 * tracking WMM parameter changes in the beacon if
+		 * the parameters weren't actually valid. Doing so
+		 * avoids changing parameters very strangely when
+		 * the AP is going back and forth between valid and
+		 * invalid parameters.
+		 */
+		link->u.mgd.disable_wmm_tracking = true;
+	}
+
+	if (elems->max_idle_period_ie) {
+		bss_conf->max_idle_period =
+			le16_to_cpu(elems->max_idle_period_ie->max_idle_period);
+		bss_conf->protected_keep_alive =
+			!!(elems->max_idle_period_ie->idle_options &
+			   WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
+		*changed |= BSS_CHANGED_KEEP_ALIVE;
+	} else {
+		bss_conf->max_idle_period = 0;
+		bss_conf->protected_keep_alive = false;
+	}
+
+	/* set assoc capability (AID was already set earlier),
+	 * ieee80211_set_associated() will tell the driver */
+	bss_conf->assoc_capability = capab_info;
+
+	ret = true;
+out:
+	kfree(elems);
+	kfree(bss_ies);
+	return ret;
+}
+
+static int ieee80211_mgd_setup_link_sta(struct ieee80211_link_data *link,
+					struct sta_info *sta,
+					struct link_sta_info *link_sta,
+					struct cfg80211_bss *cbss)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_bss *bss = (void *)cbss->priv;
+	u32 rates = 0, basic_rates = 0;
+	bool have_higher_than_11mbit = false;
+	int min_rate = INT_MAX, min_rate_index = -1;
+	/* this is clearly wrong for MLO but we'll just remove it later */
+	int shift = ieee80211_vif_get_shift(&sdata->vif);
+	struct ieee80211_supported_band *sband;
+
+	memcpy(link_sta->addr, cbss->bssid, ETH_ALEN);
+	memcpy(link_sta->pub->addr, cbss->bssid, ETH_ALEN);
+
+	/* TODO: S1G Basic Rate Set is expressed elsewhere */
+	if (cbss->channel->band == NL80211_BAND_S1GHZ) {
+		ieee80211_s1g_sta_rate_init(sta);
+		return 0;
+	}
+
+	sband = local->hw.wiphy->bands[cbss->channel->band];
+
+	ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len,
+			    &rates, &basic_rates, &have_higher_than_11mbit,
+			    &min_rate, &min_rate_index, shift);
+
+	/*
+	 * This used to be a workaround for basic rates missing
+	 * in the association response frame. Now that we no
+	 * longer use the basic rates from there, it probably
+	 * doesn't happen any more, but keep the workaround so
+	 * in case some *other* APs are buggy in different ways
+	 * we can connect -- with a warning.
+	 * Allow this workaround only in case the AP provided at least
+	 * one rate.
+	 */
+	if (min_rate_index < 0) {
+		link_info(link, "No legacy rates in association response\n");
+		return -EINVAL;
+	} else if (!basic_rates) {
+		link_info(link, "No basic rates, using min rate instead\n");
+		basic_rates = BIT(min_rate_index);
+	}
+
+	if (rates)
+		link_sta->pub->supp_rates[cbss->channel->band] = rates;
+	else
+		link_info(link, "No rates found, keeping mandatory only\n");
+
+	link->conf->basic_rates = basic_rates;
+
+	/* cf. IEEE 802.11 9.2.12 */
+	link->operating_11g_mode = sband->band == NL80211_BAND_2GHZ &&
+				   have_higher_than_11mbit;
+
+	return 0;
+}
+
+static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link,
+				  struct cfg80211_bss *cbss)
+{
+	struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp;
+	const struct element *ht_cap_elem, *vht_cap_elem;
+	const struct cfg80211_bss_ies *ies;
+	const struct ieee80211_ht_cap *ht_cap;
+	const struct ieee80211_vht_cap *vht_cap;
+	const struct ieee80211_he_cap_elem *he_cap;
+	const struct element *he_cap_elem;
+	u16 mcs_80_map, mcs_160_map;
+	int i, mcs_nss_size;
+	bool support_160;
+	u8 chains = 1;
+
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)
+		return chains;
+
+	ht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_CAPABILITY);
+	if (ht_cap_elem && ht_cap_elem->datalen >= sizeof(*ht_cap)) {
+		ht_cap = (void *)ht_cap_elem->data;
+		chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
+		/*
+		 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
+		 *	 "Tx Unequal Modulation Supported" fields.
+		 */
+	}
+
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)
+		return chains;
+
+	vht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY);
+	if (vht_cap_elem && vht_cap_elem->datalen >= sizeof(*vht_cap)) {
+		u8 nss;
+		u16 tx_mcs_map;
+
+		vht_cap = (void *)vht_cap_elem->data;
+		tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
+		for (nss = 8; nss > 0; nss--) {
+			if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
+					IEEE80211_VHT_MCS_NOT_SUPPORTED)
+				break;
+		}
+		/* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
+		chains = max(chains, nss);
+	}
+
+	if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE)
+		return chains;
+
+	ies = rcu_dereference(cbss->ies);
+	he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY,
+					     ies->data, ies->len);
+
+	if (!he_cap_elem || he_cap_elem->datalen < sizeof(*he_cap))
+		return chains;
+
+	/* skip one byte ext_tag_id */
+	he_cap = (void *)(he_cap_elem->data + 1);
+	mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap);
+
+	/* invalid HE IE */
+	if (he_cap_elem->datalen < 1 + mcs_nss_size + sizeof(*he_cap))
+		return chains;
+
+	/* mcs_nss is right after he_cap info */
+	he_mcs_nss_supp = (void *)(he_cap + 1);
+
+	mcs_80_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80);
+
+	for (i = 7; i >= 0; i--) {
+		u8 mcs_80 = mcs_80_map >> (2 * i) & 3;
+
+		if (mcs_80 != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
+			chains = max_t(u8, chains, i + 1);
+			break;
+		}
+	}
+
+	support_160 = he_cap->phy_cap_info[0] &
+		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+
+	if (!support_160)
+		return chains;
+
+	mcs_160_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_160);
+	for (i = 7; i >= 0; i--) {
+		u8 mcs_160 = mcs_160_map >> (2 * i) & 3;
+
+		if (mcs_160 != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
+			chains = max_t(u8, chains, i + 1);
+			break;
+		}
+	}
+
+	return chains;
+}
+
+static bool
+ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata,
+				     const struct cfg80211_bss_ies *ies,
+				     const struct ieee80211_he_operation *he_op)
+{
+	const struct element *he_cap_elem;
+	const struct ieee80211_he_cap_elem *he_cap;
+	struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp;
+	u16 mcs_80_map_tx, mcs_80_map_rx;
+	u16 ap_min_req_set;
+	int mcs_nss_size;
+	int nss;
+
+	he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY,
+					     ies->data, ies->len);
+
+	if (!he_cap_elem)
+		return false;
+
+	/* invalid HE IE */
+	if (he_cap_elem->datalen < 1 + sizeof(*he_cap)) {
+		sdata_info(sdata,
+			   "Invalid HE elem, Disable HE\n");
+		return false;
+	}
+
+	/* skip one byte ext_tag_id */
+	he_cap = (void *)(he_cap_elem->data + 1);
+	mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap);
+
+	/* invalid HE IE */
+	if (he_cap_elem->datalen < 1 + sizeof(*he_cap) + mcs_nss_size) {
+		sdata_info(sdata,
+			   "Invalid HE elem with nss size, Disable HE\n");
+		return false;
+	}
+
+	/* mcs_nss is right after he_cap info */
+	he_mcs_nss_supp = (void *)(he_cap + 1);
+
+	mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80);
+	mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80);
+
+	/* P802.11-REVme/D0.3
+	 * 27.1.1 Introduction to the HE PHY
+	 * ...
+	 * An HE STA shall support the following features:
+	 * ...
+	 * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all
+	 * supported channel widths for HE SU PPDUs
+	 */
+	if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED ||
+	    (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) {
+		sdata_info(sdata,
+			   "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n",
+			   mcs_80_map_tx, mcs_80_map_rx);
+		return false;
+	}
+
+	if (!he_op)
+		return true;
+
+	ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
+
+	/*
+	 * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all
+	 * zeroes, which is nonsense, and completely inconsistent with itself
+	 * (it doesn't have 8 streams). Accept the settings in this case anyway.
+	 */
+	if (!ap_min_req_set)
+		return true;
+
+	/* make sure the AP is consistent with itself
+	 *
+	 * P802.11-REVme/D0.3
+	 * 26.17.1 Basic HE BSS operation
+	 *
+	 * A STA that is operating in an HE BSS shall be able to receive and
+	 * transmit at each of the <HE-MCS, NSS> tuple values indicated by the
+	 * Basic HE-MCS And NSS Set field of the HE Operation parameter of the
+	 * MLME-START.request primitive and shall be able to receive at each of
+	 * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and
+	 * NSS Set field in the HE Capabilities parameter of the MLMESTART.request
+	 * primitive
+	 */
+	for (nss = 8; nss > 0; nss--) {
+		u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
+		u8 ap_rx_val;
+		u8 ap_tx_val;
+
+		if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
+			continue;
+
+		ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3;
+		ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3;
+
+		if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
+		    ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
+		    ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) {
+			sdata_info(sdata,
+				   "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n",
+				   nss, ap_rx_val, ap_rx_val, ap_op_val);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static bool
+ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata,
+				    struct ieee80211_supported_band *sband,
+				    const struct ieee80211_he_operation *he_op)
+{
+	const struct ieee80211_sta_he_cap *sta_he_cap =
+		ieee80211_get_he_iftype_cap(sband,
+					    ieee80211_vif_type_p2p(&sdata->vif));
+	u16 ap_min_req_set;
+	int i;
+
+	if (!sta_he_cap || !he_op)
+		return false;
+
+	ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
+
+	/*
+	 * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all
+	 * zeroes, which is nonsense, and completely inconsistent with itself
+	 * (it doesn't have 8 streams). Accept the settings in this case anyway.
+	 */
+	if (!ap_min_req_set)
+		return true;
+
+	/* Need to go over for 80MHz, 160MHz and for 80+80 */
+	for (i = 0; i < 3; i++) {
+		const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp =
+			&sta_he_cap->he_mcs_nss_supp;
+		u16 sta_mcs_map_rx =
+			le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]);
+		u16 sta_mcs_map_tx =
+			le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]);
+		u8 nss;
+		bool verified = true;
+
+		/*
+		 * For each band there is a maximum of 8 spatial streams
+		 * possible. Each of the sta_mcs_map_* is a 16-bit struct built
+		 * of 2 bits per NSS (1-8), with the values defined in enum
+		 * ieee80211_he_mcs_support. Need to make sure STA TX and RX
+		 * capabilities aren't less than the AP's minimum requirements
+		 * for this HE BSS per SS.
+		 * It is enough to find one such band that meets the reqs.
+		 */
+		for (nss = 8; nss > 0; nss--) {
+			u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3;
+			u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3;
+			u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
+
+			if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
+				continue;
+
+			/*
+			 * Make sure the HE AP doesn't require MCSs that aren't
+			 * supported by the client as required by spec
+			 *
+			 * P802.11-REVme/D0.3
+			 * 26.17.1 Basic HE BSS operation
+			 *
+			 * An HE STA shall not attempt to join * (MLME-JOIN.request primitive)
+			 * a BSS, unless it supports (i.e., is able to both transmit and
+			 * receive using) all of the <HE-MCS, NSS> tuples in the basic
+			 * HE-MCS and NSS set.
+			 */
+			if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
+			    sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
+			    (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) {
+				verified = false;
+				break;
+			}
+		}
+
+		if (verified)
+			return true;
+	}
+
+	/* If here, STA doesn't meet AP's HE min requirements */
+	return false;
+}
+
+static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
+				  struct ieee80211_link_data *link,
+				  struct cfg80211_bss *cbss,
+				  ieee80211_conn_flags_t *conn_flags)
+{
+	struct ieee80211_local *local = sdata->local;
+	const struct ieee80211_ht_cap *ht_cap = NULL;
+	const struct ieee80211_ht_operation *ht_oper = NULL;
+	const struct ieee80211_vht_operation *vht_oper = NULL;
+	const struct ieee80211_he_operation *he_oper = NULL;
+	const struct ieee80211_eht_operation *eht_oper = NULL;
+	const struct ieee80211_s1g_oper_ie *s1g_oper = NULL;
+	struct ieee80211_supported_band *sband;
+	struct cfg80211_chan_def chandef;
+	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
+	bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
+	struct ieee80211_bss *bss = (void *)cbss->priv;
+	struct ieee80211_elems_parse_params parse_params = {
+		.bss = cbss,
+		.link_id = -1,
+		.from_ap = true,
+	};
+	struct ieee802_11_elems *elems;
+	const struct cfg80211_bss_ies *ies;
+	int ret;
+	u32 i;
+	bool have_80mhz;
+
+	rcu_read_lock();
+
+	ies = rcu_dereference(cbss->ies);
+	parse_params.start = ies->data;
+	parse_params.len = ies->len;
+	elems = ieee802_11_parse_elems_full(&parse_params);
+	if (!elems) {
+		rcu_read_unlock();
+		return -ENOMEM;
+	}
+
+	sband = local->hw.wiphy->bands[cbss->channel->band];
+
+	*conn_flags &= ~(IEEE80211_CONN_DISABLE_40MHZ |
+			 IEEE80211_CONN_DISABLE_80P80MHZ |
+			 IEEE80211_CONN_DISABLE_160MHZ);
+
+	/* disable HT/VHT/HE if we don't support them */
+	if (!sband->ht_cap.ht_supported && !is_6ghz) {
+		mlme_dbg(sdata, "HT not supported, disabling HT/VHT/HE/EHT\n");
+		*conn_flags |= IEEE80211_CONN_DISABLE_HT;
+		*conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+		*conn_flags |= IEEE80211_CONN_DISABLE_HE;
+		*conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	if (!sband->vht_cap.vht_supported && is_5ghz) {
+		mlme_dbg(sdata, "VHT not supported, disabling VHT/HE/EHT\n");
+		*conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+		*conn_flags |= IEEE80211_CONN_DISABLE_HE;
+		*conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	if (!ieee80211_get_he_iftype_cap(sband,
+					 ieee80211_vif_type_p2p(&sdata->vif))) {
+		mlme_dbg(sdata, "HE not supported, disabling HE and EHT\n");
+		*conn_flags |= IEEE80211_CONN_DISABLE_HE;
+		*conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	if (!ieee80211_get_eht_iftype_cap(sband,
+					  ieee80211_vif_type_p2p(&sdata->vif))) {
+		mlme_dbg(sdata, "EHT not supported, disabling EHT\n");
+		*conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	if (!(*conn_flags & IEEE80211_CONN_DISABLE_HT) && !is_6ghz) {
+		ht_oper = elems->ht_operation;
+		ht_cap = elems->ht_cap_elem;
+
+		if (!ht_cap) {
+			*conn_flags |= IEEE80211_CONN_DISABLE_HT;
+			ht_oper = NULL;
+		}
+	}
+
+	if (!(*conn_flags & IEEE80211_CONN_DISABLE_VHT) && !is_6ghz) {
+		vht_oper = elems->vht_operation;
+		if (vht_oper && !ht_oper) {
+			vht_oper = NULL;
+			sdata_info(sdata,
+				   "AP advertised VHT without HT, disabling HT/VHT/HE\n");
+			*conn_flags |= IEEE80211_CONN_DISABLE_HT;
+			*conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+			*conn_flags |= IEEE80211_CONN_DISABLE_HE;
+			*conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+		}
+
+		if (!elems->vht_cap_elem) {
+			*conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+			vht_oper = NULL;
+		}
+	}
+
+	if (!(*conn_flags & IEEE80211_CONN_DISABLE_HE)) {
+		he_oper = elems->he_operation;
+
+		if (link && is_6ghz) {
+			struct ieee80211_bss_conf *bss_conf;
+			u8 j = 0;
+
+			bss_conf = link->conf;
+
+			if (elems->pwr_constr_elem)
+				bss_conf->pwr_reduction = *elems->pwr_constr_elem;
+
+			BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) !=
+				     ARRAY_SIZE(elems->tx_pwr_env));
+
+			for (i = 0; i < elems->tx_pwr_env_num; i++) {
+				if (elems->tx_pwr_env_len[i] >
+				    sizeof(bss_conf->tx_pwr_env[j]))
+					continue;
+
+				bss_conf->tx_pwr_env_num++;
+				memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i],
+				       elems->tx_pwr_env_len[i]);
+				j++;
+			}
+		}
+
+		if (!ieee80211_verify_peer_he_mcs_support(sdata, ies, he_oper) ||
+		    !ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper))
+			*conn_flags |= IEEE80211_CONN_DISABLE_HE |
+				       IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	/*
+	 * EHT requires HE to be supported as well. Specifically for 6 GHz
+	 * channels, the operation channel information can only be deduced from
+	 * both the 6 GHz operation information (from the HE operation IE) and
+	 * EHT operation.
+	 */
+	if (!(*conn_flags &
+			(IEEE80211_CONN_DISABLE_HE |
+			 IEEE80211_CONN_DISABLE_EHT)) &&
+	    he_oper) {
+		const struct cfg80211_bss_ies *cbss_ies;
+		const u8 *eht_oper_ie;
+
+		cbss_ies = rcu_dereference(cbss->ies);
+		eht_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_EHT_OPERATION,
+						   cbss_ies->data, cbss_ies->len);
+		if (eht_oper_ie && eht_oper_ie[1] >=
+		    1 + sizeof(struct ieee80211_eht_operation))
+			eht_oper = (void *)(eht_oper_ie + 3);
+		else
+			eht_oper = NULL;
+	}
+
+	/* Allow VHT if at least one channel on the sband supports 80 MHz */
+	have_80mhz = false;
+	for (i = 0; i < sband->n_channels; i++) {
+		if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
+						IEEE80211_CHAN_NO_80MHZ))
+			continue;
+
+		have_80mhz = true;
+		break;
+	}
+
+	if (!have_80mhz) {
+		sdata_info(sdata, "80 MHz not supported, disabling VHT\n");
+		*conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+	}
+
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		s1g_oper = elems->s1g_oper;
+		if (!s1g_oper)
+			sdata_info(sdata,
+				   "AP missing S1G operation element?\n");
+	}
+
+	*conn_flags |=
+		ieee80211_determine_chantype(sdata, link, *conn_flags,
+					     sband,
+					     cbss->channel,
+					     bss->vht_cap_info,
+					     ht_oper, vht_oper,
+					     he_oper, eht_oper,
+					     s1g_oper,
+					     &chandef, false);
+
+	if (link)
+		link->needed_rx_chains =
+			min(ieee80211_max_rx_chains(link, cbss),
+			    local->rx_chains);
+
+	rcu_read_unlock();
+	/* the element data was RCU protected so no longer valid anyway */
+	kfree(elems);
+	elems = NULL;
+
+	if (*conn_flags & IEEE80211_CONN_DISABLE_HE && is_6ghz) {
+		sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection");
+		return -EINVAL;
+	}
+
+	if (!link)
+		return 0;
+
+	/* will change later if needed */
+	link->smps_mode = IEEE80211_SMPS_OFF;
+
+	mutex_lock(&local->mtx);
+	/*
+	 * If this fails (possibly due to channel context sharing
+	 * on incompatible channels, e.g. 80+80 and 160 sharing the
+	 * same control channel) try to use a smaller bandwidth.
+	 */
+	ret = ieee80211_link_use_channel(link, &chandef,
+					 IEEE80211_CHANCTX_SHARED);
+
+	/* don't downgrade for 5 and 10 MHz channels, though. */
+	if (chandef.width == NL80211_CHAN_WIDTH_5 ||
+	    chandef.width == NL80211_CHAN_WIDTH_10)
+		goto out;
+
+	while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
+		*conn_flags |=
+			ieee80211_chandef_downgrade(&chandef);
+		ret = ieee80211_link_use_channel(link, &chandef,
+						 IEEE80211_CHANCTX_SHARED);
+	}
+ out:
+	mutex_unlock(&local->mtx);
+	return ret;
+}
+
+static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies,
+			       u8 *dtim_count, u8 *dtim_period)
+{
+	const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
+	const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data,
+					 ies->len);
+	const struct ieee80211_tim_ie *tim = NULL;
+	const struct ieee80211_bssid_index *idx;
+	bool valid = tim_ie && tim_ie[1] >= 2;
+
+	if (valid)
+		tim = (void *)(tim_ie + 2);
+
+	if (dtim_count)
+		*dtim_count = valid ? tim->dtim_count : 0;
+
+	if (dtim_period)
+		*dtim_period = valid ? tim->dtim_period : 0;
+
+	/* Check if value is overridden by non-transmitted profile */
+	if (!idx_ie || idx_ie[1] < 3)
+		return valid;
+
+	idx = (void *)(idx_ie + 2);
+
+	if (dtim_count)
+		*dtim_count = idx->dtim_count;
+
+	if (dtim_period)
+		*dtim_period = idx->dtim_period;
+
+	return true;
+}
+
+static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
+				    struct ieee80211_mgmt *mgmt,
+				    struct ieee802_11_elems *elems,
+				    const u8 *elem_start, unsigned int elem_len)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	struct ieee80211_local *local = sdata->local;
+	unsigned int link_id;
+	struct sta_info *sta;
+	u64 changed[IEEE80211_MLD_MAX_NUM_LINKS] = {};
+	int err;
+
+	mutex_lock(&sdata->local->sta_mtx);
+	/*
+	 * station info was already allocated and inserted before
+	 * the association and should be available to us
+	 */
+	sta = sta_info_get(sdata, assoc_data->ap_addr);
+	if (WARN_ON(!sta))
+		goto out_err;
+
+	if (sdata->vif.valid_links) {
+		u16 valid_links = 0;
+
+		for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+			if (!assoc_data->link[link_id].bss)
+				continue;
+			valid_links |= BIT(link_id);
+
+			if (link_id != assoc_data->assoc_link_id) {
+				err = ieee80211_sta_allocate_link(sta, link_id);
+				if (err)
+					goto out_err;
+			}
+		}
+
+		ieee80211_vif_set_links(sdata, valid_links);
+	}
+
+	for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+		struct ieee80211_link_data *link;
+		struct link_sta_info *link_sta;
+
+		if (!assoc_data->link[link_id].bss)
+			continue;
+
+		link = sdata_dereference(sdata->link[link_id], sdata);
+		if (WARN_ON(!link))
+			goto out_err;
+
+		if (sdata->vif.valid_links)
+			link_info(link,
+				  "local address %pM, AP link address %pM\n",
+				  link->conf->addr,
+				  assoc_data->link[link_id].bss->bssid);
+
+		link_sta = rcu_dereference_protected(sta->link[link_id],
+						     lockdep_is_held(&local->sta_mtx));
+		if (WARN_ON(!link_sta))
+			goto out_err;
+
+		if (link_id != assoc_data->assoc_link_id) {
+			struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
+			const struct cfg80211_bss_ies *ies;
+
+			rcu_read_lock();
+			ies = rcu_dereference(cbss->ies);
+			ieee80211_get_dtim(ies,
+					   &link->conf->sync_dtim_count,
+					   &link->u.mgd.dtim_period);
+			link->conf->dtim_period = link->u.mgd.dtim_period ?: 1;
+			link->conf->beacon_int = cbss->beacon_interval;
+			rcu_read_unlock();
+
+			err = ieee80211_prep_channel(sdata, link, cbss,
+						     &link->u.mgd.conn_flags);
+			if (err) {
+				link_info(link, "prep_channel failed\n");
+				goto out_err;
+			}
+		}
+
+		err = ieee80211_mgd_setup_link_sta(link, sta, link_sta,
+						   assoc_data->link[link_id].bss);
+		if (err)
+			goto out_err;
+
+		if (!ieee80211_assoc_config_link(link, link_sta,
+						 assoc_data->link[link_id].bss,
+						 mgmt, elem_start, elem_len,
+						 &changed[link_id]))
+			goto out_err;
+
+		if (link_id != assoc_data->assoc_link_id) {
+			err = ieee80211_sta_activate_link(sta, link_id);
+			if (err)
+				goto out_err;
+		}
+	}
+
+	rate_control_rate_init(sta);
+
+	if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
+		set_sta_flag(sta, WLAN_STA_MFP);
+		sta->sta.mfp = true;
+	} else {
+		sta->sta.mfp = false;
+	}
+
+	ieee80211_sta_set_max_amsdu_subframes(sta, elems->ext_capab,
+					      elems->ext_capab_len);
+
+	sta->sta.wme = (elems->wmm_param || elems->s1g_capab) &&
+		       local->hw.queues >= IEEE80211_NUM_ACS;
+
+	err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+	if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
+		err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
+	if (err) {
+		sdata_info(sdata,
+			   "failed to move station %pM to desired state\n",
+			   sta->sta.addr);
+		WARN_ON(__sta_info_destroy(sta));
+		goto out_err;
+	}
+
+	if (sdata->wdev.use_4addr)
+		drv_sta_set_4addr(local, sdata, &sta->sta, true);
+
+	mutex_unlock(&sdata->local->sta_mtx);
+
+	ieee80211_set_associated(sdata, assoc_data, changed);
+
+	/*
+	 * If we're using 4-addr mode, let the AP know that we're
+	 * doing so, so that it can create the STA VLAN on its side
+	 */
+	if (ifmgd->use_4addr)
+		ieee80211_send_4addr_nullfunc(local, sdata);
+
+	/*
+	 * Start timer to probe the connection to the AP now.
+	 * Also start the timer that will detect beacon loss.
+	 */
+	ieee80211_sta_reset_beacon_monitor(sdata);
+	ieee80211_sta_reset_conn_monitor(sdata);
+
+	return true;
+out_err:
+	eth_zero_addr(sdata->vif.cfg.ap_addr);
+	mutex_unlock(&sdata->local->sta_mtx);
+	return false;
+}
+
+static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
+					 struct ieee80211_mgmt *mgmt,
+					 size_t len)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	u16 capab_info, status_code, aid;
+	struct ieee80211_elems_parse_params parse_params = {
+		.bss = NULL,
+		.link_id = -1,
+		.from_ap = true,
+	};
+	struct ieee802_11_elems *elems;
+	int ac;
+	const u8 *elem_start;
+	unsigned int elem_len;
+	bool reassoc;
+	struct ieee80211_event event = {
+		.type = MLME_EVENT,
+		.u.mlme.data = ASSOC_EVENT,
+	};
+	struct ieee80211_prep_tx_info info = {};
+	struct cfg80211_rx_assoc_resp resp = {
+		.uapsd_queues = -1,
+	};
+	u8 ap_mld_addr[ETH_ALEN] __aligned(2);
+	unsigned int link_id;
+
+	sdata_assert_lock(sdata);
+
+	if (!assoc_data)
+		return;
+
+	if (!ether_addr_equal(assoc_data->ap_addr, mgmt->bssid) ||
+	    !ether_addr_equal(assoc_data->ap_addr, mgmt->sa))
+		return;
+
+	/*
+	 * AssocResp and ReassocResp have identical structure, so process both
+	 * of them in this function.
+	 */
+
+	if (len < 24 + 6)
+		return;
+
+	reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
+	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
+	status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
+	if (assoc_data->s1g)
+		elem_start = mgmt->u.s1g_assoc_resp.variable;
+	else
+		elem_start = mgmt->u.assoc_resp.variable;
+
+	/*
+	 * Note: this may not be perfect, AP might misbehave - if
+	 * anyone needs to rely on perfect complete notification
+	 * with the exact right subtype, then we need to track what
+	 * we actually transmitted.
+	 */
+	info.subtype = reassoc ? IEEE80211_STYPE_REASSOC_REQ :
+				 IEEE80211_STYPE_ASSOC_REQ;
+
+	if (assoc_data->fils_kek_len &&
+	    fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
+		return;
+
+	elem_len = len - (elem_start - (u8 *)mgmt);
+	parse_params.start = elem_start;
+	parse_params.len = elem_len;
+	elems = ieee802_11_parse_elems_full(&parse_params);
+	if (!elems)
+		goto notify_driver;
+
+	if (elems->aid_resp)
+		aid = le16_to_cpu(elems->aid_resp->aid);
+	else if (assoc_data->s1g)
+		aid = 0; /* TODO */
+	else
+		aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
+
+	/*
+	 * The 5 MSB of the AID field are reserved
+	 * (802.11-2016 9.4.1.8 AID field)
+	 */
+	aid &= 0x7ff;
+
+	sdata_info(sdata,
+		   "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
+		   reassoc ? "Rea" : "A", assoc_data->ap_addr,
+		   capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
+
+	ifmgd->broken_ap = false;
+
+	if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
+	    elems->timeout_int &&
+	    elems->timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
+		u32 tu, ms;
+
+		cfg80211_assoc_comeback(sdata->dev, assoc_data->ap_addr,
+					le32_to_cpu(elems->timeout_int->value));
+
+		tu = le32_to_cpu(elems->timeout_int->value);
+		ms = tu * 1024 / 1000;
+		sdata_info(sdata,
+			   "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
+			   assoc_data->ap_addr, tu, ms);
+		assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
+		assoc_data->timeout_started = true;
+		if (ms > IEEE80211_ASSOC_TIMEOUT)
+			run_again(sdata, assoc_data->timeout);
+		goto notify_driver;
+	}
+
+	if (status_code != WLAN_STATUS_SUCCESS) {
+		sdata_info(sdata, "%pM denied association (code=%d)\n",
+			   assoc_data->ap_addr, status_code);
+		event.u.mlme.status = MLME_DENIED;
+		event.u.mlme.reason = status_code;
+		drv_event_callback(sdata->local, sdata, &event);
+	} else {
+		if (aid == 0 || aid > IEEE80211_MAX_AID) {
+			sdata_info(sdata,
+				   "invalid AID value %d (out of range), turn off PS\n",
+				   aid);
+			aid = 0;
+			ifmgd->broken_ap = true;
+		}
+
+		if (sdata->vif.valid_links) {
+			if (!elems->multi_link) {
+				sdata_info(sdata,
+					   "MLO association with %pM but no multi-link element in response!\n",
+					   assoc_data->ap_addr);
+				goto abandon_assoc;
+			}
+
+			if (le16_get_bits(elems->multi_link->control,
+					  IEEE80211_ML_CONTROL_TYPE) !=
+					IEEE80211_ML_CONTROL_TYPE_BASIC) {
+				sdata_info(sdata,
+					   "bad multi-link element (control=0x%x)\n",
+					   le16_to_cpu(elems->multi_link->control));
+				goto abandon_assoc;
+			} else {
+				struct ieee80211_mle_basic_common_info *common;
+
+				common = (void *)elems->multi_link->variable;
+
+				if (memcmp(assoc_data->ap_addr,
+					   common->mld_mac_addr, ETH_ALEN)) {
+					sdata_info(sdata,
+						   "AP MLD MAC address mismatch: got %pM expected %pM\n",
+						   common->mld_mac_addr,
+						   assoc_data->ap_addr);
+					goto abandon_assoc;
+				}
+			}
+		}
+
+		sdata->vif.cfg.aid = aid;
+
+		if (!ieee80211_assoc_success(sdata, mgmt, elems,
+					     elem_start, elem_len)) {
+			/* oops -- internal error -- send timeout for now */
+			ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
+			goto notify_driver;
+		}
+		event.u.mlme.status = MLME_SUCCESS;
+		drv_event_callback(sdata->local, sdata, &event);
+		sdata_info(sdata, "associated\n");
+
+		info.success = 1;
+	}
+
+	for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+		struct ieee80211_link_data *link;
+
+		link = sdata_dereference(sdata->link[link_id], sdata);
+		if (!link)
+			continue;
+		if (!assoc_data->link[link_id].bss)
+			continue;
+		resp.links[link_id].bss = assoc_data->link[link_id].bss;
+		resp.links[link_id].addr = link->conf->addr;
+
+		/* get uapsd queues configuration - same for all links */
+		resp.uapsd_queues = 0;
+		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+			if (link->tx_conf[ac].uapsd)
+				resp.uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
+	}
+
+	if (sdata->vif.valid_links) {
+		ether_addr_copy(ap_mld_addr, sdata->vif.cfg.ap_addr);
+		resp.ap_mld_addr = ap_mld_addr;
+	}
+
+	ieee80211_destroy_assoc_data(sdata,
+				     status_code == WLAN_STATUS_SUCCESS ?
+					ASSOC_SUCCESS :
+					ASSOC_REJECTED);
+
+	resp.buf = (u8 *)mgmt;
+	resp.len = len;
+	resp.req_ies = ifmgd->assoc_req_ies;
+	resp.req_ies_len = ifmgd->assoc_req_ies_len;
+	cfg80211_rx_assoc_resp(sdata->dev, &resp);
+notify_driver:
+	drv_mgd_complete_tx(sdata->local, sdata, &info);
+	kfree(elems);
+	return;
+abandon_assoc:
+	ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
+	goto notify_driver;
+}
+
+static void ieee80211_rx_bss_info(struct ieee80211_link_data *link,
+				  struct ieee80211_mgmt *mgmt, size_t len,
+				  struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_bss *bss;
+	struct ieee80211_channel *channel;
+
+	sdata_assert_lock(sdata);
+
+	channel = ieee80211_get_channel_khz(local->hw.wiphy,
+					ieee80211_rx_status_to_khz(rx_status));
+	if (!channel)
+		return;
+
+	bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel);
+	if (bss) {
+		link->conf->beacon_rate = bss->beacon_rate;
+		ieee80211_rx_bss_put(local, bss);
+	}
+}
+
+
+static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_link_data *link,
+					 struct sk_buff *skb)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_mgmt *mgmt = (void *)skb->data;
+	struct ieee80211_if_managed *ifmgd;
+	struct ieee80211_rx_status *rx_status = (void *) skb->cb;
+	struct ieee80211_channel *channel;
+	size_t baselen, len = skb->len;
+
+	ifmgd = &sdata->u.mgd;
+
+	sdata_assert_lock(sdata);
+
+	/*
+	 * According to Draft P802.11ax D6.0 clause 26.17.2.3.2:
+	 * "If a 6 GHz AP receives a Probe Request frame  and responds with
+	 * a Probe Response frame [..], the Address 1 field of the Probe
+	 * Response frame shall be set to the broadcast address [..]"
+	 * So, on 6GHz band we should also accept broadcast responses.
+	 */
+	channel = ieee80211_get_channel(sdata->local->hw.wiphy,
+					rx_status->freq);
+	if (!channel)
+		return;
+
+	if (!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
+	    (channel->band != NL80211_BAND_6GHZ ||
+	     !is_broadcast_ether_addr(mgmt->da)))
+		return; /* ignore ProbeResp to foreign address */
+
+	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
+	if (baselen > len)
+		return;
+
+	ieee80211_rx_bss_info(link, mgmt, len, rx_status);
+
+	if (ifmgd->associated &&
+	    ether_addr_equal(mgmt->bssid, link->u.mgd.bssid))
+		ieee80211_reset_ap_probe(sdata);
+}
+
+/*
+ * This is the canonical list of information elements we care about,
+ * the filter code also gives us all changes to the Microsoft OUI
+ * (00:50:F2) vendor IE which is used for WMM which we need to track,
+ * as well as the DTPC IE (part of the Cisco OUI) used for signaling
+ * changes to requested client power.
+ *
+ * We implement beacon filtering in software since that means we can
+ * avoid processing the frame here and in cfg80211, and userspace
+ * will not be able to tell whether the hardware supports it or not.
+ *
+ * XXX: This list needs to be dynamic -- userspace needs to be able to
+ *	add items it requires. It also needs to be able to tell us to
+ *	look out for other vendor IEs.
+ */
+static const u64 care_about_ies =
+	(1ULL << WLAN_EID_COUNTRY) |
+	(1ULL << WLAN_EID_ERP_INFO) |
+	(1ULL << WLAN_EID_CHANNEL_SWITCH) |
+	(1ULL << WLAN_EID_PWR_CONSTRAINT) |
+	(1ULL << WLAN_EID_HT_CAPABILITY) |
+	(1ULL << WLAN_EID_HT_OPERATION) |
+	(1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
+
+static void ieee80211_handle_beacon_sig(struct ieee80211_link_data *link,
+					struct ieee80211_if_managed *ifmgd,
+					struct ieee80211_bss_conf *bss_conf,
+					struct ieee80211_local *local,
+					struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+
+	/* Track average RSSI from the Beacon frames of the current AP */
+
+	if (!link->u.mgd.tracking_signal_avg) {
+		link->u.mgd.tracking_signal_avg = true;
+		ewma_beacon_signal_init(&link->u.mgd.ave_beacon_signal);
+		link->u.mgd.last_cqm_event_signal = 0;
+		link->u.mgd.count_beacon_signal = 1;
+		link->u.mgd.last_ave_beacon_signal = 0;
+	} else {
+		link->u.mgd.count_beacon_signal++;
+	}
+
+	ewma_beacon_signal_add(&link->u.mgd.ave_beacon_signal,
+			       -rx_status->signal);
+
+	if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
+	    link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
+		int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
+		int last_sig = link->u.mgd.last_ave_beacon_signal;
+		struct ieee80211_event event = {
+			.type = RSSI_EVENT,
+		};
+
+		/*
+		 * if signal crosses either of the boundaries, invoke callback
+		 * with appropriate parameters
+		 */
+		if (sig > ifmgd->rssi_max_thold &&
+		    (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
+			link->u.mgd.last_ave_beacon_signal = sig;
+			event.u.rssi.data = RSSI_EVENT_HIGH;
+			drv_event_callback(local, sdata, &event);
+		} else if (sig < ifmgd->rssi_min_thold &&
+			   (last_sig >= ifmgd->rssi_max_thold ||
+			   last_sig == 0)) {
+			link->u.mgd.last_ave_beacon_signal = sig;
+			event.u.rssi.data = RSSI_EVENT_LOW;
+			drv_event_callback(local, sdata, &event);
+		}
+	}
+
+	if (bss_conf->cqm_rssi_thold &&
+	    link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
+	    !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
+		int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
+		int last_event = link->u.mgd.last_cqm_event_signal;
+		int thold = bss_conf->cqm_rssi_thold;
+		int hyst = bss_conf->cqm_rssi_hyst;
+
+		if (sig < thold &&
+		    (last_event == 0 || sig < last_event - hyst)) {
+			link->u.mgd.last_cqm_event_signal = sig;
+			ieee80211_cqm_rssi_notify(
+				&sdata->vif,
+				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+				sig, GFP_KERNEL);
+		} else if (sig > thold &&
+			   (last_event == 0 || sig > last_event + hyst)) {
+			link->u.mgd.last_cqm_event_signal = sig;
+			ieee80211_cqm_rssi_notify(
+				&sdata->vif,
+				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+				sig, GFP_KERNEL);
+		}
+	}
+
+	if (bss_conf->cqm_rssi_low &&
+	    link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
+		int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
+		int last_event = link->u.mgd.last_cqm_event_signal;
+		int low = bss_conf->cqm_rssi_low;
+		int high = bss_conf->cqm_rssi_high;
+
+		if (sig < low &&
+		    (last_event == 0 || last_event >= low)) {
+			link->u.mgd.last_cqm_event_signal = sig;
+			ieee80211_cqm_rssi_notify(
+				&sdata->vif,
+				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+				sig, GFP_KERNEL);
+		} else if (sig > high &&
+			   (last_event == 0 || last_event <= high)) {
+			link->u.mgd.last_cqm_event_signal = sig;
+			ieee80211_cqm_rssi_notify(
+				&sdata->vif,
+				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+				sig, GFP_KERNEL);
+		}
+	}
+}
+
+static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
+				    struct cfg80211_bss *bss)
+{
+	if (ether_addr_equal(tx_bssid, bss->bssid))
+		return true;
+	if (!bss->transmitted_bss)
+		return false;
+	return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
+}
+
+static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link,
+				     struct ieee80211_hdr *hdr, size_t len,
+				     struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+	struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
+	struct ieee80211_mgmt *mgmt = (void *) hdr;
+	size_t baselen;
+	struct ieee802_11_elems *elems;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_chanctx_conf *chanctx_conf;
+	struct ieee80211_channel *chan;
+	struct link_sta_info *link_sta;
+	struct sta_info *sta;
+	u32 changed = 0;
+	bool erp_valid;
+	u8 erp_value = 0;
+	u32 ncrc = 0;
+	u8 *bssid, *variable = mgmt->u.beacon.variable;
+	u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
+	struct ieee80211_elems_parse_params parse_params = {
+		.link_id = -1,
+		.from_ap = true,
+	};
+
+	sdata_assert_lock(sdata);
+
+	/* Process beacon from the current BSS */
+	bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type);
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		if (ieee80211_is_s1g_short_beacon(ext->frame_control))
+			variable = ext->u.s1g_short_beacon.variable;
+		else
+			variable = ext->u.s1g_beacon.variable;
+	}
+
+	baselen = (u8 *) variable - (u8 *) mgmt;
+	if (baselen > len)
+		return;
+
+	parse_params.start = variable;
+	parse_params.len = len - baselen;
+
+	rcu_read_lock();
+	chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
+	if (!chanctx_conf) {
+		rcu_read_unlock();
+		return;
+	}
+
+	if (ieee80211_rx_status_to_khz(rx_status) !=
+	    ieee80211_channel_to_khz(chanctx_conf->def.chan)) {
+		rcu_read_unlock();
+		return;
+	}
+	chan = chanctx_conf->def.chan;
+	rcu_read_unlock();
+
+	if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
+	    !WARN_ON(sdata->vif.valid_links) &&
+	    ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->link[0].bss)) {
+		parse_params.bss = ifmgd->assoc_data->link[0].bss;
+		elems = ieee802_11_parse_elems_full(&parse_params);
+		if (!elems)
+			return;
+
+		ieee80211_rx_bss_info(link, mgmt, len, rx_status);
+
+		if (elems->dtim_period)
+			link->u.mgd.dtim_period = elems->dtim_period;
+		link->u.mgd.have_beacon = true;
+		ifmgd->assoc_data->need_beacon = false;
+		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
+			link->conf->sync_tsf =
+				le64_to_cpu(mgmt->u.beacon.timestamp);
+			link->conf->sync_device_ts =
+				rx_status->device_timestamp;
+			link->conf->sync_dtim_count = elems->dtim_count;
+		}
+
+		if (elems->mbssid_config_ie)
+			bss_conf->profile_periodicity =
+				elems->mbssid_config_ie->profile_periodicity;
+		else
+			bss_conf->profile_periodicity = 0;
+
+		if (elems->ext_capab_len >= 11 &&
+		    (elems->ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
+			bss_conf->ema_ap = true;
+		else
+			bss_conf->ema_ap = false;
+
+		/* continue assoc process */
+		ifmgd->assoc_data->timeout = jiffies;
+		ifmgd->assoc_data->timeout_started = true;
+		run_again(sdata, ifmgd->assoc_data->timeout);
+		kfree(elems);
+		return;
+	}
+
+	if (!ifmgd->associated ||
+	    !ieee80211_rx_our_beacon(bssid, link->u.mgd.bss))
+		return;
+	bssid = link->u.mgd.bssid;
+
+	if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL))
+		ieee80211_handle_beacon_sig(link, ifmgd, bss_conf,
+					    local, rx_status);
+
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
+		mlme_dbg_ratelimited(sdata,
+				     "cancelling AP probe due to a received beacon\n");
+		ieee80211_reset_ap_probe(sdata);
+	}
+
+	/*
+	 * Push the beacon loss detection into the future since
+	 * we are processing a beacon from the AP just now.
+	 */
+	ieee80211_sta_reset_beacon_monitor(sdata);
+
+	/* TODO: CRC urrently not calculated on S1G Beacon Compatibility
+	 * element (which carries the beacon interval). Don't forget to add a
+	 * bit to care_about_ies[] above if mac80211 is interested in a
+	 * changing S1G element.
+	 */
+	if (!ieee80211_is_s1g_beacon(hdr->frame_control))
+		ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
+	parse_params.bss = link->u.mgd.bss;
+	parse_params.filter = care_about_ies;
+	parse_params.crc = ncrc;
+	elems = ieee802_11_parse_elems_full(&parse_params);
+	if (!elems)
+		return;
+	ncrc = elems->crc;
+
+	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
+	    ieee80211_check_tim(elems->tim, elems->tim_len, vif_cfg->aid)) {
+		if (local->hw.conf.dynamic_ps_timeout > 0) {
+			if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+				local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+				ieee80211_hw_config(local,
+						    IEEE80211_CONF_CHANGE_PS);
+			}
+			ieee80211_send_nullfunc(local, sdata, false);
+		} else if (!local->pspolling && sdata->u.mgd.powersave) {
+			local->pspolling = true;
+
+			/*
+			 * Here is assumed that the driver will be
+			 * able to send ps-poll frame and receive a
+			 * response even though power save mode is
+			 * enabled, but some drivers might require
+			 * to disable power save here. This needs
+			 * to be investigated.
+			 */
+			ieee80211_send_pspoll(local, sdata);
+		}
+	}
+
+	if (sdata->vif.p2p ||
+	    sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
+		struct ieee80211_p2p_noa_attr noa = {};
+		int ret;
+
+		ret = cfg80211_get_p2p_attr(variable,
+					    len - baselen,
+					    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
+					    (u8 *) &noa, sizeof(noa));
+		if (ret >= 2) {
+			if (link->u.mgd.p2p_noa_index != noa.index) {
+				/* valid noa_attr and index changed */
+				link->u.mgd.p2p_noa_index = noa.index;
+				memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
+				changed |= BSS_CHANGED_P2P_PS;
+				/*
+				 * make sure we update all information, the CRC
+				 * mechanism doesn't look at P2P attributes.
+				 */
+				link->u.mgd.beacon_crc_valid = false;
+			}
+		} else if (link->u.mgd.p2p_noa_index != -1) {
+			/* noa_attr not found and we had valid noa_attr before */
+			link->u.mgd.p2p_noa_index = -1;
+			memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
+			changed |= BSS_CHANGED_P2P_PS;
+			link->u.mgd.beacon_crc_valid = false;
+		}
+	}
+
+	if (link->u.mgd.csa_waiting_bcn)
+		ieee80211_chswitch_post_beacon(link);
+
+	/*
+	 * Update beacon timing and dtim count on every beacon appearance. This
+	 * will allow the driver to use the most updated values. Do it before
+	 * comparing this one with last received beacon.
+	 * IMPORTANT: These parameters would possibly be out of sync by the time
+	 * the driver will use them. The synchronized view is currently
+	 * guaranteed only in certain callbacks.
+	 */
+	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
+	    !ieee80211_is_s1g_beacon(hdr->frame_control)) {
+		link->conf->sync_tsf =
+			le64_to_cpu(mgmt->u.beacon.timestamp);
+		link->conf->sync_device_ts =
+			rx_status->device_timestamp;
+		link->conf->sync_dtim_count = elems->dtim_count;
+	}
+
+	if ((ncrc == link->u.mgd.beacon_crc && link->u.mgd.beacon_crc_valid) ||
+	    ieee80211_is_s1g_short_beacon(mgmt->frame_control))
+		goto free;
+	link->u.mgd.beacon_crc = ncrc;
+	link->u.mgd.beacon_crc_valid = true;
+
+	ieee80211_rx_bss_info(link, mgmt, len, rx_status);
+
+	ieee80211_sta_process_chanswitch(link, rx_status->mactime,
+					 rx_status->device_timestamp,
+					 elems, true);
+
+	if (!link->u.mgd.disable_wmm_tracking &&
+	    ieee80211_sta_wmm_params(local, link, elems->wmm_param,
+				     elems->wmm_param_len,
+				     elems->mu_edca_param_set))
+		changed |= BSS_CHANGED_QOS;
+
+	/*
+	 * If we haven't had a beacon before, tell the driver about the
+	 * DTIM period (and beacon timing if desired) now.
+	 */
+	if (!link->u.mgd.have_beacon) {
+		/* a few bogus AP send dtim_period = 0 or no TIM IE */
+		bss_conf->dtim_period = elems->dtim_period ?: 1;
+
+		changed |= BSS_CHANGED_BEACON_INFO;
+		link->u.mgd.have_beacon = true;
+
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local);
+		mutex_unlock(&local->iflist_mtx);
+
+		ieee80211_recalc_ps_vif(sdata);
+	}
+
+	if (elems->erp_info) {
+		erp_valid = true;
+		erp_value = elems->erp_info[0];
+	} else {
+		erp_valid = false;
+	}
+
+	if (!ieee80211_is_s1g_beacon(hdr->frame_control))
+		changed |= ieee80211_handle_bss_capability(link,
+				le16_to_cpu(mgmt->u.beacon.capab_info),
+				erp_valid, erp_value);
+
+	mutex_lock(&local->sta_mtx);
+	sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
+	if (WARN_ON(!sta)) {
+		mutex_unlock(&local->sta_mtx);
+		goto free;
+	}
+	link_sta = rcu_dereference_protected(sta->link[link->link_id],
+					     lockdep_is_held(&local->sta_mtx));
+	if (WARN_ON(!link_sta)) {
+		mutex_unlock(&local->sta_mtx);
+		goto free;
+	}
+
+	changed |= ieee80211_recalc_twt_req(link, link_sta, elems);
+
+	if (ieee80211_config_bw(link, elems->ht_cap_elem,
+				elems->vht_cap_elem, elems->ht_operation,
+				elems->vht_operation, elems->he_operation,
+				elems->eht_operation,
+				elems->s1g_oper, bssid, &changed)) {
+		mutex_unlock(&local->sta_mtx);
+		sdata_info(sdata,
+			   "failed to follow AP %pM bandwidth change, disconnect\n",
+			   bssid);
+		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+				       WLAN_REASON_DEAUTH_LEAVING,
+				       true, deauth_buf);
+		ieee80211_report_disconnect(sdata, deauth_buf,
+					    sizeof(deauth_buf), true,
+					    WLAN_REASON_DEAUTH_LEAVING,
+					    false);
+		goto free;
+	}
+
+	if (sta && elems->opmode_notif)
+		ieee80211_vht_handle_opmode(sdata, link_sta,
+					    *elems->opmode_notif,
+					    rx_status->band);
+	mutex_unlock(&local->sta_mtx);
+
+	changed |= ieee80211_handle_pwr_constr(link, chan, mgmt,
+					       elems->country_elem,
+					       elems->country_elem_len,
+					       elems->pwr_constr_elem,
+					       elems->cisco_dtpc_elem);
+
+	ieee80211_link_info_change_notify(sdata, link, changed);
+free:
+	kfree(elems);
+}
+
+void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb)
+{
+	struct ieee80211_link_data *link = &sdata->deflink;
+	struct ieee80211_rx_status *rx_status;
+	struct ieee80211_hdr *hdr;
+	u16 fc;
+
+	rx_status = (struct ieee80211_rx_status *) skb->cb;
+	hdr = (struct ieee80211_hdr *) skb->data;
+	fc = le16_to_cpu(hdr->frame_control);
+
+	sdata_lock(sdata);
+	switch (fc & IEEE80211_FCTL_STYPE) {
+	case IEEE80211_STYPE_S1G_BEACON:
+		ieee80211_rx_mgmt_beacon(link, hdr, skb->len, rx_status);
+		break;
+	}
+	sdata_unlock(sdata);
+}
+
+void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
+				  struct sk_buff *skb)
+{
+	struct ieee80211_link_data *link = &sdata->deflink;
+	struct ieee80211_rx_status *rx_status;
+	struct ieee80211_mgmt *mgmt;
+	u16 fc;
+	int ies_len;
+
+	rx_status = (struct ieee80211_rx_status *) skb->cb;
+	mgmt = (struct ieee80211_mgmt *) skb->data;
+	fc = le16_to_cpu(mgmt->frame_control);
+
+	sdata_lock(sdata);
+
+	if (rx_status->link_valid) {
+		link = sdata_dereference(sdata->link[rx_status->link_id],
+					 sdata);
+		if (!link)
+			goto out;
+	}
+
+	switch (fc & IEEE80211_FCTL_STYPE) {
+	case IEEE80211_STYPE_BEACON:
+		ieee80211_rx_mgmt_beacon(link, (void *)mgmt,
+					 skb->len, rx_status);
+		break;
+	case IEEE80211_STYPE_PROBE_RESP:
+		ieee80211_rx_mgmt_probe_resp(link, skb);
+		break;
+	case IEEE80211_STYPE_AUTH:
+		ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
+		break;
+	case IEEE80211_STYPE_DEAUTH:
+		ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
+		break;
+	case IEEE80211_STYPE_DISASSOC:
+		ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
+		break;
+	case IEEE80211_STYPE_ASSOC_RESP:
+	case IEEE80211_STYPE_REASSOC_RESP:
+		ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
+		break;
+	case IEEE80211_STYPE_ACTION:
+		if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
+			struct ieee802_11_elems *elems;
+
+			ies_len = skb->len -
+				  offsetof(struct ieee80211_mgmt,
+					   u.action.u.chan_switch.variable);
+
+			if (ies_len < 0)
+				break;
+
+			/* CSA IE cannot be overridden, no need for BSSID */
+			elems = ieee802_11_parse_elems(
+					mgmt->u.action.u.chan_switch.variable,
+					ies_len, true, NULL);
+
+			if (elems && !elems->parse_error)
+				ieee80211_sta_process_chanswitch(link,
+								 rx_status->mactime,
+								 rx_status->device_timestamp,
+								 elems, false);
+			kfree(elems);
+		} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
+			struct ieee802_11_elems *elems;
+
+			ies_len = skb->len -
+				  offsetof(struct ieee80211_mgmt,
+					   u.action.u.ext_chan_switch.variable);
+
+			if (ies_len < 0)
+				break;
+
+			/*
+			 * extended CSA IE can't be overridden, no need for
+			 * BSSID
+			 */
+			elems = ieee802_11_parse_elems(
+					mgmt->u.action.u.ext_chan_switch.variable,
+					ies_len, true, NULL);
+
+			if (elems && !elems->parse_error) {
+				/* for the handling code pretend it was an IE */
+				elems->ext_chansw_ie =
+					&mgmt->u.action.u.ext_chan_switch.data;
+
+				ieee80211_sta_process_chanswitch(link,
+								 rx_status->mactime,
+								 rx_status->device_timestamp,
+								 elems, false);
+			}
+
+			kfree(elems);
+		}
+		break;
+	}
+out:
+	sdata_unlock(sdata);
+}
+
+static void ieee80211_sta_timer(struct timer_list *t)
+{
+	struct ieee80211_sub_if_data *sdata =
+		from_timer(sdata, t, u.mgd.timer);
+
+	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+}
+
+void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
+				   u8 reason, bool tx)
+{
+	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+
+	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
+			       tx, frame_buf);
+
+	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
+				    reason, false);
+}
+
+static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
+	u32 tx_flags = 0;
+	u16 trans = 1;
+	u16 status = 0;
+	struct ieee80211_prep_tx_info info = {
+		.subtype = IEEE80211_STYPE_AUTH,
+	};
+
+	sdata_assert_lock(sdata);
+
+	if (WARN_ON_ONCE(!auth_data))
+		return -EINVAL;
+
+	auth_data->tries++;
+
+	if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
+		sdata_info(sdata, "authentication with %pM timed out\n",
+			   auth_data->ap_addr);
+
+		/*
+		 * Most likely AP is not in the range so remove the
+		 * bss struct for that AP.
+		 */
+		cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
+
+		return -ETIMEDOUT;
+	}
+
+	if (auth_data->algorithm == WLAN_AUTH_SAE)
+		info.duration = jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE);
+
+	drv_mgd_prepare_tx(local, sdata, &info);
+
+	sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
+		   auth_data->ap_addr, auth_data->tries,
+		   IEEE80211_AUTH_MAX_TRIES);
+
+	auth_data->expected_transaction = 2;
+
+	if (auth_data->algorithm == WLAN_AUTH_SAE) {
+		trans = auth_data->sae_trans;
+		status = auth_data->sae_status;
+		auth_data->expected_transaction = trans;
+	}
+
+	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
+		tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
+			   IEEE80211_TX_INTFL_MLME_CONN_TX;
+
+	ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
+			    auth_data->data, auth_data->data_len,
+			    auth_data->ap_addr, auth_data->ap_addr,
+			    NULL, 0, 0, tx_flags);
+
+	if (tx_flags == 0) {
+		if (auth_data->algorithm == WLAN_AUTH_SAE)
+			auth_data->timeout = jiffies +
+				IEEE80211_AUTH_TIMEOUT_SAE;
+		else
+			auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+	} else {
+		auth_data->timeout =
+			round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
+	}
+
+	auth_data->timeout_started = true;
+	run_again(sdata, auth_data->timeout);
+
+	return 0;
+}
+
+static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
+	struct ieee80211_local *local = sdata->local;
+	int ret;
+
+	sdata_assert_lock(sdata);
+
+	assoc_data->tries++;
+	if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
+		sdata_info(sdata, "association with %pM timed out\n",
+			   assoc_data->ap_addr);
+
+		/*
+		 * Most likely AP is not in the range so remove the
+		 * bss struct for that AP.
+		 */
+		cfg80211_unlink_bss(local->hw.wiphy,
+				    assoc_data->link[assoc_data->assoc_link_id].bss);
+
+		return -ETIMEDOUT;
+	}
+
+	sdata_info(sdata, "associate with %pM (try %d/%d)\n",
+		   assoc_data->ap_addr, assoc_data->tries,
+		   IEEE80211_ASSOC_MAX_TRIES);
+	ret = ieee80211_send_assoc(sdata);
+	if (ret)
+		return ret;
+
+	if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
+		assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
+		assoc_data->timeout_started = true;
+		run_again(sdata, assoc_data->timeout);
+	} else {
+		assoc_data->timeout =
+			round_jiffies_up(jiffies +
+					 IEEE80211_ASSOC_TIMEOUT_LONG);
+		assoc_data->timeout_started = true;
+		run_again(sdata, assoc_data->timeout);
+	}
+
+	return 0;
+}
+
+void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
+				  __le16 fc, bool acked)
+{
+	struct ieee80211_local *local = sdata->local;
+
+	sdata->u.mgd.status_fc = fc;
+	sdata->u.mgd.status_acked = acked;
+	sdata->u.mgd.status_received = true;
+
+	ieee80211_queue_work(&local->hw, &sdata->work);
+}
+
+void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	sdata_lock(sdata);
+
+	if (ifmgd->status_received) {
+		__le16 fc = ifmgd->status_fc;
+		bool status_acked = ifmgd->status_acked;
+
+		ifmgd->status_received = false;
+		if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
+			if (status_acked) {
+				if (ifmgd->auth_data->algorithm ==
+				    WLAN_AUTH_SAE)
+					ifmgd->auth_data->timeout =
+						jiffies +
+						IEEE80211_AUTH_TIMEOUT_SAE;
+				else
+					ifmgd->auth_data->timeout =
+						jiffies +
+						IEEE80211_AUTH_TIMEOUT_SHORT;
+				run_again(sdata, ifmgd->auth_data->timeout);
+			} else {
+				ifmgd->auth_data->timeout = jiffies - 1;
+			}
+			ifmgd->auth_data->timeout_started = true;
+		} else if (ifmgd->assoc_data &&
+			   (ieee80211_is_assoc_req(fc) ||
+			    ieee80211_is_reassoc_req(fc))) {
+			if (status_acked) {
+				ifmgd->assoc_data->timeout =
+					jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
+				run_again(sdata, ifmgd->assoc_data->timeout);
+			} else {
+				ifmgd->assoc_data->timeout = jiffies - 1;
+			}
+			ifmgd->assoc_data->timeout_started = true;
+		}
+	}
+
+	if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
+	    time_after(jiffies, ifmgd->auth_data->timeout)) {
+		if (ifmgd->auth_data->done || ifmgd->auth_data->waiting) {
+			/*
+			 * ok ... we waited for assoc or continuation but
+			 * userspace didn't do it, so kill the auth data
+			 */
+			ieee80211_destroy_auth_data(sdata, false);
+		} else if (ieee80211_auth(sdata)) {
+			u8 ap_addr[ETH_ALEN];
+			struct ieee80211_event event = {
+				.type = MLME_EVENT,
+				.u.mlme.data = AUTH_EVENT,
+				.u.mlme.status = MLME_TIMEOUT,
+			};
+
+			memcpy(ap_addr, ifmgd->auth_data->ap_addr, ETH_ALEN);
+
+			ieee80211_destroy_auth_data(sdata, false);
+
+			cfg80211_auth_timeout(sdata->dev, ap_addr);
+			drv_event_callback(sdata->local, sdata, &event);
+		}
+	} else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
+		run_again(sdata, ifmgd->auth_data->timeout);
+
+	if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
+	    time_after(jiffies, ifmgd->assoc_data->timeout)) {
+		if ((ifmgd->assoc_data->need_beacon &&
+		     !sdata->deflink.u.mgd.have_beacon) ||
+		    ieee80211_do_assoc(sdata)) {
+			struct ieee80211_event event = {
+				.type = MLME_EVENT,
+				.u.mlme.data = ASSOC_EVENT,
+				.u.mlme.status = MLME_TIMEOUT,
+			};
+
+			ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
+			drv_event_callback(sdata->local, sdata, &event);
+		}
+	} else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
+		run_again(sdata, ifmgd->assoc_data->timeout);
+
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
+	    ifmgd->associated) {
+		u8 *bssid = sdata->deflink.u.mgd.bssid;
+		int max_tries;
+
+		if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
+			max_tries = max_nullfunc_tries;
+		else
+			max_tries = max_probe_tries;
+
+		/* ACK received for nullfunc probing frame */
+		if (!ifmgd->probe_send_count)
+			ieee80211_reset_ap_probe(sdata);
+		else if (ifmgd->nullfunc_failed) {
+			if (ifmgd->probe_send_count < max_tries) {
+				mlme_dbg(sdata,
+					 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
+					 bssid, ifmgd->probe_send_count,
+					 max_tries);
+				ieee80211_mgd_probe_ap_send(sdata);
+			} else {
+				mlme_dbg(sdata,
+					 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
+					 bssid);
+				ieee80211_sta_connection_lost(sdata,
+					WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+					false);
+			}
+		} else if (time_is_after_jiffies(ifmgd->probe_timeout))
+			run_again(sdata, ifmgd->probe_timeout);
+		else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
+			mlme_dbg(sdata,
+				 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
+				 bssid, probe_wait_ms);
+			ieee80211_sta_connection_lost(sdata,
+				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
+		} else if (ifmgd->probe_send_count < max_tries) {
+			mlme_dbg(sdata,
+				 "No probe response from AP %pM after %dms, try %d/%i\n",
+				 bssid, probe_wait_ms,
+				 ifmgd->probe_send_count, max_tries);
+			ieee80211_mgd_probe_ap_send(sdata);
+		} else {
+			/*
+			 * We actually lost the connection ... or did we?
+			 * Let's make sure!
+			 */
+			mlme_dbg(sdata,
+				 "No probe response from AP %pM after %dms, disconnecting.\n",
+				 bssid, probe_wait_ms);
+
+			ieee80211_sta_connection_lost(sdata,
+				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
+		}
+	}
+
+	sdata_unlock(sdata);
+}
+
+static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
+{
+	struct ieee80211_sub_if_data *sdata =
+		from_timer(sdata, t, u.mgd.bcn_mon_timer);
+
+	if (WARN_ON(sdata->vif.valid_links))
+		return;
+
+	if (sdata->vif.bss_conf.csa_active &&
+	    !sdata->deflink.u.mgd.csa_waiting_bcn)
+		return;
+
+	if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
+		return;
+
+	sdata->u.mgd.connection_loss = false;
+	ieee80211_queue_work(&sdata->local->hw,
+			     &sdata->u.mgd.beacon_connection_loss_work);
+}
+
+static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
+{
+	struct ieee80211_sub_if_data *sdata =
+		from_timer(sdata, t, u.mgd.conn_mon_timer);
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	unsigned long timeout;
+
+	if (WARN_ON(sdata->vif.valid_links))
+		return;
+
+	if (sdata->vif.bss_conf.csa_active &&
+	    !sdata->deflink.u.mgd.csa_waiting_bcn)
+		return;
+
+	sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
+	if (!sta)
+		return;
+
+	timeout = sta->deflink.status_stats.last_ack;
+	if (time_before(sta->deflink.status_stats.last_ack, sta->deflink.rx_stats.last_rx))
+		timeout = sta->deflink.rx_stats.last_rx;
+	timeout += IEEE80211_CONNECTION_IDLE_TIME;
+
+	/* If timeout is after now, then update timer to fire at
+	 * the later date, but do not actually probe at this time.
+	 */
+	if (time_is_after_jiffies(timeout)) {
+		mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout));
+		return;
+	}
+
+	ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
+}
+
+static void ieee80211_sta_monitor_work(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata =
+		container_of(work, struct ieee80211_sub_if_data,
+			     u.mgd.monitor_work);
+
+	ieee80211_mgd_probe_ap(sdata, false);
+}
+
+static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
+{
+	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+		__ieee80211_stop_poll(sdata);
+
+		/* let's probe the connection once */
+		if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
+			ieee80211_queue_work(&sdata->local->hw,
+					     &sdata->u.mgd.monitor_work);
+	}
+}
+
+#ifdef CONFIG_PM
+void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+
+	sdata_lock(sdata);
+
+	if (ifmgd->auth_data || ifmgd->assoc_data) {
+		const u8 *ap_addr = ifmgd->auth_data ?
+				ifmgd->auth_data->ap_addr :
+				ifmgd->assoc_data->ap_addr;
+
+		/*
+		 * If we are trying to authenticate / associate while suspending,
+		 * cfg80211 won't know and won't actually abort those attempts,
+		 * thus we need to do that ourselves.
+		 */
+		ieee80211_send_deauth_disassoc(sdata, ap_addr, ap_addr,
+					       IEEE80211_STYPE_DEAUTH,
+					       WLAN_REASON_DEAUTH_LEAVING,
+					       false, frame_buf);
+		if (ifmgd->assoc_data)
+			ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
+		if (ifmgd->auth_data)
+			ieee80211_destroy_auth_data(sdata, false);
+		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
+				      IEEE80211_DEAUTH_FRAME_LEN,
+				      false);
+	}
+
+	/* This is a bit of a hack - we should find a better and more generic
+	 * solution to this. Normally when suspending, cfg80211 will in fact
+	 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
+	 * auth (not so important) or assoc (this is the problem) process.
+	 *
+	 * As a consequence, it can happen that we are in the process of both
+	 * associating and suspending, and receive an association response
+	 * after cfg80211 has checked if it needs to disconnect, but before
+	 * we actually set the flag to drop incoming frames. This will then
+	 * cause the workqueue flush to process the association response in
+	 * the suspend, resulting in a successful association just before it
+	 * tries to remove the interface from the driver, which now though
+	 * has a channel context assigned ... this results in issues.
+	 *
+	 * To work around this (for now) simply deauth here again if we're
+	 * now connected.
+	 */
+	if (ifmgd->associated && !sdata->local->wowlan) {
+		u8 bssid[ETH_ALEN];
+		struct cfg80211_deauth_request req = {
+			.reason_code = WLAN_REASON_DEAUTH_LEAVING,
+			.bssid = bssid,
+		};
+
+		memcpy(bssid, sdata->vif.cfg.ap_addr, ETH_ALEN);
+		ieee80211_mgd_deauth(sdata, &req);
+	}
+
+	sdata_unlock(sdata);
+}
+#endif
+
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	sdata_lock(sdata);
+	if (!ifmgd->associated) {
+		sdata_unlock(sdata);
+		return;
+	}
+
+	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
+		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
+		mlme_dbg(sdata, "driver requested disconnect after resume\n");
+		ieee80211_sta_connection_lost(sdata,
+					      WLAN_REASON_UNSPECIFIED,
+					      true);
+		sdata_unlock(sdata);
+		return;
+	}
+
+	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) {
+		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART;
+		mlme_dbg(sdata, "driver requested disconnect after hardware restart\n");
+		ieee80211_sta_connection_lost(sdata,
+					      WLAN_REASON_UNSPECIFIED,
+					      true);
+		sdata_unlock(sdata);
+		return;
+	}
+
+	sdata_unlock(sdata);
+}
+
+static void ieee80211_request_smps_mgd_work(struct work_struct *work)
+{
+	struct ieee80211_link_data *link =
+		container_of(work, struct ieee80211_link_data,
+			     u.mgd.request_smps_work);
+
+	sdata_lock(link->sdata);
+	__ieee80211_request_smps_mgd(link->sdata, link,
+				     link->u.mgd.driver_smps_mode);
+	sdata_unlock(link->sdata);
+}
+
+/* interface setup */
+void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
+	INIT_WORK(&ifmgd->beacon_connection_loss_work,
+		  ieee80211_beacon_connection_loss_work);
+	INIT_WORK(&ifmgd->csa_connection_drop_work,
+		  ieee80211_csa_connection_drop_work);
+	INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
+			  ieee80211_tdls_peer_del_work);
+	timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
+	timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
+	timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
+	INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
+			  ieee80211_sta_handle_tspec_ac_params_wk);
+
+	ifmgd->flags = 0;
+	ifmgd->powersave = sdata->wdev.ps;
+	ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
+	ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
+	/* Setup TDLS data */
+	spin_lock_init(&ifmgd->teardown_lock);
+	ifmgd->teardown_skb = NULL;
+	ifmgd->orig_teardown_skb = NULL;
+}
+
+void ieee80211_mgd_setup_link(struct ieee80211_link_data *link)
+{
+	struct ieee80211_sub_if_data *sdata = link->sdata;
+	struct ieee80211_local *local = sdata->local;
+	unsigned int link_id = link->link_id;
+
+	link->u.mgd.p2p_noa_index = -1;
+	link->u.mgd.conn_flags = 0;
+	link->conf->bssid = link->u.mgd.bssid;
+
+	INIT_WORK(&link->u.mgd.request_smps_work,
+		  ieee80211_request_smps_mgd_work);
+	if (local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
+		link->u.mgd.req_smps = IEEE80211_SMPS_AUTOMATIC;
+	else
+		link->u.mgd.req_smps = IEEE80211_SMPS_OFF;
+
+	INIT_WORK(&link->u.mgd.chswitch_work, ieee80211_chswitch_work);
+	timer_setup(&link->u.mgd.chswitch_timer, ieee80211_chswitch_timer, 0);
+
+	if (sdata->u.mgd.assoc_data)
+		ether_addr_copy(link->conf->addr,
+				sdata->u.mgd.assoc_data->link[link_id].addr);
+	else if (!is_valid_ether_addr(link->conf->addr))
+		eth_random_addr(link->conf->addr);
+}
+
+/* scan finished notification */
+void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	/* Restart STA timers */
+	rcu_read_lock();
+	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+		if (ieee80211_sdata_running(sdata))
+			ieee80211_restart_sta_timer(sdata);
+	}
+	rcu_read_unlock();
+}
+
+static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
+				     struct cfg80211_bss *cbss, s8 link_id,
+				     const u8 *ap_mld_addr, bool assoc,
+				     bool override)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_bss *bss = (void *)cbss->priv;
+	struct sta_info *new_sta = NULL;
+	struct ieee80211_link_data *link;
+	bool have_sta = false;
+	bool mlo;
+	int err;
+
+	if (link_id >= 0) {
+		mlo = true;
+		if (WARN_ON(!ap_mld_addr))
+			return -EINVAL;
+		err = ieee80211_vif_set_links(sdata, BIT(link_id));
+	} else {
+		if (WARN_ON(ap_mld_addr))
+			return -EINVAL;
+		ap_mld_addr = cbss->bssid;
+		err = ieee80211_vif_set_links(sdata, 0);
+		link_id = 0;
+		mlo = false;
+	}
+
+	if (err)
+		return err;
+
+	link = sdata_dereference(sdata->link[link_id], sdata);
+	if (WARN_ON(!link)) {
+		err = -ENOLINK;
+		goto out_err;
+	}
+
+	if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) {
+		err = -EINVAL;
+		goto out_err;
+	}
+
+	/* If a reconfig is happening, bail out */
+	if (local->in_reconfig) {
+		err = -EBUSY;
+		goto out_err;
+	}
+
+	if (assoc) {
+		rcu_read_lock();
+		have_sta = sta_info_get(sdata, ap_mld_addr);
+		rcu_read_unlock();
+	}
+
+	if (!have_sta) {
+		if (mlo)
+			new_sta = sta_info_alloc_with_link(sdata, ap_mld_addr,
+							   link_id, cbss->bssid,
+							   GFP_KERNEL);
+		else
+			new_sta = sta_info_alloc(sdata, ap_mld_addr, GFP_KERNEL);
+
+		if (!new_sta) {
+			err = -ENOMEM;
+			goto out_err;
+		}
+
+		new_sta->sta.mlo = mlo;
+	}
+
+	/*
+	 * Set up the information for the new channel before setting the
+	 * new channel. We can't - completely race-free - change the basic
+	 * rates bitmap and the channel (sband) that it refers to, but if
+	 * we set it up before we at least avoid calling into the driver's
+	 * bss_info_changed() method with invalid information (since we do
+	 * call that from changing the channel - only for IDLE and perhaps
+	 * some others, but ...).
+	 *
+	 * So to avoid that, just set up all the new information before the
+	 * channel, but tell the driver to apply it only afterwards, since
+	 * it might need the new channel for that.
+	 */
+	if (new_sta) {
+		const struct cfg80211_bss_ies *ies;
+		struct link_sta_info *link_sta;
+
+		rcu_read_lock();
+		link_sta = rcu_dereference(new_sta->link[link_id]);
+		if (WARN_ON(!link_sta)) {
+			rcu_read_unlock();
+			sta_info_free(local, new_sta);
+			err = -EINVAL;
+			goto out_err;
+		}
+
+		err = ieee80211_mgd_setup_link_sta(link, new_sta,
+						   link_sta, cbss);
+		if (err) {
+			rcu_read_unlock();
+			sta_info_free(local, new_sta);
+			goto out_err;
+		}
+
+		memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN);
+
+		/* set timing information */
+		link->conf->beacon_int = cbss->beacon_interval;
+		ies = rcu_dereference(cbss->beacon_ies);
+		if (ies) {
+			link->conf->sync_tsf = ies->tsf;
+			link->conf->sync_device_ts =
+				bss->device_ts_beacon;
+
+			ieee80211_get_dtim(ies,
+					   &link->conf->sync_dtim_count,
+					   NULL);
+		} else if (!ieee80211_hw_check(&sdata->local->hw,
+					       TIMING_BEACON_ONLY)) {
+			ies = rcu_dereference(cbss->proberesp_ies);
+			/* must be non-NULL since beacon IEs were NULL */
+			link->conf->sync_tsf = ies->tsf;
+			link->conf->sync_device_ts =
+				bss->device_ts_presp;
+			link->conf->sync_dtim_count = 0;
+		} else {
+			link->conf->sync_tsf = 0;
+			link->conf->sync_device_ts = 0;
+			link->conf->sync_dtim_count = 0;
+		}
+		rcu_read_unlock();
+	}
+
+	if (new_sta || override) {
+		err = ieee80211_prep_channel(sdata, link, cbss,
+					     &link->u.mgd.conn_flags);
+		if (err) {
+			if (new_sta)
+				sta_info_free(local, new_sta);
+			goto out_err;
+		}
+	}
+
+	if (new_sta) {
+		/*
+		 * tell driver about BSSID, basic rates and timing
+		 * this was set up above, before setting the channel
+		 */
+		ieee80211_link_info_change_notify(sdata, link,
+						  BSS_CHANGED_BSSID |
+						  BSS_CHANGED_BASIC_RATES |
+						  BSS_CHANGED_BEACON_INT);
+
+		if (assoc)
+			sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
+
+		err = sta_info_insert(new_sta);
+		new_sta = NULL;
+		if (err) {
+			sdata_info(sdata,
+				   "failed to insert STA entry for the AP (error %d)\n",
+				   err);
+			goto out_err;
+		}
+	} else
+		WARN_ON_ONCE(!ether_addr_equal(link->u.mgd.bssid, cbss->bssid));
+
+	/* Cancel scan to ensure that nothing interferes with connection */
+	if (local->scanning)
+		ieee80211_scan_cancel(local);
+
+	return 0;
+
+out_err:
+	ieee80211_link_release_channel(&sdata->deflink);
+	ieee80211_vif_set_links(sdata, 0);
+	return err;
+}
+
+/* config hooks */
+int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
+		       struct cfg80211_auth_request *req)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_auth_data *auth_data;
+	u16 auth_alg;
+	int err;
+	bool cont_auth;
+
+	/* prepare auth data structure */
+
+	switch (req->auth_type) {
+	case NL80211_AUTHTYPE_OPEN_SYSTEM:
+		auth_alg = WLAN_AUTH_OPEN;
+		break;
+	case NL80211_AUTHTYPE_SHARED_KEY:
+		if (fips_enabled)
+			return -EOPNOTSUPP;
+		auth_alg = WLAN_AUTH_SHARED_KEY;
+		break;
+	case NL80211_AUTHTYPE_FT:
+		auth_alg = WLAN_AUTH_FT;
+		break;
+	case NL80211_AUTHTYPE_NETWORK_EAP:
+		auth_alg = WLAN_AUTH_LEAP;
+		break;
+	case NL80211_AUTHTYPE_SAE:
+		auth_alg = WLAN_AUTH_SAE;
+		break;
+	case NL80211_AUTHTYPE_FILS_SK:
+		auth_alg = WLAN_AUTH_FILS_SK;
+		break;
+	case NL80211_AUTHTYPE_FILS_SK_PFS:
+		auth_alg = WLAN_AUTH_FILS_SK_PFS;
+		break;
+	case NL80211_AUTHTYPE_FILS_PK:
+		auth_alg = WLAN_AUTH_FILS_PK;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (ifmgd->assoc_data)
+		return -EBUSY;
+
+	auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
+			    req->ie_len, GFP_KERNEL);
+	if (!auth_data)
+		return -ENOMEM;
+
+	memcpy(auth_data->ap_addr,
+	       req->ap_mld_addr ?: req->bss->bssid,
+	       ETH_ALEN);
+	auth_data->bss = req->bss;
+	auth_data->link_id = req->link_id;
+
+	if (req->auth_data_len >= 4) {
+		if (req->auth_type == NL80211_AUTHTYPE_SAE) {
+			__le16 *pos = (__le16 *) req->auth_data;
+
+			auth_data->sae_trans = le16_to_cpu(pos[0]);
+			auth_data->sae_status = le16_to_cpu(pos[1]);
+		}
+		memcpy(auth_data->data, req->auth_data + 4,
+		       req->auth_data_len - 4);
+		auth_data->data_len += req->auth_data_len - 4;
+	}
+
+	/* Check if continuing authentication or trying to authenticate with the
+	 * same BSS that we were in the process of authenticating with and avoid
+	 * removal and re-addition of the STA entry in
+	 * ieee80211_prep_connection().
+	 */
+	cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss &&
+		    ifmgd->auth_data->link_id == req->link_id;
+
+	if (req->ie && req->ie_len) {
+		memcpy(&auth_data->data[auth_data->data_len],
+		       req->ie, req->ie_len);
+		auth_data->data_len += req->ie_len;
+	}
+
+	if (req->key && req->key_len) {
+		auth_data->key_len = req->key_len;
+		auth_data->key_idx = req->key_idx;
+		memcpy(auth_data->key, req->key, req->key_len);
+	}
+
+	auth_data->algorithm = auth_alg;
+
+	/* try to authenticate/probe */
+
+	if (ifmgd->auth_data) {
+		if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) {
+			auth_data->peer_confirmed =
+				ifmgd->auth_data->peer_confirmed;
+		}
+		ieee80211_destroy_auth_data(sdata, cont_auth);
+	}
+
+	/* prep auth_data so we don't go into idle on disassoc */
+	ifmgd->auth_data = auth_data;
+
+	/* If this is continuation of an ongoing SAE authentication exchange
+	 * (i.e., request to send SAE Confirm) and the peer has already
+	 * confirmed, mark authentication completed since we are about to send
+	 * out SAE Confirm.
+	 */
+	if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE &&
+	    auth_data->peer_confirmed && auth_data->sae_trans == 2)
+		ieee80211_mark_sta_auth(sdata);
+
+	if (ifmgd->associated) {
+		u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+
+		sdata_info(sdata,
+			   "disconnect from AP %pM for new auth to %pM\n",
+			   sdata->vif.cfg.ap_addr, auth_data->ap_addr);
+		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+				       WLAN_REASON_UNSPECIFIED,
+				       false, frame_buf);
+
+		ieee80211_report_disconnect(sdata, frame_buf,
+					    sizeof(frame_buf), true,
+					    WLAN_REASON_UNSPECIFIED,
+					    false);
+	}
+
+	sdata_info(sdata, "authenticate with %pM\n", auth_data->ap_addr);
+
+	/* needed for transmitting the auth frame(s) properly */
+	memcpy(sdata->vif.cfg.ap_addr, auth_data->ap_addr, ETH_ALEN);
+
+	err = ieee80211_prep_connection(sdata, req->bss, req->link_id,
+					req->ap_mld_addr, cont_auth, false);
+	if (err)
+		goto err_clear;
+
+	err = ieee80211_auth(sdata);
+	if (err) {
+		sta_info_destroy_addr(sdata, auth_data->ap_addr);
+		goto err_clear;
+	}
+
+	/* hold our own reference */
+	cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
+	return 0;
+
+ err_clear:
+	if (!sdata->vif.valid_links) {
+		eth_zero_addr(sdata->deflink.u.mgd.bssid);
+		ieee80211_link_info_change_notify(sdata, &sdata->deflink,
+						  BSS_CHANGED_BSSID);
+		mutex_lock(&sdata->local->mtx);
+		ieee80211_link_release_channel(&sdata->deflink);
+		mutex_unlock(&sdata->local->mtx);
+	}
+	ifmgd->auth_data = NULL;
+	kfree(auth_data);
+	return err;
+}
+
+static ieee80211_conn_flags_t
+ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata,
+			   struct ieee80211_mgd_assoc_data *assoc_data,
+			   struct cfg80211_assoc_request *req,
+			   ieee80211_conn_flags_t conn_flags,
+			   unsigned int link_id)
+{
+	struct ieee80211_local *local = sdata->local;
+	const struct cfg80211_bss_ies *beacon_ies;
+	struct ieee80211_supported_band *sband;
+	const struct element *ht_elem, *vht_elem;
+	struct ieee80211_link_data *link;
+	struct cfg80211_bss *cbss;
+	struct ieee80211_bss *bss;
+	bool is_5ghz, is_6ghz;
+
+	cbss = assoc_data->link[link_id].bss;
+	if (WARN_ON(!cbss))
+		return 0;
+
+	bss = (void *)cbss->priv;
+
+	sband = local->hw.wiphy->bands[cbss->channel->band];
+	if (WARN_ON(!sband))
+		return 0;
+
+	link = sdata_dereference(sdata->link[link_id], sdata);
+	if (WARN_ON(!link))
+		return 0;
+
+	is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
+	is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
+
+	/* for MLO connections assume advertising all rates is OK */
+	if (!req->ap_mld_addr) {
+		assoc_data->supp_rates = bss->supp_rates;
+		assoc_data->supp_rates_len = bss->supp_rates_len;
+	}
+
+	/* copy and link elems for the STA profile */
+	if (req->links[link_id].elems_len) {
+		memcpy(assoc_data->ie_pos, req->links[link_id].elems,
+		       req->links[link_id].elems_len);
+		assoc_data->link[link_id].elems = assoc_data->ie_pos;
+		assoc_data->link[link_id].elems_len = req->links[link_id].elems_len;
+		assoc_data->ie_pos += req->links[link_id].elems_len;
+	}
+
+	rcu_read_lock();
+	ht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION);
+	if (ht_elem && ht_elem->datalen >= sizeof(struct ieee80211_ht_operation))
+		assoc_data->link[link_id].ap_ht_param =
+			((struct ieee80211_ht_operation *)(ht_elem->data))->ht_param;
+	else if (!is_6ghz)
+		conn_flags |= IEEE80211_CONN_DISABLE_HT;
+	vht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY);
+	if (vht_elem && vht_elem->datalen >= sizeof(struct ieee80211_vht_cap)) {
+		memcpy(&assoc_data->link[link_id].ap_vht_cap, vht_elem->data,
+		       sizeof(struct ieee80211_vht_cap));
+	} else if (is_5ghz) {
+		link_info(link,
+			  "VHT capa missing/short, disabling VHT/HE/EHT\n");
+		conn_flags |= IEEE80211_CONN_DISABLE_VHT |
+			      IEEE80211_CONN_DISABLE_HE |
+			      IEEE80211_CONN_DISABLE_EHT;
+	}
+	rcu_read_unlock();
+
+	link->u.mgd.beacon_crc_valid = false;
+	link->u.mgd.dtim_period = 0;
+	link->u.mgd.have_beacon = false;
+
+	/* override HT/VHT configuration only if the AP and we support it */
+	if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) {
+		struct ieee80211_sta_ht_cap sta_ht_cap;
+
+		memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
+		ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
+	}
+
+	rcu_read_lock();
+	beacon_ies = rcu_dereference(cbss->beacon_ies);
+	if (beacon_ies) {
+		const struct element *elem;
+		u8 dtim_count = 0;
+
+		ieee80211_get_dtim(beacon_ies, &dtim_count,
+				   &link->u.mgd.dtim_period);
+
+		sdata->deflink.u.mgd.have_beacon = true;
+
+		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
+			link->conf->sync_tsf = beacon_ies->tsf;
+			link->conf->sync_device_ts = bss->device_ts_beacon;
+			link->conf->sync_dtim_count = dtim_count;
+		}
+
+		elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION,
+					      beacon_ies->data, beacon_ies->len);
+		if (elem && elem->datalen >= 3)
+			link->conf->profile_periodicity = elem->data[2];
+		else
+			link->conf->profile_periodicity = 0;
+
+		elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
+					  beacon_ies->data, beacon_ies->len);
+		if (elem && elem->datalen >= 11 &&
+		    (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
+			link->conf->ema_ap = true;
+		else
+			link->conf->ema_ap = false;
+	}
+	rcu_read_unlock();
+
+	if (bss->corrupt_data) {
+		char *corrupt_type = "data";
+
+		if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
+			if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
+				corrupt_type = "beacon and probe response";
+			else
+				corrupt_type = "beacon";
+		} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) {
+			corrupt_type = "probe response";
+		}
+		sdata_info(sdata, "associating to AP %pM with corrupt %s\n",
+			   cbss->bssid, corrupt_type);
+	}
+
+	if (link->u.mgd.req_smps == IEEE80211_SMPS_AUTOMATIC) {
+		if (sdata->u.mgd.powersave)
+			link->smps_mode = IEEE80211_SMPS_DYNAMIC;
+		else
+			link->smps_mode = IEEE80211_SMPS_OFF;
+	} else {
+		link->smps_mode = link->u.mgd.req_smps;
+	}
+
+	return conn_flags;
+}
+
+int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
+			struct cfg80211_assoc_request *req)
+{
+	unsigned int assoc_link_id = req->link_id < 0 ? 0 : req->link_id;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_mgd_assoc_data *assoc_data;
+	const struct element *ssid_elem;
+	struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
+	ieee80211_conn_flags_t conn_flags = 0;
+	struct ieee80211_link_data *link;
+	struct cfg80211_bss *cbss;
+	struct ieee80211_bss *bss;
+	bool override;
+	int i, err;
+	size_t size = sizeof(*assoc_data) + req->ie_len;
+
+	for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++)
+		size += req->links[i].elems_len;
+
+	/* FIXME: no support for 4-addr MLO yet */
+	if (sdata->u.mgd.use_4addr && req->link_id >= 0)
+		return -EOPNOTSUPP;
+
+	assoc_data = kzalloc(size, GFP_KERNEL);
+	if (!assoc_data)
+		return -ENOMEM;
+
+	cbss = req->link_id < 0 ? req->bss : req->links[req->link_id].bss;
+
+	rcu_read_lock();
+	ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID);
+	if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) {
+		rcu_read_unlock();
+		kfree(assoc_data);
+		return -EINVAL;
+	}
+	memcpy(assoc_data->ssid, ssid_elem->data, ssid_elem->datalen);
+	assoc_data->ssid_len = ssid_elem->datalen;
+	memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len);
+	vif_cfg->ssid_len = assoc_data->ssid_len;
+	rcu_read_unlock();
+
+	if (req->ap_mld_addr) {
+		for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) {
+			if (!req->links[i].bss)
+				continue;
+			link = sdata_dereference(sdata->link[i], sdata);
+			if (link)
+				ether_addr_copy(assoc_data->link[i].addr,
+						link->conf->addr);
+			else
+				eth_random_addr(assoc_data->link[i].addr);
+		}
+	} else {
+		memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN);
+	}
+
+	assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
+
+	memcpy(assoc_data->ap_addr,
+	       req->ap_mld_addr ?: req->bss->bssid,
+	       ETH_ALEN);
+
+	if (ifmgd->associated) {
+		u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+
+		sdata_info(sdata,
+			   "disconnect from AP %pM for new assoc to %pM\n",
+			   sdata->vif.cfg.ap_addr, assoc_data->ap_addr);
+		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+				       WLAN_REASON_UNSPECIFIED,
+				       false, frame_buf);
+
+		ieee80211_report_disconnect(sdata, frame_buf,
+					    sizeof(frame_buf), true,
+					    WLAN_REASON_UNSPECIFIED,
+					    false);
+	}
+
+	if (ifmgd->auth_data && !ifmgd->auth_data->done) {
+		err = -EBUSY;
+		goto err_free;
+	}
+
+	if (ifmgd->assoc_data) {
+		err = -EBUSY;
+		goto err_free;
+	}
+
+	if (ifmgd->auth_data) {
+		bool match;
+
+		/* keep sta info, bssid if matching */
+		match = ether_addr_equal(ifmgd->auth_data->ap_addr,
+					 assoc_data->ap_addr) &&
+			ifmgd->auth_data->link_id == req->link_id;
+		ieee80211_destroy_auth_data(sdata, match);
+	}
+
+	/* prepare assoc data */
+
+	bss = (void *)cbss->priv;
+	assoc_data->wmm = bss->wmm_used &&
+			  (local->hw.queues >= IEEE80211_NUM_ACS);
+
+	/*
+	 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
+	 * We still associate in non-HT mode (11a/b/g) if any one of these
+	 * ciphers is configured as pairwise.
+	 * We can set this to true for non-11n hardware, that'll be checked
+	 * separately along with the peer capabilities.
+	 */
+	for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
+		if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
+		    req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
+		    req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
+			conn_flags |= IEEE80211_CONN_DISABLE_HT;
+			conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+			conn_flags |= IEEE80211_CONN_DISABLE_HE;
+			conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+			netdev_info(sdata->dev,
+				    "disabling HT/VHT/HE due to WEP/TKIP use\n");
+		}
+	}
+
+	/* also disable HT/VHT/HE/EHT if the AP doesn't use WMM */
+	if (!bss->wmm_used) {
+		conn_flags |= IEEE80211_CONN_DISABLE_HT;
+		conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+		conn_flags |= IEEE80211_CONN_DISABLE_HE;
+		conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+		netdev_info(sdata->dev,
+			    "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n");
+	}
+
+	if (req->flags & ASSOC_REQ_DISABLE_HT) {
+		mlme_dbg(sdata, "HT disabled by flag, disabling HT/VHT/HE\n");
+		conn_flags |= IEEE80211_CONN_DISABLE_HT;
+		conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+		conn_flags |= IEEE80211_CONN_DISABLE_HE;
+		conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	if (req->flags & ASSOC_REQ_DISABLE_VHT) {
+		mlme_dbg(sdata, "VHT disabled by flag, disabling VHT\n");
+		conn_flags |= IEEE80211_CONN_DISABLE_VHT;
+	}
+
+	if (req->flags & ASSOC_REQ_DISABLE_HE) {
+		mlme_dbg(sdata, "HE disabled by flag, disabling HE/EHT\n");
+		conn_flags |= IEEE80211_CONN_DISABLE_HE;
+		conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+	}
+
+	if (req->flags & ASSOC_REQ_DISABLE_EHT)
+		conn_flags |= IEEE80211_CONN_DISABLE_EHT;
+
+	memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
+	memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
+	       sizeof(ifmgd->ht_capa_mask));
+
+	memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
+	memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
+	       sizeof(ifmgd->vht_capa_mask));
+
+	memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa));
+	memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask,
+	       sizeof(ifmgd->s1g_capa_mask));
+
+	if (req->ie && req->ie_len) {
+		memcpy(assoc_data->ie, req->ie, req->ie_len);
+		assoc_data->ie_len = req->ie_len;
+		assoc_data->ie_pos = assoc_data->ie + assoc_data->ie_len;
+	} else {
+		assoc_data->ie_pos = assoc_data->ie;
+	}
+
+	if (req->fils_kek) {
+		/* should already be checked in cfg80211 - so warn */
+		if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
+			err = -EINVAL;
+			goto err_free;
+		}
+		memcpy(assoc_data->fils_kek, req->fils_kek,
+		       req->fils_kek_len);
+		assoc_data->fils_kek_len = req->fils_kek_len;
+	}
+
+	if (req->fils_nonces)
+		memcpy(assoc_data->fils_nonces, req->fils_nonces,
+		       2 * FILS_NONCE_LEN);
+
+	/* default timeout */
+	assoc_data->timeout = jiffies;
+	assoc_data->timeout_started = true;
+
+	assoc_data->assoc_link_id = assoc_link_id;
+
+	if (req->ap_mld_addr) {
+		for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) {
+			assoc_data->link[i].conn_flags = conn_flags;
+			assoc_data->link[i].bss = req->links[i].bss;
+		}
+
+		/* if there was no authentication, set up the link */
+		err = ieee80211_vif_set_links(sdata, BIT(assoc_link_id));
+		if (err)
+			goto err_clear;
+	} else {
+		assoc_data->link[0].conn_flags = conn_flags;
+		assoc_data->link[0].bss = cbss;
+	}
+
+	link = sdata_dereference(sdata->link[assoc_link_id], sdata);
+	if (WARN_ON(!link)) {
+		err = -EINVAL;
+		goto err_clear;
+	}
+
+	/* keep old conn_flags from ieee80211_prep_channel() from auth */
+	conn_flags |= link->u.mgd.conn_flags;
+	conn_flags |= ieee80211_setup_assoc_link(sdata, assoc_data, req,
+						 conn_flags, assoc_link_id);
+	override = link->u.mgd.conn_flags != conn_flags;
+	link->u.mgd.conn_flags |= conn_flags;
+
+	if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
+		 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
+	     "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
+		sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
+
+	if (bss->wmm_used && bss->uapsd_supported &&
+	    (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
+		assoc_data->uapsd = true;
+		ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
+	} else {
+		assoc_data->uapsd = false;
+		ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
+	}
+
+	if (req->prev_bssid)
+		memcpy(assoc_data->prev_ap_addr, req->prev_bssid, ETH_ALEN);
+
+	if (req->use_mfp) {
+		ifmgd->mfp = IEEE80211_MFP_REQUIRED;
+		ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
+	} else {
+		ifmgd->mfp = IEEE80211_MFP_DISABLED;
+		ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
+	}
+
+	if (req->flags & ASSOC_REQ_USE_RRM)
+		ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
+	else
+		ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
+
+	if (req->crypto.control_port)
+		ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
+	else
+		ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
+
+	sdata->control_port_protocol = req->crypto.control_port_ethertype;
+	sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
+	sdata->control_port_over_nl80211 =
+					req->crypto.control_port_over_nl80211;
+	sdata->control_port_no_preauth = req->crypto.control_port_no_preauth;
+
+	/* kick off associate process */
+	ifmgd->assoc_data = assoc_data;
+
+	for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) {
+		if (!assoc_data->link[i].bss)
+			continue;
+		if (i == assoc_data->assoc_link_id)
+			continue;
+		/* only calculate the flags, hence link == NULL */
+		err = ieee80211_prep_channel(sdata, NULL, assoc_data->link[i].bss,
+					     &assoc_data->link[i].conn_flags);
+		if (err)
+			goto err_clear;
+	}
+
+	/* needed for transmitting the assoc frames properly */
+	memcpy(sdata->vif.cfg.ap_addr, assoc_data->ap_addr, ETH_ALEN);
+
+	err = ieee80211_prep_connection(sdata, cbss, req->link_id,
+					req->ap_mld_addr, true, override);
+	if (err)
+		goto err_clear;
+
+	assoc_data->link[assoc_data->assoc_link_id].conn_flags =
+		link->u.mgd.conn_flags;
+
+	if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC)) {
+		const struct cfg80211_bss_ies *beacon_ies;
+
+		rcu_read_lock();
+		beacon_ies = rcu_dereference(req->bss->beacon_ies);
+
+		if (beacon_ies) {
+			/*
+			 * Wait up to one beacon interval ...
+			 * should this be more if we miss one?
+			 */
+			sdata_info(sdata, "waiting for beacon from %pM\n",
+				   link->u.mgd.bssid);
+			assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
+			assoc_data->timeout_started = true;
+			assoc_data->need_beacon = true;
+		}
+		rcu_read_unlock();
+	}
+
+	run_again(sdata, assoc_data->timeout);
+
+	return 0;
+ err_clear:
+	eth_zero_addr(sdata->deflink.u.mgd.bssid);
+	ieee80211_link_info_change_notify(sdata, &sdata->deflink,
+					  BSS_CHANGED_BSSID);
+	ifmgd->assoc_data = NULL;
+ err_free:
+	kfree(assoc_data);
+	return err;
+}
+
+int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
+			 struct cfg80211_deauth_request *req)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+	bool tx = !req->local_state_change;
+	struct ieee80211_prep_tx_info info = {
+		.subtype = IEEE80211_STYPE_DEAUTH,
+	};
+
+	if (ifmgd->auth_data &&
+	    ether_addr_equal(ifmgd->auth_data->ap_addr, req->bssid)) {
+		sdata_info(sdata,
+			   "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
+			   req->bssid, req->reason_code,
+			   ieee80211_get_reason_code_string(req->reason_code));
+
+		drv_mgd_prepare_tx(sdata->local, sdata, &info);
+		ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
+					       IEEE80211_STYPE_DEAUTH,
+					       req->reason_code, tx,
+					       frame_buf);
+		ieee80211_destroy_auth_data(sdata, false);
+		ieee80211_report_disconnect(sdata, frame_buf,
+					    sizeof(frame_buf), true,
+					    req->reason_code, false);
+		drv_mgd_complete_tx(sdata->local, sdata, &info);
+		return 0;
+	}
+
+	if (ifmgd->assoc_data &&
+	    ether_addr_equal(ifmgd->assoc_data->ap_addr, req->bssid)) {
+		sdata_info(sdata,
+			   "aborting association with %pM by local choice (Reason: %u=%s)\n",
+			   req->bssid, req->reason_code,
+			   ieee80211_get_reason_code_string(req->reason_code));
+
+		drv_mgd_prepare_tx(sdata->local, sdata, &info);
+		ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
+					       IEEE80211_STYPE_DEAUTH,
+					       req->reason_code, tx,
+					       frame_buf);
+		ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
+		ieee80211_report_disconnect(sdata, frame_buf,
+					    sizeof(frame_buf), true,
+					    req->reason_code, false);
+		return 0;
+	}
+
+	if (ifmgd->associated &&
+	    ether_addr_equal(sdata->vif.cfg.ap_addr, req->bssid)) {
+		sdata_info(sdata,
+			   "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
+			   req->bssid, req->reason_code,
+			   ieee80211_get_reason_code_string(req->reason_code));
+
+		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+				       req->reason_code, tx, frame_buf);
+		ieee80211_report_disconnect(sdata, frame_buf,
+					    sizeof(frame_buf), true,
+					    req->reason_code, false);
+		drv_mgd_complete_tx(sdata->local, sdata, &info);
+		return 0;
+	}
+
+	return -ENOTCONN;
+}
+
+int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
+			   struct cfg80211_disassoc_request *req)
+{
+	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+
+	if (!sdata->u.mgd.associated ||
+	    memcmp(sdata->vif.cfg.ap_addr, req->ap_addr, ETH_ALEN))
+		return -ENOTCONN;
+
+	sdata_info(sdata,
+		   "disassociating from %pM by local choice (Reason: %u=%s)\n",
+		   req->ap_addr, req->reason_code,
+		   ieee80211_get_reason_code_string(req->reason_code));
+
+	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
+			       req->reason_code, !req->local_state_change,
+			       frame_buf);
+
+	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
+				    req->reason_code, false);
+
+	return 0;
+}
+
+void ieee80211_mgd_stop_link(struct ieee80211_link_data *link)
+{
+	cancel_work_sync(&link->u.mgd.request_smps_work);
+	cancel_work_sync(&link->u.mgd.chswitch_work);
+}
+
+void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	/*
+	 * Make sure some work items will not run after this,
+	 * they will not do anything but might not have been
+	 * cancelled when disconnecting.
+	 */
+	cancel_work_sync(&ifmgd->monitor_work);
+	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+	cancel_work_sync(&ifmgd->csa_connection_drop_work);
+	cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
+
+	sdata_lock(sdata);
+	if (ifmgd->assoc_data)
+		ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
+	if (ifmgd->auth_data)
+		ieee80211_destroy_auth_data(sdata, false);
+	spin_lock_bh(&ifmgd->teardown_lock);
+	if (ifmgd->teardown_skb) {
+		kfree_skb(ifmgd->teardown_skb);
+		ifmgd->teardown_skb = NULL;
+		ifmgd->orig_teardown_skb = NULL;
+	}
+	kfree(ifmgd->assoc_req_ies);
+	ifmgd->assoc_req_ies = NULL;
+	ifmgd->assoc_req_ies_len = 0;
+	spin_unlock_bh(&ifmgd->teardown_lock);
+	del_timer_sync(&ifmgd->timer);
+	sdata_unlock(sdata);
+}
+
+void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
+			       enum nl80211_cqm_rssi_threshold_event rssi_event,
+			       s32 rssi_level,
+			       gfp_t gfp)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+	trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
+
+	cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
+}
+EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
+
+void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+	trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
+
+	cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
+}
+EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);
+
+static void _ieee80211_enable_rssi_reports(struct ieee80211_sub_if_data *sdata,
+					    int rssi_min_thold,
+					    int rssi_max_thold)
+{
+	trace_api_enable_rssi_reports(sdata, rssi_min_thold, rssi_max_thold);
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return;
+
+	/*
+	 * Scale up threshold values before storing it, as the RSSI averaging
+	 * algorithm uses a scaled up value as well. Change this scaling
+	 * factor if the RSSI averaging algorithm changes.
+	 */
+	sdata->u.mgd.rssi_min_thold = rssi_min_thold*16;
+	sdata->u.mgd.rssi_max_thold = rssi_max_thold*16;
+}
+
+void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
+				    int rssi_min_thold,
+				    int rssi_max_thold)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+	WARN_ON(rssi_min_thold == rssi_max_thold ||
+		rssi_min_thold > rssi_max_thold);
+
+	_ieee80211_enable_rssi_reports(sdata, rssi_min_thold,
+				       rssi_max_thold);
+}
+EXPORT_SYMBOL(ieee80211_enable_rssi_reports);
+
+void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+	_ieee80211_enable_rssi_reports(sdata, 0, 0);
+}
+EXPORT_SYMBOL(ieee80211_disable_rssi_reports);