Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 6396 insertions, 0 deletions

diff --git a/tools/memory-model/Documentation/README b/tools/memory-model/Documentation/README
new file mode 100644
index 000000000..db90a26db
--- /dev/null
+++ b/tools/memory-model/Documentation/README
@@ -0,0 +1,76 @@
+It has been said that successful communication requires first identifying
+what your audience knows and then building a bridge from their current
+knowledge to what they need to know.  Unfortunately, the expected
+Linux-kernel memory model (LKMM) audience might be anywhere from novice
+to expert both in kernel hacking and in understanding LKMM.
+
+This document therefore points out a number of places to start reading,
+depending on what you know and what you would like to learn.  Please note
+that the documents later in this list assume that the reader understands
+the material provided by documents earlier in this list.
+
+o	You are new to Linux-kernel concurrency: simple.txt
+
+o	You have some background in Linux-kernel concurrency, and would
+	like an overview of the types of low-level concurrency primitives
+	that the Linux kernel provides:  ordering.txt
+
+	Here, "low level" means atomic operations to single variables.
+
+o	You are familiar with the Linux-kernel concurrency primitives
+	that you need, and just want to get started with LKMM litmus
+	tests:  litmus-tests.txt
+
+o	You are familiar with Linux-kernel concurrency, and would
+	like a detailed intuitive understanding of LKMM, including
+	situations involving more than two threads:  recipes.txt
+
+o	You would like a detailed understanding of what your compiler can
+	and cannot do to control dependencies:  control-dependencies.txt
+
+o	You are familiar with Linux-kernel concurrency and the use of
+	LKMM, and would like a quick reference:  cheatsheet.txt
+
+o	You are familiar with Linux-kernel concurrency and the use
+	of LKMM, and would like to learn about LKMM's requirements,
+	rationale, and implementation:	explanation.txt
+
+o	You are interested in the publications related to LKMM, including
+	hardware manuals, academic literature, standards-committee
+	working papers, and LWN articles:  references.txt
+
+
+====================
+DESCRIPTION OF FILES
+====================
+
+README
+	This file.
+
+cheatsheet.txt
+	Quick-reference guide to the Linux-kernel memory model.
+
+control-dependencies.txt
+	Guide to preventing compiler optimizations from destroying
+	your control dependencies.
+
+explanation.txt
+	Detailed description of the memory model.
+
+litmus-tests.txt
+	The format, features, capabilities, and limitations of the litmus
+	tests that LKMM can evaluate.
+
+ordering.txt
+	Overview of the Linux kernel's low-level memory-ordering
+	primitives by category.
+
+recipes.txt
+	Common memory-ordering patterns.
+
+references.txt
+	Background information.
+
+simple.txt
+	Starting point for someone new to Linux-kernel concurrency.
+	And also a reminder of the simpler approaches to concurrency!
diff --git a/tools/memory-model/Documentation/access-marking.txt b/tools/memory-model/Documentation/access-marking.txt
new file mode 100644
index 000000000..657782221
--- /dev/null
+++ b/tools/memory-model/Documentation/access-marking.txt
@@ -0,0 +1,598 @@
+MARKING SHARED-MEMORY ACCESSES
+==============================
+
+This document provides guidelines for marking intentionally concurrent
+normal accesses to shared memory, that is "normal" as in accesses that do
+not use read-modify-write atomic operations.  It also describes how to
+document these accesses, both with comments and with special assertions
+processed by the Kernel Concurrency Sanitizer (KCSAN).  This discussion
+builds on an earlier LWN article [1].
+
+
+ACCESS-MARKING OPTIONS
+======================
+
+The Linux kernel provides the following access-marking options:
+
+1.	Plain C-language accesses (unmarked), for example, "a = b;"
+
+2.	Data-race marking, for example, "data_race(a = b);"
+
+3.	READ_ONCE(), for example, "a = READ_ONCE(b);"
+	The various forms of atomic_read() also fit in here.
+
+4.	WRITE_ONCE(), for example, "WRITE_ONCE(a, b);"
+	The various forms of atomic_set() also fit in here.
+
+
+These may be used in combination, as shown in this admittedly improbable
+example:
+
+	WRITE_ONCE(a, b + data_race(c + d) + READ_ONCE(e));
+
+Neither plain C-language accesses nor data_race() (#1 and #2 above) place
+any sort of constraint on the compiler's choice of optimizations [2].
+In contrast, READ_ONCE() and WRITE_ONCE() (#3 and #4 above) restrict the
+compiler's use of code-motion and common-subexpression optimizations.
+Therefore, if a given access is involved in an intentional data race,
+using READ_ONCE() for loads and WRITE_ONCE() for stores is usually
+preferable to data_race(), which in turn is usually preferable to plain
+C-language accesses.  It is permissible to combine #2 and #3, for example,
+data_race(READ_ONCE(a)), which will both restrict compiler optimizations
+and disable KCSAN diagnostics.
+
+KCSAN will complain about many types of data races involving plain
+C-language accesses, but marking all accesses involved in a given data
+race with one of data_race(), READ_ONCE(), or WRITE_ONCE(), will prevent
+KCSAN from complaining.  Of course, lack of KCSAN complaints does not
+imply correct code.  Therefore, please take a thoughtful approach
+when responding to KCSAN complaints.  Churning the code base with
+ill-considered additions of data_race(), READ_ONCE(), and WRITE_ONCE()
+is unhelpful.
+
+In fact, the following sections describe situations where use of
+data_race() and even plain C-language accesses is preferable to
+READ_ONCE() and WRITE_ONCE().
+
+
+Use of the data_race() Macro
+----------------------------
+
+Here are some situations where data_race() should be used instead of
+READ_ONCE() and WRITE_ONCE():
+
+1.	Data-racy loads from shared variables whose values are used only
+	for diagnostic purposes.
+
+2.	Data-racy reads whose values are checked against marked reload.
+
+3.	Reads whose values feed into error-tolerant heuristics.
+
+4.	Writes setting values that feed into error-tolerant heuristics.
+
+
+Data-Racy Reads for Approximate Diagnostics
+
+Approximate diagnostics include lockdep reports, monitoring/statistics
+(including /proc and /sys output), WARN*()/BUG*() checks whose return
+values are ignored, and other situations where reads from shared variables
+are not an integral part of the core concurrency design.
+
+In fact, use of data_race() instead READ_ONCE() for these diagnostic
+reads can enable better checking of the remaining accesses implementing
+the core concurrency design.  For example, suppose that the core design
+prevents any non-diagnostic reads from shared variable x from running
+concurrently with updates to x.  Then using plain C-language writes
+to x allows KCSAN to detect reads from x from within regions of code
+that fail to exclude the updates.  In this case, it is important to use
+data_race() for the diagnostic reads because otherwise KCSAN would give
+false-positive warnings about these diagnostic reads.
+
+If it is necessary to both restrict compiler optimizations and disable
+KCSAN diagnostics, use both data_race() and READ_ONCE(), for example,
+data_race(READ_ONCE(a)).
+
+In theory, plain C-language loads can also be used for this use case.
+However, in practice this will have the disadvantage of causing KCSAN
+to generate false positives because KCSAN will have no way of knowing
+that the resulting data race was intentional.
+
+
+Data-Racy Reads That Are Checked Against Marked Reload
+
+The values from some reads are not implicitly trusted.  They are instead
+fed into some operation that checks the full value against a later marked
+load from memory, which means that the occasional arbitrarily bogus value
+is not a problem.  For example, if a bogus value is fed into cmpxchg(),
+all that happens is that this cmpxchg() fails, which normally results
+in a retry.  Unless the race condition that resulted in the bogus value
+recurs, this retry will with high probability succeed, so no harm done.
+
+However, please keep in mind that a data_race() load feeding into
+a cmpxchg_relaxed() might still be subject to load fusing on some
+architectures.  Therefore, it is best to capture the return value from
+the failing cmpxchg() for the next iteration of the loop, an approach
+that provides the compiler much less scope for mischievous optimizations.
+Capturing the return value from cmpxchg() also saves a memory reference
+in many cases.
+
+In theory, plain C-language loads can also be used for this use case.
+However, in practice this will have the disadvantage of causing KCSAN
+to generate false positives because KCSAN will have no way of knowing
+that the resulting data race was intentional.
+
+
+Reads Feeding Into Error-Tolerant Heuristics
+
+Values from some reads feed into heuristics that can tolerate occasional
+errors.  Such reads can use data_race(), thus allowing KCSAN to focus on
+the other accesses to the relevant shared variables.  But please note
+that data_race() loads are subject to load fusing, which can result in
+consistent errors, which in turn are quite capable of breaking heuristics.
+Therefore use of data_race() should be limited to cases where some other
+code (such as a barrier() call) will force the occasional reload.
+
+Note that this use case requires that the heuristic be able to handle
+any possible error.  In contrast, if the heuristics might be fatally
+confused by one or more of the possible erroneous values, use READ_ONCE()
+instead of data_race().
+
+In theory, plain C-language loads can also be used for this use case.
+However, in practice this will have the disadvantage of causing KCSAN
+to generate false positives because KCSAN will have no way of knowing
+that the resulting data race was intentional.
+
+
+Writes Setting Values Feeding Into Error-Tolerant Heuristics
+
+The values read into error-tolerant heuristics come from somewhere,
+for example, from sysfs.  This means that some code in sysfs writes
+to this same variable, and these writes can also use data_race().
+After all, if the heuristic can tolerate the occasional bogus value
+due to compiler-mangled reads, it can also tolerate the occasional
+compiler-mangled write, at least assuming that the proper value is in
+place once the write completes.
+
+Plain C-language stores can also be used for this use case.  However,
+in kernels built with CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n, this
+will have the disadvantage of causing KCSAN to generate false positives
+because KCSAN will have no way of knowing that the resulting data race
+was intentional.
+
+
+Use of Plain C-Language Accesses
+--------------------------------
+
+Here are some example situations where plain C-language accesses should
+used instead of READ_ONCE(), WRITE_ONCE(), and data_race():
+
+1.	Accesses protected by mutual exclusion, including strict locking
+	and sequence locking.
+
+2.	Initialization-time and cleanup-time accesses.	This covers a
+	wide variety of situations, including the uniprocessor phase of
+	system boot, variables to be used by not-yet-spawned kthreads,
+	structures not yet published to reference-counted or RCU-protected
+	data structures, and the cleanup side of any of these situations.
+
+3.	Per-CPU variables that are not accessed from other CPUs.
+
+4.	Private per-task variables, including on-stack variables, some
+	fields in the task_struct structure, and task-private heap data.
+
+5.	Any other loads for which there is not supposed to be a concurrent
+	store to that same variable.
+
+6.	Any other stores for which there should be neither concurrent
+	loads nor concurrent stores to that same variable.
+
+	But note that KCSAN makes two explicit exceptions to this rule
+	by default, refraining from flagging plain C-language stores:
+
+	a.	No matter what.  You can override this default by building
+		with CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n.
+
+	b.	When the store writes the value already contained in
+		that variable.	You can override this default by building
+		with CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n.
+
+	c.	When one of the stores is in an interrupt handler and
+		the other in the interrupted code.  You can override this
+		default by building with CONFIG_KCSAN_INTERRUPT_WATCHER=y.
+
+Note that it is important to use plain C-language accesses in these cases,
+because doing otherwise prevents KCSAN from detecting violations of your
+code's synchronization rules.
+
+
+ACCESS-DOCUMENTATION OPTIONS
+============================
+
+It is important to comment marked accesses so that people reading your
+code, yourself included, are reminded of the synchronization design.
+However, it is even more important to comment plain C-language accesses
+that are intentionally involved in data races.  Such comments are
+needed to remind people reading your code, again, yourself included,
+of how the compiler has been prevented from optimizing those accesses
+into concurrency bugs.
+
+It is also possible to tell KCSAN about your synchronization design.
+For example, ASSERT_EXCLUSIVE_ACCESS(foo) tells KCSAN that any
+concurrent access to variable foo by any other CPU is an error, even
+if that concurrent access is marked with READ_ONCE().  In addition,
+ASSERT_EXCLUSIVE_WRITER(foo) tells KCSAN that although it is OK for there
+to be concurrent reads from foo from other CPUs, it is an error for some
+other CPU to be concurrently writing to foo, even if that concurrent
+write is marked with data_race() or WRITE_ONCE().
+
+Note that although KCSAN will call out data races involving either
+ASSERT_EXCLUSIVE_ACCESS() or ASSERT_EXCLUSIVE_WRITER() on the one hand
+and data_race() writes on the other, KCSAN will not report the location
+of these data_race() writes.
+
+
+EXAMPLES
+========
+
+As noted earlier, the goal is to prevent the compiler from destroying
+your concurrent algorithm, to help the human reader, and to inform
+KCSAN of aspects of your concurrency design.  This section looks at a
+few examples showing how this can be done.
+
+
+Lock Protection With Lockless Diagnostic Access
+-----------------------------------------------
+
+For example, suppose a shared variable "foo" is read only while a
+reader-writer spinlock is read-held, written only while that same
+spinlock is write-held, except that it is also read locklessly for
+diagnostic purposes.  The code might look as follows:
+
+	int foo;
+	DEFINE_RWLOCK(foo_rwlock);
+
+	void update_foo(int newval)
+	{
+		write_lock(&foo_rwlock);
+		foo = newval;
+		do_something(newval);
+		write_unlock(&foo_rwlock);
+	}
+
+	int read_foo(void)
+	{
+		int ret;
+
+		read_lock(&foo_rwlock);
+		do_something_else();
+		ret = foo;
+		read_unlock(&foo_rwlock);
+		return ret;
+	}
+
+	void read_foo_diagnostic(void)
+	{
+		pr_info("Current value of foo: %d\n", data_race(foo));
+	}
+
+The reader-writer lock prevents the compiler from introducing concurrency
+bugs into any part of the main algorithm using foo, which means that
+the accesses to foo within both update_foo() and read_foo() can (and
+should) be plain C-language accesses.  One benefit of making them be
+plain C-language accesses is that KCSAN can detect any erroneous lockless
+reads from or updates to foo.  The data_race() in read_foo_diagnostic()
+tells KCSAN that data races are expected, and should be silently
+ignored.  This data_race() also tells the human reading the code that
+read_foo_diagnostic() might sometimes return a bogus value.
+
+If it is necessary to suppress compiler optimization and also detect
+buggy lockless writes, read_foo_diagnostic() can be updated as follows:
+
+	void read_foo_diagnostic(void)
+	{
+		pr_info("Current value of foo: %d\n", data_race(READ_ONCE(foo)));
+	}
+
+Alternatively, given that KCSAN is to ignore all accesses in this function,
+this function can be marked __no_kcsan and the data_race() can be dropped:
+
+	void __no_kcsan read_foo_diagnostic(void)
+	{
+		pr_info("Current value of foo: %d\n", READ_ONCE(foo));
+	}
+
+However, in order for KCSAN to detect buggy lockless writes, your kernel
+must be built with CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n.  If you
+need KCSAN to detect such a write even if that write did not change
+the value of foo, you also need CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n.
+If you need KCSAN to detect such a write happening in an interrupt handler
+running on the same CPU doing the legitimate lock-protected write, you
+also need CONFIG_KCSAN_INTERRUPT_WATCHER=y.  With some or all of these
+Kconfig options set properly, KCSAN can be quite helpful, although
+it is not necessarily a full replacement for hardware watchpoints.
+On the other hand, neither are hardware watchpoints a full replacement
+for KCSAN because it is not always easy to tell hardware watchpoint to
+conditionally trap on accesses.
+
+
+Lock-Protected Writes With Lockless Reads
+-----------------------------------------
+
+For another example, suppose a shared variable "foo" is updated only
+while holding a spinlock, but is read locklessly.  The code might look
+as follows:
+
+	int foo;
+	DEFINE_SPINLOCK(foo_lock);
+
+	void update_foo(int newval)
+	{
+		spin_lock(&foo_lock);
+		WRITE_ONCE(foo, newval);
+		ASSERT_EXCLUSIVE_WRITER(foo);
+		do_something(newval);
+		spin_unlock(&foo_wlock);
+	}
+
+	int read_foo(void)
+	{
+		do_something_else();
+		return READ_ONCE(foo);
+	}
+
+Because foo is read locklessly, all accesses are marked.  The purpose
+of the ASSERT_EXCLUSIVE_WRITER() is to allow KCSAN to check for a buggy
+concurrent lockless write.
+
+
+Lock-Protected Writes With Heuristic Lockless Reads
+---------------------------------------------------
+
+For another example, suppose that the code can normally make use of
+a per-data-structure lock, but there are times when a global lock
+is required.  These times are indicated via a global flag.  The code
+might look as follows, and is based loosely on nf_conntrack_lock(),
+nf_conntrack_all_lock(), and nf_conntrack_all_unlock():
+
+	bool global_flag;
+	DEFINE_SPINLOCK(global_lock);
+	struct foo {
+		spinlock_t f_lock;
+		int f_data;
+	};
+
+	/* All foo structures are in the following array. */
+	int nfoo;
+	struct foo *foo_array;
+
+	void do_something_locked(struct foo *fp)
+	{
+		/* This works even if data_race() returns nonsense. */
+		if (!data_race(global_flag)) {
+			spin_lock(&fp->f_lock);
+			if (!smp_load_acquire(&global_flag)) {
+				do_something(fp);
+				spin_unlock(&fp->f_lock);
+				return;
+			}
+			spin_unlock(&fp->f_lock);
+		}
+		spin_lock(&global_lock);
+		/* global_lock held, thus global flag cannot be set. */
+		spin_lock(&fp->f_lock);
+		spin_unlock(&global_lock);
+		/*
+		 * global_flag might be set here, but begin_global()
+		 * will wait for ->f_lock to be released.
+		 */
+		do_something(fp);
+		spin_unlock(&fp->f_lock);
+	}
+
+	void begin_global(void)
+	{
+		int i;
+
+		spin_lock(&global_lock);
+		WRITE_ONCE(global_flag, true);
+		for (i = 0; i < nfoo; i++) {
+			/*
+			 * Wait for pre-existing local locks.  One at
+			 * a time to avoid lockdep limitations.
+			 */
+			spin_lock(&fp->f_lock);
+			spin_unlock(&fp->f_lock);
+		}
+	}
+
+	void end_global(void)
+	{
+		smp_store_release(&global_flag, false);
+		spin_unlock(&global_lock);
+	}
+
+All code paths leading from the do_something_locked() function's first
+read from global_flag acquire a lock, so endless load fusing cannot
+happen.
+
+If the value read from global_flag is true, then global_flag is
+rechecked while holding ->f_lock, which, if global_flag is now false,
+prevents begin_global() from completing.  It is therefore safe to invoke
+do_something().
+
+Otherwise, if either value read from global_flag is true, then after
+global_lock is acquired global_flag must be false.  The acquisition of
+->f_lock will prevent any call to begin_global() from returning, which
+means that it is safe to release global_lock and invoke do_something().
+
+For this to work, only those foo structures in foo_array[] may be passed
+to do_something_locked().  The reason for this is that the synchronization
+with begin_global() relies on momentarily holding the lock of each and
+every foo structure.
+
+The smp_load_acquire() and smp_store_release() are required because
+changes to a foo structure between calls to begin_global() and
+end_global() are carried out without holding that structure's ->f_lock.
+The smp_load_acquire() and smp_store_release() ensure that the next
+invocation of do_something() from do_something_locked() will see those
+changes.
+
+
+Lockless Reads and Writes
+-------------------------
+
+For another example, suppose a shared variable "foo" is both read and
+updated locklessly.  The code might look as follows:
+
+	int foo;
+
+	int update_foo(int newval)
+	{
+		int ret;
+
+		ret = xchg(&foo, newval);
+		do_something(newval);
+		return ret;
+	}
+
+	int read_foo(void)
+	{
+		do_something_else();
+		return READ_ONCE(foo);
+	}
+
+Because foo is accessed locklessly, all accesses are marked.  It does
+not make sense to use ASSERT_EXCLUSIVE_WRITER() in this case because
+there really can be concurrent lockless writers.  KCSAN would
+flag any concurrent plain C-language reads from foo, and given
+CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n, also any concurrent plain
+C-language writes to foo.
+
+
+Lockless Reads and Writes, But With Single-Threaded Initialization
+------------------------------------------------------------------
+
+For yet another example, suppose that foo is initialized in a
+single-threaded manner, but that a number of kthreads are then created
+that locklessly and concurrently access foo.  Some snippets of this code
+might look as follows:
+
+	int foo;
+
+	void initialize_foo(int initval, int nkthreads)
+	{
+		int i;
+
+		foo = initval;
+		ASSERT_EXCLUSIVE_ACCESS(foo);
+		for (i = 0; i < nkthreads; i++)
+			kthread_run(access_foo_concurrently, ...);
+	}
+
+	/* Called from access_foo_concurrently(). */
+	int update_foo(int newval)
+	{
+		int ret;
+
+		ret = xchg(&foo, newval);
+		do_something(newval);
+		return ret;
+	}
+
+	/* Also called from access_foo_concurrently(). */
+	int read_foo(void)
+	{
+		do_something_else();
+		return READ_ONCE(foo);
+	}
+
+The initialize_foo() uses a plain C-language write to foo because there
+are not supposed to be concurrent accesses during initialization.  The
+ASSERT_EXCLUSIVE_ACCESS() allows KCSAN to flag buggy concurrent unmarked
+reads, and the ASSERT_EXCLUSIVE_ACCESS() call further allows KCSAN to
+flag buggy concurrent writes, even if:  (1) Those writes are marked or
+(2) The kernel was built with CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y.
+
+
+Checking Stress-Test Race Coverage
+----------------------------------
+
+When designing stress tests it is important to ensure that race conditions
+of interest really do occur.  For example, consider the following code
+fragment:
+
+	int foo;
+
+	int update_foo(int newval)
+	{
+		return xchg(&foo, newval);
+	}
+
+	int xor_shift_foo(int shift, int mask)
+	{
+		int old, new, newold;
+
+		newold = data_race(foo); /* Checked by cmpxchg(). */
+		do {
+			old = newold;
+			new = (old << shift) ^ mask;
+			newold = cmpxchg(&foo, old, new);
+		} while (newold != old);
+		return old;
+	}
+
+	int read_foo(void)
+	{
+		return READ_ONCE(foo);
+	}
+
+If it is possible for update_foo(), xor_shift_foo(), and read_foo() to be
+invoked concurrently, the stress test should force this concurrency to
+actually happen.  KCSAN can evaluate the stress test when the above code
+is modified to read as follows:
+
+	int foo;
+
+	int update_foo(int newval)
+	{
+		ASSERT_EXCLUSIVE_ACCESS(foo);
+		return xchg(&foo, newval);
+	}
+
+	int xor_shift_foo(int shift, int mask)
+	{
+		int old, new, newold;
+
+		newold = data_race(foo); /* Checked by cmpxchg(). */
+		do {
+			old = newold;
+			new = (old << shift) ^ mask;
+			ASSERT_EXCLUSIVE_ACCESS(foo);
+			newold = cmpxchg(&foo, old, new);
+		} while (newold != old);
+		return old;
+	}
+
+
+	int read_foo(void)
+	{
+		ASSERT_EXCLUSIVE_ACCESS(foo);
+		return READ_ONCE(foo);
+	}
+
+If a given stress-test run does not result in KCSAN complaints from
+each possible pair of ASSERT_EXCLUSIVE_ACCESS() invocations, the
+stress test needs improvement.  If the stress test was to be evaluated
+on a regular basis, it would be wise to place the above instances of
+ASSERT_EXCLUSIVE_ACCESS() under #ifdef so that they did not result in
+false positives when not evaluating the stress test.
+
+
+REFERENCES
+==========
+
+[1] "Concurrency bugs should fear the big bad data-race detector (part 2)"
+    https://lwn.net/Articles/816854/
+
+[2] "Who's afraid of a big bad optimizing compiler?"
+    https://lwn.net/Articles/793253/
diff --git a/tools/memory-model/Documentation/cheatsheet.txt b/tools/memory-model/Documentation/cheatsheet.txt
new file mode 100644
index 000000000..99d00870b
--- /dev/null
+++ b/tools/memory-model/Documentation/cheatsheet.txt
@@ -0,0 +1,35 @@
+                                  Prior Operation     Subsequent Operation
+                                  ---------------  ---------------------------
+                               C  Self  R  W  RMW  Self  R  W  DR  DW  RMW  SV
+                              --  ----  -  -  ---  ----  -  -  --  --  ---  --
+
+Relaxed store                        Y                                       Y
+Relaxed load                         Y                          Y   Y        Y
+Relaxed RMW operation                Y                          Y   Y        Y
+rcu_dereference()                    Y                          Y   Y        Y
+Successful *_acquire()               R                   Y  Y   Y   Y    Y   Y
+Successful *_release()         C        Y  Y    Y     W                      Y
+smp_rmb()                               Y       R        Y      Y        R
+smp_wmb()                                  Y    W           Y       Y    W
+smp_mb() & synchronize_rcu()  CP        Y  Y    Y        Y  Y   Y   Y    Y
+Successful full non-void RMW  CP     Y  Y  Y    Y     Y  Y  Y   Y   Y    Y   Y
+smp_mb__before_atomic()       CP        Y  Y    Y        a  a   a   a    Y
+smp_mb__after_atomic()        CP        a  a    Y        Y  Y   Y   Y    Y
+
+
+Key:	Relaxed:  A relaxed operation is either READ_ONCE(), WRITE_ONCE(),
+		  a *_relaxed() RMW operation, an unsuccessful RMW
+		  operation, a non-value-returning RMW operation such
+		  as atomic_inc(), or one of the atomic*_read() and
+		  atomic*_set() family of operations.
+	C:	  Ordering is cumulative
+	P:	  Ordering propagates
+	R:	  Read, for example, READ_ONCE(), or read portion of RMW
+	W:	  Write, for example, WRITE_ONCE(), or write portion of RMW
+	Y:	  Provides ordering
+	a:	  Provides ordering given intervening RMW atomic operation
+	DR:	  Dependent read (address dependency)
+	DW:	  Dependent write (address, data, or control dependency)
+	RMW:	  Atomic read-modify-write operation
+	SELF:	  Orders self, as opposed to accesses before and/or after
+	SV:	  Orders later accesses to the same variable
diff --git a/tools/memory-model/Documentation/control-dependencies.txt b/tools/memory-model/Documentation/control-dependencies.txt
new file mode 100644
index 000000000..8b743d20f
--- /dev/null
+++ b/tools/memory-model/Documentation/control-dependencies.txt
@@ -0,0 +1,258 @@
+CONTROL DEPENDENCIES
+====================
+
+A major difficulty with control dependencies is that current compilers
+do not support them.  One purpose of this document is therefore to
+help you prevent your compiler from breaking your code.  However,
+control dependencies also pose other challenges, which leads to the
+second purpose of this document, namely to help you to avoid breaking
+your own code, even in the absence of help from your compiler.
+
+One such challenge is that control dependencies order only later stores.
+Therefore, a load-load control dependency will not preserve ordering
+unless a read memory barrier is provided.  Consider the following code:
+
+	q = READ_ONCE(a);
+	if (q)
+		p = READ_ONCE(b);
+
+This is not guaranteed to provide any ordering because some types of CPUs
+are permitted to predict the result of the load from "b".  This prediction
+can cause other CPUs to see this load as having happened before the load
+from "a".  This means that an explicit read barrier is required, for example
+as follows:
+
+	q = READ_ONCE(a);
+	if (q) {
+		smp_rmb();
+		p = READ_ONCE(b);
+	}
+
+However, stores are not speculated.  This means that ordering is
+(usually) guaranteed for load-store control dependencies, as in the
+following example:
+
+	q = READ_ONCE(a);
+	if (q)
+		WRITE_ONCE(b, 1);
+
+Control dependencies can pair with each other and with other types
+of ordering.  But please note that neither the READ_ONCE() nor the
+WRITE_ONCE() are optional.  Without the READ_ONCE(), the compiler might
+fuse the load from "a" with other loads.  Without the WRITE_ONCE(),
+the compiler might fuse the store to "b" with other stores.  Worse yet,
+the compiler might convert the store into a load and a check followed
+by a store, and this compiler-generated load would not be ordered by
+the control dependency.
+
+Furthermore, if the compiler is able to prove that the value of variable
+"a" is always non-zero, it would be well within its rights to optimize
+the original example by eliminating the "if" statement as follows:
+
+	q = a;
+	b = 1;  /* BUG: Compiler and CPU can both reorder!!! */
+
+So don't leave out either the READ_ONCE() or the WRITE_ONCE().
+In particular, although READ_ONCE() does force the compiler to emit a
+load, it does *not* force the compiler to actually use the loaded value.
+
+It is tempting to try use control dependencies to enforce ordering on
+identical stores on both branches of the "if" statement as follows:
+
+	q = READ_ONCE(a);
+	if (q) {
+		barrier();
+		WRITE_ONCE(b, 1);
+		do_something();
+	} else {
+		barrier();
+		WRITE_ONCE(b, 1);
+		do_something_else();
+	}
+
+Unfortunately, current compilers will transform this as follows at high
+optimization levels:
+
+	q = READ_ONCE(a);
+	barrier();
+	WRITE_ONCE(b, 1);  /* BUG: No ordering vs. load from a!!! */
+	if (q) {
+		/* WRITE_ONCE(b, 1); -- moved up, BUG!!! */
+		do_something();
+	} else {
+		/* WRITE_ONCE(b, 1); -- moved up, BUG!!! */
+		do_something_else();
+	}
+
+Now there is no conditional between the load from "a" and the store to
+"b", which means that the CPU is within its rights to reorder them:  The
+conditional is absolutely required, and must be present in the final
+assembly code, after all of the compiler and link-time optimizations
+have been applied.  Therefore, if you need ordering in this example,
+you must use explicit memory ordering, for example, smp_store_release():
+
+	q = READ_ONCE(a);
+	if (q) {
+		smp_store_release(&b, 1);
+		do_something();
+	} else {
+		smp_store_release(&b, 1);
+		do_something_else();
+	}
+
+Without explicit memory ordering, control-dependency-based ordering is
+guaranteed only when the stores differ, for example:
+
+	q = READ_ONCE(a);
+	if (q) {
+		WRITE_ONCE(b, 1);
+		do_something();
+	} else {
+		WRITE_ONCE(b, 2);
+		do_something_else();
+	}
+
+The initial READ_ONCE() is still required to prevent the compiler from
+knowing too much about the value of "a".
+
+But please note that you need to be careful what you do with the local
+variable "q", otherwise the compiler might be able to guess the value
+and again remove the conditional branch that is absolutely required to
+preserve ordering.  For example:
+
+	q = READ_ONCE(a);
+	if (q % MAX) {
+		WRITE_ONCE(b, 1);
+		do_something();
+	} else {
+		WRITE_ONCE(b, 2);
+		do_something_else();
+	}
+
+If MAX is compile-time defined to be 1, then the compiler knows that
+(q % MAX) must be equal to zero, regardless of the value of "q".
+The compiler is therefore within its rights to transform the above code
+into the following:
+
+	q = READ_ONCE(a);
+	WRITE_ONCE(b, 2);
+	do_something_else();
+
+Given this transformation, the CPU is not required to respect the ordering
+between the load from variable "a" and the store to variable "b".  It is
+tempting to add a barrier(), but this does not help.  The conditional
+is gone, and the barrier won't bring it back.  Therefore, if you need
+to relying on control dependencies to produce this ordering, you should
+make sure that MAX is greater than one, perhaps as follows:
+
+	q = READ_ONCE(a);
+	BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */
+	if (q % MAX) {
+		WRITE_ONCE(b, 1);
+		do_something();
+	} else {
+		WRITE_ONCE(b, 2);
+		do_something_else();
+	}
+
+Please note once again that each leg of the "if" statement absolutely
+must store different values to "b".  As in previous examples, if the two
+values were identical, the compiler could pull this store outside of the
+"if" statement, destroying the control dependency's ordering properties.
+
+You must also be careful avoid relying too much on boolean short-circuit
+evaluation.  Consider this example:
+
+	q = READ_ONCE(a);
+	if (q || 1 > 0)
+		WRITE_ONCE(b, 1);
+
+Because the first condition cannot fault and the second condition is
+always true, the compiler can transform this example as follows, again
+destroying the control dependency's ordering:
+
+	q = READ_ONCE(a);
+	WRITE_ONCE(b, 1);
+
+This is yet another example showing the importance of preventing the
+compiler from out-guessing your code.  Again, although READ_ONCE() really
+does force the compiler to emit code for a given load, the compiler is
+within its rights to discard the loaded value.
+
+In addition, control dependencies apply only to the then-clause and
+else-clause of the "if" statement in question.  In particular, they do
+not necessarily order the code following the entire "if" statement:
+
+	q = READ_ONCE(a);
+	if (q) {
+		WRITE_ONCE(b, 1);
+	} else {
+		WRITE_ONCE(b, 2);
+	}
+	WRITE_ONCE(c, 1);  /* BUG: No ordering against the read from "a". */
+
+It is tempting to argue that there in fact is ordering because the
+compiler cannot reorder volatile accesses and also cannot reorder
+the writes to "b" with the condition.  Unfortunately for this line
+of reasoning, the compiler might compile the two writes to "b" as
+conditional-move instructions, as in this fanciful pseudo-assembly
+language:
+
+	ld r1,a
+	cmp r1,$0
+	cmov,ne r4,$1
+	cmov,eq r4,$2
+	st r4,b
+	st $1,c
+
+The control dependencies would then extend only to the pair of cmov
+instructions and the store depending on them.  This means that a weakly
+ordered CPU would have no dependency of any sort between the load from
+"a" and the store to "c".  In short, control dependencies provide ordering
+only to the stores in the then-clause and else-clause of the "if" statement
+in question (including functions invoked by those two clauses), and not
+to code following that "if" statement.
+
+
+In summary:
+
+  (*) Control dependencies can order prior loads against later stores.
+      However, they do *not* guarantee any other sort of ordering:
+      Not prior loads against later loads, nor prior stores against
+      later anything.  If you need these other forms of ordering, use
+      smp_load_acquire(), smp_store_release(), or, in the case of prior
+      stores and later loads, smp_mb().
+
+  (*) If both legs of the "if" statement contain identical stores to
+      the same variable, then you must explicitly order those stores,
+      either by preceding both of them with smp_mb() or by using
+      smp_store_release().  Please note that it is *not* sufficient to use
+      barrier() at beginning and end of each leg of the "if" statement
+      because, as shown by the example above, optimizing compilers can
+      destroy the control dependency while respecting the letter of the
+      barrier() law.
+
+  (*) Control dependencies require at least one run-time conditional
+      between the prior load and the subsequent store, and this
+      conditional must involve the prior load.  If the compiler is able
+      to optimize the conditional away, it will have also optimized
+      away the ordering.  Careful use of READ_ONCE() and WRITE_ONCE()
+      can help to preserve the needed conditional.
+
+  (*) Control dependencies require that the compiler avoid reordering the
+      dependency into nonexistence.  Careful use of READ_ONCE() or
+      atomic{,64}_read() can help to preserve your control dependency.
+
+  (*) Control dependencies apply only to the then-clause and else-clause
+      of the "if" statement containing the control dependency, including
+      any functions that these two clauses call.  Control dependencies
+      do *not* apply to code beyond the end of that "if" statement.
+
+  (*) Control dependencies pair normally with other types of barriers.
+
+  (*) Control dependencies do *not* provide multicopy atomicity.  If you
+      need all the CPUs to agree on the ordering of a given store against
+      all other accesses, use smp_mb().
+
+  (*) Compilers do not understand control dependencies.  It is therefore
+      your job to ensure that they do not break your code.
diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt
new file mode 100644
index 000000000..ee819a402
--- /dev/null
+++ b/tools/memory-model/Documentation/explanation.txt
@@ -0,0 +1,2616 @@
+Explanation of the Linux-Kernel Memory Consistency Model
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+:Author: Alan Stern <stern@rowland.harvard.edu>
+:Created: October 2017
+
+.. Contents
+
+  1. INTRODUCTION
+  2. BACKGROUND
+  3. A SIMPLE EXAMPLE
+  4. A SELECTION OF MEMORY MODELS
+  5. ORDERING AND CYCLES
+  6. EVENTS
+  7. THE PROGRAM ORDER RELATION: po AND po-loc
+  8. A WARNING
+  9. DEPENDENCY RELATIONS: data, addr, and ctrl
+  10. THE READS-FROM RELATION: rf, rfi, and rfe
+  11. CACHE COHERENCE AND THE COHERENCE ORDER RELATION: co, coi, and coe
+  12. THE FROM-READS RELATION: fr, fri, and fre
+  13. AN OPERATIONAL MODEL
+  14. PROPAGATION ORDER RELATION: cumul-fence
+  15. DERIVATION OF THE LKMM FROM THE OPERATIONAL MODEL
+  16. SEQUENTIAL CONSISTENCY PER VARIABLE
+  17. ATOMIC UPDATES: rmw
+  18. THE PRESERVED PROGRAM ORDER RELATION: ppo
+  19. AND THEN THERE WAS ALPHA
+  20. THE HAPPENS-BEFORE RELATION: hb
+  21. THE PROPAGATES-BEFORE RELATION: pb
+  22. RCU RELATIONS: rcu-link, rcu-gp, rcu-rscsi, rcu-order, rcu-fence, and rb
+  23. LOCKING
+  24. PLAIN ACCESSES AND DATA RACES
+  25. ODDS AND ENDS
+
+
+
+INTRODUCTION
+------------
+
+The Linux-kernel memory consistency model (LKMM) is rather complex and
+obscure.  This is particularly evident if you read through the
+linux-kernel.bell and linux-kernel.cat files that make up the formal
+version of the model; they are extremely terse and their meanings are
+far from clear.
+
+This document describes the ideas underlying the LKMM.  It is meant
+for people who want to understand how the model was designed.  It does
+not go into the details of the code in the .bell and .cat files;
+rather, it explains in English what the code expresses symbolically.
+
+Sections 2 (BACKGROUND) through 5 (ORDERING AND CYCLES) are aimed
+toward beginners; they explain what memory consistency models are and
+the basic notions shared by all such models.  People already familiar
+with these concepts can skim or skip over them.  Sections 6 (EVENTS)
+through 12 (THE FROM_READS RELATION) describe the fundamental
+relations used in many models.  Starting in Section 13 (AN OPERATIONAL
+MODEL), the workings of the LKMM itself are covered.
+
+Warning: The code examples in this document are not written in the
+proper format for litmus tests.  They don't include a header line, the
+initializations are not enclosed in braces, the global variables are
+not passed by pointers, and they don't have an "exists" clause at the
+end.  Converting them to the right format is left as an exercise for
+the reader.
+
+
+BACKGROUND
+----------
+
+A memory consistency model (or just memory model, for short) is
+something which predicts, given a piece of computer code running on a
+particular kind of system, what values may be obtained by the code's
+load instructions.  The LKMM makes these predictions for code running
+as part of the Linux kernel.
+
+In practice, people tend to use memory models the other way around.
+That is, given a piece of code and a collection of values specified
+for the loads, the model will predict whether it is possible for the
+code to run in such a way that the loads will indeed obtain the
+specified values.  Of course, this is just another way of expressing
+the same idea.
+
+For code running on a uniprocessor system, the predictions are easy:
+Each load instruction must obtain the value written by the most recent
+store instruction accessing the same location (we ignore complicating
+factors such as DMA and mixed-size accesses.)  But on multiprocessor
+systems, with multiple CPUs making concurrent accesses to shared
+memory locations, things aren't so simple.
+
+Different architectures have differing memory models, and the Linux
+kernel supports a variety of architectures.  The LKMM has to be fairly
+permissive, in the sense that any behavior allowed by one of these
+architectures also has to be allowed by the LKMM.
+
+
+A SIMPLE EXAMPLE
+----------------
+
+Here is a simple example to illustrate the basic concepts.  Consider
+some code running as part of a device driver for an input device.  The
+driver might contain an interrupt handler which collects data from the
+device, stores it in a buffer, and sets a flag to indicate the buffer
+is full.  Running concurrently on a different CPU might be a part of
+the driver code being executed by a process in the midst of a read(2)
+system call.  This code tests the flag to see whether the buffer is
+ready, and if it is, copies the data back to userspace.  The buffer
+and the flag are memory locations shared between the two CPUs.
+
+We can abstract out the important pieces of the driver code as follows
+(the reason for using WRITE_ONCE() and READ_ONCE() instead of simple
+assignment statements is discussed later):
+
+	int buf = 0, flag = 0;
+
+	P0()
+	{
+		WRITE_ONCE(buf, 1);
+		WRITE_ONCE(flag, 1);
+	}
+
+	P1()
+	{
+		int r1;
+		int r2 = 0;
+
+		r1 = READ_ONCE(flag);
+		if (r1)
+			r2 = READ_ONCE(buf);
+	}
+
+Here the P0() function represents the interrupt handler running on one
+CPU and P1() represents the read() routine running on another.  The
+value 1 stored in buf represents input data collected from the device.
+Thus, P0 stores the data in buf and then sets flag.  Meanwhile, P1
+reads flag into the private variable r1, and if it is set, reads the
+data from buf into a second private variable r2 for copying to
+userspace.  (Presumably if flag is not set then the driver will wait a
+while and try again.)
+
+This pattern of memory accesses, where one CPU stores values to two
+shared memory locations and another CPU loads from those locations in
+the opposite order, is widely known as the "Message Passing" or MP
+pattern.  It is typical of memory access patterns in the kernel.
+
+Please note that this example code is a simplified abstraction.  Real
+buffers are usually larger than a single integer, real device drivers
+usually use sleep and wakeup mechanisms rather than polling for I/O
+completion, and real code generally doesn't bother to copy values into
+private variables before using them.  All that is beside the point;
+the idea here is simply to illustrate the overall pattern of memory
+accesses by the CPUs.
+
+A memory model will predict what values P1 might obtain for its loads
+from flag and buf, or equivalently, what values r1 and r2 might end up
+with after the code has finished running.
+
+Some predictions are trivial.  For instance, no sane memory model would
+predict that r1 = 42 or r2 = -7, because neither of those values ever
+gets stored in flag or buf.
+
+Some nontrivial predictions are nonetheless quite simple.  For
+instance, P1 might run entirely before P0 begins, in which case r1 and
+r2 will both be 0 at the end.  Or P0 might run entirely before P1
+begins, in which case r1 and r2 will both be 1.
+
+The interesting predictions concern what might happen when the two
+routines run concurrently.  One possibility is that P1 runs after P0's
+store to buf but before the store to flag.  In this case, r1 and r2
+will again both be 0.  (If P1 had been designed to read buf
+unconditionally then we would instead have r1 = 0 and r2 = 1.)
+
+However, the most interesting possibility is where r1 = 1 and r2 = 0.
+If this were to occur it would mean the driver contains a bug, because
+incorrect data would get sent to the user: 0 instead of 1.  As it
+happens, the LKMM does predict this outcome can occur, and the example
+driver code shown above is indeed buggy.
+
+
+A SELECTION OF MEMORY MODELS
+----------------------------
+
+The first widely cited memory model, and the simplest to understand,
+is Sequential Consistency.  According to this model, systems behave as
+if each CPU executed its instructions in order but with unspecified
+timing.  In other words, the instructions from the various CPUs get
+interleaved in a nondeterministic way, always according to some single
+global order that agrees with the order of the instructions in the
+program source for each CPU.  The model says that the value obtained
+by each load is simply the value written by the most recently executed
+store to the same memory location, from any CPU.
+
+For the MP example code shown above, Sequential Consistency predicts
+that the undesired result r1 = 1, r2 = 0 cannot occur.  The reasoning
+goes like this:
+
+	Since r1 = 1, P0 must store 1 to flag before P1 loads 1 from
+	it, as loads can obtain values only from earlier stores.
+
+	P1 loads from flag before loading from buf, since CPUs execute
+	their instructions in order.
+
+	P1 must load 0 from buf before P0 stores 1 to it; otherwise r2
+	would be 1 since a load obtains its value from the most recent
+	store to the same address.
+
+	P0 stores 1 to buf before storing 1 to flag, since it executes
+	its instructions in order.
+
+	Since an instruction (in this case, P0's store to flag) cannot
+	execute before itself, the specified outcome is impossible.
+
+However, real computer hardware almost never follows the Sequential
+Consistency memory model; doing so would rule out too many valuable
+performance optimizations.  On ARM and PowerPC architectures, for
+instance, the MP example code really does sometimes yield r1 = 1 and
+r2 = 0.
+
+x86 and SPARC follow yet a different memory model: TSO (Total Store
+Ordering).  This model predicts that the undesired outcome for the MP
+pattern cannot occur, but in other respects it differs from Sequential
+Consistency.  One example is the Store Buffer (SB) pattern, in which
+each CPU stores to its own shared location and then loads from the
+other CPU's location:
+
+	int x = 0, y = 0;
+
+	P0()
+	{
+		int r0;
+
+		WRITE_ONCE(x, 1);
+		r0 = READ_ONCE(y);
+	}
+
+	P1()
+	{
+		int r1;
+
+		WRITE_ONCE(y, 1);
+		r1 = READ_ONCE(x);
+	}
+
+Sequential Consistency predicts that the outcome r0 = 0, r1 = 0 is
+impossible.  (Exercise: Figure out the reasoning.)  But TSO allows
+this outcome to occur, and in fact it does sometimes occur on x86 and
+SPARC systems.
+
+The LKMM was inspired by the memory models followed by PowerPC, ARM,
+x86, Alpha, and other architectures.  However, it is different in
+detail from each of them.
+
+
+ORDERING AND CYCLES
+-------------------
+
+Memory models are all about ordering.  Often this is temporal ordering
+(i.e., the order in which certain events occur) but it doesn't have to
+be; consider for example the order of instructions in a program's
+source code.  We saw above that Sequential Consistency makes an
+important assumption that CPUs execute instructions in the same order
+as those instructions occur in the code, and there are many other
+instances of ordering playing central roles in memory models.
+
+The counterpart to ordering is a cycle.  Ordering rules out cycles:
+It's not possible to have X ordered before Y, Y ordered before Z, and
+Z ordered before X, because this would mean that X is ordered before
+itself.  The analysis of the MP example under Sequential Consistency
+involved just such an impossible cycle:
+
+	W: P0 stores 1 to flag   executes before
+	X: P1 loads 1 from flag  executes before
+	Y: P1 loads 0 from buf   executes before
+	Z: P0 stores 1 to buf    executes before
+	W: P0 stores 1 to flag.
+
+In short, if a memory model requires certain accesses to be ordered,
+and a certain outcome for the loads in a piece of code can happen only
+if those accesses would form a cycle, then the memory model predicts
+that outcome cannot occur.
+
+The LKMM is defined largely in terms of cycles, as we will see.
+
+
+EVENTS
+------
+
+The LKMM does not work directly with the C statements that make up
+kernel source code.  Instead it considers the effects of those
+statements in a more abstract form, namely, events.  The model
+includes three types of events:
+
+	Read events correspond to loads from shared memory, such as
+	calls to READ_ONCE(), smp_load_acquire(), or
+	rcu_dereference().
+
+	Write events correspond to stores to shared memory, such as
+	calls to WRITE_ONCE(), smp_store_release(), or atomic_set().
+
+	Fence events correspond to memory barriers (also known as
+	fences), such as calls to smp_rmb() or rcu_read_lock().
+
+These categories are not exclusive; a read or write event can also be
+a fence.  This happens with functions like smp_load_acquire() or
+spin_lock().  However, no single event can be both a read and a write.
+Atomic read-modify-write accesses, such as atomic_inc() or xchg(),
+correspond to a pair of events: a read followed by a write.  (The
+write event is omitted for executions where it doesn't occur, such as
+a cmpxchg() where the comparison fails.)
+
+Other parts of the code, those which do not involve interaction with
+shared memory, do not give rise to events.  Thus, arithmetic and
+logical computations, control-flow instructions, or accesses to
+private memory or CPU registers are not of central interest to the
+memory model.  They only affect the model's predictions indirectly.
+For example, an arithmetic computation might determine the value that
+gets stored to a shared memory location (or in the case of an array
+index, the address where the value gets stored), but the memory model
+is concerned only with the store itself -- its value and its address
+-- not the computation leading up to it.
+
+Events in the LKMM can be linked by various relations, which we will
+describe in the following sections.  The memory model requires certain
+of these relations to be orderings, that is, it requires them not to
+have any cycles.
+
+
+THE PROGRAM ORDER RELATION: po AND po-loc
+-----------------------------------------
+
+The most important relation between events is program order (po).  You
+can think of it as the order in which statements occur in the source
+code after branches are taken into account and loops have been
+unrolled.  A better description might be the order in which
+instructions are presented to a CPU's execution unit.  Thus, we say
+that X is po-before Y (written as "X ->po Y" in formulas) if X occurs
+before Y in the instruction stream.
+
+This is inherently a single-CPU relation; two instructions executing
+on different CPUs are never linked by po.  Also, it is by definition
+an ordering so it cannot have any cycles.
+
+po-loc is a sub-relation of po.  It links two memory accesses when the
+first comes before the second in program order and they access the
+same memory location (the "-loc" suffix).
+
+Although this may seem straightforward, there is one subtle aspect to
+program order we need to explain.  The LKMM was inspired by low-level
+architectural memory models which describe the behavior of machine
+code, and it retains their outlook to a considerable extent.  The
+read, write, and fence events used by the model are close in spirit to
+individual machine instructions.  Nevertheless, the LKMM describes
+kernel code written in C, and the mapping from C to machine code can
+be extremely complex.
+
+Optimizing compilers have great freedom in the way they translate
+source code to object code.  They are allowed to apply transformations
+that add memory accesses, eliminate accesses, combine them, split them
+into pieces, or move them around.  The use of READ_ONCE(), WRITE_ONCE(),
+or one of the other atomic or synchronization primitives prevents a
+large number of compiler optimizations.  In particular, it is guaranteed
+that the compiler will not remove such accesses from the generated code
+(unless it can prove the accesses will never be executed), it will not
+change the order in which they occur in the code (within limits imposed
+by the C standard), and it will not introduce extraneous accesses.
+
+The MP and SB examples above used READ_ONCE() and WRITE_ONCE() rather
+than ordinary memory accesses.  Thanks to this usage, we can be certain
+that in the MP example, the compiler won't reorder P0's write event to
+buf and P0's write event to flag, and similarly for the other shared
+memory accesses in the examples.
+
+Since private variables are not shared between CPUs, they can be
+accessed normally without READ_ONCE() or WRITE_ONCE().  In fact, they
+need not even be stored in normal memory at all -- in principle a
+private variable could be stored in a CPU register (hence the convention
+that these variables have names starting with the letter 'r').
+
+
+A WARNING
+---------
+
+The protections provided by READ_ONCE(), WRITE_ONCE(), and others are
+not perfect; and under some circumstances it is possible for the
+compiler to undermine the memory model.  Here is an example.  Suppose
+both branches of an "if" statement store the same value to the same
+location:
+
+	r1 = READ_ONCE(x);
+	if (r1) {
+		WRITE_ONCE(y, 2);
+		...  /* do something */
+	} else {
+		WRITE_ONCE(y, 2);
+		...  /* do something else */
+	}
+
+For this code, the LKMM predicts that the load from x will always be
+executed before either of the stores to y.  However, a compiler could
+lift the stores out of the conditional, transforming the code into
+something resembling:
+
+	r1 = READ_ONCE(x);
+	WRITE_ONCE(y, 2);
+	if (r1) {
+		...  /* do something */
+	} else {
+		...  /* do something else */
+	}
+
+Given this version of the code, the LKMM would predict that the load
+from x could be executed after the store to y.  Thus, the memory
+model's original prediction could be invalidated by the compiler.
+
+Another issue arises from the fact that in C, arguments to many
+operators and function calls can be evaluated in any order.  For
+example:
+
+	r1 = f(5) + g(6);
+
+The object code might call f(5) either before or after g(6); the
+memory model cannot assume there is a fixed program order relation
+between them.  (In fact, if the function calls are inlined then the
+compiler might even interleave their object code.)
+
+
+DEPENDENCY RELATIONS: data, addr, and ctrl
+------------------------------------------
+
+We say that two events are linked by a dependency relation when the
+execution of the second event depends in some way on a value obtained
+from memory by the first.  The first event must be a read, and the
+value it obtains must somehow affect what the second event does.
+There are three kinds of dependencies: data, address (addr), and
+control (ctrl).
+
+A read and a write event are linked by a data dependency if the value
+obtained by the read affects the value stored by the write.  As a very
+simple example:
+
+	int x, y;
+
+	r1 = READ_ONCE(x);
+	WRITE_ONCE(y, r1 + 5);
+
+The value stored by the WRITE_ONCE obviously depends on the value
+loaded by the READ_ONCE.  Such dependencies can wind through
+arbitrarily complicated computations, and a write can depend on the
+values of multiple reads.
+
+A read event and another memory access event are linked by an address
+dependency if the value obtained by the read affects the location
+accessed by the other event.  The second event can be either a read or
+a write.  Here's another simple example:
+
+	int a[20];
+	int i;
+
+	r1 = READ_ONCE(i);
+	r2 = READ_ONCE(a[r1]);
+
+Here the location accessed by the second READ_ONCE() depends on the
+index value loaded by the first.  Pointer indirection also gives rise
+to address dependencies, since the address of a location accessed
+through a pointer will depend on the value read earlier from that
+pointer.
+
+Finally, a read event and another memory access event are linked by a
+control dependency if the value obtained by the read affects whether
+the second event is executed at all.  Simple example:
+
+	int x, y;
+
+	r1 = READ_ONCE(x);
+	if (r1)
+		WRITE_ONCE(y, 1984);
+
+Execution of the WRITE_ONCE() is controlled by a conditional expression
+which depends on the value obtained by the READ_ONCE(); hence there is
+a control dependency from the load to the store.
+
+It should be pretty obvious that events can only depend on reads that
+come earlier in program order.  Symbolically, if we have R ->data X,
+R ->addr X, or R ->ctrl X (where R is a read event), then we must also
+have R ->po X.  It wouldn't make sense for a computation to depend
+somehow on a value that doesn't get loaded from shared memory until
+later in the code!
+
+Here's a trick question: When is a dependency not a dependency?  Answer:
+When it is purely syntactic rather than semantic.  We say a dependency
+between two accesses is purely syntactic if the second access doesn't
+actually depend on the result of the first.  Here is a trivial example:
+
+	r1 = READ_ONCE(x);
+	WRITE_ONCE(y, r1 * 0);
+
+There appears to be a data dependency from the load of x to the store
+of y, since the value to be stored is computed from the value that was
+loaded.  But in fact, the value stored does not really depend on
+anything since it will always be 0.  Thus the data dependency is only
+syntactic (it appears to exist in the code) but not semantic (the
+second access will always be the same, regardless of the value of the
+first access).  Given code like this, a compiler could simply discard
+the value returned by the load from x, which would certainly destroy
+any dependency.  (The compiler is not permitted to eliminate entirely
+the load generated for a READ_ONCE() -- that's one of the nice
+properties of READ_ONCE() -- but it is allowed to ignore the load's
+value.)
+
+It's natural to object that no one in their right mind would write
+code like the above.  However, macro expansions can easily give rise
+to this sort of thing, in ways that often are not apparent to the
+programmer.
+
+Another mechanism that can lead to purely syntactic dependencies is
+related to the notion of "undefined behavior".  Certain program
+behaviors are called "undefined" in the C language specification,
+which means that when they occur there are no guarantees at all about
+the outcome.  Consider the following example:
+
+	int a[1];
+	int i;
+
+	r1 = READ_ONCE(i);
+	r2 = READ_ONCE(a[r1]);
+
+Access beyond the end or before the beginning of an array is one kind
+of undefined behavior.  Therefore the compiler doesn't have to worry
+about what will happen if r1 is nonzero, and it can assume that r1
+will always be zero regardless of the value actually loaded from i.
+(If the assumption turns out to be wrong the resulting behavior will
+be undefined anyway, so the compiler doesn't care!)  Thus the value
+from the load can be discarded, breaking the address dependency.
+
+The LKMM is unaware that purely syntactic dependencies are different
+from semantic dependencies and therefore mistakenly predicts that the
+accesses in the two examples above will be ordered.  This is another
+example of how the compiler can undermine the memory model.  Be warned.
+
+
+THE READS-FROM RELATION: rf, rfi, and rfe
+-----------------------------------------
+
+The reads-from relation (rf) links a write event to a read event when
+the value loaded by the read is the value that was stored by the
+write.  In colloquial terms, the load "reads from" the store.  We
+write W ->rf R to indicate that the load R reads from the store W.  We
+further distinguish the cases where the load and the store occur on
+the same CPU (internal reads-from, or rfi) and where they occur on
+different CPUs (external reads-from, or rfe).
+
+For our purposes, a memory location's initial value is treated as
+though it had been written there by an imaginary initial store that
+executes on a separate CPU before the main program runs.
+
+Usage of the rf relation implicitly assumes that loads will always
+read from a single store.  It doesn't apply properly in the presence
+of load-tearing, where a load obtains some of its bits from one store
+and some of them from another store.  Fortunately, use of READ_ONCE()
+and WRITE_ONCE() will prevent load-tearing; it's not possible to have:
+
+	int x = 0;
+
+	P0()
+	{
+		WRITE_ONCE(x, 0x1234);
+	}
+
+	P1()
+	{
+		int r1;
+
+		r1 = READ_ONCE(x);
+	}
+
+and end up with r1 = 0x1200 (partly from x's initial value and partly
+from the value stored by P0).
+
+On the other hand, load-tearing is unavoidable when mixed-size
+accesses are used.  Consider this example:
+
+	union {
+		u32	w;
+		u16	h[2];
+	} x;
+
+	P0()
+	{
+		WRITE_ONCE(x.h[0], 0x1234);
+		WRITE_ONCE(x.h[1], 0x5678);
+	}
+
+	P1()
+	{
+		int r1;
+
+		r1 = READ_ONCE(x.w);
+	}
+
+If r1 = 0x56781234 (little-endian!) at the end, then P1 must have read
+from both of P0's stores.  It is possible to handle mixed-size and
+unaligned accesses in a memory model, but the LKMM currently does not
+attempt to do so.  It requires all accesses to be properly aligned and
+of the location's actual size.
+
+
+CACHE COHERENCE AND THE COHERENCE ORDER RELATION: co, coi, and coe
+------------------------------------------------------------------
+
+Cache coherence is a general principle requiring that in a
+multi-processor system, the CPUs must share a consistent view of the
+memory contents.  Specifically, it requires that for each location in
+shared memory, the stores to that location must form a single global
+ordering which all the CPUs agree on (the coherence order), and this
+ordering must be consistent with the program order for accesses to
+that location.
+
+To put it another way, for any variable x, the coherence order (co) of
+the stores to x is simply the order in which the stores overwrite one
+another.  The imaginary store which establishes x's initial value
+comes first in the coherence order; the store which directly
+overwrites the initial value comes second; the store which overwrites
+that value comes third, and so on.
+
+You can think of the coherence order as being the order in which the
+stores reach x's location in memory (or if you prefer a more
+hardware-centric view, the order in which the stores get written to
+x's cache line).  We write W ->co W' if W comes before W' in the
+coherence order, that is, if the value stored by W gets overwritten,
+directly or indirectly, by the value stored by W'.
+
+Coherence order is required to be consistent with program order.  This
+requirement takes the form of four coherency rules:
+
+	Write-write coherence: If W ->po-loc W' (i.e., W comes before
+	W' in program order and they access the same location), where W
+	and W' are two stores, then W ->co W'.
+
+	Write-read coherence: If W ->po-loc R, where W is a store and R
+	is a load, then R must read from W or from some other store
+	which comes after W in the coherence order.
+
+	Read-write coherence: If R ->po-loc W, where R is a load and W
+	is a store, then the store which R reads from must come before
+	W in the coherence order.
+
+	Read-read coherence: If R ->po-loc R', where R and R' are two
+	loads, then either they read from the same store or else the
+	store read by R comes before the store read by R' in the
+	coherence order.
+
+This is sometimes referred to as sequential consistency per variable,
+because it means that the accesses to any single memory location obey
+the rules of the Sequential Consistency memory model.  (According to
+Wikipedia, sequential consistency per variable and cache coherence
+mean the same thing except that cache coherence includes an extra
+requirement that every store eventually becomes visible to every CPU.)
+
+Any reasonable memory model will include cache coherence.  Indeed, our
+expectation of cache coherence is so deeply ingrained that violations
+of its requirements look more like hardware bugs than programming
+errors:
+
+	int x;
+
+	P0()
+	{
+		WRITE_ONCE(x, 17);
+		WRITE_ONCE(x, 23);
+	}
+
+If the final value stored in x after this code ran was 17, you would
+think your computer was broken.  It would be a violation of the
+write-write coherence rule: Since the store of 23 comes later in
+program order, it must also come later in x's coherence order and
+thus must overwrite the store of 17.
+
+	int x = 0;
+
+	P0()
+	{
+		int r1;
+
+		r1 = READ_ONCE(x);
+		WRITE_ONCE(x, 666);
+	}
+
+If r1 = 666 at the end, this would violate the read-write coherence
+rule: The READ_ONCE() load comes before the WRITE_ONCE() store in
+program order, so it must not read from that store but rather from one
+coming earlier in the coherence order (in this case, x's initial
+value).
+
+	int x = 0;
+
+	P0()
+	{
+		WRITE_ONCE(x, 5);
+	}
+
+	P1()
+	{
+		int r1, r2;
+
+		r1 = READ_ONCE(x);
+		r2 = READ_ONCE(x);
+	}
+
+If r1 = 5 (reading from P0's store) and r2 = 0 (reading from the
+imaginary store which establishes x's initial value) at the end, this
+would violate the read-read coherence rule: The r1 load comes before
+the r2 load in program order, so it must not read from a store that
+comes later in the coherence order.
+
+(As a minor curiosity, if this code had used normal loads instead of
+READ_ONCE() in P1, on Itanium it sometimes could end up with r1 = 5
+and r2 = 0!  This results from parallel execution of the operations
+encoded in Itanium's Very-Long-Instruction-Word format, and it is yet
+another motivation for using READ_ONCE() when accessing shared memory
+locations.)
+
+Just like the po relation, co is inherently an ordering -- it is not
+possible for a store to directly or indirectly overwrite itself!  And
+just like with the rf relation, we distinguish between stores that
+occur on the same CPU (internal coherence order, or coi) and stores
+that occur on different CPUs (external coherence order, or coe).
+
+On the other hand, stores to different memory locations are never
+related by co, just as instructions on different CPUs are never
+related by po.  Coherence order is strictly per-location, or if you
+prefer, each location has its own independent coherence order.
+
+
+THE FROM-READS RELATION: fr, fri, and fre
+-----------------------------------------
+
+The from-reads relation (fr) can be a little difficult for people to
+grok.  It describes the situation where a load reads a value that gets
+overwritten by a store.  In other words, we have R ->fr W when the
+value that R reads is overwritten (directly or indirectly) by W, or
+equivalently, when R reads from a store which comes earlier than W in
+the coherence order.
+
+For example:
+
+	int x = 0;
+
+	P0()
+	{
+		int r1;
+
+		r1 = READ_ONCE(x);
+		WRITE_ONCE(x, 2);
+	}
+
+The value loaded from x will be 0 (assuming cache coherence!), and it
+gets overwritten by the value 2.  Thus there is an fr link from the
+READ_ONCE() to the WRITE_ONCE().  If the code contained any later
+stores to x, there would also be fr links from the READ_ONCE() to
+them.
+
+As with rf, rfi, and rfe, we subdivide the fr relation into fri (when
+the load and the store are on the same CPU) and fre (when they are on
+different CPUs).
+
+Note that the fr relation is determined entirely by the rf and co
+relations; it is not independent.  Given a read event R and a write
+event W for the same location, we will have R ->fr W if and only if
+the write which R reads from is co-before W.  In symbols,
+
+	(R ->fr W) := (there exists W' with W' ->rf R and W' ->co W).
+
+
+AN OPERATIONAL MODEL
+--------------------
+
+The LKMM is based on various operational memory models, meaning that
+the models arise from an abstract view of how a computer system
+operates.  Here are the main ideas, as incorporated into the LKMM.
+
+The system as a whole is divided into the CPUs and a memory subsystem.
+The CPUs are responsible for executing instructions (not necessarily
+in program order), and they communicate with the memory subsystem.
+For the most part, executing an instruction requires a CPU to perform
+only internal operations.  However, loads, stores, and fences involve
+more.
+
+When CPU C executes a store instruction, it tells the memory subsystem
+to store a certain value at a certain location.  The memory subsystem
+propagates the store to all the other CPUs as well as to RAM.  (As a
+special case, we say that the store propagates to its own CPU at the
+time it is executed.)  The memory subsystem also determines where the
+store falls in the location's coherence order.  In particular, it must
+arrange for the store to be co-later than (i.e., to overwrite) any
+other store to the same location which has already propagated to CPU C.
+
+When a CPU executes a load instruction R, it first checks to see
+whether there are any as-yet unexecuted store instructions, for the
+same location, that come before R in program order.  If there are, it
+uses the value of the po-latest such store as the value obtained by R,
+and we say that the store's value is forwarded to R.  Otherwise, the
+CPU asks the memory subsystem for the value to load and we say that R
+is satisfied from memory.  The memory subsystem hands back the value
+of the co-latest store to the location in question which has already
+propagated to that CPU.
+
+(In fact, the picture needs to be a little more complicated than this.
+CPUs have local caches, and propagating a store to a CPU really means
+propagating it to the CPU's local cache.  A local cache can take some
+time to process the stores that it receives, and a store can't be used
+to satisfy one of the CPU's loads until it has been processed.  On
+most architectures, the local caches process stores in
+First-In-First-Out order, and consequently the processing delay
+doesn't matter for the memory model.  But on Alpha, the local caches
+have a partitioned design that results in non-FIFO behavior.  We will
+discuss this in more detail later.)
+
+Note that load instructions may be executed speculatively and may be
+restarted under certain circumstances.  The memory model ignores these
+premature executions; we simply say that the load executes at the
+final time it is forwarded or satisfied.
+
+Executing a fence (or memory barrier) instruction doesn't require a
+CPU to do anything special other than informing the memory subsystem
+about the fence.  However, fences do constrain the way CPUs and the
+memory subsystem handle other instructions, in two respects.
+
+First, a fence forces the CPU to execute various instructions in
+program order.  Exactly which instructions are ordered depends on the
+type of fence:
+
+	Strong fences, including smp_mb() and synchronize_rcu(), force
+	the CPU to execute all po-earlier instructions before any
+	po-later instructions;
+
+	smp_rmb() forces the CPU to execute all po-earlier loads
+	before any po-later loads;
+
+	smp_wmb() forces the CPU to execute all po-earlier stores
+	before any po-later stores;
+
+	Acquire fences, such as smp_load_acquire(), force the CPU to
+	execute the load associated with the fence (e.g., the load
+	part of an smp_load_acquire()) before any po-later
+	instructions;
+
+	Release fences, such as smp_store_release(), force the CPU to
+	execute all po-earlier instructions before the store
+	associated with the fence (e.g., the store part of an
+	smp_store_release()).
+
+Second, some types of fence affect the way the memory subsystem
+propagates stores.  When a fence instruction is executed on CPU C:
+
+	For each other CPU C', smp_wmb() forces all po-earlier stores
+	on C to propagate to C' before any po-later stores do.
+
+	For each other CPU C', any store which propagates to C before
+	a release fence is executed (including all po-earlier
+	stores executed on C) is forced to propagate to C' before the
+	store associated with the release fence does.
+
+	Any store which propagates to C before a strong fence is
+	executed (including all po-earlier stores on C) is forced to
+	propagate to all other CPUs before any instructions po-after
+	the strong fence are executed on C.
+
+The propagation ordering enforced by release fences and strong fences
+affects stores from other CPUs that propagate to CPU C before the
+fence is executed, as well as stores that are executed on C before the
+fence.  We describe this property by saying that release fences and
+strong fences are A-cumulative.  By contrast, smp_wmb() fences are not
+A-cumulative; they only affect the propagation of stores that are
+executed on C before the fence (i.e., those which precede the fence in
+program order).
+
+rcu_read_lock(), rcu_read_unlock(), and synchronize_rcu() fences have
+other properties which we discuss later.
+
+
+PROPAGATION ORDER RELATION: cumul-fence
+---------------------------------------
+
+The fences which affect propagation order (i.e., strong, release, and
+smp_wmb() fences) are collectively referred to as cumul-fences, even
+though smp_wmb() isn't A-cumulative.  The cumul-fence relation is
+defined to link memory access events E and F whenever:
+
+	E and F are both stores on the same CPU and an smp_wmb() fence
+	event occurs between them in program order; or
+
+	F is a release fence and some X comes before F in program order,
+	where either X = E or else E ->rf X; or
+
+	A strong fence event occurs between some X and F in program
+	order, where either X = E or else E ->rf X.
+
+The operational model requires that whenever W and W' are both stores
+and W ->cumul-fence W', then W must propagate to any given CPU
+before W' does.  However, for different CPUs C and C', it does not
+require W to propagate to C before W' propagates to C'.
+
+
+DERIVATION OF THE LKMM FROM THE OPERATIONAL MODEL
+-------------------------------------------------
+
+The LKMM is derived from the restrictions imposed by the design
+outlined above.  These restrictions involve the necessity of
+maintaining cache coherence and the fact that a CPU can't operate on a
+value before it knows what that value is, among other things.
+
+The formal version of the LKMM is defined by six requirements, or
+axioms:
+
+	Sequential consistency per variable: This requires that the
+	system obey the four coherency rules.
+
+	Atomicity: This requires that atomic read-modify-write
+	operations really are atomic, that is, no other stores can
+	sneak into the middle of such an update.
+
+	Happens-before: This requires that certain instructions are
+	executed in a specific order.
+
+	Propagation: This requires that certain stores propagate to
+	CPUs and to RAM in a specific order.
+
+	Rcu: This requires that RCU read-side critical sections and
+	grace periods obey the rules of RCU, in particular, the
+	Grace-Period Guarantee.
+
+	Plain-coherence: This requires that plain memory accesses
+	(those not using READ_ONCE(), WRITE_ONCE(), etc.) must obey
+	the operational model's rules regarding cache coherence.
+
+The first and second are quite common; they can be found in many
+memory models (such as those for C11/C++11).  The "happens-before" and
+"propagation" axioms have analogs in other memory models as well.  The
+"rcu" and "plain-coherence" axioms are specific to the LKMM.
+
+Each of these axioms is discussed below.
+
+
+SEQUENTIAL CONSISTENCY PER VARIABLE
+-----------------------------------
+
+According to the principle of cache coherence, the stores to any fixed
+shared location in memory form a global ordering.  We can imagine
+inserting the loads from that location into this ordering, by placing
+each load between the store that it reads from and the following
+store.  This leaves the relative positions of loads that read from the
+same store unspecified; let's say they are inserted in program order,
+first for CPU 0, then CPU 1, etc.
+
+You can check that the four coherency rules imply that the rf, co, fr,
+and po-loc relations agree with this global ordering; in other words,
+whenever we have X ->rf Y or X ->co Y or X ->fr Y or X ->po-loc Y, the
+X event comes before the Y event in the global ordering.  The LKMM's
+"coherence" axiom expresses this by requiring the union of these
+relations not to have any cycles.  This means it must not be possible
+to find events
+
+	X0 -> X1 -> X2 -> ... -> Xn -> X0,
+
+where each of the links is either rf, co, fr, or po-loc.  This has to
+hold if the accesses to the fixed memory location can be ordered as
+cache coherence demands.
+
+Although it is not obvious, it can be shown that the converse is also
+true: This LKMM axiom implies that the four coherency rules are
+obeyed.
+
+
+ATOMIC UPDATES: rmw
+-------------------
+
+What does it mean to say that a read-modify-write (rmw) update, such
+as atomic_inc(&x), is atomic?  It means that the memory location (x in
+this case) does not get altered between the read and the write events
+making up the atomic operation.  In particular, if two CPUs perform
+atomic_inc(&x) concurrently, it must be guaranteed that the final
+value of x will be the initial value plus two.  We should never have
+the following sequence of events:
+
+	CPU 0 loads x obtaining 13;
+					CPU 1 loads x obtaining 13;
+	CPU 0 stores 14 to x;
+					CPU 1 stores 14 to x;
+
+where the final value of x is wrong (14 rather than 15).
+
+In this example, CPU 0's increment effectively gets lost because it
+occurs in between CPU 1's load and store.  To put it another way, the
+problem is that the position of CPU 0's store in x's coherence order
+is between the store that CPU 1 reads from and the store that CPU 1
+performs.
+
+The same analysis applies to all atomic update operations.  Therefore,
+to enforce atomicity the LKMM requires that atomic updates follow this
+rule: Whenever R and W are the read and write events composing an
+atomic read-modify-write and W' is the write event which R reads from,
+there must not be any stores coming between W' and W in the coherence
+order.  Equivalently,
+
+	(R ->rmw W) implies (there is no X with R ->fr X and X ->co W),
+
+where the rmw relation links the read and write events making up each
+atomic update.  This is what the LKMM's "atomic" axiom says.
+
+
+THE PRESERVED PROGRAM ORDER RELATION: ppo
+-----------------------------------------
+
+There are many situations where a CPU is obliged to execute two
+instructions in program order.  We amalgamate them into the ppo (for
+"preserved program order") relation, which links the po-earlier
+instruction to the po-later instruction and is thus a sub-relation of
+po.
+
+The operational model already includes a description of one such
+situation: Fences are a source of ppo links.  Suppose X and Y are
+memory accesses with X ->po Y; then the CPU must execute X before Y if
+any of the following hold:
+
+	A strong (smp_mb() or synchronize_rcu()) fence occurs between
+	X and Y;
+
+	X and Y are both stores and an smp_wmb() fence occurs between
+	them;
+
+	X and Y are both loads and an smp_rmb() fence occurs between
+	them;
+
+	X is also an acquire fence, such as smp_load_acquire();
+
+	Y is also a release fence, such as smp_store_release().
+
+Another possibility, not mentioned earlier but discussed in the next
+section, is:
+
+	X and Y are both loads, X ->addr Y (i.e., there is an address
+	dependency from X to Y), and X is a READ_ONCE() or an atomic
+	access.
+
+Dependencies can also cause instructions to be executed in program
+order.  This is uncontroversial when the second instruction is a
+store; either a data, address, or control dependency from a load R to
+a store W will force the CPU to execute R before W.  This is very
+simply because the CPU cannot tell the memory subsystem about W's
+store before it knows what value should be stored (in the case of a
+data dependency), what location it should be stored into (in the case
+of an address dependency), or whether the store should actually take
+place (in the case of a control dependency).
+
+Dependencies to load instructions are more problematic.  To begin with,
+there is no such thing as a data dependency to a load.  Next, a CPU
+has no reason to respect a control dependency to a load, because it
+can always satisfy the second load speculatively before the first, and
+then ignore the result if it turns out that the second load shouldn't
+be executed after all.  And lastly, the real difficulties begin when
+we consider address dependencies to loads.
+
+To be fair about it, all Linux-supported architectures do execute
+loads in program order if there is an address dependency between them.
+After all, a CPU cannot ask the memory subsystem to load a value from
+a particular location before it knows what that location is.  However,
+the split-cache design used by Alpha can cause it to behave in a way
+that looks as if the loads were executed out of order (see the next
+section for more details).  The kernel includes a workaround for this
+problem when the loads come from READ_ONCE(), and therefore the LKMM
+includes address dependencies to loads in the ppo relation.
+
+On the other hand, dependencies can indirectly affect the ordering of
+two loads.  This happens when there is a dependency from a load to a
+store and a second, po-later load reads from that store:
+
+	R ->dep W ->rfi R',
+
+where the dep link can be either an address or a data dependency.  In
+this situation we know it is possible for the CPU to execute R' before
+W, because it can forward the value that W will store to R'.  But it
+cannot execute R' before R, because it cannot forward the value before
+it knows what that value is, or that W and R' do access the same
+location.  However, if there is merely a control dependency between R
+and W then the CPU can speculatively forward W to R' before executing
+R; if the speculation turns out to be wrong then the CPU merely has to
+restart or abandon R'.
+
+(In theory, a CPU might forward a store to a load when it runs across
+an address dependency like this:
+
+	r1 = READ_ONCE(ptr);
+	WRITE_ONCE(*r1, 17);
+	r2 = READ_ONCE(*r1);
+
+because it could tell that the store and the second load access the
+same location even before it knows what the location's address is.
+However, none of the architectures supported by the Linux kernel do
+this.)
+
+Two memory accesses of the same location must always be executed in
+program order if the second access is a store.  Thus, if we have
+
+	R ->po-loc W
+
+(the po-loc link says that R comes before W in program order and they
+access the same location), the CPU is obliged to execute W after R.
+If it executed W first then the memory subsystem would respond to R's
+read request with the value stored by W (or an even later store), in
+violation of the read-write coherence rule.  Similarly, if we had
+
+	W ->po-loc W'
+
+and the CPU executed W' before W, then the memory subsystem would put
+W' before W in the coherence order.  It would effectively cause W to
+overwrite W', in violation of the write-write coherence rule.
+(Interestingly, an early ARMv8 memory model, now obsolete, proposed
+allowing out-of-order writes like this to occur.  The model avoided
+violating the write-write coherence rule by requiring the CPU not to
+send the W write to the memory subsystem at all!)
+
+
+AND THEN THERE WAS ALPHA
+------------------------
+
+As mentioned above, the Alpha architecture is unique in that it does
+not appear to respect address dependencies to loads.  This means that
+code such as the following:
+
+	int x = 0;
+	int y = -1;
+	int *ptr = &y;
+
+	P0()
+	{
+		WRITE_ONCE(x, 1);
+		smp_wmb();
+		WRITE_ONCE(ptr, &x);
+	}
+
+	P1()
+	{
+		int *r1;
+		int r2;
+
+		r1 = ptr;
+		r2 = READ_ONCE(*r1);
+	}
+
+can malfunction on Alpha systems (notice that P1 uses an ordinary load
+to read ptr instead of READ_ONCE()).  It is quite possible that r1 = &x
+and r2 = 0 at the end, in spite of the address dependency.
+
+At first glance this doesn't seem to make sense.  We know that the
+smp_wmb() forces P0's store to x to propagate to P1 before the store
+to ptr does.  And since P1 can't execute its second load
+until it knows what location to load from, i.e., after executing its
+first load, the value x = 1 must have propagated to P1 before the
+second load executed.  So why doesn't r2 end up equal to 1?
+
+The answer lies in the Alpha's split local caches.  Although the two
+stores do reach P1's local cache in the proper order, it can happen
+that the first store is processed by a busy part of the cache while
+the second store is processed by an idle part.  As a result, the x = 1
+value may not become available for P1's CPU to read until after the
+ptr = &x value does, leading to the undesirable result above.  The
+final effect is that even though the two loads really are executed in
+program order, it appears that they aren't.
+
+This could not have happened if the local cache had processed the
+incoming stores in FIFO order.  By contrast, other architectures
+maintain at least the appearance of FIFO order.
+
+In practice, this difficulty is solved by inserting a special fence
+between P1's two loads when the kernel is compiled for the Alpha
+architecture.  In fact, as of version 4.15, the kernel automatically
+adds this fence after every READ_ONCE() and atomic load on Alpha.  The
+effect of the fence is to cause the CPU not to execute any po-later
+instructions until after the local cache has finished processing all
+the stores it has already received.  Thus, if the code was changed to:
+
+	P1()
+	{
+		int *r1;
+		int r2;
+
+		r1 = READ_ONCE(ptr);
+		r2 = READ_ONCE(*r1);
+	}
+
+then we would never get r1 = &x and r2 = 0.  By the time P1 executed
+its second load, the x = 1 store would already be fully processed by
+the local cache and available for satisfying the read request.  Thus
+we have yet another reason why shared data should always be read with
+READ_ONCE() or another synchronization primitive rather than accessed
+directly.
+
+The LKMM requires that smp_rmb(), acquire fences, and strong fences
+share this property: They do not allow the CPU to execute any po-later
+instructions (or po-later loads in the case of smp_rmb()) until all
+outstanding stores have been processed by the local cache.  In the
+case of a strong fence, the CPU first has to wait for all of its
+po-earlier stores to propagate to every other CPU in the system; then
+it has to wait for the local cache to process all the stores received
+as of that time -- not just the stores received when the strong fence
+began.
+
+And of course, none of this matters for any architecture other than
+Alpha.
+
+
+THE HAPPENS-BEFORE RELATION: hb
+-------------------------------
+
+The happens-before relation (hb) links memory accesses that have to
+execute in a certain order.  hb includes the ppo relation and two
+others, one of which is rfe.
+
+W ->rfe R implies that W and R are on different CPUs.  It also means
+that W's store must have propagated to R's CPU before R executed;
+otherwise R could not have read the value stored by W.  Therefore W
+must have executed before R, and so we have W ->hb R.
+
+The equivalent fact need not hold if W ->rfi R (i.e., W and R are on
+the same CPU).  As we have already seen, the operational model allows
+W's value to be forwarded to R in such cases, meaning that R may well
+execute before W does.
+
+It's important to understand that neither coe nor fre is included in
+hb, despite their similarities to rfe.  For example, suppose we have
+W ->coe W'.  This means that W and W' are stores to the same location,
+they execute on different CPUs, and W comes before W' in the coherence
+order (i.e., W' overwrites W).  Nevertheless, it is possible for W' to
+execute before W, because the decision as to which store overwrites
+the other is made later by the memory subsystem.  When the stores are
+nearly simultaneous, either one can come out on top.  Similarly,
+R ->fre W means that W overwrites the value which R reads, but it
+doesn't mean that W has to execute after R.  All that's necessary is
+for the memory subsystem not to propagate W to R's CPU until after R
+has executed, which is possible if W executes shortly before R.
+
+The third relation included in hb is like ppo, in that it only links
+events that are on the same CPU.  However it is more difficult to
+explain, because it arises only indirectly from the requirement of
+cache coherence.  The relation is called prop, and it links two events
+on CPU C in situations where a store from some other CPU comes after
+the first event in the coherence order and propagates to C before the
+second event executes.
+
+This is best explained with some examples.  The simplest case looks
+like this:
+
+	int x;
+
+	P0()
+	{
+		int r1;
+
+		WRITE_ONCE(x, 1);
+		r1 = READ_ONCE(x);
+	}
+
+	P1()
+	{
+		WRITE_ONCE(x, 8);
+	}
+
+If r1 = 8 at the end then P0's accesses must have executed in program
+order.  We can deduce this from the operational model; if P0's load
+had executed before its store then the value of the store would have
+been forwarded to the load, so r1 would have ended up equal to 1, not
+8.  In this case there is a prop link from P0's write event to its read
+event, because P1's store came after P0's store in x's coherence
+order, and P1's store propagated to P0 before P0's load executed.
+
+An equally simple case involves two loads of the same location that
+read from different stores:
+
+	int x = 0;
+
+	P0()
+	{
+		int r1, r2;
+
+		r1 = READ_ONCE(x);
+		r2 = READ_ONCE(x);
+	}
+
+	P1()
+	{
+		WRITE_ONCE(x, 9);
+	}
+
+If r1 = 0 and r2 = 9 at the end then P0's accesses must have executed
+in program order.  If the second load had executed before the first
+then the x = 9 store must have been propagated to P0 before the first
+load executed, and so r1 would have been 9 rather than 0.  In this
+case there is a prop link from P0's first read event to its second,
+because P1's store overwrote the value read by P0's first load, and
+P1's store propagated to P0 before P0's second load executed.
+
+Less trivial examples of prop all involve fences.  Unlike the simple
+examples above, they can require that some instructions are executed
+out of program order.  This next one should look familiar:
+
+	int buf = 0, flag = 0;
+
+	P0()
+	{
+		WRITE_ONCE(buf, 1);
+		smp_wmb();
+		WRITE_ONCE(flag, 1);
+	}
+
+	P1()
+	{
+		int r1;
+		int r2;
+
+		r1 = READ_ONCE(flag);
+		r2 = READ_ONCE(buf);
+	}
+
+This is the MP pattern again, with an smp_wmb() fence between the two
+stores.  If r1 = 1 and r2 = 0 at the end then there is a prop link
+from P1's second load to its first (backwards!).  The reason is
+similar to the previous examples: The value P1 loads from buf gets
+overwritten by P0's store to buf, the fence guarantees that the store
+to buf will propagate to P1 before the store to flag does, and the
+store to flag propagates to P1 before P1 reads flag.
+
+The prop link says that in order to obtain the r1 = 1, r2 = 0 result,
+P1 must execute its second load before the first.  Indeed, if the load
+from flag were executed first, then the buf = 1 store would already
+have propagated to P1 by the time P1's load from buf executed, so r2
+would have been 1 at the end, not 0.  (The reasoning holds even for
+Alpha, although the details are more complicated and we will not go
+into them.)
+
+But what if we put an smp_rmb() fence between P1's loads?  The fence
+would force the two loads to be executed in program order, and it
+would generate a cycle in the hb relation: The fence would create a ppo
+link (hence an hb link) from the first load to the second, and the
+prop relation would give an hb link from the second load to the first.
+Since an instruction can't execute before itself, we are forced to
+conclude that if an smp_rmb() fence is added, the r1 = 1, r2 = 0
+outcome is impossible -- as it should be.
+
+The formal definition of the prop relation involves a coe or fre link,
+followed by an arbitrary number of cumul-fence links, ending with an
+rfe link.  You can concoct more exotic examples, containing more than
+one fence, although this quickly leads to diminishing returns in terms
+of complexity.  For instance, here's an example containing a coe link
+followed by two cumul-fences and an rfe link, utilizing the fact that
+release fences are A-cumulative:
+
+	int x, y, z;
+
+	P0()
+	{
+		int r0;
+
+		WRITE_ONCE(x, 1);
+		r0 = READ_ONCE(z);
+	}
+
+	P1()
+	{
+		WRITE_ONCE(x, 2);
+		smp_wmb();
+		WRITE_ONCE(y, 1);
+	}
+
+	P2()
+	{
+		int r2;
+
+		r2 = READ_ONCE(y);
+		smp_store_release(&z, 1);
+	}
+
+If x = 2, r0 = 1, and r2 = 1 after this code runs then there is a prop
+link from P0's store to its load.  This is because P0's store gets
+overwritten by P1's store since x = 2 at the end (a coe link), the
+smp_wmb() ensures that P1's store to x propagates to P2 before the
+store to y does (the first cumul-fence), the store to y propagates to P2
+before P2's load and store execute, P2's smp_store_release()
+guarantees that the stores to x and y both propagate to P0 before the
+store to z does (the second cumul-fence), and P0's load executes after the
+store to z has propagated to P0 (an rfe link).
+
+In summary, the fact that the hb relation links memory access events
+in the order they execute means that it must not have cycles.  This
+requirement is the content of the LKMM's "happens-before" axiom.
+
+The LKMM defines yet another relation connected to times of
+instruction execution, but it is not included in hb.  It relies on the
+particular properties of strong fences, which we cover in the next
+section.
+
+
+THE PROPAGATES-BEFORE RELATION: pb
+----------------------------------
+
+The propagates-before (pb) relation capitalizes on the special
+features of strong fences.  It links two events E and F whenever some
+store is coherence-later than E and propagates to every CPU and to RAM
+before F executes.  The formal definition requires that E be linked to
+F via a coe or fre link, an arbitrary number of cumul-fences, an
+optional rfe link, a strong fence, and an arbitrary number of hb
+links.  Let's see how this definition works out.
+
+Consider first the case where E is a store (implying that the sequence
+of links begins with coe).  Then there are events W, X, Y, and Z such
+that:
+
+	E ->coe W ->cumul-fence* X ->rfe? Y ->strong-fence Z ->hb* F,
+
+where the * suffix indicates an arbitrary number of links of the
+specified type, and the ? suffix indicates the link is optional (Y may
+be equal to X).  Because of the cumul-fence links, we know that W will
+propagate to Y's CPU before X does, hence before Y executes and hence
+before the strong fence executes.  Because this fence is strong, we
+know that W will propagate to every CPU and to RAM before Z executes.
+And because of the hb links, we know that Z will execute before F.
+Thus W, which comes later than E in the coherence order, will
+propagate to every CPU and to RAM before F executes.
+
+The case where E is a load is exactly the same, except that the first
+link in the sequence is fre instead of coe.
+
+The existence of a pb link from E to F implies that E must execute
+before F.  To see why, suppose that F executed first.  Then W would
+have propagated to E's CPU before E executed.  If E was a store, the
+memory subsystem would then be forced to make E come after W in the
+coherence order, contradicting the fact that E ->coe W.  If E was a
+load, the memory subsystem would then be forced to satisfy E's read
+request with the value stored by W or an even later store,
+contradicting the fact that E ->fre W.
+
+A good example illustrating how pb works is the SB pattern with strong
+fences:
+
+	int x = 0, y = 0;
+
+	P0()
+	{
+		int r0;
+
+		WRITE_ONCE(x, 1);
+		smp_mb();
+		r0 = READ_ONCE(y);
+	}
+
+	P1()
+	{
+		int r1;
+
+		WRITE_ONCE(y, 1);
+		smp_mb();
+		r1 = READ_ONCE(x);
+	}
+
+If r0 = 0 at the end then there is a pb link from P0's load to P1's
+load: an fre link from P0's load to P1's store (which overwrites the
+value read by P0), and a strong fence between P1's store and its load.
+In this example, the sequences of cumul-fence and hb links are empty.
+Note that this pb link is not included in hb as an instance of prop,
+because it does not start and end on the same CPU.
+
+Similarly, if r1 = 0 at the end then there is a pb link from P1's load
+to P0's.  This means that if both r1 and r2 were 0 there would be a
+cycle in pb, which is not possible since an instruction cannot execute
+before itself.  Thus, adding smp_mb() fences to the SB pattern
+prevents the r0 = 0, r1 = 0 outcome.
+
+In summary, the fact that the pb relation links events in the order
+they execute means that it cannot have cycles.  This requirement is
+the content of the LKMM's "propagation" axiom.
+
+
+RCU RELATIONS: rcu-link, rcu-gp, rcu-rscsi, rcu-order, rcu-fence, and rb
+------------------------------------------------------------------------
+
+RCU (Read-Copy-Update) is a powerful synchronization mechanism.  It
+rests on two concepts: grace periods and read-side critical sections.
+
+A grace period is the span of time occupied by a call to
+synchronize_rcu().  A read-side critical section (or just critical
+section, for short) is a region of code delimited by rcu_read_lock()
+at the start and rcu_read_unlock() at the end.  Critical sections can
+be nested, although we won't make use of this fact.
+
+As far as memory models are concerned, RCU's main feature is its
+Grace-Period Guarantee, which states that a critical section can never
+span a full grace period.  In more detail, the Guarantee says:
+
+	For any critical section C and any grace period G, at least
+	one of the following statements must hold:
+
+(1)	C ends before G does, and in addition, every store that
+	propagates to C's CPU before the end of C must propagate to
+	every CPU before G ends.
+
+(2)	G starts before C does, and in addition, every store that
+	propagates to G's CPU before the start of G must propagate
+	to every CPU before C starts.
+
+In particular, it is not possible for a critical section to both start
+before and end after a grace period.
+
+Here is a simple example of RCU in action:
+
+	int x, y;
+
+	P0()
+	{
+		rcu_read_lock();
+		WRITE_ONCE(x, 1);
+		WRITE_ONCE(y, 1);
+		rcu_read_unlock();
+	}
+
+	P1()
+	{
+		int r1, r2;
+
+		r1 = READ_ONCE(x);
+		synchronize_rcu();
+		r2 = READ_ONCE(y);
+	}
+
+The Grace Period Guarantee tells us that when this code runs, it will
+never end with r1 = 1 and r2 = 0.  The reasoning is as follows.  r1 = 1
+means that P0's store to x propagated to P1 before P1 called
+synchronize_rcu(), so P0's critical section must have started before
+P1's grace period, contrary to part (2) of the Guarantee.  On the
+other hand, r2 = 0 means that P0's store to y, which occurs before the
+end of the critical section, did not propagate to P1 before the end of
+the grace period, contrary to part (1).  Together the results violate
+the Guarantee.
+
+In the kernel's implementations of RCU, the requirements for stores
+to propagate to every CPU are fulfilled by placing strong fences at
+suitable places in the RCU-related code.  Thus, if a critical section
+starts before a grace period does then the critical section's CPU will
+execute an smp_mb() fence after the end of the critical section and
+some time before the grace period's synchronize_rcu() call returns.
+And if a critical section ends after a grace period does then the
+synchronize_rcu() routine will execute an smp_mb() fence at its start
+and some time before the critical section's opening rcu_read_lock()
+executes.
+
+What exactly do we mean by saying that a critical section "starts
+before" or "ends after" a grace period?  Some aspects of the meaning
+are pretty obvious, as in the example above, but the details aren't
+entirely clear.  The LKMM formalizes this notion by means of the
+rcu-link relation.  rcu-link encompasses a very general notion of
+"before": If E and F are RCU fence events (i.e., rcu_read_lock(),
+rcu_read_unlock(), or synchronize_rcu()) then among other things,
+E ->rcu-link F includes cases where E is po-before some memory-access
+event X, F is po-after some memory-access event Y, and we have any of
+X ->rfe Y, X ->co Y, or X ->fr Y.
+
+The formal definition of the rcu-link relation is more than a little
+obscure, and we won't give it here.  It is closely related to the pb
+relation, and the details don't matter unless you want to comb through
+a somewhat lengthy formal proof.  Pretty much all you need to know
+about rcu-link is the information in the preceding paragraph.
+
+The LKMM also defines the rcu-gp and rcu-rscsi relations.  They bring
+grace periods and read-side critical sections into the picture, in the
+following way:
+
+	E ->rcu-gp F means that E and F are in fact the same event,
+	and that event is a synchronize_rcu() fence (i.e., a grace
+	period).
+
+	E ->rcu-rscsi F means that E and F are the rcu_read_unlock()
+	and rcu_read_lock() fence events delimiting some read-side
+	critical section.  (The 'i' at the end of the name emphasizes
+	that this relation is "inverted": It links the end of the
+	critical section to the start.)
+
+If we think of the rcu-link relation as standing for an extended
+"before", then X ->rcu-gp Y ->rcu-link Z roughly says that X is a
+grace period which ends before Z begins.  (In fact it covers more than
+this, because it also includes cases where some store propagates to
+Z's CPU before Z begins but doesn't propagate to some other CPU until
+after X ends.)  Similarly, X ->rcu-rscsi Y ->rcu-link Z says that X is
+the end of a critical section which starts before Z begins.
+
+The LKMM goes on to define the rcu-order relation as a sequence of
+rcu-gp and rcu-rscsi links separated by rcu-link links, in which the
+number of rcu-gp links is >= the number of rcu-rscsi links.  For
+example:
+
+	X ->rcu-gp Y ->rcu-link Z ->rcu-rscsi T ->rcu-link U ->rcu-gp V
+
+would imply that X ->rcu-order V, because this sequence contains two
+rcu-gp links and one rcu-rscsi link.  (It also implies that
+X ->rcu-order T and Z ->rcu-order V.)  On the other hand:
+
+	X ->rcu-rscsi Y ->rcu-link Z ->rcu-rscsi T ->rcu-link U ->rcu-gp V
+
+does not imply X ->rcu-order V, because the sequence contains only
+one rcu-gp link but two rcu-rscsi links.
+
+The rcu-order relation is important because the Grace Period Guarantee
+means that rcu-order links act kind of like strong fences.  In
+particular, E ->rcu-order F implies not only that E begins before F
+ends, but also that any write po-before E will propagate to every CPU
+before any instruction po-after F can execute.  (However, it does not
+imply that E must execute before F; in fact, each synchronize_rcu()
+fence event is linked to itself by rcu-order as a degenerate case.)
+
+To prove this in full generality requires some intellectual effort.
+We'll consider just a very simple case:
+
+	G ->rcu-gp W ->rcu-link Z ->rcu-rscsi F.
+
+This formula means that G and W are the same event (a grace period),
+and there are events X, Y and a read-side critical section C such that:
+
+	1. G = W is po-before or equal to X;
+
+	2. X comes "before" Y in some sense (including rfe, co and fr);
+
+	3. Y is po-before Z;
+
+	4. Z is the rcu_read_unlock() event marking the end of C;
+
+	5. F is the rcu_read_lock() event marking the start of C.
+
+From 1 - 4 we deduce that the grace period G ends before the critical
+section C.  Then part (2) of the Grace Period Guarantee says not only
+that G starts before C does, but also that any write which executes on
+G's CPU before G starts must propagate to every CPU before C starts.
+In particular, the write propagates to every CPU before F finishes
+executing and hence before any instruction po-after F can execute.
+This sort of reasoning can be extended to handle all the situations
+covered by rcu-order.
+
+The rcu-fence relation is a simple extension of rcu-order.  While
+rcu-order only links certain fence events (calls to synchronize_rcu(),
+rcu_read_lock(), or rcu_read_unlock()), rcu-fence links any events
+that are separated by an rcu-order link.  This is analogous to the way
+the strong-fence relation links events that are separated by an
+smp_mb() fence event (as mentioned above, rcu-order links act kind of
+like strong fences).  Written symbolically, X ->rcu-fence Y means
+there are fence events E and F such that:
+
+	X ->po E ->rcu-order F ->po Y.
+
+From the discussion above, we see this implies not only that X
+executes before Y, but also (if X is a store) that X propagates to
+every CPU before Y executes.  Thus rcu-fence is sort of a
+"super-strong" fence: Unlike the original strong fences (smp_mb() and
+synchronize_rcu()), rcu-fence is able to link events on different
+CPUs.  (Perhaps this fact should lead us to say that rcu-fence isn't
+really a fence at all!)
+
+Finally, the LKMM defines the RCU-before (rb) relation in terms of
+rcu-fence.  This is done in essentially the same way as the pb
+relation was defined in terms of strong-fence.  We will omit the
+details; the end result is that E ->rb F implies E must execute
+before F, just as E ->pb F does (and for much the same reasons).
+
+Putting this all together, the LKMM expresses the Grace Period
+Guarantee by requiring that the rb relation does not contain a cycle.
+Equivalently, this "rcu" axiom requires that there are no events E
+and F with E ->rcu-link F ->rcu-order E.  Or to put it a third way,
+the axiom requires that there are no cycles consisting of rcu-gp and
+rcu-rscsi alternating with rcu-link, where the number of rcu-gp links
+is >= the number of rcu-rscsi links.
+
+Justifying the axiom isn't easy, but it is in fact a valid
+formalization of the Grace Period Guarantee.  We won't attempt to go
+through the detailed argument, but the following analysis gives a
+taste of what is involved.  Suppose both parts of the Guarantee are
+violated: A critical section starts before a grace period, and some
+store propagates to the critical section's CPU before the end of the
+critical section but doesn't propagate to some other CPU until after
+the end of the grace period.
+
+Putting symbols to these ideas, let L and U be the rcu_read_lock() and
+rcu_read_unlock() fence events delimiting the critical section in
+question, and let S be the synchronize_rcu() fence event for the grace
+period.  Saying that the critical section starts before S means there
+are events Q and R where Q is po-after L (which marks the start of the
+critical section), Q is "before" R in the sense used by the rcu-link
+relation, and R is po-before the grace period S.  Thus we have:
+
+	L ->rcu-link S.
+
+Let W be the store mentioned above, let Y come before the end of the
+critical section and witness that W propagates to the critical
+section's CPU by reading from W, and let Z on some arbitrary CPU be a
+witness that W has not propagated to that CPU, where Z happens after
+some event X which is po-after S.  Symbolically, this amounts to:
+
+	S ->po X ->hb* Z ->fr W ->rf Y ->po U.
+
+The fr link from Z to W indicates that W has not propagated to Z's CPU
+at the time that Z executes.  From this, it can be shown (see the
+discussion of the rcu-link relation earlier) that S and U are related
+by rcu-link:
+
+	S ->rcu-link U.
+
+Since S is a grace period we have S ->rcu-gp S, and since L and U are
+the start and end of the critical section C we have U ->rcu-rscsi L.
+From this we obtain:
+
+	S ->rcu-gp S ->rcu-link U ->rcu-rscsi L ->rcu-link S,
+
+a forbidden cycle.  Thus the "rcu" axiom rules out this violation of
+the Grace Period Guarantee.
+
+For something a little more down-to-earth, let's see how the axiom
+works out in practice.  Consider the RCU code example from above, this
+time with statement labels added:
+
+	int x, y;
+
+	P0()
+	{
+		L: rcu_read_lock();
+		X: WRITE_ONCE(x, 1);
+		Y: WRITE_ONCE(y, 1);
+		U: rcu_read_unlock();
+	}
+
+	P1()
+	{
+		int r1, r2;
+
+		Z: r1 = READ_ONCE(x);
+		S: synchronize_rcu();
+		W: r2 = READ_ONCE(y);
+	}
+
+
+If r2 = 0 at the end then P0's store at Y overwrites the value that
+P1's load at W reads from, so we have W ->fre Y.  Since S ->po W and
+also Y ->po U, we get S ->rcu-link U.  In addition, S ->rcu-gp S
+because S is a grace period.
+
+If r1 = 1 at the end then P1's load at Z reads from P0's store at X,
+so we have X ->rfe Z.  Together with L ->po X and Z ->po S, this
+yields L ->rcu-link S.  And since L and U are the start and end of a
+critical section, we have U ->rcu-rscsi L.
+
+Then U ->rcu-rscsi L ->rcu-link S ->rcu-gp S ->rcu-link U is a
+forbidden cycle, violating the "rcu" axiom.  Hence the outcome is not
+allowed by the LKMM, as we would expect.
+
+For contrast, let's see what can happen in a more complicated example:
+
+	int x, y, z;
+
+	P0()
+	{
+		int r0;
+
+		L0: rcu_read_lock();
+		    r0 = READ_ONCE(x);
+		    WRITE_ONCE(y, 1);
+		U0: rcu_read_unlock();
+	}
+
+	P1()
+	{
+		int r1;
+
+		    r1 = READ_ONCE(y);
+		S1: synchronize_rcu();
+		    WRITE_ONCE(z, 1);
+	}
+
+	P2()
+	{
+		int r2;
+
+		L2: rcu_read_lock();
+		    r2 = READ_ONCE(z);
+		    WRITE_ONCE(x, 1);
+		U2: rcu_read_unlock();
+	}
+
+If r0 = r1 = r2 = 1 at the end, then similar reasoning to before shows
+that U0 ->rcu-rscsi L0 ->rcu-link S1 ->rcu-gp S1 ->rcu-link U2 ->rcu-rscsi
+L2 ->rcu-link U0.  However this cycle is not forbidden, because the
+sequence of relations contains fewer instances of rcu-gp (one) than of
+rcu-rscsi (two).  Consequently the outcome is allowed by the LKMM.
+The following instruction timing diagram shows how it might actually
+occur:
+
+P0			P1			P2
+--------------------	--------------------	--------------------
+rcu_read_lock()
+WRITE_ONCE(y, 1)
+			r1 = READ_ONCE(y)
+			synchronize_rcu() starts
+			.			rcu_read_lock()
+			.			WRITE_ONCE(x, 1)
+r0 = READ_ONCE(x)	.
+rcu_read_unlock()	.
+			synchronize_rcu() ends
+			WRITE_ONCE(z, 1)
+						r2 = READ_ONCE(z)
+						rcu_read_unlock()
+
+This requires P0 and P2 to execute their loads and stores out of
+program order, but of course they are allowed to do so.  And as you
+can see, the Grace Period Guarantee is not violated: The critical
+section in P0 both starts before P1's grace period does and ends
+before it does, and the critical section in P2 both starts after P1's
+grace period does and ends after it does.
+
+Addendum: The LKMM now supports SRCU (Sleepable Read-Copy-Update) in
+addition to normal RCU.  The ideas involved are much the same as
+above, with new relations srcu-gp and srcu-rscsi added to represent
+SRCU grace periods and read-side critical sections.  There is a
+restriction on the srcu-gp and srcu-rscsi links that can appear in an
+rcu-order sequence (the srcu-rscsi links must be paired with srcu-gp
+links having the same SRCU domain with proper nesting); the details
+are relatively unimportant.
+
+
+LOCKING
+-------
+
+The LKMM includes locking.  In fact, there is special code for locking
+in the formal model, added in order to make tools run faster.
+However, this special code is intended to be more or less equivalent
+to concepts we have already covered.  A spinlock_t variable is treated
+the same as an int, and spin_lock(&s) is treated almost the same as:
+
+	while (cmpxchg_acquire(&s, 0, 1) != 0)
+		cpu_relax();
+
+This waits until s is equal to 0 and then atomically sets it to 1,
+and the read part of the cmpxchg operation acts as an acquire fence.
+An alternate way to express the same thing would be:
+
+	r = xchg_acquire(&s, 1);
+
+along with a requirement that at the end, r = 0.  Similarly,
+spin_trylock(&s) is treated almost the same as:
+
+	return !cmpxchg_acquire(&s, 0, 1);
+
+which atomically sets s to 1 if it is currently equal to 0 and returns
+true if it succeeds (the read part of the cmpxchg operation acts as an
+acquire fence only if the operation is successful).  spin_unlock(&s)
+is treated almost the same as:
+
+	smp_store_release(&s, 0);
+
+The "almost" qualifiers above need some explanation.  In the LKMM, the
+store-release in a spin_unlock() and the load-acquire which forms the
+first half of the atomic rmw update in a spin_lock() or a successful
+spin_trylock() -- we can call these things lock-releases and
+lock-acquires -- have two properties beyond those of ordinary releases
+and acquires.
+
+First, when a lock-acquire reads from or is po-after a lock-release,
+the LKMM requires that every instruction po-before the lock-release
+must execute before any instruction po-after the lock-acquire.  This
+would naturally hold if the release and acquire operations were on
+different CPUs and accessed the same lock variable, but the LKMM says
+it also holds when they are on the same CPU, even if they access
+different lock variables.  For example:
+
+	int x, y;
+	spinlock_t s, t;
+
+	P0()
+	{
+		int r1, r2;
+
+		spin_lock(&s);
+		r1 = READ_ONCE(x);
+		spin_unlock(&s);
+		spin_lock(&t);
+		r2 = READ_ONCE(y);
+		spin_unlock(&t);
+	}
+
+	P1()
+	{
+		WRITE_ONCE(y, 1);
+		smp_wmb();
+		WRITE_ONCE(x, 1);
+	}
+
+Here the second spin_lock() is po-after the first spin_unlock(), and
+therefore the load of x must execute before the load of y, even though
+the two locking operations use different locks.  Thus we cannot have
+r1 = 1 and r2 = 0 at the end (this is an instance of the MP pattern).
+
+This requirement does not apply to ordinary release and acquire
+fences, only to lock-related operations.  For instance, suppose P0()
+in the example had been written as:
+
+	P0()
+	{
+		int r1, r2, r3;
+
+		r1 = READ_ONCE(x);
+		smp_store_release(&s, 1);
+		r3 = smp_load_acquire(&s);
+		r2 = READ_ONCE(y);
+	}
+
+Then the CPU would be allowed to forward the s = 1 value from the
+smp_store_release() to the smp_load_acquire(), executing the
+instructions in the following order:
+
+		r3 = smp_load_acquire(&s);	// Obtains r3 = 1
+		r2 = READ_ONCE(y);
+		r1 = READ_ONCE(x);
+		smp_store_release(&s, 1);	// Value is forwarded
+
+and thus it could load y before x, obtaining r2 = 0 and r1 = 1.
+
+Second, when a lock-acquire reads from or is po-after a lock-release,
+and some other stores W and W' occur po-before the lock-release and
+po-after the lock-acquire respectively, the LKMM requires that W must
+propagate to each CPU before W' does.  For example, consider:
+
+	int x, y;
+	spinlock_t s;
+
+	P0()
+	{
+		spin_lock(&s);
+		WRITE_ONCE(x, 1);
+		spin_unlock(&s);
+	}
+
+	P1()
+	{
+		int r1;
+
+		spin_lock(&s);
+		r1 = READ_ONCE(x);
+		WRITE_ONCE(y, 1);
+		spin_unlock(&s);
+	}
+
+	P2()
+	{
+		int r2, r3;
+
+		r2 = READ_ONCE(y);
+		smp_rmb();
+		r3 = READ_ONCE(x);
+	}
+
+If r1 = 1 at the end then the spin_lock() in P1 must have read from
+the spin_unlock() in P0.  Hence the store to x must propagate to P2
+before the store to y does, so we cannot have r2 = 1 and r3 = 0.  But
+if P1 had used a lock variable different from s, the writes could have
+propagated in either order.  (On the other hand, if the code in P0 and
+P1 had all executed on a single CPU, as in the example before this
+one, then the writes would have propagated in order even if the two
+critical sections used different lock variables.)
+
+These two special requirements for lock-release and lock-acquire do
+not arise from the operational model.  Nevertheless, kernel developers
+have come to expect and rely on them because they do hold on all
+architectures supported by the Linux kernel, albeit for various
+differing reasons.
+
+
+PLAIN ACCESSES AND DATA RACES
+-----------------------------
+
+In the LKMM, memory accesses such as READ_ONCE(x), atomic_inc(&y),
+smp_load_acquire(&z), and so on are collectively referred to as
+"marked" accesses, because they are all annotated with special
+operations of one kind or another.  Ordinary C-language memory
+accesses such as x or y = 0 are simply called "plain" accesses.
+
+Early versions of the LKMM had nothing to say about plain accesses.
+The C standard allows compilers to assume that the variables affected
+by plain accesses are not concurrently read or written by any other
+threads or CPUs.  This leaves compilers free to implement all manner
+of transformations or optimizations of code containing plain accesses,
+making such code very difficult for a memory model to handle.
+
+Here is just one example of a possible pitfall:
+
+	int a = 6;
+	int *x = &a;
+
+	P0()
+	{
+		int *r1;
+		int r2 = 0;
+
+		r1 = x;
+		if (r1 != NULL)
+			r2 = READ_ONCE(*r1);
+	}
+
+	P1()
+	{
+		WRITE_ONCE(x, NULL);
+	}
+
+On the face of it, one would expect that when this code runs, the only
+possible final values for r2 are 6 and 0, depending on whether or not
+P1's store to x propagates to P0 before P0's load from x executes.
+But since P0's load from x is a plain access, the compiler may decide
+to carry out the load twice (for the comparison against NULL, then again
+for the READ_ONCE()) and eliminate the temporary variable r1.  The
+object code generated for P0 could therefore end up looking rather
+like this:
+
+	P0()
+	{
+		int r2 = 0;
+
+		if (x != NULL)
+			r2 = READ_ONCE(*x);
+	}
+
+And now it is obvious that this code runs the risk of dereferencing a
+NULL pointer, because P1's store to x might propagate to P0 after the
+test against NULL has been made but before the READ_ONCE() executes.
+If the original code had said "r1 = READ_ONCE(x)" instead of "r1 = x",
+the compiler would not have performed this optimization and there
+would be no possibility of a NULL-pointer dereference.
+
+Given the possibility of transformations like this one, the LKMM
+doesn't try to predict all possible outcomes of code containing plain
+accesses.  It is instead content to determine whether the code
+violates the compiler's assumptions, which would render the ultimate
+outcome undefined.
+
+In technical terms, the compiler is allowed to assume that when the
+program executes, there will not be any data races.  A "data race"
+occurs when there are two memory accesses such that:
+
+1.	they access the same location,
+
+2.	at least one of them is a store,
+
+3.	at least one of them is plain,
+
+4.	they occur on different CPUs (or in different threads on the
+	same CPU), and
+
+5.	they execute concurrently.
+
+In the literature, two accesses are said to "conflict" if they satisfy
+1 and 2 above.  We'll go a little farther and say that two accesses
+are "race candidates" if they satisfy 1 - 4.  Thus, whether or not two
+race candidates actually do race in a given execution depends on
+whether they are concurrent.
+
+The LKMM tries to determine whether a program contains race candidates
+which may execute concurrently; if it does then the LKMM says there is
+a potential data race and makes no predictions about the program's
+outcome.
+
+Determining whether two accesses are race candidates is easy; you can
+see that all the concepts involved in the definition above are already
+part of the memory model.  The hard part is telling whether they may
+execute concurrently.  The LKMM takes a conservative attitude,
+assuming that accesses may be concurrent unless it can prove they
+are not.
+
+If two memory accesses aren't concurrent then one must execute before
+the other.  Therefore the LKMM decides two accesses aren't concurrent
+if they can be connected by a sequence of hb, pb, and rb links
+(together referred to as xb, for "executes before").  However, there
+are two complicating factors.
+
+If X is a load and X executes before a store Y, then indeed there is
+no danger of X and Y being concurrent.  After all, Y can't have any
+effect on the value obtained by X until the memory subsystem has
+propagated Y from its own CPU to X's CPU, which won't happen until
+some time after Y executes and thus after X executes.  But if X is a
+store, then even if X executes before Y it is still possible that X
+will propagate to Y's CPU just as Y is executing.  In such a case X
+could very well interfere somehow with Y, and we would have to
+consider X and Y to be concurrent.
+
+Therefore when X is a store, for X and Y to be non-concurrent the LKMM
+requires not only that X must execute before Y but also that X must
+propagate to Y's CPU before Y executes.  (Or vice versa, of course, if
+Y executes before X -- then Y must propagate to X's CPU before X
+executes if Y is a store.)  This is expressed by the visibility
+relation (vis), where X ->vis Y is defined to hold if there is an
+intermediate event Z such that:
+
+	X is connected to Z by a possibly empty sequence of
+	cumul-fence links followed by an optional rfe link (if none of
+	these links are present, X and Z are the same event),
+
+and either:
+
+	Z is connected to Y by a strong-fence link followed by a
+	possibly empty sequence of xb links,
+
+or:
+
+	Z is on the same CPU as Y and is connected to Y by a possibly
+	empty sequence of xb links (again, if the sequence is empty it
+	means Z and Y are the same event).
+
+The motivations behind this definition are straightforward:
+
+	cumul-fence memory barriers force stores that are po-before
+	the barrier to propagate to other CPUs before stores that are
+	po-after the barrier.
+
+	An rfe link from an event W to an event R says that R reads
+	from W, which certainly means that W must have propagated to
+	R's CPU before R executed.
+
+	strong-fence memory barriers force stores that are po-before
+	the barrier, or that propagate to the barrier's CPU before the
+	barrier executes, to propagate to all CPUs before any events
+	po-after the barrier can execute.
+
+To see how this works out in practice, consider our old friend, the MP
+pattern (with fences and statement labels, but without the conditional
+test):
+
+	int buf = 0, flag = 0;
+
+	P0()
+	{
+		X: WRITE_ONCE(buf, 1);
+		   smp_wmb();
+		W: WRITE_ONCE(flag, 1);
+	}
+
+	P1()
+	{
+		int r1;
+		int r2 = 0;
+
+		Z: r1 = READ_ONCE(flag);
+		   smp_rmb();
+		Y: r2 = READ_ONCE(buf);
+	}
+
+The smp_wmb() memory barrier gives a cumul-fence link from X to W, and
+assuming r1 = 1 at the end, there is an rfe link from W to Z.  This
+means that the store to buf must propagate from P0 to P1 before Z
+executes.  Next, Z and Y are on the same CPU and the smp_rmb() fence
+provides an xb link from Z to Y (i.e., it forces Z to execute before
+Y).  Therefore we have X ->vis Y: X must propagate to Y's CPU before Y
+executes.
+
+The second complicating factor mentioned above arises from the fact
+that when we are considering data races, some of the memory accesses
+are plain.  Now, although we have not said so explicitly, up to this
+point most of the relations defined by the LKMM (ppo, hb, prop,
+cumul-fence, pb, and so on -- including vis) apply only to marked
+accesses.
+
+There are good reasons for this restriction.  The compiler is not
+allowed to apply fancy transformations to marked accesses, and
+consequently each such access in the source code corresponds more or
+less directly to a single machine instruction in the object code.  But
+plain accesses are a different story; the compiler may combine them,
+split them up, duplicate them, eliminate them, invent new ones, and
+who knows what else.  Seeing a plain access in the source code tells
+you almost nothing about what machine instructions will end up in the
+object code.
+
+Fortunately, the compiler isn't completely free; it is subject to some
+limitations.  For one, it is not allowed to introduce a data race into
+the object code if the source code does not already contain a data
+race (if it could, memory models would be useless and no multithreaded
+code would be safe!).  For another, it cannot move a plain access past
+a compiler barrier.
+
+A compiler barrier is a kind of fence, but as the name implies, it
+only affects the compiler; it does not necessarily have any effect on
+how instructions are executed by the CPU.  In Linux kernel source
+code, the barrier() function is a compiler barrier.  It doesn't give
+rise directly to any machine instructions in the object code; rather,
+it affects how the compiler generates the rest of the object code.
+Given source code like this:
+
+	... some memory accesses ...
+	barrier();
+	... some other memory accesses ...
+
+the barrier() function ensures that the machine instructions
+corresponding to the first group of accesses will all end po-before
+any machine instructions corresponding to the second group of accesses
+-- even if some of the accesses are plain.  (Of course, the CPU may
+then execute some of those accesses out of program order, but we
+already know how to deal with such issues.)  Without the barrier()
+there would be no such guarantee; the two groups of accesses could be
+intermingled or even reversed in the object code.
+
+The LKMM doesn't say much about the barrier() function, but it does
+require that all fences are also compiler barriers.  In addition, it
+requires that the ordering properties of memory barriers such as
+smp_rmb() or smp_store_release() apply to plain accesses as well as to
+marked accesses.
+
+This is the key to analyzing data races.  Consider the MP pattern
+again, now using plain accesses for buf:
+
+	int buf = 0, flag = 0;
+
+	P0()
+	{
+		U: buf = 1;
+		   smp_wmb();
+		X: WRITE_ONCE(flag, 1);
+	}
+
+	P1()
+	{
+		int r1;
+		int r2 = 0;
+
+		Y: r1 = READ_ONCE(flag);
+		   if (r1) {
+			   smp_rmb();
+			V: r2 = buf;
+		   }
+	}
+
+This program does not contain a data race.  Although the U and V
+accesses are race candidates, the LKMM can prove they are not
+concurrent as follows:
+
+	The smp_wmb() fence in P0 is both a compiler barrier and a
+	cumul-fence.  It guarantees that no matter what hash of
+	machine instructions the compiler generates for the plain
+	access U, all those instructions will be po-before the fence.
+	Consequently U's store to buf, no matter how it is carried out
+	at the machine level, must propagate to P1 before X's store to
+	flag does.
+
+	X and Y are both marked accesses.  Hence an rfe link from X to
+	Y is a valid indicator that X propagated to P1 before Y
+	executed, i.e., X ->vis Y.  (And if there is no rfe link then
+	r1 will be 0, so V will not be executed and ipso facto won't
+	race with U.)
+
+	The smp_rmb() fence in P1 is a compiler barrier as well as a
+	fence.  It guarantees that all the machine-level instructions
+	corresponding to the access V will be po-after the fence, and
+	therefore any loads among those instructions will execute
+	after the fence does and hence after Y does.
+
+Thus U's store to buf is forced to propagate to P1 before V's load
+executes (assuming V does execute), ruling out the possibility of a
+data race between them.
+
+This analysis illustrates how the LKMM deals with plain accesses in
+general.  Suppose R is a plain load and we want to show that R
+executes before some marked access E.  We can do this by finding a
+marked access X such that R and X are ordered by a suitable fence and
+X ->xb* E.  If E was also a plain access, we would also look for a
+marked access Y such that X ->xb* Y, and Y and E are ordered by a
+fence.  We describe this arrangement by saying that R is
+"post-bounded" by X and E is "pre-bounded" by Y.
+
+In fact, we go one step further: Since R is a read, we say that R is
+"r-post-bounded" by X.  Similarly, E would be "r-pre-bounded" or
+"w-pre-bounded" by Y, depending on whether E was a store or a load.
+This distinction is needed because some fences affect only loads
+(i.e., smp_rmb()) and some affect only stores (smp_wmb()); otherwise
+the two types of bounds are the same.  And as a degenerate case, we
+say that a marked access pre-bounds and post-bounds itself (e.g., if R
+above were a marked load then X could simply be taken to be R itself.)
+
+The need to distinguish between r- and w-bounding raises yet another
+issue.  When the source code contains a plain store, the compiler is
+allowed to put plain loads of the same location into the object code.
+For example, given the source code:
+
+	x = 1;
+
+the compiler is theoretically allowed to generate object code that
+looks like:
+
+	if (x != 1)
+		x = 1;
+
+thereby adding a load (and possibly replacing the store entirely).
+For this reason, whenever the LKMM requires a plain store to be
+w-pre-bounded or w-post-bounded by a marked access, it also requires
+the store to be r-pre-bounded or r-post-bounded, so as to handle cases
+where the compiler adds a load.
+
+(This may be overly cautious.  We don't know of any examples where a
+compiler has augmented a store with a load in this fashion, and the
+Linux kernel developers would probably fight pretty hard to change a
+compiler if it ever did this.  Still, better safe than sorry.)
+
+Incidentally, the other tranformation -- augmenting a plain load by
+adding in a store to the same location -- is not allowed.  This is
+because the compiler cannot know whether any other CPUs might perform
+a concurrent load from that location.  Two concurrent loads don't
+constitute a race (they can't interfere with each other), but a store
+does race with a concurrent load.  Thus adding a store might create a
+data race where one was not already present in the source code,
+something the compiler is forbidden to do.  Augmenting a store with a
+load, on the other hand, is acceptable because doing so won't create a
+data race unless one already existed.
+
+The LKMM includes a second way to pre-bound plain accesses, in
+addition to fences: an address dependency from a marked load.  That
+is, in the sequence:
+
+	p = READ_ONCE(ptr);
+	r = *p;
+
+the LKMM says that the marked load of ptr pre-bounds the plain load of
+*p; the marked load must execute before any of the machine
+instructions corresponding to the plain load.  This is a reasonable
+stipulation, since after all, the CPU can't perform the load of *p
+until it knows what value p will hold.  Furthermore, without some
+assumption like this one, some usages typical of RCU would count as
+data races.  For example:
+
+	int a = 1, b;
+	int *ptr = &a;
+
+	P0()
+	{
+		b = 2;
+		rcu_assign_pointer(ptr, &b);
+	}
+
+	P1()
+	{
+		int *p;
+		int r;
+
+		rcu_read_lock();
+		p = rcu_dereference(ptr);
+		r = *p;
+		rcu_read_unlock();
+	}
+
+(In this example the rcu_read_lock() and rcu_read_unlock() calls don't
+really do anything, because there aren't any grace periods.  They are
+included merely for the sake of good form; typically P0 would call
+synchronize_rcu() somewhere after the rcu_assign_pointer().)
+
+rcu_assign_pointer() performs a store-release, so the plain store to b
+is definitely w-post-bounded before the store to ptr, and the two
+stores will propagate to P1 in that order.  However, rcu_dereference()
+is only equivalent to READ_ONCE().  While it is a marked access, it is
+not a fence or compiler barrier.  Hence the only guarantee we have
+that the load of ptr in P1 is r-pre-bounded before the load of *p
+(thus avoiding a race) is the assumption about address dependencies.
+
+This is a situation where the compiler can undermine the memory model,
+and a certain amount of care is required when programming constructs
+like this one.  In particular, comparisons between the pointer and
+other known addresses can cause trouble.  If you have something like:
+
+	p = rcu_dereference(ptr);
+	if (p == &x)
+		r = *p;
+
+then the compiler just might generate object code resembling:
+
+	p = rcu_dereference(ptr);
+	if (p == &x)
+		r = x;
+
+or even:
+
+	rtemp = x;
+	p = rcu_dereference(ptr);
+	if (p == &x)
+		r = rtemp;
+
+which would invalidate the memory model's assumption, since the CPU
+could now perform the load of x before the load of ptr (there might be
+a control dependency but no address dependency at the machine level).
+
+Finally, it turns out there is a situation in which a plain write does
+not need to be w-post-bounded: when it is separated from the other
+race-candidate access by a fence.  At first glance this may seem
+impossible.  After all, to be race candidates the two accesses must
+be on different CPUs, and fences don't link events on different CPUs.
+Well, normal fences don't -- but rcu-fence can!  Here's an example:
+
+	int x, y;
+
+	P0()
+	{
+		WRITE_ONCE(x, 1);
+		synchronize_rcu();
+		y = 3;
+	}
+
+	P1()
+	{
+		rcu_read_lock();
+		if (READ_ONCE(x) == 0)
+			y = 2;
+		rcu_read_unlock();
+	}
+
+Do the plain stores to y race?  Clearly not if P1 reads a non-zero
+value for x, so let's assume the READ_ONCE(x) does obtain 0.  This
+means that the read-side critical section in P1 must finish executing
+before the grace period in P0 does, because RCU's Grace-Period
+Guarantee says that otherwise P0's store to x would have propagated to
+P1 before the critical section started and so would have been visible
+to the READ_ONCE().  (Another way of putting it is that the fre link
+from the READ_ONCE() to the WRITE_ONCE() gives rise to an rcu-link
+between those two events.)
+
+This means there is an rcu-fence link from P1's "y = 2" store to P0's
+"y = 3" store, and consequently the first must propagate from P1 to P0
+before the second can execute.  Therefore the two stores cannot be
+concurrent and there is no race, even though P1's plain store to y
+isn't w-post-bounded by any marked accesses.
+
+Putting all this material together yields the following picture.  For
+race-candidate stores W and W', where W ->co W', the LKMM says the
+stores don't race if W can be linked to W' by a
+
+	w-post-bounded ; vis ; w-pre-bounded
+
+sequence.  If W is plain then they also have to be linked by an
+
+	r-post-bounded ; xb* ; w-pre-bounded
+
+sequence, and if W' is plain then they also have to be linked by a
+
+	w-post-bounded ; vis ; r-pre-bounded
+
+sequence.  For race-candidate load R and store W, the LKMM says the
+two accesses don't race if R can be linked to W by an
+
+	r-post-bounded ; xb* ; w-pre-bounded
+
+sequence or if W can be linked to R by a
+
+	w-post-bounded ; vis ; r-pre-bounded
+
+sequence.  For the cases involving a vis link, the LKMM also accepts
+sequences in which W is linked to W' or R by a
+
+	strong-fence ; xb* ; {w and/or r}-pre-bounded
+
+sequence with no post-bounding, and in every case the LKMM also allows
+the link simply to be a fence with no bounding at all.  If no sequence
+of the appropriate sort exists, the LKMM says that the accesses race.
+
+There is one more part of the LKMM related to plain accesses (although
+not to data races) we should discuss.  Recall that many relations such
+as hb are limited to marked accesses only.  As a result, the
+happens-before, propagates-before, and rcu axioms (which state that
+various relation must not contain a cycle) doesn't apply to plain
+accesses.  Nevertheless, we do want to rule out such cycles, because
+they don't make sense even for plain accesses.
+
+To this end, the LKMM imposes three extra restrictions, together
+called the "plain-coherence" axiom because of their resemblance to the
+rules used by the operational model to ensure cache coherence (that
+is, the rules governing the memory subsystem's choice of a store to
+satisfy a load request and its determination of where a store will
+fall in the coherence order):
+
+	If R and W are race candidates and it is possible to link R to
+	W by one of the xb* sequences listed above, then W ->rfe R is
+	not allowed (i.e., a load cannot read from a store that it
+	executes before, even if one or both is plain).
+
+	If W and R are race candidates and it is possible to link W to
+	R by one of the vis sequences listed above, then R ->fre W is
+	not allowed (i.e., if a store is visible to a load then the
+	load must read from that store or one coherence-after it).
+
+	If W and W' are race candidates and it is possible to link W
+	to W' by one of the vis sequences listed above, then W' ->co W
+	is not allowed (i.e., if one store is visible to a second then
+	the second must come after the first in the coherence order).
+
+This is the extent to which the LKMM deals with plain accesses.
+Perhaps it could say more (for example, plain accesses might
+contribute to the ppo relation), but at the moment it seems that this
+minimal, conservative approach is good enough.
+
+
+ODDS AND ENDS
+-------------
+
+This section covers material that didn't quite fit anywhere in the
+earlier sections.
+
+The descriptions in this document don't always match the formal
+version of the LKMM exactly.  For example, the actual formal
+definition of the prop relation makes the initial coe or fre part
+optional, and it doesn't require the events linked by the relation to
+be on the same CPU.  These differences are very unimportant; indeed,
+instances where the coe/fre part of prop is missing are of no interest
+because all the other parts (fences and rfe) are already included in
+hb anyway, and where the formal model adds prop into hb, it includes
+an explicit requirement that the events being linked are on the same
+CPU.
+
+Another minor difference has to do with events that are both memory
+accesses and fences, such as those corresponding to smp_load_acquire()
+calls.  In the formal model, these events aren't actually both reads
+and fences; rather, they are read events with an annotation marking
+them as acquires.  (Or write events annotated as releases, in the case
+smp_store_release().)  The final effect is the same.
+
+Although we didn't mention it above, the instruction execution
+ordering provided by the smp_rmb() fence doesn't apply to read events
+that are part of a non-value-returning atomic update.  For instance,
+given:
+
+	atomic_inc(&x);
+	smp_rmb();
+	r1 = READ_ONCE(y);
+
+it is not guaranteed that the load from y will execute after the
+update to x.  This is because the ARMv8 architecture allows
+non-value-returning atomic operations effectively to be executed off
+the CPU.  Basically, the CPU tells the memory subsystem to increment
+x, and then the increment is carried out by the memory hardware with
+no further involvement from the CPU.  Since the CPU doesn't ever read
+the value of x, there is nothing for the smp_rmb() fence to act on.
+
+The LKMM defines a few extra synchronization operations in terms of
+things we have already covered.  In particular, rcu_dereference() is
+treated as READ_ONCE() and rcu_assign_pointer() is treated as
+smp_store_release() -- which is basically how the Linux kernel treats
+them.
+
+Although we said that plain accesses are not linked by the ppo
+relation, they do contribute to it indirectly.  Namely, when there is
+an address dependency from a marked load R to a plain store W,
+followed by smp_wmb() and then a marked store W', the LKMM creates a
+ppo link from R to W'.  The reasoning behind this is perhaps a little
+shaky, but essentially it says there is no way to generate object code
+for this source code in which W' could execute before R.  Just as with
+pre-bounding by address dependencies, it is possible for the compiler
+to undermine this relation if sufficient care is not taken.
+
+There are a few oddball fences which need special treatment:
+smp_mb__before_atomic(), smp_mb__after_atomic(), and
+smp_mb__after_spinlock().  The LKMM uses fence events with special
+annotations for them; they act as strong fences just like smp_mb()
+except for the sets of events that they order.  Instead of ordering
+all po-earlier events against all po-later events, as smp_mb() does,
+they behave as follows:
+
+	smp_mb__before_atomic() orders all po-earlier events against
+	po-later atomic updates and the events following them;
+
+	smp_mb__after_atomic() orders po-earlier atomic updates and
+	the events preceding them against all po-later events;
+
+	smp_mb__after_spinlock() orders po-earlier lock acquisition
+	events and the events preceding them against all po-later
+	events.
+
+Interestingly, RCU and locking each introduce the possibility of
+deadlock.  When faced with code sequences such as:
+
+	spin_lock(&s);
+	spin_lock(&s);
+	spin_unlock(&s);
+	spin_unlock(&s);
+
+or:
+
+	rcu_read_lock();
+	synchronize_rcu();
+	rcu_read_unlock();
+
+what does the LKMM have to say?  Answer: It says there are no allowed
+executions at all, which makes sense.  But this can also lead to
+misleading results, because if a piece of code has multiple possible
+executions, some of which deadlock, the model will report only on the
+non-deadlocking executions.  For example:
+
+	int x, y;
+
+	P0()
+	{
+		int r0;
+
+		WRITE_ONCE(x, 1);
+		r0 = READ_ONCE(y);
+	}
+
+	P1()
+	{
+		rcu_read_lock();
+		if (READ_ONCE(x) > 0) {
+			WRITE_ONCE(y, 36);
+			synchronize_rcu();
+		}
+		rcu_read_unlock();
+	}
+
+Is it possible to end up with r0 = 36 at the end?  The LKMM will tell
+you it is not, but the model won't mention that this is because P1
+will self-deadlock in the executions where it stores 36 in y.
diff --git a/tools/memory-model/Documentation/glossary.txt b/tools/memory-model/Documentation/glossary.txt
new file mode 100644
index 000000000..6f3d16dbf
--- /dev/null
+++ b/tools/memory-model/Documentation/glossary.txt
@@ -0,0 +1,178 @@
+This document contains brief definitions of LKMM-related terms.  Like most
+glossaries, it is not intended to be read front to back (except perhaps
+as a way of confirming a diagnosis of OCD), but rather to be searched
+for specific terms.
+
+
+Address Dependency:  When the address of a later memory access is computed
+	based on the value returned by an earlier load, an "address
+	dependency" extends from that load extending to the later access.
+	Address dependencies are quite common in RCU read-side critical
+	sections:
+
+	 1 rcu_read_lock();
+	 2 p = rcu_dereference(gp);
+	 3 do_something(p->a);
+	 4 rcu_read_unlock();
+
+	 In this case, because the address of "p->a" on line 3 is computed
+	 from the value returned by the rcu_dereference() on line 2, the
+	 address dependency extends from that rcu_dereference() to that
+	 "p->a".  In rare cases, optimizing compilers can destroy address
+	 dependencies.	Please see Documentation/RCU/rcu_dereference.rst
+	 for more information.
+
+	 See also "Control Dependency" and "Data Dependency".
+
+Acquire:  With respect to a lock, acquiring that lock, for example,
+	using spin_lock().  With respect to a non-lock shared variable,
+	a special operation that includes a load and which orders that
+	load before later memory references running on that same CPU.
+	An example special acquire operation is smp_load_acquire(),
+	but atomic_read_acquire() and atomic_xchg_acquire() also include
+	acquire loads.
+
+	When an acquire load returns the value stored by a release store
+	to that same variable, (in other words, the acquire load "reads
+	from" the release store), then all operations preceding that
+	store "happen before" any operations following that load acquire.
+
+	See also "Happens-Before", "Reads-From", "Relaxed", and "Release".
+
+Coherence (co):  When one CPU's store to a given variable overwrites
+	either the value from another CPU's store or some later value,
+	there is said to be a coherence link from the second CPU to
+	the first.
+
+	It is also possible to have a coherence link within a CPU, which
+	is a "coherence internal" (coi) link.  The term "coherence
+	external" (coe) link is used when it is necessary to exclude
+	the coi case.
+
+	See also "From-reads" and "Reads-from".
+
+Control Dependency:  When a later store's execution depends on a test
+	of a value computed from a value returned by an earlier load,
+	a "control dependency" extends from that load to that store.
+	For example:
+
+	 1 if (READ_ONCE(x))
+	 2   WRITE_ONCE(y, 1);
+
+	 Here, the control dependency extends from the READ_ONCE() on
+	 line 1 to the WRITE_ONCE() on line 2.	Control dependencies are
+	 fragile, and can be easily destroyed by optimizing compilers.
+	 Please see control-dependencies.txt for more information.
+
+	 See also "Address Dependency" and "Data Dependency".
+
+Cycle:	Memory-barrier pairing is restricted to a pair of CPUs, as the
+	name suggests.	And in a great many cases, a pair of CPUs is all
+	that is required.  In other cases, the notion of pairing must be
+	extended to additional CPUs, and the result is called a "cycle".
+	In a cycle, each CPU's ordering interacts with that of the next:
+
+	CPU 0                CPU 1                CPU 2
+	WRITE_ONCE(x, 1);    WRITE_ONCE(y, 1);    WRITE_ONCE(z, 1);
+	smp_mb();            smp_mb();            smp_mb();
+	r0 = READ_ONCE(y);   r1 = READ_ONCE(z);   r2 = READ_ONCE(x);
+
+	CPU 0's smp_mb() interacts with that of CPU 1, which interacts
+	with that of CPU 2, which in turn interacts with that of CPU 0
+	to complete the cycle.	Because of the smp_mb() calls between
+	each pair of memory accesses, the outcome where r0, r1, and r2
+	are all equal to zero is forbidden by LKMM.
+
+	See also "Pairing".
+
+Data Dependency:  When the data written by a later store is computed based
+	on the value returned by an earlier load, a "data dependency"
+	extends from that load to that later store.  For example:
+
+	 1 r1 = READ_ONCE(x);
+	 2 WRITE_ONCE(y, r1 + 1);
+
+	In this case, the data dependency extends from the READ_ONCE()
+	on line 1 to the WRITE_ONCE() on line 2.  Data dependencies are
+	fragile and can be easily destroyed by optimizing compilers.
+	Because optimizing compilers put a great deal of effort into
+	working out what values integer variables might have, this is
+	especially true in cases where the dependency is carried through
+	an integer.
+
+	See also "Address Dependency" and "Control Dependency".
+
+From-Reads (fr):  When one CPU's store to a given variable happened
+	too late to affect the value returned by another CPU's
+	load from that same variable, there is said to be a from-reads
+	link from the load to the store.
+
+	It is also possible to have a from-reads link within a CPU, which
+	is a "from-reads internal" (fri) link.  The term "from-reads
+	external" (fre) link is used when it is necessary to exclude
+	the fri case.
+
+	See also "Coherence" and "Reads-from".
+
+Fully Ordered:  An operation such as smp_mb() that orders all of
+	its CPU's prior accesses with all of that CPU's subsequent
+	accesses, or a marked access such as atomic_add_return()
+	that orders all of its CPU's prior accesses, itself, and
+	all of its CPU's subsequent accesses.
+
+Happens-Before (hb): A relation between two accesses in which LKMM
+	guarantees the first access precedes the second.  For more
+	detail, please see the "THE HAPPENS-BEFORE RELATION: hb"
+	section of explanation.txt.
+
+Marked Access:  An access to a variable that uses an special function or
+	macro such as "r1 = READ_ONCE(x)" or "smp_store_release(&a, 1)".
+
+	See also "Unmarked Access".
+
+Pairing: "Memory-barrier pairing" reflects the fact that synchronizing
+	data between two CPUs requires that both CPUs their accesses.
+	Memory barriers thus tend to come in pairs, one executed by
+	one of the CPUs and the other by the other CPU.  Of course,
+	pairing also occurs with other types of operations, so that a
+	smp_store_release() pairs with an smp_load_acquire() that reads
+	the value stored.
+
+	See also "Cycle".
+
+Reads-From (rf):  When one CPU's load returns the value stored by some other
+	CPU, there is said to be a reads-from link from the second
+	CPU's store to the first CPU's load.  Reads-from links have the
+	nice property that time must advance from the store to the load,
+	which means that algorithms using reads-from links can use lighter
+	weight ordering and synchronization compared to algorithms using
+	coherence and from-reads links.
+
+	It is also possible to have a reads-from link within a CPU, which
+	is a "reads-from internal" (rfi) link.	The term "reads-from
+	external" (rfe) link is used when it is necessary to exclude
+	the rfi case.
+
+	See also Coherence" and "From-reads".
+
+Relaxed:  A marked access that does not imply ordering, for example, a
+	READ_ONCE(), WRITE_ONCE(), a non-value-returning read-modify-write
+	operation, or a value-returning read-modify-write operation whose
+	name ends in "_relaxed".
+
+	See also "Acquire" and "Release".
+
+Release:  With respect to a lock, releasing that lock, for example,
+	using spin_unlock().  With respect to a non-lock shared variable,
+	a special operation that includes a store and which orders that
+	store after earlier memory references that ran on that same CPU.
+	An example special release store is smp_store_release(), but
+	atomic_set_release() and atomic_cmpxchg_release() also include
+	release stores.
+
+	See also "Acquire" and "Relaxed".
+
+Unmarked Access:  An access to a variable that uses normal C-language
+	syntax, for example, "a = b[2]";
+
+	See also "Marked Access".
diff --git a/tools/memory-model/Documentation/litmus-tests.txt b/tools/memory-model/Documentation/litmus-tests.txt
new file mode 100644
index 000000000..26554b1c5
--- /dev/null
+++ b/tools/memory-model/Documentation/litmus-tests.txt
@@ -0,0 +1,1108 @@
+Linux-Kernel Memory Model Litmus Tests
+======================================
+
+This file describes the LKMM litmus-test format by example, describes
+some tricks and traps, and finally outlines LKMM's limitations.  Earlier
+versions of this material appeared in a number of LWN articles, including:
+
+https://lwn.net/Articles/720550/
+	A formal kernel memory-ordering model (part 2)
+https://lwn.net/Articles/608550/
+	Axiomatic validation of memory barriers and atomic instructions
+https://lwn.net/Articles/470681/
+	Validating Memory Barriers and Atomic Instructions
+
+This document presents information in decreasing order of applicability,
+so that, where possible, the information that has proven more commonly
+useful is shown near the beginning.
+
+For information on installing LKMM, including the underlying "herd7"
+tool, please see tools/memory-model/README.
+
+
+Copy-Pasta
+==========
+
+As with other software, it is often better (if less macho) to adapt an
+existing litmus test than it is to create one from scratch.  A number
+of litmus tests may be found in the kernel source tree:
+
+	tools/memory-model/litmus-tests/
+	Documentation/litmus-tests/
+
+Several thousand more example litmus tests are available on github
+and kernel.org:
+
+	https://github.com/paulmckrcu/litmus
+	https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/perfbook.git/tree/CodeSamples/formal/herd
+	https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/perfbook.git/tree/CodeSamples/formal/litmus
+
+The -l and -L arguments to "git grep" can be quite helpful in identifying
+existing litmus tests that are similar to the one you need.  But even if
+you start with an existing litmus test, it is still helpful to have a
+good understanding of the litmus-test format.
+
+
+Examples and Format
+===================
+
+This section describes the overall format of litmus tests, starting
+with a small example of the message-passing pattern and moving on to
+more complex examples that illustrate explicit initialization and LKMM's
+minimalistic set of flow-control statements.
+
+
+Message-Passing Example
+-----------------------
+
+This section gives an overview of the format of a litmus test using an
+example based on the common message-passing use case.  This use case
+appears often in the Linux kernel.  For example, a flag (modeled by "y"
+below) indicates that a buffer (modeled by "x" below) is now completely
+filled in and ready for use.  It would be very bad if the consumer saw the
+flag set, but, due to memory misordering, saw old values in the buffer.
+
+This example asks whether smp_store_release() and smp_load_acquire()
+suffices to avoid this bad outcome:
+
+ 1 C MP+pooncerelease+poacquireonce
+ 2
+ 3 {}
+ 4
+ 5 P0(int *x, int *y)
+ 6 {
+ 7   WRITE_ONCE(*x, 1);
+ 8   smp_store_release(y, 1);
+ 9 }
+10
+11 P1(int *x, int *y)
+12 {
+13   int r0;
+14   int r1;
+15
+16   r0 = smp_load_acquire(y);
+17   r1 = READ_ONCE(*x);
+18 }
+19
+20 exists (1:r0=1 /\ 1:r1=0)
+
+Line 1 starts with "C", which identifies this file as being in the
+LKMM C-language format (which, as we will see, is a small fragment
+of the full C language).  The remainder of line 1 is the name of
+the test, which by convention is the filename with the ".litmus"
+suffix stripped.  In this case, the actual test may be found in
+tools/memory-model/litmus-tests/MP+pooncerelease+poacquireonce.litmus
+in the Linux-kernel source tree.
+
+Mechanically generated litmus tests will often have an optional
+double-quoted comment string on the second line.  Such strings are ignored
+when running the test.  Yes, you can add your own comments to litmus
+tests, but this is a bit involved due to the use of multiple parsers.
+For now, you can use C-language comments in the C code, and these comments
+may be in either the "/* */" or the "//" style.  A later section will
+cover the full litmus-test commenting story.
+
+Line 3 is the initialization section.  Because the default initialization
+to zero suffices for this test, the "{}" syntax is used, which mean the
+initialization section is empty.  Litmus tests requiring non-default
+initialization must have non-empty initialization sections, as in the
+example that will be presented later in this document.
+
+Lines 5-9 show the first process and lines 11-18 the second process.  Each
+process corresponds to a Linux-kernel task (or kthread, workqueue, thread,
+and so on; LKMM discussions often use these terms interchangeably).
+The name of the first process is "P0" and that of the second "P1".
+You can name your processes anything you like as long as the names consist
+of a single "P" followed by a number, and as long as the numbers are
+consecutive starting with zero.  This can actually be quite helpful,
+for example, a .litmus file matching "^P1(" but not matching "^P2("
+must contain a two-process litmus test.
+
+The argument list for each function are pointers to the global variables
+used by that function.  Unlike normal C-language function parameters, the
+names are significant.  The fact that both P0() and P1() have a formal
+parameter named "x" means that these two processes are working with the
+same global variable, also named "x".  So the "int *x, int *y" on P0()
+and P1() mean that both processes are working with two shared global
+variables, "x" and "y".  Global variables are always passed to processes
+by reference, hence "P0(int *x, int *y)", but *never* "P0(int x, int y)".
+
+P0() has no local variables, but P1() has two of them named "r0" and "r1".
+These names may be freely chosen, but for historical reasons stemming from
+other litmus-test formats, it is conventional to use names consisting of
+"r" followed by a number as shown here.  A common bug in litmus tests
+is forgetting to add a global variable to a process's parameter list.
+This will sometimes result in an error message, but can also cause the
+intended global to instead be silently treated as an undeclared local
+variable.
+
+Each process's code is similar to Linux-kernel C, as can be seen on lines
+7-8 and 13-17.  This code may use many of the Linux kernel's atomic
+operations, some of its exclusive-lock functions, and some of its RCU
+and SRCU functions.  An approximate list of the currently supported
+functions may be found in the linux-kernel.def file.
+
+The P0() process does "WRITE_ONCE(*x, 1)" on line 7.  Because "x" is a
+pointer in P0()'s parameter list, this does an unordered store to global
+variable "x".  Line 8 does "smp_store_release(y, 1)", and because "y"
+is also in P0()'s parameter list, this does a release store to global
+variable "y".
+
+The P1() process declares two local variables on lines 13 and 14.
+Line 16 does "r0 = smp_load_acquire(y)" which does an acquire load
+from global variable "y" into local variable "r0".  Line 17 does a
+"r1 = READ_ONCE(*x)", which does an unordered load from "*x" into local
+variable "r1".  Both "x" and "y" are in P1()'s parameter list, so both
+reference the same global variables that are used by P0().
+
+Line 20 is the "exists" assertion expression to evaluate the final state.
+This final state is evaluated after the dust has settled: both processes
+have completed and all of their memory references and memory barriers
+have propagated to all parts of the system.  The references to the local
+variables "r0" and "r1" in line 24 must be prefixed with "1:" to specify
+which process they are local to.
+
+Note that the assertion expression is written in the litmus-test
+language rather than in C.  For example, single "=" is an equality
+operator rather than an assignment.  The "/\" character combination means
+"and".  Similarly, "\/" stands for "or".  Both of these are ASCII-art
+representations of the corresponding mathematical symbols.  Finally,
+"~" stands for "logical not", which is "!" in C, and not to be confused
+with the C-language "~" operator which instead stands for "bitwise not".
+Parentheses may be used to override precedence.
+
+The "exists" assertion on line 20 is satisfied if the consumer sees the
+flag ("y") set but the buffer ("x") as not yet filled in, that is, if P1()
+loaded a value from "x" that was equal to 1 but loaded a value from "y"
+that was still equal to zero.
+
+This example can be checked by running the following command, which
+absolutely must be run from the tools/memory-model directory and from
+this directory only:
+
+herd7 -conf linux-kernel.cfg litmus-tests/MP+pooncerelease+poacquireonce.litmus
+
+The output is the result of something similar to a full state-space
+search, and is as follows:
+
+ 1 Test MP+pooncerelease+poacquireonce Allowed
+ 2 States 3
+ 3 1:r0=0; 1:r1=0;
+ 4 1:r0=0; 1:r1=1;
+ 5 1:r0=1; 1:r1=1;
+ 6 No
+ 7 Witnesses
+ 8 Positive: 0 Negative: 3
+ 9 Condition exists (1:r0=1 /\ 1:r1=0)
+10 Observation MP+pooncerelease+poacquireonce Never 0 3
+11 Time MP+pooncerelease+poacquireonce 0.00
+12 Hash=579aaa14d8c35a39429b02e698241d09
+
+The most pertinent line is line 10, which contains "Never 0 3", which
+indicates that the bad result flagged by the "exists" clause never
+happens.  This line might instead say "Sometimes" to indicate that the
+bad result happened in some but not all executions, or it might say
+"Always" to indicate that the bad result happened in all executions.
+(The herd7 tool doesn't judge, so it is only an LKMM convention that the
+"exists" clause indicates a bad result.  To see this, invert the "exists"
+clause's condition and run the test.)  The numbers ("0 3") at the end
+of this line indicate the number of end states satisfying the "exists"
+clause (0) and the number not not satisfying that clause (3).
+
+Another important part of this output is shown in lines 2-5, repeated here:
+
+ 2 States 3
+ 3 1:r0=0; 1:r1=0;
+ 4 1:r0=0; 1:r1=1;
+ 5 1:r0=1; 1:r1=1;
+
+Line 2 gives the total number of end states, and each of lines 3-5 list
+one of these states, with the first ("1:r0=0; 1:r1=0;") indicating that
+both of P1()'s loads returned the value "0".  As expected, given the
+"Never" on line 10, the state flagged by the "exists" clause is not
+listed.  This full list of states can be helpful when debugging a new
+litmus test.
+
+The rest of the output is not normally needed, either due to irrelevance
+or due to being redundant with the lines discussed above.  However, the
+following paragraph lists them for the benefit of readers possessed of
+an insatiable curiosity.  Other readers should feel free to skip ahead.
+
+Line 1 echos the test name, along with the "Test" and "Allowed".  Line 6's
+"No" says that the "exists" clause was not satisfied by any execution,
+and as such it has the same meaning as line 10's "Never".  Line 7 is a
+lead-in to line 8's "Positive: 0 Negative: 3", which lists the number
+of end states satisfying and not satisfying the "exists" clause, just
+like the two numbers at the end of line 10.  Line 9 repeats the "exists"
+clause so that you don't have to look it up in the litmus-test file.
+The number at the end of line 11 (which begins with "Time") gives the
+time in seconds required to analyze the litmus test.  Small tests such
+as this one complete in a few milliseconds, so "0.00" is quite common.
+Line 12 gives a hash of the contents for the litmus-test file, and is used
+by tooling that manages litmus tests and their output.  This tooling is
+used by people modifying LKMM itself, and among other things lets such
+people know which of the several thousand relevant litmus tests were
+affected by a given change to LKMM.
+
+
+Initialization
+--------------
+
+The previous example relied on the default zero initialization for
+"x" and "y", but a similar litmus test could instead initialize them
+to some other value:
+
+ 1 C MP+pooncerelease+poacquireonce
+ 2
+ 3 {
+ 4   x=42;
+ 5   y=42;
+ 6 }
+ 7
+ 8 P0(int *x, int *y)
+ 9 {
+10   WRITE_ONCE(*x, 1);
+11   smp_store_release(y, 1);
+12 }
+13
+14 P1(int *x, int *y)
+15 {
+16   int r0;
+17   int r1;
+18
+19   r0 = smp_load_acquire(y);
+20   r1 = READ_ONCE(*x);
+21 }
+22
+23 exists (1:r0=1 /\ 1:r1=42)
+
+Lines 3-6 now initialize both "x" and "y" to the value 42.  This also
+means that the "exists" clause on line 23 must change "1:r1=0" to
+"1:r1=42".
+
+Running the test gives the same overall result as before, but with the
+value 42 appearing in place of the value zero:
+
+ 1 Test MP+pooncerelease+poacquireonce Allowed
+ 2 States 3
+ 3 1:r0=1; 1:r1=1;
+ 4 1:r0=42; 1:r1=1;
+ 5 1:r0=42; 1:r1=42;
+ 6 No
+ 7 Witnesses
+ 8 Positive: 0 Negative: 3
+ 9 Condition exists (1:r0=1 /\ 1:r1=42)
+10 Observation MP+pooncerelease+poacquireonce Never 0 3
+11 Time MP+pooncerelease+poacquireonce 0.02
+12 Hash=ab9a9b7940a75a792266be279a980156
+
+It is tempting to avoid the open-coded repetitions of the value "42"
+by defining another global variable "initval=42" and replacing all
+occurrences of "42" with "initval".  This will not, repeat *not*,
+initialize "x" and "y" to 42, but instead to the address of "initval"
+(try it!).  See the section below on linked lists to learn more about
+why this approach to initialization can be useful.
+
+
+Control Structures
+------------------
+
+LKMM supports the C-language "if" statement, which allows modeling of
+conditional branches.  In LKMM, conditional branches can affect ordering,
+but only if you are *very* careful (compilers are surprisingly able
+to optimize away conditional branches).  The following example shows
+the "load buffering" (LB) use case that is used in the Linux kernel to
+synchronize between ring-buffer producers and consumers.  In the example
+below, P0() is one side checking to see if an operation may proceed and
+P1() is the other side completing its update.
+
+ 1 C LB+fencembonceonce+ctrlonceonce
+ 2
+ 3 {}
+ 4
+ 5 P0(int *x, int *y)
+ 6 {
+ 7   int r0;
+ 8
+ 9   r0 = READ_ONCE(*x);
+10   if (r0)
+11     WRITE_ONCE(*y, 1);
+12 }
+13
+14 P1(int *x, int *y)
+15 {
+16   int r0;
+17
+18   r0 = READ_ONCE(*y);
+19   smp_mb();
+20   WRITE_ONCE(*x, 1);
+21 }
+22
+23 exists (0:r0=1 /\ 1:r0=1)
+
+P1()'s "if" statement on line 10 works as expected, so that line 11 is
+executed only if line 9 loads a non-zero value from "x".  Because P1()'s
+write of "1" to "x" happens only after P1()'s read from "y", one would
+hope that the "exists" clause cannot be satisfied.  LKMM agrees:
+
+ 1 Test LB+fencembonceonce+ctrlonceonce Allowed
+ 2 States 2
+ 3 0:r0=0; 1:r0=0;
+ 4 0:r0=1; 1:r0=0;
+ 5 No
+ 6 Witnesses
+ 7 Positive: 0 Negative: 2
+ 8 Condition exists (0:r0=1 /\ 1:r0=1)
+ 9 Observation LB+fencembonceonce+ctrlonceonce Never 0 2
+10 Time LB+fencembonceonce+ctrlonceonce 0.00
+11 Hash=e5260556f6de495fd39b556d1b831c3b
+
+However, there is no "while" statement due to the fact that full
+state-space search has some difficulty with iteration.  However, there
+are tricks that may be used to handle some special cases, which are
+discussed below.  In addition, loop-unrolling tricks may be applied,
+albeit sparingly.
+
+
+Tricks and Traps
+================
+
+This section covers extracting debug output from herd7, emulating
+spin loops, handling trivial linked lists, adding comments to litmus tests,
+emulating call_rcu(), and finally tricks to improve herd7 performance
+in order to better handle large litmus tests.
+
+
+Debug Output
+------------
+
+By default, the herd7 state output includes all variables mentioned
+in the "exists" clause.  But sometimes debugging efforts are greatly
+aided by the values of other variables.  Consider this litmus test
+(tools/memory-order/litmus-tests/SB+rfionceonce-poonceonces.litmus but
+slightly modified), which probes an obscure corner of hardware memory
+ordering:
+
+ 1 C SB+rfionceonce-poonceonces
+ 2
+ 3 {}
+ 4
+ 5 P0(int *x, int *y)
+ 6 {
+ 7   int r1;
+ 8   int r2;
+ 9
+10   WRITE_ONCE(*x, 1);
+11   r1 = READ_ONCE(*x);
+12   r2 = READ_ONCE(*y);
+13 }
+14
+15 P1(int *x, int *y)
+16 {
+17   int r3;
+18   int r4;
+19
+20   WRITE_ONCE(*y, 1);
+21   r3 = READ_ONCE(*y);
+22   r4 = READ_ONCE(*x);
+23 }
+24
+25 exists (0:r2=0 /\ 1:r4=0)
+
+The herd7 output is as follows:
+
+ 1 Test SB+rfionceonce-poonceonces Allowed
+ 2 States 4
+ 3 0:r2=0; 1:r4=0;
+ 4 0:r2=0; 1:r4=1;
+ 5 0:r2=1; 1:r4=0;
+ 6 0:r2=1; 1:r4=1;
+ 7 Ok
+ 8 Witnesses
+ 9 Positive: 1 Negative: 3
+10 Condition exists (0:r2=0 /\ 1:r4=0)
+11 Observation SB+rfionceonce-poonceonces Sometimes 1 3
+12 Time SB+rfionceonce-poonceonces 0.01
+13 Hash=c7f30fe0faebb7d565405d55b7318ada
+
+(This output indicates that CPUs are permitted to "snoop their own
+store buffers", which all of Linux's CPU families other than s390 will
+happily do.  Such snooping results in disagreement among CPUs on the
+order of stores from different CPUs, which is rarely an issue.)
+
+But the herd7 output shows only the two variables mentioned in the
+"exists" clause.  Someone modifying this test might wish to know the
+values of "x", "y", "0:r1", and "0:r3" as well.  The "locations"
+statement on line 25 shows how to cause herd7 to display additional
+variables:
+
+ 1 C SB+rfionceonce-poonceonces
+ 2
+ 3 {}
+ 4
+ 5 P0(int *x, int *y)
+ 6 {
+ 7   int r1;
+ 8   int r2;
+ 9
+10   WRITE_ONCE(*x, 1);
+11   r1 = READ_ONCE(*x);
+12   r2 = READ_ONCE(*y);
+13 }
+14
+15 P1(int *x, int *y)
+16 {
+17   int r3;
+18   int r4;
+19
+20   WRITE_ONCE(*y, 1);
+21   r3 = READ_ONCE(*y);
+22   r4 = READ_ONCE(*x);
+23 }
+24
+25 locations [0:r1; 1:r3; x; y]
+26 exists (0:r2=0 /\ 1:r4=0)
+
+The herd7 output then displays the values of all the variables:
+
+ 1 Test SB+rfionceonce-poonceonces Allowed
+ 2 States 4
+ 3 0:r1=1; 0:r2=0; 1:r3=1; 1:r4=0; x=1; y=1;
+ 4 0:r1=1; 0:r2=0; 1:r3=1; 1:r4=1; x=1; y=1;
+ 5 0:r1=1; 0:r2=1; 1:r3=1; 1:r4=0; x=1; y=1;
+ 6 0:r1=1; 0:r2=1; 1:r3=1; 1:r4=1; x=1; y=1;
+ 7 Ok
+ 8 Witnesses
+ 9 Positive: 1 Negative: 3
+10 Condition exists (0:r2=0 /\ 1:r4=0)
+11 Observation SB+rfionceonce-poonceonces Sometimes 1 3
+12 Time SB+rfionceonce-poonceonces 0.01
+13 Hash=40de8418c4b395388f6501cafd1ed38d
+
+What if you would like to know the value of a particular global variable
+at some particular point in a given process's execution?  One approach
+is to use a READ_ONCE() to load that global variable into a new local
+variable, then add that local variable to the "locations" clause.
+But be careful:  In some litmus tests, adding a READ_ONCE() will change
+the outcome!  For one example, please see the C-READ_ONCE.litmus and
+C-READ_ONCE-omitted.litmus tests located here:
+
+	https://github.com/paulmckrcu/litmus/blob/master/manual/kernel/
+
+
+Spin Loops
+----------
+
+The analysis carried out by herd7 explores full state space, which is
+at best of exponential time complexity.  Adding processes and increasing
+the amount of code in a give process can greatly increase execution time.
+Potentially infinite loops, such as those used to wait for locks to
+become available, are clearly problematic.
+
+Fortunately, it is possible to avoid state-space explosion by specially
+modeling such loops.  For example, the following litmus tests emulates
+locking using xchg_acquire(), but instead of enclosing xchg_acquire()
+in a spin loop, it instead excludes executions that fail to acquire the
+lock using a herd7 "filter" clause.  Note that for exclusive locking, you
+are better off using the spin_lock() and spin_unlock() that LKMM directly
+models, if for no other reason that these are much faster.  However, the
+techniques illustrated in this section can be used for other purposes,
+such as emulating reader-writer locking, which LKMM does not yet model.
+
+ 1 C C-SB+l-o-o-u+l-o-o-u-X
+ 2
+ 3 {
+ 4 }
+ 5
+ 6 P0(int *sl, int *x0, int *x1)
+ 7 {
+ 8   int r2;
+ 9   int r1;
+10
+11   r2 = xchg_acquire(sl, 1);
+12   WRITE_ONCE(*x0, 1);
+13   r1 = READ_ONCE(*x1);
+14   smp_store_release(sl, 0);
+15 }
+16
+17 P1(int *sl, int *x0, int *x1)
+18 {
+19   int r2;
+20   int r1;
+21
+22   r2 = xchg_acquire(sl, 1);
+23   WRITE_ONCE(*x1, 1);
+24   r1 = READ_ONCE(*x0);
+25   smp_store_release(sl, 0);
+26 }
+27
+28 filter (0:r2=0 /\ 1:r2=0)
+29 exists (0:r1=0 /\ 1:r1=0)
+
+This litmus test may be found here:
+
+https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/perfbook.git/tree/CodeSamples/formal/herd/C-SB+l-o-o-u+l-o-o-u-X.litmus
+
+This test uses two global variables, "x1" and "x2", and also emulates a
+single global spinlock named "sl".  This spinlock is held by whichever
+process changes the value of "sl" from "0" to "1", and is released when
+that process sets "sl" back to "0".  P0()'s lock acquisition is emulated
+on line 11 using xchg_acquire(), which unconditionally stores the value
+"1" to "sl" and stores either "0" or "1" to "r2", depending on whether
+the lock acquisition was successful or unsuccessful (due to "sl" already
+having the value "1"), respectively.  P1() operates in a similar manner.
+
+Rather unconventionally, execution appears to proceed to the critical
+section on lines 12 and 13 in either case.  Line 14 then uses an
+smp_store_release() to store zero to "sl", thus emulating lock release.
+
+The case where xchg_acquire() fails to acquire the lock is handled by
+the "filter" clause on line 28, which tells herd7 to keep only those
+executions in which both "0:r2" and "1:r2" are zero, that is to pay
+attention only to those executions in which both locks are actually
+acquired.  Thus, the bogus executions that would execute the critical
+sections are discarded and any effects that they might have had are
+ignored.  Note well that the "filter" clause keeps those executions
+for which its expression is satisfied, that is, for which the expression
+evaluates to true.  In other words, the "filter" clause says what to
+keep, not what to discard.
+
+The result of running this test is as follows:
+
+ 1 Test C-SB+l-o-o-u+l-o-o-u-X Allowed
+ 2 States 2
+ 3 0:r1=0; 1:r1=1;
+ 4 0:r1=1; 1:r1=0;
+ 5 No
+ 6 Witnesses
+ 7 Positive: 0 Negative: 2
+ 8 Condition exists (0:r1=0 /\ 1:r1=0)
+ 9 Observation C-SB+l-o-o-u+l-o-o-u-X Never 0 2
+10 Time C-SB+l-o-o-u+l-o-o-u-X 0.03
+
+The "Never" on line 9 indicates that this use of xchg_acquire() and
+smp_store_release() really does correctly emulate locking.
+
+Why doesn't the litmus test take the simpler approach of using a spin loop
+to handle failed spinlock acquisitions, like the kernel does?  The key
+insight behind this litmus test is that spin loops have no effect on the
+possible "exists"-clause outcomes of program execution in the absence
+of deadlock.  In other words, given a high-quality lock-acquisition
+primitive in a deadlock-free program running on high-quality hardware,
+each lock acquisition will eventually succeed.  Because herd7 already
+explores the full state space, the length of time required to actually
+acquire the lock does not matter.  After all, herd7 already models all
+possible durations of the xchg_acquire() statements.
+
+Why not just add the "filter" clause to the "exists" clause, thus
+avoiding the "filter" clause entirely?  This does work, but is slower.
+The reason that the "filter" clause is faster is that (in the common case)
+herd7 knows to abandon an execution as soon as the "filter" expression
+fails to be satisfied.  In contrast, the "exists" clause is evaluated
+only at the end of time, thus requiring herd7 to waste time on bogus
+executions in which both critical sections proceed concurrently.  In
+addition, some LKMM users like the separation of concerns provided by
+using the both the "filter" and "exists" clauses.
+
+Readers lacking a pathological interest in odd corner cases should feel
+free to skip the remainder of this section.
+
+But what if the litmus test were to temporarily set "0:r2" to a non-zero
+value?  Wouldn't that cause herd7 to abandon the execution prematurely
+due to an early mismatch of the "filter" clause?
+
+Why not just try it?  Line 4 of the following modified litmus test
+introduces a new global variable "x2" that is initialized to "1".  Line 23
+of P1() reads that variable into "1:r2" to force an early mismatch with
+the "filter" clause.  Line 24 does a known-true "if" condition to avoid
+and static analysis that herd7 might do.  Finally the "exists" clause
+on line 32 is updated to a condition that is alway satisfied at the end
+of the test.
+
+ 1 C C-SB+l-o-o-u+l-o-o-u-X
+ 2
+ 3 {
+ 4   x2=1;
+ 5 }
+ 6
+ 7 P0(int *sl, int *x0, int *x1)
+ 8 {
+ 9   int r2;
+10   int r1;
+11
+12   r2 = xchg_acquire(sl, 1);
+13   WRITE_ONCE(*x0, 1);
+14   r1 = READ_ONCE(*x1);
+15   smp_store_release(sl, 0);
+16 }
+17
+18 P1(int *sl, int *x0, int *x1, int *x2)
+19 {
+20   int r2;
+21   int r1;
+22
+23   r2 = READ_ONCE(*x2);
+24   if (r2)
+25     r2 = xchg_acquire(sl, 1);
+26   WRITE_ONCE(*x1, 1);
+27   r1 = READ_ONCE(*x0);
+28   smp_store_release(sl, 0);
+29 }
+30
+31 filter (0:r2=0 /\ 1:r2=0)
+32 exists (x1=1)
+
+If the "filter" clause were to check each variable at each point in the
+execution, running this litmus test would display no executions because
+all executions would be filtered out at line 23.  However, the output
+is instead as follows:
+
+ 1 Test C-SB+l-o-o-u+l-o-o-u-X Allowed
+ 2 States 1
+ 3 x1=1;
+ 4 Ok
+ 5 Witnesses
+ 6 Positive: 2 Negative: 0
+ 7 Condition exists (x1=1)
+ 8 Observation C-SB+l-o-o-u+l-o-o-u-X Always 2 0
+ 9 Time C-SB+l-o-o-u+l-o-o-u-X 0.04
+10 Hash=080bc508da7f291e122c6de76c0088e3
+
+Line 3 shows that there is one execution that did not get filtered out,
+so the "filter" clause is evaluated only on the last assignment to
+the variables that it checks.  In this case, the "filter" clause is a
+disjunction, so it might be evaluated twice, once at the final (and only)
+assignment to "0:r2" and once at the final assignment to "1:r2".
+
+
+Linked Lists
+------------
+
+LKMM can handle linked lists, but only linked lists in which each node
+contains nothing except a pointer to the next node in the list.  This is
+of course quite restrictive, but there is nevertheless quite a bit that
+can be done within these confines, as can be seen in the litmus test
+at tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus:
+
+ 1 C MP+onceassign+derefonce
+ 2
+ 3 {
+ 4 y=z;
+ 5 z=0;
+ 6 }
+ 7
+ 8 P0(int *x, int **y)
+ 9 {
+10   WRITE_ONCE(*x, 1);
+11   rcu_assign_pointer(*y, x);
+12 }
+13
+14 P1(int *x, int **y)
+15 {
+16   int *r0;
+17   int r1;
+18
+19   rcu_read_lock();
+20   r0 = rcu_dereference(*y);
+21   r1 = READ_ONCE(*r0);
+22   rcu_read_unlock();
+23 }
+24
+25 exists (1:r0=x /\ 1:r1=0)
+
+Line 4's "y=z" may seem odd, given that "z" has not yet been initialized.
+But "y=z" does not set the value of "y" to that of "z", but instead
+sets the value of "y" to the *address* of "z".  Lines 4 and 5 therefore
+create a simple linked list, with "y" pointing to "z" and "z" having a
+NULL pointer.  A much longer linked list could be created if desired,
+and circular singly linked lists can also be created and manipulated.
+
+The "exists" clause works the same way, with the "1:r0=x" comparing P1()'s
+"r0" not to the value of "x", but again to its address.  This term of the
+"exists" clause therefore tests whether line 20's load from "y" saw the
+value stored by line 11, which is in fact what is required in this case.
+
+P0()'s line 10 initializes "x" to the value 1 then line 11 links to "x"
+from "y", replacing "z".
+
+P1()'s line 20 loads a pointer from "y", and line 21 dereferences that
+pointer.  The RCU read-side critical section spanning lines 19-22 is just
+for show in this example.  Note that the address used for line 21's load
+depends on (in this case, "is exactly the same as") the value loaded by
+line 20.  This is an example of what is called an "address dependency".
+This particular address dependency extends from the load on line 20 to the
+load on line 21.  Address dependencies provide a weak form of ordering.
+
+Running this test results in the following:
+
+ 1 Test MP+onceassign+derefonce Allowed
+ 2 States 2
+ 3 1:r0=x; 1:r1=1;
+ 4 1:r0=z; 1:r1=0;
+ 5 No
+ 6 Witnesses
+ 7 Positive: 0 Negative: 2
+ 8 Condition exists (1:r0=x /\ 1:r1=0)
+ 9 Observation MP+onceassign+derefonce Never 0 2
+10 Time MP+onceassign+derefonce 0.00
+11 Hash=49ef7a741563570102448a256a0c8568
+
+The only possible outcomes feature P1() loading a pointer to "z"
+(which contains zero) on the one hand and P1() loading a pointer to "x"
+(which contains the value one) on the other.  This should be reassuring
+because it says that RCU readers cannot see the old preinitialization
+values when accessing a newly inserted list node.  This undesirable
+scenario is flagged by the "exists" clause, and would occur if P1()
+loaded a pointer to "x", but obtained the pre-initialization value of
+zero after dereferencing that pointer.
+
+
+Comments
+--------
+
+Different portions of a litmus test are processed by different parsers,
+which has the charming effect of requiring different comment syntax in
+different portions of the litmus test.  The C-syntax portions use
+C-language comments (either "/* */" or "//"), while the other portions
+use Ocaml comments "(* *)".
+
+The following litmus test illustrates the comment style corresponding
+to each syntactic unit of the test:
+
+ 1 C MP+onceassign+derefonce (* A *)
+ 2
+ 3 (* B *)
+ 4
+ 5 {
+ 6 y=z; (* C *)
+ 7 z=0;
+ 8 } // D
+ 9
+10 // E
+11
+12 P0(int *x, int **y) // F
+13 {
+14   WRITE_ONCE(*x, 1);  // G
+15   rcu_assign_pointer(*y, x);
+16 }
+17
+18 // H
+19
+20 P1(int *x, int **y)
+21 {
+22   int *r0;
+23   int r1;
+24
+25   rcu_read_lock();
+26   r0 = rcu_dereference(*y);
+27   r1 = READ_ONCE(*r0);
+28   rcu_read_unlock();
+29 }
+30
+31 // I
+32
+33 exists (* J *) (1:r0=x /\ (* K *) 1:r1=0) (* L *)
+
+In short, use C-language comments in the C code and Ocaml comments in
+the rest of the litmus test.
+
+On the other hand, if you prefer C-style comments everywhere, the
+C preprocessor is your friend.
+
+
+Asynchronous RCU Grace Periods
+------------------------------
+
+The following litmus test is derived from the example show in
+Documentation/litmus-tests/rcu/RCU+sync+free.litmus, but converted to
+emulate call_rcu():
+
+ 1 C RCU+sync+free
+ 2
+ 3 {
+ 4 int x = 1;
+ 5 int *y = &x;
+ 6 int z = 1;
+ 7 }
+ 8
+ 9 P0(int *x, int *z, int **y)
+10 {
+11   int *r0;
+12   int r1;
+13
+14   rcu_read_lock();
+15   r0 = rcu_dereference(*y);
+16   r1 = READ_ONCE(*r0);
+17   rcu_read_unlock();
+18 }
+19
+20 P1(int *z, int **y, int *c)
+21 {
+22   rcu_assign_pointer(*y, z);
+23   smp_store_release(*c, 1); // Emulate call_rcu().
+24 }
+25
+26 P2(int *x, int *z, int **y, int *c)
+27 {
+28   int r0;
+29
+30   r0 = smp_load_acquire(*c); // Note call_rcu() request.
+31   synchronize_rcu(); // Wait one grace period.
+32   WRITE_ONCE(*x, 0); // Emulate the RCU callback.
+33 }
+34
+35 filter (2:r0=1) (* Reject too-early starts. *)
+36 exists (0:r0=x /\ 0:r1=0)
+
+Lines 4-6 initialize a linked list headed by "y" that initially contains
+"x".  In addition, "z" is pre-initialized to prepare for P1(), which
+will replace "x" with "z" in this list.
+
+P0() on lines 9-18 enters an RCU read-side critical section, loads the
+list header "y" and dereferences it, leaving the node in "0:r0" and
+the node's value in "0:r1".
+
+P1() on lines 20-24 updates the list header to instead reference "z",
+then emulates call_rcu() by doing a release store into "c".
+
+P2() on lines 27-33 emulates the behind-the-scenes effect of doing a
+call_rcu().  Line 30 first does an acquire load from "c", then line 31
+waits for an RCU grace period to elapse, and finally line 32 emulates
+the RCU callback, which in turn emulates a call to kfree().
+
+Of course, it is possible for P2() to start too soon, so that the
+value of "2:r0" is zero rather than the required value of "1".
+The "filter" clause on line 35 handles this possibility, rejecting
+all executions in which "2:r0" is not equal to the value "1".
+
+
+Performance
+-----------
+
+LKMM's exploration of the full state-space can be extremely helpful,
+but it does not come for free.  The price is exponential computational
+complexity in terms of the number of processes, the average number
+of statements in each process, and the total number of stores in the
+litmus test.
+
+So it is best to start small and then work up.  Where possible, break
+your code down into small pieces each representing a core concurrency
+requirement.
+
+That said, herd7 is quite fast.  On an unprepossessing x86 laptop, it
+was able to analyze the following 10-process RCU litmus test in about
+six seconds.
+
+https://github.com/paulmckrcu/litmus/blob/master/auto/C-RW-R+RW-R+RW-G+RW-G+RW-G+RW-G+RW-R+RW-R+RW-R+RW-R.litmus
+
+One way to make herd7 run faster is to use the "-speedcheck true" option.
+This option prevents herd7 from generating all possible end states,
+instead causing it to focus solely on whether or not the "exists"
+clause can be satisfied.  With this option, herd7 evaluates the above
+litmus test in about 300 milliseconds, for more than an order of magnitude
+improvement in performance.
+
+Larger 16-process litmus tests that would normally consume 15 minutes
+of time complete in about 40 seconds with this option.  To be fair,
+you do get an extra 65,535 states when you leave off the "-speedcheck
+true" option.
+
+https://github.com/paulmckrcu/litmus/blob/master/auto/C-RW-R+RW-R+RW-G+RW-G+RW-G+RW-G+RW-R+RW-R+RW-R+RW-R+RW-G+RW-G+RW-G+RW-G+RW-R+RW-R.litmus
+
+Nevertheless, litmus-test analysis really is of exponential complexity,
+whether with or without "-speedcheck true".  Increasing by just three
+processes to a 19-process litmus test requires 2 hours and 40 minutes
+without, and about 8 minutes with "-speedcheck true".  Each of these
+results represent roughly an order of magnitude slowdown compared to the
+16-process litmus test.  Again, to be fair, the multi-hour run explores
+no fewer than 524,287 additional states compared to the shorter one.
+
+https://github.com/paulmckrcu/litmus/blob/master/auto/C-RW-R+RW-R+RW-G+RW-G+RW-G+RW-G+RW-R+RW-R+RW-R+RW-R+RW-R+RW-R+RW-G+RW-G+RW-G+RW-G+RW-R+RW-R+RW-R.litmus
+
+If you don't like command-line arguments, you can obtain a similar speedup
+by adding a "filter" clause with exactly the same expression as your
+"exists" clause.
+
+However, please note that seeing the full set of states can be extremely
+helpful when developing and debugging litmus tests.
+
+
+LIMITATIONS
+===========
+
+Limitations of the Linux-kernel memory model (LKMM) include:
+
+1.	Compiler optimizations are not accurately modeled.  Of course,
+	the use of READ_ONCE() and WRITE_ONCE() limits the compiler's
+	ability to optimize, but under some circumstances it is possible
+	for the compiler to undermine the memory model.  For more
+	information, see Documentation/explanation.txt (in particular,
+	the "THE PROGRAM ORDER RELATION: po AND po-loc" and "A WARNING"
+	sections).
+
+	Note that this limitation in turn limits LKMM's ability to
+	accurately model address, control, and data dependencies.
+	For example, if the compiler can deduce the value of some variable
+	carrying a dependency, then the compiler can break that dependency
+	by substituting a constant of that value.
+
+	Conversely, LKMM will sometimes overestimate the amount of
+	reordering compilers and CPUs can carry out, leading it to miss
+	some pretty obvious cases of ordering.  A simple example is:
+
+		r1 = READ_ONCE(x);
+		if (r1 == 0)
+			smp_mb();
+		WRITE_ONCE(y, 1);
+
+	The WRITE_ONCE() does not depend on the READ_ONCE(), and as a
+	result, LKMM does not claim ordering.  However, even though no
+	dependency is present, the WRITE_ONCE() will not be executed before
+	the READ_ONCE().  There are two reasons for this:
+
+                The presence of the smp_mb() in one of the branches
+                prevents the compiler from moving the WRITE_ONCE()
+                up before the "if" statement, since the compiler has
+                to assume that r1 will sometimes be 0 (but see the
+                comment below);
+
+                CPUs do not execute stores before po-earlier conditional
+                branches, even in cases where the store occurs after the
+                two arms of the branch have recombined.
+
+	It is clear that it is not dangerous in the slightest for LKMM to
+	make weaker guarantees than architectures.  In fact, it is
+	desirable, as it gives compilers room for making optimizations.
+	For instance, suppose that a 0 value in r1 would trigger undefined
+	behavior elsewhere.  Then a clever compiler might deduce that r1
+	can never be 0 in the if condition.  As a result, said clever
+	compiler might deem it safe to optimize away the smp_mb(),
+	eliminating the branch and any ordering an architecture would
+	guarantee otherwise.
+
+2.	Multiple access sizes for a single variable are not supported,
+	and neither are misaligned or partially overlapping accesses.
+
+3.	Exceptions and interrupts are not modeled.  In some cases,
+	this limitation can be overcome by modeling the interrupt or
+	exception with an additional process.
+
+4.	I/O such as MMIO or DMA is not supported.
+
+5.	Self-modifying code (such as that found in the kernel's
+	alternatives mechanism, function tracer, Berkeley Packet Filter
+	JIT compiler, and module loader) is not supported.
+
+6.	Complete modeling of all variants of atomic read-modify-write
+	operations, locking primitives, and RCU is not provided.
+	For example, call_rcu() and rcu_barrier() are not supported.
+	However, a substantial amount of support is provided for these
+	operations, as shown in the linux-kernel.def file.
+
+	Here are specific limitations:
+
+	a.	When rcu_assign_pointer() is passed NULL, the Linux
+		kernel provides no ordering, but LKMM models this
+		case as a store release.
+
+	b.	The "unless" RMW operations are not currently modeled:
+		atomic_long_add_unless(), atomic_inc_unless_negative(),
+		and atomic_dec_unless_positive().  These can be emulated
+		in litmus tests, for example, by using atomic_cmpxchg().
+
+		One exception of this limitation is atomic_add_unless(),
+		which is provided directly by herd7 (so no corresponding
+		definition in linux-kernel.def).  atomic_add_unless() is
+		modeled by herd7 therefore it can be used in litmus tests.
+
+	c.	The call_rcu() function is not modeled.  As was shown above,
+		it can be emulated in litmus tests by adding another
+		process that invokes synchronize_rcu() and the body of the
+		callback function, with (for example) a release-acquire
+		from the site of the emulated call_rcu() to the beginning
+		of the additional process.
+
+	d.	The rcu_barrier() function is not modeled.  It can be
+		emulated in litmus tests emulating call_rcu() via
+		(for example) a release-acquire from the end of each
+		additional call_rcu() process to the site of the
+		emulated rcu-barrier().
+
+	e.	Although sleepable RCU (SRCU) is now modeled, there
+		are some subtle differences between its semantics and
+		those in the Linux kernel.  For example, the kernel
+		might interpret the following sequence as two partially
+		overlapping SRCU read-side critical sections:
+
+			 1  r1 = srcu_read_lock(&my_srcu);
+			 2  do_something_1();
+			 3  r2 = srcu_read_lock(&my_srcu);
+			 4  do_something_2();
+			 5  srcu_read_unlock(&my_srcu, r1);
+			 6  do_something_3();
+			 7  srcu_read_unlock(&my_srcu, r2);
+
+		In contrast, LKMM will interpret this as a nested pair of
+		SRCU read-side critical sections, with the outer critical
+		section spanning lines 1-7 and the inner critical section
+		spanning lines 3-5.
+
+		This difference would be more of a concern had anyone
+		identified a reasonable use case for partially overlapping
+		SRCU read-side critical sections.  For more information
+		on the trickiness of such overlapping, please see:
+		https://paulmck.livejournal.com/40593.html
+
+	f.	Reader-writer locking is not modeled.  It can be
+		emulated in litmus tests using atomic read-modify-write
+		operations.
+
+The fragment of the C language supported by these litmus tests is quite
+limited and in some ways non-standard:
+
+1.	There is no automatic C-preprocessor pass.  You can of course
+	run it manually, if you choose.
+
+2.	There is no way to create functions other than the Pn() functions
+	that model the concurrent processes.
+
+3.	The Pn() functions' formal parameters must be pointers to the
+	global shared variables.  Nothing can be passed by value into
+	these functions.
+
+4.	The only functions that can be invoked are those built directly
+	into herd7 or that are defined in the linux-kernel.def file.
+
+5.	The "switch", "do", "for", "while", and "goto" C statements are
+	not supported.	The "switch" statement can be emulated by the
+	"if" statement.  The "do", "for", and "while" statements can
+	often be emulated by manually unrolling the loop, or perhaps by
+	enlisting the aid of the C preprocessor to minimize the resulting
+	code duplication.  Some uses of "goto" can be emulated by "if",
+	and some others by unrolling.
+
+6.	Although you can use a wide variety of types in litmus-test
+	variable declarations, and especially in global-variable
+	declarations, the "herd7" tool understands only int and
+	pointer types.	There is no support for floating-point types,
+	enumerations, characters, strings, arrays, or structures.
+
+7.	Parsing of variable declarations is very loose, with almost no
+	type checking.
+
+8.	Initializers differ from their C-language counterparts.
+	For example, when an initializer contains the name of a shared
+	variable, that name denotes a pointer to that variable, not
+	the current value of that variable.  For example, "int x = y"
+	is interpreted the way "int x = &y" would be in C.
+
+9.	Dynamic memory allocation is not supported, although this can
+	be worked around in some cases by supplying multiple statically
+	allocated variables.
+
+Some of these limitations may be overcome in the future, but others are
+more likely to be addressed by incorporating the Linux-kernel memory model
+into other tools.
+
+Finally, please note that LKMM is subject to change as hardware, use cases,
+and compilers evolve.
diff --git a/tools/memory-model/Documentation/ordering.txt b/tools/memory-model/Documentation/ordering.txt
new file mode 100644
index 000000000..9b0949d3f
--- /dev/null
+++ b/tools/memory-model/Documentation/ordering.txt
@@ -0,0 +1,556 @@
+This document gives an overview of the categories of memory-ordering
+operations provided by the Linux-kernel memory model (LKMM).
+
+
+Categories of Ordering
+======================
+
+This section lists LKMM's three top-level categories of memory-ordering
+operations in decreasing order of strength:
+
+1.	Barriers (also known as "fences").  A barrier orders some or
+	all of the CPU's prior operations against some or all of its
+	subsequent operations.
+
+2.	Ordered memory accesses.  These operations order themselves
+	against some or all of the CPU's prior accesses or some or all
+	of the CPU's subsequent accesses, depending on the subcategory
+	of the operation.
+
+3.	Unordered accesses, as the name indicates, have no ordering
+	properties except to the extent that they interact with an
+	operation in the previous categories.  This being the real world,
+	some of these "unordered" operations provide limited ordering
+	in some special situations.
+
+Each of the above categories is described in more detail by one of the
+following sections.
+
+
+Barriers
+========
+
+Each of the following categories of barriers is described in its own
+subsection below:
+
+a.	Full memory barriers.
+
+b.	Read-modify-write (RMW) ordering augmentation barriers.
+
+c.	Write memory barrier.
+
+d.	Read memory barrier.
+
+e.	Compiler barrier.
+
+Note well that many of these primitives generate absolutely no code
+in kernels built with CONFIG_SMP=n.  Therefore, if you are writing
+a device driver, which must correctly order accesses to a physical
+device even in kernels built with CONFIG_SMP=n, please use the
+ordering primitives provided for that purpose.  For example, instead of
+smp_mb(), use mb().  See the "Linux Kernel Device Drivers" book or the
+https://lwn.net/Articles/698014/ article for more information.
+
+
+Full Memory Barriers
+--------------------
+
+The Linux-kernel primitives that provide full ordering include:
+
+o	The smp_mb() full memory barrier.
+
+o	Value-returning RMW atomic operations whose names do not end in
+	_acquire, _release, or _relaxed.
+
+o	RCU's grace-period primitives.
+
+First, the smp_mb() full memory barrier orders all of the CPU's prior
+accesses against all subsequent accesses from the viewpoint of all CPUs.
+In other words, all CPUs will agree that any earlier action taken
+by that CPU happened before any later action taken by that same CPU.
+For example, consider the following:
+
+	WRITE_ONCE(x, 1);
+	smp_mb(); // Order store to x before load from y.
+	r1 = READ_ONCE(y);
+
+All CPUs will agree that the store to "x" happened before the load
+from "y", as indicated by the comment.  And yes, please comment your
+memory-ordering primitives.  It is surprisingly hard to remember their
+purpose after even a few months.
+
+Second, some RMW atomic operations provide full ordering.  These
+operations include value-returning RMW atomic operations (that is, those
+with non-void return types) whose names do not end in _acquire, _release,
+or _relaxed.  Examples include atomic_add_return(), atomic_dec_and_test(),
+cmpxchg(), and xchg().  Note that conditional RMW atomic operations such
+as cmpxchg() are only guaranteed to provide ordering when they succeed.
+When RMW atomic operations provide full ordering, they partition the
+CPU's accesses into three groups:
+
+1.	All code that executed prior to the RMW atomic operation.
+
+2.	The RMW atomic operation itself.
+
+3.	All code that executed after the RMW atomic operation.
+
+All CPUs will agree that any operation in a given partition happened
+before any operation in a higher-numbered partition.
+
+In contrast, non-value-returning RMW atomic operations (that is, those
+with void return types) do not guarantee any ordering whatsoever.  Nor do
+value-returning RMW atomic operations whose names end in _relaxed.
+Examples of the former include atomic_inc() and atomic_dec(),
+while examples of the latter include atomic_cmpxchg_relaxed() and
+atomic_xchg_relaxed().  Similarly, value-returning non-RMW atomic
+operations such as atomic_read() do not guarantee full ordering, and
+are covered in the later section on unordered operations.
+
+Value-returning RMW atomic operations whose names end in _acquire or
+_release provide limited ordering, and will be described later in this
+document.
+
+Finally, RCU's grace-period primitives provide full ordering.  These
+primitives include synchronize_rcu(), synchronize_rcu_expedited(),
+synchronize_srcu() and so on.  However, these primitives have orders
+of magnitude greater overhead than smp_mb(), atomic_xchg(), and so on.
+Furthermore, RCU's grace-period primitives can only be invoked in
+sleepable contexts.  Therefore, RCU's grace-period primitives are
+typically instead used to provide ordering against RCU read-side critical
+sections, as documented in their comment headers.  But of course if you
+need a synchronize_rcu() to interact with readers, it costs you nothing
+to also rely on its additional full-memory-barrier semantics.  Just please
+carefully comment this, otherwise your future self will hate you.
+
+
+RMW Ordering Augmentation Barriers
+----------------------------------
+
+As noted in the previous section, non-value-returning RMW operations
+such as atomic_inc() and atomic_dec() guarantee no ordering whatsoever.
+Nevertheless, a number of popular CPU families, including x86, provide
+full ordering for these primitives.  One way to obtain full ordering on
+all architectures is to add a call to smp_mb():
+
+	WRITE_ONCE(x, 1);
+	atomic_inc(&my_counter);
+	smp_mb(); // Inefficient on x86!!!
+	r1 = READ_ONCE(y);
+
+This works, but the added smp_mb() adds needless overhead for
+x86, on which atomic_inc() provides full ordering all by itself.
+The smp_mb__after_atomic() primitive can be used instead:
+
+	WRITE_ONCE(x, 1);
+	atomic_inc(&my_counter);
+	smp_mb__after_atomic(); // Order store to x before load from y.
+	r1 = READ_ONCE(y);
+
+The smp_mb__after_atomic() primitive emits code only on CPUs whose
+atomic_inc() implementations do not guarantee full ordering, thus
+incurring no unnecessary overhead on x86.  There are a number of
+variations on the smp_mb__*() theme:
+
+o	smp_mb__before_atomic(), which provides full ordering prior
+	to an unordered RMW atomic operation.
+
+o	smp_mb__after_atomic(), which, as shown above, provides full
+	ordering subsequent to an unordered RMW atomic operation.
+
+o	smp_mb__after_spinlock(), which provides full ordering subsequent
+	to a successful spinlock acquisition.  Note that spin_lock() is
+	always successful but spin_trylock() might not be.
+
+o	smp_mb__after_srcu_read_unlock(), which provides full ordering
+	subsequent to an srcu_read_unlock().
+
+It is bad practice to place code between the smp__*() primitive and the
+operation whose ordering that it is augmenting.  The reason is that the
+ordering of this intervening code will differ from one CPU architecture
+to another.
+
+
+Write Memory Barrier
+--------------------
+
+The Linux kernel's write memory barrier is smp_wmb().  If a CPU executes
+the following code:
+
+	WRITE_ONCE(x, 1);
+	smp_wmb();
+	WRITE_ONCE(y, 1);
+
+Then any given CPU will see the write to "x" has having happened before
+the write to "y".  However, you are usually better off using a release
+store, as described in the "Release Operations" section below.
+
+Note that smp_wmb() might fail to provide ordering for unmarked C-language
+stores because profile-driven optimization could determine that the
+value being overwritten is almost always equal to the new value.  Such a
+compiler might then reasonably decide to transform "x = 1" and "y = 1"
+as follows:
+
+	if (x != 1)
+		x = 1;
+	smp_wmb(); // BUG: does not order the reads!!!
+	if (y != 1)
+		y = 1;
+
+Therefore, if you need to use smp_wmb() with unmarked C-language writes,
+you will need to make sure that none of the compilers used to build
+the Linux kernel carry out this sort of transformation, both now and in
+the future.
+
+
+Read Memory Barrier
+-------------------
+
+The Linux kernel's read memory barrier is smp_rmb().  If a CPU executes
+the following code:
+
+	r0 = READ_ONCE(y);
+	smp_rmb();
+	r1 = READ_ONCE(x);
+
+Then any given CPU will see the read from "y" as having preceded the read from
+"x".  However, you are usually better off using an acquire load, as described
+in the "Acquire Operations" section below.
+
+Compiler Barrier
+----------------
+
+The Linux kernel's compiler barrier is barrier().  This primitive
+prohibits compiler code-motion optimizations that might move memory
+references across the point in the code containing the barrier(), but
+does not constrain hardware memory ordering.  For example, this can be
+used to prevent to compiler from moving code across an infinite loop:
+
+	WRITE_ONCE(x, 1);
+	while (dontstop)
+		barrier();
+	r1 = READ_ONCE(y);
+
+Without the barrier(), the compiler would be within its rights to move the
+WRITE_ONCE() to follow the loop.  This code motion could be problematic
+in the case where an interrupt handler terminates the loop.  Another way
+to handle this is to use READ_ONCE() for the load of "dontstop".
+
+Note that the barriers discussed previously use barrier() or its low-level
+equivalent in their implementations.
+
+
+Ordered Memory Accesses
+=======================
+
+The Linux kernel provides a wide variety of ordered memory accesses:
+
+a.	Release operations.
+
+b.	Acquire operations.
+
+c.	RCU read-side ordering.
+
+d.	Control dependencies.
+
+Each of the above categories has its own section below.
+
+
+Release Operations
+------------------
+
+Release operations include smp_store_release(), atomic_set_release(),
+rcu_assign_pointer(), and value-returning RMW operations whose names
+end in _release.  These operations order their own store against all
+of the CPU's prior memory accesses.  Release operations often provide
+improved readability and performance compared to explicit barriers.
+For example, use of smp_store_release() saves a line compared to the
+smp_wmb() example above:
+
+	WRITE_ONCE(x, 1);
+	smp_store_release(&y, 1);
+
+More important, smp_store_release() makes it easier to connect up the
+different pieces of the concurrent algorithm.  The variable stored to
+by the smp_store_release(), in this case "y", will normally be used in
+an acquire operation in other parts of the concurrent algorithm.
+
+To see the performance advantages, suppose that the above example read
+from "x" instead of writing to it.  Then an smp_wmb() could not guarantee
+ordering, and an smp_mb() would be needed instead:
+
+	r1 = READ_ONCE(x);
+	smp_mb();
+	WRITE_ONCE(y, 1);
+
+But smp_mb() often incurs much higher overhead than does
+smp_store_release(), which still provides the needed ordering of "x"
+against "y".  On x86, the version using smp_store_release() might compile
+to a simple load instruction followed by a simple store instruction.
+In contrast, the smp_mb() compiles to an expensive instruction that
+provides the needed ordering.
+
+There is a wide variety of release operations:
+
+o	Store operations, including not only the aforementioned
+	smp_store_release(), but also atomic_set_release(), and
+	atomic_long_set_release().
+
+o	RCU's rcu_assign_pointer() operation.  This is the same as
+	smp_store_release() except that: (1) It takes the pointer to
+	be assigned to instead of a pointer to that pointer, (2) It
+	is intended to be used in conjunction with rcu_dereference()
+	and similar rather than smp_load_acquire(), and (3) It checks
+	for an RCU-protected pointer in "sparse" runs.
+
+o	Value-returning RMW operations whose names end in _release,
+	such as atomic_fetch_add_release() and cmpxchg_release().
+	Note that release ordering is guaranteed only against the
+	memory-store portion of the RMW operation, and not against the
+	memory-load portion.  Note also that conditional operations such
+	as cmpxchg_release() are only guaranteed to provide ordering
+	when they succeed.
+
+As mentioned earlier, release operations are often paired with acquire
+operations, which are the subject of the next section.
+
+
+Acquire Operations
+------------------
+
+Acquire operations include smp_load_acquire(), atomic_read_acquire(),
+and value-returning RMW operations whose names end in _acquire.   These
+operations order their own load against all of the CPU's subsequent
+memory accesses.  Acquire operations often provide improved performance
+and readability compared to explicit barriers.  For example, use of
+smp_load_acquire() saves a line compared to the smp_rmb() example above:
+
+	r0 = smp_load_acquire(&y);
+	r1 = READ_ONCE(x);
+
+As with smp_store_release(), this also makes it easier to connect
+the different pieces of the concurrent algorithm by looking for the
+smp_store_release() that stores to "y".  In addition, smp_load_acquire()
+improves upon smp_rmb() by ordering against subsequent stores as well
+as against subsequent loads.
+
+There are a couple of categories of acquire operations:
+
+o	Load operations, including not only the aforementioned
+	smp_load_acquire(), but also atomic_read_acquire(), and
+	atomic64_read_acquire().
+
+o	Value-returning RMW operations whose names end in _acquire,
+	such as atomic_xchg_acquire() and atomic_cmpxchg_acquire().
+	Note that acquire ordering is guaranteed only against the
+	memory-load portion of the RMW operation, and not against the
+	memory-store portion.  Note also that conditional operations
+	such as atomic_cmpxchg_acquire() are only guaranteed to provide
+	ordering when they succeed.
+
+Symmetry being what it is, acquire operations are often paired with the
+release operations covered earlier.  For example, consider the following
+example, where task0() and task1() execute concurrently:
+
+	void task0(void)
+	{
+		WRITE_ONCE(x, 1);
+		smp_store_release(&y, 1);
+	}
+
+	void task1(void)
+	{
+		r0 = smp_load_acquire(&y);
+		r1 = READ_ONCE(x);
+	}
+
+If "x" and "y" are both initially zero, then either r0's final value
+will be zero or r1's final value will be one, thus providing the required
+ordering.
+
+
+RCU Read-Side Ordering
+----------------------
+
+This category includes read-side markers such as rcu_read_lock()
+and rcu_read_unlock() as well as pointer-traversal primitives such as
+rcu_dereference() and srcu_dereference().
+
+Compared to locking primitives and RMW atomic operations, markers
+for RCU read-side critical sections incur very low overhead because
+they interact only with the corresponding grace-period primitives.
+For example, the rcu_read_lock() and rcu_read_unlock() markers interact
+with synchronize_rcu(), synchronize_rcu_expedited(), and call_rcu().
+The way this works is that if a given call to synchronize_rcu() cannot
+prove that it started before a given call to rcu_read_lock(), then
+that synchronize_rcu() must block until the matching rcu_read_unlock()
+is reached.  For more information, please see the synchronize_rcu()
+docbook header comment and the material in Documentation/RCU.
+
+RCU's pointer-traversal primitives, including rcu_dereference() and
+srcu_dereference(), order their load (which must be a pointer) against any
+of the CPU's subsequent memory accesses whose address has been calculated
+from the value loaded.  There is said to be an *address dependency*
+from the value returned by the rcu_dereference() or srcu_dereference()
+to that subsequent memory access.
+
+A call to rcu_dereference() for a given RCU-protected pointer is
+usually paired with a call to a call to rcu_assign_pointer() for that
+same pointer in much the same way that a call to smp_load_acquire() is
+paired with a call to smp_store_release().  Calls to rcu_dereference()
+and rcu_assign_pointer are often buried in other APIs, for example,
+the RCU list API members defined in include/linux/rculist.h.  For more
+information, please see the docbook headers in that file, the most
+recent LWN article on the RCU API (https://lwn.net/Articles/777036/),
+and of course the material in Documentation/RCU.
+
+If the pointer value is manipulated between the rcu_dereference()
+that returned it and a later dereference(), please read
+Documentation/RCU/rcu_dereference.rst.  It can also be quite helpful to
+review uses in the Linux kernel.
+
+
+Control Dependencies
+--------------------
+
+A control dependency extends from a marked load (READ_ONCE() or stronger)
+through an "if" condition to a marked store (WRITE_ONCE() or stronger)
+that is executed only by one of the legs of that "if" statement.
+Control dependencies are so named because they are mediated by
+control-flow instructions such as comparisons and conditional branches.
+
+In short, you can use a control dependency to enforce ordering between
+an READ_ONCE() and a WRITE_ONCE() when there is an "if" condition
+between them.  The canonical example is as follows:
+
+	q = READ_ONCE(a);
+	if (q)
+		WRITE_ONCE(b, 1);
+
+In this case, all CPUs would see the read from "a" as happening before
+the write to "b".
+
+However, control dependencies are easily destroyed by compiler
+optimizations, so any use of control dependencies must take into account
+all of the compilers used to build the Linux kernel.  Please see the
+"control-dependencies.txt" file for more information.
+
+
+Unordered Accesses
+==================
+
+Each of these two categories of unordered accesses has a section below:
+
+a.	Unordered marked operations.
+
+b.	Unmarked C-language accesses.
+
+
+Unordered Marked Operations
+---------------------------
+
+Unordered operations to different variables are just that, unordered.
+However, if a group of CPUs apply these operations to a single variable,
+all the CPUs will agree on the operation order.  Of course, the ordering
+of unordered marked accesses can also be constrained using the mechanisms
+described earlier in this document.
+
+These operations come in three categories:
+
+o	Marked writes, such as WRITE_ONCE() and atomic_set().  These
+	primitives required the compiler to emit the corresponding store
+	instructions in the expected execution order, thus suppressing
+	a number of destructive optimizations.	However, they provide no
+	hardware ordering guarantees, and in fact many CPUs will happily
+	reorder marked writes with each other or with other unordered
+	operations, unless these operations are to the same variable.
+
+o	Marked reads, such as READ_ONCE() and atomic_read().  These
+	primitives required the compiler to emit the corresponding load
+	instructions in the expected execution order, thus suppressing
+	a number of destructive optimizations.	However, they provide no
+	hardware ordering guarantees, and in fact many CPUs will happily
+	reorder marked reads with each other or with other unordered
+	operations, unless these operations are to the same variable.
+
+o	Unordered RMW atomic operations.  These are non-value-returning
+	RMW atomic operations whose names do not end in _acquire or
+	_release, and also value-returning RMW operations whose names
+	end in _relaxed.  Examples include atomic_add(), atomic_or(),
+	and atomic64_fetch_xor_relaxed().  These operations do carry
+	out the specified RMW operation atomically, for example, five
+	concurrent atomic_inc() operations applied to a given variable
+	will reliably increase the value of that variable by five.
+	However, many CPUs will happily reorder these operations with
+	each other or with other unordered operations.
+
+	This category of operations can be efficiently ordered using
+	smp_mb__before_atomic() and smp_mb__after_atomic(), as was
+	discussed in the "RMW Ordering Augmentation Barriers" section.
+
+In short, these operations can be freely reordered unless they are all
+operating on a single variable or unless they are constrained by one of
+the operations called out earlier in this document.
+
+
+Unmarked C-Language Accesses
+----------------------------
+
+Unmarked C-language accesses are normal variable accesses to normal
+variables, that is, to variables that are not "volatile" and are not
+C11 atomic variables.  These operations provide no ordering guarantees,
+and further do not guarantee "atomic" access.  For example, the compiler
+might (and sometimes does) split a plain C-language store into multiple
+smaller stores.  A load from that same variable running on some other
+CPU while such a store is executing might see a value that is a mashup
+of the old value and the new value.
+
+Unmarked C-language accesses are unordered, and are also subject to
+any number of compiler optimizations, many of which can break your
+concurrent code.  It is possible to used unmarked C-language accesses for
+shared variables that are subject to concurrent access, but great care
+is required on an ongoing basis.  The compiler-constraining barrier()
+primitive can be helpful, as can the various ordering primitives discussed
+in this document.  It nevertheless bears repeating that use of unmarked
+C-language accesses requires careful attention to not just your code,
+but to all the compilers that might be used to build it.  Such compilers
+might replace a series of loads with a single load, and might replace
+a series of stores with a single store.  Some compilers will even split
+a single store into multiple smaller stores.
+
+But there are some ways of using unmarked C-language accesses for shared
+variables without such worries:
+
+o	Guard all accesses to a given variable by a particular lock,
+	so that there are never concurrent conflicting accesses to
+	that variable.	(There are "conflicting accesses" when
+	(1) at least one of the concurrent accesses to a variable is an
+	unmarked C-language access and (2) when at least one of those
+	accesses is a write, whether marked or not.)
+
+o	As above, but using other synchronization primitives such
+	as reader-writer locks or sequence locks.
+
+o	Use locking or other means to ensure that all concurrent accesses
+	to a given variable are reads.
+
+o	Restrict use of a given variable to statistics or heuristics
+	where the occasional bogus value can be tolerated.
+
+o	Declare the accessed variables as C11 atomics.
+	https://lwn.net/Articles/691128/
+
+o	Declare the accessed variables as "volatile".
+
+If you need to live more dangerously, please do take the time to
+understand the compilers.  One place to start is these two LWN
+articles:
+
+Who's afraid of a big bad optimizing compiler?
+	https://lwn.net/Articles/793253
+Calibrating your fear of big bad optimizing compilers
+	https://lwn.net/Articles/799218
+
+Used properly, unmarked C-language accesses can reduce overhead on
+fastpaths.  However, the price is great care and continual attention
+to your compiler as new versions come out and as new optimizations
+are enabled.
diff --git a/tools/memory-model/Documentation/recipes.txt b/tools/memory-model/Documentation/recipes.txt
new file mode 100644
index 000000000..03f58b11c
--- /dev/null
+++ b/tools/memory-model/Documentation/recipes.txt
@@ -0,0 +1,570 @@
+This document provides "recipes", that is, litmus tests for commonly
+occurring situations, as well as a few that illustrate subtly broken but
+attractive nuisances.  Many of these recipes include example code from
+v5.7 of the Linux kernel.
+
+The first section covers simple special cases, the second section
+takes off the training wheels to cover more involved examples,
+and the third section provides a few rules of thumb.
+
+
+Simple special cases
+====================
+
+This section presents two simple special cases, the first being where
+there is only one CPU or only one memory location is accessed, and the
+second being use of that old concurrency workhorse, locking.
+
+
+Single CPU or single memory location
+------------------------------------
+
+If there is only one CPU on the one hand or only one variable
+on the other, the code will execute in order.  There are (as
+usual) some things to be careful of:
+
+1.	Some aspects of the C language are unordered.  For example,
+	in the expression "f(x) + g(y)", the order in which f and g are
+	called is not defined; the object code is allowed to use either
+	order or even to interleave the computations.
+
+2.	Compilers are permitted to use the "as-if" rule.  That is, a
+	compiler can emit whatever code it likes for normal accesses,
+	as long as the results of a single-threaded execution appear
+	just as if the compiler had followed all the relevant rules.
+	To see this, compile with a high level of optimization and run
+	the debugger on the resulting binary.
+
+3.	If there is only one variable but multiple CPUs, that variable
+	must be properly aligned and all accesses to that variable must
+	be full sized.	Variables that straddle cachelines or pages void
+	your full-ordering warranty, as do undersized accesses that load
+	from or store to only part of the variable.
+
+4.	If there are multiple CPUs, accesses to shared variables should
+	use READ_ONCE() and WRITE_ONCE() or stronger to prevent load/store
+	tearing, load/store fusing, and invented loads and stores.
+	There are exceptions to this rule, including:
+
+	i.	When there is no possibility of a given shared variable
+		being updated by some other CPU, for example, while
+		holding the update-side lock, reads from that variable
+		need not use READ_ONCE().
+
+	ii.	When there is no possibility of a given shared variable
+		being either read or updated by other CPUs, for example,
+		when running during early boot, reads from that variable
+		need not use READ_ONCE() and writes to that variable
+		need not use WRITE_ONCE().
+
+
+Locking
+-------
+
+Locking is well-known and straightforward, at least if you don't think
+about it too hard.  And the basic rule is indeed quite simple: Any CPU that
+has acquired a given lock sees any changes previously seen or made by any
+CPU before it released that same lock.  Note that this statement is a bit
+stronger than "Any CPU holding a given lock sees all changes made by any
+CPU during the time that CPU was holding this same lock".  For example,
+consider the following pair of code fragments:
+
+	/* See MP+polocks.litmus. */
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		spin_lock(&mylock);
+		WRITE_ONCE(y, 1);
+		spin_unlock(&mylock);
+	}
+
+	void CPU1(void)
+	{
+		spin_lock(&mylock);
+		r0 = READ_ONCE(y);
+		spin_unlock(&mylock);
+		r1 = READ_ONCE(x);
+	}
+
+The basic rule guarantees that if CPU0() acquires mylock before CPU1(),
+then both r0 and r1 must be set to the value 1.  This also has the
+consequence that if the final value of r0 is equal to 1, then the final
+value of r1 must also be equal to 1.  In contrast, the weaker rule would
+say nothing about the final value of r1.
+
+The converse to the basic rule also holds, as illustrated by the
+following litmus test:
+
+	/* See MP+porevlocks.litmus. */
+	void CPU0(void)
+	{
+		r0 = READ_ONCE(y);
+		spin_lock(&mylock);
+		r1 = READ_ONCE(x);
+		spin_unlock(&mylock);
+	}
+
+	void CPU1(void)
+	{
+		spin_lock(&mylock);
+		WRITE_ONCE(x, 1);
+		spin_unlock(&mylock);
+		WRITE_ONCE(y, 1);
+	}
+
+This converse to the basic rule guarantees that if CPU0() acquires
+mylock before CPU1(), then both r0 and r1 must be set to the value 0.
+This also has the consequence that if the final value of r1 is equal
+to 0, then the final value of r0 must also be equal to 0.  In contrast,
+the weaker rule would say nothing about the final value of r0.
+
+These examples show only a single pair of CPUs, but the effects of the
+locking basic rule extend across multiple acquisitions of a given lock
+across multiple CPUs.
+
+However, it is not necessarily the case that accesses ordered by
+locking will be seen as ordered by CPUs not holding that lock.
+Consider this example:
+
+	/* See Z6.0+pooncelock+pooncelock+pombonce.litmus. */
+	void CPU0(void)
+	{
+		spin_lock(&mylock);
+		WRITE_ONCE(x, 1);
+		WRITE_ONCE(y, 1);
+		spin_unlock(&mylock);
+	}
+
+	void CPU1(void)
+	{
+		spin_lock(&mylock);
+		r0 = READ_ONCE(y);
+		WRITE_ONCE(z, 1);
+		spin_unlock(&mylock);
+	}
+
+	void CPU2(void)
+	{
+		WRITE_ONCE(z, 2);
+		smp_mb();
+		r1 = READ_ONCE(x);
+	}
+
+Counter-intuitive though it might be, it is quite possible to have
+the final value of r0 be 1, the final value of z be 2, and the final
+value of r1 be 0.  The reason for this surprising outcome is that
+CPU2() never acquired the lock, and thus did not benefit from the
+lock's ordering properties.
+
+Ordering can be extended to CPUs not holding the lock by careful use
+of smp_mb__after_spinlock():
+
+	/* See Z6.0+pooncelock+poonceLock+pombonce.litmus. */
+	void CPU0(void)
+	{
+		spin_lock(&mylock);
+		WRITE_ONCE(x, 1);
+		WRITE_ONCE(y, 1);
+		spin_unlock(&mylock);
+	}
+
+	void CPU1(void)
+	{
+		spin_lock(&mylock);
+		smp_mb__after_spinlock();
+		r0 = READ_ONCE(y);
+		WRITE_ONCE(z, 1);
+		spin_unlock(&mylock);
+	}
+
+	void CPU2(void)
+	{
+		WRITE_ONCE(z, 2);
+		smp_mb();
+		r1 = READ_ONCE(x);
+	}
+
+This addition of smp_mb__after_spinlock() strengthens the lock acquisition
+sufficiently to rule out the counter-intuitive outcome.
+
+
+Taking off the training wheels
+==============================
+
+This section looks at more complex examples, including message passing,
+load buffering, release-acquire chains, store buffering.
+Many classes of litmus tests have abbreviated names, which may be found
+here: https://www.cl.cam.ac.uk/~pes20/ppc-supplemental/test6.pdf
+
+
+Message passing (MP)
+--------------------
+
+The MP pattern has one CPU execute a pair of stores to a pair of variables
+and another CPU execute a pair of loads from this same pair of variables,
+but in the opposite order.  The goal is to avoid the counter-intuitive
+outcome in which the first load sees the value written by the second store
+but the second load does not see the value written by the first store.
+In the absence of any ordering, this goal may not be met, as can be seen
+in the MP+poonceonces.litmus litmus test.  This section therefore looks at
+a number of ways of meeting this goal.
+
+
+Release and acquire
+~~~~~~~~~~~~~~~~~~~
+
+Use of smp_store_release() and smp_load_acquire() is one way to force
+the desired MP ordering.  The general approach is shown below:
+
+	/* See MP+pooncerelease+poacquireonce.litmus. */
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		smp_store_release(&y, 1);
+	}
+
+	void CPU1(void)
+	{
+		r0 = smp_load_acquire(&y);
+		r1 = READ_ONCE(x);
+	}
+
+The smp_store_release() macro orders any prior accesses against the
+store, while the smp_load_acquire macro orders the load against any
+subsequent accesses.  Therefore, if the final value of r0 is the value 1,
+the final value of r1 must also be the value 1.
+
+The init_stack_slab() function in lib/stackdepot.c uses release-acquire
+in this way to safely initialize of a slab of the stack.  Working out
+the mutual-exclusion design is left as an exercise for the reader.
+
+
+Assign and dereference
+~~~~~~~~~~~~~~~~~~~~~~
+
+Use of rcu_assign_pointer() and rcu_dereference() is quite similar to the
+use of smp_store_release() and smp_load_acquire(), except that both
+rcu_assign_pointer() and rcu_dereference() operate on RCU-protected
+pointers.  The general approach is shown below:
+
+	/* See MP+onceassign+derefonce.litmus. */
+	int z;
+	int *y = &z;
+	int x;
+
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		rcu_assign_pointer(y, &x);
+	}
+
+	void CPU1(void)
+	{
+		rcu_read_lock();
+		r0 = rcu_dereference(y);
+		r1 = READ_ONCE(*r0);
+		rcu_read_unlock();
+	}
+
+In this example, if the final value of r0 is &x then the final value of
+r1 must be 1.
+
+The rcu_assign_pointer() macro has the same ordering properties as does
+smp_store_release(), but the rcu_dereference() macro orders the load only
+against later accesses that depend on the value loaded.  A dependency
+is present if the value loaded determines the address of a later access
+(address dependency, as shown above), the value written by a later store
+(data dependency), or whether or not a later store is executed in the
+first place (control dependency).  Note that the term "data dependency"
+is sometimes casually used to cover both address and data dependencies.
+
+In lib/math/prime_numbers.c, the expand_to_next_prime() function invokes
+rcu_assign_pointer(), and the next_prime_number() function invokes
+rcu_dereference().  This combination mediates access to a bit vector
+that is expanded as additional primes are needed.
+
+
+Write and read memory barriers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is usually better to use smp_store_release() instead of smp_wmb()
+and to use smp_load_acquire() instead of smp_rmb().  However, the older
+smp_wmb() and smp_rmb() APIs are still heavily used, so it is important
+to understand their use cases.  The general approach is shown below:
+
+	/* See MP+fencewmbonceonce+fencermbonceonce.litmus. */
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		smp_wmb();
+		WRITE_ONCE(y, 1);
+	}
+
+	void CPU1(void)
+	{
+		r0 = READ_ONCE(y);
+		smp_rmb();
+		r1 = READ_ONCE(x);
+	}
+
+The smp_wmb() macro orders prior stores against later stores, and the
+smp_rmb() macro orders prior loads against later loads.  Therefore, if
+the final value of r0 is 1, the final value of r1 must also be 1.
+
+The xlog_state_switch_iclogs() function in fs/xfs/xfs_log.c contains
+the following write-side code fragment:
+
+	log->l_curr_block -= log->l_logBBsize;
+	ASSERT(log->l_curr_block >= 0);
+	smp_wmb();
+	log->l_curr_cycle++;
+
+And the xlog_valid_lsn() function in fs/xfs/xfs_log_priv.h contains
+the corresponding read-side code fragment:
+
+	cur_cycle = READ_ONCE(log->l_curr_cycle);
+	smp_rmb();
+	cur_block = READ_ONCE(log->l_curr_block);
+
+Alternatively, consider the following comment in function
+perf_output_put_handle() in kernel/events/ring_buffer.c:
+
+	 *   kernel				user
+	 *
+	 *   if (LOAD ->data_tail) {		LOAD ->data_head
+	 *			(A)		smp_rmb()	(C)
+	 *	STORE $data			LOAD $data
+	 *	smp_wmb()	(B)		smp_mb()	(D)
+	 *	STORE ->data_head		STORE ->data_tail
+	 *   }
+
+The B/C pairing is an example of the MP pattern using smp_wmb() on the
+write side and smp_rmb() on the read side.
+
+Of course, given that smp_mb() is strictly stronger than either smp_wmb()
+or smp_rmb(), any code fragment that would work with smp_rmb() and
+smp_wmb() would also work with smp_mb() replacing either or both of the
+weaker barriers.
+
+
+Load buffering (LB)
+-------------------
+
+The LB pattern has one CPU load from one variable and then store to a
+second, while another CPU loads from the second variable and then stores
+to the first.  The goal is to avoid the counter-intuitive situation where
+each load reads the value written by the other CPU's store.  In the
+absence of any ordering it is quite possible that this may happen, as
+can be seen in the LB+poonceonces.litmus litmus test.
+
+One way of avoiding the counter-intuitive outcome is through the use of a
+control dependency paired with a full memory barrier:
+
+	/* See LB+fencembonceonce+ctrlonceonce.litmus. */
+	void CPU0(void)
+	{
+		r0 = READ_ONCE(x);
+		if (r0)
+			WRITE_ONCE(y, 1);
+	}
+
+	void CPU1(void)
+	{
+		r1 = READ_ONCE(y);
+		smp_mb();
+		WRITE_ONCE(x, 1);
+	}
+
+This pairing of a control dependency in CPU0() with a full memory
+barrier in CPU1() prevents r0 and r1 from both ending up equal to 1.
+
+The A/D pairing from the ring-buffer use case shown earlier also
+illustrates LB.  Here is a repeat of the comment in
+perf_output_put_handle() in kernel/events/ring_buffer.c, showing a
+control dependency on the kernel side and a full memory barrier on
+the user side:
+
+	 *   kernel				user
+	 *
+	 *   if (LOAD ->data_tail) {		LOAD ->data_head
+	 *			(A)		smp_rmb()	(C)
+	 *	STORE $data			LOAD $data
+	 *	smp_wmb()	(B)		smp_mb()	(D)
+	 *	STORE ->data_head		STORE ->data_tail
+	 *   }
+	 *
+	 * Where A pairs with D, and B pairs with C.
+
+The kernel's control dependency between the load from ->data_tail
+and the store to data combined with the user's full memory barrier
+between the load from data and the store to ->data_tail prevents
+the counter-intuitive outcome where the kernel overwrites the data
+before the user gets done loading it.
+
+
+Release-acquire chains
+----------------------
+
+Release-acquire chains are a low-overhead, flexible, and easy-to-use
+method of maintaining order.  However, they do have some limitations that
+need to be fully understood.  Here is an example that maintains order:
+
+	/* See ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus. */
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		smp_store_release(&y, 1);
+	}
+
+	void CPU1(void)
+	{
+		r0 = smp_load_acquire(y);
+		smp_store_release(&z, 1);
+	}
+
+	void CPU2(void)
+	{
+		r1 = smp_load_acquire(z);
+		r2 = READ_ONCE(x);
+	}
+
+In this case, if r0 and r1 both have final values of 1, then r2 must
+also have a final value of 1.
+
+The ordering in this example is stronger than it needs to be.  For
+example, ordering would still be preserved if CPU1()'s smp_load_acquire()
+invocation was replaced with READ_ONCE().
+
+It is tempting to assume that CPU0()'s store to x is globally ordered
+before CPU1()'s store to z, but this is not the case:
+
+	/* See Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus. */
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		smp_store_release(&y, 1);
+	}
+
+	void CPU1(void)
+	{
+		r0 = smp_load_acquire(y);
+		smp_store_release(&z, 1);
+	}
+
+	void CPU2(void)
+	{
+		WRITE_ONCE(z, 2);
+		smp_mb();
+		r1 = READ_ONCE(x);
+	}
+
+One might hope that if the final value of r0 is 1 and the final value
+of z is 2, then the final value of r1 must also be 1, but it really is
+possible for r1 to have the final value of 0.  The reason, of course,
+is that in this version, CPU2() is not part of the release-acquire chain.
+This situation is accounted for in the rules of thumb below.
+
+Despite this limitation, release-acquire chains are low-overhead as
+well as simple and powerful, at least as memory-ordering mechanisms go.
+
+
+Store buffering
+---------------
+
+Store buffering can be thought of as upside-down load buffering, so
+that one CPU first stores to one variable and then loads from a second,
+while another CPU stores to the second variable and then loads from the
+first.  Preserving order requires nothing less than full barriers:
+
+	/* See SB+fencembonceonces.litmus. */
+	void CPU0(void)
+	{
+		WRITE_ONCE(x, 1);
+		smp_mb();
+		r0 = READ_ONCE(y);
+	}
+
+	void CPU1(void)
+	{
+		WRITE_ONCE(y, 1);
+		smp_mb();
+		r1 = READ_ONCE(x);
+	}
+
+Omitting either smp_mb() will allow both r0 and r1 to have final
+values of 0, but providing both full barriers as shown above prevents
+this counter-intuitive outcome.
+
+This pattern most famously appears as part of Dekker's locking
+algorithm, but it has a much more practical use within the Linux kernel
+of ordering wakeups.  The following comment taken from waitqueue_active()
+in include/linux/wait.h shows the canonical pattern:
+
+ *      CPU0 - waker                    CPU1 - waiter
+ *
+ *                                      for (;;) {
+ *      @cond = true;                     prepare_to_wait(&wq_head, &wait, state);
+ *      smp_mb();                         // smp_mb() from set_current_state()
+ *      if (waitqueue_active(wq_head))         if (@cond)
+ *        wake_up(wq_head);                      break;
+ *                                        schedule();
+ *                                      }
+ *                                      finish_wait(&wq_head, &wait);
+
+On CPU0, the store is to @cond and the load is in waitqueue_active().
+On CPU1, prepare_to_wait() contains both a store to wq_head and a call
+to set_current_state(), which contains an smp_mb() barrier; the load is
+"if (@cond)".  The full barriers prevent the undesirable outcome where
+CPU1 puts the waiting task to sleep and CPU0 fails to wake it up.
+
+Note that use of locking can greatly simplify this pattern.
+
+
+Rules of thumb
+==============
+
+There might seem to be no pattern governing what ordering primitives are
+needed in which situations, but this is not the case.  There is a pattern
+based on the relation between the accesses linking successive CPUs in a
+given litmus test.  There are three types of linkage:
+
+1.	Write-to-read, where the next CPU reads the value that the
+	previous CPU wrote.  The LB litmus-test patterns contain only
+	this type of relation.	In formal memory-modeling texts, this
+	relation is called "reads-from" and is usually abbreviated "rf".
+
+2.	Read-to-write, where the next CPU overwrites the value that the
+	previous CPU read.  The SB litmus test contains only this type
+	of relation.  In formal memory-modeling texts, this relation is
+	often called "from-reads" and is sometimes abbreviated "fr".
+
+3.	Write-to-write, where the next CPU overwrites the value written
+	by the previous CPU.  The Z6.0 litmus test pattern contains a
+	write-to-write relation between the last access of CPU1() and
+	the first access of CPU2().  In formal memory-modeling texts,
+	this relation is often called "coherence order" and is sometimes
+	abbreviated "co".  In the C++ standard, it is instead called
+	"modification order" and often abbreviated "mo".
+
+The strength of memory ordering required for a given litmus test to
+avoid a counter-intuitive outcome depends on the types of relations
+linking the memory accesses for the outcome in question:
+
+o	If all links are write-to-read links, then the weakest
+	possible ordering within each CPU suffices.  For example, in
+	the LB litmus test, a control dependency was enough to do the
+	job.
+
+o	If all but one of the links are write-to-read links, then a
+	release-acquire chain suffices.  Both the MP and the ISA2
+	litmus tests illustrate this case.
+
+o	If more than one of the links are something other than
+	write-to-read links, then a full memory barrier is required
+	between each successive pair of non-write-to-read links.  This
+	case is illustrated by the Z6.0 litmus tests, both in the
+	locking and in the release-acquire sections.
+
+However, if you find yourself having to stretch these rules of thumb
+to fit your situation, you should consider creating a litmus test and
+running it on the model.
diff --git a/tools/memory-model/Documentation/references.txt b/tools/memory-model/Documentation/references.txt
new file mode 100644
index 000000000..c5fdfd19d
--- /dev/null
+++ b/tools/memory-model/Documentation/references.txt
@@ -0,0 +1,131 @@
+This document provides background reading for memory models and related
+tools.  These documents are aimed at kernel hackers who are interested
+in memory models.
+
+
+Hardware manuals and models
+===========================
+
+o	SPARC International Inc. (Ed.). 1994. "The SPARC Architecture
+	Reference Manual Version 9". SPARC International Inc.
+
+o	Compaq Computer Corporation (Ed.). 2002. "Alpha Architecture
+	Reference Manual".  Compaq Computer Corporation.
+
+o	Intel Corporation (Ed.). 2002. "A Formal Specification of Intel
+	Itanium Processor Family Memory Ordering". Intel Corporation.
+
+o	Intel Corporation (Ed.). 2002. "Intel 64 and IA-32 Architectures
+	Software Developer’s Manual". Intel Corporation.
+
+o	Peter Sewell, Susmit Sarkar, Scott Owens, Francesco Zappa Nardelli,
+	and Magnus O. Myreen. 2010. "x86-TSO: A Rigorous and Usable
+	Programmer's Model for x86 Multiprocessors". Commun. ACM 53, 7
+	(July, 2010), 89-97. http://doi.acm.org/10.1145/1785414.1785443
+
+o	IBM Corporation (Ed.). 2009. "Power ISA Version 2.06". IBM
+	Corporation.
+
+o	ARM Ltd. (Ed.). 2009. "ARM Barrier Litmus Tests and Cookbook".
+	ARM Ltd.
+
+o	Susmit Sarkar, Peter Sewell, Jade Alglave, Luc Maranget, and
+	Derek Williams.  2011. "Understanding POWER Multiprocessors". In
+	Proceedings of the 32Nd ACM SIGPLAN Conference on Programming
+	Language Design and Implementation (PLDI ’11). ACM, New York,
+	NY, USA, 175–186.
+
+o	Susmit Sarkar, Kayvan Memarian, Scott Owens, Mark Batty,
+	Peter Sewell, Luc Maranget, Jade Alglave, and Derek Williams.
+	2012. "Synchronising C/C++ and POWER". In Proceedings of the 33rd
+	ACM SIGPLAN Conference on Programming Language Design and
+	Implementation (PLDI '12). ACM, New York, NY, USA, 311-322.
+
+o	ARM Ltd. (Ed.). 2014. "ARM Architecture Reference Manual (ARMv8,
+	for ARMv8-A architecture profile)". ARM Ltd.
+
+o	Imagination Technologies, LTD. 2015. "MIPS(R) Architecture
+	For Programmers, Volume II-A: The MIPS64(R) Instruction,
+	Set Reference Manual". Imagination Technologies,
+	LTD. https://imgtec.com/?do-download=4302.
+
+o	Shaked Flur, Kathryn E. Gray, Christopher Pulte, Susmit
+	Sarkar, Ali Sezgin, Luc Maranget, Will Deacon, and Peter
+	Sewell. 2016. "Modelling the ARMv8 Architecture, Operationally:
+	Concurrency and ISA". In Proceedings of the 43rd Annual ACM
+	SIGPLAN-SIGACT Symposium on Principles of Programming Languages
+	(POPL ’16). ACM, New York, NY, USA, 608–621.
+
+o	Shaked Flur, Susmit Sarkar, Christopher Pulte, Kyndylan Nienhuis,
+	Luc Maranget, Kathryn E. Gray, Ali Sezgin, Mark Batty, and Peter
+	Sewell. 2017. "Mixed-size Concurrency: ARM, POWER, C/C++11,
+	and SC". In Proceedings of the 44th ACM SIGPLAN Symposium on
+	Principles of Programming Languages (POPL 2017). ACM, New York,
+	NY, USA, 429–442.
+
+o	Christopher Pulte, Shaked Flur, Will Deacon, Jon French,
+	Susmit Sarkar, and Peter Sewell. 2018. "Simplifying ARM concurrency:
+	multicopy-atomic axiomatic and operational models for ARMv8". In
+	Proceedings of the ACM on Programming Languages, Volume 2, Issue
+	POPL, Article No. 19. ACM, New York, NY, USA.
+
+
+Linux-kernel memory model
+=========================
+
+o	Jade Alglave, Will Deacon, Boqun Feng, David Howells, Daniel
+	Lustig, Luc Maranget, Paul E. McKenney, Andrea Parri, Nicholas
+	Piggin, Alan Stern, Akira Yokosawa, and Peter Zijlstra.
+	2019. "Calibrating your fear of big bad optimizing compilers"
+	Linux Weekly News.  https://lwn.net/Articles/799218/
+
+o	Jade Alglave, Will Deacon, Boqun Feng, David Howells, Daniel
+	Lustig, Luc Maranget, Paul E. McKenney, Andrea Parri, Nicholas
+	Piggin, Alan Stern, Akira Yokosawa, and Peter Zijlstra.
+	2019. "Who's afraid of a big bad optimizing compiler?"
+	Linux Weekly News.  https://lwn.net/Articles/793253/
+
+o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
+	Alan Stern.  2018. "Frightening small children and disconcerting
+	grown-ups: Concurrency in the Linux kernel". In Proceedings of
+	the 23rd International Conference on Architectural Support for
+	Programming Languages and Operating Systems (ASPLOS 2018). ACM,
+	New York, NY, USA, 405-418.  Webpage: http://diy.inria.fr/linux/.
+
+o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
+	Alan Stern.  2017.  "A formal kernel memory-ordering model (part 1)"
+	Linux Weekly News.  https://lwn.net/Articles/718628/
+
+o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
+	Alan Stern.  2017.  "A formal kernel memory-ordering model (part 2)"
+	Linux Weekly News.  https://lwn.net/Articles/720550/
+
+o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
+	Alan Stern.  2017-2019.  "A Formal Model of Linux-Kernel Memory
+	Ordering" (backup material for the LWN articles)
+	https://mirrors.edge.kernel.org/pub/linux/kernel/people/paulmck/LWNLinuxMM/
+
+
+Memory-model tooling
+====================
+
+o	Daniel Jackson. 2002. "Alloy: A Lightweight Object Modelling
+	Notation". ACM Trans. Softw. Eng. Methodol. 11, 2 (April 2002),
+	256–290. http://doi.acm.org/10.1145/505145.505149
+
+o	Jade Alglave, Luc Maranget, and Michael Tautschnig. 2014. "Herding
+	Cats: Modelling, Simulation, Testing, and Data Mining for Weak
+	Memory". ACM Trans. Program. Lang. Syst. 36, 2, Article 7 (July
+	2014), 7:1–7:74 pages.
+
+o	Jade Alglave, Patrick Cousot, and Luc Maranget. 2016. "Syntax and
+	semantics of the weak consistency model specification language
+	cat". CoRR abs/1608.07531 (2016). https://arxiv.org/abs/1608.07531
+
+
+Memory-model comparisons
+========================
+
+o	Paul E. McKenney, Ulrich Weigand, Andrea Parri, and Boqun
+	Feng. 2018. "Linux-Kernel Memory Model". (27 September 2018).
+	http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0124r6.html.
diff --git a/tools/memory-model/Documentation/simple.txt b/tools/memory-model/Documentation/simple.txt
new file mode 100644
index 000000000..4c789ec83
--- /dev/null
+++ b/tools/memory-model/Documentation/simple.txt
@@ -0,0 +1,270 @@
+This document provides options for those wishing to keep their
+memory-ordering lives simple, as is necessary for those whose domain
+is complex.  After all, there are bugs other than memory-ordering bugs,
+and the time spent gaining memory-ordering knowledge is not available
+for gaining domain knowledge.  Furthermore Linux-kernel memory model
+(LKMM) is quite complex, with subtle differences in code often having
+dramatic effects on correctness.
+
+The options near the beginning of this list are quite simple.  The idea
+is not that kernel hackers don't already know about them, but rather
+that they might need the occasional reminder.
+
+Please note that this is a generic guide, and that specific subsystems
+will often have special requirements or idioms.  For example, developers
+of MMIO-based device drivers will often need to use mb(), rmb(), and
+wmb(), and therefore might find smp_mb(), smp_rmb(), and smp_wmb()
+to be more natural than smp_load_acquire() and smp_store_release().
+On the other hand, those coming in from other environments will likely
+be more familiar with these last two.
+
+
+Single-threaded code
+====================
+
+In single-threaded code, there is no reordering, at least assuming
+that your toolchain and hardware are working correctly.  In addition,
+it is generally a mistake to assume your code will only run in a single
+threaded context as the kernel can enter the same code path on multiple
+CPUs at the same time.  One important exception is a function that makes
+no external data references.
+
+In the general case, you will need to take explicit steps to ensure that
+your code really is executed within a single thread that does not access
+shared variables.  A simple way to achieve this is to define a global lock
+that you acquire at the beginning of your code and release at the end,
+taking care to ensure that all references to your code's shared data are
+also carried out under that same lock.  Because only one thread can hold
+this lock at a given time, your code will be executed single-threaded.
+This approach is called "code locking".
+
+Code locking can severely limit both performance and scalability, so it
+should be used with caution, and only on code paths that execute rarely.
+After all, a huge amount of effort was required to remove the Linux
+kernel's old "Big Kernel Lock", so let's please be very careful about
+adding new "little kernel locks".
+
+One of the advantages of locking is that, in happy contrast with the
+year 1981, almost all kernel developers are very familiar with locking.
+The Linux kernel's lockdep (CONFIG_PROVE_LOCKING=y) is very helpful with
+the formerly feared deadlock scenarios.
+
+Please use the standard locking primitives provided by the kernel rather
+than rolling your own.  For one thing, the standard primitives interact
+properly with lockdep.  For another thing, these primitives have been
+tuned to deal better with high contention.  And for one final thing, it is
+surprisingly hard to correctly code production-quality lock acquisition
+and release functions.  After all, even simple non-production-quality
+locking functions must carefully prevent both the CPU and the compiler
+from moving code in either direction across the locking function.
+
+Despite the scalability limitations of single-threaded code, RCU
+takes this approach for much of its grace-period processing and also
+for early-boot operation.  The reason RCU is able to scale despite
+single-threaded grace-period processing is use of batching, where all
+updates that accumulated during one grace period are handled by the
+next one.  In other words, slowing down grace-period processing makes
+it more efficient.  Nor is RCU unique:  Similar batching optimizations
+are used in many I/O operations.
+
+
+Packaged code
+=============
+
+Even if performance and scalability concerns prevent your code from
+being completely single-threaded, it is often possible to use library
+functions that handle the concurrency nearly or entirely on their own.
+This approach delegates any LKMM worries to the library maintainer.
+
+In the kernel, what is the "library"?  Quite a bit.  It includes the
+contents of the lib/ directory, much of the include/linux/ directory along
+with a lot of other heavily used APIs.  But heavily used examples include
+the list macros (for example, include/linux/{,rcu}list.h), workqueues,
+smp_call_function(), and the various hash tables and search trees.
+
+
+Data locking
+============
+
+With code locking, we use single-threaded code execution to guarantee
+serialized access to the data that the code is accessing.  However,
+we can also achieve this by instead associating the lock with specific
+instances of the data structures.  This creates a "critical section"
+in the code execution that will execute as though it is single threaded.
+By placing all the accesses and modifications to a shared data structure
+inside a critical section, we ensure that the execution context that
+holds the lock has exclusive access to the shared data.
+
+The poster boy for this approach is the hash table, where placing a lock
+in each hash bucket allows operations on different buckets to proceed
+concurrently.  This works because the buckets do not overlap with each
+other, so that an operation on one bucket does not interfere with any
+other bucket.
+
+As the number of buckets increases, data locking scales naturally.
+In particular, if the amount of data increases with the number of CPUs,
+increasing the number of buckets as the number of CPUs increase results
+in a naturally scalable data structure.
+
+
+Per-CPU processing
+==================
+
+Partitioning processing and data over CPUs allows each CPU to take
+a single-threaded approach while providing excellent performance and
+scalability.  Of course, there is no free lunch:  The dark side of this
+excellence is substantially increased memory footprint.
+
+In addition, it is sometimes necessary to occasionally update some global
+view of this processing and data, in which case something like locking
+must be used to protect this global view.  This is the approach taken
+by the percpu_counter infrastructure. In many cases, there are already
+generic/library variants of commonly used per-cpu constructs available.
+Please use them rather than rolling your own.
+
+RCU uses DEFINE_PER_CPU*() declaration to create a number of per-CPU
+data sets.  For example, each CPU does private quiescent-state processing
+within its instance of the per-CPU rcu_data structure, and then uses data
+locking to report quiescent states up the grace-period combining tree.
+
+
+Packaged primitives: Sequence locking
+=====================================
+
+Lockless programming is considered by many to be more difficult than
+lock-based programming, but there are a few lockless design patterns that
+have been built out into an API.  One of these APIs is sequence locking.
+Although this APIs can be used in extremely complex ways, there are simple
+and effective ways of using it that avoid the need to pay attention to
+memory ordering.
+
+The basic keep-things-simple rule for sequence locking is "do not write
+in read-side code".  Yes, you can do writes from within sequence-locking
+readers, but it won't be so simple.  For example, such writes will be
+lockless and should be idempotent.
+
+For more sophisticated use cases, LKMM can guide you, including use
+cases involving combining sequence locking with other synchronization
+primitives.  (LKMM does not yet know about sequence locking, so it is
+currently necessary to open-code it in your litmus tests.)
+
+Additional information may be found in include/linux/seqlock.h.
+
+Packaged primitives: RCU
+========================
+
+Another lockless design pattern that has been baked into an API
+is RCU.  The Linux kernel makes sophisticated use of RCU, but the
+keep-things-simple rules for RCU are "do not write in read-side code"
+and "do not update anything that is visible to and accessed by readers",
+and "protect updates with locking".
+
+These rules are illustrated by the functions foo_update_a() and
+foo_get_a() shown in Documentation/RCU/whatisRCU.rst.  Additional
+RCU usage patterns maybe found in Documentation/RCU and in the
+source code.
+
+
+Packaged primitives: Atomic operations
+======================================
+
+Back in the day, the Linux kernel had three types of atomic operations:
+
+1.	Initialization and read-out, such as atomic_set() and atomic_read().
+
+2.	Operations that did not return a value and provided no ordering,
+	such as atomic_inc() and atomic_dec().
+
+3.	Operations that returned a value and provided full ordering, such as
+	atomic_add_return() and atomic_dec_and_test().  Note that some
+	value-returning operations provide full ordering only conditionally.
+	For example, cmpxchg() provides ordering only upon success.
+
+More recent kernels have operations that return a value but do not
+provide full ordering.  These are flagged with either a _relaxed()
+suffix (providing no ordering), or an _acquire() or _release() suffix
+(providing limited ordering).
+
+Additional information may be found in these files:
+
+Documentation/atomic_t.txt
+Documentation/atomic_bitops.txt
+Documentation/core-api/refcount-vs-atomic.rst
+
+Reading code using these primitives is often also quite helpful.
+
+
+Lockless, fully ordered
+=======================
+
+When using locking, there often comes a time when it is necessary
+to access some variable or another without holding the data lock
+that serializes access to that variable.
+
+If you want to keep things simple, use the initialization and read-out
+operations from the previous section only when there are no racing
+accesses.  Otherwise, use only fully ordered operations when accessing
+or modifying the variable.  This approach guarantees that code prior
+to a given access to that variable will be seen by all CPUs has having
+happened before any code following any later access to that same variable.
+
+Please note that per-CPU functions are not atomic operations and
+hence they do not provide any ordering guarantees at all.
+
+If the lockless accesses are frequently executed reads that are used
+only for heuristics, or if they are frequently executed writes that
+are used only for statistics, please see the next section.
+
+
+Lockless statistics and heuristics
+==================================
+
+Unordered primitives such as atomic_read(), atomic_set(), READ_ONCE(), and
+WRITE_ONCE() can safely be used in some cases.  These primitives provide
+no ordering, but they do prevent the compiler from carrying out a number
+of destructive optimizations (for which please see the next section).
+One example use for these primitives is statistics, such as per-CPU
+counters exemplified by the rt_cache_stat structure's routing-cache
+statistics counters.  Another example use case is heuristics, such as
+the jiffies_till_first_fqs and jiffies_till_next_fqs kernel parameters
+controlling how often RCU scans for idle CPUs.
+
+But be careful.  "Unordered" really does mean "unordered".  It is all
+too easy to assume ordering, and this assumption must be avoided when
+using these primitives.
+
+
+Don't let the compiler trip you up
+==================================
+
+It can be quite tempting to use plain C-language accesses for lockless
+loads from and stores to shared variables.  Although this is both
+possible and quite common in the Linux kernel, it does require a
+surprising amount of analysis, care, and knowledge about the compiler.
+Yes, some decades ago it was not unfair to consider a C compiler to be
+an assembler with added syntax and better portability, but the advent of
+sophisticated optimizing compilers mean that those days are long gone.
+Today's optimizing compilers can profoundly rewrite your code during the
+translation process, and have long been ready, willing, and able to do so.
+
+Therefore, if you really need to use C-language assignments instead of
+READ_ONCE(), WRITE_ONCE(), and so on, you will need to have a very good
+understanding of both the C standard and your compiler.  Here are some
+introductory references and some tooling to start you on this noble quest:
+
+Who's afraid of a big bad optimizing compiler?
+	https://lwn.net/Articles/793253/
+Calibrating your fear of big bad optimizing compilers
+	https://lwn.net/Articles/799218/
+Concurrency bugs should fear the big bad data-race detector (part 1)
+	https://lwn.net/Articles/816850/
+Concurrency bugs should fear the big bad data-race detector (part 2)
+	https://lwn.net/Articles/816854/
+
+
+More complex use cases
+======================
+
+If the alternatives above do not do what you need, please look at the
+recipes-pairs.txt file to peel off the next layer of the memory-ordering
+onion.