Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 755 insertions, 0 deletions

diff --git a/tools/perf/Documentation/perf-config.txt b/tools/perf/Documentation/perf-config.txt
new file mode 100644
index 000000000..39c890ead
--- /dev/null
+++ b/tools/perf/Documentation/perf-config.txt
@@ -0,0 +1,755 @@
+perf-config(1)
+==============
+
+NAME
+----
+perf-config - Get and set variables in a configuration file.
+
+SYNOPSIS
+--------
+[verse]
+'perf config' [<file-option>] [section.name[=value] ...]
+or
+'perf config' [<file-option>] -l | --list
+
+DESCRIPTION
+-----------
+You can manage variables in a configuration file with this command.
+
+OPTIONS
+-------
+
+-l::
+--list::
+	Show current config variables, name and value, for all sections.
+
+--user::
+	For writing and reading options: write to user
+	'$HOME/.perfconfig' file or read it.
+
+--system::
+	For writing and reading options: write to system-wide
+	'$(sysconfdir)/perfconfig' or read it.
+
+CONFIGURATION FILE
+------------------
+
+The perf configuration file contains many variables to change various
+aspects of each of its tools, including output, disk usage, etc.
+The '$HOME/.perfconfig' file is used to store a per-user configuration.
+The file '$(sysconfdir)/perfconfig' can be used to
+store a system-wide default configuration.
+
+One an disable reading config files by setting the PERF_CONFIG environment
+variable to /dev/null, or provide an alternate config file by setting that
+variable.
+
+When reading or writing, the values are read from the system and user
+configuration files by default, and options '--system' and '--user'
+can be used to tell the command to read from or write to only that location.
+
+Syntax
+~~~~~~
+
+The file consist of sections. A section starts with its name
+surrounded by square brackets and continues till the next section
+begins. Each variable must be in a section, and have the form
+'name = value', for example:
+
+	[section]
+		name1 = value1
+		name2 = value2
+
+Section names are case sensitive and can contain any characters except
+newline (double quote `"` and backslash have to be escaped as `\"` and `\\`,
+respectively). Section headers can't span multiple lines.
+
+Example
+~~~~~~~
+
+Given a $HOME/.perfconfig like this:
+
+#
+# This is the config file, and
+# a '#' and ';' character indicates a comment
+#
+
+	[colors]
+		# Color variables
+		top = red, default
+		medium = green, default
+		normal = lightgray, default
+		selected = white, lightgray
+		jump_arrows = blue, default
+		addr = magenta, default
+		root = white, blue
+
+	[tui]
+		# Defaults if linked with libslang
+		report = on
+		annotate = on
+		top = on
+
+	[buildid]
+		# Default, disable using /dev/null
+		dir = ~/.debug
+
+	[annotate]
+		# Defaults
+		hide_src_code = false
+		use_offset = true
+		jump_arrows = true
+		show_nr_jumps = false
+
+	[help]
+		# Format can be man, info, web or html
+		format = man
+		autocorrect = 0
+
+	[ui]
+		show-headers = true
+
+	[call-graph]
+		# fp (framepointer), dwarf
+		record-mode = fp
+		print-type = graph
+		order = caller
+		sort-key = function
+
+	[report]
+		# Defaults
+		sort_order = comm,dso,symbol
+		percent-limit = 0
+		queue-size = 0
+		children = true
+		group = true
+		skip-empty = true
+
+	[llvm]
+		dump-obj = true
+		clang-opt = -g
+
+You can hide source code of annotate feature setting the config to false with
+
+	% perf config annotate.hide_src_code=true
+
+If you want to add or modify several config items, you can do like
+
+	% perf config ui.show-headers=false kmem.default=slab
+
+To modify the sort order of report functionality in user config file(i.e. `~/.perfconfig`), do
+
+	% perf config --user report.sort-order=srcline
+
+To change colors of selected line to other foreground and background colors
+in system config file (i.e. `$(sysconf)/perfconfig`), do
+
+	% perf config --system colors.selected=yellow,green
+
+To query the record mode of call graph, do
+
+	% perf config call-graph.record-mode
+
+If you want to know multiple config key/value pairs, you can do like
+
+	% perf config report.queue-size call-graph.order report.children
+
+To query the config value of sort order of call graph in user config file (i.e. `~/.perfconfig`), do
+
+	% perf config --user call-graph.sort-order
+
+To query the config value of buildid directory in system config file (i.e. `$(sysconf)/perfconfig`), do
+
+	% perf config --system buildid.dir
+
+Variables
+~~~~~~~~~
+
+colors.*::
+	The variables for customizing the colors used in the output for the
+	'report', 'top' and 'annotate' in the TUI. They should specify the
+	foreground and background colors, separated by a comma, for example:
+
+		medium = green, lightgray
+
+	If you want to use the color configured for you terminal, just leave it
+	as 'default', for example:
+
+		medium = default, lightgray
+
+	Available colors:
+	red, yellow, green, cyan, gray, black, blue,
+	white, default, magenta, lightgray
+
+	colors.top::
+		'top' means a overhead percentage which is more than 5%.
+		And values of this variable specify percentage colors.
+		Basic key values are foreground-color 'red' and
+		background-color 'default'.
+	colors.medium::
+		'medium' means a overhead percentage which has more than 0.5%.
+		Default values are 'green' and 'default'.
+	colors.normal::
+		'normal' means the rest of overhead percentages
+		except 'top', 'medium', 'selected'.
+		Default values are 'lightgray' and 'default'.
+	colors.selected::
+		This selects the colors for the current entry in a list of entries
+		from sub-commands (top, report, annotate).
+		Default values are 'black' and 'lightgray'.
+	colors.jump_arrows::
+		Colors for jump arrows on assembly code listings
+		such as 'jns', 'jmp', 'jane', etc.
+		Default values are 'blue', 'default'.
+	colors.addr::
+		This selects colors for addresses from 'annotate'.
+		Default values are 'magenta', 'default'.
+	colors.root::
+		Colors for headers in the output of a sub-commands (top, report).
+		Default values are 'white', 'blue'.
+
+core.*::
+	core.proc-map-timeout::
+		Sets a timeout (in milliseconds) for parsing /proc/<pid>/maps files.
+		Can be overridden by the --proc-map-timeout option on supported
+		subcommands. The default timeout is 500ms.
+
+tui.*, gtk.*::
+	Subcommands that can be configured here are 'top', 'report' and 'annotate'.
+	These values are booleans, for example:
+
+	[tui]
+		top = true
+
+	will make the TUI be the default for the 'top' subcommand. Those will be
+	available if the required libs were detected at tool build time.
+
+buildid.*::
+	buildid.dir::
+		Each executable and shared library in modern distributions comes with a
+		content based identifier that, if available, will be inserted in a
+		'perf.data' file header to, at analysis time find what is needed to do
+		symbol resolution, code annotation, etc.
+
+		The recording tools also stores a hard link or copy in a per-user
+		directory, $HOME/.debug/, of binaries, shared libraries, /proc/kallsyms
+		and /proc/kcore files to be used at analysis time.
+
+		The buildid.dir variable can be used to either change this directory
+		cache location, or to disable it altogether. If you want to disable it,
+		set buildid.dir to /dev/null. The default is $HOME/.debug
+
+buildid-cache.*::
+	buildid-cache.debuginfod=URLs
+		Specify debuginfod URLs to be used when retrieving perf.data binaries,
+		it follows the same syntax as the DEBUGINFOD_URLS variable, like:
+
+		  buildid-cache.debuginfod=http://192.168.122.174:8002
+
+annotate.*::
+	These are in control of addresses, jump function, source code
+	in lines of assembly code from a specific program.
+
+	annotate.disassembler_style:
+		Use this to change the default disassembler style to some other value
+		supported by binutils, such as "intel", see the '-M' option help in the
+		'objdump' man page.
+
+	annotate.hide_src_code::
+		If a program which is analyzed has source code,
+		this option lets 'annotate' print a list of assembly code with the source code.
+		For example, let's see a part of a program. There're four lines.
+		If this option is 'true', they can be printed
+		without source code from a program as below.
+
+		│        push   %rbp
+		│        mov    %rsp,%rbp
+		│        sub    $0x10,%rsp
+		│        mov    (%rdi),%rdx
+
+		But if this option is 'false', source code of the part
+		can be also printed as below. Default is 'false'.
+
+		│      struct rb_node *rb_next(const struct rb_node *node)
+		│      {
+		│        push   %rbp
+		│        mov    %rsp,%rbp
+		│        sub    $0x10,%rsp
+		│              struct rb_node *parent;
+		│
+		│              if (RB_EMPTY_NODE(node))
+		│        mov    (%rdi),%rdx
+		│              return n;
+
+		This option works with tui, stdio2 browsers.
+
+        annotate.use_offset::
+		Basing on a first address of a loaded function, offset can be used.
+		Instead of using original addresses of assembly code,
+		addresses subtracted from a base address can be printed.
+		Let's illustrate an example.
+		If a base address is 0XFFFFFFFF81624d50 as below,
+
+		ffffffff81624d50 <load0>
+
+		an address on assembly code has a specific absolute address as below
+
+		ffffffff816250b8:│  mov    0x8(%r14),%rdi
+
+		but if use_offset is 'true', an address subtracted from a base address is printed.
+		Default is true. This option is only applied to TUI.
+
+		             368:│  mov    0x8(%r14),%rdi
+
+		This option works with tui, stdio2 browsers.
+
+	annotate.jump_arrows::
+		There can be jump instruction among assembly code.
+		Depending on a boolean value of jump_arrows,
+		arrows can be printed or not which represent
+		where do the instruction jump into as below.
+
+		│     ┌──jmp    1333
+		│     │  xchg   %ax,%ax
+		│1330:│  mov    %r15,%r10
+		│1333:└─→cmp    %r15,%r14
+
+		If jump_arrow is 'false', the arrows isn't printed as below.
+		Default is 'false'.
+
+		│      ↓ jmp    1333
+		│        xchg   %ax,%ax
+		│1330:   mov    %r15,%r10
+		│1333:   cmp    %r15,%r14
+
+		This option works with tui browser.
+
+        annotate.show_linenr::
+		When showing source code if this option is 'true',
+		line numbers are printed as below.
+
+		│1628         if (type & PERF_SAMPLE_IDENTIFIER) {
+		│     ↓ jne    508
+		│1628                 data->id = *array;
+		│1629                 array++;
+		│1630         }
+
+		However if this option is 'false', they aren't printed as below.
+		Default is 'false'.
+
+		│             if (type & PERF_SAMPLE_IDENTIFIER) {
+		│     ↓ jne    508
+		│                     data->id = *array;
+		│                     array++;
+		│             }
+
+		This option works with tui, stdio2 browsers.
+
+        annotate.show_nr_jumps::
+		Let's see a part of assembly code.
+
+		│1382:   movb   $0x1,-0x270(%rbp)
+
+		If use this, the number of branches jumping to that address can be printed as below.
+		Default is 'false'.
+
+		│1 1382:   movb   $0x1,-0x270(%rbp)
+
+		This option works with tui, stdio2 browsers.
+
+        annotate.show_total_period::
+		To compare two records on an instruction base, with this option
+		provided, display total number of samples that belong to a line
+		in assembly code. If this option is 'true', total periods are printed
+		instead of percent values as below.
+
+		  302 │      mov    %eax,%eax
+
+		But if this option is 'false', percent values for overhead are printed i.e.
+		Default is 'false'.
+
+		99.93 │      mov    %eax,%eax
+
+		This option works with tui, stdio2, stdio browsers.
+
+	annotate.show_nr_samples::
+		By default perf annotate shows percentage of samples. This option
+		can be used to print absolute number of samples. Ex, when set as
+		false:
+
+		Percent│
+		 74.03 │      mov    %fs:0x28,%rax
+
+		When set as true:
+
+		Samples│
+		     6 │      mov    %fs:0x28,%rax
+
+		This option works with tui, stdio2, stdio browsers.
+
+	annotate.offset_level::
+		Default is '1', meaning just jump targets will have offsets show right beside
+		the instruction. When set to '2' 'call' instructions will also have its offsets
+		shown, 3 or higher will show offsets for all instructions.
+
+		This option works with tui, stdio2 browsers.
+
+	annotate.demangle::
+		Demangle symbol names to human readable form. Default is 'true'.
+
+	annotate.demangle_kernel::
+		Demangle kernel symbol names to human readable form. Default is 'true'.
+
+hist.*::
+	hist.percentage::
+		This option control the way to calculate overhead of filtered entries -
+		that means the value of this option is effective only if there's a
+		filter (by comm, dso or symbol name). Suppose a following example:
+
+		       Overhead  Symbols
+		       ........  .......
+		        33.33%     foo
+		        33.33%     bar
+		        33.33%     baz
+
+	       This is an original overhead and we'll filter out the first 'foo'
+	       entry. The value of 'relative' would increase the overhead of 'bar'
+	       and 'baz' to 50.00% for each, while 'absolute' would show their
+	       current overhead (33.33%).
+
+ui.*::
+	ui.show-headers::
+		This option controls display of column headers (like 'Overhead' and 'Symbol')
+		in 'report' and 'top'. If this option is false, they are hidden.
+		This option is only applied to TUI.
+
+call-graph.*::
+	The following controls the handling of call-graphs (obtained via the
+	-g/--call-graph options).
+
+	call-graph.record-mode::
+		The mode for user space can be 'fp' (frame pointer), 'dwarf'
+		and 'lbr'.  The value 'dwarf' is effective only if libunwind
+		(or a recent version of libdw) is present on the system;
+		the value 'lbr' only works for certain cpus. The method for
+		kernel space is controlled not by this option but by the
+		kernel config (CONFIG_UNWINDER_*).
+
+	call-graph.dump-size::
+		The size of stack to dump in order to do post-unwinding. Default is 8192 (byte).
+		When using dwarf into record-mode, the default size will be used if omitted.
+
+	call-graph.print-type::
+		The print-types can be graph (graph absolute), fractal (graph relative),
+		flat and folded. This option controls a way to show overhead for each callchain
+		entry. Suppose a following example.
+
+                Overhead  Symbols
+                ........  .......
+                  40.00%  foo
+                          |
+                          ---foo
+                             |
+                             |--50.00%--bar
+                             |          main
+                             |
+                              --50.00%--baz
+                                        main
+
+		This output is a 'fractal' format. The 'foo' came from 'bar' and 'baz' exactly
+		half and half so 'fractal' shows 50.00% for each
+		(meaning that it assumes 100% total overhead of 'foo').
+
+		The 'graph' uses absolute overhead value of 'foo' as total so each of
+		'bar' and 'baz' callchain will have 20.00% of overhead.
+		If 'flat' is used, single column and linear exposure of call chains.
+		'folded' mean call chains are displayed in a line, separated by semicolons.
+
+	call-graph.order::
+		This option controls print order of callchains. The default is
+		'callee' which means callee is printed at top and then followed by its
+		caller and so on. The 'caller' prints it in reverse order.
+
+		If this option is not set and report.children or top.children is
+		set to true (or the equivalent command line option is given),
+		the default value of this option is changed to 'caller' for the
+		execution of 'perf report' or 'perf top'. Other commands will
+		still default to 'callee'.
+
+	call-graph.sort-key::
+		The callchains are merged if they contain same information.
+		The sort-key option determines a way to compare the callchains.
+		A value of 'sort-key' can be 'function' or 'address'.
+		The default is 'function'.
+
+	call-graph.threshold::
+		When there're many callchains it'd print tons of lines. So perf omits
+		small callchains under a certain overhead (threshold) and this option
+		control the threshold. Default is 0.5 (%). The overhead is calculated
+		by value depends on call-graph.print-type.
+
+	call-graph.print-limit::
+		This is a maximum number of lines of callchain printed for a single
+		histogram entry. Default is 0 which means no limitation.
+
+report.*::
+	report.sort_order::
+		Allows changing the default sort order from "comm,dso,symbol" to
+		some other default, for instance "sym,dso" may be more fitting for
+		kernel developers.
+	report.percent-limit::
+		This one is mostly the same as call-graph.threshold but works for
+		histogram entries. Entries having an overhead lower than this
+		percentage will not be printed. Default is '0'. If percent-limit
+		is '10', only entries which have more than 10% of overhead will be
+		printed.
+
+	report.queue-size::
+		This option sets up the maximum allocation size of the internal
+		event queue for ordering events. Default is 0, meaning no limit.
+
+	report.children::
+		'Children' means functions called from another function.
+		If this option is true, 'perf report' cumulates callchains of children
+		and show (accumulated) total overhead as well as 'Self' overhead.
+		Please refer to the 'perf report' manual. The default is 'true'.
+
+	report.group::
+		This option is to show event group information together.
+		Example output with this turned on, notice that there is one column
+		per event in the group, ref-cycles and cycles:
+
+		# group: {ref-cycles,cycles}
+		# ========
+		#
+		# Samples: 7K of event 'anon group { ref-cycles, cycles }'
+		# Event count (approx.): 6876107743
+		#
+		#         Overhead  Command      Shared Object               Symbol
+		# ................  .......  .................  ...................
+		#
+		    99.84%  99.76%  noploop  noploop            [.] main
+		     0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
+		     0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
+
+	report.skip-empty::
+		This option can change default stat behavior with empty results.
+		If it's set true, 'perf report --stat' will not show 0 stats.
+
+top.*::
+	top.children::
+		Same as 'report.children'. So if it is enabled, the output of 'top'
+		command will have 'Children' overhead column as well as 'Self' overhead
+		column by default.
+		The default is 'true'.
+
+	top.call-graph::
+		This is identical to 'call-graph.record-mode', except it is
+		applicable only for 'top' subcommand. This option ONLY setup
+		the unwind method. To enable 'perf top' to actually use it,
+		the command line option -g must be specified.
+
+man.*::
+	man.viewer::
+		This option can assign a tool to view manual pages when 'help'
+		subcommand was invoked. Supported tools are 'man', 'woman'
+		(with emacs client) and 'konqueror'. Default is 'man'.
+
+		New man viewer tool can be also added using 'man.<tool>.cmd'
+		or use different path using 'man.<tool>.path' config option.
+
+pager.*::
+	pager.<subcommand>::
+		When the subcommand is run on stdio, determine whether it uses
+		pager or not based on this value. Default is 'unspecified'.
+
+kmem.*::
+	kmem.default::
+		This option decides which allocator is to be analyzed if neither
+		'--slab' nor '--page' option is used. Default is 'slab'.
+
+record.*::
+	record.build-id::
+		This option can be 'cache', 'no-cache', 'skip' or 'mmap'.
+		'cache' is to post-process data and save/update the binaries into
+		the build-id cache (in ~/.debug). This is the default.
+		But if this option is 'no-cache', it will not update the build-id cache.
+		'skip' skips post-processing and does not update the cache.
+		'mmap' skips post-processing and reads build-ids from MMAP events.
+
+	record.call-graph::
+		This is identical to 'call-graph.record-mode', except it is
+		applicable only for 'record' subcommand. This option ONLY setup
+		the unwind method. To enable 'perf record' to actually use it,
+		the command line option -g must be specified.
+
+	record.aio::
+		Use 'n' control blocks in asynchronous (Posix AIO) trace writing
+		mode ('n' default: 1, max: 4).
+
+	record.debuginfod::
+		Specify debuginfod URL to be used when cacheing perf.data binaries,
+		it follows the same syntax as the DEBUGINFOD_URLS variable, like:
+
+		  http://192.168.122.174:8002
+
+		If the URLs is 'system', the value of DEBUGINFOD_URLS system environment
+		variable is used.
+
+diff.*::
+	diff.order::
+		This option sets the number of columns to sort the result.
+		The default is 0, which means sorting by baseline.
+		Setting it to 1 will sort the result by delta (or other
+		compute method selected).
+
+	diff.compute::
+		This options sets the method for computing the diff result.
+		Possible values are 'delta', 'delta-abs', 'ratio' and
+		'wdiff'.  Default is 'delta'.
+
+trace.*::
+	trace.add_events::
+		Allows adding a set of events to add to the ones specified
+		by the user, or use as a default one if none was specified.
+		The initial use case is to add augmented_raw_syscalls.o to
+		activate the 'perf trace' logic that looks for syscall
+		pointer contents after the normal tracepoint payload.
+
+	trace.args_alignment::
+		Number of columns to align the argument list, default is 70,
+		use 40 for the strace default, zero to no alignment.
+
+	trace.no_inherit::
+		Do not follow children threads.
+
+	trace.show_arg_names::
+		Should syscall argument names be printed? If not then trace.show_zeros
+		will be set.
+
+	trace.show_duration::
+		Show syscall duration.
+
+	trace.show_prefix::
+		If set to 'yes' will show common string prefixes in tables. The default
+		is to remove the common prefix in things like "MAP_SHARED", showing just "SHARED".
+
+	trace.show_timestamp::
+		Show syscall start timestamp.
+
+	trace.show_zeros::
+		Do not suppress syscall arguments that are equal to zero.
+
+	trace.tracepoint_beautifiers::
+		Use "libtraceevent" to use that library to augment the tracepoint arguments,
+		"libbeauty", the default, to use the same argument beautifiers used in the
+		strace-like sys_enter+sys_exit lines.
+
+ftrace.*::
+	ftrace.tracer::
+		Can be used to select the default tracer when neither -G nor
+		-F option is not specified. Possible values are 'function' and
+		'function_graph'.
+
+llvm.*::
+	llvm.clang-path::
+		Path to clang. If omit, search it from $PATH.
+
+	llvm.clang-bpf-cmd-template::
+		Cmdline template. Below lines show its default value. Environment
+		variable is used to pass options.
+		"$CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS "\
+		"-DLINUX_VERSION_CODE=$LINUX_VERSION_CODE "	\
+		"$CLANG_OPTIONS $PERF_BPF_INC_OPTIONS $KERNEL_INC_OPTIONS " \
+		"-Wno-unused-value -Wno-pointer-sign "		\
+		"-working-directory $WORKING_DIR "		\
+		"-c \"$CLANG_SOURCE\" -target bpf $CLANG_EMIT_LLVM -O2 -o - $LLVM_OPTIONS_PIPE"
+
+	llvm.clang-opt::
+		Options passed to clang.
+
+	llvm.kbuild-dir::
+		kbuild directory. If not set, use /lib/modules/`uname -r`/build.
+		If set to "" deliberately, skip kernel header auto-detector.
+
+	llvm.kbuild-opts::
+		Options passed to 'make' when detecting kernel header options.
+
+	llvm.dump-obj::
+		Enable perf dump BPF object files compiled by LLVM.
+
+	llvm.opts::
+		Options passed to llc.
+
+samples.*::
+
+	samples.context::
+		Define how many ns worth of time to show
+		around samples in perf report sample context browser.
+
+scripts.*::
+
+	Any option defines a script that is added to the scripts menu
+	in the interactive perf browser and whose output is displayed.
+	The name of the option is the name, the value is a script command line.
+	The script gets the same options passed as a full perf script,
+	in particular -i perfdata file, --cpu, --tid
+
+convert.*::
+
+	convert.queue-size::
+		Limit the size of ordered_events queue, so we could control
+		allocation size of perf data files without proper finished
+		round events.
+stat.*::
+
+	stat.big-num::
+		(boolean) Change the default for "--big-num". To make
+		"--no-big-num" the default, set "stat.big-num=false".
+
+intel-pt.*::
+
+	intel-pt.cache-divisor::
+
+	intel-pt.mispred-all::
+		If set, Intel PT decoder will set the mispred flag on all
+		branches.
+
+	intel-pt.max-loops::
+		If set and non-zero, the maximum number of unconditional
+		branches decoded without consuming any trace packets. If
+		the maximum is exceeded there will be a "Never-ending loop"
+		error. The default is 100000.
+
+auxtrace.*::
+
+	auxtrace.dumpdir::
+		s390 only. The directory to save the auxiliary trace buffer
+		can be changed using this option. Ex, auxtrace.dumpdir=/tmp.
+		If the directory does not exist or has the wrong file type,
+		the current directory is used.
+
+itrace.*::
+
+	debug-log-buffer-size::
+		Log size in bytes to output when using the option --itrace=d+e
+		Refer 'itrace' option of linkperf:perf-script[1] or
+		linkperf:perf-report[1]. The default is 16384.
+
+daemon.*::
+
+	daemon.base::
+		Base path for daemon data. All sessions data are stored under
+		this path.
+
+session-<NAME>.*::
+
+	session-<NAME>.run::
+
+		Defines new record session for daemon. The value is record's
+		command line without the 'record' keyword.
+
+
+SEE ALSO
+--------
+linkperf:perf[1]