Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 679 insertions, 0 deletions

diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt
new file mode 100644
index 000000000..cf4b7f4b6
--- /dev/null
+++ b/tools/perf/Documentation/perf-script-python.txt
@@ -0,0 +1,679 @@
+perf-script-python(1)
+====================
+
+NAME
+----
+perf-script-python - Process trace data with a Python script
+
+SYNOPSIS
+--------
+[verse]
+'perf script' [-s [Python]:script[.py] ]
+
+DESCRIPTION
+-----------
+
+This perf script option is used to process perf script data using perf's
+built-in Python interpreter.  It reads and processes the input file and
+displays the results of the trace analysis implemented in the given
+Python script, if any.
+
+A QUICK EXAMPLE
+---------------
+
+This section shows the process, start to finish, of creating a working
+Python script that aggregates and extracts useful information from a
+raw perf script stream.  You can avoid reading the rest of this
+document if an example is enough for you; the rest of the document
+provides more details on each step and lists the library functions
+available to script writers.
+
+This example actually details the steps that were used to create the
+'syscall-counts' script you see when you list the available perf script
+scripts via 'perf script -l'.  As such, this script also shows how to
+integrate your script into the list of general-purpose 'perf script'
+scripts listed by that command.
+
+The syscall-counts script is a simple script, but demonstrates all the
+basic ideas necessary to create a useful script.  Here's an example
+of its output (syscall names are not yet supported, they will appear
+as numbers):
+
+----
+syscall events:
+
+event                                          count
+----------------------------------------  -----------
+sys_write                                     455067
+sys_getdents                                    4072
+sys_close                                       3037
+sys_swapoff                                     1769
+sys_read                                         923
+sys_sched_setparam                               826
+sys_open                                         331
+sys_newfstat                                     326
+sys_mmap                                         217
+sys_munmap                                       216
+sys_futex                                        141
+sys_select                                       102
+sys_poll                                          84
+sys_setitimer                                     12
+sys_writev                                         8
+15                                                 8
+sys_lseek                                          7
+sys_rt_sigprocmask                                 6
+sys_wait4                                          3
+sys_ioctl                                          3
+sys_set_robust_list                                1
+sys_exit                                           1
+56                                                 1
+sys_access                                         1
+----
+
+Basically our task is to keep a per-syscall tally that gets updated
+every time a system call occurs in the system.  Our script will do
+that, but first we need to record the data that will be processed by
+that script.  Theoretically, there are a couple of ways we could do
+that:
+
+- we could enable every event under the tracing/events/syscalls
+  directory, but this is over 600 syscalls, well beyond the number
+  allowable by perf.  These individual syscall events will however be
+  useful if we want to later use the guidance we get from the
+  general-purpose scripts to drill down and get more detail about
+  individual syscalls of interest.
+
+- we can enable the sys_enter and/or sys_exit syscalls found under
+  tracing/events/raw_syscalls.  These are called for all syscalls; the
+  'id' field can be used to distinguish between individual syscall
+  numbers.
+
+For this script, we only need to know that a syscall was entered; we
+don't care how it exited, so we'll use 'perf record' to record only
+the sys_enter events:
+
+----
+# perf record -a -e raw_syscalls:sys_enter
+
+^C[ perf record: Woken up 1 times to write data ]
+[ perf record: Captured and wrote 56.545 MB perf.data (~2470503 samples) ]
+----
+
+The options basically say to collect data for every syscall event
+system-wide and multiplex the per-cpu output into a single stream.
+That single stream will be recorded in a file in the current directory
+called perf.data.
+
+Once we have a perf.data file containing our data, we can use the -g
+'perf script' option to generate a Python script that will contain a
+callback handler for each event type found in the perf.data trace
+stream (for more details, see the STARTER SCRIPTS section).
+
+----
+# perf script -g python
+generated Python script: perf-script.py
+
+The output file created also in the current directory is named
+perf-script.py.  Here's the file in its entirety:
+
+# perf script event handlers, generated by perf script -g python
+# Licensed under the terms of the GNU GPL License version 2
+
+# The common_* event handler fields are the most useful fields common to
+# all events.  They don't necessarily correspond to the 'common_*' fields
+# in the format files.  Those fields not available as handler params can
+# be retrieved using Python functions of the form common_*(context).
+# See the perf-script-python Documentation for the list of available functions.
+
+import os
+import sys
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+from perf_trace_context import *
+from Core import *
+
+def trace_begin():
+	print "in trace_begin"
+
+def trace_end():
+	print "in trace_end"
+
+def raw_syscalls__sys_enter(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	id, args):
+		print_header(event_name, common_cpu, common_secs, common_nsecs,
+			common_pid, common_comm)
+
+		print "id=%d, args=%s\n" % \
+		(id, args),
+
+def trace_unhandled(event_name, context, event_fields_dict):
+		print ' '.join(['%s=%s'%(k,str(v))for k,v in sorted(event_fields_dict.items())])
+
+def print_header(event_name, cpu, secs, nsecs, pid, comm):
+	print "%-20s %5u %05u.%09u %8u %-20s " % \
+	(event_name, cpu, secs, nsecs, pid, comm),
+----
+
+At the top is a comment block followed by some import statements and a
+path append which every perf script script should include.
+
+Following that are a couple generated functions, trace_begin() and
+trace_end(), which are called at the beginning and the end of the
+script respectively (for more details, see the SCRIPT_LAYOUT section
+below).
+
+Following those are the 'event handler' functions generated one for
+every event in the 'perf record' output.  The handler functions take
+the form subsystem\__event_name, and contain named parameters, one for
+each field in the event; in this case, there's only one event,
+raw_syscalls__sys_enter().  (see the EVENT HANDLERS section below for
+more info on event handlers).
+
+The final couple of functions are, like the begin and end functions,
+generated for every script.  The first, trace_unhandled(), is called
+every time the script finds an event in the perf.data file that
+doesn't correspond to any event handler in the script.  This could
+mean either that the record step recorded event types that it wasn't
+really interested in, or the script was run against a trace file that
+doesn't correspond to the script.
+
+The script generated by -g option simply prints a line for each
+event found in the trace stream i.e. it basically just dumps the event
+and its parameter values to stdout.  The print_header() function is
+simply a utility function used for that purpose.  Let's rename the
+script and run it to see the default output:
+
+----
+# mv perf-script.py syscall-counts.py
+# perf script -s syscall-counts.py
+
+raw_syscalls__sys_enter     1 00840.847582083     7506 perf                  id=1, args=
+raw_syscalls__sys_enter     1 00840.847595764     7506 perf                  id=1, args=
+raw_syscalls__sys_enter     1 00840.847620860     7506 perf                  id=1, args=
+raw_syscalls__sys_enter     1 00840.847710478     6533 npviewer.bin          id=78, args=
+raw_syscalls__sys_enter     1 00840.847719204     6533 npviewer.bin          id=142, args=
+raw_syscalls__sys_enter     1 00840.847755445     6533 npviewer.bin          id=3, args=
+raw_syscalls__sys_enter     1 00840.847775601     6533 npviewer.bin          id=3, args=
+raw_syscalls__sys_enter     1 00840.847781820     6533 npviewer.bin          id=3, args=
+.
+.
+.
+----
+
+Of course, for this script, we're not interested in printing every
+trace event, but rather aggregating it in a useful way.  So we'll get
+rid of everything to do with printing as well as the trace_begin() and
+trace_unhandled() functions, which we won't be using.  That leaves us
+with this minimalistic skeleton:
+
+----
+import os
+import sys
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+from perf_trace_context import *
+from Core import *
+
+def trace_end():
+	print "in trace_end"
+
+def raw_syscalls__sys_enter(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	id, args):
+----
+
+In trace_end(), we'll simply print the results, but first we need to
+generate some results to print.  To do that we need to have our
+sys_enter() handler do the necessary tallying until all events have
+been counted.  A hash table indexed by syscall id is a good way to
+store that information; every time the sys_enter() handler is called,
+we simply increment a count associated with that hash entry indexed by
+that syscall id:
+
+----
+  syscalls = autodict()
+
+  try:
+    syscalls[id] += 1
+  except TypeError:
+    syscalls[id] = 1
+----
+
+The syscalls 'autodict' object is a special kind of Python dictionary
+(implemented in Core.py) that implements Perl's 'autovivifying' hashes
+in Python i.e. with autovivifying hashes, you can assign nested hash
+values without having to go to the trouble of creating intermediate
+levels if they don't exist e.g syscalls[comm][pid][id] = 1 will create
+the intermediate hash levels and finally assign the value 1 to the
+hash entry for 'id' (because the value being assigned isn't a hash
+object itself, the initial value is assigned in the TypeError
+exception.  Well, there may be a better way to do this in Python but
+that's what works for now).
+
+Putting that code into the raw_syscalls__sys_enter() handler, we
+effectively end up with a single-level dictionary keyed on syscall id
+and having the counts we've tallied as values.
+
+The print_syscall_totals() function iterates over the entries in the
+dictionary and displays a line for each entry containing the syscall
+name (the dictionary keys contain the syscall ids, which are passed to
+the Util function syscall_name(), which translates the raw syscall
+numbers to the corresponding syscall name strings).  The output is
+displayed after all the events in the trace have been processed, by
+calling the print_syscall_totals() function from the trace_end()
+handler called at the end of script processing.
+
+The final script producing the output shown above is shown in its
+entirety below (syscall_name() helper is not yet available, you can
+only deal with id's for now):
+
+----
+import os
+import sys
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+from perf_trace_context import *
+from Core import *
+from Util import *
+
+syscalls = autodict()
+
+def trace_end():
+	print_syscall_totals()
+
+def raw_syscalls__sys_enter(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	id, args):
+	try:
+		syscalls[id] += 1
+	except TypeError:
+		syscalls[id] = 1
+
+def print_syscall_totals():
+    if for_comm is not None:
+	    print "\nsyscall events for %s:\n\n" % (for_comm),
+    else:
+	    print "\nsyscall events:\n\n",
+
+    print "%-40s  %10s\n" % ("event", "count"),
+    print "%-40s  %10s\n" % ("----------------------------------------", \
+                                 "-----------"),
+
+    for id, val in sorted(syscalls.iteritems(), key = lambda(k, v): (v, k), \
+				  reverse = True):
+	    print "%-40s  %10d\n" % (syscall_name(id), val),
+----
+
+The script can be run just as before:
+
+  # perf script -s syscall-counts.py
+
+So those are the essential steps in writing and running a script.  The
+process can be generalized to any tracepoint or set of tracepoints
+you're interested in - basically find the tracepoint(s) you're
+interested in by looking at the list of available events shown by
+'perf list' and/or look in /sys/kernel/debug/tracing/events/ for
+detailed event and field info, record the corresponding trace data
+using 'perf record', passing it the list of interesting events,
+generate a skeleton script using 'perf script -g python' and modify the
+code to aggregate and display it for your particular needs.
+
+After you've done that you may end up with a general-purpose script
+that you want to keep around and have available for future use.  By
+writing a couple of very simple shell scripts and putting them in the
+right place, you can have your script listed alongside the other
+scripts listed by the 'perf script -l' command e.g.:
+
+----
+# perf script -l
+List of available trace scripts:
+  wakeup-latency                       system-wide min/max/avg wakeup latency
+  rw-by-file <comm>                    r/w activity for a program, by file
+  rw-by-pid                            system-wide r/w activity
+----
+
+A nice side effect of doing this is that you also then capture the
+probably lengthy 'perf record' command needed to record the events for
+the script.
+
+To have the script appear as a 'built-in' script, you write two simple
+scripts, one for recording and one for 'reporting'.
+
+The 'record' script is a shell script with the same base name as your
+script, but with -record appended.  The shell script should be put
+into the perf/scripts/python/bin directory in the kernel source tree.
+In that script, you write the 'perf record' command-line needed for
+your script:
+
+----
+# cat kernel-source/tools/perf/scripts/python/bin/syscall-counts-record
+
+#!/bin/bash
+perf record -a -e raw_syscalls:sys_enter
+----
+
+The 'report' script is also a shell script with the same base name as
+your script, but with -report appended.  It should also be located in
+the perf/scripts/python/bin directory.  In that script, you write the
+'perf script -s' command-line needed for running your script:
+
+----
+# cat kernel-source/tools/perf/scripts/python/bin/syscall-counts-report
+
+#!/bin/bash
+# description: system-wide syscall counts
+perf script -s ~/libexec/perf-core/scripts/python/syscall-counts.py
+----
+
+Note that the location of the Python script given in the shell script
+is in the libexec/perf-core/scripts/python directory - this is where
+the script will be copied by 'make install' when you install perf.
+For the installation to install your script there, your script needs
+to be located in the perf/scripts/python directory in the kernel
+source tree:
+
+----
+# ls -al kernel-source/tools/perf/scripts/python
+total 32
+drwxr-xr-x 4 trz trz 4096 2010-01-26 22:30 .
+drwxr-xr-x 4 trz trz 4096 2010-01-26 22:29 ..
+drwxr-xr-x 2 trz trz 4096 2010-01-26 22:29 bin
+-rw-r--r-- 1 trz trz 2548 2010-01-26 22:29 check-perf-script.py
+drwxr-xr-x 3 trz trz 4096 2010-01-26 22:49 Perf-Trace-Util
+-rw-r--r-- 1 trz trz 1462 2010-01-26 22:30 syscall-counts.py
+----
+
+Once you've done that (don't forget to do a new 'make install',
+otherwise your script won't show up at run-time), 'perf script -l'
+should show a new entry for your script:
+
+----
+# perf script -l
+List of available trace scripts:
+  wakeup-latency                       system-wide min/max/avg wakeup latency
+  rw-by-file <comm>                    r/w activity for a program, by file
+  rw-by-pid                            system-wide r/w activity
+  syscall-counts                       system-wide syscall counts
+----
+
+You can now perform the record step via 'perf script record':
+
+  # perf script record syscall-counts
+
+and display the output using 'perf script report':
+
+  # perf script report syscall-counts
+
+STARTER SCRIPTS
+---------------
+
+You can quickly get started writing a script for a particular set of
+trace data by generating a skeleton script using 'perf script -g
+python' in the same directory as an existing perf.data trace file.
+That will generate a starter script containing a handler for each of
+the event types in the trace file; it simply prints every available
+field for each event in the trace file.
+
+You can also look at the existing scripts in
+~/libexec/perf-core/scripts/python for typical examples showing how to
+do basic things like aggregate event data, print results, etc.  Also,
+the check-perf-script.py script, while not interesting for its results,
+attempts to exercise all of the main scripting features.
+
+EVENT HANDLERS
+--------------
+
+When perf script is invoked using a trace script, a user-defined
+'handler function' is called for each event in the trace.  If there's
+no handler function defined for a given event type, the event is
+ignored (or passed to a 'trace_unhandled' function, see below) and the
+next event is processed.
+
+Most of the event's field values are passed as arguments to the
+handler function; some of the less common ones aren't - those are
+available as calls back into the perf executable (see below).
+
+As an example, the following perf record command can be used to record
+all sched_wakeup events in the system:
+
+ # perf record -a -e sched:sched_wakeup
+
+Traces meant to be processed using a script should be recorded with
+the above option: -a to enable system-wide collection.
+
+The format file for the sched_wakeup event defines the following fields
+(see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format):
+
+----
+ format:
+        field:unsigned short common_type;
+        field:unsigned char common_flags;
+        field:unsigned char common_preempt_count;
+        field:int common_pid;
+
+        field:char comm[TASK_COMM_LEN];
+        field:pid_t pid;
+        field:int prio;
+        field:int success;
+        field:int target_cpu;
+----
+
+The handler function for this event would be defined as:
+
+----
+def sched__sched_wakeup(event_name, context, common_cpu, common_secs,
+       common_nsecs, common_pid, common_comm,
+       comm, pid, prio, success, target_cpu):
+       pass
+----
+
+The handler function takes the form subsystem__event_name.
+
+The common_* arguments in the handler's argument list are the set of
+arguments passed to all event handlers; some of the fields correspond
+to the common_* fields in the format file, but some are synthesized,
+and some of the common_* fields aren't common enough to to be passed
+to every event as arguments but are available as library functions.
+
+Here's a brief description of each of the invariant event args:
+
+ event_name 	  	    the name of the event as text
+ context		    an opaque 'cookie' used in calls back into perf
+ common_cpu		    the cpu the event occurred on
+ common_secs		    the secs portion of the event timestamp
+ common_nsecs		    the nsecs portion of the event timestamp
+ common_pid		    the pid of the current task
+ common_comm		    the name of the current process
+
+All of the remaining fields in the event's format file have
+counterparts as handler function arguments of the same name, as can be
+seen in the example above.
+
+The above provides the basics needed to directly access every field of
+every event in a trace, which covers 90% of what you need to know to
+write a useful trace script.  The sections below cover the rest.
+
+SCRIPT LAYOUT
+-------------
+
+Every perf script Python script should start by setting up a Python
+module search path and 'import'ing a few support modules (see module
+descriptions below):
+
+----
+ import os
+ import sys
+
+ sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+	      '/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+ from perf_trace_context import *
+ from Core import *
+----
+
+The rest of the script can contain handler functions and support
+functions in any order.
+
+Aside from the event handler functions discussed above, every script
+can implement a set of optional functions:
+
+*trace_begin*, if defined, is called before any event is processed and
+gives scripts a chance to do setup tasks:
+
+----
+def trace_begin():
+    pass
+----
+
+*trace_end*, if defined, is called after all events have been
+ processed and gives scripts a chance to do end-of-script tasks, such
+ as display results:
+
+----
+def trace_end():
+    pass
+----
+
+*trace_unhandled*, if defined, is called after for any event that
+ doesn't have a handler explicitly defined for it.  The standard set
+ of common arguments are passed into it:
+
+----
+def trace_unhandled(event_name, context, event_fields_dict):
+    pass
+----
+
+*process_event*, if defined, is called for any non-tracepoint event
+
+----
+def process_event(param_dict):
+    pass
+----
+
+*context_switch*, if defined, is called for any context switch
+
+----
+def context_switch(ts, cpu, pid, tid, np_pid, np_tid, machine_pid, out, out_preempt, *x):
+    pass
+----
+
+*auxtrace_error*, if defined, is called for any AUX area tracing error
+
+----
+def auxtrace_error(typ, code, cpu, pid, tid, ip, ts, msg, cpumode, *x):
+    pass
+----
+
+The remaining sections provide descriptions of each of the available
+built-in perf script Python modules and their associated functions.
+
+AVAILABLE MODULES AND FUNCTIONS
+-------------------------------
+
+The following sections describe the functions and variables available
+via the various perf script Python modules.  To use the functions and
+variables from the given module, add the corresponding 'from XXXX
+import' line to your perf script script.
+
+Core.py Module
+~~~~~~~~~~~~~~
+
+These functions provide some essential functions to user scripts.
+
+The *flag_str* and *symbol_str* functions provide human-readable
+strings for flag and symbolic fields.  These correspond to the strings
+and values parsed from the 'print fmt' fields of the event format
+files:
+
+  flag_str(event_name, field_name, field_value) - returns the string representation corresponding to field_value for the flag field field_name of event event_name
+  symbol_str(event_name, field_name, field_value) - returns the string representation corresponding to field_value for the symbolic field field_name of event event_name
+
+The *autodict* function returns a special kind of Python
+dictionary that implements Perl's 'autovivifying' hashes in Python
+i.e. with autovivifying hashes, you can assign nested hash values
+without having to go to the trouble of creating intermediate levels if
+they don't exist.
+
+  autodict() - returns an autovivifying dictionary instance
+
+
+perf_trace_context Module
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Some of the 'common' fields in the event format file aren't all that
+common, but need to be made accessible to user scripts nonetheless.
+
+perf_trace_context defines a set of functions that can be used to
+access this data in the context of the current event.  Each of these
+functions expects a context variable, which is the same as the
+context variable passed into every tracepoint event handler as the second
+argument. For non-tracepoint events, the context variable is also present
+as perf_trace_context.perf_script_context .
+
+ common_pc(context) - returns common_preempt count for the current event
+ common_flags(context) - returns common_flags for the current event
+ common_lock_depth(context) - returns common_lock_depth for the current event
+ perf_sample_insn(context) - returns the machine code instruction
+ perf_set_itrace_options(context, itrace_options) - set --itrace options if they have not been set already
+ perf_sample_srcline(context) - returns source_file_name, line_number
+ perf_sample_srccode(context) - returns source_file_name, line_number, source_line
+
+
+Util.py Module
+~~~~~~~~~~~~~~
+
+Various utility functions for use with perf script:
+
+  nsecs(secs, nsecs) - returns total nsecs given secs/nsecs pair
+  nsecs_secs(nsecs) - returns whole secs portion given nsecs
+  nsecs_nsecs(nsecs) - returns nsecs remainder given nsecs
+  nsecs_str(nsecs) - returns printable string in the form secs.nsecs
+  avg(total, n) - returns average given a sum and a total number of values
+
+SUPPORTED FIELDS
+----------------
+
+Currently supported fields:
+
+ev_name, comm, pid, tid, cpu, ip, time, period, phys_addr, addr,
+symbol, symoff, dso, time_enabled, time_running, values, callchain,
+brstack, brstacksym, datasrc, datasrc_decode, iregs, uregs,
+weight, transaction, raw_buf, attr, cpumode.
+
+Fields that may also be present:
+
+ flags - sample flags
+ flags_disp - sample flags display
+ insn_cnt - instruction count for determining instructions-per-cycle (IPC)
+ cyc_cnt - cycle count for determining IPC
+ addr_correlates_sym - addr can correlate to a symbol
+ addr_dso - addr dso
+ addr_symbol - addr symbol
+ addr_symoff - addr symbol offset
+
+Some fields have sub items:
+
+brstack:
+    from, to, from_dsoname, to_dsoname, mispred,
+    predicted, in_tx, abort, cycles.
+
+brstacksym:
+    items: from, to, pred, in_tx, abort (converted string)
+
+For example,
+We can use this code to print brstack "from", "to", "cycles".
+
+if 'brstack' in dict:
+	for entry in dict['brstack']:
+		print "from %s, to %s, cycles %s" % (entry["from"], entry["to"], entry["cycles"])
+
+SEE ALSO
+--------
+linkperf:perf-script[1]