Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 137 insertions, 0 deletions

diff --git a/tools/testing/ktest/examples/vmware.conf b/tools/testing/ktest/examples/vmware.conf
new file mode 100644
index 000000000..61958163d
--- /dev/null
+++ b/tools/testing/ktest/examples/vmware.conf
@@ -0,0 +1,137 @@
+#
+# This config is an example usage of ktest.pl with a vmware guest
+#
+# VMware Setup:
+# -------------
+# - Edit the Virtual Machine ("Edit virtual machine settings")
+# - Add a Serial Port
+#   - You almost certainly want it set "Connect at power on"
+#   - Select "Use socket (named pipe)"
+#   - Select a name that you'll recognize, like 'ktestserialpipe'
+#   - From: Server
+#   - To: A Virtual Machine
+#   - Save
+# - Make sure you note the name, it will be in the base directory of the
+#   virtual machine (where the "disks" are stored.  The default
+#   is /var/lib/vmware/<virtual machine name>/<the name you entered above>
+#
+# - Make note of the path to the VM
+# </End VMware setup>
+#
+# The guest is called 'Guest' and this would be something that
+# could be run on the host to test a virtual machine target.
+
+MACHINE = Guest
+
+# Name of the serial pipe you set in the VMware settings
+VMWARE_SERIAL_NAME = <the name you entered above>
+
+# Define a variable of the name of the VM
+# Noting this needs to be the name of the kmx file, and usually, the
+# name of the directory that it's in.  If the directory and name
+# differ change the VMWARE_VM_DIR accordingly.
+# Please ommit the .kmx extension
+VMWARE_VM_NAME = <virtual machine name>
+
+# VM dir name.  This is usually the same as the virtual machine's name,
+# but not always the case.  Change if they differ
+VMWARE_VM_DIR = ${VMWARE_VM_NAME}
+
+# Base directory that the Virtual machine is contained in
+# /var/lib/vmware is the default on Linux
+VMWARE_VM_BASE_DIR = /var/lib/vmware/${VMWARE_VM_DIR}
+
+# Use ncat to read the unix pipe.  Anything that can read the Unix Pipe
+# and output it's contents to stdout will work
+CONSOLE = /usr/bin/ncat -U ${VMWARE_VM_BASE_DIR}/${VMWARE_SERIAL_NAME}
+
+# Define what version of Workstation you are using
+# This is used by vmrun to use the appropriate appripriate pieces to 
+# test this.  In all likelihood you want 'ws' or 'player' 
+# Valid options:
+# 	ws - Workstation (Windows or Linux host)
+# 	fusion - Fusion (Mac host)
+# 	player - Using VMware Player (Windows or Linux host)
+# Note: vmrun has to run directly on the host machine
+VMWARE_HOST_TYPE = ws
+
+# VMware provides `vmrun` to allow you to do certain things to the virtual machine
+# This should hard reset the VM and force a boot
+VMWARE_POWER_CYCLE = /usr/bin/vmrun -T ${VMWARE_HOST_TYPE} reset ${VMWARE_VM_BASE_DIR}/${VMWARE_VM_NAME}.kmx nogui
+
+#*************************************#
+# This part is the same as test.conf  #
+#*************************************#
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+#  See include/defaults.conf
+REBOOT := empty
+
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+
+#*************************************#
+# Now we are different from test.conf #
+#*************************************#
+
+
+# The example here assumes that Guest is running a Fedora release
+# that uses dracut for its initfs. The POST_INSTALL will be executed
+# after the install of the kernel and modules are complete.
+#
+POST_INSTALL = ${SSH} /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# Guests sometimes get stuck on reboot. We wait 3 seconds after running
+# the reboot command and then  do a full power-cycle of the guest.
+# This forces the guest to restart.
+#
+POWERCYCLE_AFTER_REBOOT = 3
+
+# We do the same after the halt command, but this time we wait 20 seconds.
+POWEROFF_AFTER_HALT = 20
+
+
+# As the defaults.conf file has a POWER_CYCLE option already defined,
+# and options can not be defined in the same section more than once
+# (all DEFAULTS sections are considered the same). We use the
+# DEFAULTS OVERRIDE to tell ktest.pl to ignore the previous defined
+# options, for the options set in the OVERRIDE section.
+#
+DEFAULTS OVERRIDE
+
+# Instead of using the default POWER_CYCLE option defined in
+# defaults.conf, we use virsh to cycle it. To do so, we destroy
+# the guest, wait 5 seconds, and then start it up again.
+# Crude, but effective.
+#
+POWER_CYCLE = ${VMWARE_POWER_CYCLE}
+
+
+DEFAULTS
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf