Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 209 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
new file mode 100755
index 000000000..4e3ec38cb
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -0,0 +1,209 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 Intel Corporation, Weqaar Janjua <weqaar.a.janjua@intel.com>
+
+# AF_XDP selftests based on veth
+#
+# End-to-end AF_XDP over Veth test
+#
+# Topology:
+# ---------
+#                 -----------
+#               _ | Process | _
+#              /  -----------  \
+#             /        |        \
+#            /         |         \
+#      -----------     |     -----------
+#      | Thread1 |     |     | Thread2 |
+#      -----------     |     -----------
+#           |          |          |
+#      -----------     |     -----------
+#      |  xskX   |     |     |  xskY   |
+#      -----------     |     -----------
+#           |          |          |
+#      -----------     |     ----------
+#      |  vethX  | --------- |  vethY |
+#      -----------   peer    ----------
+#           |          |          |
+#      namespaceX      |     namespaceY
+#
+# AF_XDP is an address family optimized for high performance packet processing,
+# it is XDP’s user-space interface.
+#
+# An AF_XDP socket is linked to a single UMEM which is a region of virtual
+# contiguous memory, divided into equal-sized frames.
+#
+# Refer to AF_XDP Kernel Documentation for detailed information:
+# https://www.kernel.org/doc/html/latest/networking/af_xdp.html
+#
+# Prerequisites setup by script:
+#
+#   Set up veth interfaces as per the topology shown ^^:
+#   * setup two veth interfaces and one namespace
+#   ** veth<xxxx> in root namespace
+#   ** veth<yyyy> in af_xdp<xxxx> namespace
+#   ** namespace af_xdp<xxxx>
+#   *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
+#       conflict with any existing interface
+#   * tests the veth and xsk layers of the topology
+#
+# See the source xskxceiver.c for information on each test
+#
+# Kernel configuration:
+# ---------------------
+# See "config" file for recommended kernel config options.
+#
+# Turn on XDP sockets and veth support when compiling i.e.
+# 	Networking support -->
+# 		Networking options -->
+# 			[ * ] XDP sockets
+#
+# Executing Tests:
+# ----------------
+# Must run with CAP_NET_ADMIN capability.
+#
+# Run:
+#   sudo ./test_xsk.sh
+#
+# If running from kselftests:
+#   sudo make run_tests
+#
+# Run with verbose output:
+#   sudo ./test_xsk.sh -v
+#
+# Run and dump packet contents:
+#   sudo ./test_xsk.sh -D
+#
+# Run test suite for physical device in loopback mode
+#   sudo ./test_xsk.sh -i IFACE
+
+. xsk_prereqs.sh
+
+ETH=""
+
+while getopts "vDi:" flag
+do
+	case "${flag}" in
+		v) verbose=1;;
+		D) dump_pkts=1;;
+		i) ETH=${OPTARG};;
+	esac
+done
+
+TEST_NAME="PREREQUISITES"
+
+URANDOM=/dev/urandom
+[ ! -e "${URANDOM}" ] && { echo "${URANDOM} not found. Skipping tests."; test_exit $ksft_fail; }
+
+VETH0_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH0=ve${VETH0_POSTFIX}
+VETH1_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH1=ve${VETH1_POSTFIX}
+NS0=root
+NS1=af_xdp${VETH1_POSTFIX}
+MTU=1500
+
+trap ctrl_c INT
+
+function ctrl_c() {
+        cleanup_exit ${VETH0} ${VETH1} ${NS1}
+	exit 1
+}
+
+setup_vethPairs() {
+	if [[ $verbose -eq 1 ]]; then
+	        echo "setting up ${VETH0}: namespace: ${NS0}"
+	fi
+	ip netns add ${NS1}
+	ip link add ${VETH0} numtxqueues 4 numrxqueues 4 type veth peer name ${VETH1} numtxqueues 4 numrxqueues 4
+	if [ -f /proc/net/if_inet6 ]; then
+		echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6
+		echo 1 > /proc/sys/net/ipv6/conf/${VETH1}/disable_ipv6
+	fi
+	if [[ $verbose -eq 1 ]]; then
+	        echo "setting up ${VETH1}: namespace: ${NS1}"
+	fi
+
+	if [[ $busy_poll -eq 1 ]]; then
+	        echo 2 > /sys/class/net/${VETH0}/napi_defer_hard_irqs
+		echo 200000 > /sys/class/net/${VETH0}/gro_flush_timeout
+		echo 2 > /sys/class/net/${VETH1}/napi_defer_hard_irqs
+		echo 200000 > /sys/class/net/${VETH1}/gro_flush_timeout
+	fi
+
+	ip link set ${VETH1} netns ${NS1}
+	ip netns exec ${NS1} ip link set ${VETH1} mtu ${MTU}
+	ip link set ${VETH0} mtu ${MTU}
+	ip netns exec ${NS1} ip link set ${VETH1} up
+	ip netns exec ${NS1} ip link set dev lo up
+	ip link set ${VETH0} up
+}
+
+if [ ! -z $ETH ]; then
+	VETH0=${ETH}
+	VETH1=${ETH}
+	NS1=""
+else
+	validate_root_exec
+	validate_veth_support ${VETH0}
+	validate_ip_utility
+	setup_vethPairs
+
+	retval=$?
+	if [ $retval -ne 0 ]; then
+		test_status $retval "${TEST_NAME}"
+		cleanup_exit ${VETH0} ${VETH1} ${NS1}
+		exit $retval
+	fi
+fi
+
+
+if [[ $verbose -eq 1 ]]; then
+	ARGS+="-v "
+fi
+
+if [[ $dump_pkts -eq 1 ]]; then
+	ARGS="-D "
+fi
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+
+## START TESTS
+
+statusList=()
+
+TEST_NAME="XSK_SELFTESTS_${VETH0}_SOFTIRQ"
+
+exec_xskxceiver
+
+if [ -z $ETH ]; then
+	cleanup_exit ${VETH0} ${VETH1} ${NS1}
+fi
+TEST_NAME="XSK_SELFTESTS_${VETH0}_BUSY_POLL"
+busy_poll=1
+
+if [ -z $ETH ]; then
+	setup_vethPairs
+fi
+exec_xskxceiver
+
+## END TESTS
+
+if [ -z $ETH ]; then
+	cleanup_exit ${VETH0} ${VETH1} ${NS1}
+fi
+
+failures=0
+echo -e "\nSummary:"
+for i in "${!statusList[@]}"
+do
+	if [ ${statusList[$i]} -ne 0 ]; then
+	        test_status ${statusList[$i]} ${nameList[$i]}
+		failures=1
+	fi
+done
+
+if [ $failures -eq 0 ]; then
+        echo "All tests successful!"
+fi