Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 218 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh
new file mode 100755
index 000000000..0c7437526
--- /dev/null
+++ b/tools/testing/selftests/net/udpgro.sh
@@ -0,0 +1,218 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a series of udpgro functional tests.
+
+readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+
+BPF_FILE="../bpf/xdp_dummy.bpf.o"
+
+# set global exit status, but never reset nonzero one.
+check_err()
+{
+	if [ $ret -eq 0 ]; then
+		ret=$1
+	fi
+}
+
+cleanup() {
+	local -r jobs="$(jobs -p)"
+	local -r ns="$(ip netns list|grep $PEER_NS)"
+
+	[ -n "${jobs}" ] && kill -1 ${jobs} 2>/dev/null
+	[ -n "$ns" ] && ip netns del $ns 2>/dev/null
+}
+trap cleanup EXIT
+
+cfg_veth() {
+	ip netns add "${PEER_NS}"
+	ip -netns "${PEER_NS}" link set lo up
+	ip link add type veth
+	ip link set dev veth0 up
+	ip addr add dev veth0 192.168.1.2/24
+	ip addr add dev veth0 2001:db8::2/64 nodad
+
+	ip link set dev veth1 netns "${PEER_NS}"
+	ip -netns "${PEER_NS}" addr add dev veth1 192.168.1.1/24
+	ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad
+	ip -netns "${PEER_NS}" link set dev veth1 up
+	ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp
+}
+
+run_one() {
+	# use 'rx' as separator between sender args and receiver args
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local -r rx_args=${all#*rx}
+
+	cfg_veth
+
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} && \
+		echo "ok" || \
+		echo "failed" &
+
+	# Hack: let bg programs complete the startup
+	sleep 0.2
+	./udpgso_bench_tx ${tx_args}
+	ret=$?
+	wait $(jobs -p)
+	return $ret
+}
+
+run_test() {
+	local -r args=$@
+
+	printf " %-40s" "$1"
+	./in_netns.sh $0 __subprocess $2 rx -G -r $3
+}
+
+run_one_nat() {
+	# use 'rx' as separator between sender args and receiver args
+	local addr1 addr2 pid family="" ipt_cmd=ip6tables
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local -r rx_args=${all#*rx}
+
+	if [[ ${tx_args} = *-4* ]]; then
+		ipt_cmd=iptables
+		family=-4
+		addr1=192.168.1.1
+		addr2=192.168.1.3/24
+	else
+		addr1=2001:db8::1
+		addr2="2001:db8::3/64 nodad"
+	fi
+
+	cfg_veth
+	ip -netns "${PEER_NS}" addr add dev veth1 ${addr2}
+
+	# fool the GRO engine changing the destination address ...
+	ip netns exec "${PEER_NS}" $ipt_cmd -t nat -I PREROUTING -d ${addr1} -j DNAT --to-destination ${addr2%/*}
+
+	# ... so that GRO will match the UDP_GRO enabled socket, but packets
+	# will land on the 'plain' one
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -G ${family} -b ${addr1} -n 0 &
+	pid=$!
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${family} -b ${addr2%/*} ${rx_args} && \
+		echo "ok" || \
+		echo "failed"&
+
+	sleep 0.1
+	./udpgso_bench_tx ${tx_args}
+	ret=$?
+	kill -INT $pid
+	wait $(jobs -p)
+	return $ret
+}
+
+run_one_2sock() {
+	# use 'rx' as separator between sender args and receiver args
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local -r rx_args=${all#*rx}
+
+	cfg_veth
+
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} -p 12345 &
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 2000 -R 10 ${rx_args} && \
+		echo "ok" || \
+		echo "failed" &
+
+	# Hack: let bg programs complete the startup
+	sleep 0.2
+	./udpgso_bench_tx ${tx_args} -p 12345
+	sleep 0.1
+	# first UDP GSO socket should be closed at this point
+	./udpgso_bench_tx ${tx_args}
+	ret=$?
+	wait $(jobs -p)
+	return $ret
+}
+
+run_nat_test() {
+	local -r args=$@
+
+	printf " %-40s" "$1"
+	./in_netns.sh $0 __subprocess_nat $2 rx -r $3
+}
+
+run_2sock_test() {
+	local -r args=$@
+
+	printf " %-40s" "$1"
+	./in_netns.sh $0 __subprocess_2sock $2 rx -G -r $3
+}
+
+run_all() {
+	local -r core_args="-l 4"
+	local -r ipv4_args="${core_args} -4 -D 192.168.1.1"
+	local -r ipv6_args="${core_args} -6 -D 2001:db8::1"
+	ret=0
+
+	echo "ipv4"
+	run_test "no GRO" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400"
+	check_err $?
+
+	# explicitly check we are not receiving UDP_SEGMENT cmsg (-S -1)
+	# when GRO does not take place
+	run_test "no GRO chk cmsg" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400 -S -1"
+	check_err $?
+
+	# the GSO packets are aggregated because:
+	# * veth schedule napi after each xmit
+	# * segmentation happens in BH context, veth napi poll is delayed after
+	#   the transmission of the last segment
+	run_test "GRO" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720"
+	check_err $?
+	run_test "GRO chk cmsg" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720 -S 1472"
+	check_err $?
+	run_test "GRO with custom segment size" "${ipv4_args} -M 1 -s 14720 -S 500 " "-4 -n 1 -l 14720"
+	check_err $?
+	run_test "GRO with custom segment size cmsg" "${ipv4_args} -M 1 -s 14720 -S 500 " "-4 -n 1 -l 14720 -S 500"
+	check_err $?
+
+	run_nat_test "bad GRO lookup" "${ipv4_args} -M 1 -s 14720 -S 0" "-n 10 -l 1472"
+	check_err $?
+	run_2sock_test "multiple GRO socks" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720 -S 1472"
+	check_err $?
+
+	echo "ipv6"
+	run_test "no GRO" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400"
+	check_err $?
+	run_test "no GRO chk cmsg" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400 -S -1"
+	check_err $?
+	run_test "GRO" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520"
+	check_err $?
+	run_test "GRO chk cmsg" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520 -S 1452"
+	check_err $?
+	run_test "GRO with custom segment size" "${ipv6_args} -M 1 -s 14520 -S 500" "-n 1 -l 14520"
+	check_err $?
+	run_test "GRO with custom segment size cmsg" "${ipv6_args} -M 1 -s 14520 -S 500" "-n 1 -l 14520 -S 500"
+	check_err $?
+
+	run_nat_test "bad GRO lookup" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 10 -l 1452"
+	check_err $?
+	run_2sock_test "multiple GRO socks" "${ipv6_args} -M 1 -s 14520 -S 0 " "-n 1 -l 14520 -S 1452"
+	check_err $?
+	return $ret
+}
+
+if [ ! -f ${BPF_FILE} ]; then
+	echo "Missing ${BPF_FILE}. Build bpf selftest first"
+	exit -1
+fi
+
+if [[ $# -eq 0 ]]; then
+	run_all
+elif [[ $1 == "__subprocess" ]]; then
+	shift
+	run_one $@
+elif [[ $1 == "__subprocess_nat" ]]; then
+	shift
+	run_one_nat $@
+elif [[ $1 == "__subprocess_2sock" ]]; then
+	shift
+	run_one_2sock $@
+fi
+
+exit $?