summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide/kernel-per-CPU-kthreads.rst')
-rw-r--r--Documentation/admin-guide/kernel-per-CPU-kthreads.rst334
1 files changed, 334 insertions, 0 deletions
diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
new file mode 100644
index 000000000..e4a5fc26f
--- /dev/null
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -0,0 +1,334 @@
+==========================================
+Reducing OS jitter due to per-cpu kthreads
+==========================================
+
+This document lists per-CPU kthreads in the Linux kernel and presents
+options to control their OS jitter. Note that non-per-CPU kthreads are
+not listed here. To reduce OS jitter from non-per-CPU kthreads, bind
+them to a "housekeeping" CPU dedicated to such work.
+
+References
+==========
+
+- Documentation/core-api/irq/irq-affinity.rst: Binding interrupts to sets of CPUs.
+
+- Documentation/admin-guide/cgroup-v1: Using cgroups to bind tasks to sets of CPUs.
+
+- man taskset: Using the taskset command to bind tasks to sets
+ of CPUs.
+
+- man sched_setaffinity: Using the sched_setaffinity() system
+ call to bind tasks to sets of CPUs.
+
+- /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state,
+ writing "0" to offline and "1" to online.
+
+- In order to locate kernel-generated OS jitter on CPU N:
+
+ cd /sys/kernel/debug/tracing
+ echo 1 > max_graph_depth # Increase the "1" for more detail
+ echo function_graph > current_tracer
+ # run workload
+ cat per_cpu/cpuN/trace
+
+kthreads
+========
+
+Name:
+ ehca_comp/%u
+
+Purpose:
+ Periodically process Infiniband-related work.
+
+To reduce its OS jitter, do any of the following:
+
+1. Don't use eHCA Infiniband hardware, instead choosing hardware
+ that does not require per-CPU kthreads. This will prevent these
+ kthreads from being created in the first place. (This will
+ work for most people, as this hardware, though important, is
+ relatively old and is produced in relatively low unit volumes.)
+2. Do all eHCA-Infiniband-related work on other CPUs, including
+ interrupts.
+3. Rework the eHCA driver so that its per-CPU kthreads are
+ provisioned only on selected CPUs.
+
+
+Name:
+ irq/%d-%s
+
+Purpose:
+ Handle threaded interrupts.
+
+To reduce its OS jitter, do the following:
+
+1. Use irq affinity to force the irq threads to execute on
+ some other CPU.
+
+Name:
+ kcmtpd_ctr_%d
+
+Purpose:
+ Handle Bluetooth work.
+
+To reduce its OS jitter, do one of the following:
+
+1. Don't use Bluetooth, in which case these kthreads won't be
+ created in the first place.
+2. Use irq affinity to force Bluetooth-related interrupts to
+ occur on some other CPU and furthermore initiate all
+ Bluetooth activity on some other CPU.
+
+Name:
+ ksoftirqd/%u
+
+Purpose:
+ Execute softirq handlers when threaded or when under heavy load.
+
+To reduce its OS jitter, each softirq vector must be handled
+separately as follows:
+
+TIMER_SOFTIRQ
+-------------
+
+Do all of the following:
+
+1. To the extent possible, keep the CPU out of the kernel when it
+ is non-idle, for example, by avoiding system calls and by forcing
+ both kernel threads and interrupts to execute elsewhere.
+2. Build with CONFIG_HOTPLUG_CPU=y. After boot completes, force
+ the CPU offline, then bring it back online. This forces
+ recurring timers to migrate elsewhere. If you are concerned
+ with multiple CPUs, force them all offline before bringing the
+ first one back online. Once you have onlined the CPUs in question,
+ do not offline any other CPUs, because doing so could force the
+ timer back onto one of the CPUs in question.
+
+NET_TX_SOFTIRQ and NET_RX_SOFTIRQ
+---------------------------------
+
+Do all of the following:
+
+1. Force networking interrupts onto other CPUs.
+2. Initiate any network I/O on other CPUs.
+3. Once your application has started, prevent CPU-hotplug operations
+ from being initiated from tasks that might run on the CPU to
+ be de-jittered. (It is OK to force this CPU offline and then
+ bring it back online before you start your application.)
+
+BLOCK_SOFTIRQ
+-------------
+
+Do all of the following:
+
+1. Force block-device interrupts onto some other CPU.
+2. Initiate any block I/O on other CPUs.
+3. Once your application has started, prevent CPU-hotplug operations
+ from being initiated from tasks that might run on the CPU to
+ be de-jittered. (It is OK to force this CPU offline and then
+ bring it back online before you start your application.)
+
+IRQ_POLL_SOFTIRQ
+----------------
+
+Do all of the following:
+
+1. Force block-device interrupts onto some other CPU.
+2. Initiate any block I/O and block-I/O polling on other CPUs.
+3. Once your application has started, prevent CPU-hotplug operations
+ from being initiated from tasks that might run on the CPU to
+ be de-jittered. (It is OK to force this CPU offline and then
+ bring it back online before you start your application.)
+
+TASKLET_SOFTIRQ
+---------------
+
+Do one or more of the following:
+
+1. Avoid use of drivers that use tasklets. (Such drivers will contain
+ calls to things like tasklet_schedule().)
+2. Convert all drivers that you must use from tasklets to workqueues.
+3. Force interrupts for drivers using tasklets onto other CPUs,
+ and also do I/O involving these drivers on other CPUs.
+
+SCHED_SOFTIRQ
+-------------
+
+Do all of the following:
+
+1. Avoid sending scheduler IPIs to the CPU to be de-jittered,
+ for example, ensure that at most one runnable kthread is present
+ on that CPU. If a thread that expects to run on the de-jittered
+ CPU awakens, the scheduler will send an IPI that can result in
+ a subsequent SCHED_SOFTIRQ.
+2. CONFIG_NO_HZ_FULL=y and ensure that the CPU to be de-jittered
+ is marked as an adaptive-ticks CPU using the "nohz_full="
+ boot parameter. This reduces the number of scheduler-clock
+ interrupts that the de-jittered CPU receives, minimizing its
+ chances of being selected to do the load balancing work that
+ runs in SCHED_SOFTIRQ context.
+3. To the extent possible, keep the CPU out of the kernel when it
+ is non-idle, for example, by avoiding system calls and by
+ forcing both kernel threads and interrupts to execute elsewhere.
+ This further reduces the number of scheduler-clock interrupts
+ received by the de-jittered CPU.
+
+HRTIMER_SOFTIRQ
+---------------
+
+Do all of the following:
+
+1. To the extent possible, keep the CPU out of the kernel when it
+ is non-idle. For example, avoid system calls and force both
+ kernel threads and interrupts to execute elsewhere.
+2. Build with CONFIG_HOTPLUG_CPU=y. Once boot completes, force the
+ CPU offline, then bring it back online. This forces recurring
+ timers to migrate elsewhere. If you are concerned with multiple
+ CPUs, force them all offline before bringing the first one
+ back online. Once you have onlined the CPUs in question, do not
+ offline any other CPUs, because doing so could force the timer
+ back onto one of the CPUs in question.
+
+RCU_SOFTIRQ
+-----------
+
+Do at least one of the following:
+
+1. Offload callbacks and keep the CPU in either dyntick-idle or
+ adaptive-ticks state by doing all of the following:
+
+ a. CONFIG_NO_HZ_FULL=y and ensure that the CPU to be
+ de-jittered is marked as an adaptive-ticks CPU using the
+ "nohz_full=" boot parameter. Bind the rcuo kthreads to
+ housekeeping CPUs, which can tolerate OS jitter.
+ b. To the extent possible, keep the CPU out of the kernel
+ when it is non-idle, for example, by avoiding system
+ calls and by forcing both kernel threads and interrupts
+ to execute elsewhere.
+
+2. Enable RCU to do its processing remotely via dyntick-idle by
+ doing all of the following:
+
+ a. Build with CONFIG_NO_HZ=y.
+ b. Ensure that the CPU goes idle frequently, allowing other
+ CPUs to detect that it has passed through an RCU quiescent
+ state. If the kernel is built with CONFIG_NO_HZ_FULL=y,
+ userspace execution also allows other CPUs to detect that
+ the CPU in question has passed through a quiescent state.
+ c. To the extent possible, keep the CPU out of the kernel
+ when it is non-idle, for example, by avoiding system
+ calls and by forcing both kernel threads and interrupts
+ to execute elsewhere.
+
+Name:
+ kworker/%u:%d%s (cpu, id, priority)
+
+Purpose:
+ Execute workqueue requests
+
+To reduce its OS jitter, do any of the following:
+
+1. Run your workload at a real-time priority, which will allow
+ preempting the kworker daemons.
+2. A given workqueue can be made visible in the sysfs filesystem
+ by passing the WQ_SYSFS to that workqueue's alloc_workqueue().
+ Such a workqueue can be confined to a given subset of the
+ CPUs using the ``/sys/devices/virtual/workqueue/*/cpumask`` sysfs
+ files. The set of WQ_SYSFS workqueues can be displayed using
+ "ls /sys/devices/virtual/workqueue". That said, the workqueues
+ maintainer would like to caution people against indiscriminately
+ sprinkling WQ_SYSFS across all the workqueues. The reason for
+ caution is that it is easy to add WQ_SYSFS, but because sysfs is
+ part of the formal user/kernel API, it can be nearly impossible
+ to remove it, even if its addition was a mistake.
+3. Do any of the following needed to avoid jitter that your
+ application cannot tolerate:
+
+ a. Build your kernel with CONFIG_SLUB=y rather than
+ CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
+ use of each CPU's workqueues to run its cache_reap()
+ function.
+ b. Avoid using oprofile, thus avoiding OS jitter from
+ wq_sync_buffer().
+ c. Limit your CPU frequency so that a CPU-frequency
+ governor is not required, possibly enlisting the aid of
+ special heatsinks or other cooling technologies. If done
+ correctly, and if you CPU architecture permits, you should
+ be able to build your kernel with CONFIG_CPU_FREQ=n to
+ avoid the CPU-frequency governor periodically running
+ on each CPU, including cs_dbs_timer() and od_dbs_timer().
+
+ WARNING: Please check your CPU specifications to
+ make sure that this is safe on your particular system.
+ d. As of v3.18, Christoph Lameter's on-demand vmstat workers
+ commit prevents OS jitter due to vmstat_update() on
+ CONFIG_SMP=y systems. Before v3.18, is not possible
+ to entirely get rid of the OS jitter, but you can
+ decrease its frequency by writing a large value to
+ /proc/sys/vm/stat_interval. The default value is HZ,
+ for an interval of one second. Of course, larger values
+ will make your virtual-memory statistics update more
+ slowly. Of course, you can also run your workload at
+ a real-time priority, thus preempting vmstat_update(),
+ but if your workload is CPU-bound, this is a bad idea.
+ However, there is an RFC patch from Christoph Lameter
+ (based on an earlier one from Gilad Ben-Yossef) that
+ reduces or even eliminates vmstat overhead for some
+ workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
+ e. If running on high-end powerpc servers, build with
+ CONFIG_PPC_RTAS_DAEMON=n. This prevents the RTAS
+ daemon from running on each CPU every second or so.
+ (This will require editing Kconfig files and will defeat
+ this platform's RAS functionality.) This avoids jitter
+ due to the rtas_event_scan() function.
+ WARNING: Please check your CPU specifications to
+ make sure that this is safe on your particular system.
+ f. If running on Cell Processor, build your kernel with
+ CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
+ spu_gov_work().
+ WARNING: Please check your CPU specifications to
+ make sure that this is safe on your particular system.
+ g. If running on PowerMAC, build your kernel with
+ CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
+ avoiding OS jitter from rackmeter_do_timer().
+
+Name:
+ rcuc/%u
+
+Purpose:
+ Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels.
+
+To reduce its OS jitter, do at least one of the following:
+
+1. Build the kernel with CONFIG_PREEMPT=n. This prevents these
+ kthreads from being created in the first place, and also obviates
+ the need for RCU priority boosting. This approach is feasible
+ for workloads that do not require high degrees of responsiveness.
+2. Build the kernel with CONFIG_RCU_BOOST=n. This prevents these
+ kthreads from being created in the first place. This approach
+ is feasible only if your workload never requires RCU priority
+ boosting, for example, if you ensure frequent idle time on all
+ CPUs that might execute within the kernel.
+3. Build with CONFIG_RCU_NOCB_CPU=y and boot with the rcu_nocbs=
+ boot parameter offloading RCU callbacks from all CPUs susceptible
+ to OS jitter. This approach prevents the rcuc/%u kthreads from
+ having any work to do, so that they are never awakened.
+4. Ensure that the CPU never enters the kernel, and, in particular,
+ avoid initiating any CPU hotplug operations on this CPU. This is
+ another way of preventing any callbacks from being queued on the
+ CPU, again preventing the rcuc/%u kthreads from having any work
+ to do.
+
+Name:
+ rcuop/%d and rcuos/%d
+
+Purpose:
+ Offload RCU callbacks from the corresponding CPU.
+
+To reduce its OS jitter, do at least one of the following:
+
+1. Use affinity, cgroups, or other mechanism to force these kthreads
+ to execute on some other CPU.
+2. Build with CONFIG_RCU_NOCB_CPU=n, which will prevent these
+ kthreads from being created in the first place. However, please
+ note that this will not eliminate OS jitter, but will instead
+ shift it to RCU_SOFTIRQ.