diff options
Diffstat (limited to 'Documentation/devicetree/bindings/auxdisplay')
5 files changed, 385 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml new file mode 100644 index 000000000..5d02bd032 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/arm,versatile-lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Character LCD + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Rob Herring <robh@kernel.org> + +description: + This binding defines the character LCD interface found on ARM Versatile AB + and PB reference platforms. + +properties: + compatible: + const: arm,versatile-lcd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + lcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml new file mode 100644 index 000000000..fde07e4b1 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hitachi HD44780 Character LCD Controller + +maintainers: + - Geert Uytterhoeven <geert@linux-m68k.org> + +description: + The Hitachi HD44780 Character LCD Controller is commonly used on character + LCDs that can display one or more lines of text. It exposes an M6800 bus + interface, which can be used in either 4-bit or 8-bit mode. By using a + GPIO expander it is possible to use the driver with one of the popular I2C + expander boards based on the PCF8574 available for these displays. For + an example see below. + +properties: + compatible: + const: hit,hd44780 + + data-gpios: + description: + GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or + DB4-DB7 (4-bit mode) of the LCD Controller's bus interface. + oneOf: + - maxItems: 4 + - maxItems: 8 + + enable-gpios: + description: + GPIO pin connected to the "E" (Enable) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + rs-gpios: + description: + GPIO pin connected to the "RS" (Register Select) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + rw-gpios: + description: + GPIO pin connected to the "RW" (Read/Write) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + backlight-gpios: + description: GPIO pin used for enabling the LCD's backlight. + maxItems: 1 + + display-height-chars: + description: Height of the display, in character cells, + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + display-width-chars: + description: Width of the display, in character cells. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 64 + + internal-buffer-width: + description: + Internal buffer width (default is 40 for displays with 1 or 2 lines, and + display-width-chars for displays with more than 2 lines). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 64 + +required: + - compatible + - data-gpios + - enable-gpios + - rs-gpios + - display-height-chars + - display-width-chars + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + auxdisplay { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; + }; + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pcf8574: pcf8574@27 { + compatible = "nxp,pcf8574"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + hd44780 { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <16>; + data-gpios = <&pcf8574 4 0>, + <&pcf8574 5 0>, + <&pcf8574 6 0>, + <&pcf8574 7 0>; + enable-gpios = <&pcf8574 2 0>; + rs-gpios = <&pcf8574 0 0>; + rw-gpios = <&pcf8574 1 0>; + backlight-gpios = <&pcf8574 3 0>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml new file mode 100644 index 000000000..fc4873deb --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Holtek HT16K33 RAM mapping 16*8 LED controller with keyscan + +maintainers: + - Robin van der Gracht <robin@protonic.nl> + +allOf: + - $ref: "/schemas/input/matrix-keymap.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - adafruit,3108 # 0.56" 4-Digit 7-Segment FeatherWing Display (Red) + - adafruit,3130 # 0.54" Quad Alphanumeric FeatherWing Display (Red) + - const: holtek,ht16k33 + + - const: holtek,ht16k33 # Generic 16*8 LED controller with dot-matrix display + + reg: + maxItems: 1 + + refresh-rate-hz: + maxItems: 1 + description: Display update interval in Hertz for dot-matrix displays + + interrupts: + maxItems: 1 + + debounce-delay-ms: + maxItems: 1 + description: Debouncing interval time in milliseconds + + linux,keymap: true + + linux,no-autorepeat: + description: Disable keyrepeat + + default-brightness-level: + minimum: 1 + maximum: 16 + default: 16 + description: Initial brightness level + + led: + type: object + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +if: + properties: + compatible: + const: holtek,ht16k33 +then: + required: + - refresh-rate-hz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + #include <dt-bindings/leds/common.h> + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + ht16k33: ht16k33@70 { + compatible = "holtek,ht16k33"; + reg = <0x70>; + refresh-rate-hz = <20>; + interrupt-parent = <&gpio4>; + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + debounce-delay-ms = <50>; + linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, + <MATRIX_KEY(3, 0, KEY_F8)>, + <MATRIX_KEY(4, 0, KEY_F10)>, + <MATRIX_KEY(5, 0, KEY_F4)>, + <MATRIX_KEY(6, 0, KEY_F2)>, + <MATRIX_KEY(2, 1, KEY_F5)>, + <MATRIX_KEY(3, 1, KEY_F7)>, + <MATRIX_KEY(4, 1, KEY_F9)>, + <MATRIX_KEY(5, 1, KEY_F3)>, + <MATRIX_KEY(6, 1, KEY_F1)>; + + led { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_BACKLIGHT; + linux,default-trigger = "backlight"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml new file mode 100644 index 000000000..1899b23de --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/img,ascii-lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASCII LCD displays on Imagination Technologies boards + +maintainers: + - Paul Burton <paulburton@kernel.org> + +properties: + compatible: + enum: + - img,boston-lcd + - mti,malta-lcd + - mti,sead3-lcd + + reg: + maxItems: 1 + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset in bytes to the LCD registers within the system controller + +required: + - compatible + +oneOf: + - required: + - reg + - required: + - offset + +if: + properties: + compatible: + contains: + const: img,boston-lcd +then: + required: + - reg +else: + required: + - offset + +additionalProperties: false + +examples: + - | + lcd: lcd@17fff000 { + compatible = "img,boston-lcd"; + reg = <0x17fff000 0x8>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml new file mode 100644 index 000000000..a1d55a263 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/modtronix,lcd2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Modtronix engineering LCD2S Character LCD Display + +maintainers: + - Lars Poeschel <poeschel@lemonage.de> + +description: + The LCD2S is a Character LCD Display manufactured by Modtronix Engineering. + The display supports a serial I2C and SPI interface. The driver currently + only supports the I2C interface. + +properties: + compatible: + const: modtronix,lcd2s + + reg: + maxItems: 1 + description: + I2C bus address of the display. + + display-height-chars: + description: Height of the display, in character cells. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + display-width-chars: + description: Width of the display, in character cells. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 16 + maximum: 20 + +required: + - compatible + - reg + - display-height-chars + - display-width-chars + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lcd2s: auxdisplay@28 { + compatible = "modtronix,lcd2s"; + reg = <0x28>; + display-height-chars = <4>; + display-width-chars = <20>; + }; + }; |