summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock/silabs,si5341.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si5341.txt175
1 files changed, 175 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
new file mode 100644
index 000000000..ce55aba0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
@@ -0,0 +1,175 @@
+Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable
+i2c clock generator.
+
+Reference
+[1] Si5341 Data Sheet
+ https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
+[2] Si5341 Reference Manual
+ https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+[3] Si5345 Reference Manual
+ https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
+
+The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
+clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
+in turn can be directed to any of the 10 (or 4) outputs through a divider.
+The internal structure of the clock generators can be found in [2].
+The Si5345 is similar to the Si5341 with the addition of fractional input
+dividers and automatic input selection, as described in [3].
+The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
+
+The driver can be used in "as is" mode, reading the current settings from the
+chip at boot, in case you have a (pre-)programmed device. If the PLL is not
+configured when the driver probes, it assumes the driver must fully initialize
+it.
+
+The device type, speed grade and revision are determined runtime by probing.
+
+The driver currently does not support any fancy input configurations. They can
+still be programmed into the chip and the driver will leave them "as is".
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+ "silabs,si5340" - Si5340 A/B/C/D
+ "silabs,si5341" - Si5341 A/B/C/D
+ "silabs,si5342" - Si5342 A/B/C/D
+ "silabs,si5344" - Si5344 A/B/C/D
+ "silabs,si5345" - Si5345 A/B/C/D
+- reg: i2c device address, usually 0x74
+- #clock-cells: from common clock binding; shall be set to 2.
+ The first value is "0" for outputs, "1" for synthesizers.
+ The second value is the output or synthesizer index.
+- clocks: from common clock binding; list of parent clock handles,
+ corresponding to inputs. Use a fixed clock for the "xtal" input.
+ At least one must be present.
+- clock-names: One of: "xtal", "in0", "in1", "in2"
+
+Optional properties:
+- vdd-supply: Regulator node for VDD
+- vdda-supply: Regulator node for VDDA
+- vdds-supply: Regulator node for VDDS
+- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
+ feedback divider. Must be such that the PLL output is in the valid range. For
+ example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only
+ the fraction matters, using 3500 and 12 will deliver the exact same result.
+ If these are not specified, and the PLL is not yet programmed when the driver
+ probes, the PLL will be set to 14GHz.
+- silabs,reprogram: When present, the driver will always assume the device must
+ be initialized, and always performs the soft-reset routine. Since this will
+ temporarily stop all output clocks, don't do this if the chip is generating
+ the CPU clock for example.
+- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used
+ in EXTCLK (external reference clock) rather than XTAL (crystal) mode.
+- interrupts: Interrupt for INTRb pin.
+- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V
+ rather than 1.8V thresholds.
+- vddoX-supply (where X is an output index): Regulator node for VDDO for the
+ specified output. The driver selects the output VDD_SEL setting based on this
+ voltage.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+
+== Child nodes: Outputs ==
+
+The child nodes list the output clocks.
+
+Each of the clock outputs can be overwritten individually by using a child node.
+If a child node for a clock output is not set, the configuration remains
+unchanged.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,format: Output format, one of:
+ 1 = differential (defaults to LVDS levels)
+ 2 = low-power (defaults to HCSL levels)
+ 4 = LVCMOS
+- silabs,common-mode: Manually override output common mode, see [2] for values
+- silabs,amplitude: Manually override output amplitude, see [2] for values
+- silabs,synth-master: boolean. If present, this output is allowed to change the
+ multisynth frequency dynamically.
+- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH
+ when disabled, otherwise it's driven LOW.
+
+==Example==
+
+/* 48MHz reference crystal */
+ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+};
+
+i2c-master-node {
+ /* Programmable clock (for logic) */
+ si5341: clock-generator@74 {
+ reg = <0x74>;
+ compatible = "silabs,si5341";
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+
+ silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
+ silabs,pll-m-den = <48>;
+ silabs,reprogram; /* Chips are not programmed, always reset */
+
+ out@0 {
+ reg = <0>;
+ silabs,format = <1>; /* LVDS 3v3 */
+ silabs,common-mode = <3>;
+ silabs,amplitude = <3>;
+ silabs,synth-master;
+ };
+
+ /*
+ * Output 6 configuration:
+ * LVDS 1v8
+ */
+ out@6 {
+ reg = <6>;
+ silabs,format = <1>; /* LVDS 1v8 */
+ silabs,common-mode = <13>;
+ silabs,amplitude = <3>;
+ };
+
+ /*
+ * Output 8 configuration:
+ * HCSL 3v3
+ */
+ out@8 {
+ reg = <8>;
+ silabs,format = <2>;
+ silabs,common-mode = <11>;
+ silabs,amplitude = <3>;
+ };
+ };
+};
+
+some-video-node {
+ /* Standard clock bindings */
+ clock-names = "pixel";
+ clocks = <&si5341 0 7>; /* Output 7 */
+
+ /* Set output 7 to use syntesizer 3 as its parent */
+ assigned-clocks = <&si5341 0 7>, <&si5341 1 3>;
+ assigned-clock-parents = <&si5341 1 3>;
+ /* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */
+ assigned-clock-rates = <148500000>, <594000000>;
+};
+
+some-audio-node {
+ clock-names = "i2s-clk";
+ clocks = <&si5341 0 0>;
+ /*
+ * since output 0 is a synth-master, the synth will be automatically set
+ * to an appropriate frequency when the audio driver requests another
+ * frequency. We give control over synth 2 to this output here.
+ */
+ assigned-clocks = <&si5341 0 0>;
+ assigned-clock-parents = <&si5341 1 2>;
+};