diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
338 files changed, 25638 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt new file mode 100644 index 000000000..d19885b7c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt @@ -0,0 +1,52 @@ +* Actions Semi Owl Clock Management Unit (CMU) + +The Actions Semi Owl Clock Management Unit generates and supplies clock +to various controllers within the SoC. The clock binding described here is +applicable to S900, S700 and S500 SoC's. + +Required Properties: + +- compatible: should be one of the following, + "actions,s900-cmu" + "actions,s700-cmu" + "actions,s500-cmu" +- reg: physical base address of the controller and length of memory mapped + region. +- clocks: Reference to the parent clocks ("hosc", "losc") +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier, and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in corresponding +dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or +actions,s500-cmu.h header and can be used in device tree sources. + +External clocks: + +The hosc clock used as input for the plls is generated outside the SoC. It is +expected that it is defined using standard clock bindings as "hosc". + +Actions Semi S900 CMU also requires one more clock: + - "losc" - internal low frequency oscillator + +Example: Clock Management Unit node: + + cmu: clock-controller@e0160000 { + compatible = "actions,s900-cmu"; + reg = <0x0 0xe0160000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes clock generated by the clock +management unit: + + uart: serial@e012a000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART5>; + }; diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml new file mode 100644 index 000000000..983033fe5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Analog Devices AXI clkgen pcore clock generator + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The axi_clkgen IP core is a software programmable clock generator, + that can be synthesized on various FPGA platforms. + + Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen + +properties: + compatible: + enum: + - adi,axi-clkgen-2.00.a + - adi,zynqmp-axi-clkgen-2.00.a + + clocks: + description: + Specifies the reference clock(s) from which the output frequency is + derived. This must either reference one clock if only the first clock + input is connected or two if both clock inputs are connected. + minItems: 1 + maxItems: 2 + + '#clock-cells': + const: 0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@ff000000 { + compatible = "adi,axi-clkgen-2.00.a"; + #clock-cells = <0>; + reg = <0xff000000 0x1000>; + clocks = <&osc 1>; + }; diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml new file mode 100644 index 000000000..79b0752fa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EN7523 Clock + +maintainers: + - Felix Fietkau <nbd@nbd.name> + - John Crispin <nbd@nbd.name> + +description: | + This node defines the System Control Unit of the EN7523 SoC, + a collection of registers configuring many different aspects of the SoC. + + The clock driver uses it to read and configure settings of the + PLL controller, which provides clocks for the CPU, the bus and + other SoC internal peripherals. + + Each clock is assigned an identifier and client nodes use this identifier + to specify which clock they consume. + + All these identifiers can be found in: + [1]: <include/dt-bindings/clock/en7523-clk.h>. + + The clocks are provided inside a system controller node. + +properties: + compatible: + items: + - const: airoha,en7523-scu + + reg: + maxItems: 2 + + "#clock-cells": + description: + The first cell indicates the clock number, see [1] for available + clocks. + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/en7523-clk.h> + scu: system-controller@1fa20000 { + compatible = "airoha,en7523-scu"; + reg = <0x1fa20000 0x400>, + <0x1fb00000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml new file mode 100644 index 000000000..93587b700 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 AHB Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-ahb-clk + - allwinner,sun6i-a31-ahb1-clk + - allwinner,sun8i-h3-ahb2-clk + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-ahb-clk + + then: + properties: + clocks: + maxItems: 1 + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-ahb1-clk + + then: + properties: + clocks: + maxItems: 4 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-ahb2-clk + + then: + properties: + clocks: + maxItems: 2 + +examples: + - | + ahb@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + clock-output-names = "ahb"; + }; + + - | + ahb1@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + - | + ahb2_clk@1c2005c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ahb2-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&ahb1>, <&pll6d2>; + clock-output-names = "ahb2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml new file mode 100644 index 000000000..e14e1aad9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 APB0 Bus Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-apb0-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + apb0@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml new file mode 100644 index 000000000..8a4747ebe --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 APB1 Bus Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-apb1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml new file mode 100644 index 000000000..aa08dd49d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 AXI Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-axi-clk + - allwinner,sun8i-a23-axi-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + axi@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + - | + axi_clk@1c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml new file mode 100644 index 000000000..1690b9d99 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Clock Control Unit + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-ccu + - allwinner,sun5i-a10s-ccu + - allwinner,sun5i-a13-ccu + - allwinner,sun6i-a31-ccu + - allwinner,sun7i-a20-ccu + - allwinner,sun8i-a23-ccu + - allwinner,sun8i-a33-ccu + - allwinner,sun8i-a83t-ccu + - allwinner,sun8i-a83t-r-ccu + - allwinner,sun8i-h3-ccu + - allwinner,sun8i-h3-r-ccu + - allwinner,sun8i-r40-ccu + - allwinner,sun8i-v3-ccu + - allwinner,sun8i-v3s-ccu + - allwinner,sun9i-a80-ccu + - allwinner,sun20i-d1-ccu + - allwinner,sun20i-d1-r-ccu + - allwinner,sun50i-a64-ccu + - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-a100-ccu + - allwinner,sun50i-a100-r-ccu + - allwinner,sun50i-h5-ccu + - allwinner,sun50i-h6-ccu + - allwinner,sun50i-h6-r-ccu + - allwinner,sun50i-h616-ccu + - allwinner,sun50i-h616-r-ccu + - allwinner,suniv-f1c100s-ccu + - nextthing,gr8-ccu + + reg: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: High Frequency Oscillator (usually at 24MHz) + - description: Low Frequency Oscillator (usually at 32kHz) + - description: Internal Oscillator + - description: Peripherals PLL + + clock-names: + minItems: 2 + items: + - const: hosc + - const: losc + - const: iosc + - const: pll-periph + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + enum: + - allwinner,sun8i-a83t-r-ccu + - allwinner,sun8i-h3-r-ccu + - allwinner,sun20i-d1-r-ccu + - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-a100-r-ccu + - allwinner,sun50i-h6-r-ccu + - allwinner,sun50i-h616-r-ccu + +then: + properties: + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + minItems: 4 + maxItems: 4 + +else: + if: + properties: + compatible: + enum: + - allwinner,sun20i-d1-ccu + - allwinner,sun50i-a100-ccu + - allwinner,sun50i-h6-ccu + - allwinner,sun50i-h616-ccu + + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + minItems: 3 + maxItems: 3 + + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + - | + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml new file mode 100644 index 000000000..08d073520 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 CPU Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-cpu-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + cpu@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + clock-output-names = "cpu"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml new file mode 100644 index 000000000..e665e50c1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + "#reset-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-display-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml new file mode 100644 index 000000000..c4714d0fb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Bus Gates Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the offset of + the bit controlling this particular gate in the register. + + compatible: + oneOf: + - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun4i-a10-axi-gates-clk + - const: allwinner,sun4i-a10-ahb-gates-clk + - const: allwinner,sun5i-a10s-ahb-gates-clk + - const: allwinner,sun5i-a13-ahb-gates-clk + - const: allwinner,sun7i-a20-ahb-gates-clk + - const: allwinner,sun6i-a31-ahb1-gates-clk + - const: allwinner,sun8i-a23-ahb1-gates-clk + - const: allwinner,sun9i-a80-ahb0-gates-clk + - const: allwinner,sun9i-a80-ahb1-gates-clk + - const: allwinner,sun9i-a80-ahb2-gates-clk + - const: allwinner,sun4i-a10-apb0-gates-clk + - const: allwinner,sun5i-a10s-apb0-gates-clk + - const: allwinner,sun5i-a13-apb0-gates-clk + - const: allwinner,sun7i-a20-apb0-gates-clk + - const: allwinner,sun9i-a80-apb0-gates-clk + - const: allwinner,sun8i-a83t-apb0-gates-clk + - const: allwinner,sun4i-a10-apb1-gates-clk + - const: allwinner,sun5i-a13-apb1-gates-clk + - const: allwinner,sun5i-a10s-apb1-gates-clk + - const: allwinner,sun6i-a31-apb1-gates-clk + - const: allwinner,sun7i-a20-apb1-gates-clk + - const: allwinner,sun8i-a23-apb1-gates-clk + - const: allwinner,sun9i-a80-apb1-gates-clk + - const: allwinner,sun6i-a31-apb2-gates-clk + - const: allwinner,sun8i-a23-apb2-gates-clk + - const: allwinner,sun8i-a83t-bus-gates-clk + - const: allwinner,sun9i-a80-apbs-gates-clk + - const: allwinner,sun4i-a10-dram-gates-clk + + - items: + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk + + - items: + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-indices: + minItems: 1 + maxItems: 64 + + clock-output-names: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-indices + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-indices = <0>; + clock-output-names = "axi_dram"; + }; + + - | + clk@1c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <3>, + <4>, <5>, <6>, + <7>, <8>, <9>, + <10>, <11>, <12>, + <13>, <14>, <16>, + <17>, <18>, <20>, + <21>, <22>, <23>, + <24>, <25>, <26>, + <32>, <33>, <34>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <45>, + <46>, <47>, + <50>, <52>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", + "ahb_ohci1", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", + "ahb_nand", "ahb_sdram", "ahb_ace", + "ahb_emac", "ahb_ts", "ahb_spi0", + "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", + "ahb_ve", "ahb_tvd", "ahb_tve0", + "ahb_tve1", "ahb_lcd0", "ahb_lcd1", + "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", + "ahb_de_fe0", "ahb_de_fe1", + "ahb_mp", "ahb_mali400"; + }; + + + - | + clk@1c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-indices = <0>, <1>, + <2>, <3>, + <5>, <6>, + <7>, <10>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", + "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml new file mode 100644 index 000000000..e824e3348 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MBUS Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun5i-a13-mbus-clk + - allwinner,sun8i-a23-mbus-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; + + - | + clk@1c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>; + clock-output-names = "mbus"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml new file mode 100644 index 000000000..c612f94be --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Module 1 Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + There is three different outputs: the main clock, with the ID 0, + and the output and sample clocks, with the IDs 1 and 2, + respectively. + + compatible: + enum: + - allwinner,sun4i-a10-mmc-clk + - allwinner,sun9i-a80-mmc-clk + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 3 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mmc-clk + +then: + properties: + clocks: + maxItems: 3 + +else: + properties: + clocks: + maxItems: 2 + +examples: + - | + clk@1c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + - | + clk@6000410 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000410 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc0", "mmc0_output", + "mmc0_sample"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml new file mode 100644 index 000000000..80ae3a7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Module 0 Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +select: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun9i-a80-mod0-clk + + # The PRCM on the A31 and A23 will have the reg property missing, + # since it's set at the upper level node, and will be validated by + # PRCM's schema. Make sure we only validate standalone nodes. + required: + - compatible + - reg + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun9i-a80-mod0-clk + + reg: + maxItems: 1 + + clocks: + # On the A80, the PRCM mod0 clocks have 2 parents. + minItems: 2 + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + - | + clk@8001454 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x08001454 0x4>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "r_ir"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml new file mode 100644 index 000000000..4f9a8d44d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Module 1 Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-mod1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-pll2.h> + + clk@1c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml new file mode 100644 index 000000000..52a7b6e71 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Gatable Oscillator Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-osc-clk + + reg: + maxItems: 1 + + clock-frequency: + description: > + Frequency of the main oscillator. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clock-frequency + - clock-output-names + +additionalProperties: false + +examples: + - | + osc24M: clk@1c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml new file mode 100644 index 000000000..b13a1f21d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 CPU PLL + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-pll1-clk + - allwinner,sun6i-a31-pll1-clk + - allwinner,sun8i-a23-pll1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "osc24M"; + }; + + - | + clk@1c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + - | + clk@1c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml new file mode 100644 index 000000000..418d207d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Video PLL + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-pll3-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml new file mode 100644 index 000000000..76ef3f0c7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 DRAM PLL + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The first output is the DRAM clock output, the second is meant + for peripherals on the SoC. + + compatible: + const: allwinner,sun4i-a10-pll5-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 2 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml new file mode 100644 index 000000000..a94c93c90 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Peripheral PLL + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The first output is the SATA clock output, the second is the + regular PLL output, the third is a PLL output at twice the rate. + + compatible: + const: allwinner,sun4i-a10-pll6-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 3 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml new file mode 100644 index 000000000..6646b2a99 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 TCON Channel 0 Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-tcon-ch0-clk + - allwinner,sun4i-a10-tcon-ch1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-tcon-ch0-clk + +then: + required: + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clk@1c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch0-sclk"; + }; + + - | + clk@1c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch1-sclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml new file mode 100644 index 000000000..5103b675e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 USB Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-usb-clk + - allwinner,sun5i-a13-usb-clk + - allwinner,sun6i-a31-usb-clk + - allwinner,sun8i-a23-usb-clk + - allwinner,sun8i-h3-usb-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 2 + maxItems: 8 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-usb-clk + + then: + properties: + clock-output-names: + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun5i-a13-usb-clk + + then: + properties: + clock-output-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-usb-clk + + then: + properties: + clock-output-names: + maxItems: 6 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-usb-clk + + then: + properties: + clock-output-names: + maxItems: 5 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-usb-clk + + then: + properties: + clock-output-names: + maxItems: 8 + +examples: + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_phy"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", + "usb_ohci0", "usb_ohci1", + "usb_ohci2"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", + "usb_hsic_12M", "usb_ohci0"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-h3-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", + "usb_phy2", "usb_phy3", + "usb_ohci0", "usb_ohci1", + "usb_ohci2", "usb_ohci3"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml new file mode 100644 index 000000000..80337e38d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Video Engine Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + "#reset-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-ve-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c2013c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-ve-clk"; + reg = <0x01c2013c 0x4>; + clocks = <&pll4>; + clock-output-names = "ve"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml new file mode 100644 index 000000000..c6a6fbb68 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A13 AHB Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun5i-a13-ahb-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + ahb@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>, <&cpu>, <&pll6 1>; + clock-output-names = "ahb"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml new file mode 100644 index 000000000..7d6a6a34d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Peripheral PLL + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The first output is the regular PLL output, the second is a PLL + output at twice the rate. + + compatible: + const: allwinner,sun6i-a31-pll6-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 2 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml new file mode 100644 index 000000000..b6202de35 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 GMAC TX Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun7i-a20-gmac-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + description: > + The parent clocks shall be fixed rate dummy clocks at 25 MHz and + 125 MHz, respectively. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20164 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c20164 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml new file mode 100644 index 000000000..fde7f7dc3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 Output Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun7i-a20-out-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c201f0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f0 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_a"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml new file mode 100644 index 000000000..70369bd63 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t Display Engine 2/3 Clock Controller + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + oneOf: + - const: allwinner,sun8i-a83t-de2-clk + - const: allwinner,sun8i-h3-de2-clk + - const: allwinner,sun8i-v3s-de2-clk + - const: allwinner,sun50i-a64-de2-clk + - const: allwinner,sun50i-h5-de2-clk + - const: allwinner,sun50i-h6-de3-clk + - items: + - const: allwinner,sun8i-r40-de2-clk + - const: allwinner,sun8i-h3-de2-clk + - items: + - const: allwinner,sun20i-d1-de2-clk + - const: allwinner,sun50i-h5-de2-clk + + reg: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + de2_clocks: clock@1000000 { + compatible = "allwinner,sun8i-h3-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml new file mode 100644 index 000000000..45b9e2c7c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Bus Gates Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the offset of + the bit controlling this particular gate in the register. + + compatible: + const: allwinner,sun8i-h3-bus-gates-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-indices: + minItems: 1 + maxItems: 64 + + clock-output-names: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-indices + - clock-names + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-h3-bus-gates-clk"; + reg = <0x01c20060 0x14>; + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; + clock-names = "ahb1", "ahb2", "apb1", "apb2"; + clock-indices = <5>, <6>, <8>, + <9>, <10>, <13>, + <14>, <17>, <18>, + <19>, <20>, + <21>, <23>, + <24>, <25>, + <26>, <27>, + <28>, <29>, + <30>, <31>, <32>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <52>, <53>, + <54>, <64>, + <65>, <69>, <72>, + <76>, <77>, <78>, + <96>, <97>, <98>, + <112>, <113>, + <114>, <115>, + <116>, <128>, <135>; + clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", + "bus_mmc1", "bus_mmc2", "bus_nand", + "bus_sdram", "bus_gmac", "bus_ts", + "bus_hstimer", "bus_spi0", + "bus_spi1", "bus_otg", + "bus_otg_ehci0", "bus_ehci1", + "bus_ehci2", "bus_ehci3", + "bus_otg_ohci0", "bus_ohci1", + "bus_ohci2", "bus_ohci3", "bus_ve", + "bus_lcd0", "bus_lcd1", "bus_deint", + "bus_csi", "bus_tve", "bus_hdmi", + "bus_de", "bus_gpu", "bus_msgbox", + "bus_spinlock", "bus_codec", + "bus_spdif", "bus_pio", "bus_ths", + "bus_i2s0", "bus_i2s1", "bus_i2s2", + "bus_i2c0", "bus_i2c1", "bus_i2c2", + "bus_uart0", "bus_uart1", + "bus_uart2", "bus_uart3", + "bus_scr", "bus_ephy", "bus_dbg"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml new file mode 100644 index 000000000..f0f65af8a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 AHB Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-ahb-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@6000060 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000060 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb0"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml new file mode 100644 index 000000000..e9f9bc8f5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 APB0 Bus Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun9i-a80-apb0-clk + - allwinner,sun9i-a80-apb1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@6000070 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb0-clk"; + reg = <0x06000070 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb0"; + }; + + - | + clk@6000074 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb1-clk"; + reg = <0x06000074 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml new file mode 100644 index 000000000..c48db2d49 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 CPUS Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-cpus-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@8001410 { + compatible = "allwinner,sun9i-a80-cpus-clk"; + reg = <0x08001410 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clock-output-names = "cpus"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml new file mode 100644 index 000000000..e9f81a343 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 Display Engine Clock Controller + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-de-clks + + reg: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: RAM Bus Clock + - description: Module Clock + + clock-names: + items: + - const: mod + - const: dram + - const: bus + + resets: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun9i-a80-ccu.h> + #include <dt-bindings/reset/sun9i-a80-ccu.h> + + de_clocks: clock@3000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>; + clock-names = "mod", "dram", "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml new file mode 100644 index 000000000..d3ce5eb18 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 GT Bus Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-gt-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@600005c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x0600005c 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "gt"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml new file mode 100644 index 000000000..65ee5afe8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 MMC Configuration Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +description: > + There is one clock/reset output per mmc controller. The number of + outputs is determined by the size of the address block, which is + related to the overall mmc block. + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-mmc-config-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-output-names: + maxItems: 4 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c13000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-config-clk"; + reg = <0x01c13000 0x10>; + clocks = <&ahb0_gates 8>; + resets = <&ahb0_resets 8>; + clock-output-names = "mmc0_config", "mmc1_config", + "mmc2_config", "mmc3_config"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml new file mode 100644 index 000000000..261264a8a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 Peripheral PLL + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-pll4-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@600000c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600000c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml new file mode 100644 index 000000000..515c15d5f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB Clock Controller + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-usb-clks + + reg: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: High Frequency Oscillator + + clock-names: + items: + - const: bus + - const: hosc + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun9i-a80-ccu.h> + + usb_clocks: clock@a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml new file mode 100644 index 000000000..3f7b8d951 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB Module Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-usb-mod-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 6 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@a08000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-mod-clk"; + reg = <0x00a08000 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb0_ahb", "usb_ohci0", + "usb1_ahb", "usb_ohci1", + "usb2_ahb", "usb_ohci2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml new file mode 100644 index 000000000..0d49072d4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB PHY Clock + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-usb-phy-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 6 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@a08004 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-phy-clk"; + reg = <0x00a08004 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb_phy0", "usb_hsic1_480M", + "usb_phy1", "usb_hsic2_480M", + "usb_phy2", "usb_hsic_12M"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt new file mode 100644 index 000000000..b3205b21c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt @@ -0,0 +1,114 @@ +Alphascale Clock Controller + +The ACC (Alphascale Clock Controller) is responsible of choising proper +clock source, setting deviders and clock gates. + +Required properties for the ACC node: + - compatible: must be "alphascale,asm9260-clock-controller" + - reg: must contain the ACC register base and size + - #clock-cells : shall be set to 1. + +Simple one-cell clock specifier format is used, where the only cell is used +as an index of the clock inside the provider. +It is encouraged to use dt-binding for clock index definitions. SoC specific +dt-binding should be included to the device tree descriptor. For example +Alphascale ASM9260: +#include <dt-bindings/clock/alphascale,asm9260.h> + +This binding contains two types of clock providers: + _AHB_ - AHB gate; + _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider. +All clock specific details can be found in the SoC documentation. +CLKID_AHB_ROM 0 +CLKID_AHB_RAM 1 +CLKID_AHB_GPIO 2 +CLKID_AHB_MAC 3 +CLKID_AHB_EMI 4 +CLKID_AHB_USB0 5 +CLKID_AHB_USB1 6 +CLKID_AHB_DMA0 7 +CLKID_AHB_DMA1 8 +CLKID_AHB_UART0 9 +CLKID_AHB_UART1 10 +CLKID_AHB_UART2 11 +CLKID_AHB_UART3 12 +CLKID_AHB_UART4 13 +CLKID_AHB_UART5 14 +CLKID_AHB_UART6 15 +CLKID_AHB_UART7 16 +CLKID_AHB_UART8 17 +CLKID_AHB_UART9 18 +CLKID_AHB_I2S0 19 +CLKID_AHB_I2C0 20 +CLKID_AHB_I2C1 21 +CLKID_AHB_SSP0 22 +CLKID_AHB_IOCONFIG 23 +CLKID_AHB_WDT 24 +CLKID_AHB_CAN0 25 +CLKID_AHB_CAN1 26 +CLKID_AHB_MPWM 27 +CLKID_AHB_SPI0 28 +CLKID_AHB_SPI1 29 +CLKID_AHB_QEI 30 +CLKID_AHB_QUADSPI0 31 +CLKID_AHB_CAMIF 32 +CLKID_AHB_LCDIF 33 +CLKID_AHB_TIMER0 34 +CLKID_AHB_TIMER1 35 +CLKID_AHB_TIMER2 36 +CLKID_AHB_TIMER3 37 +CLKID_AHB_IRQ 38 +CLKID_AHB_RTC 39 +CLKID_AHB_NAND 40 +CLKID_AHB_ADC0 41 +CLKID_AHB_LED 42 +CLKID_AHB_DAC0 43 +CLKID_AHB_LCD 44 +CLKID_AHB_I2S1 45 +CLKID_AHB_MAC1 46 + +CLKID_SYS_CPU 47 +CLKID_SYS_AHB 48 +CLKID_SYS_I2S0M 49 +CLKID_SYS_I2S0S 50 +CLKID_SYS_I2S1M 51 +CLKID_SYS_I2S1S 52 +CLKID_SYS_UART0 53 +CLKID_SYS_UART1 54 +CLKID_SYS_UART2 55 +CLKID_SYS_UART3 56 +CLKID_SYS_UART4 56 +CLKID_SYS_UART5 57 +CLKID_SYS_UART6 58 +CLKID_SYS_UART7 59 +CLKID_SYS_UART8 60 +CLKID_SYS_UART9 61 +CLKID_SYS_SPI0 62 +CLKID_SYS_SPI1 63 +CLKID_SYS_QUADSPI 64 +CLKID_SYS_SSP0 65 +CLKID_SYS_NAND 66 +CLKID_SYS_TRACE 67 +CLKID_SYS_CAMM 68 +CLKID_SYS_WDT 69 +CLKID_SYS_CLKOUT 70 +CLKID_SYS_MAC 71 +CLKID_SYS_LCD 72 +CLKID_SYS_ADCANA 73 + +Example of clock consumer with _SYS_ and _AHB_ sinks. +uart4: serial@80010000 { + compatible = "alphascale,asm9260-uart"; + reg = <0x80010000 0x4000>; + clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>; + interrupts = <19>; +}; + +Clock consumer with only one, _AHB_ sink. +timer0: timer@80088000 { + compatible = "alphascale,asm9260-timer"; + reg = <0x80088000 0x4000>; + clocks = <&acc CLKID_AHB_TIMER0>; + interrupts = <29>; +}; + diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt new file mode 100644 index 000000000..f72e80e0d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt @@ -0,0 +1,30 @@ +Device Tree Clock bindings for Altera's SoCFPGA platform + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "altr,socfpga-pll-clock" - for a PLL clock + "altr,socfpga-perip-clock" - The peripheral clock divided from the + PLL clock. + "altr,socfpga-gate-clk" - Clocks that directly feed peripherals and + can get gated. + +- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock. +- clocks : shall be the input parent clock phandle for the clock. This is + either an oscillator or a pll output. +- #clock-cells : from common clock binding, shall be set to 0. + +Optional properties: +- fixed-divider : If clocks have a fixed divider value, use this property. +- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register + and the bit index. +- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains + the divider register, bit shift, and width. +- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls + the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second + value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct + hold/delay times that is needed for the SD/MMC CIU clock. The values of both + can be 0-315 degrees, in 45 degree increments. diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt new file mode 100644 index 000000000..3a8948c04 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt @@ -0,0 +1,59 @@ +* Amlogic AXG Audio Clock Controllers + +The Amlogic AXG audio clock controller generates and supplies clock to the +other elements of the audio subsystem, such as fifos, i2s, spdif and pdm +devices. + +Required Properties: + +- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D, + "amlogic,g12a-audio-clkc" for G12A, + "amlogic,sm1-audio-clkc" for S905X3. +- reg : physical base address of the clock controller and length of + memory mapped region. +- clocks : a list of phandle + clock-specifier pairs for the clocks listed + in clock-names. +- clock-names : must contain the following: + * "pclk" - Main peripheral bus clock + may contain the following: + * "mst_in[0-7]" - 8 input plls to generate clock signals + * "slv_sclk[0-9]" - 10 slave bit clocks provided by external + components. + * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external + components. +- resets : phandle of the internal reset line +- #clock-cells : should be 1. +- #reset-cells : should be 1 on the g12a (and following) soc family + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be +used in device tree sources. + +Example: + +clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + resets = <&reset RESET_AUDIO>; +}; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt new file mode 100644 index 000000000..c41f0be5d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -0,0 +1,64 @@ +* Amlogic GXBB AO Clock and Reset Unit + +The Amlogic GXBB AO clock controller generates and supplies clock to various +controllers within the Always-On part of the SoC. + +Required Properties: + +- compatible: value should be different for each SoC family as : + - GXBB (S905) : "amlogic,meson-gxbb-aoclkc" + - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc" + - GXM (S912) : "amlogic,meson-gxm-aoclkc" + - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" + - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc" + followed by the common "amlogic,meson-gx-aoclkc" +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "xtal" : the platform xtal + * "mpeg-clk" : the main clock controller mother clock (aka clk81) + * "ext-32k-0" : external 32kHz reference #0 if any (optional) + * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only) + * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only) + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be +used in device tree sources. + +- #reset-cells: should be 1. + +Each reset is assigned an identifier and client nodes can use this identifier +to specify the reset which they consume. All available resets are defined as +preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be +used in device tree sources. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: AO Clock controller node: + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; + }; + +Example: UART controller node that consumes the clock and reset generated + by the clock controller: + + uart_AO: serial@4c0 { + compatible = "amlogic,meson-uart"; + reg = <0x4c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clkc_AO CLKID_AO_UART1>; + resets = <&clkc_AO RESET_AO_UART1>; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt new file mode 100644 index 000000000..7ccecd5c0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -0,0 +1,53 @@ +* Amlogic GXBB Clock and Reset Unit + +The Amlogic GXBB clock controller generates and supplies clock to various +controllers within the SoC. + +Required Properties: + +- compatible: should be: + "amlogic,gxbb-clkc" for GXBB SoC, + "amlogic,gxl-clkc" for GXL and GXM SoC, + "amlogic,axg-clkc" for AXG SoC. + "amlogic,g12a-clkc" for G12A SoC. + "amlogic,g12b-clkc" for G12B SoC. + "amlogic,sm1-clkc" for SM1 SoC. +- clocks : list of clock phandle, one for each entry clock-names. +- clock-names : should contain the following: + * "xtal": the platform xtal + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be +used in device tree sources. + +Parent node should have the following properties : +- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or + "amlogic,meson-axg-hhi-sysctrl" +- reg: base address and size of the HHI system control register space. + +Example: Clock controller node: + +sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + #clock-cells = <1>; + compatible = "amlogic,gxbb-clkc"; + clocks = <&xtal>; + clock-names = "xtal"; + }; +}; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml new file mode 100644 index 000000000..d98d95d8e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic DDR Clock Controller + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +properties: + compatible: + enum: + - amlogic,meson8-ddr-clkc + - amlogic,meson8b-ddr-clkc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + ddr_clkc: clock-controller@400 { + compatible = "amlogic,meson8-ddr-clkc"; + reg = <0x400 0x20>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt new file mode 100644 index 000000000..cc51e4746 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -0,0 +1,51 @@ +* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit + +The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and +supplies clock to various controllers within the SoC. + +Required Properties: + +- compatible: must be one of: + - "amlogic,meson8-clkc" for Meson8 (S802) SoCs + - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs + - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs +- #clock-cells: should be 1. +- #reset-cells: should be 1. +- clocks: list of clock phandles, one for each entry in clock-names +- clock-names: should contain the following: + * "xtal": the 24MHz system oscillator + * "ddr_pll": the DDR PLL clock + * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN) + +Parent node should have the following properties : +- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" +- reg: base address and size of the HHI system control register space. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be +used in device tree sources. + +Similarly a preprocessor macro for each reset line is defined in +dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the +device tree sources). + + +Example: Clock controller node: + + clkc: clock-controller { + compatible = "amlogic,meson8b-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + }; diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml new file mode 100644 index 000000000..74eab5c0d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/apple,nco.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoCs' NCO block + +maintainers: + - Martin Povišer <povik+lin@cutebit.org> + +description: | + The NCO (Numerically Controlled Oscillator) block found on Apple SoCs + such as the t8103 (M1) is a programmable clock generator performing + fractional division of a high frequency input clock. + + It carries a number of independent channels and is typically used for + generation of audio bitclocks. + +properties: + compatible: + items: + - enum: + - apple,t6000-nco + - apple,t8103-nco + - const: apple,nco + + clocks: + description: + Specifies the reference clock from which the output clocks + are derived through fractional division. + maxItems: 1 + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + nco_clkref: clock-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <900000000>; + clock-output-names = "nco-ref"; + }; + + nco: clock-controller@23b044000 { + compatible = "apple,t8103-nco", "apple,nco"; + reg = <0x3b044000 0x14000>; + #clock-cells = <1>; + clocks = <&nco_clkref>; + }; diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml new file mode 100644 index 000000000..90eadf686 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System Controller ICST Clocks + +maintainers: + - Linus Walleij <linusw@kernel.org> + +description: | + The ICS525 and ICS307 oscillators are produced by Integrated + Devices Technology (IDT). ARM integrated these oscillators deeply into their + reference designs by adding special control registers that manage such + oscillators to their system controllers. + + The various ARM system controllers contain logic to serialize and initialize + an ICST clock request after a write to the 32 bit register at an offset + into the system controller. Furthermore, to even be able to alter one of + these frequencies, the system controller must first be unlocked by + writing a special token to another offset in the system controller. + + Some ARM hardware contain special versions of the serial interface that only + connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to + different values and sometimes also hard-wires the output divider. They + therefore have special compatible strings as per this table (the OD value is + the value on the pins, not the resulting output divider). + + In the core modules and logic tiles, the ICST is a configurable clock fed + from a 24 MHz clock on the motherboard (usually the main crystal) used for + generating e.g. video clocks. It is located on the core module and there is + only one of these. This clock node must be a subnode of the core module. + + Hardware variant RDW OD VDW + + Integrator/AP 22 1 Bit 8 0, rest variable + integratorap-cm + + Integrator/AP 46 3 Bit 8 0, rest variable + integratorap-sys + + Integrator/AP 22 or 1 17 or (33 or 25 MHz) + integratorap-pci 14 1 14 + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-core + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-mem + + The ICST oscillator must be provided inside a system controller node. + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - arm,syscon-icst525 + - arm,syscon-icst307 + - arm,syscon-icst525-integratorap-cm + - arm,syscon-icst525-integratorap-sys + - arm,syscon-icst525-integratorap-pci + - arm,syscon-icst525-integratorcp-cm-core + - arm,syscon-icst525-integratorcp-cm-mem + - arm,integrator-cm-auxosc + - arm,versatile-cm-auxosc + - arm,impd1-vco1 + - arm,impd1-vco2 + + reg: + maxItems: 1 + description: The VCO register + + clocks: + description: Parent clock for the ICST VCO + maxItems: 1 + + clock-output-names: + maxItems: 1 + + lock-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the unlocking register for the oscillator + + vco-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the VCO register for the oscillator + deprecated: true + +required: + - "#clock-cells" + - compatible + - clocks + +additionalProperties: false + +examples: + - | + vco1: clock { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt new file mode 100644 index 000000000..fbf58c443 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt @@ -0,0 +1,71 @@ +* Peripheral Clock bindings for Marvell Armada 37xx SoCs + +Marvell Armada 37xx SoCs provide peripheral clocks which are +used as clock source for the peripheral of the SoC. + +There are two different blocks associated to north bridge and south +bridge. + +The peripheral clock consumer should specify the desired clock by +having the clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs for Armada 3700 North bridge clocks: +ID Clock name Description +----------------------------------- +0 mmc MMC controller +1 sata_host Sata Host +2 sec_at Security AT +3 sac_dap Security DAP +4 tsecm Security Engine +5 setm_tmx Serial Embedded Trace Module +6 avs Adaptive Voltage Scaling +7 sqf SPI +8 pwm PWM +9 i2c_2 I2C 2 +10 i2c_1 I2C 1 +11 ddr_phy DDR PHY +12 ddr_fclk DDR F clock +13 trace Trace +14 counter Counter +15 eip97 EIP 97 +16 cpu CPU + +The following is a list of provided IDs for Armada 3700 South bridge clocks: +ID Clock name Description +----------------------------------- +0 gbe-50 50 MHz parent clock for Gigabit Ethernet +1 gbe-core parent clock for Gigabit Ethernet core +2 gbe-125 125 MHz parent clock for Gigabit Ethernet +3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1 +4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0 +5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1 +6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0 +7 gbe1-core Gigabit Ethernet core port 1 +8 gbe0-core Gigabit Ethernet core port 0 +9 gbe-bm Gigabit Ethernet Buffer Manager +10 sdio SDIO +11 usb32-sub2-sys USB 2 clock +12 usb32-ss-sys USB 3 clock +13 pcie PCIe controller + +Required properties: + +- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the + north bridge block, or + "marvell,armada-3700-periph-clock-sb" for the south bridge block +- reg : must be the register address of North/South Bridge Clock register +- #clock-cells : from common clock binding; shall be set to 1 + +- clocks : list of the parent clock phandle in the following order: + TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock. + + +Example: + +nb_perih_clk: nb-periph-clk@13000{ + compatible = "marvell,armada-3700-periph-clock-nb"; + reg = <0x13000 0x1000>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt new file mode 100644 index 000000000..ed1df32c5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt @@ -0,0 +1,27 @@ +* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs + +Marvell Armada 37xx SoCs provide Time Base Generator clocks which are +used as parent clocks for the peripheral clocks. + +The TBG clock consumer should specify the desired clock by having the +clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs and clock names on Armada 3700: + 0 = TBG A P + 1 = TBG B P + 2 = TBG A S + 3 = TBG B S + +Required properties: +- compatible : shall be "marvell,armada-3700-tbg-clock" +- reg : must be the register address of North Bridge PLL register +- #clock-cells : from common clock binding; shall be set to 1 + +Example: + +tbg: tbg@13200 { + compatible = "marvell,armada-3700-tbg-clock"; + reg = <0x13200 0x1000>; + clocks = <&xtalclk>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt new file mode 100644 index 000000000..4c0807f28 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt @@ -0,0 +1,29 @@ +* Xtal Clock bindings for Marvell Armada 37xx SoCs + +Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by +reading the gpio latch register. + +This node must be a subnode of the node exposing the register address +of the GPIO block where the gpio latch is located. +See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt + +Required properties: +- compatible : shall be one of the following: + "marvell,armada-3700-xtal-clock" +- #clock-cells : from common clock binding; shall be set to 0 + +Optional properties: +- clock-output-names : from common clock binding; allows overwrite default clock + output names ("xtal") + +Example: +pinctrl_nb: pinctrl-nb@13800 { + compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd"; + reg = <0x13800 0x100>, <0x13C00 0x20>; + + xtalclk: xtal-clk { + compatible = "marvell,armada-3700-xtal-clock"; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt new file mode 100644 index 000000000..dff9cdf00 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/artpec6.txt @@ -0,0 +1,41 @@ +* Clock bindings for Axis ARTPEC-6 chip + +The bindings are based on the clock provider binding in +Documentation/devicetree/bindings/clock/clock-bindings.txt + +External clocks: +---------------- + +There are two external inputs to the main clock controller which should be +provided using the common clock bindings. +- "sys_refclk": External 50 Mhz oscillator (required) +- "i2s_refclk": Alternate audio reference clock (optional). + +Main clock controller +--------------------- + +Required properties: +- #clock-cells: Should be <1> + See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers. +- compatible: Should be "axis,artpec6-clkctrl" +- reg: Must contain the base address and length of the system controller +- clocks: Must contain a phandle entry for each clock in clock-names +- clock-names: Must include the external oscillator ("sys_refclk"). Optional + ones are the audio reference clock ("i2s_refclk") and the audio fractional + dividers ("frac_clk0" and "frac_clk1"). + +Examples: + +ext_clk: ext_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; +}; + +clkctrl: clkctrl@f8000000 { + #clock-cells = <1>; + compatible = "axis,artpec6-clkctrl"; + reg = <0xf8000000 0x48>; + clocks = <&ext_clk>; + clock-names = "sys_refclk"; +}; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt new file mode 100644 index 000000000..13f45db3b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -0,0 +1,58 @@ +Device Tree Clock bindings for arch-at91 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Slow Clock controller: + +Required properties: +- compatible : shall be one of the following: + "atmel,at91sam9x5-sckc", + "atmel,sama5d3-sckc", + "atmel,sama5d4-sckc" or + "microchip,sam9x60-sckc": + at91 SCKC (Slow Clock Controller) +- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0. +- clocks : shall be the input parent clock phandle for the clock. + +Optional properties: +- atmel,osc-bypass : boolean property. Set this when a clock signal is directly + provided on XIN. + +For example: + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <0>; + }; + +Power Management Controller (PMC): + +Required properties: +- compatible : shall be "atmel,<chip>-pmc", "syscon" or + "microchip,sam9x60-pmc" + <chip> can be: at91rm9200, at91sam9260, at91sam9261, + at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, + at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5, + sama5d2, sama5d3 or sama5d4. +- #clock-cells : from common clock binding; shall be set to 2. The first entry + is the type of the clock (core, system, peripheral or generated) and the + second entry its index as provided by the datasheet +- clocks : Must contain an entry for each entry in clock-names. +- clock-names: Must include the following entries: "slow_clk", "main_xtal" + +Optional properties: +- atmel,osc-bypass : boolean property. Set this when a clock signal is directly + provided on XIN. + +For example: + pmc: pmc@f0018000 { + compatible = "atmel,sama5d4-pmc", "syscon"; + reg = <0xf0018000 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; + }; diff --git a/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt new file mode 100644 index 000000000..5ffc8df7e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt @@ -0,0 +1,25 @@ +Binding for the AXS10X I2S PLL clock + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: shall be "snps,axs10x-i2s-pll-clock" +- reg : address and length of the I2S PLL register set. +- clocks: shall be the input parent clock phandle for the PLL. +- #clock-cells: from common clock binding; Should always be set to 0. + +Example: + pll_clock: pll_clock { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + i2s_clock@100a0 { + compatible = "snps,axs10x-i2s-pll-clock"; + reg = <0x100a0 0x10>; + clocks = <&pll_clock>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml new file mode 100644 index 000000000..bd4cefbb1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 Clock Control Unit Dividers + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Clocks Control Unit is the core of Baikal-T1 SoC System Controller + responsible for the chip subsystems clocking and resetting. The CCU is + connected with an external fixed rate oscillator, which signal is transformed + into clocks of various frequencies and then propagated to either individual + IP-blocks or to groups of blocks (clock domains). The transformation is done + by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The + later ones are described in this binding. Each clock domain can be also + individually reset by using the domain clocks divider configuration + registers. Baikal-T1 CCU is logically divided into the next components: + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but + in general can provide any frequency supported by the CCU PLLs). + 2) PLLs clocks generators (PLLs). + 3) AXI-bus clock dividers (AXI) - described in this binding file. + 4) System devices reference clock dividers (SYS) - described in this binding + file. + which are connected with each other as shown on the next figure: + + +---------------+ + | Baikal-T1 CCU | + | +----+------|- MIPS P5600 cores + | +-|PLLs|------|- DDR controller + | | +----+ | + +----+ | | | | | + |XTAL|--|-+ | | +---+-| + +----+ | | | +-|AXI|-|- AXI-bus + | | | +---+-| + | | | | + | | +----+---+-|- APB-bus + | +-------|SYS|-|- Low-speed Devices + | +---+-|- High-speed Devices + +---------------+ + + Each sub-block is represented as a separate DT node and has an individual + driver to be bound with. + + In order to create signals of wide range frequencies the external oscillator + output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are + then passed over CCU dividers to create signals required for the target clock + domain (like AXI-bus or System Device consumers). The dividers have the + following structure: + + +--------------+ + CLKIN --|->+----+ 1|\ | + SETCLK--|--|/DIV|->| | | + CLKDIV--|--| | | |-|->CLKLOUT + LOCK----|--+----+ | | | + | |/ | + | | | + EN------|-----------+ | + RST-----|--------------|->RSTOUT + +--------------+ + + where CLKIN is the reference clock coming either from CCU PLLs or from an + external clock oscillator, SETCLK - a command to update the output clock in + accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of + the output clock stabilization, EN - enable/disable the divider block, + RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core + peculiarities the dividers may lack of some functionality depicted on the + figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding + clock provider just doesn't expose either switching functions, or the rate + configuration, or both of them. + + The clock dividers, which output clock is then consumed by the SoC individual + devices, are united into a single clocks provider called System Devices CCU. + Similarly the dividers with output clocks utilized as AXI-bus reference clocks + are called AXI-bus CCU. Both of them use the common clock bindings with no + custom properties. The list of exported clocks and reset signals can be found + in the files: 'include/dt-bindings/clock/bt1-ccu.h' and + 'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU + are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed + to be a children of later one. + +if: + properties: + compatible: + contains: + const: baikal,bt1-ccu-axi + +then: + properties: + clocks: + items: + - description: CCU SATA PLL output clock + - description: CCU PCIe PLL output clock + - description: CCU Ethernet PLL output clock + + clock-names: + items: + - const: sata_clk + - const: pcie_clk + - const: eth_clk + +else: + properties: + clocks: + items: + - description: External reference clock + - description: CCU SATA PLL output clock + - description: CCU PCIe PLL output clock + - description: CCU Ethernet PLL output clock + + clock-names: + items: + - const: ref_clk + - const: sata_clk + - const: pcie_clk + - const: eth_clk + +properties: + compatible: + enum: + - baikal,bt1-ccu-axi + - baikal,bt1-ccu-sys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: true + + clock-names: true + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +examples: + # AXI-bus Clock Control Unit node: + - | + #include <dt-bindings/clock/bt1-ccu.h> + + clock-controller@1f04d030 { + compatible = "baikal,bt1-ccu-axi"; + reg = <0x1f04d030 0x030>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&ccu_pll CCU_SATA_PLL>, + <&ccu_pll CCU_PCIE_PLL>, + <&ccu_pll CCU_ETH_PLL>; + clock-names = "sata_clk", "pcie_clk", "eth_clk"; + }; + # System Devices Clock Control Unit node: + - | + #include <dt-bindings/clock/bt1-ccu.h> + + clock-controller@1f04d060 { + compatible = "baikal,bt1-ccu-sys"; + reg = <0x1f04d060 0x0a0>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clk25m>, + <&ccu_pll CCU_SATA_PLL>, + <&ccu_pll CCU_PCIE_PLL>, + <&ccu_pll CCU_ETH_PLL>; + clock-names = "ref_clk", "sata_clk", "pcie_clk", + "eth_clk"; + }; + # Required Clock Control Unit PLL node: + - | + ccu_pll: clock-controller@1f04d000 { + compatible = "baikal,bt1-ccu-pll"; + reg = <0x1f04d000 0x028>; + #clock-cells = <1>; + + clocks = <&clk25m>; + clock-names = "ref_clk"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml new file mode 100644 index 000000000..624984d51 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 Clock Control Unit PLL + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Clocks Control Unit is the core of Baikal-T1 SoC System Controller + responsible for the chip subsystems clocking and resetting. The CCU is + connected with an external fixed rate oscillator, which signal is transformed + into clocks of various frequencies and then propagated to either individual + IP-blocks or to groups of blocks (clock domains). The transformation is done + by means of PLLs and gateable/non-gateable dividers embedded into the CCU. + It's logically divided into the next components: + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but + in general can provide any frequency supported by the CCU PLLs). + 2) PLLs clocks generators (PLLs) - described in this binding file. + 3) AXI-bus clock dividers (AXI). + 4) System devices reference clock dividers (SYS). + which are connected with each other as shown on the next figure: + + +---------------+ + | Baikal-T1 CCU | + | +----+------|- MIPS P5600 cores + | +-|PLLs|------|- DDR controller + | | +----+ | + +----+ | | | | | + |XTAL|--|-+ | | +---+-| + +----+ | | | +-|AXI|-|- AXI-bus + | | | +---+-| + | | | | + | | +----+---+-|- APB-bus + | +-------|SYS|-|- Low-speed Devices + | +---+-|- High-speed Devices + +---------------+ + + Each CCU sub-block is represented as a separate dts-node and has an + individual driver to be bound with. + + In order to create signals of wide range frequencies the external oscillator + output is primarily connected to a set of CCU PLLs. There are five PLLs + to create a clock for the MIPS P5600 cores, the embedded DDR controller, + SATA, Ethernet and PCIe domains. The last three domains though named by the + biggest system interfaces in fact include nearly all of the rest SoC + peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core + with an interface wrapper (so called safe PLL' clocks switcher) to simplify + the PLL configuration procedure. The PLLs work as depicted on the next + diagram: + + +--------------------------+ + | | + +-->+---+ +---+ +---+ | +---+ 0|\ + CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| | + +---+ +->+---+ +---+ /->+---+ | |--->CLKOUT + CLKOD---------C----------------+ 1| | + +--------C--------------------------->|/ + | | ^ + Rclk-+->+---+ | | + CLKR--->|/NR|-+ | + +---+ | + BYPASS--------------------------------------+ + BWADJ---> + + where Rclk is the reference clock coming from XTAL, NR - reference clock + divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT - + output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment + the binding supports the PLL dividers configuration in accordance with a + requested rate, while bypassing and bandwidth adjustment settings can be + added in future if it gets to be necessary. + + The PLLs CLKOUT is then either directly connected with the corresponding + clocks consumer (like P5600 cores or DDR controller) or passed over a CCU + divider to create a signal required for the clock domain. + + The CCU PLL dts-node uses the common clock bindings with no custom + parameters. The list of exported clocks can be found in + 'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the + Baikal-T1 SoC System Controller its DT node is supposed to be a child of + later one. + +properties: + compatible: + const: baikal,bt1-ccu-pll + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + description: External reference clock + maxItems: 1 + + clock-names: + const: ref_clk + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +examples: + # Clock Control Unit PLL node: + - | + clock-controller@1f04d000 { + compatible = "baikal,bt1-ccu-pll"; + reg = <0x1f04d000 0x028>; + #clock-cells = <1>; + + clocks = <&clk25m>; + clock-names = "ref_clk"; + }; + # Required external oscillator: + - | + clk25m: clock-oscillator-25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "clk25m"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml new file mode 100644 index 000000000..f0f939247 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/bitmain,bm1880-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bitmain BM1880 Clock Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + The Bitmain BM1880 clock controller generates and supplies clock to + various peripherals within the SoC. + + This binding uses common clock bindings + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +properties: + compatible: + const: bitmain,bm1880-clk + + reg: + items: + - description: pll registers + - description: system registers + + reg-names: + items: + - const: pll + - const: sys + + clocks: + maxItems: 1 + + clock-names: + const: osc + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock controller node: + - | + clk: clock-controller@e8 { + compatible = "bitmain,bm1880-clk"; + reg = <0xe8 0x0c>, <0x800 0xb0>; + reg-names = "pll", "sys"; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml new file mode 100644 index 000000000..2d40df2d3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711 HDMI DVP + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + const: brcm,brcm2711-dvp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + dvp: clock@7ef00000 { + compatible = "brcm,brcm2711-dvp"; + reg = <0x7ef00000 0x10>; + clocks = <&clk_108MHz>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt new file mode 100644 index 000000000..4acfc8f64 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt @@ -0,0 +1,31 @@ +Broadcom BCM2835 auxiliary peripheral support + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The auxiliary peripherals (UART, SPI1, and SPI2) have a small register +area controlling clock gating to the peripherals, and providing an IRQ +status register. + +Required properties: +- compatible: Should be "brcm,bcm2835-aux" +- #clock-cells: Should be <1>. The permitted clock-specifier values can be + found in include/dt-bindings/clock/bcm2835-aux.h +- reg: Specifies base physical address and size of the registers +- clocks: The parent clock phandle + +Example: + + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + clocks = <&clk_osc>; + }; + + aux: aux@7e215004 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; + reg = <0x7e215000 0x8>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + }; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt new file mode 100644 index 000000000..9e0b03a65 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -0,0 +1,60 @@ +Broadcom BCM2835 CPRMAN clocks + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CPRMAN clock controller generates clocks in the audio power domain +of the BCM2835. There is a level of PLLs deriving from an external +oscillator, a level of PLL dividers that produce channels off of the +few PLLs, and a level of mostly-generic clock generators sourcing from +the PLL channels. Most other hardware components source from the +clock generators, but a few (like the ARM or HDMI) will source from +the PLL dividers directly. + +Required properties: +- compatible: should be one of the following, + "brcm,bcm2711-cprman" + "brcm,bcm2835-cprman" +- #clock-cells: Should be <1>. The permitted clock-specifier values can be + found in include/dt-bindings/clock/bcm2835.h +- reg: Specifies base physical address and size of the registers +- clocks: phandles to the parent clocks used as input to the module, in + the following order: + + - External oscillator + - DSI0 byte clock + - DSI0 DDR2 clock + - DSI0 DDR clock + - DSI1 byte clock + - DSI1 DDR2 clock + - DSI1 DDR clock + + Only external oscillator is required. The DSI clocks may + not be present, in which case their children will be + unusable. + +Example: + + clk_osc: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <19200000>; + }; + + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + clocks = <&clk_osc>; + }; + + i2c0: i2c@7e205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt new file mode 100644 index 000000000..2ebb10733 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt @@ -0,0 +1,36 @@ +Broadcom BCM53573 ILP clock +=========================== + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +This binding is used for ILP clock (sometimes referred as "slow clock") +on Broadcom BCM53573 devices using Cortex-A7 CPU. + +ILP's rate has to be calculated on runtime and it depends on ALP clock +which has to be referenced. + +This clock is part of PMU (Power Management Unit), a Broadcom's device +handing power-related aspects. Its node must be sub-node of the PMU +device. + +Required properties: +- compatible: "brcm,bcm53573-ilp" +- clocks: has to reference an ALP clock +- #clock-cells: should be <0> +- clock-output-names: from common clock bindings, should contain clock + name + +Example: + +pmu@18012000 { + compatible = "simple-mfd", "syscon"; + reg = <0x18012000 0x00001000>; + + ilp { + compatible = "brcm,bcm53573-ilp"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt new file mode 100644 index 000000000..3e7ca5530 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt @@ -0,0 +1,24 @@ +Gated Clock Controller Bindings for MIPS based BCM63XX SoCs + +Required properties: +- compatible: must be one of: + "brcm,bcm3368-clocks" + "brcm,bcm6318-clocks" + "brcm,bcm6318-ubus-clocks" + "brcm,bcm6328-clocks" + "brcm,bcm6358-clocks" + "brcm,bcm6362-clocks" + "brcm,bcm6368-clocks" + "brcm,bcm63268-clocks" + +- reg: Address and length of the register set +- #clock-cells: must be <1> + + +Example: + +clkctl: clock-controller@10000004 { + compatible = "brcm,bcm6328-clocks"; + reg = <0x10000004 0x4>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml new file mode 100644 index 000000000..5ad147d26 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml @@ -0,0 +1,417 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc Family Clocks + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +description: | + The iProc clock controller manages clocks that are common to the iProc family. + An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL, + LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL + comprises of several leaf clocks + + ASIU clocks are a special case. These clocks are derived directly from the + reference clock of the onboard crystal. + +properties: + compatible: + enum: + - brcm,bcm63138-armpll + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + - brcm,hr2-armpll + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + + reg: + minItems: 1 + items: + - description: base register + - description: power register + - description: ASIU or split status register + + clocks: + description: The input parent clock phandle for the PLL / ASIU clock. For + most iProc PLLs, this is an onboard crystal with a fixed rate. + maxItems: 1 + + '#clock-cells': + true + + clock-output-names: + minItems: 1 + maxItems: 45 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - brcm,cygnus-armpll + - brcm,nsp-armpll + then: + properties: + '#clock-cells': + const: 0 + else: + properties: + '#clock-cells': + const: 1 + required: + - clock-output-names + - if: + properties: + compatible: + contains: + enum: + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Cygnus. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + ----- --------------- ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED + + audiopll crystal 0 BCM_CYGNUS_AUDIOPLL + ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 + ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 + ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 + - if: + properties: + compatible: + contains: + enum: + - brcm,hr2-armpll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + - if: + properties: + compatible: + contains: + enum: + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar and + Northstar Plus. These clock IDs are defined in: + "include/dt-bindings/clock/bcm-nsp.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + genpll crystal 0 BCM_NSP_GENPLL + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK + + lcpll0 crystal 0 BCM_NSP_LCPLL0 + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK + - if: + properties: + compatible: + contains: + enum: + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar 2. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-ns2.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + genpll_scr crystal 0 BCM_NS2_GENPLL_SCR + scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK + fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK + audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK + ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED + ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED + ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED + + genpll_sw crystal 0 BCM_NS2_GENPLL_SW + rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK + 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK + nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK + chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK + port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK + sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK + + lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR + pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK + ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK + ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED + ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED + ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED + ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED + + lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS + wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK + rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK + ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED + ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED + ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED + ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED + - if: + properties: + compatible: + contains: + enum: + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Stingray. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-sr.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + crmu_ref25m crystal N/A N/A + + genpll0 crystal 0 BCM_SR_GENPLL0 + clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK + clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK + clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK + clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK + clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK + clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK + + genpll1 crystal 0 BCM_SR_GENPLL1 + clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK + clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK + + genpll2 crystal 0 BCM_SR_GENPLL2 + clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK + clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK + clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK + clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK + clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK + clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK + + genpll3 crystal 0 BCM_SR_GENPLL3 + clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK + clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK + + genpll4 crystal 0 BCM_SR_GENPLL4 + clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK + clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK + clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK + clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK + clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK + + genpll5 crystal 0 BCM_SR_GENPLL5 + clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK + clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK + clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK + + genpll6 crystal 0 BCM_SR_GENPLL6 + clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK + + lcpll0 crystal 0 BCM_SR_LCPLL0 + clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK + clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK + clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK + clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK + + lcpll1 crystal 0 BCM_SR_LCPLL1 + clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK + clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK + clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK + + lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE + clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK + - if: + properties: + compatible: + contains: + const: brcm,cygnus-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: axi21 + - const: 250mhz + - const: ihost_sys + - const: enet_sw + - const: audio_125 + - const: can + - if: + properties: + compatible: + contains: + const: brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + items: + - const: lcpll0 + - const: pcie_phy + - const: sdio + - const: ddr_phy + - if: + properties: + compatible: + contains: + const: brcm,nsp-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: phy + - const: ethernetclk + - const: usbclk + - const: iprocfast + - const: sata1 + - const: sata2 + +required: + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + osc1: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll@301d000 { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x301d000 0x2c>, <0x301c020 0x4>; + clocks = <&os1c>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + - | + osc2: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks@301d048 { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc2>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; + - | + arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x0 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt new file mode 100644 index 000000000..8e5a7d868 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt @@ -0,0 +1,138 @@ +Broadcom Kona Family Clocks + +This binding is associated with Broadcom SoCs having "Kona" style +clock control units (CCUs). A CCU is a clock provider that manages +a set of clock signals. Each CCU is represented by a node in the +device tree. + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible + Shall have a value of the form "brcm,<model>-<which>-ccu", + where <model> is a Broadcom SoC model number and <which> is + the name of a defined CCU. For example: + "brcm,bcm11351-root-ccu" + The compatible strings used for each supported SoC family + are defined below. +- reg + Shall define the base and range of the address space + containing clock control registers +- #clock-cells + Shall have value <1>. The permitted clock-specifier values + are defined below. +- clock-output-names + Shall be an ordered list of strings defining the names of + the clocks provided by the CCU. + +Device tree example: + + slave_ccu: slave_ccu { + compatible = "brcm,bcm11351-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "uartb4"; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + uart@3e002000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e002000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + +BCM281XX family +--------------- +CCU compatible string values for SoCs in the BCM281XX family are: + "brcm,bcm11351-root-ccu" + "brcm,bcm11351-aon-ccu" + "brcm,bcm11351-hub-ccu" + "brcm,bcm11351-master-ccu" + "brcm,bcm11351-slave-ccu" + +The following table defines the set of CCUs and clock specifiers for +BCM281XX family clocks. When a clock consumer references a clocks, +its symbolic specifier (rather than its numeric index value) should +be used. These specifiers are defined in: + "include/dt-bindings/clock/bcm281xx.h" + + CCU Clock Type Index Specifier + --- ----- ---- ----- --------- + root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M + + aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER + aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC + aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR + + hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M + + master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1 + master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2 + master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3 + master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4 + master dmac peri 4 BCM281XX_MASTER_CCU_DMAC + master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC + master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M + master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M + + slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB + slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2 + slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3 + slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4 + slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0 + slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2 + slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1 + slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2 + slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3 + slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM + + +BCM21664 family +--------------- +CCU compatible string values for SoCs in the BCM21664 family are: + "brcm,bcm21664-root-ccu" + "brcm,bcm21664-aon-ccu" + "brcm,bcm21664-master-ccu" + "brcm,bcm21664-slave-ccu" + +The following table defines the set of CCUs and clock specifiers for +BCM21664 family clocks. When a clock consumer references a clocks, +its symbolic specifier (rather than its numeric index value) should +be used. These specifiers are defined in: + "include/dt-bindings/clock/bcm21664.h" + + CCU Clock Type Index Specifier + --- ----- ---- ----- --------- + root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M + + aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER + + master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1 + master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2 + master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3 + master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4 + master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP + master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP + master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP + master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP + + slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB + slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2 + slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3 + slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4 + slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1 + slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2 + slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3 + slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4 diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml new file mode 100644 index 000000000..a34cbf3c9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/calxeda.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Clock bindings for Calxeda highbank platform + +description: | + This binding covers the Calxeda SoC internal peripheral and bus clocks + as used by peripherals. The clocks live inside the "system register" + region of the SoC, so are typically presented as children of an + "hb-sregs" node. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - calxeda,hb-pll-clock + - calxeda,hb-a9periph-clock + - calxeda,hb-a9bus-clock + - calxeda,hb-emmc-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - clocks + - reg + +additionalProperties: false + +examples: + - | + sregs@3fffc000 { + compatible = "calxeda,hb-sregs"; + reg = <0x3fffc000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll@108 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll@100 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk@104 { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml new file mode 100644 index 000000000..998e5cce6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K210 Clock + +maintainers: + - Damien Le Moal <damien.lemoal@wdc.com> + +description: | + Canaan Kendryte K210 SoC clocks driver bindings. The clock + controller node must be defined as a child node of the K210 + system controller node. + + See also: + - dt-bindings/clock/k210-clk.h + +properties: + compatible: + const: canaan,k210-clk + + clocks: + maxItems: 1 + description: + Phandle of the SoC 26MHz fixed-rate oscillator clock. + + '#clock-cells': + const: 1 + +required: + - compatible + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/k210-clk.h> + clocks { + in0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + /* ... */ + sysclk: clock-controller { + #clock-cells = <1>; + compatible = "canaan,k210-clk"; + clocks = <&in0>; + }; diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml new file mode 100644 index 000000000..82836086c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +description: | + The CS2000-CP is an extremely versatile system clocking device that + utilizes a programmable phase lock loop. + + Link: https://www.cirrus.com/products/cs2000/ + +properties: + compatible: + enum: + - cirrus,cs2000-cp + + clocks: + description: + Common clock binding for CLK_IN, XTI/REF_CLK + maxItems: 2 + + clock-names: + items: + - const: clk_in + - const: ref_clk + + '#clock-cells': + const: 0 + + reg: + maxItems: 1 + + cirrus,aux-output-source: + description: + Specifies the function of the auxiliary clock output pin + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # CS2000CP_AUX_OUTPUT_REF_CLK: ref_clk input + - 1 # CS2000CP_AUX_OUTPUT_CLK_IN: clk_in input + - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT: clk_out output + - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status + default: 0 + + cirrus,clock-skip: + description: + This mode allows the PLL to maintain lock even when CLK_IN + has missing pulses for up to 20 ms. + $ref: /schemas/types.yaml#/definitions/flag + + cirrus,dynamic-mode: + description: + In dynamic mode, the CLK_IN input is used to drive the + digital PLL of the silicon. + If not given, the static mode shall be used to derive the + output signal directly from the REF_CLK input. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cirrus,cs2000-cp.h> + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&rcar_sound 0>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml new file mode 100644 index 000000000..59de12564 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the clock portion of the + driver. + + Also see these documents for generic binding information: + [1] Clock : ../clock/clock-bindings.txt + + And these for relevant defines: + [2] include/dt-bindings/clock/lochnagar.h + + This binding must be part of the Lochnagar MFD binding: + [3] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar1-clk + - cirrus,lochnagar2-clk + + '#clock-cells': + description: + The first cell indicates the clock number, see [2] for available + clocks and [1]. + const: 1 + + clock-names: + items: + enum: + - ln-cdc-clkout # Output clock from CODEC card. + - ln-dsp-clkout # Output clock from DSP card. + - ln-gf-mclk1 # Optional input clock from host system. + - ln-gf-mclk2 # Optional input clock from host system. + - ln-gf-mclk3 # Optional input clock from host system. + - ln-gf-mclk4 # Optional input clock from host system. + - ln-psia1-mclk # Optional input clock from external connector. + - ln-psia2-mclk # Optional input clock from external connector. + - ln-spdif-mclk # Optional input clock from SPDIF. + - ln-spdif-clkout # Optional input clock from SPDIF. + - ln-adat-mclk # Optional input clock from ADAT. + - ln-pmic-32k # On board fixed clock. + - ln-clk-12m # On board fixed clock. + - ln-clk-11m # On board fixed clock. + - ln-clk-24m # On board fixed clock. + - ln-clk-22m # On board fixed clock. + - ln-clk-8m # On board fixed clock. + - ln-usb-clk-24m # On board fixed clock. + - ln-usb-clk-12m # On board fixed clock. + minItems: 1 + maxItems: 19 + + clocks: true + assigned-clocks: true + assigned-clock-parents: true + +additionalProperties: false + +required: + - compatible + - '#clock-cells' diff --git a/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt b/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt new file mode 100644 index 000000000..4208886d8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt @@ -0,0 +1,35 @@ +* Palmas 32KHz clocks * + +Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO. + +This binding uses the common clock binding ./clock-bindings.txt. + +Required properties: +- compatible : "ti,palmas-clk32kg" for clk32kg clock + "ti,palmas-clk32kgaudio" for clk32kgaudio clock +- #clock-cells : shall be set to 0. + +Optional property: +- ti,external-sleep-control: The external enable input pins controlled the + enable/disable of clocks. The external enable input pins ENABLE1, + ENABLE2 and NSLEEP. The valid values for the external pins are: + PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin + PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin + PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin + Option 0 or missing this property means the clock is enabled/disabled + via register access and these pins do not have any control. + The macros of external control pins for DTS is defined at + dt-bindings/mfd/palmas.h + +Example: + #include <dt-bindings/mfd/palmas.h> + ... + palmas: tps65913@58 { + ... + clk32kg: palmas_clk32k@0 { + compatible = "ti,palmas-clk32kg"; + #clock-cells = <0>; + ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt new file mode 100644 index 000000000..6fe541368 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -0,0 +1,2 @@ +This file has moved to the clock binding schema: +https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt new file mode 100644 index 000000000..f1bd53f79 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clps711x-clock.txt @@ -0,0 +1,19 @@ +* Clock bindings for the Cirrus Logic CLPS711X CPUs + +Required properties: +- compatible : Shall contain "cirrus,ep7209-clk". +- reg : Address of the internal register set. +- startup-frequency: Factory set CPU startup frequency in HZ. +- #clock-cells : Should be <1>. + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h +for the full list of CLPS711X clock IDs. + +Example: + clks: clks@80000000 { + #clock-cells = <1>; + compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk"; + reg = <0x80000000 0xc000>; + startup-frequency = <73728000>; + }; diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt new file mode 100644 index 000000000..217871f48 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt @@ -0,0 +1,28 @@ +PLL divider based Dove clocks + +Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide +high speed clocks for a number of peripherals. These dividers are part of +the PMU, and thus this node should be a child of the PMU node. + +The following clocks are provided: + +ID Clock +------------- +0 AXI bus clock +1 GPU clock +2 VMeta clock +3 LCD clock + +Required properties: +- compatible : shall be "marvell,dove-divider-clock" +- reg : shall be the register address of the Core PLL and Clock Divider + Control 0 register. This will cover that register, as well as the + Core PLL and Clock Divider Control 1 register. Thus, it will have + a size of 8. +- #clock-cells : from common clock binding; shall be set to 1 + +divider_clk: core-clock@64 { + compatible = "marvell,dove-divider-clock"; + reg = <0x0064 0x8>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml new file mode 100644 index 000000000..b657ecd0e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed-rate clock sources + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +properties: + compatible: + const: fixed-clock + + "#clock-cells": + const: 0 + + clock-frequency: true + + clock-accuracy: + description: accuracy of clock in ppb (parts per billion). + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clock-frequency + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-accuracy = <100>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml new file mode 100644 index 000000000..0b02378a3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed factor rate clock sources + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +properties: + compatible: + enum: + - fixed-factor-clock + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-div: + description: Fixed divider + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + + clock-mult: + description: Fixed multiplier + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - clocks + - "#clock-cells" + - clock-div + - clock-mult + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml new file mode 100644 index 000000000..1453ac849 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple memory mapped IO fixed-rate clock sources + +description: + This binding describes a fixed-rate clock for which the frequency can + be read from a single 32-bit memory mapped I/O register. + + It was designed for test systems, like FPGA, not for complete, + finished SoCs. + +maintainers: + - Jan Kotas <jank@cadence.com> + +properties: + compatible: + const: fixed-mmio-clock + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + +additionalProperties: false + +examples: + - | + sysclock: sysclock@fd020004 { + compatible = "fixed-mmio-clock"; + #clock-cells = <0>; + reg = <0xfd020004 0x4>; + clock-output-names = "sysclk"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml new file mode 100644 index 000000000..1fa390ee7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,flexspi-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FlexSPI clock driver for Layerscape SoCs + +maintainers: + - Michael Walle <michael@walle.cc> + +description: + The Freescale Layerscape SoCs have a special FlexSPI clock which is + derived from the platform PLL. + +properties: + compatible: + enum: + - fsl,ls1028a-flexspi-clk + - fsl,lx2160a-flexspi-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + dcfg { + #address-cells = <1>; + #size-cells = <1>; + + fspi_clk: clock-controller@900 { + compatible = "fsl,ls1028a-flexspi-clk"; + reg = <0x900 0x4>; + #clock-cells = <0>; + clocks = <&parentclk>; + clock-output-names = "fspi_clk"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml new file mode 100644 index 000000000..9ac716dfa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,plldig.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding + +maintainers: + - Wen He <wen.he_1@nxp.com> + +description: | + NXP LS1028A has a clock domain PXLCLK0 used for the Display output + interface in the display core, as implemented in TSMC CLN28HPM PLL. + which generate and offers pixel clocks to Display. + +properties: + compatible: + const: fsl,ls1028a-plldig + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + fsl,vco-hz: + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Display PIXEL Clock node: + - | + dpclk: clock-display@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0xf1f0000 0xffff>; + #clock-cells = <0>; + clocks = <&osc_27m>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml new file mode 100644 index 000000000..fc3bdfdc0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SAI bitclock-as-a-clock binding + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + It is possible to use the BCLK pin of a SAI module as a generic clock + output. Some SoC are very constrained in their pin multiplexer + configuration. Eg. pins can only be changed groups. For example, on the + LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI, + the second pins are wasted. Using this binding it is possible to use the + clock of the second SAI as a MCLK clock for an audio codec, for example. + + This is a composite of a gated clock and a divider clock. + +properties: + compatible: + const: fsl,vf610-sai-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mclk: clock-mclk@f130080 { + compatible = "fsl,vf610-sai-clock"; + reg = <0x0 0xf130080 0x0 0x80>; + #clock-cells = <0>; + clocks = <&parentclk>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml new file mode 100644 index 000000000..f2c48460a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol + +maintainers: + - Abel Vesa <abel.vesa@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the common clock binding. + (Documentation/devicetree/bindings/clock/clock-bindings.txt) + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from + include/dt-bindings/clock/imx8qxp-clock.h + +properties: + compatible: + items: + - enum: + - fsl,imx8dxl-clk + - fsl,imx8qm-clk + - fsl,imx8qxp-clk + - const: fsl,scu-clk + + '#clock-cells': + const: 2 + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt new file mode 100644 index 000000000..332396265 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt @@ -0,0 +1,26 @@ +Fujitsu CRG11 clock driver bindings +----------------------------------- + +Required properties : +- compatible : Shall contain "fujitsu,mb86s70-crg11" +- #clock-cells : Shall be 3 {cntrlr domain port} + +The consumer specifies the desired clock pointing to its phandle. + +Example: + + clock: crg11 { + compatible = "fujitsu,mb86s70-crg11"; + #clock-cells = <3>; + }; + + mhu: mhu0@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu"; + reg = <0 0x2B1F0000 0x1000>; + interrupts = <0 36 4>, /* LP Non-Sec */ + <0 35 4>, /* HP Non-Sec */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */ + clock-names = "clk"; + }; diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml new file mode 100644 index 000000000..d09d0e3f0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple GPIO clock gate + +maintainers: + - Jyri Sarha <jsarha@ti.com> + +properties: + compatible: + const: gpio-gate-clock + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + enable-gpios: + description: GPIO reference for enabling and disabling the clock. + maxItems: 1 + +required: + - compatible + - '#clock-cells' + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + clock { + compatible = "gpio-gate-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml new file mode 100644 index 000000000..1e21f8b3a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/gpio-mux-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple GPIO clock multiplexer + +maintainers: + - Sergej Sawazki <ce3a@gmx.de> + +properties: + compatible: + const: gpio-mux-clock + + clocks: + items: + - description: First parent clock + - description: Second parent clock + + '#clock-cells': + const: 0 + + select-gpios: + description: GPIO reference for selecting the parent clock. + maxItems: 1 + +required: + - compatible + - clocks + - '#clock-cells' + - select-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + clock { + compatible = "gpio-mux-clock"; + clocks = <&parentclk1>, <&parentclk2>; + #clock-cells = <0>; + select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt new file mode 100644 index 000000000..dad6269f5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt @@ -0,0 +1,20 @@ +* Hisilicon Hi3620 Clock Controller + +The Hi3620 clock controller generates and supplies clock to various +controllers within the Hi3620 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC. + - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt new file mode 100644 index 000000000..946da7cee --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -0,0 +1,47 @@ +* Hisilicon Hi3660 Clock Controller + +The Hi3660 clock controller generates and supplies clock to various +controllers within the Hi3660 SoC. + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi3660-crgctrl" + - "hisilicon,hi3660-pctrl" + - "hisilicon,hi3660-pmuctrl" + - "hisilicon,hi3660-sctrl" + - "hisilicon,hi3660-iomcu" + - "hisilicon,hi3660-stub-clk" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Optional Properties: + +- mboxes: Phandle to the mailbox for sending message to MCU. + (See: ../mailbox/hisilicon,hi3660-mailbox.txt for more info) + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>. + +Examples: + crg_ctrl: clock-controller@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/hi3670-clock.txt b/Documentation/devicetree/bindings/clock/hi3670-clock.txt new file mode 100644 index 000000000..66f3697ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3670-clock.txt @@ -0,0 +1,43 @@ +* Hisilicon Hi3670 Clock Controller + +The Hi3670 clock controller generates and supplies clock to various +controllers within the Hi3670 SoC. + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi3670-crgctrl" + - "hisilicon,hi3670-pctrl" + - "hisilicon,hi3670-pmuctrl" + - "hisilicon,hi3670-sctrl" + - "hisilicon,hi3670-iomcu" + - "hisilicon,hi3670-media1-crg" + - "hisilicon,hi3670-media2-crg" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3670-clock.h>. + +Examples: + crg_ctrl: clock-controller@fff35000 { + compatible = "hisilicon,hi3670-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt new file mode 100644 index 000000000..17ac4a3dd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt @@ -0,0 +1,52 @@ +* Hisilicon Hi6220 Clock Controller + +Clock control registers reside in different Hi6220 system controllers, +please refer the following document to know more about the binding rules +for these system controllers: + +Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi6220-acpu-sctrl" + - "hisilicon,hi6220-aoctrl" + - "hisilicon,hi6220-sysctrl" + - "hisilicon,hi6220-mediactrl" + - "hisilicon,hi6220-pmctrl" + - "hisilicon,hi6220-stub-clk" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Optional Properties: + +- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram; + the driver need use the sram to pass parameters for frequency change. + +- mboxes: use the label reference for the mailbox as the first parameter, the + second parameter is the channel number. + +Example 1: + sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + }; + +Example 2: + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mboxes = <&mailbox 1>; + }; + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/hisi-crg.txt b/Documentation/devicetree/bindings/clock/hisi-crg.txt new file mode 100644 index 000000000..cc60b3d42 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hisi-crg.txt @@ -0,0 +1,50 @@ +* HiSilicon Clock and Reset Generator(CRG) + +The CRG module provides clock and reset signals to various +modules within the SoC. + +This binding uses the following bindings: + Documentation/devicetree/bindings/clock/clock-bindings.txt + Documentation/devicetree/bindings/reset/reset.txt + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hi3516cv300-crg" + - "hisilicon,hi3516cv300-sysctrl" + - "hisilicon,hi3519-crg" + - "hisilicon,hi3798cv200-crg" + - "hisilicon,hi3798cv200-sysctrl" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>. + +- #reset-cells: should be 2. + +A reset signal can be controlled by writing a bit register in the CRG module. +The reset specifier consists of two cells. The first cell represents the +register offset relative to the base address. The second cell represents the +bit index in the register. + +Example: CRG nodes +CRG: clock-reset-controller@12010000 { + compatible = "hisilicon,hi3519-crg"; + reg = <0x12010000 0x10000>; + #clock-cells = <1>; + #reset-cells = <2>; +}; + +Example: consumer nodes +i2c0: i2c@12110000 { + compatible = "hisilicon,hi3519-i2c"; + reg = <0x12110000 0x1000>; + clocks = <&CRG HI3519_I2C0_RST>; + resets = <&CRG 0xe4 0>; +}; diff --git a/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml new file mode 100644 index 000000000..3ceb29cec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/hisilicon,hi3559av100-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon SOC Clock for HI3559AV100 + +maintainers: + - Dongjiu Geng <gengdongjiu@huawei.com> + +description: | + Hisilicon SOC clock control module which supports the clocks, resets and + power domains on HI3559AV100. + + See also: + dt-bindings/clock/hi3559av100-clock.h + +properties: + compatible: + enum: + - hisilicon,hi3559av100-clock + - hisilicon,hi3559av100-shub-clock + + reg: + minItems: 1 + maxItems: 2 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 2 + description: | + First cell is reset request register offset. + Second cell is bit offset in reset request register. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@12010000 { + compatible = "hisilicon,hi3559av100-clock"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x0 0x12010000 0x0 0x10000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt new file mode 100644 index 000000000..4733e58e4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt @@ -0,0 +1,30 @@ +* Hisilicon Hix5hd2 Clock Controller + +The hix5hd2 clock controller generates and supplies clock to various +controllers within the hix5hd2 SoC. + +Required Properties: + +- compatible: should be "hisilicon,hix5hd2-clock" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>. + +Examples: + clock: clock@f8a22000 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0xf8a22000 0x1000>; + #clock-cells = <1>; + }; + + uart0: uart@f8b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml new file mode 100644 index 000000000..f9ba9864d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators + +description: | + The IDT VersaClock 5 and VersaClock 6 are programmable I2C + clock generators providing from 3 to 12 output clocks. + + When referencing the provided clock in the DT using phandle and clock + specifier, the following mapping applies: + + - 5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + + - 5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + + - other parts: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + 3 -- OUT3 + 4 -- OUT4 + + The idt,shutdown and idt,output-enable-active properties control the + SH (en_global_shutdown) and SP bits of the Primary Source and Shutdown + Register, respectively. Their behavior is summarized by the following + table: + + SH SP Output when the SD/OE pin is Low/High + == == ===================================== + 0 0 Active/Inactive + 0 1 Inactive/Active + 1 0 Active/Shutdown + 1 1 Inactive/Shutdown + + The case where SH and SP are both 1 is likely not very interesting. + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +properties: + compatible: + enum: + - idt,5p49v5923 + - idt,5p49v5925 + - idt,5p49v5933 + - idt,5p49v5935 + - idt,5p49v6901 + - idt,5p49v6965 + - idt,5p49v6975 + + reg: + description: I2C device address + enum: [ 0x68, 0x6a ] + + '#clock-cells': + const: 1 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + + idt,xtal-load-femtofarads: + minimum: 9000 + maximum: 22760 + description: Optional load capacitor for XTAL1 and XTAL2 + + idt,shutdown: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + If 1, this enables the shutdown functionality: the chip will be + shut down if the SD/OE pin is driven high. If 0, this disables the + shutdown functionality: the chip will never be shut down based on + the value of the SD/OE pin. This property corresponds to the SH + bit of the Primary Source and Shutdown Register. + + idt,output-enable-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + If 1, this enables output when the SD/OE pin is high, and disables + output when the SD/OE pin is low. If 0, this disables output when + the SD/OE pin is high, and enables output when the SD/OE pin is + low. This corresponds to the SP bit of the Primary Source and + Shutdown Register. + +patternProperties: + "^OUT[1-4]$": + type: object + description: + Description of one of the outputs (OUT1..OUT4). See "Clock1 Output + Configuration" in the Versaclock 5/6/6E Family Register Description + and Programming Guide. + properties: + idt,mode: + description: + The output drive mode. Values defined in dt-bindings/clock/versaclock.h + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + idt,voltage-microvolt: + description: The output drive voltage. + enum: [ 1800000, 2500000, 3300000 ] + idt,slew-percent: + description: The Slew rate control for CMOS single-ended. + enum: [ 80, 85, 90, 100 ] + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - idt,shutdown + - idt,output-enable-active + +allOf: + - if: + properties: + compatible: + enum: + - idt,5p49v5933 + - idt,5p49v5935 + - idt,5p49v6975 + then: + # Devices with builtin crystal + optional external input + properties: + clock-names: + const: clkin + clocks: + maxItems: 1 + else: + # Devices without builtin crystal + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/versaclock.h> + + /* 25MHz reference crystal */ + ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + /* IDT 5P49V5923 I2C clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + + /* Set the SD/OE pin's settings */ + idt,shutdown = <0>; + idt,output-enable-active = <0>; + + OUT1 { + idt,mode = <VC5_CMOSD>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <80>; + }; + + OUT4 { + idt,mode = <VC5_LVDS>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt new file mode 100644 index 000000000..7bc5e9ffb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt @@ -0,0 +1,31 @@ +Binding for Imagination Technologies MIPS Boston clock sources. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +The device node must be a child node of the syscon node corresponding to the +Boston system's platform registers. + +Required properties: +- compatible : Should be "img,boston-clock". +- #clock-cells : Should be set to 1. + Values available for clock consumers can be found in the header file: + <dt-bindings/clock/boston-clock.h> + +Example: + + system-controller@17ffd000 { + compatible = "img,boston-platform-regs", "syscon"; + reg = <0x17ffd000 0x1000>; + + clk_boston: clock { + compatible = "img,boston-clock"; + #clock-cells = <1>; + }; + }; + + uart0: uart@17ffe000 { + /* ... */ + clocks = <&clk_boston BOSTON_CLK_SYS>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml new file mode 100644 index 000000000..56f524780 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx1-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX1 CPUs + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h + for the full list of i.MX1 clock IDs. + +properties: + compatible: + const: fsl,imx1-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx1-clock.h> + + clock-controller@21b000 { + #clock-cells = <1>; + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml new file mode 100644 index 000000000..e2d505447 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx21-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX21 + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h + for the full list of i.MX21 clock IDs. + +properties: + compatible: + const: fsl,imx21-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx21-clock.h> + + clock-controller@10027000 { + compatible = "fsl,imx21-ccm"; + reg = <0x10027000 0x800>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml new file mode 100644 index 000000000..7e890ab9c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx23-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX23 + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX23 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_phy 41 + +properties: + compatible: + const: fsl,imx23-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml new file mode 100644 index 000000000..1792e1389 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx25-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX25 + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX25 + clocks and IDs. + + Clock ID + -------------------------- + dummy 0 + osc 1 + mpll 2 + upll 3 + mpll_cpu_3_4 4 + cpu_sel 5 + cpu 6 + ahb 7 + usb_div 8 + ipg 9 + per0_sel 10 + per1_sel 11 + per2_sel 12 + per3_sel 13 + per4_sel 14 + per5_sel 15 + per6_sel 16 + per7_sel 17 + per8_sel 18 + per9_sel 19 + per10_sel 20 + per11_sel 21 + per12_sel 22 + per13_sel 23 + per14_sel 24 + per15_sel 25 + per0 26 + per1 27 + per2 28 + per3 29 + per4 30 + per5 31 + per6 32 + per7 33 + per8 34 + per9 35 + per10 36 + per11 37 + per12 38 + per13 39 + per14 40 + per15 41 + csi_ipg_per 42 + epit_ipg_per 43 + esai_ipg_per 44 + esdhc1_ipg_per 45 + esdhc2_ipg_per 46 + gpt_ipg_per 47 + i2c_ipg_per 48 + lcdc_ipg_per 49 + nfc_ipg_per 50 + owire_ipg_per 51 + pwm_ipg_per 52 + sim1_ipg_per 53 + sim2_ipg_per 54 + ssi1_ipg_per 55 + ssi2_ipg_per 56 + uart_ipg_per 57 + ata_ahb 58 + reserved 59 + csi_ahb 60 + emi_ahb 61 + esai_ahb 62 + esdhc1_ahb 63 + esdhc2_ahb 64 + fec_ahb 65 + lcdc_ahb 66 + rtic_ahb 67 + sdma_ahb 68 + slcdc_ahb 69 + usbotg_ahb 70 + reserved 71 + reserved 72 + reserved 73 + reserved 74 + can1_ipg 75 + can2_ipg 76 + csi_ipg 77 + cspi1_ipg 78 + cspi2_ipg 79 + cspi3_ipg 80 + dryice_ipg 81 + ect_ipg 82 + epit1_ipg 83 + epit2_ipg 84 + reserved 85 + esdhc1_ipg 86 + esdhc2_ipg 87 + fec_ipg 88 + reserved 89 + reserved 90 + reserved 91 + gpt1_ipg 92 + gpt2_ipg 93 + gpt3_ipg 94 + gpt4_ipg 95 + reserved 96 + reserved 97 + reserved 98 + iim_ipg 99 + reserved 100 + reserved 101 + kpp_ipg 102 + lcdc_ipg 103 + reserved 104 + pwm1_ipg 105 + pwm2_ipg 106 + pwm3_ipg 107 + pwm4_ipg 108 + rngb_ipg 109 + reserved 110 + scc_ipg 111 + sdma_ipg 112 + sim1_ipg 113 + sim2_ipg 114 + slcdc_ipg 115 + spba_ipg 116 + ssi1_ipg 117 + ssi2_ipg 118 + tsc_ipg 119 + uart1_ipg 120 + uart2_ipg 121 + uart3_ipg 122 + uart4_ipg 123 + uart5_ipg 124 + reserved 125 + wdt_ipg 126 + cko_div 127 + cko_sel 128 + cko 129 + +properties: + compatible: + const: fsl,imx25-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml new file mode 100644 index 000000000..99925aa22 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx27-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX27 + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h + for the full list of i.MX27 clock IDs. + +properties: + compatible: + const: fsl,imx27-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx27-clock.h> + + clock-controller@10027000 { + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + interrupts = <31>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml new file mode 100644 index 000000000..a542d680b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx28-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX28 + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX28 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_phy 62 + usb1_phy 63 + enet_out 64 + +properties: + compatible: + const: fsl,imx28-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml new file mode 100644 index 000000000..168c8ada5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx31-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX31 + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX31 + clocks and IDs. + + Clock ID + ----------------------- + dummy 0 + ckih 1 + ckil 2 + mpll 3 + spll 4 + upll 5 + mcu_main 6 + hsp 7 + ahb 8 + nfc 9 + ipg 10 + per_div 11 + per 12 + csi_sel 13 + fir_sel 14 + csi_div 15 + usb_div_pre 16 + usb_div_post 17 + fir_div_pre 18 + fir_div_post 19 + sdhc1_gate 20 + sdhc2_gate 21 + gpt_gate 22 + epit1_gate 23 + epit2_gate 24 + iim_gate 25 + ata_gate 26 + sdma_gate 27 + cspi3_gate 28 + rng_gate 29 + uart1_gate 30 + uart2_gate 31 + ssi1_gate 32 + i2c1_gate 33 + i2c2_gate 34 + i2c3_gate 35 + hantro_gate 36 + mstick1_gate 37 + mstick2_gate 38 + csi_gate 39 + rtc_gate 40 + wdog_gate 41 + pwm_gate 42 + sim_gate 43 + ect_gate 44 + usb_gate 45 + kpp_gate 46 + ipu_gate 47 + uart3_gate 48 + uart4_gate 49 + uart5_gate 50 + owire_gate 51 + ssi2_gate 52 + cspi1_gate 53 + cspi2_gate 54 + gacc_gate 55 + emi_gate 56 + rtic_gate 57 + firi_gate 58 + +properties: + compatible: + const: fsl,imx31-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for DVFS when a frequency change is requested, request 2 is + to generate interrupt for DPTC when a voltage change is requested. + items: + - description: CCM DVFS interrupt request 1 + - description: CCM DPTC interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml new file mode 100644 index 000000000..6415bb6a8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx35-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX35 + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX35 + clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + ckli_gate 82 + +properties: + compatible: + const: fsl,imx35-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml new file mode 100644 index 000000000..c0e19ff92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx5-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX5 + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h + for the full list of i.MX5 clock IDs. + +properties: + compatible: + enum: + - fsl,imx53-ccm + - fsl,imx51-ccm + - fsl,imx50-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 72 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml new file mode 100644 index 000000000..4f4637edd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 Quad + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6q-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 24m osc + - description: 32k osc + - description: ckih1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: osc + - const: ckil + - const: ckih1 + - const: anaclk1 + - const: anaclk2 + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml new file mode 100644 index 000000000..b83c8f43d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloLite + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sl-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml new file mode 100644 index 000000000..484894a4b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SLL + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sll-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml new file mode 100644 index 000000000..e6c795657 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloX + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sx-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + - const: anaclk1 + - const: anaclk2 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml new file mode 100644 index 000000000..6a51a3f51 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 UltraLite + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6ul-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml new file mode 100644 index 000000000..cefb61db0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX7 Dual + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Anson Huang <Anson.Huang@nxp.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h + for the full list of i.MX7 Dual clock IDs. + +properties: + compatible: + const: fsl,imx7d-ccm + + reg: + maxItems: 1 + + interrupts: + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + + clock-names: + items: + - const: ckil + - const: osc + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml new file mode 100644 index 000000000..739c3378f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules + +maintainers: + - A.s. Dong <aisheng.dong@nxp.com> + +description: | + i.MX7ULP Clock functions are under joint control of the System + Clock Generation (SCG) modules, Peripheral Clock Control (PCC) + modules, and Core Mode Controller (CMC)1 blocks + + The clocking scheme provides clear separation between M4 domain + and A7 domain. Except for a few clock sources shared between two + domains, such as the System Oscillator clock, the Slow IRC (SIRC), + and and the Fast IRC clock (FIRCLK), clock sources and clock + management are separated and contained within each domain. + + M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. + A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. + + Note: this binding doc is only for A7 clock domain. + + The Peripheral Clock Control (PCC) is responsible for clock selection, + optional division and clock gating mode for peripherals in their + respected power domain. + + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/imx7ulp-clock.h for the full list of + i.MX7ULP clock IDs of each module. + +properties: + compatible: + enum: + - fsl,imx7ulp-pcc2 + - fsl,imx7ulp-pcc3 + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: nic1 bus clock + - description: nic1 clock + - description: ddr clock + - description: apll pfd2 + - description: apll pfd1 + - description: apll pfd0 + - description: usb pll + - description: system osc bus clock + - description: fast internal reference clock bus + - description: rtc osc + - description: system pll bus clock + + clock-names: + items: + - const: nic1_bus_clk + - const: nic1_clk + - const: ddr_clk + - const: apll_pfd2 + - const: apll_pfd1 + - const: apll_pfd0 + - const: upll + - const: sosc_bus_clk + - const: firc_bus_clk + - const: rosc + - const: spll_bus_clk + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7ulp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "firc_bus_clk", + "rosc", "spll_bus_clk"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml new file mode 100644 index 000000000..d06344d7e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules + +maintainers: + - A.s. Dong <aisheng.dong@nxp.com> + +description: | + i.MX7ULP Clock functions are under joint control of the System + Clock Generation (SCG) modules, Peripheral Clock Control (PCC) + modules, and Core Mode Controller (CMC)1 blocks + + The clocking scheme provides clear separation between M4 domain + and A7 domain. Except for a few clock sources shared between two + domains, such as the System Oscillator clock, the Slow IRC (SIRC), + and and the Fast IRC clock (FIRCLK), clock sources and clock + management are separated and contained within each domain. + + M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. + A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. + + Note: this binding doc is only for A7 clock domain. + + The System Clock Generation (SCG) is responsible for clock generation + and distribution across this device. Functions performed by the SCG + include: clock reference selection, generation of clock used to derive + processor, system, peripheral bus and external memory interface clocks, + source selection for peripheral clocks and control of power saving + clock gating mode. + + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/imx7ulp-clock.h for the full list of + i.MX7ULP clock IDs of each module. + +properties: + compatible: + const: fsl,imx7ulp-scg1 + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: rtc osc + - description: system osc + - description: slow internal reference clock + - description: fast internal reference clock + - description: usb PLL + + clock-names: + items: + - const: rosc + - const: sosc + - const: sirc + - const: firc + - const: upll + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7ulp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@403e0000 { + compatible = "fsl,imx7ulp-scg1"; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml new file mode 100644 index 000000000..458c7645e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Family Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock + controller, which generates and supplies to all modules. + +properties: + compatible: + enum: + - fsl,imx8mm-ccm + - fsl,imx8mn-ccm + - fsl,imx8mp-ccm + - fsl,imx8mq-ccm + + reg: + maxItems: 1 + + clocks: + minItems: 6 + maxItems: 7 + + clock-names: + minItems: 6 + maxItems: 7 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h + for the full list of i.MX8M clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mq-ccm + then: + properties: + clocks: + items: + - description: 32k osc + - description: 25m osc + - description: 27m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + clock-names: + items: + - const: ckil + - const: osc_25m + - const: osc_27m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + else: + properties: + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + - | + clock-controller@30390000 { + compatible = "fsl,imx8mq-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>, + <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; + clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1", + "clk_ext2", "clk_ext3", "clk_ext4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml new file mode 100644 index 000000000..cb80105b3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +maintainers: + - Aisheng Dong <aisheng.dong@nxp.com> + +description: | + The Low-Power Clock Gate (LPCG) modules contain a local programming + model to control the clock gates for the peripherals. An LPCG module + is used to locally gate the clocks for the associated peripheral. + + This level of clock gating is provided after the clocks are generated + by the SCU resources and clock controls. Thus even if the clock is + enabled by these control bits, it might still not be running based + on the base resource. + + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from: + include/dt-bindings/clock/imx8-lpcg.h + +properties: + compatible: + oneOf: + - const: fsl,imx8qxp-lpcg + - items: + - enum: + - fsl,imx8qm-lpcg + - const: fsl,imx8qxp-lpcg + - enum: + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu + deprecated: true + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + description: | + Input parent clocks phandle array for each clock + minItems: 1 + maxItems: 8 + + clock-indices: + description: | + An integer array indicating the bit offset for each clock. + Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the + supported LPCG clock indices. + minItems: 1 + maxItems: 8 + + clock-output-names: + description: | + Shall be the corresponding names of the outputs. + NOTE this property must be specified in the same order + as the clock-indices property. + minItems: 1 + maxItems: 8 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; + #clock-cells = <1>; + clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, + <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml new file mode 100644 index 000000000..71f7186b1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8ULP Clock Generation & Control(CGC) Module Binding + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: | + On i.MX8ULP, The clock sources generation, distribution and management is + under the control of several CGCs & PCCs modules. The CGC modules generate + and distribute clocks on the device. + +properties: + compatible: + enum: + - fsl,imx8ulp-cgc1 + - fsl,imx8ulp-cgc2 + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Generation & Control Module node: + - | + clock-controller@292c0000 { + compatible = "fsl,imx8ulp-cgc1"; + reg = <0x292c0000 0x10000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml new file mode 100644 index 000000000..00612725b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module Binding + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: | + On i.MX8ULP, The clock sources generation, distribution and management is + under the control of several CGCs & PCCs modules. The PCC modules control + software reset, clock selection, optional division and clock gating mode + for peripherals. + +properties: + compatible: + enum: + - fsl,imx8ulp-pcc3 + - fsl,imx8ulp-pcc4 + - fsl,imx8ulp-pcc5 + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + # Peripheral Clock Control Module node: + - | + clock-controller@292d0000 { + compatible = "fsl,imx8ulp-pcc3"; + reg = <0x292d0000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml new file mode 100644 index 000000000..21a06194e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx93-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX93 Clock Control Module Binding + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + i.MX93 clock control module is an integrated clock controller, which + includes clock generator, clock gate and supplies to all modules. + +properties: + compatible: + enum: + - fsl,imx93-ccm + + reg: + maxItems: 1 + + clocks: + description: + specify the external clocks used by the CCM module. + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + + clock-names: + description: + specify the external clocks names used by the CCM module. + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + + '#clock-cells': + const: 1 + description: + See include/dt-bindings/clock/imx93-clock.h for the full list of + i.MX93 clock IDs. + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + clock-controller@44450000 { + compatible = "fsl,imx93-ccm"; + reg = <0x44450000 0x10000>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml new file mode 100644 index 000000000..03fc5c1a2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MXRT + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h + for the full list of i.MXRT clock IDs. + +properties: + compatible: + const: fsl,imxrt1050-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + clocks: + description: 24m osc + maxItems: 1 + + clock-names: + const: osc + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imxrt1050-clock.h> + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml new file mode 100644 index 000000000..aa1df03ef --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs CGU devicetree bindings + +description: | + The CGU in an Ingenic SoC provides all the clocks generated on-chip. It + typically includes a variety of PLLs, multiplexers, dividers & gates in order + to provide many different clock signals derived from only 2 external source + clocks. + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +select: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4760-cgu + - ingenic,jz4760b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + required: + - compatible + +properties: + $nodename: + pattern: "^clock-controller@[0-9a-f]+$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#clock-cells": + const: 1 + + ranges: true + + compatible: + items: + - enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4760-cgu + - ingenic,jz4760b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + - const: simple-mfd + minItems: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: External oscillator clock + - description: Internal 32 kHz RTC clock + + clock-names: + items: + - const: ext + - enum: + - rtc + - osc32k # Different name, same clock + + assigned-clocks: + minItems: 1 + maxItems: 64 + + assigned-clock-parents: + minItems: 1 + maxItems: 64 + + assigned-clock-rates: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + +patternProperties: + "^usb-phy@[a-f0-9]+$": + allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ] + "^mac-phy-ctrl@[a-f0-9]+$": + allOf: [ $ref: "../net/ingenic,mac.yaml#" ] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4770-cgu.h> + cgu: clock-controller@10000000 { + compatible = "ingenic,jz4770-cgu", "simple-mfd"; + reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + clocks = <&ext>, <&osc32k>; + clock-names = "ext", "osc32k"; + + #clock-cells = <1>; + + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + vcc-supply = <&ldo5>; + + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/intel,agilex.yaml b/Documentation/devicetree/bindings/clock/intel,agilex.yaml new file mode 100644 index 000000000..cf5a9eb80 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intel,agilex.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,agilex.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA Agilex platform clock controller binding + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: + The Intel Agilex Clock controller is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: intel,agilex-clkmgr + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock controller node: + - | + clkmgr: clock-controller@ffd10000 { + compatible = "intel,agilex-clkmgr"; + reg = <0xffd10000 0x1000>; + clocks = <&osc1>; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml new file mode 100644 index 000000000..f3e1a700a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding + +maintainers: + - Rahul Tanwar <rahul.tanwar@linux.intel.com> + +description: | + Lightning Mountain(LGM) SoC's Clock Generation Unit(CGU) driver provides + all means to access the CGU hardware module in order to generate a series + of clocks for the whole system and individual peripherals. + + Please refer to include/dt-bindings/clock/intel,lgm-clk.h header file, it + defines all available clocks as macros. These macros can be used in device + tree sources. + +properties: + compatible: + const: intel,cgu-lgm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + cgu: clock-controller@e0200000 { + compatible = "intel,cgu-lgm"; + reg = <0xe0200000 0x33c>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml new file mode 100644 index 000000000..8f45976e9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA eASIC N5X platform clock controller binding + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: + The Intel eASIC N5X Clock controller is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: intel,easic-n5x-clkmgr + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock controller node: + - | + clkmgr: clock-controller@ffd10000 { + compatible = "intel,easic-n5x-clkmgr"; + reg = <0xffd10000 0x1000>; + clocks = <&osc1>; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml new file mode 100644 index 000000000..f506e3db9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA Stratix10 platform clock controller binding + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + const: intel,stratix10-clkmgr + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@ffd10000 { + compatible = "intel,stratix10-clkmgr"; + reg = <0xffd10000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt new file mode 100644 index 000000000..c5aa18702 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt @@ -0,0 +1,29 @@ +Status: Unstable - ABI compatibility may be broken in the future + +Binding for Keystone gate control driver which uses PSC controller IP. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,keystone,psc-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : parent clock phandle +- reg : psc control and domain address address space +- reg-names : psc control and domain registers +- domain-id : psc domain id needed to check the transition state register + +Optional properties: +- clock-output-names : From common clock binding to override the + default output clock name +Example: + clkusb: clkusb { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "usb"; + reg = <0x02350008 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt new file mode 100644 index 000000000..47570d207 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -0,0 +1,84 @@ +Status: Unstable - ABI compatibility may be broken in the future + +Binding for keystone PLLs. The main PLL IP typically has a multiplier, +a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL +and PAPLL are controlled by the memory mapped register where as the Main +PLL is controlled by a PLL controller registers along with memory mapped +registers. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- #clock-cells : from common clock binding; shall be set to 0. +- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock" +- clocks : parent clock phandle +- reg - pll control0 and pll multipler registers +- reg-names : control, multiplier and post-divider. The multiplier and + post-divider registers are applicable only for main pll clock +- fixed-postdiv : fixed post divider value. If absent, use clkod register bits + for postdiv + +Example: + mainpllclk: mainpllclk@2310110 { + #clock-cells = <0>; + compatible = "ti,keystone,main-pll-clock"; + clocks = <&refclksys>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; + fixed-postdiv = <2>; + }; + + papllclk: papllclk@2620358 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkpass>; + clock-output-names = "pa-pll-clk"; + reg = <0x02620358 4>; + reg-names = "control"; + }; + +Required properties: +- #clock-cells : from common clock binding; shall be set to 0. +- compatible : shall be "ti,keystone,pll-mux-clock" +- clocks : link phandles of parent clocks +- reg - pll mux register +- bit-shift : number of bits to shift the bit-mask +- bit-mask : arbitrary bitmask for programming the mux + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + mainmuxclk: mainmuxclk@2310108 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-mux-clock"; + clocks = <&mainpllclk>, <&refclkmain>; + reg = <0x02310108 4>; + bit-shift = <23>; + bit-mask = <1>; + clock-output-names = "mainmuxclk"; + }; + +Required properties: +- #clock-cells : from common clock binding; shall be set to 0. +- compatible : shall be "ti,keystone,pll-divider-clock" +- clocks : parent clock phandle +- reg - pll mux register +- bit-shift : number of bits to shift the bit-mask +- bit-mask : arbitrary bitmask for programming the divider + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + gemtraceclk: gemtraceclk@2310120 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-divider-clock"; + clocks = <&mainmuxclk>; + reg = <0x02310120 4>; + bit-shift = <0>; + bit-mask = <8>; + clock-output-names = "gemtraceclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt new file mode 100644 index 000000000..fa97c1201 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt @@ -0,0 +1,77 @@ +* NXP LPC1850 Clock Control Unit (CCU) + +Each CGU base clock has several clock branches which can be turned on +or off independently by the Clock Control Units CCU1 or CCU2. The +branch clocks are distributed between CCU1 and CCU2. + + - Above text taken from NXP LPC1850 User Manual. + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-ccu" +- reg: + Shall define the base and range of the address space + containing clock control registers +- #clock-cells: + Shall have value <1>. The permitted clock-specifier values + are the branch clock names defined in table below. +- clocks: + Shall contain a list of phandles for the base clocks routed + from the CGU to the specific CCU. See mapping of base clocks + and CCU in table below. +- clock-names: + Shall contain a list of names for the base clock routed + from the CGU to the specific CCU. Valid CCU clock names: + "base_usb0_clk", "base_periph_clk", "base_usb1_clk", + "base_cpu_clk", "base_spifi_clk", "base_spi_clk", + "base_apb1_clk", "base_apb3_clk", "base_adchs_clk", + "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk", + "base_uart0_clk", "base_uart1_clk", "base_uart2_clk", + "base_uart3_clk", "base_audio_clk" + +Which branch clocks that are available on the CCU depends on the +specific LPC part. Check the user manual for your specific part. + +A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h. + +Example board file: + +soc { + ccu1: clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + ccu2: clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + + /* A user of CCU brach clocks */ + uart1: serial@40082000 { + ... + clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt new file mode 100644 index 000000000..2cc32a9a9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt @@ -0,0 +1,131 @@ +* NXP LPC1850 Clock Generation Unit (CGU) + +The CGU generates multiple independent clocks for the core and the +peripheral blocks of the LPC18xx. Each independent clock is called +a base clock and itself is one of the inputs to the two Clock +Control Units (CCUs) which control the branch clocks to the +individual peripherals. + +The CGU selects the inputs to the clock generators from multiple +clock sources, controls the clock generation, and routes the outputs +of the clock generators through the clock source bus to the output +stages. Each output stage provides an independent clock source and +corresponds to one of the base clocks for the LPC18xx. + + - Above text taken from NXP LPC1850 User Manual. + + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-cgu" +- reg: + Shall define the base and range of the address space + containing clock control registers +- #clock-cells: + Shall have value <1>. The permitted clock-specifier values + are the base clock numbers defined below. +- clocks: + Shall contain a list of phandles for the external input + sources to the CGU. The list shall be in the following + order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin. +- clock-indices: + Shall be an ordered list of numbers defining the base clock + number provided by the CGU. +- clock-output-names: + Shall be an ordered list of strings defining the names of + the clocks provided by the CGU. + +Which base clocks that are available on the CGU depends on the +specific LPC part. Base clocks are numbered from 0 to 27. + +Number: Name: Description: + 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT + 1 BASE_USB0_CLK Base clock for USB0 + 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem, + SPI, and SGPIO + 3 BASE_USB1_CLK Base clock for USB1 + 4 BASE_CPU_CLK System base clock for ARM Cortex-M core + and APB peripheral blocks #0 and #2 + 5 BASE_SPIFI_CLK Base clock for SPIFI + 6 BASE_SPI_CLK Base clock for SPI + 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock + 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock + 9 BASE_APB1_CLK Base clock for APB peripheral block # 1 +10 BASE_APB3_CLK Base clock for APB peripheral block # 3 +11 BASE_LCD_CLK Base clock for LCD +12 BASE_ADCHS_CLK Base clock for ADCHS +13 BASE_SDIO_CLK Base clock for SD/MMC +14 BASE_SSP0_CLK Base clock for SSP0 +15 BASE_SSP1_CLK Base clock for SSP1 +16 BASE_UART0_CLK Base clock for UART0 +17 BASE_UART1_CLK Base clock for UART1 +18 BASE_UART2_CLK Base clock for UART2 +19 BASE_UART3_CLK Base clock for UART3 +20 BASE_OUT_CLK Base clock for CLKOUT pin +24-21 - Reserved +25 BASE_AUDIO_CLK Base clock for audio system (I2S) +26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output +27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output + +BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx. +BASE_ADCHS_CLK is only available on LPC4370. + + +Example board file: + +/ { + clocks { + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + xtal32: xtal32 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + enet_rx_clk: enet_rx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_rx_clk"; + }; + + enet_tx_clk: enet_tx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_tx_clk"; + }; + + gp_clkin: gp_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "gp_clkin"; + }; + }; + + soc { + cgu: clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + + /* A CGU and CCU clock consumer */ + lcdc: lcdc@40008000 { + ... + clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; + clock-names = "clcdclk", "apb_pclk"; + ... + }; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt new file mode 100644 index 000000000..6f1c7b4e4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt @@ -0,0 +1,52 @@ +* NXP LPC1850 CREG clocks + +The NXP LPC18xx/43xx CREG (Configuration Registers) block contains +control registers for two low speed clocks. One of the clocks is a +32 kHz oscillator driver with power up/down and clock gating. Next +is a fixed divider that creates a 1 kHz clock from the 32 kHz osc. + +These clocks are used by the RTC and the Event Router peripherials. +The 32 kHz can also be routed to other peripherials to enable low +power modes. + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-creg-clk" +- #clock-cells: + Shall have value <1>. +- clocks: + Shall contain a phandle to the fixed 32 kHz crystal. + +The creg-clk node must be a child of the creg syscon node. + +The following clocks are available from the clock node. + +Clock ID Name + 0 1 kHz clock + 1 32 kHz Oscillator + +Example: +soc { + creg: syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + + creg_clk: clock-controller { + compatible = "nxp,lpc1850-creg-clk"; + clocks = <&xtal32>; + #clock-cells = <1>; + }; + + ... + }; + + rtc: rtc@40046000 { + ... + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt new file mode 100644 index 000000000..3ce97cfe9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt @@ -0,0 +1,29 @@ +AXM5516 clock driver bindings +----------------------------- + +Required properties : +- compatible : shall contain "lsi,axm5516-clks" +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 + +The consumer specifies the desired clock by having the clock ID in its "clocks" +phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of +supported clock IDs. + +Example: + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + }; + }; + diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml new file mode 100644 index 000000000..175f5c8f2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +title: Marvell Armada 3720 UART clocks + +maintainers: + - Pali Rohár <pali@kernel.org> + +properties: + compatible: + const: marvell,armada-3700-uart-clock + + reg: + items: + - description: UART Clock Control Register + - description: UART 2 Baud Rate Divisor Register + + clocks: + description: | + List of parent clocks suitable for UART from following set: + "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal" + UART clock can use one from this set and when more are provided + then kernel would choose and configure the most suitable one. + It is suggest to specify at least one TBG clock to achieve + baudrates above 230400 and also to specify clock which bootloader + used for UART (most probably xtal) for smooth boot log on UART. + + clock-names: + items: + - const: TBG-A-P + - const: TBG-B-P + - const: TBG-A-S + - const: TBG-B-S + - const: xtal + minItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/Documentation/devicetree/bindings/clock/marvell,berlin.txt new file mode 100644 index 000000000..c611c495f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,berlin.txt @@ -0,0 +1,31 @@ +Device Tree Clock bindings for Marvell Berlin + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Clock related registers are spread among the chip control registers. Berlin +clock node should be a sub-node of the chip controller node. Marvell Berlin2 +(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some +minor differences in features and register layout. + +Required properties: +- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk" +- #clock-cells: must be 1 +- clocks: must be the input parent clock phandle +- clock-names: name of the input parent clock + Allowed clock-names for the reference clocks are + "refclk" for the SoCs oscillator input on all SoCs, + and SoC-specific input clocks for + BG2/BG2CD: "video_ext0" for the external video clock input + + +Example: + +chip_clk: clock { + compatible = "marvell,berlin2q-clk"; + + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; +}; diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml new file mode 100644 index 000000000..dffa73402 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-audio-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 Audio Clock Controller + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The audio clock controller generates and supplies the clocks to the audio + codec. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in + <dt-bindings/clock/marvell,mmp2-audio.h>. + +properties: + compatible: + enum: + - marvell,mmp2-audio-clock + + reg: + maxItems: 1 + + clocks: + items: + - description: Audio subsystem clock + - description: The crystal oscillator clock + - description: First I2S clock + - description: Second I2S clock + + clock-names: + items: + - const: audio + - const: vctcxo + - const: i2s0 + - const: i2s1 + + '#clock-cells': + const: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2-audio.h> + #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/power/marvell,mmp2.h> + + clock-controller@d42a0c30 { + compatible = "marvell,mmp2-audio-clock"; + reg = <0xd42a0c30 0x10>; + clock-names = "audio", "vctcxo", "i2s0", "i2s1"; + clocks = <&soc_clocks MMP2_CLK_AUDIO>, + <&soc_clocks MMP2_CLK_VCTCXO>, + <&soc_clocks MMP2_CLK_I2S0>, + <&soc_clocks MMP2_CLK_I2S1>; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml new file mode 100644 index 000000000..d68f0d196 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 and MMP3 Clock Controller + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The clock subsystem on MMP2 or MMP3 generates and supplies clock to various + controllers within the SoC. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. + +properties: + compatible: + enum: + - marvell,mmp2-clock # controller compatible with MMP2 SoC + - marvell,mmp3-clock # controller compatible with MMP3 SoC + + reg: + items: + - description: MPMU register region + - description: APMU register region + - description: APBC register region + + reg-names: + items: + - const: mpmu + - const: apmu + - const: apbc + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + clock-controller@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa168.txt b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt new file mode 100644 index 000000000..c62eb1d17 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt @@ -0,0 +1,21 @@ +* Marvell PXA168 Clock Controller + +The PXA168 clock subsystem generates and supplies clock to various +controllers within the PXA168 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa168-clock" - controller compatible with PXA168 SoC. + +- reg: physical base address of the clock subsystem and length of memory mapped + region. There are 3 places in SOC has clock control logic: + "mpmu", "apmu", "apbc". So three reg spaces need to be defined. + +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>. diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt new file mode 100644 index 000000000..809c5a2d8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt @@ -0,0 +1,21 @@ +* Marvell PXA1928 Clock Controllers + +The PXA1928 clock subsystem generates and supplies clock to various +controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller +blocks called APMU, MPMU, and APBC roughly corresponding to internal buses. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa1928-apmu" - APMU controller compatible + - "marvell,pxa1928-mpmu" - MPMU controller compatible + - "marvell,pxa1928-apbc" - APBC controller compatible +- reg: physical base address of the clock controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use the clock controller +phandle and this identifier to specify the clock which they consume. + +All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>. diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt new file mode 100644 index 000000000..d9f41f3c0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt @@ -0,0 +1,21 @@ +* Marvell PXA910 Clock Controller + +The PXA910 clock subsystem generates and supplies clock to various +controllers within the PXA910 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa910-clock" - controller compatible with PXA910 SoC. + +- reg: physical base address of the clock subsystem and length of memory mapped + region. There are 4 places in SOC has clock control logic: + "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined. + +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>. diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt new file mode 100644 index 000000000..c10849efb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -0,0 +1,114 @@ +Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block + +This is a part of device tree bindings of MAX77686/MAX77802/MAX77620 +multi-function device. More information can be found in MFD DT binding +doc as follows: + bindings/mfd/max77686.txt for MAX77686 and + bindings/mfd/max77802.txt for MAX77802 and + bindings/mfd/max77620.txt for MAX77620. + +The MAX77686 contains three 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. Clocks are defined as preprocessor macros in +dt-bindings/clock/maxim,max77686.h. + + +The MAX77802 contains two 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. Clocks are defined as preprocessor macros in +dt-bindings/clock/maxim,max77802.h. + +The MAX77686 contains one 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. Clocks are defined as preprocessor macros in +dt-bindings/clock/maxim,max77620.h. + +Following properties should be presend in main device node of the MFD chip. + +Required properties: + +- #clock-cells: from common clock binding; shall be set to 1. + +Optional properties: +- clock-output-names: From common clock binding. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: + - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620) + - 1: 32khz_cp clock (max77686, max77802), + - 2: 32khz_pmic clock (max77686). + +Clocks are defined as preprocessor macros in above dt-binding header for +respective chips. + +Example: + +1. With MAX77686: + +#include <dt-bindings/clock/maxim,max77686.h> +/* ... */ + + Node of the MFD chip + max77686: max77686@9 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + + Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77686 MAX77686_CLK_PMIC>; + }; + +2. With MAX77802: + +#include <dt-bindings/clock/maxim,max77802.h> +/* ... */ + + Node of the MFD chip + max77802: max77802@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + + Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77802 MAX77802_CLK_32K_AP>; + }; + + +3. With MAX77620: + +#include <dt-bindings/clock/maxim,max77620.h> +/* ... */ + + Node of the MFD chip + max77620: max77620@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + #clock-cells = <1>; + /* ... */ + }; + + Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77620 MAX77620_CLK_32K_OUT0>; + }; diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt new file mode 100644 index 000000000..61bec1100 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max9485.txt @@ -0,0 +1,59 @@ +Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator + +This device exposes 4 clocks in total: + +- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz +- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete + frequencies +- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT + +MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set +requests. + +Required properties: +- compatible: "maxim,max9485" +- clocks: Input clock, must provice 27.000 MHz +- clock-names: Must be set to "xclk" +- #clock-cells: From common clock binding; shall be set to 1 + +Optional properties: +- reset-gpios: GPIO descriptor connected to the #RESET input pin +- vdd-supply: A regulator node for Vdd +- clock-output-names: Name of output clocks, as defined in common clock + bindings + +If not explicitly set, the output names are "mclkout", "clkout", "clkout1" +and "clkout2". + +Clocks are defined as preprocessor macros in the dt-binding header. + +Example: + + #include <dt-bindings/clock/maxim,max9485.h> + + xo-27mhz: xo-27mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + &i2c0 { + max9485: audio-clock@63 { + reg = <0x63>; + compatible = "maxim,max9485"; + clock-names = "xclk"; + clocks = <&xo-27mhz>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + vdd-supply = <&3v3-reg>; + #clock-cells = <1>; + }; + }; + + // Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "foo-input-clk"; + clocks = <&max9485 MAX9485_CLKOUT1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml new file mode 100644 index 000000000..731bfe040 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek AP Mixedsys Controller + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +description: + The Mediatek apmixedsys controller provides PLLs to the system. + The clock values can be found in <dt-bindings/clock/mt*-clk.h>. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-apmixedsys + - mediatek,mt7622-apmixedsys + - mediatek,mt7986-apmixedsys + - mediatek,mt8135-apmixedsys + - mediatek,mt8173-apmixedsys + - mediatek,mt8516-apmixedsys + - items: + - const: mediatek,mt7623-apmixedsys + - const: mediatek,mt2701-apmixedsys + - const: syscon + - items: + - enum: + - mediatek,mt2701-apmixedsys + - mediatek,mt2712-apmixedsys + - mediatek,mt6765-apmixedsys + - mediatek,mt6779-apmixedsys + - mediatek,mt6795-apmixedsys + - mediatek,mt7629-apmixedsys + - mediatek,mt8167-apmixedsys + - mediatek,mt8183-apmixedsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt8173-apmixedsys"; + reg = <0x10209000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml new file mode 100644 index 000000000..04469eabc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Functional Clock Controller for MT6795 + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Chun-Jie Chen <chun-jie.chen@mediatek.com> + +description: | + The clock architecture in MediaTek like below + PLLs --> + dividers --> + muxes + --> + clock gate + + The devices provide clock gate control in different IP blocks. + +properties: + compatible: + enum: + - mediatek,mt6795-mfgcfg + - mediatek,mt6795-vdecsys + - mediatek,mt6795-vencsys + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mfgcfg: clock-controller@13000000 { + compatible = "mediatek,mt6795-mfgcfg"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt6795-vdecsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@18000000 { + compatible = "mediatek,mt6795-vencsys"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml new file mode 100644 index 000000000..378b76123 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Clock Controller for MT6795 + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Chun-Jie Chen <chun-jie.chen@mediatek.com> + +description: + The Mediatek system clock controller provides various clocks and system + configuration like reset and bus protection on MT6795. + +properties: + compatible: + items: + - enum: + - mediatek,mt6795-apmixedsys + - mediatek,mt6795-infracfg + - mediatek,mt6795-pericfg + - mediatek,mt6795-topckgen + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt6795-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml new file mode 100644 index 000000000..b42f0f5c1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT7621 Clock + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + The MT7621 has a PLL controller from where the cpu clock is provided + as well as derived clocks for the bus and the peripherals. It also + can gate SoC device clocks. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in: + [1]: <include/dt-bindings/clock/mt7621-clk.h>. + + The clocks are provided inside a system controller node. + + This node is also a reset provider for all the peripherals. + + Reset related bits are defined in: + [2]: <include/dt-bindings/reset/mt7621-reset.h>. + +properties: + compatible: + items: + - const: mediatek,mt7621-sysc + - const: syscon + + reg: + maxItems: 1 + + "#clock-cells": + description: + The first cell indicates the clock number, see [1] for available + clocks. + const: 1 + + "#reset-cells": + description: + The first cell indicates the reset bit within the register, see + [2] for available resets. + const: 1 + + ralink,memctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of syscon used to control memory registers + + clock-output-names: + maxItems: 8 + +required: + - compatible + - reg + - '#clock-cells' + - ralink,memctl + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7621-clk.h> + + sysc: sysc@0 { + compatible = "mediatek,mt7621-sysc", "syscon"; + reg = <0x0 0x100>; + #clock-cells = <1>; + #reset-cells = <1>; + ralink,memctl = <&memc>; + clock-output-names = "xtal", "cpu", "bus", + "50m", "125m", "150m", + "250m", "270m"; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml new file mode 100644 index 000000000..b327ecb4e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Functional Clock Controller for MT8365 + +maintainers: + - Markus Schneider-Pargmann <msp@baylibre.com> + +properties: + compatible: + items: + - enum: + - mediatek,mt8365-apu + - mediatek,mt8365-imgsys + - mediatek,mt8365-mfgcfg + - mediatek,mt8365-vdecsys + - mediatek,mt8365-vencsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + apu: clock-controller@19020000 { + compatible = "mediatek,mt8365-apu", "syscon"; + reg = <0x19020000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml new file mode 100644 index 000000000..643f84660 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Clock Controller for MT8365 + +maintainers: + - Markus Schneider-Pargmann <msp@baylibre.com> + +description: + The apmixedsys module provides most of PLLs which generated from SoC 26m. + The topckgen provides dividers and muxes which provides the clock source to other IP blocks. + The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks. + +properties: + compatible: + items: + - enum: + - mediatek,mt8365-topckgen + - mediatek,mt8365-infracfg + - mediatek,mt8365-apmixedsys + - mediatek,mt8365-pericfg + - mediatek,mt8365-mcucfg + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt8365-topckgen", "syscon"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml new file mode 100644 index 000000000..81531b5b0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Top Clock Generator Controller + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +description: + The Mediatek topckgen controller provides various clocks to the system. + The clock values can be found in <dt-bindings/clock/mt*-clk.h>. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-topckgen + - mediatek,mt7622-topckgen + - mediatek,mt8135-topckgen + - mediatek,mt8173-topckgen + - mediatek,mt8516-topckgen + - items: + - const: mediatek,mt7623-topckgen + - const: mediatek,mt2701-topckgen + - const: syscon + - items: + - enum: + - mediatek,mt2701-topckgen + - mediatek,mt2712-topckgen + - mediatek,mt6765-topckgen + - mediatek,mt6779-topckgen + - mediatek,mt6795-topckgen + - mediatek,mt7629-topckgen + - mediatek,mt7986-topckgen + - mediatek,mt8167-topckgen + - mediatek,mt8183-topckgen + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt8173-topckgen"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml new file mode 100644 index 000000000..df2bec188 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN966X Generic Clock Controller + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: | + The LAN966X Generic clock controller contains 3 PLLs - cpu_clk, + ddr_clk and sys_clk. This clock controller generates and supplies + clock to various peripherals within the SoC. + +properties: + compatible: + const: microchip,lan966x-gck + + reg: + minItems: 1 + items: + - description: Generic clock registers + - description: Optional gate clock registers + + clocks: + items: + - description: CPU clock source + - description: DDR clock source + - description: System clock source + + clock-names: + items: + - const: cpu + - const: ddr + - const: sys + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clks: clock-controller@e00c00a8 { + compatible = "microchip,lan966x-gck"; + #clock-cells = <1>; + clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>; + clock-names = "cpu", "ddr", "sys"; + reg = <0xe00c00a8 0x38>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml new file mode 100644 index 000000000..f17703607 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of + these blocks contains two PLLs and 2 DLLs & are located in the four corners of + the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at: + https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html + +properties: + compatible: + const: microchip,mpfs-ccc + + reg: + items: + - description: PLL0's control registers + - description: PLL1's control registers + - description: DLL0's control registers + - description: DLL1's control registers + + clocks: + description: + The CCC PLL's have two input clocks. It is required that even if the input + clocks are identical that both are provided. + minItems: 2 + items: + - description: PLL0's refclk0 + - description: PLL0's refclk1 + - description: PLL1's refclk0 + - description: PLL1's refclk1 + - description: DLL0's refclk + - description: DLL1's refclk + + clock-names: + minItems: 2 + items: + - const: pll0_ref0 + - const: pll0_ref1 + - const: pll1_ref0 + - const: pll1_ref1 + - const: dll0_ref + - const: dll1_ref + + '#clock-cells': + const: 1 + description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of + PolarFire clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@38100000 { + compatible = "microchip,mpfs-ccc"; + reg = <0x38010000 0x1000>, <0x38020000 0x1000>, + <0x39010000 0x1000>, <0x39020000 0x1000>; + #clock-cells = <1>; + clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, + <&refclk_ccc>, <&refclk_ccc>; + clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1", + "dll0_ref", "dll1_ref"; + }; diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml new file mode 100644 index 000000000..b2ce78722 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire Clock Control Module Binding + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + +description: | + Microchip PolarFire clock control (CLKCFG) is an integrated clock controller, + which gates and enables all peripheral clocks. + + This device tree binding describes 33 gate clocks. Clocks are referenced by + user nodes by the CLKCFG node phandle and the clock index in the group, from + 0 to 32. + +properties: + compatible: + const: microchip,mpfs-clkcfg + + reg: + items: + - description: | + clock config registers: + These registers contain enable, reset & divider tables for the, cpu, + axi, ahb and rtc/mtimer reference clocks as well as enable and reset + for the peripheral clocks. + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of + PolarFire clock IDs. + + resets: + maxItems: 1 + + '#reset-cells': + description: + The AHB/AXI peripherals on the PolarFire SoC have reset support, so from + CLK_ENVM to CLK_CFM. The reset consumer should specify the desired + peripheral via the clock ID in its "resets" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of + PolarFire clock IDs. + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Config node: + - | + #include <dt-bindings/clock/microchip,mpfs-clock.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + clkcfg: clock-controller@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + clocks = <&ref>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt new file mode 100644 index 000000000..c93d88fdd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt @@ -0,0 +1,39 @@ +Microchip PIC32 Clock Controller Binding +---------------------------------------- +Microchip clock controller is consists of few oscillators, PLL, multiplexer +and few divider modules. + +This binding uses common clock bindings. +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: shall be "microchip,pic32mzda-clk". +- reg: shall contain base address and length of clock registers. +- #clock-cells: shall be 1. + +Optional properties: +- microchip,pic32mzda-sosc: shall be added only if platform has + secondary oscillator connected. + +Example: + rootclk: clock-controller@1f801200 { + compatible = "microchip,pic32mzda-clk"; + reg = <0x1f801200 0x200>; + #clock-cells = <1>; + /* optional */ + microchip,pic32mzda-sosc; + }; + + +The clock consumer shall specify the desired clock-output of the clock +controller (as defined in [2]) by specifying output-id in its "clock" +phandle cell. +[2] include/dt-bindings/clock/microchip,pic32-clock.h + +For example for UART2: +uart2: serial@2 { + compatible = "microchip,pic32mzda-uart"; + reg = <>; + interrupts = <>; + clocks = <&rootclk PB2CLK>; +}; diff --git a/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml new file mode 100644 index 000000000..39559a0a5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 DPLL Clock + +maintainers: + - Lars Povlsen <lars.povlsen@microchip.com> + +description: | + The Sparx5 DPLL clock controller generates and supplies clock to + various peripherals within the SoC. + +properties: + compatible: + const: microchip,sparx5-dpll + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock provider for eMMC: + - | + lcpll_clk: lcpll-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2500000000>; + }; + clks: clock-controller@61110000c { + compatible = "microchip,sparx5-dpll"; + #clock-cells = <1>; + clocks = <&lcpll_clk>; + reg = <0x1110000c 0x24>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml new file mode 100644 index 000000000..6d39344d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Milbeaut SoCs Clock Controller Binding + +maintainers: + - Taichi Sugaya <sugaya.taichi@socionext.com> + +description: | + Milbeaut SoCs Clock controller is an integrated clock controller, which + generates and supplies to all modules. + + This binding uses common clock bindings + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +properties: + compatible: + enum: + - socionext,milbeaut-m10v-ccu + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: external clock + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock controller node: + - | + m10v-clk-ctrl@1d021000 { + compatible = "socionext,milbeaut-m10v-ccu"; + reg = <0x1d021000 0x4000>; + #clock-cells = <1>; + clocks = <&clki40mhz>; + }; + + # Required an external clock for Clock controller node: + - | + clocks { + clki40mhz: clki40mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + /* other clocks */ + }; + + # The clock consumer shall specify the desired clock-output of the clock + # controller as below by specifying output-id in its "clk" phandle cell. + # 2: uart + # 4: 32-bit timer + # 7: UHS-I/II + - | + serial@1e700010 { + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + clocks = <&clk 2>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt new file mode 100644 index 000000000..fedea8431 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt @@ -0,0 +1,48 @@ +Device Tree Clock bindings for arch-moxart + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +MOXA ART SoCs allow to determine PLL output and APB frequencies +by reading registers holding multiplier and divisor information. + + +PLL: + +Required properties: +- compatible : Must be "moxa,moxart-pll-clock" +- #clock-cells : Should be 0 +- reg : Should contain registers location and length +- clocks : Should contain phandle + clock-specifier for the parent clock + +Optional properties: +- clock-output-names : Should contain clock name + + +APB: + +Required properties: +- compatible : Must be "moxa,moxart-apb-clock" +- #clock-cells : Should be 0 +- reg : Should contain registers location and length +- clocks : Should contain phandle + clock-specifier for the parent clock + +Optional properties: +- clock-output-names : Should contain clock name + + +For example: + + clk_pll: clk_pll@98100000 { + compatible = "moxa,moxart-pll-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + }; + + clk_apb: clk_apb@98100000 { + compatible = "moxa,moxart-apb-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + clocks = <&clk_pll>; + }; diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml new file mode 100644 index 000000000..a9ad7ab52 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar/Sigmastar MSC313 CPU PLL + +maintainers: + - Daniel Palmer <daniel@thingy.jp> + +description: | + The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable + PLL that can be used as the clock source for the CPU(s). + +properties: + compatible: + const: mstar,msc313-cpupll + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mstar-msc313-mpll.h> + cpupll: cpupll@206400 { + compatible = "mstar,msc313-cpupll"; + reg = <0x206400 0x200>; + #clock-cells = <1>; + clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>; + }; diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml new file mode 100644 index 000000000..0df5d75d4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mstar,msc313-mpll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar/Sigmastar MSC313 MPLL + +maintainers: + - Daniel Palmer <daniel@thingy.jp> + +description: | + The MStar/SigmaStar MSC313 and later ARMv7 chips have an MPLL block that + takes the external xtal input and multiplies it to create a high + frequency clock and divides that down into a number of clocks that + peripherals use. + +properties: + compatible: + const: mstar,msc313-mpll + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + mpll@206000 { + compatible = "mstar,msc313-mpll"; + reg = <0x206000 0x200>; + #clock-cells = <1>; + clocks = <&xtal>; + }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt new file mode 100644 index 000000000..d8f5c490f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -0,0 +1,87 @@ +* Core Clock bindings for Marvell MVEBU SoCs + +Marvell MVEBU SoCs usually allow to determine core clock frequencies by +reading the Sample-At-Reset (SAR) register. The core clock consumer should +specify the desired clock by having the clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs and clock names on Armada 370/XP: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (L2 Cache clock) + 3 = hclk (DRAM control clock) + 4 = dramclk (DDR clock) + +The following is a list of provided IDs and clock names on Armada 375: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = l2clk (L2 Cache clock) + 3 = ddrclk (DDR clock) + +The following is a list of provided IDs and clock names on Armada 380/385: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = l2clk (L2 Cache clock) + 3 = ddrclk (DDR clock) + +The following is a list of provided IDs and clock names on Armada 39x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (Coherent Fabric clock) + 3 = hclk (SDRAM Controller Internal Clock) + 4 = dclk (SDRAM Interface Clock) + 5 = refclk (Reference Clock) + +The following is a list of provided IDs and clock names on 98dx3236: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = ddrclk (DDR clock) + 3 = mpll (MPLL Clock) + +The following is a list of provided IDs and clock names on Kirkwood and Dove: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = l2clk (L2 Cache clock derived from CPU0 clock) + 3 = ddrclk (DDR controller clock derived from CPU0 clock) + +The following is a list of provided IDs and clock names on Orion5x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = ddrclk (DDR controller clock derived from CPU0 clock) + +Required properties: +- compatible : shall be one of the following: + "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks + "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks + "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks + "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks + "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks + "marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks + "marvell,dove-core-clock" - for Dove SoC core clocks + "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) + "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC + "marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC + "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC + "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC + "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC + "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC +- reg : shall be the register address of the Sample-At-Reset (SAR) register +- #clock-cells : from common clock binding; shall be set to 1 + +Optional properties: +- clock-output-names : from common clock binding; allows overwrite default clock + output names ("tclk", "cpuclk", "l2clk", "ddrclk") + +Example: + +core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clock"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; +}; + +spi0: spi@10600 { + compatible = "marvell,orion-spi"; + /* ... */ + /* get tclk from core clock provider */ + clocks = <&core_clk 0>; +}; diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt new file mode 100644 index 000000000..c7b4e3a6b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt @@ -0,0 +1,23 @@ +* Core Divider Clock bindings for Marvell MVEBU SoCs + +The following is a list of provided IDs and clock names on Armada 370/XP: + 0 = nand (NAND clock) + +Required properties: +- compatible : must be "marvell,armada-370-corediv-clock", + "marvell,armada-375-corediv-clock", + "marvell,armada-380-corediv-clock", + "marvell,mv98dx3236-corediv-clock", + +- reg : must be the register address of Core Divider control register +- #clock-cells : from common clock binding; shall be set to 1 +- clocks : must be set to the parent's phandle + +Example: + +corediv_clk: corediv-clocks@18740 { + compatible = "marvell,armada-370-corediv-clock"; + reg = <0x18740 0xc>; + #clock-cells = <1>; + clocks = <&pll>; +}; diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt new file mode 100644 index 000000000..7f28506ea --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt @@ -0,0 +1,23 @@ +Device Tree Clock bindings for cpu clock of Marvell EBU platforms + +Required properties: +- compatible : shall be one of the following: + "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP + "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC +- reg : Address and length of the clock complex register set, followed + by address and length of the PMU DFS registers +- #clock-cells : should be set to 1. +- clocks : shall be the input parent clock phandle for the clock. + +cpuclk: clock-complex@d0018700 { + #clock-cells = <1>; + compatible = "marvell,armada-xp-cpu-clock"; + reg = <0xd0018700 0xA0>, <0x1c054 0x10>; + clocks = <&coreclk 1>; +} + +cpu@0 { + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; +}; diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt new file mode 100644 index 000000000..de562da2a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -0,0 +1,205 @@ +* Gated Clock bindings for Marvell EBU SoCs + +Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some +peripheral clocks to be gated to save some power. The clock consumer +should specify the desired clock by having the clock ID in its +"clocks" phandle cell. The clock ID is directly mapped to the +corresponding clock gating control bit in HW to ease manual clock +lookup in datasheet. + +The following is a list of provided IDs for Armada 370: +ID Clock Peripheral +----------------------------------- +0 Audio AC97 Cntrl +1 pex0_en PCIe 0 Clock out +2 pex1_en PCIe 1 Clock out +3 ge1 Gigabit Ethernet 1 +4 ge0 Gigabit Ethernet 0 +5 pex0 PCIe Cntrl 0 +9 pex1 PCIe Cntrl 1 +15 sata0 SATA Host 0 +17 sdio SDHCI Host +23 crypto CESA (crypto engine) +25 tdm Time Division Mplx +28 ddr DDR Cntrl +30 sata1 SATA Host 0 + +The following is a list of provided IDs for Armada 375: +ID Clock Peripheral +----------------------------------- +2 mu Management Unit +3 pp Packet Processor +4 ptp PTP +5 pex0 PCIe 0 Clock out +6 pex1 PCIe 1 Clock out +8 audio Audio Cntrl +11 nd_clk Nand Flash Cntrl +14 sata0_link SATA 0 Link +15 sata0_core SATA 0 Core +16 usb3 USB3 Host +17 sdio SDHCI Host +18 usb USB Host +19 gop Gigabit Ethernet MAC +20 sata1_link SATA 1 Link +21 sata1_core SATA 1 Core +22 xor0 XOR DMA 0 +23 xor1 XOR DMA 0 +24 copro Coprocessor +25 tdm Time Division Mplx +28 crypto0_enc Cryptographic Unit Port 0 Encryption +29 crypto0_core Cryptographic Unit Port 0 Core +30 crypto1_enc Cryptographic Unit Port 1 Encryption +31 crypto1_core Cryptographic Unit Port 1 Core + +The following is a list of provided IDs for Armada 380/385: +ID Clock Peripheral +----------------------------------- +0 audio Audio +2 ge2 Gigabit Ethernet 2 +3 ge1 Gigabit Ethernet 1 +4 ge0 Gigabit Ethernet 0 +5 pex1 PCIe 1 +6 pex2 PCIe 2 +7 pex3 PCIe 3 +8 pex0 PCIe 0 +9 usb3h0 USB3 Host 0 +10 usb3h1 USB3 Host 1 +11 usb3d USB3 Device +13 bm Buffer Management +14 crypto0z Cryptographic 0 Z +15 sata0 SATA 0 +16 crypto1z Cryptographic 1 Z +17 sdio SDIO +18 usb2 USB 2 +21 crypto1 Cryptographic 1 +22 xor0 XOR 0 +23 crypto0 Cryptographic 0 +25 tdm Time Division Multiplexing +28 xor1 XOR 1 +30 sata1 SATA 1 + +The following is a list of provided IDs for Armada 39x: +ID Clock Peripheral +----------------------------------- +5 pex1 PCIe 1 +6 pex2 PCIe 2 +7 pex3 PCIe 3 +8 pex0 PCIe 0 +9 usb3h0 USB3 Host 0 +10 usb3h1 USB3 Host 1 +15 sata0 SATA 0 +17 sdio SDIO +22 xor0 XOR 0 +28 xor1 XOR 1 + +The following is a list of provided IDs for Armada XP: +ID Clock Peripheral +----------------------------------- +0 audio Audio Cntrl +1 ge3 Gigabit Ethernet 3 +2 ge2 Gigabit Ethernet 2 +3 ge1 Gigabit Ethernet 1 +4 ge0 Gigabit Ethernet 0 +5 pex0 PCIe Cntrl 0 +6 pex1 PCIe Cntrl 1 +7 pex2 PCIe Cntrl 2 +8 pex3 PCIe Cntrl 3 +13 bp +14 sata0lnk +15 sata0 SATA Host 0 +16 lcd LCD Cntrl +17 sdio SDHCI Host +18 usb0 USB Host 0 +19 usb1 USB Host 1 +20 usb2 USB Host 2 +22 xor0 XOR DMA 0 +23 crypto CESA engine +25 tdm Time Division Mplx +28 xor1 XOR DMA 1 +29 sata1lnk +30 sata1 SATA Host 1 + +The following is a list of provided IDs for 98dx3236: +ID Clock Peripheral +----------------------------------- +3 ge1 Gigabit Ethernet 1 +4 ge0 Gigabit Ethernet 0 +5 pex0 PCIe Cntrl 0 +17 sdio SDHCI Host +18 usb0 USB Host 0 +22 xor0 XOR DMA 0 + +The following is a list of provided IDs for Dove: +ID Clock Peripheral +----------------------------------- +0 usb0 USB Host 0 +1 usb1 USB Host 1 +2 ge Gigabit Ethernet +3 sata SATA Host +4 pex0 PCIe Cntrl 0 +5 pex1 PCIe Cntrl 1 +8 sdio0 SDHCI Host 0 +9 sdio1 SDHCI Host 1 +10 nand NAND Cntrl +11 camera Camera Cntrl +12 i2s0 I2S Cntrl 0 +13 i2s1 I2S Cntrl 1 +15 crypto CESA engine +21 ac97 AC97 Cntrl +22 pdma Peripheral DMA +23 xor0 XOR DMA 0 +24 xor1 XOR DMA 1 +30 gephy Gigabit Ethernel PHY +Note: gephy(30) is implemented as a parent clock of ge(2) + +The following is a list of provided IDs for Kirkwood: +ID Clock Peripheral +----------------------------------- +0 ge0 Gigabit Ethernet 0 +2 pex0 PCIe Cntrl 0 +3 usb0 USB Host 0 +4 sdio SDIO Cntrl +5 tsu Transp. Stream Unit +6 dunit SDRAM Cntrl +7 runit Runit +8 xor0 XOR DMA 0 +9 audio I2S Cntrl 0 +14 sata0 SATA Host 0 +15 sata1 SATA Host 1 +16 xor1 XOR DMA 1 +17 crypto CESA engine +18 pex1 PCIe Cntrl 1 +19 ge1 Gigabit Ethernet 1 +20 tdm Time Division Mplx + +Required properties: +- compatible : shall be one of the following: + "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating + "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating + "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating + "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating + "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating + "marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating + "marvell,dove-gating-clock" - for Dove SoC clock gating + "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating +- reg : shall be the register address of the Clock Gating Control register +- #clock-cells : from common clock binding; shall be set to 1 + +Optional properties: +- clocks : default parent clock phandle (e.g. tclk) + +Example: + +gate_clk: clock-gating-control@d0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0xd0038 0x4>; + /* default parent clock is tclk */ + clocks = <&core_clk 0>; + #clock-cells = <1>; +}; + +sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + /* get clk gate bit 8 (sdio0) */ + clocks = <&gate_clk 8>; +}; diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt new file mode 100644 index 000000000..7c3bc8bb5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nspire-clock.txt @@ -0,0 +1,24 @@ +TI-NSPIRE Clocks + +Required properties: +- compatible: Valid compatible properties include: + "lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model + "lsi,nspire-classic-ahb-divider" for the AHB divider in the older model + "lsi,nspire-cx-clock" for the base clock in the CX model + "lsi,nspire-classic-clock" for the base clock in the older model + +- reg: Physical base address of the controller and length of memory mapped + region. + +Optional: +- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent + clock where it divides the rate from. + +Example: + +ahb_clk { + #clock-cells = <0>; + compatible = "lsi,nspire-cx-clock"; + reg = <0x900B0000 0x4>; + clocks = <&base_clk>; +}; diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt new file mode 100644 index 000000000..f82064546 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt @@ -0,0 +1,100 @@ +* Nuvoton NPCM7XX Clock Controller + +Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which +generates and supplies clocks to all modules within the BMC. + +External clocks: + +There are six fixed clocks that are generated outside the BMC. All clocks are of +a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and +clk_sysbypck are inputs to the clock controller. +clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the +network. They are set on the device tree, but not used by the clock module. The +network devices use them directly. +Example can be found below. + +All available clocks are defined as preprocessor macros in: +dt-bindings/clock/nuvoton,npcm7xx-clock.h +and can be reused as DT sources. + +Required Properties of clock controller: + + - compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton + Poleg BMC NPCM750 + + - reg: physical base address of the clock controller and length of + memory mapped region. + + - #clock-cells: should be 1. + +Example: Clock controller node: + + clk: clock-controller@f0801000 { + compatible = "nuvoton,npcm750-clk"; + #clock-cells = <1>; + reg = <0xf0801000 0x1000>; + clock-names = "refclk", "sysbypck", "mcbypck"; + clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; + }; + +Example: Required external clocks for network: + + /* external reference clock */ + clk_refclk: clk-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "refclk"; + }; + + /* external reference clock for cpu. float in normal operation */ + clk_sysbypck: clk-sysbypck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <800000000>; + clock-output-names = "sysbypck"; + }; + + /* external reference clock for MC. float in normal operation */ + clk_mcbypck: clk-mcbypck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <800000000>; + clock-output-names = "mcbypck"; + }; + + /* external clock signal rg1refck, supplied by the phy */ + clk_rg1refck: clk-rg1refck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "clk_rg1refck"; + }; + + /* external clock signal rg2refck, supplied by the phy */ + clk_rg2refck: clk-rg2refck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "clk_rg2refck"; + }; + + clk_xin: clk-xin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "clk_xin"; + }; + + +Example: GMAC controller node that consumes two clocks: a generated clk by the +clock controller and a fixed clock from DT (clk_rg1refck). + + ethernet0: ethernet@f0802000 { + compatible = "snps,dwmac"; + reg = <0xf0802000 0x2000>; + interrupts = <0 14 4>; + interrupt-names = "macirq"; + clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; + clock-names = "stmmaceth", "clk_gmac"; + }; diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml new file mode 100644 index 000000000..771db2ddf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM8XX Clock Controller Binding + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +description: | + Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which + generates and supplies clocks to all modules within the BMC. + +properties: + compatible: + enum: + - nuvoton,npcm845-clk + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full + list of NPCM8XX clock IDs. + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + ahb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@f0801000 { + compatible = "nuvoton,npcm845-clk"; + reg = <0x0 0xf0801000 0x0 0x1000>; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml new file mode 100644 index 000000000..1b2181f6d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Clock and Reset Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Clock and Reset (CAR) is the HW module responsible for muxing and gating + Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units. + + CLKGEN provides the registers to program the PLLs. It controls most of + the clock source programming and most of the clock dividers. + + CLKGEN input signals include the external clock for the reference frequency + (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz). + + Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system. + + RSTGEN provides the registers needed to control resetting of each block in + the Tegra system. + +properties: + compatible: + const: nvidia,tegra124-car + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + "#reset-cells": + const: 1 + + nvidia,external-memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the external memory controller node + +patternProperties: + "^emc-timings-[0-9]+$": + type: object + properties: + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that + this timing set is used for + + patternProperties: + "^timing-[0-9]+$": + type: object + properties: + clock-frequency: + description: + external memory clock rate in Hz + minimum: 1000000 + maximum: 1000000000 + + nvidia,parent-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + rate of parent clock in Hz + minimum: 1000000 + maximum: 1000000000 + + clocks: + items: + - description: parent clock of EMC + + clock-names: + items: + - const: emc-parent + + required: + - clock-frequency + - nvidia,parent-clock-frequency + - clocks + - clock-names + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + + car: clock-controller@60006000 { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt new file mode 100644 index 000000000..958e0ad78 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -0,0 +1,155 @@ +NVIDIA Tegra124 DFLL FCPU clocksource + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The DFLL IP block on Tegra is a root clocksource designed for clocking +the fast CPU cluster. It consists of a free-running voltage controlled +oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop +control module that will automatically adjust the VDD_CPU voltage by +communicating with an off-chip PMIC either via an I2C bus or via PWM signals. + +Required properties: +- compatible : should be one of: + - "nvidia,tegra124-dfll": for Tegra124 + - "nvidia,tegra210-dfll": for Tegra210 +- reg : Defines the following set of registers, in the order listed: + - registers for the DFLL control logic. + - registers for the I2C output logic. + - registers for the integrated I2C master controller. + - look-up table RAM for voltage register values. +- interrupts: Should contain the DFLL block interrupt. +- clocks: Must contain an entry for each entry in clock-names. + See clock-bindings.txt for details. +- clock-names: Must include the following entries: + - soc: Clock source for the DFLL control logic. + - ref: The closed loop reference clock + - i2c: Clock source for the integrated I2C master. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - dvco: Reset control for the DFLL DVCO. +- #clock-cells: Must be 0. +- clock-output-names: Name of the clock output. +- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL + hardware will start controlling. The regulator will be queried for + the I2C register, control values and supported voltages. + +Required properties for the control loop parameters: +- nvidia,sample-rate: Sample rate of the DFLL control loop. +- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM. +- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM. +- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM. +- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM. +- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM. + +Optional properties for the control loop parameters: +- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM. + +Optional properties for mode selection: +- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C. + +Required properties for I2C mode: +- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode. + +Required properties for PWM mode: +- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds. +- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM + control is disabled and the PWM output is tristated. Note that this voltage is + configured in hardware, typically via a resistor divider. +- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control + is enabled and PWM output is low. Hence, this is the minimum output voltage + that the regulator supports when PWM control is enabled. +- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts + corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th + duty cycle would be: nvidia,pwm-min-microvolts + + nvidia,pwm-voltage-step-microvolts * 2. +- pinctrl-0: I/O pad configuration when PWM control is enabled. +- pinctrl-1: I/O pad configuration when PWM control is disabled. +- pinctrl-names: must include the following entries: + - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled. + - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled. + +Example for I2C: + +clock@70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>, + <&tegra_car TEGRA124_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + vdd-cpu-supply = <&vdd_cpu>; + + nvidia,sample-rate = <12500>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <10>; + nvidia,ci = <0>; + nvidia,cg = <2>; + + nvidia,i2c-fs-rate = <400000>; +}; + +Example for PWM: + +clock@70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>, + <&tegra_car TEGRA210_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>;; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + + nvidia,sample-rate = <25000>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + + nvidia,pwm-min-microvolts = <708000>; /* 708mV */ + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */ + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; +}; + +/* pinmux nodes added for completeness. Binding doc can be found in: + * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt + */ + +pinmux: pinmux@700008d4 { + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml new file mode 100644 index 000000000..bee2dd4b2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Clock and Reset Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Clock and Reset (CAR) is the HW module responsible for muxing and gating + Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units. + + CLKGEN provides the registers to program the PLLs. It controls most of + the clock source programming and most of the clock dividers. + + CLKGEN input signals include the external clock for the reference frequency + (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz). + + Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system. + + RSTGEN provides the registers needed to control resetting of each block in + the Tegra system. + +properties: + compatible: + enum: + - nvidia,tegra20-car + - nvidia,tegra30-car + - nvidia,tegra114-car + - nvidia,tegra210-car + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + "#reset-cells": + const: 1 + +patternProperties: + "^(sclk)|(pll-[cem])$": + type: object + properties: + compatible: + enum: + - nvidia,tegra20-sclk + - nvidia,tegra30-sclk + - nvidia,tegra30-pllc + - nvidia,tegra30-plle + - nvidia,tegra30-pllm + + operating-points-v2: true + + clocks: + items: + - description: node's clock + + power-domains: + maxItems: 1 + description: phandle to the core SoC power domain + + required: + - compatible + - operating-points-v2 + - clocks + - power-domains + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + + car: clock-controller@60006000 { + compatible = "nvidia,tegra20-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + + sclk { + compatible = "nvidia,tegra20-sclk"; + operating-points-v2 = <&opp_table>; + clocks = <&tegra_car TEGRA20_CLK_SCLK>; + power-domains = <&domain>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt new file mode 100644 index 000000000..20cbca3f4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt @@ -0,0 +1,30 @@ +NXP LPC32xx Clock Controller + +Required properties: +- compatible: should be "nxp,lpc3220-clk" +- reg: should contain clock controller registers location and length +- #clock-cells: must be 1, the cell holds id of a clock provided by the + clock controller +- clocks: phandles of external oscillators, the list must contain one + 32768 Hz oscillator and may have one optional high frequency oscillator +- clock-names: list of external oscillator clock names, must contain + "xtal_32k" and may have optional "xtal" + +Examples: + + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt new file mode 100644 index 000000000..0aa249409 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt @@ -0,0 +1,22 @@ +NXP LPC32xx USB Clock Controller + +Required properties: +- compatible: should be "nxp,lpc3220-usb-clk" +- reg: should contain clock controller registers location and length +- #clock-cells: must be 1, the cell holds id of a clock provided by the + USB clock controller + +Examples: + + usb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x31020000 0x00001000>; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt new file mode 100644 index 000000000..b652f3fb7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt @@ -0,0 +1,28 @@ +Oxford Semiconductor OXNAS SoC Family Standard Clocks +================================================ + +Please also refer to clock-bindings.txt in this directory for common clock +bindings usage. + +Required properties: +- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk" + For OX820, should be "oxsemi,ox820-stdclk" +- #clock-cells: 1, see below + +Parent node should have the following properties : +- compatible: For OX810SE, should be + "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + For OX820, should be + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" + +example: + +sys: sys-ctrl@000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + stdclk: stdclk { + compatible = "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt new file mode 100644 index 000000000..868db499e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pistachio-clock.txt @@ -0,0 +1,123 @@ +Imagination Technologies Pistachio SoC clock controllers +======================================================== + +Pistachio has four clock controllers (core clock, peripheral clock, peripheral +general control, and top general control) which are instantiated individually +from the device-tree. + +External clocks: +---------------- + +There are three external inputs to the clock controllers which should be +defined with the following clock-output-names: +- "xtal": External 52Mhz oscillator (required) +- "audio_clk_in": Alternate audio reference clock (optional) +- "enet_clk_in": Alternate ethernet PHY clock (optional) + +Core clock controller: +---------------------- + +The core clock controller generates clocks for the CPU, RPU (WiFi + BT +co-processor), audio, and several peripherals. + +Required properties: +- compatible: Must be "img,pistachio-clk". +- reg: Must contain the base address and length of the core clock controller. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "xtal" (see "External clocks") and + "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the + top-level general control. + +Example: + clk_core: clock-controller@18144000 { + compatible = "img,pistachio-clk"; + reg = <0x18144000 0x800>; + clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>, + <&cr_top EXT_CLK_ENET_IN>; + clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate"; + + #clock-cells = <1>; + }; + +Peripheral clock controller: +---------------------------- + +The peripheral clock controller generates clocks for the DDR, ROM, and other +peripherals. The peripheral system clock ("periph_sys") generated by the core +clock controller is the input clock to the peripheral clock controller. + +Required properties: +- compatible: Must be "img,pistachio-periph-clk". +- reg: Must contain the base address and length of the peripheral clock + controller. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "periph_sys", the peripheral system clock generated + by the core clock controller. + +Example: + clk_periph: clock-controller@18144800 { + compatible = "img,pistachio-clk-periph"; + reg = <0x18144800 0x800>; + clocks = <&clk_core CLK_PERIPH_SYS>; + clock-names = "periph_sys"; + + #clock-cells = <1>; + }; + +Peripheral general control: +--------------------------- + +The peripheral general control block generates system interface clocks and +resets for various peripherals. It also contains miscellaneous peripheral +control registers. The system clock ("sys") generated by the peripheral clock +controller is the input clock to the system clock controller. + +Required properties: +- compatible: Must include "img,pistachio-periph-cr" and "syscon". +- reg: Must contain the base address and length of the peripheral general + control registers. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "sys", the system clock generated by the peripheral + clock controller. + +Example: + cr_periph: syscon@18144800 { + compatible = "img,pistachio-cr-periph", "syscon"; + reg = <0x18148000 0x1000>; + clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>; + clock-names = "sys"; + + #clock-cells = <1>; + }; + +Top-level general control: +-------------------------- + +The top-level general control block contains miscellaneous control registers and +gates for the external clocks "audio_clk_in" and "enet_clk_in". + +Required properties: +- compatible: Must include "img,pistachio-cr-top" and "syscon". +- reg: Must contain the base address and length of the top-level + control registers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see + "External clocks"). +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. + +Example: + cr_top: syscon@18144800 { + compatible = "img,pistachio-cr-top", "syscon"; + reg = <0x18149000 0x200>; + clocks = <&audio_refclk>, <&ext_enet_in>; + clock-names = "audio_clk_in", "enet_clk_in"; + + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt new file mode 100644 index 000000000..83db876b3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt @@ -0,0 +1,26 @@ +Binding for an external clock signal driven by a PWM pin. + +This binding uses the common clock binding[1] and the common PWM binding[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/pwm/pwm.txt + +Required properties: +- compatible : shall be "pwm-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- pwms : from common PWM binding; this determines the clock frequency + via the period given in the PWM specifier. + +Optional properties: +- clock-output-names : From common clock binding. +- clock-frequency : Exact output frequency, in case the PWM period + is not exact but was rounded to nanoseconds. + +Example: + clock { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "mipi_mclk"; + pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */ + }; diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt new file mode 100644 index 000000000..8f6723941 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt @@ -0,0 +1,15 @@ +* Clock bindings for Marvell PXA chips + +Required properties: +- compatible: Should be "marvell,pxa-clocks" +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell (see include/.../pxa-clock.h). + +Examples: + +pxa2xx_clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa-clocks"; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt new file mode 100644 index 000000000..241fb0545 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt @@ -0,0 +1,33 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller + +The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB. + +Required Properties: +- compatible: has to be "qca,<soctype>-pll" and one of the following + fallbacks: + - "qca,ar7100-pll" + - "qca,ar7240-pll" + - "qca,ar9130-pll" + - "qca,ar9330-pll" + - "qca,ar9340-pll" + - "qca,qca9550-pll" +- reg: Base address and size of the controllers memory area +- clock-names: Name of the input clock, has to be "ref" +- clocks: phandle of the external reference clock +- #clock-cells: has to be one + +Optional properties: +- clock-output-names: should be "cpu", "ddr", "ahb" + +Example: + + pll-controller@18050000 { + compatible = "qca,ar9132-pll", "qca,ar9130-pll"; + reg = <0x18050000 0x20>; + + clock-names = "ref"; + clocks = <&extosc>; + + #clock-cells = <1>; + clock-output-names = "cpu", "ddr", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml new file mode 100644 index 000000000..fe6ca4f68 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm A53 PLL Binding + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for + frequencies above 1GHz. + +properties: + compatible: + enum: + - qcom,ipq6018-a53pll + - qcom,ipq8074-a53pll + - qcom,msm8916-a53pll + - qcom,msm8939-a53pll + + reg: + maxItems: 1 + + '#clock-cells': + const: 0 + + clocks: + items: + - description: board XO clock + + clock-names: + items: + - const: xo + + operating-points-v2: true + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + #Example 1 - A53 PLL found on MSM8916 devices + - | + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0xb016000 0x40>; + #clock-cells = <0>; + }; + #Example 2 - A53 PLL found on IPQ6018 devices + - | + a53pll_ipq: clock-controller@b116000 { + compatible = "qcom,ipq6018-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo>; + clock-names = "xo"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml new file mode 100644 index 000000000..0e96f693b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm A7 PLL Binding + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high + frequency clock to the CPU. + +properties: + compatible: + enum: + - qcom,sdx55-a7pll + + reg: + maxItems: 1 + + '#clock-cells': + const: 0 + + clocks: + items: + - description: board XO clock + + clock-names: + items: + - const: bi_tcxo + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml new file mode 100644 index 000000000..c40a74b5d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list + of Audio Clock controller clock IDs. + +properties: + compatible: + const: qcom,sm8250-lpass-aon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: LPASS Core voting clock + - description: Glitch Free Mux register clock + + clock-names: + items: + - const: core + - const: bus + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> + #include <dt-bindings/sound/qcom,q6afe.h> + clock-controller@3800000 { + #clock-cells = <1>; + compatible = "qcom,sm8250-lpass-aon"; + reg = <0x03380000 0x40000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "bus"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml new file mode 100644 index 000000000..915d76206 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list + of Audio Clock controller clock IDs. + +properties: + compatible: + const: qcom,sm8250-lpass-audiocc + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: LPASS Core voting clock + - description: Glitch Free Mux register clock + + clock-names: + items: + - const: core + - const: bus + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> + #include <dt-bindings/sound/qcom,q6afe.h> + clock-controller@3300000 { + #clock-cells = <1>; + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0x03300000 0x30000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "bus"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml new file mode 100644 index 000000000..9f239c396 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SM8250 + +maintainers: + - Jonathan Marek <jonathan@marek.ca> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SM8250. + + See also dt-bindings/clock/qcom,camcc-sm8250.h + +properties: + compatible: + const: qcom,sm8250-camcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml new file mode 100644 index 000000000..7a03ef19c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock Controller Binding for SM6125 + +maintainers: + - Martin Botka <martin.botka@somainline.org> + +description: | + Qualcomm display clock control module which supports the clocks and + power domains on SM6125. + + See also: + dt-bindings/clock/qcom,dispcc-sm6125.h + +properties: + compatible: + enum: + - qcom,sm6125-dispcc + + clocks: + items: + - description: Board XO source + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + - description: AHB config clock from GCC + + clock-names: + items: + - const: bi_tcxo + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dsi1_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + - const: cfg_ahb_clk + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6125.h> + clock-controller@5f00000 { + compatible = "qcom,sm6125-dispcc"; + reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>, + <&gcc GCC_DISP_AHB_CLK>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "cfg_ahb_clk"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml new file mode 100644 index 000000000..e706678b3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SM6350 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SM6350. + + See also dt-bindings/clock/qcom,dispcc-sm6350.h. + +properties: + compatible: + const: qcom,sm6350-dispcc + + clocks: + items: + - description: Board XO source + - description: GPLL0 source from GCC + - description: Byte clock from DSI PHY + - description: Pixel clock from DSI PHY + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: gcc_disp_gpll0_clk + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm6350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sm6350-dispcc"; + reg = <0x0af00000 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK>, + <&dsi_phy 0>, + <&dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml new file mode 100644 index 000000000..7a8d375e0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350 + +maintainers: + - Jonathan Marek <jonathan@marek.ca> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SM8150/SM8250/SM8350. + + See also: + dt-bindings/clock/qcom,dispcc-sm8150.h + dt-bindings/clock/qcom,dispcc-sm8250.h + dt-bindings/clock/qcom,dispcc-sm8350.h + +properties: + compatible: + enum: + - qcom,sc8180x-dispcc + - qcom,sm8150-dispcc + - qcom,sm8250-dispcc + - qcom,sm8350-dispcc + + clocks: + items: + - description: Board XO source + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dsi1_phy_pll_out_byteclk + - const: dsi1_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + power-domains: + description: + A phandle and PM domain specifier for the MMCX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@af00000 { + compatible = "qcom,sm8250-dispcc"; + reg = <0x0af00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml new file mode 100644 index 000000000..6b4efd64c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for APQ8064/MSM8960 + +allOf: + - $ref: qcom,gcc.yaml# + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on APQ8064. + + See also: + - dt-bindings/clock/qcom,gcc-msm8960.h + - dt-bindings/reset/qcom,gcc-msm8960.h + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,gcc-apq8064 + - qcom,gcc-msm8960 + - const: syscon + - enum: + - qcom,gcc-apq8064 + - qcom,gcc-msm8960 + deprecated: true + + thermal-sensor: + description: child tsens device + $ref: /schemas/thermal/qcom-tsens.yaml# + + clocks: + maxItems: 3 + + clock-names: + items: + - const: cxo + - const: pxo + - const: pll4 + + nvmem-cells: + minItems: 1 + maxItems: 2 + deprecated: true + description: + Qualcomm TSENS (thermal sensor device) on some devices can + be part of GCC and hence the TSENS properties can also be part + of the GCC/clock-controller node. + For more details on the TSENS properties please refer + Documentation/devicetree/bindings/thermal/qcom-tsens.yaml + + nvmem-cell-names: + minItems: 1 + deprecated: true + items: + - const: calib + - const: calib_backup + + '#thermal-sensor-cells': + const: 1 + deprecated: true + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + clock-controller@900000 { + compatible = "qcom,gcc-apq8064", "syscon"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <0 178 4>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml new file mode 100644 index 000000000..397fb918e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for APQ8084 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on APQ8084. + + See also:: + - dt-bindings/clock/qcom,gcc-apq8084.h + - dt-bindings/reset/qcom,gcc-apq8084.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + const: qcom,gcc-apq8084 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + reg = <0xfc400000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml new file mode 100644 index 000000000..9eb91dd22 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064 + +allOf: + - $ref: qcom,gcc.yaml# + +maintainers: + - Ansuel Smith <ansuelsmth@gmail.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on IPQ8064. + + See also: + - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + +properties: + compatible: + items: + - const: qcom,gcc-ipq8064 + - const: syscon + + clocks: + items: + - description: PXO source + - description: CXO source + + clock-names: + items: + - const: pxo + - const: cxo + + thermal-sensor: + type: object + + allOf: + - $ref: /schemas/thermal/qcom-tsens.yaml# + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064", "syscon"; + reg = <0x00900000 0x4000>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + tsens: thermal-sensor { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml new file mode 100644 index 000000000..21470f52c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on IPQ8074. + + See also: + - dt-bindings/clock/qcom,gcc-ipq8074.h + +properties: + compatible: + const: qcom,gcc-ipq8074 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + '#reset-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml new file mode 100644 index 000000000..09b2ea60d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8660 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module which supports the clocks and resets on + MSM8660 + + See also: + - dt-bindings/clock/qcom,gcc-msm8660.h + - dt-bindings/reset/qcom,gcc-msm8660.h + +allOf: + - $ref: "qcom,gcc.yaml#" + +properties: + compatible: + enum: + - qcom,gcc-msm8660 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pxo + - const: cxo + +required: + - compatible + +unevaluatedProperties: false + +examples: + # Example for GCC for MSM8974: + - | + clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + reg = <0x900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml new file mode 100644 index 000000000..2272ea5f7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8909 + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8909. + + See also: + - dt-bindings/clock/qcom,gcc-msm8909.h + +properties: + compatible: + const: qcom,gcc-msm8909 + + clocks: + items: + - description: XO source + - description: Sleep clock source + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + + clock-names: + items: + - const: xo + - const: sleep_clk + - const: dsi0pll + - const: dsi0pllbyte + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8909"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>; + clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml new file mode 100644 index 000000000..2ceb1e501 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8916 and MSM8939 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8916 or MSM8939. + + See also: + - dt-bindings/clock/qcom,gcc-msm8916.h + - dt-bindings/clock/qcom,gcc-msm8939.h + - dt-bindings/reset/qcom,gcc-msm8916.h + - dt-bindings/reset/qcom,gcc-msm8939.h + +properties: + compatible: + enum: + - qcom,gcc-msm8916 + - qcom,gcc-msm8939 + + clocks: + items: + - description: XO source + - description: Sleep clock source + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + - description: External MCLK clock + - description: External Primary I2S clock + - description: External Secondary I2S clock + + clock-names: + items: + - const: xo + - const: sleep_clk + - const: dsi0pll + - const: dsi0pllbyte + - const: ext_mclk + - const: ext_pri_i2s + - const: ext_sec_i2s + +required: + - compatible + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@300000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x300000 0x90000>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml new file mode 100644 index 000000000..4b7d69518 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8976 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8976. + + See also: + - dt-bindings/clock/qcom,gcc-msm8976.h + +properties: + compatible: + enum: + - qcom,gcc-msm8976 + - qcom,gcc-msm8976-v1.1 + + clocks: + items: + - description: XO source + - description: Always-on XO source + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY1 + - description: Byte clock from DSI PHY1 + + clock-names: + items: + - const: xo + - const: xo_a + - const: dsi0pll + - const: dsi0pllbyte + - const: dsi1pll + - const: dsi1pllbyte + + vdd_gfx-supply: + description: + Phandle to voltage regulator providing power to the GX domain. + +required: + - compatible + - clocks + - clock-names + - vdd_gfx-supply + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-msm8976"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x1800000 0x80000>; + + clocks = <&xo_board>, + <&xo_board>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>; + + clock-names = "xo", + "xo_a", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + + vdd_gfx-supply = <&pm8004_s5>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml new file mode 100644 index 000000000..7b9fef6d9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8994 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8994 and MSM8992. + + See also: + - dt-bindings/clock/qcom,gcc-msm8994.h + +properties: + compatible: + enum: + - qcom,gcc-msm8992 + - qcom,gcc-msm8994 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: xo + - const: sleep + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@300000 { + compatible = "qcom,gcc-msm8994"; + reg = <0x00300000 0x90000>; + clocks = <&xo_board>, <&sleep_clk>; + clock-names = "xo", "sleep"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml new file mode 100644 index 000000000..dfc5165db --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8996 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8996. + + See also: + - dt-bindings/clock/qcom,gcc-msm8996.h + +properties: + compatible: + const: qcom,gcc-msm8996 + + clocks: + minItems: 3 + items: + - description: XO source + - description: Second XO source + - description: Sleep clock source + - description: PCIe 0 PIPE clock (optional) + - description: PCIe 1 PIPE clock (optional) + - description: PCIe 2 PIPE clock (optional) + - description: USB3 PIPE clock (optional) + - description: UFS RX symbol 0 clock (optional) + - description: UFS RX symbol 1 clock (optional) + - description: UFS TX symbol 0 clock (optional) + + clock-names: + minItems: 3 + items: + - const: cxo + - const: cxo2 + - const: sleep_clk + - const: pcie_0_pipe_clk_src + - const: pcie_1_pipe_clk_src + - const: pcie_2_pipe_clk_src + - const: usb3_phy_pipe_clk_src + - const: ufs_rx_symbol_0_clk_src + - const: ufs_rx_symbol_1_clk_src + - const: ufs_tx_symbol_0_clk_src + +required: + - compatible + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x300000 0x90000>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml new file mode 100644 index 000000000..544a2335c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8998 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8998. + + See also: + - dt-bindings/clock/qcom,gcc-msm8998.h + +properties: + compatible: + const: qcom,gcc-msm8998 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: Audio reference clock (Optional clock) + - description: PLL test clock source (Optional clock) + minItems: 2 + + clock-names: + items: + - const: xo + - const: sleep_clk + - const: aud_ref_clk # Optional clock + - const: core_bi_pll_test_se # Optional clock + minItems: 2 + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0xb0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "aud_ref_clk", + "core_bi_pll_test_se"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml new file mode 100644 index 000000000..76988e04c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains. + + See also: + - dt-bindings/clock/qcom,gcc-ipq4019.h + - dt-bindings/clock/qcom,gcc-ipq6018.h + - dt-bindings/reset/qcom,gcc-ipq6018.h + - dt-bindings/clock/qcom,gcc-msm8953.h + - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) + - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) + - dt-bindings/clock/qcom,gcc-mdm9607.h + - dt-bindings/clock/qcom,gcc-mdm9615.h + - dt-bindings/reset/qcom,gcc-mdm9615.h + - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) + +allOf: + - $ref: "qcom,gcc.yaml#" + +properties: + compatible: + enum: + - qcom,gcc-ipq4019 + - qcom,gcc-ipq6018 + - qcom,gcc-mdm9607 + - qcom,gcc-msm8226 + - qcom,gcc-msm8953 + - qcom,gcc-msm8974 + - qcom,gcc-msm8974pro + - qcom,gcc-msm8974pro-ac + - qcom,gcc-mdm9615 + - qcom,gcc-sdm630 + - qcom,gcc-sdm660 + +required: + - compatible + +unevaluatedProperties: false + +examples: + # Example for GCC for MSM8974: + - | + clock-controller@900000 { + compatible = "qcom,gcc-msm8974"; + reg = <0x900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml new file mode 100644 index 000000000..aec37e3f5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for QCM2290 + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets + and power domains on QCM2290. + + See also: + - dt-bindings/clock/qcom,gcc-qcm2290.h + +properties: + compatible: + const: qcom,gcc-qcm2290 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml new file mode 100644 index 000000000..ce06f3f8c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on QCS404. + + See also: + - dt-bindings/clock/qcom,gcc-qcs404.h + +properties: + compatible: + const: qcom,gcc-qcs404 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-qcs404"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml new file mode 100644 index 000000000..e4d490e65 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC7180 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,gcc-sc7180.h + +properties: + compatible: + const: qcom,gcc-sc7180 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc7180"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml new file mode 100644 index 000000000..ea61367e5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,gcc-sc7280.h + +properties: + compatible: + const: qcom,gcc-sc7280 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + - description: PCIE-0 pipe clock source + - description: PCIE-1 pipe clock source + - description: USF phy rx symbol 0 clock source + - description: USF phy rx symbol 1 clock source + - description: USF phy tx symbol 0 clock source + - description: USB30 phy wrapper pipe clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + - const: pcie_0_pipe_clk + - const: pcie_1_pipe_clk + - const: ufs_phy_rx_symbol_0_clk + - const: ufs_phy_rx_symbol_1_clk + - const: ufs_phy_tx_symbol_0_clk + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc7280"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_0_pipe_clk>, <&pcie_1_pipe_clk>, + <&ufs_phy_rx_symbol_0_clk>, <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <&usb3_phy_wrapper_gcc_usb30_pipe_clk>; + + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", + "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml new file mode 100644 index 000000000..30b5d1215 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC8180x + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC8180x. + + See also: + - dt-bindings/clock/qcom,gcc-sc8180x.h + +properties: + compatible: + const: qcom,gcc-sc8180x + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc8180x"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml new file mode 100644 index 000000000..b1bf76853 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC8280xp. + + See also: + - include/dt-bindings/clock/qcom,gcc-sc8280xp.h + +properties: + compatible: + const: qcom,gcc-sc8280xp + + clocks: + items: + - description: XO reference clock + - description: Sleep clock + - description: UFS memory first RX symbol clock + - description: UFS memory second RX symbol clock + - description: UFS memory first TX symbol clock + - description: UFS card first RX symbol clock + - description: UFS card second RX symbol clock + - description: UFS card first TX symbol clock + - description: Primary USB SuperSpeed pipe clock + - description: USB4 PHY pipegmux clock source + - description: USB4 PHY DP gmux clock source + - description: USB4 PHY sys pipegmux clock source + - description: USB4 PHY PCIe pipe clock + - description: USB4 PHY router max pipe clock + - description: Primary USB4 RX0 clock + - description: Primary USB4 RX1 clock + - description: Secondary USB SuperSpeed pipe clock + - description: Second USB4 PHY pipegmux clock source + - description: Second USB4 PHY DP gmux clock source + - description: Second USB4 PHY sys pipegmux clock source + - description: Second USB4 PHY PCIe pipe clock + - description: Second USB4 PHY router max pipe clock + - description: Secondary USB4 RX0 clock + - description: Secondary USB4 RX1 clock + - description: Multiport USB first SuperSpeed pipe clock + - description: Multiport USB second SuperSpeed pipe clock + - description: PCIe 2a pipe clock + - description: PCIe 2b pipe clock + - description: PCIe 3a pipe clock + - description: PCIe 3b pipe clock + - description: PCIe 4 pipe clock + - description: First EMAC controller reference clock + - description: Second EMAC controller reference clock + + protected-clocks: + maxItems: 389 + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&ufs_phy_rx_symbol_0_clk>, + <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <&ufs_card_rx_symbol_0_clk>, + <&ufs_card_rx_symbol_1_clk>, + <&ufs_card_tx_symbol_0_clk>, + <&usb_0_ssphy>, + <&gcc_usb4_phy_pipegmux_clk_src>, + <&gcc_usb4_phy_dp_gmux_clk_src>, + <&gcc_usb4_phy_sys_pipegmux_clk_src>, + <&usb4_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_gcc_usb4_rx0_clk>, + <&qusb4phy_gcc_usb4_rx1_clk>, + <&usb_1_ssphy>, + <&gcc_usb4_1_phy_pipegmux_clk_src>, + <&gcc_usb4_1_phy_dp_gmux_clk_src>, + <&gcc_usb4_1_phy_sys_pipegmux_clk_src>, + <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_1_gcc_usb4_rx0_clk>, + <&qusb4phy_1_gcc_usb4_rx1_clk>, + <&usb_2_ssphy>, + <&usb_3_ssphy>, + <&pcie2a_lane>, + <&pcie2b_lane>, + <&pcie3a_lane>, + <&pcie3b_lane>, + <&pcie4_lane>, + <&rxc0_ref_clk>, + <&rxc1_ref_clk>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml new file mode 100644 index 000000000..e169d46c7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDM845 + + See also: + - dt-bindings/clock/qcom,gcc-sdm845.h + +properties: + compatible: + enum: + - qcom,gcc-sdm670 + - qcom,gcc-sdm845 + + clocks: + minItems: 3 + maxItems: 5 + + clock-names: + minItems: 3 + maxItems: 5 + + power-domains: + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: qcom,gcc.yaml# + - if: + properties: + compatible: + contains: + const: qcom,gcc-sdm670 + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + + - if: + properties: + compatible: + contains: + const: qcom,gcc-sdm845 + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + - description: PCIE 0 Pipe clock source + - description: PCIE 1 Pipe clock source + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + - const: pcie_0_pipe_clk + - const: pcie_1_pipe_clk + +unevaluatedProperties: false + +examples: + # Example for GCC for SDM845: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_lane>, + <&pcie1_lane>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml new file mode 100644 index 000000000..13ffa16e0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SDX55 + +maintainers: + - Vinod Koul <vkoul@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDX55 + + See also: + - dt-bindings/clock/qcom,gcc-sdx55.h + +properties: + compatible: + const: qcom,gcc-sdx55 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PLL test clock source (Optional clock) + minItems: 2 + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: core_bi_pll_test_se # Optional clock + minItems: 2 + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, <&pll_test_clk>; + clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml new file mode 100644 index 000000000..8a1419c4d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SDX65 + +maintainers: + - Vamsi krishna Lanka <quic_vamslank@quicinc.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDX65 + + See also: + - dt-bindings/clock/qcom,gcc-sdx65.h + +properties: + compatible: + const: qcom,gcc-sdx65 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + - description: PCIE Pipe clock source + - description: USB3 phy wrapper pipe clock source + - description: PLL test clock source (Optional clock) + minItems: 5 + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + - const: pcie_pipe_clk + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk + - const: core_bi_pll_test_se # Optional clock + minItems: 5 + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdx65"; + reg = <0x100000 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, + <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>, <&pll_test_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", + "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk", "core_bi_pll_test_se"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml new file mode 100644 index 000000000..bb81a27a1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM6115 and SM4250 + +maintainers: + - Iskren Chernev <iskren.chernev@gmail.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM4250/6115. + + See also: + - dt-bindings/clock/qcom,gcc-sm6115.h + +properties: + compatible: + const: qcom,gcc-sm6115 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml new file mode 100644 index 000000000..03e84e158 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM6125 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM6125. + + See also: + - dt-bindings/clock/qcom,gcc-sm6125.h + +properties: + compatible: + const: qcom,gcc-sm6125 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@1400000 { + compatible = "qcom,gcc-sm6125"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml new file mode 100644 index 000000000..cbe98c01c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM6350 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM6350. + + See also: + - dt-bindings/clock/qcom,gcc-sm6350.h + +properties: + compatible: + const: qcom,gcc-sm6350 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm6350"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml new file mode 100644 index 000000000..0333ccb07 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8150 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8150. + + See also: + - dt-bindings/clock/qcom,gcc-sm8150.h + +properties: + compatible: + const: qcom,gcc-sm8150 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml new file mode 100644 index 000000000..4e2a9cac0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8250 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8250. + + See also: + - dt-bindings/clock/qcom,gcc-sm8250.h + +properties: + compatible: + const: qcom,gcc-sm8250 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8250"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml new file mode 100644 index 000000000..3edbeca70 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8350 + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8350. + + See also: + - dt-bindings/clock/qcom,gcc-sm8350.h + +properties: + compatible: + const: qcom,gcc-sm8350 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PLL test clock source (Optional clock) + - description: PCIE 0 Pipe clock source (Optional clock) + - description: PCIE 1 Pipe clock source (Optional clock) + - description: UFS card Rx symbol 0 clock source (Optional clock) + - description: UFS card Rx symbol 1 clock source (Optional clock) + - description: UFS card Tx symbol 0 clock source (Optional clock) + - description: UFS phy Rx symbol 0 clock source (Optional clock) + - description: UFS phy Rx symbol 1 clock source (Optional clock) + - description: UFS phy Tx symbol 0 clock source (Optional clock) + - description: USB3 phy wrapper pipe clock source (Optional clock) + - description: USB3 phy sec pipe clock source (Optional clock) + minItems: 2 + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: core_bi_pll_test_se # Optional clock + - const: pcie_0_pipe_clk # Optional clock + - const: pcie_1_pipe_clk # Optional clock + - const: ufs_card_rx_symbol_0_clk # Optional clock + - const: ufs_card_rx_symbol_1_clk # Optional clock + - const: ufs_card_tx_symbol_0_clk # Optional clock + - const: ufs_phy_rx_symbol_0_clk # Optional clock + - const: ufs_phy_rx_symbol_1_clk # Optional clock + - const: ufs_phy_tx_symbol_0_clk # Optional clock + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock + - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock + minItems: 2 + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8350"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml new file mode 100644 index 000000000..102ce6862 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8450 + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8450 + + See also: + - dt-bindings/clock/qcom,gcc-sm8450.h + +properties: + compatible: + const: qcom,gcc-sm8450 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIE 0 Pipe clock source (Optional clock) + - description: PCIE 1 Pipe clock source (Optional clock) + - description: PCIE 1 Phy Auxillary clock source (Optional clock) + - description: UFS Phy Rx symbol 0 clock source (Optional clock) + - description: UFS Phy Rx symbol 1 clock source (Optional clock) + - description: UFS Phy Tx symbol 0 clock source (Optional clock) + - description: USB3 Phy wrapper pipe clock source (Optional clock) + minItems: 2 + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: pcie_0_pipe_clk # Optional clock + - const: pcie_1_pipe_clk # Optional clock + - const: pcie_1_phy_aux_clk # Optional clock + - const: ufs_phy_rx_symbol_0_clk # Optional clock + - const: ufs_phy_rx_symbol_1_clk # Optional clock + - const: ufs_phy_tx_symbol_0_clk # Optional clock + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock + minItems: 2 + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x00100000 0x001f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml new file mode 100644 index 000000000..2ed27a2ef --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding Common Bindings + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Common bindings for Qualcomm global clock control module which supports + the clocks, resets and power domains. + +properties: + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml new file mode 100644 index 000000000..3f70eb59a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding for SDM630 and SDM660 + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on SDM630 and SDM660. + + See also dt-bindings/clock/qcom,gpucc-sdm660.h. + +properties: + compatible: + enum: + - qcom,gpucc-sdm630 + - qcom,gpucc-sdm660 + + clocks: + items: + - description: Board XO source + - description: GPLL0 main gpu branch + - description: GPLL0 divider gpu branch + + clock-names: + items: + - const: xo + - const: gcc_gpu_gpll0_clk + - const: gcc_gpu_gpll0_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm660.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + clock-controller@5065000 { + compatible = "qcom,gpucc-sdm660"; + reg = <0x05065000 0x9038>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK>, + <&gcc GCC_GPU_GPLL0_DIV_CLK>; + clock-names = "xo", "gcc_gpu_gpll0_clk", + "gcc_gpu_gpll0_div_clk"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml new file mode 100644 index 000000000..0a0546c07 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on Qualcomm SoCs. + + See also: + dt-bindings/clock/qcom,gpucc-sm8350.h + +properties: + compatible: + enum: + - qcom,sm8350-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@3d90000 { + compatible = "qcom,sm8350-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml new file mode 100644 index 000000000..a7d0af1bd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on Qualcomm SoCs. + + See also: + dt-bindings/clock/qcom,gpucc-sdm845.h + dt-bindings/clock/qcom,gpucc-sc7180.h + dt-bindings/clock/qcom,gpucc-sc7280.h + dt-bindings/clock/qcom,gpucc-sc8280xp.h + dt-bindings/clock/qcom,gpucc-sm6350.h + dt-bindings/clock/qcom,gpucc-sm8150.h + dt-bindings/clock/qcom,gpucc-sm8250.h + +properties: + compatible: + enum: + - qcom,sdm845-gpucc + - qcom,sc7180-gpucc + - qcom,sc7280-gpucc + - qcom,sc8180x-gpucc + - qcom,sc8280xp-gpucc + - qcom,sm6350-gpucc + - qcom,sm8150-gpucc + - qcom,sm8250-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + clock-names: + items: + - const: bi_tcxo + - const: gcc_gpu_gpll0_clk_src + - const: gcc_gpu_gpll0_div_clk_src + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0x05090000 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt new file mode 100644 index 000000000..ec02a0244 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt @@ -0,0 +1,60 @@ +High-Frequency PLL (HFPLL) + +PROPERTIES + +- compatible: + Usage: required + Value type: <string>: + shall contain only one of the following. The generic + compatible "qcom,hfpll" should be also included. + + "qcom,hfpll-ipq8064", "qcom,hfpll" + "qcom,hfpll-apq8064", "qcom,hfpll" + "qcom,hfpll-msm8974", "qcom,hfpll" + "qcom,hfpll-msm8960", "qcom,hfpll" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: address and size of HPLL registers. An optional second + element specifies the address and size of the alias + register region. + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the xo clock. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "xo". + +- clock-output-names: + Usage: required + Value type: <string> + Definition: Name of the PLL. Typically hfpllX where X is a CPU number + starting at 0. Otherwise hfpll_Y where Y is more specific + such as "l2". + +Example: + +1) An HFPLL for the L2 cache. + + clock-controller@f9016000 { + compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; + reg = <0xf9016000 0x30>; + clocks = <&xo_board>; + clock-names = "xo"; + clock-output-names = "hfpll_l2"; + }; + +2) An HFPLL for CPU0. This HFPLL has the alias register region. + + clock-controller@f908a000 { + compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; + reg = <0xf908a000 0x30>, <0xf900a000 0x30>; + clocks = <&xo_board>; + clock-names = "xo"; + clock-output-names = "hfpll0"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt new file mode 100644 index 000000000..030ba60da --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt @@ -0,0 +1,34 @@ +Krait Clock Controller + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,krait-cc-v1" + "qcom,krait-cc-v2" + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: must be 1 + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the clock parents of hfpll, secondary muxes. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb". + +Example: + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>; + clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt new file mode 100644 index 000000000..a3c78aa88 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,lcc.txt @@ -0,0 +1,22 @@ +Qualcomm LPASS Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,lcc-msm8960" + "qcom,lcc-apq8064" + "qcom,lcc-ipq8064" + "qcom,lcc-mdm9615" + +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 +- #reset-cells : shall contain 1 + +Example: + clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt new file mode 100644 index 000000000..b9e978704 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt @@ -0,0 +1,26 @@ +Qualcomm LPASS Clock Controller Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-lpasscc" +- #clock-cells : from common clock binding, shall contain 1. +- reg : shall contain base register address and size, + in the order + Index-0 maps to LPASS_CC register region + Index-1 maps to LPASS_QDSP6SS register region + +Optional properties : +- reg-names : register names of LPASS domain + "cc", "qdsp6ss". + +Example: + +The below node has to be defined in the cases where the LPASS peripheral loader +would bring the subsystem out of reset. + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0x17014000 0x1f004>, <0x17300000 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml new file mode 100644 index 000000000..03faab5b6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Multimedia Clock & Reset Controller Binding + +maintainers: + - Jeffrey Hugo <quic_jhugo@quicinc.com> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm multimedia clock control module which supports the clocks, resets and + power domains. + +properties: + compatible: + enum: + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8226 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8992 + - qcom,mmcc-msm8994 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 + - qcom,mmcc-sdm630 + - qcom,mmcc-sdm660 + + clocks: + minItems: 8 + maxItems: 10 + + clock-names: + minItems: 8 + maxItems: 10 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding + + vdd-gfx-supply: + description: + Regulator supply for the GPU_GX GDSC + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,mmcc-apq8064 + - qcom,mmcc-msm8960 + then: + properties: + clocks: + items: + - description: Board PXO source + - description: PLL 3 clock + - description: PLL 3 Vote clock + - description: DSI phy instance 1 dsi clock + - description: DSI phy instance 1 byte clock + - description: DSI phy instance 2 dsi clock + - description: DSI phy instance 2 byte clock + - description: HDMI phy PLL clock + + clock-names: + items: + - const: pxo + - const: pll3 + - const: pll8_vote + - const: dsi1pll + - const: dsi1pllbyte + - const: dsi2pll + - const: dsi2pllbyte + - const: hdmipll + + - if: + properties: + compatible: + contains: + enum: + - qcom,mmcc-msm8994 + - qcom,mmcc-msm8998 + - qcom,mmcc-sdm630 + - qcom,mmcc-sdm660 + then: + required: + - clocks + - clock-names + + - if: + properties: + compatible: + contains: + const: qcom,mmcc-msm8994 + then: + properties: + clocks: + items: + - description: Board XO source + - description: Global PLL 0 clock + - description: MMSS NoC AHB clock + - description: GFX3D clock + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + - description: DSI phy instance 1 dsi clock + - description: DSI phy instance 1 byte clock + - description: HDMI phy PLL clock + + clock-names: + items: + - const: xo + - const: gpll0 + - const: mmssnoc_ahb + - const: oxili_gfx3d_clk_src + - const: dsi0pll + - const: dsi0pllbyte + - const: dsi1pll + - const: dsi1pllbyte + - const: hdmipll + + - if: + properties: + compatible: + contains: + const: qcom,mmcc-msm8996 + then: + properties: + clocks: + items: + - description: Board XO source + - description: Global PLL 0 clock + - description: MMSS NoC AHB clock + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + - description: DSI phy instance 1 dsi clock + - description: DSI phy instance 1 byte clock + - description: HDMI phy PLL clock + + clock-names: + items: + - const: xo + - const: gpll0 + - const: gcc_mmss_noc_cfg_ahb_clk + - const: dsi0pll + - const: dsi0pllbyte + - const: dsi1pll + - const: dsi1pllbyte + - const: hdmipll + + - if: + properties: + compatible: + contains: + const: qcom,mmcc-msm8998 + then: + properties: + clocks: + items: + - description: Board XO source + - description: Global PLL 0 clock + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + - description: DSI phy instance 1 dsi clock + - description: DSI phy instance 1 byte clock + - description: HDMI phy PLL clock + - description: DisplayPort phy PLL link clock + - description: DisplayPort phy PLL vco clock + - description: Test clock + + clock-names: + items: + - const: xo + - const: gpll0 + - const: dsi0dsi + - const: dsi0byte + - const: dsi1dsi + - const: dsi1byte + - const: hdmipll + - const: dplink + - const: dpvco + - const: core_bi_pll_test_se + + - if: + properties: + compatible: + contains: + enum: + - qcom,mmcc-sdm630 + - qcom,mmcc-sdm660 + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board sleep source + - description: Global PLL 0 clock + - description: Global PLL 0 DIV clock + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + - description: DSI phy instance 1 dsi clock + - description: DSI phy instance 1 byte clock + - description: DisplayPort phy PLL link clock + - description: DisplayPort phy PLL vco clock + + clock-names: + items: + - const: xo + - const: sleep_clk + - const: gpll0 + - const: gpll0_div + - const: dsi0pll + - const: dsi0pllbyte + - const: dsi1pll + - const: dsi1pllbyte + - const: dp_link_2x_clk_divsel_five + - const: dp_vco_divided_clk_src_mux + +examples: + # Example for MMCC for MSM8960: + - | + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml new file mode 100644 index 000000000..c4971234f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm clock controller for MSM8996 CPUs + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +description: | + Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster + and clock 1 is for Perf cluster. + +properties: + compatible: + enum: + - qcom,msm8996-apcc + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: XO source + + clock-names: + items: + - const: xo + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + kryocc: clock-controller@6400000 { + compatible = "qcom,msm8996-apcc"; + reg = <0x6400000 0x90000>; + #clock-cells = <1>; + + clocks = <&xo_board>; + clock-names = "xo"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml new file mode 100644 index 000000000..d747bb58f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on MSM8998. + + See also dt-bindings/clock/qcom,gpucc-msm8998.h. + +properties: + compatible: + const: qcom,msm8998-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source (gcc_gpu_gpll0_clk_src) + + clock-names: + items: + - const: xo + - const: gpll0 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@5065000 { + compatible = "qcom,msm8998-gpucc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0_OUT_MAIN>; + clock-names = "xo", "gpll0"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml new file mode 100644 index 000000000..bbaaf1e2a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,q6sstopcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Q6SSTOP clock Controller + +maintainers: + - Govind Singh <govinds@codeaurora.org> + +properties: + compatible: + const: "qcom,qcs404-q6sstopcc" + + reg: + items: + - description: Q6SSTOP clocks register region + - description: Q6SSTOP_TCSR register region + + clocks: + items: + - description: ahb clock for the q6sstopCC + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + q6sstopcc: clock-controller@7500000 { + compatible = "qcom,qcs404-q6sstopcc"; + reg = <0x07500000 0x4e000>, <0x07550000 0x10000>; + clocks = <&gcc 141>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml new file mode 100644 index 000000000..973e408c6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for qcm2290 + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on qcm2290. + + See also dt-bindings/clock/qcom,dispcc-qcm2290.h. + +properties: + compatible: + const: qcom,qcm2290-dispcc + + clocks: + items: + - description: Board XO source + - description: Board active-only XO source + - description: GPLL0 source from GCC + - description: GPLL0 div source from GCC + - description: Byte clock from DSI PHY + - description: Pixel clock from DSI PHY + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: gcc_disp_gpll0_clk_src + - const: gcc_disp_gpll0_div_clk_src + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@5f00000 { + compatible = "qcom,qcm2290-dispcc"; + reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&dsi0_phy 0>, + <&dsi0_phy 1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml new file mode 100644 index 000000000..2a95bf866 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM Clock Controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and + come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is + an "active" clock, which means that the consumer only care that the clock is + available when the apps CPU subsystem is active, i.e. not suspended or in + deep idle. If it is important that the clock keeps running during system + suspend, you need to specify the non-active clock, the one not containing + *_A_* in the enumerator name. + +properties: + compatible: + items: + - enum: + - qcom,rpmcc-apq8060 + - qcom,rpmcc-apq8064 + - qcom,rpmcc-ipq806x + - qcom,rpmcc-mdm9607 + - qcom,rpmcc-msm8226 + - qcom,rpmcc-msm8660 + - qcom,rpmcc-msm8909 + - qcom,rpmcc-msm8916 + - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8953 + - qcom,rpmcc-msm8974 + - qcom,rpmcc-msm8976 + - qcom,rpmcc-msm8992 + - qcom,rpmcc-msm8994 + - qcom,rpmcc-msm8996 + - qcom,rpmcc-msm8998 + - qcom,rpmcc-qcm2290 + - qcom,rpmcc-qcs404 + - qcom,rpmcc-sdm660 + - qcom,rpmcc-sm6115 + - qcom,rpmcc-sm6125 + - qcom,rpmcc-sm6375 + - const: qcom,rpmcc + + '#clock-cells': + const: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,rpmcc-apq8060 + - qcom,rpmcc-ipq806x + - qcom,rpmcc-msm8660 + + then: + properties: + clocks: + items: + - description: pxo clock + + clock-names: + items: + - const: pxo + + - if: + properties: + compatible: + contains: + const: qcom,rpmcc-apq8064 + then: + properties: + clocks: + items: + - description: pxo clock + - description: cxo clock + + clock-names: + items: + - const: pxo + - const: cxo + + - if: + properties: + compatible: + contains: + enum: + - qcom,rpmcc-mdm9607 + - qcom,rpmcc-msm8226 + - qcom,rpmcc-msm8916 + - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8953 + - qcom,rpmcc-msm8974 + - qcom,rpmcc-msm8976 + - qcom,rpmcc-msm8992 + - qcom,rpmcc-msm8994 + - qcom,rpmcc-msm8996 + - qcom,rpmcc-msm8998 + - qcom,rpmcc-qcm2290 + - qcom,rpmcc-qcs404 + - qcom,rpmcc-sdm660 + - qcom,rpmcc-sm6115 + - qcom,rpmcc-sm6125 + + then: + properties: + clocks: + items: + - description: xo clock + + clock-names: + items: + - const: xo + +additionalProperties: false + +examples: + - | + rpm { + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; + + - | + rpm { + clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml new file mode 100644 index 000000000..437a34b93 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. RPMh Clocks Bindings + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Resource Power Manager Hardened (RPMh) manages shared resources on + some Qualcomm Technologies Inc. SoCs. It accepts clock requests from + other hardware subsystems via RSC to control clocks. + +properties: + compatible: + enum: + - qcom,sc7180-rpmh-clk + - qcom,sc7280-rpmh-clk + - qcom,sc8180x-rpmh-clk + - qcom,sc8280xp-rpmh-clk + - qcom,sdm670-rpmh-clk + - qcom,sdm845-rpmh-clk + - qcom,sdx55-rpmh-clk + - qcom,sdx65-rpmh-clk + - qcom,sm6350-rpmh-clk + - qcom,sm8150-rpmh-clk + - qcom,sm8250-rpmh-clk + - qcom,sm8350-rpmh-clk + - qcom,sm8450-rpmh-clk + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xo + + '#clock-cells': + const: 1 + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + # Example for GCC for SDM845: The below node should be defined inside + # &apps_rsc node. + - | + #include <dt-bindings/clock/qcom,rpmh.h> + rpmhcc: clock-controller { + compatible = "qcom,sdm845-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml new file mode 100644 index 000000000..f49027edf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,camcc-sc7180.h + +properties: + compatible: + const: qcom,sc7180-camcc + + clocks: + items: + - description: Board XO source + - description: Camera_ahb clock from GCC + - description: Camera XO clock from GCC + + clock-names: + items: + - const: bi_tcxo + - const: iface + - const: xo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml new file mode 100644 index 000000000..e94847f92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SC7180. + + See also dt-bindings/clock/qcom,dispcc-sc7180.h. + +properties: + compatible: + const: qcom,sc7180-dispcc + + clocks: + items: + - description: Board XO source + - description: GPLL0 source from GCC + - description: Byte clock from DSI PHY + - description: Pixel clock from DSI PHY + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: gcc_disp_gpll0_clk_src + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sc7180-dispcc"; + reg = <0x0af00000 0x200000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&dsi_phy 0>, + <&dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml new file mode 100644 index 000000000..c54172fbf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core Clock Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core clock control module which supports the clocks and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7180.h + +properties: + compatible: + enum: + - qcom,sc7180-lpasshm + - qcom,sc7180-lpasscorecc + + clocks: + items: + - description: gcc_lpass_sway clock from GCC + - description: Board XO source + + clock-names: + items: + - const: iface + - const: bi_tcxo + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + minItems: 1 + items: + - description: lpass core cc register + - description: lpass audio cc register + + reg-names: + items: + - const: lpass_core_cc + - const: lpass_audio_cc + +if: + properties: + compatible: + contains: + const: qcom,sc7180-lpasshm +then: + properties: + reg: + maxItems: 1 + +else: + properties: + reg: + minItems: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> + clock-controller@63000000 { + compatible = "qcom,sc7180-lpasshm"; + reg = <0x63000000 0x28>; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> + clock-controller@62d00000 { + compatible = "qcom,sc7180-lpasscorecc"; + reg = <0x62d00000 0x50000>, <0x62780000 0x30000>; + reg-names = "lpass_core_cc", "lpass_audio_cc"; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml new file mode 100644 index 000000000..970030986 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Modem Clock Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm modem clock control module which supports the clocks on SC7180. + + See also: + - dt-bindings/clock/qcom,mss-sc7180.h + +properties: + compatible: + const: qcom,sc7180-mss + + clocks: + items: + - description: gcc_mss_mfab_axi clock from GCC + - description: gcc_mss_nav_axi clock from GCC + - description: gcc_mss_cfg_ahb clock from GCC + + clock-names: + items: + - const: gcc_mss_mfab_axis + - const: gcc_mss_nav_axi + - const: cfg_ahb + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + clock-controller@41a8000 { + compatible = "qcom,sc7180-mss"; + reg = <0x041a8000 0x8000>; + clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>; + clock-names = "gcc_mss_mfab_axis", + "gcc_mss_nav_axi", + "cfg_ahb"; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml new file mode 100644 index 000000000..f27ca6f03 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SC7280. + + See also dt-bindings/clock/qcom,camcc-sc7280.h + +properties: + compatible: + const: qcom,sc7280-camcc + + clocks: + items: + - description: Board XO source + - description: Board XO active source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sc7280-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml new file mode 100644 index 000000000..2178666fb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SC7280. + + See also dt-bindings/clock/qcom,dispcc-sc7280.h. + +properties: + compatible: + const: qcom,sc7280-dispcc + + clocks: + items: + - description: Board XO source + - description: GPLL0 source from GCC + - description: Byte clock from DSI PHY + - description: Pixel clock from DSI PHY + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + - description: Link clock from EDP PHY + - description: VCO DIV clock from EDP PHY + + clock-names: + items: + - const: bi_tcxo + - const: gcc_disp_gpll0_clk + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + - const: edp_phy_pll_link_clk + - const: edp_phy_pll_vco_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sc7280-dispcc"; + reg = <0x0af00000 0x200000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&dsi_phy 0>, + <&dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>, + <&edp_phy 0>, + <&edp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml new file mode 100644 index 000000000..633887dc2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core Clock Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core clock control module which supports the clocks and + power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,lpass-sc7280.h + +properties: + compatible: + enum: + - qcom,sc7280-lpasscc + + clocks: + items: + - description: gcc_cfg_noc_lpass_clk from GCC + + clock-names: + items: + - const: iface + + '#clock-cells': + const: 1 + + reg: + items: + - description: LPASS qdsp6ss register + - description: LPASS top-cc register + + reg-names: + items: + - const: qdsp6ss + - const: top_cc + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpass-sc7280.h> + clock-controller@3000000 { + compatible = "qcom,sc7280-lpasscc"; + reg = <0x03000000 0x40>, <0x03c04000 0x4>; + reg-names = "qdsp6ss", "top_cc"; + clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; + clock-names = "iface"; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml new file mode 100644 index 000000000..f50e284e5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core and audio clock control module which supports the + clocks and power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7280.h + - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h + +properties: + clocks: true + + clock-names: true + + reg: true + + compatible: + enum: + - qcom,sc7280-lpassaoncc + - qcom,sc7280-lpassaudiocc + - qcom,sc7280-lpasscorecc + - qcom,sc7280-lpasshm + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + '#reset-cells': + const: 1 + + qcom,adsp-pil-mode: + description: + Indicates if the LPASS would be brought out of reset using + peripheral loader. + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpassaudiocc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: lpass_aon_cc_main_rcg_clk_src + + reg: + items: + - description: lpass core cc register + - description: lpass audio csr register + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpassaoncc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board XO active only source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: iface + + reg: + maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpasshm + - qcom,sc7280-lpasscorecc + + then: + properties: + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + + reg: + maxItems: 1 +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0x3300000 0x30000>, + <0x32a9000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0x3c00000 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0x3900000 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0x3380000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao","iface"; + qcom,adsp-pil-mode; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml new file mode 100644 index 000000000..d4239ccae --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SDM845 + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SDM845. + + See also dt-bindings/clock/qcom,camcc-sm845.h + +properties: + compatible: + const: qcom,sdm845-camcc + + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sdm845-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml new file mode 100644 index 000000000..4a3be733d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SDM845 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SDM845. + + See also dt-bindings/clock/qcom,dispcc-sdm845.h. + +properties: + compatible: + const: qcom,sdm845-dispcc + + # NOTE: sdm845.dtsi existed for quite some time and specified no clocks. + # The code had to use hardcoded mechanisms to find the input clocks. + # New dts files should have these clocks. + clocks: + items: + - description: Board XO source + - description: GPLL0 source from GCC + - description: GPLL0 div source from GCC + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: gcc_disp_gpll0_clk_src + - const: gcc_disp_gpll0_div_clk_src + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dsi1_phy_pll_out_byteclk + - const: dsi1_phy_pll_out_dsiclk + - const: dp_link_clk_divsel_ten + - const: dp_vco_divided_clk_src_mux + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0x0af00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml new file mode 100644 index 000000000..6660ff16a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock Controller for SM6115 + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: | + Qualcomm display clock control module which supports the clocks and + power domains on SM6115. + + See also: + include/dt-bindings/clock/qcom,sm6115-dispcc.h + +properties: + compatible: + enum: + - qcom,sm6115-dispcc + + clocks: + items: + - description: Board XO source + - description: Board sleep clock + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: GPLL0 DISP DIV clock from GCC + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + clock-controller@5f00000 { + compatible = "qcom,sm6115-dispcc"; + reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml new file mode 100644 index 000000000..3c573e1a1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM6375 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM6375 + + See also: + - dt-bindings/clock/qcom,sm6375-gcc.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + const: qcom,sm6375-gcc + + clocks: + items: + - description: Board XO source + - description: Board XO Active-Only source + - description: Sleep clock source + +required: + - compatible + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@1400000 { + compatible = "qcom,sm6375-gcc"; + reg = <0x01400000 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&sleep_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml new file mode 100644 index 000000000..268f4c6ae --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SM8450 + +maintainers: + - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SM8450. + + See also include/dt-bindings/clock/qcom,sm8450-camcc.h + +properties: + compatible: + const: qcom,sm8450-camcc + + clocks: + items: + - description: Camera AHB clock from GCC + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + power-domains: + maxItems: 1 + description: + A phandle and PM domain specifier for the MMCX power domain. + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - required-opps + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0xade0000 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml new file mode 100644 index 000000000..1cc2457f8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller for SM8450 + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SM8450. + + See also: + include/dt-bindings/clock/qcom,sm8450-dispcc.h + +properties: + compatible: + enum: + - qcom,sm8450-dispcc + + clocks: + minItems: 3 + items: + - description: Board XO source + - description: Board Always On XO source + - description: Display's AHB clock + - description: sleep clock + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY0 + - description: VCO DIV clock from DP PHY0 + - description: Link clock from DP PHY1 + - description: VCO DIV clock from DP PHY1 + - description: Link clock from DP PHY2 + - description: VCO DIV clock from DP PHY2 + - description: Link clock from DP PHY3 + - description: VCO DIV clock from DP PHY3 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + power-domains: + description: + A phandle and PM domain specifier for the MMCX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@af00000 { + compatible = "qcom,sm8450-dispcc"; + reg = <0x0af00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt new file mode 100644 index 000000000..7474aba36 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt @@ -0,0 +1,59 @@ +Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv) + +clkdiv configures the clock frequency of a set of outputs on the PMIC. +These clocks are typically wired through alternate functions on +gpio pins. + +======================= +Properties +======================= + +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,spmi-clkdiv". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: base address of CLKDIV peripherals. + +- qcom,num-clkdivs + Usage: required + Value type: <u32> + Definition: number of CLKDIV peripherals. + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the xo clock. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "xo". + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: shall contain 1. + +======= +Example +======= + +pm8998_clk_divs: clock-controller@5b00 { + compatible = "qcom,spmi-clkdiv"; + reg = <0x5b00>; + #clock-cells = <1>; + qcom,num-clkdivs = <3>; + clocks = <&xo_board>; + clock-names = "xo"; + + assigned-clocks = <&pm8998_clk_divs 1>, + <&pm8998_clk_divs 2>, + <&pm8998_clk_divs 3>; + assigned-clock-rates = <9600000>, + <9600000>, + <9600000>; +}; diff --git a/Documentation/devicetree/bindings/clock/qcom,turingcc.txt b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt new file mode 100644 index 000000000..126517de5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt @@ -0,0 +1,19 @@ +Qualcomm Turing Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible: shall contain "qcom,qcs404-turingcc". +- reg: shall contain base register location and length. +- clocks: ahb clock for the TuringCC +- #clock-cells: from common clock binding, shall contain 1. +- #reset-cells: from common reset binding, shall contain 1. + +Example: + turingcc: clock-controller@800000 { + compatible = "qcom,qcs404-turingcc"; + reg = <0x00800000 0x30000>; + clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml new file mode 100644 index 000000000..3cdbcebdc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Video Clock & Reset Controller Binding + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm video clock control module which supports the clocks, resets and + power domains on Qualcomm SoCs. + + See also: + dt-bindings/clock/qcom,videocc-sc7180.h + dt-bindings/clock/qcom,videocc-sc7280.h + dt-bindings/clock/qcom,videocc-sdm845.h + dt-bindings/clock/qcom,videocc-sm8150.h + dt-bindings/clock/qcom,videocc-sm8250.h + +properties: + compatible: + enum: + - qcom,sc7180-videocc + - qcom,sc7280-videocc + - qcom,sdm845-videocc + - qcom,sm8150-videocc + - qcom,sm8250-videocc + + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + power-domains: + description: + A phandle and PM domain specifier for the MMCX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@ab00000 { + compatible = "qcom,sdm845-videocc"; + reg = <0x0ab00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt new file mode 100644 index 000000000..10119d9ef --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -0,0 +1,212 @@ +* Clock Block on Freescale QorIQ Platforms + +Freescale QorIQ chips take primary clocking input from the external +SYSCLK signal. The SYSCLK input (frequency) is multiplied using +multiple phase locked loops (PLL) to create a variety of frequencies +which can then be passed to a variety of internal logic, including +cores and peripheral IP blocks. +Please refer to the Reference Manual for details. + +All references to "1.0" and "2.0" refer to the QorIQ chassis version to +which the chip complies. + +Chassis Version Example Chips +--------------- ------------- +1.0 p4080, p5020, p5040 +2.0 t4240, b4860 + +1. Clock Block Binding + +Required properties: +- compatible: Should contain a chip-specific clock block compatible + string and (if applicable) may contain a chassis-version clock + compatible string. + + Chip-specific strings are of the form "fsl,<chip>-clockgen", such as: + * "fsl,p2041-clockgen" + * "fsl,p3041-clockgen" + * "fsl,p4080-clockgen" + * "fsl,p5020-clockgen" + * "fsl,p5040-clockgen" + * "fsl,t1023-clockgen" + * "fsl,t1024-clockgen" + * "fsl,t1040-clockgen" + * "fsl,t1042-clockgen" + * "fsl,t2080-clockgen" + * "fsl,t2081-clockgen" + * "fsl,t4240-clockgen" + * "fsl,b4420-clockgen" + * "fsl,b4860-clockgen" + * "fsl,ls1012a-clockgen" + * "fsl,ls1021a-clockgen" + * "fsl,ls1028a-clockgen" + * "fsl,ls1043a-clockgen" + * "fsl,ls1046a-clockgen" + * "fsl,ls1088a-clockgen" + * "fsl,ls2080a-clockgen" + * "fsl,lx2160a-clockgen" + Chassis-version clock strings include: + * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks + * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks +- reg: Describes the address of the device's resources within the + address space defined by its parent bus, and resource zero + represents the clock register set + +Optional properties: +- ranges: Allows valid translation between child's address space and + parent's. Must be present if the device has sub-nodes. +- #address-cells: Specifies the number of cells used to represent + physical base addresses. Must be present if the device has + sub-nodes and set to 1 if present +- #size-cells: Specifies the number of cells used to represent + the size of an address. Must be present if the device has + sub-nodes and set to 1 if present +- clock-frequency: Input system clock frequency (SYSCLK) +- clocks: If clock-frequency is not specified, sysclk may be provided + as an input clock. Either clock-frequency or clocks must be + provided. + A second input clock, called "coreclk", may be provided if + core PLLs are based on a different input clock from the + platform PLL. +- clock-names: Required if a coreclk is present. Valid names are + "sysclk" and "coreclk". + +2. Clock Provider + +The clockgen node should act as a clock provider, though in older device +trees the children of the clockgen node are the clock providers. + +When the clockgen node is a clock provider, #clock-cells = <2>. +The first cell of the clock specifier is the clock type, and the +second cell is the clock index for the specified type. + + Type# Name Index Cell + 0 sysclk must be 0 + 1 cmux index (n in CLKCnCSR) + 2 hwaccel index (n in CLKCGnHWACSR) + 3 fman 0 for fm1, 1 for fm2 + 4 platform pll n=pll/(n+1). For example, when n=1, + that means output_freq=PLL_freq/2. + 5 coreclk must be 0 + +3. Example + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + clock-frequency = <133333333>; + reg = <0xe1000 0x1000>; + #clock-cells = <2>; + }; + + fman@400000 { + ... + clocks = <&clockgen 3 0>; + ... + }; +} +4. Legacy Child Nodes + +NOTE: These nodes are deprecated. Kernels should continue to support +device trees with these nodes, but new device trees should not use them. + +Most of the bindings are from the common clock binding[1]. + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : Should include one of the following: + * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0) + * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0) + * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0) + * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0) + * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0). + It takes parent's clock-frequency as its clock. + * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0). + It takes parent's clock-frequency as its clock. + * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0) + * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0) +- #clock-cells: From common clock binding. The number of cells in a + clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0" + clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks. + For "fsl,qoriq-core-pll-[1,2].0" clocks, the single + clock-specifier cell may take the following values: + * 0 - equal to the PLL frequency + * 1 - equal to the PLL frequency divided by 2 + * 2 - equal to the PLL frequency divided by 4 + +Recommended properties: +- clocks: Should be the phandle of input parent clock +- clock-names: From common clock binding, indicates the clock name +- clock-output-names: From common clock binding, indicates the names of + output clocks +- reg: Should be the offset and length of clock block base address. + The length should be 4. + +Legacy Example: +/ { + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + ranges = <0x0 0xe1000 0x1000>; + clock-frequency = <133333333>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0"; + clock-output-names = "sysclk"; + }; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux1"; + }; + + platform-pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; + }; +}; + +Example for legacy clock consumer: + +/ { + cpu0: PowerPC,e5500@0 { + ... + clocks = <&mux0>; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml new file mode 100644 index 000000000..102eb95cb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,9series.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Renesas 9-series I2C PCIe clock generators + +description: | + The Renesas 9-series are I2C PCIe clock generators providing + from 1 to 20 output clocks. + + When referencing the provided clock in the DT using phandle + and clock specifier, the following mapping applies: + + - 9FGV0241: + 0 -- DIF0 + 1 -- DIF1 + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + compatible: + enum: + - renesas,9fgv0241 + + reg: + description: I2C device address + enum: [ 0x68, 0x6a ] + + '#clock-cells': + const: 1 + + clocks: + items: + - description: XTal input clock + + renesas,out-amplitude-microvolt: + enum: [ 600000, 700000, 800000, 900000 ] + description: Output clock signal amplitude + + renesas,out-spread-spectrum: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 100000, 99750, 99500 ] + description: Output clock down spread in pcm (1/1000 of percent) + +patternProperties: + "^DIF[0-19]$": + type: object + description: + Description of one of the outputs (DIF0..DIF19). + + properties: + renesas,slew-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 2000000, 3000000 ] + description: Output clock slew rate select in V/ns + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + /* 25MHz reference crystal */ + ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + rs9: clock-generator@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + #clock-cells = <1>; + + clocks = <&ref25m>; + + DIF0 { + renesas,slew-rate = <3000000>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml new file mode 100644 index 000000000..9185d1017 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml @@ -0,0 +1,241 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Clock Pulse Generator (CPG) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Clock Pulse Generator (CPG) generates core clocks for the SoC. It + includes PLLs, and fixed and variable ratio dividers. + + The CPG may also provide a Clock Domain for SoC devices, in combination with + the CPG Module Stop (MSTP) Clocks. + +properties: + compatible: + oneOf: + - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6 + - const: renesas,r8a7740-cpg-clocks # R-Mobile A1 + - const: renesas,r8a7778-cpg-clocks # R-Car M1 + - const: renesas,r8a7779-cpg-clocks # R-Car H1 + - items: + - enum: + - renesas,r7s72100-cpg-clocks # RZ/A1H + - const: renesas,rz-cpg-clocks # RZ/A1 + - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5 + + reg: + maxItems: 1 + + clocks: true + + '#clock-cells': + const: 1 + + clock-output-names: true + + renesas,mode: + description: Board-specific settings of the MD_CK* bits on R-Mobile A1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + '#power-domain-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - clock-output-names + +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r8a73a4-cpg-clocks + then: + properties: + clocks: + items: + - description: extal1 + - description: extal2 + + clock-output-names: + items: + - const: main + - const: pll0 + - const: pll1 + - const: pll2 + - const: pll2s + - const: pll2h + - const: z + - const: z2 + - const: i + - const: m3 + - const: b + - const: m1 + - const: m2 + - const: zx + - const: zs + - const: hp + + - if: + properties: + compatible: + contains: + const: renesas,r8a7740-cpg-clocks + then: + properties: + clocks: + items: + - description: extal1 + - description: extal2 + - description: extalr + + clock-output-names: + items: + - const: system + - const: pllc0 + - const: pllc1 + - const: pllc2 + - const: r + - const: usb24s + - const: i + - const: zg + - const: b + - const: m1 + - const: hp + - const: hpp + - const: usbp + - const: s + - const: zb + - const: m3 + - const: cp + + required: + - renesas,mode + + - if: + properties: + compatible: + contains: + const: renesas,r8a7778-cpg-clocks + then: + properties: + clocks: + maxItems: 1 + + clock-output-names: + items: + - const: plla + - const: pllb + - const: b + - const: out + - const: p + - const: s + - const: s1 + + - if: + properties: + compatible: + contains: + const: renesas,r8a7779-cpg-clocks + then: + properties: + clocks: + maxItems: 1 + + clock-output-names: + items: + - const: plla + - const: z + - const: zs + - const: s + - const: s1 + - const: p + - const: b + - const: out + + - if: + properties: + compatible: + contains: + const: renesas,r7s72100-cpg-clocks + then: + properties: + clocks: + items: + - description: extal1 + - description: usb_x1 + + clock-output-names: + items: + - const: pll + - const: i + - const: g + + - if: + properties: + compatible: + contains: + const: renesas,sh73a0-cpg-clocks + then: + properties: + clocks: + items: + - description: extal1 + - description: extal2 + + clock-output-names: + items: + - const: main + - const: pll0 + - const: pll1 + - const: pll2 + - const: pll3 + - const: dsi0phy + - const: dsi1phy + - const: zg + - const: m3 + - const: b + - const: m1 + - const: m2 + - const: z + - const: zx + - const: hp + + - if: + properties: + compatible: + contains: + enum: + - renesas,r8a7778-cpg-clocks + - renesas,r8a7779-cpg-clocks + - renesas,rz-cpg-clocks + then: + required: + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7740-clock.h> + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7740-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>; + #clock-cells = <1>; + clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r", + "usb24s", "i", "zg", "b", "m1", "hp", "hpp", + "usbp", "s", "zb", "m3", "cp"; + renesas,mode = <0x05>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml new file mode 100644 index 000000000..2197c952e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas CPG DIV6 Clock + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse + Generator (CPG). Their clock input is divided by a configurable factor from 1 + to 64. + +properties: + compatible: + items: + - enum: + - renesas,r8a73a4-div6-clock # R-Mobile APE6 + - renesas,r8a7740-div6-clock # R-Mobile A1 + - renesas,sh73a0-div6-clock # SH-Mobile AG5 + - const: renesas,cpg-div6-clock + + reg: + maxItems: 1 + + clocks: + oneOf: + - maxItems: 1 + - maxItems: 4 + - maxItems: 8 + description: + For clocks with multiple parents, invalid settings must be specified as + "<0>". + + '#clock-cells': + const: 0 + + clock-output-names: true + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a73a4-clock.h> + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a73a4-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll2", + "pll2s", "pll2h", "z", "z2", + "i", "m3", "b", "m1", "m2", + "zx", "zs", "hp"; + }; + + sdhi2_clk: sdhi2_clk@e615007c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615007c 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, + <&extal2_clk>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml new file mode 100644 index 000000000..e57bc40d3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Clock Pulse Generator / Module Standby and Software Reset + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) + and MSSR (Module Standby and Software Reset) blocks are intimately connected, + and share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The MSSR block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + enum: + - renesas,r7s9210-cpg-mssr # RZ/A2 + - renesas,r8a7742-cpg-mssr # RZ/G1H + - renesas,r8a7743-cpg-mssr # RZ/G1M + - renesas,r8a7744-cpg-mssr # RZ/G1N + - renesas,r8a7745-cpg-mssr # RZ/G1E + - renesas,r8a77470-cpg-mssr # RZ/G1C + - renesas,r8a774a1-cpg-mssr # RZ/G2M + - renesas,r8a774b1-cpg-mssr # RZ/G2N + - renesas,r8a774c0-cpg-mssr # RZ/G2E + - renesas,r8a774e1-cpg-mssr # RZ/G2H + - renesas,r8a7790-cpg-mssr # R-Car H2 + - renesas,r8a7791-cpg-mssr # R-Car M2-W + - renesas,r8a7792-cpg-mssr # R-Car V2H + - renesas,r8a7793-cpg-mssr # R-Car M2-N + - renesas,r8a7794-cpg-mssr # R-Car E2 + - renesas,r8a7795-cpg-mssr # R-Car H3 + - renesas,r8a7796-cpg-mssr # R-Car M3-W + - renesas,r8a77961-cpg-mssr # R-Car M3-W+ + - renesas,r8a77965-cpg-mssr # R-Car M3-N + - renesas,r8a77970-cpg-mssr # R-Car V3M + - renesas,r8a77980-cpg-mssr # R-Car V3H + - renesas,r8a77990-cpg-mssr # R-Car E3 + - renesas,r8a77995-cpg-mssr # R-Car D3 + - renesas,r8a779a0-cpg-mssr # R-Car V3U + - renesas,r8a779f0-cpg-mssr # R-Car S4-8 + - renesas,r8a779g0-cpg-mssr # R-Car V4H + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - extal # All + - extalr # Most R-Car Gen3 and RZ/G2 + - usb_extal # Most R-Car Gen2 and RZ/G1 + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/*-cpg-mssr.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the datasheet. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/MSSR Clock Domain and can be + power-managed through Module Standby should refer to the CPG device node + in their "power-domains" property, as documented by the generic PM Domain + bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the datasheet. + const: 1 + +if: + not: + properties: + compatible: + items: + enum: + - renesas,r7s9210-cpg-mssr +then: + required: + - '#reset-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0xe6150000 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml new file mode 100644 index 000000000..9752ac632 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are + organized in groups of up to 32 gates. + + This device tree binding describes a single 32 gate clocks group per node. + Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle + and the clock index in the group, from 0 to 31. + +properties: + compatible: + items: + - enum: + - renesas,r7s72100-mstp-clocks # RZ/A1 + - renesas,r8a73a4-mstp-clocks # R-Mobile APE6 + - renesas,r8a7740-mstp-clocks # R-Mobile A1 + - renesas,r8a7778-mstp-clocks # R-Car M1 + - renesas,r8a7779-mstp-clocks # R-Car H1 + - renesas,sh73a0-mstp-clocks # SH-Mobile AG5 + - const: renesas,cpg-mstp-clocks + + reg: + minItems: 1 + items: + - description: Module Stop Control Register (MSTPCR) + - description: Module Stop Status Register (MSTPSR) + + clocks: + minItems: 1 + maxItems: 32 + + '#clock-cells': + const: 1 + + clock-indices: + minItems: 1 + maxItems: 32 + + clock-output-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - clock-indices + - clock-output-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a73a4-clock.h> + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a73a4-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xe6150138 4>, <0xe6150040 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1 + R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1 + R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3 + R8A73A4_CLK_DMAC + >; + clock-output-names = + "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3", + "dmac"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml new file mode 100644 index 000000000..4d9a64800 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,emev2-smu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas EMMA Mobile EV2 System Management Unit + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The System Management Unit is described in user's manual R19UH0037EJ1000_SMU. + This is not a clock provider, but clocks under SMU depend on it. + +properties: + compatible: + const: renesas,emev2-smu + + reg: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +patternProperties: + ".*sclkdiv@.*": + type: object + + description: | + Function block with an input mux and a divider, which corresponds to + "Serial clock generator" in fig. "Clock System Overview" of the manual, + and "xxx frequency division setting register" (XXXCLKDIV) registers. + This makes internal (neither input nor output) clock that is provided + to input of xxxGCLK block. + + properties: + compatible: + const: renesas,emev2-smu-clkdiv + + reg: + maxItems: 1 + description: + Byte offset from SMU base and Bit position in the register. + + clocks: + minItems: 1 + maxItems: 4 + + '#clock-cells': + const: 0 + + required: + - compatible + - reg + - clocks + - '#clock-cells' + + additionalProperties: false + + ".*sclk@.*": + type: object + + description: | + Clock gating node shown as "Clock stop processing block" in the + fig. "Clock System Overview" of the manual. + Registers are "xxx clock gate control register" (XXXGCLKCTRL). + + properties: + compatible: + const: renesas,emev2-smu-gclk + + reg: + maxItems: 1 + description: + Byte offset from SMU base and Bit position in the register. + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + required: + - compatible + - reg + - clocks + - '#clock-cells' + + additionalProperties: false + +additionalProperties: true + +examples: + - | + // Example of clock-tree description: + // + // This describes a clock path in the clock tree + // c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk + clocks@e0110000 { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk@4a0,1 { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml new file mode 100644 index 000000000..95bf485c6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,r9a06g032-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1D (R9A06G032) System Controller + +maintainers: + - Gareth Williams <gareth.williams.jx@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + const: renesas,r9a06g032-sysctrl + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: External 40 MHz crystal + - description: Optional external 32.768 kHz crystal + - description: Optional external JTAG input + - description: Optional external RGMII_REFCLK + + clock-names: + minItems: 1 + items: + - const: mclk + - const: rtc + - const: jtag + - const: rgmii_ref_ext + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 0 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-router@[a-f0-9]+$": + type: object + $ref: "../dma/renesas,rzn1-dmamux.yaml#" + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + sysctrl: system-controller@4000c000 { + compatible = "renesas,r9a06g032-sysctrl"; + reg = <0x4000c000 0x1000>; + clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, + <&ext_rgmii_ref>; + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #clock-cells = <1>; + #power-domain-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml new file mode 100644 index 000000000..81f09df71 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car USB 2.0 clock selector + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +description: | + If you connect an external clock to the USB_EXTAL pin only, you should set + the clock rate to "usb_extal" node only. + If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module + is not needed because this is default setting. (Of course, you can set the + clock rates to both "usb_extal" and "usb_xtal" nodes. + + Case 1: An external clock connects to R-Car SoC + +----------+ +--- R-Car ---------------------+ + |External |---|USB_EXTAL ---> all usb channels| + |clock | |USB_XTAL | + +----------+ +-------------------------------+ + + In this case, we need this driver with "usb_extal" clock. + + Case 2: An oscillator connects to R-Car SoC + +----------+ +--- R-Car ---------------------+ + |Oscillator|---|USB_EXTAL -+-> all usb channels| + | |---|USB_XTAL --+ | + +----------+ +-------------------------------+ + In this case, we don't need this selector. + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-rcar-usb2-clock-sel # RZ/G2M + - renesas,r8a774b1-rcar-usb2-clock-sel # RZ/G2N + - renesas,r8a774e1-rcar-usb2-clock-sel # RZ/G2H + - renesas,r8a7795-rcar-usb2-clock-sel # R-Car H3 + - renesas,r8a7796-rcar-usb2-clock-sel # R-Car M3-W + - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+ + - const: renesas,rcar-gen3-usb2-clock-sel + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: ehci_ohci + - const: hs-usb-if + - const: usb_extal + - const: usb_xtal + + '#clock-cells': + const: 0 + + power-domains: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: ehci_ohci + - const: hs-usb-if + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - power-domains + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a7795-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0xe6590630 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal>, <&usb_xtal>; + clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml new file mode 100644 index 000000000..487f74cdc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. On RZ/V2M, the functionality is + similar, but does not have Clock Monitor Registers. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The Module Standby Mode block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + enum: + - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five + - renesas,r9a07g044-cpg # RZ/G2{L,LC} + - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a09g011-cpg # RZ/V2M + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Clock source to CPG can be either from external clock input (EXCLK) or + crystal oscillator (XIN/XOUT). + const: extal + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/r9a0*-cpg.h>, + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/Module Standby Mode Clock Domain and + can be power-managed through Module Standby should refer to the CPG device + node in their "power-domains" property, as documented by the generic PM + Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + <dt-bindings/clock/r9a0*-cpg.h>. + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044-cpg"; + reg = <0x11010000 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml new file mode 100644 index 000000000..8d4eb4475 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Versaclock7 Programmable Clock Device Tree Bindings + +maintainers: + - Alex Helms <alexander.helms.jy@renesas.com> + +description: | + Renesas Versaclock7 is a family of configurable clock generator and + jitter attenuator ICs with fractional and integer dividers. + +properties: + '#clock-cells': + const: 1 + + compatible: + enum: + - renesas,rc21008a + + reg: + maxItems: 1 + + clocks: + items: + - description: External crystal or oscillator + + clock-names: + items: + - const: xin + +required: + - '#clock-cells' + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + vc7_xin: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <49152000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + vc7: clock-controller@9 { + compatible = "renesas,rc21008a"; + reg = <0x9>; + #clock-cells = <1>; + clocks = <&vc7_xin>; + clock-names = "xin"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml new file mode 100644 index 000000000..0f0f64b6f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PX30 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The PX30 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "i2sx_clkin" - external I2S clock - optional + - "gmac_clkin" - external GMAC clock - optional + +properties: + compatible: + enum: + - rockchip,px30-cru + - rockchip,px30-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 1 + items: + - description: Clock for both PMUCRU and CRU + - description: Clock for CRU (sourced from PMUCRU) + + clock-names: + minItems: 1 + items: + - const: xin24m + - const: gpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#reset-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,px30-cru + + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0xff2bc000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0xff2b0000 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml new file mode 100644 index 000000000..ba5b45464 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3036 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3036 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "rmii_clkin" - external EMAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3036-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3036-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml new file mode 100644 index 000000000..b3d9c8eca --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3126/RK3128 clock controller generates and supplies clock to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + +properties: + compatible: + enum: + - rockchip,rk3126-cru + - rockchip,rk3128-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: xin24m + - enum: + - ext_i2s + - gmac_clkin + - enum: + - ext_i2s + - gmac_clkin + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3128-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file mode 100644 index 000000000..ddd7e46af --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3066a-cru + - rockchip,rk3188-cru + - rockchip,rk3188a-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml new file mode 100644 index 000000000..1050fff72 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3228 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3228 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +properties: + compatible: + enum: + - rockchip,rk3228-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3228-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml new file mode 100644 index 000000000..6655e97d5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3288 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3288 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + + A revision of this SoC is available: rk3288w. The clock tree is a bit + different so another dt-compatible is available. Noticed that it is only + setting the difference but there is no automatic revision detection. This + should be performed by boot loaders. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_hsadc" - external HSADC clock - optional, + - "ext_edp_24m" - external display port clock - optional, + - "ext_vip" - external VIP clock - optional, + - "ext_isp" - external ISP clock - optional, + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3288-cru + - rockchip,rk3288w-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3288-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml new file mode 100644 index 000000000..fec37f5b8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3308 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3308 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", + "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in", + "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or + SPDIF clock - optional + - "mac_clkin" - external MAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3308-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0xff500000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt new file mode 100644 index 000000000..904ae682e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt @@ -0,0 +1,58 @@ +* Rockchip RK3328 Clock and Reset Unit + +The RK3328 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3328-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "clkin_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + - "hdmi_phy" - output clock of the hdmi phy pll - optional + +Example: Clock controller node: + + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru"; + reg = <0x0 0xff440000 0x0 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff120000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff120000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml new file mode 100644 index 000000000..90af242b4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3368 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3368 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_isp" - external ISP clock - optional + - "ext_jtag" - external JTAG clock - optional + - "ext_vip" - external VIP clock - optional + - "usbotg_out" - output clock of the pll in the otg phy + +properties: + compatible: + enum: + - rockchip,rk3368-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml new file mode 100644 index 000000000..0b758e015 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3399 Clock and Reset Unit + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3399 clock controller generates and supplies clock to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "clkin_gmac" - external GMAC clock - optional, + - "clkin_i2s" - external I2S clock - optional, + - "pclkin_cif" - external ISP clock - optional, + - "clk_usbphy0_480m" - output clock of the pll in the usbphy0 + - "clk_usbphy1_480m" - output clock of the pll in the usbphy1 + +properties: + compatible: + enum: + - rockchip,rk3399-pmucru + - rockchip,rk3399-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files". It is used + for GRF muxes, if missing any muxes present in the GRF will not be + available. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + pmucru: clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0xff750000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0xff760000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml new file mode 100644 index 000000000..fc7546f52 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROCKCHIP rk3568 Family Clock Control Module Binding + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3568 clock controller generates the clock and also implements a + reset controller for SoC peripherals. + (examples: provide SCLK_UART1\PCLK_UART1 and SRST_P_UART1\SRST_S_UART1 for UART module) + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be + used in device tree sources. + +properties: + compatible: + enum: + - rockchip,rk3568-cru + - rockchip,rk3568-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + pmucru: clock-controller@fdd00000 { + compatible = "rockchip,rk3568-pmucru"; + reg = <0xfdd00000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + - | + cru: clock-controller@fdd20000 { + compatible = "rockchip,rk3568-cru"; + reg = <0xfdd20000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml new file mode 100644 index 000000000..4611d920b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1108 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RV1108 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_vip" - external VIP clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "hdmiphy" - external clock input derived from HDMI PHY - optional + - "usbphy" - external clock input derived from USB PHY - optional + +properties: + compatible: + enum: + - rockchip,rv1108-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml new file mode 100644 index 000000000..0998f8b92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1126 Clock and Reset Unit + +maintainers: + - Jagan Teki <jagan@edgeble.ai> + - Finley Xiao <finley.xiao@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: + The RV1126 clock controller generates the clock and also implements a + reset controller for SoC peripherals. + +properties: + compatible: + enum: + - rockchip,rv1126-cru + - rockchip,rv1126-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff490000 { + compatible = "rockchip,rv1126-cru"; + reg = <0xff490000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml new file mode 100644 index 000000000..d819dfaaf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Audio SubSystem clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos-audss-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos4210-audss-clock + - samsung,exynos5250-audss-clock + - samsung,exynos5410-audss-clock + - samsung,exynos5420-audss-clock + + clocks: + minItems: 2 + items: + - description: + Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is + used if not specified. + - description: + Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is + used if not specified. + - description: + Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not + specified. + - description: + PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not specified. + - description: + External i2s clock, parent of mout_i2s. "cdclk0" is used if not + specified. + + clock-names: + minItems: 2 + items: + - const: pll_ref + - const: pll_in + - const: sclk_audio + - const: sclk_pcm_in + - const: cdclk + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0c>; + #clock-cells = <1>; + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml new file mode 100644 index 000000000..0589a63e2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + dt-bindings/clock/ headers. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos3250-cmu + - samsung,exynos3250-cmu-dmc + - samsung,exynos3250-cmu-isp + - samsung,exynos4210-clock + - samsung,exynos4412-clock + - samsung,exynos5250-clock + - items: + - enum: + - samsung,exynos5420-clock + - samsung,exynos5800-clock + - const: syscon + + clocks: + minItems: 1 + maxItems: 4 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + clock: clock-controller@10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml new file mode 100644 index 000000000..c98eff64f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-ext-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC external/osc/XXTI/XusbXTI clock + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Samsung SoCs require an external clock supplied through XXTI or XusbXTI pins. + +properties: + compatible: + enum: + - samsung,clock-xxti + - samsung,clock-xusbxti + - samsung,exynos5420-oscclk + + "#clock-cells": + const: 0 + + clock-frequency: true + + clock-output-names: + maxItems: 1 + +required: + - compatible + - clock-frequency + +additionalProperties: false + +examples: + - | + fixed-rate-clocks { + clock { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml new file mode 100644 index 000000000..bee13436d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos4412-isp-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos4412 SoC ISP clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Clock controller for Samsung Exynos4412 SoC FIMC-ISP (Camera ISP) + All available clocks are defined as preprocessor macros in + dt-bindings/clock/ headers. + +properties: + compatible: + const: samsung,exynos4412-isp-clock + + clocks: + items: + - description: CLK_ACLK200 from the main clock controller + - description: CLK_ACLK400_MCUISP from the main clock controller + + clock-names: + items: + - const: aclk200 + - const: aclk400_mcuisp + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - power-domains + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml new file mode 100644 index 000000000..b05f83533 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml @@ -0,0 +1,382 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5260 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "fin_pll" - PLL input clock from XXTI + - "xrtcxti" - input clock from XRTCXTI + - "ioclk_pcm_extclk" - pcm external operation clock + - "ioclk_spdif_extclk" - spdif external operation clock + - "ioclk_i2s_cdclk" - i2s0 codec clock + + Phy clocks:: + There are several clocks which are generated by specific PHYs. These clocks + are fed into the clock controller and then routed to the hardware blocks. + These clocks are defined as fixed clocks in the driver with following names:: + - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3 + - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2 + - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1 + - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0 + - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock + - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock + - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link + - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock + - "phyclk_dptx_phy_clk_div2" + - "phyclk_mipi_dphy_4l_m_rxclkesc0" + - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock + - "phyclk_usbhost20_phy_freeclk" + - "phyclk_usbhost20_phy_clk48mohci" + - "phyclk_usbdrd30_udrd30_pipe_pclk" + - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos5260-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos5260-clock-top + - samsung,exynos5260-clock-peri + - samsung,exynos5260-clock-egl + - samsung,exynos5260-clock-kfc + - samsung,exynos5260-clock-g2d + - samsung,exynos5260-clock-mif + - samsung,exynos5260-clock-mfc + - samsung,exynos5260-clock-g3d + - samsung,exynos5260-clock-fsys + - samsung,exynos5260-clock-aud + - samsung,exynos5260-clock-isp + - samsung,exynos5260-clock-gscl + - samsung,exynos5260-clock-disp + + clocks: + minItems: 1 + maxItems: 19 + + clock-names: + minItems: 1 + maxItems: 19 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-top + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: fin_pll + - const: dout_mem_pll + - const: dout_bus_pll + - const: dout_media_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-peri + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: fin_pll + - const: ioclk_pcm_extclk + - const: ioclk_i2s_cdclk + - const: ioclk_spdif_extclk + - const: phyclk_hdmi_phy_ref_cko + - const: dout_aclk_peri_66 + - const: dout_sclk_peri_uart0 + - const: dout_sclk_peri_uart1 + - const: dout_sclk_peri_uart2 + - const: dout_sclk_peri_spi0_b + - const: dout_sclk_peri_spi1_b + - const: dout_sclk_peri_spi2_b + - const: dout_aclk_peri_aud + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-egl + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_bus_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-kfc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_media_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-g2d + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_g2d_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-mif + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: fin_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-mfc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_mfc_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-g3d + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: fin_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-fsys + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: fin_pll + - const: phyclk_usbhost20_phy_phyclock + - const: phyclk_usbhost20_phy_freeclk + - const: phyclk_usbhost20_phy_clk48mohci + - const: phyclk_usbdrd30_udrd30_pipe_pclk + - const: phyclk_usbdrd30_udrd30_phyclock + - const: dout_aclk_fsys_200 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-aud + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: fin_pll + - const: fout_aud_pll + - const: ioclk_i2s_cdclk + - const: ioclk_pcm_extclk + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-isp + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_isp1_266 + - const: dout_aclk_isp1_400 + - const: mout_aclk_isp1_266 + + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-gscl + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_gscl_400 + - const: dout_aclk_gscl_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-disp + then: + properties: + clocks: + minItems: 19 + maxItems: 19 + clock-names: + items: + - const: fin_pll + - const: phyclk_dptx_phy_ch3_txd_clk + - const: phyclk_dptx_phy_ch2_txd_clk + - const: phyclk_dptx_phy_ch1_txd_clk + - const: phyclk_dptx_phy_ch0_txd_clk + - const: phyclk_hdmi_phy_tmds_clko + - const: phyclk_hdmi_phy_ref_clko + - const: phyclk_hdmi_phy_pixel_clko + - const: phyclk_hdmi_link_o_tmds_clkhi + - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs + - const: phyclk_dptx_phy_o_ref_clk_24m + - const: phyclk_dptx_phy_clk_div2 + - const: phyclk_mipi_dphy_4l_m_rxclkesc0 + - const: phyclk_hdmi_phy_ref_cko + - const: ioclk_spdif_extclk + - const: dout_aclk_peri_aud + - const: dout_aclk_disp_222 + - const: dout_sclk_disp_pixel + - const: dout_aclk_disp_333 + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5260-clk.h> + + fin_pll: clock { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + clock-controller@10010000 { + compatible = "samsung,exynos5260-clock-top"; + reg = <0x10010000 0x10000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_mif MIF_DOUT_MEM_PLL>, + <&clock_mif MIF_DOUT_BUS_PLL>, + <&clock_mif MIF_DOUT_MEDIA_PLL>; + clock-names = "fin_pll", + "dout_mem_pll", + "dout_bus_pll", + "dout_media_pll"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml new file mode 100644 index 000000000..b737c9d35 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5410 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "fin_pll" - PLL input clock from XXTI + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos5410.h header. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos5410-clock + + clocks: + description: + Should contain an entry specifying the root clock from external + oscillator supplied through XXTI or XusbXTI pin. This clock should be + defined using standard clock bindings with "fin_pll" clock-output-name. + That clock is being passed internally to the 9 PLLs. + maxItems: 1 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5410.h> + + fin_pll: osc-clock { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + clocks = <&fin_pll>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml new file mode 100644 index 000000000..3f9326e09 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml @@ -0,0 +1,524 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5433 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "oscclk" - PLL input clock from XXTI + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos5433.h header. + +properties: + compatible: + enum: + # CMU_TOP which generates clocks for + # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus + # clocks + - samsung,exynos5433-cmu-top + # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP + - samsung,exynos5433-cmu-cpif + # CMU_MIF which generates clocks for DRAM Memory Controller domain + - samsung,exynos5433-cmu-mif + # CMU_PERIC which generates clocks for + # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs + - samsung,exynos5433-cmu-peric + # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs + - samsung,exynos5433-cmu-peris + # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs + - samsung,exynos5433-cmu-fsys + - samsung,exynos5433-cmu-g2d + # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs + - samsung,exynos5433-cmu-disp + - samsung,exynos5433-cmu-aud + - samsung,exynos5433-cmu-bus0 + - samsung,exynos5433-cmu-bus1 + - samsung,exynos5433-cmu-bus2 + - samsung,exynos5433-cmu-g3d + - samsung,exynos5433-cmu-gscl + - samsung,exynos5433-cmu-apollo + # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor, + # CoreSight and L2 cache controller + - samsung,exynos5433-cmu-atlas + # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and + # JPEG IPs + - samsung,exynos5433-cmu-mscl + - samsung,exynos5433-cmu-mfc + - samsung,exynos5433-cmu-hevc + # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs + - samsung,exynos5433-cmu-isp + # CMU_CAM0 which generates clocks for + # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs + - samsung,exynos5433-cmu-cam0 + # CMU_CAM1 which generates clocks for + # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs + - samsung,exynos5433-cmu-cam1 + # CMU_IMEM which generates clocks for SSS (Security SubSystem) and + # SlimSSS IPs + - samsung,exynos5433-cmu-imem + + clocks: + minItems: 1 + maxItems: 10 + + clock-names: + minItems: 1 + maxItems: 10 + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-top + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: oscclk + - const: sclk_mphy_pll + - const: sclk_mfc_pll + - const: sclk_bus_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-cpif + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: oscclk + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-mif + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: sclk_mphy_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-fsys + then: + properties: + clocks: + minItems: 10 + maxItems: 10 + clock-names: + items: + - const: oscclk + - const: sclk_ufs_mphy + - const: aclk_fsys_200 + - const: sclk_pcie_100_fsys + - const: sclk_ufsunipro_fsys + - const: sclk_mmc2_fsys + - const: sclk_mmc1_fsys + - const: sclk_mmc0_fsys + - const: sclk_usbhost30_fsys + - const: sclk_usbdrd30_fsys + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-g2d + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: aclk_g2d_266 + - const: aclk_g2d_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-disp + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: oscclk + - const: sclk_dsim1_disp + - const: sclk_dsim0_disp + - const: sclk_dsd_disp + - const: sclk_decon_tv_eclk_disp + - const: sclk_decon_vclk_disp + - const: sclk_decon_eclk_disp + - const: sclk_decon_tv_vclk_disp + - const: aclk_disp_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-aud + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: fout_aud_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-bus0 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: aclk_bus0_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-bus1 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: aclk_bus1_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-bus2 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_bus2_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-g3d + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_g3d_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-gscl + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: aclk_gscl_111 + - const: aclk_gscl_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-apollo + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: sclk_bus_pll_apollo + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-atlas + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: sclk_bus_pll_atlas + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-mscl + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: sclk_jpeg_mscl + - const: aclk_mscl_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-mfc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_mfc_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-hevc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_hevc_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-isp + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: aclk_isp_dis_400 + - const: aclk_isp_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-cam0 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: oscclk + - const: aclk_cam0_333 + - const: aclk_cam0_400 + - const: aclk_cam0_552 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-cam1 + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: oscclk + - const: sclk_isp_uart_cam1 + - const: sclk_isp_spi1_cam1 + - const: sclk_isp_spi0_cam1 + - const: aclk_cam1_333 + - const: aclk_cam1_400 + - const: aclk_cam1_552 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-imem + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: oscclk + - const: aclk_imem_sssx_266 + - const: aclk_imem_266 + - const: aclk_imem_200 + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + xxti: clock { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml new file mode 100644 index 000000000..c137c6744 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml @@ -0,0 +1,272 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos7 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "fin_pll" - PLL input clock from XXTI + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos7-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos7-clock-topc + - samsung,exynos7-clock-top0 + - samsung,exynos7-clock-top1 + - samsung,exynos7-clock-ccore + - samsung,exynos7-clock-peric0 + - samsung,exynos7-clock-peric1 + - samsung,exynos7-clock-peris + - samsung,exynos7-clock-fsys0 + - samsung,exynos7-clock-fsys1 + - samsung,exynos7-clock-mscl + - samsung,exynos7-clock-aud + + clocks: + minItems: 1 + maxItems: 13 + + clock-names: + minItems: 1 + maxItems: 13 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-top0 + then: + properties: + clocks: + minItems: 6 + maxItems: 6 + clock-names: + items: + - const: fin_pll + - const: dout_sclk_bus0_pll + - const: dout_sclk_bus1_pll + - const: dout_sclk_cc_pll + - const: dout_sclk_mfc_pll + - const: dout_sclk_aud_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-top1 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: fin_pll + - const: dout_sclk_bus0_pll + - const: dout_sclk_bus1_pll + - const: dout_sclk_cc_pll + - const: dout_sclk_mfc_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-ccore + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_ccore_133 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-peric0 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_peric0_66 + - const: sclk_uart0 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-peric1 + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_peric1_66 + - const: sclk_uart1 + - const: sclk_uart2 + - const: sclk_uart3 + - const: sclk_spi0 + - const: sclk_spi1 + - const: sclk_spi2 + - const: sclk_spi3 + - const: sclk_spi4 + - const: sclk_i2s1 + - const: sclk_pcm1 + - const: sclk_spdif + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-peris + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_peris_66 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-fsys0 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_fsys0_200 + - const: dout_sclk_mmc2 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-fsys1 + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_fsys1_200 + - const: dout_sclk_mmc0 + - const: dout_sclk_mmc1 + - const: dout_sclk_ufsunipro20 + - const: dout_sclk_phy_fsys1 + - const: dout_sclk_phy_fsys1_26m + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-aud + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: fout_aud_pll + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos7-clk.h> + + fin_pll: clock { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + clock-controller@105e0000 { + compatible = "samsung,exynos7-clock-top1"; + reg = <0x105e0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", + "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", + "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml new file mode 100644 index 000000000..006d33a9e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos7885 SoC clock controller + +maintainers: + - Dávid Virág <virag.david003@gmail.com> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Exynos7885 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. The root clock in that root tree + is an external clock: OSCCLK (26 MHz). This external clock must be defined + as a fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'dt-bindings/clock/exynos7885.h' header. + +properties: + compatible: + enum: + - samsung,exynos7885-cmu-top + - samsung,exynos7885-cmu-core + - samsung,exynos7885-cmu-fsys + - samsung,exynos7885-cmu-peri + + clocks: + minItems: 1 + maxItems: 10 + + clock-names: + minItems: 1 + maxItems: 10 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + - description: CCI clock (from CMU_TOP) + - description: G3D clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_core_bus + - const: dout_core_cci + - const: dout_core_g3d + + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-fsys + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS bus clock (from CMU_TOP) + - description: MMC_CARD clock (from CMU_TOP) + - description: MMC_EMBD clock (from CMU_TOP) + - description: MMC_SDIO clock (from CMU_TOP) + - description: USB30DRD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_fsys_bus + - const: dout_fsys_mmc_card + - const: dout_fsys_mmc_embd + - const: dout_fsys_mmc_sdio + - const: dout_fsys_usb30drd + + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-peri + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERI bus clock (from CMU_TOP) + - description: SPI0 clock (from CMU_TOP) + - description: SPI1 clock (from CMU_TOP) + - description: UART0 clock (from CMU_TOP) + - description: UART1 clock (from CMU_TOP) + - description: UART2 clock (from CMU_TOP) + - description: USI0 clock (from CMU_TOP) + - description: USI1 clock (from CMU_TOP) + - description: USI2 clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_peri_bus + - const: dout_peri_spi0 + - const: dout_peri_spi1 + - const: dout_peri_uart0 + - const: dout_peri_uart1 + - const: dout_peri_uart2 + - const: dout_peri_usi0 + - const: dout_peri_usi1 + - const: dout_peri_usi2 + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_PERI + - | + #include <dt-bindings/clock/exynos7885.h> + + cmu_peri: clock-controller@10010000 { + compatible = "samsung,exynos7885-cmu-peri"; + reg = <0x10010000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_PERI_BUS>, + <&cmu_top CLK_DOUT_PERI_SPI0>, + <&cmu_top CLK_DOUT_PERI_SPI1>, + <&cmu_top CLK_DOUT_PERI_UART0>, + <&cmu_top CLK_DOUT_PERI_UART1>, + <&cmu_top CLK_DOUT_PERI_UART2>, + <&cmu_top CLK_DOUT_PERI_USI0>, + <&cmu_top CLK_DOUT_PERI_USI1>, + <&cmu_top CLK_DOUT_PERI_USI2>; + clock-names = "oscclk", + "dout_peri_bus", + "dout_peri_spi0", + "dout_peri_spi1", + "dout_peri_uart0", + "dout_peri_uart1", + "dout_peri_uart2", + "dout_peri_usi0", + "dout_peri_usi1", + "dout_peri_usi2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml new file mode 100644 index 000000000..141cf173f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos850 SoC clock controller + +maintainers: + - Sam Protsenko <semen.protsenko@linaro.org> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Exynos850 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external + clocks must be defined as fixed-rate clocks in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'dt-bindings/clock/exynos850.h' header. + +properties: + compatible: + enum: + - samsung,exynos850-cmu-top + - samsung,exynos850-cmu-apm + - samsung,exynos850-cmu-aud + - samsung,exynos850-cmu-cmgp + - samsung,exynos850-cmu-core + - samsung,exynos850-cmu-dpu + - samsung,exynos850-cmu-hsi + - samsung,exynos850-cmu-is + - samsung,exynos850-cmu-mfcmscl + - samsung,exynos850-cmu-peri + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-apm + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_APM bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_apm_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-aud + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: AUD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_aud + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-cmgp + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CMGP bus clock (from CMU_APM) + + clock-names: + items: + - const: oscclk + - const: gout_clkcmu_cmgp_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + - description: CCI clock (from CMU_TOP) + - description: eMMC clock (from CMU_TOP) + - description: SSS clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_core_bus + - const: dout_core_cci + - const: dout_core_mmc_embd + - const: dout_core_sss + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-dpu + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: DPU clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_dpu + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-hsi + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: External RTC clock (32768 Hz) + - description: CMU_HSI bus clock (from CMU_TOP) + - description: SD card clock (from CMU_TOP) + - description: "USB 2.0 DRD clock (from CMU_TOP)" + + clock-names: + items: + - const: oscclk + - const: rtcclk + - const: dout_hsi_bus + - const: dout_hsi_mmc_card + - const: dout_hsi_usb20drd + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-is + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_IS bus clock (from CMU_TOP) + - description: Image Texture Processing core clock (from CMU_TOP) + - description: Visual Recognition Accelerator clock (from CMU_TOP) + - description: Geometric Distortion Correction clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_is_bus + - const: dout_is_itp + - const: dout_is_vra + - const: dout_is_gdc + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-mfcmscl + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: Multi-Format Codec clock (from CMU_TOP) + - description: Memory to Memory Scaler clock (from CMU_TOP) + - description: Multi-Channel Scaler clock (from CMU_TOP) + - description: JPEG codec clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_mfcmscl_mfc + - const: dout_mfcmscl_m2m + - const: dout_mfcmscl_mcsc + - const: dout_mfcmscl_jpeg + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-peri + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERI bus clock (from CMU_TOP) + - description: UART clock (from CMU_TOP) + - description: Parent clock for HSI2C and SPI (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_peri_bus + - const: dout_peri_uart + - const: dout_peri_ip + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_PERI + - | + #include <dt-bindings/clock/exynos850.h> + + cmu_peri: clock-controller@10030000 { + compatible = "samsung,exynos850-cmu-peri"; + reg = <0x10030000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>, + <&cmu_top CLK_DOUT_PERI_UART>, + <&cmu_top CLK_DOUT_PERI_IP>; + clock-names = "oscclk", "dout_peri_bus", + "dout_peri_uart", "dout_peri_ip"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml new file mode 100644 index 000000000..55c4f94a1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml @@ -0,0 +1,263 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Auto v9 SoC clock controller + +maintainers: + - Chanho Park <chanho61.park@samsung.com> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Exynos Auto v9 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz). + The external OSCCLK must be defined as fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynosautov9.h' header. + +properties: + compatible: + enum: + - samsung,exynosautov9-cmu-top + - samsung,exynosautov9-cmu-busmc + - samsung,exynosautov9-cmu-core + - samsung,exynosautov9-cmu-fsys0 + - samsung,exynosautov9-cmu-fsys1 + - samsung,exynosautov9-cmu-fsys2 + - samsung,exynosautov9-cmu-peric0 + - samsung,exynosautov9-cmu-peric1 + - samsung,exynosautov9-cmu-peris + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-busmc + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_BUSMC bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_busmc_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_core_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS0 bus clock (from CMU_TOP) + - description: CMU_FSYS0 pcie clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys0_bus + - const: dout_clkcmu_fsys0_pcie + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS1 bus clock (from CMU_TOP) + - description: CMU_FSYS1 mmc card clock (from CMU_TOP) + - description: CMU_FSYS1 usb clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys1_bus + - const: gout_clkcmu_fsys1_mmc_card + - const: dout_clkcmu_fsys1_usbdrd + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys2 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS2 bus clock (from CMU_TOP) + - description: UFS clock (from CMU_TOP) + - description: Ethernet clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys2_bus + - const: dout_fsys2_clkcmu_ufs_embd + - const: dout_fsys2_clkcmu_ethernet + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC0 bus clock (from CMU_TOP) + - description: PERIC0 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric0_bus + - const: dout_clkcmu_peric0_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC1 bus clock (from CMU_TOP) + - description: PERIC1 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric1_bus + - const: dout_clkcmu_peric1_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peris + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIS bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peris_bus + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_FSYS2 + - | + #include <dt-bindings/clock/samsung,exynosautov9.h> + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml new file mode 100644 index 000000000..d5296e605 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2M and S5M family clock generator block + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz + outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs. + + All available clocks are defined as preprocessor macros in + dt-bindings/clock/samsung,s2mps11.h header. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +properties: + compatible: + enum: + - samsung,s2mps11-clk + - samsung,s2mps13-clk # S2MPS13 and S2MPS15 + - samsung,s2mps14-clk + - samsung,s5m8767-clk + + "#clock-cells": + const: 1 + + clock-output-names: + maxItems: 3 + description: Names for AP, CP and BT clocks. + +required: + - compatible + - "#clock-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt new file mode 100644 index 000000000..2632d3f13 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -0,0 +1,49 @@ +* Samsung S3C2410 Clock Controller + +The S3C2410 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2410, +s3c2440 and s3c2442 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC. + - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC. + - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2410.h header and can be used in device +tree sources. + +External clocks: + +The xti clock used as input for the plls is generated outside the SoC. It is +expected that is are defined using standard clock bindings with a +clock-output-names value of "xti". + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2410-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt new file mode 100644 index 000000000..21a8c23e6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -0,0 +1,49 @@ +* Samsung S3C2412 Clock Controller + +The S3C2412 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2412 +and s3c2413 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be "samsung,s3c2412-clock" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2412.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2412-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2412-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt new file mode 100644 index 000000000..985c0f574 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -0,0 +1,55 @@ +* Samsung S3C2443 Clock Controller + +The S3C2443 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to all SoCs in +the s3c24x family starting with the s3c2443. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC. + - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC. + - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2443.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_uart" - external uart clock - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt new file mode 100644 index 000000000..872ee8e0f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt @@ -0,0 +1,76 @@ +* Samsung S3C64xx Clock Controller + +The S3C64xx clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to all SoCs in +the S3C64xx family. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC. + - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular S3C64xx SoC and this is specified where applicable. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "fin_pll" - PLL input clock (xtal/extclk) - required, + - "xusbxti" - USB xtal - required, + - "iiscdclk0" - I2S0 codec clock - optional, + - "iiscdclk1" - I2S1 codec clock - optional, + - "iiscdclk2" - I2S2 codec clock - optional, + - "pcmcdclk0" - PCM0 codec clock - optional, + - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410. + +Example: Clock controller node: + + clock: clock-controller@7e00f000 { + compatible = "samsung,s3c6410-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + }; + +Example: Required external clocks: + + fin_pll: clock-fin-pll { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + clock-frequency = <12000000>; + #clock-cells = <0>; + }; + + xusbxti: clock-xusbxti { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + uart0: serial@7f005000 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <5>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>, + <&clock SCLK_UART>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml new file mode 100644 index 000000000..2659854ea --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s5pv210-audss-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5Pv210 SoC Audio SubSystem clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/s5pv210-audss.h header. + +properties: + compatible: + const: samsung,s5pv210-audss-clock + + clocks: + minItems: 4 + items: + - description: + AHB bus clock of the Audio Subsystem. + - description: + Optional fixed rate PLL reference clock, parent of mout_audss. If not + specified (i.e. xusbxti is used for PLL reference), it is fixed to a + clock named "xxti". + - description: + Input PLL to the AudioSS block, parent of mout_audss. + - description: + Audio bus clock, parent of mout_i2s. + - description: + Optional external i2s clock, parent of mout_i2s. If not specified, it + is fixed to a clock named "iiscdclk0". + + clock-names: + minItems: 4 + items: + - const: hclk + - const: xxti + - const: fout_epll + - const: sclk_audio0 + - const: iiscdclk0 + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/s5pv210.h> + + clock-controller@c0900000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xc0900000 0x1000>; + #clock-cells = <1>; + clock-names = "hclk", "xxti", "fout_epll", "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml new file mode 100644 index 000000000..67a33665c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of + the SoC, + - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO + pins of the SoC, + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/s5pv210.h header. + +properties: + compatible: + enum: + - samsung,s5pv210-clock + - samsung,s5p6442-clock + + clocks: + items: + - description: xxti clock + - description: xusbxti clock + + clock-names: + items: + - const: xxti + - const: xusbxti + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/s5pv210.h> + + xxti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + + clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml new file mode 100644 index 000000000..c3be1b600 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI) + +maintainers: + - Sagar Kadam <sagar.kadam@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + On the FU540 family of SoCs, most system-wide clock and reset integration + is via the PRCI IP block. + The clock consumer should specify the desired clock via the clock ID + macros defined in include/dt-bindings/clock/sifive-fu540-prci.h. + These macros begin with PRCI_CLK_. + + The hfclk and rtcclk nodes are required, and represent physical + crystals or resonators located on the PCB. These nodes should be present + underneath /, rather than /soc. + +properties: + compatible: + const: sifive,fu540-c000-prci + + reg: + maxItems: 1 + + clocks: + items: + - description: high frequency clock. + - description: RTL clock. + + clock-names: + items: + - const: hfclk + - const: rtcclk + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + prci: clock-controller@10000000 { + compatible = "sifive,fu540-c000-prci"; + reg = <0x10000000 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml new file mode 100644 index 000000000..252085a0c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI) + +maintainers: + - Zong Li <zong.li@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + On the FU740 family of SoCs, most system-wide clock and reset integration + is via the PRCI IP block. + The clock consumer should specify the desired clock via the clock ID + macros defined in include/dt-bindings/clock/sifive-fu740-prci.h. + These macros begin with PRCI_CLK_. + + The hfclk and rtcclk nodes are required, and represent physical + crystals or resonators located on the PCB. These nodes should be present + underneath /, rather than /soc. + +properties: + compatible: + const: sifive,fu740-c000-prci + + reg: + maxItems: 1 + + clocks: + items: + - description: high frequency clock. + - description: RTL clock. + + clock-names: + items: + - const: hfclk + - const: rtcclk + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + prci: clock-controller@10000000 { + compatible = "sifive,fu740-c000-prci"; + reg = <0x10000000 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt new file mode 100644 index 000000000..a4f28ec86 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt @@ -0,0 +1,24 @@ +Binding for Silicon Labs 514 programmable I2C clock generator. + +Reference +This binding uses the common clock binding[1]. Details about the device can be +found in the datasheet[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si514 datasheet + https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf + +Required properties: + - compatible: Shall be "silabs,si514" + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si514". + +Example: + si514: clock-generator@55 { + reg = <0x55>; + #clock-cells = <0>; + compatible = "silabs,si514"; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt new file mode 100644 index 000000000..ce55aba0c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt @@ -0,0 +1,175 @@ +Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable +i2c clock generator. + +Reference +[1] Si5341 Data Sheet + https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf +[2] Si5341 Reference Manual + https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf +[3] Si5345 Reference Manual + https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf + +The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output +clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which +in turn can be directed to any of the 10 (or 4) outputs through a divider. +The internal structure of the clock generators can be found in [2]. +The Si5345 is similar to the Si5341 with the addition of fractional input +dividers and automatic input selection, as described in [3]. +The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs. + +The driver can be used in "as is" mode, reading the current settings from the +chip at boot, in case you have a (pre-)programmed device. If the PLL is not +configured when the driver probes, it assumes the driver must fully initialize +it. + +The device type, speed grade and revision are determined runtime by probing. + +The driver currently does not support any fancy input configurations. They can +still be programmed into the chip and the driver will leave them "as is". + +==I2C device node== + +Required properties: +- compatible: shall be one of the following: + "silabs,si5340" - Si5340 A/B/C/D + "silabs,si5341" - Si5341 A/B/C/D + "silabs,si5342" - Si5342 A/B/C/D + "silabs,si5344" - Si5344 A/B/C/D + "silabs,si5345" - Si5345 A/B/C/D +- reg: i2c device address, usually 0x74 +- #clock-cells: from common clock binding; shall be set to 2. + The first value is "0" for outputs, "1" for synthesizers. + The second value is the output or synthesizer index. +- clocks: from common clock binding; list of parent clock handles, + corresponding to inputs. Use a fixed clock for the "xtal" input. + At least one must be present. +- clock-names: One of: "xtal", "in0", "in1", "in2" + +Optional properties: +- vdd-supply: Regulator node for VDD +- vdda-supply: Regulator node for VDDA +- vdds-supply: Regulator node for VDDS +- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL + feedback divider. Must be such that the PLL output is in the valid range. For + example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only + the fraction matters, using 3500 and 12 will deliver the exact same result. + If these are not specified, and the PLL is not yet programmed when the driver + probes, the PLL will be set to 14GHz. +- silabs,reprogram: When present, the driver will always assume the device must + be initialized, and always performs the soft-reset routine. Since this will + temporarily stop all output clocks, don't do this if the chip is generating + the CPU clock for example. +- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used + in EXTCLK (external reference clock) rather than XTAL (crystal) mode. +- interrupts: Interrupt for INTRb pin. +- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V + rather than 1.8V thresholds. +- vddoX-supply (where X is an output index): Regulator node for VDDO for the + specified output. The driver selects the output VDD_SEL setting based on this + voltage. +- #address-cells: shall be set to 1. +- #size-cells: shall be set to 0. + + +== Child nodes: Outputs == + +The child nodes list the output clocks. + +Each of the clock outputs can be overwritten individually by using a child node. +If a child node for a clock output is not set, the configuration remains +unchanged. + +Required child node properties: +- reg: number of clock output. + +Optional child node properties: +- silabs,format: Output format, one of: + 1 = differential (defaults to LVDS levels) + 2 = low-power (defaults to HCSL levels) + 4 = LVCMOS +- silabs,common-mode: Manually override output common mode, see [2] for values +- silabs,amplitude: Manually override output amplitude, see [2] for values +- silabs,synth-master: boolean. If present, this output is allowed to change the + multisynth frequency dynamically. +- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH + when disabled, otherwise it's driven LOW. + +==Example== + +/* 48MHz reference crystal */ +ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; +}; + +i2c-master-node { + /* Programmable clock (for logic) */ + si5341: clock-generator@74 { + reg = <0x74>; + compatible = "silabs,si5341"; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + + silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */ + silabs,pll-m-den = <48>; + silabs,reprogram; /* Chips are not programmed, always reset */ + + out@0 { + reg = <0>; + silabs,format = <1>; /* LVDS 3v3 */ + silabs,common-mode = <3>; + silabs,amplitude = <3>; + silabs,synth-master; + }; + + /* + * Output 6 configuration: + * LVDS 1v8 + */ + out@6 { + reg = <6>; + silabs,format = <1>; /* LVDS 1v8 */ + silabs,common-mode = <13>; + silabs,amplitude = <3>; + }; + + /* + * Output 8 configuration: + * HCSL 3v3 + */ + out@8 { + reg = <8>; + silabs,format = <2>; + silabs,common-mode = <11>; + silabs,amplitude = <3>; + }; + }; +}; + +some-video-node { + /* Standard clock bindings */ + clock-names = "pixel"; + clocks = <&si5341 0 7>; /* Output 7 */ + + /* Set output 7 to use syntesizer 3 as its parent */ + assigned-clocks = <&si5341 0 7>, <&si5341 1 3>; + assigned-clock-parents = <&si5341 1 3>; + /* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */ + assigned-clock-rates = <148500000>, <594000000>; +}; + +some-audio-node { + clock-names = "i2s-clk"; + clocks = <&si5341 0 0>; + /* + * since output 0 is a synth-master, the synth will be automatically set + * to an appropriate frequency when the audio driver requests another + * frequency. We give control over synth 2 to this output here. + */ + assigned-clocks = <&si5341 0 0>; + assigned-clock-parents = <&si5341 1 2>; +}; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt new file mode 100644 index 000000000..bfda6af76 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -0,0 +1,126 @@ +Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator. + +Reference +[1] Si5351A/B/C Data Sheet + https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf + +The Si5351a/b/c are programmable i2c clock generators with up to 8 output +clocks. Si5351a also has a reduced pin-count package (MSOP10) where only +3 output clocks are accessible. The internal structure of the clock +generators can be found in [1]. + +==I2C device node== + +Required properties: +- compatible: shall be one of the following: + "silabs,si5351a" - Si5351a, QFN20 package + "silabs,si5351a-msop" - Si5351a, MSOP10 package + "silabs,si5351b" - Si5351b, QFN20 package + "silabs,si5351c" - Si5351c, QFN20 package +- reg: i2c device address, shall be 0x60 or 0x61. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock + handles, shall be xtal reference clock or xtal and clkin for + si5351c only. Corresponding clock input names are "xtal" and + "clkin" respectively. +- #address-cells: shall be set to 1. +- #size-cells: shall be set to 0. + +Optional properties: +- silabs,pll-source: pair of (number, source) for each pll. Allows + to overwrite clock source of pll A (number=0) or B (number=1). + +==Child nodes== + +Each of the clock outputs can be overwritten individually by +using a child node to the I2C device node. If a child node for a clock +output is not set, the eeprom configuration is not overwritten. + +Required child node properties: +- reg: number of clock output. + +Optional child node properties: +- silabs,clock-source: source clock of the output divider stage N, shall be + 0 = multisynth N + 1 = multisynth 0 for output clocks 0-3, else multisynth4 + 2 = xtal + 3 = clkin (si5351c only) +- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}. +- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth + divider. +- silabs,pll-master: boolean, multisynth can change pll frequency. +- silabs,pll-reset: boolean, clock output can reset its pll. +- silabs,disable-state : clock output disable state, shall be + 0 = clock output is driven LOW when disabled + 1 = clock output is driven HIGH when disabled + 2 = clock output is FLOATING (HIGH-Z) when disabled + 3 = clock output is NEVER disabled + +==Example== + +/* 25MHz reference crystal */ +ref25: ref25M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; +}; + +i2c-master-node { + + /* Si5351a msop10 i2c clock generator */ + si5351a: clock-generator@60 { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* connect xtal input to 25MHz reference */ + clocks = <&ref25>; + clock-names = "xtal"; + + /* connect xtal input as source of pll0 and pll1 */ + silabs,pll-source = <0 0>, <1 0>; + + /* + * overwrite clkout0 configuration with: + * - 8mA output drive strength + * - pll0 as clock source of multisynth0 + * - multisynth0 as clock source of output divider + * - multisynth0 can change pll0 + * - set initial clock frequency of 74.25MHz + */ + clkout0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + clock-frequency = <74250000>; + }; + + /* + * overwrite clkout1 configuration with: + * - 4mA output drive strength + * - pll1 as clock source of multisynth1 + * - multisynth1 as clock source of output divider + * - multisynth1 can change pll1 + */ + clkout1 { + reg = <1>; + silabs,drive-strength = <4>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + pll-master; + }; + + /* + * overwrite clkout2 configuration with: + * - xtal as clock source of output divider + */ + clkout2 { + reg = <2>; + silabs,clock-source = <2>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.txt b/Documentation/devicetree/bindings/clock/silabs,si544.txt new file mode 100644 index 000000000..b86535b80 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si544.txt @@ -0,0 +1,25 @@ +Binding for Silicon Labs 544 programmable I2C clock generator. + +Reference +This binding uses the common clock binding[1]. Details about the device can be +found in the datasheet[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si544 datasheet + https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf + +Required properties: + - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according + to the speed grade of the chip. + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si544". + +Example: + si544: clock-controller@55 { + reg = <0x55>; + #clock-cells = <0>; + compatible = "silabs,si544b"; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt new file mode 100644 index 000000000..5dda17df1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt @@ -0,0 +1,41 @@ +Binding for Silicon Labs 570, 571, 598 and 599 programmable +I2C clock generators. + +Reference +This binding uses the common clock binding[1]. Details about the devices can be +found in the data sheets[2][3]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si570/571 Data Sheet + https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf +[3] Si598/599 Data Sheet + https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf + +Required properties: + - compatible: Shall be one of "silabs,si570", "silabs,si571", + "silabs,si598", "silabs,si599" + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + - factory-fout: Factory set default frequency. This frequency is part specific. + The correct frequency for the part used has to be provided in + order to generate the correct output frequencies. For more + details, please refer to the data sheet. + - temperature-stability: Temperature stability of the device in PPM. Should be + one of: 7, 20, 50 or 100. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si570". + - clock-frequency: Output frequency to generate. This defines the output + frequency set during boot. It can be reprogrammed during + runtime through the common clock framework. + - silabs,skip-recall: Do not perform NVM->RAM recall operation. It will rely + on hardware loading of RAM from NVM at power on. + +Example: + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + }; diff --git a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt new file mode 100644 index 000000000..c56c7553c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt @@ -0,0 +1,28 @@ +Binding for the HSDK Generic PLL clock + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: should be "snps,hsdk-<name>-pll-clock" + "snps,hsdk-core-pll-clock" + "snps,hsdk-gp-pll-clock" + "snps,hsdk-hdmi-pll-clock" +- reg : should contain base register location and length. +- clocks: shall be the input parent clock phandle for the PLL. +- #clock-cells: from common clock binding; Should always be set to 0. + +Example: + input_clk: input-clk { + clock-frequency = <33333333>; + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + cpu_clk: cpu-clk@0 { + compatible = "snps,hsdk-core-pll-clock"; + reg = <0x00 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + }; diff --git a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt new file mode 100644 index 000000000..11fe48766 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt @@ -0,0 +1,28 @@ +Binding for the AXS10X Generic PLL clock + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: should be "snps,axs10x-<name>-pll-clock" + "snps,axs10x-arc-pll-clock" + "snps,axs10x-pgu-pll-clock" +- reg: should always contain 2 pairs address - length: first for PLL config +registers and second for corresponding LOCK CGU register. +- clocks: shall be the input parent clock phandle for the PLL. +- #clock-cells: from common clock binding; Should always be set to 0. + +Example: + input-clk: input-clk { + clock-frequency = <33333333>; + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + core-clk: core-clk@80 { + compatible = "snps,axs10x-arc-pll-clock"; + reg = <0x80 0x10>, <0x100 0x10>; + #clock-cells = <0>; + clocks = <&input-clk>; + }; diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml new file mode 100644 index 000000000..9a0cc7341 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier clock controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + oneOf: + - description: System clock + enum: + - socionext,uniphier-ld4-clock + - socionext,uniphier-pro4-clock + - socionext,uniphier-sld8-clock + - socionext,uniphier-pro5-clock + - socionext,uniphier-pxs2-clock + - socionext,uniphier-ld6b-clock + - socionext,uniphier-ld11-clock + - socionext,uniphier-ld20-clock + - socionext,uniphier-pxs3-clock + - socionext,uniphier-nx1-clock + - description: Media I/O (MIO) clock, SD clock + enum: + - socionext,uniphier-ld4-mio-clock + - socionext,uniphier-pro4-mio-clock + - socionext,uniphier-sld8-mio-clock + - socionext,uniphier-pro5-sd-clock + - socionext,uniphier-pxs2-sd-clock + - socionext,uniphier-ld11-mio-clock + - socionext,uniphier-ld20-sd-clock + - socionext,uniphier-pxs3-sd-clock + - socionext,uniphier-nx1-sd-clock + - description: Peripheral clock + enum: + - socionext,uniphier-ld4-peri-clock + - socionext,uniphier-pro4-peri-clock + - socionext,uniphier-sld8-peri-clock + - socionext,uniphier-pro5-peri-clock + - socionext,uniphier-pxs2-peri-clock + - socionext,uniphier-ld11-peri-clock + - socionext,uniphier-ld20-peri-clock + - socionext,uniphier-pxs3-peri-clock + - socionext,uniphier-nx1-peri-clock + - description: SoC-glue clock + enum: + - socionext,uniphier-pro4-sg-clock + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + +examples: + - | + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + clock { + compatible = "socionext,uniphier-ld11-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + clock { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + clock { + compatible = "socionext,uniphier-ld11-peri-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt new file mode 100644 index 000000000..aaaf02ca2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt @@ -0,0 +1,63 @@ +Spreadtrum SC9860 Clock Binding +------------------------ + +Required properties: +- compatible: should contain the following compatible strings: + - "sprd,sc9860-pmu-gate" + - "sprd,sc9860-pll" + - "sprd,sc9860-ap-clk" + - "sprd,sc9860-aon-prediv" + - "sprd,sc9860-apahb-gate" + - "sprd,sc9860-aon-gate" + - "sprd,sc9860-aonsecure-clk" + - "sprd,sc9860-agcp-gate" + - "sprd,sc9860-gpu-clk" + - "sprd,sc9860-vsp-clk" + - "sprd,sc9860-vsp-gate" + - "sprd,sc9860-cam-clk" + - "sprd,sc9860-cam-gate" + - "sprd,sc9860-disp-clk" + - "sprd,sc9860-disp-gate" + - "sprd,sc9860-apapb-gate" + +- #clock-cells: must be 1 + +- clocks : Should be the input parent clock(s) phandle for the clock, this + property here just simply shows which clock group the clocks' + parents are in, since each clk node would represent many clocks + which are defined in the driver. The detailed dependency + relationship (i.e. how many parents and which are the parents) + are implemented in driver code. + +Optional properties: + +- reg: Contain the registers base address and length. It must be configured + only if no 'sprd,syscon' under the node. + +- sprd,syscon: phandle to the syscon which is in the same address area with + the clock, and so we can get regmap for the clocks from the + syscon device. + +Example: + + pmu_gate: pmu-gate { + compatible = "sprd,sc9860-pmu-gate"; + sprd,syscon = <&pmu_regs>; + clocks = <&ext_26m>; + #clock-cells = <1>; + }; + + pll: pll { + compatible = "sprd,sc9860-pll"; + sprd,syscon = <&ana_regs>; + clocks = <&pmu_gate 0>; + #clock-cells = <1>; + }; + + ap_clk: clock-controller@20000000 { + compatible = "sprd,sc9860-ap-clk"; + reg = <0 0x20000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, + <&pmu_gate 0>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml new file mode 100644 index 000000000..785a12797 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Unisoc Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: SC9863A Clock Control Unit + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - sprd,sc9863a-ap-clk + - sprd,sc9863a-aon-clk + - sprd,sc9863a-apahb-gate + - sprd,sc9863a-pmu-gate + - sprd,sc9863a-aonapb-gate + - sprd,sc9863a-pll + - sprd,sc9863a-mpll + - sprd,sc9863a-rpll + - sprd,sc9863a-dpll + - sprd,sc9863a-mm-gate + - sprd,sc9863a-mm-clk + - sprd,sc9863a-apapb-gate + + clocks: + minItems: 1 + maxItems: 4 + description: | + The input parent clock(s) phandle for this clock, only list fixed + clocks which are declared in devicetree. + + clock-names: + minItems: 1 + items: + - const: ext-26m + - const: ext-32k + - const: ext-4m + - const: rco-100m + + reg: + maxItems: 1 + +required: + - compatible + - '#clock-cells' + +if: + properties: + compatible: + enum: + - sprd,sc9863a-ap-clk + - sprd,sc9863a-aon-clk +then: + required: + - reg + +else: + description: | + Other SC9863a clock nodes should be the child of a syscon node in + which compatible string shoule be: + "sprd,sc9863a-glbregs", "syscon", "simple-mfd" + + The 'reg' property for the clock node is also required if there is a sub + range of registers for the clocks. + +additionalProperties: false + +examples: + - | + ap_clk: clock-controller@21500000 { + compatible = "sprd,sc9863a-ap-clk"; + reg = <0x21500000 0x1000>; + clocks = <&ext_26m>, <&ext_32k>; + clock-names = "ext-26m", "ext-32k"; + #clock-cells = <1>; + }; + + - | + syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0x20e00000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20e00000 0x4000>; + + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml new file mode 100644 index 000000000..5f747b047 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: UMS512 Soc clock controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,ums512-apahb-gate + - sprd,ums512-ap-clk + - sprd,ums512-aonapb-clk + - sprd,ums512-pmu-gate + - sprd,ums512-g0-pll + - sprd,ums512-g2-pll + - sprd,ums512-g3-pll + - sprd,ums512-gc-pll + - sprd,ums512-aon-gate + - sprd,ums512-audcpapb-gate + - sprd,ums512-audcpahb-gate + - sprd,ums512-gpu-clk + - sprd,ums512-mm-clk + - sprd,ums512-mm-gate-clk + - sprd,ums512-apapb-gate + + "#clock-cells": + const: 1 + + clocks: + minItems: 1 + maxItems: 4 + description: | + The input parent clock(s) phandle for the clock, only list + fixed clocks which are declared in devicetree. + + clock-names: + minItems: 1 + items: + - const: ext-26m + - const: ext-32k + - const: ext-4m + - const: rco-100m + + reg: + maxItems: 1 + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + ap_clk: clock-controller@20200000 { + compatible = "sprd,ums512-ap-clk"; + reg = <0x20200000 0x1000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt new file mode 100644 index 000000000..40e0cf1f7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt @@ -0,0 +1,104 @@ +ST Microelectronics Nomadik SRC System Reset and Control + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The Nomadik SRC controller is responsible of controlling chrystals, +PLLs and clock gates. + +Required properties for the SRC node: +- compatible: must be "stericsson,nomadik-src" +- reg: must contain the SRC register base and size + +Optional properties for the SRC node: +- disable-sxtalo: if present this will disable the SXTALO + i.e. the driver output for the slow 32kHz chrystal, if the + board has its own circuitry for providing this oscillator +- disable-mxtal: if present this will disable the MXTALO, + i.e. the driver output for the main (~19.2 MHz) chrystal, + if the board has its own circuitry for providing this + oscillator + + +PLL nodes: these nodes represent the two PLLs on the system, +which should both have the main chrystal, represented as a +fixed frequency clock, as parent. + +Required properties for the two PLL nodes: +- compatible: must be "st,nomadik-pll-clock" +- clock-cells: must be 0 +- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively +- clocks: this clock will have main chrystal as parent + + +HCLK nodes: these represent the clock gates on individual +lines from the HCLK clock tree and the gate for individual +lines from the PCLK clock tree. + +Requires properties for the HCLK nodes: +- compatible: must be "st,nomadik-hclk-clock" +- clock-cells: must be 0 +- clock-id: must be the clock ID from 0 to 63 according to + this table: + + 0: HCLKDMA0 + 1: HCLKSMC + 2: HCLKSDRAM + 3: HCLKDMA1 + 4: HCLKCLCD + 5: PCLKIRDA + 6: PCLKSSP + 7: PCLKUART0 + 8: PCLKSDI + 9: PCLKI2C0 + 10: PCLKI2C1 + 11: PCLKUART1 + 12: PCLMSP0 + 13: HCLKUSB + 14: HCLKDIF + 15: HCLKSAA + 16: HCLKSVA + 17: PCLKHSI + 18: PCLKXTI + 19: PCLKUART2 + 20: PCLKMSP1 + 21: PCLKMSP2 + 22: PCLKOWM + 23: HCLKHPI + 24: PCLKSKE + 25: PCLKHSEM + 26: HCLK3D + 27: HCLKHASH + 28: HCLKCRYP + 29: PCLKMSHC + 30: HCLKUSBM + 31: HCLKRNG + (32, 33, 34, 35 RESERVED) + 36: CLDCLK + 37: IRDACLK + 38: SSPICLK + 39: UART0CLK + 40: SDICLK + 41: I2C0CLK + 42: I2C1CLK + 43: UART1CLK + 44: MSPCLK0 + 45: USBCLK + 46: DIFCLK + 47: IPI2CCLK + 48: IPBMCCLK + 49: HSICLKRX + 50: HSICLKTX + 51: UART2CLK + 52: MSPCLK1 + 53: MSPCLK2 + 54: OWMCLK + (55 RESERVED) + 56: SKECLK + (57 RESERVED) + 58: 3DCLK + 59: PCLKMSP3 + 60: MSPCLK3 + 61: MSHCCLK + 62: USBMCLK + 63: RNGCCLK diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt new file mode 100644 index 000000000..cfa04b614 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -0,0 +1,138 @@ +STMicroelectronics STM32 Reset and Clock Controller +=================================================== + +The RCC IP is both a reset and a clock controller. + +Please refer to clock-bindings.txt for common clock controller binding usage. +Please also refer to reset.txt for common reset controller binding usage. + +Required properties: +- compatible: Should be: + "st,stm32f42xx-rcc" + "st,stm32f469-rcc" + "st,stm32f746-rcc" + "st,stm32f769-rcc" + +- reg: should be register base and length as documented in the + datasheet +- #reset-cells: 1, see below +- #clock-cells: 2, device nodes should specify the clock in their "clocks" + property, containing a phandle to the clock device node, an index selecting + between gated clocks and other clocks and an index specifying the clock to + use. +- clocks: External oscillator clock phandle + - high speed external clock signal (HSE) + - external I2S clock (I2S_CKIN) + +Example: + + rcc: rcc@40023800 { + #reset-cells = <1>; + #clock-cells = <2> + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + }; + +Specifying gated clocks +======================= + +The primary index must be set to 0. + +The secondary index is the bit number within the RCC register bank, starting +from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). + +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). + +To simplify the usage and to share bit definition with the reset and clock +drivers of the RCC IP, macros are available to generate the index in +human-readble format. + +For STM32F4 series, the macro are available here: + - include/dt-bindings/mfd/stm32f4-rcc.h + +Example: + + /* Gated clock, AHB1 bit 0 (GPIOA) */ + ... { + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)> + }; + + /* Gated clock, AHB2 bit 4 (CRYP) */ + ... { + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)> + }; + +Specifying other clocks +======================= + +The primary index must be set to 1. + +The secondary index is bound with the following magic numbers: + + 0 SYSTICK + 1 FCLK + 2 CLK_LSI (low-power clock source) + 3 CLK_LSE (generated from a 32.768 kHz low-speed external + crystal or ceramic resonator) + 4 CLK_HSE_RTC (HSE division factor for RTC clock) + 5 CLK_RTC (real-time clock) + 6 PLL_VCO_I2S (vco frequency of I2S pll) + 7 PLL_VCO_SAI (vco frequency of SAI pll) + 8 CLK_LCD (LCD-TFT) + 9 CLK_I2S (I2S clocks) + 10 CLK_SAI1 (audio clocks) + 11 CLK_SAI2 + 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor) + 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor) + + 14 CLK_HSI (Internal ocscillator clock) + 15 CLK_SYSCLK (System Clock) + 16 CLK_HDMI_CEC (HDMI-CEC clock) + 17 CLK_SPDIF (SPDIF-Rx clock) + 18 CLK_USART1 (U(s)arts clocks) + 19 CLK_USART2 + 20 CLK_USART3 + 21 CLK_UART4 + 22 CLK_UART5 + 23 CLK_USART6 + 24 CLK_UART7 + 25 CLK_UART8 + 26 CLK_I2C1 (I2S clocks) + 27 CLK_I2C2 + 28 CLK_I2C3 + 29 CLK_I2C4 + 30 CLK_LPTIMER (LPTimer1 clock) + 31 CLK_PLL_SRC + 32 CLK_DFSDM1 + 33 CLK_ADFSDM1 + 34 CLK_F769_DSI +) + +Example: + + /* Misc clock, FCLK */ + ... { + clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)> + }; + + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. +For example, for CRC reset: + crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 + +example: + + timer2 { + resets = <&rcc STM32F4_APB1_RESET(TIM2)>; + }; diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt new file mode 100644 index 000000000..cac24ee10 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt @@ -0,0 +1,71 @@ +STMicroelectronics STM32H7 Reset and Clock Controller +===================================================== + +The RCC IP is both a reset and a clock controller. + +Please refer to clock-bindings.txt for common clock controller binding usage. +Please also refer to reset.txt for common reset controller binding usage. + +Required properties: +- compatible: Should be: + "st,stm32h743-rcc" + +- reg: should be register base and length as documented in the + datasheet + +- #reset-cells: 1, see below + +- #clock-cells : from common clock binding; shall be set to 1 + +- clocks: External oscillator clock phandle + - high speed external clock signal (HSE) + - low speed external clock signal (LSE) + - external I2S clock (I2S_CKIN) + +Optional properties: +- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain + write protection (RTC clock). + +Example: + + rcc: reset-clock-controller@58024400 { + compatible = "st,stm32h743-rcc", "st,stm32-rcc"; + reg = <0x58024400 0x400>; + #reset-cells = <1>; + #clock-cells = <1>; + clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; + + st,syscfg = <&pwrcfg>; +}; + +The peripheral clock consumer should specify the desired clock by +having the clock ID in its "clocks" phandle cell. + +Example: + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&rcc TIM5_CK>; + }; + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. + +For example, for CRC reset: + crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107 + +Example: + + timer2 { + resets = <&rcc STM32H7_APB1L_RESET(TIM2)>; + }; diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml new file mode 100644 index 000000000..242fe922b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reset Clock Controller Binding + +maintainers: + - Gabriel Fernandez <gabriel.fernandez@foss.st.com> + +description: | + The RCC IP is both a reset and a clock controller. + RCC makes also power management (resume/supend and wakeup interrupt). + Please also refer to reset.txt for common reset controller binding usage. + + This binding uses common clock bindings + Documentation/devicetree/bindings/clock/clock-bindings.txt + + Specifying clocks + ================= + + All available clocks are defined as preprocessor macros in + dt-bindings/clock/stm32mp1-clks.h header and can be used in device + tree sources. + + Specifying softreset control of devices + ======================================= + + Device nodes should specify the reset channel required in their "resets" + property, containing a phandle to the reset device node and an index specifying + which channel to use. + The index is the bit number within the RCC registers bank, starting from RCC + base address. + It is calculated as: index = register_offset / 4 * 32 + bit_offset. + Where bit_offset is the bit offset within the register. + + For example on STM32MP1, for LTDC reset: + ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset + = 0x180 / 4 * 32 + 0 = 3072 + + The list of valid indices for STM32MP1 is available in: + include/dt-bindings/reset-controller/stm32mp1-resets.h + include/dt-bindings/reset-controller/stm32mp13-resets.h + + This file implements defines like: + #define LTDC_R 3072 + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + items: + - enum: + - st,stm32mp1-rcc-secure + - st,stm32mp1-rcc + - st,stm32mp13-rcc + - const: syscon + clocks: true + clock-names: true + + reg: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - st,stm32mp1-rcc-secure + - st,stm32mp13-rcc +then: + properties: + clocks: + description: Specifies oscillators. + maxItems: 5 + + clock-names: + items: + - const: hse + - const: hsi + - const: csi + - const: lse + - const: lsi + required: + - clocks + - clock-names +else: + properties: + clocks: + description: + Specifies the external RX clock for ethernet MAC. + maxItems: 1 + + clock-names: + const: ETH_RX_CLK/ETH_REF_CLK + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + rcc: rcc@50000000 { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt new file mode 100644 index 000000000..9a46cb1d7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt @@ -0,0 +1,32 @@ +Binding for a ST multiplexed clock driver. + +This binding supports only simple indexed multiplexers, it does not +support table based parent index to hardware value translations. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: + +- compatible : shall be: + "st,stih407-clkgen-a9-mux" + +- #clock-cells : from common clock binding; shall be set to 0. + +- reg : A Base address and length of the register set. + +- clocks : from common clock binding + +Example: + + clk_m_a9: clk-m-a9@92b0000 { + #clock-cells = <0>; + compatible = "st,stih407-clkgen-a9-mux"; + reg = <0x92b0000 0x10000>; + + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_s_c0_flexgen 13>, + <&clk_m_a9_ext2f_div2>; + }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt new file mode 100644 index 000000000..d0fa1e02d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -0,0 +1,40 @@ +Binding for a ST pll clock driver. + +This binding uses the common clock binding[1]. +Base address is located to the parent node. See clock binding[2] + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt + +Required properties: + +- compatible : shall be: + "st,clkgen-pll0" + "st,clkgen-pll0-a0" + "st,clkgen-pll0-c0" + "st,clkgen-pll1" + "st,clkgen-pll1-c0" + "st,stih407-clkgen-plla9" + "st,stih418-clkgen-plla9" + +- #clock-cells : From common clock binding; shall be set to 1. + +- clocks : From common clock binding + +- clock-output-names : From common clock binding. + +Example: + + clockgen-a9@92b0000 { + compatible = "st,clkgen-c32"; + reg = <0x92b0000 0xffff>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih407-clkgen-plla9"; + + clocks = <&clk_sysin>; + + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt new file mode 100644 index 000000000..45ac19bfa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -0,0 +1,68 @@ +Binding for a Clockgen hardware block found on +certain STMicroelectronics consumer electronics SoC devices. + +A Clockgen node can contain pll, diviser or multiplexer nodes. + +We will find only the base address of the Clockgen, this base +address is common of all subnode. + + clockgen_node { + reg = <>; + + pll_node { + ... + }; + + quadfs_node { + ... + }; + + mux_node { + ... + }; + + flexgen_node { + ... + }; + ... + }; + +This binding uses the common clock binding[1]. +Each subnode should use the binding described in [2]..[7] + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt + + +Required properties: +- reg : A Base address and length of the register set. + +Example: + + clockgen-a@90ff000 { + compatible = "st,clkgen-c32"; + reg = <0x90ff000 0x1000>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgen-pll0"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll-ofd-0"; + }; + + clk_s_a0_flexgen: clk-s-a0-flexgen { + compatible = "st,flexgen"; + + #clock-cells = <1>; + + clocks = <&clk_s_a0_pll 0>, + <&clk_sysin>; + + clock-output-names = "clk-ic-lmi0"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt new file mode 100644 index 000000000..c91807540 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt @@ -0,0 +1,133 @@ +Binding for a type of flexgen structure found on certain +STMicroelectronics consumer electronics SoC devices + +This structure includes: +- a clock cross bar (represented by a mux element) +- a pre and final dividers (represented by a divider and gate elements) + +Flexgen structure is a part of Clockgen[1]. + +Please find an example below: + + Clockgen block diagram + ------------------------------------------------------------------- + | Flexgen structure | + | --------------------------------------------- | + | | ------- -------- -------- | | +clk_sysin | | | | | | | | | +---|-----------------|-->| | | | | | | | + | | | | | | | | | | | + | | ------- | | | |Pre | |Final | | | + | | |PLL0 | | | | |Dividers| |Dividers| | | + | |->| | | | | | x32 | | x32 | | | + | | | odf_0|----|-->| | | | | | | | + | | | | | | | | | | | | | + | | | | | | | | | | | | | + | | | | | | | | | | | | | + | | | | | | | | | | | | | + | | ------- | | | | | | | | | + | | | | | | | | | | | + | | ------- | | Clock | | | | | | | + | | |PLL1 | | | | | | | | | | + | |->| | | | Cross | | | | | | | + | | | odf_0|----|-->| | | | | | CLK_DIV[31:0] + | | | | | | Bar |====>| |====>| |===|=========> + | | | | | | | | | | | | | + | | | | | | | | | | | | | + | | | | | | | | | | | | | + | | ------- | | | | | | | | | + | | | | | | | | | | | + | | ------- | | | | | | | | | + | | |QUADFS | | | | | | | | | | + | |->| ch0|----|-->| | | | | | | | + | | | | | | | | | | | | + | | ch1|----|-->| | | | | | | | + | | | | | | | | | | | | + | | ch2|----|-->| | | DIV | | DIV | | | + | | | | | | | 1 to | | 1 to | | | + | | ch3|----|-->| | | 1024 | | 64 | | | + | ------- | | | | | | | | | + | | ------- -------- -------- | | + | -------------------------------------------- | + | | + ------------------------------------------------------------------- + +This binding uses the common clock binding[2]. + +[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt +[2] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be: + "st,flexgen" + "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for + audio use case) + "st,flexgen-video", "st,flexgen" (enable clock propagation on parent + and activate synchronous mode) + "st,flexgen-stih407-a0" + "st,flexgen-stih410-a0" + "st,flexgen-stih407-c0" + "st,flexgen-stih410-c0" + "st,flexgen-stih418-c0" + "st,flexgen-stih407-d0" + "st,flexgen-stih410-d0" + "st,flexgen-stih407-d2" + "st,flexgen-stih418-d2" + "st,flexgen-stih407-d3" + +- #clock-cells : from common clock binding; shall be set to 1 (multiple clock + outputs). + +- clocks : must be set to the parent's phandle. it could be output clocks of + a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks) + +- clock-output-names : List of strings used to name the clock outputs. + +Example: + + clk_s_c0_flexgen: clk-s-c0-flexgen { + + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_c0_pll0 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_quadfs 0>, + <&clk_s_c0_quadfs 1>, + <&clk_s_c0_quadfs 2>, + <&clk_s_c0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-icn-gpu", + "clk-fdma", + "clk-nand", + "clk-hva", + "clk-proc-stfe", + "clk-proc-tp", + "clk-rx-icn-dmu", + "clk-rx-icn-hva", + "clk-icn-cpu", + "clk-tx-icn-dmu", + "clk-mmc-0", + "clk-mmc-1", + "clk-jpegdec", + "clk-ext2fa9", + "clk-ic-bdisp-0", + "clk-ic-bdisp-1", + "clk-pp-dmu", + "clk-vid-dmu", + "clk-dss-lpc", + "clk-st231-aud-0", + "clk-st231-gp-1", + "clk-st231-dmu", + "clk-icn-lmi", + "clk-tx-icn-disp-1", + "clk-icn-sbc", + "clk-stfe-frc2", + "clk-eth-phy", + "clk-eth-ref-phyclk", + "clk-flash-promip", + "clk-main-disp", + "clk-aux-disp", + "clk-compo-dvp"; + }; diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt new file mode 100644 index 000000000..c4ba2adb0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt @@ -0,0 +1,48 @@ +Binding for a type of quad channel digital frequency synthesizer found on +certain STMicroelectronics consumer electronics SoC devices. + +This version contains a programmable PLL which can generate up to 216, 432 +or 660MHz (from a 30MHz oscillator input) as the input to the digital +synthesizers. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be: + "st,quadfs" + "st,quadfs-d0" + "st,quadfs-d2" + "st,quadfs-d3" + "st,quadfs-pll" + + +- #clock-cells : from common clock binding; shall be set to 1. + +- reg : A Base address and length of the register set. + +- clocks : from common clock binding + +- clock-output-names : From common clock binding. The block has 4 + clock outputs but not all of them in a specific instance + have to be used in the SoC. If a clock name is left as + an empty string then no clock will be created for the + output associated with that string index. If fewer than + 4 strings are provided then no clocks will be created + for the remaining outputs. + +Example: + + clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 { + #clock-cells = <1>; + compatible = "st,quadfs-pll"; + reg = <0x9103000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-fs0-ch0", + "clk-s-c0-fs0-ch1", + "clk-s-c0-fs0-ch2", + "clk-s-c0-fs0-ch3"; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml new file mode 100644 index 000000000..8f49a1ae0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7100 Audio Clock Generator + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + +properties: + compatible: + const: starfive,jh7100-audclk + + reg: + maxItems: 1 + + clocks: + items: + - description: Audio source clock + - description: External 12.288MHz clock + - description: Domain 7 AHB bus clock + + clock-names: + items: + - const: audio_src + - const: audio_12288 + - const: dom7ahb_bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive-jh7100.h> + + clock-controller@10480000 { + compatible = "starfive,jh7100-audclk"; + reg = <0x10480000 0x10000>; + clocks = <&clkgen JH7100_CLK_AUDIO_SRC>, + <&clkgen JH7100_CLK_AUDIO_12288>, + <&clkgen JH7100_CLK_DOM7AHB_BUS>; + clock-names = "audio_src", "audio_12288", "dom7ahb_bus"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml new file mode 100644 index 000000000..12f17b60e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7100 Clock Generator + +maintainers: + - Geert Uytterhoeven <geert@linux-m68k.org> + - Emil Renner Berthing <kernel@esmil.dk> + +properties: + compatible: + const: starfive,jh7100-clkgen + + reg: + maxItems: 1 + + clocks: + items: + - description: Main clock source (25 MHz) + - description: Application-specific clock source (12-27 MHz) + - description: RMII reference clock (50 MHz) + - description: RGMII RX clock (125 MHz) + + clock-names: + items: + - const: osc_sys + - const: osc_aud + - const: gmac_rmii_ref + - const: gmac_gr_mii_rxclk + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive-jh7100.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@11800000 { + compatible = "starfive,jh7100-clkgen"; + reg = <0x11800000 0x10000>; + clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>; + clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt new file mode 100644 index 000000000..dbaa886b2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt @@ -0,0 +1,20 @@ +Clock bindings for ST-Ericsson ABx500 clocks + +Required properties : +- compatible : shall contain the following: + "stericsson,ab8500-clk" +- #clock-cells should be <1> + +The ABx500 clocks need to be placed as a subnode of an AB8500 +device node, see mfd/ab8500.txt + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/ste-ab8500.h header and can be used in device +tree sources. + +Example: + +clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml new file mode 100644 index 000000000..215030721 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson DB8500 (U8500) clocks + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + - Linus Walleij <linus.walleij@linaro.org> + +description: While named "U8500 clocks" these clocks are inside the + DB8500 digital baseband system-on-chip and its siblings such as + DB8520. These bindings consider the clocks present in the SoC + itself, not off-chip clocks. There are four different on-chip + clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and + control management unit) clocks and PRCC (peripheral reset and + clock controller) clocks. For some reason PRCC 4 does not exist so + the itemization can be a bit unintuitive. + +properties: + compatible: + enum: + - stericsson,u8500-clks + - stericsson,u8540-clks + - stericsson,u9540-clks + + reg: + items: + - description: PRCC 1 register area + - description: PRCC 2 register area + - description: PRCC 3 register area + - description: PRCC 5 register area + - description: PRCC 6 register area + + prcmu-clock: + description: A subnode with one clock cell for PRCMU (power, reset, control + management unit) clocks. The cell indicates which PRCMU clock in the + prcmu-clock node the consumer wants to use. + type: object + + properties: + '#clock-cells': + const: 1 + + additionalProperties: false + + prcc-periph-clock: + description: A subnode with two clock cells for PRCC (peripheral + reset and clock controller) peripheral clocks. The first cell indicates + which PRCC block the consumer wants to use, possible values are 1, 2, 3, + 5, 6. The second cell indicates which clock inside the PRCC block it + wants, possible values are 0 thru 31. + type: object + + properties: + '#clock-cells': + const: 2 + + additionalProperties: false + + prcc-kernel-clock: + description: A subnode with two clock cells for PRCC (peripheral reset + and clock controller) kernel clocks. The first cell indicates which PRCC + block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The + second cell indicates which clock inside the PRCC block it wants, possible + values are 0 thru 31. + type: object + + properties: + '#clock-cells': + const: 2 + + additionalProperties: false + + prcc-reset-controller: + description: A subnode with two reset cells for the reset portions of the + PRCC (peripheral reset and clock controller). The first cell indicates + which PRCC block the consumer wants to use, possible values are 1, 2, 3 + 5 and 6. The second cell indicates which reset line inside the PRCC block + it wants to control, possible values are 0 thru 31. + type: object + + properties: + '#reset-cells': + const: 2 + + additionalProperties: false + + rtc32k-clock: + description: A subnode with zero clock cells for the 32kHz RTC clock. + type: object + + properties: + '#clock-cells': + const: 0 + + additionalProperties: false + + smp-twd-clock: + description: A subnode for the ARM SMP Timer Watchdog cluster with zero + clock cells. + type: object + + properties: + '#clock-cells': + const: 0 + + additionalProperties: false + + clkout-clock: + description: A subnode with three clock cells for externally routed clocks, + output clocks. These are two PRCMU-internal clocks that can be divided and + muxed out on the pads of the DB8500 SoC. + type: object + + properties: + '#clock-cells': + description: + The first cell indicates which output clock we are using, + possible values are 0 (CLKOUT1) and 1 (CLKOUT2). + The second cell indicates which clock we want to use as source, + possible values are 0 thru 7, see the defines for the different + source clocks. + The third cell is a divider, legal values are 1 thru 63. + const: 3 + + additionalProperties: false + +required: + - compatible + - reg + - prcmu-clock + - prcc-periph-clock + - prcc-kernel-clock + - rtc32k-clock + - smp-twd-clock + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ste-db8500-clkout.h> + clocks@8012 { + compatible = "stericsson,u8500-clks"; + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + prcc_reset: prcc-reset-controller { + #reset-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + + clkout_clk: clkout-clock { + #clock-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml new file mode 100644 index 000000000..bcc140882 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 SoC Clock Controller + +maintainers: + - Qin Jian <qinjian@cqplus1.com> + +properties: + compatible: + const: sunplus,sp7021-clkc + + reg: + maxItems: 3 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + extclk: osc0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "extclk"; + }; + + clkc: clock-controller@9c000004 { + compatible = "sunplus,sp7021-clkc"; + reg = <0x9c000004 0x28>, + <0x9c000200 0x44>, + <0x9c000268 0x08>; + clocks = <&extclk>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml new file mode 100644 index 000000000..dc808e2f8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tesla FSD (Full Self-Driving) SoC clock controller + +maintainers: + - Alim Akhtar <alim.akhtar@samsung.com> + - linux-fsd@tesla.com + +description: | + FSD clock controller consist of several clock management unit + (CMU), which generates clocks for various inteernal SoC blocks. + The root clock comes from external OSC clock (24 MHz). + + All available clocks are defined as preprocessor macros in + 'dt-bindings/clock/fsd-clk.h' header. + +properties: + compatible: + enum: + - tesla,fsd-clock-cmu + - tesla,fsd-clock-imem + - tesla,fsd-clock-peric + - tesla,fsd-clock-fsys0 + - tesla,fsd-clock-fsys1 + - tesla,fsd-clock-mfc + - tesla,fsd-clock-cam_csi + + clocks: + minItems: 1 + maxItems: 6 + + clock-names: + minItems: 1 + maxItems: 6 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-cmu + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + clock-names: + items: + - const: fin_pll + + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-imem + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + - description: IMEM TCU clock (from CMU_CMU) + - description: IMEM bus clock (from CMU_CMU) + - description: IMEM DMA clock (from CMU_CMU) + clock-names: + items: + - const: fin_pll + - const: dout_cmu_imem_tcuclk + - const: dout_cmu_imem_aclk + - const: dout_cmu_imem_dmaclk + + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-peric + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + - description: Shared0 PLL div4 clock (from CMU_CMU) + - description: PERIC shared1 div36 clock (from CMU_CMU) + - description: PERIC shared0 div3 TBU clock (from CMU_CMU) + - description: PERIC shared0 div20 clock (from CMU_CMU) + - description: PERIC shared1 div4 DMAclock (from CMU_CMU) + clock-names: + items: + - const: fin_pll + - const: dout_cmu_pll_shared0_div4 + - const: dout_cmu_peric_shared1div36 + - const: dout_cmu_peric_shared0div3_tbuclk + - const: dout_cmu_peric_shared0div20 + - const: dout_cmu_peric_shared1div4_dmaclk + + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-fsys0 + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + - description: Shared0 PLL div6 clock (from CMU_CMU) + - description: FSYS0 shared1 div4 clock (from CMU_CMU) + - description: FSYS0 shared0 div4 clock (from CMU_CMU) + clock-names: + items: + - const: fin_pll + - const: dout_cmu_pll_shared0_div6 + - const: dout_cmu_fsys0_shared1div4 + - const: dout_cmu_fsys0_shared0div4 + + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-fsys1 + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + - description: FSYS1 shared0 div8 clock (from CMU_CMU) + - description: FSYS1 shared0 div4 clock (from CMU_CMU) + clock-names: + items: + - const: fin_pll + - const: dout_cmu_fsys1_shared0div8 + - const: dout_cmu_fsys1_shared0div4 + + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-mfc + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + clock-names: + items: + - const: fin_pll + + - if: + properties: + compatible: + contains: + const: tesla,fsd-clock-cam_csi + then: + properties: + clocks: + items: + - description: External reference clock (24 MHz) + clock-names: + items: + - const: fin_pll + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_FSYS1 + - | + #include <dt-bindings/clock/fsd-clk.h> + + clock_fsys1: clock-controller@16810000 { + compatible = "tesla,fsd-clock-fsys1"; + reg = <0x16810000 0x3000>; + #clock-cells = <1>; + + clocks = <&fin_pll>, + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>, + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>; + clock-names = "fin_pll", + "dout_cmu_fsys1_shared0div8", + "dout_cmu_fsys1_shared0div4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml new file mode 100644 index 000000000..66765116a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI EHRPWM Time Base Clock + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +properties: + compatible: + items: + - enum: + - ti,am654-ehrpwm-tbclk + - ti,am64-epwm-tbclk + - ti,am62-epwm-tbclk + - const: syscon + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + ehrpwm_tbclk: syscon@4140 { + compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + reg = <0x4140 0x18>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt new file mode 100644 index 000000000..21c3ff764 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt @@ -0,0 +1,42 @@ +Bindings for Texas Instruments CDCE706 programmable 3-PLL clock +synthesizer/multiplier/divider. + +Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf + +I2C device node required properties: +- compatible: shall be "ti,cdce706". +- reg: i2c device address, shall be in range [0x68...0x6b]. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock + handles, shall be reference clock(s) connected to CLK_IN0 + and CLK_IN1 pins. +- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0 + in case of crystal oscillator or differential signal input + configuration. Use clk_in0 and clk_in1 in case of independent + single-ended LVCMOS inputs configuration. + +Example: + + clocks { + clk54: clk54 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + }; + }; + ... + i2c0: i2c-master@d090000 { + ... + cdce706: clock-synth@69 { + compatible = "ti,cdce706"; + #clock-cells = <1>; + reg = <0x69>; + clocks = <&clk54>; + clock-names = "clk_in0"; + }; + }; + ... + simple-audio-card,codec { + ... + clocks = <&cdce706 4>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt new file mode 100644 index 000000000..df42ab727 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -0,0 +1,53 @@ +Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers. + +Reference +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] https://www.ti.com/product/cdce913 +[3] https://www.ti.com/product/cdce925 +[4] https://www.ti.com/product/cdce937 +[5] https://www.ti.com/product/cdce949 + +The driver provides clock sources for each output Y1 through Y5. + +Required properties: + - compatible: Shall be one of the following: + - "ti,cdce913": 1-PLL, 3 Outputs + - "ti,cdce925": 2-PLL, 5 Outputs + - "ti,cdce937": 3-PLL, 7 Outputs + - "ti,cdce949": 4-PLL, 9 Outputs + - reg: I2C device address. + - clocks: Points to a fixed parent clock that provides the input frequency. + - #clock-cells: From common clock bindings: Shall be 1. + +Optional properties: + - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a + board, or to compensate for external influences. +- vdd-supply: A regulator node for Vdd +- vddout-supply: A regulator node for Vddout + +For all PLL1, PLL2, ... an optional child node can be used to specify spread +spectrum clocking parameters for a board. + - spread-spectrum: SSC mode as defined in the data sheet. + - spread-spectrum-center: Use "centered" mode instead of "max" mode. When + present, the clock runs at the requested frequency on average. Otherwise + the requested frequency is the maximum value of the SCC range. + + +Example: + + clockgen: cdce925pw@64 { + compatible = "cdce925"; + reg = <0x64>; + clocks = <&xtal_27Mhz>; + #clock-cells = <1>; + xtal-load-pf = <5>; + vdd-supply = <&1v8-reg>; + vddout-supply = <&3v3-reg>; + /* PLL options to get SSC 1% centered */ + PLL2 { + spread-spectrum = <4>; + spread-spectrum-center; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml new file mode 100644 index 000000000..bd8173848 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml @@ -0,0 +1,209 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for the Texas Instruments LMK04832 + +maintainers: + - Liam Beguin <liambeguin@gmail.com> + +description: | + Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B + support. The LMK04832 is pin compatible with the LMK0482x family. + + Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf + +properties: + compatible: + enum: + - ti,lmk04832 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 1 + + spi-max-frequency: + maximum: 5000000 + + clocks: + items: + - description: PLL2 reference clock. + + clock-names: + items: + - const: oscin + + reset-gpios: + maxItems: 1 + + ti,spi-4wire-rdbk: + description: | + Select SPI 4wire readback pin configuration. + Available readback pins are, + CLKin_SEL0 0 + CLKin_SEL1 1 + RESET 2 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + ti,vco-hz: + description: Optional to set VCO frequency of the PLL in Hertz. + + ti,sysref-ddly: + description: SYSREF digital delay value. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 8 + maximum: 8191 + default: 8 + + ti,sysref-mux: + description: | + SYSREF Mux configuration. + Available options are, + Normal SYNC 0 + Re-clocked 1 + SYSREF Pulser 2 + SYSREF Continuous 3 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 + + ti,sync-mode: + description: SYNC pin configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + ti,sysref-pulse-count: + description: + Number of SYSREF pulses to send when SYSREF is not in continuous mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 4 + +patternProperties: + "@[0-9a-d]+$": + type: object + description: + Child nodes used to configure output clocks. + + properties: + reg: + description: + clock output identifier. + minimum: 0 + maximum: 13 + + ti,clkout-fmt: + description: + Clock output format. + Available options are, + Powerdown 0x00 + LVDS 0x01 + HSDS 6 mA 0x02 + HSDS 8 mA 0x03 + LVPECL 1600 mV 0x04 + LVPECL 2000 mV 0x05 + LCPECL 0x06 + CML 16 mA 0x07 + CML 24 mA 0x08 + CML 32 mA 0x09 + CMOS (Off/Inverted) 0x0a + CMOS (Normal/Off) 0x0b + CMOS (Inverted/Inverted) 0x0c + CMOS (Inverted/Normal) 0x0d + CMOS (Normal/Inverted) 0x0e + CMOS (Normal/Normal) 0x0f + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + ti,clkout-sysref: + description: + Select SYSREF clock path for output clock. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clocks { + lmk04832_oscin: oscin { + compatible = "fixed-clock"; + + #clock-cells = <0>; + clock-frequency = <122880000>; + clock-output-names = "lmk04832-oscin"; + }; + }; + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + lmk04832: clock-controller@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + compatible = "ti,lmk04832"; + spi-max-frequency = <781250>; + + reset-gpios = <&gpio_lmk 0 0 0>; + + #clock-cells = <1>; + clocks = <&lmk04832_oscin>; + clock-names = "oscin"; + + ti,spi-4wire-rdbk = <0>; + ti,vco-hz = <2457600000>; + + assigned-clocks = + <&lmk04832 0>, <&lmk04832 1>, + <&lmk04832 2>, <&lmk04832 3>, + <&lmk04832 4>, + <&lmk04832 6>, <&lmk04832 7>, + <&lmk04832 10>, <&lmk04832 11>; + assigned-clock-rates = + <122880000>, <384000>, + <122880000>, <384000>, + <122880000>, + <153600000>, <384000>, + <614400000>, <384000>; + + clkout0@0 { + reg = <0>; + ti,clkout-fmt = <0x01>; // LVDS + }; + + clkout1@1 { + reg = <1>; + ti,clkout-fmt = <0x01>; // LVDS + ti,clkout-sysref; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml new file mode 100644 index 000000000..0e370289a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI clock controller node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This clock controller node uses the TI SCI protocol to perform various clock + management of various hardware modules (devices) present on the SoC. This + node must be a child node of the associated TI-SCI system controller node. + +properties: + $nodename: + pattern: "^clock-controller$" + + compatible: + const: ti,k2g-sci-clk + + "#clock-cells": + const: 2 + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell should contain the clock ID. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt new file mode 100644 index 000000000..d20db7974 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt @@ -0,0 +1,63 @@ +Texas Instruments clkctrl clock binding + +Texas Instruments SoCs can have a clkctrl clock controller for each +interconnect target module. The clkctrl clock controller manages functional +and interface clocks for each module. Each clkctrl controller can also +gate one or more optional functional clocks for a module, and can have one +or more clock muxes. There is a clkctrl clock controller typically for each +interconnect target module on omap4 and later variants. + +The clock consumers can specify the index of the clkctrl clock using +the hardware offset from the clkctrl instance register space. The optional +clocks can be specified by clkctrl hardware offset and the index of the +optional clock. + +For more information, please see the Linux clock framework binding at +Documentation/devicetree/bindings/clock/clock-bindings.txt. + +Required properties : +- compatible : shall be "ti,clkctrl" or a clock domain specific name: + "ti,clkctrl-l4-cfg" + "ti,clkctrl-l4-per" + "ti,clkctrl-l4-secure" + "ti,clkctrl-l4-wkup" +- clock-output-names : from common clock binding +- #clock-cells : shall contain 2 with the first entry being the instance + offset from the clock domain base and the second being the + clock index +- reg : clock registers + +Example: Clock controller node on omap 4430: + +&cm2 { + l4per: cm@1400 { + cm_l4per@0 { + cm_l4per_clkctrl: clock@20 { + compatible = "ti,clkctrl"; + clock-output-names = "l4_per"; + reg = <0x20 0x1b0>; + #clock-cells = <2>; + }; + }; + }; +}; + +Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h + +#define OMAP4_CLKCTRL_OFFSET 0x20 +#define OMAP4_CLKCTRL_INDEX(offset) ((offset) - OMAP4_CLKCTRL_OFFSET) +#define MODULEMODE_HWCTRL 1 +#define MODULEMODE_SWCTRL 2 + +#define OMAP4_GPTIMER10_CLKTRL OMAP4_CLKCTRL_INDEX(0x28) +#define OMAP4_GPTIMER11_CLKTRL OMAP4_CLKCTRL_INDEX(0x30) +#define OMAP4_GPTIMER2_CLKTRL OMAP4_CLKCTRL_INDEX(0x38) +... +#define OMAP4_GPIO2_CLKCTRL OMAP_CLKCTRL_INDEX(0x60) + +Example: Clock consumer node for GPIO2: + +&gpio2 { + clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0 + &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt new file mode 100644 index 000000000..c35cb6c4a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt @@ -0,0 +1,20 @@ +* Device tree bindings for Texas Instruments keystone pll controller + +The main pll controller used to drive theC66x CorePacs, the switch fabric, +and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and +the NETCP modules) requires a PLL Controller to manage the various clock +divisions, gating, and synchronization. + +Required properties: + +- compatible: "ti,keystone-pllctrl", "syscon" + +- reg: contains offset/length value for pll controller + registers space. + +Example: + +pllctrl: pll-controller@02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt new file mode 100644 index 000000000..4c8a2ce2c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt @@ -0,0 +1,41 @@ +Binding for Texas Instruments ADPLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped ADPLL with two to three selectable input clocks +and three to four children. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of "ti,dm814-adpll-s-clock" or + "ti,dm814-adpll-lj-clock" depending on the type of the ADPLL +- #clock-cells : from common clock binding; shall be set to 1. +- clocks : link phandles of parent clocks clkinp and clkinpulow, note + that the adpll-s-clock also has an optional clkinphif +- reg : address and length of the register set for controlling the ADPLL. + +Examples: + adpll_mpu_ck: adpll@40 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-s-clock"; + reg = <0x40 0x40>; + clocks = <&devosc_ck &devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow", "clkinphif"; + clock-output-names = "481c5040.adpll.dcoclkldo", + "481c5040.adpll.clkout", + "481c5040.adpll.clkoutx2", + "481c5040.adpll.clkouthif"; + }; + + adpll_dsp_ck: adpll@80 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x80 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5080.adpll.dcoclkldo", + "481c5080.adpll.clkout", + "481c5080.adpll.clkoutldo"; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt new file mode 100644 index 000000000..ade4dd4c3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -0,0 +1,45 @@ +Binding for Texas Instruments APLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped APLL with usually two selectable input clocks +(reference clock and bypass clock), with analog phase locked +loop logic for multiplying the input clock to a desired output +clock. This clock also typically supports different operation +modes (locked, low power stop etc.) APLL mostly behaves like +a subtype of a DPLL [2], although a simplified one at that. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/dpll.txt + +Required properties: +- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks (clk-ref and clk-bypass) +- reg : address and length of the register set for controlling the APLL. + It contains the information of registers in the following order: + "control" - contains the control register offset + "idlest" - contains the idlest register offset + "autoidle" - contains the autoidle register offset (OMAP2 only) +- ti,clock-frequency : static clock frequency for the clock (OMAP2 only) +- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only) +- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only) + +Examples: + apll_pcie_ck: apll_pcie_ck { + #clock-cells = <0>; + clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; + reg = <0x021c>, <0x0220>; + compatible = "ti,dra7-apll-clock"; + }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt new file mode 100644 index 000000000..7c735dde9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt @@ -0,0 +1,39 @@ +Binding for Texas Instruments autoidle clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a register mapped +clock which can be put to idle automatically by hardware based on the usage +and a configuration bit setting. Autoidle clock is never an individual +clock, it is always a derivative of some basic clock like a gate, divider, +or fixed-factor. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- reg : offset for the register controlling the autoidle +- ti,autoidle-shift : bit shift of the autoidle enable bit +- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0 + +Examples: + dpll_core_m4_ck: dpll_core_m4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x2d38>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x01b4>; + ti,clock-mult = <1>; + ti,invert-autoidle-bit; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt new file mode 100644 index 000000000..9c6199249 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -0,0 +1,27 @@ +Binding for Texas Instruments clockdomain. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1] in consumer role. +Every clock on TI SoC belongs to one clockdomain, but software +only needs this information for specific clocks which require +their parent clockdomain to be controlled when the clock is +enabled/disabled. This binding doesn't define a new clock +binding type, it is used to group existing clock nodes under +hardware hierarchy. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,clockdomain" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of clocks within this domain + +Optional properties: +- clock-output-names : from common clock binding. + +Examples: + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt new file mode 100644 index 000000000..33ac7c9ad --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -0,0 +1,57 @@ +Binding for TI composite clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped composite clock with multiple different sub-types; + +a multiplexer clock with multiple input clock signals or parents, one +of which can be selected as output, this behaves exactly as [2] + +an adjustable clock rate divider, this behaves exactly as [3] + +a gating function which can be used to enable and disable the output +clock, this behaves exactly as [4] + +The binding must provide a list of the component clocks that shall be +merged to this clock. The component clocks shall be of one of the +"ti,*composite*-clock" types. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/mux.txt +[3] Documentation/devicetree/bindings/clock/ti/divider.txt +[4] Documentation/devicetree/bindings/clock/ti/gate.txt + +Required properties: +- compatible : shall be: "ti,composite-clock" +- clocks : link phandles of component clocks +- #clock-cells : from common clock binding; shall be set to 0. + +Optional properties: +- clock-output-names : from common clock binding. + +Examples: + +usb_l4_gate_ick: usb_l4_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + reg = <0x0a10>; +}; + +usb_l4_div_ick: usb_l4_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + reg = <0x0a40>; + ti,index-starts-at-one; +}; + +usb_l4_ick: usb_l4_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt new file mode 100644 index 000000000..1e03dce99 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt @@ -0,0 +1,93 @@ +Binding for TI DA8XX/OMAP-L13X/AM17XX/AM18XX CFGCHIP clocks + +TI DA8XX/OMAP-L13X/AM17XX/AM18XX SoCs contain a general purpose set of +registers call CFGCHIPn. Some of these registers function as clock +gates. This document describes the bindings for those clocks. + +All of the clock nodes described below must be child nodes of a CFGCHIP node +(compatible = "ti,da830-cfgchip"). + +USB PHY clocks +-------------- +Required properties: +- compatible: shall be "ti,da830-usb-phy-clocks". +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: phandles to the parent clocks corresponding to clock-names +- clock-names: shall be "fck", "usb_refclkin", "auxclk" + +This node provides two clocks. The clock at index 0 is the USB 2.0 PHY 48MHz +clock and the clock at index 1 is the USB 1.1 PHY 48MHz clock. + +eHRPWM Time Base Clock (TBCLK) +------------------------------ +Required properties: +- compatible: shall be "ti,da830-tbclksync". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandle to the parent clock +- clock-names: shall be "fck" + +PLL DIV4.5 divider +------------------ +Required properties: +- compatible: shall be "ti,da830-div4p5ena". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandle to the parent clock +- clock-names: shall be "pll0_pllout" + +EMIFA clock source (ASYNC1) +--------------------------- +Required properties: +- compatible: shall be "ti,da850-async1-clksrc". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandles to the parent clocks corresponding to clock-names +- clock-names: shall be "pll0_sysclk3", "div4.5" + +ASYNC3 clock source +------------------- +Required properties: +- compatible: shall be "ti,da850-async3-clksrc". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandles to the parent clocks corresponding to clock-names +- clock-names: shall be "pll0_sysclk2", "pll1_sysclk2" + +Examples: + + cfgchip: syscon@1417c { + compatible = "ti,da830-cfgchip", "syscon", "simple-mfd"; + reg = <0x1417c 0x14>; + + usb_phy_clk: usb-phy-clocks { + compatible = "ti,da830-usb-phy-clocks"; + #clock-cells = <1>; + clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>; + clock-names = "fck", "usb_refclkin", "auxclk"; + }; + ehrpwm_tbclk: ehrpwm_tbclk { + compatible = "ti,da830-tbclksync"; + #clock-cells = <0>; + clocks = <&psc1 17>; + clock-names = "fck"; + }; + div4p5_clk: div4.5 { + compatible = "ti,da830-div4p5ena"; + #clock-cells = <0>; + clocks = <&pll0_pllout>; + clock-names = "pll0_pllout"; + }; + async1_clk: async1 { + compatible = "ti,da850-async1-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 3>, <&div4p5_clk>; + clock-names = "pll0_sysclk3", "div4.5"; + }; + async3_clk: async3 { + compatible = "ti,da850-async3-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>; + clock-names = "pll0_sysclk2", "pll1_sysclk2"; + }; + }; + +Also see: +- Documentation/devicetree/bindings/clock/clock-bindings.txt + diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt new file mode 100644 index 000000000..c98945383 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt @@ -0,0 +1,96 @@ +Binding for TI DaVinci PLL Controllers + +The PLL provides clocks to most of the components on the SoC. In addition +to the PLL itself, this controller also contains bypasses, gates, dividers, +an multiplexers for various clock signals. + +Required properties: +- compatible: shall be one of: + - "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX + - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX +- reg: physical base address and size of the controller's register area. +- clocks: phandles corresponding to the clock names +- clock-names: names of the clock sources - depends on compatible string + - for "ti,da850-pll0", shall be "clksrc", "extclksrc" + - for "ti,da850-pll1", shall be "clksrc" + +Optional properties: +- ti,clkmode-square-wave: Indicates that the board is supplying a square + wave input on the OSCIN pin instead of using a crystal oscillator. + This property is only valid when compatible = "ti,da850-pll0". + + +Optional child nodes: + +pllout + Describes the main PLL clock output (before POSTDIV). The node name must + be "pllout". + + Required properties: + - #clock-cells: shall be 0 + +sysclk + Describes the PLLDIVn divider clocks that provide the SYSCLKn clock + domains. The node name must be "sysclk". Consumers of this node should + use "n" in "SYSCLKn" as the index parameter for the clock cell. + + Required properties: + - #clock-cells: shall be 1 + +auxclk + Describes the AUXCLK output of the PLL. The node name must be "auxclk". + This child node is only valid when compatible = "ti,da850-pll0". + + Required properties: + - #clock-cells: shall be 0 + +obsclk + Describes the OBSCLK output of the PLL. The node name must be "obsclk". + + Required properties: + - #clock-cells: shall be 0 + + +Examples: + + pll0: clock-controller@11000 { + compatible = "ti,da850-pll0"; + reg = <0x11000 0x1000>; + clocks = <&ref_clk>, <&pll1_sysclk 3>; + clock-names = "clksrc", "extclksrc"; + ti,clkmode-square-wave; + + pll0_pllout: pllout { + #clock-cells = <0>; + }; + + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + + pll0_auxclk: auxclk { + #clock-cells = <0>; + }; + + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; + + pll1: clock-controller@21a000 { + compatible = "ti,da850-pll1"; + reg = <0x21a000 0x1000>; + clocks = <&ref_clk>; + clock-names = "clksrc"; + + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; + +Also see: +- Documentation/devicetree/bindings/clock/clock-bindings.txt diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt new file mode 100644 index 000000000..5f746ebf7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt @@ -0,0 +1,71 @@ +Binding for TI DaVinci Power Sleep Controller (PSC) + +The PSC provides power management, clock gating and reset functionality. It is +primarily used for clocking. + +Required properties: +- compatible: shall be one of: + - "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX + - "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX +- reg: physical base address and size of the controller's register area +- #clock-cells: from common clock binding; shall be set to 1 +- #power-domain-cells: from generic power domain binding; shall be set to 1. +- clocks: phandles to clocks corresponding to the clock-names property +- clock-names: list of parent clock names - depends on compatible value + - for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", "async1" + - for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3" + +Optional properties: +- #reset-cells: from reset binding; shall be set to 1 - only applicable when + at least one local domain provides a local reset. + +Consumers: + + Clock, power domain and reset consumers shall use the local power domain + module ID (LPSC) as the index corresponding to the clock cell. Refer to + the device-specific datasheet to find these numbers. NB: Most local + domains only provide a clock/power domain and not a reset. + +Examples: + + psc0: clock-controller@10000 { + compatible = "ti,da850-psc0"; + reg = <0x10000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, + <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>; + clock_names = "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", "async1"; + }; + psc1: clock-controller@227000 { + compatible = "ti,da850-psc1"; + reg = <0x227000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>; + clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3"; + }; + + /* consumer */ + dsp: dsp@11800000 { + compatible = "ti,da850-dsp"; + reg = <0x11800000 0x40000>, + <0x11e00000 0x8000>, + <0x11f00000 0x8000>, + <0x01c14044 0x4>, + <0x01c14174 0x8>; + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; + interrupt-parent = <&intc>; + interrupts = <28>; + clocks = <&psc0 15>; + power-domains = <&psc0 15>; + resets = <&psc0 15>; + }; + +Also see: +- Documentation/devicetree/bindings/clock/clock-bindings.txt +- Documentation/devicetree/bindings/power/power-domain.yaml +- Documentation/devicetree/bindings/reset/reset.txt diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt new file mode 100644 index 000000000..9b13b3297 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/divider.txt @@ -0,0 +1,117 @@ +Binding for TI divider clock + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped adjustable clock rate divider that does not gate and has +only one input clock or parent. By default the value programmed into +the register is one less than the actual divisor value. E.g: + +register value actual divisor value +0 1 +1 2 +2 3 + +This assumption may be modified by the following optional properties: + +ti,index-starts-at-one - valid divisor values start at 1, not the default +of 0. E.g: +register value actual divisor value +1 1 +2 2 +3 3 + +ti,index-power-of-two - valid divisor values are powers of two. E.g: +register value actual divisor value +0 1 +1 2 +2 4 + +Additionally an array of valid dividers may be supplied like so: + + ti,dividers = <4>, <8>, <0>, <16>; + +Which will map the resulting values to a divisor table by their index: +register value actual divisor value +0 4 +1 8 +2 <invalid divisor, skipped> +3 16 + +Any zero value in this array means the corresponding bit-value is invalid +and must not be used. + +The binding must also provide the register to control the divider and +unless the divider array is provided, min and max dividers. Optionally +the number of bits to shift that mask, if necessary. If the shift value +is missing it is the same as supplying a zero shift. + +This binding can also optionally provide support to the hardware autoidle +feature, see [2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt + +Required properties: +- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link to phandle of parent clock +- reg : offset for register controlling adjustable divider + +Optional properties: +- clock-output-names : from common clock binding. +- ti,dividers : array of integers defining divisors +- ti,bit-shift : number of bits to shift the divider value, defaults to 0 +- ti,min-div : min divisor for dividing the input clock rate, only + needed if the first divisor is offset from the default value (1) +- ti,max-div : max divisor for dividing the input clock rate, only needed + if ti,dividers is not defined. +- ti,index-starts-at-one : valid divisor programming starts at 1, not zero, + only valid if ti,dividers is not defined. +- ti,index-power-of-two : valid divisor programming must be a power of two, + only valid if ti,dividers is not defined. +- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock, + see [2] +- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0, + see [2] +- ti,set-rate-parent : clk_set_rate is propagated to parent +- ti,latch-bit : latch the divider value to HW, only needed if the register + access requires this. As an example dra76x DPLL_GMAC H14 divider implements + such behavior. + +Examples: +dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_ck>; + ti,max-div = <127>; + reg = <0x190>; + ti,index-starts-at-one; +}; + +aess_fclk: aess_fclk@4a004528 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&abe_clk>; + ti,bit-shift = <24>; + reg = <0x528>; + ti,max-div = <2>; +}; + +dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0134>; + ti,index-starts-at-one; +}; + +ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + reg = <0x0a40>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt new file mode 100644 index 000000000..37a7cb6ad --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -0,0 +1,105 @@ +Binding for Texas Instruments DPLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped DPLL with usually two selectable input clocks +(reference clock and bypass clock), with digital phase locked +loop logic for multiplying the input clock to a desired output +clock. This clock also typically supports different operation +modes (locked, low power stop etc.) This binding has several +sub-types, which effectively result in slightly different setup +for the actual DPLL clock. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of: + "ti,omap3-dpll-clock", + "ti,omap3-dpll-core-clock", + "ti,omap3-dpll-per-clock", + "ti,omap3-dpll-per-j-type-clock", + "ti,omap4-dpll-clock", + "ti,omap4-dpll-x2-clock", + "ti,omap4-dpll-core-clock", + "ti,omap4-dpll-m4xen-clock", + "ti,omap4-dpll-j-type-clock", + "ti,omap5-mpu-dpll-clock", + "ti,am3-dpll-no-gate-clock", + "ti,am3-dpll-j-type-clock", + "ti,am3-dpll-no-gate-j-type-clock", + "ti,am3-dpll-clock", + "ti,am3-dpll-core-clock", + "ti,am3-dpll-x2-clock", + "ti,omap2-dpll-core-clock", + +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks, first entry lists reference clock + and second entry bypass clock +- reg : offsets for the register set for controlling the DPLL. + Registers are listed in following order: + "control" - contains the control register base address + "idlest" - contains the idle status register base address + "mult-div1" - contains the multiplier / divider register base address + "autoidle" - contains the autoidle register base address (optional) + "ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains + the frequency spreading register base address (optional) + "ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains + the modulation frequency register base address + (optional) + ti,am3-* dpll types do not have autoidle register + ti,omap2-* dpll type does not support idlest / autoidle registers + +Optional properties: +- DPLL mode setting - defining any one or more of the following overrides + default setting. + - ti,low-power-stop : DPLL supports low power stop mode, gating output + - ti,low-power-bypass : DPLL output matches rate of parent bypass clock + - ti,lock : DPLL locks in programmed rate + - ti,min-div : the minimum divisor to start from to round the DPLL + target rate + - ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency + spreading in permille (10th of a percent) + - ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread + spectrum modulation frequency + - ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean + to enable the downspread feature + +Examples: + dpll_core_ck: dpll_core_ck@44e00490 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x490>, <0x45c>, <0x488>, <0x468>; + }; + + dpll2_ck: dpll2_ck@48004004 { + #clock-cells = <0>; + compatible = "ti,omap3-dpll-clock"; + clocks = <&sys_ck>, <&dpll2_fck>; + ti,low-power-stop; + ti,low-power-bypass; + ti,lock; + reg = <0x4>, <0x24>, <0x34>, <0x40>; + }; + + dpll_core_ck: dpll_core_ck@44e00490 { + #clock-cells = <0>; + compatible = "ti,am3-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x90>, <0x5c>, <0x68>; + }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; + + dpll_disp_ck: dpll_disp_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt new file mode 100644 index 000000000..68504079f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -0,0 +1,94 @@ +Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC. + +The ATL IP is used to generate clock to be used to synchronize baseband and +audio codec. A single ATL IP provides four ATL clock instances sharing the same +functional clock but can be configured to provide different clocks. +ATL can maintain a clock averages to some desired frequency based on the bws/aws +signals - can compensate the drift between the two ws signal. + +In order to provide the support for ATL and its output clocks (which can be used +internally within the SoC or external components) two sets of bindings is needed: + +Clock tree binding: +This binding uses the common clock binding[1]. +To be able to integrate the ATL clocks with DT clock tree. +Provides ccf level representation of the ATL clocks to be used by drivers. +Since the clock instances are part of a single IP this binding is used as a node +for the DT clock tree, the IP driver is needed to handle the actual configuration +of the IP. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,dra7-atl-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles to functional clock of ATL + +Binding for the IP driver: +This binding is used to configure the IP driver which is going to handle the +configuration of the IP for the ATL clock instances. + +Required properties: +- compatible : shall be "ti,dra7-atl" +- reg : base address for the ATL IP +- ti,provided-clocks : List of phandles to the clocks associated with the ATL +- clocks : link phandles to functional clock of ATL +- clock-names : Shall be set to "fck" +- ti,hwmods : Shall be set to "atl" + +Optional properties: +Configuration of ATL instances: +- atl{0/1/2/3} { + - bws : Baseband word select signal selection + - aws : Audio word select signal selection +}; + +For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include +file. + +Examples: +/* clock bindings for atl provided clocks */ +atl_clkin0_ck: atl_clkin0_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin1_ck: atl_clkin1_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin2_ck: atl_clkin2_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin3_ck: atl_clkin3_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +/* binding for the IP */ +atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; +}; + +#include <dt-bindings/clock/ti-dra7-atl.h> + +&atl { + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt new file mode 100644 index 000000000..c19b3f253 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt @@ -0,0 +1,33 @@ +Binding for Texas Instruments FAPLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped FAPLL with usually two selectable input clocks +(reference clock and bypass clock), and one or more child +syntesizers. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,dm816-fapll-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks (clk-ref and clk-bypass) +- reg : address and length of the register set for controlling the FAPLL. + +Examples: + main_fapll: main_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x400 0x40>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>, <5>, + <6>, <7>; + clock-output-names = "main_pll_clk1", + "main_pll_clk2", + "main_pll_clk3", + "main_pll_clk4", + "main_pll_clk5", + "main_pll_clk6", + "main_pll_clk7"; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt new file mode 100644 index 000000000..518e3c142 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -0,0 +1,44 @@ +Binding for TI fixed factor rate clock sources. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1], and also uses the autoidle +support from TI autoidle clock [2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt + +Required properties: +- compatible : shall be "ti,fixed-factor-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- ti,clock-div: fixed divider. +- ti,clock-mult: fixed multiplier. +- clocks: parent clock. + +Optional properties: +- clock-output-names : from common clock binding. +- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, + see [2] +- reg: offset for the autoidle register of this clock, see [2] +- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2] +- ti,set-rate-parent: clk_set_rate is propagated to parent + +Example: + clock { + compatible = "ti,fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + ti,clock-div = <2>; + ti,clock-mult = <1>; + }; + + dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x01b4>; + ti,clock-mult = <1>; + ti,invert-autoidle-bit; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt new file mode 100644 index 000000000..4982615c0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -0,0 +1,107 @@ +Binding for Texas Instruments gate clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. This clock is +quite much similar to the basic gate-clock [2], however, +it supports a number of additional features. If no register +is provided for this clock, the code assumes that a clockdomain +will be controlled instead and the corresponding hw-ops for +that is used. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml +[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt + +Required properties: +- compatible : shall be one of: + "ti,gate-clock" - basic gate clock + "ti,wait-gate-clock" - gate clock which waits until clock is active before + returning from clk_enable() + "ti,dss-gate-clock" - gate clock with DSS specific hardware handling + "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling + "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional + clock directly from a clockdomain, see [3] how + to map clockdomains properly + "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling, + required for a hardware errata + "ti,composite-gate-clock" - composite gate clock, to be part of composite + clock + "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait + for clock to be active before returning + from clk_enable() +- #clock-cells : from common clock binding; shall be set to 0 +- clocks : link to phandle of parent clock +- reg : offset for register controlling adjustable gate, not needed for + ti,clkdm-gate-clock type + +Optional properties: +- clock-output-names : from common clock binding. +- ti,bit-shift : bit shift for programming the clock gate, invalid for + ti,clkdm-gate-clock type +- ti,set-bit-to-disable : inverts default gate programming. Setting the bit + gates the clock and clearing the bit ungates the clock. + +Examples: + mmchs2_fck: mmchs2_fck@48004a00 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&core_96m_fck>; + reg = <0x0a00>; + ti,bit-shift = <25>; + }; + + uart4_fck_am35xx: uart4_fck_am35xx { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&core_48m_fck>; + reg = <0x0a00>; + ti,bit-shift = <23>; + }; + + dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 { + #clock-cells = <0>; + compatible = "ti,dss-gate-clock"; + clocks = <&dpll4_m4x2_ck>; + reg = <0x0e00>; + ti,bit-shift = <0>; + }; + + emac_ick: emac_ick@4800259c { + #clock-cells = <0>; + compatible = "ti,am35xx-gate-clock"; + clocks = <&ipss_ick>; + reg = <0x059c>; + ti,bit-shift = <1>; + }; + + emu_src_ck: emu_src_ck { + #clock-cells = <0>; + compatible = "ti,clkdm-gate-clock"; + clocks = <&emu_src_mux_ck>; + }; + + dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 { + #clock-cells = <0>; + compatible = "ti,hsdiv-gate-clock"; + clocks = <&dpll4_m2x2_mul_ck>; + ti,bit-shift = <0x1b>; + reg = <0x0d00>; + ti,set-bit-to-disable; + }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt new file mode 100644 index 000000000..d3eb5ca92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -0,0 +1,57 @@ +Binding for Texas Instruments interface clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. This clock is +quite much similar to the basic gate-clock [2], however, +it supports a number of additional features, including +companion clock finding (match corresponding functional gate +clock) and hardware autoidle enable / disable. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml + +Required properties: +- compatible : shall be one of: + "ti,omap3-interface-clock" - basic OMAP3 interface clock + "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware + capability for waiting clock to be ready + "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW + handling + "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling + "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling + "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling + "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW + handling +- #clock-cells : from common clock binding; shall be set to 0 +- clocks : link to phandle of parent clock +- reg : base address for the control register + +Optional properties: +- clock-output-names : from common clock binding. +- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) + +Examples: + aes1_ick: aes1_ick@48004a14 { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&security_l4_ick2>; + reg = <0x48004a14 0x4>; + ti,bit-shift = <3>; + }; + + cam_ick: cam_ick@48004f10 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ick>; + reg = <0x48004f10 0x4>; + ti,bit-shift = <0>; + }; + + ssi_ick_3430es2: ssi_ick_3430es2@48004a10 { + #clock-cells = <0>; + compatible = "ti,omap3-ssi-interface-clock"; + clocks = <&ssi_l4_ick>; + reg = <0x48004a10 0x4>; + ti,bit-shift = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt new file mode 100644 index 000000000..e17425a58 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -0,0 +1,80 @@ +Binding for TI mux clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped multiplexer with multiple input clock signals or +parents, one of which can be selected as output. This clock does not +gate or adjust the parent rate via a divider or multiplier. + +By default the "clocks" property lists the parents in the same order +as they are programmed into the regster. E.g: + + clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; + +results in programming the register as follows: + +register value selected parent clock +0 foo_clock +1 bar_clock +2 baz_clock + +Some clock controller IPs do not allow a value of zero to be programmed +into the register, instead indexing begins at 1. The optional property +"index-starts-at-one" modified the scheme as follows: + +register value selected clock parent +1 foo_clock +2 bar_clock +3 baz_clock + +The binding must provide the register to control the mux. Optionally +the number of bits to shift the control field in the register can be +supplied. If the shift value is missing it is the same as supplying +a zero shift. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks +- reg : register offset for register controlling adjustable mux + +Optional properties: +- clock-output-names : from common clock binding. +- ti,bit-shift : number of bits to shift the bit-mask, defaults to + 0 if not present +- ti,index-starts-at-one : valid input select programming starts at 1, not + zero +- ti,set-rate-parent : clk_set_rate is propagated to parent clock, + not supported by the composite-mux-clock subtype +- ti,latch-bit : latch the mux value to HW, only needed if the register + access requires this. As an example, dra7x DPLL_GMAC H14 muxing + implements such behavior. + +Examples: + +sys_clkin_ck: sys_clkin_ck@4a306110 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; + reg = <0x0110>; + ti,index-starts-at-one; +}; + +abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&sys_32k_ck>; + ti,bit-shift = <24>; + reg = <0x0108>; +}; + +mcbsp5_mux_fck: mcbsp5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x02d8>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml new file mode 100644 index 000000000..c56f911ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI clksel clock + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: | + The TI CLKSEL clocks consist of consist of input clock mux bits, and in some + cases also has divider, multiplier and gate bits. + +properties: + compatible: + const: ti,clksel + + reg: + maxItems: 1 + description: The CLKSEL register range + + '#address-cells': + enum: [ 0, 1, 2 ] + + '#size-cells': + enum: [ 0, 1, 2 ] + + ranges: true + + "#clock-cells": + const: 2 + description: The CLKSEL register and bit offset + +required: + - compatible + - reg + - "#clock-cells" + +additionalProperties: + type: object + +examples: + - | + clksel_gfx_fclk: clock@52c { + compatible = "ti,clksel"; + reg = <0x25c 0x4>; + #clock-cells = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml new file mode 100644 index 000000000..d36558aa3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti5 TMPV770X PLL Controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +description: + Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X. + +properties: + compatible: + const: toshiba,tmpv7708-pipllct + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + description: External reference clock (OSC2) + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + + osc2_clk: osc2-clk { + compatible = "fixed-clock"; + clock-frequency = <20000000>; + #clock-cells = <0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pipllct: clock-controller@24220000 { + compatible = "toshiba,tmpv7708-pipllct"; + reg = <0 0x24220000 0 0x820>; + #clock-cells = <1>; + clocks = <&osc2_clk>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml new file mode 100644 index 000000000..081f85b1e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti5 TMPV770x SMU controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +description: + Toshia Visconti5 SMU (System Management Unit) which supports the clock + and resets on TMPV770x. + +properties: + compatible: + items: + - const: toshiba,tmpv7708-pismu + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pismu: syscon@24200000 { + compatible = "toshiba,tmpv7708-pismu", "syscon"; + reg = <0 0x24200000 0 0x2140>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt new file mode 100644 index 000000000..63f9f1ac3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -0,0 +1,41 @@ +* Clock bindings for Freescale Vybrid VF610 SOC + +Required properties: +- compatible: Should be "fsl,vf610-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +Optional properties: +- clocks: list of clock identifiers which are external input clocks to the + given clock controller. Please refer the next section to find + the input clocks for a given controller. +- clock-names: list of names of clocks which are exteral input clocks to the + given clock controller. + +Input clocks for top clock controller: + - sxosc (external crystal oscillator 32KHz, recommended) + - fxosc (external crystal oscillator 24MHz, recommended) + - audio_ext + - enet_ext + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h +for the full list of VF610 clock IDs. + +Examples: + +clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + #clock-cells = <1>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; +}; + +uart1: serial@40028000 { + compatible = "fsl,vf610-uart"; + reg = <0x40028000 0x1000>; + interrupts = <0 62 0x04>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; +}; diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt new file mode 100644 index 000000000..91d71cc03 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vt8500.txt @@ -0,0 +1,74 @@ +Device Tree Clock bindings for arch-vt8500 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock + "wm,wm8650-pll-clock" - for a WM8650 PLL clock + "wm,wm8750-pll-clock" - for a WM8750 PLL clock + "wm,wm8850-pll-clock" - for a WM8850 PLL clock + "via,vt8500-device-clock" - for a VT/WM device clock + +Required properties for PLL clocks: +- reg : shall be the control register offset from PMC base for the pll clock. +- clocks : shall be the input parent clock phandle for the clock. This should + be the reference clock. +- #clock-cells : from common clock binding; shall be set to 0. + +Required properties for device clocks: +- clocks : shall be the input parent clock phandle for the clock. This should + be a pll output. +- #clock-cells : from common clock binding; shall be set to 0. + + +Device Clocks + +Device clocks are required to have one or both of the following sets of +properties: + + +Gated device clocks: + +Required properties: +- enable-reg : shall be the register offset from PMC base for the enable + register. +- enable-bit : shall be the bit within enable-reg to enable/disable the clock. + + +Divisor device clocks: + +Required property: +- divisor-reg : shall be the register offset from PMC base for the divisor + register. +Optional property: +- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f + if not specified. + + +For example: + +ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; +}; + +plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; +}; + +sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; +}; diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt new file mode 100644 index 000000000..8233e7717 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xgene.txt @@ -0,0 +1,131 @@ +Device Tree Clock bindings for APM X-Gene + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock + "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock + "apm,xgene-pmd-clock" - for a X-Gene PMD clock + "apm,xgene-device-clock" - for a X-Gene device clock + "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock + "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock + +Required properties for SoC or PCP PLL clocks: +- reg : shall be the physical PLL register address for the pll clock. +- clocks : shall be the input parent clock phandle for the clock. This should + be the reference clock. +- #clock-cells : shall be set to 1. +- clock-output-names : shall be the name of the PLL referenced by derive + clock. +Optional properties for PLL clocks: +- clock-names : shall be the name of the PLL. If missing, use the device name. + +Required properties for PMD clocks: +- reg : shall be the physical register address for the pmd clock. +- clocks : shall be the input parent clock phandle for the clock. +- #clock-cells : shall be set to 1. +- clock-output-names : shall be the name of the clock referenced by derive + clock. +Optional properties for PLL clocks: +- clock-names : shall be the name of the clock. If missing, use the device name. + +Required properties for device clocks: +- reg : shall be a list of address and length pairs describing the CSR + reset and/or the divider. Either may be omitted, but at least + one must be present. + - reg-names : shall be a string list describing the reg resource. This + may include "csr-reg" and/or "div-reg". If this property + is not present, the reg property is assumed to describe + only "csr-reg". +- clocks : shall be the input parent clock phandle for the clock. +- #clock-cells : shall be set to 1. +- clock-output-names : shall be the name of the device referenced. +Optional properties for device clocks: +- clock-names : shall be the name of the device clock. If missing, use the + device name. +- csr-offset : Offset to the CSR reset register from the reset address base. + Default is 0. +- csr-mask : CSR reset mask bit. Default is 0xF. +- enable-offset : Offset to the enable register from the reset address base. + Default is 0x8. +- enable-mask : CSR enable mask bit. Default is 0xF. +- divider-offset : Offset to the divider CSR register from the divider base. + Default is 0x0. +- divider-width : Width of the divider register. Default is 0. +- divider-shift : Bit shift of the divider register. Default is 0. + +For example: + + pcppll: pcppll@17000100 { + compatible = "apm,xgene-pcppll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "pcppll"; + reg = <0x0 0x17000100 0x0 0x1000>; + clock-output-names = "pcppll"; + type = <0>; + }; + + pmd0clk: pmd0clk@7e200200 { + compatible = "apm,xgene-pmd-clock"; + #clock-cells = <1>; + clocks = <&pmdpll 0>; + reg = <0x0 0x7e200200 0x0 0x10>; + clock-output-names = "pmd0clk"; + }; + + socpll: socpll@17000120 { + compatible = "apm,xgene-socpll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "socpll"; + reg = <0x0 0x17000120 0x0 0x1000>; + clock-output-names = "socpll"; + type = <1>; + }; + + qmlclk: qmlclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "qmlclk"; + reg = <0x0 0x1703C000 0x0 0x1000>; + reg-name = "csr-reg"; + clock-output-names = "qmlclk"; + }; + + ethclk: ethclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "ethclk"; + reg = <0x0 0x17000000 0x0 0x1000>; + reg-names = "div-reg"; + divider-offset = <0x238>; + divider-width = <0x9>; + divider-shift = <0x0>; + clock-output-names = "ethclk"; + }; + + apbclk: apbclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&ahbclk 0>; + clock-names = "apbclk"; + reg = <0x0 0x1F2AC000 0x0 0x1000 + 0x0 0x1F2AC000 0x0 0x1000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x200>; + enable-offset = <0x8>; + enable-mask = <0x200>; + divider-offset = <0x10>; + divider-width = <0x2>; + divider-shift = <0x0>; + flags = <0x8>; + clock-output-names = "apbclk"; + }; + diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml new file mode 100644 index 000000000..634b7b964 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xilinx clocking wizard + +maintainers: + - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + +description: + The clocking wizard is a soft ip clocking block of Xilinx versal. It + reads required input clock frequencies from the devicetree and acts as clock + clock output. + +properties: + compatible: + enum: + - xlnx,clocking-wizard + - xlnx,clocking-wizard-v5.2 + - xlnx,clocking-wizard-v6.0 + + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + items: + - description: clock input + - description: axi clock + + clock-names: + items: + - const: clk_in1 + - const: s_axi_aclk + + + xlnx,speed-grade: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + description: + Speed grade of the device. Higher the speed grade faster is the FPGA device. + + xlnx,nr-outputs: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8 + description: + Number of outputs. + +required: + - compatible + - reg + - "#clock-cells" + - clocks + - clock-names + - xlnx,speed-grade + - xlnx,nr-outputs + +additionalProperties: false + +examples: + - | + clock-controller@b0000000 { + compatible = "xlnx,clocking-wizard"; + reg = <0xb0000000 0x10000>; + #clock-cells = <1>; + xlnx,speed-grade = <1>; + xlnx,nr-outputs = <6>; + clock-names = "clk_in1", "s_axi_aclk"; + clocks = <&clkc 15>, <&clkc 15>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml new file mode 100644 index 000000000..7cd88bc3a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Versal clock controller + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + - Jolly Shah <jolly.shah@xilinx.com> + - Rajan Vaja <rajan.vaja@xilinx.com> + +description: | + The clock controller is a hardware block of Xilinx versal clock tree. It + reads required input clock frequencies from the devicetree and acts as clock + provider for all clock consumers of PS clocks. + +properties: + compatible: + const: xlnx,versal-clk + + "#clock-cells": + const: 1 + + clocks: + description: List of clock specifiers which are external input + clocks to the given clock controller. + items: + - description: reference clock + - description: alternate reference clock + - description: alternate reference clock for programmable logic + + clock-names: + items: + - const: ref + - const: alt_ref + - const: pl_alt_ref + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + versal_clk: clock-controller { + #clock-cells = <1>; + compatible = "xlnx,versal-clk"; + clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>; + clock-names = "ref", "alt_ref", "pl_alt_ref"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt new file mode 100644 index 000000000..391ee1a60 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt @@ -0,0 +1,63 @@ +-------------------------------------------------------------------------- +Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using +Zynq MPSoC firmware interface +-------------------------------------------------------------------------- +The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock +tree. It reads required input clock frequencies from the devicetree and acts +as clock provider for all clock consumers of PS clocks. + +See clock_bindings.txt for more information on the generic clock bindings. + +Required properties: + - #clock-cells: Must be 1 + - compatible: Must contain: "xlnx,zynqmp-clk" + - clocks: List of clock specifiers which are external input + clocks to the given clock controller. Please refer + the next section to find the input clocks for a + given controller. + - clock-names: List of clock names which are exteral input clocks + to the given clock controller. Please refer to the + clock bindings for more details. + +Input clocks for zynqmp Ultrascale+ clock controller: + +The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock +inputs. These required clock inputs are: + - pss_ref_clk (PS reference clock) + - video_clk (reference clock for video system ) + - pss_alt_ref_clk (alternative PS reference clock) + - aux_ref_clk + - gt_crx_ref_clk (transceiver reference clock) + +The following strings are optional parameters to the 'clock-names' property in +order to provide an optional (E)MIO clock source: + - swdt0_ext_clk + - swdt1_ext_clk + - gem0_emio_clk + - gem1_emio_clk + - gem2_emio_clk + - gem3_emio_clk + - mio_clk_XX # with XX = 00..77 + - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 + + +Output clocks are registered based on clock information received +from firmware. Output clocks indexes are mentioned in +include/dt-bindings/clock/xlnx-zynqmp-clk.h. + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + zynqmp_clk: clock-controller { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt new file mode 100644 index 000000000..d93746cf2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -0,0 +1,110 @@ +Device Tree Clock bindings for the Zynq 7000 EPP + +The Zynq EPP has several different clk providers, each with there own bindings. +The purpose of this document is to document their usage. + +See clock_bindings.txt for more information on the generic clock bindings. +See Chapter 25 of Zynq TRM for more information about Zynq clocks. + +== Clock Controller == +The clock controller is a logical abstraction of Zynq's clock tree. It reads +required input clock frequencies from the devicetree and acts as clock provider +for all clock consumers of PS clocks. + +Required properties: + - #clock-cells : Must be 1 + - compatible : "xlnx,ps7-clkc" + - reg : SLCR offset and size taken via syscon < 0x100 0x100 > + - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ + (usually 33 MHz oscillators are used for Zynq platforms) + - clock-output-names : List of strings used to name the clock outputs. Shall be + a list of the outputs given below. + +Optional properties: + - clocks : as described in the clock bindings + - clock-names : as described in the clock bindings + - fclk-enable : Bit mask to enable FCLKs statically at boot time. + Bit [0..3] correspond to FCLK0..FCLK3. The corresponding + FCLK will only be enabled if it is actually running at + boot time. + +Clock inputs: +The following strings are optional parameters to the 'clock-names' property in +order to provide an optional (E)MIO clock source. + - swdt_ext_clk + - gem0_emio_clk + - gem1_emio_clk + - mio_clk_XX # with XX = 00..53 +... + +Clock outputs: + 0: armpll + 1: ddrpll + 2: iopll + 3: cpu_6or4x + 4: cpu_3or2x + 5: cpu_2x + 6: cpu_1x + 7: ddr2x + 8: ddr3x + 9: dci + 10: lqspi + 11: smc + 12: pcap + 13: gem0 + 14: gem1 + 15: fclk0 + 16: fclk1 + 17: fclk2 + 18: fclk3 + 19: can0 + 20: can1 + 21: sdio0 + 22: sdio1 + 23: uart0 + 24: uart1 + 25: spi0 + 26: spi1 + 27: dma + 28: usb0_aper + 29: usb1_aper + 30: gem0_aper + 31: gem1_aper + 32: sdio0_aper + 33: sdio1_aper + 34: spi0_aper + 35: spi1_aper + 36: can0_aper + 37: can1_aper + 38: i2c0_aper + 39: i2c1_aper + 40: uart0_aper + 41: uart1_aper + 42: gpio_aper + 43: lqspi_aper + 44: smc_aper + 45: swdt + 46: dbg_trc + 47: dbg_apb + +Example: + clkc: clkc@100 { + #clock-cells = <1>; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + reg = <0x100 0x100>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + # optional props + clocks = <&clkc 16>, <&clk_foo>; + clock-names = "gem1_emio_clk", "can_mio_clk_23"; + }; |