diff options
Diffstat (limited to '')
22 files changed, 1960 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml new file mode 100644 index 000000000..d4d585485 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display adaptive ambient light processor + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display adaptive ambient light processor, namely AAL, + is responsible for backlight power saving and sunlight visibility improving. + AAL device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-aal + - mediatek,mt8183-disp-aal + - items: + - enum: + - mediatek,mt2712-disp-aal + - const: mediatek,mt8173-disp-aal + - items: + - enum: + - mediatek,mt8186-disp-aal + - mediatek,mt8192-disp-aal + - mediatek,mt8195-disp-aal + - const: mediatek,mt8183-disp-aal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: AAL Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + aal@14015000 { + compatible = "mediatek,mt8173-disp-aal"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_AAL>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml new file mode 100644 index 000000000..117e3db43 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display color correction + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display color correction, namely CCORR, reproduces correct color + on panels with different color gamut. + CCORR device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8183-disp-ccorr + - items: + - const: mediatek,mt8192-disp-ccorr + - items: + - enum: + - mediatek,mt8195-disp-ccorr + - const: mediatek,mt8192-disp-ccorr + - items: + - enum: + - mediatek,mt8186-disp-ccorr + - const: mediatek,mt8192-disp-ccorr + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: CCORR Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/gce/mt8183-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ccorr0: ccorr@1400f000 { + compatible = "mediatek,mt8183-disp-ccorr"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml new file mode 100644 index 000000000..66288b9f0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI CEC Controller Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI CEC controller handles hotplug detection and CEC communication. + +properties: + compatible: + enum: + - mediatek,mt7623-cec + - mediatek,mt8167-cec + - mediatek,mt8173-cec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0x10013000 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml new file mode 100644 index 000000000..d2f89ee79 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display color processor + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display color processor, namely COLOR, provides hue, luma and + saturation adjustments to get better picture quality and to have one panel + resemble the other in their output characteristics. + COLOR device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt2701-disp-color + - items: + - const: mediatek,mt8167-disp-color + - items: + - const: mediatek,mt8173-disp-color + - items: + - enum: + - mediatek,mt7623-disp-color + - mediatek,mt2712-disp-color + - const: mediatek,mt2701-disp-color + - items: + - enum: + - mediatek,mt8183-disp-color + - mediatek,mt8186-disp-color + - mediatek,mt8192-disp-color + - mediatek,mt8195-disp-color + - const: mediatek,mt8173-disp-color + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: COLOR Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + color0: color@14013000 { + compatible = "mediatek,mt8173-disp-color"; + reg = <0 0x14013000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml new file mode 100644 index 000000000..8ad8187c0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display dither processor + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display dither processor, namely DITHER, works by approximating + unavailable colors with available colors and by mixing and matching available + colors to mimic unavailable ones. + DITHER device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8183-disp-dither + - items: + - enum: + - mediatek,mt8186-disp-dither + - mediatek,mt8192-disp-dither + - mediatek,mt8195-disp-dither + - const: mediatek,mt8183-disp-dither + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: DITHER Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/gce/mt8183-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dither0: dither@14012000 { + compatible = "mediatek,mt8183-disp-dither"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml new file mode 100644 index 000000000..ff781f217 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Port Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + MediaTek DP and eDP are different hardwares and there are some features + which are not supported for eDP. For example, audio is not supported for + eDP. Therefore, we need to use two different compatibles to describe them. + In addition, We just need to enable the power domain of DP, so the clock + of DP is generated by itself and we are not using other PLL to generate + clocks. + +properties: + compatible: + enum: + - mediatek,mt8195-dp-tx + - mediatek,mt8195-edp-tx + + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: efuse data for display port calibration + + nvmem-cell-names: + const: dp_calibration_data + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller, usually dp_intf + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + description: | + number of lanes supported by the hardware. + The possible values: + 0 - For 1 lane enabled in IP. + 0 1 - For 2 lanes enabled in IP. + 0 1 2 3 - For 4 lanes enabled in IP. + minItems: 1 + maxItems: 4 + required: + - data-lanes + + required: + - port@0 + - port@1 + + max-linkrate-mhz: + enum: [ 1620, 2700, 5400, 8100 ] + description: maximum link rate supported by the hardware. + +required: + - compatible + - reg + - interrupts + - ports + - max-linkrate-mhz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + dptx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0x1c600000 0x8000>; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dptx_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + port@1 { + reg = <1>; + dptx_out: endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml new file mode 100644 index 000000000..5bb23e97c --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DPI and DP_INTF Controller + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The MediaTek DPI and DP_INTF function blocks are a sink of the display + subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a + parallel output bus. + +properties: + compatible: + enum: + - mediatek,mt2701-dpi + - mediatek,mt7623-dpi + - mediatek,mt8173-dpi + - mediatek,mt8183-dpi + - mediatek,mt8186-dpi + - mediatek,mt8192-dpi + - mediatek,mt8195-dp-intf + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: Engine Clock + - description: DPI PLL + + clock-names: + items: + - const: pixel + - const: engine + - const: pll + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + items: + - const: default + - const: sleep + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node. This port should be connected to the input port of an + attached HDMI, LVDS or DisplayPort encoder chip. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + + dpi0: dpi@1401d000 { + compatible = "mediatek,mt8173-dpi"; + reg = <0x1401d000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DPI_PIXEL>, + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dpi_pin_func>; + pinctrl-1 = <&dpi_pin_idle>; + + port { + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml new file mode 100644 index 000000000..492488645 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: mediatek display DSC controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The DSC standard is a specification of the algorithms used for + compressing and decompressing image display streams, including + the specification of the syntax and semantics of the compressed + video bit stream. DSC is designed for real-time systems with + real-time compression, transmission, decompression and Display. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8195-disp-dsc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: DSC Wrapper Clock + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + mediatek,gce-client-reg: + description: + The register of client driver can be configured by gce with 4 arguments + defined in this property, such as phandle of gce, subsys id, + register offset and size. + Each subsys id is mapping to a base address of display function blocks + register which is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dsc0: disp_dsc_wrap@1c009000 { + compatible = "mediatek,mt8195-disp-dsc"; + reg = <0 0x1c009000 0 0x1000>; + interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml new file mode 100644 index 000000000..b18d6a57c --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DSI Controller Device Tree Bindings + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + - Jitao Shi <jitao.shi@mediatek.com> + - Xinlei Lee <xinlei.lee@mediatek.com> + +description: | + The MediaTek DSI function block is a sink of the display subsystem and can + drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual- + channel output. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt2701-dsi + - mediatek,mt7623-dsi + - mediatek,mt8167-dsi + - mediatek,mt8173-dsi + - mediatek,mt8183-dsi + - mediatek,mt8186-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Engine Clock + - description: Digital Clock + - description: HS Clock + + clock-names: + items: + - const: engine + - const: digital + - const: hs + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: dphy + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node. This port should be connected to the input + port of an attached DSI panel or DSI-to-eDP encoder chip. + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - phys + - phy-names + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/reset/mt8183-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dsi0: dsi@14014000 { + compatible = "mediatek,mt8183-dsi"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DSI0_MM>, + <&mmsys CLK_MM_DSI0_IF>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>; + phys = <&mipi_tx0>; + phy-names = "dphy"; + port { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml new file mode 100644 index 000000000..a89ea0ea7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display gamma correction + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display gamma correction, namely GAMMA, provides a nonlinear + operation used to adjust luminance in display system. + GAMMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8173-disp-gamma + - items: + - const: mediatek,mt8183-disp-gamma + - items: + - enum: + - mediatek,mt8186-disp-gamma + - mediatek,mt8192-disp-gamma + - mediatek,mt8195-disp-gamma + - const: mediatek,mt8183-disp-gamma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: GAMMA Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + gamma@14016000 { + compatible = "mediatek,mt8173-disp-gamma"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_GAMMA>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml new file mode 100644 index 000000000..b6fcdfb99 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI DDC Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. + +properties: + compatible: + enum: + - mediatek,mt7623-hdmi-ddc + - mediatek,mt8167-hdmi-ddc + - mediatek,mt8173-hdmi-ddc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ddc-i2c + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi_ddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + reg = <0x11012000 0x1c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml new file mode 100644 index 000000000..bdaf0b51e --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI Encoder Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from + its parallel input. + +properties: + compatible: + enum: + - mediatek,mt2701-hdmi + - mediatek,mt7623-hdmi + - mediatek,mt8167-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: HDMI PLL + - description: Bit Clock + - description: S/PDIF Clock + + clock-names: + items: + - const: pixel + - const: pll + - const: bclk + - const: spdif + + phys: + maxItems: 1 + + phy-names: + items: + - const: hdmi + + mediatek,syscon-hdmi: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + items: + - items: + - description: phandle to system configuration registers + - description: register offset in the system configuration registers + description: | + phandle link and register offset to the system configuration registers. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Input port node. This port should be connected to a DPI output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output port node. This port should be connected to the input port of a connector + node that contains a ddc-i2c-bus property, or to the input port of an attached + bridge chip, such as a SlimPort transmitter. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - mediatek,syscon-hdmi + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi0: hdmi@14025000 { + compatible = "mediatek,mt8173-hdmi"; + reg = <0x14025000 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml new file mode 100644 index 000000000..dd12e2ff6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MDP RDMA + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + The MediaTek MDP RDMA stands for Read Direct Memory Access. + It provides real time data to the back-end panel driver, such as DSI, + DPI and DP_INTF. + It contains one line buffer to store the sufficient pixel data. + RDMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details. + +properties: + compatible: + const: mediatek,mt8195-vdo1-rdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: RDMA Clock + + iommus: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - iommus + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + rdma@1c104000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c104000 0 0x1000>; + interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml new file mode 100644 index 000000000..69ba75777 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display merge + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display merge, namely MERGE, is used to merge two slice-per-line + inputs into one side-by-side output. + MERGE device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8173-disp-merge + - items: + - const: mediatek,mt8195-disp-merge + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: + - const: merge + - items: + - const: merge + - const: merge_async + + mediatek,merge-fifo-en: + description: + The setting of merge fifo is mainly provided for the display latency + buffer to ensure that the back-end panel display data will not be + underrun, a little more data is needed in the fifo. + According to the merge fifo settings, when the water level is detected + to be insufficient, it will trigger RDMA sending ultra and preulra + command to SMI to speed up the data rate. + type: boolean + + mediatek,merge-mute: + description: Support mute function. Mute the content of merge output. + type: boolean + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + resets: + description: reset controller + See Documentation/devicetree/bindings/reset/reset.txt for details. + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + merge@14017000 { + compatible = "mediatek,mt8173-disp-merge"; + reg = <0 0x14017000 0 0x1000>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_MERGE>; + clock-names = "merge"; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml new file mode 100644 index 000000000..853fcb9db --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display overdirve + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display overdrive, namely OD, increases the transition values + of pixels between consecutive frames to make LCD rotate faster. + OD device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt2712-disp-od + - items: + - const: mediatek,mt8173-disp-od + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: OD Clock + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + od@14023000 { + compatible = "mediatek,mt8173-disp-od"; + reg = <0 0x14023000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_OD>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml new file mode 100644 index 000000000..4e94f4e94 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display overlay 2 layer + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer + for OVL. + OVL-2L device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8183-disp-ovl-2l + - items: + - const: mediatek,mt8192-disp-ovl-2l + - items: + - enum: + - mediatek,mt8186-disp-ovl-2l + - const: mediatek,mt8192-disp-ovl-2l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: OVL-2L Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ovl_2l0: ovl@14009000 { + compatible = "mediatek,mt8183-disp-ovl-2l"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; + iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml new file mode 100644 index 000000000..a2a27d0ca --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display overlay + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display overlay, namely OVL, can do alpha blending from + the memory. + OVL device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt2701-disp-ovl + - items: + - const: mediatek,mt8173-disp-ovl + - items: + - const: mediatek,mt8183-disp-ovl + - items: + - const: mediatek,mt8192-disp-ovl + - items: + - enum: + - mediatek,mt7623-disp-ovl + - mediatek,mt2712-disp-ovl + - const: mediatek,mt2701-disp-ovl + - items: + - enum: + - mediatek,mt8195-disp-ovl + - const: mediatek,mt8183-disp-ovl + - items: + - enum: + - mediatek,mt8186-disp-ovl + - const: mediatek,mt8192-disp-ovl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: OVL Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ovl0: ovl@1400c000 { + compatible = "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu M4U_PORT_DISP_OVL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml new file mode 100644 index 000000000..654080bfb --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display postmask + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display postmask, namely POSTMASK, provides round corner pattern + generation. + POSTMASK device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8192-disp-postmask + - items: + - enum: + - mediatek,mt8186-disp-postmask + - const: mediatek,mt8192-disp-postmask + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: POSTMASK Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8192-clk.h> + #include <dt-bindings/power/mt8192-power.h> + #include <dt-bindings/gce/mt8192-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + postmask0: postmask@1400d000 { + compatible = "mediatek,mt8192-disp-postmask"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_POSTMASK0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml new file mode 100644 index 000000000..0882ae86e --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Read Direct Memory Access + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek Read Direct Memory Access(RDMA) component used to read the + data into DMA. It provides real time data to the back-end panel + driver, such as DSI, DPI and DP_INTF. + It contains one line buffer to store the sufficient pixel data. + RDMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt2701-disp-rdma + - items: + - const: mediatek,mt8173-disp-rdma + - items: + - const: mediatek,mt8183-disp-rdma + - items: + - const: mediatek,mt8195-disp-rdma + - items: + - enum: + - mediatek,mt7623-disp-rdma + - mediatek,mt2712-disp-rdma + - const: mediatek,mt2701-disp-rdma + - items: + - enum: + - mediatek,mt8186-disp-rdma + - mediatek,mt8192-disp-rdma + - const: mediatek,mt8183-disp-rdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: RDMA Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,rdma-fifo-size: + description: + rdma fifo size may be different even in same SOC, add this property to the + corresponding rdma. + The value below is the Max value which defined in hardware data sheet + mediatek,rdma-fifo-size of mt8173-rdma0 is 8K + mediatek,rdma-fifo-size of mt8183-rdma0 is 5K + mediatek,rdma-fifo-size of mt8183-rdma1 is 2K + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8192, 5120, 2048] + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + rdma0: rdma@1400e000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu M4U_PORT_DISP_RDMA0>; + mediatek,rdma-fifo-size = <8192>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml new file mode 100644 index 000000000..35ace1f32 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display split + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display split, namely SPLIT, is used to split stream to two + encoders. + SPLIT device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8173-disp-split + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: SPLIT Clock + +required: + - compatible + - reg + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + split0: split@14018000 { + compatible = "mediatek,mt8173-disp-split"; + reg = <0 0x14018000 0 0x1000>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_SPLIT0>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml new file mode 100644 index 000000000..b8bb135fe --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display UFOe + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display UFOe stands for Unified Frame Optimization engine. + UFOe can cut the data rate for DSI port which may lead to reduce power + consumption. + UFOe device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8173-disp-ufoe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: UFOe Clock + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufoe@1401a000 { + compatible = "mediatek,mt8173-disp-ufoe"; + reg = <0 0x1401a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_UFOE>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml new file mode 100644 index 000000000..7d7cc1ab5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Write Direct Memory Access + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek Write Direct Memory Access(WDMA) component used to write + the data into DMA. + WDMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8173-disp-wdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: WDMA Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + wdma0: wdma@14011000 { + compatible = "mediatek,mt8173-disp-wdma"; + reg = <0 0x14011000 0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA0>; + iommus = <&iommu M4U_PORT_DISP_WDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; + }; + }; |