diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/example-schema.yaml | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml new file mode 100644 index 000000000..8e1a8b19d --- /dev/null +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -0,0 +1,261 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +# All the top-level keys are standard json-schema keywords except for +# 'maintainers' and 'select' + +# $id is a unique identifier based on the filename. There may or may not be a +# file present at the URL. +$id: http://devicetree.org/schemas/example-schema.yaml# +# $schema is the meta-schema this schema should be validated with. +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: An example schema annotated with jsonschema details + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + A more detailed multi-line description of the binding. + + Details about the hardware device and any links to datasheets can go here. + + Literal blocks are marked with the '|' at the beginning. The end is marked by + indentation less than the first line of the literal block. Lines also cannot + begin with a tab character. + +select: false + # 'select' is a schema applied to a DT node to determine if this binding + # schema should be applied to the node. It is optional and by default the + # possible compatible strings are extracted and used to match. + + # In this case, a 'false' schema will never match. + +properties: + # A dictionary of DT properties for this binding schema + compatible: + # More complicated schema can use oneOf (XOR), anyOf (OR), or allOf (AND) + # to handle different conditions. + # In this case, it's needed to handle a variable number of values as there + # isn't another way to express a constraint of the last string value. + # The boolean schema must be a list of schemas. + oneOf: + - items: + # items is a list of possible values for the property. The number of + # values is determined by the number of elements in the list. + # Order in lists is significant, order in dicts is not + # Must be one of the 1st enums followed by the 2nd enum + # + # Each element in items should be 'enum' or 'const' + - enum: + - vendor,soc4-ip + - vendor,soc3-ip + - vendor,soc2-ip + - enum: + - vendor,soc1-ip + # additionalItems being false is implied + # minItems/maxItems equal to 2 is implied + - items: + # 'const' is just a special case of an enum with a single possible value + - const: vendor,soc1-ip + + reg: + # The core schema already checks that reg values are numbers, so device + # specific schema don't need to do those checks. + # The description of each element defines the order and implicitly defines + # the number of reg entries. + items: + - description: core registers + - description: aux registers + # minItems/maxItems equal to 2 is implied + + reg-names: + # The core schema enforces this (*-names) is a string array + items: + - const: core + - const: aux + + clocks: + # Cases that have only a single entry just need to express that with maxItems + maxItems: 1 + description: bus clock. A description is only needed for a single item if + there's something unique to add. + The items should have a fixed order, so pattern matching names are + discouraged. + + clock-names: + items: + - const: bus + + interrupts: + # Either 1 or 2 interrupts can be present + minItems: 1 + items: + - description: tx or combined interrupt + - description: rx interrupt + description: + A variable number of interrupts warrants a description of what conditions + affect the number of interrupts. Otherwise, descriptions on standard + properties are not necessary. + The items should have a fixed order, so pattern matching names are + discouraged. + + interrupt-names: + # minItems must be specified here because the default would be 2 + minItems: 1 + items: + - const: tx irq + - const: rx irq + + # Property names starting with '#' must be quoted + '#interrupt-cells': + # A simple case where the value must always be '2'. + # The core schema handles that this must be a single integer. + const: 2 + + interrupt-controller: true + # The core checks this is a boolean, so just have to list it here to be + # valid for this binding. + + clock-frequency: + # The type is set in the core schema. Per-device schema only need to set + # constraints on the possible values. + minimum: 100 + maximum: 400000 + # The value that should be used if the property is not present + default: 200 + + foo-gpios: + maxItems: 1 + description: A connection of the 'foo' gpio line. + + # *-supply is always a single phandle, so nothing more to define. + foo-supply: true + + # Vendor-specific properties + # + # Vendor-specific properties have slightly different schema requirements than + # common properties. They must have at least a type definition and + # 'description'. + vendor,int-property: + description: Vendor-specific properties must have a description + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10] + + vendor,bool-property: + description: Vendor-specific properties must have a description. Boolean + properties are one case where the json-schema 'type' keyword can be used + directly. + type: boolean + + vendor,string-array-property: + description: Vendor-specific properties should reference a type in the + core schema. + $ref: /schemas/types.yaml#/definitions/string-array + items: + - enum: [foo, bar] + - enum: [baz, boo] + + vendor,property-in-standard-units-microvolt: + description: Vendor-specific properties having a standard unit suffix + don't need a type. + enum: [ 100, 200, 300 ] + + vendor,int-array-variable-length-and-constrained-values: + description: Array might define what type of elements might be used (e.g. + their range). + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + child-node: + description: Child nodes are just another property from a json-schema + perspective. + type: object # DT nodes are json objects + properties: + vendor,a-child-node-property: + description: Child node properties have all the same schema + requirements. + type: boolean + + required: + - vendor,a-child-node-property + +# Describe the relationship between different properties +dependencies: + # 'vendor,bool-property' is only allowed when 'vendor,string-array-property' + # is present + vendor,bool-property: [ 'vendor,string-array-property' ] + # Expressing 2 properties in both orders means all of the set of properties + # must be present or none of them. + vendor,string-array-property: [ 'vendor,bool-property' ] + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +# if/then schema can be used to handle conditions on a property affecting +# another property. A typical case is a specific 'compatible' value changes the +# constraints on other properties. +# +# For multiple 'if' schema, group them under an 'allOf'. +# +# If the conditionals become too unweldy, then it may be better to just split +# the binding into separate schema documents. +allOf: + - if: + properties: + compatible: + contains: + const: vendor,soc2-ip + then: + required: + - foo-supply + else: + # If otherwise the property is not allowed: + properties: + foo-supply: false + # Altering schema depending on presence of properties is usually done by + # dependencies (see above), however some adjustments might require if: + - if: + required: + - vendor,bool-property + then: + properties: + vendor,int-property: + enum: [2, 4, 6] + +# Ideally, the schema should have this line otherwise any other properties +# present are allowed. There's a few common properties such as 'status' and +# 'pinctrl-*' which are added automatically by the tooling. +# +# This can't be used in cases where another schema is referenced +# (i.e. allOf: [{$ref: ...}]). +# If and only if another schema is referenced and arbitrary children nodes can +# appear, "unevaluatedProperties: false" could be used. A typical example is +# an I2C controller where no name pattern matching for children can be added. +additionalProperties: false + +examples: + # Examples are now compiled with dtc and validated against the schemas + # + # Examples have a default #address-cells and #size-cells value of 1. This can + # be overridden or an appropriate parent bus node should be shown (such as on + # i2c buses). + # + # Any includes used have to be explicitly included. Use 4-space indentation. + - | + node@1000 { + compatible = "vendor,soc4-ip", "vendor,soc1-ip"; + reg = <0x1000 0x80>, + <0x3000 0x80>; + reg-names = "core", "aux"; + interrupts = <10>; + interrupt-controller; + }; |