diff options
Diffstat (limited to '')
5 files changed, 294 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml new file mode 100644 index 000000000..1f9fe15b4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: All Sensors DLH series low voltage digital pressure sensors + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Bindings for the All Sensors DLH series pressure sensors. + + Specifications about the sensors can be found at: + https://www.allsensors.com/cad/DS-0355_Rev_B.PDF + +properties: + compatible: + enum: + - asc,dlhl60d + - asc,dlhl60g + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + description: interrupt mapping for EOC(data ready) pin + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pressure@29 { + compatible = "asc,dlhl60d"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml new file mode 100644 index 000000000..72cd2c2d3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Pressure, temperature and humidity iio sensors with i2c and spi interfaces + + Specifications about the sensor can be found at: + https://www.bosch-sensortec.com/bst/products/all_products/bmp180 + https://www.bosch-sensortec.com/bst/products/all_products/bmp280 + https://www.bosch-sensortec.com/bst/products/all_products/bme280 + https://www.bosch-sensortec.com/bst/products/all_products/bmp380 + +properties: + compatible: + enum: + - bosch,bmp085 + - bosch,bmp180 + - bosch,bmp280 + - bosch,bme280 + - bosch,bmp380 + + reg: + maxItems: 1 + + vddd-supply: + description: + digital voltage regulator (see regulator/regulator.txt) + + vdda-supply: + description: + analog voltage regulator (see regulator/regulator.txt) + + reset-gpios: + description: + A GPIO line handling reset of the sensor. As the line is active low, + it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt) + maxItems: 1 + + interrupts: + description: + interrupt mapping for IRQ (BMP085 only) + maxItems: 1 + +required: + - compatible + - vddd-supply + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml new file mode 100644 index 000000000..69a3759e2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HopeRF HP03 digital pressure/temperature sensors + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Digital pressure and temperature sensor with an I2C interface. + +properties: + compatible: + const: hoperf,hp03 + + reg: + maxItems: 1 + + xclr-gpios: + description: + The XCLR pin is a reset of the ADC in the chip, it must be pulled + HI before the conversion and readout of the value from the ADC + registers and pulled LO afterward. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpios = <&portc 0 0x0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml new file mode 100644 index 000000000..4f0670745 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/meas,ms5611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Measurement Specialities ms5611 and similar pressure sensors + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. + +properties: + compatible: + enum: + - meas,ms5607 + - meas,ms5611 + + reg: + maxItems: 1 + + vdd-supply: true + + spi-max-frequency: + maximum: 20000000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@77 { + compatible = "meas,ms5607"; + reg = <0x77>; + vdd-supply = <&ldo_3v3_gnss>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + pressure@0 { + compatible = "meas,ms5611"; + reg = <0>; + vdd-supply = <&ldo_3v3_gnss>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml new file mode 100644 index 000000000..d6103be03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/murata,zpa2326.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata ZPA2326 pressure sensor + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Pressure sensor from Murata with SPI and I2C bus interfaces. + + +properties: + compatible: + const: murata,zpa2326 + + reg: + maxItems: 1 + + vdd-supply: true + vref-supply: true + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + interrupt-parent = <&gpio>; + interrupts = <12>; + vdd-supply = <&ldo_1v8_gnss>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + pressure@0 { + compatible = "murata,zpa2326"; + reg = <0>; + spi-max-frequency = <500000>; + }; + }; +... |