1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 000000000..da4c9d8b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,43 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible              : "rohm,bu21013_tp"
+ - reg                     : I2C device address
+ - reset-gpios             : GPIO pin enabling (selecting) chip (CS)
+ - interrupt-parent        : the phandle for the gpio controller
+ - interrupts              : (gpio) interrupt to which the chip is connected
+
+Optional properties:
+ - touch-gpios             : GPIO pin registering a touch event
+ - <supply_name>-supply    : Phandle to a regulator supply
+ - touchscreen-size-x      : General touchscreen binding, see [1].
+ - touchscreen-size-y      : General touchscreen binding, see [1].
+ - touchscreen-inverted-x  : General touchscreen binding, see [1].
+ - touchscreen-inverted-y  : General touchscreen binding, see [1].
+ - touchscreen-swapped-x-y : General touchscreen binding, see [1].
+
+[1] All general touchscreen properties are described in
+    Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
+
+Deprecated properties:
+ - rohm,touch-max-x        : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y        : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x             : Flip touch coordinates on the X axis
+ - rohm,flip-y             : Flip touch coordinates on the Y axis
+
+Example:
+
+	i2c@80110000 {
+		bu21013_tp@5c {
+			compatible = "rohm,bu21013_tp";
+			reg = <0x5c>;
+			interrupt-parent = <&gpio2>;
+			interrupts <&20 IRQ_TYPE_LEVEL_LOW>;
+			touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+			touchscreen-size-x = <384>;
+			touchscreen-size-y = <704>;
+			touchscreen-inverted-y;
+		};
+	};