summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml299
1 files changed, 299 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
new file mode 100644
index 000000000..d433e496e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP2+ and K3 Mailbox devices
+
+maintainers:
+ - Suman Anna <s-anna@ti.com>
+
+description: |
+ The OMAP Mailbox hardware facilitates communication between different
+ processors using a queued mailbox interrupt mechanism. The IP block is
+ external to the various processor subsystems and is connected on an
+ interconnect bus. The communication is achieved through a set of registers
+ for message storage and interrupt configuration registers.
+
+ Each mailbox IP block/cluster has a certain number of h/w fifo queues and
+ output interrupt lines. An output interrupt line is routed to an interrupt
+ controller within a processor subsystem, and there can be more than one line
+ going to a specific processor's interrupt controller. The interrupt line
+ connections are fixed for an instance and are dictated by the IP integration
+ into the SoC (excluding the SoCs that have an Interrupt Crossbar or an
+ Interrupt Router IP). Each interrupt line is programmable through a set of
+ interrupt configuration registers, and have a rx and tx interrupt source per
+ h/w fifo. Communication between different processors is achieved through the
+ appropriate programming of the rx and tx interrupt sources on the appropriate
+ interrupt lines.
+
+ The number of h/w fifo queues and interrupt lines dictate the usable
+ registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a
+ single IP instance. DRA7xx has multiple instances with different number of
+ h/w fifo queues and interrupt lines between different instances. The interrupt
+ lines can also be routed to different processor sub-systems on DRA7xx as they
+ are routed through the Crossbar, a kind of interrupt router/multiplexer. The
+ K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and
+ combine multiple clusters into a single IP block present within the Main
+ NavSS. The interrupt lines from all these clusters are multiplexed and routed
+ to different processor subsystems over a limited number of common interrupt
+ output lines of an Interrupt Router. The AM64x SoCS also uses a single IP
+ block comprising of multiple clusters, but the number of clusters are
+ smaller, and the interrupt output lines are connected directly to various
+ processors.
+
+ Mailbox Controller Nodes
+ =========================
+ A Mailbox device node is used to represent a Mailbox IP instance/cluster
+ within a SoC. The sub-mailboxes (actual communication channels) are
+ represented as child nodes of this parent node.
+
+ Mailbox Users
+ ==============
+ A device needing to communicate with a target processor device should specify
+ them using the common mailbox binding properties, "mboxes" and the optional
+ "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt
+ for details). Each value of the mboxes property should contain a phandle to
+ the mailbox controller device node and an args specifier that will be the
+ phandle to the intended sub-mailbox child node to be used for communication.
+ The equivalent "mbox-names" property value can be used to give a name to the
+ communication channel to be used by the client user.
+
+$defs:
+ omap-mbox-descriptor:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The omap-mbox-descriptor is made of up of 3 cells and represents a single
+ uni-directional communication channel. A typical sub-mailbox device uses
+ two such channels - one for transmitting (Tx) and one for receiving (Rx).
+ items:
+ - description:
+ mailbox fifo id used either for transmitting on ti,mbox-tx channel or
+ for receiving on ti,mbox-rx channel (fifo_id). This is the hardware
+ fifo number within a mailbox cluster.
+ - description:
+ irq identifier index number to use from the parent's interrupts data.
+ Should be 0 for most of the cases, a positive index value is seen only
+ on mailboxes that have multiple interrupt lines connected to the MPU
+ processor (irq_id). This is an index number in the listed interrupts
+ property in the DT nodes.
+ - description:
+ mailbox user id for identifying the interrupt line associated with
+ generating a tx/rx fifo interrupt (usr_id). This is the hardware
+ user id number within a mailbox cluster.
+
+ omap-sub-mailbox:
+ type: object
+ description:
+ The omap-sub-mailbox is a child node within a Mailbox controller device
+ node and represents the actual communication channel used to send and
+ receive messages between the host processor and a remote processor. Each
+ child node should have a unique node name across all the different mailbox
+ device nodes.
+
+ properties:
+ ti,mbox-tx:
+ $ref: "#/$defs/omap-mbox-descriptor"
+ description: sub-mailbox descriptor property defining a Tx fifo.
+
+ ti,mbox-rx:
+ $ref: "#/$defs/omap-mbox-descriptor"
+ description: sub-mailbox descriptor property defining a Rx fifo.
+
+ ti,mbox-send-noirq:
+ type: boolean
+ description:
+ Quirk flag to allow the client user of this sub-mailbox to send
+ messages without triggering a Tx ready interrupt, and to control
+ the Tx ticker. Should be used only on sub-mailboxes used to
+ communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs.
+
+ required:
+ - ti,mbox-tx
+ - ti,mbox-rx
+
+properties:
+ compatible:
+ enum:
+ - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs
+ - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs
+ - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs
+ - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs
+ - ti,am64-mailbox # for K3 AM64x SoCs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Contains the interrupt information for the mailbox device. The format is
+ dependent on which interrupt controller the Mailbox device uses. The
+ number of interrupts listed will at most be the value specified in
+ ti,mbox-num-users property, but is usually limited by the number of
+ interrupts reaching the main processor. An interrupt-parent property
+ is required on SoCs where the interrupt lines are connected through a
+ Interrupt Router before reaching the main processor's GIC.
+
+ "#mbox-cells":
+ const: 1
+ description:
+ The specifier is a phandle to an omap-sub-mailbox device.
+
+ ti,mbox-num-users:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of targets (processor devices) that the mailbox device can
+ interrupt.
+
+ ti,mbox-num-fifos:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of h/w fifo queues within the mailbox IP block.
+
+ ti,hwmods:
+ $ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
+ description:
+ Name of the hwmod associated with the mailbox. This should be defined
+ in the mailbox node only if the node is not defined as a child node of
+ a corresponding sysc interconnect node.
+
+ This property is only needed on some legacy OMAP SoCs which have not
+ yet been converted to the ti,sysc interconnect hierarachy, but is
+ otherwise considered obsolete.
+
+patternProperties:
+ "^mbox-[a-z0-9-]+$":
+ $ref: "#/$defs/omap-sub-mailbox"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+ - ti,mbox-num-users
+ - ti,mbox-num-fifos
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,am654-mailbox
+ - ti,am64-mailbox
+ then:
+ properties:
+ ti,mbox-num-users:
+ const: 4
+ ti,mbox-num-fifos:
+ const: 16
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,omap4-mailbox
+ then:
+ properties:
+ ti,mbox-num-users:
+ enum: [3, 4]
+ ti,mbox-num-fifos:
+ enum: [8, 12]
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,omap3-mailbox
+ then:
+ properties:
+ ti,mbox-num-users:
+ const: 2
+ ti,mbox-num-fifos:
+ const: 2
+ interrupts:
+ minItems: 1
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,omap2-mailbox
+ then:
+ properties:
+ ti,mbox-num-users:
+ const: 4
+ ti,mbox-num-fifos:
+ const: 6
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ /* OMAP4 */
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mailbox: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+
+ mbox_ipu: mbox-ipu {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <2 0 0>;
+ };
+ };
+
+ dsp {
+ mboxes = <&mailbox &mbox_dsp>;
+ };
+
+ - |
+ /* AM33xx */
+ mailbox1: mailbox@480c8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480c8000 0x200>;
+ interrupts = <77>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <8>;
+
+ mbox_wkupm3: mbox-wkup-m3 {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <0 0 3>;
+ ti,mbox-send-noirq;
+ };
+ };
+
+ - |
+ /* AM65x */
+ mailbox0_cluster0: mailbox@31f80000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x31f80000 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-tx = <1 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+ };