summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/mfd/st,stmfx.yaml122
1 files changed, 122 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
new file mode 100644
index 000000000..b4d543025
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
+
+description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+ communication with the main MCU. Its main features are GPIO expansion,
+ main MCU IDD measurement (IDD is the amount of current that flows
+ through VDD) and resistive touchscreen controller.
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+ compatible:
+ const: st,stmfx-0300
+
+ reg:
+ enum: [ 0x42, 0x43 ]
+
+ interrupts:
+ maxItems: 1
+
+ drive-open-drain: true
+
+ vdd-supply: true
+
+ pinctrl:
+ type: object
+
+ properties:
+ compatible:
+ const: st,stmfx-0300-pinctrl
+
+ "#gpio-cells":
+ const: 2
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ gpio-ranges:
+ description: if all STMFX pins[24:0] are available (no other STMFX function in use),
+ you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+ if agpio[3:0] are not available (STMFX Touchscreen function in use),
+ you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+ if agpio[7:4] are not available (STMFX IDD function in use),
+ you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+ maxItems: 1
+
+ patternProperties:
+ "^[a-zA-Z]*-pins$":
+ type: object
+ additionalProperties: false
+
+ allOf:
+ - $ref: ../pinctrl/pinmux-node.yaml
+
+ properties:
+ pins: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-pin-default: true
+ bias-pull-down: true
+ drive-open-drain: true
+ drive-push-pull: true
+ output-high: true
+ output-low: true
+
+ additionalProperties: false
+
+ required:
+ - compatible
+ - "#gpio-cells"
+ - "#interrupt-cells"
+ - gpio-controller
+ - interrupt-controller
+ - gpio-ranges
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ stmfx@42 {
+ compatible = "st,stmfx-0300";
+ reg = <0x42>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpioi>;
+ vdd-supply = <&v3v3>;
+
+ stmfx_pinctrl: pinctrl {
+ compatible = "st,stmfx-0300-pinctrl";
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+ joystick_pins: joystick-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+ };
+ };
+...