diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/st,stpmic1.yaml | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml new file mode 100644 index 000000000..426658ad8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -0,0 +1,334 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics STPMIC1 Power Management IC bindings + +description: STMicroelectronics STPMIC1 Power Management IC + +maintainers: + - pascal Paillet <p.paillet@foss.st.com> + +properties: + compatible: + const: st,stpmic1 + + reg: + const: 0x33 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + onkey: + type: object + + $ref: ../input/input.yaml + + properties: + compatible: + const: st,stpmic1-onkey + + interrupts: + items: + - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic + - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic + + interrupt-names: + items: + - const: onkey-falling + - const: onkey-rising + + st,onkey-clear-cc-flag: + description: onkey is able power on after an over-current shutdown event. + $ref: /schemas/types.yaml#/definitions/flag + + st,onkey-pu-inactive: + description: onkey pull up is not active + $ref: /schemas/types.yaml#/definitions/flag + + power-off-time-sec: + minimum: 1 + maximum: 16 + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + watchdog: + type: object + + $ref: ../watchdog/watchdog.yaml + + properties: + compatible: + const: st,stpmic1-wdt + + timeout-sec: true + + required: + - compatible + + additionalProperties: false + + regulators: + type: object + + description: | + Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + Switches are fixed voltage regulators with only enable/disable capability. + + properties: + compatible: + const: st,stpmic1-regulators + + ldo3: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-over-current-protection: true + + additionalProperties: false + + ldo4: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + vref_ddr: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + + additionalProperties: false + + boost: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + patternProperties: + "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + description: STPMIC1 voltage regulators supplies + + "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": + $ref: ../regulator/regulator.yaml + + "^ldo[1-2,5-6]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^buck[1-4]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-initial-mode: true + regulator-pull-down: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^pwr_sw[1-2]$": + type: object + + properties: + interrupts: + maxItems: 1 + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + regulator-active-discharge: true + + additionalProperties: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include <dt-bindings/mfd/st,stpmic1.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + buck1 { + regulator-name = "vdd_core"; + interrupts = <IT_CURLIM_BUCK1 0>; + st,mask-reset; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + + buck4 { + regulator-name = "v3v3"; + interrupts = <IT_CURLIM_BUCK4 0>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; + }; + }; + }; + +... |