summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml')
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml48
1 files changed, 48 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
new file mode 100644
index 000000000..1fc7e620f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple eMMC hardware reset provider binding
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ The purpose of this driver is to perform standard eMMC hw reset
+ procedure, as described by Jedec 4.4 specification. This procedure is
+ performed just after MMC core enabled power to the given mmc host (to
+ fix possible issues if bootloader has left eMMC card in initialized or
+ unknown state), and before performing complete system reboot (also in
+ case of emergency reboot call). The latter is needed on boards, which
+ doesn't have hardware reset logic connected to emmc card and (limited or
+ broken) ROM bootloaders are unable to read second stage from the emmc
+ card if the card is left in unknown or already initialized state.
+
+properties:
+ compatible:
+ const: mmc-pwrseq-emmc
+
+ reset-gpios:
+ minItems: 1
+ description:
+ contains a GPIO specifier. The reset GPIO is asserted
+ and then deasserted to perform eMMC card reset. To perform
+ reset procedure as described in Jedec 4.4 specification, the
+ gpio line should be defined as GPIO_ACTIVE_LOW.
+
+required:
+ - compatible
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+...